1 files changed, 86 insertions, 0 deletions
diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c
new file mode 100644
index 00000000000..998e04f6d68
--- /dev/null
+++ b/arch/i386/pci/mmconfig-shared.c
@@ -0,0 +1,86 @@
+/*
+ * mmconfig-shared.c - Low-level direct PCI config space access via
+ *                     MMCONFIG - common code between i386 and x86-64.
+ *
+ * This code does:
+ * - ACPI decoding and validation
+ *
+ * Per-architecture code takes care of the mappings and accesses
+ * themselves.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <asm/e820.h>
+
+#include "pci.h"
+
+/* aperture is up to 256MB but BIOS may reserve less */
+#define MMCONFIG_APER_MIN	(2 * 1024*1024)
+#define MMCONFIG_APER_MAX	(256 * 1024*1024)
+
+/* Verify the first 16 busses. We assume that systems with more busses
+   get MCFG right. */
+#define PCI_MMCFG_MAX_CHECK_BUS 16
+
+DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
+
+/* K8 systems have some devices (typically in the builtin northbridge)
+   that are only accessible using type1
+   Normally this can be expressed in the MCFG by not listing them
+   and assigning suitable _SEGs, but this isn't implemented in some BIOS.
+   Instead try to discover all devices on bus 0 that are unreachable using MM
+   and fallback for them. */
+static __init void unreachable_devices(void)
+{
+	int i, k;
+	/* Use the max bus number from ACPI here? */
+	for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) {
+		for (i = 0; i < 32; i++) {
+			u32 val1, val2;
+
+			pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
+			if (val1 == 0xffffffff)
+				continue;
+
+			raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2);
+			if (val1 != val2) {
+				set_bit(i + 32*k, pci_mmcfg_fallback_slots);
+				printk(KERN_NOTICE "PCI: No mmconfig possible"
+				       " on device %02x:%02x\n", k, i);
+			}
+		}
+	}
+}
+
+void __init pci_mmcfg_init(int type)
+{
+	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+		return;
+
+	acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].address == 0))
+		return;
+
+	/* Only do this check when type 1 works. If it doesn't work
+           assume we run on a Mac and always use MCFG */
+	if (type == 1 &&
+	    !e820_all_mapped(pci_mmcfg_config[0].address,
+			     pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
+			     E820_RESERVED)) {
+		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n",
+				pci_mmcfg_config[0].address);
+		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+		return;
+	}
+
+	if (pci_mmcfg_arch_init()) {
+		unreachable_devices();
+		pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
+	}
+}