aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/sibyte/bcm1480/time.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sibyte/bcm1480/time.c')
-rw-r--r--arch/mips/sibyte/bcm1480/time.c117
1 files changed, 50 insertions, 67 deletions
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
index c730744aa47..610f0253954 100644
--- a/arch/mips/sibyte/bcm1480/time.c
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -15,22 +15,12 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-
-/*
- * These are routines to set up and handle interrupts from the
- * bcm1480 general purpose timer 0. We're using the timer as a
- * system clock, so we set it up to run at 100 Hz. On every
- * interrupt, we update our idea of what the time of day is,
- * then call do_timer() in the architecture-independent kernel
- * code to do general bookkeeping (e.g. update jiffies, run
- * bottom halves, etc.)
- */
#include <linux/clockchips.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/percpu.h>
#include <linux/spinlock.h>
-#include <asm/irq.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
@@ -47,33 +37,10 @@
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
-#ifdef CONFIG_SIMULATION
-#define BCM1480_HPT_VALUE 50000
-#else
-#define BCM1480_HPT_VALUE 1000000
-#endif
-
extern int bcm1480_steal_irq(int irq);
-void __init plat_time_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
- BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
-
- bcm1480_mask_irq(cpu, irq);
-
- /* Map the timer interrupt to ip[4] of this cpu */
- __raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
- + (irq<<3)));
-
- bcm1480_unmask_irq(cpu, irq);
- bcm1480_steal_irq(irq);
-}
-
/*
- * The general purpose timer ticks at 1 Mhz independent if
+ * The general purpose timer ticks at 1MHz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
@@ -88,7 +55,7 @@ static void sibyte_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, timer_cfg);
- __raw_writeq(BCM1480_HPT_VALUE / HZ - 1, timer_init);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
break;
@@ -121,80 +88,96 @@ static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
return res;
}
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ struct clock_event_device *cd = dev_id;
+ void __iomem *timer_cfg;
+
+ timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ timer_cfg);
cd->event_handler(cd);
return IRQ_HANDLED;
}
-static struct irqaction sibyte_counter_irqaction = {
- .handler = sibyte_counter_handler,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-/*
- * This interrupt is "special" in that it doesn't use the request_irq
- * way to hook the irq line. The timer interrupt is initialized early
- * enough to make this a major pain, and it's also firing enough to
- * warrant a bit of special case code. bcm1480_timer_interrupt is
- * called directly from irq_handler.S when IP[4] is set during an
- * interrupt
- */
void __cpuinit sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
- cd->name = "bcm1480-counter";
+ sprintf(name, "bcm1480-counter %d", cpu);
+ cd->name = name;
cd->features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_MODE_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = sibyte_next_event;
cd->set_mode = sibyte_set_mode;
- cd->irq = irq;
- clockevent_set_clock(cd, BCM1480_HPT_VALUE);
+ clockevents_register_device(cd);
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /*
+ * Map timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
- setup_irq(irq, &sibyte_counter_irqaction);
+ bcm1480_unmask_irq(cpu, irq);
+ bcm1480_steal_irq(irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
}
static cycle_t bcm1480_hpt_read(void)
{
- /* We assume this function is called xtime_lock held. */
- unsigned long count =
- __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
- return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
+ return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
}
struct clocksource bcm1480_clocksource = {
- .name = "MIPS",
+ .name = "zbbus-cycles",
.rating = 200,
.read = bcm1480_hpt_read,
- .mask = CLOCKSOURCE_MASK(32),
- .shift = 32,
+ .mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1480_clocksource_init(void)
{
struct clocksource *cs = &bcm1480_clocksource;
+ unsigned int plldiv;
+ unsigned long zbbus;
- clocksource_set_clock(cs, BCM1480_HPT_VALUE);
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
+ clocksource_set_clock(cs, zbbus);
clocksource_register(cs);
}
-void __init bcm1480_hpt_setup(void)
+void __init plat_time_init(void)
{
- mips_hpt_frequency = BCM1480_HPT_VALUE;
sb1480_clocksource_init();
sb1480_clockevent_init();
}