diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 220 |
1 files changed, 61 insertions, 159 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5a7c5d9636..cd5fbf6f078 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -3,6 +3,7 @@ config MIPS default y select HAVE_IDE select HAVE_OPROFILE + select HAVE_ARCH_KGDB # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB @@ -34,7 +35,6 @@ config BASLER_EXCITE select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG. @@ -181,38 +181,6 @@ config LEMOTE_FULONG Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and an FPGA northbridge -config MIPS_ATLAS - bool "MIPS Atlas board" - select BOOT_ELF32 - select BOOT_RAW - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select IRQ_CPU - select HW_HAS_PCI - select MIPS_BOARDS_GEN - select MIPS_BONITO64 - select PCI_GT64XXX_PCI0 - select MIPS_MSC - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_HAS_CPU_NEVADA - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL - select SYS_SUPPORTS_SMARTMIPS - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This enables support for the MIPS Technologies Atlas evaluation - board. - config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC @@ -243,32 +211,13 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help This enables support for the MIPS Technologies Malta evaluation board. -config MIPS_SEAD - bool "MIPS SEAD board" - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select MIPS_BOARDS_GEN - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_SMARTMIPS - help - This enables support for the MIPS Technologies SEAD evaluation - board. - config MIPS_SIM bool 'MIPS simulator (MIPSsim)' select CEVT_R4K @@ -332,7 +281,6 @@ config PMC_MSP select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select IRQ_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE @@ -358,7 +306,6 @@ config PMC_YOSEMITE select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -382,6 +329,7 @@ config SGI_IP22 select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 select SGI_HAS_SEEQ select SGI_HAS_WD93 select SGI_HAS_ZILOG @@ -410,7 +358,6 @@ config SGI_IP27 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -437,6 +384,7 @@ config SGI_IP28 select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 select SGI_HAS_SEEQ select SGI_HAS_WD93 select SGI_HAS_ZILOG @@ -525,7 +473,6 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN select ZONE_DMA32 if 64BIT @@ -602,65 +549,29 @@ config SNI_RM Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. -config TOSHIBA_JMR3927 - bool "Toshiba JMR-TX3927 board" - select CEVT_TXX9 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_TX3927 - select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 +config MACH_TX39XX + bool "Toshiba TX39 series based machines" -config TOSHIBA_RBTX4927 - bool "Toshiba RBTX49[23]7 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select I8259 if TOSHIBA_FPCIB0 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This Toshiba board is based on the TX4927 processor. Say Y here to - support this machine type +config MACH_TX49XX + bool "Toshiba TX49 series based machines" -config TOSHIBA_RBTX4938 - bool "Toshiba RBTX4938 board" +config MIKROTIK_RB532 + bool "Mikrotik RB532 boards" select CEVT_R4K select CSRC_R4K - select CEVT_TXX9 select DMA_NONCOHERENT - select HAS_TXX9_SERIAL + select GENERIC_HARDIRQS_NO__DO_IRQ select HW_HAS_PCI select IRQ_CPU - select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX + select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 + select SWAP_IO_SPACE + select BOOT_RAW + select ARCH_REQUIRE_GPIOLIB help - This Toshiba board is based on the TX4938 processor. Say Y here to - support this machine type + Support the Mikrotik(tm) RouterBoard 532 series, + based on the IDT RC32434 SoC. config WR_PPMC bool "Wind River PPMC board" @@ -687,24 +598,18 @@ config WR_PPMC endchoice -source "arch/mips/au1000/Kconfig" +source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" -source "arch/mips/tx4927/Kconfig" -source "arch/mips/tx4938/Kconfig" +source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" endmenu -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -800,7 +705,7 @@ config CSRC_SB1250 config GPIO_TXX9 select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB bool config CFE @@ -939,10 +844,6 @@ config PCI_GT64XXX_PCI0 config NO_EXCEPT_FILL bool -config MIPS_TX3927 - bool - select HAS_TXX9_SERIAL - config MIPS_RM9122 bool select SERIAL_RM9000 @@ -959,7 +860,6 @@ config SOC_PNX8550 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ - select SYS_SUPPORTS_KGDB select GENERIC_GPIO config SWAP_IO_SPACE @@ -979,6 +879,9 @@ config SGI_HAS_DS1286 config SGI_HAS_INDYDOG bool +config SGI_HAS_HAL2 + bool + config SGI_HAS_SEEQ bool @@ -1005,8 +908,8 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SGI_IP28 || SNI_RM + default "4" if MACH_DECSTATION || MIKROTIK_RB532 + default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM default "4" if PMC_MSP4200_EVAL default "5" @@ -1365,6 +1268,13 @@ config CPU_SUPPORTS_32BIT_KERNEL config CPU_SUPPORTS_64BIT_KERNEL bool +# +# Set to y for ptrace access to watch registers. +# +config HARDWARE_WATCHPOINTS + bool + default y if CPU_MIPS32 || CPU_MIPS64 + menu "Kernel type" choice @@ -1496,7 +1406,6 @@ config MIPS_MT_SMTC depends on CPU_MIPS32_R2 #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING - select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT @@ -1544,32 +1453,17 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_MT_SMTC_INSTANT_REPLAY - bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC && !PREEMPT - default y - help - SMTC pseudo-interrupts between TCs are deferred and queued - if the target TC is interrupt-inhibited (IXMT). In the first - SMTC prototypes, these queued IPIs were serviced on return - to user mode, or on entry into the kernel idle loop. The - INSTANT_REPLAY option dispatches them as part of local_irq_restore() - processing, which adds runtime overhead (hence the option to turn - it off), but ensures that IPIs are handled promptly even under - heavy I/O interrupt load. - config MIPS_MT_SMTC_IM_BACKSTOP bool "Use per-TC register bits as backstop for inhibited IM bits" depends on MIPS_MT_SMTC - default y + default n help To support multiple TC microthreads acting as "CPUs" within a VPE, VPE-wide interrupt mask bits must be specially manipulated during interrupt handling. To support legacy drivers and interrupt controller management code, SMTC has a "backstop" to track and if necessary restore the interrupt mask. This has some performance - impact on interrupt service overhead. Disable it only if you know - what you are doing. + impact on interrupt service overhead. config MIPS_MT_SMTC_IRQAFF bool "Support IRQ affinity API" @@ -1579,10 +1473,8 @@ config MIPS_MT_SMTC_IRQAFF Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) for SMTC Linux kernel. Requires platform support, of which an example can be found in the MIPS kernel i8259 and Malta - platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY - be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to - interrupt dispatch, and should be used only if you know what - you are doing. + platform code. Adds some overhead to interrupt dispatch, and + should be used only if you know what you are doing. config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" @@ -1610,6 +1502,18 @@ config MIPS_APSP_KSPD "exit" syscall notifying other kernel modules the SP program is exiting. You probably want to say yes here. +config MIPS_CMP + bool "MIPS CMP framework support" + depends on SYS_SUPPORTS_MIPS_CMP + select SYNC_R4K if BROKEN + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_SCHED_SMT if SMP + select WEAK_ORDERING + default n + help + This is a placeholder option for the GCMP work. It will need to + be handled differently... + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 @@ -1763,6 +1667,7 @@ config SMP bool "Multi-Processing support" depends on SYS_SUPPORTS_SMP select IRQ_PER_CPU + select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1785,6 +1690,9 @@ config SMP config SMP_UP bool +config SYS_SUPPORTS_MIPS_CMP + bool + config SYS_SUPPORTS_SMP bool @@ -1832,17 +1740,6 @@ config NR_CPUS performance should round up your number of processors to the next power of two. -config MIPS_CMP - bool "MIPS CMP framework support" - depends on SMP - select SYNC_R4K - select SYS_SUPPORTS_SCHED_SMT - select WEAK_ORDERING - default n - help - This is a placeholder option for the GCMP work. It will need to - be handled differently... - source "kernel/time/Kconfig" # @@ -1978,6 +1875,15 @@ config STACKTRACE_SUPPORT source "init/Kconfig" +config PROBE_INITRD_HEADER + bool "Probe initrd header created by addinitrd" + depends on BLK_DEV_INITRD + help + Probe initrd header at the last page of kernel image. + Say Y here if you are using arch/mips/boot/addinitrd.c to + add initrd or initramfs image to the kernel image. + Otherwise, say N. + menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_EISA @@ -2064,10 +1970,6 @@ source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool -config BINFMT_IRIX - bool "Include IRIX binary compatibility" - depends on CPU_BIG_ENDIAN && 32BIT && BROKEN - config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" depends on 64BIT |