aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r--arch/mips/kernel/mips-mt.c1
-rw-r--r--arch/mips/kernel/setup.c3
-rw-r--r--arch/mips/kernel/smp-mt.c193
-rw-r--r--arch/mips/kernel/smp.c23
-rw-r--r--arch/mips/kernel/smtc-proc.c1
-rw-r--r--arch/mips/kernel/smtc.c1
6 files changed, 123 insertions, 99 deletions
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 3d6b1ec1f32..640fb0cc6e3 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -17,7 +17,6 @@
#include <asm/system.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/mipsmtregs.h>
#include <asm/r4kcache.h>
#include <asm/cacheflush.h>
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7b4418dd585..269c252d956 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -29,6 +29,7 @@
#include <asm/cpu.h>
#include <asm/sections.h>
#include <asm/setup.h>
+#include <asm/smp-ops.h>
#include <asm/system.h>
struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
@@ -575,9 +576,7 @@ void __init setup_arch(char **cmdline_p)
arch_mem_init(cmdline_p);
resource_init();
-#ifdef CONFIG_SMP
plat_smp_setup();
-#endif
}
static int __init fpu_disable(char *s)
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 2ab0b7eeaa7..89e6f6aa516 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -215,72 +215,67 @@ static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0)
write_tc_c0_tchalt(TCHALT_H);
}
-/*
- * Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
- * secondarys
- */
-void __init plat_smp_setup(void)
+static void vsmp_send_ipi_single(int cpu, unsigned int action)
{
- unsigned int mvpconf0, ntc, tc, ncpu = 0;
- unsigned int nvpe;
+ int i;
+ unsigned long flags;
+ int vpflags;
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
- cpu_set(0, mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
- if (!cpu_has_mipsmt)
- return;
+ local_irq_save(flags);
- /* disable MT so we can configure */
- dvpe();
- dmt();
+ vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
+ switch (action) {
+ case SMP_CALL_FUNCTION:
+ i = C_SW1;
+ break;
- mvpconf0 = read_c0_mvpconf0();
- ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
+ case SMP_RESCHEDULE_YOURSELF:
+ default:
+ i = C_SW0;
+ break;
+ }
- nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
- smp_num_siblings = nvpe;
+ /* 1:1 mapping of vpe and tc... */
+ settc(cpu);
+ write_vpe_c0_cause(read_vpe_c0_cause() | i);
+ evpe(vpflags);
- /* we'll always have more TC's than VPE's, so loop setting everything
- to a sensible state */
- for (tc = 0; tc <= ntc; tc++) {
- settc(tc);
+ local_irq_restore(flags);
+}
- smp_tc_init(tc, mvpconf0);
- ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
- }
+static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ unsigned int i;
- /* Release config state */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ for_each_cpu_mask(i, mask)
+ vsmp_send_ipi_single(i, action);
+}
- /* We'll wait until starting the secondaries before starting MVPE */
+static void __cpuinit vsmp_init_secondary(void)
+{
+ /* Enable per-cpu interrupts */
- printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+ /* This is Malta specific: IPI,performance and timer inetrrupts */
+ write_c0_status((read_c0_status() & ~ST0_IM ) |
+ (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
}
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void __cpuinit vsmp_smp_finish(void)
{
- mips_mt_set_cpuoptions();
-
- /* set up ipi interrupts */
- if (cpu_has_vint) {
- set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
- set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
- }
+ write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
- cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+#ifdef CONFIG_MIPS_MT_FPAFF
+ /* If we have an FPU, enroll ourselves in the FPU-full mask */
+ if (cpu_has_fpu)
+ cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
- setup_irq(cpu_ipi_resched_irq, &irq_resched);
- setup_irq(cpu_ipi_call_irq, &irq_call);
+ local_irq_enable();
+}
- set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
- set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
+static void vsmp_cpus_done(void)
+{
}
/*
@@ -291,7 +286,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* (unsigned long)idle->thread_info the gp
* assumes a 1:1 mapping of TC => VPE
*/
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
{
struct thread_info *gp = task_thread_info(idle);
dvpe();
@@ -325,57 +320,81 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
evpe(EVPE_ENABLE);
}
-void __cpuinit prom_init_secondary(void)
-{
- /* Enable per-cpu interrupts */
-
- /* This is Malta specific: IPI,performance and timer inetrrupts */
- write_c0_status((read_c0_status() & ~ST0_IM ) |
- (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
-}
-
-void __cpuinit prom_smp_finish(void)
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+static void __init vsmp_smp_setup(void)
{
- write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+ unsigned int mvpconf0, ntc, tc, ncpu = 0;
+ unsigned int nvpe;
#ifdef CONFIG_MIPS_MT_FPAFF
/* If we have an FPU, enroll ourselves in the FPU-full mask */
if (cpu_has_fpu)
- cpu_set(smp_processor_id(), mt_fpu_cpumask);
+ cpu_set(0, mt_fpu_cpumask);
#endif /* CONFIG_MIPS_MT_FPAFF */
+ if (!cpu_has_mipsmt)
+ return;
- local_irq_enable();
-}
+ /* disable MT so we can configure */
+ dvpe();
+ dmt();
-void prom_cpus_done(void)
-{
-}
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
-void core_send_ipi(int cpu, unsigned int action)
-{
- int i;
- unsigned long flags;
- int vpflags;
+ mvpconf0 = read_c0_mvpconf0();
+ ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
- local_irq_save(flags);
+ nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+ smp_num_siblings = nvpe;
- vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */
+ /* we'll always have more TC's than VPE's, so loop setting everything
+ to a sensible state */
+ for (tc = 0; tc <= ntc; tc++) {
+ settc(tc);
- switch (action) {
- case SMP_CALL_FUNCTION:
- i = C_SW1;
- break;
+ smp_tc_init(tc, mvpconf0);
+ ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
+ }
- case SMP_RESCHEDULE_YOURSELF:
- default:
- i = C_SW0;
- break;
+ /* Release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* We'll wait until starting the secondaries before starting MVPE */
+
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+static void __init vsmp_prepare_cpus(unsigned int max_cpus)
+{
+ mips_mt_set_cpuoptions();
+
+ /* set up ipi interrupts */
+ if (cpu_has_vint) {
+ set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+ set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
- /* 1:1 mapping of vpe and tc... */
- settc(cpu);
- write_vpe_c0_cause(read_vpe_c0_cause() | i);
- evpe(vpflags);
+ cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
- local_irq_restore(flags);
+ setup_irq(cpu_ipi_resched_irq, &irq_resched);
+ setup_irq(cpu_ipi_call_irq, &irq_call);
+
+ set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
+ set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
}
+
+struct plat_smp_ops vsmp_smp_ops = {
+ .send_ipi_single = vsmp_send_ipi_single,
+ .send_ipi_mask = vsmp_send_ipi_mask,
+ .init_secondary = vsmp_init_secondary,
+ .smp_finish = vsmp_smp_finish,
+ .cpus_done = vsmp_cpus_done,
+ .boot_secondary = vsmp_boot_secondary,
+ .smp_setup = vsmp_smp_setup,
+ .prepare_cpus = vsmp_prepare_cpus,
+};
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 335be9bcf0d..1e5dfc28294 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -37,7 +37,6 @@
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/time.h>
#ifdef CONFIG_MIPS_MT_SMTC
@@ -84,6 +83,16 @@ static inline void set_cpu_sibling_map(int cpu)
cpu_set(cpu, cpu_sibling_map[cpu]);
}
+struct plat_smp_ops *mp_ops;
+
+__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
+{
+ if (ops)
+ printk(KERN_WARNING "Overriding previous set SMP ops\n");
+
+ mp_ops = ops;
+}
+
/*
* First C code run on the secondary CPUs after being started up by
* the master.
@@ -100,7 +109,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu_report();
per_cpu_trap_init();
mips_clockevent_init();
- prom_init_secondary();
+ mp_ops->init_secondary();
/*
* XXX parity protection should be folded in here when it's converted
@@ -112,7 +121,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu = smp_processor_id();
cpu_data[cpu].udelay_val = loops_per_jiffy;
- prom_smp_finish();
+ mp_ops->smp_finish();
set_cpu_sibling_map(cpu);
cpu_set(cpu, cpu_callin_map);
@@ -184,7 +193,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
smp_mb();
/* Send a message to all other CPUs and wait for them to respond */
- core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
+ mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
/* Wait for response */
/* FIXME: lock-up detection, backtrace on lock-up */
@@ -278,7 +287,7 @@ void smp_send_stop(void)
void __init smp_cpus_done(unsigned int max_cpus)
{
- prom_cpus_done();
+ mp_ops->cpus_done();
}
/* called from main before smp_init() */
@@ -286,7 +295,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
- plat_prepare_cpus(max_cpus);
+ mp_ops->prepare_cpus(max_cpus);
set_cpu_sibling_map(0);
#ifndef CONFIG_HOTPLUG_CPU
cpu_present_map = cpu_possible_map;
@@ -325,7 +334,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
if (IS_ERR(idle))
panic(KERN_ERR "Fork failed for CPU %d", cpu);
- prom_boot_secondary(cpu, idle);
+ mp_ops->boot_secondary(cpu, idle);
/*
* Trust is futile. We should really have timeouts ...
diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c
index 6f370999617..fe256559c99 100644
--- a/arch/mips/kernel/smtc-proc.c
+++ b/arch/mips/kernel/smtc-proc.c
@@ -14,7 +14,6 @@
#include <asm/system.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <linux/proc_fs.h>
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 9c92d42996c..85f700e5813 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -16,7 +16,6 @@
#include <asm/hazards.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
-#include <asm/smp.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <asm/time.h>