diff options
Diffstat (limited to 'arch/mips/ddb5xxx')
| -rw-r--r-- | arch/mips/ddb5xxx/common/prom.c | 8 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5074/Makefile | 8 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5074/irq.c | 169 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5074/nile4_pic.c | 286 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5074/setup.c | 234 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5476/Makefile | 9 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5476/dbg_io.c | 136 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5476/irq.c | 165 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5476/nile4_pic.c | 190 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5476/setup.c | 296 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c | 109 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5477/setup.c | 2 |
12 files changed, 2 insertions, 1610 deletions
diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c index b8d1f7489f3..00c62c1c28a 100644 --- a/arch/mips/ddb5xxx/common/prom.c +++ b/arch/mips/ddb5xxx/common/prom.c @@ -56,13 +56,7 @@ void __init prom_init(void) mips_machgroup = MACH_GROUP_NEC_DDB; -#if defined(CONFIG_DDB5074) - mips_machtype = MACH_NEC_DDB5074; - add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM); -#elif defined(CONFIG_DDB5476) - mips_machtype = MACH_NEC_DDB5476; - add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM); -#elif defined(CONFIG_DDB5477) +#if defined(CONFIG_DDB5477) ddb5477_runtime_detection(); add_memory_region(0, board_ram_size, BOOT_MEM_RAM); #endif diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile deleted file mode 100644 index 304c02107b4..00000000000 --- a/arch/mips/ddb5xxx/ddb5074/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the NEC DDB Vrc-5074 specific kernel interface routines -# under Linux. -# - -obj-y += setup.o irq.o nile4_pic.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c deleted file mode 100644 index 60c087b7738..00000000000 --- a/arch/mips/ddb5xxx/ddb5074/irq.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> - -#include <asm/i8259.h> -#include <asm/io.h> -#include <asm/irq_cpu.h> -#include <asm/ptrace.h> -#include <asm/nile4.h> -#include <asm/ddb5xxx/ddb5xxx.h> -#include <asm/ddb5xxx/ddb5074.h> - - -static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; - -#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ -#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */ -#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */ - -#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */ -#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */ -#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */ - -#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */ -#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */ - -#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */ -#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */ - -#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */ -#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */ - - -static void m1543_irq_setup(void) -{ - /* - * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all - * the possible IO sources in the M1543 are in use by us. We will - * use the following mapping: - * - * IRQ1 - keyboard (default set by M1543) - * IRQ3 - reserved for UART B (default set by M1543) (note that - * the schematics for the DDB Vrc-5074 board seem to - * indicate that IRQ3 is connected to the DS1386 - * watchdog timer interrupt output so we might have - * a conflict) - * IRQ4 - reserved for UART A (default set by M1543) - * IRQ5 - parallel (default set by M1543) - * IRQ8 - DS1386 time of day (RTC) interrupt - * IRQ12 - mouse - */ - - /* - * Assing mouse interrupt to IRQ12 - */ - - /* Enter configuration mode */ - outb(0x51, M1543_PNP_CONFIG); - outb(0x23, M1543_PNP_CONFIG); - - /* Select logical device 7 (Keyboard) */ - outb(0x07, M1543_PNP_INDEX); - outb(0x07, M1543_PNP_DATA); - - /* Select IRQ12 */ - outb(0x72, M1543_PNP_INDEX); - outb(0x0c, M1543_PNP_DATA); - - outb(0x30, M1543_PNP_INDEX); - printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA)); - - outb(0x70, M1543_PNP_INDEX); - printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA)); - - /* Leave configration mode */ - outb(0xbb, M1543_PNP_CONFIG); - - -} - -static void ddb_local0_irqdispatch(struct pt_regs *regs) -{ - u32 mask; - int nile4_irq; - - mask = nile4_get_irq_stat(0); - - /* Handle the timer interrupt first */ -#if 0 - if (mask & (1 << NILE4_INT_GPT)) { - do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs); - mask &= ~(1 << NILE4_INT_GPT); - } -#endif - for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1) - if (mask & 1) { - if (nile4_irq == NILE4_INT_INTE) { - int i8259_irq; - - nile4_clear_irq(NILE4_INT_INTE); - i8259_irq = nile4_i8259_iack(); - do_IRQ(i8259_irq, regs); - } else - do_IRQ(nile4_to_irq(nile4_irq), regs); - - } -} - -static void ddb_local1_irqdispatch(void) -{ - printk("ddb_local1_irqdispatch called\n"); -} - -static void ddb_buserror_irq(void) -{ - printk("ddb_buserror_irq called\n"); -} - -static void ddb_8254timer_irq(void) -{ - printk("ddb_8254timer_irq called\n"); -} - -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & CAUSEF_IP2) - ddb_local0_irqdispatch(regs); - else if (pending & CAUSEF_IP3) - ddb_local1_irqdispatch(); - else if (pending & CAUSEF_IP6) - ddb_buserror_irq(); - else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) - ddb_8254timer_irq(); -} - -void __init arch_init_irq(void) -{ - /* setup cascade interrupts */ - setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); - setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); - - nile4_irq_setup(NILE4_IRQ_BASE); - m1543_irq_setup(); - init_i8259_irqs(); - - - printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE); - - mips_cpu_irq_init(CPU_IRQ_BASE); - - printk("enabling 8259 cascade\n"); - - ddb5074_led_hex(0); - - /* Enable the interrupt cascade */ - nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE); -} diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c deleted file mode 100644 index 8743ffce865..00000000000 --- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * arch/mips/ddb5476/nile4.c -- - * low-level PIC code for NEC Vrc-5476 (Nile 4) - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - */ -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> - -#include <asm/addrspace.h> - -#include <asm/ddb5xxx/ddb5xxx.h> - -static int irq_base; - -/* - * Interrupt Programming - */ -void nile4_map_irq(int nile4_irq, int cpu_irq) -{ - u32 offset, t; - - offset = DDB_INTCTRL; - if (nile4_irq >= 8) { - offset += 4; - nile4_irq -= 8; - } - t = ddb_in32(offset); - t &= ~(7 << (nile4_irq * 4)); - t |= cpu_irq << (nile4_irq * 4); - ddb_out32(offset, t); -} - -void nile4_map_irq_all(int cpu_irq) -{ - u32 all, t; - - all = cpu_irq; - all |= all << 4; - all |= all << 8; - all |= all << 16; - t = ddb_in32(DDB_INTCTRL); - t &= 0x88888888; - t |= all; - ddb_out32(DDB_INTCTRL, t); - t = ddb_in32(DDB_INTCTRL + 4); - t &= 0x88888888; - t |= all; - ddb_out32(DDB_INTCTRL + 4, t); -} - -void nile4_enable_irq(unsigned int nile4_irq) -{ - u32 offset, t; - - nile4_irq-=irq_base; - - ddb5074_led_hex(8); - - offset = DDB_INTCTRL; - if (nile4_irq >= 8) { - offset += 4; - nile4_irq -= 8; - } - ddb5074_led_hex(9); - t = ddb_in32(offset); - ddb5074_led_hex(0xa); - t |= 8 << (nile4_irq * 4); - ddb_out32(offset, t); - ddb5074_led_hex(0xb); -} - -void nile4_disable_irq(unsigned int nile4_irq) -{ - u32 offset, t; - - nile4_irq-=irq_base; - - offset = DDB_INTCTRL; - if (nile4_irq >= 8) { - offset += 4; - nile4_irq -= 8; - } - t = ddb_in32(offset); - t &= ~(8 << (nile4_irq * 4)); - ddb_out32(offset, t); -} - -void nile4_disable_irq_all(void) -{ - ddb_out32(DDB_INTCTRL, 0); - ddb_out32(DDB_INTCTRL + 4, 0); -} - -u16 nile4_get_irq_stat(int cpu_irq) -{ - return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2); -} - -void nile4_enable_irq_output(int cpu_irq) -{ - u32 t; - - t = ddb_in32(DDB_INTSTAT1 + 4); - t |= 1 << (16 + cpu_irq); - ddb_out32(DDB_INTSTAT1, t); -} - -void nile4_disable_irq_output(int cpu_irq) -{ - u32 t; - - t = ddb_in32(DDB_INTSTAT1 + 4); - t &= ~(1 << (16 + cpu_irq)); - ddb_out32(DDB_INTSTAT1, t); -} - -void nile4_set_pci_irq_polarity(int pci_irq, int high) -{ - u32 t; - - t = ddb_in32(DDB_INTPPES); - if (high) - t &= ~(1 << (pci_irq * 2)); - else - t |= 1 << (pci_irq * 2); - ddb_out32(DDB_INTPPES, t); -} - -void nile4_set_pci_irq_level_or_edge(int pci_irq, int level) -{ - u32 t; - - t = ddb_in32(DDB_INTPPES); - if (level) - t |= 2 << (pci_irq * 2); - else - t &= ~(2 << (pci_irq * 2)); - ddb_out32(DDB_INTPPES, t); -} - -void nile4_clear_irq(int nile4_irq) -{ - nile4_irq-=irq_base; - ddb_out32(DDB_INTCLR, 1 << nile4_irq); -} - -void nile4_clear_irq_mask(u32 mask) -{ - ddb_out32(DDB_INTCLR, mask); -} - -u8 nile4_i8259_iack(void) -{ - u8 irq; - u32 reg; - - /* Set window 0 for interrupt acknowledge */ - reg = ddb_in32(DDB_PCIINIT0); - - ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32); - irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE); - /* restore window 0 for PCI I/O space */ - // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32); - ddb_out32(DDB_PCIINIT0, reg); - - /* i8269.c set the base vector to be 0x0 */ - return irq ; -} - -static unsigned int nile4_irq_startup(unsigned int irq) { - - nile4_enable_irq(irq); - return 0; - -} - -static void nile4_ack_irq(unsigned int irq) { - - ddb5074_led_hex(4); - - nile4_clear_irq(irq); - ddb5074_led_hex(2); - nile4_disable_irq(irq); - - ddb5074_led_hex(0); -} - -static void nile4_irq_end(unsigned int irq) { - - ddb5074_led_hex(3); - if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - ddb5074_led_hex(5); - nile4_enable_irq(irq); - ddb5074_led_hex(7); - } - - ddb5074_led_hex(1); -} - -#define nile4_irq_shutdown nile4_disable_irq - -static hw_irq_controller nile4_irq_controller = { - .typename = "nile4", - .startup = nile4_irq_startup, - .shutdown = nile4_irq_shutdown, - .enable = nile4_enable_irq, - .disable = nile4_disable_irq, - .ack = nile4_ack_irq, - .end = nile4_irq_end, -}; - -void nile4_irq_setup(u32 base) { - - int i; - - irq_base=base; - - /* Map all interrupts to CPU int #0 */ - nile4_map_irq_all(0); - - /* PCI INTA#-E# must be level triggered */ - nile4_set_pci_irq_level_or_edge(0, 1); - nile4_set_pci_irq_level_or_edge(1, 1); - nile4_set_pci_irq_level_or_edge(2, 1); - nile4_set_pci_irq_level_or_edge(3, 1); - nile4_set_pci_irq_level_or_edge(4, 1); - - /* PCI INTA#-D# must be active low, INTE# must be active high */ - nile4_set_pci_irq_polarity(0, 0); - nile4_set_pci_irq_polarity(1, 0); - nile4_set_pci_irq_polarity(2, 0); - nile4_set_pci_irq_polarity(3, 0); - nile4_set_pci_irq_polarity(4, 1); - - - for (i = 0; i < 16; i++) { - nile4_clear_irq(i); - nile4_disable_irq(i); - } - - /* Enable CPU int #0 */ - nile4_enable_irq_output(0); - - for (i= base; i< base + NUM_NILE4_INTERRUPTS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &nile4_irq_controller; - } -} - -#if defined(CONFIG_RUNTIME_DEBUG) -void nile4_dump_irq_status(void) -{ - printk(KERN_DEBUG " - CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4), - (void *) ddb_in32(DDB_CPUSTAT)); - printk(KERN_DEBUG " - INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4), - (void *) ddb_in32(DDB_INTCTRL)); - printk(KERN_DEBUG - "INTSTAT0 = %p:%p\n", - (void *) ddb_in32(DDB_INTSTAT0 + 4), - (void *) ddb_in32(DDB_INTSTAT0)); - printk(KERN_DEBUG - "INTSTAT1 = %p:%p\n", - (void *) ddb_in32(DDB_INTSTAT1 + 4), - (void *) ddb_in32(DDB_INTSTAT1)); - printk(KERN_DEBUG - "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4), - (void *) ddb_in32(DDB_INTCLR)); - printk(KERN_DEBUG - "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4), - (void *) ddb_in32(DDB_INTPPES)); -} - -#endif diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c deleted file mode 100644 index 91456b068c2..00000000000 --- a/arch/mips/ddb5xxx/ddb5074/setup.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - */ -#include <linux/init.h> -#include <linux/kbd_ll.h> -#include <linux/kernel.h> -#include <linux/kdev_t.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/pm.h> - -#include <asm/addrspace.h> -#include <asm/bcache.h> -#include <asm/irq.h> -#include <asm/reboot.h> -#include <asm/gdb-stub.h> -#include <asm/time.h> -#include <asm/nile4.h> -#include <asm/ddb5xxx/ddb5074.h> -#include <asm/ddb5xxx/ddb5xxx.h> - -static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000; - -static void ddb_machine_restart(char *command) -{ - u32 t; - - /* PCI cold reset */ - t = nile4_in32(NILE4_PCICTRL + 4); - t |= 0x40000000; - nile4_out32(NILE4_PCICTRL + 4, t); - /* CPU cold reset */ - t = nile4_in32(NILE4_CPUSTAT); - t |= 1; - nile4_out32(NILE4_CPUSTAT, t); - /* Call the PROM */ - back_to_prom(); -} - -static void ddb_machine_halt(void) -{ - printk("DDB Vrc-5074 halted.\n"); - do { - } while (1); -} - -static void ddb_machine_power_off(void) -{ - printk("DDB Vrc-5074 halted. Please turn off the power.\n"); - do { - } while (1); -} - -extern void rtc_ds1386_init(unsigned long base); - -extern void (*board_timer_setup) (struct irqaction * irq); - -static void __init ddb_timer_init(struct irqaction *irq) -{ - /* set the clock to 1 Hz */ - nile4_out32(NILE4_T2CTRL, 1000000); - /* enable the General-Purpose Timer */ - nile4_out32(NILE4_T2CTRL + 4, 0x00000001); - /* reset timer */ - nile4_out32(NILE4_T2CNTR, 0); - /* enable interrupt */ - setup_irq(nile4_to_irq(NILE4_INT_GPT), irq); - nile4_enable_irq(nile4_to_irq(NILE4_INT_GPT)); - change_c0_status(ST0_IM, - IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); - -} - -static void __init ddb_time_init(void) -{ - /* we have ds1396 RTC chip */ - rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE)); -} - - - -void __init plat_setup(void) -{ - set_io_port_base(NILE4_PCI_IO_BASE); - isa_slot_offset = NILE4_PCI_MEM_BASE; - board_timer_setup = ddb_timer_init; - board_time_init = ddb_time_init; - - - _machine_restart = ddb_machine_restart; - _machine_halt = ddb_machine_halt; - pm_power_off = ddb_machine_power_off; - - ddb_out32(DDB_BAR0, 0); - - ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, 0x10); - ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE , 0x10); - - /* Reboot on panic */ - panic_timeout = 180; -} - -#define USE_NILE4_SERIAL 0 - -#if USE_NILE4_SERIAL -#define ns16550_in(reg) nile4_in8((reg)*8) -#define ns16550_out(reg, val) nile4_out8((reg)*8, (val)) -#else -#define NS16550_BASE (NILE4_PCI_IO_BASE+0x03f8) -static inline u8 ns16550_in(u32 reg) -{ - return *(volatile u8 *) (NS16550_BASE + reg); -} - -static inline void ns16550_out(u32 reg, u8 val) -{ - *(volatile u8 *) (NS16550_BASE + reg) = val; -} -#endif - -#define NS16550_RBR 0 -#define NS16550_THR 0 -#define NS16550_DLL 0 -#define NS16550_IER 1 -#define NS16550_DLM 1 -#define NS16550_FCR 2 -#define NS16550_IIR 2 -#define NS16550_LCR 3 -#define NS16550_MCR 4 -#define NS16550_LSR 5 -#define NS16550_MSR 6 -#define NS16550_SCR 7 - -#define NS16550_LSR_DR 0x01 /* Data ready */ -#define NS16550_LSR_OE 0x02 /* Overrun */ -#define NS16550_LSR_PE 0x04 /* Parity error */ -#define NS16550_LSR_FE 0x08 /* Framing error */ -#define NS16550_LSR_BI 0x10 /* Break */ -#define NS16550_LSR_THRE 0x20 /* Xmit holding register empty */ -#define NS16550_LSR_TEMT 0x40 /* Xmitter empty */ -#define NS16550_LSR_ERR 0x80 /* Error */ - - -void _serinit(void) -{ -#if USE_NILE4_SERIAL - ns16550_out(NS16550_LCR, 0x80); - ns16550_out(NS16550_DLM, 0x00); - ns16550_out(NS16550_DLL, 0x36); /* 9600 baud */ - ns16550_out(NS16550_LCR, 0x00); - ns16550_out(NS16550_LCR, 0x03); - ns16550_out(NS16550_FCR, 0x47); -#else - /* done by PMON */ -#endif -} - -void _putc(char c) -{ - while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); - ns16550_out(NS16550_THR, c); - if (c == '\n') { - while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); - ns16550_out(NS16550_THR, '\r'); - } -} - -void _puts(const char *s) -{ - char c; - while ((c = *s++)) - _putc(c); -} - -char _getc(void) -{ - while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR)); - return ns16550_in(NS16550_RBR); -} - -int _testc(void) -{ - return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0; -} - - -/* - * Hexadecimal 7-segment LED - */ -void ddb5074_led_hex(int hex) -{ - outb(hex, 0x80); -} - - -/* - * LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543 - */ -struct pci_dev *pci_pmu = NULL; - -void ddb5074_led_d2(int on) -{ - u8 t; - - if (pci_pmu) { - pci_read_config_byte(pci_pmu, 0x7e, &t); - if (on) - t &= 0x7f; - else - t |= 0x80; - pci_write_config_byte(pci_pmu, 0x7e, t); - } -} - -void ddb5074_led_d3(int on) -{ - u8 t; - - if (pci_pmu) { - pci_read_config_byte(pci_pmu, 0x7e, &t); - if (on) - t &= 0xbf; - else - t |= 0x40; - pci_write_config_byte(pci_pmu, 0x7e, t); - } -} diff --git a/arch/mips/ddb5xxx/ddb5476/Makefile b/arch/mips/ddb5xxx/ddb5476/Makefile deleted file mode 100644 index ab0312cb47b..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the NEC DDB Vrc-5476 specific kernel interface routines -# under Linux. -# - -obj-y += setup.o irq.o nile4_pic.o vrc5476_irq.o -obj-$(CONFIG_KGDB) += dbg_io.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c deleted file mode 100644 index f2296a99995..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * kgdb io functions for DDB5476. We use the second serial port. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* ======================= CONFIG ======================== */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE 0xa60002f8 -#define MAX_BAUD 115200 - -/* distance in bytes between two serial registers */ -#define REG_OFFSET 1 - -/* - * 0 - kgdb does serial init - * 1 - kgdb skip serial init - */ -static int remoteDebugInitialized = 0; - -/* - * the default baud rate *if* kgdb does serial init - */ -#define BAUD_DEFAULT UART16550_BAUD_38400 - -/* ======================= END OF CONFIG ======================== */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up baud rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(BAUD_DEFAULT, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(BAUD_DEFAULT, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/ddb5xxx/ddb5476/irq.c b/arch/mips/ddb5xxx/ddb5476/irq.c deleted file mode 100644 index 7583a1f3071..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/irq.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * arch/mips/ddb5476/irq.c -- NEC DDB Vrc-5476 interrupt routines - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - * - * Re-write the whole thing to use new irq.c file. - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> - -#include <asm/i8259.h> -#include <asm/io.h> -#include <asm/ptrace.h> - -#include <asm/ddb5xxx/ddb5xxx.h> - -#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ -#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */ -#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */ - -#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */ -#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */ -#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */ - -#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */ -#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */ - -#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */ -#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */ - -#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */ -#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */ - -static void m1543_irq_setup(void) -{ - /* - * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all - * the possible IO sources in the M1543 are in use by us. We will - * use the following mapping: - * - * IRQ1 - keyboard (default set by M1543) - * IRQ3 - reserved for UART B (default set by M1543) (note that - * the schematics for the DDB Vrc-5476 board seem to - * indicate that IRQ3 is connected to the DS1386 - * watchdog timer interrupt output so we might have - * a conflict) - * IRQ4 - reserved for UART A (default set by M1543) - * IRQ5 - parallel (default set by M1543) - * IRQ8 - DS1386 time of day (RTC) interrupt - * IRQ9 - USB (hardwired in ddb_setup) - * IRQ10 - PMU (hardwired in ddb_setup) - * IRQ12 - mouse - * IRQ14,15 - IDE controller (need to be confirmed, jsun) - */ - - /* - * Assing mouse interrupt to IRQ12 - */ - - /* Enter configuration mode */ - outb(0x51, M1543_PNP_CONFIG); - outb(0x23, M1543_PNP_CONFIG); - - /* Select logical device 7 (Keyboard) */ - outb(0x07, M1543_PNP_INDEX); - outb(0x07, M1543_PNP_DATA); - - /* Select IRQ12 */ - outb(0x72, M1543_PNP_INDEX); - outb(0x0c, M1543_PNP_DATA); - - /* Leave configration mode */ - outb(0xbb, M1543_PNP_CONFIG); -} - -static void nile4_irq_setup(void) -{ - int i; - - /* Map all interrupts to CPU int #0 (IP2) */ - nile4_map_irq_all(0); - - /* PCI INTA#-E# must be level triggered */ - nile4_set_pci_irq_level_or_edge(0, 1); - nile4_set_pci_irq_level_or_edge(1, 1); - nile4_set_pci_irq_level_or_edge(2, 1); - nile4_set_pci_irq_level_or_edge(3, 1); - - /* PCI INTA#, B#, D# must be active low, INTC# must be active high */ - nile4_set_pci_irq_polarity(0, 0); - nile4_set_pci_irq_polarity(1, 0); - nile4_set_pci_irq_polarity(2, 1); - nile4_set_pci_irq_polarity(3, 0); - - for (i = 0; i < 16; i++) - nile4_clear_irq(i); - - /* Enable CPU int #0 */ - nile4_enable_irq_output(0); - - /* memory resource acquire in ddb_setup */ -} - -static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; -static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL }; - -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); -extern void mips_cpu_irq_init(u32 irq_base); -extern void vrc5476_irq_init(u32 irq_base); - -extern void vrc5476_irq_dispatch(struct pt_regs *regs); - -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP7) - do_IRQ(CPU_IRQ_BASE + 7, regs); - else if (pending & STATUSF_IP2) - vrc5476_irq_dispatch(regs); - else if (pending & STATUSF_IP3) - do_IRQ(CPU_IRQ_BASE + 3, regs); - else if (pending & STATUSF_IP4) - do_IRQ(CPU_IRQ_BASE + 4, regs); - else if (pending & STATUSF_IP5) - do_IRQ(CPU_IRQ_BASE + 5, regs); - else if (pending & STATUSF_IP6) - do_IRQ(CPU_IRQ_BASE + 6, regs); - else if (pending & STATUSF_IP0) - do_IRQ(CPU_IRQ_BASE, regs); - else if (pending & STATUSF_IP1) - do_IRQ(CPU_IRQ_BASE + 1, regs); - - vrc5476_irq_dispatch(regs); -} - -void __init arch_init_irq(void) -{ - /* hardware initialization */ - nile4_irq_setup(); - m1543_irq_setup(); - - /* controller setup */ - init_i8259_irqs(); - vrc5476_irq_init(VRC5476_IRQ_BASE); - mips_cpu_irq_init(CPU_IRQ_BASE); - - /* setup cascade interrupts */ - setup_irq(VRC5476_IRQ_BASE + VRC5476_I8259_CASCADE, &irq_cascade); - setup_irq(CPU_IRQ_BASE + CPU_VRC5476_CASCADE, &irq_cascade); - - /* setup error interrupts for debugging */ - setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CPCE, &irq_error); - setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CNTD, &irq_error); - setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_MCE, &irq_error); - setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error); - setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error); - setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error); -} diff --git a/arch/mips/ddb5xxx/ddb5476/nile4_pic.c b/arch/mips/ddb5xxx/ddb5476/nile4_pic.c deleted file mode 100644 index e930cee7944..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/nile4_pic.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * arch/mips/ddb5476/nile4.c -- - * low-level PIC code for NEC Vrc-5476 (Nile 4) - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - */ -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/types.h> - -#include <asm/addrspace.h> - -#include <asm/ddb5xxx/ddb5xxx.h> - - -/* - * Interrupt Programming - */ -void nile4_map_irq(int nile4_irq, int cpu_irq) -{ - u32 offset, t; - - offset = DDB_INTCTRL; - if (nile4_irq >= 8) { - offset += 4; - nile4_irq -= 8; - } - t = ddb_in32(offset); - t &= ~(7 << (nile4_irq * 4)); - t |= cpu_irq << (nile4_irq * 4); - ddb_out32(offset, t); -} - -void nile4_map_irq_all(int cpu_irq) -{ - u32 all, t; - - all = cpu_irq; - all |= all << 4; - all |= all << 8; - all |= all << 16; - t = ddb_in32(DDB_INTCTRL); - t &= 0x88888888; - t |= all; - ddb_out32(DDB_INTCTRL, t); - t = ddb_in32(DDB_INTCTRL + 4); - t &= 0x88888888; - t |= all; - ddb_out32(DDB_INTCTRL + 4, t); -} - -void nile4_enable_irq(int nile4_irq) -{ - u32 offset, t; - - offset = DDB_INTCTRL; - if (nile4_irq >= 8) { - offset += 4; - nile4_irq -= 8; - } - t = ddb_in32(offset); - t |= 8 << (nile4_irq * 4); - ddb_out32(offset, t); -} - -void nile4_disable_irq(int nile4_irq) -{ - u32 offset, t; - - offset = DDB_INTCTRL; - if (nile4_irq >= 8) { - offset += 4; - nile4_irq -= 8; - } - t = ddb_in32(offset); - t &= ~(8 << (nile4_irq * 4)); - ddb_out32(offset, t); -} - -void nile4_disable_irq_all(void) -{ - ddb_out32(DDB_INTCTRL, 0); - ddb_out32(DDB_INTCTRL + 4, 0); -} - -u16 nile4_get_irq_stat(int cpu_irq) -{ - return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2); -} - -void nile4_enable_irq_output(int cpu_irq) -{ - u32 t; - - t = ddb_in32(DDB_INTSTAT1 + 4); - t |= 1 << (16 + cpu_irq); - ddb_out32(DDB_INTSTAT1, t); -} - -void nile4_disable_irq_output(int cpu_irq) -{ - u32 t; - - t = ddb_in32(DDB_INTSTAT1 + 4); - t &= ~(1 << (16 + cpu_irq)); - ddb_out32(DDB_INTSTAT1, t); -} - -void nile4_set_pci_irq_polarity(int pci_irq, int high) -{ - u32 t; - - t = ddb_in32(DDB_INTPPES); - if (high) - t &= ~(1 << (pci_irq * 2)); - else - t |= 1 << (pci_irq * 2); - ddb_out32(DDB_INTPPES, t); -} - -void nile4_set_pci_irq_level_or_edge(int pci_irq, int level) -{ - u32 t; - - t = ddb_in32(DDB_INTPPES); - if (level) - t |= 2 << (pci_irq * 2); - else - t &= ~(2 << (pci_irq * 2)); - ddb_out32(DDB_INTPPES, t); -} - -void nile4_clear_irq(int nile4_irq) -{ - ddb_out32(DDB_INTCLR, 1 << nile4_irq); -} - -void nile4_clear_irq_mask(u32 mask) -{ - ddb_out32(DDB_INTCLR, mask); -} - -u8 nile4_i8259_iack(void) -{ - u8 irq; - u32 reg; - - /* Set window 0 for interrupt acknowledge */ - reg = ddb_in32(DDB_PCIINIT0); - - ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32); - irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE); - /* restore window 0 for PCI I/O space */ - // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32); - ddb_out32(DDB_PCIINIT0, reg); - - /* i8269.c set the base vector to be 0x0 */ - return irq + I8259_IRQ_BASE; -} - -#if defined(CONFIG_RUNTIME_DEBUG) -void nile4_dump_irq_status(void) -{ - printk(KERN_DEBUG " - CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4), - (void *) ddb_in32(DDB_CPUSTAT)); - printk(KERN_DEBUG " - INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4), - (void *) ddb_in32(DDB_INTCTRL)); - printk(KERN_DEBUG - "INTSTAT0 = %p:%p\n", - (void *) ddb_in32(DDB_INTSTAT0 + 4), - (void *) ddb_in32(DDB_INTSTAT0)); - printk(KERN_DEBUG - "INTSTAT1 = %p:%p\n", - (void *) ddb_in32(DDB_INTSTAT1 + 4), - (void *) ddb_in32(DDB_INTSTAT1)); - printk(KERN_DEBUG - "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4), - (void *) ddb_in32(DDB_INTCLR)); - printk(KERN_DEBUG - "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4), - (void *) ddb_in32(DDB_INTPPES)); -} -#endif diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c deleted file mode 100644 index c902adef594..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/setup.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * arch/mips/ddb5476/setup.c -- NEC DDB Vrc-5476 setup routines - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - */ -#include <linux/init.h> -#include <linux/kbd_ll.h> -#include <linux/kernel.h> -#include <linux/kdev_t.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/pm.h> - -#include <asm/addrspace.h> -#include <asm/bcache.h> -#include <asm/irq.h> -#include <asm/reboot.h> -#include <asm/gdb-stub.h> -#include <asm/time.h> -#include <asm/debug.h> -#include <asm/traps.h> - -#include <asm/ddb5xxx/ddb5xxx.h> - -// #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ - -#ifdef USE_CPU_COUNTER_TIMER - -#define CPU_COUNTER_FREQUENCY 83000000 -#else -/* otherwise we use general purpose timer */ -#define TIMER_FREQUENCY 83000000 -#define TIMER_BASE DDB_T2CTRL -#define TIMER_IRQ (VRC5476_IRQ_BASE + VRC5476_IRQ_GPT) -#endif - -static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000; - -static void ddb_machine_restart(char *command) -{ - u32 t; - - /* PCI cold reset */ - t = ddb_in32(DDB_PCICTRL + 4); - t |= 0x40000000; - ddb_out32(DDB_PCICTRL + 4, t); - /* CPU cold reset */ - t = ddb_in32(DDB_CPUSTAT); - t |= 1; - ddb_out32(DDB_CPUSTAT, t); - /* Call the PROM */ - back_to_prom(); -} - -static void ddb_machine_halt(void) -{ - printk(KERN_NOTICE "DDB Vrc-5476 halted.\n"); - while (1); -} - -static void ddb_machine_power_off(void) -{ - printk(KERN_NOTICE "DDB Vrc-5476 halted. Please turn off the power.\n"); - while (1); -} - -extern void rtc_ds1386_init(unsigned long base); - -static void __init ddb_time_init(void) -{ -#if defined(USE_CPU_COUNTER_TIMER) - mips_hpt_frequency = CPU_COUNTER_FREQUENCY; -#endif - - /* we have ds1396 RTC chip */ - rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE)); -} - - -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); -static void __init ddb_timer_setup(struct irqaction *irq) -{ -#if defined(USE_CPU_COUNTER_TIMER) - - unsigned int count; - - /* we are using the cpu counter for timer interrupts */ - setup_irq(CPU_IRQ_BASE + 7, irq); - - /* to generate the first timer interrupt */ - count = read_c0_count(); - write_c0_compare(count + 1000); - -#else - - ddb_out32(TIMER_BASE, TIMER_FREQUENCY/HZ); - ddb_out32(TIMER_BASE+4, 0x1); /* enable timer */ - setup_irq(TIMER_IRQ, irq); -#endif -} - -static struct { - struct resource dma1; - struct resource timer; - struct resource rtc; - struct resource dma_page_reg; - struct resource dma2; -} ddb5476_ioport = { - { - "dma1", 0x00, 0x1f, IORESOURCE_BUSY}, { - "timer", 0x40, 0x5f, IORESOURCE_BUSY}, { - "rtc", 0x70, 0x7f, IORESOURCE_BUSY}, { - "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY}, { - "dma2", 0xc0, 0xdf, IORESOURCE_BUSY} -}; - -static struct { - struct resource nile4; -} ddb5476_iomem = { - { "Nile 4", DDB_BASE, DDB_BASE + DDB_SIZE - 1, IORESOURCE_BUSY} -}; - - -static void ddb5476_board_init(void); - -void __init plat_setup(void) -{ - set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE)); - - board_time_init = ddb_time_init; - board_timer_setup = ddb_timer_setup; - - _machine_restart = ddb_machine_restart; - _machine_halt = ddb_machine_halt; - pm_power_off = ddb_machine_power_off; - - /* request io port/mem resources */ - if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) || - request_resource(&ioport_resource, &ddb5476_ioport.timer) || - request_resource(&ioport_resource, &ddb5476_ioport.rtc) || - request_resource(&ioport_resource, - &ddb5476_ioport.dma_page_reg) - || request_resource(&ioport_resource, &ddb5476_ioport.dma2) - || request_resource(&iomem_resource, &ddb5476_iomem.nile4)) { - printk - ("ddb_setup - requesting oo port resources failed.\n"); - for (;;); - } - - /* Reboot on panic */ - panic_timeout = 180; - - /* [jsun] we need to set BAR0 so that SDRAM 0 appears at 0x0 in PCI */ - /* *(long*)0xbfa00218 = 0x8; */ - - /* board initialization stuff */ - ddb5476_board_init(); -} - -/* - * We don't trust bios. We essentially does hardware re-initialization - * as complete as possible, as far as we know we can safely do. - */ -static void ddb5476_board_init(void) -{ - /* ----------- setup PDARs ------------ */ - /* check SDRAM0, whether we are on MEM bus does not matter */ - db_assert((ddb_in32(DDB_SDRAM0) & 0xffffffef) == - ddb_calc_pdar(DDB_SDRAM_BASE, DDB_SDRAM_SIZE, 32, 0, 1)); - - /* SDRAM1 should be turned off. What is this for anyway ? */ - db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0); - - /* flash 1&2, DDB status, DDB control */ - ddb_set_pdar(DDB_DCS2, DDB_DCS2_BASE, DDB_DCS2_SIZE, 16, 0, 0); - ddb_set_pdar(DDB_DCS3, DDB_DCS3_BASE, DDB_DCS3_SIZE, 16, 0, 0); - ddb_set_pdar(DDB_DCS4, DDB_DCS4_BASE, DDB_DCS4_SIZE, 8, 0, 0); - ddb_set_pdar(DDB_DCS5, DDB_DCS5_BASE, DDB_DCS5_SIZE, 8, 0, 0); - - /* shut off other pdar so they don't accidentally get into the way */ - ddb_set_pdar(DDB_DCS6, 0xffffffff, 0, 32, 0, 0); - ddb_set_pdar(DDB_DCS7, 0xffffffff, 0, 32, 0, 0); - ddb_set_pdar(DDB_DCS8, 0xffffffff, 0, 32, 0, 0); - - /* verify VRC5477 base addr */ - /* don't care about some details */ - db_assert((ddb_in32(DDB_INTCS) & 0xffffff0f) == - ddb_calc_pdar(DDB_INTCS_BASE, DDB_INTCS_SIZE, 8, 0, 0)); - - /* verify BOOT ROM addr */ - /* don't care about some details */ - db_assert((ddb_in32(DDB_BOOTCS) & 0xffffff0f) == - ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0)); - - /* setup PCI windows - window1 for MEM/config, window0 for IO */ - ddb_set_pdar(DDB_PCIW0, DDB_PCI_IO_BASE, DDB_PCI_IO_SIZE, 32, 0, 1); - ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32); - - ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1); - ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32); - - /* ----------- setup PDARs ------------ */ - /* this is problematic - it will reset Aladin which cause we loose - * serial port, and we don't know how to set up Aladin chip again. - */ - // ddb_pci_reset_bus(); - - ddb_out32(DDB_BAR0, 0x00000008); - - ddb_out32(DDB_BARC, 0xffffffff); - ddb_out32(DDB_BARB, 0xffffffff); - ddb_out32(DDB_BAR1, 0xffffffff); - ddb_out32(DDB_BAR2, 0xffffffff); - ddb_out32(DDB_BAR3, 0xffffffff); - ddb_out32(DDB_BAR4, 0xffffffff); - ddb_out32(DDB_BAR5, 0xffffffff); - ddb_out32(DDB_BAR6, 0xffffffff); - ddb_out32(DDB_BAR7, 0xffffffff); - ddb_out32(DDB_BAR8, 0xffffffff); - - /* ----------- switch PCI1 to PCI CONFIG space ------------ */ - ddb_set_pdar(DDB_PCIW1, DDB_PCI_CONFIG_BASE, DDB_PCI_CONFIG_SIZE, 32, 0, 1); - ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_CFG, 0x0, DDB_PCI_ACCESS_32); - - /* ----- M1543 PCI setup ------ */ - - /* we know M1543 PCI-ISA controller is at addr:18 */ - /* xxxx1010 makes USB at addr:13 and PMU at addr:14 */ - *(volatile unsigned char *) 0xa8040072 &= 0xf0; - *(volatile unsigned char *) 0xa8040072 |= 0xa; - - /* setup USB interrupt to IRQ 9, (bit 0:3 - 0001) - * no IOCHRDY signal, (bit 7 - 1) - * M1543C & M7101 VID and Subsys Device ID are read-only (bit 6 - 1) - * Make USB Master INTAJ level to edge conversion (bit 4 - 1) - */ - *(unsigned char *) 0xa8040074 = 0xd1; - - /* setup PMU(SCI to IRQ 10 (bit 0:3 - 0011) - * SCI routing to IRQ 13 disabled (bit 7 - 1) - * SCI interrupt level to edge conversion bypassed (bit 4 - 0) - */ - *(unsigned char *) 0xa8040076 = 0x83; - - /* setup IDE controller - * enable IDE controller (bit 6 - 1) - * IDE IDSEL to be addr:24 (bit 4:5 - 11) - * no IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0) - * no IDE ATA Primary Bus Signal Pad Control (bit 2 - 0) - * primary IRQ is 14, secondary is 15 (bit 1:0 - 01 - */ - // *(unsigned char*)0xa8040058 = 0x71; - // *(unsigned char*)0xa8040058 = 0x79; - // *(unsigned char*)0xa8040058 = 0x74; // use SIRQ, primary tri-state - *(unsigned char *) 0xa8040058 = 0x75; // primary tri-state - -#if 0 - /* this is not necessary if M5229 does not use SIRQ */ - *(unsigned char *) 0xa8040044 = 0x0d; // primary to IRQ 14 - *(unsigned char *) 0xa8040075 = 0x0d; // secondary to IRQ 14 -#endif - - /* enable IDE in the M5229 config register 0x50 (bit 0 - 1) */ - /* M5229 IDSEL is addr:24; see above setting */ - *(unsigned char *) 0xa9000050 |= 0x1; - - /* enable bus master (bit 2) and IO decoding (bit 0) */ - *(unsigned char *) 0xa9000004 |= 0x5; - - /* enable native, copied from arch/ppc/k2boot/head.S */ - /* TODO - need volatile, need to be portable */ - *(unsigned char *) 0xa9000009 = 0xff; - - /* ----- end of M1543 PCI setup ------ */ - - /* ----- reset on-board ether chip ------ */ - *((volatile u32 *) 0xa8020004) |= 1; /* decode I/O */ - *((volatile u32 *) 0xa8020010) = 0; /* set BAR address */ - - /* send reset command */ - *((volatile u32 *) 0xa6000000) = 1; /* do a soft reset */ - - /* disable ether chip */ - *((volatile u32 *) 0xa8020004) = 0; /* disable any decoding */ - - /* put it into sleep */ - *((volatile u32 *) 0xa8020040) = 0x80000000; - - /* ----- end of reset on-board ether chip ------ */ - - /* ----------- switch PCI1 back to PCI MEM space ------------ */ - ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1); - ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32); -} diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c deleted file mode 100644 index a3c5e7b1801..00000000000 --- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * The irq controller for vrc5476. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/ptrace.h> - -#include <asm/system.h> - -#include <asm/ddb5xxx/ddb5xxx.h> - -static int irq_base; - -static void vrc5476_irq_enable(uint irq) -{ - nile4_enable_irq(irq - irq_base); -} - -static void vrc5476_irq_disable(uint irq) -{ - nile4_disable_irq(irq - irq_base); -} - -static unsigned int vrc5476_irq_startup(uint irq) -{ - nile4_enable_irq(irq - irq_base); - return 0; -} - -#define vrc5476_irq_shutdown vrc5476_irq_disable - -static void vrc5476_irq_ack(uint irq) -{ - nile4_clear_irq(irq - irq_base); - nile4_disable_irq(irq - irq_base); -} - -static void vrc5476_irq_end(uint irq) -{ - if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - vrc5476_irq_enable(irq); -} - -static hw_irq_controller vrc5476_irq_controller = { - .typename = "vrc5476", - .startup = vrc5476_irq_startup, - .shutdown = vrc5476_irq_shutdown, - .enable = vrc5476_irq_enable, - .disable = vrc5476_irq_disable, - .ack = vrc5476_irq_ack, - .end = vrc5476_irq_end -}; - -void __init -vrc5476_irq_init(u32 base) -{ - u32 i; - - irq_base = base; - for (i= base; i< base + NUM_VRC5476_IRQ; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &vrc5476_irq_controller; - } -} - - -void -vrc5476_irq_dispatch(struct pt_regs *regs) -{ - u32 mask; - int nile4_irq; - - mask = nile4_get_irq_stat(0); - - /* quick check for possible time interrupt */ - if (mask & (1 << VRC5476_IRQ_GPT)) { - do_IRQ(VRC5476_IRQ_BASE + VRC5476_IRQ_GPT, regs); - return; - } - - /* check for i8259 interrupts */ - if (mask & (1 << VRC5476_I8259_CASCADE)) { - int i8259_irq = nile4_i8259_iack(); - do_IRQ(I8259_IRQ_BASE + i8259_irq, regs); - return; - } - - /* regular nile4 interrupts (we should not really have any */ - for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1) { - if (mask & 1) { - do_IRQ(VRC5476_IRQ_BASE + nile4_irq, regs); - return; - } - } - spurious_interrupt(regs); -} diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c index 2f566034cc4..93167ecdb42 100644 --- a/arch/mips/ddb5xxx/ddb5477/setup.c +++ b/arch/mips/ddb5xxx/ddb5477/setup.c @@ -171,7 +171,7 @@ static void ddb5477_board_init(void); extern struct pci_controller ddb5477_ext_controller; extern struct pci_controller ddb5477_io_controller; -void __init plat_setup(void) +void __init plat_mem_setup(void) { /* initialize board - we don't trust the loader */ ddb5477_board_init(); |