aboutsummaryrefslogtreecommitdiff
path: root/arch/cris
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris')
-rw-r--r--arch/cris/Kconfig.debug5
-rw-r--r--arch/cris/Makefile66
-rw-r--r--arch/cris/arch-v10/Kconfig31
-rw-r--r--arch/cris/arch-v10/boot/Makefile9
-rw-r--r--arch/cris/arch-v10/boot/compressed/Makefile43
-rw-r--r--arch/cris/arch-v10/boot/rescue/Makefile45
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig250
-rw-r--r--arch/cris/defconfig376
-rw-r--r--arch/cris/kernel/Makefile3
9 files changed, 515 insertions, 313 deletions
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
index f42918bf22a..cd72324935c 100644
--- a/arch/cris/Kconfig.debug
+++ b/arch/cris/Kconfig.debug
@@ -38,4 +38,9 @@ config FRAME_POINTER
If you don't debug the kernel, you can say N, but we may not be able
to solve problems without frame pointers.
+config DEBUG_NMI_OOPS
+ bool "NMI causes oops printout"
+ help
+ If the system locks up without any debug information you can say Y
+ here to make it possible to dump an OOPS with an external NMI.
endmenu
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 9d28fa8563c..90ca8730b12 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -1,4 +1,4 @@
-# $Id: Makefile,v 1.23 2004/10/19 13:07:34 starvik Exp $
+# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $
# cris/Makefile
#
# This file is included by the global makefile so that you can add your own
@@ -15,6 +15,7 @@
arch-y := v10
arch-$(CONFIG_ETRAX_ARCH_V10) := v10
+arch-$(CONFIG_ETRAX_ARCH_V32) := v32
# No config avaiable for make clean etc
ifneq ($(arch-y),)
@@ -46,6 +47,21 @@ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/
drivers-y += arch/$(ARCH)/$(SARCH)/drivers/
libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC)
+# cris source path
+SRC_ARCH = $(srctree)/arch/$(ARCH)
+# cris object files path
+OBJ_ARCH = $(objtree)/arch/$(ARCH)
+
+target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot
+target_boot_dir = $(OBJ_ARCH)/boot
+src_boot_dir = $(SRC_ARCH)/boot
+target_compressed_dir = $(OBJ_ARCH)/boot/compressed
+src_compressed_dir = $(SRC_ARCH)/boot/compressed
+target_rescue_dir = $(OBJ_ARCH)/boot/rescue
+src_rescue_dir = $(SRC_ARCH)/boot/rescue
+
+export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir
+
vmlinux.bin: vmlinux
$(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin
@@ -65,44 +81,52 @@ cramfs:
clinux: vmlinux.bin decompress.bin rescue.bin
-decompress.bin: FORCE
- @make -C arch/$(ARCH)/boot/compressed decompress.bin
+decompress.bin: $(target_boot_dir)
+ @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin
-rescue.bin: FORCE
- @make -C arch/$(ARCH)/boot/rescue rescue.bin
+$(target_rescue_dir)/rescue.bin: $(target_boot_dir)
+ @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin
-zImage: vmlinux.bin rescue.bin
+zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin
## zImage - Compressed kernel (gzip)
- @make -C arch/$(ARCH)/boot/ zImage
+ @$(MAKE) -f $(src_boot_dir)/Makefile zImage
+
+$(target_boot_dir): $(target_boot_arch_dir)
+ ln -sfn $< $@
+
+$(target_boot_arch_dir):
+ mkdir -p $@
compressed: zImage
archmrproper:
archclean:
- $(Q)$(MAKE) $(clean)=arch/$(ARCH)/boot
+ @if [ -d arch/$(ARCH)/boot ]; then \
+ $(MAKE) $(clean)=arch/$(ARCH)/boot ; \
+ fi
rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
rm -rf $(LD_SCRIPT).tmp
-prepare: arch/$(ARCH)/.links include/asm-$(ARCH)/.arch \
+prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch \
include/asm-$(ARCH)/$(SARCH)/offset.h
# Create some links to make all tools happy
-arch/$(ARCH)/.links:
- @rm -rf arch/$(ARCH)/drivers
- @ln -sfn $(SARCH)/drivers arch/$(ARCH)/drivers
- @rm -rf arch/$(ARCH)/boot
- @ln -sfn $(SARCH)/boot arch/$(ARCH)/boot
- @rm -rf arch/$(ARCH)/lib
- @ln -sfn $(SARCH)/lib arch/$(ARCH)/lib
- @ln -sfn $(SARCH) arch/$(ARCH)/arch
- @ln -sfn ../$(SARCH)/vmlinux.lds.S arch/$(ARCH)/kernel/vmlinux.lds.S
+$(SRC_ARCH)/.links:
+ @rm -rf $(SRC_ARCH)/drivers
+ @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers
+ @rm -rf $(SRC_ARCH)/boot
+ @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot
+ @rm -rf $(SRC_ARCH)/lib
+ @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
+ @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
+ @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
@touch $@
# Create link to sub arch includes
-include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
- @echo ' Making asm-$(ARCH)/arch -> asm-$(ARCH)/$(SARCH) symlink'
+$(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
+ @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink'
@rm -f include/asm-$(ARCH)/arch
- @ln -sf $(SARCH) include/asm-$(ARCH)/arch
+ @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch
@touch $@
arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 2ca64cc40c6..44eb1b9accb 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -260,6 +260,37 @@ config ETRAX_DEBUG_PORT_NULL
endchoice
choice
+ prompt "Kernel GDB port"
+ depends on ETRAX_KGDB
+ default ETRAX_KGDB_PORT0
+ help
+ Choose a serial port for kernel debugging. NOTE: This port should
+ not be enabled under Drivers for built-in interfaces (as it has its
+ own initialization code) and should not be the same as the debug port.
+
+config ETRAX_KGDB_PORT0
+ bool "Serial-0"
+ help
+ Use serial port 0 for kernel debugging.
+
+config ETRAX_KGDB_PORT1
+ bool "Serial-1"
+ help
+ Use serial port 1 for kernel debugging.
+
+config ETRAX_KGDB_PORT2
+ bool "Serial-2"
+ help
+ Use serial port 2 for kernel debugging.
+
+config ETRAX_KGDB_PORT3
+ bool "Serial-3"
+ help
+ Use serial port 3 for kernel debugging.
+
+endchoice
+
+choice
prompt "Product rescue-port"
depends on ETRAX_ARCH_V10
default ETRAX_RESCUE_SER0
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
index fe6650368e6..e5b10585110 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -1,12 +1,13 @@
#
# arch/cris/boot/Makefile
#
+target = $(target_boot_dir)
+src = $(src_boot_dir)
zImage: compressed/vmlinuz
-compressed/vmlinuz: $(TOPDIR)/vmlinux
- @$(MAKE) -C compressed vmlinuz
+compressed/vmlinuz:
+ @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz
clean:
- rm -f zImage tools/build compressed/vmlinux.out
- @$(MAKE) -C compressed clean
+ @$(MAKE) -f $(src)/compressed/Makefile clean
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 5f71c2c819e..6584a44820f 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -1,40 +1,45 @@
#
-# linux/arch/etrax100/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux files and romfs
+# create a compressed vmlinuz image from the binary vmlinux.bin file
#
+target = $(target_compressed_dir)
+src = $(src_compressed_dir)
-CC = gcc-cris -melf -I $(TOPDIR)/include
+CC = gcc-cris -melf $(LINUXINCLUDE)
CFLAGS = -O2
LD = ld-cris
OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss
-OBJECTS = head.o misc.o
+OBJECTS = $(target)/head.o $(target)/misc.o
# files to compress
-SYSTEM = $(TOPDIR)/vmlinux.bin
+SYSTEM = $(objtree)/vmlinux.bin
-all: vmlinuz
+all: $(target_compressed_dir)/vmlinuz
-decompress.bin: $(OBJECTS)
- $(LD) -T decompress.ld -o decompress.o $(OBJECTS)
- $(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin
-# save it for mkprod in the topdir.
- cp decompress.bin $(TOPDIR)
+$(target)/decompress.bin: $(OBJECTS)
+ $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
+ $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
+# Create vmlinuz image in top-level build directory
+$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
+ @echo " COMPR vmlinux.bin --> vmlinuz"
+ @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz
+ @rm -f piggy.img
-vmlinuz: piggy.img decompress.bin
- cat decompress.bin piggy.img > vmlinuz
- rm -f piggy.img
+$(target)/head.o: $(src)/head.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-head.o: head.S
- $(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o
+$(target)/misc.o: $(src)/misc.c
+ $(CC) -D__KERNEL__ -c $< -o $@
# gzip the kernel image
piggy.img: $(SYSTEM)
- cat $(SYSTEM) | gzip -f -9 > piggy.img
+ @cat $(SYSTEM) | gzip -f -9 > piggy.img
+
+$(target):
+ mkdir -p $(target)
clean:
- rm -f piggy.img vmlinuz vmlinuz.o
+ rm -f piggy.img $(objtree)/vmlinuz
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index e9f2ba2ad02..8be9b313031 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -1,52 +1,53 @@
#
# Makefile for rescue code
#
-ifndef TOPDIR
-TOPDIR = ../../../..
-endif
-CC = gcc-cris -mlinux -I $(TOPDIR)/include
+target = $(target_rescue_dir)
+src = $(src_rescue_dir)
+
+CC = gcc-cris -mlinux $(LINUXINCLUDE)
CFLAGS = -O2
LD = gcc-cris -mlinux -nostdlib
OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss
-all: rescue.bin testrescue.bin kimagerescue.bin
-
-rescue: rescue.bin
- # do nothing
+all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin
-rescue.bin: head.o
- $(LD) -T rescue.ld -o rescue.o head.o
- $(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin
- cp rescue.bin $(TOPDIR)
+$(target)/rescue.bin: $(target) $(target)/head.o
+ $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
+# Place a copy in top-level build directory
+ cp -p $(target)/rescue.bin $(objtree)
-testrescue.bin: testrescue.o
- $(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin
+$(target)/testrescue.bin: $(target) $(target)/testrescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin
# Pad it to 784 bytes
dd if=/dev/zero of=tmp2423 bs=1 count=784
cat tr.bin tmp2423 >testrescue_tmp.bin
- dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784
+ dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784
rm tr.bin tmp2423 testrescue_tmp.bin
-kimagerescue.bin: kimagerescue.o
- $(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin
+$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin
# Pad it to 784 bytes, that's what the rescue loader expects
dd if=/dev/zero of=tmp2423 bs=1 count=784
cat ktr.bin tmp2423 >kimagerescue_tmp.bin
- dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784
+ dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784
rm ktr.bin tmp2423 kimagerescue_tmp.bin
-head.o: head.S
+$(target):
+ mkdir -p $(target)
+
+$(target)/head.o: $(src)/head.S
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
-testrescue.o: testrescue.S
+$(target)/testrescue.o: $(src)/testrescue.S
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
-kimagerescue.o: kimagerescue.S
+$(target)/kimagerescue.o: $(src)/kimagerescue.S
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
clean:
- rm -f *.o *.bin
+ rm -f $(target)/*.o $(target)/*.bin
fastdep:
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 748374f25b8..8b50e840295 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -1,17 +1,11 @@
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
+ select NET_ETHERNET
help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
controller.
-# this is just so that the user does not have to go into the
-# normal ethernet driver section just to enable ethernetworking
-config NET_ETHERNET
- bool
- depends on ETRAX_ETHERNET
- default y
-
choice
prompt "Network LED behavior"
depends on ETRAX_ETHERNET
@@ -20,26 +14,26 @@ choice
config ETRAX_NETWORK_LED_ON_WHEN_LINK
bool "LED_on_when_link"
help
- Selecting LED_on_when_link will light the LED when there is a
- connection and will flash off when there is activity.
+ Selecting LED_on_when_link will light the LED when there is a
+ connection and will flash off when there is activity.
- Selecting LED_on_when_activity will light the LED only when
+ Selecting LED_on_when_activity will light the LED only when
there is activity.
- This setting will also affect the behaviour of other activity LEDs
- e.g. Bluetooth.
+ This setting will also affect the behaviour of other activity LEDs
+ e.g. Bluetooth.
config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
bool "LED_on_when_activity"
help
- Selecting LED_on_when_link will light the LED when there is a
- connection and will flash off when there is activity.
+ Selecting LED_on_when_link will light the LED when there is a
+ connection and will flash off when there is activity.
- Selecting LED_on_when_activity will light the LED only when
+ Selecting LED_on_when_activity will light the LED only when
there is activity.
- This setting will also affect the behaviour of other activity LEDs
- e.g. Bluetooth.
+ This setting will also affect the behaviour of other activity LEDs
+ e.g. Bluetooth.
endchoice
@@ -91,11 +85,11 @@ choice
depends on ETRAX_SERIAL_PORT0
default ETRAX_SERIAL_PORT0_DMA6_OUT
-config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT
- bool "No DMA out"
+config ETRAX_SERIAL_PORT0_NO_DMA_OUT
+ bool "No DMA out"
-config CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
- bool "DMA 6"
+config ETRAX_SERIAL_PORT0_DMA6_OUT
+ bool "DMA 6"
endchoice
@@ -104,11 +98,11 @@ choice
depends on ETRAX_SERIAL_PORT0
default ETRAX_SERIAL_PORT0_DMA7_IN
-config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN
- bool "No DMA in"
+config ETRAX_SERIAL_PORT0_NO_DMA_IN
+ bool "No DMA in"
-config CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
- bool "DMA 7"
+config ETRAX_SERIAL_PORT0_DMA7_IN
+ bool "DMA 7"
endchoice
@@ -205,11 +199,11 @@ choice
depends on ETRAX_SERIAL_PORT1
default ETRAX_SERIAL_PORT1_DMA8_OUT
-config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT
- bool "No DMA out"
+config ETRAX_SERIAL_PORT1_NO_DMA_OUT
+ bool "No DMA out"
-config CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
- bool "DMA 8"
+config ETRAX_SERIAL_PORT1_DMA8_OUT
+ bool "DMA 8"
endchoice
@@ -218,11 +212,11 @@ choice
depends on ETRAX_SERIAL_PORT1
default ETRAX_SERIAL_PORT1_DMA9_IN
-config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN
- bool "No DMA in"
+config ETRAX_SERIAL_PORT1_NO_DMA_IN
+ bool "No DMA in"
-config CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
- bool "DMA 9"
+config ETRAX_SERIAL_PORT1_DMA9_IN
+ bool "DMA 9"
endchoice
@@ -308,7 +302,7 @@ config ETRAX_SER1_CD_ON_PB_BIT
Specify the pin of the PB port to carry the CD signal for serial
port 1.
-comment "Make sure you dont have the same PB bits more than once!"
+comment "Make sure you do not have the same PB bits more than once!"
depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
config ETRAX_SERIAL_PORT2
@@ -322,11 +316,11 @@ choice
depends on ETRAX_SERIAL_PORT2
default ETRAX_SERIAL_PORT2_DMA2_OUT
-config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT
- bool "No DMA out"
+config ETRAX_SERIAL_PORT2_NO_DMA_OUT
+ bool "No DMA out"
-config CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
- bool "DMA 2"
+config ETRAX_SERIAL_PORT2_DMA2_OUT
+ bool "DMA 2"
endchoice
@@ -335,11 +329,11 @@ choice
depends on ETRAX_SERIAL_PORT2
default ETRAX_SERIAL_PORT2_DMA3_IN
-config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN
- bool "No DMA in"
+config ETRAX_SERIAL_PORT2_NO_DMA_IN
+ bool "No DMA in"
-config CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
- bool "DMA 3"
+config ETRAX_SERIAL_PORT2_DMA3_IN
+ bool "DMA 3"
endchoice
@@ -436,11 +430,11 @@ choice
depends on ETRAX_SERIAL_PORT3
default ETRAX_SERIAL_PORT3_DMA4_OUT
-config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT
- bool "No DMA out"
+config ETRAX_SERIAL_PORT3_NO_DMA_OUT
+ bool "No DMA out"
-config CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
- bool "DMA 4"
+config ETRAX_SERIAL_PORT3_DMA4_OUT
+ bool "DMA 4"
endchoice
@@ -449,11 +443,11 @@ choice
depends on ETRAX_SERIAL_PORT3
default ETRAX_SERIAL_PORT3_DMA5_IN
-config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN
- bool "No DMA in"
+config ETRAX_SERIAL_PORT3_NO_DMA_IN
+ bool "No DMA in"
-config CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
- bool "DMA 5"
+config ETRAX_SERIAL_PORT3_DMA5_IN
+ bool "DMA 5"
endchoice
@@ -554,7 +548,6 @@ config ETRAX_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
- select DMA_NONPCI
help
Enable this to get support for ATA/IDE.
You can't use paralell ports or SCSI ports
@@ -579,7 +572,7 @@ config ETRAX_IDE_PB7_RESET
IDE reset on pin 7 on port B
config ETRAX_IDE_G27_RESET
- bool "Port_G_Bit_27"
+ bool "Port_G_Bit_27"
help
IDE reset on pin 27 on port G
@@ -588,30 +581,36 @@ endchoice
config ETRAX_USB_HOST
bool "USB host"
+ select USB
help
This option enables the host functionality of the ETRAX 100LX
built-in USB controller. In host mode the controller is designed
for CTRL and BULK traffic only, INTR traffic may work as well
however (depending on the requirements of timeliness).
-config USB
- tristate
- depends on ETRAX_USB_HOST
- default y
-
config ETRAX_USB_HOST_PORT1
- bool " USB port 1 enabled"
- depends on ETRAX_USB_HOST
- default n
+ bool "USB port 1 enabled"
+ depends on ETRAX_USB_HOST
+ default n
config ETRAX_USB_HOST_PORT2
- bool " USB port 2 enabled"
- depends on ETRAX_USB_HOST
- default n
+ bool "USB port 2 enabled"
+ depends on ETRAX_USB_HOST
+ default n
config ETRAX_AXISFLASHMAP
bool "Axis flash-map support"
depends on ETRAX_ARCH_V10
+ select MTD
+ select MTD_CFI
+ select MTD_CFI_AMDSTD
+ select MTD_OBSOLETE_CHIPS
+ select MTD_AMDSTD
+ select MTD_CHAR
+ select MTD_BLOCK
+ select MTD_PARTITIONS
+ select MTD_CONCAT
+ select MTD_COMPLEX_MAPPINGS
help
This option enables MTD mapping of flash devices. Needed to use
flash memories. If unsure, say Y.
@@ -627,119 +626,6 @@ config ETRAX_PTABLE_SECTOR
for changing this is when the flash block size is bigger
than 64kB (e.g. when using two parallel 16 bit flashes).
-# here we define the CONFIG_'s necessary to enable MTD support
-# for the flash
-config MTD
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- Memory Technology Devices are flash, RAM and similar chips, often
- used for solid state file systems on embedded devices. This option
- will provide the generic support for MTD drivers to register
- themselves with the kernel and for potential users of MTD devices
- to enumerate the devices which are present and obtain a handle on
- them. It will also allow you to select individual drivers for
- particular hardware and users of MTD devices. If unsure, say N.
-
-config MTD_CFI
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- The Common Flash Interface specification was developed by Intel,
- AMD and other flash manufactures that provides a universal method
- for probing the capabilities of flash devices. If you wish to
- support any device that is CFI-compliant, you need to enable this
- option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
- for more information on CFI.
-
-config MTD_CFI_AMDSTD
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- The Common Flash Interface defines a number of different command
- sets which a CFI-compliant chip may claim to implement. This code
- provides support for one of those command sets, used on chips
- chips including the AMD Am29LV320.
-
-config MTD_OBSOLETE_CHIPS
- bool
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- This option does not enable any code directly, but will allow you to
- select some other chip drivers which are now considered obsolete,
- because the generic CONFIG_JEDEC_PROBE code above should now detect
- the chips which are supported by these drivers, and allow the generic
- CFI-compatible drivers to drive the chips. Say 'N' here unless you have
- already tried the CONFIG_JEDEC_PROBE method and reported its failure
- to the MTD mailing list at <linux-mtd@lists.infradead.org>
-
-config MTD_AMDSTD
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- This option enables support for flash chips using AMD-compatible
- commands, including some which are not CFI-compatible and hence
- cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
-
- It also works on AMD compatible chips that do conform to CFI.
-
-config MTD_CHAR
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- This provides a character device for each MTD device present in
- the system, allowing the user to read and write directly to the
- memory chips, and also use ioctl() to obtain information about
- the device, or to erase parts of it.
-
-config MTD_BLOCK
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- ---help---
- Although most flash chips have an erase size too large to be useful
- as block devices, it is possible to use MTD devices which are based
- on RAM chips in this manner. This block device is a user of MTD
- devices performing that function.
-
- At the moment, it is also required for the Journalling Flash File
- System(s) to obtain a handle on the MTD device when it's mounted
- (although JFFS and JFFS2 don't actually use any of the functionality
- of the mtdblock device).
-
- Later, it may be extended to perform read/erase/modify/write cycles
- on flash chips to emulate a smaller block size. Needless to say,
- this is very unsafe, but could be useful for file systems which are
- almost never written to.
-
- You do not need this option for use with the DiskOnChip devices. For
- those, enable NFTL support (CONFIG_NFTL) instead.
-
-config MTD_PARTITIONS
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
- help
- If you have a device which needs to divide its flash chip(s) up
- into multiple 'partitions', each of which appears to the user as
- a separate MTD device, you require this option to be enabled. If
- unsure, say 'Y'.
-
- Note, however, that you don't need this option for the DiskOnChip
- devices. Partitioning on NFTL 'devices' is a different - that's the
- 'normal' form of partitioning used on a block device.
-
-config MTD_CONCAT
- tristate
- depends on ETRAX_AXISFLASHMAP
- default y
-
config ETRAX_I2C
bool "I2C support"
depends on ETRAX_ARCH_V10
@@ -752,7 +638,7 @@ config ETRAX_I2C
val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
# this is true for most products since PB-I2C seems to be somewhat
-# flawed..
+# flawed..
config ETRAX_I2C_USES_PB_NOT_PB_I2C
bool "I2C uses PB not PB-I2C"
depends on ETRAX_I2C
@@ -886,7 +772,7 @@ config ETRAX_RTC
bool "Real Time Clock support"
depends on ETRAX_ARCH_V10
help
- Enables drivers for the Real-Time Clock battery-backed chips on
+ Enables drivers for the Real-Time Clock battery-backed chips on
some products. The kernel reads the time when booting, and
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
@@ -903,13 +789,13 @@ config ETRAX_DS1302
bool "DS1302"
help
Enables the driver for the DS1302 Real-Time Clock battery-backed
- chip on some products.
+ chip on some products.
config ETRAX_PCF8563
bool "PCF8563"
help
Enables the driver for the PCF8563 Real-Time Clock battery-backed
- chip on some products.
+ chip on some products.
endchoice
@@ -954,10 +840,8 @@ config ETRAX_DS1302_TRICKLE_CHARGE
help
This controls the initial value of the trickle charge register.
0 = disabled (use this if you are unsure or have a non rechargable battery)
- Otherwise the following values can be OR:ed together to control the
+ Otherwise the following values can be OR:ed together to control the
charge current:
1 = 2kohm, 2 = 4kohm, 3 = 4kohm
4 = 1 diode, 8 = 2 diodes
Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5
-
-
diff --git a/arch/cris/defconfig b/arch/cris/defconfig
index 32c9c987dba..142a10818af 100644
--- a/arch/cris/defconfig
+++ b/arch/cris/defconfig
@@ -1,22 +1,27 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11
+# Mon Jun 20 13:42:02 2005
#
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_CRIS=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
-CONFIG_SWAP=y
+CONFIG_LOCALVERSION=""
+# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -24,16 +29,19 @@ CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
@@ -45,23 +53,28 @@ CONFIG_IOSCHED_CFQ=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_SMP is not set
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
-CONFIG_ETRAX_WATCHDOG=y
-CONFIG_ETRAX_WATCHDOG_NICE_DOGGY=y
+# CONFIG_ETRAX_WATCHDOG is not set
CONFIG_ETRAX_FAST_TIMER=y
# CONFIG_PREEMPT is not set
+# CONFIG_OOM_REBOOT is not set
#
# Hardware setup
#
-CONFIG_ETRAX100LX=y
-# CONFIG_ETRAX100LX_V2 is not set
+# CONFIG_ETRAX100LX is not set
+CONFIG_ETRAX100LX_V2=y
# CONFIG_SVINTO_SIM is not set
+# CONFIG_ETRAXFS is not set
+# CONFIG_ETRAXFS_SIM is not set
CONFIG_ETRAX_ARCH_V10=y
-CONFIG_ETRAX_DRAM_SIZE=16
+# CONFIG_ETRAX_ARCH_V32 is not set
+CONFIG_ETRAX_DRAM_SIZE=32
CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_CRIS_LOW_MAP=y
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
+CONFIG_ETRAX_FLASH1_SIZE=4
+CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
CONFIG_ETRAX_PA_LEDS=y
# CONFIG_ETRAX_PB_LEDS is not set
# CONFIG_ETRAX_CSP0_LEDS is not set
@@ -81,13 +94,13 @@ CONFIG_ETRAX_RESCUE_SER0=y
# CONFIG_ETRAX_RESCUE_SER1 is not set
# CONFIG_ETRAX_RESCUE_SER2 is not set
# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x104
+CONFIG_ETRAX_DEF_R_WAITSTATES=0x95a6
+CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
CONFIG_ETRAX_SDRAM=y
-CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x00e03636
+CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09e05757
CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
+CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0x00
CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e
CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
@@ -97,16 +110,17 @@ CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
# Drivers for built-in interfaces
#
CONFIG_ETRAX_ETHERNET=y
-CONFIG_NET_ETHERNET=y
# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
CONFIG_ETRAX_SERIAL=y
-CONFIG_ETRAX_SERIAL_FAST_TIMER=y
+# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
+# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
+CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
CONFIG_ETRAX_SERIAL_PORT0=y
-# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set
-CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y
-# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set
-CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y
+# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set
+CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y
+# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set
+CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y
CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
@@ -121,10 +135,10 @@ CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
# CONFIG_ETRAX_SERIAL_PORT1 is not set
CONFIG_ETRAX_SERIAL_PORT2=y
-# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
-CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
-# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
-CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
+# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
+CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
+# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
+CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
@@ -138,44 +152,51 @@ CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
# CONFIG_ETRAX_SERIAL_PORT3 is not set
-# CONFIG_ETRAX_RS485 is not set
-# CONFIG_ETRAX_IDE is not set
-# CONFIG_IDE is not set
-# CONFIG_ETRAX_USB_HOST is not set
+CONFIG_ETRAX_RS485=y
+# CONFIG_ETRAX_RS485_ON_PA is not set
+# CONFIG_ETRAX_RS485_DISABLE_RECEIVER is not set
+CONFIG_ETRAX_IDE=y
+CONFIG_ETRAX_IDE_DELAY=15
+CONFIG_ETRAX_IDE_PB7_RESET=y
+# CONFIG_ETRAX_IDE_G27_RESET is not set
+CONFIG_ETRAX_USB_HOST=y
+CONFIG_ETRAX_USB_HOST_PORT1=y
+CONFIG_ETRAX_USB_HOST_PORT2=y
CONFIG_ETRAX_AXISFLASHMAP=y
CONFIG_ETRAX_PTABLE_SECTOR=65536
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_OBSOLETE_CHIPS=y
-CONFIG_MTD_AMDSTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CONCAT=y
# CONFIG_ETRAX_I2C is not set
-CONFIG_ETRAX_GPIO=y
-CONFIG_ETRAX_PA_BUTTON_BITMASK=0x02
-CONFIG_ETRAX_PA_CHANGEABLE_DIR=0x00
-CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PB_CHANGEABLE_DIR=0x00
-CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
-# CONFIG_ETRAX_RTC is not set
+# CONFIG_ETRAX_GPIO is not set
+CONFIG_ETRAX_RTC=y
+CONFIG_ETRAX_DS1302=y
+# CONFIG_ETRAX_PCF8563 is not set
+CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y
+CONFIG_ETRAX_DS1302_RSTBIT=0
+CONFIG_ETRAX_DS1302_SCLBIT=1
+CONFIG_ETRAX_DS1302_SDABIT=0
+CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0
#
# Generic Driver Options
#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
+CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CONCAT=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
#
# User Modules And Translation Layers
#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
@@ -183,14 +204,30 @@ CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
#
# RAM/ROM/Flash chip drivers
#
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+CONFIG_MTD_AMDSTD=y
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set
@@ -204,11 +241,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
CONFIG_MTDRAM_ABS_POS=0x0
# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
@@ -235,11 +274,25 @@ CONFIG_MTDRAM_ABS_POS=0x0
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# Multi-device support (RAID and LVM)
@@ -249,6 +302,28 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
# ATA/ATAPI/MFM/RLL support
#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -258,7 +333,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -288,6 +362,9 @@ CONFIG_INET=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
@@ -301,11 +378,10 @@ CONFIG_NETFILTER=y
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -323,12 +399,12 @@ CONFIG_NETFILTER=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -338,7 +414,26 @@ CONFIG_NETFILTER=y
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=y
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=y
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -348,6 +443,7 @@ CONFIG_NETDEVICES=y
#
# Ethernet (10 or 100Mbit)
#
+CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
#
@@ -389,11 +485,19 @@ CONFIG_NETDEVICES=y
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
#
# Userland interfaces
#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
@@ -404,10 +508,25 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Character devices
@@ -426,7 +545,6 @@ CONFIG_SERIO=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
@@ -441,13 +559,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -469,10 +584,15 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -485,7 +605,8 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -497,6 +618,7 @@ CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
@@ -512,7 +634,15 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS2_FS is not set
+# CONFIG_JFFS_PROC_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -530,14 +660,13 @@ CONFIG_NFS_V3=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
@@ -557,8 +686,120 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOUND is not set
#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
# USB support
#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
#
# USB Gadget Support
@@ -568,14 +809,17 @@ CONFIG_MSDOS_PARTITION=y
#
# Kernel hacking
#
-# CONFIG_PROFILE is not set
+# CONFIG_PROFILING is not set
+# CONFIG_SYSTEM_PROFILER is not set
# CONFIG_ETRAX_KGDB is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
+# CONFIG_DEBUG_NMI_OOPS is not set
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -584,8 +828,14 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_CRYPTO is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
-# CONFIG_CRC32 is not set
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile
index 1546a0e7404..c8e8ea57098 100644
--- a/arch/cris/kernel/Makefile
+++ b/arch/cris/kernel/Makefile
@@ -1,4 +1,4 @@
-# $Id: Makefile,v 1.10 2004/05/14 10:18:12 starvik Exp $
+# $Id: Makefile,v 1.12 2004/10/19 13:07:43 starvik Exp $
#
# Makefile for the linux kernel.
#
@@ -10,6 +10,7 @@ obj-y := process.o traps.o irq.o ptrace.o setup.o \
obj-$(CONFIG_MODULES) += crisksyms.o
obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_SYSTEM_PROFILER) += profile.o
clean:
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:48:10 +0000