diff options
Diffstat (limited to 'arch/powerpc/platforms/cell/interrupt.h')
| -rw-r--r-- | arch/powerpc/platforms/cell/interrupt.h | 97 |
1 files changed, 62 insertions, 35 deletions
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 5560a92ec3a..9ba1d3c17b4 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -2,48 +2,76 @@ #define ASM_CELL_PIC_H #ifdef __KERNEL__ /* - * Mapping of IIC pending bits into per-node - * interrupt numbers. + * Mapping of IIC pending bits into per-node interrupt numbers. * - * IRQ FF CC SS PP FF CC SS PP Description + * Interrupt numbers are in the range 0...0x1ff where the top bit + * (0x100) represent the source node. Only 2 nodes are supported with + * the current code though it's trivial to extend that if necessary using + * higher level bits * - * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge - * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge - * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0 - * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1 - * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2 - * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI + * The bottom 8 bits are split into 2 type bits and 6 data bits that + * depend on the type: * - * F flags - * C class - * S source - * P Priority - * + node number - * * don't care + * 00 (0x00 | data) : normal interrupt. data is (class << 4) | source + * 01 (0x40 | data) : IO exception. data is the exception number as + * defined by bit numbers in IIC_SR + * 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority) + * and node is always 0 (IPIs are per-cpu, their source is + * not relevant) + * 11 (0xc0 | data) : reserved * - * A node consists of a Cell Broadband Engine and an optional - * south bridge device providing a maximum of 64 IRQs. - * The south bridge may be connected to either IOIF0 - * or IOIF1. - * Each SPE is represented as three IRQ lines, one per - * interrupt class. - * 16 IRQ numbers are reserved for inter processor - * interruptions, although these are only used in the - * range of the first node. + * In addition, interrupt number 0x80000000 is defined as always invalid + * (that is the node field is expected to never extend to move than 23 bits) * - * This scheme needs 128 IRQ numbers per BIF node ID, - * which means that with the total of 512 lines - * available, we can have a maximum of four nodes. */ enum { - IIC_IRQ_INVALID = 0xff, - IIC_IRQ_MAX = 0x3f, - IIC_IRQ_EXT_IOIF0 = 0x20, - IIC_IRQ_EXT_IOIF1 = 0x2b, - IIC_IRQ_IPI0 = 0x40, - IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ - IIC_SOURCE_COUNT = 0x50, + IIC_IRQ_INVALID = 0x80000000u, + IIC_IRQ_NODE_MASK = 0x100, + IIC_IRQ_NODE_SHIFT = 8, + IIC_IRQ_MAX = 0x1ff, + IIC_IRQ_TYPE_MASK = 0xc0, + IIC_IRQ_TYPE_NORMAL = 0x00, + IIC_IRQ_TYPE_IOEXC = 0x40, + IIC_IRQ_TYPE_IPI = 0x80, + IIC_IRQ_CLASS_SHIFT = 4, + IIC_IRQ_CLASS_0 = 0x00, + IIC_IRQ_CLASS_1 = 0x10, + IIC_IRQ_CLASS_2 = 0x20, + IIC_SOURCE_COUNT = 0x200, + + /* Here are defined the various source/dest units. Avoid using those + * definitions if you can, they are mostly here for reference + */ + IIC_UNIT_SPU_0 = 0x4, + IIC_UNIT_SPU_1 = 0x7, + IIC_UNIT_SPU_2 = 0x3, + IIC_UNIT_SPU_3 = 0x8, + IIC_UNIT_SPU_4 = 0x2, + IIC_UNIT_SPU_5 = 0x9, + IIC_UNIT_SPU_6 = 0x1, + IIC_UNIT_SPU_7 = 0xa, + IIC_UNIT_IOC_0 = 0x0, + IIC_UNIT_IOC_1 = 0xb, + IIC_UNIT_THREAD_0 = 0xe, /* target only */ + IIC_UNIT_THREAD_1 = 0xf, /* target only */ + IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */ + + /* Base numbers for the external interrupts */ + IIC_IRQ_EXT_IOIF0 = + IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0, + IIC_IRQ_EXT_IOIF1 = + IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1, + + /* Base numbers for the IIC_ISR interrupts */ + IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63, + IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62, + IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61, + IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60, + IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59, + + /* Which bits in IIC_ISR are edge sensitive */ + IIC_ISR_EDGE_MASK = 0x4ul, }; extern void iic_init_IRQ(void); @@ -52,7 +80,6 @@ extern void iic_request_IPIs(void); extern void iic_setup_cpu(void); extern u8 iic_get_target_id(int cpu); -extern struct irq_host *iic_get_irq_host(int node); extern void spider_init_IRQ(void); |