diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/sdram.S | 59 | ||||
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 87 |
2 files changed, 124 insertions, 22 deletions
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S index 83344004440..3963c6f23d5 100644 --- a/arch/sh/boards/mach-ecovec24/sdram.S +++ b/arch/sh/boards/mach-ecovec24/sdram.S @@ -37,6 +37,10 @@ ENTRY(ecovec24_sdram_enter_end) .balign 4 ENTRY(ecovec24_sdram_leave_start) + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_RSTANDBY, r0 + bf resume_rstandby + /* DBSC: put memory in auto-refresh mode */ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ @@ -49,4 +53,59 @@ ENTRY(ecovec24_sdram_leave_start) rts nop +resume_rstandby: + + /* DBSC: re-initialize and put in auto-refresh */ + + ED 0xFD000108, 0x00000181 /* DBPDCNT0 */ + ED 0xFD000020, 0x015B0002 /* DBCONF */ + ED 0xFD000030, 0x03071502 /* DBTR0 */ + ED 0xFD000034, 0x02020102 /* DBTR1 */ + ED 0xFD000038, 0x01090405 /* DBTR2 */ + ED 0xFD00003C, 0x00000002 /* DBTR3 */ + ED 0xFD000008, 0x00000005 /* DBKIND */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000018, 0x00000001 /* DBCKECNT */ + + mov #100,r0 +WAIT_400NS: + dt r0 + bf WAIT_400NS + + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */ + ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */ + ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */ + ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */ + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */ + ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */ + ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */ + + mov #100,r0 +WAIT_400NS_2: + dt r0 + bf WAIT_400NS_2 + + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000044, 0x0000050f /* DBRFPDN1 */ + ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */ + + mov.l DUMMY,r0 + mov.l @r0, r1 /* force single dummy read */ + + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000108, 0x00000080 /* DBPDCNT0 */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + + .balign 4 +DUMMY: .long 0xac400000 + ENTRY(ecovec24_sdram_leave_end) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 5c246289b4f..39ed8722d11 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -64,18 +64,16 @@ /* Heartbeat */ static unsigned char led_pos[] = { 0, 1, 2, 3 }; + static struct heartbeat_data heartbeat_data = { - .regsize = 8, .nr_bits = 4, .bit_pos = led_pos, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = 0xA405012C, /* PTG */ - .end = 0xA405012E - 1, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = 0xA405012C, /* PTG */ + .end = 0xA405012E - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }; static struct platform_device heartbeat_device = { @@ -84,8 +82,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* MTD */ @@ -455,7 +453,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; @@ -491,7 +489,7 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 24, + .start = 23, .flags = IORESOURCE_IRQ, }, }; @@ -698,13 +696,13 @@ static struct platform_device camera_devices[] = { #define FCLKBCR 0xa415000c static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -753,6 +751,26 @@ static struct platform_device fsi_device = { }, }; +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .name = "IrDA", + .start = 0xA45D0000, + .end = 0xA45D0049, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_sir", + .num_resources = ARRAY_SIZE(irda_resources), + .resource = irda_resources, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -773,8 +791,10 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[1], &camera_devices[2], &fsi_device, + &irda_device, }; +#ifdef CONFIG_I2C #define EEPROM_ADDR 0x50 static u8 mac_read(struct i2c_adapter *a, u8 command) { @@ -817,6 +837,12 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) msleep(10); } } +#else +static void __init sh_eth_init(struct sh_eth_plat_data *pd) +{ + pr_err("unable to read sh_eth MAC address\n"); +} +#endif #define PORT_HIZA 0xA4050158 #define IODRIVEA 0xA405018A @@ -831,7 +857,8 @@ static int __init arch_setup(void) struct clk *clk; /* register board specific self-refresh code */ - sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | + SUSP_SH_RSTANDBY, &ecovec24_sdram_enter_start, &ecovec24_sdram_enter_end, &ecovec24_sdram_leave_start, @@ -855,7 +882,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTG1, 0); gpio_direction_output(GPIO_PTG2, 0); gpio_direction_output(GPIO_PTG3, 0); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); /* enable SH-Eth */ gpio_request(GPIO_PTA1, NULL); @@ -875,16 +902,16 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LNKSTA, NULL); /* enable USB */ - ctrl_outw(0x0000, 0xA4D80000); - ctrl_outw(0x0000, 0xA4D90000); + __raw_writew(0x0000, 0xA4D80000); + __raw_writew(0x0000, 0xA4D90000); gpio_request(GPIO_PTB3, NULL); gpio_request(GPIO_PTB4, NULL); gpio_request(GPIO_PTB5, NULL); gpio_direction_input(GPIO_PTB3); gpio_direction_output(GPIO_PTB4, 0); gpio_direction_output(GPIO_PTB5, 0); - ctrl_outw(0x0600, 0xa40501d4); - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa4050192); if (gpio_get_value(GPIO_PTB3)) { printk(KERN_INFO "USB1 function is selected\n"); @@ -925,7 +952,7 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LCDVSYN, NULL); gpio_request(GPIO_FN_LCDDON, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); gpio_request(GPIO_PTE6, NULL); gpio_request(GPIO_PTU1, NULL); @@ -937,7 +964,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTA2, 0); /* I/O buffer drive ability is high */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ @@ -1069,7 +1096,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTB7, 0); /* I/O buffer drive ability is high for SDHI1 */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1107,6 +1134,11 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_FSIOBLRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOBO, NULL); + /* set SPU2 clock to 83.4 MHz */ + clk = clk_get(NULL, "spu_clk"); + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); clk_register(&fsimckb_clk); @@ -1123,6 +1155,17 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_INTC_IRQ1, NULL); gpio_direction_input(GPIO_FN_INTC_IRQ1); + /* set VPU clock to 166 MHz */ + clk = clk_get(NULL, "vpu_clk"); + clk_set_rate(clk, clk_round_rate(clk, 166000000)); + clk_put(clk); + + /* enable IrDA */ + gpio_request(GPIO_FN_IRDA_OUT, NULL); + gpio_request(GPIO_FN_IRDA_IN, NULL); + gpio_request(GPIO_PTU5, NULL); + gpio_direction_output(GPIO_PTU5, 0); + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); |