diff options
Diffstat (limited to 'arch/avr32')
25 files changed, 2042 insertions, 114 deletions
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 414a8ad97f5..35e3bd9858d 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -144,6 +144,19 @@ config BOARD_FAVR_32 bool "Favr-32 LCD-board" select CPU_AT32AP7000 +config BOARD_MERISC + bool "Merisc board" + select CPU_AT32AP7000 + help + Merisc is the family name for a range of AVR32-based boards. + + The boards are designed to be used in a man-machine + interfacing environment, utilizing a touch-based graphical + user interface. They host a vast range of I/O peripherals as + well as a large SDRAM & Flash memory bank. + + For more information see: http://www.martinsson.se/merisc + config BOARD_MIMC200 bool "MIMC200 CPU board" select CPU_AT32AP7000 @@ -153,6 +166,7 @@ source "arch/avr32/boards/atstk1000/Kconfig" source "arch/avr32/boards/atngw100/Kconfig" source "arch/avr32/boards/hammerhead/Kconfig" source "arch/avr32/boards/favr-32/Kconfig" +source "arch/avr32/boards/merisc/Kconfig" choice prompt "Boot loader type" diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index f3ef3bbf797..c21a3290d54 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -35,6 +35,7 @@ core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ core-$(CONFIG_BOARD_HAMMERHEAD) += arch/avr32/boards/hammerhead/ core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/ +core-$(CONFIG_BOARD_MERISC) += arch/avr32/boards/merisc/ core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ core-y += arch/avr32/kernel/ @@ -42,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c index 8140b22b346..00337112c5a 100644 --- a/arch/avr32/boards/atngw100/evklcd10x.c +++ b/arch/avr32/boards/atngw100/evklcd10x.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/linkage.h> +#include <linux/gpio.h> #include <linux/fb.h> #include <linux/platform_device.h> @@ -19,26 +20,26 @@ #include <asm/setup.h> #include <mach/at32ap700x.h> +#include <mach/portmux.h> #include <mach/board.h> +#include <sound/atmel-ac97c.h> + static struct ac97c_platform_data __initdata ac97c0_data = { - .dma_rx_periph_id = 3, - .dma_tx_periph_id = 4, - .dma_controller_id = 0, - .reset_pin = GPIO_PIN_PB(19), + .reset_pin = GPIO_PIN_PB(19), }; #ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA static struct fb_videomode __initdata tcg057vglad_modes[] = { { - .name = "640x480 @ 60", - .refresh = 60, + .name = "640x480 @ 50", + .refresh = 50, .xres = 640, .yres = 480, .pixclock = KHZ2PICOS(25180), - .left_margin = 64, .right_margin = 31, - .upper_margin = 34, .lower_margin = 2, - .hsync_len = 96, .vsync_len = 4, + .left_margin = 64, .right_margin = 96, + .upper_margin = 34, .lower_margin = 11, + .hsync_len = 64, .vsync_len = 15, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, @@ -69,14 +70,14 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { #elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA static struct fb_videomode __initdata tcg057qvlad_modes[] = { { - .name = "320x240 @ 60", - .refresh = 60, + .name = "320x240 @ 50", + .refresh = 50, .xres = 320, .yres = 240, .pixclock = KHZ2PICOS(6300), - .left_margin = 52, .right_margin = 28, - .upper_margin = 7, .lower_margin = 2, - .hsync_len = 96, .vsync_len = 4, + .left_margin = 34, .right_margin = 46, + .upper_margin = 7, .lower_margin = 15, + .hsync_len = 64, .vsync_len = 12, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, @@ -144,12 +145,29 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { }; #endif +static void atevklcd10x_lcdc_power_control(int on) +{ + gpio_set_value(GPIO_PIN_PB(15), on); +} + static int __init atevklcd10x_init(void) { - at32_add_device_ac97c(0, &ac97c0_data); + /* PB15 is connected to the enable line on the boost regulator + * controlling the backlight for the LCD panel. + */ + at32_select_gpio(GPIO_PIN_PB(15), AT32_GPIOF_OUTPUT); + gpio_request(GPIO_PIN_PB(15), "backlight"); + gpio_direction_output(GPIO_PIN_PB(15), 0); + + atevklcd10x_lcdc_data.atmel_lcdfb_power_control = + atevklcd10x_lcdc_power_control; at32_add_device_lcdc(0, &atevklcd10x_lcdc_data, - fbmem_start, fbmem_size, 1); + fbmem_start, fbmem_size, + ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL); + + at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH); + return 0; } postcore_initcall(atevklcd10x_init); diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 05d3722fff1..5b022aad4bd 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -56,13 +56,8 @@ static struct spi_board_info spi0_board_info[] __initdata = { static struct mci_platform_data __initdata mci0_data = { .slot[0] = { .bus_width = 4, -#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X .detect_pin = GPIO_PIN_PC(25), .wp_pin = GPIO_PIN_PE(0), -#else - .detect_pin = GPIO_PIN_NONE, - .wp_pin = GPIO_PIN_NONE, -#endif }, }; @@ -123,7 +118,7 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 1f33a106905..2adc261c9e3 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -252,12 +252,12 @@ static void __init atstk1002_setup_extdac(void) void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ + at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index b3a23c88bcf..ff7e2329882 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -115,12 +115,12 @@ static void __init atstk1003_setup_extdac(void) void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ + at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 29b35aca96c..69a9f0f08c6 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -120,12 +120,12 @@ static void __init atstk1004_setup_extdac(void) void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ + at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ #else - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 745c408c2ac..46c9b0a224c 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -22,6 +22,8 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <sound/atmel-abdac.h> + #include <video/atmel_lcdc.h> #include <asm/setup.h> @@ -41,6 +43,9 @@ unsigned long at32_board_osc_rates[3] = { /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; +static struct atmel_abdac_pdata __initdata abdac0_data = { +}; + struct eth_addr { u8 addr[6]; }; @@ -245,7 +250,7 @@ static void __init favr32_setup_atmel_pwm_bl(void) void __init setup_board(void) { - at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */ + at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */ at32_setup_serial_console(0); } @@ -326,7 +331,7 @@ static int __init favr32_init(void) spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3)); - set_abdac_rate(at32_add_device_abdac(0)); + set_abdac_rate(at32_add_device_abdac(0, &abdac0_data)); at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel); at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c index 559bbcb03f9..776c3cb9b6e 100644 --- a/arch/avr32/boards/hammerhead/flash.c +++ b/arch/avr32/boards/hammerhead/flash.c @@ -280,13 +280,13 @@ static struct resource hh_fpga0_resource[] = { }, }; -static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK; +static u64 hh_fpga0_dma_mask = DMA_BIT_MASK(32); static struct platform_device hh_fpga0_device = { .name = "hh_fpga", .id = 0, .dev = { .dma_mask = &hh_fpga0_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = hh_fpga0_resource, .num_resources = ARRAY_SIZE(hh_fpga0_resource), diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c index 4d2fe82b202..dd009875a40 100644 --- a/arch/avr32/boards/hammerhead/setup.c +++ b/arch/avr32/boards/hammerhead/setup.c @@ -29,6 +29,8 @@ #include <mach/init.h> #include <mach/portmux.h> +#include <sound/atmel-ac97c.h> + #include "../../mach-at32ap/clock.h" #include "flash.h" @@ -163,7 +165,7 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ at32_setup_serial_console(0); } @@ -233,7 +235,7 @@ static int __init hammerhead_init(void) i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); #ifdef CONFIG_BOARD_HAMMERHEAD_SND - at32_add_device_ac97c(0, &ac97c_data); + at32_add_device_ac97c(0, &ac97c_data, AC97C_BOTH); #endif /* Select the Touchscreen interrupt pin mode */ diff --git a/arch/avr32/boards/merisc/Kconfig b/arch/avr32/boards/merisc/Kconfig new file mode 100644 index 00000000000..7e043275d5a --- /dev/null +++ b/arch/avr32/boards/merisc/Kconfig @@ -0,0 +1,5 @@ +# Merisc customization + +if BOARD_MERISC + +endif # BOARD_MERISC diff --git a/arch/avr32/boards/merisc/Makefile b/arch/avr32/boards/merisc/Makefile new file mode 100644 index 00000000000..d24c78729bd --- /dev/null +++ b/arch/avr32/boards/merisc/Makefile @@ -0,0 +1 @@ +obj-y += setup.o flash.o display.o merisc_sysfs.o diff --git a/arch/avr32/boards/merisc/display.c b/arch/avr32/boards/merisc/display.c new file mode 100644 index 00000000000..85a543cd4ab --- /dev/null +++ b/arch/avr32/boards/merisc/display.c @@ -0,0 +1,65 @@ +/* + * Display setup code for the Merisc board + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <video/atmel_lcdc.h> +#include <asm/setup.h> +#include <mach/board.h> +#include "merisc.h" + +static struct fb_videomode merisc_fb_videomode[] = { + { + .refresh = 44, + .xres = 640, + .yres = 480, + .left_margin = 96, + .right_margin = 96, + .upper_margin = 34, + .lower_margin = 8, + .hsync_len = 64, + .vsync_len = 64, + .name = "640x480 @ 44", + .pixclock = KHZ2PICOS(25180), + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs merisc_fb_monspecs = { + .manufacturer = "Kyo", + .monitor = "TCG075VG2AD", + .modedb = merisc_fb_videomode, + .modedb_len = ARRAY_SIZE(merisc_fb_videomode), + .hfmin = 30000, + .hfmax = 33333, + .vfmin = 60, + .vfmax = 90, + .dclkmax = 30000000, +}; + +struct atmel_lcdfb_info merisc_lcdc_data = { + .default_bpp = 24, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &merisc_fb_monspecs, + .guard_time = 2, +}; + +static int __init merisc_display_init(void) +{ + at32_add_device_lcdc(0, &merisc_lcdc_data, fbmem_start, + fbmem_size, 0); + + return 0; +} +device_initcall(merisc_display_init); diff --git a/arch/avr32/boards/merisc/flash.c b/arch/avr32/boards/merisc/flash.c new file mode 100644 index 00000000000..8e856fd6f01 --- /dev/null +++ b/arch/avr32/boards/merisc/flash.c @@ -0,0 +1,139 @@ +/* + * Merisc board-specific flash initialization + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <mach/smc.h> + +/* Will be translated to units of 14.3 ns, rounded up */ +static struct smc_timing flash_timing __initdata = { + .ncs_read_setup = 1 * 14, + .nrd_setup = 5 * 14, + .ncs_write_setup = 1 * 14, + .nwe_setup = 2 * 14, + + .ncs_read_pulse = 12 * 14, + .nrd_pulse = 7 * 14, + .ncs_write_pulse = 8 * 14, + .nwe_pulse = 4 * 14, + + .read_cycle = 14 * 14, + .write_cycle = 10 * 14, +}; + +static struct smc_config flash_config __initdata = { + .bus_width = 2, + .nrd_controlled = 1, + .nwe_controlled = 1, + .byte_write = 1, + .tdf_cycles = 3, +}; + +static struct mtd_partition flash_0_parts[] = { + { + .name = "boot", + .offset = 0x00000000, + .size = 0x00060000, + .mask_flags = 0, + }, + { + .name = "kernel", + .offset = 0x00060000, + .size = 0x00200000, + .mask_flags = 0, + }, + { + .name = "root", + .offset = 0x00260000, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct mtd_partition flash_1_parts[] = { + { + .name = "2ndflash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct physmap_flash_data flash_data[] = { + { + .width = 2, + .nr_parts = ARRAY_SIZE(flash_0_parts), + .parts = flash_0_parts, + }, + { + .width = 2, + .nr_parts = ARRAY_SIZE(flash_1_parts), + .parts = flash_1_parts, + } +}; + +static struct resource flash_resource[] = { + { + .start = 0x00000000, + .end = 0x03ffffff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x04000000, + .end = 0x07ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device flash_device[] = { + { + .name = "physmap-flash", + .id = 0, + .resource = &flash_resource[0], + .num_resources = 1, + .dev = { + .platform_data = &flash_data[0], + }, + }, + { + .name = "physmap-flash", + .id = 1, + .resource = &flash_resource[1], + .num_resources = 1, + .dev = { + .platform_data = &flash_data[1], + }, + }, +}; + +static int __init merisc_flash_init(void) +{ + int ret; + smc_set_timing(&flash_config, &flash_timing); + + ret = smc_set_configuration(0, &flash_config); + if (ret < 0) { + printk(KERN_ERR "Merisc: failed to set NOR flash timing #0\n"); + return ret; + } + + ret = smc_set_configuration(4, &flash_config); + if (ret < 0) { + printk(KERN_ERR "Merisc: failed to set NOR flash timing #1\n"); + return ret; + } + + platform_device_register(&flash_device[0]); + platform_device_register(&flash_device[1]); + return 0; +} +device_initcall(merisc_flash_init); diff --git a/arch/avr32/boards/merisc/merisc.h b/arch/avr32/boards/merisc/merisc.h new file mode 100644 index 00000000000..50ffb2f3fcb --- /dev/null +++ b/arch/avr32/boards/merisc/merisc.h @@ -0,0 +1,18 @@ +/* + * Merisc exports + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AVR32_BOARDS_MERISC_MERISC_H +#define __ARCH_AVR32_BOARDS_MERISC_MERISC_H + +const char *merisc_revision(void); +const char *merisc_model(void); + +extern struct class merisc_class; + +#endif /* __ARCH_AVR32_BOARDS_MERISC_MERISC_H */ diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c new file mode 100644 index 00000000000..df431fdba9a --- /dev/null +++ b/arch/avr32/boards/merisc/merisc_sysfs.c @@ -0,0 +1,65 @@ +/* + * Merisc sysfs exports + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/timer.h> +#include <linux/err.h> +#include <linux/ctype.h> +#include "merisc.h" + +static ssize_t merisc_model_show(struct class *class, char *buf) +{ + ssize_t ret = 0; + + sprintf(buf, "%s\n", merisc_model()); + ret = strlen(buf) + 1; + + return ret; +} + +static ssize_t merisc_revision_show(struct class *class, char *buf) +{ + ssize_t ret = 0; + + sprintf(buf, "%s\n", merisc_revision()); + ret = strlen(buf) + 1; + + return ret; +} + +static struct class_attribute merisc_class_attrs[] = { + __ATTR(model, S_IRUGO, merisc_model_show, NULL), + __ATTR(revision, S_IRUGO, merisc_revision_show, NULL), + __ATTR_NULL, +}; + +struct class merisc_class = { + .name = "merisc", + .owner = THIS_MODULE, + .class_attrs = merisc_class_attrs, +}; + +static int __init merisc_sysfs_init(void) +{ + int status; + + status = class_register(&merisc_class); + if (status < 0) + return status; + + return 0; +} + +postcore_initcall(merisc_sysfs_init); diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c new file mode 100644 index 00000000000..20b300cf105 --- /dev/null +++ b/arch/avr32/boards/merisc/setup.c @@ -0,0 +1,297 @@ +/* + * Board-specific setup code for the Merisc + * + * Copyright (C) 2008 Martinsson Elektronik AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/etherdevice.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/irq.h> +#include <linux/fb.h> +#include <linux/atmel-mci.h> + +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/gpio.h> + +#include <mach/at32ap700x.h> +#include <mach/board.h> +#include <mach/init.h> +#include <mach/portmux.h> + +#include "merisc.h" + +/* Holds the autodetected board model and revision */ +static int merisc_board_id; + +/* Initialized by bootloader-specific startup code. */ +struct tag *bootloader_tags __initdata; + +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + +struct eth_addr { + u8 addr[6]; +}; + +static struct eth_addr __initdata hw_addr[2]; +static struct eth_platform_data __initdata eth_data[2]; + +static int ads7846_get_pendown_state_PB26(void) +{ + return !gpio_get_value(GPIO_PIN_PB(26)); +} + +static int ads7846_get_pendown_state_PB28(void) +{ + return !gpio_get_value(GPIO_PIN_PB(28)); +} + +static struct ads7846_platform_data __initdata ads7846_data = { + .model = 7846, + .vref_delay_usecs = 100, + .vref_mv = 0, + .keep_vref_on = 0, + .settle_delay_usecs = 150, + .penirq_recheck_delay_usecs = 1, + .x_plate_ohms = 800, + .debounce_rep = 4, + .debounce_max = 10, + .debounce_tol = 50, + .get_pendown_state = ads7846_get_pendown_state_PB26, + .filter_init = NULL, + .filter = NULL, + .filter_cleanup = NULL, +}; + +static struct spi_board_info __initdata spi0_board_info[] = { + { + .modalias = "ads7846", + .max_speed_hz = 3250000, + .chip_select = 0, + .bus_num = 0, + .platform_data = &ads7846_data, + .mode = SPI_MODE_0, + }, +}; + +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = GPIO_PIN_PE(19), + .wp_pin = GPIO_PIN_PE(20), + }, +}; + +static int __init parse_tag_ethernet(struct tag *tag) +{ + int i; + + i = tag->u.ethernet.mac_index; + if (i < ARRAY_SIZE(hw_addr)) { + memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, + sizeof(hw_addr[i].addr)); + } + + return 0; +} +__tagtable(ATAG_ETHERNET, parse_tag_ethernet); + +static void __init set_hw_addr(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const u8 *addr; + void __iomem *regs; + struct clk *pclk; + + if (!res) + return; + + if (pdev->id >= ARRAY_SIZE(hw_addr)) + return; + + addr = hw_addr[pdev->id].addr; + if (!is_valid_ether_addr(addr)) + return; + + regs = (void __iomem __force *)res->start; + pclk = clk_get(&pdev->dev, "pclk"); + if (!pclk) + return; + + clk_enable(pclk); + __raw_writel((addr[3] << 24) | (addr[2] << 16) + | (addr[1] << 8) | addr[0], regs + 0x98); + __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); + clk_disable(pclk); + clk_put(pclk); +} + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PIN_PA(6), + .scl_pin = GPIO_PIN_PA(7), + .sda_is_open_drain = 1, + .scl_is_open_drain = 1, + .udelay = 2, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51) + }, +}; + +#ifdef CONFIG_LEDS_ATMEL_PWM +static struct gpio_led stk_pwm_led[] = { + { + .name = "backlight", + .gpio = 0, /* PWM channel 0 (LCD backlight) */ + }, +}; + +static struct gpio_led_platform_data stk_pwm_led_data = { + .num_leds = ARRAY_SIZE(stk_pwm_led), + .leds = stk_pwm_led, +}; + +static struct platform_device stk_pwm_led_dev = { + .name = "leds-atmel-pwm", + .id = -1, + .dev = { + .platform_data = &stk_pwm_led_data, + }, +}; +#endif + +const char *merisc_model(void) +{ + switch (merisc_board_id) { + case 0: + case 1: + return "500-01"; + case 2: + return "BT"; + default: + return "Unknown"; + } +} + +const char *merisc_revision(void) +{ + switch (merisc_board_id) { + case 0: + return "B"; + case 1: + return "D"; + case 2: + return "A"; + default: + return "Unknown"; + } +} + +static void detect_merisc_board_id(void) +{ + /* Board ID pins MUST be set as input or the board may be damaged */ + at32_select_gpio(GPIO_PIN_PA(24), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(25), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(26), AT32_GPIOF_PULLUP); + at32_select_gpio(GPIO_PIN_PA(27), AT32_GPIOF_PULLUP); + + merisc_board_id = !gpio_get_value(GPIO_PIN_PA(24)) + + !gpio_get_value(GPIO_PIN_PA(25)) * 2 + + !gpio_get_value(GPIO_PIN_PA(26)) * 4 + + !gpio_get_value(GPIO_PIN_PA(27)) * 8; +} + +void __init setup_board(void) +{ + at32_map_usart(0, 0, 0); + at32_map_usart(1, 1, 0); + at32_map_usart(3, 3, 0); + at32_setup_serial_console(1); +} + +static int __init merisc_init(void) +{ + detect_merisc_board_id(); + + printk(KERN_NOTICE "BOARD: Merisc %s revision %s\n", merisc_model(), + merisc_revision()); + + /* Reserve pins for SDRAM */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26)); + + if (merisc_board_id >= 1) + at32_map_usart(2, 2, 0); + + at32_add_device_usart(0); + at32_add_device_usart(1); + if (merisc_board_id >= 1) + at32_add_device_usart(2); + at32_add_device_usart(3); + set_hw_addr(at32_add_device_eth(0, ð_data[0])); + + /* ADS7846 PENIRQ */ + if (merisc_board_id == 0) { + ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB26; + at32_select_periph(GPIO_PIOB_BASE, 1 << 26, + GPIO_PERIPH_A, AT32_GPIOF_PULLUP); + spi0_board_info[0].irq = AT32_EXTINT(1); + } else { + ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB28; + at32_select_periph(GPIO_PIOB_BASE, 1 << 28, GPIO_PERIPH_A, + AT32_GPIOF_PULLUP); + spi0_board_info[0].irq = AT32_EXTINT(3); + } + + /* ADS7846 busy pin */ + at32_select_gpio(GPIO_PIN_PA(4), AT32_GPIOF_PULLUP); + + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); + + at32_add_device_mci(0, &mci0_data); + +#ifdef CONFIG_LEDS_ATMEL_PWM + at32_add_device_pwm((1 << 0) | (1 << 2)); + platform_device_register(&stk_pwm_led_dev); +#else + at32_add_device_pwm((1 << 2)); +#endif + + at32_select_gpio(i2c_gpio_data.sda_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(i2c_gpio_data.scl_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + platform_device_register(&i2c_gpio_device); + + i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); + + return 0; +} +postcore_initcall(merisc_init); diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c index 2b58d61f0af..c1b2175b4fe 100644 --- a/arch/avr32/boards/mimc200/setup.c +++ b/arch/avr32/boards/mimc200/setup.c @@ -175,10 +175,10 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ - at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */ - at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */ - at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ + at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ + at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */ + at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */ + at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ } static struct i2c_gpio_platform_data i2c_gpio_data = { diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig new file mode 100644 index 00000000000..41554db4877 --- /dev/null +++ b/arch/avr32/configs/merisc_defconfig @@ -0,0 +1,1237 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc1 +# Wed Mar 25 14:06:15 2009 +# +CONFIG_AVR32=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_FREEZER is not set + +# +# System Type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SUBARCH_AVR32B=y +CONFIG_MMU=y +CONFIG_PERFORMANCE_COUNTERS=y +CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP700X=y +CONFIG_CPU_AT32AP7000=y +# CONFIG_BOARD_ATSTK1000 is not set +# CONFIG_BOARD_ATNGW100 is not set +# CONFIG_BOARD_HAMMERHEAD is not set +# CONFIG_BOARD_FAVR_32 is not set +# CONFIG_BOARD_MIMC200 is not set +CONFIG_BOARD_MERISC=y +CONFIG_LOADER_U_BOOT=y + +# +# Atmel AVR32 AP options +# +CONFIG_AP700X_32_BIT_SMC=y +# CONFIG_AP700X_16_BIT_SMC is not set +# CONFIG_AP700X_8_BIT_SMC is not set +CONFIG_LOAD_ADDRESS=0x10000000 +CONFIG_ENTRY_ADDRESS=0x90000000 +CONFIG_PHYS_OFFSET=0x10000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y +# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set +# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set +# CONFIG_NEED_NODE_MEMMAP_SIZE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_OWNERSHIP_TRACE is not set +# CONFIG_NMI_DEBUGGING is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_CMDLINE="" + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y + +# +# CAN Device Drivers +# +# CONFIG_CAN_VCAN is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +CONFIG_MTD_ABSENT=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +# CONFIG_ATMEL_TCLIB is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MACB=y +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_AT32AP700X_WDT is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_ATMELMCI_DMA=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_ATMEL_PWM=y +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_AT32AP700X is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_DW_DMAC=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/avr32/include/asm/ftrace.h b/arch/avr32/include/asm/ftrace.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/arch/avr32/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/avr32/include/asm/hardirq.h b/arch/avr32/include/asm/hardirq.h index 267354356f6..015bc75ea79 100644 --- a/arch/avr32/include/asm/hardirq.h +++ b/arch/avr32/include/asm/hardirq.h @@ -20,15 +20,4 @@ void ack_bad_irq(unsigned int irq); #endif /* __ASSEMBLY__ */ -#define HARDIRQ_BITS 12 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - #endif /* __ASM_AVR32_HARDIRQ_H */ diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 0ff46bf873b..f27aa3b259f 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -18,7 +18,7 @@ #include <mach/pm.h> -static cycle_t read_cycle_count(void) +static cycle_t read_cycle_count(struct clocksource *cs) { return (cycle_t)sysreg_read(COUNT); } diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 3fbfd1e32a9..eb9d4dc2e86 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -26,6 +26,9 @@ #include <mach/portmux.h> #include <mach/sram.h> +#include <sound/atmel-abdac.h> +#include <sound/atmel-ac97c.h> + #include <video/atmel_lcdc.h> #include "clock.h" @@ -57,26 +60,26 @@ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more. */ #define DEFINE_DEV(_name, _id) \ -static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ static struct platform_device _name##_id##_device = { \ .name = #_name, \ .id = _id, \ .dev = { \ .dma_mask = &_name##_id##_dma_mask, \ - .coherent_dma_mask = DMA_32BIT_MASK, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ }, \ .resource = _name##_id##_resource, \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ } #define DEFINE_DEV_DATA(_name, _id) \ -static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ static struct platform_device _name##_id##_device = { \ .name = #_name, \ .id = _id, \ .dev = { \ .dma_mask = &_name##_id##_dma_mask, \ .platform_data = &_name##_id##_data, \ - .coherent_dma_mask = DMA_32BIT_MASK, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ }, \ .resource = _name##_id##_resource, \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ @@ -963,56 +966,68 @@ static struct resource atmel_usart3_resource[] = { DEFINE_DEV_DATA(atmel_usart, 3); DEV_CLK(usart, atmel_usart3, pba, 6); -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(int flags) { u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10); select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(int flags) { u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16); select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); } -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(int flags) { u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28); select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(int flags) { u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19); select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static struct platform_device *__initdata at32_usarts[4]; -void __init at32_map_usart(unsigned int hw_id, unsigned int line) +void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; switch (hw_id) { case 0: pdev = &atmel_usart0_device; - configure_usart0_pins(); + configure_usart0_pins(flags); break; case 1: pdev = &atmel_usart1_device; - configure_usart1_pins(); + configure_usart1_pins(flags); break; case 2: pdev = &atmel_usart2_device; - configure_usart2_pins(); + configure_usart2_pins(flags); break; case 3: pdev = &atmel_usart3_device; - configure_usart3_pins(); + configure_usart3_pins(flags); break; default: return; @@ -1753,7 +1768,7 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data) if (platform_device_add_data(pdev, data, sizeof(usba_data))) goto out_free_pdev; - if (data->vbus_pin >= 0) + if (gpio_is_valid(data->vbus_pin)) at32_select_gpio(data->vbus_pin, 0); usba0_pclk.dev = &pdev->dev; @@ -1980,11 +1995,14 @@ static struct clk atmel_ac97c0_pclk = { }; struct platform_device *__init -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags) { - struct platform_device *pdev; - struct ac97c_platform_data _data; - u32 pin_mask; + struct platform_device *pdev; + struct dw_dma_slave *rx_dws; + struct dw_dma_slave *tx_dws; + struct ac97c_platform_data _data; + u32 pin_mask; if (id != 0) return NULL; @@ -1995,37 +2013,52 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) if (platform_device_add_resources(pdev, atmel_ac97c0_resource, ARRAY_SIZE(atmel_ac97c0_resource))) - goto fail; + goto out_free_resources; if (!data) { data = &_data; memset(data, 0, sizeof(struct ac97c_platform_data)); - data->reset_pin = GPIO_PIN_NONE; + data->reset_pin = -ENODEV; } - data->dma_rx_periph_id = 3; - data->dma_tx_periph_id = 4; - data->dma_controller_id = 0; + rx_dws = &data->rx_dws; + tx_dws = &data->tx_dws; + + /* Check if DMA slave interface for capture should be configured. */ + if (flags & AC97C_CAPTURE) { + rx_dws->dma_dev = &dw_dmac0_device.dev; + rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; + rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); + rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + } + + /* Check if DMA slave interface for playback should be configured. */ + if (flags & AC97C_PLAYBACK) { + tx_dws->dma_dev = &dw_dmac0_device.dev; + tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; + tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); + tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + } if (platform_device_add_data(pdev, data, sizeof(struct ac97c_platform_data))) - goto fail; + goto out_free_resources; - pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */ - pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */ + /* SDO | SYNC | SCLK | SDI */ + pin_mask = (1 << 20) | (1 << 21) | (1 << 22) | (1 << 23); select_peripheral(PIOB, pin_mask, PERIPH_B, 0); - /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ - if (data->reset_pin != GPIO_PIN_NONE) - at32_select_gpio(data->reset_pin, 0); + if (gpio_is_valid(data->reset_pin)) + at32_select_gpio(data->reset_pin, AT32_GPIOF_OUTPUT + | AT32_GPIOF_HIGH); atmel_ac97c0_pclk.dev = &pdev->dev; platform_device_add(pdev); return pdev; -fail: +out_free_resources: platform_device_put(pdev); return NULL; } @@ -2053,21 +2086,34 @@ static struct clk abdac0_sample_clk = { .index = 6, }; -struct platform_device *__init at32_add_device_abdac(unsigned int id) +struct platform_device *__init +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) { - struct platform_device *pdev; - u32 pin_mask; + struct platform_device *pdev; + struct dw_dma_slave *dws; + u32 pin_mask; - if (id != 0) + if (id != 0 || !data) return NULL; - pdev = platform_device_alloc("abdac", id); + pdev = platform_device_alloc("atmel_abdac", id); if (!pdev) return NULL; if (platform_device_add_resources(pdev, abdac0_resource, ARRAY_SIZE(abdac0_resource))) - goto err_add_resources; + goto out_free_resources; + + dws = &data->dws; + + dws->dma_dev = &dw_dmac0_device.dev; + dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT; + dws->cfg_hi = DWC_CFGH_DST_PER(2); + dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + + if (platform_device_add_data(pdev, data, + sizeof(struct atmel_abdac_pdata))) + goto out_free_resources; pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */ pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */ @@ -2080,7 +2126,7 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id) platform_device_add(pdev); return pdev; -err_add_resources: +out_free_resources: platform_device_put(pdev); return NULL; } diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h index 5c4c971eed8..b9222bf895b 100644 --- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -171,25 +171,49 @@ ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) -#define ATMEL_LCDC_PRI_15B_DATA ( \ - ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ +#define ATMEL_LCDC_PRI_18B_DATA ( \ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ - ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ - ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \ - ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \ - ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20)) + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) -#define ATMEL_LCDC_ALT_15B_DATA ( \ - ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ +#define ATMEL_LCDC_ALT_18B_DATA ( \ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ - ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ - ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \ - ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \ - ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20)) + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_15B_DATA ( \ + ATMEL_LCDC(PC, DATA3) | ATMEL_LCDC(PC, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA11) | ATMEL_LCDC(PD, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20) | \ + ATMEL_LCDC(PD, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_15B_DATA ( \ + ATMEL_LCDC(PE, DATA3) | ATMEL_LCDC(PE, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA11) | ATMEL_LCDC(PE, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20) | \ + ATMEL_LCDC(PE, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) #define ATMEL_LCDC_PRI_CONTROL ( \ ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \ @@ -207,6 +231,10 @@ #define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA) +#define ATMEL_LCDC_PRI_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_18B_DATA) + +#define ATMEL_LCDC_ALT_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_18B_DATA) + #define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA) #define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index cff8e84f78f..0b816428189 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -13,7 +13,7 @@ * in this array is chip-dependent. */ extern unsigned long at32_board_osc_rates[]; - + /* * This used to add essential system devices, but this is now done * automatically. Please don't use it in new board code. @@ -26,12 +26,17 @@ static inline void __deprecated at32_add_system_devices(void) #define ATMEL_MAX_UART 4 extern struct platform_device *atmel_default_console_device; +/* Flags for selecting USART extra pins */ +#define ATMEL_USART_RTS 0x01 +#define ATMEL_USART_CTS 0x02 +#define ATMEL_USART_CLK 0x03 + struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ }; -void at32_map_usart(unsigned int hw_id, unsigned int line); +void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); struct eth_platform_data { @@ -88,16 +93,15 @@ struct mci_platform_data; struct platform_device * at32_add_device_mci(unsigned int id, struct mci_platform_data *data); -struct ac97c_platform_data { - unsigned short dma_rx_periph_id; - unsigned short dma_tx_periph_id; - unsigned short dma_controller_id; - int reset_pin; -}; +struct ac97c_platform_data; +struct platform_device * +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags); + +struct atmel_abdac_pdata; struct platform_device * -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data); +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data); -struct platform_device *at32_add_device_abdac(unsigned int id); struct platform_device *at32_add_device_psif(unsigned int id); struct cf_platform_data { |