diff options
Diffstat (limited to 'arch/powerpc')
40 files changed, 722 insertions, 935 deletions
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 4680e201088..3e79bf0a315 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -44,8 +44,18 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + + + ranges = <00001000 e0001000 000ff000 + 80000000 80000000 20000000 + a0000000 a0000000 10000000 + b0000000 b0000000 00100000 + c0000000 c0000000 20000000 + b0100000 b0100000 00100000 + e1000000 e1000000 00010000 + e1010000 e1010000 00010000 + e1020000 e1020000 00010000>; + reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { @@ -161,8 +171,8 @@ interrupt-parent = <&mpic>; interrupts = <18 2>; bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 e1000000 0 00010000>; clock-frequency = <3f940aa>; #interrupt-cells = <1>; #size-cells = <2>; @@ -178,8 +188,8 @@ #address-cells = <3>; reg = <9000 1000>; bus-range = <0 ff>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e3000000 0 00800000>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e1010000 0 00010000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1a 2>; @@ -202,7 +212,7 @@ reg = <a000 1000>; bus-range = <0 ff>; ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; + 01000000 0 00000000 e1020000 0 00010000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <19 2>; @@ -224,49 +234,29 @@ #address-cells = <3>; reg = <b000 1000>; bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3800000 0 00800000>; + ranges = <02000000 0 b0000000 b0000000 0 00100000 + 01000000 0 00000000 b0100000 0 00100000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1b 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <fb00 0 0 0>; interrupt-map = < - - // IDSEL 0x1a - d000 0 0 1 &i8259 6 2 - d000 0 0 2 &i8259 3 2 - d000 0 0 3 &i8259 4 2 - d000 0 0 4 &i8259 5 2 - - // IDSEL 0x1b - d800 0 0 1 &i8259 5 2 - d800 0 0 2 &i8259 0 0 - d800 0 0 3 &i8259 0 0 - d800 0 0 4 &i8259 0 0 - // IDSEL 0x1c USB - e000 0 0 1 &i8259 9 2 - e000 0 0 2 &i8259 a 2 - e000 0 0 3 &i8259 c 2 - e000 0 0 4 &i8259 7 2 + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 9 2 - e800 0 0 2 &i8259 a 2 - e800 0 0 3 &i8259 b 2 - e800 0 0 4 &i8259 0 0 + e800 0 0 0 &i8259 6 2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 c 2 - f000 0 0 2 &i8259 0 0 - f000 0 0 3 &i8259 0 0 - f000 0 0 4 &i8259 0 0 + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 6 2 - f800 0 0 2 &i8259 0 0 - f800 0 0 3 &i8259 0 0 - f800 0 0 4 &i8259 0 0 + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 >; uli1575@0 { reg = <0 0 0 0 0>; @@ -274,10 +264,10 @@ #address-cells = <3>; ranges = <02000000 0 b0000000 02000000 0 b0000000 - 0 10000000 + 0 00100000 01000000 0 00000000 01000000 0 00000000 - 0 00080000>; + 0 00100000>; pci_bridge@0 { reg = <0 0 0 0 0>; @@ -285,10 +275,10 @@ #address-cells = <3>; ranges = <02000000 0 b0000000 02000000 0 b0000000 - 0 20000000 + 0 00100000 01000000 0 00000000 01000000 0 00000000 - 0 00100000>; + 0 00100000>; isa@1e { device_type = "isa"; @@ -296,7 +286,8 @@ #size-cells = <1>; #address-cells = <2>; reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 + ranges = <1 0 + 01000000 0 0 00001000>; interrupt-parent = <&i8259>; @@ -312,8 +303,7 @@ built-in; compatible = "chrp,iic"; interrupts = <9 2>; - interrupt-parent = - <&mpic>; + interrupt-parent = <&mpic>; }; i8042@60 { @@ -321,8 +311,7 @@ #address-cells = <1>; reg = <1 60 1 1 64 1>; interrupts = <1 3 c 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -336,8 +325,7 @@ }; rtc@70 { - compatible = - "pnpPNP,b00"; + compatible = "pnpPNP,b00"; reg = <1 70 2>; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 5d82709cfcb..b0166e5c177 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -224,98 +224,36 @@ clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <18 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <fb00 0 0 0>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &i8259 3 2 - 8800 0 0 2 &i8259 4 2 - 8800 0 0 3 &i8259 5 2 - 8800 0 0 4 &i8259 6 2 + 8800 0 0 1 &i8259 9 2 + 8800 0 0 2 &i8259 a 2 + 8800 0 0 3 &i8259 b 2 + 8800 0 0 4 &i8259 c 2 /* IDSEL 0x12 */ - 9000 0 0 1 &i8259 4 2 - 9000 0 0 2 &i8259 5 2 - 9000 0 0 3 &i8259 6 2 - 9000 0 0 4 &i8259 3 2 - - /* IDSEL 0x13 */ - 9800 0 0 1 &i8259 0 0 - 9800 0 0 2 &i8259 0 0 - 9800 0 0 3 &i8259 0 0 - 9800 0 0 4 &i8259 0 0 - - /* IDSEL 0x14 */ - a000 0 0 1 &i8259 0 0 - a000 0 0 2 &i8259 0 0 - a000 0 0 3 &i8259 0 0 - a000 0 0 4 &i8259 0 0 - - /* IDSEL 0x15 */ - a800 0 0 1 &i8259 0 0 - a800 0 0 2 &i8259 0 0 - a800 0 0 3 &i8259 0 0 - a800 0 0 4 &i8259 0 0 - - /* IDSEL 0x16 */ - b000 0 0 1 &i8259 0 0 - b000 0 0 2 &i8259 0 0 - b000 0 0 3 &i8259 0 0 - b000 0 0 4 &i8259 0 0 - - /* IDSEL 0x17 */ - b800 0 0 1 &i8259 0 0 - b800 0 0 2 &i8259 0 0 - b800 0 0 3 &i8259 0 0 - b800 0 0 4 &i8259 0 0 - - /* IDSEL 0x18 */ - c000 0 0 1 &i8259 0 0 - c000 0 0 2 &i8259 0 0 - c000 0 0 3 &i8259 0 0 - c000 0 0 4 &i8259 0 0 - - /* IDSEL 0x19 */ - c800 0 0 1 &i8259 0 0 - c800 0 0 2 &i8259 0 0 - c800 0 0 3 &i8259 0 0 - c800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1a */ - d000 0 0 1 &i8259 6 2 - d000 0 0 2 &i8259 3 2 - d000 0 0 3 &i8259 4 2 - d000 0 0 4 &i8259 5 2 - - - /* IDSEL 0x1b */ - d800 0 0 1 &i8259 5 2 - d800 0 0 2 &i8259 0 0 - d800 0 0 3 &i8259 0 0 - d800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1c */ - e000 0 0 1 &i8259 9 2 - e000 0 0 2 &i8259 a 2 - e000 0 0 3 &i8259 c 2 - e000 0 0 4 &i8259 7 2 - - /* IDSEL 0x1d */ - e800 0 0 1 &i8259 9 2 - e800 0 0 2 &i8259 a 2 - e800 0 0 3 &i8259 b 2 - e800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1e */ - f000 0 0 1 &i8259 c 2 - f000 0 0 2 &i8259 0 0 - f000 0 0 3 &i8259 0 0 - f000 0 0 4 &i8259 0 0 - - /* IDSEL 0x1f */ - f800 0 0 1 &i8259 6 2 - f800 0 0 2 &i8259 0 0 - f800 0 0 3 &i8259 0 0 - f800 0 0 4 &i8259 0 0 + 9000 0 0 1 &i8259 a 2 + 9000 0 0 2 &i8259 b 2 + 9000 0 0 3 &i8259 c 2 + 9000 0 0 4 &i8259 9 2 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 >; uli1575@0 { reg = <0 0 0 0 0>; diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c index b732644788d..13761bf160c 100644 --- a/arch/powerpc/boot/flatdevtree.c +++ b/arch/powerpc/boot/flatdevtree.c @@ -134,20 +134,6 @@ static char *ft_next(struct ft_cxt *cxt, char *p, struct ft_atom *ret) #define HDR_SIZE _ALIGN(sizeof(struct boot_param_header), 8) #define EXPAND_INCR 1024 /* alloc this much extra when expanding */ -/* See if the regions are in the standard order and non-overlapping */ -static int ft_ordered(struct ft_cxt *cxt) -{ - char *p = (char *)cxt->bph + HDR_SIZE; - enum ft_rgn_id r; - - for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) { - if (p > cxt->rgn[r].start) - return 0; - p = cxt->rgn[r].start + cxt->rgn[r].size; - } - return p <= (char *)cxt->bph + cxt->max_size; -} - /* Copy the tree to a newly-allocated region and put things in order */ static int ft_reorder(struct ft_cxt *cxt, int nextra) { @@ -573,10 +559,6 @@ int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size, cxt->rgn[FT_STRUCT].size = struct_size(cxt); cxt->rgn[FT_STRINGS].start = blob + be32_to_cpu(bph->off_dt_strings); cxt->rgn[FT_STRINGS].size = be32_to_cpu(bph->dt_strings_size); - /* Leave as '0' to force first ft_make_space call to do a ft_reorder - * and move dt to an area allocated by realloc. - cxt->isordered = ft_ordered(cxt); - */ cxt->p = cxt->rgn[FT_STRUCT].start; cxt->str_anchor = cxt->rgn[FT_STRINGS].start; diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index d0b43df4442..ca7a197998e 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,9 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc6 -# Tue Jun 26 14:15:19 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 7 19:17:26 2007 # CONFIG_PPC64=y + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y @@ -15,6 +29,7 @@ CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -22,50 +37,32 @@ CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y +CONFIG_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set - -# -# Processor support -# -# CONFIG_POWER4_ONLY is not set -CONFIG_POWER3=y -CONFIG_POWER4=y -CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set # CONFIG_PPC_OF_PLATFORM_PCI is not set -CONFIG_ALTIVEC=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_VIRT_CPU_ACCOUNTING=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 @@ -100,10 +97,6 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -111,12 +104,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -136,7 +126,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_MULTIPLATFORM=y # CONFIG_EMBEDDED6xx is not set -# CONFIG_APUS is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_MPC52xx is not set @@ -223,6 +215,7 @@ CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y CONFIG_ARCH_MEMORY_PROBE=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set @@ -241,6 +234,7 @@ CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -365,6 +359,7 @@ CONFIG_WIRELESS_EXT=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -379,26 +374,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# +CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -411,11 +391,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65535 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -423,6 +400,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -455,37 +433,22 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set CONFIG_MII=m CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y CONFIG_GELIC_NET=y +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -518,15 +481,7 @@ CONFIG_USB_NET_MCS7830=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -604,10 +559,6 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set @@ -616,10 +567,6 @@ CONFIG_GEN_RTC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -628,11 +575,8 @@ CONFIG_GEN_RTC=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -657,6 +601,7 @@ CONFIG_GEN_RTC=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set @@ -691,11 +636,13 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=18 # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y +CONFIG_FB_LOGO_EXTRA=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y @@ -709,6 +656,8 @@ CONFIG_SOUND=y # Advanced Linux Sound Architecture # CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set @@ -735,6 +684,12 @@ CONFIG_SND_VERBOSE_PROCFS=y # # +# ALSA PowerPC devices +# +CONFIG_SND_PS3=y +CONFIG_SND_PS3_DEFAULT_START_DELAY=2000 + +# # USB devices # # CONFIG_SND_USB_AUDIO is not set @@ -747,13 +702,14 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SOC is not set # -# Open Sound System +# SoC Audio support for SuperH # -# CONFIG_SOUND_PRIME is not set # -# HID Devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -770,10 +726,7 @@ CONFIG_USB_HID=m # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -803,6 +756,7 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -879,31 +833,8 @@ CONFIG_USB_MON=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # @@ -920,6 +851,11 @@ CONFIG_USB_MON=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=m @@ -948,8 +884,8 @@ CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # @@ -1030,7 +966,6 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1096,6 +1031,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y @@ -1120,6 +1056,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1150,10 +1087,6 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -1191,7 +1124,4 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index f39a72f30aa..b0cb2e662c2 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -81,6 +81,7 @@ obj-y += iomap.o endif ifeq ($(CONFIG_PPC_ISERIES),y) +CFLAGS_lparmap.s += -g0 extra-y += lparmap.s $(obj)/head_64.o: $(obj)/lparmap.s AFLAGS_head_64.o += -I$(obj) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 9ef28da2c7f..952eba6701f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -389,8 +389,11 @@ BEGIN_FTR_SECTION ld r9,PACA_SLBSHADOWPTR(r13) li r12,0 std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */ + eieio std r7,SLBSHADOW_STACKVSID(r9) /* Save VSID */ + eieio std r0,SLBSHADOW_STACKESID(r9) /* Save ESID */ + eieio slbie r6 slbie r6 /* Workaround POWER5 < DD2.1 issue */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 1448af92c6a..171800002ed 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1672,8 +1672,9 @@ _GLOBAL(__start_initialization_multiplatform) * Are we booted from a PROM Of-type client-interface ? */ cmpldi cr0,r5,0 - bne .__boot_from_prom /* yes -> prom */ - + beq 1f + b .__boot_from_prom /* yes -> prom */ +1: /* Save parameters */ mr r31,r3 mr r30,r4 @@ -1701,7 +1702,7 @@ _GLOBAL(__start_initialization_multiplatform) bl .__mmu_off b .__after_prom_start -_STATIC(__boot_from_prom) +_INIT_STATIC(__boot_from_prom) /* Save parameters */ mr r31,r3 mr r30,r4 @@ -1768,9 +1769,10 @@ _STATIC(__after_prom_start) /* the source addr */ cmpdi r4,0 /* In some cases the loader may */ - beq .start_here_multiplatform /* have already put us at zero */ + bne 1f + b .start_here_multiplatform /* have already put us at zero */ /* so we can skip the copy. */ - LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */ +1: LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */ sub r5,r5,r27 li r6,0x100 /* Start offset, the first 0x100 */ @@ -1957,7 +1959,7 @@ _GLOBAL(enable_64b_mode) /* * This is where the main kernel code starts. */ -_STATIC(start_here_multiplatform) +_INIT_STATIC(start_here_multiplatform) /* get a new offset, now that the kernel has moved. */ bl .reloc_offset mr r26,r3 @@ -2019,7 +2021,7 @@ _STATIC(start_here_multiplatform) b . /* prevent speculative execution */ /* This is where all platforms converge execution */ -_STATIC(start_here_common) +_INIT_STATIC(start_here_common) /* relocation is on at this point */ /* The following code sets up the SP and TOC now that we are */ diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index e708ab7ca9e..8533de50347 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -301,9 +301,19 @@ _GLOBAL(_tlbie) mfspr r4,SPRN_MMUCR mfspr r5,SPRN_PID /* Get PID */ rlwimi r4,r5,0,24,31 /* Set TID */ - mtspr SPRN_MMUCR,r4 + /* We have to run the search with interrupts disabled, even critical + * and debug interrupts (in fact the only critical exceptions we have + * are debug and machine check). Otherwise an interrupt which causes + * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */ + mfmsr r5 + lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha + addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l + andc r6,r5,r6 + mtmsr r6 + mtspr SPRN_MMUCR,r4 tlbsx. r3, 0, r3 + mtmsr r5 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index cd35c969bb2..04a3109ae3c 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -581,8 +581,11 @@ pcibios_assign_resources(void) if ((r->flags & IORESOURCE_UNSET) && r->end && (!ppc_md.pcibios_enable_device_hook || !ppc_md.pcibios_enable_device_hook(dev, 1))) { + int rc; + r->flags &= ~IORESOURCE_UNSET; - pci_assign_resource(dev, idx); + rc = pci_assign_resource(dev, idx); + BUG_ON(rc); } } diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index a97e23ac197..291ffbc360c 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -313,6 +313,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { /* a PCI-PCI bridge */ diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 087c92f2a3e..1ea43160f54 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -212,11 +212,6 @@ int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic, atomic_set(&data.finished, 0); spin_lock(&call_lock); - /* Must grab online cpu count with preempt disabled, otherwise - * it can change. */ - num_cpus = num_online_cpus() - 1; - if (!num_cpus) - goto done; /* remove 'self' from the map */ if (cpu_isset(smp_processor_id(), map)) @@ -224,7 +219,9 @@ int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic, /* sanity check the map, remove any non-online processors. */ cpus_and(map, map, cpu_online_map); - if (cpus_empty(map)) + + num_cpus = cpus_weight(map); + if (!num_cpus) goto done; call_data = &data; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 2bb1cb91178..d8502e37751 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs) #ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) #else -#define get_mc_reason(regs) (mfspr(SPRN_MCSR)) +#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK) #endif #define REASON_FP ESR_FP #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) @@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs) printk("Data Cache Push Parity Error\n"); if (reason & MCSR_DCPERR) printk("Data Cache Parity Error\n"); - if (reason & MCSR_GL_CI) - printk("Guarded Load or Cache-Inhibited stwcx.\n"); if (reason & MCSR_BUS_IAERR) printk("Bus - Instruction Address Error\n"); if (reason & MCSR_BUS_RAERR) diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 4762ff7c14d..35eabfb5072 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -472,10 +472,12 @@ _GLOBAL(htab_call_hpte_insert1) /* Now try secondary slot */ /* real page number in r5, PTE RPN value + index */ - rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + andis. r0,r31,_PAGE_4K_PFN@h + srdi r5,r31,PTE_RPN_SHIFT + bne- 3f sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT add r5,r5,r25 - sldi r5,r5,HW_PAGE_SHIFT +3: sldi r5,r5,HW_PAGE_SHIFT /* Calculate secondary group hash */ andc r0,r27,r28 diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index bc7b0cedae5..a47151e806c 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -759,7 +759,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) mmu_psize_defs[mmu_vmalloc_psize].sllp) { get_paca()->vmalloc_sllp = mmu_psize_defs[mmu_vmalloc_psize].sllp; - slb_flush_and_rebolt(); + slb_vmalloc_update(); } #endif /* CONFIG_PPC_64K_PAGES */ @@ -795,7 +795,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, #ifdef CONFIG_PPC_MM_SLICES /* We only prefault standard pages for now */ - if (unlikely(get_slice_psize(mm, ea) != mm->context.user_psize)); + if (unlikely(get_slice_psize(mm, ea) != mm->context.user_psize)) return; #endif diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index de45aa82d97..c12adc3ddff 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -307,9 +307,9 @@ static void __init parse_drconf_memory(struct device_node *memory) const unsigned int *lm, *dm, *aa; unsigned int ls, ld, la; unsigned int n, aam, aalen; - unsigned long lmb_size, size; + unsigned long lmb_size, size, start; int nid, default_nid = 0; - unsigned int start, ai, flags; + unsigned int ai, flags; lm = of_get_property(memory, "ibm,lmb-size", &ls); dm = of_get_property(memory, "ibm,dynamic-memory", &ld); diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 304375a7357..a73d2d70097 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -53,7 +53,8 @@ static inline unsigned long mk_vsid_data(unsigned long ea, unsigned long flags) return (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | flags; } -static inline void slb_shadow_update(unsigned long esid, unsigned long vsid, +static inline void slb_shadow_update(unsigned long ea, + unsigned long flags, unsigned long entry) { /* @@ -61,28 +62,16 @@ static inline void slb_shadow_update(unsigned long esid, unsigned long vsid, * updating it. */ get_slb_shadow()->save_area[entry].esid = 0; - barrier(); - get_slb_shadow()->save_area[entry].vsid = vsid; - barrier(); - get_slb_shadow()->save_area[entry].esid = esid; - + smp_wmb(); + get_slb_shadow()->save_area[entry].vsid = mk_vsid_data(ea, flags); + smp_wmb(); + get_slb_shadow()->save_area[entry].esid = mk_esid_data(ea, entry); + smp_wmb(); } -static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags, - unsigned long entry) +static inline void slb_shadow_clear(unsigned long entry) { - /* - * Updating the shadow buffer before writing the SLB ensures - * we don't get a stale entry here if we get preempted by PHYP - * between these two statements. - */ - slb_shadow_update(mk_esid_data(ea, entry), mk_vsid_data(ea, flags), - entry); - - asm volatile("slbmte %0,%1" : - : "r" (mk_vsid_data(ea, flags)), - "r" (mk_esid_data(ea, entry)) - : "memory" ); + get_slb_shadow()->save_area[entry].esid = 0; } void slb_flush_and_rebolt(void) @@ -100,12 +89,13 @@ void slb_flush_and_rebolt(void) vflags = SLB_VSID_KERNEL | vmalloc_llp; ksp_esid_data = mk_esid_data(get_paca()->kstack, 2); - if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET) + if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET) { ksp_esid_data &= ~SLB_ESID_V; - - /* Only third entry (stack) may change here so only resave that */ - slb_shadow_update(ksp_esid_data, - mk_vsid_data(ksp_esid_data, lflags), 2); + slb_shadow_clear(2); + } else { + /* Update stack entry; others don't change */ + slb_shadow_update(get_paca()->kstack, lflags, 2); + } /* We need to do this all in asm, so we're sure we don't touch * the stack between the slbia and rebolting it. */ @@ -123,6 +113,15 @@ void slb_flush_and_rebolt(void) : "memory"); } +void slb_vmalloc_update(void) +{ + unsigned long vflags; + + vflags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_vmalloc_psize].sllp; + slb_shadow_update(VMALLOC_START, vflags, 1); + slb_flush_and_rebolt(); +} + /* Flush all user entries from the segment table of the current processor. */ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) { @@ -227,16 +226,12 @@ void slb_initialize(void) vflags = SLB_VSID_KERNEL | vmalloc_llp; /* Invalidate the entire SLB (even slot 0) & all the ERATS */ - asm volatile("isync":::"memory"); - asm volatile("slbmte %0,%0"::"r" (0) : "memory"); - asm volatile("isync; slbia; isync":::"memory"); - create_shadowed_slbe(PAGE_OFFSET, lflags, 0); - - create_shadowed_slbe(VMALLOC_START, vflags, 1); - - /* We don't bolt the stack for the time being - we're in boot, - * so the stack is in the bolted segment. By the time it goes - * elsewhere, we'll call _switch() which will bolt in the new - * one. */ - asm volatile("isync":::"memory"); + slb_shadow_update(PAGE_OFFSET, lflags, 0); + asm volatile("isync; slbia; sync; slbmte %0,%1; isync" :: + "r" (get_slb_shadow()->save_area[0].vsid), + "r" (get_slb_shadow()->save_area[0].esid) : "memory"); + + slb_shadow_update(VMALLOC_START, vflags, 1); + + slb_flush_and_rebolt(); } diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index f833dba2a02..d5fd3909d13 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -405,6 +405,8 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, if (len > mm->task_size) return -ENOMEM; + if (len & ((1ul << pshift) - 1)) + return -EINVAL; if (fixed && (addr & ((1ul << pshift) - 1))) return -EINVAL; if (fixed && addr > (mm->task_size - len)) diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index b39cb52c6fb..2c8e641a739 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -106,7 +106,6 @@ static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .type = "qe", }, - { .type = "mdio", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index b2b28a44738..090906170a4 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -70,7 +70,6 @@ static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .type = "qe", }, - { .type = "mdio", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 0e615fd65c1..84b58934aaf 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -113,7 +113,6 @@ static struct of_device_id mpc836x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .type = "qe", }, - { .type = "mdio", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index f58184086c8..f620171ad6b 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -33,6 +33,7 @@ config MPC8544_DS bool "Freescale MPC8544 DS" select PPC_I8259 select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8544 DS board diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c index 4905f6f8903..0f834d8be44 100644 --- a/arch/powerpc/platforms/85xx/mpc8544_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c @@ -114,211 +114,25 @@ void __init mpc8544_ds_pic_init(void) } #ifdef CONFIG_PCI -enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH }; +extern int uses_fsl_uli_m1575; +extern int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn); -/* - * Value in table -- IRQ number - */ -const unsigned char uli1575_irq_route_table[16] = { - 0, /* 0: Reserved */ - 0x8, - 0, /* 2: Reserved */ - 0x2, - 0x4, - 0x5, - 0x7, - 0x6, - 0, /* 8: Reserved */ - 0x1, - 0x3, - 0x9, - 0xb, - 0, /* 13: Reserved */ - 0xd, - 0xf, -}; - -static int __devinit -get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) -{ - struct of_irq oirq; - u32 laddr[3]; - struct device_node *hosenode = hose ? hose->arch_data : NULL; - - if (!hosenode) - return -EINVAL; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n", - laddr[0], slot, pin, oirq.specifier[0]); - return oirq.specifier[0]; -} - -/*8259*/ -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - unsigned short temp; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned char irq2pin[16]; - unsigned long pirq_map_word = 0; - u32 irq; - int i; - - /* - * ULI1575 interrupts route setup - */ - memset(irq2pin, 0, 16); /* Initialize default value 0 */ - - irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */ - - /* - * PIRQE -> PIRQF mapping set manually - * - * IRQ pin IRQ# - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - */ - for (i = 0; i < 4; i++) - irq2pin[i + 9] = PIRQE + i; - - /* Set IRQ-PIRQ Mapping to ULI1575 */ - for (i = 0; i < 16; i++) - if (irq2pin[i]) - pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) - << ((irq2pin[i] - PIRQA) * 4); - - pirq_map_word |= 1<<26; /* disable INTx in EP mode*/ - - /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ - DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", - (int)pirq_map_word); - pci_write_config_dword(dev, 0x48, pirq_map_word); - -#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ - do { \ - int irq; \ - irq = get_pci_irq_from_of(hose, slot, pin); \ - if (irq > 0 && irq < 16) \ - pci_write_config_byte(dev, reg, irq2pin[irq]); \ - else \ - printk(KERN_WARNING "ULI1575 device" \ - "(slot %d, pin %d) irq %d is invalid.\n", \ - slot, pin, irq); \ - } while(0) - - /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ - ULI1575_SET_DEV_IRQ(28, 1, 0x86); - - /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ - ULI1575_SET_DEV_IRQ(28, 2, 0x87); - - /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ - ULI1575_SET_DEV_IRQ(28, 3, 0x88); - - /* USB 2.0 controller, slot 28, pin 4 */ - irq = get_pci_irq_from_of(hose, 28, 4); - if (irq >= 0 && irq <= 15) - pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - - /* Audio controller, slot 29, pin 1 */ - ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - - /* Modem controller, slot 29, pin 2 */ - ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - - /* HD audio controller, slot 29, pin 3 */ - ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - - /* SMB interrupt: slot 30, pin 1 */ - ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - - /* PMU ACPI SCI interrupt: slot 30, pin 2 */ - ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - - /* Serial ATA interrupt: slot 31, pin 1 */ - ULI1575_SET_DEV_IRQ(31, 1, 0x8d); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); - pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); - -#undef ULI1575_SET_DEV_IRQ -} - -/* SATA */ -static void __devinit quirk_uli5288(struct pci_dev *dev) +static int mpc85xx_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { - unsigned char c; - - pci_read_config_byte(dev, 0x83, &c); - c |= 0x80; /* read/write lock */ - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */ - pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */ + struct device_node* node; + struct resource rsrc; - pci_read_config_byte(dev, 0x83, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev, 0x84, &c); - c |= 0x01; /* emulated PATA mode enabled */ - pci_write_config_byte(dev, 0x84, c); -} + node = (struct device_node *)hose->arch_data; + of_address_to_resource(node, 0, &rsrc); -/* PATA */ -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */ - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; /* Enable Native IRQ 14/15 */ - pci_write_config_word(dev, 0x4a, temp); -} + if ((rsrc.start & 0xfffff) == 0xb000) { + return uli_exclude_device(hose, bus, devfn); + } -/*Bridge*/ -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); /* mem access */ - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */ - pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */ - pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */ - dev->class |= 0x1; + return PCIBIOS_SUCCESSFUL; } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ /* @@ -342,6 +156,8 @@ static void __init mpc8544_ds_setup_arch(void) else fsl_add_bridge(np, 0); } + uses_fsl_uli_m1575 = 1; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif printk("MPC8544 DS board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index e8003bf00c9..be25ecd911b 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -142,7 +142,6 @@ static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .type = "qe", }, - { .type = "mdio", }, {}, }; diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 343b76d0d79..685b2fbbbe0 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -7,6 +7,7 @@ config MPC8641_HPCN bool "Freescale MPC8641 HPCN" select PPC_I8259 select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8641 HPCN board. diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index e9eaa0749ae..56b27caf7a2 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -107,220 +107,25 @@ mpc86xx_hpcn_init_irq(void) } #ifdef CONFIG_PCI +extern int uses_fsl_uli_m1575; +extern int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn); -enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; -const unsigned char uli1575_irq_route_table[16] = { - 0, /* 0: Reserved */ - 0x8, /* 1: 0b1000 */ - 0, /* 2: Reserved */ - 0x2, /* 3: 0b0010 */ - 0x4, /* 4: 0b0100 */ - 0x5, /* 5: 0b0101 */ - 0x7, /* 6: 0b0111 */ - 0x6, /* 7: 0b0110 */ - 0, /* 8: Reserved */ - 0x1, /* 9: 0b0001 */ - 0x3, /* 10: 0b0011 */ - 0x9, /* 11: 0b1001 */ - 0xb, /* 12: 0b1011 */ - 0, /* 13: Reserved */ - 0xd, /* 14, 0b1101 */ - 0xf, /* 15, 0b1111 */ -}; - -static int __devinit -get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) -{ - struct of_irq oirq; - u32 laddr[3]; - struct device_node *hosenode = hose ? hose->arch_data : NULL; - - if (!hosenode) return -EINVAL; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", - laddr[0], slot, pin, oirq.specifier[0]); - return oirq.specifier[0]; -} - -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - unsigned short temp; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned char irq2pin[16], c; - unsigned long pirq_map_word = 0; - u32 irq; - int i; - - /* - * ULI1575 interrupts route setup - */ - memset(irq2pin, 0, 16); /* Initialize default value 0 */ - - /* - * PIRQA -> PIRQD mapping read from OF-tree - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA - */ - for (i = 0; i < 4; i++){ - irq = get_pci_irq_from_of(hose, 17, i + 1); - if (irq > 0 && irq < 16) - irq2pin[irq] = PIRQA + i; - else - printk(KERN_WARNING "ULI1575 device" - "(slot %d, pin %d) irq %d is invalid.\n", - 17, i, irq); - } - - /* - * PIRQE -> PIRQF mapping set manually - * - * IRQ pin IRQ# - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - */ - for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; - - /* Set IRQ-PIRQ Mapping to ULI1575 */ - for (i = 0; i < 16; i++) - if (irq2pin[i]) - pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) - << ((irq2pin[i] - PIRQA) * 4); - - /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ - DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", - pirq_map_word); - pci_write_config_dword(dev, 0x48, pirq_map_word); - -#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ - do { \ - int irq; \ - irq = get_pci_irq_from_of(hose, slot, pin); \ - if (irq > 0 && irq < 16) \ - pci_write_config_byte(dev, reg, irq2pin[irq]); \ - else \ - printk(KERN_WARNING "ULI1575 device" \ - "(slot %d, pin %d) irq %d is invalid.\n", \ - slot, pin, irq); \ - } while(0) - - /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ - ULI1575_SET_DEV_IRQ(28, 1, 0x86); - - /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ - ULI1575_SET_DEV_IRQ(28, 2, 0x87); - - /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ - ULI1575_SET_DEV_IRQ(28, 3, 0x88); - - /* USB 2.0 controller, slot 28, pin 4 */ - irq = get_pci_irq_from_of(hose, 28, 4); - if (irq >= 0 && irq <=15) - pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - - /* Audio controller, slot 29, pin 1 */ - ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - - /* Modem controller, slot 29, pin 2 */ - ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - - /* HD audio controller, slot 29, pin 3 */ - ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - - /* SMB interrupt: slot 30, pin 1 */ - ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - - /* PMU ACPI SCI interrupt: slot 30, pin 2 */ - ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - - /* Serial ATA interrupt: slot 31, pin 1 */ - ULI1575_SET_DEV_IRQ(31, 1, 0x8d); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); - pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); - -#undef ULI1575_SET_DEV_IRQ - - /* Disable the HD interface and enable the AC97 interface. */ - pci_read_config_byte(dev, 0xb8, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0xb8, c); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) +static int mpc86xx_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { - unsigned char c; + struct device_node* node; + struct resource rsrc; - pci_read_config_byte(dev,0x83,&c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); + node = (struct device_node *)hose->arch_data; + of_address_to_resource(node, 0, &rsrc); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x0a, 0x06); - - pci_read_config_byte(dev,0x83,&c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev,0x84,&c); - c |= 0x01; - pci_write_config_byte(dev, 0x84, c); -} - -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); - dev->class &= ~0x5; - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; - pci_write_config_word(dev, 0x4a, temp); -} + if ((rsrc.start & 0xfffff) == 0x8000) { + return uli_exclude_device(hose, bus, devfn); + } -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x7c, temp); - dev->class |= 0x1; + return PCIBIOS_SUCCESSFUL; } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ @@ -353,6 +158,9 @@ mpc86xx_hpcn_setup_arch(void) else fsl_add_bridge(np, 0); } + uses_fsl_uli_m1575 = 1; + ppc_md.pci_exclude_device = mpc86xx_exclude_device; + #endif printk("MPC86xx HPCN board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 932538a93c2..cfc24974159 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -282,4 +282,12 @@ config AXON_RAM minor numbers are available in /proc/devices, /proc/partitions or in /sys/block/axonram?/dev. +config FSL_ULI1575 + bool + default n + help + Supports for the ULI1575 PCIe south bridge that exists on some + Freescale reference boards. The boards all use the ULI in pretty + much the same way. + endmenu diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index d6e041a46d2..d44e832b01f 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,3 +1,6 @@ + +obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o + ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ else diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 90124228b8f..095a30304c5 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -36,7 +36,6 @@ #include <asm/spu_priv1.h> #include <asm/xmon.h> #include <asm/prom.h> -#include "spu_priv1_mmio.h" const struct spu_management_ops *spu_management_ops; EXPORT_SYMBOL_GPL(spu_management_ops); @@ -636,138 +635,6 @@ static ssize_t spu_stat_show(struct sys_device *sysdev, char *buf) static SYSDEV_ATTR(stat, 0644, spu_stat_show, NULL); -/* Hardcoded affinity idxs for QS20 */ -#define SPES_PER_BE 8 -static int QS20_reg_idxs[SPES_PER_BE] = { 0, 2, 4, 6, 7, 5, 3, 1 }; -static int QS20_reg_memory[SPES_PER_BE] = { 1, 1, 0, 0, 0, 0, 0, 0 }; - -static struct spu *spu_lookup_reg(int node, u32 reg) -{ - struct spu *spu; - - list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { - if (*(u32 *)get_property(spu_devnode(spu), "reg", NULL) == reg) - return spu; - } - return NULL; -} - -static void init_aff_QS20_harcoded(void) -{ - int node, i; - struct spu *last_spu, *spu; - u32 reg; - - for (node = 0; node < MAX_NUMNODES; node++) { - last_spu = NULL; - for (i = 0; i < SPES_PER_BE; i++) { - reg = QS20_reg_idxs[i]; - spu = spu_lookup_reg(node, reg); - if (!spu) - continue; - spu->has_mem_affinity = QS20_reg_memory[reg]; - if (last_spu) - list_add_tail(&spu->aff_list, - &last_spu->aff_list); - last_spu = spu; - } - } -} - -static int of_has_vicinity(void) -{ - struct spu* spu; - - spu = list_entry(cbe_spu_info[0].spus.next, struct spu, cbe_list); - return of_find_property(spu_devnode(spu), "vicinity", NULL) != NULL; -} - -static struct spu *aff_devnode_spu(int cbe, struct device_node *dn) -{ - struct spu *spu; - - list_for_each_entry(spu, &cbe_spu_info[cbe].spus, cbe_list) - if (spu_devnode(spu) == dn) - return spu; - return NULL; -} - -static struct spu * -aff_node_next_to(int cbe, struct device_node *target, struct device_node *avoid) -{ - struct spu *spu; - const phandle *vic_handles; - int lenp, i; - - list_for_each_entry(spu, &cbe_spu_info[cbe].spus, cbe_list) { - if (spu_devnode(spu) == avoid) - continue; - vic_handles = get_property(spu_devnode(spu), "vicinity", &lenp); - for (i=0; i < (lenp / sizeof(phandle)); i++) { - if (vic_handles[i] == target->linux_phandle) - return spu; - } - } - return NULL; -} - -static void init_aff_fw_vicinity_node(int cbe) -{ - struct spu *spu, *last_spu; - struct device_node *vic_dn, *last_spu_dn; - phandle avoid_ph; - const phandle *vic_handles; - const char *name; - int lenp, i, added, mem_aff; - - last_spu = list_entry(cbe_spu_info[cbe].spus.next, struct spu, cbe_list); - avoid_ph = 0; - for (added = 1; added < cbe_spu_info[cbe].n_spus; added++) { - last_spu_dn = spu_devnode(last_spu); - vic_handles = get_property(last_spu_dn, "vicinity", &lenp); - - for (i = 0; i < (lenp / sizeof(phandle)); i++) { - if (vic_handles[i] == avoid_ph) - continue; - - vic_dn = of_find_node_by_phandle(vic_handles[i]); - if (!vic_dn) - continue; - - name = get_property(vic_dn, "name", NULL); - if (strcmp(name, "spe") == 0) { - spu = aff_devnode_spu(cbe, vic_dn); - avoid_ph = last_spu_dn->linux_phandle; - } - else { - mem_aff = strcmp(name, "mic-tm") == 0; - spu = aff_node_next_to(cbe, vic_dn, last_spu_dn); - if (!spu) - continue; - if (mem_aff) { - last_spu->has_mem_affinity = 1; - spu->has_mem_affinity = 1; - } - avoid_ph = vic_dn->linux_phandle; - } - list_add_tail(&spu->aff_list, &last_spu->aff_list); - last_spu = spu; - break; - } - } -} - -static void init_aff_fw_vicinity(void) -{ - int cbe; - - /* sets has_mem_affinity for each spu, as long as the - * spu->aff_list list, linking each spu to its neighbors - */ - for (cbe = 0; cbe < MAX_NUMNODES; cbe++) - init_aff_fw_vicinity_node(cbe); -} - static int __init init_spu_base(void) { int i, ret = 0; @@ -811,13 +678,7 @@ static int __init init_spu_base(void) mutex_unlock(&spu_full_list_mutex); spu_add_sysdev_attr(&attr_stat); - if (of_has_vicinity()) { - init_aff_fw_vicinity(); - } else { - long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) - init_aff_QS20_harcoded(); - } + spu_init_affinity(); return 0; diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index 75ed50fcc3d..5eb88346181 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -361,8 +361,171 @@ static int of_destroy_spu(struct spu *spu) return 0; } +/* Hardcoded affinity idxs for qs20 */ +#define QS20_SPES_PER_BE 8 +static int qs20_reg_idxs[QS20_SPES_PER_BE] = { 0, 2, 4, 6, 7, 5, 3, 1 }; +static int qs20_reg_memory[QS20_SPES_PER_BE] = { 1, 1, 0, 0, 0, 0, 0, 0 }; + +static struct spu *spu_lookup_reg(int node, u32 reg) +{ + struct spu *spu; + u32 *spu_reg; + + list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { + spu_reg = (u32*)of_get_property(spu_devnode(spu), "reg", NULL); + if (*spu_reg == reg) + return spu; + } + return NULL; +} + +static void init_affinity_qs20_harcoded(void) +{ + int node, i; + struct spu *last_spu, *spu; + u32 reg; + + for (node = 0; node < MAX_NUMNODES; node++) { + last_spu = NULL; + for (i = 0; i < QS20_SPES_PER_BE; i++) { + reg = qs20_reg_idxs[i]; + spu = spu_lookup_reg(node, reg); + if (!spu) + continue; + spu->has_mem_affinity = qs20_reg_memory[reg]; + if (last_spu) + list_add_tail(&spu->aff_list, + &last_spu->aff_list); + last_spu = spu; + } + } +} + +static int of_has_vicinity(void) +{ + struct spu* spu; + + spu = list_first_entry(&cbe_spu_info[0].spus, struct spu, cbe_list); + return of_find_property(spu_devnode(spu), "vicinity", NULL) != NULL; +} + +static struct spu *devnode_spu(int cbe, struct device_node *dn) +{ + struct spu *spu; + + list_for_each_entry(spu, &cbe_spu_info[cbe].spus, cbe_list) + if (spu_devnode(spu) == dn) + return spu; + return NULL; +} + +static struct spu * +neighbour_spu(int cbe, struct device_node *target, struct device_node *avoid) +{ + struct spu *spu; + struct device_node *spu_dn; + const phandle *vic_handles; + int lenp, i; + + list_for_each_entry(spu, &cbe_spu_info[cbe].spus, cbe_list) { + spu_dn = spu_devnode(spu); + if (spu_dn == avoid) + continue; + vic_handles = of_get_property(spu_dn, "vicinity", &lenp); + for (i=0; i < (lenp / sizeof(phandle)); i++) { + if (vic_handles[i] == target->linux_phandle) + return spu; + } + } + return NULL; +} + +static void init_affinity_node(int cbe) +{ + struct spu *spu, *last_spu; + struct device_node *vic_dn, *last_spu_dn; + phandle avoid_ph; + const phandle *vic_handles; + const char *name; + int lenp, i, added; + + last_spu = list_first_entry(&cbe_spu_info[cbe].spus, struct spu, + cbe_list); + avoid_ph = 0; + for (added = 1; added < cbe_spu_info[cbe].n_spus; added++) { + last_spu_dn = spu_devnode(last_spu); + vic_handles = of_get_property(last_spu_dn, "vicinity", &lenp); + + /* + * Walk through each phandle in vicinity property of the spu + * (tipically two vicinity phandles per spe node) + */ + for (i = 0; i < (lenp / sizeof(phandle)); i++) { + if (vic_handles[i] == avoid_ph) + continue; + + vic_dn = of_find_node_by_phandle(vic_handles[i]); + if (!vic_dn) + continue; + + /* a neighbour might be spe, mic-tm, or bif0 */ + name = of_get_property(vic_dn, "name", NULL); + if (!name) + continue; + + if (strcmp(name, "spe") == 0) { + spu = devnode_spu(cbe, vic_dn); + avoid_ph = last_spu_dn->linux_phandle; + } else { + /* + * "mic-tm" and "bif0" nodes do not have + * vicinity property. So we need to find the + * spe which has vic_dn as neighbour, but + * skipping the one we came from (last_spu_dn) + */ + spu = neighbour_spu(cbe, vic_dn, last_spu_dn); + if (!spu) + continue; + if (!strcmp(name, "mic-tm")) { + last_spu->has_mem_affinity = 1; + spu->has_mem_affinity = 1; + } + avoid_ph = vic_dn->linux_phandle; + } + + list_add_tail(&spu->aff_list, &last_spu->aff_list); + last_spu = spu; + break; + } + } +} + +static void init_affinity_fw(void) +{ + int cbe; + + for (cbe = 0; cbe < MAX_NUMNODES; cbe++) + init_affinity_node(cbe); +} + +static int __init init_affinity(void) +{ + if (of_has_vicinity()) { + init_affinity_fw(); + } else { + long root = of_get_flat_dt_root(); + if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) + init_affinity_qs20_harcoded(); + else + printk("No affinity configuration found"); + } + + return 0; +} + const struct spu_management_ops spu_management_of_ops = { .enumerate_spus = of_enumerate_spus, .create_spu = of_create_spu, .destroy_spu = of_destroy_spu, + .init_affinity = init_affinity, }; diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c index dd2c6688c8a..027ac32cc63 100644 --- a/arch/powerpc/platforms/cell/spu_syscalls.c +++ b/arch/powerpc/platforms/cell/spu_syscalls.c @@ -45,6 +45,7 @@ asmlinkage long sys_spu_create(const char __user *name, if (owner && try_module_get(owner)) { if (flags & SPU_CREATE_AFFINITY_SPU) { neighbor = fget_light(neighbor_fd, &fput_needed); + ret = -EBADF; if (neighbor) { ret = spufs_calls.create_thread(name, flags, mode, neighbor); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 758a80ac080..c784edd40ea 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -351,7 +351,8 @@ static void aff_set_ref_point_location(struct spu_gang *gang) lowest_offset = ctx->aff_offset; } - gang->aff_ref_spu = aff_ref_location(ctx, mem_aff, gs, lowest_offset); + gang->aff_ref_spu = aff_ref_location(gang->aff_ref_ctx, mem_aff, gs, + lowest_offset); } static struct spu *ctx_location(struct spu *ref, int offset, int node) diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c new file mode 100644 index 00000000000..afc9141be63 --- /dev/null +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -0,0 +1,255 @@ +/* + * ULI M1575 setup code - specific to Freescale boards + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> + +#include <asm/system.h> +#include <asm/pci-bridge.h> + +#define ULI_PIRQA 0x08 +#define ULI_PIRQB 0x09 +#define ULI_PIRQC 0x0a +#define ULI_PIRQD 0x0b +#define ULI_PIRQE 0x0c +#define ULI_PIRQF 0x0d +#define ULI_PIRQG 0x0e + +#define ULI_8259_NONE 0x00 +#define ULI_8259_IRQ1 0x08 +#define ULI_8259_IRQ3 0x02 +#define ULI_8259_IRQ4 0x04 +#define ULI_8259_IRQ5 0x05 +#define ULI_8259_IRQ6 0x07 +#define ULI_8259_IRQ7 0x06 +#define ULI_8259_IRQ9 0x01 +#define ULI_8259_IRQ10 0x03 +#define ULI_8259_IRQ11 0x09 +#define ULI_8259_IRQ12 0x0b +#define ULI_8259_IRQ14 0x0d +#define ULI_8259_IRQ15 0x0f + +u8 uli_pirq_to_irq[8] = { + ULI_8259_IRQ9, /* PIRQA */ + ULI_8259_IRQ10, /* PIRQB */ + ULI_8259_IRQ11, /* PIRQC */ + ULI_8259_IRQ12, /* PIRQD */ + ULI_8259_IRQ5, /* PIRQE */ + ULI_8259_IRQ6, /* PIRQF */ + ULI_8259_IRQ7, /* PIRQG */ + ULI_8259_NONE, /* PIRQH */ +}; + +/* set in board code if you want this quirks to do something */ +int uses_fsl_uli_m1575; + +/* Bridge */ +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + + if (!uses_fsl_uli_m1575) + return; + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* read/write lock */ + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + + /* set as P2P bridge */ + pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); + dev->class |= 0x1; + + /* restore lock */ + pci_write_config_byte(dev, 0x7c, temp); +} + + +static void __devinit quirk_uli1575(struct pci_dev *dev) +{ + int i; + + if (!uses_fsl_uli_m1575) + return; + + /* + * ULI1575 interrupts route setup + */ + + /* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */ + for (i = 0; i < 4; i++) { + u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4); + pci_write_config_byte(dev, 0x48 + i, val); + } + + /* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */ + pci_write_config_byte(dev, 0x86, ULI_PIRQD); + + /* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */ + pci_write_config_byte(dev, 0x87, ULI_PIRQA); + + /* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */ + pci_write_config_byte(dev, 0x88, ULI_PIRQB); + + /* Lan controller: dev 27, func 0 - IRQ6 */ + pci_write_config_byte(dev, 0x89, ULI_PIRQF); + + /* AC97 Audio controller: dev 29, func 0 - IRQ6 */ + pci_write_config_byte(dev, 0x8a, ULI_PIRQF); + + /* Modem controller: dev 29, func 1 - IRQ6 */ + pci_write_config_byte(dev, 0x8b, ULI_PIRQF); + + /* HD Audio controller: dev 29, func 2 - IRQ6 */ + pci_write_config_byte(dev, 0x8c, ULI_PIRQF); + + /* SATA controller: dev 31, func 1 - IRQ5 */ + pci_write_config_byte(dev, 0x8d, ULI_PIRQE); + + /* SMB interrupt: dev 30, func 1 - IRQ7 */ + pci_write_config_byte(dev, 0x8e, ULI_PIRQG); + + /* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */ + pci_write_config_byte(dev, 0x8f, ULI_PIRQG); + + /* USB 2.0 controller: dev 28, func 3 */ + pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14); + pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15); +} + +static void __devinit quirk_final_uli1575(struct pci_dev *dev) +{ + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + if (!uses_fsl_uli_m1575) + return; + + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); + + /* setup RTC */ + CMOS_WRITE(RTC_SET, RTC_CONTROL); + CMOS_WRITE(RTC_24H, RTC_CONTROL); + + /* ensure month, date, and week alarm fields are ignored */ + CMOS_WRITE(0, RTC_VALID); + + outb_p(0x7c, 0x72); + outb_p(RTC_ALARM_DONT_CARE, 0x73); + + outb_p(0x7d, 0x72); + outb_p(RTC_ALARM_DONT_CARE, 0x73); +} + +/* SATA */ +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + unsigned int d; + + if (!uses_fsl_uli_m1575) + return; + + /* read/write lock */ + pci_read_config_byte(dev, 0x83, &c); + pci_write_config_byte(dev, 0x83, c|0x80); + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &d); + d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8); + pci_write_config_dword(dev, PCI_CLASS_REVISION, d); + + /* restore lock */ + pci_write_config_byte(dev, 0x83, c); + + /* disable emulated PATA mode enabled */ + pci_read_config_byte(dev, 0x84, &c); + pci_write_config_byte(dev, 0x84, c & ~0x01); +} + +/* PATA */ +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + + if (!uses_fsl_uli_m1575) + return; + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE | + PCI_COMMAND_MASTER | PCI_COMMAND_IO); + + /* Enable Native IRQ 14/15 */ + pci_read_config_word(dev, 0x4a, &temp); + pci_write_config_word(dev, 0x4a, temp | 0x1000); +} + +/* We have to do a dummy read on the P2P for the RTC to work, WTF */ +static void __devinit quirk_final_uli5249(struct pci_dev *dev) +{ + int i; + u8 *dummy; + struct pci_bus *bus = dev->bus; + + for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { + if ((bus->resource[i]) && + (bus->resource[i]->flags & IORESOURCE_MEM)) { + dummy = ioremap(bus->resource[i]->start, 0x4); + if (dummy) { + in_8(dummy); + iounmap(dummy); + } + break; + } + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575); + +int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) +{ + if (bus == (hose->first_busno + 2)) { + /* exclude Modem controller */ + if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* exclude HD Audio controller */ + if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2)) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index f29705f8047..ba931be2175 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -826,13 +826,15 @@ core99_ata100_enable(struct device_node *node, long value) if (value) { if (pci_device_from_OF_node(node, &pbus, &pid) == 0) - pdev = pci_find_slot(pbus, pid); + pdev = pci_get_bus_and_slot(pbus, pid); if (pdev == NULL) return 0; rc = pci_enable_device(pdev); + if (rc == 0) + pci_set_master(pdev); + pci_dev_put(pdev); if (rc) return rc; - pci_set_master(pdev); } return 0; } diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index d4fc74f7bb1..67144d1d140 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -1,5 +1,5 @@ config PPC_PS3 - bool "Sony PS3 (incomplete)" + bool "Sony PS3" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL select USB_ARCH_HAS_OHCI @@ -10,10 +10,10 @@ config PPC_PS3 select MEMORY_HOTPLUG help This option enables support for the Sony PS3 game console - and other platforms using the PS3 hypervisor. - Support for this platform is not yet complete, so - enabling this will not result in a bootable kernel on a - PS3 system. + and other platforms using the PS3 hypervisor. Enabling this + option will allow building otheros.bld, a kernel image suitable + for programming into flash memory, and vmlinux, a kernel image + suitable for loading via kexec. menu "PS3 Platform Options" depends on PPC_PS3 diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 825ebb2cbc2..ce15cada88d 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -273,55 +273,58 @@ static int ps3stor_wait_for_completion(u64 dev_id, u64 tag, static int ps3_storage_wait_for_device(const struct ps3_repository_device *repo) { + int error = -ENODEV; int result; const u64 notification_dev_id = (u64)-1LL; const unsigned int timeout = HZ; u64 lpar; u64 tag; + void *buf; + enum ps3_notify_type { + notify_device_ready = 0, + notify_region_probe = 1, + notify_region_update = 2, + }; struct { u64 operation_code; /* must be zero */ - u64 event_mask; /* 1 = device ready */ + u64 event_mask; /* OR of 1UL << enum ps3_notify_type */ } *notify_cmd; struct { - u64 event_type; /* notify_device_ready */ + u64 event_type; /* enum ps3_notify_type */ u64 bus_id; u64 dev_id; u64 dev_type; u64 dev_port; } *notify_event; - enum { - notify_device_ready = 1 - }; pr_debug(" -> %s:%u: bus_id %u, dev_id %u, dev_type %u\n", __func__, __LINE__, repo->bus_id, repo->dev_id, repo->dev_type); - notify_cmd = kzalloc(512, GFP_KERNEL); - notify_event = (void *)notify_cmd; - if (!notify_cmd) + buf = kzalloc(512, GFP_KERNEL); + if (!buf) return -ENOMEM; - lpar = ps3_mm_phys_to_lpar(__pa(notify_cmd)); + lpar = ps3_mm_phys_to_lpar(__pa(buf)); + notify_cmd = buf; + notify_event = buf; result = lv1_open_device(repo->bus_id, notification_dev_id, 0); if (result) { printk(KERN_ERR "%s:%u: lv1_open_device %s\n", __func__, __LINE__, ps3_result(result)); - result = -ENODEV; goto fail_free; } /* Setup and write the request for device notification. */ - notify_cmd->operation_code = 0; /* must be zero */ - notify_cmd->event_mask = 0x01; /* device ready */ + notify_cmd->operation_code = 0; /* must be zero */ + notify_cmd->event_mask = 1UL << notify_region_probe; result = lv1_storage_write(notification_dev_id, 0, 0, 1, 0, lpar, &tag); if (result) { printk(KERN_ERR "%s:%u: write failed %s\n", __func__, __LINE__, ps3_result(result)); - result = -ENODEV; goto fail_close; } @@ -332,13 +335,11 @@ static int ps3_storage_wait_for_device(const struct ps3_repository_device *repo) if (result) { printk(KERN_ERR "%s:%u: write not completed %s\n", __func__, __LINE__, ps3_result(result)); - result = -ENODEV; goto fail_close; } /* Loop here processing the requested notification events. */ - result = -ENODEV; while (1) { memset(notify_event, 0, sizeof(*notify_event)); @@ -358,7 +359,7 @@ static int ps3_storage_wait_for_device(const struct ps3_repository_device *repo) break; } - if (notify_event->event_type != notify_device_ready || + if (notify_event->event_type != notify_region_probe || notify_event->bus_id != repo->bus_id) { pr_debug("%s:%u: bad notify_event: event %lu, " "dev_id %lu, dev_type %lu\n", @@ -371,7 +372,7 @@ static int ps3_storage_wait_for_device(const struct ps3_repository_device *repo) notify_event->dev_type == repo->dev_type) { pr_debug("%s:%u: device ready: dev_id %u\n", __func__, __LINE__, repo->dev_id); - result = 0; + error = 0; break; } @@ -386,9 +387,9 @@ static int ps3_storage_wait_for_device(const struct ps3_repository_device *repo) fail_close: lv1_close_device(repo->bus_id, notification_dev_id); fail_free: - kfree(notify_cmd); + kfree(buf); pr_debug(" <- %s:%u\n", __func__, __LINE__); - return result; + return error; } static int ps3_setup_storage_dev(const struct ps3_repository_device *repo, diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index aa05288de64..2952b22f1c8 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -109,7 +109,7 @@ static void ps3_panic(char *str) #if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \ defined(CONFIG_PS3_FLASH) || defined(CONFIG_PS3_FLASH_MODULE) -static void prealloc(struct ps3_prealloc *p) +static void __init prealloc(struct ps3_prealloc *p) { if (!p->size) return; diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index 502d80ed982..ac2a4b8a4c1 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -414,10 +414,16 @@ static int __init ps3_enumerate_spus(int (*fn)(void *data)) return num_resource_id; } +static int ps3_init_affinity(void) +{ + return 0; +} + const struct spu_management_ops spu_management_ps3_ops = { .enumerate_spus = ps3_enumerate_spus, .create_spu = ps3_create_spu, .destroy_spu = ps3_destroy_spu, + .init_affinity = ps3_init_affinity, }; /* spu_priv1_ops */ diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 9fb0ce5c717..114c90f8f56 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -251,6 +251,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transpare DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 727453d3e8b..1cf29c9d440 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/phy.h> #include <linux/fsl_devices.h> #include <linux/fs_enet_pd.h> diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index e276048b8c5..0c9ac7ee08f 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -20,14 +20,16 @@ static int __init add_rtc(void) { struct device_node *np; struct platform_device *pd; - struct resource res; + struct resource res[2]; int ret; + memset(&res, 0, sizeof(res)); + np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00"); if (!np) return -ENODEV; - ret = of_address_to_resource(np, 0, &res); + ret = of_address_to_resource(np, 0, &res[0]); of_node_put(np); if (ret) return ret; @@ -36,11 +38,18 @@ static int __init add_rtc(void) * RTC_PORT(x) is hardcoded in asm/mc146818rtc.h. Verify that the * address provided by the device node matches. */ - if (res.start != RTC_PORT(0)) + if (res[0].start != RTC_PORT(0)) return -EINVAL; + /* Use a fixed interrupt value of 8 since on PPC if we are using this + * its off an i8259 which we ensure has interrupt numbers 0..15. */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + pd = platform_device_register_simple("rtc_cmos", -1, - &res, 1); + &res[0], 2); + if (IS_ERR(pd)) return PTR_ERR(pd); |