aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/platforms/fads.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/fads.h')
-rw-r--r--arch/ppc/platforms/fads.h109
1 files changed, 103 insertions, 6 deletions
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index 632b8178ce6..b60c56450b6 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -3,7 +3,18 @@
* the Motorola 860T FADS board. Copied from the MBX stuff.
*
* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ *
+ * Added MPC86XADS support.
+ * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS
+ * for SW point of view". This is 99% correct.
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
*/
+
#ifdef __KERNEL__
#ifndef __ASM_FADS_H__
#define __ASM_FADS_H__
@@ -12,18 +23,45 @@
#include <asm/ppcboot.h>
+#if defined(CONFIG_MPC86XADS)
+
+/* U-Boot maps BCSR to 0xff080000 */
+#define BCSR_ADDR ((uint)0xff080000)
+
+/* MPC86XADS has one more CPLD and an additional BCSR.
+ */
+#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
+#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
+
+#define BCSR5_T1_RST 0x10
+#define BCSR5_ATM155_RST 0x08
+#define BCSR5_ATM25_RST 0x04
+#define BCSR5_MII1_EN 0x02
+#define BCSR5_MII1_RST 0x01
+
+/* There is no PHY link change interrupt */
+#define PHY_INTERRUPT (-1)
+
+#else /* FADS */
+
/* Memory map is configured by the PROM startup.
* I tried to follow the FADS manual, although the startup PROM
* dictates this and we simply have to move some of the physical
* addresses for Linux.
*/
#define BCSR_ADDR ((uint)0xff010000)
+
+/* PHY link change interrupt */
+#define PHY_INTERRUPT SIU_IRQ2
+
+#endif /* CONFIG_MPC86XADS */
+
#define BCSR_SIZE ((uint)(64 * 1024))
-#define BCSR0 ((uint)0xff010000)
-#define BCSR1 ((uint)0xff010004)
-#define BCSR2 ((uint)0xff010008)
-#define BCSR3 ((uint)0xff01000c)
-#define BCSR4 ((uint)0xff010010)
+#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
+#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
+#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
+#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
+#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
#define IMAP_ADDR ((uint)0xff000000)
#define IMAP_SIZE ((uint)(64 * 1024))
@@ -34,8 +72,17 @@
/* Bits of interest in the BCSRs.
*/
#define BCSR1_ETHEN ((uint)0x20000000)
+#define BCSR1_IRDAEN ((uint)0x10000000)
#define BCSR1_RS232EN_1 ((uint)0x01000000)
+#define BCSR1_PCCEN ((uint)0x00800000)
+#define BCSR1_PCCVCC0 ((uint)0x00400000)
+#define BCSR1_PCCVPP0 ((uint)0x00200000)
+#define BCSR1_PCCVPP1 ((uint)0x00100000)
+#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
#define BCSR1_RS232EN_2 ((uint)0x00040000)
+#define BCSR1_PCCVCC1 ((uint)0x00010000)
+#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
+
#define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */
#define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */
#define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */
@@ -44,14 +91,64 @@
#define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */
#define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */
+/* IO_BASE definition for pcmcia.
+ */
+#define _IO_BASE 0x80000000
+#define _IO_BASE_SIZE 0x1000
+
+#ifdef CONFIG_IDE
+#define MAX_HWIFS 1
+#endif
+
/* Interrupt level assignments.
*/
#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-#define PHY_INTERRUPT SIU_IRQ2 /* PHY link change interrupt */
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
+/* CPM Ethernet through SCC1 or SCC2 */
+
+#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ * TCLK - CLK1, RCLK - CLK2.
+ */
+#define PA_ENET_RXD ((ushort)0x0001)
+#define PA_ENET_TXD ((ushort)0x0002)
+#define PA_ENET_TCLK ((ushort)0x0100)
+#define PA_ENET_RCLK ((ushort)0x0200)
+#define PB_ENET_TENA ((uint)0x00001000)
+#define PC_ENET_CLSN ((ushort)0x0010)
+#define PC_ENET_RENA ((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000002c)
+#endif /* CONFIG_SCC1_ENET */
+
+#ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ * TCLK - CLK1, RCLK - CLK2.
+ */
+#define PA_ENET_RXD ((ushort)0x0004)
+#define PA_ENET_TXD ((ushort)0x0008)
+#define PA_ENET_TCLK ((ushort)0x0400)
+#define PA_ENET_RCLK ((ushort)0x0200)
+#define PB_ENET_TENA ((uint)0x00002000)
+#define PC_ENET_CLSN ((ushort)0x0040)
+#define PC_ENET_RENA ((ushort)0x0080)
+
+/* Control bits in the SICR to route TCLK and RCLK to
+ * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002e00)
+#endif /* CONFIG_SCC2_ENET */
+
#endif /* __ASM_FADS_H__ */
#endif /* __KERNEL__ */