diff options
Diffstat (limited to 'arch/powerpc/platforms/cell/cbe_regs.h')
| -rw-r--r-- | arch/powerpc/platforms/cell/cbe_regs.h | 203 |
1 files changed, 168 insertions, 35 deletions
diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index e76e4a6af5b..440a7ecc66e 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -4,12 +4,19 @@ * This file is intended to hold the various register definitions for CBE * on-chip system devices (memory controller, IO controller, etc...) * + * (C) Copyright IBM Corporation 2001,2006 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. */ #ifndef CBE_REGS_H #define CBE_REGS_H +#include <asm/cell-pmu.h> + /* * * Some HID register definitions @@ -22,6 +29,7 @@ #define HID0_CBE_THERM_INT_EN 0x0000000400000000ul #define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul +#define MAX_CBE 2 /* * @@ -29,51 +37,124 @@ * */ +union spe_reg { + u64 val; + u8 spe[8]; +}; + +union ppe_spe_reg { + u64 val; + struct { + u32 ppe; + u32 spe; + }; +}; + + struct cbe_pmd_regs { - u8 pad_0x0000_0x0800[0x0800 - 0x0000]; /* 0x0000 */ + /* Debug Bus Control */ + u64 pad_0x0000; /* 0x0000 */ + + u64 group_control; /* 0x0008 */ + + u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ + + u64 debug_bus_control; /* 0x00a8 */ + + u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ + + u64 trace_aux_data; /* 0x0100 */ + u64 trace_buffer_0_63; /* 0x0108 */ + u64 trace_buffer_64_127; /* 0x0110 */ + u64 trace_address; /* 0x0118 */ + u64 ext_tr_timer; /* 0x0120 */ + + u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ + + /* Performance Monitor */ + u64 pm_status; /* 0x0400 */ + u64 pm_control; /* 0x0408 */ + u64 pm_interval; /* 0x0410 */ + u64 pm_ctr[4]; /* 0x0418 */ + u64 pm_start_stop; /* 0x0438 */ + u64 pm07_control[8]; /* 0x0440 */ + + u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ /* Thermal Sensor Registers */ - u64 ts_ctsr1; /* 0x0800 */ - u64 ts_ctsr2; /* 0x0808 */ - u64 ts_mtsr1; /* 0x0810 */ - u64 ts_mtsr2; /* 0x0818 */ - u64 ts_itr1; /* 0x0820 */ - u64 ts_itr2; /* 0x0828 */ - u64 ts_gitr; /* 0x0830 */ - u64 ts_isr; /* 0x0838 */ - u64 ts_imr; /* 0x0840 */ - u64 tm_cr1; /* 0x0848 */ - u64 tm_cr2; /* 0x0850 */ - u64 tm_simr; /* 0x0858 */ - u64 tm_tpr; /* 0x0860 */ - u64 tm_str1; /* 0x0868 */ - u64 tm_str2; /* 0x0870 */ - u64 tm_tsr; /* 0x0878 */ + union spe_reg ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + union spe_reg ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + union spe_reg ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + union spe_reg tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + union ppe_spe_reg tm_tpr; /* 0x0860 */ + union spe_reg tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + union ppe_spe_reg tm_tsr; /* 0x0878 */ /* Power Management */ - u64 pm_control; /* 0x0880 */ -#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 - u64 pm_status; /* 0x0888 */ + u64 pmcr; /* 0x0880 */ +#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pmsr; /* 0x0888 */ /* Time Base Register */ - u64 tbr; /* 0x0890 */ + u64 tbr; /* 0x0890 */ - u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ + u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ /* Fault Isolation Registers */ - u64 checkstop_fir; /* 0x0c00 */ - u64 recoverable_fir; - u64 spec_att_mchk_fir; - u64 fir_mode_reg; - u64 fir_enable_mask; + u64 checkstop_fir; /* 0x0c00 */ + u64 recoverable_fir; /* 0x0c08 */ + u64 spec_att_mchk_fir; /* 0x0c10 */ + u64 fir_mode_reg; /* 0x0c18 */ + u64 fir_enable_mask; /* 0x0c20 */ - u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ + u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ }; extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); /* + * PMU shadow registers + * + * Many of the registers in the performance monitoring unit are write-only, + * so we need to save a copy of what we write to those registers. + * + * The actual data counters are read/write. However, writing to the counters + * only takes effect if the PMU is enabled. Otherwise the value is stored in + * a hardware latch until the next time the PMU is enabled. So we save a copy + * of the counter values if we need to read them back while the PMU is + * disabled. The counter_value_in_latch field is a bitmap indicating which + * counters currently have a value waiting to be written. + */ + +struct cbe_pmd_shadow_regs { + u32 group_control; + u32 debug_bus_control; + u32 trace_address; + u32 ext_tr_timer; + u32 pm_status; + u32 pm_control; + u32 pm_interval; + u32 pm_start_stop; + u32 pm07_control[NR_CTRS]; + + u32 pm_ctr[NR_PHYS_CTRS]; + u32 counter_value_in_latch; +}; + +extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); +extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); + +/* * * IIC unit register definitions * @@ -102,18 +183,28 @@ struct cbe_iic_regs { /* IIC interrupt registers */ struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ - u64 iic_ir; /* 0x0440 */ - u64 iic_is; /* 0x0448 */ + + u64 iic_ir; /* 0x0440 */ +#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) +#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) +#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) +#define CBE_IIC_IR_IOC_0 0x0 +#define CBE_IIC_IR_IOC_1S 0xb +#define CBE_IIC_IR_PT_0 0xe +#define CBE_IIC_IR_PT_1 0xf + + u64 iic_is; /* 0x0448 */ +#define CBE_IIC_IS_PMI 0x2 u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ /* IOC FIR */ u64 ioc_fir_reset; /* 0x0500 */ - u64 ioc_fir_set; - u64 ioc_checkstop_enable; - u64 ioc_fir_error_mask; - u64 ioc_syserr_enable; - u64 ioc_fir; + u64 ioc_fir_set; /* 0x0508 */ + u64 ioc_checkstop_enable; /* 0x0510 */ + u64 ioc_fir_error_mask; /* 0x0518 */ + u64 ioc_syserr_enable; /* 0x0520 */ + u64 ioc_fir; /* 0x0528 */ u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ }; @@ -122,6 +213,48 @@ extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); +struct cbe_mic_tm_regs { + u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ + + u64 mic_ctl_cnfg2; /* 0x0040 */ +#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL +#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL +#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL +#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL + + u64 pad_0x0048; /* 0x0048 */ + + u64 mic_aux_trc_base; /* 0x0050 */ + u64 mic_aux_trc_max_addr; /* 0x0058 */ + u64 mic_aux_trc_cur_addr; /* 0x0060 */ + u64 mic_aux_trc_grf_addr; /* 0x0068 */ + u64 mic_aux_trc_grf_data; /* 0x0070 */ + + u64 pad_0x0078; /* 0x0078 */ + + u64 mic_ctl_cnfg_0; /* 0x0080 */ +#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL + + u64 pad_0x0088; /* 0x0088 */ + + u64 slow_fast_timer_0; /* 0x0090 */ + u64 slow_next_timer_0; /* 0x0098 */ + + u8 pad_0x00a0_0x01c0[0x01c0 - 0x0a0]; /* 0x00a0 */ + + u64 mic_ctl_cnfg_1; /* 0x01c0 */ +#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL + u64 pad_0x01c8; /* 0x01c8 */ + + u64 slow_fast_timer_1; /* 0x01d0 */ + u64 slow_next_timer_1; /* 0x01d8 */ + + u8 pad_0x01e0_0x1000[0x1000 - 0x01e0]; /* 0x01e0 */ +}; + +extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); +extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + /* Init this module early */ extern void cbe_regs_init(void); |