diff options
Diffstat (limited to 'arch/i386')
| -rw-r--r-- | arch/i386/Kconfig | 24 | ||||
| -rw-r--r-- | arch/i386/boot/video.S | 19 | ||||
| -rw-r--r-- | arch/i386/kernel/Makefile | 4 | ||||
| -rw-r--r-- | arch/i386/kernel/hpet.c | 67 | ||||
| -rw-r--r-- | arch/i386/kernel/i8253.c | 118 | ||||
| -rw-r--r-- | arch/i386/kernel/kprobes.c | 95 | ||||
| -rw-r--r-- | arch/i386/kernel/numaq.c | 10 | ||||
| -rw-r--r-- | arch/i386/kernel/setup.c | 1 | ||||
| -rw-r--r-- | arch/i386/kernel/time.c | 157 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/Makefile | 9 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/common.c | 172 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer.c | 75 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer_cyclone.c | 259 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer_hpet.c | 217 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer_none.c | 39 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer_pit.c | 177 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer_pm.c | 342 | ||||
| -rw-r--r-- | arch/i386/kernel/timers/timer_tsc.c | 617 | ||||
| -rw-r--r-- | arch/i386/kernel/tsc.c | 478 | ||||
| -rw-r--r-- | arch/i386/lib/delay.c | 65 | ||||
| -rw-r--r-- | arch/i386/mm/fault.c | 38 | ||||
| -rw-r--r-- | arch/i386/oprofile/nmi_int.c | 4 | ||||
| -rw-r--r-- | arch/i386/pci/pcbios.c | 6 |
23 files changed, 893 insertions, 2100 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 1596101cfaf..374fb50608a 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -14,6 +14,10 @@ config X86_32 486, 586, Pentiums, and various instruction-set-compatible chips by AMD, Cyrix, and others. +config GENERIC_TIME + bool + default y + config SEMAPHORE_SLEEPERS bool default y @@ -1046,13 +1050,23 @@ config SCx200 tristate "NatSemi SCx200 support" depends on !X86_VOYAGER help - This provides basic support for the National Semiconductor SCx200 - processor. Right now this is just a driver for the GPIO pins. + This provides basic support for National Semiconductor's + (now AMD's) Geode processors. The driver probes for the + PCI-IDs of several on-chip devices, so its a good dependency + for other scx200_* drivers. - If you don't know what to do here, say N. + If compiled as a module, the driver is named scx200. - This support is also available as a module. If compiled as a - module, it will be called scx200. +config SCx200HR_TIMER + tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" + depends on SCx200 && GENERIC_TIME + default y + help + This driver provides a clocksource built upon the on-chip + 27MHz high-resolution timer. Its also a workaround for + NSC Geode SC-1100's buggy TSC, which loses time when the + processor goes idle (as is done by the scheduler). The + other workaround is idle=poll boot option. source "drivers/pcmcia/Kconfig" diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S index c9343c3a808..8c2a6faeeae 100644 --- a/arch/i386/boot/video.S +++ b/arch/i386/boot/video.S @@ -1929,7 +1929,7 @@ skip10: movb %ah, %al ret store_edid: -#ifdef CONFIG_FB_FIRMWARE_EDID +#ifdef CONFIG_FIRMWARE_EDID pushw %es # just save all registers pushw %ax pushw %bx @@ -1947,6 +1947,22 @@ store_edid: rep stosl + pushw %es # save ES + xorw %di, %di # Report Capability + pushw %di + popw %es # ES:DI must be 0:0 + movw $0x4f15, %ax + xorw %bx, %bx + xorw %cx, %cx + int $0x10 + popw %es # restore ES + + cmpb $0x00, %ah # call successful + jne no_edid + + cmpb $0x4f, %al # function supported + jne no_edid + movw $0x4f15, %ax # do VBE/DDC movw $0x01, %bx movw $0x00, %cx @@ -1954,6 +1970,7 @@ store_edid: movw $0x140, %di int $0x10 +no_edid: popw %di # restore all registers popw %dx popw %cx diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 96fb8a020af..0fac85df64f 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,10 +7,9 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o bootflag.o \ - quirks.o i8237.o topology.o alternative.o + quirks.o i8237.o topology.o alternative.o i8253.o tsc.o obj-y += cpu/ -obj-y += timers/ obj-y += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o @@ -37,6 +36,7 @@ obj-$(CONFIG_EFI) += efi.o efi_stub.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o obj-$(CONFIG_VM86) += vm86.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_HPET_TIMER) += hpet.o EXTRA_AFLAGS := -traditional diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c new file mode 100644 index 00000000000..c6737c35815 --- /dev/null +++ b/arch/i386/kernel/hpet.c @@ -0,0 +1,67 @@ +#include <linux/clocksource.h> +#include <linux/errno.h> +#include <linux/hpet.h> +#include <linux/init.h> + +#include <asm/hpet.h> +#include <asm/io.h> + +#define HPET_MASK CLOCKSOURCE_MASK(32) +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +static void *hpet_ptr; + +static cycle_t read_hpet(void) +{ + return (cycle_t)readl(hpet_ptr); +} + +static struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = HPET_MASK, + .mult = 0, /* set below */ + .shift = HPET_SHIFT, + .is_continuous = 1, +}; + +static int __init init_hpet_clocksource(void) +{ + unsigned long hpet_period; + void __iomem* hpet_base; + u64 tmp; + + if (!hpet_address) + return -ENODEV; + + /* calculate the hpet address: */ + hpet_base = + (void __iomem*)ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + hpet_ptr = hpet_base + HPET_COUNTER; + + /* calculate the frequency: */ + hpet_period = readl(hpet_base + HPET_PERIOD); + + /* + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + + return clocksource_register(&clocksource_hpet); +} + +module_init(init_hpet_clocksource); diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c new file mode 100644 index 00000000000..477b24daff5 --- /dev/null +++ b/arch/i386/kernel/i8253.c @@ -0,0 +1,118 @@ +/* + * i8253.c 8253/PIT functions + * + */ +#include <linux/clocksource.h> +#include <linux/spinlock.h> +#include <linux/jiffies.h> +#include <linux/sysdev.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/smp.h> +#include <asm/delay.h> +#include <asm/i8253.h> +#include <asm/io.h> + +#include "io_ports.h" + +DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); + +void setup_pit_timer(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ + udelay(10); + outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ + udelay(10); + outb(LATCH >> 8 , PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); +} + +/* + * Since the PIT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t pit_read(void) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&i8253_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + outb_p(0x00, PIT_MODE); /* latch the count ASAP */ + count = inb_p(PIT_CH0); /* read the latched count */ + count |= inb_p(PIT_CH0) << 8; + + /* VIA686a test code... reset the latch if count > max + 1 */ + if (count > LATCH) { + outb_p(0x34, PIT_MODE); + outb_p(LATCH & 0xff, PIT_CH0); + outb(LATCH >> 8, PIT_CH0); + count = LATCH - 1; + } + + /* + * It's possible for count to appear to go the wrong way for a + * couple of reasons: + * + * 1. The timer counter underflows, but we haven't handled the + * resulting interrupt and incremented jiffies yet. + * 2. Hardware problem with the timer, not giving us continuous time, + * the counter does small "jumps" upwards on some Pentium systems, + * (see c't 95/10 page 335 for Neptun bug.) + * + * Previous attempts to handle these cases intelligently were + * buggy, so we just do the simple thing now. + */ + if (count > old_count && jifs == old_jifs) { + count = old_count; + } + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&i8253_lock, flags); + + count = (LATCH - 1) - count; + + return (cycle_t)(jifs * LATCH) + count; +} + +static struct clocksource clocksource_pit = { + .name = "pit", + .rating = 110, + .read = pit_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 20, +}; + +static int __init init_pit_clocksource(void) +{ + if (num_possible_cpus() > 4) /* PIT does not scale! */ + return 0; + + clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); + return clocksource_register(&clocksource_pit); +} +module_init(init_pit_clocksource); diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 395a9a6dff8..727e419ad78 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -57,34 +57,85 @@ static __always_inline void set_jmp_op(void *from, void *to) /* * returns non-zero if opcodes can be boosted. */ -static __always_inline int can_boost(kprobe_opcode_t opcode) +static __always_inline int can_boost(kprobe_opcode_t *opcodes) { - switch (opcode & 0xf0 ) { +#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ + (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ + (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \ + (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \ + (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \ + << (row % 32)) + /* + * Undefined/reserved opcodes, conditional jump, Opcode Extension + * Groups, and some special opcodes can not be boost. + */ + static const unsigned long twobyte_is_boostable[256 / 32] = { + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + /* ------------------------------- */ + W(0x00, 0,0,1,1,0,0,1,0,1,1,0,0,0,0,0,0)| /* 00 */ + W(0x10, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 10 */ + W(0x20, 1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0)| /* 20 */ + W(0x30, 0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 30 */ + W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 40 */ + W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 50 */ + W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,0,0,1,1)| /* 60 */ + W(0x70, 0,0,0,0,1,1,1,1,0,0,0,0,0,0,1,1), /* 70 */ + W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 80 */ + W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1), /* 90 */ + W(0xa0, 1,1,0,1,1,1,0,0,1,1,0,1,1,1,0,1)| /* a0 */ + W(0xb0, 1,1,1,1,1,1,1,1,0,0,0,1,1,1,1,1), /* b0 */ + W(0xc0, 1,1,0,0,0,0,0,0,1,1,1,1,1,1,1,1)| /* c0 */ + W(0xd0, 0,1,1,1,0,1,0,0,1,1,0,1,1,1,0,1), /* d0 */ + W(0xe0, 0,1,1,0,0,1,0,0,1,1,0,1,1,1,0,1)| /* e0 */ + W(0xf0, 0,1,1,1,0,1,0,0,1,1,1,0,1,1,1,0) /* f0 */ + /* ------------------------------- */ + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + }; +#undef W + kprobe_opcode_t opcode; + kprobe_opcode_t *orig_opcodes = opcodes; +retry: + if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) + return 0; + opcode = *(opcodes++); + + /* 2nd-byte opcode */ + if (opcode == 0x0f) { + if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) + return 0; + return test_bit(*opcodes, twobyte_is_boostable); + } + + switch (opcode & 0xf0) { + case 0x60: + if (0x63 < opcode && opcode < 0x67) + goto retry; /* prefixes */ + /* can't boost Address-size override and bound */ + return (opcode != 0x62 && opcode != 0x67); case 0x70: return 0; /* can't boost conditional jump */ - case 0x90: - /* can't boost call and pushf */ - return opcode != 0x9a && opcode != 0x9c; case 0xc0: - /* can't boost undefined opcodes and soft-interruptions */ - return (0xc1 < opcode && opcode < 0xc6) || - (0xc7 < opcode && opcode < 0xcc) || opcode == 0xcf; + /* can't boost software-interruptions */ + return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf; case 0xd0: /* can boost AA* and XLAT */ return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7); case 0xe0: - /* can boost in/out and (may be) jmps */ - return (0xe3 < opcode && opcode != 0xe8); + /* can boost in/out and absolute jmps */ + return ((opcode & 0x04) || opcode == 0xea); case 0xf0: + if ((opcode & 0x0c) == 0 && opcode != 0xf1) + goto retry; /* lock/rep(ne) prefix */ /* clear and set flags can be boost */ return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe)); default: - /* currently, can't boost 2 bytes opcodes */ - return opcode != 0x0f; + if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e) + goto retry; /* prefixes */ + /* can't boost CS override and call */ + return (opcode != 0x2e && opcode != 0x9a); } } - /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -109,7 +160,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; - if (can_boost(p->opcode)) { + if (can_boost(p->addr)) { p->ainsn.boostable = 0; } else { p->ainsn.boostable = -1; @@ -208,7 +259,9 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe_ctlblk *kcb; #ifdef CONFIG_PREEMPT unsigned pre_preempt_count = preempt_count(); -#endif /* CONFIG_PREEMPT */ +#else + unsigned pre_preempt_count = 1; +#endif addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); @@ -285,22 +338,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) /* handler has already set things up, so skip ss setup */ return 1; - if (p->ainsn.boostable == 1 && -#ifdef CONFIG_PREEMPT - !(pre_preempt_count) && /* - * This enables booster when the direct - * execution path aren't preempted. - */ -#endif /* CONFIG_PREEMPT */ - !p->post_handler && !p->break_handler ) { +ss_probe: + if (pre_preempt_count && p->ainsn.boostable == 1 && !p->post_handler){ /* Boost up -- we can execute copied instructions directly */ reset_current_kprobe(); regs->eip = (unsigned long)p->ainsn.insn; preempt_enable_no_resched(); return 1; } - -ss_probe: prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; return 1; diff --git a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c index 5f5b075f860..0caf14652ba 100644 --- a/arch/i386/kernel/numaq.c +++ b/arch/i386/kernel/numaq.c @@ -79,10 +79,12 @@ int __init get_memcfg_numaq(void) return 1; } -static int __init numaq_dsc_disable(void) +static int __init numaq_tsc_disable(void) { - printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); - tsc_disable = 1; + if (num_online_nodes() > 1) { + printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); + tsc_disable = 1; + } return 0; } -core_initcall(numaq_dsc_disable); +arch_initcall(numaq_tsc_disable); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 6bef9273733..4a65040cc62 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1575,6 +1575,7 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + tsc_init(); } static __init int add_pcspkr(void) diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 9d307475985..5f43d041012 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -82,13 +82,6 @@ extern unsigned long wall_jiffies; DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -#include <asm/i8253.h> - -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); - -struct timer_opts *cur_timer __read_mostly = &timer_none; - /* * This is a special lock that is owned by the CPU and holds the index * register we are working with. It is required for NMI access to the @@ -118,99 +111,19 @@ void rtc_cmos_write(unsigned char val, unsigned char addr) } EXPORT_SYMBOL(rtc_cmos_write); -/* - * This version of gettimeofday has microsecond resolution - * and better than microsecond precision on fast x86 machines with TSC. - */ -void do_gettimeofday(struct timeval *tv) -{ - unsigned long seq; - unsigned long usec, sec; - unsigned long max_ntp_tick; - - do { - unsigned long lost; - - seq = read_seqbegin(&xtime_lock); - - usec = cur_timer->get_offset(); - lost = jiffies - wall_jiffies; - - /* - * If time_adjust is negative then NTP is slowing the clock - * so make sure not to go into next possible interval. - * Better to lose some accuracy than have time go backwards.. - */ - if (unlikely(time_adjust < 0)) { - max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj; - usec = min(usec, max_ntp_tick); - - if (lost) - usec += lost * max_ntp_tick; - } - else if (unlikely(lost)) - usec += lost * (USEC_PER_SEC / HZ); - - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / 1000); - } while (read_seqretry(&xtime_lock, seq)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - nsec -= cur_timer->get_offset() * NSEC_PER_USEC; - nsec -= (jiffies - wall_jiffies) * TICK_NSEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); - static int set_rtc_mmss(unsigned long nowtime) { int retval; - - WARN_ON(irqs_disabled()); + unsigned long flags; /* gets recalled with irq locally disabled */ - spin_lock_irq(&rtc_lock); + /* XXX - does irqsave resolve this? -johnstul */ + spin_lock_irqsave(&rtc_lock, flags); if (efi_enabled) retval = efi_set_rtc_mmss(nowtime); else retval = mach_set_rtc_mmss(nowtime); - spin_unlock_irq(&rtc_lock); + spin_unlock_irqrestore(&rtc_lock, flags); return retval; } @@ -218,16 +131,6 @@ static int set_rtc_mmss(unsigned long nowtime) int timer_ack; -/* monotonic_clock(): returns # of nanoseconds passed since time_init() - * Note: This function is required to return accurate - * time even in the absence of multiple timer ticks. - */ -unsigned long long monotonic_clock(void) -{ - return cur_timer->monotonic_clock(); -} -EXPORT_SYMBOL(monotonic_clock); - #if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER) unsigned long profile_pc(struct pt_regs *regs) { @@ -242,11 +145,21 @@ EXPORT_SYMBOL(profile_pc); #endif /* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * This is the same as the above, except we _also_ save the current + * Time Stamp Counter value at the time of the timer interrupt, so that + * we later on can estimate the time of day more exactly. */ -static inline void do_timer_interrupt(int irq, struct pt_regs *regs) +irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + #ifdef CONFIG_X86_IO_APIC if (timer_ack) { /* @@ -279,27 +192,6 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs) irq = inb_p( 0x61 ); /* read the current state */ outb_p( irq|0x80, 0x61 ); /* reset the IRQ */ } -} - -/* - * This is the same as the above, except we _also_ save the current - * Time Stamp Counter value at the time of the timer interrupt, so that - * we later on can estimate the time of day more exactly. - */ -irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - - cur_timer->mark_offset(); - - do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); @@ -380,7 +272,6 @@ void notify_arch_cmos_timer(void) static long clock_cmos_diff, sleep_start; -static struct timer_opts *last_timer; static int timer_suspend(struct sys_device *dev, pm_message_t state) { /* @@ -389,10 +280,6 @@ static int timer_suspend(struct sys_device *dev, pm_message_t state) clock_cmos_diff = -get_cmos_time(); clock_cmos_diff += get_seconds(); sleep_start = get_cmos_time(); - last_timer = cur_timer; - cur_timer = &timer_none; - if (last_timer->suspend) - last_timer->suspend(state); return 0; } @@ -415,10 +302,6 @@ static int timer_resume(struct sys_device *dev) jiffies_64 += sleep_length; wall_jiffies += sleep_length; write_sequnlock_irqrestore(&xtime_lock, flags); - if (last_timer->resume) - last_timer->resume(); - cur_timer = last_timer; - last_timer = NULL; touch_softlockup_watchdog(); return 0; } @@ -460,9 +343,6 @@ static void __init hpet_time_init(void) printk("Using HPET for base-timer\n"); } - cur_timer = select_timer(); - printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); - time_init_hook(); } #endif @@ -484,8 +364,5 @@ void __init time_init(void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - cur_timer = select_timer(); - printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); - time_init_hook(); } diff --git a/arch/i386/kernel/timers/Makefile b/arch/i386/kernel/timers/Makefile deleted file mode 100644 index 8fa12be658d..00000000000 --- a/arch/i386/kernel/timers/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for x86 timers -# - -obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o common.o - -obj-$(CONFIG_X86_CYCLONE_TIMER) += timer_cyclone.o -obj-$(CONFIG_HPET_TIMER) += timer_hpet.o -obj-$(CONFIG_X86_PM_TIMER) += timer_pm.o diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c deleted file mode 100644 index 8163fe0cf1f..00000000000 --- a/arch/i386/kernel/timers/common.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Common functions used across the timers go here - */ - -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/jiffies.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <asm/timer.h> -#include <asm/hpet.h> - -#include "mach_timer.h" - -/* ------ Calibrate the TSC ------- - * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). - * Too much 64-bit arithmetic here to do this cleanly in C, and for - * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) - * output busy loop as low as possible. We avoid reading the CTC registers - * directly because of the awkward 8-bit access mechanism of the 82C54 - * device. - */ - -#define CALIBRATE_TIME (5 * 1000020/HZ) - -unsigned long calibrate_tsc(void) -{ - mach_prepare_counter(); - - { - unsigned long startlow, starthigh; - unsigned long endlow, endhigh; - unsigned long count; - - rdtsc(startlow,starthigh); - mach_countup(&count); - rdtsc(endlow,endhigh); - - - /* Error: ECTCNEVERSET */ - if (count <= 1) - goto bad_ctc; - - /* 64-bit subtract - gcc just messes up with long longs */ - __asm__("subl %2,%0\n\t" - "sbbl %3,%1" - :"=a" (endlow), "=d" (endhigh) - :"g" (startlow), "g" (starthigh), - "0" (endlow), "1" (endhigh)); - - /* Error: ECPUTOOFAST */ - if (endhigh) - goto bad_ctc; - - /* Error: ECPUTOOSLOW */ - if (endlow <= CALIBRATE_TIME) - goto bad_ctc; - - __asm__("divl %2" - :"=a" (endlow), "=d" (endhigh) - :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME)); - - return endlow; - } - - /* - * The CTC wasn't reliable: we got a hit on the very first read, - * or the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ -bad_ctc: - return 0; -} - -#ifdef CONFIG_HPET_TIMER -/* ------ Calibrate the TSC using HPET ------- - * Return 2^32 * (1 / (TSC clocks per usec)) for getting the CPU freq. - * Second output is parameter 1 (when non NULL) - * Set 2^32 * (1 / (tsc per HPET clk)) for delay_hpet(). - * calibrate_tsc() calibrates the processor TSC by comparing - * it to the HPET timer of known frequency. - * Too much 64-bit arithmetic here to do this cleanly in C - */ -#define CALIBRATE_CNT_HPET (5 * hpet_tick) -#define CALIBRATE_TIME_HPET (5 * KERNEL_TICK_USEC) - -unsigned long __devinit calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr) -{ - unsigned long tsc_startlow, tsc_starthigh; - unsigned long tsc_endlow, tsc_endhigh; - unsigned long hpet_start, hpet_end; - unsigned long result, remain; - - hpet_start = hpet_readl(HPET_COUNTER); - rdtsc(tsc_startlow, tsc_starthigh); - do { - hpet_end = hpet_readl(HPET_COUNTER); - } while ((hpet_end - hpet_start) < CALIBRATE_CNT_HPET); - rdtsc(tsc_endlow, tsc_endhigh); - - /* 64-bit subtract - gcc just messes up with long longs */ - __asm__("subl %2,%0\n\t" - "sbbl %3,%1" - :"=a" (tsc_endlow), "=d" (tsc_endhigh) - :"g" (tsc_startlow), "g" (tsc_starthigh), - "0" (tsc_endlow), "1" (tsc_endhigh)); - - /* Error: ECPUTOOFAST */ - if (tsc_endhigh) - goto bad_calibration; - - /* Error: ECPUTOOSLOW */ - if (tsc_endlow <= CALIBRATE_TIME_HPET) - goto bad_calibration; - - ASM_DIV64_REG(result, remain, tsc_endlow, 0, CALIBRATE_TIME_HPET); - if (remain > (tsc_endlow >> 1)) - result++; /* rounding the result */ - - if (tsc_hpet_quotient_ptr) { - unsigned long tsc_hpet_quotient; - - ASM_DIV64_REG(tsc_hpet_quotient, remain, tsc_endlow, 0, - CALIBRATE_CNT_HPET); - if (remain > (tsc_endlow >> 1)) - tsc_hpet_quotient++; /* rounding the result */ - *tsc_hpet_quotient_ptr = tsc_hpet_quotient; - } - - return result; -bad_calibration: - /* - * the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ - return 0; -} -#endif - - -unsigned long read_timer_tsc(void) -{ - unsigned long retval; - rdtscl(retval); - return retval; -} - - -/* calculate cpu_khz */ -void init_cpu_khz(void) -{ - if (cpu_has_tsc) { - unsigned long tsc_quotient = calibrate_tsc(); - if (tsc_quotient) { - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - __asm__("divl %2" - :"=a" (cpu_khz), "=d" (edx) - :"r" (tsc_quotient), - "0" (eax), "1" (edx)); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - } - } -} - diff --git a/arch/i386/kernel/timers/timer.c b/arch/i386/kernel/timers/timer.c deleted file mode 100644 index 7e39ed8e33f..00000000000 --- a/arch/i386/kernel/timers/timer.c +++ /dev/null @@ -1,75 +0,0 @@ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <asm/timer.h> - -#ifdef CONFIG_HPET_TIMER -/* - * HPET memory read is slower than tsc reads, but is more dependable as it - * always runs at constant frequency and reduces complexity due to - * cpufreq. So, we prefer HPET timer to tsc based one. Also, we cannot use - * timer_pit when HPET is active. So, we default to timer_tsc. - */ -#endif -/* list of timers, ordered by preference, NULL terminated */ -static struct init_timer_opts* __initdata timers[] = { -#ifdef CONFIG_X86_CYCLONE_TIMER - &timer_cyclone_init, -#endif -#ifdef CONFIG_HPET_TIMER - &timer_hpet_init, -#endif -#ifdef CONFIG_X86_PM_TIMER - &timer_pmtmr_init, -#endif - &timer_tsc_init, - &timer_pit_init, - NULL, -}; - -static char clock_override[10] __initdata; - -static int __init clock_setup(char* str) -{ - if (str) - strlcpy(clock_override, str, sizeof(clock_override)); - return 1; -} -__setup("clock=", clock_setup); - - -/* The chosen timesource has been found to be bad. - * Fall back to a known good timesource (the PIT) - */ -void clock_fallback(void) -{ - cur_timer = &timer_pit; -} - -/* iterates through the list of timers, returning the first - * one that initializes successfully. - */ -struct timer_opts* __init select_timer(void) -{ - int i = 0; - - /* find most preferred working timer */ - while (timers[i]) { - if (timers[i]->init) - if (timers[i]->init(clock_override) == 0) - return timers[i]->opts; - ++i; - } - - panic("select_timer: Cannot find a suitable timer\n"); - return NULL; -} - -int read_current_timer(unsigned long *timer_val) -{ - if (cur_timer->read_timer) { - *timer_val = cur_timer->read_timer(); - return 0; - } - return -1; -} diff --git a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c deleted file mode 100644 index 13892a65c94..00000000000 --- a/arch/i386/kernel/timers/timer_cyclone.c +++ /dev/null @@ -1,259 +0,0 @@ -/* Cyclone-timer: - * This code implements timer_ops for the cyclone counter found - * on IBM x440, x360, and other Summit based systems. - * - * Copyright (C) 2002 IBM, John Stultz (johnstul@us.ibm.com) - */ - - -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/jiffies.h> - -#include <asm/timer.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/fixmap.h> -#include <asm/i8253.h> - -#include "io_ports.h" - -/* Number of usecs that the last interrupt was delayed */ -static int delay_at_last_interrupt; - -#define CYCLONE_CBAR_ADDR 0xFEB00CD0 -#define CYCLONE_PMCC_OFFSET 0x51A0 -#define CYCLONE_MPMC_OFFSET 0x51D0 -#define CYCLONE_MPCS_OFFSET 0x51A8 -#define CYCLONE_TIMER_FREQ 100000000 -#define CYCLONE_TIMER_MASK (((u64)1<<40)-1) /* 40 bit mask */ -int use_cyclone = 0; - -static u32* volatile cyclone_timer; /* Cyclone MPMC0 register */ -static u32 last_cyclone_low; -static u32 last_cyclone_high; -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -/* helper macro to atomically read both cyclone counter registers */ -#define read_cyclone_counter(low,high) \ - do{ \ - high = cyclone_timer[1]; low = cyclone_timer[0]; \ - } while (high != cyclone_timer[1]); - - -static void mark_offset_cyclone(void) -{ - unsigned long lost, delay; - unsigned long delta = last_cyclone_low; - int count; - unsigned long long this_offset, last_offset; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low; - - spin_lock(&i8253_lock); - read_cyclone_counter(last_cyclone_low,last_cyclone_high); - - /* read values for delay_at_last_interrupt */ - outb_p(0x00, 0x43); /* latch the count ASAP */ - - count = inb_p(0x40); /* read the latched count */ - count |= inb(0x40) << 8; - - /* - * VIA686a test code... reset the latch if count > max + 1 - * from timer_pit.c - cjb - */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - spin_unlock(&i8253_lock); - - /* lost tick compensation */ - delta = last_cyclone_low - delta; - delta /= (CYCLONE_TIMER_FREQ/1000000); - delta += delay_at_last_interrupt; - lost = delta/(1000000/HZ); - delay = delta%(1000000/HZ); - if (lost >= 2) - jiffies_64 += lost-1; - - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low; - monotonic_base += (this_offset - last_offset) & CYCLONE_TIMER_MASK; - write_sequnlock(&monotonic_lock); - - /* calculate delay_at_last_interrupt */ - count = ((LATCH-1) - count) * TICK_SIZE; - delay_at_last_interrupt = (count + LATCH/2) / LATCH; - - - /* catch corner case where tick rollover occured - * between cyclone and pit reads (as noted when - * usec delta is > 90% # of usecs/tick) - */ - if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) - jiffies_64++; -} - -static unsigned long get_offset_cyclone(void) -{ - u32 offset; - - if(!cyclone_timer) - return delay_at_last_interrupt; - - /* Read the cyclone timer */ - offset = cyclone_timer[0]; - - /* .. relative to previous jiffy */ - offset = offset - last_cyclone_low; - - /* convert cyclone ticks to microseconds */ - /* XXX slow, can we speed this up? */ - offset = offset/(CYCLONE_TIMER_FREQ/1000000); - - /* our adjusted time offset in microseconds */ - return delay_at_last_interrupt + offset; -} - -static unsigned long long monotonic_clock_cyclone(void) -{ - u32 now_low, now_high; - unsigned long long last_offset, this_offset, base; - unsigned long long ret; - unsigned seq; - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - - /* Read the cyclone counter */ - read_cyclone_counter(now_low,now_high); - this_offset = ((unsigned long long)now_high<<32)|now_low; - - /* convert to nanoseconds */ - ret = base + ((this_offset - last_offset)&CYCLONE_TIMER_MASK); - return ret * (1000000000 / CYCLONE_TIMER_FREQ); -} - -static int __init init_cyclone(char* override) -{ - u32* reg; - u32 base; /* saved cyclone base address */ - u32 pageaddr; /* page that contains cyclone_timer register */ - u32 offset; /* offset from pageaddr to cyclone_timer register */ - int i; - - /* check clock override */ - if (override[0] && strncmp(override,"cyclone",7)) - return -ENODEV; - - /*make sure we're on a summit box*/ - if(!use_cyclone) return -ENODEV; - - printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); - - /* find base address */ - pageaddr = (CYCLONE_CBAR_ADDR)&PAGE_MASK; - offset = (CYCLONE_CBAR_ADDR)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n"); - return -ENODEV; - } - base = *reg; - if(!base){ - printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n"); - return -ENODEV; - } - - /* setup PMCC */ - pageaddr = (base + CYCLONE_PMCC_OFFSET)&PAGE_MASK; - offset = (base + CYCLONE_PMCC_OFFSET)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n"); - return -ENODEV; - } - reg[0] = 0x00000001; - - /* setup MPCS */ - pageaddr = (base + CYCLONE_MPCS_OFFSET)&PAGE_MASK; - offset = (base + CYCLONE_MPCS_OFFSET)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n"); - return -ENODEV; - } - reg[0] = 0x00000001; - - /* map in cyclone_timer */ - pageaddr = (base + CYCLONE_MPMC_OFFSET)&PAGE_MASK; - offset = (base + CYCLONE_MPMC_OFFSET)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - cyclone_timer = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!cyclone_timer){ - printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n"); - return -ENODEV; - } - - /*quick test to make sure its ticking*/ - for(i=0; i<3; i++){ - u32 old = cyclone_timer[0]; - int stall = 100; - while(stall--) barrier(); - if(cyclone_timer[0] == old){ - printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n"); - cyclone_timer = 0; - return -ENODEV; - } - } - - init_cpu_khz(); - - /* Everything looks good! */ - return 0; -} - - -static void delay_cyclone(unsigned long loops) -{ - unsigned long bclock, now; - if(!cyclone_timer) - return; - bclock = cyclone_timer[0]; - do { - rep_nop(); - now = cyclone_timer[0]; - } while ((now-bclock) < loops); -} -/************************************************************/ - -/* cyclone timer_opts struct */ -static struct timer_opts timer_cyclone = { - .name = "cyclone", - .mark_offset = mark_offset_cyclone, - .get_offset = get_offset_cyclone, - .monotonic_clock = monotonic_clock_cyclone, - .delay = delay_cyclone, -}; - -struct init_timer_opts __initdata timer_cyclone_init = { - .init = init_cyclone, - .opts = &timer_cyclone, -}; diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c deleted file mode 100644 index 17a6fe7166e..00000000000 --- a/arch/i386/kernel/timers/timer_hpet.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * This code largely moved from arch/i386/kernel/time.c. - * See comments there for proper credits. - */ - -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/jiffies.h> - -#include <asm/timer.h> -#include <asm/io.h> -#include <asm/processor.h> - -#include "io_ports.h" -#include "mach_timer.h" -#include <asm/hpet.h> - -static unsigned long hpet_usec_quotient __read_mostly; /* convert hpet clks to usec */ -static unsigned long tsc_hpet_quotient __read_mostly; /* convert tsc to hpet clks */ -static unsigned long hpet_last; /* hpet counter value at last tick*/ -static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ -static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -/* convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better percision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ -static unsigned long cyc2ns_scale __read_mostly; -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} - -static unsigned long long monotonic_clock_hpet(void) -{ - unsigned long long last_offset, this_offset, base; - unsigned seq; - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return base + cycles_2_ns(this_offset - last_offset); -} - -static unsigned long get_offset_hpet(void) -{ - register unsigned long eax, edx; - - eax = hpet_readl(HPET_COUNTER); - eax -= hpet_last; /* hpet delta */ - eax = min(hpet_tick, eax); - /* - * Time offset = (hpet delta) * ( usecs per HPET clock ) - * = (hpet delta) * ( usecs per tick / HPET clocks per tick) - * = (hpet delta) * ( hpet_usec_quotient ) / (2^32) - * - * Where, - * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick - * - * Using a mull instead of a divl saves some cycles in critical path. - */ - ASM_MUL64_REG(eax, edx, hpet_usec_quotient, eax); - - /* our adjusted time offset in microseconds */ - return edx; -} - -static void mark_offset_hpet(void) -{ - unsigned long long this_offset, last_offset; - unsigned long offset; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - rdtsc(last_tsc_low, last_tsc_high); - - if (hpet_use_timer) - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - offset = hpet_readl(HPET_COUNTER); - if (unlikely(((offset - hpet_last) >= (2*hpet_tick)) && (hpet_last != 0))) { - int lost_ticks = ((offset - hpet_last) / hpet_tick) - 1; - jiffies_64 += lost_ticks; - } - hpet_last = offset; - - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - monotonic_base += cycles_2_ns(this_offset - last_offset); - write_sequnlock(&monotonic_lock); -} - -static void delay_hpet(unsigned long loops) -{ - unsigned long hpet_start, hpet_end; - unsigned long eax; - - /* loops is the number of cpu cycles. Convert it to hpet clocks */ - ASM_MUL64_REG(eax, loops, tsc_hpet_quotient, loops); - - hpet_start = hpet_readl(HPET_COUNTER); - do { - rep_nop(); - hpet_end = hpet_readl(HPET_COUNTER); - } while ((hpet_end - hpet_start) < (loops)); -} - -static struct timer_opts timer_hpet; - -static int __init init_hpet(char* override) -{ - unsigned long result, remain; - - /* check clock override */ - if (override[0] && strncmp(override,"hpet",4)) - return -ENODEV; - - if (!is_hpet_enabled()) - return -ENODEV; - - printk("Using HPET for gettimeofday\n"); - if (cpu_has_tsc) { - unsigned long tsc_quotient = calibrate_tsc_hpet(&tsc_hpet_quotient); - if (tsc_quotient) { - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - ASM_DIV64_REG(cpu_khz, edx, tsc_quotient, - eax, edx); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - set_cyc2ns_scale(cpu_khz); - } - /* set this only when cpu_has_tsc */ - timer_hpet.read_timer = read_timer_tsc; - } - - /* - * Math to calculate hpet to usec multiplier - * Look for the comments at get_offset_hpet() - */ - ASM_DIV64_REG(result, remain, hpet_tick, 0, KERNEL_TICK_USEC); - if (remain > (hpet_tick >> 1)) - result++; /* rounding the result */ - hpet_usec_quotient = result; - - return 0; -} - -static int hpet_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - rdtsc(last_tsc_low, last_tsc_high); - - if (hpet_use_timer) - hpet_last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - hpet_last = hpet_readl(HPET_COUNTER); - write_sequnlock(&monotonic_lock); - return 0; -} -/************************************************************/ - -/* tsc timer_opts struct */ -static struct timer_opts timer_hpet __read_mostly = { - .name = "hpet", - .mark_offset = mark_offset_hpet, - .get_offset = get_offset_hpet, - .monotonic_clock = monotonic_clock_hpet, - .delay = delay_hpet, - .resume = hpet_resume, -}; - -struct init_timer_opts __initdata timer_hpet_init = { - .init = init_hpet, - .opts = &timer_hpet, -}; diff --git a/arch/i386/kernel/timers/timer_none.c b/arch/i386/kernel/timers/timer_none.c deleted file mode 100644 index 4ea2f414dbb..00000000000 --- a/arch/i386/kernel/timers/timer_none.c +++ /dev/null @@ -1,39 +0,0 @@ -#include <linux/init.h> -#include <asm/timer.h> - -static void mark_offset_none(void) -{ - /* nothing needed */ -} - -static unsigned long get_offset_none(void) -{ - return 0; -} - -static unsigned long long monotonic_clock_none(void) -{ - return 0; -} - -static void delay_none(unsigned long loops) -{ - int d0; - __asm__ __volatile__( - "\tjmp 1f\n" - ".align 16\n" - "1:\tjmp 2f\n" - ".align 16\n" - "2:\tdecl %0\n\tjns 2b" - :"=&a" (d0) - :"0" (loops)); -} - -/* none timer_opts struct */ -struct timer_opts timer_none = { - .name = "none", - .mark_offset = mark_offset_none, - .get_offset = get_offset_none, - .monotonic_clock = monotonic_clock_none, - .delay = delay_none, -}; diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c deleted file mode 100644 index b9b6bd56b9b..00000000000 --- a/arch/i386/kernel/timers/timer_pit.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * This code largely moved from arch/i386/kernel/time.c. - * See comments there for proper credits. - */ - -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/timex.h> -#include <asm/delay.h> -#include <asm/mpspec.h> -#include <asm/timer.h> -#include <asm/smp.h> -#include <asm/io.h> -#include <asm/arch_hooks.h> -#include <asm/i8253.h> - -#include "do_timer.h" -#include "io_ports.h" - -static int count_p; /* counter in get_offset_pit() */ - -static int __init init_pit(char* override) -{ - /* check clock override */ - if (override[0] && strncmp(override,"pit",3)) - printk(KERN_ERR "Warning: clock= override failed. Defaulting " - "to PIT\n"); - init_cpu_khz(); - count_p = LATCH; - return 0; -} - -static void mark_offset_pit(void) -{ - /* nothing needed */ -} - -static unsigned long long monotonic_clock_pit(void) -{ - return 0; -} - -static void delay_pit(unsigned long loops) -{ - int d0; - __asm__ __volatile__( - "\tjmp 1f\n" - ".align 16\n" - "1:\tjmp 2f\n" - ".align 16\n" - "2:\tdecl %0\n\tjns 2b" - :"=&a" (d0) - :"0" (loops)); -} - - -/* This function must be called with xtime_lock held. - * It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs - * - * However, the pc-audio speaker driver changes the divisor so that - * it gets interrupted rather more often - it loads 64 into the - * counter rather than 11932! This has an adverse impact on - * do_gettimeoffset() -- it stops working! What is also not - * good is that the interval that our timer function gets called - * is no longer 10.0002 ms, but 9.9767 ms. To get around this - * would require using a different timing source. Maybe someone - * could use the RTC - I know that this can interrupt at frequencies - * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix - * it so that at startup, the timer code in sched.c would select - * using either the RTC or the 8253 timer. The decision would be - * based on whether there was any other device around that needed - * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz, - * and then do some jiggery to have a version of do_timer that - * advanced the clock by 1/1024 s. Every time that reached over 1/100 - * of a second, then do all the old code. If the time was kept correct - * then do_gettimeoffset could just return 0 - there is no low order - * divider that can be accessed. - * - * Ideally, you would be able to use the RTC for the speaker driver, - * but it appears that the speaker driver really needs interrupt more - * often than every 120 us or so. - * - * Anyway, this needs more thought.... pjsg (1993-08-28) - * - * If you are really that interested, you should be reading - * comp.protocols.time.ntp! - */ - -static unsigned long get_offset_pit(void) -{ - int count; - unsigned long flags; - static unsigned long jiffies_p = 0; - - /* - * cache volatile jiffies temporarily; we have xtime_lock. - */ - unsigned long jiffies_t; - - spin_lock_irqsave(&i8253_lock, flags); - /* timer count may underflow right here */ - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - - count = inb_p(PIT_CH0); /* read the latched count */ - - /* - * We do this guaranteed double memory access instead of a _p - * postfix in the previous port access. Wheee, hackady hack - */ - jiffies_t = jiffies; - - count |= inb_p(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there are two kinds of problems that must be avoided here: - * 1. the timer counter underflows - * 2. hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - */ - - if( jiffies_t == jiffies_p ) { - if( count > count_p ) { - /* the nutcase */ - count = do_timer_overflow(count); - } - } else - jiffies_p = jiffies_t; - - count_p = count; - - spin_unlock_irqrestore(&i8253_lock, flags); - - count = ((LATCH-1) - count) * TICK_SIZE; - count = (count + LATCH/2) / LATCH; - - return count; -} - - -/* tsc timer_opts struct */ -struct timer_opts timer_pit = { - .name = "pit", - .mark_offset = mark_offset_pit, - .get_offset = get_offset_pit, - .monotonic_clock = monotonic_clock_pit, - .delay = delay_pit, -}; - -struct init_timer_opts __initdata timer_pit_init = { - .init = init_pit, - .opts = &timer_pit, -}; - -void setup_pit_timer(void) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - udelay(10); - outb(LATCH >> 8 , PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); -} diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c deleted file mode 100644 index 144e94a0493..00000000000 --- a/arch/i386/kernel/timers/timer_pm.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * (C) Dominik Brodowski <linux@brodo.de> 2003 - * - * Driver to use the Power Management Timer (PMTMR) available in some - * southbridges as primary timing source for the Linux kernel. - * - * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c, - * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4. - * - * This file is licensed under the GPL v2. - */ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/types.h> -#include <asm/timer.h> -#include <asm/smp.h> -#include <asm/io.h> -#include <asm/arch_hooks.h> - -#include <linux/timex.h> -#include "mach_timer.h" - -/* Number of PMTMR ticks expected during calibration run */ -#define PMTMR_TICKS_PER_SEC 3579545 -#define PMTMR_EXPECTED_RATE \ - ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10)) - - -/* The I/O port the PMTMR resides at. - * The location is detected during setup_arch(), - * in arch/i386/acpi/boot.c */ -u32 pmtmr_ioport = 0; - - -/* value of the Power timer at last timer interrupt */ -static u32 offset_tick; -static u32 offset_delay; - -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ - -static int pmtmr_need_workaround __read_mostly = 1; - -/*helper function to safely read acpi pm timesource*/ -static inline u32 read_pmtmr(void) -{ - if (pmtmr_need_workaround) { - u32 v1, v2, v3; - - /* It has been reported that because of various broken - * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time - * source is not latched, so you must read it multiple - * times to insure a safe value is read. - */ - do { - v1 = inl(pmtmr_ioport); - v2 = inl(pmtmr_ioport); - v3 = inl(pmtmr_ioport); - } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) - || (v3 > v1 && v3 < v2)); - - /* mask the output to 24 bits */ - return v2 & ACPI_PM_MASK; - } - - return inl(pmtmr_ioport) & ACPI_PM_MASK; -} - - -/* - * Some boards have the PMTMR running way too fast. We check - * the PMTMR rate against PIT channel 2 to catch these cases. - */ -static int verify_pmtmr_rate(void) -{ - u32 value1, value2; - unsigned long count, delta; - - mach_prepare_counter(); - value1 = read_pmtmr(); - mach_countup(&count); - value2 = read_pmtmr(); - delta = (value2 - value1) & ACPI_PM_MASK; - - /* Check that the PMTMR delta is within 5% of what we expect */ - if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 || - delta > (PMTMR_EXPECTED_RATE * 21) / 20) { - printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% of normal - aborting.\n", 100UL * delta / PMTMR_EXPECTED_RATE); - return -1; - } - - return 0; -} - - -static int init_pmtmr(char* override) -{ - u32 value1, value2; - unsigned int i; - - if (override[0] && strncmp(override,"pmtmr",5)) - return -ENODEV; - - if (!pmtmr_ioport) - return -ENODEV; - - /* we use the TSC for delay_pmtmr, so make sure it exists */ - if (!cpu_has_tsc) - return -ENODEV; - - /* "verify" this timing source */ - value1 = read_pmtmr(); - for (i = 0; i < 10000; i++) { - value2 = read_pmtmr(); - if (value2 == value1) - continue; - if (value2 > value1) - goto pm_good; - if ((value2 < value1) && ((value2) < 0xFFF)) - goto pm_good; - printk(KERN_INFO "PM-Timer had inconsistent results: 0x%#x, 0x%#x - aborting.\n", value1, value2); - return -EINVAL; - } - printk(KERN_INFO "PM-Timer had no reasonable result: 0x%#x - aborting.\n", value1); - return -ENODEV; - -pm_good: - if (verify_pmtmr_rate() != 0) - return -ENODEV; - - init_cpu_khz(); - return 0; -} - -static inline u32 cyc2us(u32 cycles) -{ - /* The Power Management Timer ticks at 3.579545 ticks per microsecond. - * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%] - * - * Even with HZ = 100, delta is at maximum 35796 ticks, so it can - * easily be multiplied with 286 (=0x11E) without having to fear - * u32 overflows. - */ - cycles *= 286; - return (cycles >> 10); -} - -/* - * this gets called during each timer interrupt - * - Called while holding the writer xtime_lock - */ -static void mark_offset_pmtmr(void) -{ - u32 lost, delta, last_offset; - static int first_run = 1; - last_offset = offset_tick; - - write_seqlock(&monotonic_lock); - - offset_tick = read_pmtmr(); - - /* calculate tick interval */ - delta = (offset_tick - last_offset) & ACPI_PM_MASK; - - /* convert to usecs */ - delta = cyc2us(delta); - - /* update the monotonic base value */ - monotonic_base += delta * NSEC_PER_USEC; - write_sequnlock(&monotonic_lock); - - /* convert to ticks */ - delta += offset_delay; - lost = delta / (USEC_PER_SEC / HZ); - offset_delay = delta % (USEC_PER_SEC / HZ); - - - /* compensate for lost ticks */ - if (lost >= 2) - jiffies_64 += lost - 1; - - /* don't calculate delay for first run, - or if we've got less then a tick */ - if (first_run || (lost < 1)) { - first_run = 0; - offset_delay = 0; - } -} - -static int pmtmr_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - offset_tick = read_pmtmr(); - write_sequnlock(&monotonic_lock); - return 0; -} - -static unsigned long long monotonic_clock_pmtmr(void) -{ - u32 last_offset, this_offset; - unsigned long long base, ret; - unsigned seq; - - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = offset_tick; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - /* Read the pmtmr */ - this_offset = read_pmtmr(); - - /* convert to nanoseconds */ - ret = (this_offset - last_offset) & ACPI_PM_MASK; - ret = base + (cyc2us(ret) * NSEC_PER_USEC); - return ret; -} - -static void delay_pmtmr(unsigned long loops) -{ - unsigned long bclock, now; - - rdtscl(bclock); - do - { - rep_nop(); - rdtscl(now); - } while ((now-bclock) < loops); -} - - -/* - * get the offset (in microseconds) from the last call to mark_offset() - * - Called holding a reader xtime_lock - */ -static unsigned long get_offset_pmtmr(void) -{ - u32 now, offset, delta = 0; - - offset = offset_tick; - now = read_pmtmr(); - delta = (now - offset)&ACPI_PM_MASK; - - return (unsigned long) offset_delay + cyc2us(delta); -} - - -/* acpi timer_opts struct */ -static struct timer_opts timer_pmtmr = { - .name = "pmtmr", - .mark_offset = mark_offset_pmtmr, - .get_offset = get_offset_pmtmr, - .monotonic_clock = monotonic_clock_pmtmr, - .delay = delay_pmtmr, - .read_timer = read_timer_tsc, - .resume = pmtmr_resume, -}; - -struct init_timer_opts __initdata timer_pmtmr_init = { - .init = init_pmtmr, - .opts = &timer_pmtmr, -}; - -#ifdef CONFIG_PCI -/* - * PIIX4 Errata: - * - * The power management timer may return improper results when read. - * Although the timer value settles properly after incrementing, - * while incrementing there is a 3 ns window every 69.8 ns where the - * timer value is indeterminate (a 4.2% chance that the data will be - * incorrect when read). As a result, the ACPI free running count up - * timer specification is violated due to erroneous reads. - */ -static int __init pmtmr_bug_check(void) -{ - static struct pci_device_id gray_list[] __initdata = { - /* these chipsets may have bug. */ - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801DB_0) }, - { }, - }; - struct pci_dev *dev; - int pmtmr_has_bug = 0; - u8 rev; - - if (cur_timer != &timer_pmtmr || !pmtmr_need_workaround) - return 0; - - dev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, NULL); - if (dev) { - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - /* the bug has been fixed in PIIX4M */ - if (rev < 3) { - printk(KERN_WARNING "* Found PM-Timer Bug on this " - "chipset. Due to workarounds for a bug,\n" - "* this time source is slow. Consider trying " - "other time sources (clock=)\n"); - pmtmr_has_bug = 1; - } - pci_dev_put(dev); - } - - if (pci_dev_present(gray_list)) { - printk(KERN_WARNING "* This chipset may have PM-Timer Bug. Due" - " to workarounds for a bug,\n" - "* this time source is slow. If you are sure your timer" - " does not have\n" - "* this bug, please use \"pmtmr_good\" to disable the " - "workaround\n"); - pmtmr_has_bug = 1; - } - - if (!pmtmr_has_bug) - pmtmr_need_workaround = 0; - - return 0; -} -device_initcall(pmtmr_bug_check); -#endif - -static int __init pmtr_good_setup(char *__str) -{ - pmtmr_need_workaround = 0; - return 1; -} -__setup("pmtmr_good", pmtr_good_setup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86"); diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c deleted file mode 100644 index f1187ddb0d0..00000000000 --- a/arch/i386/kernel/timers/timer_tsc.c +++ /dev/null @@ -1,617 +0,0 @@ -/* - * This code largely moved from arch/i386/kernel/time.c. - * See comments there for proper credits. - * - * 2004-06-25 Jesper Juhl - * moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4 - * failing to inline. - */ - -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/cpufreq.h> -#include <linux/string.h> -#include <linux/jiffies.h> - -#include <asm/timer.h> -#include <asm/io.h> -/* processor.h for distable_tsc flag */ -#include <asm/processor.h> - -#include "io_ports.h" -#include "mach_timer.h" - -#include <asm/hpet.h> -#include <asm/i8253.h> - -#ifdef CONFIG_HPET_TIMER -static unsigned long hpet_usec_quotient; -static unsigned long hpet_last; -static struct timer_opts timer_tsc; -#endif - -static inline void cpufreq_delayed_get(void); - -int tsc_disable __devinitdata = 0; - -static int use_tsc; -/* Number of usecs that the last interrupt was delayed */ -static int delay_at_last_interrupt; - -static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ -static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -/* Avoid compensating for lost ticks before TSCs are synched */ -static int detect_lost_ticks; -static int __init start_lost_tick_compensation(void) -{ - detect_lost_ticks = 1; - return 0; -} -late_initcall(start_lost_tick_compensation); - -/* convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better percision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ -static unsigned long cyc2ns_scale __read_mostly; -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} - -static int count2; /* counter for mark_offset_tsc() */ - -/* Cached *multiplier* to convert TSC counts to microseconds. - * (see the equation below). - * Equal to 2^32 * (1 / (clocks per usec) ). - * Initialized in time_init. - */ -static unsigned long fast_gettimeoffset_quotient; - -static unsigned long get_offset_tsc(void) -{ - register unsigned long eax, edx; - - /* Read the Time Stamp Counter */ - - rdtsc(eax,edx); - - /* .. relative to previous jiffy (32 bits is enough) */ - eax -= last_tsc_low; /* tsc_low delta */ - - /* - * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient - * = (tsc_low delta) * (usecs_per_clock) - * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy) - * - * Using a mull instead of a divl saves up to 31 clock cycles - * in the critical path. - */ - - __asm__("mull %2" - :"=a" (eax), "=d" (edx) - :"rm" (fast_gettimeoffset_quotient), - "0" (eax)); - - /* our adjusted time offset in microseconds */ - return delay_at_last_interrupt + edx; -} - -static unsigned long long monotonic_clock_tsc(void) -{ - unsigned long long last_offset, this_offset, base; - unsigned seq; - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return base + cycles_2_ns(this_offset - last_offset); -} - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - unsigned long long this_offset; - - /* - * In the NUMA case we dont use the TSC as they are not - * synchronized across all CPUs. - */ -#ifndef CONFIG_NUMA - if (!use_tsc) -#endif - /* no locking but a rare wrong value is not a big deal */ - return jiffies_64 * (1000000000 / HZ); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return cycles_2_ns(this_offset); -} - -static void delay_tsc(unsigned long loops) -{ - unsigned long bclock, now; - - rdtscl(bclock); - do - { - rep_nop(); - rdtscl(now); - } while ((now-bclock) < loops); -} - -#ifdef CONFIG_HPET_TIMER -static void mark_offset_tsc_hpet(void) -{ - unsigned long long this_offset, last_offset; - unsigned long offset, temp, hpet_current; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - /* - * It is important that these two operations happen almost at - * the same time. We do the RDTSC stuff first, since it's - * faster. To avoid any inconsistencies, we need interrupts - * disabled locally. - */ - /* - * Interrupts are just disabled locally since the timer irq - * has the SA_INTERRUPT flag set. -arca - */ - /* read Pentium cycle counter */ - - hpet_current = hpet_readl(HPET_COUNTER); - rdtsc(last_tsc_low, last_tsc_high); - - /* lost tick compensation */ - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; - if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0)) - && detect_lost_ticks) { - int lost_ticks = (offset - hpet_last) / hpet_tick; - jiffies_64 += lost_ticks; - } - hpet_last = hpet_current; - - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - monotonic_base += cycles_2_ns(this_offset - last_offset); - write_sequnlock(&monotonic_lock); - - /* calculate delay_at_last_interrupt */ - /* - * Time offset = (hpet delta) * ( usecs per HPET clock ) - * = (hpet delta) * ( usecs per tick / HPET clocks per tick) - * = (hpet delta) * ( hpet_usec_quotient ) / (2^32) - * Where, - * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick - */ - delay_at_last_interrupt = hpet_current - offset; - ASM_MUL64_REG(temp, delay_at_last_interrupt, - hpet_usec_quotient, delay_at_last_interrupt); -} -#endif - - -#ifdef CONFIG_CPU_FREQ -#include <linux/workqueue.h> - -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(void *v) -{ - unsigned int cpu; - for_each_online_cpu(cpu) { - cpufreq_get(cpu); - } - cpufreq_delayed_issched = 0; -} - -/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static inline void cpufreq_delayed_get(void) -{ - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n"); - schedule_work(&cpufreq_delayed_get_work); - } -} - -/* If the CPU frequency is scaled, TSC-based delays will need a different - * loops_per_jiffy value to function properly. - */ - -static unsigned int ref_freq = 0; -static unsigned long loops_per_jiffy_ref = 0; - -#ifndef CONFIG_SMP -static unsigned long fast_gettimeoffset_ref = 0; -static unsigned int cpu_khz_ref = 0; -#endif - -static int -time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - - if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) - write_seqlock_irq(&xtime_lock); - if (!ref_freq) { - if (!freq->old){ - ref_freq = freq->new; - goto end; - } - ref_freq = freq->old; - loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; -#ifndef CONFIG_SMP - fast_gettimeoffset_ref = fast_gettimeoffset_quotient; - cpu_khz_ref = cpu_khz; -#endif - } - - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); -#ifndef CONFIG_SMP - if (cpu_khz) - cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); - if (use_tsc) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { - fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq); - set_cyc2ns_scale(cpu_khz); - } - } -#endif - } - -end: - if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) - write_sequnlock_irq(&xtime_lock); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - - -static int __init cpufreq_tsc(void) -{ - int ret; - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); - ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - if (!ret) - cpufreq_init = 1; - return ret; -} -core_initcall(cpufreq_tsc); - -#else /* CONFIG_CPU_FREQ */ -static inline void cpufreq_delayed_get(void) { return; } -#endif - -int recalibrate_cpu_khz(void) -{ -#ifndef CONFIG_SMP - unsigned int cpu_khz_old = cpu_khz; - - if (cpu_has_tsc) { - local_irq_disable(); - init_cpu_khz(); - local_irq_enable(); - cpu_data[0].loops_per_jiffy = - cpufreq_scale(cpu_data[0].loops_per_jiffy, - cpu_khz_old, - cpu_khz); - return 0; - } else - return -ENODEV; -#else - return -ENODEV; -#endif -} -EXPORT_SYMBOL(recalibrate_cpu_khz); - -static void mark_offset_tsc(void) -{ - unsigned long lost,delay; - unsigned long delta = last_tsc_low; - int count; - int countmp; - static int count1 = 0; - unsigned long long this_offset, last_offset; - static int lost_count = 0; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - /* - * It is important that these two operations happen almost at - * the same time. We do the RDTSC stuff first, since it's - * faster. To avoid any inconsistencies, we need interrupts - * disabled locally. - */ - - /* - * Interrupts are just disabled locally since the timer irq - * has the SA_INTERRUPT flag set. -arca - */ - - /* read Pentium cycle counter */ - - rdtsc(last_tsc_low, last_tsc_high); - - spin_lock(&i8253_lock); - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb(PIT_CH0) << 8; - - /* - * VIA686a test code... reset the latch if count > max + 1 - * from timer_pit.c - cjb - */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - spin_unlock(&i8253_lock); - - if (pit_latch_buggy) { - /* get center value of last 3 time lutch */ - if ((count2 >= count && count >= count1) - || (count1 >= count && count >= count2)) { - count2 = count1; count1 = count; - } else if ((count1 >= count2 && count2 >= count) - || (count >= count2 && count2 >= count1)) { - countmp = count;count = count2; - count2 = count1;count1 = countmp; - } else { - count2 = count1; count1 = count; count = count1; - } - } - - /* lost tick compensation */ - delta = last_tsc_low - delta; - { - register unsigned long eax, edx; - eax = delta; - __asm__("mull %2" - :"=a" (eax), "=d" (edx) - :"rm" (fast_gettimeoffset_quotient), - "0" (eax)); - delta = edx; - } - delta += delay_at_last_interrupt; - lost = delta/(1000000/HZ); - delay = delta%(1000000/HZ); - if (lost >= 2 && detect_lost_ticks) { - jiffies_64 += lost-1; - - /* sanity check to ensure we're not always losing ticks */ - if (lost_count++ > 100) { - printk(KERN_WARNING "Losing too many ticks!\n"); - printk(KERN_WARNING "TSC cannot be used as a timesource. \n"); - printk(KERN_WARNING "Possible reasons for this are:\n"); - printk(KERN_WARNING " You're running with Speedstep,\n"); - printk(KERN_WARNING " You don't have DMA enabled for your hard disk (see hdparm),\n"); - printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system (see dmesg).\n"); - printk(KERN_WARNING "Falling back to a sane timesource now.\n"); - - clock_fallback(); - } - /* ... but give the TSC a fair chance */ - if (lost_count > 25) - cpufreq_delayed_get(); - } else - lost_count = 0; - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - monotonic_base += cycles_2_ns(this_offset - last_offset); - write_sequnlock(&monotonic_lock); - - /* calculate delay_at_last_interrupt */ - count = ((LATCH-1) - count) * TICK_SIZE; - delay_at_last_interrupt = (count + LATCH/2) / LATCH; - - /* catch corner case where tick rollover occured - * between tsc and pit reads (as noted when - * usec delta is > 90% # of usecs/tick) - */ - if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) - jiffies_64++; -} - -static int __init init_tsc(char* override) -{ - - /* check clock override */ - if (override[0] && strncmp(override,"tsc",3)) { -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled()) { - printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n"); - } else -#endif - { - return -ENODEV; - } - } - - /* - * If we have APM enabled or the CPU clock speed is variable - * (CPU stops clock on HLT or slows clock to save power) - * then the TSC timestamps may diverge by up to 1 jiffy from - * 'real time' but nothing will break. - * The most frequent case is that the CPU is "woken" from a halt - * state by the timer interrupt itself, so we get 0 error. In the - * rare cases where a driver would "wake" the CPU and request a - * timestamp, the maximum error is < 1 jiffy. But timestamps are - * still perfectly ordered. - * Note that the TSC counter will be reset if APM suspends - * to disk; this won't break the kernel, though, 'cuz we're - * smart. See arch/i386/kernel/apm.c. - */ - /* - * Firstly we have to do a CPU check for chips with - * a potentially buggy TSC. At this point we haven't run - * the ident/bugs checks so we must run this hook as it - * may turn off the TSC flag. - * - * NOTE: this doesn't yet handle SMP 486 machines where only - * some CPU's have a TSC. Thats never worked and nobody has - * moaned if you have the only one in the world - you fix it! - */ - - count2 = LATCH; /* initialize counter for mark_offset_tsc() */ - - if (cpu_has_tsc) { - unsigned long tsc_quotient; -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled() && hpet_use_timer) { - unsigned long result, remain; - printk("Using TSC for gettimeofday\n"); - tsc_quotient = calibrate_tsc_hpet(NULL); - timer_tsc.mark_offset = &mark_offset_tsc_hpet; - /* - * Math to calculate hpet to usec multiplier - * Look for the comments at get_offset_tsc_hpet() - */ - ASM_DIV64_REG(result, remain, hpet_tick, - 0, KERNEL_TICK_USEC); - if (remain > (hpet_tick >> 1)) - result++; /* rounding the result */ - - hpet_usec_quotient = result; - } else -#endif - { - tsc_quotient = calibrate_tsc(); - } - - if (tsc_quotient) { - fast_gettimeoffset_quotient = tsc_quotient; - use_tsc = 1; - /* - * We could be more selective here I suspect - * and just enable this for the next intel chips ? - */ - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - __asm__("divl %2" - :"=a" (cpu_khz), "=d" (edx) - :"r" (tsc_quotient), - "0" (eax), "1" (edx)); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - set_cyc2ns_scale(cpu_khz); - return 0; - } - } - return -ENODEV; -} - -static int tsc_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - rdtsc(last_tsc_low, last_tsc_high); -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled() && hpet_use_timer) - hpet_last = hpet_readl(HPET_COUNTER); -#endif - write_sequnlock(&monotonic_lock); - return 0; -} - -#ifndef CONFIG_X86_TSC -/* disable flag for tsc. Takes effect by clearing the TSC cpu flag - * in cpu/common.c */ -static int __init tsc_setup(char *str) -{ - tsc_disable = 1; - return 1; -} -#else -static int __init tsc_setup(char *str) -{ - printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " - "cannot disable TSC.\n"); - return 1; -} -#endif -__setup("notsc", tsc_setup); - - - -/************************************************************/ - -/* tsc timer_opts struct */ -static struct timer_opts timer_tsc = { - .name = "tsc", - .mark_offset = mark_offset_tsc, - .get_offset = get_offset_tsc, - .monotonic_clock = monotonic_clock_tsc, - .delay = delay_tsc, - .read_timer = read_timer_tsc, - .resume = tsc_resume, -}; - -struct init_timer_opts __initdata timer_tsc_init = { - .init = init_tsc, - .opts = &timer_tsc, -}; diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c new file mode 100644 index 00000000000..7e0d8dab207 --- /dev/null +++ b/arch/i386/kernel/tsc.c @@ -0,0 +1,478 @@ +/* + * This code largely moved from arch/i386/kernel/timer/timer_tsc.c + * which was originally moved from arch/i386/kernel/time.c. + * See comments there for proper credits. + */ + +#include <linux/clocksource.h> +#include <linux/workqueue.h> +#include <linux/cpufreq.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/dmi.h> + +#include <asm/delay.h> +#include <asm/tsc.h> +#include <asm/delay.h> +#include <asm/io.h> + +#include "mach_timer.h" + +/* + * On some systems the TSC frequency does not + * change with the cpu frequency. So we need + * an extra value to store the TSC freq + */ +unsigned int tsc_khz; + +int tsc_disable __cpuinitdata = 0; + +#ifdef CONFIG_X86_TSC +static int __init tsc_setup(char *str) +{ + printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " + "cannot disable TSC.\n"); + return 1; +} +#else +/* + * disable flag for tsc. Takes effect by clearing the TSC cpu flag + * in cpu/common.c + */ +static int __init tsc_setup(char *str) +{ + tsc_disable = 1; + + return 1; +} +#endif + +__setup("notsc", tsc_setup); + +/* + * code to mark and check if the TSC is unstable + * due to cpufreq or due to unsynced TSCs + */ +static int tsc_unstable; + +static inline int check_tsc_unstable(void) +{ + return tsc_unstable; +} + +void mark_tsc_unstable(void) +{ + tsc_unstable = 1; +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +/* Accellerators for sched_clock() + * convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better percision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ +static unsigned long cyc2ns_scale __read_mostly; + +#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ + +static inline void set_cyc2ns_scale(unsigned long cpu_khz) +{ + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; +} + +static inline unsigned long long cycles_2_ns(unsigned long long cyc) +{ + return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; +} + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long sched_clock(void) +{ + unsigned long long this_offset; + + /* + * in the NUMA case we dont use the TSC as they are not + * synchronized across all CPUs. + */ +#ifndef CONFIG_NUMA + if (!cpu_khz || check_tsc_unstable()) +#endif + /* no locking but a rare wrong value is not a big deal */ + return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); + + /* read the Time Stamp Counter: */ + rdtscll(this_offset); + + /* return the value in ns */ + return cycles_2_ns(this_offset); +} + +static unsigned long calculate_cpu_khz(void) +{ + unsigned long long start, end; + unsigned long count; + u64 delta64; + int i; + unsigned long flags; + + local_irq_save(flags); + + /* run 3 times to ensure the cache is warm */ + for (i = 0; i < 3; i++) { + mach_prepare_counter(); + rdtscll(start); + mach_countup(&count); + rdtscll(end); + } + /* + * Error: ECTCNEVERSET + * The CTC wasn't reliable: we got a hit on the very first read, + * or the CPU was so fast/slow that the quotient wouldn't fit in + * 32 bits.. + */ + if (count <= 1) + goto err; + + delta64 = end - start; + + /* cpu freq too fast: */ + if (delta64 > (1ULL<<32)) + goto err; + + /* cpu freq too slow: */ + if (delta64 <= CALIBRATE_TIME_MSEC) + goto err; + + delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */ + do_div(delta64,CALIBRATE_TIME_MSEC); + + local_irq_restore(flags); + return (unsigned long)delta64; +err: + local_irq_restore(flags); + return 0; +} + +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + cpu_khz = calculate_cpu_khz(); + tsc_khz = cpu_khz; + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} + +EXPORT_SYMBOL(recalibrate_cpu_khz); + +void tsc_init(void) +{ + if (!cpu_has_tsc || tsc_disable) + return; + + cpu_khz = calculate_cpu_khz(); + tsc_khz = cpu_khz; + + if (!cpu_khz) + return; + + printk("Detected %lu.%03lu MHz processor.\n", + (unsigned long)cpu_khz / 1000, + (unsigned long)cpu_khz % 1000); + + set_cyc2ns_scale(cpu_khz); + use_tsc_delay(); +} + +#ifdef CONFIG_CPU_FREQ + +static unsigned int cpufreq_delayed_issched = 0; +static unsigned int cpufreq_init = 0; +static struct work_struct cpufreq_delayed_get_work; + +static void handle_cpufreq_delayed_get(void *v) +{ + unsigned int cpu; + + for_each_online_cpu(cpu) + cpufreq_get(cpu); + + cpufreq_delayed_issched = 0; +} + +/* + * if we notice cpufreq oddness, schedule a call to cpufreq_get() as it tries + * to verify the CPU frequency the timing core thinks the CPU is running + * at is still correct. + */ +static inline void cpufreq_delayed_get(void) +{ + if (cpufreq_init && !cpufreq_delayed_issched) { + cpufreq_delayed_issched = 1; + printk(KERN_DEBUG "Checking if CPU frequency changed.\n"); + schedule_work(&cpufreq_delayed_get_work); + } +} + +/* + * if the CPU frequency is scaled, TSC-based delays will need a different + * loops_per_jiffy value to function properly. + */ +static unsigned int ref_freq = 0; +static unsigned long loops_per_jiffy_ref = 0; +static unsigned long cpu_khz_ref = 0; + +static int +time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + + if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) + write_seqlock_irq(&xtime_lock); + + if (!ref_freq) { + if (!freq->old){ + ref_freq = freq->new; + goto end; + } + ref_freq = freq->old; + loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; + cpu_khz_ref = cpu_khz; + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + cpu_data[freq->cpu].loops_per_jiffy = + cpufreq_scale(loops_per_jiffy_ref, + ref_freq, freq->new); + + if (cpu_khz) { + + if (num_online_cpus() == 1) + cpu_khz = cpufreq_scale(cpu_khz_ref, + ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { + tsc_khz = cpu_khz; + set_cyc2ns_scale(cpu_khz); + /* + * TSC based sched_clock turns + * to junk w/ cpufreq + */ + mark_tsc_unstable(); + } + } + } +end: + if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) + write_sequnlock_irq(&xtime_lock); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + int ret; + + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); + ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (!ret) + cpufreq_init = 1; + + return ret; +} + +core_initcall(cpufreq_tsc); + +#endif + +/* clock source code */ + +static unsigned long current_tsc_khz = 0; +static int tsc_update_callback(void); + +static cycle_t read_tsc(void) +{ + cycle_t ret; + + rdtscll(ret); + + return ret; +} + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .update_callback = tsc_update_callback, + .is_continuous = 1, +}; + +static int tsc_update_callback(void) +{ + int change = 0; + + /* check to see if we should switch to the safe clocksource: */ + if (clocksource_tsc.rating != 50 && check_tsc_unstable()) { + clocksource_tsc.rating = 50; + clocksource_reselect(); + change = 1; + } + + /* only update if tsc_khz has changed: */ + if (current_tsc_khz != tsc_khz) { + current_tsc_khz = tsc_khz; + clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, + clocksource_tsc.shift); + change = 1; + } + + return change; +} + +static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d) +{ + printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", + d->ident); + mark_tsc_unstable(); + return 0; +} + +/* List of systems that have known TSC problems */ +static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { + { + .callback = dmi_mark_tsc_unstable, + .ident = "IBM Thinkpad 380XD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), + }, + }, + {} +}; + +#define TSC_FREQ_CHECK_INTERVAL (10*MSEC_PER_SEC) /* 10sec in MS */ +static struct timer_list verify_tsc_freq_timer; + +/* XXX - Probably should add locking */ +static void verify_tsc_freq(unsigned long unused) +{ + static u64 last_tsc; + static unsigned long last_jiffies; + + u64 now_tsc, interval_tsc; + unsigned long now_jiffies, interval_jiffies; + + + if (check_tsc_unstable()) + return; + + rdtscll(now_tsc); + now_jiffies = jiffies; + + if (!last_jiffies) { + goto out; + } + + interval_jiffies = now_jiffies - last_jiffies; + interval_tsc = now_tsc - last_tsc; + interval_tsc *= HZ; + do_div(interval_tsc, cpu_khz*1000); + + if (interval_tsc < (interval_jiffies * 3 / 4)) { + printk("TSC appears to be running slowly. " + "Marking it as unstable\n"); + mark_tsc_unstable(); + return; + } + +out: + last_tsc = now_tsc; + last_jiffies = now_jiffies; + /* set us up to go off on the next interval: */ + mod_timer(&verify_tsc_freq_timer, + jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL)); +} + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +static __init int unsynchronized_tsc(void) +{ + /* + * Intel systems are normally all synchronized. + * Exceptions must mark TSC as unstable: + */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + return 0; + + /* assume multi socket systems are not synchronized: */ + return num_possible_cpus() > 1; +} + +static int __init init_tsc_clocksource(void) +{ + + if (cpu_has_tsc && tsc_khz && !tsc_disable) { + /* check blacklist */ + dmi_check_system(bad_tsc_dmi_table); + + if (unsynchronized_tsc()) /* mark unstable if unsynced */ + mark_tsc_unstable(); + current_tsc_khz = tsc_khz; + clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, + clocksource_tsc.shift); + /* lower the rating if we already know its unstable: */ + if (check_tsc_unstable()) + clocksource_tsc.rating = 50; + + init_timer(&verify_tsc_freq_timer); + verify_tsc_freq_timer.function = verify_tsc_freq; + verify_tsc_freq_timer.expires = + jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL); + add_timer(&verify_tsc_freq_timer); + + return clocksource_register(&clocksource_tsc); + } + + return 0; +} + +module_init(init_tsc_clocksource); diff --git a/arch/i386/lib/delay.c b/arch/i386/lib/delay.c index c49a6acbee5..3c0714c4b66 100644 --- a/arch/i386/lib/delay.c +++ b/arch/i386/lib/delay.c @@ -10,43 +10,92 @@ * we have to worry about. */ +#include <linux/module.h> #include <linux/config.h> #include <linux/sched.h> #include <linux/delay.h> -#include <linux/module.h> + #include <asm/processor.h> #include <asm/delay.h> #include <asm/timer.h> #ifdef CONFIG_SMP -#include <asm/smp.h> +# include <asm/smp.h> #endif -extern struct timer_opts* timer; +/* simple loop based delay: */ +static void delay_loop(unsigned long loops) +{ + int d0; + + __asm__ __volatile__( + "\tjmp 1f\n" + ".align 16\n" + "1:\tjmp 2f\n" + ".align 16\n" + "2:\tdecl %0\n\tjns 2b" + :"=&a" (d0) + :"0" (loops)); +} + +/* TSC based delay: */ +static void delay_tsc(unsigned long loops) +{ + unsigned long bclock, now; + + rdtscl(bclock); + do { + rep_nop(); + rdtscl(now); + } while ((now-bclock) < loops); +} + +/* + * Since we calibrate only once at boot, this + * function should be set once at boot and not changed + */ +static void (*delay_fn)(unsigned long) = delay_loop; + +void use_tsc_delay(void) +{ + delay_fn = delay_tsc; +} + +int read_current_timer(unsigned long *timer_val) +{ + if (delay_fn == delay_tsc) { + rdtscl(*timer_val); + return 0; + } + return -1; +} void __delay(unsigned long loops) { - cur_timer->delay(loops); + delay_fn(loops); } inline void __const_udelay(unsigned long xloops) { int d0; + xloops *= 4; __asm__("mull %0" :"=d" (xloops), "=&a" (d0) - :"1" (xloops),"0" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))); - __delay(++xloops); + :"1" (xloops), "0" + (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))); + + __delay(++xloops); } void __udelay(unsigned long usecs) { - __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */ + __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */ } void __ndelay(unsigned long nsecs) { - __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ + __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ } EXPORT_SYMBOL(__delay); diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index bd6fe96cc16..6ee7faaf2c1 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -30,6 +30,40 @@ extern void die(const char *,struct pt_regs *,long); +#ifdef CONFIG_KPROBES +ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); +int register_page_fault_notifier(struct notifier_block *nb) +{ + vmalloc_sync_all(); + return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); +} + +int unregister_page_fault_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); +} + +static inline int notify_page_fault(enum die_val val, const char *str, + struct pt_regs *regs, long err, int trap, int sig) +{ + struct die_args args = { + .regs = regs, + .str = str, + .err = err, + .trapnr = trap, + .signr = sig + }; + return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); +} +#else +static inline int notify_page_fault(enum die_val val, const char *str, + struct pt_regs *regs, long err, int trap, int sig) +{ + return NOTIFY_DONE; +} +#endif + + /* * Unlock any spinlocks which will prevent us from getting the * message out @@ -324,7 +358,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, if (unlikely(address >= TASK_SIZE)) { if (!(error_code & 0x0000000d) && vmalloc_fault(address) >= 0) return; - if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, SIGSEGV) == NOTIFY_STOP) return; /* @@ -334,7 +368,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, SIGSEGV) == NOTIFY_STOP) return; diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index ec0fd3cfa77..fa8a37bcb39 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -281,9 +281,9 @@ static int nmi_create_files(struct super_block * sb, struct dentry * root) for (i = 0; i < model->num_counters; ++i) { struct dentry * dir; - char buf[2]; + char buf[4]; - snprintf(buf, 2, "%d", i); + snprintf(buf, sizeof(buf), "%d", i); dir = oprofilefs_mkdir(sb, root, buf); oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled); oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event); diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c index 1eec0868f4b..ed1512a175a 100644 --- a/arch/i386/pci/pcbios.c +++ b/arch/i386/pci/pcbios.c @@ -371,8 +371,7 @@ void __devinit pcibios_sort(void) list_for_each(ln, &pci_devices) { d = pci_dev_g(ln); if (d->bus->number == bus && d->devfn == devfn) { - list_del(&d->global_list); - list_add_tail(&d->global_list, &sorted_devices); + list_move_tail(&d->global_list, &sorted_devices); if (d == dev) found = 1; break; @@ -390,8 +389,7 @@ void __devinit pcibios_sort(void) if (!found) { printk(KERN_WARNING "PCI: Device %s not found by BIOS\n", pci_name(dev)); - list_del(&dev->global_list); - list_add_tail(&dev->global_list, &sorted_devices); + list_move_tail(&dev->global_list, &sorted_devices); } } list_splice(&sorted_devices, &pci_devices); |