diff options
Diffstat (limited to 'arch/blackfin/mach-bf527/include')
| -rw-r--r-- | arch/blackfin/mach-bf527/include/mach/anomaly.h | 160 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf527/include/mach/bf527.h | 21 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 6 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf527/include/mach/defBF52x_base.h | 27 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf527/include/mach/portmux.h | 4 |
5 files changed, 166 insertions, 52 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index b7b166f4f06..62373e61c58 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -7,12 +7,24 @@ */ /* This file shoule be up to date with: - * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ +#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) +# define ANOMALY_BF526 1 +#else +# define ANOMALY_BF526 0 +#endif +#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__) +# define ANOMALY_BF527 1 +#else +# define ANOMALY_BF527 0 +#endif + /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ @@ -23,68 +35,124 @@ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) -/* New Feature: EMAC TX DMA Word Alignment */ -#define ANOMALY_05000285 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) /* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (1) +#define ANOMALY_05000312 (ANOMALY_BF527) +/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ +#define ANOMALY_05000313 (__SILICON_REVISION__ < 2) /* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (1) +#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (1) +#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ -#define ANOMALY_05000341 (1) +#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ -#define ANOMALY_05000342 (1) +#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* USB Calibration Value Is Not Initialized */ -#define ANOMALY_05000346 (1) +#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* USB Calibration Value to use */ +#define ANOMALY_05000346_value 0xE510 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (1) +#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Security Features Are Not Functional */ -#define ANOMALY_05000348 (__SILICON_REVISION__ < 1) +#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1) +/* bfrom_SysControl() Firmware Function Performs Improper System Reset */ +#define ANOMALY_05000353 (ANOMALY_BF526) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ -#define ANOMALY_05000355 (1) +#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ -#define ANOMALY_05000357 (1) +#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Incorrect Revision Number in DSPID Register */ -#define ANOMALY_05000364 (__SILICON_REVISION__ > 0) +#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) -/* New Feature: Higher Default CCLK Rate */ -#define ANOMALY_05000368 (1) +/* Incorrect Default CSEL Value in PLL_DIV */ +#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ -#define ANOMALY_05000371 (1) +#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Authentication Fails To Initiate */ -#define ANOMALY_05000376 (__SILICON_REVISION__ > 0) +#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* Data Read From L3 Memory by USB DMA May be Corrupted */ -#define ANOMALY_05000380 (1) -/* USB Full-speed Mode not Fully Tested */ -#define ANOMALY_05000381 (1) -/* New Feature: Boot from OTP Memory */ -#define ANOMALY_05000385 (1) -/* New Feature: bfrom_SysControl() Routine */ -#define ANOMALY_05000386 (1) -/* New Feature: Programmable Preboot Settings */ -#define ANOMALY_05000387 (1) +#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* 8-Bit NAND Flash Boot Mode Not Functional */ +#define ANOMALY_05000382 (__SILICON_REVISION__ < 2) +/* Host Must Not Read Back During Host DMA Boot */ +#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Boot from OTP Memory Not Functional */ +#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* bfrom_SysControl() Firmware Routine Not Functional */ +#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Programmable Preboot Settings Not Functional */ +#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* CRC32 Checksum Support Not Functional */ +#define ANOMALY_05000388 (__SILICON_REVISION__ < 2) /* Reset Vector Must Not Be in SDRAM Memory Space */ -#define ANOMALY_05000389 (1) -/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */ -#define ANOMALY_05000392 (1) -/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000393 (1) -/* New Feature: Log Buffer Functionality */ -#define ANOMALY_05000394 (1) -/* New Feature: Hook Routine Functionality */ -#define ANOMALY_05000395 (1) -/* New Feature: Header Indirect Bit */ -#define ANOMALY_05000396 (1) -/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */ -#define ANOMALY_05000397 (1) -/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */ -#define ANOMALY_05000398 (1) -/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */ -#define ANOMALY_05000399 (1) +#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Log Buffer Not Functional */ +#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Hook Routine Not Functional */ +#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Header Indirect Bit Not Functional */ +#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ +#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */ +#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */ +#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ -#define ANOMALY_05000401 (1) +#define ANOMALY_05000401 (__SILICON_REVISION__ < 2) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (__SILICON_REVISION__ < 2) +/* Lockbox SESR Disallows Certain User Interrupts */ +#define ANOMALY_05000404 (__SILICON_REVISION__ < 2) +/* Lockbox SESR Firmware Does Not Save/Restore Full Context */ +#define ANOMALY_05000405 (1) +/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */ +#define ANOMALY_05000407 (__SILICON_REVISION__ < 2) +/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */ +#define ANOMALY_05000408 (1) +/* Lockbox firmware leaves MDMA0 channel enabled */ +#define ANOMALY_05000409 (__SILICON_REVISION__ < 2) +/* Incorrect Default Internal Voltage Regulator Setting */ +#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */ +#define ANOMALY_05000411 (__SILICON_REVISION__ < 2) +/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */ +#define ANOMALY_05000414 (__SILICON_REVISION__ < 2) +/* DEB2_URGENT Bit Not Functional */ +#define ANOMALY_05000415 (__SILICON_REVISION__ < 2) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */ +#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */ +#define ANOMALY_05000418 (__SILICON_REVISION__ < 2) +/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */ +#define ANOMALY_05000420 (__SILICON_REVISION__ < 2) +/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */ +#define ANOMALY_05000421 (1) +/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */ +#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) +/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */ +#define ANOMALY_05000423 (__SILICON_REVISION__ < 2) +/* Internal Voltage Regulator Not Trimmed */ +#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +/* Multichannel SPORT Channel Misalignment Under Specific Configuration */ +#define ANOMALY_05000425 (__SILICON_REVISION__ < 2) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */ +#define ANOMALY_05000426 (1) +/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */ +#define ANOMALY_05000429 (__SILICON_REVISION__ < 2) +/* Software System Reset Corrupts PLL_LOCKCNT Register */ +#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) +/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */ +#define ANOMALY_05000432 (ANOMALY_BF526) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -97,6 +165,8 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000285 (0) +#define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h index 056eb4b9cd2..144f08d3f8e 100644 --- a/arch/blackfin/mach-bf527/include/mach/bf527.h +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -30,8 +30,6 @@ #ifndef __MACH_BF527_H__ #define __MACH_BF527_H__ -#define SUPPORTED_REVID 2 - #define OFFSET_(x) ((x) & 0x0000FFFF) /*some misc defines*/ @@ -112,16 +110,31 @@ #ifdef CONFIG_BF527 #define CPU "BF527" +#define CPUID 0x27e4 +#endif +#ifdef CONFIG_BF526 +#define CPU "BF526" +#define CPUID 0x27e4 #endif #ifdef CONFIG_BF525 #define CPU "BF525" +#define CPUID 0x27e4 +#endif +#ifdef CONFIG_BF524 +#define CPU "BF524" +#define CPUID 0x27e4 +#endif +#ifdef CONFIG_BF523 +#define CPU "BF523" +#define CPUID 0x27e4 #endif #ifdef CONFIG_BF522 #define CPU "BF522" +#define CPUID 0x27e4 #endif + #ifndef CPU -#define CPU "UNKNOWN" -#define CPUID 0x0 +#error Unknown CPU type - This kernel doesn't seem to be configured properly #endif #endif /* __MACH_BF527_H__ */ diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index 2526b6ed6fa..75722d6008b 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -78,6 +78,9 @@ # define CONFIG_UART1_RTS_PIN -1 # endif #endif + +#define BFIN_UART_TX_FIFO_SIZE 2 + /* * The pin configuration is different from schematic */ @@ -119,7 +122,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; @@ -164,8 +166,6 @@ struct bfin_serial_res bfin_serial_resource[] = { #endif }; -int nr_ports = ARRAY_SIZE(bfin_serial_resource); - #define DRIVER_NAME "bfin-uart" static void bfin_serial_hw_init(struct bfin_serial_port *uart) diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index 6ac2ed7026e..68b55d03fed 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -1840,6 +1840,33 @@ #define DPRESCALE 0xf /* Load Counter Register */ +/* CNT_COMMAND bit field options */ + +#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_CONFIG bit field options */ + +#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ +#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ +#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ +#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ +#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ + +#define BNDMODE_COMP 0x0000 /* boundary compare mode */ +#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ +#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ +#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ + /* Bit masks for OTP_CONTROL */ #define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h index ae4d205bfcf..7f6da2c386b 100644 --- a/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -67,6 +67,10 @@ #define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) #endif +#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3)) +#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3)) +#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3)) + #define P_HWAIT (P_DONTCARE) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) |