aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/mach-voyager/voyager_basic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/mach-voyager/voyager_basic.c')
-rw-r--r--arch/i386/mach-voyager/voyager_basic.c331
1 files changed, 0 insertions, 331 deletions
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
deleted file mode 100644
index 9b77b39b71a..00000000000
--- a/arch/i386/mach-voyager/voyager_basic.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/kernel/voyager.c
- *
- * This file contains all the voyager specific routines for getting
- * initialisation of the architecture to function. For additional
- * features see:
- *
- * voyager_cat.c - Voyager CAT bus interface
- * voyager_smp.c - Voyager SMP hal (emulates linux smp.c)
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/sysrq.h>
-#include <linux/smp.h>
-#include <linux/nodemask.h>
-#include <asm/io.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <linux/pm.h>
-#include <asm/tlbflush.h>
-#include <asm/arch_hooks.h>
-#include <asm/i8253.h>
-
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-int voyager_level = 0;
-
-struct voyager_SUS *voyager_SUS = NULL;
-
-#ifdef CONFIG_SMP
-static void
-voyager_dump(int dummy1, struct tty_struct *dummy3)
-{
- /* get here via a sysrq */
- voyager_smp_dump();
-}
-
-static struct sysrq_key_op sysrq_voyager_dump_op = {
- .handler = voyager_dump,
- .help_msg = "Voyager",
- .action_msg = "Dump Voyager Status",
-};
-#endif
-
-void
-voyager_detect(struct voyager_bios_info *bios)
-{
- if(bios->len != 0xff) {
- int class = (bios->class_1 << 8)
- | (bios->class_2 & 0xff);
-
- printk("Voyager System detected.\n"
- " Class %x, Revision %d.%d\n",
- class, bios->major, bios->minor);
- if(class == VOYAGER_LEVEL4)
- voyager_level = 4;
- else if(class < VOYAGER_LEVEL5_AND_ABOVE)
- voyager_level = 3;
- else
- voyager_level = 5;
- printk(" Architecture Level %d\n", voyager_level);
- if(voyager_level < 4)
- printk("\n**WARNING**: Voyager HAL only supports Levels 4 and 5 Architectures at the moment\n\n");
- /* install the power off handler */
- pm_power_off = voyager_power_off;
-#ifdef CONFIG_SMP
- register_sysrq_key('v', &sysrq_voyager_dump_op);
-#endif
- } else {
- printk("\n\n**WARNING**: No Voyager Subsystem Found\n");
- }
-}
-
-void
-voyager_system_interrupt(int cpl, void *dev_id)
-{
- printk("Voyager: detected system interrupt\n");
-}
-
-/* Routine to read information from the extended CMOS area */
-__u8
-voyager_extended_cmos_read(__u16 addr)
-{
- outb(addr & 0xff, 0x74);
- outb((addr >> 8) & 0xff, 0x75);
- return inb(0x76);
-}
-
-/* internal definitions for the SUS Click Map of memory */
-
-#define CLICK_ENTRIES 16
-#define CLICK_SIZE 4096 /* click to byte conversion for Length */
-
-typedef struct ClickMap {
- struct Entry {
- __u32 Address;
- __u32 Length;
- } Entry[CLICK_ENTRIES];
-} ClickMap_t;
-
-
-/* This routine is pretty much an awful hack to read the bios clickmap by
- * mapping it into page 0. There are usually three regions in the map:
- * Base Memory
- * Extended Memory
- * zero length marker for end of map
- *
- * Returns are 0 for failure and 1 for success on extracting region.
- */
-int __init
-voyager_memory_detect(int region, __u32 *start, __u32 *length)
-{
- int i;
- int retval = 0;
- __u8 cmos[4];
- ClickMap_t *map;
- unsigned long map_addr;
- unsigned long old;
-
- if(region >= CLICK_ENTRIES) {
- printk("Voyager: Illegal ClickMap region %d\n", region);
- return 0;
- }
-
- for(i = 0; i < sizeof(cmos); i++)
- cmos[i] = voyager_extended_cmos_read(VOYAGER_MEMORY_CLICKMAP + i);
-
- map_addr = *(unsigned long *)cmos;
-
- /* steal page 0 for this */
- old = pg0[0];
- pg0[0] = ((map_addr & PAGE_MASK) | _PAGE_RW | _PAGE_PRESENT);
- local_flush_tlb();
- /* now clear everything out but page 0 */
- map = (ClickMap_t *)(map_addr & (~PAGE_MASK));
-
- /* zero length is the end of the clickmap */
- if(map->Entry[region].Length != 0) {
- *length = map->Entry[region].Length * CLICK_SIZE;
- *start = map->Entry[region].Address;
- retval = 1;
- }
-
- /* replace the mapping */
- pg0[0] = old;
- local_flush_tlb();
- return retval;
-}
-
-/* voyager specific handling code for timer interrupts. Used to hand
- * off the timer tick to the SMP code, since the VIC doesn't have an
- * internal timer (The QIC does, but that's another story). */
-void
-voyager_timer_interrupt(void)
-{
- if((jiffies & 0x3ff) == 0) {
-
- /* There seems to be something flaky in either
- * hardware or software that is resetting the timer 0
- * count to something much higher than it should be
- * This seems to occur in the boot sequence, just
- * before root is mounted. Therefore, every 10
- * seconds or so, we sanity check the timer zero count
- * and kick it back to where it should be.
- *
- * FIXME: This is the most awful hack yet seen. I
- * should work out exactly what is interfering with
- * the timer count settings early in the boot sequence
- * and swiftly introduce it to something sharp and
- * pointy. */
- __u16 val;
-
- spin_lock(&i8253_lock);
-
- outb_p(0x00, 0x43);
- val = inb_p(0x40);
- val |= inb(0x40) << 8;
- spin_unlock(&i8253_lock);
-
- if(val > LATCH) {
- printk("\nVOYAGER: countdown timer value too high (%d), resetting\n\n", val);
- spin_lock(&i8253_lock);
- outb(0x34,0x43);
- outb_p(LATCH & 0xff , 0x40); /* LSB */
- outb(LATCH >> 8 , 0x40); /* MSB */
- spin_unlock(&i8253_lock);
- }
- }
-#ifdef CONFIG_SMP
- smp_vic_timer_interrupt();
-#endif
-}
-
-void
-voyager_power_off(void)
-{
- printk("VOYAGER Power Off\n");
-
- if(voyager_level == 5) {
- voyager_cat_power_off();
- } else if(voyager_level == 4) {
- /* This doesn't apparently work on most L4 machines,
- * but the specs say to do this to get automatic power
- * off. Unfortunately, if it doesn't power off the
- * machine, it ends up doing a cold restart, which
- * isn't really intended, so comment out the code */
-#if 0
- int port;
-
-
- /* enable the voyager Configuration Space */
- outb((inb(VOYAGER_MC_SETUP) & 0xf0) | 0x8,
- VOYAGER_MC_SETUP);
- /* the port for the power off flag is an offset from the
- floating base */
- port = (inb(VOYAGER_SSPB_RELOCATION_PORT) << 8) + 0x21;
- /* set the power off flag */
- outb(inb(port) | 0x1, port);
-#endif
- }
- /* and wait for it to happen */
- local_irq_disable();
- for(;;)
- halt();
-}
-
-/* copied from process.c */
-static inline void
-kb_wait(void)
-{
- int i;
-
- for (i=0; i<0x10000; i++)
- if ((inb_p(0x64) & 0x02) == 0)
- break;
-}
-
-void
-machine_shutdown(void)
-{
- /* Architecture specific shutdown needed before a kexec */
-}
-
-void
-machine_restart(char *cmd)
-{
- printk("Voyager Warm Restart\n");
- kb_wait();
-
- if(voyager_level == 5) {
- /* write magic values to the RTC to inform system that
- * shutdown is beginning */
- outb(0x8f, 0x70);
- outb(0x5 , 0x71);
-
- udelay(50);
- outb(0xfe,0x64); /* pull reset low */
- } else if(voyager_level == 4) {
- __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8;
- __u8 basebd = inb(VOYAGER_MC_SETUP);
-
- outb(basebd | 0x08, VOYAGER_MC_SETUP);
- outb(0x02, catbase + 0x21);
- }
- local_irq_disable();
- for(;;)
- halt();
-}
-
-void
-machine_emergency_restart(void)
-{
- /*for now, just hook this to a warm restart */
- machine_restart(NULL);
-}
-
-void
-mca_nmi_hook(void)
-{
- __u8 dumpval __maybe_unused = inb(0xf823);
- __u8 swnmi __maybe_unused = inb(0xf813);
-
- /* FIXME: assume dump switch pressed */
- /* check to see if the dump switch was pressed */
- VDEBUG(("VOYAGER: dumpval = 0x%x, swnmi = 0x%x\n", dumpval, swnmi));
- /* clear swnmi */
- outb(0xff, 0xf813);
- /* tell SUS to ignore dump */
- if(voyager_level == 5 && voyager_SUS != NULL) {
- if(voyager_SUS->SUS_mbox == VOYAGER_DUMP_BUTTON_NMI) {
- voyager_SUS->kernel_mbox = VOYAGER_NO_COMMAND;
- voyager_SUS->kernel_flags |= VOYAGER_OS_IN_PROGRESS;
- udelay(1000);
- voyager_SUS->kernel_mbox = VOYAGER_IGNORE_DUMP;
- voyager_SUS->kernel_flags &= ~VOYAGER_OS_IN_PROGRESS;
- }
- }
- printk(KERN_ERR "VOYAGER: Dump switch pressed, printing CPU%d tracebacks\n", smp_processor_id());
- show_stack(NULL, NULL);
- show_state();
-}
-
-
-
-void
-machine_halt(void)
-{
- /* treat a halt like a power off */
- machine_power_off();
-}
-
-void machine_power_off(void)
-{
- if (pm_power_off)
- pm_power_off();
-}