aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/chrp/pci.c6
-rw-r--r--arch/powerpc/platforms/chrp/setup.c9
-rw-r--r--arch/powerpc/platforms/powermac/backlight.c7
-rw-r--r--arch/powerpc/platforms/powermac/feature.c45
-rw-r--r--arch/powerpc/platforms/powermac/pci.c23
-rw-r--r--arch/powerpc/platforms/powermac/setup.c25
-rw-r--r--arch/powerpc/platforms/powermac/smp.c5
7 files changed, 76 insertions, 44 deletions
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index de776e3889e..1469d6478f6 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -136,9 +136,11 @@ hydra_init(void)
struct device_node *np;
struct resource r;
- np = find_devices("mac-io");
- if (np == NULL || of_address_to_resource(np, 0, &r))
+ np = of_find_node_by_name(NULL, "mac-io");
+ if (np == NULL || of_address_to_resource(np, 0, &r)) {
+ of_node_put(np);
return 0;
+ }
Hydra = ioremap(r.start, r.end-r.start);
printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
printk("Hydra Feature_Control was %x",
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 9c1b231b1ff..1870038a8e0 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -468,7 +468,7 @@ static void __init chrp_find_8259(void)
* Also, Pegasos-type platforms don't have a proper node to start
* from anyway
*/
- for (np = find_devices("pci"); np != NULL; np = np->next) {
+ for_each_node_by_name(np, "pci") {
const unsigned int *addrp = of_get_property(np,
"8259-interrupt-acknowledge", NULL);
@@ -477,6 +477,7 @@ static void __init chrp_find_8259(void)
chrp_int_ack = addrp[of_n_addr_cells(np)-1];
break;
}
+ of_node_put(np);
if (np == NULL)
printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
" address, polling\n");
@@ -518,10 +519,11 @@ void __init chrp_init_IRQ(void)
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
/* see if there is a keyboard in the device tree
with a parent of type "adb" */
- for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+ for_each_node_by_name(kbd, "keyboard")
if (kbd->parent && kbd->parent->type
&& strcmp(kbd->parent->type, "adb") == 0)
break;
+ of_node_put(kbd);
if (kbd)
setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
#endif
@@ -547,7 +549,7 @@ chrp_init2(void)
/* Get the event scan rate for the rtas so we know how
* often it expects a heartbeat. -- Cort
*/
- device = find_devices("rtas");
+ device = of_find_node_by_name(NULL, "rtas");
if (device)
p = of_get_property(device, "rtas-event-scan-rate", NULL);
if (p && *p) {
@@ -576,6 +578,7 @@ chrp_init2(void)
printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
*p, interval);
}
+ of_node_put(device);
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index 0dc8a45c408..d679964ae2a 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -56,13 +56,16 @@ struct backlight_device *pmac_backlight;
int pmac_has_backlight_type(const char *type)
{
- struct device_node* bk_node = find_devices("backlight");
+ struct device_node* bk_node = of_find_node_by_name(NULL, "backlight");
if (bk_node) {
const char *prop = of_get_property(bk_node,
"backlight-control", NULL);
- if (prop && strncmp(prop, type, strlen(type)) == 0)
+ if (prop && strncmp(prop, type, strlen(type)) == 0) {
+ of_node_put(bk_node);
return 1;
+ }
+ of_node_put(bk_node);
}
return 0;
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 44f85507db3..52cfdd86c92 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2408,12 +2408,13 @@ static int __init probe_motherboard(void)
struct macio_chip *macio = &macio_chips[0];
const char *model = NULL;
struct device_node *dt;
+ int ret = 0;
/* Lookup known motherboard type in device-tree. First try an
* exact match on the "model" property, then try a "compatible"
* match is none is found.
*/
- dt = find_devices("device-tree");
+ dt = of_find_node_by_name(NULL, "device-tree");
if (dt != NULL)
model = of_get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
@@ -2478,15 +2479,18 @@ static int __init probe_motherboard(void)
break;
#endif /* CONFIG_POWER4 */
default:
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
found:
#ifndef CONFIG_POWER4
/* Fixup Hooper vs. Comet */
if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
- if (!mach_id_ptr)
- return -ENODEV;
+ if (!mach_id_ptr) {
+ ret = -ENODEV;
+ goto done;
+ }
/* Here, I used to disable the media-bay on comet. It
* appears this is wrong, the floppy connector is actually
* a kind of media-bay and works with the current driver.
@@ -2544,7 +2548,9 @@ found:
printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
- return 0;
+done:
+ of_node_put(dt);
+ return ret;
}
/* Initialize the Core99 UniNorth host bridge and memory controller
@@ -2747,12 +2753,14 @@ set_initial_features(void)
* differenciate them all and since that hack was there for a long
* time, I'll keep it around
*/
- if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
- struct macio_chip *macio = &macio_chips[0];
- MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
- } else if (macio_chips[0].type == macio_ohare) {
+ if (macio_chips[0].type == macio_ohare) {
struct macio_chip *macio = &macio_chips[0];
- MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ np = of_find_node_by_name(NULL, "via-pmu");
+ if (np)
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ else
+ MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+ of_node_put(np);
} else if (macio_chips[1].type == macio_ohare) {
struct macio_chip *macio = &macio_chips[1];
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
@@ -2845,14 +2853,13 @@ set_initial_features(void)
}
/* Switch airport off */
- np = find_devices("radio");
- while(np) {
+ for_each_node_by_name(np, "radio") {
if (np && np->parent == macio_chips[0].of_node) {
macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
core99_airport_enable(np, 0, 0);
}
- np = np->next;
}
+ of_node_put(np);
}
/* On all machines that support sound PM, switch sound off */
@@ -2872,16 +2879,12 @@ set_initial_features(void)
#endif /* CONFIG_POWER4 */
/* On all machines, switch modem & serial ports off */
- np = find_devices("ch-a");
- while(np) {
+ for_each_node_by_name(np, "ch-a")
initial_serial_shutdown(np);
- np = np->next;
- }
- np = find_devices("ch-b");
- while(np) {
+ of_node_put(np);
+ for_each_node_by_name(np, "ch-b")
initial_serial_shutdown(np);
- np = np->next;
- }
+ of_node_put(np);
}
void __init
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 092cef4160a..22c4ae4c693 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -622,13 +622,14 @@ static void __init init_p2pbridge(void)
/* XXX it would be better here to identify the specific
PCI-PCI bridge chip we have. */
- if ((p2pbridge = find_devices("pci-bridge")) == 0
+ p2pbridge = of_find_node_by_name(NULL, "pci-bridge");
+ if (p2pbridge == NULL
|| p2pbridge->parent == NULL
|| strcmp(p2pbridge->parent->name, "pci") != 0)
- return;
+ goto done;
if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
DBG("Can't find PCI infos for PCI<->PCI bridge\n");
- return;
+ goto done;
}
/* Warning: At this point, we have not yet renumbered all busses.
* So we must use OF walking to find out hose
@@ -636,16 +637,18 @@ static void __init init_p2pbridge(void)
hose = pci_find_hose_for_OF_device(p2pbridge);
if (!hose) {
DBG("Can't find hose for PCI<->PCI bridge\n");
- return;
+ goto done;
}
if (early_read_config_word(hose, bus, devfn,
PCI_BRIDGE_CONTROL, &val) < 0) {
printk(KERN_ERR "init_p2pbridge: couldn't read bridge"
" control\n");
- return;
+ goto done;
}
val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+done:
+ of_node_put(p2pbridge);
}
static void __init init_second_ohare(void)
@@ -1199,8 +1202,7 @@ void __init pmac_pcibios_after_init(void)
}
#endif /* CONFIG_BLK_DEV_IDE */
- nd = find_devices("firewire");
- while (nd) {
+ for_each_node_by_name(nd, "firewire") {
if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
device_is_compatible(nd, "pci106b,30") ||
device_is_compatible(nd, "pci11c1,5811"))
@@ -1208,15 +1210,14 @@ void __init pmac_pcibios_after_init(void)
pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
}
- nd = nd->next;
}
- nd = find_devices("ethernet");
- while (nd) {
+ of_node_put(nd);
+ for_each_node_by_name(nd, "ethernet") {
if (nd->parent && device_is_compatible(nd, "gmac")
&& device_is_compatible(nd->parent, "uni-north"))
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
- nd = nd->next;
}
+ of_node_put(nd);
}
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index ae37d3e2378..0444e07e8d7 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -193,8 +193,11 @@ static void pmac_show_cpuinfo(struct seq_file *m)
#ifndef CONFIG_ADB_CUDA
int find_via_cuda(void)
{
- if (!find_devices("via-cuda"))
+ struct device_node *dn = of_find_node_by_name(NULL, "via-cuda");
+
+ if (!dn)
return 0;
+ of_node_put(dn);
printk("WARNING ! Your machine is CUDA-based but your kernel\n");
printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n");
return 0;
@@ -204,8 +207,11 @@ int find_via_cuda(void)
#ifndef CONFIG_ADB_PMU
int find_via_pmu(void)
{
- if (!find_devices("via-pmu"))
+ struct device_node *dn = of_find_node_by_name(NULL, "via-pmu");
+
+ if (!dn)
return 0;
+ of_node_put(dn);
printk("WARNING ! Your machine is PMU-based but your kernel\n");
printk(" wasn't compiled with CONFIG_ADB_PMU option !\n");
return 0;
@@ -225,6 +231,8 @@ static volatile u32 *sysctrl_regs;
static void __init ohare_init(void)
{
+ struct device_node *dn;
+
/* this area has the CPU identification register
and some registers used by smp boards */
sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000);
@@ -234,7 +242,9 @@ static void __init ohare_init(void)
* We assume that we have a PSX memory controller iff
* we have an ohare I/O controller.
*/
- if (find_devices("ohare") != NULL) {
+ dn = of_find_node_by_name(NULL, "ohare");
+ if (dn) {
+ of_node_put(dn);
if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
if (sysctrl_regs[4] & 0x10)
sysctrl_regs[4] |= 0x04000020;
@@ -343,8 +353,15 @@ static void __init pmac_setup_arch(void)
#ifdef CONFIG_SMP
/* Check for Core99 */
- if (find_devices("uni-n") || find_devices("u3") || find_devices("u4"))
+ ic = of_find_node_by_name(NULL, "uni-n");
+ if (!ic)
+ ic = of_find_node_by_name(NULL, "u3");
+ if (!ic)
+ ic = of_find_node_by_name(NULL, "u4");
+ if (ic) {
+ of_node_put(ic);
smp_ops = &core99_smp_ops;
+ }
#ifdef CONFIG_PPC32
else
smp_ops = &psurge_smp_ops;
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 20f328678fd..6f32c4eca6e 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -264,6 +264,7 @@ static void __init psurge_quad_init(void)
static int __init smp_psurge_probe(void)
{
int i, ncpus;
+ struct device_node *dn;
/* We don't do SMP on the PPC601 -- paulus */
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
@@ -279,8 +280,10 @@ static int __init smp_psurge_probe(void)
* in the hammerhead memory controller in the case of the
* dual-cpu powersurge board. -- paulus.
*/
- if (find_devices("hammerhead") == NULL)
+ dn = of_find_node_by_name(NULL, "hammerhead");
+ if (dn == NULL)
return 1;
+ of_node_put(dn);
hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 07:13:00 +0000