1 files changed, 0 insertions, 106 deletions
diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S
deleted file mode 100644
index 2cdc09f55f1..00000000000
--- a/arch/mips/sni/int-handler.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * SNI RM200 PCI specific interrupt handler code.
- *
- * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/sni.h>
-#include <asm/stackframe.h>
-
-/*
- * The PCI ASIC has the nasty property that it may delay writes if it is busy.
- * As a consequence from writes that have not graduated when we exit from the
- * interrupt handler we might catch a spurious interrupt.  To avoid this we
- * force the PCI ASIC to graduate all writes by executing a read from the
- * PCI bus.
- */
-		.set	noreorder
-		.set	noat
-		.align	5
-		NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-
-		/* Blinken light ...  */
-		lb	t0, led_cache
-		addiu	t0, 1
-		sb	t0, led_cache
-		sb	t0, PCIMT_CSLED			# write only register
-		.data
-led_cache:	.byte	0
-		.text
-
-		mfc0	t0, CP0_STATUS
-		mfc0	t1, CP0_CAUSE
-		and	t0, t1
-
-		 andi	t1, t0, 0x0800			# hardware interrupt 1
-		bnez	t1, _hwint1
-		 andi	t1, t0, 0x4000			# hardware interrupt 4
-		bnez	t1, _hwint4
-		 andi	t1, t0, 0x2000			# hardware interrupt 3
-		bnez	t1, _hwint3
-		 andi	t1, t0, 0x1000			# hardware interrupt 2
-		bnez	t1, _hwint2
-		 andi	t1, t0, 0x8000			# hardware interrupt 5
-		bnez	t1, _hwint5
-		 andi	t1, t0, 0x0400			# hardware interrupt 0
-		bnez	t1, _hwint0
-		 nop
-
-		j	restore_all			# spurious interrupt
-		 nop
-
- ##############################################################################
-
-/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
-   button interrupts.  */
-_hwint0:	jal	pciasic_hwint0
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts
- */
-_hwint1:	jal	pciasic_hwint1
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-
-/*
- * This interrupt was used for the com1 console on the first prototypes;
- * it's unsed otherwise
- */
-_hwint2:	jal	pciasic_hwint2
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 3 are the PCI interrupts A - D
- */
-_hwint3:	jal	pciasic_hwint3
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-_hwint4:	jal	pciasic_hwint4
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/* hwint5 is the r4k count / compare interrupt  */
-_hwint5:	jal	pciasic_hwint5
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-		END(sni_rm200_pci_handle_int)