diff options
Diffstat (limited to 'arch/mips')
90 files changed, 4090 insertions, 988 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b905744d791..f4af967a6b3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -238,21 +238,8 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MARKEINS - bool "NEC EMMA2RH Mark-eins" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_CPU_R5000 - help - This enables support for the R5432-based NEC Mark-eins - boards with R5500 CPU. +config MACH_EMMA + bool "NEC EMMA series based machines" config MACH_VR41XX bool "NEC VR4100 series based machines" @@ -261,6 +248,19 @@ config MACH_VR41XX select SYS_HAS_CPU_VR41XX select GENERIC_HARDIRQS_NO__DO_IRQ +config NXP_STB220 + bool "NXP STB220 board" + select SOC_PNX833X + help + Support for NXP Semiconductors STB220 Development Board. + +config NXP_STB225 + bool "NXP 225 board" + select SOC_PNX833X + select SOC_PNX8335 + help + Support for NXP Semiconductors STB225 Development Board. + config PNX8550_JBS bool "NXP PNX8550 based JBS board" select PNX8550 @@ -327,7 +327,6 @@ config SGI_IP22 select IP22_CPU_SCACHE select IRQ_CPU select GENERIC_ISA_DMA_SUPPORT_BROKEN - select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG select SGI_HAS_HAL2 @@ -382,7 +381,6 @@ config SGI_IP28 select HW_HAS_EISA select I8253 select I8259 - select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG select SGI_HAS_HAL2 @@ -601,6 +599,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" +source "arch/mips/emma/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -849,6 +848,24 @@ config MIPS_RM9122 bool select SERIAL_RM9000 +config SOC_PNX833X + bool + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select DMA_NONCOHERENT + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_GPIO + select CPU_MIPSR2_IRQ_VI + +config SOC_PNX8335 + bool + select SOC_PNX833X + config PNX8550 bool select SOC_PNX8550 @@ -874,9 +891,6 @@ config EMMA2RH config SERIAL_RM9000 bool -config SGI_HAS_DS1286 - bool - config SGI_HAS_INDYDOG bool @@ -1092,6 +1106,16 @@ config CPU_R5432 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL +config CPU_R5500 + bool "R5500" + depends on SYS_HAS_CPU_R5500 + select CPU_HAS_LLSC + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + help + NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV + instruction set. + config CPU_R6000 bool "R6000" depends on EXPERIMENTAL @@ -1202,6 +1226,9 @@ config SYS_HAS_CPU_R5000 config SYS_HAS_CPU_R5432 bool +config SYS_HAS_CPU_R5500 + bool + config SYS_HAS_CPU_R6000 bool @@ -1885,6 +1912,8 @@ config PROBE_INITRD_HEADER add initrd or initramfs image to the kernel image. Otherwise, say N. +source "kernel/Kconfig.freezer" + menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_EISA diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 7f39fd8a91f..28c55f60891 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_ cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -Wa,--trap +cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ + -Wa,--trap cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ @@ -381,6 +383,14 @@ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 # load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 +# NXP STB225 +core-$(CONFIG_SOC_PNX833X) += arch/mips/nxp/pnx833x/common/ +cflags-$(CONFIG_SOC_PNX833X) += -Iarch/mips/include/asm/mach-pnx833x +libs-$(CONFIG_NXP_STB220) += arch/mips/nxp/pnx833x/stb22x/ +load-$(CONFIG_NXP_STB220) += 0xffffffff80001000 +libs-$(CONFIG_NXP_STB225) += arch/mips/nxp/pnx833x/stb22x/ +load-$(CONFIG_NXP_STB225) += 0xffffffff80001000 + # # Common NXP PNX8550 # @@ -399,14 +409,17 @@ load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 libs-$(CONFIG_PNX8550_STB810) += arch/mips/nxp/pnx8550/stb810/ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 -# NEC EMMA2RH boards # -core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/ -cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh +# Common NEC EMMAXXX +# +core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/ +cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh +# # NEC EMMA2RH Mark-eins -core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/ -load-$(CONFIG_MARKEINS) += 0xffffffff88100000 +# +core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/ +load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 # # SGI IP22 (Indy/Indigo2) diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index dc8a67efac2..5c76c6448e0 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -17,6 +17,8 @@ #include <linux/init.h> #include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1100_mmc.h> #define PORT(_base, _irq) \ { \ @@ -163,24 +165,6 @@ static struct resource au1xxx_usb_gdt_resources[] = { }, }; -static struct resource au1xxx_mmc_resources[] = { - [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - } -}; - static u64 udc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_gdt_device = { @@ -249,16 +233,79 @@ static struct platform_device au1200_lcd_device = { static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; -static struct platform_device au1xxx_mmc_device = { +extern struct au1xmmc_platform_data au1xmmc_platdata[2]; + +static struct resource au1200_mmc0_resources[] = { + [0] = { + .start = SD0_PHYS_ADDR, + .end = SD0_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_SDMS_TX0, + .end = DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_SDMS_RX0, + .end = DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device au1200_mmc0_device = { .name = "au1xxx-mmc", .id = 0, .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &au1xmmc_platdata[0], }, - .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), - .resource = au1xxx_mmc_resources, + .num_resources = ARRAY_SIZE(au1200_mmc0_resources), + .resource = au1200_mmc0_resources, }; + +#ifndef CONFIG_MIPS_DB1200 +static struct resource au1200_mmc1_resources[] = { + [0] = { + .start = SD1_PHYS_ADDR, + .end = SD1_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_SDMS_TX1, + .end = DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_SDMS_RX1, + .end = DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device au1200_mmc1_device = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &au1xmmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_resources), + .resource = au1200_mmc1_resources, +}; +#endif /* #ifndef CONFIG_MIPS_DB1200 */ #endif /* #ifdef CONFIG_SOC_AU1200 */ static struct platform_device au1x00_pcmcia_device = { @@ -296,7 +343,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, - &au1xxx_mmc_device, + &au1200_mmc0_device, +#ifndef CONFIG_MIPS_DB1200 + &au1200_mmc1_device, +#endif #endif #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, diff --git a/arch/mips/alchemy/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c index f8fb0aeac57..95303297c53 100644 --- a/arch/mips/alchemy/pb1200/platform.c +++ b/arch/mips/alchemy/pb1200/platform.c @@ -20,9 +20,90 @@ #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/leds.h> #include <linux/platform_device.h> #include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1100_mmc.h> + +static int mmc_activity; + +static void pb1200mmc0_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD0PWR; + else + bcsr->board &= ~BCSR_BOARD_SD0PWR; + + au_sync_delay(1); +} + +static int pb1200mmc0_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int pb1200mmc0_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void pb1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) { + if (++mmc_activity == 1) + bcsr->disk_leds &= ~(1 << 8); + } else { + if (--mmc_activity == 0) + bcsr->disk_leds |= (1 << 8); + } +} + +static struct led_classdev pb1200mmc_led = { + .brightness_set = pb1200_mmcled_set, +}; + +#ifndef CONFIG_MIPS_DB1200 +static void pb1200mmc1_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD1PWR; + else + bcsr->board &= ~BCSR_BOARD_SD1PWR; + + au_sync_delay(1); +} + +static int pb1200mmc1_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200mmc1_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; +} +#endif + +const struct au1xmmc_platform_data au1xmmc_platdata[2] = { + [0] = { + .set_power = pb1200mmc0_set_power, + .card_inserted = pb1200mmc0_card_inserted, + .card_readonly = pb1200mmc0_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#ifndef CONFIG_MIPS_DB1200 + [1] = { + .set_power = pb1200mmc1_set_power, + .card_inserted = pb1200mmc1_card_inserted, + .card_readonly = pb1200mmc1_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#endif +}; static struct resource ide_resources[] = { [0] = { diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index cc8e6bf2b24..f719bf5e01a 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -771,7 +771,6 @@ CONFIG_WATCHDOG=y CONFIG_INDYDOG=m # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -CONFIG_SGI_DS1286=m # CONFIG_R3964 is not set CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 831d3e5a1ea..34ea319be94 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -701,7 +701,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_RTC is not set -CONFIG_SGI_IP27_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 822b01f643e..70a744e9a8c 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -70,7 +70,6 @@ CONFIG_CPU_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y -CONFIG_SGI_HAS_DS1286=y CONFIG_SGI_HAS_INDYDOG=y CONFIG_SGI_HAS_SEEQ=y CONFIG_SGI_HAS_WD93=y @@ -585,7 +584,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -CONFIG_SGI_DS1286=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig new file mode 100644 index 00000000000..d9536522cff --- /dev/null +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -0,0 +1,1149 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26 +# Sat Jul 26 09:02:59 2008 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +CONFIG_NXP_STB225=y +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_WR_PPMC is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SOC_PNX833X=y +CONFIG_SOC_PNX8335=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_128=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=128 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=y +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x18000000 +CONFIG_MTD_PHYSMAP_LEN=0x04000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PNX8XXX=y +CONFIG_SERIAL_PNX8XXX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=y +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +# CONFIG_DVB_CX24110 is not set +# CONFIG_DVB_CX24123 is not set +# CONFIG_DVB_MT312 is not set +# CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set +# CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set + +# +# DVB-T (terrestrial) frontends +# +# CONFIG_DVB_SP8870 is not set +# CONFIG_DVB_SP887X is not set +# CONFIG_DVB_CX22700 is not set +# CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set +# CONFIG_DVB_L64781 is not set +CONFIG_DVB_TDA1004X=y +# CONFIG_DVB_NXT6000 is not set +# CONFIG_DVB_MT352 is not set +# CONFIG_DVB_ZL10353 is not set +# CONFIG_DVB_DIB3000MB is not set +# CONFIG_DVB_DIB3000MC is not set +# CONFIG_DVB_DIB7000M is not set +# CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set + +# +# DVB-C (cable) frontends +# +# CONFIG_DVB_VES1820 is not set +# CONFIG_DVB_TDA10021 is not set +# CONFIG_DVB_TDA10023 is not set +# CONFIG_DVB_STV0297 is not set + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +# CONFIG_DVB_NXT200X is not set +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +# CONFIG_DVB_BCM3510 is not set +# CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set + +# +# Digital terrestrial only tuners/PLL +# +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_TUNER_DIB0070 is not set + +# +# SEC control devices for DVB-S +# +# CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set +# CONFIG_DVB_ISL6421 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_MIPS=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=m +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SAMPLES is not set +# CONFIG_KERNEL_TESTS is not set +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_PRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 3965fda94a8..1359c03ded5 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -45,12 +45,12 @@ unsigned long read_persistent_clock(void) spin_unlock_irqrestore(&rtc_lock, flags); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); } year += real_year - 72 + 2000; @@ -83,7 +83,7 @@ int rtc_mips_set_mmss(unsigned long nowtime) cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - cmos_minutes = BCD2BIN(cmos_minutes); + cmos_minutes = bcd2bin(cmos_minutes); /* * since we're only adjusting minutes and seconds, @@ -99,8 +99,8 @@ int rtc_mips_set_mmss(unsigned long nowtime) if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - real_seconds = BIN2BCD(real_seconds); - real_minutes = BIN2BCD(real_minutes); + real_seconds = bin2bcd(real_seconds); + real_minutes = bin2bcd(real_minutes); } CMOS_WRITE(real_seconds, RTC_SECONDS); CMOS_WRITE(real_minutes, RTC_MINUTES); diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig new file mode 100644 index 00000000000..9669c72123c --- /dev/null +++ b/arch/mips/emma/Kconfig @@ -0,0 +1,29 @@ +choice + prompt "Machine type" + depends on MACH_EMMA + default NEC_MARKEINS + +config NEC_MARKEINS + bool "NEC EMMA2RH Mark-eins board" + select SOC_EMMA2RH + select HW_HAS_PCI + help + This enables support for the NEC Electronics Mark-eins boards. + +endchoice + +config SOC_EMMA2RH + bool + select SOC_EMMA + select SYS_HAS_CPU_R5500 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + +config SOC_EMMA + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/emma2rh/common/Makefile b/arch/mips/emma/common/Makefile index 859121b3867..c392d28c1ef 100644 --- a/arch/mips/emma2rh/common/Makefile +++ b/arch/mips/emma/common/Makefile @@ -10,4 +10,4 @@ # (at your option) any later version. # -obj-$(CONFIG_MARKEINS) += irq.o irq_emma2rh.o prom.o +obj-$(CONFIG_NEC_MARKEINS) += prom.o diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma/common/prom.c index e14a2e3d884..120f53fbdb4 100644 --- a/arch/mips/emma2rh/common/prom.c +++ b/arch/mips/emma/common/prom.c @@ -29,11 +29,11 @@ #include <asm/addrspace.h> #include <asm/bootinfo.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> const char *get_system_type(void) { -#if defined(CONFIG_MARKEINS) +#ifdef CONFIG_NEC_MARKEINS return "NEC EMMA2RH Mark-eins"; #else #error Unknown NEC board @@ -60,7 +60,7 @@ void __init prom_init(void) strcat(arcs_cmdline, " "); } -#if defined(CONFIG_MARKEINS) +#ifdef CONFIG_NEC_MARKEINS add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); #else #error Unknown NEC board diff --git a/arch/mips/emma2rh/markeins/Makefile b/arch/mips/emma/markeins/Makefile index 14fc268b175..16e0017ba91 100644 --- a/arch/mips/emma2rh/markeins/Makefile +++ b/arch/mips/emma/markeins/Makefile @@ -10,4 +10,4 @@ # (at your option) any later version. # -obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o +obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c new file mode 100644 index 00000000000..c2583ecc93c --- /dev/null +++ b/arch/mips/emma/markeins/irq.c @@ -0,0 +1,331 @@ +/* + * arch/mips/emma2rh/markeins/irq.c + * This file defines the irq handler for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/delay.h> + +#include <asm/irq_cpu.h> +#include <asm/system.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> + +#include <asm/emma/emma2rh.h> + +static void emma2rh_irq_enable(unsigned int irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + irq -= EMMA2RH_IRQ_BASE; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (irq % 32); + emma2rh_out32(reg_index, reg_value | reg_bitmask); +} + +static void emma2rh_irq_disable(unsigned int irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + irq -= EMMA2RH_IRQ_BASE; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (irq % 32); + emma2rh_out32(reg_index, reg_value & ~reg_bitmask); +} + +struct irq_chip emma2rh_irq_controller = { + .name = "emma2rh_irq", + .ack = emma2rh_irq_disable, + .mask = emma2rh_irq_disable, + .mask_ack = emma2rh_irq_disable, + .unmask = emma2rh_irq_enable, +}; + +void emma2rh_irq_init(void) +{ + u32 i; + + for (i = 0; i < NUM_EMMA2RH_IRQ; i++) + set_irq_chip_and_handler(EMMA2RH_IRQ_BASE + i, + &emma2rh_irq_controller, + handle_level_irq); +} + +static void emma2rh_sw_irq_enable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_SW_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +static void emma2rh_sw_irq_disable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_SW_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +struct irq_chip emma2rh_sw_irq_controller = { + .name = "emma2rh_sw_irq", + .ack = emma2rh_sw_irq_disable, + .mask = emma2rh_sw_irq_disable, + .mask_ack = emma2rh_sw_irq_disable, + .unmask = emma2rh_sw_irq_enable, +}; + +void emma2rh_sw_irq_init(void) +{ + u32 i; + + for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++) + set_irq_chip_and_handler(EMMA2RH_SW_IRQ_BASE + i, + &emma2rh_sw_irq_controller, + handle_level_irq); +} + +static void emma2rh_gpio_irq_enable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_GPIO_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +static void emma2rh_gpio_irq_disable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_GPIO_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +static void emma2rh_gpio_irq_ack(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_GPIO_IRQ_BASE; + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +static void emma2rh_gpio_irq_end(unsigned int irq) +{ + u32 reg; + + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + + irq -= EMMA2RH_GPIO_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); + } +} + +struct irq_chip emma2rh_gpio_irq_controller = { + .name = "emma2rh_gpio_irq", + .ack = emma2rh_gpio_irq_ack, + .mask = emma2rh_gpio_irq_disable, + .mask_ack = emma2rh_gpio_irq_ack, + .unmask = emma2rh_gpio_irq_enable, + .end = emma2rh_gpio_irq_end, +}; + +void emma2rh_gpio_irq_init(void) +{ + u32 i; + + for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++) + set_irq_chip(EMMA2RH_GPIO_IRQ_BASE + i, + &emma2rh_gpio_irq_controller); +} + +static struct irqaction irq_cascade = { + .handler = no_action, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "cascade", + .dev_id = NULL, + .next = NULL, +}; + +/* + * the first level int-handler will jump here if it is a emma2rh irq + */ +void emma2rh_irq_dispatch(void) +{ + u32 intStatus; + u32 bitmask; + u32 i; + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) & + emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); + +#ifdef EMMA2RH_SW_CASCADE + if (intStatus & + (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 swIntStatus; + swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) + & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (swIntStatus & bitmask) { + do_IRQ(EMMA2RH_SW_IRQ_BASE + i); + return; + } + } + } +#endif + + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) & + emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); + +#ifdef EMMA2RH_GPIO_CASCADE + if (intStatus & + (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 gpioIntStatus; + gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) + & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (gpioIntStatus & bitmask) { + do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); + return; + } + } + } +#endif + + for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) & + emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); + + for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } +} + +void __init arch_init_irq(void) +{ + u32 reg; + + /* by default, interrupts are disabled. */ + emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); + + clear_c0_status(0xff00); + set_c0_status(0x0400); + +#define GPIO_PCI (0xf<<15) + /* setup GPIO interrupt for PCI interface */ + /* direction input */ + reg = emma2rh_in32(EMMA2RH_GPIO_DIR); + emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); + /* disable interrupt */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); + /* level triggerd */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); + emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); + reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); + emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); + /* interrupt clear */ + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); + + /* init all controllers */ + emma2rh_irq_init(); + emma2rh_sw_irq_init(); + emma2rh_gpio_irq_init(); + mips_cpu_irq_init(); + + /* setup cascade interrupts */ + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7); + else if (pending & STATUSF_IP2) + emma2rh_irq_dispatch(); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE + 0); + else + spurious_interrupt(); +} diff --git a/arch/mips/emma2rh/markeins/led.c b/arch/mips/emma/markeins/led.c index b65254c1bfe..377a181b656 100644 --- a/arch/mips/emma2rh/markeins/led.c +++ b/arch/mips/emma/markeins/led.c @@ -21,7 +21,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/string.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> const unsigned long clear = 0x20202020; diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma/markeins/platform.c index fb9cda253ab..88e87f6b344 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -36,7 +36,7 @@ #include <asm/reboot.h> #include <asm/traps.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */ diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma/markeins/setup.c index b6a23ad539f..67f45650008 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma/markeins/setup.c @@ -29,7 +29,7 @@ #include <asm/time.h> #include <asm/reboot.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ diff --git a/arch/mips/emma2rh/common/irq.c b/arch/mips/emma2rh/common/irq.c deleted file mode 100644 index 91cbd959ab6..00000000000 --- a/arch/mips/emma2rh/common/irq.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/mips/emma2rh/common/irq.c - * This file is common irq dispatcher. - * - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> - -#include <asm/system.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> - -#include <asm/emma2rh/emma2rh.h> - -/* - * the first level int-handler will jump here if it is a emma2rh irq - */ -void emma2rh_irq_dispatch(void) -{ - u32 intStatus; - u32 bitmask; - u32 i; - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) - & emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); - -#ifdef EMMA2RH_SW_CASCADE - if (intStatus & - (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { - u32 swIntStatus; - swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) - & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (swIntStatus & bitmask) { - do_IRQ(EMMA2RH_SW_IRQ_BASE + i); - return; - } - } - } -#endif - - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) - & emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); - -#ifdef EMMA2RH_GPIO_CASCADE - if (intStatus & - (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { - u32 gpioIntStatus; - gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) - & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (gpioIntStatus & bitmask) { - do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); - return; - } - } - } -#endif - - for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) - & emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); - - for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } -} diff --git a/arch/mips/emma2rh/common/irq_emma2rh.c b/arch/mips/emma2rh/common/irq_emma2rh.c deleted file mode 100644 index 96df37b7775..00000000000 --- a/arch/mips/emma2rh/common/irq_emma2rh.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/mips/emma2rh/common/irq_emma2rh.c - * This file defines the irq handler for EMMA2RH. - * - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * EMMA2RH defines 64 IRQs. - * - * This file exports one function: - * emma2rh_irq_init(u32 irq_base); - */ - -#include <linux/interrupt.h> -#include <linux/types.h> -#include <linux/ptrace.h> - -#include <asm/debug.h> - -#include <asm/emma2rh/emma2rh.h> - -/* number of total irqs supported by EMMA2RH */ -#define NUM_EMMA2RH_IRQ 96 - -static int emma2rh_irq_base = -1; - -void ll_emma2rh_irq_enable(int); -void ll_emma2rh_irq_disable(int); - -static void emma2rh_irq_enable(unsigned int irq) -{ - ll_emma2rh_irq_enable(irq - emma2rh_irq_base); -} - -static void emma2rh_irq_disable(unsigned int irq) -{ - ll_emma2rh_irq_disable(irq - emma2rh_irq_base); -} - -struct irq_chip emma2rh_irq_controller = { - .name = "emma2rh_irq", - .ack = emma2rh_irq_disable, - .mask = emma2rh_irq_disable, - .mask_ack = emma2rh_irq_disable, - .unmask = emma2rh_irq_enable, -}; - -void emma2rh_irq_init(u32 irq_base) -{ - u32 i; - - for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++) - set_irq_chip_and_handler(i, &emma2rh_irq_controller, - handle_level_irq); - - emma2rh_irq_base = irq_base; -} - -void ll_emma2rh_irq_enable(int emma2rh_irq) -{ - u32 reg_value; - u32 reg_bitmask; - u32 reg_index; - - reg_index = EMMA2RH_BHIF_INT_EN_0 - + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) - * (emma2rh_irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (emma2rh_irq % 32); - db_assert((reg_value & reg_bitmask) == 0); - emma2rh_out32(reg_index, reg_value | reg_bitmask); -} - -void ll_emma2rh_irq_disable(int emma2rh_irq) -{ - u32 reg_value; - u32 reg_bitmask; - u32 reg_index; - - reg_index = EMMA2RH_BHIF_INT_EN_0 - + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) - * (emma2rh_irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (emma2rh_irq % 32); - db_assert((reg_value & reg_bitmask) != 0); - emma2rh_out32(reg_index, reg_value & ~reg_bitmask); -} diff --git a/arch/mips/emma2rh/markeins/irq.c b/arch/mips/emma2rh/markeins/irq.c deleted file mode 100644 index 6bcf6a06367..00000000000 --- a/arch/mips/emma2rh/markeins/irq.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/mips/emma2rh/markeins/irq.c - * This file defines the irq handler for EMMA2RH. - * - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/delay.h> - -#include <asm/irq_cpu.h> -#include <asm/system.h> -#include <asm/mipsregs.h> -#include <asm/debug.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> - -#include <asm/emma2rh/emma2rh.h> - -/* - * IRQ mapping - * - * 0-7: 8 CPU interrupts - * 0 - software interrupt 0 - * 1 - software interrupt 1 - * 2 - most Vrc5477 interrupts are routed to this pin - * 3 - (optional) some other interrupts routed to this pin for debugg - * 4 - not used - * 5 - not used - * 6 - not used - * 7 - cpu timer (used by default) - * - */ - -extern void emma2rh_sw_irq_init(u32 base); -extern void emma2rh_gpio_irq_init(u32 base); -extern void emma2rh_irq_init(u32 base); -extern void emma2rh_irq_dispatch(void); - -static struct irqaction irq_cascade = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "cascade", - .dev_id = NULL, - .next = NULL, -}; - -void __init arch_init_irq(void) -{ - u32 reg; - - db_run(printk("markeins_irq_setup invoked.\n")); - - /* by default, interrupts are disabled. */ - emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); - - clear_c0_status(0xff00); - set_c0_status(0x0400); - -#define GPIO_PCI (0xf<<15) - /* setup GPIO interrupt for PCI interface */ - /* direction input */ - reg = emma2rh_in32(EMMA2RH_GPIO_DIR); - emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); - /* disable interrupt */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); - /* level triggerd */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); - emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); - reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); - emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); - /* interrupt clear */ - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); - - /* init all controllers */ - emma2rh_irq_init(EMMA2RH_IRQ_BASE); - emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE); - emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE); - mips_cpu_irq_init(); - - /* setup cascade interrupts */ - setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); - setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); - setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(CPU_IRQ_BASE + 7); - else if (pending & STATUSF_IP2) - emma2rh_irq_dispatch(); - else if (pending & STATUSF_IP1) - do_IRQ(CPU_IRQ_BASE + 1); - else if (pending & STATUSF_IP0) - do_IRQ(CPU_IRQ_BASE + 0); - else - spurious_interrupt(); -} - - diff --git a/arch/mips/emma2rh/markeins/irq_markeins.c b/arch/mips/emma2rh/markeins/irq_markeins.c deleted file mode 100644 index fba5c156f47..00000000000 --- a/arch/mips/emma2rh/markeins/irq_markeins.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * arch/mips/emma2rh/markeins/irq_markeins.c - * This file defines the irq handler for Mark-eins. - * - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/ptrace.h> - -#include <asm/debug.h> -#include <asm/emma2rh/emma2rh.h> - -static int emma2rh_sw_irq_base = -1; -static int emma2rh_gpio_irq_base = -1; - -void ll_emma2rh_sw_irq_enable(int reg); -void ll_emma2rh_sw_irq_disable(int reg); -void ll_emma2rh_gpio_irq_enable(int reg); -void ll_emma2rh_gpio_irq_disable(int reg); - -static void emma2rh_sw_irq_enable(unsigned int irq) -{ - ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base); -} - -static void emma2rh_sw_irq_disable(unsigned int irq) -{ - ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base); -} - -struct irq_chip emma2rh_sw_irq_controller = { - .name = "emma2rh_sw_irq", - .ack = emma2rh_sw_irq_disable, - .mask = emma2rh_sw_irq_disable, - .mask_ack = emma2rh_sw_irq_disable, - .unmask = emma2rh_sw_irq_enable, -}; - -void emma2rh_sw_irq_init(u32 irq_base) -{ - u32 i; - - for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++) - set_irq_chip_and_handler(i, &emma2rh_sw_irq_controller, - handle_level_irq); - - emma2rh_sw_irq_base = irq_base; -} - -void ll_emma2rh_sw_irq_enable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < NUM_EMMA2RH_IRQ_SW); - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -void ll_emma2rh_sw_irq_disable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < 32); - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -static void emma2rh_gpio_irq_enable(unsigned int irq) -{ - ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); -} - -static void emma2rh_gpio_irq_disable(unsigned int irq) -{ - ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base); -} - -static void emma2rh_gpio_irq_ack(unsigned int irq) -{ - irq -= emma2rh_gpio_irq_base; - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); - ll_emma2rh_gpio_irq_disable(irq); -} - -static void emma2rh_gpio_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); -} - -struct irq_chip emma2rh_gpio_irq_controller = { - .name = "emma2rh_gpio_irq", - .ack = emma2rh_gpio_irq_ack, - .mask = emma2rh_gpio_irq_disable, - .mask_ack = emma2rh_gpio_irq_ack, - .unmask = emma2rh_gpio_irq_enable, - .end = emma2rh_gpio_irq_end, -}; - -void emma2rh_gpio_irq_init(u32 irq_base) -{ - u32 i; - - for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++) - set_irq_chip(i, &emma2rh_gpio_irq_controller); - - emma2rh_gpio_irq_base = irq_base; -} - -void ll_emma2rh_gpio_irq_enable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -void ll_emma2rh_gpio_irq_disable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 49df8c4c9d2..bac4a960b24 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -558,39 +558,67 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long * __clear_bit(nr, addr); } -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - /* * Return the bit position (0..63) of the most significant 1 bit in a word * Returns -1 if no 1 bit exists */ -static inline unsigned long __fls(unsigned long x) +static inline unsigned long __fls(unsigned long word) { - int lz; + int num; - if (sizeof(x) == 4) { + if (BITS_PER_LONG == 32 && + __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { __asm__( " .set push \n" " .set mips32 \n" " clz %0, %1 \n" " .set pop \n" - : "=r" (lz) - : "r" (x)); + : "=r" (num) + : "r" (word)); - return 31 - lz; + return 31 - num; } - BUG_ON(sizeof(x) != 8); + if (BITS_PER_LONG == 64 && + __builtin_constant_p(cpu_has_mips64) && cpu_has_mips64) { + __asm__( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (num) + : "r" (word)); - __asm__( - " .set push \n" - " .set mips64 \n" - " dclz %0, %1 \n" - " .set pop \n" - : "=r" (lz) - : "r" (x)); + return 63 - num; + } + + num = BITS_PER_LONG - 1; - return 63 - lz; +#if BITS_PER_LONG == 64 + if (!(word & (~0ul << 32))) { + num -= 32; + word <<= 32; + } +#endif + if (!(word & (~0ul << (BITS_PER_LONG-16)))) { + num -= 16; + word <<= 16; + } + if (!(word & (~0ul << (BITS_PER_LONG-8)))) { + num -= 8; + word <<= 8; + } + if (!(word & (~0ul << (BITS_PER_LONG-4)))) { + num -= 4; + word <<= 4; + } + if (!(word & (~0ul << (BITS_PER_LONG-2)))) { + num -= 2; + word <<= 2; + } + if (!(word & (~0ul << (BITS_PER_LONG-1)))) + num -= 1; + return num; } /* @@ -612,23 +640,43 @@ static inline unsigned long __ffs(unsigned long word) * This is defined the same way as ffs. * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. */ -static inline int fls(int word) +static inline int fls(int x) { - __asm__("clz %0, %1" : "=r" (word) : "r" (word)); + int r; - return 32 - word; -} + if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + __asm__("clz %0, %1" : "=r" (x) : "r" (x)); -#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64) -static inline int fls64(__u64 word) -{ - __asm__("dclz %0, %1" : "=r" (word) : "r" (word)); + return 32 - x; + } - return 64 - word; + r = 32; + if (!x) + return 0; + if (!(x & 0xffff0000u)) { + x <<= 16; + r -= 16; + } + if (!(x & 0xff000000u)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf0000000u)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc0000000u)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x80000000u)) { + x <<= 1; + r -= 1; + } + return r; } -#else + #include <asm-generic/bitops/fls64.h> -#endif /* * ffs - find first bit set. @@ -646,16 +694,6 @@ static inline int ffs(int word) return fls(word & -word); } -#else - -#include <asm-generic/bitops/__ffs.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/fls64.h> - -#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */ - #include <asm-generic/bitops/ffz.h> #include <asm-generic/bitops/find.h> diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h index 25b980c91e7..44437ed765e 100644 --- a/arch/mips/include/asm/break.h +++ b/arch/mips/include/asm/break.h @@ -29,6 +29,7 @@ #define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ #define BRK_BUG 512 /* Used by BUG() */ #define BRK_KDB 513 /* Used in KDB_ENTER() */ +#define BRK_MEMU 514 /* Used by FPU emulator */ #define BRK_MULOVF 1023 /* Multiply overflow */ #endif /* __ASM_BREAK_H */ diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h index fe7dc2d59b6..2988d29a086 100644 --- a/arch/mips/include/asm/byteorder.h +++ b/arch/mips/include/asm/byteorder.h @@ -11,11 +11,19 @@ #include <linux/compiler.h> #include <asm/types.h> -#ifdef __GNUC__ +#if defined(__MIPSEB__) +# define __BIG_ENDIAN +#elif defined(__MIPSEL__) +# define __LITTLE_ENDIAN +#else +# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#define __SWAB_64_THRU_32__ #ifdef CONFIG_CPU_MIPSR2 -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) { __asm__( " wsbh %0, %1 \n" @@ -24,9 +32,9 @@ static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) return x; } -#define __arch__swab16(x) ___arch__swab16(x) +#define __arch_swab16 __arch_swab16 -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __asm__( " wsbh %0, %1 \n" @@ -36,11 +44,10 @@ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) return x; } -#define __arch__swab32(x) ___arch__swab32(x) +#define __arch_swab32 __arch_swab32 #ifdef CONFIG_CPU_MIPS64_R2 - -static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) +static inline __attribute_const__ __u64 __arch_swab64(__u64 x) { __asm__( " dsbh %0, %1 \n" @@ -51,26 +58,11 @@ static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) return x; } - -#define __arch__swab64(x) ___arch__swab64(x) - +#define __arch_swab64 __arch_swab64 #endif /* CONFIG_CPU_MIPS64_R2 */ #endif /* CONFIG_CPU_MIPSR2 */ -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#if defined(__MIPSEB__) -# include <linux/byteorder/big_endian.h> -#elif defined(__MIPSEL__) -# include <linux/byteorder/little_endian.h> -#else -# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" -#endif +#include <linux/byteorder.h> #endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 5ea701fc342..12d12dfe73c 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -141,6 +141,8 @@ #define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2) #define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) #define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) +#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ + cpu_has_mips64r1 | cpu_has_mips64r2) #ifndef cpu_has_dsp #define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h deleted file mode 100644 index 6983b6ff0af..00000000000 --- a/arch/mips/include/asm/ds1286.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Machine dependent access functions for RTC registers. - * - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef _ASM_DS1286_H -#define _ASM_DS1286_H - -#include <ds1286.h> - -#endif /* _ASM_DS1286_H */ diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h index 6a1af0af51e..30aea91de62 100644 --- a/arch/mips/include/asm/emma2rh/emma2rh.h +++ b/arch/mips/include/asm/emma/emma2rh.h @@ -1,5 +1,5 @@ /* - * include/asm-mips/emma2rh/emma2rh.h + * arch/mips/include/asm/emma/emma2rh.h * This file is EMMA2RH common header. * * Copyright (C) NEC Electronics Corporation 2005-2006 @@ -21,8 +21,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_EMMA2RH_EMMA2RH_H -#define __ASM_EMMA2RH_EMMA2RH_H +#ifndef __ASM_EMMA_EMMA2RH_H +#define __ASM_EMMA_EMMA2RH_H #include <irq.h> @@ -206,7 +206,6 @@ static inline void emma2rh_out32(u32 offset, u32 val) static inline u32 emma2rh_in32(u32 offset) { u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); return val; } @@ -219,7 +218,6 @@ static inline void emma2rh_out16(u32 offset, u16 val) static inline u16 emma2rh_in16(u32 offset) { u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); return val; } @@ -232,7 +230,6 @@ static inline void emma2rh_out8(u32 offset, u8 val) static inline u8 emma2rh_in8(u32 offset) { u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); return val; } @@ -324,10 +321,10 @@ static inline u8 emma2rh_in8(u32 offset) /* * include the board dependent part */ -#if defined(CONFIG_MARKEINS) -#include <asm/emma2rh/markeins.h> +#ifdef CONFIG_NEC_MARKEINS +#include <asm/emma/markeins.h> #else #error "Unknown EMMA2RH board!" #endif -#endif /* __ASM_EMMA2RH_EMMA2RH_H */ +#endif /* __ASM_EMMA_EMMA2RH_H */ diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma/markeins.h index 973b0628490..973b0628490 100644 --- a/arch/mips/include/asm/emma2rh/markeins.h +++ b/arch/mips/include/asm/emma/markeins.h diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index 2731c38bd7a..e5189572956 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -23,6 +23,9 @@ #ifndef _ASM_FPU_EMULATOR_H #define _ASM_FPU_EMULATOR_H +#include <asm/break.h> +#include <asm/inst.h> + struct mips_fpu_emulator_stats { unsigned int emulated; unsigned int loads; @@ -34,4 +37,18 @@ struct mips_fpu_emulator_stats { extern struct mips_fpu_emulator_stats fpuemustats; +extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, + unsigned long cpc); +extern int do_dsemulret(struct pt_regs *xcp); + +/* + * Instruction inserted following the badinst to further tag the sequence + */ +#define BD_COOKIE 0x0000bd36 /* tne $0, $0 with baggage */ + +/* + * Break instruction with special math emu break code set + */ +#define BREAK_MATH (0x0000000d | (BRK_MEMU << 16)) + #endif /* _ASM_FPU_EMULATOR_H */ diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h deleted file mode 100644 index f44852e9a96..00000000000 --- a/arch/mips/include/asm/m48t35.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip - */ -#ifndef _ASM_M48T35_H -#define _ASM_M48T35_H - -#include <linux/spinlock.h> - -extern spinlock_t rtc_lock; - -struct m48t35_rtc { - volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */ - volatile u8 control; - volatile u8 sec; - volatile u8 min; - volatile u8 hour; - volatile u8 day; - volatile u8 date; - volatile u8 month; - volatile u8 year; -}; - -#define M48T35_RTC_SET 0x80 -#define M48T35_RTC_STOPPED 0x80 -#define M48T35_RTC_READ 0x40 - -#endif /* _ASM_M48T35_H */ diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h new file mode 100644 index 00000000000..ea6aa143b78 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/pci.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org> + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + */ + +#ifndef _LEMOTE_PCI_H_ +#define _LEMOTE_PCI_H_ + +#define LOONGSON2E_PCI_MEM_START 0x14000000UL +#define LOONGSON2E_PCI_MEM_END 0x1fffffffUL +#define LOONGSON2E_PCI_IO_START 0x00004000UL +#define LOONGSON2E_IO_PORT_BASE 0x1fd00000UL + +#endif /* !_LEMOTE_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h new file mode 100644 index 00000000000..8de0eb9c98a --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/gpio.h @@ -0,0 +1,172 @@ +/* + * gpio.h: GPIO Support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H +#define __ASM_MIPS_MACH_PNX833X_GPIO_H + +/* BIG FAT WARNING: races danger! + No protections exist here. Current users are only early init code, + when locking is not needed because no cuncurency yet exists there, + and GPIO IRQ dispatcher, which does locking. + However, if many uses will ever happen, proper locking will be needed + - including locking between different uses +*/ + +#include "pnx833x.h" + +#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0) +#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0) + +/* Initialize GPIO to a known state */ +static inline void pnx833x_gpio_init(void) +{ + PNX833X_PIO_DIR = 0; + PNX833X_PIO_DIR2 = 0; + PNX833X_PIO_SEL = 0; + PNX833X_PIO_SEL2 = 0; + PNX833X_PIO_INT_EDGE = 0; + PNX833X_PIO_INT_HI = 0; + PNX833X_PIO_INT_LO = 0; + + /* clear any GPIO interrupt requests */ + PNX833X_PIO_INT_CLEAR = 0xffff; + PNX833X_PIO_INT_CLEAR = 0; + PNX833X_PIO_INT_ENABLE = 0; +} + +/* Select GPIO direction for a pin */ +static inline void pnx833x_gpio_select_input(unsigned int pin) +{ + if (pin < 32) + CLEAR_REG_BIT(PNX833X_PIO_DIR, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31); +} +static inline void pnx833x_gpio_select_output(unsigned int pin) +{ + if (pin < 32) + SET_REG_BIT(PNX833X_PIO_DIR, pin); + else + SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31); +} + +/* Select GPIO or alternate function for a pin */ +static inline void pnx833x_gpio_select_function_io(unsigned int pin) +{ + if (pin < 32) + CLEAR_REG_BIT(PNX833X_PIO_SEL, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31); +} +static inline void pnx833x_gpio_select_function_alt(unsigned int pin) +{ + if (pin < 32) + SET_REG_BIT(PNX833X_PIO_SEL, pin); + else + SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31); +} + +/* Read GPIO pin */ +static inline int pnx833x_gpio_read(unsigned int pin) +{ + if (pin < 32) + return (PNX833X_PIO_IN >> pin) & 1; + else + return (PNX833X_PIO_IN2 >> (pin & 31)) & 1; +} + +/* Write GPIO pin */ +static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin) +{ + if (pin < 32) { + if (val) + SET_REG_BIT(PNX833X_PIO_OUT, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_OUT, pin); + } else { + if (val) + SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31); + else + CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31); + } +} + +/* Configure GPIO interrupt */ +#define GPIO_INT_NONE 0 +#define GPIO_INT_LEVEL_LOW 1 +#define GPIO_INT_LEVEL_HIGH 2 +#define GPIO_INT_EDGE_RISING 3 +#define GPIO_INT_EDGE_FALLING 4 +#define GPIO_INT_EDGE_BOTH 5 +static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin) +{ + switch (when) { + case GPIO_INT_LEVEL_LOW: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_LEVEL_HIGH: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_RISING: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_FALLING: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_BOTH: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + default: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + } +} + +/* Enable/disable GPIO interrupt */ +static inline void pnx833x_gpio_enable_irq(unsigned int pin) +{ + SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); +} +static inline void pnx833x_gpio_disable_irq(unsigned int pin) +{ + CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); +} + +/* Clear GPIO interrupt request */ +static inline void pnx833x_gpio_clear_irq(unsigned int pin) +{ + SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); +} + +#endif diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h new file mode 100644 index 00000000000..657f089b172 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h @@ -0,0 +1,126 @@ + +/* + * irq.h: IRQ mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H +#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H +/* + * The "IRQ numbers" are completely virtual. + * + * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. + * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, + * numbers 49..64 for (virtual) GPIO interrupts. + * + * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, + * connected to PIC, which uses core hardware interrupt 2, and also + * a timer interrupt through hardware interrupt 5. + * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, + * numbers 65..80 for (virtual) GPIO interrupts. + * + */ +#include <irq.h> + +#define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) + +/* Interrupts supported by PIC */ +#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1) +#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2) +#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3) +#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4) +#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5) +#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6) +#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7) +#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8) +#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9) +#define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10) +#define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11) +#define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12) +#define PNX8330_PIC_SPU_INT (PNX833X_PIC_IRQ_BASE + 13) +#define PNX8335_PIC_SATA_INT (PNX833X_PIC_IRQ_BASE + 13) +#define PNX833X_PIC_OSD_INT (PNX833X_PIC_IRQ_BASE + 14) +#define PNX833X_PIC_DISP1_INT (PNX833X_PIC_IRQ_BASE + 15) +#define PNX833X_PIC_DEINTERLACER_INT (PNX833X_PIC_IRQ_BASE + 16) +#define PNX833X_PIC_DISPLAY2_INT (PNX833X_PIC_IRQ_BASE + 17) +#define PNX833X_PIC_VC_INT (PNX833X_PIC_IRQ_BASE + 18) +#define PNX833X_PIC_SC_INT (PNX833X_PIC_IRQ_BASE + 19) +#define PNX833X_PIC_IDE_INT (PNX833X_PIC_IRQ_BASE + 20) +#define PNX833X_PIC_IDE_DMA_INT (PNX833X_PIC_IRQ_BASE + 21) +#define PNX833X_PIC_TS_IN1_DV_INT (PNX833X_PIC_IRQ_BASE + 22) +#define PNX833X_PIC_TS_IN1_DMA_INT (PNX833X_PIC_IRQ_BASE + 23) +#define PNX833X_PIC_SGDX_DMA_INT (PNX833X_PIC_IRQ_BASE + 24) +#define PNX833X_PIC_TS_OUT_INT (PNX833X_PIC_IRQ_BASE + 25) +#define PNX833X_PIC_IR_INT (PNX833X_PIC_IRQ_BASE + 26) +#define PNX833X_PIC_VMSP1_INT (PNX833X_PIC_IRQ_BASE + 27) +#define PNX833X_PIC_VMSP2_INT (PNX833X_PIC_IRQ_BASE + 28) +#define PNX833X_PIC_PIBC_INT (PNX833X_PIC_IRQ_BASE + 29) +#define PNX833X_PIC_TS_IN0_TRD_INT (PNX833X_PIC_IRQ_BASE + 30) +#define PNX833X_PIC_SGDX_TPD_INT (PNX833X_PIC_IRQ_BASE + 31) +#define PNX833X_PIC_USB_INT (PNX833X_PIC_IRQ_BASE + 32) +#define PNX833X_PIC_TS_IN1_TRD_INT (PNX833X_PIC_IRQ_BASE + 33) +#define PNX833X_PIC_CLOCK_INT (PNX833X_PIC_IRQ_BASE + 34) +#define PNX833X_PIC_SGDX_PARSER_INT (PNX833X_PIC_IRQ_BASE + 35) +#define PNX833X_PIC_VMSP_DMA_INT (PNX833X_PIC_IRQ_BASE + 36) + +#if defined(CONFIG_SOC_PNX8335) +#define PNX8335_PIC_MIU_INT (PNX833X_PIC_IRQ_BASE + 37) +#define PNX8335_PIC_AVCHIP_IRQ_INT (PNX833X_PIC_IRQ_BASE + 38) +#define PNX8335_PIC_SYNC_HD_INT (PNX833X_PIC_IRQ_BASE + 39) +#define PNX8335_PIC_DISP_HD_INT (PNX833X_PIC_IRQ_BASE + 40) +#define PNX8335_PIC_DISP_SCALER_INT (PNX833X_PIC_IRQ_BASE + 41) +#define PNX8335_PIC_OSD_HD1_INT (PNX833X_PIC_IRQ_BASE + 42) +#define PNX8335_PIC_DTL_WRITER_Y_INT (PNX833X_PIC_IRQ_BASE + 43) +#define PNX8335_PIC_DTL_WRITER_C_INT (PNX833X_PIC_IRQ_BASE + 44) +#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT (PNX833X_PIC_IRQ_BASE + 45) +#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT (PNX833X_PIC_IRQ_BASE + 46) +#define PNX8335_PIC_DENC_TTX_INT (PNX833X_PIC_IRQ_BASE + 47) +#define PNX8335_PIC_MMI_SIF0_INT (PNX833X_PIC_IRQ_BASE + 48) +#define PNX8335_PIC_MMI_SIF1_INT (PNX833X_PIC_IRQ_BASE + 49) +#define PNX8335_PIC_MMI_CDMMU_INT (PNX833X_PIC_IRQ_BASE + 50) +#define PNX8335_PIC_PIBCS_INT (PNX833X_PIC_IRQ_BASE + 51) +#define PNX8335_PIC_ETHERNET_INT (PNX833X_PIC_IRQ_BASE + 52) +#define PNX8335_PIC_VMSP1_0_INT (PNX833X_PIC_IRQ_BASE + 53) +#define PNX8335_PIC_VMSP1_1_INT (PNX833X_PIC_IRQ_BASE + 54) +#define PNX8335_PIC_VMSP1_DMA_INT (PNX833X_PIC_IRQ_BASE + 55) +#define PNX8335_PIC_TDGR_DE_INT (PNX833X_PIC_IRQ_BASE + 56) +#define PNX8335_PIC_IR1_IRQ_INT (PNX833X_PIC_IRQ_BASE + 57) +#endif + +/* GPIO interrupts */ +#define PNX833X_GPIO_0_INT (PNX833X_GPIO_IRQ_BASE + 0) +#define PNX833X_GPIO_1_INT (PNX833X_GPIO_IRQ_BASE + 1) +#define PNX833X_GPIO_2_INT (PNX833X_GPIO_IRQ_BASE + 2) +#define PNX833X_GPIO_3_INT (PNX833X_GPIO_IRQ_BASE + 3) +#define PNX833X_GPIO_4_INT (PNX833X_GPIO_IRQ_BASE + 4) +#define PNX833X_GPIO_5_INT (PNX833X_GPIO_IRQ_BASE + 5) +#define PNX833X_GPIO_6_INT (PNX833X_GPIO_IRQ_BASE + 6) +#define PNX833X_GPIO_7_INT (PNX833X_GPIO_IRQ_BASE + 7) +#define PNX833X_GPIO_8_INT (PNX833X_GPIO_IRQ_BASE + 8) +#define PNX833X_GPIO_9_INT (PNX833X_GPIO_IRQ_BASE + 9) +#define PNX833X_GPIO_10_INT (PNX833X_GPIO_IRQ_BASE + 10) +#define PNX833X_GPIO_11_INT (PNX833X_GPIO_IRQ_BASE + 11) +#define PNX833X_GPIO_12_INT (PNX833X_GPIO_IRQ_BASE + 12) +#define PNX833X_GPIO_13_INT (PNX833X_GPIO_IRQ_BASE + 13) +#define PNX833X_GPIO_14_INT (PNX833X_GPIO_IRQ_BASE + 14) +#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15) + +#endif + diff --git a/arch/mips/include/asm/mach-pnx833x/irq.h b/arch/mips/include/asm/mach-pnx833x/irq.h new file mode 100644 index 00000000000..745114b1d8d --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/irq.h @@ -0,0 +1,53 @@ +/* + * irq.h: IRQ mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H +#define __ASM_MIPS_MACH_PNX833X_IRQ_H +/* + * The "IRQ numbers" are completely virtual. + * + * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. + * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, + * numbers 49..64 for (virtual) GPIO interrupts. + * + * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, + * connected to PIC, which uses core hardware interrupt 2, and also + * a timer interrupt through hardware interrupt 5. + * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, + * numbers 65..80 for (virtual) GPIO interrupts. + * + */ +#if defined(CONFIG_SOC_PNX8335) + #define PNX833X_PIC_NUM_IRQ 58 +#else + #define PNX833X_PIC_NUM_IRQ 37 +#endif + +#define MIPS_CPU_NUM_IRQ 8 +#define PNX833X_GPIO_NUM_IRQ 16 + +#define MIPS_CPU_IRQ_BASE 0 +#define PNX833X_PIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ) +#define PNX833X_GPIO_IRQ_BASE (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ) +#define NR_IRQS (MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ) + +#endif diff --git a/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/arch/mips/include/asm/mach-pnx833x/pnx833x.h new file mode 100644 index 00000000000..100f52870e3 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/pnx833x.h @@ -0,0 +1,202 @@ +/* + * pnx833x.h: Register mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H +#define __ASM_MIPS_MACH_PNX833X_PNX833X_H + +/* All regs are accessed in KSEG1 */ +#define PNX833X_BASE (0xa0000000ul + 0x17E00000ul) + +#define PNX833X_REG(offs) (*((volatile unsigned long *)(PNX833X_BASE + offs))) + +/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */ + +/* Read access to multibit fields */ +#define PNX833X_BIT(val, reg, field) ((val) & PNX833X_##reg##_##field) +#define PNX833X_REGBIT(reg, field) PNX833X_BIT(PNX833X_##reg, reg, field) + +/* Use PNX833X_FIELD to extract a field from val */ +#define PNX_FIELD(cpu, val, reg, field) \ + (((val) & PNX##cpu##_##reg##_##field##_MASK) >> \ + PNX##cpu##_##reg##_##field##_SHIFT) +#define PNX833X_FIELD(val, reg, field) PNX_FIELD(833X, val, reg, field) +#define PNX8330_FIELD(val, reg, field) PNX_FIELD(8330, val, reg, field) +#define PNX8335_FIELD(val, reg, field) PNX_FIELD(8335, val, reg, field) + +/* Use PNX833X_REGFIELD to extract a field from a register */ +#define PNX833X_REGFIELD(reg, field) PNX833X_FIELD(PNX833X_##reg, reg, field) +#define PNX8330_REGFIELD(reg, field) PNX8330_FIELD(PNX8330_##reg, reg, field) +#define PNX8335_REGFIELD(reg, field) PNX8335_FIELD(PNX8335_##reg, reg, field) + + +#define PNX_WRITEFIELD(cpu, val, reg, field) \ + (PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \ + ((val) << PNX##cpu##_##reg##_##field##_SHIFT)) +#define PNX833X_WRITEFIELD(val, reg, field) \ + PNX_WRITEFIELD(833X, val, reg, field) +#define PNX8330_WRITEFIELD(val, reg, field) \ + PNX_WRITEFIELD(8330, val, reg, field) +#define PNX8335_WRITEFIELD(val, reg, field) \ + PNX_WRITEFIELD(8335, val, reg, field) + + +/* Macros to detect CPU type */ + +#define PNX833X_CONFIG_MODULE_ID PNX833X_REG(0x7FFC) +#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK 0x0000f000 +#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT 12 +#define PNX8330_CONFIG_MODULE_MAJREV 4 +#define PNX8335_CONFIG_MODULE_MAJREV 5 +#define CPU_IS_PNX8330 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ + PNX8330_CONFIG_MODULE_MAJREV) +#define CPU_IS_PNX8335 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ + PNX8335_CONFIG_MODULE_MAJREV) + + + +#define PNX833X_RESET_CONTROL PNX833X_REG(0x8004) +#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014) + +#define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs)) +#define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0) +#define PNX833X_PIC_INT_SRC PNX833X_PIC_REG(0x4) +#define PNX833X_PIC_INT_SRC_INT_SRC_MASK 0x00000FF8ul /* bits 11:3 */ +#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3 +#define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq)) + +#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228) +#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */ +#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */ +#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3 + +#define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020) +#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f +#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT 0 + +#define PNX833X_CONFIG_MUX PNX833X_REG(0x7004) +#define PNX833X_CONFIG_MUX_IDE_MUX 0x00000080 /* bit 7 */ + +#define PNX8330_CONFIG_POLYFUSE_7 PNX833X_REG(0x7040) +#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK 0x00180000 +#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT 19 + +#define PNX833X_PIO_IN PNX833X_REG(0xF000) +#define PNX833X_PIO_OUT PNX833X_REG(0xF004) +#define PNX833X_PIO_DIR PNX833X_REG(0xF008) +#define PNX833X_PIO_SEL PNX833X_REG(0xF014) +#define PNX833X_PIO_INT_EDGE PNX833X_REG(0xF020) +#define PNX833X_PIO_INT_HI PNX833X_REG(0xF024) +#define PNX833X_PIO_INT_LO PNX833X_REG(0xF028) +#define PNX833X_PIO_INT_STATUS PNX833X_REG(0xFFE0) +#define PNX833X_PIO_INT_ENABLE PNX833X_REG(0xFFE4) +#define PNX833X_PIO_INT_CLEAR PNX833X_REG(0xFFE8) +#define PNX833X_PIO_IN2 PNX833X_REG(0xF05C) +#define PNX833X_PIO_OUT2 PNX833X_REG(0xF060) +#define PNX833X_PIO_DIR2 PNX833X_REG(0xF064) +#define PNX833X_PIO_SEL2 PNX833X_REG(0xF068) + +#define PNX833X_UART0_PORTS_START (PNX833X_BASE + 0xB000) +#define PNX833X_UART0_PORTS_END (PNX833X_BASE + 0xBFFF) +#define PNX833X_UART1_PORTS_START (PNX833X_BASE + 0xC000) +#define PNX833X_UART1_PORTS_END (PNX833X_BASE + 0xCFFF) + +#define PNX833X_USB_PORTS_START (PNX833X_BASE + 0x19000) +#define PNX833X_USB_PORTS_END (PNX833X_BASE + 0x19FFF) + +#define PNX833X_CONFIG_USB PNX833X_REG(0x7008) + +#define PNX833X_I2C0_PORTS_START (PNX833X_BASE + 0xD000) +#define PNX833X_I2C0_PORTS_END (PNX833X_BASE + 0xDFFF) +#define PNX833X_I2C1_PORTS_START (PNX833X_BASE + 0xE000) +#define PNX833X_I2C1_PORTS_END (PNX833X_BASE + 0xEFFF) + +#define PNX833X_IDE_PORTS_START (PNX833X_BASE + 0x1A000) +#define PNX833X_IDE_PORTS_END (PNX833X_BASE + 0x1AFFF) +#define PNX833X_IDE_MODULE_ID PNX833X_REG(0x1AFFC) + +#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 +#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT 16 +#define PNX833X_IDE_MODULE_ID_VALUE 0xA009 + + +#define PNX833X_MIU_SEL0 PNX833X_REG(0x2004) +#define PNX833X_MIU_SEL0_TIMING PNX833X_REG(0x2008) +#define PNX833X_MIU_SEL1 PNX833X_REG(0x200C) +#define PNX833X_MIU_SEL1_TIMING PNX833X_REG(0x2010) +#define PNX833X_MIU_SEL2 PNX833X_REG(0x2014) +#define PNX833X_MIU_SEL2_TIMING PNX833X_REG(0x2018) +#define PNX833X_MIU_SEL3 PNX833X_REG(0x201C) +#define PNX833X_MIU_SEL3_TIMING PNX833X_REG(0x2020) + +#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14) +#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14 + +#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7) +#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7 + +#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9) +#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT 9 + +#define PNX833X_MIU_CONFIG_SPI PNX833X_REG(0x2000) + +#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3) +#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3 + +#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2) +#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2 + +#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1) +#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1 + +#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0) +#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT 0 + +#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \ + (PNX833X_MIU_CONFIG_SPI = \ + ((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) | \ + ((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) | \ + ((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) | \ + ((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT)) + +#define PNX8335_IP3902_PORTS_START (PNX833X_BASE + 0x2F000) +#define PNX8335_IP3902_PORTS_END (PNX833X_BASE + 0x2FFFF) +#define PNX8335_IP3902_MODULE_ID PNX833X_REG(0x2FFFC) + +#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 +#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT 16 +#define PNX8335_IP3902_MODULE_ID_VALUE 0x3902 + + /* I/O location(gets remapped)*/ +#define PNX8335_NAND_BASE 0x18000000 +/* I/O location with CLE high */ +#define PNX8335_NAND_CLE_MASK 0x00100000 +/* I/O location with ALE high */ +#define PNX8335_NAND_ALE_MASK 0x00010000 + +#define PNX8335_SATA_PORTS_START (PNX833X_BASE + 0x2E000) +#define PNX8335_SATA_PORTS_END (PNX833X_BASE + 0x2EFFF) +#define PNX8335_SATA_MODULE_ID PNX833X_REG(0x2EFFC) + +#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 +#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT 16 +#define PNX8335_SATA_MODULE_ID_VALUE 0xA099 + +#endif diff --git a/arch/mips/include/asm/mach-pnx833x/war.h b/arch/mips/include/asm/mach-pnx833x/war.h new file mode 100644 index 00000000000..82cd1e97bc2 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_PNX833X_WAR_H +#define __ASM_MIPS_MACH_PNX833X_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/mangle-port.h b/arch/mips/include/asm/mach-tx49xx/mangle-port.h new file mode 100644 index 00000000000..5e6912fdd0e --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/mangle-port.h @@ -0,0 +1,26 @@ +#ifndef __ASM_MACH_TX49XX_MANGLE_PORT_H +#define __ASM_MACH_TX49XX_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#define ioswabb(a, x) (x) +#define __mem_ioswabb(a, x) (x) +#if defined(CONFIG_TOSHIBA_RBTX4939) && \ + (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) && \ + defined(__BIG_ENDIAN) +#define NEEDS_TXX9_IOSWABW +extern u16 (*ioswabw)(volatile u16 *a, u16 x); +extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x); +#else +#define ioswabw(a, x) le16_to_cpu(x) +#define __mem_ioswabw(a, x) (x) +#endif +#define ioswabl(a, x) le32_to_cpu(x) +#define __mem_ioswabl(a, x) (x) +#define ioswabq(a, x) le64_to_cpu(x) +#define __mem_ioswabq(a, x) (x) + +#endif /* __ASM_MACH_TX49XX_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h index cdc379a0a94..199b45733a9 100644 --- a/arch/mips/include/asm/mc146818-time.h +++ b/arch/mips/include/asm/mc146818-time.h @@ -44,7 +44,7 @@ static inline int mc146818_set_rtc_mmss(unsigned long nowtime) cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); + cmos_minutes = bcd2bin(cmos_minutes); /* * since we're only adjusting minutes and seconds, @@ -60,8 +60,8 @@ static inline int mc146818_set_rtc_mmss(unsigned long nowtime) if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); + real_seconds = bin2bcd(real_seconds); + real_minutes = bin2bcd(real_minutes); } CMOS_WRITE(real_seconds, RTC_SECONDS); CMOS_WRITE(real_minutes, RTC_MINUTES); @@ -103,12 +103,12 @@ static inline unsigned long mc146818_get_cmos_time(void) } while (sec != CMOS_READ(RTC_SECONDS)); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); } spin_unlock_irqrestore(&rtc_lock, flags); year = mc146818_decode_year(year); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 979866000da..9316324d070 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -192,6 +192,7 @@ #define PM_16M 0x01ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 +#define PM_1G 0x7fffe000 #endif diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index de6d09ebbd8..e2e09b2cd26 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "R5000 " #elif defined CONFIG_CPU_R5432 #define MODULE_PROC_FAMILY "R5432 " +#elif defined CONFIG_CPU_R5500 +#define MODULE_PROC_FAMILY "R5500 " #elif defined CONFIG_CPU_R6000 #define MODULE_PROC_FAMILY "R6000 " #elif defined CONFIG_CPU_NEVADA diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 9c22571b160..813abd16255 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -80,25 +80,25 @@ enum pt_watch_style { pt_watch_style_mips64 }; struct mips32_watch_regs { - uint32_t watchlo[8]; + unsigned int watchlo[8]; /* Lower 16 bits of watchhi. */ - uint16_t watchhi[8]; + unsigned short watchhi[8]; /* Valid mask and I R W bits. * bit 0 -- 1 if W bit is usable. * bit 1 -- 1 if R bit is usable. * bit 2 -- 1 if I bit is usable. * bits 3 - 11 -- Valid watchhi mask bits. */ - uint16_t watch_masks[8]; + unsigned short watch_masks[8]; /* The number of valid watch register pairs. */ - uint32_t num_valid; + unsigned int num_valid; } __attribute__((aligned(8))); struct mips64_watch_regs { - uint64_t watchlo[8]; - uint16_t watchhi[8]; - uint16_t watch_masks[8]; - uint32_t num_valid; + unsigned long long watchlo[8]; + unsigned short watchhi[8]; + unsigned short watch_masks[8]; + unsigned int num_valid; } __attribute__((aligned(8))); struct pt_watch_regs { @@ -116,6 +116,7 @@ struct pt_watch_regs { #include <linux/compiler.h> #include <linux/linkage.h> +#include <linux/types.h> #include <asm/isadep.h> struct task_struct; diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h index 4316a3e5767..9cde0090cbf 100644 --- a/arch/mips/include/asm/txx9/generic.h +++ b/arch/mips/include/asm/txx9/generic.h @@ -86,4 +86,9 @@ void txx9_iocled_init(unsigned long baseaddr, int basenum, unsigned int num, int lowactive, const char *color, char **deftriggers); +/* 7SEG LED */ +void txx9_7segled_init(unsigned int num, + void (*putc)(unsigned int pos, unsigned char val)); +int txx9_7segled_putc(unsigned int pos, char c); + #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h index 989e7751135..0b068154054 100644 --- a/arch/mips/include/asm/txx9/tx4938.h +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -292,4 +292,17 @@ void tx4938_setup_pcierr_irq(void); void tx4938_irq_init(void); void tx4938_mtd_init(int ch); +struct tx4938ide_platform_info { + /* + * I/O port shift, for platforms with ports that are + * constantly spaced and need larger than the 1-byte + * spacing used by ata_std_ports(). + */ + unsigned int ioport_shift; + unsigned int gbus_clock; /* 0 means no PIO mode tuning. */ + unsigned int ebus_ch; +}; + +void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune); + #endif diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index d9da7112aaf..b1372c27f13 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_R5500) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 0cf15457eca..c9207b5fd92 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -286,11 +286,12 @@ static inline int __cpu_has_fpu(void) #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ | MIPS_CPU_COUNTER) -static inline void cpu_probe_legacy(struct cpuinfo_mips *c) +static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) { switch (c->processor_id & 0xff00) { case PRID_IMP_R2000: c->cputype = CPU_R2000; + __cpu_name[cpu] = "R2000"; c->isa_level = MIPS_CPU_ISA_I; c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | MIPS_CPU_NOFPUEX; @@ -299,13 +300,19 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) c->tlbsize = 64; break; case PRID_IMP_R3000: - if ((c->processor_id & 0xff) == PRID_REV_R3000A) - if (cpu_has_confreg()) + if ((c->processor_id & 0xff) == PRID_REV_R3000A) { + if (cpu_has_confreg()) { c->cputype = CPU_R3081E; - else + __cpu_name[cpu] = "R3081"; + } else { c->cputype = CPU_R3000A; - else + __cpu_name[cpu] = "R3000A"; + } + break; + } else { c->cputype = CPU_R3000; + __cpu_name[cpu] = "R3000"; + } c->isa_level = MIPS_CPU_ISA_I; c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | MIPS_CPU_NOFPUEX; @@ -315,15 +322,21 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R4000: if (read_c0_config() & CONF_SC) { - if ((c->processor_id & 0xff) >= PRID_REV_R4400) + if ((c->processor_id & 0xff) >= PRID_REV_R4400) { c->cputype = CPU_R4400PC; - else + __cpu_name[cpu] = "R4400PC"; + } else { c->cputype = CPU_R4000PC; + __cpu_name[cpu] = "R4000PC"; + } } else { - if ((c->processor_id & 0xff) >= PRID_REV_R4400) + if ((c->processor_id & 0xff) >= PRID_REV_R4400) { c->cputype = CPU_R4400SC; - else + __cpu_name[cpu] = "R4400SC"; + } else { c->cputype = CPU_R4000SC; + __cpu_name[cpu] = "R4000SC"; + } } c->isa_level = MIPS_CPU_ISA_III; @@ -336,25 +349,34 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) switch (c->processor_id & 0xf0) { case PRID_REV_VR4111: c->cputype = CPU_VR4111; + __cpu_name[cpu] = "NEC VR4111"; break; case PRID_REV_VR4121: c->cputype = CPU_VR4121; + __cpu_name[cpu] = "NEC VR4121"; break; case PRID_REV_VR4122: - if ((c->processor_id & 0xf) < 0x3) + if ((c->processor_id & 0xf) < 0x3) { c->cputype = CPU_VR4122; - else + __cpu_name[cpu] = "NEC VR4122"; + } else { c->cputype = CPU_VR4181A; + __cpu_name[cpu] = "NEC VR4181A"; + } break; case PRID_REV_VR4130: - if ((c->processor_id & 0xf) < 0x4) + if ((c->processor_id & 0xf) < 0x4) { c->cputype = CPU_VR4131; - else + __cpu_name[cpu] = "NEC VR4131"; + } else { c->cputype = CPU_VR4133; + __cpu_name[cpu] = "NEC VR4133"; + } break; default: printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); c->cputype = CPU_VR41XX; + __cpu_name[cpu] = "NEC Vr41xx"; break; } c->isa_level = MIPS_CPU_ISA_III; @@ -363,6 +385,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R4300: c->cputype = CPU_R4300; + __cpu_name[cpu] = "R4300"; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -370,6 +393,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R4600: c->cputype = CPU_R4600; + __cpu_name[cpu] = "R4600"; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -384,6 +408,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) * it's c0_prid id number with the TX3900. */ c->cputype = CPU_R4650; + __cpu_name[cpu] = "R4650"; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -395,25 +420,26 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { c->cputype = CPU_TX3927; + __cpu_name[cpu] = "TX3927"; c->tlbsize = 64; } else { switch (c->processor_id & 0xff) { case PRID_REV_TX3912: c->cputype = CPU_TX3912; + __cpu_name[cpu] = "TX3912"; c->tlbsize = 32; break; case PRID_REV_TX3922: c->cputype = CPU_TX3922; + __cpu_name[cpu] = "TX3922"; c->tlbsize = 64; break; - default: - c->cputype = CPU_UNKNOWN; - break; } } break; case PRID_IMP_R4700: c->cputype = CPU_R4700; + __cpu_name[cpu] = "R4700"; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -421,6 +447,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_TX49: c->cputype = CPU_TX49XX; + __cpu_name[cpu] = "R49XX"; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_LLSC; if (!(c->processor_id & 0x08)) @@ -429,6 +456,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R5000: c->cputype = CPU_R5000; + __cpu_name[cpu] = "R5000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -436,6 +464,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R5432: c->cputype = CPU_R5432; + __cpu_name[cpu] = "R5432"; c->isa_level = MIPS_CPU_ISA_IV; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_WATCH | MIPS_CPU_LLSC; @@ -443,6 +472,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R5500: c->cputype = CPU_R5500; + __cpu_name[cpu] = "R5500"; c->isa_level = MIPS_CPU_ISA_IV; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_WATCH | MIPS_CPU_LLSC; @@ -450,6 +480,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_NEVADA: c->cputype = CPU_NEVADA; + __cpu_name[cpu] = "Nevada"; c->isa_level = MIPS_CPU_ISA_IV; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_DIVEC | MIPS_CPU_LLSC; @@ -457,6 +488,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R6000: c->cputype = CPU_R6000; + __cpu_name[cpu] = "R6000"; c->isa_level = MIPS_CPU_ISA_II; c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | MIPS_CPU_LLSC; @@ -464,6 +496,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R6000A: c->cputype = CPU_R6000A; + __cpu_name[cpu] = "R6000A"; c->isa_level = MIPS_CPU_ISA_II; c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | MIPS_CPU_LLSC; @@ -471,6 +504,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_RM7000: c->cputype = CPU_RM7000; + __cpu_name[cpu] = "RM7000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -486,6 +520,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_RM9000: c->cputype = CPU_RM9000; + __cpu_name[cpu] = "RM9000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -500,6 +535,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R8000: c->cputype = CPU_R8000; + __cpu_name[cpu] = "RM8000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | @@ -508,6 +544,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R10000: c->cputype = CPU_R10000; + __cpu_name[cpu] = "R10000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | @@ -517,6 +554,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R12000: c->cputype = CPU_R12000; + __cpu_name[cpu] = "R12000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | @@ -526,6 +564,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_R14000: c->cputype = CPU_R14000; + __cpu_name[cpu] = "R14000"; c->isa_level = MIPS_CPU_ISA_IV; c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | @@ -535,6 +574,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_LOONGSON2: c->cputype = CPU_LOONGSON2; + __cpu_name[cpu] = "ICT Loongson-2"; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC | @@ -652,21 +692,24 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) static void __cpuinit decode_configs(struct cpuinfo_mips *c) { + int ok; + /* MIPS32 or MIPS64 compliant CPU. */ c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK; c->scache.flags = MIPS_CACHE_NOT_PRESENT; - /* Read Config registers. */ - if (!decode_config0(c)) - return; /* actually worth a panic() */ - if (!decode_config1(c)) - return; - if (!decode_config2(c)) - return; - if (!decode_config3(c)) - return; + ok = decode_config0(c); /* Read Config registers. */ + BUG_ON(!ok); /* Arch spec violation! */ + if (ok) + ok = decode_config1(c); + if (ok) + ok = decode_config2(c); + if (ok) + ok = decode_config3(c); + + mips_probe_watch_registers(c); } #ifdef CONFIG_CPU_MIPSR2 @@ -675,52 +718,62 @@ extern void spram_config(void); static inline void spram_config(void) {} #endif -static inline void cpu_probe_mips(struct cpuinfo_mips *c) +static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - mips_probe_watch_registers(c); switch (c->processor_id & 0xff00) { case PRID_IMP_4KC: c->cputype = CPU_4KC; + __cpu_name[cpu] = "MIPS 4Kc"; break; case PRID_IMP_4KEC: c->cputype = CPU_4KEC; + __cpu_name[cpu] = "MIPS 4KEc"; break; case PRID_IMP_4KECR2: c->cputype = CPU_4KEC; + __cpu_name[cpu] = "MIPS 4KEc"; break; case PRID_IMP_4KSC: case PRID_IMP_4KSD: c->cputype = CPU_4KSC; + __cpu_name[cpu] = "MIPS 4KSc"; break; case PRID_IMP_5KC: c->cputype = CPU_5KC; + __cpu_name[cpu] = "MIPS 5Kc"; break; case PRID_IMP_20KC: c->cputype = CPU_20KC; + __cpu_name[cpu] = "MIPS 20Kc"; break; case PRID_IMP_24K: case PRID_IMP_24KE: c->cputype = CPU_24K; + __cpu_name[cpu] = "MIPS 24Kc"; break; case PRID_IMP_25KF: c->cputype = CPU_25KF; + __cpu_name[cpu] = "MIPS 25Kc"; break; case PRID_IMP_34K: c->cputype = CPU_34K; + __cpu_name[cpu] = "MIPS 34Kc"; break; case PRID_IMP_74K: c->cputype = CPU_74K; + __cpu_name[cpu] = "MIPS 74Kc"; break; case PRID_IMP_1004K: c->cputype = CPU_1004K; + __cpu_name[cpu] = "MIPS 1004Kc"; break; } spram_config(); } -static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) +static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { @@ -729,23 +782,31 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) switch ((c->processor_id >> 24) & 0xff) { case 0: c->cputype = CPU_AU1000; + __cpu_name[cpu] = "Au1000"; break; case 1: c->cputype = CPU_AU1500; + __cpu_name[cpu] = "Au1500"; break; case 2: c->cputype = CPU_AU1100; + __cpu_name[cpu] = "Au1100"; break; case 3: c->cputype = CPU_AU1550; + __cpu_name[cpu] = "Au1550"; break; case 4: c->cputype = CPU_AU1200; - if (2 == (c->processor_id & 0xff)) + __cpu_name[cpu] = "Au1200"; + if ((c->processor_id & 0xff) == 2) { c->cputype = CPU_AU1250; + __cpu_name[cpu] = "Au1250"; + } break; case 5: c->cputype = CPU_AU1210; + __cpu_name[cpu] = "Au1210"; break; default: panic("Unknown Au Core!"); @@ -755,154 +816,67 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) } } -static inline void cpu_probe_sibyte(struct cpuinfo_mips *c) +static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { case PRID_IMP_SB1: c->cputype = CPU_SB1; + __cpu_name[cpu] = "SiByte SB1"; /* FPU in pass1 is known to have issues. */ if ((c->processor_id & 0xff) < 0x02) c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); break; case PRID_IMP_SB1A: c->cputype = CPU_SB1A; + __cpu_name[cpu] = "SiByte SB1A"; break; } } -static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) +static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { case PRID_IMP_SR71000: c->cputype = CPU_SR71000; + __cpu_name[cpu] = "Sandcraft SR71000"; c->scache.ways = 8; c->tlbsize = 64; break; } } -static inline void cpu_probe_nxp(struct cpuinfo_mips *c) +static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { case PRID_IMP_PR4450: c->cputype = CPU_PR4450; + __cpu_name[cpu] = "Philips PR4450"; c->isa_level = MIPS_CPU_ISA_M32R1; break; - default: - panic("Unknown NXP Core!"); /* REVISIT: die? */ - break; } } - -static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) +static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { case PRID_IMP_BCM3302: c->cputype = CPU_BCM3302; + __cpu_name[cpu] = "Broadcom BCM3302"; break; case PRID_IMP_BCM4710: c->cputype = CPU_BCM4710; - break; - default: - c->cputype = CPU_UNKNOWN; + __cpu_name[cpu] = "Broadcom BCM4710"; break; } } const char *__cpu_name[NR_CPUS]; -/* - * Name a CPU - */ -static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c) -{ - const char *name = NULL; - - switch (c->cputype) { - case CPU_UNKNOWN: name = "unknown"; break; - case CPU_R2000: name = "R2000"; break; - case CPU_R3000: name = "R3000"; break; - case CPU_R3000A: name = "R3000A"; break; - case CPU_R3041: name = "R3041"; break; - case CPU_R3051: name = "R3051"; break; - case CPU_R3052: name = "R3052"; break; - case CPU_R3081: name = "R3081"; break; - case CPU_R3081E: name = "R3081E"; break; - case CPU_R4000PC: name = "R4000PC"; break; - case CPU_R4000SC: name = "R4000SC"; break; - case CPU_R4000MC: name = "R4000MC"; break; - case CPU_R4200: name = "R4200"; break; - case CPU_R4400PC: name = "R4400PC"; break; - case CPU_R4400SC: name = "R4400SC"; break; - case CPU_R4400MC: name = "R4400MC"; break; - case CPU_R4600: name = "R4600"; break; - case CPU_R6000: name = "R6000"; break; - case CPU_R6000A: name = "R6000A"; break; - case CPU_R8000: name = "R8000"; break; - case CPU_R10000: name = "R10000"; break; - case CPU_R12000: name = "R12000"; break; - case CPU_R14000: name = "R14000"; break; - case CPU_R4300: name = "R4300"; break; - case CPU_R4650: name = "R4650"; break; - case CPU_R4700: name = "R4700"; break; - case CPU_R5000: name = "R5000"; break; - case CPU_R5000A: name = "R5000A"; break; - case CPU_R4640: name = "R4640"; break; - case CPU_NEVADA: name = "Nevada"; break; - case CPU_RM7000: name = "RM7000"; break; - case CPU_RM9000: name = "RM9000"; break; - case CPU_R5432: name = "R5432"; break; - case CPU_4KC: name = "MIPS 4Kc"; break; - case CPU_5KC: name = "MIPS 5Kc"; break; - case CPU_R4310: name = "R4310"; break; - case CPU_SB1: name = "SiByte SB1"; break; - case CPU_SB1A: name = "SiByte SB1A"; break; - case CPU_TX3912: name = "TX3912"; break; - case CPU_TX3922: name = "TX3922"; break; - case CPU_TX3927: name = "TX3927"; break; - case CPU_AU1000: name = "Au1000"; break; - case CPU_AU1500: name = "Au1500"; break; - case CPU_AU1100: name = "Au1100"; break; - case CPU_AU1550: name = "Au1550"; break; - case CPU_AU1200: name = "Au1200"; break; - case CPU_AU1210: name = "Au1210"; break; - case CPU_AU1250: name = "Au1250"; break; - case CPU_4KEC: name = "MIPS 4KEc"; break; - case CPU_4KSC: name = "MIPS 4KSc"; break; - case CPU_VR41XX: name = "NEC Vr41xx"; break; - case CPU_R5500: name = "R5500"; break; - case CPU_TX49XX: name = "TX49xx"; break; - case CPU_20KC: name = "MIPS 20Kc"; break; - case CPU_24K: name = "MIPS 24K"; break; - case CPU_25KF: name = "MIPS 25Kf"; break; - case CPU_34K: name = "MIPS 34K"; break; - case CPU_1004K: name = "MIPS 1004K"; break; - case CPU_74K: name = "MIPS 74K"; break; - case CPU_VR4111: name = "NEC VR4111"; break; - case CPU_VR4121: name = "NEC VR4121"; break; - case CPU_VR4122: name = "NEC VR4122"; break; - case CPU_VR4131: name = "NEC VR4131"; break; - case CPU_VR4133: name = "NEC VR4133"; break; - case CPU_VR4181: name = "NEC VR4181"; break; - case CPU_VR4181A: name = "NEC VR4181A"; break; - case CPU_SR71000: name = "Sandcraft SR71000"; break; - case CPU_BCM3302: name = "Broadcom BCM3302"; break; - case CPU_BCM4710: name = "Broadcom BCM4710"; break; - case CPU_PR4450: name = "Philips PR4450"; break; - case CPU_LOONGSON2: name = "ICT Loongson-2"; break; - default: - BUG(); - } - - return name; -} - __cpuinit void cpu_probe(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -915,30 +889,31 @@ __cpuinit void cpu_probe(void) c->processor_id = read_c0_prid(); switch (c->processor_id & 0xff0000) { case PRID_COMP_LEGACY: - cpu_probe_legacy(c); + cpu_probe_legacy(c, cpu); break; case PRID_COMP_MIPS: - cpu_probe_mips(c); + cpu_probe_mips(c, cpu); break; case PRID_COMP_ALCHEMY: - cpu_probe_alchemy(c); + cpu_probe_alchemy(c, cpu); break; case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); + cpu_probe_sibyte(c, cpu); break; case PRID_COMP_BROADCOM: - cpu_probe_broadcom(c); + cpu_probe_broadcom(c, cpu); break; case PRID_COMP_SANDCRAFT: - cpu_probe_sandcraft(c); + cpu_probe_sandcraft(c, cpu); break; case PRID_COMP_NXP: - cpu_probe_nxp(c); + cpu_probe_nxp(c, cpu); break; - default: - c->cputype = CPU_UNKNOWN; } + BUG_ON(!__cpu_name[cpu]); + BUG_ON(c->cputype == CPU_UNKNOWN); + /* * Platform code can force the cpu type to optimize code * generation. In that case be sure the cpu type is correctly @@ -958,8 +933,6 @@ __cpuinit void cpu_probe(void) } } - __cpu_name[cpu] = cpu_to_name(c); - if (cpu_has_mips_r2) c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; else diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 5e75a316f6b..759f68066b5 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -180,7 +180,7 @@ bad_stack: * The system call does not exist in this kernel */ illegal_syscall: - li v0, -ENOSYS # error + li v0, ENOSYS # error sw v0, PT_R2(sp) li t0, 1 # set error flag sw t0, PT_R7(sp) @@ -293,7 +293,7 @@ bad_alignment: jr t2 /* Unreached */ -einval: li v0, -EINVAL +einval: li v0, -ENOSYS jr ra END(sys_syscall) diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 3d58204c9d4..a9e17161899 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -117,7 +117,7 @@ syscall_trace_entry: illegal_syscall: /* This also isn't a 64-bit syscall, throw an error. */ - li v0, -ENOSYS # error + li v0, ENOSYS # error sd v0, PT_R2(sp) li t0, 1 # set error flag sd t0, PT_R7(sp) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 16f8edfe5cd..4430a1f8fdf 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -601,8 +601,8 @@ static int __init debugfs_mips(void) struct dentry *d; d = debugfs_create_dir("mips", NULL); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; mips_debugfs_dir = d; return 0; } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 7b59cfb7e60..8bf88faf5af 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -163,8 +163,10 @@ static void stop_this_cpu(void *dummy) * Remove this CPU: */ cpu_clear(smp_processor_id(), cpu_online_map); - local_irq_enable(); /* May need to service _machine_restart IPI */ - for (;;); /* Wait if available. */ + for (;;) { + if (cpu_wait) + (*cpu_wait)(); /* Wait if available. */ + } } void smp_send_stop(void) @@ -193,12 +195,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* preload SMP state for boot cpu */ void __devinit smp_prepare_boot_cpu(void) { - /* - * This assumes that bootup is always handled by the processor - * with the logic and physical number 0. - */ - __cpu_number_map[0] = 0; - __cpu_logical_map[0] = 0; cpu_set(0, phys_cpu_present_map); cpu_set(0, cpu_online_map); cpu_set(0, cpu_callin_map); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 80b9e070c20..353056110f2 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -32,6 +32,7 @@ #include <asm/cpu.h> #include <asm/dsp.h> #include <asm/fpu.h> +#include <asm/fpu_emulator.h> #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> #include <asm/module.h> @@ -722,6 +723,21 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code, die_if_kernel("Kernel bug detected", regs); force_sig(SIGTRAP, current); break; + case BRK_MEMU: + /* + * Address errors may be deliberately induced by the FPU + * emulator to retake control of the CPU after executing the + * instruction in the delay slot of an emulated branch. + * + * Terminate if exception was recognized as a delay slot return + * otherwise handle as normal. + */ + if (do_dsemulret(regs)) + return; + + die_if_kernel("Math emu break/trap", regs); + force_sig(SIGTRAP, current); + break; default: scnprintf(b, sizeof(b), "%s instruction in kernel code", str); die_if_kernel(b, regs); @@ -1555,6 +1571,8 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, #ifdef CONFIG_64BIT unsigned long uncached_ebase = TO_UNCAC(ebase); #endif + if (cpu_has_mips_r2) + ebase += (read_c0_ebase() & 0x3ffff000); if (!addr) panic(panic_null_cerr); @@ -1588,8 +1606,11 @@ void __init trap_init(void) if (cpu_has_veic || cpu_has_vint) ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); - else + else { ebase = CAC_BASE; + if (cpu_has_mips_r2) + ebase += (read_c0_ebase() & 0x3ffff000); + } per_cpu_trap_init(); @@ -1697,11 +1718,11 @@ void __init trap_init(void) if (cpu_has_vce) /* Special exception: R4[04]00 uses also the divec space. */ - memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100); + memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100); else if (cpu_has_4kex) - memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80); + memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80); else - memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80); + memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80); signal_init(); #ifdef CONFIG_MIPS32_COMPAT diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index c327b21bca8..bf4c4a979ab 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -499,22 +499,10 @@ sigill: asmlinkage void do_ade(struct pt_regs *regs) { - extern int do_dsemulret(struct pt_regs *); unsigned int __user *pc; mm_segment_t seg; /* - * Address errors may be deliberately induced by the FPU emulator to - * retake control of the CPU after executing the instruction in the - * delay slot of an emulated branch. - */ - /* Terminate if exception was recognized as a delay slot return */ - if (do_dsemulret(regs)) - return; - - /* Otherwise handle as normal */ - - /* * Did we catch a fault trying to load an instruction? * Or are we running in MIPS16 mode? */ @@ -560,12 +548,12 @@ static int __init debugfs_unaligned(void) return -ENODEV; d = debugfs_create_u32("unaligned_instructions", S_IRUGO, mips_debugfs_dir, &unaligned_instructions); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, mips_debugfs_dir, &unaligned_action); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; return 0; } __initcall(debugfs_unaligned); diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c index c1e41f15cc7..8be03a8e1ad 100644 --- a/arch/mips/lemote/lm2e/pci.c +++ b/arch/mips/lemote/lm2e/pci.c @@ -30,19 +30,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <asm/mips-boards/bonito64.h> +#include <asm/mach-lemote/pci.h> extern struct pci_ops bonito64_pci_ops; static struct resource loongson2e_pci_mem_resource = { .name = "LOONGSON2E PCI MEM", - .start = 0x14000000UL, - .end = 0x1fffffffUL, + .start = LOONGSON2E_PCI_MEM_START, + .end = LOONGSON2E_PCI_MEM_END, .flags = IORESOURCE_MEM, }; static struct resource loongson2e_pci_io_resource = { .name = "LOONGSON2E PCI IO MEM", - .start = 0x00004000UL, + .start = LOONGSON2E_PCI_IO_START, .end = IO_SPACE_LIMIT, .flags = IORESOURCE_IO, }; @@ -82,6 +83,12 @@ static void __init ict_pcimap(void) static int __init pcibios_init(void) { ict_pcimap(); + + loongson2e_pci_controller.io_map_base = + (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE, + loongson2e_pci_io_resource.end - + loongson2e_pci_io_resource.start + 1); + register_pci_controller(&loongson2e_pci_controller); return 0; diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c index 2cc6745991a..ebd6ceaef2f 100644 --- a/arch/mips/lemote/lm2e/setup.c +++ b/arch/mips/lemote/lm2e/setup.c @@ -34,6 +34,7 @@ #include <asm/mc146818-time.h> #include <asm/time.h> #include <asm/wbflush.h> +#include <asm/mach-lemote/pci.h> #ifdef CONFIG_VT #include <linux/console.h> @@ -42,12 +43,6 @@ extern void mips_reboot_setup(void); -#ifdef CONFIG_64BIT -#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p))) -#else -#define PTR_PAD(p) (p) -#endif - unsigned long cpu_clock_freq; unsigned long bus_clock; unsigned int memsize; @@ -80,8 +75,8 @@ static void wbflush_loongson2e(void) void __init plat_mem_setup(void) { - set_io_port_base(PTR_PAD(0xbfd00000)); - + set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE, + IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1)); mips_reboot_setup(); __wbflush = wbflush_loongson2e; diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 8810dfb915d..dbcf6511b74 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300) += dump_tlb.o obj-$(CONFIG_CPU_R4X00) += dump_tlb.o obj-$(CONFIG_CPU_R5000) += dump_tlb.o obj-$(CONFIG_CPU_R5432) += dump_tlb.o +obj-$(CONFIG_CPU_R5500) += dump_tlb.o obj-$(CONFIG_CPU_R6000) += obj-$(CONFIG_CPU_R8000) += obj-$(CONFIG_CPU_RM7000) += dump_tlb.o diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 465ff0ec85b..779821cd54a 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask) case PM_16M: return "16Mb"; case PM_64M: return "64Mb"; case PM_256M: return "256Mb"; + case PM_1G: return "1Gb"; #endif } return ""; diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index b08fc65c13a..890f77927d6 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -48,7 +48,6 @@ #include <asm/branch.h> #include "ieee754.h" -#include "dsemul.h" /* Strap kernel emulator for full MIPS IV emulation */ @@ -346,9 +345,6 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) /* cop control register rd -> gpr[rt] */ u32 value; - if (ir == CP1UNDEF) { - return do_dsemulret(xcp); - } if (MIPSInst_RD(ir) == FPCREG_CSR) { value = ctx->fcr31; value = (value & ~0x3) | mips_rm[value & 0x3]; @@ -1299,12 +1295,12 @@ static int __init debugfs_fpuemu(void) if (!mips_debugfs_dir) return -ENODEV; dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); - if (IS_ERR(dir)) - return PTR_ERR(dir); + if (!dir) + return -ENOMEM; for (i = 0; i < ARRAY_SIZE(vars); i++) { d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; } return 0; } diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index 653e325849e..df7b9d928ef 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -18,7 +18,6 @@ #include <asm/fpu_emulator.h> #include "ieee754.h" -#include "dsemul.h" /* Strap kernel emulator for full MIPS IV emulation */ @@ -94,7 +93,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) return SIGBUS; err = __put_user(ir, &fr->emul); - err |= __put_user((mips_instruction)BADINST, &fr->badinst); + err |= __put_user((mips_instruction)BREAK_MATH, &fr->badinst); err |= __put_user((mips_instruction)BD_COOKIE, &fr->cookie); err |= __put_user(cpc, &fr->epc); @@ -130,13 +129,13 @@ int do_dsemulret(struct pt_regs *xcp) /* * Do some sanity checking on the stackframe: * - * - Is the instruction pointed to by the EPC an BADINST? + * - Is the instruction pointed to by the EPC an BREAK_MATH? * - Is the following memory word the BD_COOKIE? */ err = __get_user(insn, &fr->badinst); err |= __get_user(cookie, &fr->cookie); - if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) { + if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) { fpuemustats.errors++; return 0; } diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h deleted file mode 100644 index 091f0e76730..00000000000 --- a/arch/mips/math-emu/dsemul.h +++ /dev/null @@ -1,17 +0,0 @@ -extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc); -extern int do_dsemulret(struct pt_regs *xcp); - -/* Instruction which will always cause an address error */ -#define AdELOAD 0x8c000001 /* lw $0,1($0) */ -/* Instruction which will plainly cause a CP1 exception when FPU is disabled */ -#define CP1UNDEF 0x44400001 /* cfc1 $0,$0 undef */ - -/* Instruction inserted following the badinst to further tag the sequence */ -#define BD_COOKIE 0x0000bd36 /* tne $0,$0 with baggage */ - -/* Setup which instruction to use for trampoline */ -#ifdef STANDALONE_EMULATOR -#define BADINST CP1UNDEF -#else -#define BADINST AdELOAD -#endif diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 44e8dd8106b..95ba32b5b72 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o tlb-r4k.o +obj-$(CONFIG_CPU_R5500) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o tlb-r4k.o diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 891312f8e5a..5b98d0e731c 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -324,7 +324,6 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, if (cpu_is_noncoherent_r10000(dev)) __dma_sync((unsigned long)page_address(sg_page(sg)), sg->length, direction); - plat_unmap_dma_mem(sg->dma_address); } } @@ -342,7 +341,6 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele if (!plat_device_is_coherent(dev)) __dma_sync((unsigned long)page_address(sg_page(sg)), sg->length, direction); - plat_unmap_dma_mem(sg->dma_address); } } diff --git a/arch/mips/nxp/pnx833x/common/Makefile b/arch/mips/nxp/pnx833x/common/Makefile new file mode 100644 index 00000000000..4a16f3b503b --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/Makefile @@ -0,0 +1,3 @@ +obj-y := interrupts.o platform.o prom.o setup.o reset.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c new file mode 100644 index 00000000000..30533ba200e --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/interrupts.c @@ -0,0 +1,380 @@ +/* + * interrupts.c: Interrupt mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/hardirq.h> +#include <linux/interrupt.h> +#include <asm/mipsregs.h> +#include <asm/irq_cpu.h> +#include <irq.h> +#include <irq-mapping.h> +#include <gpio.h> + +static int mips_cpu_timer_irq; + +static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] = +{ + 0, /* unused */ + 4, /* PNX833X_PIC_I2C0_INT 1 */ + 4, /* PNX833X_PIC_I2C1_INT 2 */ + 1, /* PNX833X_PIC_UART0_INT 3 */ + 1, /* PNX833X_PIC_UART1_INT 4 */ + 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ + 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ + 7, /* PNX833X_PIC_GPIO_INT 7 */ + 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ + 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ + 4, /* PNX833X_PIC_CONFIG_INT 10 */ + 4, /* PNX833X_PIC_AOI_INT 11 */ + 9, /* PNX833X_PIC_SYNC_INT 12 */ + 9, /* PNX8335_PIC_SATA_INT 13 */ + 4, /* PNX833X_PIC_OSD_INT 14 */ + 9, /* PNX833X_PIC_DISP1_INT 15 */ + 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ + 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ + 4, /* PNX833X_PIC_VC_INT 18 */ + 4, /* PNX833X_PIC_SC_INT 19 */ + 9, /* PNX833X_PIC_IDE_INT 20 */ + 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ + 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ + 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ + 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ + 4, /* PNX833X_PIC_TS_OUT_INT 25 */ + 4, /* PNX833X_PIC_IR_INT 26 */ + 3, /* PNX833X_PIC_VMSP1_INT 27 */ + 3, /* PNX833X_PIC_VMSP2_INT 28 */ + 4, /* PNX833X_PIC_PIBC_INT 29 */ + 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ + 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ + 5, /* PNX833X_PIC_USB_INT 32 */ + 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ + 4, /* PNX833X_PIC_CLOCK_INT 34 */ + 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ + 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ +#if defined(CONFIG_SOC_PNX8335) + 4, /* PNX8335_PIC_MIU_INT 37 */ + 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ + 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ + 9, /* PNX8335_PIC_DISP_HD_INT 40 */ + 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ + 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ + 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ + 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ + 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */ + 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */ + 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ + 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ + 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ + 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ + 4, /* PNX8335_PIC_PIBCS_INT 51 */ + 12, /* PNX8335_PIC_ETHERNET_INT 52 */ + 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ + 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ + 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ + 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ + 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ +#endif +}; + +static void pnx833x_timer_dispatch(void) +{ + do_IRQ(mips_cpu_timer_irq); +} + +static void pic_dispatch(void) +{ + unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC); + + if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) { + unsigned long priority = PNX833X_PIC_INT_PRIORITY; + PNX833X_PIC_INT_PRIORITY = irq_prio[irq]; + + if (irq == PNX833X_PIC_GPIO_INT) { + unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE; + int pin; + while ((pin = ffs(mask & 0xffff))) { + pin -= 1; + do_IRQ(PNX833X_GPIO_IRQ_BASE + pin); + mask &= ~(1 << pin); + } + } else { + do_IRQ(irq + PNX833X_PIC_IRQ_BASE); + } + + PNX833X_PIC_INT_PRIORITY = priority; + } else { + printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP4) + pic_dispatch(); + else if (pending & STATUSF_IP7) + do_IRQ(PNX833X_TIMER_IRQ); + else + spurious_interrupt(); +} + +static inline void pnx833x_hard_enable_pic_irq(unsigned int irq) +{ + /* Currently we do this by setting IRQ priority to 1. + If priority support is being implemented, 1 should be repalced + by a better value. */ + PNX833X_PIC_INT_REG(irq) = irq_prio[irq]; +} + +static inline void pnx833x_hard_disable_pic_irq(unsigned int irq) +{ + /* Disable IRQ by writing setting it's priority to 0 */ + PNX833X_PIC_INT_REG(irq) = 0; +} + +static int irqflags[PNX833X_PIC_NUM_IRQ]; /* initialized by zeroes */ +#define IRQFLAG_STARTED 1 +#define IRQFLAG_DISABLED 2 + +static DEFINE_SPINLOCK(pnx833x_irq_lock); + +static unsigned int pnx833x_startup_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */ + pnx833x_hard_enable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + return 0; +} + +static void pnx833x_shutdown_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] = 0; /* not started */ + pnx833x_hard_disable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_enable_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] &= ~IRQFLAG_DISABLED; + if (irqflags[pic_irq] == IRQFLAG_STARTED) + pnx833x_hard_enable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_disable_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] |= IRQFLAG_DISABLED; + pnx833x_hard_disable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_ack_pic_irq(unsigned int irq) +{ +} + +static void pnx833x_end_pic_irq(unsigned int irq) +{ +} + +static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); + +static unsigned int pnx833x_startup_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_enable_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + return 0; +} + +static void pnx833x_enable_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_enable_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static void pnx833x_disable_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_disable_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static void pnx833x_ack_gpio_irq(unsigned int irq) +{ +} + +static void pnx833x_end_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_clear_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + int gpio_mode; + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + gpio_mode = GPIO_INT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_mode = GPIO_INT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + gpio_mode = GPIO_INT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_mode = GPIO_INT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_mode = GPIO_INT_LEVEL_LOW; + break; + default: + gpio_mode = GPIO_INT_NONE; + break; + } + + pnx833x_gpio_setup_irq(gpio_mode, pin); + + return 0; +} + +static struct irq_chip pnx833x_pic_irq_type = { + .typename = "PNX-PIC", + .startup = pnx833x_startup_pic_irq, + .shutdown = pnx833x_shutdown_pic_irq, + .enable = pnx833x_enable_pic_irq, + .disable = pnx833x_disable_pic_irq, + .ack = pnx833x_ack_pic_irq, + .end = pnx833x_end_pic_irq +}; + +static struct irq_chip pnx833x_gpio_irq_type = { + .typename = "PNX-GPIO", + .startup = pnx833x_startup_gpio_irq, + .shutdown = pnx833x_disable_gpio_irq, + .enable = pnx833x_enable_gpio_irq, + .disable = pnx833x_disable_gpio_irq, + .ack = pnx833x_ack_gpio_irq, + .end = pnx833x_end_gpio_irq, + .set_type = pnx833x_set_type_gpio_irq +}; + +void __init arch_init_irq(void) +{ + unsigned int irq; + + /* setup standard internal cpu irqs */ + mips_cpu_irq_init(); + + /* Set IRQ information in irq_desc */ + for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) { + pnx833x_hard_disable_pic_irq(irq); + set_irq_chip_and_handler(irq, &pnx833x_pic_irq_type, handle_simple_irq); + } + + for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++) + set_irq_chip_and_handler(irq, &pnx833x_gpio_irq_type, handle_simple_irq); + + /* Set PIC priority limiter register to 0 */ + PNX833X_PIC_INT_PRIORITY = 0; + + /* Setup GPIO IRQ dispatching */ + pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT); + + /* Enable PIC IRQs (HWIRQ2) */ + if (cpu_has_vint) + set_vi_handler(4, pic_dispatch); + + write_c0_status(read_c0_status() | IE_IRQ2); +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ + if (cpu_has_vint) + set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch); + + mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + return mips_cpu_timer_irq; +} + +void __init plat_time_init(void) +{ + /* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */ + + extern unsigned long mips_hpt_frequency; + unsigned long reg = PNX833X_CLOCK_CPUCP_CTL; + + if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) { + /* Functional clock is disabled so use crystal frequency */ + mips_hpt_frequency = 25; + } else { +#if defined(CONFIG_SOC_PNX8335) + /* Functional clock is enabled, so get clock multiplier */ + mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ)); +#else + static const unsigned long int freq[4] = {240, 160, 120, 80}; + mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)]; +#endif + } + + printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency); + + mips_hpt_frequency *= 500000; +} + diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/nxp/pnx833x/common/platform.c new file mode 100644 index 00000000000..b1ccbcc18f7 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/platform.c @@ -0,0 +1,319 @@ +/* + * platform.c: platform support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/resource.h> +#include <linux/serial.h> +#include <linux/serial_pnx8xxx.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#ifdef CONFIG_I2C_PNX0105 +/* Until i2c driver available in kernel.*/ +#include <linux/i2c-pnx0105.h> +#endif + +#include <irq.h> +#include <irq-mapping.h> +#include <pnx833x.h> + +static u64 uart_dmamask = DMA_32BIT_MASK; + +static struct resource pnx833x_uart_resources[] = { + [0] = { + .start = PNX833X_UART0_PORTS_START, + .end = PNX833X_UART0_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX833X_PIC_UART0_INT, + .end = PNX833X_PIC_UART0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = PNX833X_UART1_PORTS_START, + .end = PNX833X_UART1_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = PNX833X_PIC_UART1_INT, + .end = PNX833X_PIC_UART1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct pnx8xxx_port pnx8xxx_ports[] = { + [0] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX833X_UART0_PORTS_START, + .mapbase = PNX833X_UART0_PORTS_START, + .irq = PNX833X_PIC_UART0_INT, + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX833X_UART1_PORTS_START, + .mapbase = PNX833X_UART1_PORTS_START, + .irq = PNX833X_PIC_UART1_INT, + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, +}; + +static struct platform_device pnx833x_uart_device = { + .name = "pnx8xxx-uart", + .id = -1, + .dev = { + .dma_mask = &uart_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = pnx8xxx_ports, + }, + .num_resources = ARRAY_SIZE(pnx833x_uart_resources), + .resource = pnx833x_uart_resources, +}; + +static u64 ehci_dmamask = DMA_32BIT_MASK; + +static struct resource pnx833x_usb_ehci_resources[] = { + [0] = { + .start = PNX833X_USB_PORTS_START, + .end = PNX833X_USB_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX833X_PIC_USB_INT, + .end = PNX833X_PIC_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_usb_ehci_device = { + .name = "pnx833x-ehci", + .id = -1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), + .resource = pnx833x_usb_ehci_resources, +}; + +#ifdef CONFIG_I2C_PNX0105 +static struct resource pnx833x_i2c0_resources[] = { + { + .start = PNX833X_I2C0_PORTS_START, + .end = PNX833X_I2C0_PORTS_END, + .flags = IORESOURCE_MEM, + }, + { + .start = PNX833X_PIC_I2C0_INT, + .end = PNX833X_PIC_I2C0_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource pnx833x_i2c1_resources[] = { + { + .start = PNX833X_I2C1_PORTS_START, + .end = PNX833X_I2C1_PORTS_END, + .flags = IORESOURCE_MEM, + }, + { + .start = PNX833X_PIC_I2C1_INT, + .end = PNX833X_PIC_I2C1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { + { + .base = PNX833X_I2C0_PORTS_START, + .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ + .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ + .bus_addr = 0, /* no slave support */ + }, + { + .base = PNX833X_I2C1_PORTS_START, + .irq = -1, /* on high freq, polling is faster */ + /*.irq = PNX833X_PIC_I2C1_INT,*/ + .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ + .bus_addr = 0, /* no slave support */ + }, +}; + +static struct platform_device pnx833x_i2c0_device = { + .name = "i2c-pnx0105", + .id = 0, + .dev = { + .platform_data = &pnx833x_i2c_dev[0], + }, + .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), + .resource = pnx833x_i2c0_resources, +}; + +static struct platform_device pnx833x_i2c1_device = { + .name = "i2c-pnx0105", + .id = 1, + .dev = { + .platform_data = &pnx833x_i2c_dev[1], + }, + .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), + .resource = pnx833x_i2c1_resources, +}; +#endif + +static u64 ethernet_dmamask = DMA_32BIT_MASK; + +static struct resource pnx833x_ethernet_resources[] = { + [0] = { + .start = PNX8335_IP3902_PORTS_START, + .end = PNX8335_IP3902_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8335_PIC_ETHERNET_INT, + .end = PNX8335_PIC_ETHERNET_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_ethernet_device = { + .name = "ip3902-eth", + .id = -1, + .dev = { + .dma_mask = ðernet_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), + .resource = pnx833x_ethernet_resources, +}; + +static struct resource pnx833x_sata_resources[] = { + [0] = { + .start = PNX8335_SATA_PORTS_START, + .end = PNX8335_SATA_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8335_PIC_SATA_INT, + .end = PNX8335_PIC_SATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_sata_device = { + .name = "pnx833x-sata", + .id = -1, + .num_resources = ARRAY_SIZE(pnx833x_sata_resources), + .resource = pnx833x_sata_resources, +}; + +static const char *part_probes[] = { + "cmdlinepart", + NULL +}; + +static void +pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK)); + else + writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK)); +} + +static struct platform_nand_data pnx833x_flash_nand_data = { + .chip = { + .chip_delay = 25, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl + } +}; + +/* + * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!), + * 12 bytes more seems to be the standard that allows for NAND access. + */ +static struct resource pnx833x_flash_nand_resource = { + .start = PNX8335_NAND_BASE, + .end = PNX8335_NAND_BASE + 12, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pnx833x_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &pnx833x_flash_nand_resource, + .dev = { + .platform_data = &pnx833x_flash_nand_data, + }, +}; + +static struct platform_device *pnx833x_platform_devices[] __initdata = { + &pnx833x_uart_device, + &pnx833x_usb_ehci_device, +#ifdef CONFIG_I2C_PNX0105 + &pnx833x_i2c0_device, + &pnx833x_i2c1_device, +#endif + &pnx833x_ethernet_device, + &pnx833x_sata_device, + &pnx833x_flash_nand, +}; + +static int __init pnx833x_platform_init(void) +{ + int res; + + res = platform_add_devices(pnx833x_platform_devices, + ARRAY_SIZE(pnx833x_platform_devices)); + + return res; +} + +arch_initcall(pnx833x_platform_init); diff --git a/arch/mips/nxp/pnx833x/common/prom.c b/arch/mips/nxp/pnx833x/common/prom.c new file mode 100644 index 00000000000..2a41e8fec21 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/prom.c @@ -0,0 +1,70 @@ +/* + * prom.c: + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <asm/bootinfo.h> +#include <linux/string.h> + +void __init prom_init_cmdline(void) +{ + int argc = fw_arg0; + char **argv = (char **)fw_arg1; + char *c = &(arcs_cmdline[0]); + int i; + + for (i = 1; i < argc; i++) { + strcpy(c, argv[i]); + c += strlen(argv[i]); + if (i < argc-1) + *c++ = ' '; + } + *c = 0; +} + +char __init *prom_getenv(char *envname) +{ + extern char **prom_envp; + char **env = prom_envp; + int i; + + i = strlen(envname); + + while (*env) { + if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=') + return *env + i + 1; + env++; + } + + return 0; +} + +void __init prom_free_prom_memory(void) +{ +} + +char * __init prom_getcmdline(void) +{ + return arcs_cmdline; +} + diff --git a/arch/mips/nxp/pnx833x/common/reset.c b/arch/mips/nxp/pnx833x/common/reset.c new file mode 100644 index 00000000000..a9bc9bacad2 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/reset.c @@ -0,0 +1,45 @@ +/* + * reset.c: reset support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/slab.h> +#include <linux/reboot.h> +#include <pnx833x.h> + +void pnx833x_machine_restart(char *command) +{ + PNX833X_RESET_CONTROL_2 = 0; + PNX833X_RESET_CONTROL = 0; +} + +void pnx833x_machine_halt(void) +{ + while (1) + __asm__ __volatile__ ("wait"); + +} + +void pnx833x_machine_power_off(void) +{ + pnx833x_machine_halt(); +} diff --git a/arch/mips/nxp/pnx833x/common/setup.c b/arch/mips/nxp/pnx833x/common/setup.c new file mode 100644 index 00000000000..e51fbc4b644 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/setup.c @@ -0,0 +1,64 @@ +/* + * setup.c: Setup PNX833X Soc. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/pci.h> +#include <asm/reboot.h> +#include <pnx833x.h> +#include <gpio.h> + +extern void pnx833x_board_setup(void); +extern void pnx833x_machine_restart(char *); +extern void pnx833x_machine_halt(void); +extern void pnx833x_machine_power_off(void); + +int __init plat_mem_setup(void) +{ + /* fake pci bus to avoid bounce buffers */ + PCI_DMA_BUS_IS_PHYS = 1; + + /* set mips clock to 320MHz */ +#if defined(CONFIG_SOC_PNX8335) + PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ); +#endif + pnx833x_gpio_init(); /* so it will be ready in board_setup() */ + + pnx833x_board_setup(); + + _machine_restart = pnx833x_machine_restart; + _machine_halt = pnx833x_machine_halt; + pm_power_off = pnx833x_machine_power_off; + + /* IO/MEM resources. */ + set_io_port_base(KSEG1); + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + return 0; +} diff --git a/arch/mips/nxp/pnx833x/stb22x/Makefile b/arch/mips/nxp/pnx833x/stb22x/Makefile new file mode 100644 index 00000000000..f81c5801f45 --- /dev/null +++ b/arch/mips/nxp/pnx833x/stb22x/Makefile @@ -0,0 +1,3 @@ +lib-y := board.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/nxp/pnx833x/stb22x/board.c new file mode 100644 index 00000000000..90cc604bdad --- /dev/null +++ b/arch/mips/nxp/pnx833x/stb22x/board.c @@ -0,0 +1,133 @@ +/* + * board.c: STB225 board support. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <asm/bootinfo.h> +#include <linux/mm.h> +#include <pnx833x.h> +#include <gpio.h> + +/* endianess twiddlers */ +#define PNX8335_DEBUG0 0x4400 +#define PNX8335_DEBUG1 0x4404 +#define PNX8335_DEBUG2 0x4408 +#define PNX8335_DEBUG3 0x440c +#define PNX8335_DEBUG4 0x4410 +#define PNX8335_DEBUG5 0x4414 +#define PNX8335_DEBUG6 0x4418 +#define PNX8335_DEBUG7 0x441c + +int prom_argc; +char **prom_argv = 0, **prom_envp = 0; + +extern void prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP STB22x"; +} + +static inline unsigned long env_or_default(char *env, unsigned long dfl) +{ + char *str = prom_getenv(env); + return str ? simple_strtol(str, 0, 0) : dfl; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize = env_or_default("memsize", 0x02000000); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void __init pnx833x_board_setup(void) +{ + pnx833x_gpio_select_function_alt(4); + pnx833x_gpio_select_output(4); + pnx833x_gpio_select_function_alt(5); + pnx833x_gpio_select_input(5); + pnx833x_gpio_select_function_alt(6); + pnx833x_gpio_select_input(6); + pnx833x_gpio_select_function_alt(7); + pnx833x_gpio_select_output(7); + + pnx833x_gpio_select_function_alt(25); + pnx833x_gpio_select_function_alt(26); + + pnx833x_gpio_select_function_alt(27); + pnx833x_gpio_select_function_alt(28); + pnx833x_gpio_select_function_alt(29); + pnx833x_gpio_select_function_alt(30); + pnx833x_gpio_select_function_alt(31); + pnx833x_gpio_select_function_alt(32); + pnx833x_gpio_select_function_alt(33); + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + /* Setup MIU for NAND access on CS0... + * + * (it seems that we must also configure CS1 for reliable operation, + * otherwise the first read ID command will fail if it's read as 4 bytes + * but pass if it's read as 1 word.) + */ + + /* Setup MIU CS0 & CS1 timing */ + PNX833X_MIU_SEL0 = 0; + PNX833X_MIU_SEL1 = 0; + PNX833X_MIU_SEL0_TIMING = 0x50003081; + PNX833X_MIU_SEL1_TIMING = 0x50003081; + + /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ + pnx833x_gpio_select_function_alt(0); + + /* Setup GPIO 04 to input NAND read/busy signal */ + pnx833x_gpio_select_function_io(4); + pnx833x_gpio_select_input(4); + + /* Setup GPIO 05 to disable NAND write protect */ + pnx833x_gpio_select_function_io(5); + pnx833x_gpio_select_output(5); + pnx833x_gpio_write(1, 5); + +#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE) + + /* Set up MIU for 16-bit NOR access on CS0 and CS1... */ + + /* Setup MIU CS0 & CS1 timing */ + PNX833X_MIU_SEL0 = 1; + PNX833X_MIU_SEL1 = 1; + PNX833X_MIU_SEL0_TIMING = 0x6A08D082; + PNX833X_MIU_SEL1_TIMING = 0x6A08D082; + + /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ + pnx833x_gpio_select_function_alt(0); +#endif +} diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index dd2fbd6645c..3bf3354547f 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -32,7 +32,7 @@ static int op_mips_setup(void) return 0; } -static int op_mips_create_files(struct super_block * sb, struct dentry * root) +static int op_mips_create_files(struct super_block *sb, struct dentry *root) { int i; diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h index 2bfc17c3010..f04b54fb37d 100644 --- a/arch/mips/oprofile/op_impl.h +++ b/arch/mips/oprofile/op_impl.h @@ -27,7 +27,7 @@ struct op_counter_config { /* Per-architecture configury and hooks. */ struct op_mips_model { void (*reg_setup) (struct op_counter_config *); - void (*cpu_setup) (void * dummy); + void (*cpu_setup) (void *dummy); int (*init)(void); void (*exit)(void); void (*cpu_start)(void *args); diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c index a45d3202894..3aa81384966 100644 --- a/arch/mips/oprofile/op_model_rm9000.c +++ b/arch/mips/oprofile/op_model_rm9000.c @@ -80,7 +80,7 @@ static void rm9000_cpu_stop(void *args) write_c0_perfcontrol(0); } -static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id) +static irqreturn_t rm9000_perfcount_handler(int irq, void *dev_id) { unsigned int control = read_c0_perfcontrol(); struct pt_regs *regs = get_irq_regs(); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index b1886244ced..e8a97f59e06 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o +obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c index 846eae9cdd0..fba5aad00d5 100644 --- a/arch/mips/pci/fixup-emma2rh.c +++ b/arch/mips/pci/fixup-emma2rh.c @@ -30,7 +30,7 @@ #include <asm/bootinfo.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define EMMA2RH_PCI_HOST_SLOT 0x09 #define EMMA2RH_USB_SLOT 0x03 diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c index 75b90dcb7a0..3d86823d03a 100644 --- a/arch/mips/pci/fixup-rc32434.c +++ b/arch/mips/pci/fixup-rc32434.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <asm/mach-rc32434/rc32434.h> +#include <asm/mach-rc32434/irq.h> static int __devinitdata irq_map[2][12] = { {0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1}, diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c index d31bfc6d415..5947a70b0b7 100644 --- a/arch/mips/pci/ops-emma2rh.c +++ b/arch/mips/pci/ops-emma2rh.c @@ -30,7 +30,7 @@ #include <asm/addrspace.h> #include <asm/debug.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define RTABORT (0x1<<9) #define RMABORT (0x1<<10) diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c index 772e283daa6..2df4190232c 100644 --- a/arch/mips/pci/pci-emma2rh.c +++ b/arch/mips/pci/pci-emma2rh.c @@ -30,7 +30,7 @@ #include <asm/bootinfo.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> static struct resource pci_io_resource = { .name = "pci IO space", diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index 6537d90a25b..2d3c0dca275 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -79,14 +79,14 @@ unsigned long read_persistent_clock(void) /* Stop the update to the time */ m48t37_base->control = 0x40; - year = BCD2BIN(m48t37_base->year); - year += BCD2BIN(m48t37_base->century) * 100; + year = bcd2bin(m48t37_base->year); + year += bcd2bin(m48t37_base->century) * 100; - month = BCD2BIN(m48t37_base->month); - day = BCD2BIN(m48t37_base->date); - hour = BCD2BIN(m48t37_base->hour); - min = BCD2BIN(m48t37_base->min); - sec = BCD2BIN(m48t37_base->sec); + month = bcd2bin(m48t37_base->month); + day = bcd2bin(m48t37_base->date); + hour = bcd2bin(m48t37_base->hour); + min = bcd2bin(m48t37_base->min); + sec = bcd2bin(m48t37_base->sec); /* Start the update to the time again */ m48t37_base->control = 0x00; @@ -113,22 +113,22 @@ int rtc_mips_set_time(unsigned long tim) m48t37_base->control = 0x80; /* year */ - m48t37_base->year = BIN2BCD(tm.tm_year % 100); - m48t37_base->century = BIN2BCD(tm.tm_year / 100); + m48t37_base->year = bin2bcd(tm.tm_year % 100); + m48t37_base->century = bin2bcd(tm.tm_year / 100); /* month */ - m48t37_base->month = BIN2BCD(tm.tm_mon); + m48t37_base->month = bin2bcd(tm.tm_mon); /* day */ - m48t37_base->date = BIN2BCD(tm.tm_mday); + m48t37_base->date = bin2bcd(tm.tm_mday); /* hour/min/sec */ - m48t37_base->hour = BIN2BCD(tm.tm_hour); - m48t37_base->min = BIN2BCD(tm.tm_min); - m48t37_base->sec = BIN2BCD(tm.tm_sec); + m48t37_base->hour = bin2bcd(tm.tm_hour); + m48t37_base->min = bin2bcd(tm.tm_min); + m48t37_base->sec = bin2bcd(tm.tm_sec); /* day of week -- not really used, but let's keep it up-to-date */ - m48t37_base->day = BIN2BCD(tm.tm_wday + 1); + m48t37_base->day = bin2bcd(tm.tm_wday + 1); /* disable writing */ m48t37_base->control = 0x00; diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 31619c601b1..2f22d714d5b 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -280,7 +280,7 @@ static int __init plat_setup_devices(void) { /* Look for the CF card reader */ if (!readl(IDT434_REG_BASE + DEV1MASK)) - rb532_devs[1] = NULL; + rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */ else { cf_slot0_res[0].start = readl(IDT434_REG_BASE + DEV1BASE); diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 76a7fd96d56..70c4a672637 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -310,6 +310,10 @@ int __init rb532_gpio_init(void) return -ENXIO; } + /* Set the interrupt status and level for the CF pin */ + rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1); + rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0); + return 0; } arch_initcall(rb532_gpio_init); diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index f6d9bf4b26e..f8b18af141a 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -12,20 +12,11 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> #include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> #include <asm/irq_cpu.h> -#include <asm/sgi/ioc.h> #include <asm/sgi/hpc3.h> #include <asm/sgi/ip22.h> -#include <asm/time.h> - -/* #define DEBUG_SGINT */ /* So far nothing hangs here */ #undef USE_LIO3_IRQ @@ -68,7 +59,7 @@ static void enable_local1_irq(unsigned int irq) sgint->imask1 |= (1 << (irq - SGINT_LOCAL1)); } -void disable_local1_irq(unsigned int irq) +static void disable_local1_irq(unsigned int irq) { sgint->imask1 &= ~(1 << (irq - SGINT_LOCAL1)); } @@ -87,7 +78,7 @@ static void enable_local2_irq(unsigned int irq) sgint->cmeimask0 |= (1 << (irq - SGINT_LOCAL2)); } -void disable_local2_irq(unsigned int irq) +static void disable_local2_irq(unsigned int irq) { sgint->cmeimask0 &= ~(1 << (irq - SGINT_LOCAL2)); if (!sgint->cmeimask0) @@ -108,7 +99,7 @@ static void enable_local3_irq(unsigned int irq) sgint->cmeimask1 |= (1 << (irq - SGINT_LOCAL3)); } -void disable_local3_irq(unsigned int irq) +static void disable_local3_irq(unsigned int irq) { sgint->cmeimask1 &= ~(1 << (irq - SGINT_LOCAL3)); if (!sgint->cmeimask1) @@ -344,6 +335,6 @@ void __init arch_init_irq(void) #ifdef CONFIG_EISA if (ip22_is_fullhouse()) /* Only Indigo-2 has EISA stuff */ - ip22_eisa_init(); + ip22_eisa_init(); #endif } diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index 26fbff4c15b..b732600b47f 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -156,32 +156,32 @@ int m41t81_set_time(unsigned long t) */ spin_lock_irqsave(&rtc_lock, flags); - tm.tm_sec = BIN2BCD(tm.tm_sec); + tm.tm_sec = bin2bcd(tm.tm_sec); m41t81_write(M41T81REG_SC, tm.tm_sec); - tm.tm_min = BIN2BCD(tm.tm_min); + tm.tm_min = bin2bcd(tm.tm_min); m41t81_write(M41T81REG_MN, tm.tm_min); - tm.tm_hour = BIN2BCD(tm.tm_hour); + tm.tm_hour = bin2bcd(tm.tm_hour); tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0); m41t81_write(M41T81REG_HR, tm.tm_hour); /* tm_wday starts from 0 to 6 */ if (tm.tm_wday == 0) tm.tm_wday = 7; - tm.tm_wday = BIN2BCD(tm.tm_wday); + tm.tm_wday = bin2bcd(tm.tm_wday); m41t81_write(M41T81REG_DY, tm.tm_wday); - tm.tm_mday = BIN2BCD(tm.tm_mday); + tm.tm_mday = bin2bcd(tm.tm_mday); m41t81_write(M41T81REG_DT, tm.tm_mday); /* tm_mon starts from 0, *ick* */ tm.tm_mon ++; - tm.tm_mon = BIN2BCD(tm.tm_mon); + tm.tm_mon = bin2bcd(tm.tm_mon); m41t81_write(M41T81REG_MO, tm.tm_mon); /* we don't do century, everything is beyond 2000 */ tm.tm_year %= 100; - tm.tm_year = BIN2BCD(tm.tm_year); + tm.tm_year = bin2bcd(tm.tm_year); m41t81_write(M41T81REG_YR, tm.tm_year); spin_unlock_irqrestore(&rtc_lock, flags); @@ -209,12 +209,12 @@ unsigned long m41t81_get_time(void) year = m41t81_read(M41T81REG_YR); spin_unlock_irqrestore(&rtc_lock, flags); - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); year += 2000; diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index ff3e5dabb34..4438b2195c4 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -124,18 +124,18 @@ int xicor_set_time(unsigned long t) xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); /* trivial ones */ - tm.tm_sec = BIN2BCD(tm.tm_sec); + tm.tm_sec = bin2bcd(tm.tm_sec); xicor_write(X1241REG_SC, tm.tm_sec); - tm.tm_min = BIN2BCD(tm.tm_min); + tm.tm_min = bin2bcd(tm.tm_min); xicor_write(X1241REG_MN, tm.tm_min); - tm.tm_mday = BIN2BCD(tm.tm_mday); + tm.tm_mday = bin2bcd(tm.tm_mday); xicor_write(X1241REG_DT, tm.tm_mday); /* tm_mon starts from 0, *ick* */ tm.tm_mon ++; - tm.tm_mon = BIN2BCD(tm.tm_mon); + tm.tm_mon = bin2bcd(tm.tm_mon); xicor_write(X1241REG_MO, tm.tm_mon); /* year is split */ @@ -148,7 +148,7 @@ int xicor_set_time(unsigned long t) tmp = xicor_read(X1241REG_HR); if (tmp & X1241REG_HR_MIL) { /* 24 hour format */ - tm.tm_hour = BIN2BCD(tm.tm_hour); + tm.tm_hour = bin2bcd(tm.tm_hour); tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f); } else { /* 12 hour format, with 0x2 for pm */ @@ -157,7 +157,7 @@ int xicor_set_time(unsigned long t) tmp |= 0x20; tm.tm_hour -= 12; } - tm.tm_hour = BIN2BCD(tm.tm_hour); + tm.tm_hour = bin2bcd(tm.tm_hour); tmp |= tm.tm_hour; } xicor_write(X1241REG_HR, tmp); @@ -191,13 +191,13 @@ unsigned long xicor_get_time(void) y2k = xicor_read(X1241REG_Y2K); spin_unlock_irqrestore(&rtc_lock, flags); - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); - y2k = BCD2BIN(y2k); + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); + y2k = bcd2bin(y2k); year += (y2k * 100); diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 17052db4161..226e8bb2f0a 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -46,9 +46,10 @@ config TOSHIBA_RBTX4938 support this machine type config TOSHIBA_RBTX4939 - bool "Toshiba RBTX4939 bobard" + bool "Toshiba RBTX4939 board" depends on MACH_TX49XX select SOC_TX4939 + select TXX9_7SEGLED help This Toshiba board is based on the TX4939 processor. Say Y here to support this machine type @@ -86,6 +87,9 @@ config SOC_TX4939 select HW_HAS_PCI select PCI_TX4927 +config TXX9_7SEGLED + bool + config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on PCI && MACH_TXX9 diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c new file mode 100644 index 00000000000..727ab21b661 --- /dev/null +++ b/arch/mips/txx9/generic/7segled.c @@ -0,0 +1,112 @@ +/* + * 7 Segment LED routines + * Based on RBTX49xx patch from CELF patch archive. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright TOSHIBA CORPORATION 2005-2007 + * All Rights Reserved. + */ +#include <linux/sysdev.h> +#include <linux/slab.h> +#include <linux/map_to_7segment.h> +#include <asm/txx9/generic.h> + +static unsigned int tx_7segled_num; +static void (*tx_7segled_putc)(unsigned int pos, unsigned char val); + +void __init txx9_7segled_init(unsigned int num, + void (*putc)(unsigned int pos, unsigned char val)) +{ + tx_7segled_num = num; + tx_7segled_putc = putc; +} + +static SEG7_CONVERSION_MAP(txx9_seg7map, MAP_ASCII7SEG_ALPHANUM_LC); + +int txx9_7segled_putc(unsigned int pos, char c) +{ + if (pos >= tx_7segled_num) + return -EINVAL; + c = map_to_seg7(&txx9_seg7map, c); + if (c < 0) + return c; + tx_7segled_putc(pos, c); + return 0; +} + +static ssize_t ascii_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t size) +{ + unsigned int ch = dev->id; + txx9_7segled_putc(ch, buf[0]); + return size; +} + +static ssize_t raw_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t size) +{ + unsigned int ch = dev->id; + tx_7segled_putc(ch, buf[0]); + return size; +} + +static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store); +static SYSDEV_ATTR(raw, 0200, NULL, raw_store); + +static ssize_t map_seg7_show(struct sysdev_class *class, char *buf) +{ + memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map)); + return sizeof(txx9_seg7map); +} + +static ssize_t map_seg7_store(struct sysdev_class *class, + const char *buf, size_t size) +{ + if (size != sizeof(txx9_seg7map)) + return -EINVAL; + memcpy(&txx9_seg7map, buf, size); + return size; +} + +static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store); + +static struct sysdev_class tx_7segled_sysdev_class = { + .name = "7segled", +}; + +static int __init tx_7segled_init_sysfs(void) +{ + int error, i; + if (!tx_7segled_num) + return -ENODEV; + error = sysdev_class_register(&tx_7segled_sysdev_class); + if (error) + return error; + error = sysdev_class_create_file(&tx_7segled_sysdev_class, + &attr_map_seg7); + if (error) + return error; + for (i = 0; i < tx_7segled_num; i++) { + struct sys_device *dev; + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + error = -ENODEV; + break; + } + dev->id = i; + dev->cls = &tx_7segled_sysdev_class; + error = sysdev_register(dev); + if (!error) { + sysdev_create_file(dev, &attr_ascii); + sysdev_create_file(dev, &attr_raw); + } + } + return error; +} + +device_initcall(tx_7segled_init_sysfs); diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 0030d23bef5..f2579ce054a 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -10,5 +10,6 @@ obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_SPI) += spi_eeprom.o +obj-$(CONFIG_TXX9_7SEGLED) += 7segled.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5526375010f..a13a08b8c9e 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -156,11 +156,23 @@ static struct txx9_board_vec *__init find_board_byname(const char *name) static void __init prom_init_cmdline(void) { - int argc = (int)fw_arg0; - int *argv32 = (int *)fw_arg1; + int argc; + int *argv32; int i; /* Always ignore the "-c" at argv[0] */ char builtin[CL_SIZE]; + if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { + /* + * argc is not a valid number, or argv32 is not a valid + * pointer + */ + argc = 0; + argv32 = NULL; + } else { + argc = (int)fw_arg0; + argv32 = (int *)fw_arg1; + } + /* ignore all built-in args if any f/w args given */ /* * But if built-in strings was started with '+', append them @@ -414,10 +426,12 @@ char * __init prom_getcmdline(void) const char *__init prom_getenv(const char *name) { - const s32 *str = (const s32 *)fw_arg2; + const s32 *str; - if (!str) + if (fw_arg2 < CKSEG0) return NULL; + + str = (const s32 *)fw_arg2; /* YAMON style ("name", "value" pairs) */ while (str[0] && str[1]) { if (!strcmp((const char *)(unsigned long)str[0], name)) @@ -622,6 +636,21 @@ unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; EXPORT_SYMBOL(__swizzle_addr_b); #endif +#ifdef NEEDS_TXX9_IOSWABW +static u16 ioswabw_default(volatile u16 *a, u16 x) +{ + return le16_to_cpu(x); +} +static u16 __mem_ioswabw_default(volatile u16 *a, u16 x) +{ + return x; +} +u16 (*ioswabw)(volatile u16 *a, u16 x) = ioswabw_default; +EXPORT_SYMBOL(ioswabw); +u16 (*__mem_ioswabw)(volatile u16 *a, u16 x) = __mem_ioswabw_default; +EXPORT_SYMBOL(__mem_ioswabw); +#endif + void __init txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, const struct physmap_flash_data *pdata) diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index af724e53ef9..25819ff1c35 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -16,6 +16,7 @@ #include <linux/param.h> #include <linux/ptrace.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> #include <asm/reboot.h> #include <asm/traps.h> #include <asm/txx9irq.h> @@ -335,6 +336,52 @@ void __init tx4938_mtd_init(int ch) txx9_physmap_flash_init(ch, start, size, &pdata); } +void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune) +{ + struct platform_device *pdev; + struct resource res[] = { + { + /* .start and .end are filled in later */ + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + struct tx4938ide_platform_info pdata = { + .ioport_shift = shift, + /* + * The IDE driver should not change bus timings if other ISA + * devices existed. + */ + .gbus_clock = tune ? txx9_gbus_clock : 0, + }; + u64 ebccr; + int i; + + if ((__raw_readq(&tx4938_ccfgptr->pcfg) & + (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) + != TX4938_PCFG_ATA_SEL) + return; + for (i = 0; i < 8; i++) { + /* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */ + ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]); + if ((ebccr & 0x00f00008) == 0x00e00008) + break; + } + if (i == 8) + return; + pdata.ebus_ch = i; + res[0].start = ((ebccr >> 48) << 20) + 0x10000; + res[0].end = res[0].start + 0x20000 - 1; + pdev = platform_device_alloc("tx4938ide", -1); + if (!pdev || + platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) || + platform_device_add_data(pdev, &pdata, sizeof(pdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); +} + static void __init tx4938_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 4a74423b2ba..01129a9d50f 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -49,6 +49,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <asm/io.h> #include <asm/reboot.h> #include <asm/txx9/generic.h> @@ -210,10 +211,6 @@ static void __init rbtx4927_mem_setup(void) /* TX4927-SIO DTR on (PIO[15]) */ gpio_request(15, "sio-dtr"); gpio_direction_output(15, 1); - gpio_request(0, "led"); - gpio_direction_output(0, 1); - gpio_request(1, "led"); - gpio_direction_output(1, 1); tx4927_sio_init(0, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE @@ -315,6 +312,25 @@ static void __init rbtx4927_mtd_init(void) tx4927_mtd_init(i); } +static void __init rbtx4927_gpioled_init(void) +{ + static struct gpio_led leds[] = { + { .name = "gpioled:green:0", .gpio = 0, .active_low = 1, }, + { .name = "gpioled:green:1", .gpio = 1, .active_low = 1, }, + }; + static struct gpio_led_platform_data pdata = { + .num_leds = ARRAY_SIZE(leds), + .leds = leds, + }; + struct platform_device *pdev = platform_device_alloc("leds-gpio", 0); + + if (!pdev) + return; + pdev->dev.platform_data = &pdata; + if (platform_device_add(pdev)) + platform_device_put(pdev); +} + static void __init rbtx4927_device_init(void) { toshiba_rbtx4927_rtc_init(); @@ -322,6 +338,7 @@ static void __init rbtx4927_device_init(void) tx4927_wdt_init(); rbtx4927_mtd_init(); txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); + rbtx4927_gpioled_init(); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index e077cc4d3a5..547ff2920bf 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -352,6 +352,7 @@ static void __init rbtx4938_device_init(void) rbtx4938_ne_init(); tx4938_wdt_init(); rbtx4938_mtd_init(); + tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1); txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 9855d7bccc2..98fbd9391bf 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -14,6 +14,8 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/interrupt.h> +#include <linux/smc91x.h> #include <asm/reboot.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> @@ -33,6 +35,21 @@ static void __init rbtx4939_time_init(void) tx4939_time_init(0); } +#if defined(__BIG_ENDIAN) && \ + (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) +#define HAVE_RBTX4939_IOSWAB +#define IS_CE1_ADDR(addr) \ + ((((unsigned long)(addr) - IO_BASE) & 0xfff00000) == TXX9_CE(1)) +static u16 rbtx4939_ioswabw(volatile u16 *a, u16 x) +{ + return IS_CE1_ADDR(a) ? x : le16_to_cpu(x); +} +static u16 rbtx4939_mem_ioswabw(volatile u16 *a, u16 x) +{ + return !IS_CE1_ADDR(a) ? x : le16_to_cpu(x); +} +#endif /* __BIG_ENDIAN && CONFIG_SMC91X */ + static void __init rbtx4939_pci_setup(void) { #ifdef CONFIG_PCI @@ -239,6 +256,32 @@ static inline void rbtx4939_led_setup(void) } #endif +static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val) +{ +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) + unsigned long flags; + local_irq_save(flags); + /* bit7: reserved for LED class */ + led_val[pos] = (led_val[pos] & 0x80) | (val & 0x7f); + val = led_val[pos]; + local_irq_restore(flags); +#endif + writeb(val, rbtx4939_7seg_addr(pos / 4, pos % 4)); +} + +static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val) +{ + /* convert from map_to_seg7() notation */ + val = (val & 0x88) | + ((val & 0x40) >> 6) | + ((val & 0x20) >> 4) | + ((val & 0x10) >> 2) | + ((val & 0x04) << 2) | + ((val & 0x02) << 4) | + ((val & 0x01) << 6); + __rbtx4939_7segled_putc(pos, val); +} + static void __init rbtx4939_arch_init(void) { rbtx4939_pci_setup(); @@ -246,22 +289,50 @@ static void __init rbtx4939_arch_init(void) static void __init rbtx4939_device_init(void) { + unsigned long smc_addr = RBTX4939_ETHER_ADDR - IO_BASE; + struct resource smc_res[] = { + { + .start = smc_addr, + .end = smc_addr + 0x10 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RBTX4939_IRQ_ETHER, + /* override default irq flag defined in smc91x.h */ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, + }; + struct smc91x_platdata smc_pdata = { + .flags = SMC91X_USE_16BIT, + }; + struct platform_device *pdev; #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) int i, j; unsigned char ethaddr[2][6]; + u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f; + for (i = 0; i < 2; i++) { unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10); - if (readb(rbtx4939_bdipsw_addr) & 8) { + if (bdipsw == 0) + memcpy(ethaddr[i], (void *)area, 6); + else { u16 buf[3]; - area -= 0x03000000; + if (bdipsw & 8) + area -= 0x03000000; + else + area -= 0x01000000; for (j = 0; j < 3; j++) buf[j] = le16_to_cpup((u16 *)(area + j * 2)); memcpy(ethaddr[i], buf, 6); - } else - memcpy(ethaddr[i], (void *)area, 6); + } } tx4939_ethaddr_init(ethaddr[0], ethaddr[1]); #endif + pdev = platform_device_alloc("smc91x", -1); + if (!pdev || + platform_device_add_resources(pdev, smc_res, ARRAY_SIZE(smc_res)) || + platform_device_add_data(pdev, &smc_pdata, sizeof(smc_pdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); @@ -269,6 +340,8 @@ static void __init rbtx4939_device_init(void) static void __init rbtx4939_setup(void) { + int i; + rbtx4939_ebusc_setup(); /* always enable ATA0 */ txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE); @@ -276,9 +349,16 @@ static void __init rbtx4939_setup(void) if (txx9_master_clock == 0) txx9_master_clock = 20000000; tx4939_setup(); +#ifdef HAVE_RBTX4939_IOSWAB + ioswabw = rbtx4939_ioswabw; + __mem_ioswabw = rbtx4939_mem_ioswabw; +#endif _machine_restart = rbtx4939_machine_restart; + txx9_7segled_init(RBTX4939_MAX_7SEGLEDS, rbtx4939_7segled_putc); + for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) + txx9_7segled_putc(i, '-'); pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr), readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr)); |