diff options
Diffstat (limited to 'arch/ppc/8260_io/enet.c')
| -rw-r--r-- | arch/ppc/8260_io/enet.c | 865 |
1 files changed, 0 insertions, 865 deletions
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c deleted file mode 100644 index ec1defea9c1..00000000000 --- a/arch/ppc/8260_io/enet.c +++ /dev/null @@ -1,865 +0,0 @@ -/* - * Ethernet driver for Motorola MPC8260. - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * Copyright (c) 2000 MontaVista Software Inc. (source@mvista.com) - * 2.3.99 Updates - * - * I copied this from the 8xx CPM Ethernet driver, so follow the - * credits back through that. - * - * This version of the driver is somewhat selectable for the different - * processor/board combinations. It works for the boards I know about - * now, and should be easily modified to include others. Some of the - * configuration information is contained in <asm/cpm1.h> and the - * remainder is here. - * - * Buffer descriptors are kept in the CPM dual port RAM, and the frame - * buffers are in the host memory. - * - * Right now, I am very watseful with the buffers. I allocate memory - * pages and then divide them into 2K frame buffers. This way I know I - * have buffers large enough to hold one frame within one buffer descriptor. - * Once I get this working, I will use 64 or 128 byte CPM buffers, which - * will be much more memory efficient and will easily handle lots of - * small packets. - * - */ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> - -#include <asm/immap_cpm2.h> -#include <asm/pgtable.h> -#include <asm/mpc8260.h> -#include <asm/uaccess.h> -#include <asm/cpm2.h> -#include <asm/irq.h> - -/* - * Theory of Operation - * - * The MPC8260 CPM performs the Ethernet processing on an SCC. It can use - * an aribtrary number of buffers on byte boundaries, but must have at - * least two receive buffers to prevent constant overrun conditions. - * - * The buffer descriptors are allocated from the CPM dual port memory - * with the data buffers allocated from host memory, just like all other - * serial communication protocols. The host memory buffers are allocated - * from the free page pool, and then divided into smaller receive and - * transmit buffers. The size of the buffers should be a power of two, - * since that nicely divides the page. This creates a ring buffer - * structure similar to the LANCE and other controllers. - * - * Like the LANCE driver: - * The driver runs as two independent, single-threaded flows of control. One - * is the send-packet routine, which enforces single-threaded use by the - * cep->tx_busy flag. The other thread is the interrupt handler, which is - * single threaded by the hardware and other software. - */ - -/* The transmitter timeout - */ -#define TX_TIMEOUT (2*HZ) - -/* The number of Tx and Rx buffers. These are allocated from the page - * pool. The code may assume these are power of two, so it is best - * to keep them that size. - * We don't need to allocate pages for the transmitter. We just use - * the skbuffer directly. - */ -#define CPM_ENET_RX_PAGES 4 -#define CPM_ENET_RX_FRSIZE 2048 -#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE) -#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES) -#define TX_RING_SIZE 8 /* Must be power of two */ -#define TX_RING_MOD_MASK 7 /* for this to work */ - -/* The CPM stores dest/src/type, data, and checksum for receive packets. - */ -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - -/* The CPM buffer descriptors track the ring buffers. The rx_bd_base and - * tx_bd_base always point to the base of the buffer descriptors. The - * cur_rx and cur_tx point to the currently available buffer. - * The dirty_tx tracks the current buffer that is being sent by the - * controller. The cur_tx and dirty_tx are equal under both completely - * empty and completely full conditions. The empty/ready indicator in - * the buffer descriptor determines the actual condition. - */ -struct scc_enet_private { - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - ushort skb_cur; - ushort skb_dirty; - - /* CPM dual port RAM relative addresses. - */ - cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ - cbd_t *tx_bd_base; - cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ - cbd_t *dirty_tx; /* The ring entries to be free()ed. */ - scc_t *sccp; - struct net_device_stats stats; - uint tx_full; - spinlock_t lock; -}; - -static int scc_enet_open(struct net_device *dev); -static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); -static int scc_enet_rx(struct net_device *dev); -static irqreturn_t scc_enet_interrupt(int irq, void *dev_id); -static int scc_enet_close(struct net_device *dev); -static struct net_device_stats *scc_enet_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* These will be configurable for the SCC choice. -*/ -#define CPM_ENET_BLOCK CPM_CR_SCC1_SBLOCK -#define CPM_ENET_PAGE CPM_CR_SCC1_PAGE -#define PROFF_ENET PROFF_SCC1 -#define SCC_ENET 0 -#define SIU_INT_ENET SIU_INT_SCC1 - -/* These are both board and SCC dependent.... -*/ -#define PD_ENET_RXD ((uint)0x00000001) -#define PD_ENET_TXD ((uint)0x00000002) -#define PD_ENET_TENA ((uint)0x00000004) -#define PC_ENET_RENA ((uint)0x00020000) -#define PC_ENET_CLSN ((uint)0x00000004) -#define PC_ENET_TXCLK ((uint)0x00000800) -#define PC_ENET_RXCLK ((uint)0x00000400) -#define CMX_CLK_ROUTE ((uint)0x25000000) -#define CMX_CLK_MASK ((uint)0xff000000) - -/* Specific to a board. -*/ -#define PC_EST8260_ENET_LOOPBACK ((uint)0x80000000) -#define PC_EST8260_ENET_SQE ((uint)0x40000000) -#define PC_EST8260_ENET_NOTFD ((uint)0x20000000) - -static int -scc_enet_open(struct net_device *dev) -{ - - /* I should reset the ring buffers here, but I don't yet know - * a simple way to do that. - */ - netif_start_queue(dev); - return 0; /* Always succeed */ -} - -static int -scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; - volatile cbd_t *bdp; - - - /* Fill in a Tx ring entry */ - bdp = cep->cur_tx; - -#ifndef final_version - if (bdp->cbd_sc & BD_ENET_TX_READY) { - /* Ooops. All transmit buffers are full. Bail out. - * This should not happen, since cep->tx_full should be set. - */ - printk("%s: tx queue full!.\n", dev->name); - return 1; - } -#endif - - /* Clear all of the status flags. - */ - bdp->cbd_sc &= ~BD_ENET_TX_STATS; - - /* If the frame is short, tell CPM to pad it. - */ - if (skb->len <= ETH_ZLEN) - bdp->cbd_sc |= BD_ENET_TX_PAD; - else - bdp->cbd_sc &= ~BD_ENET_TX_PAD; - - /* Set buffer length and buffer pointer. - */ - bdp->cbd_datlen = skb->len; - bdp->cbd_bufaddr = __pa(skb->data); - - /* Save skb pointer. - */ - cep->tx_skbuff[cep->skb_cur] = skb; - - cep->stats.tx_bytes += skb->len; - cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK; - - spin_lock_irq(&cep->lock); - - /* Send it on its way. Tell CPM its ready, interrupt when done, - * its the last BD of the frame, and to put the CRC on the end. - */ - bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC); - - dev->trans_start = jiffies; - - /* If this was the last BD in the ring, start at the beginning again. - */ - if (bdp->cbd_sc & BD_ENET_TX_WRAP) - bdp = cep->tx_bd_base; - else - bdp++; - - if (bdp->cbd_sc & BD_ENET_TX_READY) { - netif_stop_queue(dev); - cep->tx_full = 1; - } - - cep->cur_tx = (cbd_t *)bdp; - - spin_unlock_irq(&cep->lock); - - return 0; -} - -static void -scc_enet_timeout(struct net_device *dev) -{ - struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; - - printk("%s: transmit timed out.\n", dev->name); - cep->stats.tx_errors++; -#ifndef final_version - { - int i; - cbd_t *bdp; - printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n", - cep->cur_tx, cep->tx_full ? " (full)" : "", - cep->cur_rx); - bdp = cep->tx_bd_base; - printk(" Tx @base %p :\n", bdp); - for (i = 0 ; i < TX_RING_SIZE; i++, bdp++) - printk("%04x %04x %08x\n", - bdp->cbd_sc, - bdp->cbd_datlen, - bdp->cbd_bufaddr); - bdp = cep->rx_bd_base; - printk(" Rx @base %p :\n", bdp); - for (i = 0 ; i < RX_RING_SIZE; i++, bdp++) - printk("%04x %04x %08x\n", - bdp->cbd_sc, - bdp->cbd_datlen, - bdp->cbd_bufaddr); - } -#endif - if (!cep->tx_full) - netif_wake_queue(dev); -} - -/* The interrupt handler. - * This is called from the CPM handler, not the MPC core interrupt. - */ -static irqreturn_t -scc_enet_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - volatile struct scc_enet_private *cep; - volatile cbd_t *bdp; - ushort int_events; - int must_restart; - - cep = dev->priv; - - /* Get the interrupt events that caused us to be here. - */ - int_events = cep->sccp->scc_scce; - cep->sccp->scc_scce = int_events; - must_restart = 0; - - /* Handle receive event in its own function. - */ - if (int_events & SCCE_ENET_RXF) - scc_enet_rx(dev_id); - - /* Check for a transmit error. The manual is a little unclear - * about this, so the debug code until I get it figured out. It - * appears that if TXE is set, then TXB is not set. However, - * if carrier sense is lost during frame transmission, the TXE - * bit is set, "and continues the buffer transmission normally." - * I don't know if "normally" implies TXB is set when the buffer - * descriptor is closed.....trial and error :-). - */ - - /* Transmit OK, or non-fatal error. Update the buffer descriptors. - */ - if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) { - spin_lock(&cep->lock); - bdp = cep->dirty_tx; - while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) { - if ((bdp==cep->cur_tx) && (cep->tx_full == 0)) - break; - - if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ - cep->stats.tx_heartbeat_errors++; - if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ - cep->stats.tx_window_errors++; - if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ - cep->stats.tx_aborted_errors++; - if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ - cep->stats.tx_fifo_errors++; - if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ - cep->stats.tx_carrier_errors++; - - - /* No heartbeat or Lost carrier are not really bad errors. - * The others require a restart transmit command. - */ - if (bdp->cbd_sc & - (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) { - must_restart = 1; - cep->stats.tx_errors++; - } - - cep->stats.tx_packets++; - - /* Deferred means some collisions occurred during transmit, - * but we eventually sent the packet OK. - */ - if (bdp->cbd_sc & BD_ENET_TX_DEF) - cep->stats.collisions++; - - /* Free the sk buffer associated with this last transmit. - */ - dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]); - cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK; - - /* Update pointer to next buffer descriptor to be transmitted. - */ - if (bdp->cbd_sc & BD_ENET_TX_WRAP) - bdp = cep->tx_bd_base; - else - bdp++; - - /* I don't know if we can be held off from processing these - * interrupts for more than one frame time. I really hope - * not. In such a case, we would now want to check the - * currently available BD (cur_tx) and determine if any - * buffers between the dirty_tx and cur_tx have also been - * sent. We would want to process anything in between that - * does not have BD_ENET_TX_READY set. - */ - - /* Since we have freed up a buffer, the ring is no longer - * full. - */ - if (cep->tx_full) { - cep->tx_full = 0; - if (netif_queue_stopped(dev)) { - netif_wake_queue(dev); - } - } - - cep->dirty_tx = (cbd_t *)bdp; - } - - if (must_restart) { - volatile cpm_cpm2_t *cp; - - /* Some transmit errors cause the transmitter to shut - * down. We now issue a restart transmit. Since the - * errors close the BD and update the pointers, the restart - * _should_ pick up without having to reset any of our - * pointers either. - */ - - cp = cpmp; - cp->cp_cpcr = - mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0, - CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - } - spin_unlock(&cep->lock); - } - - /* Check for receive busy, i.e. packets coming but no place to - * put them. This "can't happen" because the receive interrupt - * is tossing previous frames. - */ - if (int_events & SCCE_ENET_BSY) { - cep->stats.rx_dropped++; - printk("SCC ENET: BSY can't happen.\n"); - } - - return IRQ_HANDLED; -} - -/* During a receive, the cur_rx points to the current incoming buffer. - * When we update through the ring, if the next incoming buffer has - * not been given to the system, we just set the empty indicator, - * effectively tossing the packet. - */ -static int -scc_enet_rx(struct net_device *dev) -{ - struct scc_enet_private *cep; - volatile cbd_t *bdp; - struct sk_buff *skb; - ushort pkt_len; - - cep = dev->priv; - - /* First, grab all of the stats for the incoming packet. - * These get messed up if we get called due to a busy condition. - */ - bdp = cep->cur_rx; - -for (;;) { - if (bdp->cbd_sc & BD_ENET_RX_EMPTY) - break; - -#ifndef final_version - /* Since we have allocated space to hold a complete frame, both - * the first and last indicators should be set. - */ - if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) != - (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) - printk("CPM ENET: rcv is not first+last\n"); -#endif - - /* Frame too long or too short. - */ - if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) - cep->stats.rx_length_errors++; - if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ - cep->stats.rx_frame_errors++; - if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ - cep->stats.rx_crc_errors++; - if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ - cep->stats.rx_crc_errors++; - - /* Report late collisions as a frame error. - * On this error, the BD is closed, but we don't know what we - * have in the buffer. So, just drop this frame on the floor. - */ - if (bdp->cbd_sc & BD_ENET_RX_CL) { - cep->stats.rx_frame_errors++; - } - else { - - /* Process the incoming frame. - */ - cep->stats.rx_packets++; - pkt_len = bdp->cbd_datlen; - cep->stats.rx_bytes += pkt_len; - - /* This does 16 byte alignment, much more than we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ - skb = dev_alloc_skb(pkt_len-4); - - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - cep->stats.rx_dropped++; - } - else { - skb_put(skb,pkt_len-4); /* Make room */ - skb_copy_to_linear_data(skb, - (unsigned char *)__va(bdp->cbd_bufaddr), - pkt_len-4); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - } - } - - /* Clear the status flags for this buffer. - */ - bdp->cbd_sc &= ~BD_ENET_RX_STATS; - - /* Mark the buffer empty. - */ - bdp->cbd_sc |= BD_ENET_RX_EMPTY; - - /* Update BD pointer to next entry. - */ - if (bdp->cbd_sc & BD_ENET_RX_WRAP) - bdp = cep->rx_bd_base; - else - bdp++; - - } - cep->cur_rx = (cbd_t *)bdp; - - return 0; -} - -static int -scc_enet_close(struct net_device *dev) -{ - /* Don't know what to do yet. - */ - netif_stop_queue(dev); - - return 0; -} - -static struct net_device_stats *scc_enet_get_stats(struct net_device *dev) -{ - struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; - - return &cep->stats; -} - -/* Set or clear the multicast filter for this adaptor. - * Skeleton taken from sunlance driver. - * The CPM Ethernet implementation allows Multicast as well as individual - * MAC address filtering. Some of the drivers check to make sure it is - * a group multicast address, and discard those that are not. I guess I - * will do the same for now, but just remove the test if you want - * individual filtering as well (do the upper net layers want or support - * this kind of feature?). - */ - -static void set_multicast_list(struct net_device *dev) -{ - struct scc_enet_private *cep; - struct dev_mc_list *dmi; - u_char *mcptr, *tdptr; - volatile scc_enet_t *ep; - int i, j; - cep = (struct scc_enet_private *)dev->priv; - - /* Get pointer to SCC area in parameter RAM. - */ - ep = (scc_enet_t *)dev->base_addr; - - if (dev->flags&IFF_PROMISC) { - - /* Log any net taps. */ - printk("%s: Promiscuous mode enabled.\n", dev->name); - cep->sccp->scc_psmr |= SCC_PSMR_PRO; - } else { - - cep->sccp->scc_psmr &= ~SCC_PSMR_PRO; - - if (dev->flags & IFF_ALLMULTI) { - /* Catch all multicast addresses, so set the - * filter to all 1's. - */ - ep->sen_gaddr1 = 0xffff; - ep->sen_gaddr2 = 0xffff; - ep->sen_gaddr3 = 0xffff; - ep->sen_gaddr4 = 0xffff; - } - else { - /* Clear filter and add the addresses in the list. - */ - ep->sen_gaddr1 = 0; - ep->sen_gaddr2 = 0; - ep->sen_gaddr3 = 0; - ep->sen_gaddr4 = 0; - - dmi = dev->mc_list; - - for (i=0; i<dev->mc_count; i++) { - - /* Only support group multicast for now. - */ - if (!(dmi->dmi_addr[0] & 1)) - continue; - - /* The address in dmi_addr is LSB first, - * and taddr is MSB first. We have to - * copy bytes MSB first from dmi_addr. - */ - mcptr = (u_char *)dmi->dmi_addr + 5; - tdptr = (u_char *)&ep->sen_taddrh; - for (j=0; j<6; j++) - *tdptr++ = *mcptr--; - - /* Ask CPM to run CRC and set bit in - * filter mask. - */ - cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, - CPM_ENET_BLOCK, 0, - CPM_CR_SET_GADDR) | CPM_CR_FLG; - /* this delay is necessary here -- Cort */ - udelay(10); - while (cpmp->cp_cpcr & CPM_CR_FLG); - } - } - } -} - -/* Initialize the CPM Ethernet on SCC. - */ -static int __init scc_enet_init(void) -{ - struct net_device *dev; - struct scc_enet_private *cep; - int i, j, err; - uint dp_offset; - unsigned char *eap; - unsigned long mem_addr; - bd_t *bd; - volatile cbd_t *bdp; - volatile cpm_cpm2_t *cp; - volatile scc_t *sccp; - volatile scc_enet_t *ep; - volatile cpm2_map_t *immap; - volatile iop_cpm2_t *io; - - cp = cpmp; /* Get pointer to Communication Processor */ - - immap = (cpm2_map_t *)CPM_MAP_ADDR; /* and to internal registers */ - io = &immap->im_ioport; - - bd = (bd_t *)__res; - - /* Create an Ethernet device instance. - */ - dev = alloc_etherdev(sizeof(*cep)); - if (!dev) - return -ENOMEM; - - cep = dev->priv; - spin_lock_init(&cep->lock); - - /* Get pointer to SCC area in parameter RAM. - */ - ep = (scc_enet_t *)(&immap->im_dprambase[PROFF_ENET]); - - /* And another to the SCC register area. - */ - sccp = (volatile scc_t *)(&immap->im_scc[SCC_ENET]); - cep->sccp = (scc_t *)sccp; /* Keep the pointer handy */ - - /* Disable receive and transmit in case someone left it running. - */ - sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - /* Configure port C and D pins for SCC Ethernet. This - * won't work for all SCC possibilities....it will be - * board/port specific. - */ - io->iop_pparc |= - (PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK); - io->iop_pdirc &= - ~(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK); - io->iop_psorc &= - ~(PC_ENET_RENA | PC_ENET_TXCLK | PC_ENET_RXCLK); - io->iop_psorc |= PC_ENET_CLSN; - - io->iop_ppard |= (PD_ENET_RXD | PD_ENET_TXD | PD_ENET_TENA); - io->iop_pdird |= (PD_ENET_TXD | PD_ENET_TENA); - io->iop_pdird &= ~PD_ENET_RXD; - io->iop_psord |= PD_ENET_TXD; - io->iop_psord &= ~(PD_ENET_RXD | PD_ENET_TENA); - - /* Configure Serial Interface clock routing. - * First, clear all SCC bits to zero, then set the ones we want. - */ - immap->im_cpmux.cmx_scr &= ~CMX_CLK_MASK; - immap->im_cpmux.cmx_scr |= CMX_CLK_ROUTE; - - /* Allocate space for the buffer descriptors in the DP ram. - * These are relative offsets in the DP ram address space. - * Initialize base addresses for the buffer descriptors. - */ - dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8); - ep->sen_genscc.scc_rbase = dp_offset; - cep->rx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset); - - dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8); - ep->sen_genscc.scc_tbase = dp_offset; - cep->tx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset); - - cep->dirty_tx = cep->cur_tx = cep->tx_bd_base; - cep->cur_rx = cep->rx_bd_base; - - ep->sen_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB; - ep->sen_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB; - - /* Set maximum bytes per receive buffer. - * This appears to be an Ethernet frame size, not the buffer - * fragment size. It must be a multiple of four. - */ - ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE; - - /* Set CRC preset and mask. - */ - ep->sen_cpres = 0xffffffff; - ep->sen_cmask = 0xdebb20e3; - - ep->sen_crcec = 0; /* CRC Error counter */ - ep->sen_alec = 0; /* alignment error counter */ - ep->sen_disfc = 0; /* discard frame counter */ - - ep->sen_pads = 0x8888; /* Tx short frame pad character */ - ep->sen_retlim = 15; /* Retry limit threshold */ - - ep->sen_maxflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ - ep->sen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ - - ep->sen_maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */ - ep->sen_maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */ - - /* Clear hash tables. - */ - ep->sen_gaddr1 = 0; - ep->sen_gaddr2 = 0; - ep->sen_gaddr3 = 0; - ep->sen_gaddr4 = 0; - ep->sen_iaddr1 = 0; - ep->sen_iaddr2 = 0; - ep->sen_iaddr3 = 0; - ep->sen_iaddr4 = 0; - - /* Set Ethernet station address. - * - * This is supplied in the board information structure, so we - * copy that into the controller. - */ - eap = (unsigned char *)&(ep->sen_paddrh); - for (i=5; i>=0; i--) - *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i]; - - ep->sen_pper = 0; /* 'cause the book says so */ - ep->sen_taddrl = 0; /* temp address (LSB) */ - ep->sen_taddrm = 0; - ep->sen_taddrh = 0; /* temp address (MSB) */ - - /* Now allocate the host memory pages and initialize the - * buffer descriptors. - */ - bdp = cep->tx_bd_base; - for (i=0; i<TX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. - */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - bdp = cep->rx_bd_base; - for (i=0; i<CPM_ENET_RX_PAGES; i++) { - - /* Allocate a page. - */ - mem_addr = __get_free_page(GFP_KERNEL); - /* BUG: no check for failure */ - - /* Initialize the BD for every fragment in the page. - */ - for (j=0; j<CPM_ENET_RX_FRPPG; j++) { - bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR; - bdp->cbd_bufaddr = __pa(mem_addr); - mem_addr += CPM_ENET_RX_FRSIZE; - bdp++; - } - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* Let's re-initialize the channel now. We have to do it later - * than the manual describes because we have just now finished - * the BD initialization. - */ - cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - cep->skb_cur = cep->skb_dirty = 0; - - sccp->scc_scce = 0xffff; /* Clear any pending events */ - - /* Enable interrupts for transmit error, complete frame - * received, and any transmit buffer we have also set the - * interrupt flag. - */ - sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB); - - /* Install our interrupt handler. - */ - request_irq(SIU_INT_ENET, scc_enet_interrupt, 0, "enet", dev); - /* BUG: no check for failure */ - - /* Set GSMR_H to enable all normal operating modes. - * Set GSMR_L to enable Ethernet to MC68160. - */ - sccp->scc_gsmrh = 0; - sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET); - - /* Set sync/delimiters. - */ - sccp->scc_dsr = 0xd555; - - /* Set processing mode. Use Ethernet CRC, catch broadcast, and - * start frame search 22 bit times after RENA. - */ - sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22); - - /* It is now OK to enable the Ethernet transmitter. - * Unfortunately, there are board implementation differences here. - */ - io->iop_pparc &= ~(PC_EST8260_ENET_LOOPBACK | - PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD); - io->iop_psorc &= ~(PC_EST8260_ENET_LOOPBACK | - PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD); - io->iop_pdirc |= (PC_EST8260_ENET_LOOPBACK | - PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD); - io->iop_pdatc &= ~(PC_EST8260_ENET_LOOPBACK | PC_EST8260_ENET_SQE); - io->iop_pdatc |= PC_EST8260_ENET_NOTFD; - - dev->base_addr = (unsigned long)ep; - - /* The CPM Ethernet specific entries in the device structure. */ - dev->open = scc_enet_open; - dev->hard_start_xmit = scc_enet_start_xmit; - dev->tx_timeout = scc_enet_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - dev->stop = scc_enet_close; - dev->get_stats = scc_enet_get_stats; - dev->set_multicast_list = set_multicast_list; - - /* And last, enable the transmit and receive processing. - */ - sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - err = register_netdev(dev); - if (err) { - free_netdev(dev); - return err; - } - - printk("%s: SCC ENET Version 0.1, ", dev->name); - for (i=0; i<5; i++) - printk("%02x:", dev->dev_addr[i]); - printk("%02x\n", dev->dev_addr[5]); - - return 0; -} - -module_init(scc_enet_init); |