diff options
Diffstat (limited to 'arch/mips/pci')
40 files changed, 1574 insertions, 792 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index aba3dbf47ed..c58bd3d036f 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -2,16 +2,14 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o pci-dac.o +obj-y += pci.o # # PCI bus host bridge specific code # obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o -obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o -obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o @@ -22,17 +20,17 @@ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o # obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o -obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o +obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o -obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o -obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o +obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o +obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o +obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \ pci-yosemite.o obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c index c6cd6e9cdfb..45224fd2c7b 100644 --- a/arch/mips/pci/fixup-atlas.c +++ b/arch/mips/pci/fixup-atlas.c @@ -58,7 +58,7 @@ static char irq_tab[][5] __initdata = { {0, 0, 0, 0, 0 } /* 21: Unused */ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab[slot][pin]; } diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c index c2f8304fe55..ca0276c8070 100644 --- a/arch/mips/pci/fixup-au1000.c +++ b/arch/mips/pci/fixup-au1000.c @@ -35,7 +35,7 @@ extern char irq_tab_alchemy[][5]; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab_alchemy[slot][pin]; } diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c index 1e530751936..1416bca6d1a 100644 --- a/arch/mips/pci/fixup-capcella.c +++ b/arch/mips/pci/fixup-capcella.c @@ -38,7 +38,7 @@ static char irq_tab_capcella[][5] __initdata = { [14] = { -1, INTA, INTB, INTC, INTD } }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab_capcella[slot][pin]; } diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index d57ffd7242c..76b4f0ffb1e 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -58,8 +58,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, static void qube_raq_galileo_fixup(struct pci_dev *dev) { - unsigned short galileo_id; - if (dev->devfn != PCI_DEVFN(0, 0)) return; @@ -84,16 +82,14 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) * Therefore we must set the disconnect/retry cycle values to * something sensible when using the new Galileo. */ - pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id); - galileo_id &= 0xff; /* mask off class info */ - printk(KERN_INFO "Galileo: revision %u\n", galileo_id); + printk(KERN_INFO "Galileo: revision %u\n", dev->revision); #if 0 - if (galileo_id >= 0x10) { + if (dev->revision >= 0x10) { /* New Galileo, assumes PCI stop line to VIA is connected. */ GT_WRITE(GT_PCI0_TOR_OFS, 0x4020); - } else if (galileo_id == 0x1 || galileo_id == 0x2) + } else if (dev->revision == 0x1 || dev->revision == 0x2) #endif { signed int timeo; @@ -161,7 +157,7 @@ static char irq_tab_raq2[] __initdata = { [COBALT_PCICONF_ETH1] = COBALT_ETH1_IRQ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (cobalt_board_id < COBALT_BRD_ID_QUBE2) return irq_tab_qube1[slot]; diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c index 7abcfd175d4..a2705895561 100644 --- a/arch/mips/pci/fixup-emma2rh.c +++ b/arch/mips/pci/fixup-emma2rh.c @@ -89,7 +89,7 @@ static void __devinit emma2rh_pci_host_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH, emma2rh_pci_host_fixup); -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_map[slot][pin]; } diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c index 1da696d43f0..cd64d9f177c 100644 --- a/arch/mips/pci/fixup-excite.c +++ b/arch/mips/pci/fixup-excite.c @@ -21,7 +21,7 @@ #include <linux/pci.h> #include <excite.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (pin == 0) return -1; diff --git a/arch/mips/pci/fixup-ip32.c b/arch/mips/pci/fixup-ip32.c index 3e66b0aa63c..190fffd08d3 100644 --- a/arch/mips/pci/fixup-ip32.c +++ b/arch/mips/pci/fixup-ip32.c @@ -39,7 +39,7 @@ static char irq_tab_mace[][5] __initdata = { * irqs. I suppose a device without a pin A will thank us for doing it * right if there exists such a broken piece of crap. */ -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab_mace[slot][pin]; } diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index 73d18503517..e974394be7b 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -33,7 +33,7 @@ #include <asm/jmr3927/jmr3927.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-lm2e.c new file mode 100644 index 00000000000..e18ae4f574c --- /dev/null +++ b/arch/mips/pci/fixup-lm2e.c @@ -0,0 +1,242 @@ +/* + * fixup-lm2e.c + * + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, ICT CAS + * lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/mips-boards/bonito64.h> + +/* South bridge slot number is set by the pci probe process */ +static u8 sb_slot = 5; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = 0; + + if (slot == sb_slot) { + switch (PCI_FUNC(dev->devfn)) { + case 2: + irq = 10; + break; + case 3: + irq = 11; + break; + case 5: + irq = 9; + break; + } + } else { + irq = BONITO_IRQ_BASE + 25 + pin; + } + return irq; + +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static void __init loongson2e_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Configues port 1, 2, 3, 4 to be validate*/ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); + + /* System clock is 48-MHz Oscillator. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} + +static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) +{ + unsigned char c; + + sb_slot = PCI_SLOT(pdev->devfn); + + printk(KERN_INFO "via686b fix: ISA bridge\n"); + + /* Enable I/O Recovery time */ + pci_write_config_byte(pdev, 0x40, 0x08); + + /* Enable ISA refresh */ + pci_write_config_byte(pdev, 0x41, 0x01); + + /* disable ISA line buffer */ + pci_write_config_byte(pdev, 0x45, 0x00); + + /* Gate INTR, and flush line buffer */ + pci_write_config_byte(pdev, 0x46, 0xe0); + + /* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */ + /* pci_write_config_byte(pdev, 0x47, 0x20); */ + + /* + * enable PCI Delay Transaction, Enable EISA ports 4D0/4D1. + * enable time-out timer + */ + pci_write_config_byte(pdev, 0x47, 0xe6); + + /* + * enable level trigger on pci irqs: 9,10,11,13 + * important! without this PCI interrupts won't work + */ + outb(0x2e, 0x4d1); + + /* 512 K PCI Decode */ + pci_write_config_byte(pdev, 0x48, 0x01); + + /* Wait for PGNT before grant to ISA Master/DMA */ + pci_write_config_byte(pdev, 0x4a, 0x84); + + /* + * Plug'n'Play + * + * Parallel DRQ 3, Floppy DRQ 2 (default) + */ + pci_write_config_byte(pdev, 0x50, 0x0e); + + /* + * IRQ Routing for Floppy and Parallel port + * + * IRQ 6 for floppy, IRQ 7 for parallel port + */ + pci_write_config_byte(pdev, 0x51, 0x76); + + /* IRQ Routing for serial ports (take IRQ 3 and 4) */ + pci_write_config_byte(pdev, 0x52, 0x34); + + /* All IRQ's level triggered. */ + pci_write_config_byte(pdev, 0x54, 0x00); + + /* route PIRQA-D irq */ + pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */ + pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */ + /* 3-0, PIRQB */ + pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */ + + /* enable function 5/6, audio/modem */ + pci_read_config_byte(pdev, 0x85, &c); + c &= ~(0x3 << 2); + pci_write_config_byte(pdev, 0x85, c); + + printk(KERN_INFO"via686b fix: ISA bridge done\n"); +} + +static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) +{ + printk(KERN_INFO"via686b fix: IDE\n"); + + /* Modify IDE controller setup */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48); + pci_write_config_byte(pdev, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_write_config_byte(pdev, 0x40, 0x0b); + /* legacy mode */ + pci_write_config_byte(pdev, 0x42, 0x09); + +#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */ + /* disable read prefetch/write post buffers */ + pci_write_config_byte(pdev, 0x41, 0x02); + + /* use 3/4 as fifo thresh hold */ + pci_write_config_byte(pdev, 0x43, 0x0a); + pci_write_config_byte(pdev, 0x44, 0x00); + + pci_write_config_byte(pdev, 0x45, 0x00); +#else + pci_write_config_byte(pdev, 0x41, 0xc2); + pci_write_config_byte(pdev, 0x43, 0x35); + pci_write_config_byte(pdev, 0x44, 0x1c); + + pci_write_config_byte(pdev, 0x45, 0x10); +#endif + + printk(KERN_INFO"via686b fix: IDE done\n"); +} + +static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev) +{ + /* irq routing */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); +} + +static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev) +{ + /* irq routing */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); +} + +static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev) +{ + unsigned int val; + unsigned char c; + + /* enable IO */ + pci_write_config_byte(pdev, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_read_config_dword(pdev, 0x4, &val); + pci_write_config_dword(pdev, 0x4, val | 1); + + /* route ac97 IRQ */ + pci_write_config_byte(pdev, 0x3c, 9); + + pci_read_config_byte(pdev, 0x8, &c); + + /* link control: enable link & SGD PCM output */ + pci_write_config_byte(pdev, 0x41, 0xcc); + + /* disable game port, FM, midi, sb, enable write to reg2c-2f */ + pci_write_config_byte(pdev, 0x42, 0x20); + + /* we are using Avance logic codec */ + pci_write_config_word(pdev, 0x2c, 0x1005); + pci_write_config_word(pdev, 0x2e, 0x4710); + pci_read_config_dword(pdev, 0x2c, &val); + + pci_write_config_byte(pdev, 0x42, 0x0); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, + loongson2e_686b_func0_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, + loongson2e_686b_func1_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, + loongson2e_686b_func2_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, + loongson2e_686b_func3_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, + loongson2e_686b_func5_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson2e_nec_fixup); diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index bf2c41d1e9c..0f48498bc23 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -36,7 +36,7 @@ static char irq_tab[][5] __initdata = { {0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int virq; virq = irq_tab[slot][pin]; diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index 3c9ae41f751..59115962572 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -34,7 +34,7 @@ static const int irq_tab_mpc30x[] __initdata = { [29] = MQ200_IRQ, }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 30) return internal_func_irqs[PCI_FUNC(dev->devfn)]; diff --git a/arch/mips/pci/fixup-ocelot-c.c b/arch/mips/pci/fixup-ocelot-c.c deleted file mode 100644 index d45494807a3..00000000000 --- a/arch/mips/pci/fixup-ocelot-c.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Based on work for the Linux port to the Ocelot board, which is - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * arch/mips/momentum/ocelot_g/pci.c - * Board-specific PCI routines for mv64340 controller. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int bus = dev->bus->number; - - if (bus == 0 && slot == 1) - return 2; /* PCI-X A */ - if (bus == 1 && slot == 1) - return 12; /* PCI-X B */ - if (bus == 1 && slot == 2) - return 4; /* PCI B */ - -return 0; - panic("Whooops in pcibios_map_irq"); -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-ocelot3.c b/arch/mips/pci/fixup-ocelot3.c deleted file mode 100644 index ececc03ec62..00000000000 --- a/arch/mips/pci/fixup-ocelot3.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Montavista Software Inc. - * Author: Manish Lachwani (mlachwani@mvista.com) - * - * Looking at the schematics for the Ocelot-3 board, there are - * two PCI busses and each bus has two PCI slots. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/mipsregs.h> - -/* - * Do platform specific device initialization at - * pci_enable_device() time - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int bus = dev->bus->number; - - if (bus == 0 && slot == 1) - return 2; /* PCI-X A */ - if (bus == 0 && slot == 2) - return 3; /* PCI-X B */ - if (bus == 1 && slot == 1) - return 4; /* PCI A */ - if (bus == 1 && slot == 2) - return 5; /* PCI B */ - -return 0; - panic("Whooops in pcibios_map_irq"); -} diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c new file mode 100644 index 00000000000..00261211dbf --- /dev/null +++ b/arch/mips/pci/fixup-pmcmsp.c @@ -0,0 +1,216 @@ +/* + * PMC-Sierra MSP board specific pci fixups. + * + * Copyright 2001 MontaVista Software Inc. + * Copyright 2005-2007 PMC-Sierra, Inc + * + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef CONFIG_PCI + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/byteorder.h> + +#include <msp_pci.h> +#include <msp_cic_int.h> + +/* PCI interrupt pins */ +#define IRQ4 MSP_INT_EXT4 +#define IRQ5 MSP_INT_EXT5 +#define IRQ6 MSP_INT_EXT6 + +#if defined(CONFIG_PMC_MSP7120_GW) +/* Garibaldi Board IRQ wiring to PCI slots */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ + {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ + {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ + {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */ + {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */ +}; + +#elif defined(CONFIG_PMC_MSP7120_EVAL) + +/* MSP7120 Eval Board IRQ wiring to PCI slots */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */ + {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */ + {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */ + {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ + {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ +}; + +#else + +/* Unknown board -- don't assign any IRQs */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ + {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ + {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ + {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ + {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ +}; +#endif + +/***************************************************************************** + * + * FUNCTION: pcibios_plat_dev_init + * _________________________________________________________________________ + * + * DESCRIPTION: Perform platform specific device initialization at + * pci_enable_device() time. + * None are needed for the MSP7120 PCI Controller. + * + * INPUTS: dev - structure describing the PCI device + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL + * + ****************************************************************************/ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: pcibios_map_irq + * _________________________________________________________________________ + * + * DESCRIPTION: Perform board supplied PCI IRQ mapping routine. + * + * INPUTS: dev - unused + * slot - PCI slot. Identified by which bit of the AD[] bus + * drives the IDSEL line. AD[10] is 0, AD[31] is + * slot 21. + * pin - numbered using the scheme of the PCI_INTERRUPT_PIN + * field of the config header. + * + * OUTPUTS: none + * + * RETURNS: IRQ number + * + ****************************************************************************/ +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ +#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL) + printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n"); +#endif + printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n", + irq_tab[slot][pin], slot, pin); + + return irq_tab[slot][pin]; +} + +#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c index 50546dab668..96857ac63bf 100644 --- a/arch/mips/pci/fixup-pnx8550.c +++ b/arch/mips/pci/fixup-pnx8550.c @@ -45,7 +45,7 @@ void __init pcibios_fixup(void) /* nothing to do here */ } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return pnx8550_irq_tab[slot][pin]; } diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index ceeb1860895..3cdbecb8e71 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -119,7 +119,7 @@ int pci_get_irq(struct pci_dev *dev, int pin) return irq; } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq; diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index 36e5fb1b378..a45bedd1723 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -120,7 +120,7 @@ static inline int is_rm300_revd(void) return (csmsr & 0xa0) == 0x20; } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (sni_brd_type) { case SNI_BRD_PCI_TOWER: diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index 734f2b71e16..720a2b720c5 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -23,7 +23,7 @@ #include <asm/vr41xx/tb0219.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq = -1; diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c index c9e7cb4361a..e3eedf4bf9b 100644 --- a/arch/mips/pci/fixup-tb0226.c +++ b/arch/mips/pci/fixup-tb0226.c @@ -23,7 +23,7 @@ #include <asm/vr41xx/giu.h> #include <asm/vr41xx/tb0226.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq = -1; diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c index fbe6bcb2819..267ab3dc3d4 100644 --- a/arch/mips/pci/fixup-tb0287.c +++ b/arch/mips/pci/fixup-tb0287.c @@ -22,7 +22,7 @@ #include <asm/vr41xx/tb0287.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char bus; int irq = -1; diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c index f455520ada8..2485f47dfe6 100644 --- a/arch/mips/pci/fixup-tx4938.c +++ b/arch/mips/pci/fixup-tx4938.c @@ -69,7 +69,7 @@ int pci_get_irq(struct pci_dev *dev, int pin) return irq; } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = 0; diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index a8d9d22b13d..de5e5f6bbf4 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -169,7 +169,7 @@ void i8259_init(void) } #endif -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { extern int pci_probe_only; pci_probe_only = 1; diff --git a/arch/mips/pci/fixup-wrppmc.c b/arch/mips/pci/fixup-wrppmc.c index 3357c1300bb..3d277549d5d 100644 --- a/arch/mips/pci/fixup-wrppmc.c +++ b/arch/mips/pci/fixup-wrppmc.c @@ -25,7 +25,7 @@ static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = { [6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0}, }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return pci_irq_tab[slot][pin]; } diff --git a/arch/mips/pci/fixup-yosemite.c b/arch/mips/pci/fixup-yosemite.c index 81d77a587a5..fdafb13a793 100644 --- a/arch/mips/pci/fixup-yosemite.c +++ b/arch/mips/pci/fixup-yosemite.c @@ -26,7 +26,7 @@ #include <linux/init.h> #include <linux/pci.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (pin == 0) return -1; diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index dc35270b65a..f742c51acf0 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -29,83 +29,60 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -/* - * PCI configuration cycle AD bus definition - */ -/* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 +#ifdef CONFIG_LEMOTE_FULONG +#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) +#define ID_SEL_BEGIN 11 +#else +#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) +#define ID_SEL_BEGIN 10 +#endif +#define MAX_DEV_NUM (31 - ID_SEL_BEGIN) -/* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 static int bonito64_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) { - unsigned char busnum = bus->number; + u32 busnum = bus->number; + u32 addr, type; u32 dummy; - u64 pci_addr; - - /* Algorithmics Bonito64 system controller. */ + void *addrp; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int reg = where & ~3; - if ((busnum == 0) && (PCI_SLOT(devfn) > 21)) { - /* We number bus 0 devices from 0..21 */ - return -1; - } - - /* Clear cause register bits */ - BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR | - BONITO_PCICMD_MTABORT_CLR); - - /* - * Setup pattern to be used as PCI "address" for - * Type 0 cycle - */ if (busnum == 0) { - /* IDSEL */ - pci_addr = (u64) 1 << (PCI_SLOT(devfn) + 10); - } else { - /* Bus number */ - pci_addr = busnum << PCI_CFG_TYPE1_BUS_SHF; - - /* Device number */ - pci_addr |= - PCI_SLOT(devfn) << PCI_CFG_TYPE1_DEV_SHF; - } - - /* Function (same for Type 0/1) */ - pci_addr |= PCI_FUNC(devfn) << PCI_CFG_TYPE0_FUNC_SHF; - - /* Register number (same for Type 0/1) */ - pci_addr |= (where & ~0x3) << PCI_CFG_TYPE0_REG_SHF; + /* Type 0 configuration for onboard PCI bus */ + if (device > MAX_DEV_NUM) + return -1; - if (busnum == 0) { - /* Type 0 */ - BONITO_PCIMAP_CFG = pci_addr >> 16; + addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg; + type = 0; } else { - /* Type 1 */ - BONITO_PCIMAP_CFG = (pci_addr >> 16) | 0x10000; + /* Type 1 configuration for offboard PCI bus */ + addr = (busnum << 16) | (device << 11) | (function << 8) | reg; + type = 0x10000; } - pci_addr &= 0xffff; + /* Clear aborts */ + BONITO_PCICMD |= BONITO_PCICMD_MABORT_CLR | BONITO_PCICMD_MTABORT_CLR; + + BONITO_PCIMAP_CFG = (addr >> 16) | type; /* Flush Bonito register block */ dummy = BONITO_PCIMAP_CFG; - iob(); /* sync */ + mmiowb(); - /* Perform access */ + addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { - *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr) = *(u32 *) data; - + writel(cpu_to_le32(*data), addrp); +#ifndef CONFIG_LEMOTE_FULONG /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); +#endif } else { - *(u32 *) data = *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr); + *data = le32_to_cpu(readl(addrp)); } /* Detect Master/Target abort */ @@ -121,6 +98,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type, } return 0; + } diff --git a/arch/mips/pci/ops-marvell.c b/arch/mips/pci/ops-marvell.c deleted file mode 100644 index 1ac5c59199d..00000000000 --- a/arch/mips/pci/ops-marvell.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/marvell.h> - -static int mv_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - struct mv_pci_controller *mvbc = bus->sysdata; - unsigned long address_reg, data_reg; - u32 address; - - address_reg = mvbc->config_addr; - data_reg = mvbc->config_vreg; - - /* Accessing device 31 crashes those Marvells. Since years. - Will they ever make sane controllers ... */ - if (PCI_SLOT(devfn) == 31) - return PCIBIOS_DEVICE_NOT_FOUND; - - address = (bus->number << 16) | (devfn << 8) | - (where & 0xfc) | 0x80000000; - - /* start the configuration cycle */ - MV_WRITE(address_reg, address); - - switch (size) { - case 1: - *val = MV_READ_8(data_reg + (where & 0x3)); - break; - - case 2: - *val = MV_READ_16(data_reg + (where & 0x3)); - break; - - case 4: - *val = MV_READ(data_reg); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int mv_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - struct mv_pci_controller *mvbc = bus->sysdata; - unsigned long address_reg, data_reg; - u32 address; - - address_reg = mvbc->config_addr; - data_reg = mvbc->config_vreg; - - /* Accessing device 31 crashes those Marvells. Since years. - Will they ever make sane controllers ... */ - if (PCI_SLOT(devfn) == 31) - return PCIBIOS_DEVICE_NOT_FOUND; - - address = (bus->number << 16) | (devfn << 8) | - (where & 0xfc) | 0x80000000; - - /* start the configuration cycle */ - MV_WRITE(address_reg, address); - - switch (size) { - case 1: - MV_WRITE_8(data_reg + (where & 0x3), val); - break; - - case 2: - MV_WRITE_16(data_reg + (where & 0x3), val); - break; - - case 4: - MV_WRITE(data_reg, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops mv_pci_ops = { - .read = mv_read_config, - .write = mv_write_config -}; diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c deleted file mode 100644 index a8d38dc8c50..00000000000 --- a/arch/mips/pci/ops-nile4.c +++ /dev/null @@ -1,147 +0,0 @@ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/bootinfo.h> - -#include <asm/lasat/lasat.h> -#include <asm/gt64120.h> -#include <asm/nile4.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#define LO(reg) (reg / 4) -#define HI(reg) (reg / 4 + 1) - -volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE; - -static DEFINE_SPINLOCK(nile4_pci_lock); - -static int nile4_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, int where, u32 * val) -{ - unsigned char busnum = bus->number; - u32 adr, mask, err; - - if ((busnum == 0) && (PCI_SLOT(devfn) > 8)) - /* The addressing scheme chosen leaves room for just - * 8 devices on the first busnum (besides the PCI - * controller itself) */ - return PCIBIOS_DEVICE_NOT_FOUND; - - if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) { - /* Access controller registers directly */ - if (access_type == PCI_ACCESS_WRITE) { - vrc_pciregs[(0x200 + where) >> 2] = *val; - } else { - *val = vrc_pciregs[(0x200 + where) >> 2]; - } - return PCIBIOS_SUCCESSFUL; - } - - /* Temporarily map PCI Window 1 to config space */ - mask = vrc_pciregs[LO(NILE4_PCIINIT1)]; - vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0); - - /* Clear PCI Error register. This also clears the Error Type - * bits in the Control register */ - vrc_pciregs[LO(NILE4_PCIERR)] = 0; - vrc_pciregs[HI(NILE4_PCIERR)] = 0; - - /* Setup address */ - if (busnum == 0) - adr = - KSEG1ADDR(PCI_WINDOW1) + - ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8) - | (where & ~3)); - else - adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) | - (where & ~3); - - if (access_type == PCI_ACCESS_WRITE) - *(u32 *) adr = *val; - else - *val = *(u32 *) adr; - - /* Check for master or target abort */ - err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7; - - /* Restore PCI Window 1 */ - vrc_pciregs[LO(NILE4_PCIINIT1)] = mask; - - if (err) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - unsigned long flags; - u32 data = 0; - int err; - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - spin_lock_irqsave(&nile4_pci_lock, flags); - err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data); - spin_unlock_irqrestore(&nile4_pci_lock, flags); - - if (err) - return err; - - if (size == 1) - *val = (data >> ((where & 3) << 3)) & 0xff; - else if (size == 2) - *val = (data >> ((where & 3) << 3)) & 0xffff; - else - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - unsigned long flags; - u32 data = 0; - int err; - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - spin_lock_irqsave(&nile4_pci_lock, flags); - err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data); - spin_unlock_irqrestore(&nile4_pci_lock, flags); - - if (err) - return err; - - if (size == 1) - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else if (size == 2) - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else - data = val; - - if (nile4_pcibios_config_access - (PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops nile4_pci_ops = { - .read = nile4_pcibios_read, - .write = nile4_pcibios_write, -}; diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c new file mode 100644 index 00000000000..09fa007c1d1 --- /dev/null +++ b/arch/mips/pci/ops-pmcmsp.c @@ -0,0 +1,994 @@ +/* + * PMC-Sierra MSP board specific pci_ops + * + * Copyright 2001 MontaVista Software Inc. + * Copyright 2005-2007 PMC-Sierra, Inc + * + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Much of the code is derived from the original DDB5074 port by + * Geert Uytterhoeven <geert@sonycom.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#define PCI_COUNTERS 1 + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/byteorder.h> +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) +#include <asm/mipsmtregs.h> +#endif + +#include <msp_prom.h> +#include <msp_cic_int.h> +#include <msp_pci.h> +#include <msp_regs.h> +#include <msp_regops.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) +static char proc_init; +extern struct proc_dir_entry *proc_bus_pci_dir; +unsigned int pci_int_count[32]; + +static void pci_proc_init(void); + +/***************************************************************************** + * + * FUNCTION: read_msp_pci_counts + * _________________________________________________________________________ + * + * DESCRIPTION: Prints the count of how many times each PCI + * interrupt has asserted. Can be invoked by the + * /proc filesystem. + * + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused + * + * OUTPUTS: start - new start location + * eof - end of file pointer + * + * RETURNS: len - STDOUT length + * + ****************************************************************************/ +static int read_msp_pci_counts(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int i; + int len = 0; + unsigned int intcount, total = 0; + + for (i = 0; i < 32; ++i) { + intcount = pci_int_count[i]; + if (intcount != 0) { + len += sprintf(page + len, "[%d] = %u\n", i, intcount); + total += intcount; + } + } + + len += sprintf(page + len, "total = %u\n", total); + if (len <= off+count) + *eof = 1; + + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +/***************************************************************************** + * + * FUNCTION: gen_pci_cfg_wr + * _________________________________________________________________________ + * + * DESCRIPTION: Generates a configuration write cycle for debug purposes. + * The IDSEL line asserted and location and data written are + * immaterial. Just want to be able to prove that a + * configuration write can be correctly generated on the + * PCI bus. Intent is that this function by invocable from + * the /proc filesystem. + * + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused + * + * OUTPUTS: start - new start location + * eof - end of file pointer + * + * RETURNS: len - STDOUT length + * + ****************************************************************************/ +static int gen_pci_cfg_wr(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + unsigned char where = 0; /* Write to static Device/Vendor ID */ + unsigned char bus_num = 0; /* Bus 0 */ + unsigned char dev_fn = 0xF; /* Arbitrary device number */ + u32 wr_data = 0xFF00AA00; /* Arbitrary data */ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + int len = 0; + unsigned long value; + int intr; + + len += sprintf(page + len, "PMC MSP PCI: Beginning\n"); + + if (proc_init == 0) { + pci_proc_init(); + proc_init = ~0; + } + + len += sprintf(page + len, "PMC MSP PCI: Before Cfg Wr\n"); + + /* + * Generate PCI Configuration Write Cycle + */ + + /* Clear cause register bits */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + + /* Setup address that is to appear on PCI bus */ + preg->config_addr = BPCI_CFGADDR_ENABLE | + (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | + (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | + (where & 0xFC); + + value = cpu_to_le32(wr_data); + + /* Launch the PCI configuration write cycle */ + *PCI_CONFIG_SPACE_REG = value; + + /* + * Check if the PCI configuration cycle (rd or wr) succeeded, by + * checking the status bits for errors like master or target abort. + */ + intr = preg->if_status; + + len += sprintf(page + len, "PMC MSP PCI: After Cfg Wr\n"); + + /* Handle STDOUT calculations */ + if (len <= off+count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +/***************************************************************************** + * + * FUNCTION: pci_proc_init + * _________________________________________________________________________ + * + * DESCRIPTION: Create entries in the /proc filesystem for debug access. + * + * INPUTS: none + * + * OUTPUTS: none + * + * RETURNS: none + * + ****************************************************************************/ +static void pci_proc_init(void) +{ + create_proc_read_entry("pmc_msp_pci_rd_cnt", 0, NULL, + read_msp_pci_counts, NULL); + create_proc_read_entry("pmc_msp_pci_cfg_wr", 0, NULL, + gen_pci_cfg_wr, NULL); +} +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + +spinlock_t bpci_lock = SPIN_LOCK_UNLOCKED; + +/***************************************************************************** + * + * STRUCT: pci_io_resource + * _________________________________________________________________________ + * + * DESCRIPTION: Defines the address range that pciauto() will use to + * assign to the I/O BARs of PCI devices. + * + * Use the start and end addresses of the MSP7120 PCI Host + * Controller I/O space, in the form that they appear on the + * PCI bus AFTER MSP7120 has performed address translation. + * + * For I/O accesses, MSP7120 ignores OATRAN and maps I/O + * accesses into the bottom 0xFFF region of address space, + * so that is the range to put into the pci_io_resource + * struct. + * + * In MSP4200, the start address was 0x04 instead of the + * expected 0x00. Will just assume there was a good reason + * for this! + * + * NOTES: Linux, by default, will assign I/O space to the lowest + * region of address space. Since MSP7120 and Linux, + * by default, have no offset in between how they map, the + * io_offset element of pci_controller struct should be set + * to zero. + * ELEMENTS: + * name - String used for a meaningful name. + * + * start - Start address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. + * + * end - End address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. + * + * flags - Attributes indicating the type of resource. In this case, + * indicate I/O space. + * + ****************************************************************************/ +static struct resource pci_io_resource = { + .name = "pci IO space", + .start = 0x04, + .end = 0x0FFF, + .flags = IORESOURCE_IO /* I/O space */ +}; + +/***************************************************************************** + * + * STRUCT: pci_mem_resource + * _________________________________________________________________________ + * + * DESCRIPTION: Defines the address range that pciauto() will use to + * assign to the memory BARs of PCI devices. + * + * The .start and .end values are dependent upon how address + * translation is performed by the OATRAN regiser. + * + * The values to use for .start and .end are the values + * in the form they appear on the PCI bus AFTER MSP7120 has + * performed OATRAN address translation. + * + * ELEMENTS: + * name - String used for a meaningful name. + * + * start - Start address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. + * + * end - End address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. + * + * flags - Attributes indicating the type of resource. In this case, + * indicate memory space. + * + ****************************************************************************/ +static struct resource pci_mem_resource = { + .name = "pci memory space", + .start = MSP_PCI_SPACE_BASE, + .end = MSP_PCI_SPACE_END, + .flags = IORESOURCE_MEM /* memory space */ +}; + +/***************************************************************************** + * + * FUNCTION: bpci_interrupt + * _________________________________________________________________________ + * + * DESCRIPTION: PCI status interrupt handler. Updates the count of how + * many times each status bit has been set, then clears + * the status bits. If the appropriate macros are defined, + * these counts can be viewed via the /proc filesystem. + * + * INPUTS: irq - unused + * dev_id - unused + * pt_regs - unused + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * + ****************************************************************************/ +static int bpci_interrupt(int irq, void *dev_id) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + unsigned int stat = preg->if_status; + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) + int i; + for (i = 0; i < 32; ++i) { + if ((1 << i) & stat) + ++pci_int_count[i]; + } +#endif /* PROC_FS && PCI_COUNTERS */ + + /* printk("PCI ISR: Status=%08X\n", stat); */ + + /* write to clear all asserted interrupts */ + preg->if_status = stat; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_config_access + * _________________________________________________________________________ + * + * DESCRIPTION: Performs a PCI configuration access (rd or wr), then + * checks that the access succeeded by querying MSP7120's + * PCI status bits. + * + * INPUTS: + * access_type - kind of PCI configuration cycle to perform + * (read or write). Legal values are + * PCI_ACCESS_WRITE and PCI_ACCESS_READ. + * + * bus - pointer to the bus number of the device to + * be targetted for the configuration cycle. + * The only element of the pci_bus structure + * used is bus->number. This argument determines + * if the configuration access will be Type 0 or + * Type 1. Since MSP7120 assumes itself to be the + * PCI Host, any non-zero bus->number generates + * a Type 1 access. + * + * devfn - this is an 8-bit field. The lower three bits + * specify the function number of the device to + * be targetted for the configuration cycle, with + * all three-bit combinations being legal. The + * upper five bits specify the device number, + * with legal values being 10 to 31. + * + * where - address within the Configuration Header + * space to access. + * + * data - for write accesses, contains the data to + * write. + * + * OUTPUTS: + * data - for read accesses, contains the value read. + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - access failure + * + ****************************************************************************/ +int msp_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, + unsigned int devfn, + unsigned char where, + u32 *data) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + unsigned char bus_num = bus->number; + unsigned char dev_fn = (unsigned char)devfn; + unsigned long flags; + unsigned long intr; + unsigned long value; + static char pciirqflag; +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + unsigned int vpe_status; +#endif + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) + if (proc_init == 0) { + pci_proc_init(); + proc_init = ~0; + } +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + + /* + * Just the first time this function invokes, allocate + * an interrupt line for PCI host status interrupts. The + * allocation assigns an interrupt handler to the interrupt. + */ + if (pciirqflag == 0) { + request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ + bpci_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "PMC MSP PCI Host", + preg); + pciirqflag = ~0; + } + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + local_irq_save(flags); + vpe_status = dvpe(); +#else + spin_lock_irqsave(&bpci_lock, flags); +#endif + + /* + * Clear PCI cause register bits. + * + * In Polo, the PCI Host had a dedicated DMA called the + * Block Copy (not to be confused with the general purpose Block + * Copy Engine block). There appear to have been special interrupts + * for this Block Copy, called Block Copy 0 Fault (BC0F) and + * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this + * dedicated Block Copy block, so these two interrupts are now + * marked reserved. In case the Block Copy is resurrected in a + * future design, maintain the code that treats these two interrupts + * specially. + * + * Write to clear all interrupts in the PCI status register, aside + * from BC0F and BC1F. + */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + + /* Setup address that is to appear on PCI bus */ + preg->config_addr = BPCI_CFGADDR_ENABLE | + (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | + (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | + (where & 0xFC); + + /* IF access is a PCI configuration write */ + if (access_type == PCI_ACCESS_WRITE) { + value = cpu_to_le32(*data); + *PCI_CONFIG_SPACE_REG = value; + } else { + /* ELSE access is a PCI configuration read */ + value = le32_to_cpu(*PCI_CONFIG_SPACE_REG); + *data = value; + } + + /* + * Check if the PCI configuration cycle (rd or wr) succeeded, by + * checking the status bits for errors like master or target abort. + */ + intr = preg->if_status; + + /* Clear config access */ + preg->config_addr = 0; + + /* IF error occurred */ + if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) { + /* Clear status bits */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + evpe(vpe_status); + local_irq_restore(flags); +#else + spin_unlock_irqrestore(&bpci_lock, flags); +#endif + + return -1; + } + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + evpe(vpe_status); + local_irq_restore(flags); +#else + spin_unlock_irqrestore(&bpci_lock, flags); +#endif + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_byte + * _________________________________________________________________________ + * + * DESCRIPTION: Read a byte from PCI configuration address spac + * Since the hardware can't address 8 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_byte(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = (data >> ((where & 3) << 3)) & 0x0ff; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_word + * _________________________________________________________________________ + * + * DESCRIPTION: Read a word (16 bits) from PCI configuration address space. + * Since the hardware can't address 16 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_word(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* if (where & 1) */ /* Commented out non-compliant code. + * Should allow word access to configuration + * registers, with only exception being when + * the word access would wrap around into + * the next dword. + */ + if ((where & 3) == 3) { + *val = 0xFFFFFFFF; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = (data >> ((where & 3) << 3)) & 0x0ffff; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_dword + * _________________________________________________________________________ + * + * DESCRIPTION: Read a double word (32 bits) from PCI configuration + * address space. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_dword(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* Address must be dword aligned. */ + if (where & 3) { + *val = 0xFFFFFFFF; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_byte + * _________________________________________________________________________ + * + * DESCRIPTION: Write a byte to PCI configuration address space. + * Since the hardware can't address 8 bit chunks + * directly, a read-modify-write is performed. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_byte(struct pci_bus *bus, + unsigned int devfn, + int where, + u8 val) +{ + u32 data = 0; + + /* read config space */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + /* modify the byte within the dword */ + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + /* write back the full dword */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_word + * _________________________________________________________________________ + * + * DESCRIPTION: Write a word (16-bits) to PCI configuration address space. + * Since the hardware can't address 16 bit chunks + * directly, a read-modify-write is performed. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_word(struct pci_bus *bus, + unsigned int devfn, + int where, + u16 val) +{ + u32 data = 0; + + /* Fixed non-compliance: if (where & 1) */ + if ((where & 3) == 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + /* read config space */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + /* modify the word within the dword */ + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + /* write back the full dword */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_dword + * _________________________________________________________________________ + * + * DESCRIPTION: Write a double word (32-bits) to PCI configuration address + * space. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_dword(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 val) +{ + /* check that address is dword aligned */ + if (where & 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + /* perform write */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config + * _________________________________________________________________________ + * + * DESCRIPTION: Interface the PCI configuration read request with + * the appropriate function, based on how many bytes + * the read request is. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * + * OUTPUTS val - value read, with any extraneous bytes masked + * to zero. + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure + * + ****************************************************************************/ +int +msp_pcibios_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 *val) +{ + if (size == 1) { + if (msp_pcibios_read_config_byte(bus, devfn, where, val)) { + return -1; + } + } else if (size == 2) { + if (msp_pcibios_read_config_word(bus, devfn, where, val)) { + return -1; + } + } else if (size == 4) { + if (msp_pcibios_read_config_dword(bus, devfn, where, val)) { + return -1; + } + } else { + *val = 0xFFFFFFFF; + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config + * _________________________________________________________________________ + * + * DESCRIPTION: Interface the PCI configuration write request with + * the appropriate function, based on how many bytes + * the read request is. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * val - value to write + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure + * + ****************************************************************************/ +int +msp_pcibios_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 val) +{ + if (size == 1) { + if (msp_pcibios_write_config_byte(bus, devfn, + where, (u8)(0xFF & val))) { + return -1; + } + } else if (size == 2) { + if (msp_pcibios_write_config_word(bus, devfn, + where, (u16)(0xFFFF & val))) { + return -1; + } + } else if (size == 4) { + if (msp_pcibios_write_config_dword(bus, devfn, where, val)) { + return -1; + } + } else { + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * STRUCTURE: msp_pci_ops + * _________________________________________________________________________ + * + * DESCRIPTION: structure to abstract the hardware specific PCI + * configuration accesses. + * + * ELEMENTS: + * read - function for Linux to generate PCI Configuration reads. + * write - function for Linux to generate PCI Configuration writes. + * + ****************************************************************************/ +struct pci_ops msp_pci_ops = { + .read = msp_pcibios_read_config, + .write = msp_pcibios_write_config +}; + +/***************************************************************************** + * + * STRUCTURE: msp_pci_controller + * _________________________________________________________________________ + * + * Describes the attributes of the MSP7120 PCI Host Controller + * + * ELEMENTS: + * pci_ops - abstracts the hardware specific PCI configuration + * accesses. + * + * mem_resource - address range pciauto() uses to assign to PCI device + * memory BARs. + * + * mem_offset - offset between how MSP7120 outbound PCI memory + * transaction addresses appear on the PCI bus and how Linux + * wants to configure memory BARs of the PCI devices. + * MSP7120 does nothing funky, so just set to zero. + * + * io_resource - address range pciauto() uses to assign to PCI device + * I/O BARs. + * + * io_offset - offset between how MSP7120 outbound PCI I/O + * transaction addresses appear on the PCI bus and how + * Linux defaults to configure I/O BARs of the PCI devices. + * MSP7120 maps outbound I/O accesses into the bottom + * bottom 4K of PCI address space (and ignores OATRAN). + * Since the Linux default is to configure I/O BARs to the + * bottom 4K, no special offset is needed. Just set to zero. + * + ****************************************************************************/ +static struct pci_controller msp_pci_controller = { + .pci_ops = &msp_pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0, + .io_resource = &pci_io_resource, + .io_offset = 0 +}; + +/***************************************************************************** + * + * FUNCTION: msp_pci_init + * _________________________________________________________________________ + * + * DESCRIPTION: Initialize the PCI Host Controller and register it with + * Linux so Linux can seize control of the PCI bus. + * + ****************************************************************************/ +void __init msp_pci_init(void) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + u32 id; + + /* Extract Device ID */ + id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12; + + /* Check if JTAG ID identifies MSP7120 */ + if (!MSP_HAS_PCI(id)) { + printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id); + goto no_pci; + } + + /* + * Enable flushing of the PCI-SDRAM queue upon a read + * of the SDRAM's Memory Configuration Register. + */ + *(unsigned long *)QFLUSH_REG_1 = 3; + + /* Configure PCI Host Controller. */ + preg->if_status = ~0; /* Clear cause register bits */ + preg->config_addr = 0; /* Clear config access */ + preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */ + preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */ + + /* configure so inb(), outb(), and family are functional */ + set_io_port_base(MSP_PCI_IOSPACE_BASE); + + /* Tell Linux the details of the MSP7120 PCI Host Controller */ + register_pci_controller(&msp_pci_controller); + + return; + +no_pci: + /* Disable PCI channel */ + printk(KERN_WARNING "PCI: no host PCI bus detected\n"); +} diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c index 44500708451..a450c406203 100644 --- a/arch/mips/pci/ops-tx4938.c +++ b/arch/mips/pci/ops-tx4938.c @@ -46,50 +46,63 @@ struct resource tx4938_pcic1_pci_mem_resource = { .flags = IORESOURCE_MEM }; -static int mkaddr(int bus, int dev_fn, int where, int *flagsp) +static int mkaddr(int bus, int dev_fn, int where, + struct tx4938_pcic_reg *pcicptr) { if (bus > 0) { /* Type 1 configuration */ - tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | + pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; } else { if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0)) return -1; /* Type 0 configuration */ - tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | + pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | ((dev_fn & 0xff) << 0x08) | (where & 0xfc); } /* clear M_ABORT and Disable M_ABORT Int. */ - tx4938_pcicptr->pcistatus = - (tx4938_pcicptr->pcistatus & 0x0000ffff) | + pcicptr->pcistatus = + (pcicptr->pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16); - tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; + pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; return 0; } -static int check_abort(int flags) +static int check_abort(struct tx4938_pcic_reg *pcicptr) { int code = PCIBIOS_SUCCESSFUL; /* wait write cycle completion before checking error status */ - while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) + while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) ; - if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - tx4938_pcicptr->pcistatus = - (tx4938_pcicptr-> + if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + pcicptr->pcistatus = + (pcicptr-> pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16); - tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; + pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; code = PCIBIOS_DEVICE_NOT_FOUND; } return code; } +extern struct pci_controller tx4938_pci_controller[]; +extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch); + +static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus) +{ + struct pci_controller *channel = bus->sysdata; + return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]); +} + static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int flags, retval, dev, busno, func; + int retval, dev, busno, func; + struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); + void __iomem *cfgdata = + (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; dev = PCI_SLOT(devfn); func = PCI_FUNC(devfn); @@ -101,32 +114,32 @@ static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, busno = 0; } - if (mkaddr(busno, devfn, where, &flags)) + if (mkaddr(busno, devfn, where, pcicptr)) return -1; switch (size) { case 1: - *val = *(volatile u8 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 3) ^ 3)); + cfgdata += (where & 3) ^ 3; #else - (where & 3)); + cfgdata += where & 3; #endif + *val = __raw_readb(cfgdata); break; case 2: - *val = *(volatile u16 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 3) ^ 2)); + cfgdata += (where & 2) ^ 2; #else - (where & 3)); + cfgdata += where & 2; #endif + *val = __raw_readw(cfgdata); break; case 4: - *val = tx4938_pcicptr->g2pcfgdata; + *val = __raw_readl(cfgdata); break; } - retval = check_abort(flags); + retval = check_abort(pcicptr); if (retval == PCIBIOS_DEVICE_NOT_FOUND) *val = 0xffffffff; @@ -136,7 +149,10 @@ static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int flags, dev, busno, func; + int dev, busno, func; + struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); + void __iomem *cfgdata = + (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; busno = bus->number; dev = PCI_SLOT(devfn); @@ -149,32 +165,32 @@ static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, busno = 0; } - if (mkaddr(busno, devfn, where, &flags)) + if (mkaddr(busno, devfn, where, pcicptr)) return -1; switch (size) { case 1: - *(volatile u8 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 3) ^ 3)) = val; + cfgdata += (where & 3) ^ 3; #else - (where & 3)) = val; + cfgdata += where & 3; #endif + __raw_writeb(val, cfgdata); break; case 2: - *(volatile u16 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 0x3) ^ 0x2)) = val; + cfgdata += (where & 2) ^ 2; #else - (where & 3)) = val; + cfgdata += where & 2; #endif + __raw_writew(val, cfgdata); break; case 4: - tx4938_pcicptr->g2pcfgdata = val; + __raw_writel(val, cfgdata); break; } - return check_abort(flags); + return check_abort(pcicptr); } struct pci_ops tx4938_pci_ops = { diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index d7b9e1349f6..2b4e30c7d10 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -74,8 +74,9 @@ static inline void WRITECFG32(u32 addr, u32 data) *(u32 *)(cfg_space + (addr & ~3)) = data; } -int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { + This is b0rked. return dev->irq; } diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c deleted file mode 100644 index 0f0ea1b7d4d..00000000000 --- a/arch/mips/pci/pci-dac.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org> - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ - -#include <linux/types.h> -#include <linux/dma-mapping.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <asm/cache.h> -#include <asm/io.h> - -#include <dma-coherence.h> - -#include <linux/pci.h> - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - struct device *dev = &pdev->dev; - - BUG_ON(direction == DMA_NONE); - - if (!plat_device_is_coherent(dev)) { - unsigned long addr; - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, PAGE_SIZE); - } - - return plat_map_dma_mem_page(dev, page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - if (!plat_device_is_coherent(&pdev->dev)) - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - if (!plat_device_is_coherent(&pdev->dev)) - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/mips/pci/pci-ddb5477.c b/arch/mips/pci/pci-ddb5477.c index d071bc375b1..7363e187784 100644 --- a/arch/mips/pci/pci-ddb5477.c +++ b/arch/mips/pci/pci-ddb5477.c @@ -131,7 +131,7 @@ static unsigned char rockhopperII_irq_map[MAX_SLOT_NUM] = { /* SLOT: 20, AD:31 */ VRC5477_IRQ_IOPCI_INTA, /* vrc5477 usb host */ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int slot_num; unsigned char *slot_irq_map; diff --git a/arch/mips/pci/pci-ev64120.c b/arch/mips/pci/pci-ev64120.c deleted file mode 100644 index a84f594b5a1..00000000000 --- a/arch/mips/pci/pci-ev64120.c +++ /dev/null @@ -1,22 +0,0 @@ -#include <linux/pci.h> -#include <asm/irq.h> - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - if (!pin) - return 0; - - irq = allocate_irqno(); - if (irq < 0) - return 0; - - return irq; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 405ce015273..a322543ac34 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -134,7 +134,7 @@ int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid) * A given PCI device, in general, should be able to intr any of the cpus * on any one of the hubs connected to its xbow. */ -int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); int irq = bc->pci_int[slot]; diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c deleted file mode 100644 index 985784a3e6f..00000000000 --- a/arch/mips/pci/pci-lasat.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000, 2001, 04 Keith M Wesolowski - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/types.h> -#include <asm/bootinfo.h> - -extern struct pci_ops nile4_pci_ops; -extern struct pci_ops gt64xxx_pci0_ops; -static struct resource lasat_pci_mem_resource = { - .name = "LASAT PCI MEM", - .start = 0x18000000, - .end = 0x19ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct resource lasat_pci_io_resource = { - .name = "LASAT PCI IO", - .start = 0x1a000000, - .end = 0x1bffffff, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller lasat_pci_controller = { - .mem_resource = &lasat_pci_mem_resource, - .io_resource = &lasat_pci_io_resource, -}; - -static int __init lasat_pci_setup(void) -{ - printk("PCI: starting\n"); - - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_pci_controller.pci_ops = >64xxx_pci0_ops; - break; - case MACH_LASAT_200: - lasat_pci_controller.pci_ops = &nile4_pci_ops; - break; - default: - panic("pcibios_init: mips_machtype incorrect"); - } - - register_pci_controller(&lasat_pci_controller); - - return 0; -} - -arch_initcall(lasat_pci_setup); - -#define LASATINT_ETH1 0 -#define LASATINT_ETH0 1 -#define LASATINT_HDC 2 -#define LASATINT_COMP 3 -#define LASATINT_HDLC 4 -#define LASATINT_PCIA 5 -#define LASATINT_PCIB 6 -#define LASATINT_PCIC 7 -#define LASATINT_PCID 8 - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { - case 1: - case 2: - case 3: - return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4); - case 4: - return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */ - case 5: - return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */ - case 6: - return LASATINT_HDC; /* IDE controller */ - default: - return 0xff; /* Illegal */ - } - - return -1; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c deleted file mode 100644 index 027759f7c90..00000000000 --- a/arch/mips/pci/pci-ocelot-c.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org) - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/mv643xx.h> - -#include <linux/init.h> - -#include <asm/marvell.h> - -/* - * We assume the address ranges have already been setup appropriately by - * the firmware. PMON in case of the Ocelot C does that. - */ -static struct resource mv_pci_io_mem0_resource = { - .name = "MV64340 PCI0 IO MEM", - .flags = IORESOURCE_IO -}; - -static struct resource mv_pci_mem0_resource = { - .name = "MV64340 PCI0 MEM", - .flags = IORESOURCE_MEM -}; - -static struct mv_pci_controller mv_bus0_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem0_resource, - .io_resource = &mv_pci_io_mem0_resource, - }, - .config_addr = MV64340_PCI_0_CONFIG_ADDR, - .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, -}; - -static uint32_t mv_io_base, mv_io_size; - -static void mv64340_pci0_init(void) -{ - uint32_t mem0_base, mem0_size; - uint32_t io_base, io_size; - - io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16; - io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16; - mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16; - mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16; - - mv_pci_io_mem0_resource.start = 0; - mv_pci_io_mem0_resource.end = io_size - 1; - mv_pci_mem0_resource.start = mem0_base; - mv_pci_mem0_resource.end = mem0_base + mem0_size - 1; - mv_bus0_controller.pcic.mem_offset = mem0_base; - mv_bus0_controller.pcic.io_offset = 0; - - ioport_resource.end = io_size - 1; - - register_pci_controller(&mv_bus0_controller.pcic); - - mv_io_base = io_base; - mv_io_size = io_size; -} - -static struct resource mv_pci_io_mem1_resource = { - .name = "MV64340 PCI1 IO MEM", - .flags = IORESOURCE_IO -}; - -static struct resource mv_pci_mem1_resource = { - .name = "MV64340 PCI1 MEM", - .flags = IORESOURCE_MEM -}; - -static struct mv_pci_controller mv_bus1_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem1_resource, - .io_resource = &mv_pci_io_mem1_resource, - }, - .config_addr = MV64340_PCI_1_CONFIG_ADDR, - .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, -}; - -static __init void mv64340_pci1_init(void) -{ - uint32_t mem0_base, mem0_size; - uint32_t io_base, io_size; - - io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16; - io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16; - mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16; - mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16; - - /* - * Here we assume the I/O window of second bus to be contiguous with - * the first. A gap is no problem but would waste address space for - * remapping the port space. - */ - mv_pci_io_mem1_resource.start = mv_io_size; - mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1; - mv_pci_mem1_resource.start = mem0_base; - mv_pci_mem1_resource.end = mem0_base + mem0_size - 1; - mv_bus1_controller.pcic.mem_offset = mem0_base; - mv_bus1_controller.pcic.io_offset = 0; - - ioport_resource.end = io_base + io_size -mv_io_base - 1; - - register_pci_controller(&mv_bus1_controller.pcic); - - mv_io_size = io_base + io_size - mv_io_base; -} - -static __init int __init ocelot_c_pci_init(void) -{ - unsigned long io_v_base; - uint32_t enable; - - enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE); - - /* - * We require at least one enabled I/O or PCI memory window or we - * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3. - */ - if (enable & (0x01 << 9) || enable & (0x01 << 10)) - mv64340_pci0_init(); - - if (enable & (0x01 << 14) || enable & (0x01 << 15)) - mv64340_pci1_init(); - - if (mv_io_size) { - io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size); - if (!io_v_base) - panic("Could not ioremap I/O port range"); - - set_io_port_base(io_v_base); - } - - return 0; -} - -arch_initcall(ocelot_c_pci_init); diff --git a/arch/mips/pci/pci-ocelot.c b/arch/mips/pci/pci-ocelot.c index 7f94f26d35a..1421d34535e 100644 --- a/arch/mips/pci/pci-ocelot.c +++ b/arch/mips/pci/pci-ocelot.c @@ -71,19 +71,19 @@ static inline void pci0WriteConfigReg(unsigned int offset, unsigned int data) } static struct resource ocelot_mem_resource = { - start = GT_PCI_MEM_BASE; - end = GT_PCI_MEM_BASE + GT_PCI_MEM_BASE - 1; + .start = GT_PCI_MEM_BASE, + .end = GT_PCI_MEM_BASE + GT_PCI_MEM_BASE - 1, }; static struct resource ocelot_io_resource = { - start = GT_PCI_IO_BASE; - end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1; + .start = GT_PCI_IO_BASE, + .end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1, }; static struct pci_controller ocelot_pci_controller = { - .pci_ops = gt64xxx_pci0_ops; - .mem_resource = &ocelot_mem_resource; - .io_resource = &ocelot_io_resource; + .pci_ops = gt64xxx_pci0_ops, + .mem_resource = &ocelot_mem_resource, + .io_resource = &ocelot_io_resource, }; static int __init ocelot_pcibios_init(void) diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 75c1246ced5..c1ac6493155 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -84,7 +84,7 @@ static inline void WRITECFG32(u32 addr, u32 data) *(u32 *) (cfg_space + (addr & ~3)) = data; } -int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return dev->irq; } diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 8108231f2e2..99d8f4fd3ff 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -269,7 +269,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - struct pci_dev *dev = pci_dev_b(ln); + dev = pci_dev_b(ln); if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) pcibios_fixup_device_resources(dev, bus); |