aboutsummaryrefslogtreecommitdiff
path: root/arch/parisc/kernel/firmware.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/parisc/kernel/firmware.c')
-rw-r--r--arch/parisc/kernel/firmware.c1405
1 files changed, 1405 insertions, 0 deletions
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
new file mode 100644
index 00000000000..f244fb200db
--- /dev/null
+++ b/arch/parisc/kernel/firmware.c
@@ -0,0 +1,1405 @@
+/*
+ * arch/parisc/kernel/firmware.c - safe PDC access routines
+ *
+ * PDC == Processor Dependent Code
+ *
+ * See http://www.parisc-linux.org/documentation/index.html
+ * for documentation describing the entry points and calling
+ * conventions defined below.
+ *
+ * Copyright 1999 SuSE GmbH Nuernberg (Philipp Rumpf, prumpf@tux.org)
+ * Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy)
+ * Copyright 2003 Grant Grundler <grundler parisc-linux org>
+ * Copyright 2003,2004 Ryan Bradetich <rbrad@parisc-linux.org>
+ * Copyright 2004 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+/* I think it would be in everyone's best interest to follow this
+ * guidelines when writing PDC wrappers:
+ *
+ * - the name of the pdc wrapper should match one of the macros
+ * used for the first two arguments
+ * - don't use caps for random parts of the name
+ * - use the static PDC result buffers and "copyout" to structs
+ * supplied by the caller to encapsulate alignment restrictions
+ * - hold pdc_lock while in PDC or using static result buffers
+ * - use __pa() to convert virtual (kernel) pointers to physical
+ * ones.
+ * - the name of the struct used for pdc return values should equal
+ * one of the macros used for the first two arguments to the
+ * corresponding PDC call
+ * - keep the order of arguments
+ * - don't be smart (setting trailing NUL bytes for strings, return
+ * something useful even if the call failed) unless you are sure
+ * it's not going to affect functionality or performance
+ *
+ * Example:
+ * int pdc_cache_info(struct pdc_cache_info *cache_info )
+ * {
+ * int retval;
+ *
+ * spin_lock_irq(&pdc_lock);
+ * retval = mem_pdc_call(PDC_CACHE,PDC_CACHE_INFO,__pa(cache_info),0);
+ * convert_to_wide(pdc_result);
+ * memcpy(cache_info, pdc_result, sizeof(*cache_info));
+ * spin_unlock_irq(&pdc_lock);
+ *
+ * return retval;
+ * }
+ * prumpf 991016
+ */
+
+#include <stdarg.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+
+#include <asm/page.h>
+#include <asm/pdc.h>
+#include <asm/pdcpat.h>
+#include <asm/system.h>
+#include <asm/processor.h> /* for boot_cpu_data */
+
+static DEFINE_SPINLOCK(pdc_lock);
+static unsigned long pdc_result[32] __attribute__ ((aligned (8)));
+static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
+
+#ifdef __LP64__
+#define WIDE_FIRMWARE 0x1
+#define NARROW_FIRMWARE 0x2
+
+/* Firmware needs to be initially set to narrow to determine the
+ * actual firmware width. */
+int parisc_narrow_firmware = 1;
+#endif
+
+/* on all currently-supported platforms, IODC I/O calls are always
+ * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
+ * This means Cxxx boxes can't run wide kernels right now. -PB
+ *
+ * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
+ * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
+ * run on Cxxx boxes now. -RB
+ *
+ * Note that some PAT boxes may have 64-bit IODC I/O...
+ */
+
+#ifdef __LP64__
+long real64_call(unsigned long function, ...);
+#endif
+long real32_call(unsigned long function, ...);
+
+#ifdef __LP64__
+# define MEM_PDC (unsigned long)(PAGE0->mem_pdc_hi) << 32 | PAGE0->mem_pdc
+# define mem_pdc_call(args...) unlikely(parisc_narrow_firmware) ? real32_call(MEM_PDC, args) : real64_call(MEM_PDC, args)
+#else
+# define MEM_PDC (unsigned long)PAGE0->mem_pdc
+# define mem_pdc_call(args...) real32_call(MEM_PDC, args)
+#endif
+
+
+/**
+ * f_extend - Convert PDC addresses to kernel addresses.
+ * @address: Address returned from PDC.
+ *
+ * This function is used to convert PDC addresses into kernel addresses
+ * when the PDC address size and kernel address size are different.
+ */
+static unsigned long f_extend(unsigned long address)
+{
+#ifdef __LP64__
+ if(unlikely(parisc_narrow_firmware)) {
+ if((address & 0xff000000) == 0xf0000000)
+ return 0xf0f0f0f000000000UL | (u32)address;
+
+ if((address & 0xf0000000) == 0xf0000000)
+ return 0xffffffff00000000UL | (u32)address;
+ }
+#endif
+ return address;
+}
+
+/**
+ * convert_to_wide - Convert the return buffer addresses into kernel addresses.
+ * @address: The return buffer from PDC.
+ *
+ * This function is used to convert the return buffer addresses retrieved from PDC
+ * into kernel addresses when the PDC address size and kernel address size are
+ * different.
+ */
+static void convert_to_wide(unsigned long *addr)
+{
+#ifdef __LP64__
+ int i;
+ unsigned int *p = (unsigned int *)addr;
+
+ if(unlikely(parisc_narrow_firmware)) {
+ for(i = 31; i >= 0; --i)
+ addr[i] = p[i];
+ }
+#endif
+}
+
+/**
+ * set_firmware_width - Determine if the firmware is wide or narrow.
+ *
+ * This function must be called before any pdc_* function that uses the convert_to_wide
+ * function.
+ */
+void __init set_firmware_width(void)
+{
+#ifdef __LP64__
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0);
+ convert_to_wide(pdc_result);
+ if(pdc_result[0] != NARROW_FIRMWARE)
+ parisc_narrow_firmware = 0;
+ spin_unlock_irq(&pdc_lock);
+#endif
+}
+
+/**
+ * pdc_emergency_unlock - Unlock the linux pdc lock
+ *
+ * This call unlocks the linux pdc lock in case we need some PDC functions
+ * (like pdc_add_valid) during kernel stack dump.
+ */
+void pdc_emergency_unlock(void)
+{
+ /* Spinlock DEBUG code freaks out if we unconditionally unlock */
+ if (spin_is_locked(&pdc_lock))
+ spin_unlock(&pdc_lock);
+}
+
+
+/**
+ * pdc_add_valid - Verify address can be accessed without causing a HPMC.
+ * @address: Address to be verified.
+ *
+ * This PDC call attempts to read from the specified address and verifies
+ * if the address is valid.
+ *
+ * The return value is PDC_OK (0) in case accessing this address is valid.
+ */
+int pdc_add_valid(unsigned long address)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_ADD_VALID, PDC_ADD_VALID_VERIFY, address);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_add_valid);
+
+/**
+ * pdc_chassis_info - Return chassis information.
+ * @result: The return buffer.
+ * @chassis_info: The memory buffer address.
+ * @len: The size of the memory buffer address.
+ *
+ * An HVERSION dependent call for returning the chassis information.
+ */
+int __init pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ memcpy(&pdc_result, chassis_info, sizeof(*chassis_info));
+ memcpy(&pdc_result2, led_info, len);
+ retval = mem_pdc_call(PDC_CHASSIS, PDC_RETURN_CHASSIS_INFO,
+ __pa(pdc_result), __pa(pdc_result2), len);
+ memcpy(chassis_info, pdc_result, sizeof(*chassis_info));
+ memcpy(led_info, pdc_result2, len);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_chassis_send_log - Sends a PDC PAT CHASSIS log message.
+ * @retval: -1 on error, 0 on success. Other value are PDC errors
+ *
+ * Must be correctly formatted or expect system crash
+ */
+#ifdef __LP64__
+int pdc_pat_chassis_send_log(unsigned long state, unsigned long data)
+{
+ int retval = 0;
+
+ if (!is_pdc_pat())
+ return -1;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_CHASSIS_LOG, PDC_PAT_CHASSIS_WRITE_LOG, __pa(&state), __pa(&data));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+#endif
+
+/**
+ * pdc_chassis_disp - Updates display
+ * @retval: -1 on error, 0 on success
+ *
+ * Works on old PDC only (E class, others?)
+ */
+int pdc_chassis_disp(unsigned long disp)
+{
+ int retval = 0;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_CHASSIS, PDC_CHASSIS_DISP, disp);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_coproc_cfg - To identify coprocessors attached to the processor.
+ * @pdc_coproc_info: Return buffer address.
+ *
+ * This PDC call returns the presence and status of all the coprocessors
+ * attached to the processor.
+ */
+int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_COPROC, PDC_COPROC_CFG, __pa(pdc_result));
+ convert_to_wide(pdc_result);
+ pdc_coproc_info->ccr_functional = pdc_result[0];
+ pdc_coproc_info->ccr_present = pdc_result[1];
+ pdc_coproc_info->revision = pdc_result[17];
+ pdc_coproc_info->model = pdc_result[18];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_iodc_read - Read data from the modules IODC.
+ * @actcnt: The actual number of bytes.
+ * @hpa: The HPA of the module for the iodc read.
+ * @index: The iodc entry point.
+ * @iodc_data: A buffer memory for the iodc options.
+ * @iodc_data_size: Size of the memory buffer.
+ *
+ * This PDC call reads from the IODC of the module specified by the hpa
+ * argument.
+ */
+int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
+ void *iodc_data, unsigned int iodc_data_size)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_IODC, PDC_IODC_READ, __pa(pdc_result), hpa,
+ index, __pa(pdc_result2), iodc_data_size);
+ convert_to_wide(pdc_result);
+ *actcnt = pdc_result[0];
+ memcpy(iodc_data, pdc_result2, iodc_data_size);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_iodc_read);
+
+/**
+ * pdc_system_map_find_mods - Locate unarchitected modules.
+ * @pdc_mod_info: Return buffer address.
+ * @mod_path: pointer to dev path structure.
+ * @mod_index: fixed address module index.
+ *
+ * To locate and identify modules which reside at fixed I/O addresses, which
+ * do not self-identify via architected bus walks.
+ */
+int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
+ struct pdc_module_path *mod_path, long mod_index)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_MODULE, __pa(pdc_result),
+ __pa(pdc_result2), mod_index);
+ convert_to_wide(pdc_result);
+ memcpy(pdc_mod_info, pdc_result, sizeof(*pdc_mod_info));
+ memcpy(mod_path, pdc_result2, sizeof(*mod_path));
+ spin_unlock_irq(&pdc_lock);
+
+ pdc_mod_info->mod_addr = f_extend(pdc_mod_info->mod_addr);
+ return retval;
+}
+
+/**
+ * pdc_system_map_find_addrs - Retrieve additional address ranges.
+ * @pdc_addr_info: Return buffer address.
+ * @mod_index: Fixed address module index.
+ * @addr_index: Address range index.
+ *
+ * Retrieve additional information about subsequent address ranges for modules
+ * with multiple address ranges.
+ */
+int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
+ long mod_index, long addr_index)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_ADDRESS, __pa(pdc_result),
+ mod_index, addr_index);
+ convert_to_wide(pdc_result);
+ memcpy(pdc_addr_info, pdc_result, sizeof(*pdc_addr_info));
+ spin_unlock_irq(&pdc_lock);
+
+ pdc_addr_info->mod_addr = f_extend(pdc_addr_info->mod_addr);
+ return retval;
+}
+
+/**
+ * pdc_model_info - Return model information about the processor.
+ * @model: The return buffer.
+ *
+ * Returns the version numbers, identifiers, and capabilities from the processor module.
+ */
+int pdc_model_info(struct pdc_model *model)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_INFO, __pa(pdc_result), 0);
+ convert_to_wide(pdc_result);
+ memcpy(model, pdc_result, sizeof(*model));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_model_sysmodel - Get the system model name.
+ * @name: A char array of at least 81 characters.
+ *
+ * Get system model name from PDC ROM (e.g. 9000/715 or 9000/778/B160L)
+ */
+int pdc_model_sysmodel(char *name)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_SYSMODEL, __pa(pdc_result),
+ OS_ID_HPUX, __pa(name));
+ convert_to_wide(pdc_result);
+
+ if (retval == PDC_OK) {
+ name[pdc_result[0]] = '\0'; /* add trailing '\0' */
+ } else {
+ name[0] = 0;
+ }
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_model_versions - Identify the version number of each processor.
+ * @cpu_id: The return buffer.
+ * @id: The id of the processor to check.
+ *
+ * Returns the version number for each processor component.
+ *
+ * This comment was here before, but I do not know what it means :( -RB
+ * id: 0 = cpu revision, 1 = boot-rom-version
+ */
+int pdc_model_versions(unsigned long *versions, int id)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_VERSIONS, __pa(pdc_result), id);
+ convert_to_wide(pdc_result);
+ *versions = pdc_result[0];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_model_cpuid - Returns the CPU_ID.
+ * @cpu_id: The return buffer.
+ *
+ * Returns the CPU_ID value which uniquely identifies the cpu portion of
+ * the processor module.
+ */
+int pdc_model_cpuid(unsigned long *cpu_id)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ pdc_result[0] = 0; /* preset zero (call may not be implemented!) */
+ retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CPU_ID, __pa(pdc_result), 0);
+ convert_to_wide(pdc_result);
+ *cpu_id = pdc_result[0];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_model_capabilities - Returns the platform capabilities.
+ * @capabilities: The return buffer.
+ *
+ * Returns information about platform support for 32- and/or 64-bit
+ * OSes, IO-PDIR coherency, and virtual aliasing.
+ */
+int pdc_model_capabilities(unsigned long *capabilities)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ pdc_result[0] = 0; /* preset zero (call may not be implemented!) */
+ retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0);
+ convert_to_wide(pdc_result);
+ *capabilities = pdc_result[0];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_cache_info - Return cache and TLB information.
+ * @cache_info: The return buffer.
+ *
+ * Returns information about the processor's cache and TLB.
+ */
+int pdc_cache_info(struct pdc_cache_info *cache_info)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_CACHE, PDC_CACHE_INFO, __pa(pdc_result), 0);
+ convert_to_wide(pdc_result);
+ memcpy(cache_info, pdc_result, sizeof(*cache_info));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+#ifndef CONFIG_PA20
+/**
+ * pdc_btlb_info - Return block TLB information.
+ * @btlb: The return buffer.
+ *
+ * Returns information about the hardware Block TLB.
+ */
+int pdc_btlb_info(struct pdc_btlb_info *btlb)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_BLOCK_TLB, PDC_BTLB_INFO, __pa(pdc_result), 0);
+ memcpy(btlb, pdc_result, sizeof(*btlb));
+ spin_unlock_irq(&pdc_lock);
+
+ if(retval < 0) {
+ btlb->max_size = 0;
+ }
+ return retval;
+}
+
+/**
+ * pdc_mem_map_hpa - Find fixed module information.
+ * @address: The return buffer
+ * @mod_path: pointer to dev path structure.
+ *
+ * This call was developed for S700 workstations to allow the kernel to find
+ * the I/O devices (Core I/O). In the future (Kittyhawk and beyond) this
+ * call will be replaced (on workstations) by the architected PDC_SYSTEM_MAP
+ * call.
+ *
+ * This call is supported by all existing S700 workstations (up to Gecko).
+ */
+int pdc_mem_map_hpa(struct pdc_memory_map *address,
+ struct pdc_module_path *mod_path)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ memcpy(pdc_result2, mod_path, sizeof(*mod_path));
+ retval = mem_pdc_call(PDC_MEM_MAP, PDC_MEM_MAP_HPA, __pa(pdc_result),
+ __pa(pdc_result2));
+ memcpy(address, pdc_result, sizeof(*address));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+#endif /* !CONFIG_PA20 */
+
+/**
+ * pdc_lan_station_id - Get the LAN address.
+ * @lan_addr: The return buffer.
+ * @hpa: The network device HPA.
+ *
+ * Get the LAN station address when it is not directly available from the LAN hardware.
+ */
+int pdc_lan_station_id(char *lan_addr, unsigned long hpa)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_LAN_STATION_ID, PDC_LAN_STATION_ID_READ,
+ __pa(pdc_result), hpa);
+ if (retval < 0) {
+ /* FIXME: else read MAC from NVRAM */
+ memset(lan_addr, 0, PDC_LAN_STATION_ID_SIZE);
+ } else {
+ memcpy(lan_addr, pdc_result, PDC_LAN_STATION_ID_SIZE);
+ }
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_lan_station_id);
+
+/**
+ * pdc_stable_read - Read data from Stable Storage.
+ * @staddr: Stable Storage address to access.
+ * @memaddr: The memory address where Stable Storage data shall be copied.
+ * @count: number of bytes to transfert. count is multiple of 4.
+ *
+ * This PDC call reads from the Stable Storage address supplied in staddr
+ * and copies count bytes to the memory address memaddr.
+ * The call will fail if staddr+count > PDC_STABLE size.
+ */
+int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_READ, staddr,
+ __pa(pdc_result), count);
+ convert_to_wide(pdc_result);
+ memcpy(memaddr, pdc_result, count);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_stable_read);
+
+/**
+ * pdc_stable_write - Write data to Stable Storage.
+ * @staddr: Stable Storage address to access.
+ * @memaddr: The memory address where Stable Storage data shall be read from.
+ * @count: number of bytes to transfert. count is multiple of 4.
+ *
+ * This PDC call reads count bytes from the supplied memaddr address,
+ * and copies count bytes to the Stable Storage address staddr.
+ * The call will fail if staddr+count > PDC_STABLE size.
+ */
+int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ memcpy(pdc_result, memaddr, count);
+ convert_to_wide(pdc_result);
+ retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_WRITE, staddr,
+ __pa(pdc_result), count);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_stable_write);
+
+/**
+ * pdc_stable_get_size - Get Stable Storage size in bytes.
+ * @size: pointer where the size will be stored.
+ *
+ * This PDC call returns the number of bytes in the processor's Stable
+ * Storage, which is the number of contiguous bytes implemented in Stable
+ * Storage starting from staddr=0. size in an unsigned 64-bit integer
+ * which is a multiple of four.
+ */
+int pdc_stable_get_size(unsigned long *size)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_RETURN_SIZE, __pa(pdc_result));
+ *size = pdc_result[0];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_stable_get_size);
+
+/**
+ * pdc_stable_verify_contents - Checks that Stable Storage contents are valid.
+ *
+ * This PDC call is meant to be used to check the integrity of the current
+ * contents of Stable Storage.
+ */
+int pdc_stable_verify_contents(void)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_VERIFY_CONTENTS);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_stable_verify_contents);
+
+/**
+ * pdc_stable_initialize - Sets Stable Storage contents to zero and initialize
+ * the validity indicator.
+ *
+ * This PDC call will erase all contents of Stable Storage. Use with care!
+ */
+int pdc_stable_initialize(void)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_INITIALIZE);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_stable_initialize);
+
+/**
+ * pdc_get_initiator - Get the SCSI Interface Card params (SCSI ID, SDTR, SE or LVD)
+ * @hwpath: fully bc.mod style path to the device.
+ * @initiator: the array to return the result into
+ *
+ * Get the SCSI operational parameters from PDC.
+ * Needed since HPUX never used BIOS or symbios card NVRAM.
+ * Most ncr/sym cards won't have an entry and just use whatever
+ * capabilities of the card are (eg Ultra, LVD). But there are
+ * several cases where it's useful:
+ * o set SCSI id for Multi-initiator clusters,
+ * o cable too long (ie SE scsi 10Mhz won't support 6m length),
+ * o bus width exported is less than what the interface chip supports.
+ */
+int pdc_get_initiator(struct hardware_path *hwpath, struct pdc_initiator *initiator)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+
+/* BCJ-XXXX series boxes. E.G. "9000/785/C3000" */
+#define IS_SPROCKETS() (strlen(boot_cpu_data.pdc.sys_model_name) == 14 && \
+ strncmp(boot_cpu_data.pdc.sys_model_name, "9000/785", 8) == 0)
+
+ retval = mem_pdc_call(PDC_INITIATOR, PDC_GET_INITIATOR,
+ __pa(pdc_result), __pa(hwpath));
+ if (retval < PDC_OK)
+ goto out;
+
+ if (pdc_result[0] < 16) {
+ initiator->host_id = pdc_result[0];
+ } else {
+ initiator->host_id = -1;
+ }
+
+ /*
+ * Sprockets and Piranha return 20 or 40 (MT/s). Prelude returns
+ * 1, 2, 5 or 10 for 5, 10, 20 or 40 MT/s, respectively
+ */
+ switch (pdc_result[1]) {
+ case 1: initiator->factor = 50; break;
+ case 2: initiator->factor = 25; break;
+ case 5: initiator->factor = 12; break;
+ case 25: initiator->factor = 10; break;
+ case 20: initiator->factor = 12; break;
+ case 40: initiator->factor = 10; break;
+ default: initiator->factor = -1; break;
+ }
+
+ if (IS_SPROCKETS()) {
+ initiator->width = pdc_result[4];
+ initiator->mode = pdc_result[5];
+ } else {
+ initiator->width = -1;
+ initiator->mode = -1;
+ }
+
+ out:
+ spin_unlock_irq(&pdc_lock);
+ return (retval >= PDC_OK);
+}
+EXPORT_SYMBOL(pdc_get_initiator);
+
+
+/**
+ * pdc_pci_irt_size - Get the number of entries in the interrupt routing table.
+ * @num_entries: The return value.
+ * @hpa: The HPA for the device.
+ *
+ * This PDC function returns the number of entries in the specified cell's
+ * interrupt table.
+ * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes
+ */
+int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL_SIZE,
+ __pa(pdc_result), hpa);
+ convert_to_wide(pdc_result);
+ *num_entries = pdc_result[0];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pci_irt - Get the PCI interrupt routing table.
+ * @num_entries: The number of entries in the table.
+ * @hpa: The Hard Physical Address of the device.
+ * @tbl:
+ *
+ * Get the PCI interrupt routing table for the device at the given HPA.
+ * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes
+ */
+int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl)
+{
+ int retval;
+
+ BUG_ON((unsigned long)tbl & 0x7);
+
+ spin_lock_irq(&pdc_lock);
+ pdc_result[0] = num_entries;
+ retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL,
+ __pa(pdc_result), hpa, __pa(tbl));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+
+#if 0 /* UNTEST CODE - left here in case someone needs it */
+
+/**
+ * pdc_pci_config_read - read PCI config space.
+ * @hpa token from PDC to indicate which PCI device
+ * @pci_addr configuration space address to read from
+ *
+ * Read PCI Configuration space *before* linux PCI subsystem is running.
+ */
+unsigned int pdc_pci_config_read(void *hpa, unsigned long cfg_addr)
+{
+ int retval;
+ spin_lock_irq(&pdc_lock);
+ pdc_result[0] = 0;
+ pdc_result[1] = 0;
+ retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_READ_CONFIG,
+ __pa(pdc_result), hpa, cfg_addr&~3UL, 4UL);
+ spin_unlock_irq(&pdc_lock);
+ return retval ? ~0 : (unsigned int) pdc_result[0];
+}
+
+
+/**
+ * pdc_pci_config_write - read PCI config space.
+ * @hpa token from PDC to indicate which PCI device
+ * @pci_addr configuration space address to write
+ * @val value we want in the 32-bit register
+ *
+ * Write PCI Configuration space *before* linux PCI subsystem is running.
+ */
+void pdc_pci_config_write(void *hpa, unsigned long cfg_addr, unsigned int val)
+{
+ int retval;
+ spin_lock_irq(&pdc_lock);
+ pdc_result[0] = 0;
+ retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_WRITE_CONFIG,
+ __pa(pdc_result), hpa,
+ cfg_addr&~3UL, 4UL, (unsigned long) val);
+ spin_unlock_irq(&pdc_lock);
+ return retval;
+}
+#endif /* UNTESTED CODE */
+
+/**
+ * pdc_tod_read - Read the Time-Of-Day clock.
+ * @tod: The return buffer:
+ *
+ * Read the Time-Of-Day clock
+ */
+int pdc_tod_read(struct pdc_tod *tod)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_TOD, PDC_TOD_READ, __pa(pdc_result), 0);
+ convert_to_wide(pdc_result);
+ memcpy(tod, pdc_result, sizeof(*tod));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_tod_read);
+
+/**
+ * pdc_tod_set - Set the Time-Of-Day clock.
+ * @sec: The number of seconds since epoch.
+ * @usec: The number of micro seconds.
+ *
+ * Set the Time-Of-Day clock.
+ */
+int pdc_tod_set(unsigned long sec, unsigned long usec)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_TOD, PDC_TOD_WRITE, sec, usec);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_tod_set);
+
+#ifdef __LP64__
+int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
+ struct pdc_memory_table *tbl, unsigned long entries)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_MEM, PDC_MEM_TABLE, __pa(pdc_result), __pa(pdc_result2), entries);
+ convert_to_wide(pdc_result);
+ memcpy(r_addr, pdc_result, sizeof(*r_addr));
+ memcpy(tbl, pdc_result2, entries * sizeof(*tbl));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+#endif /* __LP64__ */
+
+/* FIXME: Is this pdc used? I could not find type reference to ftc_bitmap
+ * so I guessed at unsigned long. Someone who knows what this does, can fix
+ * it later. :)
+ */
+int pdc_do_firm_test_reset(unsigned long ftc_bitmap)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_FIRM_TEST_RESET,
+ PDC_FIRM_TEST_MAGIC, ftc_bitmap);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/*
+ * pdc_do_reset - Reset the system.
+ *
+ * Reset the system.
+ */
+int pdc_do_reset(void)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_RESET);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/*
+ * pdc_soft_power_info - Enable soft power switch.
+ * @power_reg: address of soft power register
+ *
+ * Return the absolute address of the soft power switch register
+ */
+int __init pdc_soft_power_info(unsigned long *power_reg)
+{
+ int retval;
+
+ *power_reg = (unsigned long) (-1);
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_INFO, __pa(pdc_result), 0);
+ if (retval == PDC_OK) {
+ convert_to_wide(pdc_result);
+ *power_reg = f_extend(pdc_result[0]);
+ }
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/*
+ * pdc_soft_power_button - Control the soft power button behaviour
+ * @sw_control: 0 for hardware control, 1 for software control
+ *
+ *
+ * This PDC function places the soft power button under software or
+ * hardware control.
+ * Under software control the OS may control to when to allow to shut
+ * down the system. Under hardware control pressing the power button
+ * powers off the system immediately.
+ */
+int pdc_soft_power_button(int sw_control)
+{
+ int retval;
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_ENABLE, __pa(pdc_result), sw_control);
+ spin_unlock_irq(&pdc_lock);
+ return retval;
+}
+
+/*
+ * pdc_io_reset - Hack to avoid overlapping range registers of Bridges devices.
+ * Primarily a problem on T600 (which parisc-linux doesn't support) but
+ * who knows what other platform firmware might do with this OS "hook".
+ */
+void pdc_io_reset(void)
+{
+ spin_lock_irq(&pdc_lock);
+ mem_pdc_call(PDC_IO, PDC_IO_RESET, 0);
+ spin_unlock_irq(&pdc_lock);
+}
+
+/*
+ * pdc_io_reset_devices - Hack to Stop USB controller
+ *
+ * If PDC used the usb controller, the usb controller
+ * is still running and will crash the machines during iommu
+ * setup, because of still running DMA. This PDC call
+ * stops the USB controller.
+ * Normally called after calling pdc_io_reset().
+ */
+void pdc_io_reset_devices(void)
+{
+ spin_lock_irq(&pdc_lock);
+ mem_pdc_call(PDC_IO, PDC_IO_RESET_DEVICES, 0);
+ spin_unlock_irq(&pdc_lock);
+}
+
+
+/**
+ * pdc_iodc_putc - Console character print using IODC.
+ * @c: the character to output.
+ *
+ * Note that only these special chars are architected for console IODC io:
+ * BEL, BS, CR, and LF. Others are passed through.
+ * Since the HP console requires CR+LF to perform a 'newline', we translate
+ * "\n" to "\r\n".
+ */
+void pdc_iodc_putc(unsigned char c)
+{
+ /* XXX Should we spinlock posx usage */
+ static int posx; /* for simple TAB-Simulation... */
+ static int __attribute__((aligned(8))) iodc_retbuf[32];
+ static char __attribute__((aligned(64))) iodc_dbuf[4096];
+ unsigned int n;
+ unsigned int flags;
+
+ switch (c) {
+ case '\n':
+ iodc_dbuf[0] = '\r';
+ iodc_dbuf[1] = '\n';
+ n = 2;
+ posx = 0;
+ break;
+ case '\t':
+ pdc_iodc_putc(' ');
+ while (posx & 7) /* expand TAB */
+ pdc_iodc_putc(' ');
+ return; /* return since IODC can't handle this */
+ case '\b':
+ posx-=2; /* BS */
+ default:
+ iodc_dbuf[0] = c;
+ n = 1;
+ posx++;
+ break;
+ }
+
+ spin_lock_irqsave(&pdc_lock, flags);
+ real32_call(PAGE0->mem_cons.iodc_io,
+ (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
+ PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
+ __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0);
+ spin_unlock_irqrestore(&pdc_lock, flags);
+}
+
+/**
+ * pdc_iodc_outc - Console character print using IODC (without conversions).
+ * @c: the character to output.
+ *
+ * Write the character directly to the IODC console.
+ */
+void pdc_iodc_outc(unsigned char c)
+{
+ unsigned int n, flags;
+
+ /* fill buffer with one caracter and print it */
+ static int __attribute__((aligned(8))) iodc_retbuf[32];
+ static char __attribute__((aligned(64))) iodc_dbuf[4096];
+
+ n = 1;
+ iodc_dbuf[0] = c;
+
+ spin_lock_irqsave(&pdc_lock, flags);
+ real32_call(PAGE0->mem_cons.iodc_io,
+ (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
+ PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
+ __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0);
+ spin_unlock_irqrestore(&pdc_lock, flags);
+}
+
+/**
+ * pdc_iodc_getc - Read a character (non-blocking) from the PDC console.
+ *
+ * Read a character (non-blocking) from the PDC console, returns -1 if
+ * key is not present.
+ */
+int pdc_iodc_getc(void)
+{
+ unsigned int flags;
+ static int __attribute__((aligned(8))) iodc_retbuf[32];
+ static char __attribute__((aligned(64))) iodc_dbuf[4096];
+ int ch;
+ int status;
+
+ /* Bail if no console input device. */
+ if (!PAGE0->mem_kbd.iodc_io)
+ return 0;
+
+ /* wait for a keyboard (rs232)-input */
+ spin_lock_irqsave(&pdc_lock, flags);
+ real32_call(PAGE0->mem_kbd.iodc_io,
+ (unsigned long)PAGE0->mem_kbd.hpa, ENTRY_IO_CIN,
+ PAGE0->mem_kbd.spa, __pa(PAGE0->mem_kbd.dp.layers),
+ __pa(iodc_retbuf), 0, __pa(iodc_dbuf), 1, 0);
+
+ ch = *iodc_dbuf;
+ status = *iodc_retbuf;
+ spin_unlock_irqrestore(&pdc_lock, flags);
+
+ if (status == 0)
+ return -1;
+
+ return ch;
+}
+
+int pdc_sti_call(unsigned long func, unsigned long flags,
+ unsigned long inptr, unsigned long outputr,
+ unsigned long glob_cfg)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = real32_call(func, flags, inptr, outputr, glob_cfg);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(pdc_sti_call);
+
+#ifdef __LP64__
+/**
+ * pdc_pat_cell_get_number - Returns the cell number.
+ * @cell_info: The return buffer.
+ *
+ * This PDC call returns the cell number of the cell from which the call
+ * is made.
+ */
+int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_GET_NUMBER, __pa(pdc_result));
+ memcpy(cell_info, pdc_result, sizeof(*cell_info));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_cell_module - Retrieve the cell's module information.
+ * @actcnt: The number of bytes written to mem_addr.
+ * @ploc: The physical location.
+ * @mod: The module index.
+ * @view_type: The view of the address type.
+ * @mem_addr: The return buffer.
+ *
+ * This PDC call returns information about each module attached to the cell
+ * at the specified location.
+ */
+int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod,
+ unsigned long view_type, void *mem_addr)
+{
+ int retval;
+ static struct pdc_pat_cell_mod_maddr_block result __attribute__ ((aligned (8)));
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_MODULE, __pa(pdc_result),
+ ploc, mod, view_type, __pa(&result));
+ if(!retval) {
+ *actcnt = pdc_result[0];
+ memcpy(mem_addr, &result, *actcnt);
+ }
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_cpu_get_number - Retrieve the cpu number.
+ * @cpu_info: The return buffer.
+ * @hpa: The Hard Physical Address of the CPU.
+ *
+ * Retrieve the cpu number for the cpu at the specified HPA.
+ */
+int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_CPU, PDC_PAT_CPU_GET_NUMBER,
+ __pa(&pdc_result), hpa);
+ memcpy(cpu_info, pdc_result, sizeof(*cpu_info));
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_get_irt_size - Retrieve the number of entries in the cell's interrupt table.
+ * @num_entries: The return value.
+ * @cell_num: The target cell.
+ *
+ * This PDC function returns the number of entries in the specified cell's
+ * interrupt table.
+ */
+int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE,
+ __pa(pdc_result), cell_num);
+ *num_entries = pdc_result[0];
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_get_irt - Retrieve the cell's interrupt table.
+ * @r_addr: The return buffer.
+ * @cell_num: The target cell.
+ *
+ * This PDC function returns the actual interrupt table for the specified cell.
+ */
+int pdc_pat_get_irt(void *r_addr, unsigned long cell_num)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE,
+ __pa(r_addr), cell_num);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_pd_get_addr_map - Retrieve information about memory address ranges.
+ * @actlen: The return buffer.
+ * @mem_addr: Pointer to the memory buffer.
+ * @count: The number of bytes to read from the buffer.
+ * @offset: The offset with respect to the beginning of the buffer.
+ *
+ */
+int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr,
+ unsigned long count, unsigned long offset)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_PD, PDC_PAT_PD_GET_ADDR_MAP, __pa(pdc_result),
+ __pa(pdc_result2), count, offset);
+ *actual_len = pdc_result[0];
+ memcpy(mem_addr, pdc_result2, *actual_len);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_io_pci_cfg_read - Read PCI configuration space.
+ * @pci_addr: PCI configuration space address for which the read request is being made.
+ * @pci_size: Size of read in bytes. Valid values are 1, 2, and 4.
+ * @mem_addr: Pointer to return memory buffer.
+ *
+ */
+int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *mem_addr)
+{
+ int retval;
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_READ,
+ __pa(pdc_result), pci_addr, pci_size);
+ switch(pci_size) {
+ case 1: *(u8 *) mem_addr = (u8) pdc_result[0];
+ case 2: *(u16 *)mem_addr = (u16) pdc_result[0];
+ case 4: *(u32 *)mem_addr = (u32) pdc_result[0];
+ }
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_io_pci_cfg_write - Retrieve information about memory address ranges.
+ * @pci_addr: PCI configuration space address for which the write request is being made.
+ * @pci_size: Size of write in bytes. Valid values are 1, 2, and 4.
+ * @value: Pointer to 1, 2, or 4 byte value in low order end of argument to be
+ * written to PCI Config space.
+ *
+ */
+int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val)
+{
+ int retval;
+
+ spin_lock_irq(&pdc_lock);
+ retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_WRITE,
+ pci_addr, pci_size, val);
+ spin_unlock_irq(&pdc_lock);
+
+ return retval;
+}
+#endif /* __LP64__ */
+
+
+/***************** 32-bit real-mode calls ***********/
+/* The struct below is used
+ * to overlay real_stack (real2.S), preparing a 32-bit call frame.
+ * real32_call_asm() then uses this stack in narrow real mode
+ */
+
+struct narrow_stack {
+ /* use int, not long which is 64 bits */
+ unsigned int arg13;
+ unsigned int arg12;
+ unsigned int arg11;
+ unsigned int arg10;
+ unsigned int arg9;
+ unsigned int arg8;
+ unsigned int arg7;
+ unsigned int arg6;
+ unsigned int arg5;
+ unsigned int arg4;
+ unsigned int arg3;
+ unsigned int arg2;
+ unsigned int arg1;
+ unsigned int arg0;
+ unsigned int frame_marker[8];
+ unsigned int sp;
+ /* in reality, there's nearly 8k of stack after this */
+};
+
+long real32_call(unsigned long fn, ...)
+{
+ va_list args;
+ extern struct narrow_stack real_stack;
+ extern unsigned long real32_call_asm(unsigned int *,
+ unsigned int *,
+ unsigned int);
+
+ va_start(args, fn);
+ real_stack.arg0 = va_arg(args, unsigned int);
+ real_stack.arg1 = va_arg(args, unsigned int);
+ real_stack.arg2 = va_arg(args, unsigned int);
+ real_stack.arg3 = va_arg(args, unsigned int);
+ real_stack.arg4 = va_arg(args, unsigned int);
+ real_stack.arg5 = va_arg(args, unsigned int);
+ real_stack.arg6 = va_arg(args, unsigned int);
+ real_stack.arg7 = va_arg(args, unsigned int);
+ real_stack.arg8 = va_arg(args, unsigned int);
+ real_stack.arg9 = va_arg(args, unsigned int);
+ real_stack.arg10 = va_arg(args, unsigned int);
+ real_stack.arg11 = va_arg(args, unsigned int);
+ real_stack.arg12 = va_arg(args, unsigned int);
+ real_stack.arg13 = va_arg(args, unsigned int);
+ va_end(args);
+
+ return real32_call_asm(&real_stack.sp, &real_stack.arg0, fn);
+}
+
+#ifdef __LP64__
+/***************** 64-bit real-mode calls ***********/
+
+struct wide_stack {
+ unsigned long arg0;
+ unsigned long arg1;
+ unsigned long arg2;
+ unsigned long arg3;
+ unsigned long arg4;
+ unsigned long arg5;
+ unsigned long arg6;
+ unsigned long arg7;
+ unsigned long arg8;
+ unsigned long arg9;
+ unsigned long arg10;
+ unsigned long arg11;
+ unsigned long arg12;
+ unsigned long arg13;
+ unsigned long frame_marker[2]; /* rp, previous sp */
+ unsigned long sp;
+ /* in reality, there's nearly 8k of stack after this */
+};
+
+long real64_call(unsigned long fn, ...)
+{
+ va_list args;
+ extern struct wide_stack real64_stack;
+ extern unsigned long real64_call_asm(unsigned long *,
+ unsigned long *,
+ unsigned long);
+
+ va_start(args, fn);
+ real64_stack.arg0 = va_arg(args, unsigned long);
+ real64_stack.arg1 = va_arg(args, unsigned long);
+ real64_stack.arg2 = va_arg(args, unsigned long);
+ real64_stack.arg3 = va_arg(args, unsigned long);
+ real64_stack.arg4 = va_arg(args, unsigned long);
+ real64_stack.arg5 = va_arg(args, unsigned long);
+ real64_stack.arg6 = va_arg(args, unsigned long);
+ real64_stack.arg7 = va_arg(args, unsigned long);
+ real64_stack.arg8 = va_arg(args, unsigned long);
+ real64_stack.arg9 = va_arg(args, unsigned long);
+ real64_stack.arg10 = va_arg(args, unsigned long);
+ real64_stack.arg11 = va_arg(args, unsigned long);
+ real64_stack.arg12 = va_arg(args, unsigned long);
+ real64_stack.arg13 = va_arg(args, unsigned long);
+ va_end(args);
+
+ return real64_call_asm(&real64_stack.sp, &real64_stack.arg0, fn);
+}
+
+#endif /* __LP64__ */
+