diff options
Diffstat (limited to 'arch/ppc64/Kconfig')
-rw-r--r-- | arch/ppc64/Kconfig | 520 |
1 files changed, 0 insertions, 520 deletions
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig deleted file mode 100644 index 9d10c12e87f..00000000000 --- a/arch/ppc64/Kconfig +++ /dev/null @@ -1,520 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -config 64BIT - def_bool y - -config MMU - bool - default y - -config PPC_STD_MMU - def_bool y - -config UID16 - bool - -config RWSEM_GENERIC_SPINLOCK - bool - -config RWSEM_XCHGADD_ALGORITHM - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config GENERIC_ISA_DMA - bool - default y - -config EARLY_PRINTK - bool - default y - -config COMPAT - bool - default y - -config SCHED_NO_NO_OMIT_FRAME_POINTER - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - default y - -config PPC_STD_MMU - bool - default y - -# We optimistically allocate largepages from the VM, so make the limit -# large enough (16MB). This badly named config option is actually -# max order + 1 -config FORCE_MAX_ZONEORDER - int - default "9" if PPC_64K_PAGES - default "13" - -source "init/Kconfig" - -config SYSVIPC_COMPAT - bool - depends on COMPAT && SYSVIPC - default y - -menu "Platform support" - -choice - prompt "Platform Type" - default PPC_MULTIPLATFORM - -config PPC_ISERIES - bool "IBM Legacy iSeries" - -config PPC_MULTIPLATFORM - bool "Generic" - -endchoice - -config PPC_PSERIES - depends on PPC_MULTIPLATFORM - bool " IBM pSeries & new iSeries" - default y - -config PPC_BPA - bool " Broadband Processor Architecture" - depends on PPC_MULTIPLATFORM - -config PPC_PMAC - depends on PPC_MULTIPLATFORM - bool " Apple G5 based machines" - default y - select U3_DART - select GENERIC_TBSYNC - -config PPC_MAPLE - depends on PPC_MULTIPLATFORM - bool " Maple 970FX Evaluation Board" - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - default n - help - This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to <http://www.970eval.com> - -config PPC - bool - default y - -config PPC64 - bool - default y - -config PPC_OF - depends on PPC_MULTIPLATFORM - bool - default y - -config XICS - depends on PPC_PSERIES - bool - default y - -config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE - bool - default y - -config PPC_I8259 - depends on PPC_PSERIES - bool - default y - -config BPA_IIC - depends on PPC_BPA - bool - default y - -# VMX is pSeries only for now until somebody writes the iSeries -# exception vectors for it -config ALTIVEC - bool "Support for VMX (Altivec) vector unit" - depends on PPC_MULTIPLATFORM - default y - -config PPC_SPLPAR - depends on PPC_PSERIES - bool "Support for shared-processor logical partitions" - default n - help - Enabling this option will make the kernel run more efficiently - on logically-partitioned pSeries systems which use shared - processors, that is, which share physical processors between - two or more partitions. - -config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && EXPERIMENTAL - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similiarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - -source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on CPU_FREQ && PMAC_SMU && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config GENERIC_TBSYNC - def_bool n - -config PPC_PMAC64 - bool - depends on PPC_PMAC - default y - -config BOOTX_TEXT - bool "Support for early boot text console" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires an Open Firmware compatible video card. - -config POWER4 - def_bool y - -config PPC_FPU - def_bool y - -config POWER4_ONLY - bool "Optimize for POWER4" - default n - ---help--- - Cause the compiler to optimize for POWER4 processors. The resulting - binary will not work on POWER3 or RS64 processors when compiled with - binutils 2.15 or later. - -config IOMMU_VMERGE - bool "Enable IOMMU virtual merging (EXPERIMENTAL)" - depends on EXPERIMENTAL - default n - help - Cause IO segments sent to a device for DMA to be merged virtually - by the IOMMU when they happen to have been allocated contiguously. - This doesn't add pressure to the IOMMU allocator. However, some - drivers don't support getting large merged segments coming back - from *_map_sg(). Say Y if you know the drivers you are using are - properly handling this case. - -config SMP - bool "Symmetric multi-processing support" - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. - - If you say N here, the kernel will run on single and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on single-processor machines. - On a single-processor machine, the kernel will run faster if you say - N here. - - If you don't know what to do here, say Y. - -config NR_CPUS - int "Maximum number of CPUs (2-128)" - range 2 128 - depends on SMP - default "32" - -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - -config NUMA - bool "NUMA support" - default y if SMP && PPC_PSERIES - -config ARCH_SELECT_MEMORY_MODEL - def_bool y - -config ARCH_FLATMEM_ENABLE - def_bool y - depends on !NUMA - -config ARCH_SPARSEMEM_ENABLE - def_bool y - -config ARCH_SPARSEMEM_DEFAULT - def_bool y - depends on NUMA - -source "mm/Kconfig" - -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool y - depends on NEED_MULTIPLE_NODES - -config ARCH_MEMORY_PROBE - def_bool y - depends on MEMORY_HOTPLUG - -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - -config PPC_64K_PAGES - bool "64k page size" - help - This option changes the kernel logical page size to 64k. On machines - without processor support for 64k pages, the kernel will simulate - them by loading each individual 4k page on demand transparently, - while on hardware with such support, it will be used to map - normal application pages. - -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on SMP - default off - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with POWER5 cpus at a cost of slightly increased - overhead in some places. If unsure say N here. - -source "kernel/Kconfig.preempt" -source kernel/Kconfig.hz - -config EEH - bool "PCI Extended Error Handling (EEH)" if EMBEDDED - depends on PPC_PSERIES - default y if !EMBEDDED - -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config PPC_RTAS - bool - depends on PPC_PSERIES || PPC_BPA - default y - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default y - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on RTAS_PROC - -config SCANLOG - tristate "Scanlog dump interface" - depends on RTAS_PROC && PPC_PSERIES - -config LPARCFG - tristate "LPAR Configuration Data" - depends on PPC_PSERIES || PPC_ISERIES - help - Provide system capacity information via human readable - <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. - -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - -source "fs/Kconfig.binfmt" - -config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs" - depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) - select HOTPLUG - ---help--- - Say Y here to be able to turn CPUs off and on. - - Say N if you are unsure. - -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" - depends on !PPC_ISERIES - -config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttyS0,9600 console=tty0 root=/dev/sda2" - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - most cases you will need to specify the root device here. - -endmenu - -config ISA_DMA_API - bool - default y - -menu "Bus Options" - -config ISA - bool - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have an Apple machine, say N here; if you - have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If - you have an embedded board, consult your board documentation. - -config SBUS - bool - -config MCA - bool - -config EISA - bool - -config PCI - bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES) - default y - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - -config PCI_DOMAINS - bool - default PCI - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -source "drivers/pci/hotplug/Kconfig" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -menu "iSeries device drivers" - depends on PPC_ISERIES - -config VIOCONS - tristate "iSeries Virtual Console Support" - -config VIODASD - tristate "iSeries Virtual I/O disk support" - help - If you are running on an iSeries system and you want to use - virtual disks created and managed by OS/400, say Y. - -config VIOCD - tristate "iSeries Virtual I/O CD support" - help - If you are running Linux on an IBM iSeries system and you want to - read a CD drive owned by OS/400, say Y here. - -config VIOTAPE - tristate "iSeries Virtual Tape Support" - help - If you are running Linux on an iSeries system and you want Linux - to read and/or write a tape drive owned by OS/400, say Y here. - -endmenu - -config VIOPATH - bool - depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH - default y - -source "arch/powerpc/oprofile/Kconfig" - -source "arch/ppc64/Kconfig.debug" - -source "security/Kconfig" - -config KEYS_COMPAT - bool - depends on COMPAT && KEYS - default y - -source "crypto/Kconfig" - -source "lib/Kconfig" |