diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/44x/Kconfig | 10 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pasemi/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pasemi/misc.c | 97 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/power.c | 2 |
4 files changed, 104 insertions, 7 deletions
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index c062c4cbbed..1bfb2191010 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -61,7 +61,7 @@ config WARP select 440EP help This option enables support for the PIKA Warp(tm) Appliance. The Warp - is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP + is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP stations and trunks. See http://www.pikatechnologies.com/ and follow the "PIKA for Computer @@ -110,17 +110,17 @@ config 440GP config 440GX bool - select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_NEW_EMAC_ZMII #test only + select IBM_NEW_EMAC_TAH #test only config 440SP bool config 440SPe - select IBM_NEW_EMAC_EMAC4 bool + select IBM_NEW_EMAC_EMAC4 # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index 8f52d751579..ce6d789e074 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1,3 +1,3 @@ -obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o +obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o diff --git a/arch/powerpc/platforms/pasemi/misc.c b/arch/powerpc/platforms/pasemi/misc.c new file mode 100644 index 00000000000..ded7d152d00 --- /dev/null +++ b/arch/powerpc/platforms/pasemi/misc.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Parts based on arch/powerpc/sysdev/fsl_soc.c: + * + * 2006 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/i2c.h> + +#ifdef CONFIG_I2C_BOARDINFO +/* The below is from fsl_soc.c. It's copied because since there are no + * official bus bindings at this time it doesn't make sense to share across + * the platforms, even though they happen to be common. + */ +struct i2c_driver_device { + char *of_device; + char *i2c_driver; + char *i2c_type; +}; + +static struct i2c_driver_device i2c_devices[] __initdata = { + {"dallas,ds1338", "rtc-ds1307", "ds1338"}, +}; + +static int __init find_i2c_driver(struct device_node *node, + struct i2c_board_info *info) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { + if (!of_device_is_compatible(node, i2c_devices[i].of_device)) + continue; + if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver, + KOBJ_NAME_LEN) >= KOBJ_NAME_LEN || + strlcpy(info->type, i2c_devices[i].i2c_type, + I2C_NAME_SIZE) >= I2C_NAME_SIZE) + return -ENOMEM; + return 0; + } + return -ENODEV; +} + +static int __init pasemi_register_i2c_devices(void) +{ + struct pci_dev *pdev; + struct device_node *adap_node; + struct device_node *node; + + pdev = NULL; + while ((pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa003, pdev))) { + adap_node = pci_device_to_OF_node(pdev); + + if (!adap_node) + continue; + + node = NULL; + while ((node = of_get_next_child(adap_node, node))) { + struct i2c_board_info info = {}; + const u32 *addr; + int len; + + addr = of_get_property(node, "reg", &len); + if (!addr || len < sizeof(int) || + *addr > (1 << 10) - 1) { + printk(KERN_WARNING + "pasemi_register_i2c_devices: " + "invalid i2c device entry\n"); + continue; + } + + info.irq = irq_of_parse_and_map(node, 0); + if (info.irq == NO_IRQ) + info.irq = -1; + + if (find_i2c_driver(node, &info) < 0) + continue; + + info.addr = *addr; + + i2c_register_board_info(PCI_FUNC(pdev->devfn), &info, + 1); + } + } + return 0; +} +device_initcall(pasemi_register_i2c_devices); +#endif diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c index e95fc1594c8..6d626623644 100644 --- a/arch/powerpc/platforms/pseries/power.c +++ b/arch/powerpc/platforms/pseries/power.c @@ -75,7 +75,7 @@ core_initcall(pm_init); #else static int __init apo_pm_init(void) { - return (sysfs_create_file(power_kobj, &auto_poweron_attr)); + return (sysfs_create_file(power_kobj, &auto_poweron_attr.attr)); } __initcall(apo_pm_init); #endif |