diff options
Diffstat (limited to 'arch/m68k/include/asm')
42 files changed, 2106 insertions, 1686 deletions
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h index 1cf54476745..ec514485c8b 100644 --- a/arch/m68k/include/asm/checksum.h +++ b/arch/m68k/include/asm/checksum.h @@ -1,5 +1,170 @@ -#ifdef __uClinux__ -#include "checksum_no.h" +#ifndef _M68K_CHECKSUM_H +#define _M68K_CHECKSUM_H + +#include <linux/in6.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, + void *dst, + int len, __wsum sum, + int *csum_err); + +extern __wsum csum_partial_copy_nocheck(const void *src, + void *dst, int len, + __wsum sum); + + +#ifdef CONFIG_COLDFIRE + +/* + * The ColdFire cores don't support all the 68k instructions used + * in the optimized checksum code below. So it reverts back to using + * more standard C coded checksums. The fast checksum code is + * significantly larger than the optimized version, so it is not + * inlined here. + */ +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; + + tmp = (tmp & 0xffff) + (tmp >> 16); + tmp = (tmp & 0xffff) + (tmp >> 16); + + return (__force __sum16)~tmp; +} + #else -#include "checksum_mm.h" -#endif + +/* + * This is a version of ip_fast_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum = 0; + unsigned long tmp; + + __asm__ ("subqw #1,%2\n" + "1:\t" + "movel %1@+,%3\n\t" + "addxl %3,%0\n\t" + "dbra %2,1b\n\t" + "movel %0,%3\n\t" + "swap %3\n\t" + "addxw %3,%0\n\t" + "clrw %3\n\t" + "addxw %3,%0\n\t" + : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) + : "0" (sum), "1" (iph), "2" (ihl) + : "memory"); + return (__force __sum16)~sum; +} + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; + + __asm__("swap %1\n\t" + "addw %1, %0\n\t" + "clrw %1\n\t" + "addxw %1, %0" + : "=&d" (sum), "=&d" (tmp) + : "0" (sum), "1" (tmp)); + + return (__force __sum16)~sum; +} + +#endif /* CONFIG_COLDFIRE */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__ ("addl %2,%0\n\t" + "addxl %3,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=d" (saddr) + : "g" (daddr), "1" (saddr), "d" (len + proto), + "0" (sum)); + return sum; +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + register unsigned long tmp; + __asm__("addl %2@,%0\n\t" + "movel %2@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(12),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@,%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(12),%1\n\t" + "addxl %1,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (tmp) + : "a" (saddr), "a" (daddr), "d" (len + proto), + "0" (sum)); + + return csum_fold(sum); +} + +#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h deleted file mode 100644 index 494f9aec37e..00000000000 --- a/arch/m68k/include/asm/checksum_mm.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include <linux/in6.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, - int len, __wsum sum, - int *csum_err); - -extern __wsum csum_partial_copy_nocheck(const void *src, - void *dst, int len, - __wsum sum); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum = 0; - unsigned long tmp; - - __asm__ ("subqw #1,%2\n" - "1:\t" - "movel %1@+,%3\n\t" - "addxl %3,%0\n\t" - "dbra %2,1b\n\t" - "movel %0,%3\n\t" - "swap %3\n\t" - "addxw %3,%0\n\t" - "clrw %3\n\t" - "addxw %3,%0\n\t" - : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) - : "0" (sum), "1" (iph), "2" (ihl) - : "memory"); - return (__force __sum16)~sum; -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (tmp)); - return (__force __sum16)~sum; -} - - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %2,%0\n\t" - "addxl %3,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=d" (saddr) - : "g" (daddr), "1" (saddr), "d" (len + proto), - "0" (sum)); - return sum; -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h deleted file mode 100644 index 81883482ffb..00000000000 --- a/arch/m68k/include/asm/checksum_no.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include <linux/in6.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, int len, __wsum sum, int *csum_err); - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; -#ifdef CONFIG_COLDFIRE - tmp = (tmp & 0xffff) + (tmp >> 16); - tmp = (tmp & 0xffff) + (tmp >> 16); - return (__force __sum16)~tmp; -#else - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (sum)); - return (__force __sum16)~sum; -#endif -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %1,%0\n\t" - "addxl %4,%0\n\t" - "addxl %5,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (saddr) - : "0" (daddr), "1" (saddr), "d" (len + proto), - "d"(sum)); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index b82e660cf1c..6fbdfe89510 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -1,5 +1,491 @@ -#ifdef __uClinux__ -#include "dma_no.h" +#ifndef _M68K_DMA_H +#define _M68K_DMA_H 1 + +#ifdef CONFIG_COLDFIRE +/* + * ColdFire DMA Model: + * ColdFire DMA supports two forms of DMA: Single and Dual address. Single + * address mode emits a source address, and expects that the device will either + * pick up the data (DMA READ) or source data (DMA WRITE). This implies that + * the device will place data on the correct byte(s) of the data bus, as the + * memory transactions are always 32 bits. This implies that only 32 bit + * devices will find single mode transfers useful. Dual address DMA mode + * performs two cycles: source read and destination write. ColdFire will + * align the data so that the device will always get the correct bytes, thus + * is useful for 8 and 16 bit devices. This is the mode that is supported + * below. + * + * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * APR/18/2002 : added proper support for MCF5272 DMA controller. + * Arthur Shipkowski (art@videon-central.com) + */ + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfdma.h> + +/* + * Set number of channels of DMA on ColdFire for different implementations. + */ +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ + defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MAX_M68K_DMA_CHANNELS 4 +#elif defined(CONFIG_M5272) +#define MAX_M68K_DMA_CHANNELS 1 +#elif defined(CONFIG_M532x) +#define MAX_M68K_DMA_CHANNELS 0 #else -#include "dma_mm.h" +#define MAX_M68K_DMA_CHANNELS 2 #endif + +extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +#if !defined(CONFIG_M5272) +#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ +#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ +#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ +#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ 0 +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE 1 +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD 2 +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD 3 +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG 4 +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG 5 +/* I/O to memory, 8 bits, single-address-mode */ +#define DMA_MODE_READ_SINGLE 8 +/* memory to I/O, 8 bits, single-address-mode */ +#define DMA_MODE_WRITE_SINGLE 9 +/* I/O to memory, 16 bits, single-address-mode */ +#define DMA_MODE_READ_WORD_SINGLE 10 +/* memory to I/O, 16 bits, single-address-mode */ +#define DMA_MODE_WRITE_WORD_SINGLE 11 +/* I/O to memory, 32 bits, single-address-mode */ +#define DMA_MODE_READ_LONG_SINGLE 12 +/* memory to I/O, 32 bits, single-address-mode */ +#define DMA_MODE_WRITE_LONG_SINGLE 13 + +#else /* CONFIG_M5272 is defined */ + +/* Source static-address mode */ +#define DMA_MODE_SRC_SA_BIT 0x01 +/* Two bits to select between all four modes */ +#define DMA_MODE_SSIZE_MASK 0x06 +/* Offset to shift bits in */ +#define DMA_MODE_SSIZE_OFF 0x01 +/* Destination static-address mode */ +#define DMA_MODE_DES_SA_BIT 0x10 +/* Two bits to select between all four modes */ +#define DMA_MODE_DSIZE_MASK 0x60 +/* Offset to shift bits in */ +#define DMA_MODE_DSIZE_OFF 0x05 +/* Size modifiers */ +#define DMA_MODE_SIZE_LONG 0x00 +#define DMA_MODE_SIZE_BYTE 0x01 +#define DMA_MODE_SIZE_WORD 0x02 +#define DMA_MODE_SIZE_LINE 0x03 + +/* + * Aliases to help speed quick ports; these may be suboptimal, however. They + * do not include the SINGLE mode modifiers since the MCF5272 does not have a + * mode where the device is in control of its addressing. + */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) + +#endif /* !defined(CONFIG_M5272) */ + +#if !defined(CONFIG_M5272) +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + volatile unsigned char *dmapb; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmapb = (unsigned char *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; + dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned char *dmabp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + + dmabp = (unsigned char *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + /* Clear config errors */ + dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; + + /* Set command register */ + dmawp[MCFDMA_DCR] = + MCFDMA_DCR_INT | /* Enable completion irq */ + MCFDMA_DCR_CS | /* Force one xfer per request */ + MCFDMA_DCR_AA | /* Enable auto alignment */ + /* single-address-mode */ + ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | + /* sets s_rw (-> r/w) high if Memory to I/0 */ + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | + /* Memory to I/O or I/O to Memory */ + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | + /* 32 bit, 16 bit or 8 bit transfers */ + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : + MCFDMA_DCR_SSIZE_BYTE)) | + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : + MCFDMA_DCR_DSIZE_BYTE)); + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], + (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned short *dmawp; + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Determine which address registers are used for memory/device accesses */ + if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { + /* Source incrementing, must be memory */ + dmalp[MCFDMA_SAR] = a; + /* Set dest address, must be device */ + dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; + } else { + /* Destination incrementing, must be memory */ + dmalp[MCFDMA_DAR] = a; + /* Set source address, must be device */ + dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], + (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], + (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_BCR] = (unsigned short)count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + unsigned short count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + count = dmawp[MCFDMA_BCR]; + return((int) count); +} +#else /* CONFIG_M5272 is defined */ + +/* + * The MCF5272 DMA controller is very different than the controller defined above + * in terms of register mapping. For instance, with the exception of the 16-bit + * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. + * + * The big difference, however, is the lack of device-requested DMA. All modes + * are dual address transfer, and there is no 'device' setup or direction bit. + * You can DMA between a device and memory, between memory and memory, or even between + * two devices directly, with any combination of incrementing and non-incrementing + * addresses you choose. This puts a crimp in distinguishing between the 'device + * address' set up by set_dma_device_addr. + * + * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, + * which will act exactly as above in -- it will look to see if the source is set to + * autoincrement, and if so it will make the source use the set_dma_addr value and the + * destination the set_dma_device_addr value. Otherwise the source will be set to the + * set_dma_device_addr value and the destination will get the set_dma_addr value. + * + * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions + * and make it explicit. Depending on what you're doing, one of these two should work + * for you, but don't mix them in the same transfer setup. + */ + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned int *dmalp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + /* Clear config errors */ + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; + + /* Set command register */ + dmalp[MCFDMA_DMR] = + MCFDMA_DMR_RQM_DUAL | /* Mandatory Request Mode setting */ + MCFDMA_DMR_DSTT_SD | /* Set up addressing types; set to supervisor-data. */ + MCFDMA_DMR_SRCT_SD | /* Set up addressing types; set to supervisor-data. */ + /* source static-address-mode */ + ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | + /* dest static-address-mode */ + ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | + /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */ + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); + + dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], + (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Determine which address registers are used for memory/device accesses */ + if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { + /* Source incrementing, must be memory */ + dmalp[MCFDMA_DSAR] = a; + /* Set dest address, must be device */ + dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; + } else { + /* Destination incrementing, must be memory */ + dmalp[MCFDMA_DDAR] = a; + /* Set source address, must be device */ + dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], + (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], + (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + * + * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DBCR] = count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + unsigned int count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + count = dmalp[MCFDMA_DBCR]; + return(count); +} + +#endif /* !defined(CONFIG_M5272) */ +#endif /* CONFIG_COLDFIRE */ + +/* it's useless on the m68k, but unfortunately needed by the new + bootmem allocator (but this should do it for this) */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +#define MAX_DMA_CHANNELS 8 + +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +#define isa_dma_bridge_buggy (0) + +#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h deleted file mode 100644 index 4240fbc946f..00000000000 --- a/arch/m68k/include/asm/dma_mm.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - - -/* it's useless on the m68k, but unfortunately needed by the new - bootmem allocator (but this should do it for this) */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -#define MAX_DMA_CHANNELS 8 - -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#define isa_dma_bridge_buggy (0) - -#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h deleted file mode 100644 index 939a0205621..00000000000 --- a/arch/m68k/include/asm/dma_no.h +++ /dev/null @@ -1,494 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - -//#define DMA_DEBUG 1 - - -#ifdef CONFIG_COLDFIRE -/* - * ColdFire DMA Model: - * ColdFire DMA supports two forms of DMA: Single and Dual address. Single - * address mode emits a source address, and expects that the device will either - * pick up the data (DMA READ) or source data (DMA WRITE). This implies that - * the device will place data on the correct byte(s) of the data bus, as the - * memory transactions are always 32 bits. This implies that only 32 bit - * devices will find single mode transfers useful. Dual address DMA mode - * performs two cycles: source read and destination write. ColdFire will - * align the data so that the device will always get the correct bytes, thus - * is useful for 8 and 16 bit devices. This is the mode that is supported - * below. - * - * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * APR/18/2002 : added proper support for MCF5272 DMA controller. - * Arthur Shipkowski (art@videon-central.com) - */ - -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfdma.h> - -/* - * Set number of channels of DMA on ColdFire for different implementations. - */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MAX_M68K_DMA_CHANNELS 4 -#elif defined(CONFIG_M5272) -#define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M532x) -#define MAX_M68K_DMA_CHANNELS 0 -#else -#define MAX_M68K_DMA_CHANNELS 2 -#endif - -extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; - -#if !defined(CONFIG_M5272) -#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ -#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ -#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ -#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ 0 -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE 1 -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD 2 -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD 3 -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG 4 -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG 5 -/* I/O to memory, 8 bits, single-address-mode */ -#define DMA_MODE_READ_SINGLE 8 -/* memory to I/O, 8 bits, single-address-mode */ -#define DMA_MODE_WRITE_SINGLE 9 -/* I/O to memory, 16 bits, single-address-mode */ -#define DMA_MODE_READ_WORD_SINGLE 10 -/* memory to I/O, 16 bits, single-address-mode */ -#define DMA_MODE_WRITE_WORD_SINGLE 11 -/* I/O to memory, 32 bits, single-address-mode */ -#define DMA_MODE_READ_LONG_SINGLE 12 -/* memory to I/O, 32 bits, single-address-mode */ -#define DMA_MODE_WRITE_LONG_SINGLE 13 - -#else /* CONFIG_M5272 is defined */ - -/* Source static-address mode */ -#define DMA_MODE_SRC_SA_BIT 0x01 -/* Two bits to select between all four modes */ -#define DMA_MODE_SSIZE_MASK 0x06 -/* Offset to shift bits in */ -#define DMA_MODE_SSIZE_OFF 0x01 -/* Destination static-address mode */ -#define DMA_MODE_DES_SA_BIT 0x10 -/* Two bits to select between all four modes */ -#define DMA_MODE_DSIZE_MASK 0x60 -/* Offset to shift bits in */ -#define DMA_MODE_DSIZE_OFF 0x05 -/* Size modifiers */ -#define DMA_MODE_SIZE_LONG 0x00 -#define DMA_MODE_SIZE_BYTE 0x01 -#define DMA_MODE_SIZE_WORD 0x02 -#define DMA_MODE_SIZE_LINE 0x03 - -/* - * Aliases to help speed quick ports; these may be suboptimal, however. They - * do not include the SINGLE mode modifiers since the MCF5272 does not have a - * mode where the device is in control of its addressing. - */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) - -#endif /* !defined(CONFIG_M5272) */ - -#if !defined(CONFIG_M5272) -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - volatile unsigned char *dmapb; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmapb = (unsigned char *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; - dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned char *dmabp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - - dmabp = (unsigned char *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; - - // Set command register - dmawp[MCFDMA_DCR] = - MCFDMA_DCR_INT | // Enable completion irq - MCFDMA_DCR_CS | // Force one xfer per request - MCFDMA_DCR_AA | // Enable auto alignment - // single-address-mode - ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | - // sets s_rw (-> r/w) high if Memory to I/0 - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | - // Memory to I/O or I/O to Memory - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | - // 32 bit, 16 bit or 8 bit transfers - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : - MCFDMA_DCR_SSIZE_BYTE)) | - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : - MCFDMA_DCR_DSIZE_BYTE)); - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], - (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned short *dmawp; - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { - // Source incrementing, must be memory - dmalp[MCFDMA_SAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DAR] = a; - // Set source address, must be device - dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], - (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], - (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_BCR] = (unsigned short)count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - unsigned short count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - count = dmawp[MCFDMA_BCR]; - return((int) count); -} -#else /* CONFIG_M5272 is defined */ - -/* - * The MCF5272 DMA controller is very different than the controller defined above - * in terms of register mapping. For instance, with the exception of the 16-bit - * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. - * - * The big difference, however, is the lack of device-requested DMA. All modes - * are dual address transfer, and there is no 'device' setup or direction bit. - * You can DMA between a device and memory, between memory and memory, or even between - * two devices directly, with any combination of incrementing and non-incrementing - * addresses you choose. This puts a crimp in distinguishing between the 'device - * address' set up by set_dma_device_addr. - * - * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, - * which will act exactly as above in -- it will look to see if the source is set to - * autoincrement, and if so it will make the source use the set_dma_addr value and the - * destination the set_dma_device_addr value. Otherwise the source will be set to the - * set_dma_device_addr value and the destination will get the set_dma_addr value. - * - * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions - * and make it explicit. Depending on what you're doing, one of these two should work - * for you, but don't mix them in the same transfer setup. - */ - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned int *dmalp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; - - // Set command register - dmalp[MCFDMA_DMR] = - MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting - MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. - MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. - // source static-address-mode - ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | - // dest static-address-mode - ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | - // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); - - dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], - (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { - // Source incrementing, must be memory - dmalp[MCFDMA_DSAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DDAR] = a; - // Set source address, must be device - dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], - (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], - (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - * - * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DBCR] = count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - unsigned int count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - count = dmalp[MCFDMA_DBCR]; - return(count); -} - -#endif /* !defined(CONFIG_M5272) */ -#endif /* CONFIG_COLDFIRE */ - -#define MAX_DMA_CHANNELS 8 - -/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any - occurrence should be flagged as an error. */ -/* under 2.4 it is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h deleted file mode 100644 index e037d4e2de3..00000000000 --- a/arch/m68k/include/asm/elia.h +++ /dev/null @@ -1,41 +0,0 @@ -/****************************************************************************/ - -/* - * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) - * (C) Copyright 1999-2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef elia_h -#define elia_h -/****************************************************************************/ - -#include <asm/coldfire.h> - -#ifdef CONFIG_eLIA - -/* - * The serial port DTR and DCD lines are also on the Parallel I/O - * as well, so define those too. - */ - -#define eLIA_DCD1 0x0001 -#define eLIA_DCD0 0x0002 -#define eLIA_DTR1 0x0004 -#define eLIA_DTR0 0x0008 - -#define eLIA_PCIRESET 0x0020 - -/* - * Kernel macros to set and unset the LEDs. - */ -#ifndef __ASSEMBLY__ -extern unsigned short ppdata; -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_eLIA */ - -/****************************************************************************/ -#endif /* elia_h */ diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h index 5202f5a5b42..47412588621 100644 --- a/arch/m68k/include/asm/entry_mm.h +++ b/arch/m68k/include/asm/entry_mm.h @@ -46,7 +46,6 @@ #define curptr a2 LFLUSH_I_AND_D = 0x00000808 -LSIGTRAP = 5 /* process bits for task_struct.ptrace */ PT_TRACESYS_OFF = 3 @@ -118,9 +117,6 @@ PT_DTRACE_BIT = 2 #define STR(X) STR1(X) #define STR1(X) #X -#define PT_OFF_ORIG_D0 0x24 -#define PT_OFF_FORMATVEC 0x32 -#define PT_OFF_SR 0x2C #define SAVE_ALL_INT \ "clrl %%sp@-;" /* stk_adj */ \ "pea -1:w;" /* orig d0 = -1 */ \ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h index c2553d26273..907ed03d792 100644 --- a/arch/m68k/include/asm/entry_no.h +++ b/arch/m68k/include/asm/entry_no.h @@ -72,8 +72,8 @@ LENOSYS = 38 lea %sp@(-32),%sp /* space for 8 regs */ moveml %d1-%d5/%a0-%a2,%sp@ movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ + movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ + movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ bra 7f 6: clrl %sp@- /* stkadj */ @@ -89,8 +89,8 @@ LENOSYS = 38 bnes 8f /* no, skip */ move #0x2700,%sr /* disable intrs */ movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ + movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ moveml %sp@,%d1-%d5/%a0-%a2 lea %sp@(32),%sp /* space for 8 regs */ movel %sp@+,%d0 diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h new file mode 100644 index 00000000000..283214dc65a --- /dev/null +++ b/arch/m68k/include/asm/gpio.h @@ -0,0 +1,238 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#ifndef coldfire_gpio_h +#define coldfire_gpio_h + +#include <linux/io.h> +#include <asm-generic/gpio.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> + +/* + * The Freescale Coldfire family is quite varied in how they implement GPIO. + * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have + * only one port, others have multiple ports; some have a single data latch + * for both input and output, others have a separate pin data register to read + * input; some require a read-modify-write access to change an output, others + * have set and clear registers for some of the outputs; Some have all the + * GPIOs in a single control area, others have some GPIOs implemented in + * different modules. + * + * This implementation attempts accomodate the differences while presenting + * a generic interface that will optimize to as few instructions as possible. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + +/* These parts have GPIO organized by 8 bit ports */ + +#define MCFGPIO_PORTTYPE u8 +#define MCFGPIO_PORTSIZE 8 +#define mcfgpio_read(port) __raw_readb(port) +#define mcfgpio_write(data, port) __raw_writeb(data, port) + +#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272) + +/* These parts have GPIO organized by 16 bit ports */ + +#define MCFGPIO_PORTTYPE u16 +#define MCFGPIO_PORTSIZE 16 +#define mcfgpio_read(port) __raw_readw(port) +#define mcfgpio_write(data, port) __raw_writew(data, port) + +#elif defined(CONFIG_M5249) + +/* These parts have GPIO organized by 32 bit ports */ + +#define MCFGPIO_PORTTYPE u32 +#define MCFGPIO_PORTSIZE 32 +#define mcfgpio_read(port) __raw_readl(port) +#define mcfgpio_write(data, port) __raw_writel(data, port) + +#endif + +#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE)) +#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE) + +#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) +/* + * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses + * read-modify-write to change an output and a GPIO module which has separate + * set/clr registers to directly change outputs with a single write access. + */ +#if defined(CONFIG_M528x) +/* + * The 528x also has GPIOs in other modules (GPT, QADC) which use + * read-modify-write as well as those controlled by the EPORT and GPIO modules. + */ +#define MCFGPIO_SCR_START 40 +#else +#define MCFGPIO_SCR_START 8 +#endif + +#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) + +#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) +#else + +#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX +/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */ +#define MCFGPIO_SETR_PORT(gpio) 0 +#define MCFGPIO_CLRR_PORT(gpio) 0 + +#endif +/* + * Coldfire specific helper functions + */ + +/* return the port pin data register for a gpio */ +static inline u32 __mcf_gpio_ppdr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) + if (gpio < 32) + return MCFSIM2_GPIOREAD; + else + return MCFSIM2_GPIO1READ; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + if (gpio < 8) + return MCFEPORT_EPPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif + else + return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#endif +} + +/* return the port output data register for a gpio */ +static inline u32 __mcf_gpio_podr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) + if (gpio < 32) + return MCFSIM2_GPIOWRITE; + else + return MCFSIM2_GPIO1WRITE; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + if (gpio < 8) + return MCFEPORT_EPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif + else + return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#endif +} + +/* + * The Generic GPIO functions + * + * If the gpio is a compile time constant and is one of the Coldfire gpios, + * use the inline version, otherwise dispatch thru gpiolib. + */ + +static inline int gpio_get_value(unsigned gpio) +{ + if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) + return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) { + if (gpio < MCFGPIO_SCR_START) { + unsigned long flags; + MCFGPIO_PORTTYPE data; + + local_irq_save(flags); + data = mcfgpio_read(__mcf_gpio_podr(gpio)); + if (value) + data |= mcfgpio_bit(gpio); + else + data &= ~mcfgpio_bit(gpio); + mcfgpio_write(data, __mcf_gpio_podr(gpio)); + local_irq_restore(flags); + } else { + if (value) + mcfgpio_write(mcfgpio_bit(gpio), + MCFGPIO_SETR_PORT(gpio)); + else + mcfgpio_write(~mcfgpio_bit(gpio), + MCFGPIO_CLRR_PORT(gpio)); + } + } else + __gpio_set_value(gpio, value); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return (irq >= MCFGPIO_IRQ_VECBASE && + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ? + irq - MCFGPIO_IRQ_VECBASE : -ENXIO; +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); +} + +#endif diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h index bfad28149a4..b44b14be87d 100644 --- a/arch/m68k/include/asm/hardirq_no.h +++ b/arch/m68k/include/asm/hardirq_no.h @@ -1,16 +1,8 @@ #ifndef __M68K_HARDIRQ_H #define __M68K_HARDIRQ_H -#include <linux/cache.h> -#include <linux/threads.h> #include <asm/irq.h> -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - #define HARDIRQ_BITS 8 /* @@ -22,6 +14,6 @@ typedef struct { # error HARDIRQ_BITS is too low! #endif -void ack_bad_irq(unsigned int irq); +#include <asm-generic/hardirq.h> #endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 6adef1ee208..7f57436ec18 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len) #define insw(a,b,l) io_insw(a,b,l) #define insl(a,b,l) io_insl(a,b,l) -#define IO_SPACE_LIMIT 0xffff +#define IO_SPACE_LIMIT 0xffffffff /* Values for nocacheflag and cmode */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d031416595b..907eff1edd2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -1,5 +1,134 @@ -#ifdef __uClinux__ -#include "irq_no.h" +#ifndef _M68K_IRQ_H_ +#define _M68K_IRQ_H_ + +/* + * This should be the same as the max(NUM_X_SOURCES) for all the + * different m68k hosts compiled into the kernel. + * Currently the Atari has 72 and the Amiga 24, but if both are + * supported in the kernel it is better to make room for 72. + */ +#if defined(CONFIG_COLDFIRE) +#define NR_IRQS 256 +#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) +#define NR_IRQS 200 +#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) +#define NR_IRQS 72 +#elif defined(CONFIG_Q40) +#define NR_IRQS 43 +#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU) +#define NR_IRQS 32 +#elif defined(CONFIG_APOLLO) +#define NR_IRQS 24 +#elif defined(CONFIG_HP300) +#define NR_IRQS 8 #else -#include "irq_mm.h" +#define NR_IRQS 0 #endif + +#ifdef CONFIG_MMU + +#include <linux/linkage.h> +#include <linux/hardirq.h> +#include <linux/irqreturn.h> +#include <linux/spinlock_types.h> + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +/* + * Interrupt source definitions + * General interrupt sources are the level 1-7. + * Adding an interrupt service routine for one of these sources + * results in the addition of that routine to a chain of routines. + * Each one is called in succession. Each individual interrupt + * service routine should determine if the device associated with + * that routine requires service. + */ + +#define IRQ_SPURIOUS 0 + +#define IRQ_AUTO_1 1 /* level 1 interrupt */ +#define IRQ_AUTO_2 2 /* level 2 interrupt */ +#define IRQ_AUTO_3 3 /* level 3 interrupt */ +#define IRQ_AUTO_4 4 /* level 4 interrupt */ +#define IRQ_AUTO_5 5 /* level 5 interrupt */ +#define IRQ_AUTO_6 6 /* level 6 interrupt */ +#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ + +#define IRQ_USER 8 + +extern unsigned int irq_canonicalize(unsigned int irq); + +struct pt_regs; + +/* + * various flags for request_irq() - the Amiga now uses the standard + * mechanism like all other architectures - IRQF_DISABLED and + * IRQF_SHARED are your friends. + */ +#ifndef MACH_AMIGA_ONLY +#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ +#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ +#define IRQ_FLG_FAST (0x0004) +#define IRQ_FLG_SLOW (0x0008) +#define IRQ_FLG_STD (0x8000) /* internally used */ +#endif + +/* + * This structure is used to chain together the ISRs for a particular + * interrupt source (if it supports chaining). + */ +typedef struct irq_node { + irqreturn_t (*handler)(int, void *); + void *dev_id; + struct irq_node *next; + unsigned long flags; + const char *devname; +} irq_node_t; + +/* + * This structure has only 4 elements for speed reasons + */ +struct irq_handler { + int (*handler)(int, void *); + unsigned long flags; + void *dev_id; + const char *devname; +}; + +struct irq_controller { + const char *name; + spinlock_t lock; + int (*startup)(unsigned int irq); + void (*shutdown)(unsigned int irq); + void (*enable)(unsigned int irq); + void (*disable)(unsigned int irq); +}; + +extern int m68k_irq_startup(unsigned int); +extern void m68k_irq_shutdown(unsigned int); + +/* + * This function returns a new irq_node_t + */ +extern irq_node_t *new_irq_node(void); + +extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, + void (*handler)(unsigned int, struct pt_regs *)); +extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); + +asmlinkage void m68k_handle_int(unsigned int); +asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); + +#else +#define irq_canonicalize(irq) (irq) +#endif /* CONFIG_MMU */ + +#endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h deleted file mode 100644 index 0cab42cad79..00000000000 --- a/arch/m68k/include/asm/irq_mm.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _M68K_IRQ_H_ -#define _M68K_IRQ_H_ - -#include <linux/linkage.h> -#include <linux/hardirq.h> -#include <linux/irqreturn.h> -#include <linux/spinlock_types.h> - -/* - * This should be the same as the max(NUM_X_SOURCES) for all the - * different m68k hosts compiled into the kernel. - * Currently the Atari has 72 and the Amiga 24, but if both are - * supported in the kernel it is better to make room for 72. - */ -#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -#define NR_IRQS 200 -#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) -#define NR_IRQS 72 -#elif defined(CONFIG_Q40) -#define NR_IRQS 43 -#elif defined(CONFIG_AMIGA) -#define NR_IRQS 32 -#elif defined(CONFIG_APOLLO) -#define NR_IRQS 24 -#elif defined(CONFIG_HP300) -#define NR_IRQS 8 -#else -#define NR_IRQS 0 -#endif - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -/* - * Interrupt source definitions - * General interrupt sources are the level 1-7. - * Adding an interrupt service routine for one of these sources - * results in the addition of that routine to a chain of routines. - * Each one is called in succession. Each individual interrupt - * service routine should determine if the device associated with - * that routine requires service. - */ - -#define IRQ_SPURIOUS 0 - -#define IRQ_AUTO_1 1 /* level 1 interrupt */ -#define IRQ_AUTO_2 2 /* level 2 interrupt */ -#define IRQ_AUTO_3 3 /* level 3 interrupt */ -#define IRQ_AUTO_4 4 /* level 4 interrupt */ -#define IRQ_AUTO_5 5 /* level 5 interrupt */ -#define IRQ_AUTO_6 6 /* level 6 interrupt */ -#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ - -#define IRQ_USER 8 - -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -typedef struct irq_node { - irqreturn_t (*handler)(int, void *); - void *dev_id; - struct irq_node *next; - unsigned long flags; - const char *devname; -} irq_node_t; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_controller { - const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); -}; - -extern int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); - -/* - * This function returns a new irq_node_t - */ -extern irq_node_t *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); - -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); - -#endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h deleted file mode 100644 index 9373c31ac87..00000000000 --- a/arch/m68k/include/asm/irq_no.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_IRQ_H_ -#define _M68KNOMMU_IRQ_H_ - -#ifdef CONFIG_COLDFIRE -/* - * On the ColdFire we keep track of all vectors. That way drivers - * can register whatever vector number they wish, and we can deal - * with it. - */ -#define SYS_IRQS 256 -#define NR_IRQS SYS_IRQS - -#else - -/* - * # of m68k interrupts - */ -#define SYS_IRQS 8 -#define NR_IRQS (24 + SYS_IRQS) - -#endif /* CONFIG_COLDFIRE */ - - -#define irq_canonicalize(irq) (irq) - -#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index 7e3594dea88..9c384e294af 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -85,8 +85,21 @@ #define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ #endif -#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */ + +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + +/* + * Generic GPIO + */ +#define MCFGPIO_PIN_MAX 8 +#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_IRQ_MAX -1 /* * Some symbol defines for the Parallel Port Pin Assignment Register @@ -111,21 +124,5 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ #endif -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ -#endif - -/* - * Macro to get and set IMR register. It is 16 bits on the 5206. - */ -#define mcf_getimr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) - -#define mcf_getipr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) - /****************************************************************************/ #endif /* m5206sim_h */ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 83bbcfd6e8f..ed2b69b9680 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -11,9 +11,8 @@ #define m520xsim_h /****************************************************************************/ - /* - * Define the 5282 SIM register set addresses. + * Define the 520x SIM register set addresses. */ #define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ @@ -22,8 +21,22 @@ #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_SIMR 0x1c /* Set interrupt mask 0-63 */ +#define MCFINTC_CIMR 0x1d /* Clear interrupt mask 0-63 */ #define MCFINTC_ICR0 0x40 /* Base ICR register */ +/* + * The common interrupt controller code just wants to know the absolute + * address to the SIMR and CIMR registers (not offsets into IPSBAR). + * The 520x family only has a single INTC unit. + */ +#define MCFINTC0_SIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR) +#define MCFINTC0_CIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR) +#define MCFINTC0_ICR0 (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0) +#define MCFINTC1_SIMR (0) +#define MCFINTC1_CIMR (0) +#define MCFINTC1_ICR0 (0) + #define MCFINT_VECBASE 64 #define MCFINT_UART0 26 /* Interrupt number for UART0 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ @@ -41,6 +54,62 @@ #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ +#define MCFEPORT_EPDDR 0xFC088002 +#define MCFEPORT_EPDR 0xFC088004 +#define MCFEPORT_EPPDR 0xFC088005 + +#define MCFGPIO_PODR_BUSCTL 0xFC0A4000 +#define MCFGPIO_PODR_BE 0xFC0A4001 +#define MCFGPIO_PODR_CS 0xFC0A4002 +#define MCFGPIO_PODR_FECI2C 0xFC0A4003 +#define MCFGPIO_PODR_QSPI 0xFC0A4004 +#define MCFGPIO_PODR_TIMER 0xFC0A4005 +#define MCFGPIO_PODR_UART 0xFC0A4006 +#define MCFGPIO_PODR_FECH 0xFC0A4007 +#define MCFGPIO_PODR_FECL 0xFC0A4008 + +#define MCFGPIO_PDDR_BUSCTL 0xFC0A400C +#define MCFGPIO_PDDR_BE 0xFC0A400D +#define MCFGPIO_PDDR_CS 0xFC0A400E +#define MCFGPIO_PDDR_FECI2C 0xFC0A400F +#define MCFGPIO_PDDR_QSPI 0xFC0A4010 +#define MCFGPIO_PDDR_TIMER 0xFC0A4011 +#define MCFGPIO_PDDR_UART 0xFC0A4012 +#define MCFGPIO_PDDR_FECH 0xFC0A4013 +#define MCFGPIO_PDDR_FECL 0xFC0A4014 + +#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A +#define MCFGPIO_PPDSDR_BE 0xFC0A401B +#define MCFGPIO_PPDSDR_CS 0xFC0A401C +#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D +#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E +#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F +#define MCFGPIO_PPDSDR_UART 0xFC0A4021 +#define MCFGPIO_PPDSDR_FECH 0xFC0A4021 +#define MCFGPIO_PPDSDR_FECL 0xFC0A4022 + +#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024 +#define MCFGPIO_PCLRR_BE 0xFC0A4025 +#define MCFGPIO_PCLRR_CS 0xFC0A4026 +#define MCFGPIO_PCLRR_FECI2C 0xFC0A4027 +#define MCFGPIO_PCLRR_QSPI 0xFC0A4028 +#define MCFGPIO_PCLRR_TIMER 0xFC0A4029 +#define MCFGPIO_PCLRR_UART 0xFC0A402A +#define MCFGPIO_PCLRR_FECH 0xFC0A402B +#define MCFGPIO_PCLRR_FECL 0xFC0A402C +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL +#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL + +#define MCFGPIO_PIN_MAX 80 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/****************************************************************************/ #define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_FECI2C (0xA4033) @@ -55,10 +124,6 @@ #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) -#define ICR_INTRCONF 0x05 -#define MCFPIT_IMR MCFINTC_IMRL -#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) - /* * Reset Controll Unit. */ diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 55183b5df1b..a34894cf8e6 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -50,5 +50,82 @@ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ +#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) +#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) +#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002) +#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003) +#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004) +#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005) +#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006) +#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007) +#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008) +#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009) +#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A) +#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B) +#define MCFGPIO_PODR_ETPU (MCF_IPSBAR + 0x10000C) + +#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010) +#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011) +#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012) +#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013) +#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014) +#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015) +#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016) +#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017) +#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018) +#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019) +#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A) +#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B) +#define MCFGPIO_PDDR_ETPU (MCF_IPSBAR + 0x10001C) + +#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020) +#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021) +#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022) +#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023) +#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024) +#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025) +#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026) +#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027) +#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028) +#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029) +#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A) +#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B) +#define MCFGPIO_PPDSDR_ETPU (MCF_IPSBAR + 0x10002C) + +#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030) +#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031) +#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032) +#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033) +#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034) +#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035) +#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036) +#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037) +#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038) +#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039) +#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A) +#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B) +#define MCFGPIO_PCLRR_ETPU (MCF_IPSBAR + 0x10003C) + +/* + * EPort + */ + +#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) +#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) + +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR + +#define MCFGPIO_PIN_MAX 107 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + /****************************************************************************/ #endif /* m523xsim_h */ diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 366eb8602d2..14bce877ed8 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -71,16 +71,22 @@ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ /* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + +/* * General purpose IO registers (in MBAR2). */ -#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ -#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ -#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ -#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ -#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ -#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ -#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ -#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ +#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */ +#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */ +#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */ +#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */ +#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */ +#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */ +#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */ +#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */ #define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ #define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ @@ -100,20 +106,28 @@ #define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ #define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ - /* - * Macro to set IMR register. It is 32 bits on the 5249. + * Define the base interrupt for the second interrupt controller. + * We set it to 128, out of the way of the base interrupts, and plenty + * of room for its 64 interrupts. */ -#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ +#define MCFINTC2_VECBASE 128 -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) +#define MCFINTC2_GPIOIRQ0 (MCFINTC2_VECBASE + 32) +#define MCFINTC2_GPIOIRQ1 (MCFINTC2_VECBASE + 33) +#define MCFINTC2_GPIOIRQ2 (MCFINTC2_VECBASE + 34) +#define MCFINTC2_GPIOIRQ3 (MCFINTC2_VECBASE + 35) +#define MCFINTC2_GPIOIRQ4 (MCFINTC2_VECBASE + 36) +#define MCFINTC2_GPIOIRQ5 (MCFINTC2_VECBASE + 37) +#define MCFINTC2_GPIOIRQ6 (MCFINTC2_VECBASE + 38) +#define MCFINTC2_GPIOIRQ7 (MCFINTC2_VECBASE + 39) -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 64 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /****************************************************************************/ @@ -137,9 +151,9 @@ subql #1,%a1 /* get MBAR2 address in a1 */ /* - * Move secondary interrupts to base at 128. + * Move secondary interrupts to their base (128). */ - moveb #0x80,%d0 + moveb #MCFINTC2_VECBASE,%d0 moveb %d0,0x16b(%a1) /* interrupt base register */ /* diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 6217edc2113..df3332c2317 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -12,7 +12,6 @@ #define m5272sim_h /****************************************************************************/ - /* * Define the 5272 SIM register set addresses. */ @@ -63,16 +62,59 @@ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ -#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ -#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ -#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ -#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ -#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ -#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ -#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ -#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ -#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ +#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ +#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */ +#define MCFSIM_PBCNT (MCF_MBAR + 0x88) /* Port B Control (r/w) */ +#define MCFSIM_PBDDR (MCF_MBAR + 0x8c) /* Port B Direction (r/w) */ +#define MCFSIM_PBDAT (MCF_MBAR + 0x8e) /* Port B Data (r/w) */ +#define MCFSIM_PCDDR (MCF_MBAR + 0x94) /* Port C Direction (r/w) */ +#define MCFSIM_PCDAT (MCF_MBAR + 0x96) /* Port C Data (r/w) */ +#define MCFSIM_PDCNT (MCF_MBAR + 0x98) /* Port D Control (r/w) */ + +/* + * Define system peripheral IRQ usage. + */ +#define MCFINT_VECBASE 64 /* Base of interrupts */ +#define MCF_IRQ_SPURIOUS 64 /* User Spurious */ +#define MCF_IRQ_EINT1 65 /* External Interrupt 1 */ +#define MCF_IRQ_EINT2 66 /* External Interrupt 2 */ +#define MCF_IRQ_EINT3 67 /* External Interrupt 3 */ +#define MCF_IRQ_EINT4 68 /* External Interrupt 4 */ +#define MCF_IRQ_TIMER1 69 /* Timer 1 */ +#define MCF_IRQ_TIMER2 70 /* Timer 2 */ +#define MCF_IRQ_TIMER3 71 /* Timer 3 */ +#define MCF_IRQ_TIMER4 72 /* Timer 4 */ +#define MCF_IRQ_UART1 73 /* UART 1 */ +#define MCF_IRQ_UART2 74 /* UART 2 */ +#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ +#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */ +#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */ +#define MCF_IRQ_USB1 78 /* USB Endpoint 1 */ +#define MCF_IRQ_USB2 79 /* USB Endpoint 2 */ +#define MCF_IRQ_USB3 80 /* USB Endpoint 3 */ +#define MCF_IRQ_USB4 81 /* USB Endpoint 4 */ +#define MCF_IRQ_USB5 82 /* USB Endpoint 5 */ +#define MCF_IRQ_USB6 83 /* USB Endpoint 6 */ +#define MCF_IRQ_USB7 84 /* USB Endpoint 7 */ +#define MCF_IRQ_DMA 85 /* DMA Controller */ +#define MCF_IRQ_ERX 86 /* Ethernet Receiver */ +#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */ +#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */ +#define MCF_IRQ_QSPI 89 /* Queued Serial Interface */ +#define MCF_IRQ_EINT5 90 /* External Interrupt 5 */ +#define MCF_IRQ_EINT6 91 /* External Interrupt 6 */ +#define MCF_IRQ_SWTO 92 /* Software Watchdog */ +#define MCFINT_VECMAX 95 /* Maxmum interrupt */ +#define MCF_IRQ_TIMER MCF_IRQ_TIMER1 +#define MCF_IRQ_PROFILER MCF_IRQ_TIMER2 +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 48 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /****************************************************************************/ #endif /* m5272sim_h */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 95f4f8ee8f7..453356d72d8 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -54,6 +54,175 @@ #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ #endif + +#ifdef CONFIG_M5271 +#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) +#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) +#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002) +#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003) +#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004) +#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005) +#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006) +#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007) +#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008) +#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009) +#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A) +#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B) + +#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010) +#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011) +#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012) +#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013) +#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014) +#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015) +#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016) +#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017) +#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018) +#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019) +#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A) +#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B) + +#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020) +#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021) +#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022) +#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023) +#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024) +#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025) +#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026) +#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027) +#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028) +#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029) +#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A) +#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B) + +#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030) +#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031) +#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032) +#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033) +#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034) +#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035) +#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036) +#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037) +#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038) +#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039) +#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A) +#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B) + +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR + +#define MCFGPIO_PIN_MAX 100 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#endif + +#ifdef CONFIG_M5275 +#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004) +#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100005) +#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100008) +#define MCFGPIO_PODR_FEC0H (MCF_IPSBAR + 0x10000A) +#define MCFGPIO_PODR_FEC0L (MCF_IPSBAR + 0x10000B) +#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x10000C) +#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000D) +#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x10000E) +#define MCFGPIO_PODR_TIMERH (MCF_IPSBAR + 0x10000F) +#define MCFGPIO_PODR_TIMERL (MCF_IPSBAR + 0x100010) +#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100011) +#define MCFGPIO_PODR_FEC1H (MCF_IPSBAR + 0x100012) +#define MCFGPIO_PODR_FEC1L (MCF_IPSBAR + 0x100013) +#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100014) +#define MCFGPIO_PODR_IRQ (MCF_IPSBAR + 0x100015) +#define MCFGPIO_PODR_USBH (MCF_IPSBAR + 0x100016) +#define MCFGPIO_PODR_USBL (MCF_IPSBAR + 0x100017) +#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100018) + +#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100020) +#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100021) +#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100024) +#define MCFGPIO_PDDR_FEC0H (MCF_IPSBAR + 0x100026) +#define MCFGPIO_PDDR_FEC0L (MCF_IPSBAR + 0x100027) +#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100028) +#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x100029) +#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x10002A) +#define MCFGPIO_PDDR_TIMERH (MCF_IPSBAR + 0x10002B) +#define MCFGPIO_PDDR_TIMERL (MCF_IPSBAR + 0x10002C) +#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x10002D) +#define MCFGPIO_PDDR_FEC1H (MCF_IPSBAR + 0x10002E) +#define MCFGPIO_PDDR_FEC1L (MCF_IPSBAR + 0x10002F) +#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100030) +#define MCFGPIO_PDDR_IRQ (MCF_IPSBAR + 0x100031) +#define MCFGPIO_PDDR_USBH (MCF_IPSBAR + 0x100032) +#define MCFGPIO_PDDR_USBL (MCF_IPSBAR + 0x100033) +#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100034) + +#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x10003C) +#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x10003D) +#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100040) +#define MCFGPIO_PPDSDR_FEC0H (MCF_IPSBAR + 0x100042) +#define MCFGPIO_PPDSDR_FEC0L (MCF_IPSBAR + 0x100043) +#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100044) +#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x100045) +#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100046) +#define MCFGPIO_PPDSDR_TIMERH (MCF_IPSBAR + 0x100047) +#define MCFGPIO_PPDSDR_TIMERL (MCF_IPSBAR + 0x100048) +#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100049) +#define MCFGPIO_PPDSDR_FEC1H (MCF_IPSBAR + 0x10004A) +#define MCFGPIO_PPDSDR_FEC1L (MCF_IPSBAR + 0x10004B) +#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x10004C) +#define MCFGPIO_PPDSDR_IRQ (MCF_IPSBAR + 0x10004D) +#define MCFGPIO_PPDSDR_USBH (MCF_IPSBAR + 0x10004E) +#define MCFGPIO_PPDSDR_USBL (MCF_IPSBAR + 0x10004F) +#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100050) + +#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100058) +#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100059) +#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x10005C) +#define MCFGPIO_PCLRR_FEC0H (MCF_IPSBAR + 0x10005E) +#define MCFGPIO_PCLRR_FEC0L (MCF_IPSBAR + 0x10005F) +#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100060) +#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x100061) +#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100062) +#define MCFGPIO_PCLRR_TIMERH (MCF_IPSBAR + 0x100063) +#define MCFGPIO_PCLRR_TIMERL (MCF_IPSBAR + 0x100064) +#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100065) +#define MCFGPIO_PCLRR_FEC1H (MCF_IPSBAR + 0x100066) +#define MCFGPIO_PCLRR_FEC1L (MCF_IPSBAR + 0x100067) +#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100068) +#define MCFGPIO_PCLRR_IRQ (MCF_IPSBAR + 0x100069) +#define MCFGPIO_PCLRR_USBH (MCF_IPSBAR + 0x10006A) +#define MCFGPIO_PCLRR_USBL (MCF_IPSBAR + 0x10006B) +#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x10006C) + + +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL +#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL + +#define MCFGPIO_PIN_MAX 148 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#endif + +/* + * EPort + */ + +#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) +#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) + + /* * GPIO pins setups to enable the UARTs. */ diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index d79c49f8134..e2ad1f42b65 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -41,6 +41,157 @@ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ /* + * GPIO registers + */ +#define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000) +#define MCFGPIO_PORTB (MCF_IPSBAR + 0x00100001) +#define MCFGPIO_PORTC (MCF_IPSBAR + 0x00100002) +#define MCFGPIO_PORTD (MCF_IPSBAR + 0x00100003) +#define MCFGPIO_PORTE (MCF_IPSBAR + 0x00100004) +#define MCFGPIO_PORTF (MCF_IPSBAR + 0x00100005) +#define MCFGPIO_PORTG (MCF_IPSBAR + 0x00100006) +#define MCFGPIO_PORTH (MCF_IPSBAR + 0x00100007) +#define MCFGPIO_PORTJ (MCF_IPSBAR + 0x00100008) +#define MCFGPIO_PORTDD (MCF_IPSBAR + 0x00100009) +#define MCFGPIO_PORTEH (MCF_IPSBAR + 0x0010000A) +#define MCFGPIO_PORTEL (MCF_IPSBAR + 0x0010000B) +#define MCFGPIO_PORTAS (MCF_IPSBAR + 0x0010000C) +#define MCFGPIO_PORTQS (MCF_IPSBAR + 0x0010000D) +#define MCFGPIO_PORTSD (MCF_IPSBAR + 0x0010000E) +#define MCFGPIO_PORTTC (MCF_IPSBAR + 0x0010000F) +#define MCFGPIO_PORTTD (MCF_IPSBAR + 0x00100010) +#define MCFGPIO_PORTUA (MCF_IPSBAR + 0x00100011) + +#define MCFGPIO_DDRA (MCF_IPSBAR + 0x00100014) +#define MCFGPIO_DDRB (MCF_IPSBAR + 0x00100015) +#define MCFGPIO_DDRC (MCF_IPSBAR + 0x00100016) +#define MCFGPIO_DDRD (MCF_IPSBAR + 0x00100017) +#define MCFGPIO_DDRE (MCF_IPSBAR + 0x00100018) +#define MCFGPIO_DDRF (MCF_IPSBAR + 0x00100019) +#define MCFGPIO_DDRG (MCF_IPSBAR + 0x0010001A) +#define MCFGPIO_DDRH (MCF_IPSBAR + 0x0010001B) +#define MCFGPIO_DDRJ (MCF_IPSBAR + 0x0010001C) +#define MCFGPIO_DDRDD (MCF_IPSBAR + 0x0010001D) +#define MCFGPIO_DDREH (MCF_IPSBAR + 0x0010001E) +#define MCFGPIO_DDREL (MCF_IPSBAR + 0x0010001F) +#define MCFGPIO_DDRAS (MCF_IPSBAR + 0x00100020) +#define MCFGPIO_DDRQS (MCF_IPSBAR + 0x00100021) +#define MCFGPIO_DDRSD (MCF_IPSBAR + 0x00100022) +#define MCFGPIO_DDRTC (MCF_IPSBAR + 0x00100023) +#define MCFGPIO_DDRTD (MCF_IPSBAR + 0x00100024) +#define MCFGPIO_DDRUA (MCF_IPSBAR + 0x00100025) + +#define MCFGPIO_PORTAP (MCF_IPSBAR + 0x00100028) +#define MCFGPIO_PORTBP (MCF_IPSBAR + 0x00100029) +#define MCFGPIO_PORTCP (MCF_IPSBAR + 0x0010002A) +#define MCFGPIO_PORTDP (MCF_IPSBAR + 0x0010002B) +#define MCFGPIO_PORTEP (MCF_IPSBAR + 0x0010002C) +#define MCFGPIO_PORTFP (MCF_IPSBAR + 0x0010002D) +#define MCFGPIO_PORTGP (MCF_IPSBAR + 0x0010002E) +#define MCFGPIO_PORTHP (MCF_IPSBAR + 0x0010002F) +#define MCFGPIO_PORTJP (MCF_IPSBAR + 0x00100030) +#define MCFGPIO_PORTDDP (MCF_IPSBAR + 0x00100031) +#define MCFGPIO_PORTEHP (MCF_IPSBAR + 0x00100032) +#define MCFGPIO_PORTELP (MCF_IPSBAR + 0x00100033) +#define MCFGPIO_PORTASP (MCF_IPSBAR + 0x00100034) +#define MCFGPIO_PORTQSP (MCF_IPSBAR + 0x00100035) +#define MCFGPIO_PORTSDP (MCF_IPSBAR + 0x00100036) +#define MCFGPIO_PORTTCP (MCF_IPSBAR + 0x00100037) +#define MCFGPIO_PORTTDP (MCF_IPSBAR + 0x00100038) +#define MCFGPIO_PORTUAP (MCF_IPSBAR + 0x00100039) + +#define MCFGPIO_SETA (MCF_IPSBAR + 0x00100028) +#define MCFGPIO_SETB (MCF_IPSBAR + 0x00100029) +#define MCFGPIO_SETC (MCF_IPSBAR + 0x0010002A) +#define MCFGPIO_SETD (MCF_IPSBAR + 0x0010002B) +#define MCFGPIO_SETE (MCF_IPSBAR + 0x0010002C) +#define MCFGPIO_SETF (MCF_IPSBAR + 0x0010002D) +#define MCFGPIO_SETG (MCF_IPSBAR + 0x0010002E) +#define MCFGPIO_SETH (MCF_IPSBAR + 0x0010002F) +#define MCFGPIO_SETJ (MCF_IPSBAR + 0x00100030) +#define MCFGPIO_SETDD (MCF_IPSBAR + 0x00100031) +#define MCFGPIO_SETEH (MCF_IPSBAR + 0x00100032) +#define MCFGPIO_SETEL (MCF_IPSBAR + 0x00100033) +#define MCFGPIO_SETAS (MCF_IPSBAR + 0x00100034) +#define MCFGPIO_SETQS (MCF_IPSBAR + 0x00100035) +#define MCFGPIO_SETSD (MCF_IPSBAR + 0x00100036) +#define MCFGPIO_SETTC (MCF_IPSBAR + 0x00100037) +#define MCFGPIO_SETTD (MCF_IPSBAR + 0x00100038) +#define MCFGPIO_SETUA (MCF_IPSBAR + 0x00100039) + +#define MCFGPIO_CLRA (MCF_IPSBAR + 0x0010003C) +#define MCFGPIO_CLRB (MCF_IPSBAR + 0x0010003D) +#define MCFGPIO_CLRC (MCF_IPSBAR + 0x0010003E) +#define MCFGPIO_CLRD (MCF_IPSBAR + 0x0010003F) +#define MCFGPIO_CLRE (MCF_IPSBAR + 0x00100040) +#define MCFGPIO_CLRF (MCF_IPSBAR + 0x00100041) +#define MCFGPIO_CLRG (MCF_IPSBAR + 0x00100042) +#define MCFGPIO_CLRH (MCF_IPSBAR + 0x00100043) +#define MCFGPIO_CLRJ (MCF_IPSBAR + 0x00100044) +#define MCFGPIO_CLRDD (MCF_IPSBAR + 0x00100045) +#define MCFGPIO_CLREH (MCF_IPSBAR + 0x00100046) +#define MCFGPIO_CLREL (MCF_IPSBAR + 0x00100047) +#define MCFGPIO_CLRAS (MCF_IPSBAR + 0x00100048) +#define MCFGPIO_CLRQS (MCF_IPSBAR + 0x00100049) +#define MCFGPIO_CLRSD (MCF_IPSBAR + 0x0010004A) +#define MCFGPIO_CLRTC (MCF_IPSBAR + 0x0010004B) +#define MCFGPIO_CLRTD (MCF_IPSBAR + 0x0010004C) +#define MCFGPIO_CLRUA (MCF_IPSBAR + 0x0010004D) + +#define MCFGPIO_PBCDPAR (MCF_IPSBAR + 0x00100050) +#define MCFGPIO_PFPAR (MCF_IPSBAR + 0x00100051) +#define MCFGPIO_PEPAR (MCF_IPSBAR + 0x00100052) +#define MCFGPIO_PJPAR (MCF_IPSBAR + 0x00100054) +#define MCFGPIO_PSDPAR (MCF_IPSBAR + 0x00100055) +#define MCFGPIO_PASPAR (MCF_IPSBAR + 0x00100056) +#define MCFGPIO_PEHLPAR (MCF_IPSBAR + 0x00100058) +#define MCFGPIO_PQSPAR (MCF_IPSBAR + 0x00100059) +#define MCFGPIO_PTCPAR (MCF_IPSBAR + 0x0010005A) +#define MCFGPIO_PTDPAR (MCF_IPSBAR + 0x0010005B) +#define MCFGPIO_PUAPAR (MCF_IPSBAR + 0x0010005C) + +/* + * Edge Port registers + */ +#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x00130000) +#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x00130002) +#define MCFEPORT_EPIER (MCF_IPSBAR + 0x00130003) +#define MCFEPORT_EPDR (MCF_IPSBAR + 0x00130004) +#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x00130005) +#define MCFEPORT_EPFR (MCF_IPSBAR + 0x00130006) + +/* + * Queued ADC registers + */ +#define MCFQADC_PORTQA (MCF_IPSBAR + 0x00190006) +#define MCFQADC_PORTQB (MCF_IPSBAR + 0x00190007) +#define MCFQADC_DDRQA (MCF_IPSBAR + 0x00190008) +#define MCFQADC_DDRQB (MCF_IPSBAR + 0x00190009) + +/* + * General Purpose Timers registers + */ +#define MCFGPTA_GPTPORT (MCF_IPSBAR + 0x001A001D) +#define MCFGPTA_GPTDDR (MCF_IPSBAR + 0x001A001E) +#define MCFGPTB_GPTPORT (MCF_IPSBAR + 0x001B001D) +#define MCFGPTB_GPTDDR (MCF_IPSBAR + 0x001B001E) +/* + * + * definitions for generic gpio support + * + */ +#define MCFGPIO_PODR MCFGPIO_PORTA /* port output data */ +#define MCFGPIO_PDDR MCFGPIO_DDRA /* port data direction */ +#define MCFGPIO_PPDR MCFGPIO_PORTAP /* port pin data */ +#define MCFGPIO_SETR MCFGPIO_SETA /* set output */ +#define MCFGPIO_CLRR MCFGPIO_CLRA /* clr output */ + +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 180 + + +/* * Derek Cheung - 6 Feb 2005 * add I2C and QSPI register definition using Freescale's MCF5282 */ diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 5886728409c..c6830e5b54c 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -90,8 +90,15 @@ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x244) +#define MCFSIM_PADAT (MCF_MBAR + 0x248) + +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 16 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /* Definition offset address for CS2-7 -- old mask 5307 */ @@ -117,22 +124,6 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ -#if defined(CONFIG_M5307) -#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ -#endif - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - /* * Some symbol defines for the Parallel Port Pin Assignment Register @@ -149,6 +140,11 @@ #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* * Define the Cache register flags. diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index eb7fd444894..36bf15aec9a 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -56,47 +56,21 @@ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ -#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ - -#define MCFSIM_IMR_SIMR0 0xFC04801C -#define MCFSIM_IMR_SIMR1 0xFC04C01C -#define MCFSIM_IMR_CIMR0 0xFC04801D -#define MCFSIM_IMR_CIMR1 0xFC04C01D +#define MCFINTC0_SIMR 0xFC04801C +#define MCFINTC0_CIMR 0xFC04801D +#define MCFINTC0_ICR0 0xFC048040 +#define MCFINTC1_SIMR 0xFC04C01C +#define MCFINTC1_CIMR 0xFC04C01D +#define MCFINTC1_ICR0 0xFC04C040 #define MCFSIM_ICR_TIMER1 (0xFC048040+32) #define MCFSIM_ICR_TIMER2 (0xFC048040+33) - /* - * Macro to set IMR register. It is 32 bits on the 5307. + * Define system peripheral IRQ usage. */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -#define mcf_getiprl() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) - -#define mcf_getiprh() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) - - -#define mcf_enable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); - -#define mcf_enable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); - -#define mcf_disable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); - -#define mcf_disable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); +#define MCF_IRQ_TIMER (64 + 32) /* Timer0 */ +#define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */ /* * Define the Cache register flags. @@ -422,70 +396,70 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) -#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) -#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) -#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) -#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) -#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) -#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) -#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) -#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) -#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) -#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) -#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) -#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) -#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) -#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) -#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) -#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) -#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) -#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) -#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) -#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) -#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) -#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) -#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) -#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) -#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) -#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) -#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) -#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) -#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) -#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) -#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) -#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) -#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) -#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) -#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) -#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) -#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) -#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) -#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) -#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) -#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) -#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) -#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) -#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) -#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) -#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) -#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) -#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) -#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) -#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) -#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) -#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) -#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) -#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) -#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) -#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) -#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) -#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) -#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) -#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) -#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) -#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) -#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) +#define MCFGPIO_PODR_FECH (0xFC0A4000) +#define MCFGPIO_PODR_FECL (0xFC0A4001) +#define MCFGPIO_PODR_SSI (0xFC0A4002) +#define MCFGPIO_PODR_BUSCTL (0xFC0A4003) +#define MCFGPIO_PODR_BE (0xFC0A4004) +#define MCFGPIO_PODR_CS (0xFC0A4005) +#define MCFGPIO_PODR_PWM (0xFC0A4006) +#define MCFGPIO_PODR_FECI2C (0xFC0A4007) +#define MCFGPIO_PODR_UART (0xFC0A4009) +#define MCFGPIO_PODR_QSPI (0xFC0A400A) +#define MCFGPIO_PODR_TIMER (0xFC0A400B) +#define MCFGPIO_PODR_LCDDATAH (0xFC0A400D) +#define MCFGPIO_PODR_LCDDATAM (0xFC0A400E) +#define MCFGPIO_PODR_LCDDATAL (0xFC0A400F) +#define MCFGPIO_PODR_LCDCTLH (0xFC0A4010) +#define MCFGPIO_PODR_LCDCTLL (0xFC0A4011) +#define MCFGPIO_PDDR_FECH (0xFC0A4014) +#define MCFGPIO_PDDR_FECL (0xFC0A4015) +#define MCFGPIO_PDDR_SSI (0xFC0A4016) +#define MCFGPIO_PDDR_BUSCTL (0xFC0A4017) +#define MCFGPIO_PDDR_BE (0xFC0A4018) +#define MCFGPIO_PDDR_CS (0xFC0A4019) +#define MCFGPIO_PDDR_PWM (0xFC0A401A) +#define MCFGPIO_PDDR_FECI2C (0xFC0A401B) +#define MCFGPIO_PDDR_UART (0xFC0A401C) +#define MCFGPIO_PDDR_QSPI (0xFC0A401E) +#define MCFGPIO_PDDR_TIMER (0xFC0A401F) +#define MCFGPIO_PDDR_LCDDATAH (0xFC0A4021) +#define MCFGPIO_PDDR_LCDDATAM (0xFC0A4022) +#define MCFGPIO_PDDR_LCDDATAL (0xFC0A4023) +#define MCFGPIO_PDDR_LCDCTLH (0xFC0A4024) +#define MCFGPIO_PDDR_LCDCTLL (0xFC0A4025) +#define MCFGPIO_PPDSDR_FECH (0xFC0A4028) +#define MCFGPIO_PPDSDR_FECL (0xFC0A4029) +#define MCFGPIO_PPDSDR_SSI (0xFC0A402A) +#define MCFGPIO_PPDSDR_BUSCTL (0xFC0A402B) +#define MCFGPIO_PPDSDR_BE (0xFC0A402C) +#define MCFGPIO_PPDSDR_CS (0xFC0A402D) +#define MCFGPIO_PPDSDR_PWM (0xFC0A402E) +#define MCFGPIO_PPDSDR_FECI2C (0xFC0A402F) +#define MCFGPIO_PPDSDR_UART (0xFC0A4031) +#define MCFGPIO_PPDSDR_QSPI (0xFC0A4032) +#define MCFGPIO_PPDSDR_TIMER (0xFC0A4033) +#define MCFGPIO_PPDSDR_LCDDATAH (0xFC0A4035) +#define MCFGPIO_PPDSDR_LCDDATAM (0xFC0A4036) +#define MCFGPIO_PPDSDR_LCDDATAL (0xFC0A4037) +#define MCFGPIO_PPDSDR_LCDCTLH (0xFC0A4038) +#define MCFGPIO_PPDSDR_LCDCTLL (0xFC0A4039) +#define MCFGPIO_PCLRR_FECH (0xFC0A403C) +#define MCFGPIO_PCLRR_FECL (0xFC0A403D) +#define MCFGPIO_PCLRR_SSI (0xFC0A403E) +#define MCFGPIO_PCLRR_BUSCTL (0xFC0A403F) +#define MCFGPIO_PCLRR_BE (0xFC0A4040) +#define MCFGPIO_PCLRR_CS (0xFC0A4041) +#define MCFGPIO_PCLRR_PWM (0xFC0A4042) +#define MCFGPIO_PCLRR_FECI2C (0xFC0A4043) +#define MCFGPIO_PCLRR_UART (0xFC0A4045) +#define MCFGPIO_PCLRR_QSPI (0xFC0A4046) +#define MCFGPIO_PCLRR_TIMER (0xFC0A4047) +#define MCFGPIO_PCLRR_LCDDATAH (0xFC0A4049) +#define MCFGPIO_PCLRR_LCDDATAM (0xFC0A404A) +#define MCFGPIO_PCLRR_LCDDATAL (0xFC0A404B) +#define MCFGPIO_PCLRR_LCDCTLH (0xFC0A404C) +#define MCFGPIO_PCLRR_LCDCTLL (0xFC0A404D) #define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) #define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) #define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) @@ -1187,6 +1161,20 @@ /* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ #define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_FECH +#define MCFGPIO_PDDR MCFGPIO_PDDR_FECH +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_FECH +#define MCFGPIO_SETR MCFGPIO_PPDSDR_FECH +#define MCFGPIO_CLRR MCFGPIO_PCLRR_FECH + +#define MCFGPIO_PIN_MAX 136 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + + /********************************************************************* * * Interrupt Controller (INTC) @@ -2154,12 +2142,12 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) -#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) -#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) -#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) -#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) -#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) +#define MCFEPORT_EPPAR (0xFC094000) +#define MCFEPORT_EPDDR (0xFC094002) +#define MCFEPORT_EPIER (0xFC094003) +#define MCFEPORT_EPDR (0xFC094004) +#define MCFEPORT_EPPDR (0xFC094005) +#define MCFEPORT_EPFR (0xFC094006) /* Bit definitions and macros for MCF_EPORT_EPPAR */ #define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index cc22c4a5300..c399abbf953 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -73,9 +73,15 @@ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x244) +#define MCFSIM_PADAT (MCF_MBAR + 0x248) +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 16 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /* * Some symbol defines for the above... @@ -91,19 +97,6 @@ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ /* - * Macro to set IMR register. It is 32 bits on the 5407. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* * Some symbol defines for the Parallel Port Pin Assignment Register */ #define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ @@ -118,6 +111,11 @@ #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* * Define the Cache register flags. diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h index ddfab96403c..5e9249b0014 100644 --- a/arch/m68k/include/asm/math-emu.h +++ b/arch/m68k/include/asm/math-emu.h @@ -145,16 +145,16 @@ extern unsigned int fp_debugprint; * these are only used during instruction decoding * where we always know how deep we're on the stack. */ -#define FPS_DO (PT_D0) -#define FPS_D1 (PT_D1) -#define FPS_D2 (PT_D2) -#define FPS_A0 (PT_A0) -#define FPS_A1 (PT_A1) -#define FPS_A2 (PT_A2) -#define FPS_SR (PT_SR) -#define FPS_PC (PT_PC) -#define FPS_EA (PT_PC+6) -#define FPS_PC2 (PT_PC+10) +#define FPS_DO (PT_OFF_D0) +#define FPS_D1 (PT_OFF_D1) +#define FPS_D2 (PT_OFF_D2) +#define FPS_A0 (PT_OFF_A0) +#define FPS_A1 (PT_OFF_A1) +#define FPS_A2 (PT_OFF_A2) +#define FPS_SR (PT_OFF_SR) +#define FPS_PC (PT_OFF_PC) +#define FPS_EA (PT_OFF_PC+6) +#define FPS_PC2 (PT_OFF_PC+10) .macro fp_get_fp_reg lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h new file mode 100644 index 00000000000..ee5e4ccce89 --- /dev/null +++ b/arch/m68k/include/asm/mcfgpio.h @@ -0,0 +1,40 @@ +/* + * Coldfire generic GPIO support. + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef mcfgpio_h +#define mcfgpio_h + +#include <linux/io.h> +#include <asm-generic/gpio.h> + +struct mcf_gpio_chip { + struct gpio_chip gpio_chip; + void __iomem *pddr; + void __iomem *podr; + void __iomem *ppdr; + void __iomem *setr; + void __iomem *clrr; + const u8 *gpio_to_pinmux; +}; + +int mcf_gpio_direction_input(struct gpio_chip *, unsigned); +int mcf_gpio_get_value(struct gpio_chip *, unsigned); +int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int); +void mcf_gpio_set_value(struct gpio_chip *, unsigned, int); +void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int); +int mcf_gpio_request(struct gpio_chip *, unsigned); +void mcf_gpio_free(struct gpio_chip *, unsigned); + +#endif diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h new file mode 100644 index 00000000000..4183320a381 --- /dev/null +++ b/arch/m68k/include/asm/mcfintc.h @@ -0,0 +1,89 @@ +/****************************************************************************/ + +/* + * mcfintc.h -- support definitions for the simple ColdFire + * Interrupt Controller + * + * (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org> + */ + +/****************************************************************************/ +#ifndef mcfintc_h +#define mcfintc_h +/****************************************************************************/ + +/* + * Most of the older ColdFire parts use the same simple interrupt + * controller. This is currently used on the 5206, 5206e, 5249, 5307 + * and 5407 parts. + * + * The builtin peripherals are masked through dedicated bits in the + * Interrupt Mask register (IMR) - and this is not indexed (or in any way + * related to) the actual interrupt number they use. So knowing the IRQ + * number doesn't explicitly map to a certain internal device for + * interrupt control purposes. + */ + +/* + * Bit definitions for the ICR family of registers. + */ +#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ +#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ +#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ +#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ +#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ +#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ +#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ +#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ +#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ + +#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ +#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ +#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ +#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ + +/* + * IMR bit position definitions. Not all ColdFire parts with this interrupt + * controller actually support all of these interrupt sources. But the bit + * numbers are the same in all cores. + */ +#define MCFINTC_EINT1 1 /* External int #1 */ +#define MCFINTC_EINT2 2 /* External int #2 */ +#define MCFINTC_EINT3 3 /* External int #3 */ +#define MCFINTC_EINT4 4 /* External int #4 */ +#define MCFINTC_EINT5 5 /* External int #5 */ +#define MCFINTC_EINT6 6 /* External int #6 */ +#define MCFINTC_EINT7 7 /* External int #7 */ +#define MCFINTC_SWT 8 /* Software Watchdog */ +#define MCFINTC_TIMER1 9 +#define MCFINTC_TIMER2 10 +#define MCFINTC_I2C 11 /* I2C / MBUS */ +#define MCFINTC_UART0 12 +#define MCFINTC_UART1 13 +#define MCFINTC_DMA0 14 +#define MCFINTC_DMA1 15 +#define MCFINTC_DMA2 16 +#define MCFINTC_DMA3 17 +#define MCFINTC_QSPI 18 + +#ifndef __ASSEMBLER__ + +/* + * There is no one-is-one correspondance between the interrupt number (irq) + * and the bit fields on the mask register. So we create a per-cpu type + * mapping of irq to mask bit. The CPU platform code needs to register + * its supported irq's at init time, using this function. + */ +extern unsigned char mcf_irq2imr[]; +static inline void mcf_mapirq2imr(int irq, int imr) +{ + mcf_irq2imr[irq] = imr; +} + +void mcf_autovector(int irq); +void mcf_setimr(int index); +void mcf_clrimr(int index); +#endif + +/****************************************************************************/ +#endif /* mcfintc_h */ diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h index 431f63aadd0..bf638be0958 100644 --- a/arch/m68k/include/asm/mcfne.h +++ b/arch/m68k/include/asm/mcfne.h @@ -239,87 +239,4 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) #endif /* NE2000_OFFOFFSET */ /****************************************************************************/ - -#ifdef COLDFIRE_NE2000_FUNCS - -/* - * Lastly the interrupt set up code... - * Minor differences between the different board types. - */ - -#if defined(CONFIG_ARN5206) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206eC3) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - mcf_autovector(irq); -} -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - volatile unsigned long *icrp; - volatile unsigned long *pitr; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77077777) | 0x00d00000; - - pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); - *pitr = *pitr | 0x20000000; -} - -void ne2000_irqack(int irq) -{ - volatile unsigned long *icrp; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77777777) | 0x00800000; -} -#endif - -#if defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); - mcf_autovector(irq); -} - -#else - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); -} - -#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ -#endif /* CONFIG_M5307 || CONFIG_M5407 */ - -#endif /* COLDFIRE_NE2000_FUNCS */ - -/****************************************************************************/ #endif /* mcfne_h */ diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h index da3f2ceff3a..9c70a67bf85 100644 --- a/arch/m68k/include/asm/mcfsim.h +++ b/arch/m68k/include/asm/mcfsim.h @@ -4,7 +4,7 @@ * mcfsim.h -- ColdFire System Integration Module support. * * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) */ /****************************************************************************/ @@ -12,19 +12,21 @@ #define mcfsim_h /****************************************************************************/ - /* - * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, - * 5307 or 5407 specific addresses. + * Include the appropriate ColdFire CPU specific System Integration Module + * (SIM) definitions. */ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) #include <asm/m5206sim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M520x) #include <asm/m520xsim.h> #elif defined(CONFIG_M523x) #include <asm/m523xsim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M5249) #include <asm/m5249sim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M527x) #include <asm/m527xsim.h> #elif defined(CONFIG_M5272) @@ -33,94 +35,13 @@ #include <asm/m528xsim.h> #elif defined(CONFIG_M5307) #include <asm/m5307sim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M532x) #include <asm/m532xsim.h> #elif defined(CONFIG_M5407) #include <asm/m5407sim.h> +#include <asm/mcfintc.h> #endif - -/* - * Define the base address of the SIM within the MBAR address space. - */ -#define MCFSIM_BASE 0x0 /* Base address of SIM */ - - -/* - * Bit definitions for the ICR family of registers. - */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - -/* - * Bit definitions for the Interrupt Mask register (IMR). - */ -#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ -#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ -#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ -#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ -#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ -#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ -#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ - -#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ -#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ -#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ -#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ -#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ -#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) -#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ -#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ -#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ -#endif - -/* - * Mask for all of the SIM devices. Some parts have more or less - * SIM devices. This is a catchall for the sandard set. - */ -#ifndef MCFSIM_IMR_MASKALL -#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ -#endif - - -/* - * PIT interrupt settings, if not found in mXXXXsim.h file. - */ -#ifndef ICR_INTRCONF -#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ -#endif -#ifndef MCFPIT_IMR -#define MCFPIT_IMR MCFINTC_IMRH -#endif -#ifndef MCFPIT_IMR_IBIT -#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) -#endif - - -#ifndef __ASSEMBLY__ -/* - * Definition for the interrupt auto-vectoring support. - */ -extern void mcf_autovector(unsigned int vec); -#endif /* __ASSEMBLY__ */ - /****************************************************************************/ #endif /* mcfsim_h */ diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h index 2d7a4dbd968..527bea5d678 100644 --- a/arch/m68k/include/asm/mcfsmc.h +++ b/arch/m68k/include/asm/mcfsmc.h @@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr) static int once = 0; extern unsigned short ppdata; if (once++ == 0) { - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; + *((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec; ppdata |= 0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + *((volatile unsigned short *)MCFSIM_PADAT) = ppdata; outw(0x0001, ioaddr + BANK_SELECT); outw(0x0001, ioaddr + BANK_SELECT); outw(0x0067, ioaddr + BASE); ppdata &= ~0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + *((volatile unsigned short *)MCFSIM_PADAT) = ppdata; } *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h index 9f5c4c4b3c7..8eebf89f5ab 100644 --- a/arch/m68k/include/asm/mman.h +++ b/arch/m68k/include/asm/mman.h @@ -1,17 +1 @@ -#ifndef __M68K_MMAN_H__ -#define __M68K_MMAN_H__ - -#include <asm-generic/mman-common.h> - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __M68K_MMAN_H__ */ +#include <asm-generic/mman.h> diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h index 0299f6a2dee..4dec2d9fb99 100644 --- a/arch/m68k/include/asm/nettel.h +++ b/arch/m68k/include/asm/nettel.h @@ -48,14 +48,14 @@ extern volatile unsigned short ppdata; static __inline__ unsigned int mcf_getppdata(void) { volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + pp = (volatile unsigned short *) MCFSIM_PADAT; return((unsigned int) *pp); } static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) { volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + pp = (volatile unsigned short *) MCFSIM_PADAT; ppdata = (ppdata & ~mask) | bits; *pp = ppdata; } diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h index 9aa3f90f485..1f31b060cc8 100644 --- a/arch/m68k/include/asm/page_no.h +++ b/arch/m68k/include/asm/page_no.h @@ -1,10 +1,12 @@ #ifndef _M68KNOMMU_PAGE_H #define _M68KNOMMU_PAGE_H +#include <linux/const.h> + /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #include <asm/setup.h> diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h new file mode 100644 index 00000000000..119ee686dbd --- /dev/null +++ b/arch/m68k/include/asm/pinmux.h @@ -0,0 +1,30 @@ +/* + * Coldfire generic GPIO pinmux support. + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef pinmux_h +#define pinmux_h + +#define MCFPINMUX_NONE -1 + +extern int mcf_pinmux_request(unsigned, unsigned); +extern void mcf_pinmux_release(unsigned, unsigned); + +static inline int mcf_pinmux_is_valid(unsigned pinmux) +{ + return pinmux != MCFPINMUX_NONE; +} + +#endif + diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index fc3f2c22f2b..74fd674b15a 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -1,5 +1,170 @@ -#ifdef __uClinux__ -#include "processor_no.h" +/* + * include/asm-m68k/processor.h + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#ifndef __ASM_M68K_PROCESSOR_H +#define __ASM_M68K_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <linux/thread_info.h> +#include <asm/segment.h> +#include <asm/fpu.h> +#include <asm/ptrace.h> + +static inline unsigned long rdusp(void) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + return sw_usp; #else -#include "processor_mm.h" + unsigned long usp; + __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); + return usp; +#endif +} + +static inline void wrusp(unsigned long usp) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + sw_usp = usp; +#else + __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); +#endif +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#ifndef CONFIG_SUN3 +#define TASK_SIZE (0xF0000000UL) +#else +#define TASK_SIZE (0x0E000000UL) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#ifdef CONFIG_MMU +#ifndef CONFIG_SUN3 +#define TASK_UNMAPPED_BASE 0xC0000000UL +#else +#define TASK_UNMAPPED_BASE 0x0A000000UL +#endif +#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) +#else +#define TASK_UNMAPPED_BASE 0 +#endif + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short sr; /* saved status register */ + unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned long crp[2]; /* cpu root pointer */ + unsigned long esp0; /* points to SR of stack frame */ + unsigned long faddr; /* info about last fault */ + int signo, code; + unsigned long fp[8*3]; + unsigned long fpcntl[3]; /* fp control regs */ + unsigned char fpstate[FPSTATESIZE]; /* floating point state */ + struct thread_info info; +}; + +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ + .sr = PS_S, \ + .fs = __KERNEL_DS, \ + .info = INIT_THREAD_INFO(init_task), \ +} + +#ifdef CONFIG_MMU +/* + * Do necessary setup to start up a newly executed thread. + */ +static inline void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long usp) +{ + /* reads from user space */ + set_fs(USER_DS); + + regs->pc = pc; + regs->sr &= ~0x2000; + wrusp(usp); +} + +#else + +/* + * Coldfire stacks need to be re-aligned on trap exit, conventional + * 68k can handle this case cleanly. + */ +#ifdef CONFIG_COLDFIRE +#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) +#else +#define reformat(_regs) do { } while (0) +#endif + +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + ((struct switch_stack *)(_regs))[-1].a6 = 0; \ + reformat(_regs); \ + if (current->mm) \ + (_regs)->d5 = current->mm->start_data; \ + (_regs)->sr &= ~0x2000; \ + wrusp(_usp); \ +} while(0) + +#endif + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + (virt_addr_valid((tsk)->thread.esp0))) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + #endif diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h deleted file mode 100644 index 1f61ef53f0e..00000000000 --- a/arch/m68k/include/asm/processor_mm.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * include/asm-m68k/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/thread_info.h> -#include <asm/segment.h> -#include <asm/fpu.h> -#include <asm/ptrace.h> - -static inline unsigned long rdusp(void) -{ - unsigned long usp; - - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -} - -static inline void wrusp(unsigned long usp) -{ - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#ifndef CONFIG_SUN3 -#define TASK_SIZE (0xF0000000UL) -#else -#define TASK_SIZE (0x0E000000UL) -#endif - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP -#endif - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#ifndef CONFIG_SUN3 -#define TASK_UNMAPPED_BASE 0xC0000000UL -#else -#define TASK_UNMAPPED_BASE 0x0A000000UL -#endif -#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long faddr; /* info about last fault */ - int signo, code; - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ - struct thread_info info; -}; - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ - .sr = PS_S, \ - .fs = __KERNEL_DS, \ - .info = INIT_THREAD_INFO(init_task), \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -static inline void start_thread(struct pt_regs * regs, unsigned long pc, - unsigned long usp) -{ - /* reads from user space */ - set_fs(USER_DS); - - regs->pc = pc; - regs->sr &= ~0x2000; - wrusp(usp); -} - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h deleted file mode 100644 index 7a1e0ba35f5..00000000000 --- a/arch/m68k/include/asm/processor_no.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * include/asm-m68knommu/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/compiler.h> -#include <linux/threads.h> -#include <asm/types.h> -#include <asm/segment.h> -#include <asm/fpu.h> -#include <asm/ptrace.h> -#include <asm/current.h> - -static inline unsigned long rdusp(void) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - return(sw_usp); -#else - unsigned long usp; - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -#endif -} - -static inline void wrusp(unsigned long usp) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - sw_usp = usp; -#else - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -#endif -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#define TASK_SIZE (0xF0000000UL) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. We won't be using it - */ -#define TASK_UNMAPPED_BASE 0 - -/* - * if you change this structure, you must change the code and offsets - * in m68k/machasm.S - */ - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ -}; - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ - .sr = PS_S, \ - .fs = __KERNEL_DS, \ -} - -/* - * Coldfire stacks need to be re-aligned on trap exit, conventional - * 68k can handle this case cleanly. - */ -#if defined(CONFIG_COLDFIRE) -#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) -#else -#define reformat(_regs) do { } while (0) -#endif - -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - (_regs)->pc = (_pc); \ - ((struct switch_stack *)(_regs))[-1].a6 = 0; \ - reformat(_regs); \ - if (current->mm) \ - (_regs)->d5 = current->mm->start_data; \ - (_regs)->sr &= ~0x2000; \ - wrusp(_usp); \ -} while(0) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -unsigned long thread_saved_pc(struct task_struct *tsk); -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h index ca87f938b03..eee01cce921 100644 --- a/arch/m68k/include/asm/socket.h +++ b/arch/m68k/include/asm/socket.h @@ -57,4 +57,7 @@ #define SO_TIMESTAMPING 37 #define SCM_TIMESTAMPING SO_TIMESTAMPING +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + #endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h index 6ea5c33b3c5..b6da3882be9 100644 --- a/arch/m68k/include/asm/thread_info_mm.h +++ b/arch/m68k/include/asm/thread_info_mm.h @@ -1,6 +1,10 @@ #ifndef _ASM_M68K_THREAD_INFO_H #define _ASM_M68K_THREAD_INFO_H +#ifndef ASM_OFFSETS_C +#include <asm/asm-offsets.h> +#endif +#include <asm/current.h> #include <asm/types.h> #include <asm/page.h> @@ -31,7 +35,12 @@ struct thread_info { #define init_thread_info (init_task.thread.info) #define init_stack (init_thread_union.stack) -#define task_thread_info(tsk) (&(tsk)->thread.info) +#ifdef ASM_OFFSETS_C +#define task_thread_info(tsk) ((struct thread_info *) NULL) +#else +#define task_thread_info(tsk) ((struct thread_info *)((char *)tsk+TASK_TINFO)) +#endif + #define task_stack_page(tsk) ((tsk)->stack) #define current_thread_info() task_thread_info(current) diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h index b87f2f278f6..6759dad954f 100644 --- a/arch/m68k/include/asm/timex.h +++ b/arch/m68k/include/asm/timex.h @@ -3,10 +3,23 @@ * * m68k architecture timex specifications */ -#ifndef _ASMm68k_TIMEX_H -#define _ASMm68k_TIMEX_H +#ifndef _ASMm68K_TIMEX_H +#define _ASMm68K_TIMEX_H +#ifdef CONFIG_COLDFIRE +/* + * CLOCK_TICK_RATE should give the underlying frequency of the tick timer + * to make ntp work best. For Coldfires, that's the main clock. + */ +#include <asm/coldfire.h> +#define CLOCK_TICK_RATE MCF_CLK +#else +/* + * This default CLOCK_TICK_RATE is probably wrong for many 68k boards + * Users of those boards will need to check and modify accordingly + */ #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#endif typedef unsigned long cycles_t; diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 946d8691f2b..48b87f5ced5 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -335,7 +335,7 @@ #define __NR_preadv 329 #define __NR_pwritev 330 #define __NR_rt_tgsigqueueinfo 331 -#define __NR_perf_counter_open 332 +#define __NR_perf_event_open 332 #ifdef __KERNEL__ |