diff options
Diffstat (limited to 'arch/sh/boards/renesas')
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/Kconfig | 14 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/Makefile | 6 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/io.c | 338 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/irq.c | 123 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/led.c | 45 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/setup.c | 164 |
6 files changed, 690 insertions, 0 deletions
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig new file mode 100644 index 00000000000..c26d9813d23 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/Kconfig @@ -0,0 +1,14 @@ +if SH_R7780RP + +menu "R7780RP options" + +config SH_R7780MP + bool "R7780MP board support" + default y + help + Selecting this option will enable support for the mass-production + version of the R7780RP. If in doubt, say Y. + +endmenu + +endif diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile new file mode 100644 index 00000000000..f1776d02797 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the R7780RP-1 specific parts of the kernel +# + +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c new file mode 100644 index 00000000000..f73ca3f0f5a --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -0,0 +1,338 @@ +/* + * linux/arch/sh/kernel/io_r7780rp.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Renesas Solutions Highlander R7780RP-1 + * + * Initial version only to support LAN access; some + * placeholder code from io_r7780rp.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/r7780rp/r7780rp.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +#include <linux/module.h> +#include <linux/pci.h> +#include "../../../drivers/pci/pci-sh7780.h" + +/* + * The 7780 R7780RP-1 uses the built-in PCI controller (PCIC) + * of the 7780 processor, and has a SuperIO accessible via the PCI. + * The board also includes a PCMCIA controller on its memory bus, + * like the other Solution Engine boards. + */ + +#define SH7780_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ +#define PCIIOBR (volatile long *)PCI_REG(SH7780_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7780_PCIMBR) +#define PCI_IO_AREA SH7780_PCI_IO_BASE +#define PCI_MEM_AREA SH7780_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7780_PCIIOBR_MASK)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline unsigned long port2adr(unsigned int port) +{ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + if (port == 0x3f6) + return (PA_AREA5_IO + 0x80c); + else + return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); + else + maybebadio((unsigned long)port); + + return port; +} + +static inline unsigned long port88796l(unsigned int port, int flag) +{ + unsigned long addr; + + if (flag) + addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); + else + addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; + + return addr; +} + +/* The 7780 R7780RP-1 seems to have everything hooked */ +/* up pretty normally (nothing on high-bytes only...) so this */ +/* shouldn't be needed */ +static inline int shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7780_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7780_PCI_IO_SIZE))) +#else +#define CHECK_SH7780_PCIIO(port) (0) +#endif + +#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) +#define CHECK_AX88796L_PORT(port) \ + ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) +#else +#define CHECK_AX88796L_PORT(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +u8 r7780rp_inb(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + return ctrl_inw(port88796l(port, 0)) & 0xff; + else if (PXSEG(port)) + return ctrl_inb(port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + return ctrl_inb(PCI_IOMAP(port)); + + return ctrl_inw(port2adr(port)) & 0xff; +} + +u8 r7780rp_inb_p(unsigned long port) +{ + u8 v; + + if (CHECK_AX88796L_PORT(port)) + v = ctrl_inw(port88796l(port, 0)) & 0xff; + else if (PXSEG(port)) + v = ctrl_inb(port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + v = ctrl_inb(PCI_IOMAP(port)); + else + v = ctrl_inw(port2adr(port)) & 0xff; + + delay(); + + return v; +} + +u16 r7780rp_inw(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + return ctrl_inw(port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + return ctrl_inw(PCI_IOMAP(port)); + else + maybebadio(port); + + return 0; +} + +u32 r7780rp_inl(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + return ctrl_inl(port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + return ctrl_inl(PCI_IOMAP(port)); + else + maybebadio(port); + + return 0; +} + +void r7780rp_outb(u8 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + ctrl_outw(value, port88796l(port, 0)); + else if (PXSEG(port)) + ctrl_outb(value, port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + ctrl_outb(value, PCI_IOMAP(port)); + else + ctrl_outw(value, port2adr(port)); +} + +void r7780rp_outb_p(u8 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + ctrl_outw(value, port88796l(port, 0)); + else if (PXSEG(port)) + ctrl_outb(value, port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + ctrl_outb(value, PCI_IOMAP(port)); + else + ctrl_outw(value, port2adr(port)); + + delay(); +} + +void r7780rp_outw(u16 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + ctrl_outw(value, port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + ctrl_outw(value, PCI_IOMAP(port)); + else + maybebadio(port); +} + +void r7780rp_outl(u32 value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (PXSEG(port)) + ctrl_outl(value, port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + ctrl_outl(value, PCI_IOMAP(port)); + else + maybebadio(port); +} + +void r7780rp_insb(unsigned long port, void *dst, unsigned long count) +{ + volatile u16 *p; + u8 *buf = dst; + + if (CHECK_AX88796L_PORT(port)) { + p = (volatile u16 *)port88796l(port, 0); + while (count--) + *buf++ = *p & 0xff; + } else if (PXSEG(port)) { + while (count--) + *buf++ = *(volatile u8 *)port; + } else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + + while (count--) + *buf++ = *bp; + } else { + p = (volatile u16 *)port2adr(port); + while (count--) + *buf++ = *p & 0xff; + } +} + +void r7780rp_insw(unsigned long port, void *dst, unsigned long count) +{ + volatile u16 *p; + u16 *buf = dst; + + if (CHECK_AX88796L_PORT(port)) + p = (volatile u16 *)port88796l(port, 1); + else if (PXSEG(port)) + p = (volatile u16 *)port; + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + p = (volatile u16 *)PCI_IOMAP(port); + else + p = (volatile u16 *)port2adr(port); + + while (count--) + *buf++ = *p; +} + +void r7780rp_insl(unsigned long port, void *dst, unsigned long count) +{ + u32 *buf = dst; + + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + + while (count--) + *buf++ = *p; + } else + maybebadio(port); +} + +void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) +{ + volatile u16 *p; + const u8 *buf = src; + + if (CHECK_AX88796L_PORT(port)) { + p = (volatile u16 *)port88796l(port, 0); + while (count--) + *p = *buf++; + } else if (PXSEG(port)) + while (count--) + ctrl_outb(*buf++, port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + + while (count--) + *bp = *buf++; + } else { + p = (volatile u16 *)port2adr(port); + while (count--) + *p = *buf++; + } +} + +void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) +{ + volatile u16 *p; + const u16 *buf = src; + + if (CHECK_AX88796L_PORT(port)) + p = (volatile u16 *)port88796l(port, 1); + else if (PXSEG(port)) + p = (volatile u16 *)port; + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + p = (volatile u16 *)PCI_IOMAP(port); + else + p = (volatile u16 *)port2adr(port); + + while (count--) + *p = *buf++; +} + +void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) +{ + const u32 *buf = src; + + if (CHECK_AX88796L_PORT(port)) + maybebadio(port); + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + + while (count--) + *p = *buf++; + } else + maybebadio(port); +} + +void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) +{ + if (CHECK_AX88796L_PORT(port)) + return (void __iomem *)port88796l(port, size > 1); + else if (PXSEG(port)) + return (void __iomem *)port; + else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) + return (void __iomem *)PCI_IOMAP(port); + + return (void __iomem *)port2adr(port); +} diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c new file mode 100644 index 00000000000..c7b9fe6e640 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -0,0 +1,123 @@ +/* + * linux/arch/sh/boards/renesas/r7780rp/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Solutions Highlander R7780RP-1 Support. + * + * Modified for R7780RP-1 by + * Atom Create Engineering Co., Ltd. 2002. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/r7780rp/r7780rp.h> + +#ifdef CONFIG_SH_R7780MP +static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; +#else +static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; +#endif + +static void enable_r7780rp_irq(unsigned int irq); +static void disable_r7780rp_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_r7780rp_irq disable_r7780rp_irq + +static void ack_r7780rp_irq(unsigned int irq); +static void end_r7780rp_irq(unsigned int irq); + +static unsigned int startup_r7780rp_irq(unsigned int irq) +{ + enable_r7780rp_irq(irq); + return 0; /* never anything pending */ +} + +static void disable_r7780rp_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short val; + unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); + + /* Set the priority in IPR to 0 */ + local_irq_save(flags); + val = ctrl_inw(IRLCNTR1); + val &= mask; + ctrl_outw(val, IRLCNTR1); + local_irq_restore(flags); +} + +static void enable_r7780rp_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short val; + unsigned short value = (0x0001 << mask_pos[irq]); + + /* Set priority in IPR back to original value */ + local_irq_save(flags); + val = ctrl_inw(IRLCNTR1); + val |= value; + ctrl_outw(val, IRLCNTR1); + local_irq_restore(flags); +} + +static void ack_r7780rp_irq(unsigned int irq) +{ + disable_r7780rp_irq(irq); +} + +static void end_r7780rp_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_r7780rp_irq(irq); +} + +static struct hw_interrupt_type r7780rp_irq_type = { + .typename = "R7780RP-IRQ", + .startup = startup_r7780rp_irq, + .shutdown = shutdown_r7780rp_irq, + .enable = enable_r7780rp_irq, + .disable = disable_r7780rp_irq, + .ack = ack_r7780rp_irq, + .end = end_r7780rp_irq, +}; + +static void make_r7780rp_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &r7780rp_irq_type; + disable_r7780rp_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_r7780rp_IRQ(void) +{ + int i; + + /* IRL0=PCI Slot #A + * IRL1=PCI Slot #B + * IRL2=PCI Slot #C + * IRL3=PCI Slot #D + * IRL4=CF Card + * IRL5=CF Card Insert + * IRL6=M66596 + * IRL7=SD Card + * IRL8=Touch Panel + * IRL9=SCI + * IRL10=Serial + * IRL11=Extention #A + * IRL11=Extention #B + * IRL12=Debug LAN + * IRL13=Push Switch + * IRL14=ZiggBee IO + */ + + for (i=0; i<15; i++) + make_r7780rp_irq(i); +} diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c new file mode 100644 index 00000000000..9f02766b6f5 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/led.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) Atom Create Engineering Co., Ltd. + * + * May be copied or modified under the terms of GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/r7780rp/r7780rp.h> + +/* Cycle the LED's in the clasic Knightriger/Sun pattern */ +void heartbeat_r7780rp(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *)PA_OBLED; + static unsigned bit = 0, up = 1; + unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7}; + + cnt += 1; + if (cnt < period) + return; + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 + */ + period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); + + *p = 1 << bit_pos[bit]; + if (up) + if (bit == 7) { + bit--; + up = 0; + } else + bit++; + else if (bit == 0) + up = 1; + else + bit--; +} diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c new file mode 100644 index 00000000000..0e4d5e1b541 --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -0,0 +1,164 @@ +/* + * arch/sh/boards/renesas/r7780rp/setup.c + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005, 2006 Paul Mundt + * + * Renesas Solutions Highlander R7780RP-1 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/r7780rp/r7780rp.h> +#include <asm/clock.h> +#include <asm/io.h> + +extern void heartbeat_r7780rp(void); +extern void init_r7780rp_IRQ(void); + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_r7780rp __initmv = { + .mv_nr_irqs = 109, + + .mv_inb = r7780rp_inb, + .mv_inw = r7780rp_inw, + .mv_inl = r7780rp_inl, + .mv_outb = r7780rp_outb, + .mv_outw = r7780rp_outw, + .mv_outl = r7780rp_outl, + + .mv_inb_p = r7780rp_inb_p, + .mv_inw_p = r7780rp_inw, + .mv_inl_p = r7780rp_inl, + .mv_outb_p = r7780rp_outb_p, + .mv_outw_p = r7780rp_outw, + .mv_outl_p = r7780rp_outl, + + .mv_insb = r7780rp_insb, + .mv_insw = r7780rp_insw, + .mv_insl = r7780rp_insl, + .mv_outsb = r7780rp_outsb, + .mv_outsw = r7780rp_outsw, + .mv_outsl = r7780rp_outsl, + + .mv_ioport_map = r7780rp_ioport_map, + .mv_init_irq = init_r7780rp_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_r7780rp, +#endif +}; +ALIAS_MV(r7780rp) + +static struct resource m66596_usb_host_resources[] = { + [0] = { + .start = 0xa4800000, + .end = 0xa4ffffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 6, /* irq number */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66596_usb_host_device = { + .name = "m66596-hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(m66596_usb_host_resources), + .resource = m66596_usb_host_resources, +}; + +static struct platform_device *r7780rp_devices[] __initdata = { + &m66596_usb_host_device, +}; + +static int __init r7780rp_devices_setup(void) +{ + return platform_add_devices(r7780rp_devices, + ARRAY_SIZE(r7780rp_devices)); +} +__initcall(r7780rp_devices_setup); + +/* + * Platform specific clocks + */ +static void ivdr_clk_enable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL); +} + +static void ivdr_clk_disable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL); +} + +static struct clk_ops ivdr_clk_ops = { + .enable = ivdr_clk_enable, + .disable = ivdr_clk_disable, +}; + +static struct clk ivdr_clk = { + .name = "ivdr_clk", + .ops = &ivdr_clk_ops, +}; + +static struct clk *r7780rp_clocks[] = { + &ivdr_clk, +}; + +const char *get_system_type(void) +{ + return "Highlander R7780RP-1"; +} + +static void r7780rp_power_off(void) +{ +#ifdef CONFIG_SH_R7780MP + ctrl_outw(0x0001, PA_POFF); +#endif +} + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + u16 ver = ctrl_inw(PA_VERREG); + int i; + + printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n"); + + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d)\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf); + + /* + * Enable the important clocks right away.. + */ + for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { + struct clk *clk = r7780rp_clocks[i]; + + clk_register(clk); + clk_enable(clk); + } + + ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ +#ifndef CONFIG_SH_R7780MP + ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ +#endif + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */ + + pm_power_off = r7780rp_power_off; +} |