diff options
Diffstat (limited to 'arch/ppc/platforms/tqm8xx.h')
| -rw-r--r-- | arch/ppc/platforms/tqm8xx.h | 155 |
1 files changed, 0 insertions, 155 deletions
diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h deleted file mode 100644 index 662131d0eb3..00000000000 --- a/arch/ppc/platforms/tqm8xx.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * TQM8xx(L) board specific definitions - * - * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de) - */ - -#ifdef __KERNEL__ -#ifndef __MACH_TQM8xx_H -#define __MACH_TQM8xx_H - - -#include <asm/ppcboot.h> - -#ifndef __ASSEMBLY__ -#define TQM_IMMR_BASE 0xFFF00000 /* phys. addr of IMMR */ -#define TQM_IMAP_SIZE (64 * 1024) /* size of mapped area */ - -#define IMAP_ADDR TQM_IMMR_BASE /* physical base address of IMMR area */ -#define IMAP_SIZE TQM_IMAP_SIZE /* mapped size of IMMR area */ - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define PCMCIA_MEM_SIZE ( 64 << 20 ) - -#ifndef CONFIG_KUP4K -# define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */ - -#else /* CONFIG_KUP4K */ - -# define MAX_HWIFS 2 /* overwrite default in include/asm-ppc/ide.h */ -# ifndef __ASSEMBLY__ -# include <asm/8xx_immap.h> -static __inline__ void ide_led(int on) -{ - volatile immap_t *immap = (immap_t *)IMAP_ADDR; - - if (on) { - immap->im_ioport.iop_padat &= ~0x80; - } else { - immap->im_ioport.iop_padat |= 0x80; - } -} -# endif /* __ASSEMBLY__ */ -# define IDE_LED(x) ide_led((x)) -#endif /* CONFIG_KUP4K */ - -/* - * Definitions for IDE0 Interface - */ -#define IDE0_BASE_OFFSET 0 -#define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320) -#define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1) -#define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2) -#define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3) -#define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4) -#define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5) -#define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6) -#define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7) -#define IDE0_CONTROL_REG_OFFSET 0x0106 -#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */ - -/* define IO_BASE for PCMCIA */ -#define _IO_BASE 0x80000000 -#define _IO_BASE_SIZE (64<<10) - -#define FEC_INTERRUPT 9 /* = SIU_LEVEL4 */ -#define PHY_INTERRUPT 12 /* = IRQ6 */ -#define IDE0_INTERRUPT 13 - -#ifdef CONFIG_IDE -#endif - -/*----------------------------------------------------------------------- - * CPM Ethernet through SCCx. - *----------------------------------------------------------------------- - * - */ - -/*** TQM823L, TQM850L ***********************************************/ - -#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - */ -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ - -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002600) -#endif /* CONFIG_TQM823L, CONFIG_TQM850L */ - -/*** TQM860L ********************************************************/ - -#ifdef CONFIG_TQM860L -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - */ -#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */ -#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */ -#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */ -#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */ -#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x00000026) -#endif /* CONFIG_TQM860L */ - -/*** FPS850L *********************************************************/ - -#ifdef CONFIG_FPS850L -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - */ -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */ -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002600) -#endif /* CONFIG_FPS850L */ - -/* We don't use the 8259. -*/ -#define NR_8259_INTS 0 - -#endif /* !__ASSEMBLY__ */ -#endif /* __MACH_TQM8xx_H */ -#endif /* __KERNEL__ */ |