diff options
Diffstat (limited to 'arch/powerpc/boot')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8568mds.dts | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 00000000000..06d24653e42 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -0,0 +1,380 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8568EMDS"; + compatible = "MPC85xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = <f8000000 8000>; + }; + + soc8568@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 00 00 00 00 00]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 f000>; + interrupts = <1d 2>; + interrupt-parent = <40000>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <000000fe>; + descriptor-types-mask = <012b0ebf>; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + par_io@e0100 { + reg = <e0100 100>; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@01 { + linux,phandle = <e010001>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 4 0a 1 0 2 0 /* TxD0 */ + 4 09 1 0 2 0 /* TxD1 */ + 4 08 1 0 2 0 /* TxD2 */ + 4 07 1 0 2 0 /* TxD3 */ + 4 17 1 0 2 0 /* TxD4 */ + 4 16 1 0 2 0 /* TxD5 */ + 4 15 1 0 2 0 /* TxD6 */ + 4 14 1 0 2 0 /* TxD7 */ + 4 0f 2 0 2 0 /* RxD0 */ + 4 0e 2 0 2 0 /* RxD1 */ + 4 0d 2 0 2 0 /* RxD2 */ + 4 0c 2 0 2 0 /* RxD3 */ + 4 1d 2 0 2 0 /* RxD4 */ + 4 1c 2 0 2 0 /* RxD5 */ + 4 1b 2 0 2 0 /* RxD6 */ + 4 1a 2 0 2 0 /* RxD7 */ + 4 0b 1 0 2 0 /* TX_EN */ + 4 18 1 0 2 0 /* TX_ER */ + 4 0f 2 0 2 0 /* RX_DV */ + 4 1e 2 0 2 0 /* RX_ER */ + 4 11 2 0 2 0 /* RX_CLK */ + 4 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0>; /* GTX125 */ + }; + ucc_pin@02 { + linux,phandle = <e010002>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 5 0a 1 0 2 0 /* TxD0 */ + 5 09 1 0 2 0 /* TxD1 */ + 5 08 1 0 2 0 /* TxD2 */ + 5 07 1 0 2 0 /* TxD3 */ + 5 17 1 0 2 0 /* TxD4 */ + 5 16 1 0 2 0 /* TxD5 */ + 5 15 1 0 2 0 /* TxD6 */ + 5 14 1 0 2 0 /* TxD7 */ + 5 0f 2 0 2 0 /* RxD0 */ + 5 0e 2 0 2 0 /* RxD1 */ + 5 0d 2 0 2 0 /* RxD2 */ + 5 0c 2 0 2 0 /* RxD3 */ + 5 1d 2 0 2 0 /* RxD4 */ + 5 1c 2 0 2 0 /* RxD5 */ + 5 1b 2 0 2 0 /* RxD6 */ + 5 1a 2 0 2 0 /* RxD7 */ + 5 0b 1 0 2 0 /* TX_EN */ + 5 18 1 0 2 0 /* TX_ER */ + 5 10 2 0 2 0 /* RX_DV */ + 5 1e 2 0 2 0 /* RX_ER */ + 5 11 2 0 2 0 /* RX_CLK */ + 5 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0 /* GTX125 */ + 4 06 3 0 2 0 /* MDIO */ + 4 05 1 0 2 0>; /* MDC */ + }; + }; + }; + + qe@e0080000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0080000 00040000>; + reg = <e0080000 480>; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = <212000>; + pio-handle = <e010001>; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = <212001>; + pio-handle = <e010002>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + ethernet-phy@00 { + linux,phandle = <212000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@01 { + linux,phandle = <212001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + ethernet-phy@02 { + linux,phandle = <212002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupt-parent = <40000>; + }; + + }; +}; |