diff options
Diffstat (limited to 'arch/powerpc/platforms/pseries/eeh.c')
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh.c | 115 |
1 files changed, 114 insertions, 1 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index a06c91a4852..b760836bb9d 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -77,6 +77,9 @@ */ #define EEH_MAX_FAILS 100000 +/* Misc forward declaraions */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); + /* RTAS tokens */ static int ibm_set_eeh_option; static int ibm_set_slot_reset; @@ -366,6 +369,7 @@ static void pci_addr_cache_remove_device(struct pci_dev *dev) */ void __init pci_addr_cache_build(void) { + struct device_node *dn; struct pci_dev *dev = NULL; if (!eeh_subsystem_enabled) @@ -379,6 +383,10 @@ void __init pci_addr_cache_build(void) continue; } pci_addr_cache_insert_device(dev); + + /* Save the BAR's; firmware doesn't restore these after EEH reset */ + dn = pci_device_to_OF_node(dev); + eeh_save_bars(dev, PCI_DN(dn)); } #ifdef DEBUG @@ -775,6 +783,108 @@ rtas_set_slot_reset(struct pci_dn *pdn) } } +/* ------------------------------------------------------- */ +/** Save and restore of PCI BARs + * + * Although firmware will set up BARs during boot, it doesn't + * set up device BAR's after a device reset, although it will, + * if requested, set up bridge configuration. Thus, we need to + * configure the PCI devices ourselves. + */ + +/** + * __restore_bars - Restore the Base Address Registers + * Loads the PCI configuration space base address registers, + * the expansion ROM base address, the latency timer, and etc. + * from the saved values in the device node. + */ +static inline void __restore_bars (struct pci_dn *pdn) +{ + int i; + + if (NULL==pdn->phb) return; + for (i=4; i<10; i++) { + rtas_write_config(pdn, i*4, 4, pdn->config_space[i]); + } + + /* 12 == Expansion ROM Address */ + rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]); + +#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) +#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) + + rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + SAVED_BYTE(PCI_CACHE_LINE_SIZE)); + + rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + SAVED_BYTE(PCI_LATENCY_TIMER)); + + /* max latency, min grant, interrupt pin and line */ + rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); +} + +/** + * eeh_restore_bars - restore the PCI config space info + * + * This routine performs a recursive walk to the children + * of this device as well. + */ +void eeh_restore_bars(struct pci_dn *pdn) +{ + struct device_node *dn; + if (!pdn) + return; + + if (! pdn->eeh_is_bridge) + __restore_bars (pdn); + + dn = pdn->node->child; + while (dn) { + eeh_restore_bars (PCI_DN(dn)); + dn = dn->sibling; + } +} + +/** + * eeh_save_bars - save device bars + * + * Save the values of the device bars. Unlike the restore + * routine, this routine is *not* recursive. This is because + * PCI devices are added individuallly; but, for the restore, + * an entire slot is reset at a time. + */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +{ + int i; + + if (!pdev || !pdn ) + return; + + for (i = 0; i < 16; i++) + pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]); + + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdn->eeh_is_bridge = 1; +} + +void +rtas_configure_bridge(struct pci_dn *pdn) +{ + int token = rtas_token ("ibm,configure-bridge"); + int rc; + + if (token == RTAS_UNKNOWN_SERVICE) + return; + rc = rtas_call(token,3,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid)); + if (rc) { + printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", + rc, pdn->node->full_name); + } +} + /* ------------------------------------------------------------- */ /* The code below deals with enabling EEH for devices during the * early boot sequence. EEH must be enabled before any PCI probing @@ -977,6 +1087,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_early); void eeh_add_device_late(struct pci_dev *dev) { struct device_node *dn; + struct pci_dn *pdn; if (!dev || !eeh_subsystem_enabled) return; @@ -987,9 +1098,11 @@ void eeh_add_device_late(struct pci_dev *dev) pci_dev_get (dev); dn = pci_device_to_OF_node(dev); - PCI_DN(dn)->pcidev = dev; + pdn = PCI_DN(dn); + pdn->pcidev = dev; pci_addr_cache_insert_device (dev); + eeh_save_bars(dev, pdn); } EXPORT_SYMBOL_GPL(eeh_add_device_late); |