aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/drivers/pci/pci-sh7751.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers/pci/pci-sh7751.c')
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.c216
1 files changed, 100 insertions, 116 deletions
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 3065eb184f0..c4fa0bb1397 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -1,88 +1,99 @@
/*
- * Low-Level PCI Support for the SH7751
+ * Low-Level PCI Support for the SH7751
*
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2003 - 2009 Paul Mundt
+ * Copyright (C) 2001 Dustin McIntire
*
- * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- * With cleanup by Paul van Gool <pvangool@mimotech.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
+ * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-#undef DEBUG
-
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/io.h>
#include "pci-sh4.h"
#include <asm/addrspace.h>
-#include <asm/io.h>
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
-static int __init sh7751_pci_init(void)
+static int __init __area_sdram_check(struct pci_channel *chan,
+ unsigned int area)
{
- unsigned int id;
- int ret;
-
- pr_debug("PCI: Starting intialization.\n");
+ unsigned long word;
- /* check for SH7751/SH7751R hardware */
- id = pci_read_reg(SH7751_PCICONF0);
- if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
- id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
- pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
- return -ENODEV;
- }
-
- if ((ret = sh4_pci_check_direct()) != 0)
- return ret;
-
- return pcibios_init_platform();
-}
-subsys_initcall(sh7751_pci_init);
-
-static int __init __area_sdram_check(unsigned int area)
-{
- u32 word;
-
- word = ctrl_inl(SH7751_BCR1);
+ word = __raw_readl(SH7751_BCR1);
/* check BCR for SDRAM in area */
if (((word >> area) & 1) == 0) {
- printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
+ printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
area, word);
return 0;
}
- pci_write_reg(word, SH4_PCIBCR1);
+ pci_write_reg(chan, word, SH4_PCIBCR1);
- word = (u16)ctrl_inw(SH7751_BCR2);
+ word = __raw_readw(SH7751_BCR2);
/* check BCR2 for 32bit SDRAM interface*/
if (((word >> (area << 1)) & 0x3) != 0x3) {
- printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
+ printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
area, word);
return 0;
}
- pci_write_reg(word, SH4_PCIBCR2);
+ pci_write_reg(chan, word, SH4_PCIBCR2);
return 1;
}
-int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
+static struct resource sh7751_io_resource = {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7785_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_channel sh7751_pci_controller = {
+ .pci_ops = &sh4_pci_ops,
+ .mem_resource = &sh7751_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh7751_io_resource,
+ .io_offset = 0x00000000,
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS3_BASE_ADDR,
+ .size = 0x04000000,
+ },
+};
+
+static int __init sh7751_pci_init(void)
{
- u32 reg;
- u32 word;
+ struct pci_channel *chan = &sh7751_pci_controller;
+ unsigned int id;
+ u32 word, reg;
+ int ret;
+
+ printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+ chan->reg_base = 0xfe200000;
+
+ /* check for SH7751/SH7751R hardware */
+ id = pci_read_reg(chan, SH7751_PCICONF0);
+ if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+ id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+ pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+ return -ENODEV;
+ }
+
+ if ((ret = sh4_pci_check_direct(chan)) != 0)
+ return ret;
/* Set the BCR's to enable PCI access */
reg = ctrl_inl(SH7751_BCR1);
@@ -90,25 +101,10 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
ctrl_outl(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
- pci_write_reg(0, SH4_PCICLKR);
+ pci_write_reg(chan, 0, SH4_PCICLKR);
/* Clear Powerdown IRQ's (not done in reset) */
word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
- pci_write_reg(word, SH4_PCIPINT);
-
- /*
- * This code is unused for some boards as it is done in the
- * bootloader and doing it here means the MAC addresses loaded
- * by the bootloader get lost.
- */
- if (!(map->flags & SH4_PCIC_NO_RESET)) {
- /* toggle PCI reset pin */
- word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
- pci_write_reg(word, SH4_PCICR);
- /* Wait for a long time... not 1 sec. but long enough */
- mdelay(100);
- word = SH4_PCICR_PREFIX;
- pci_write_reg(word, SH4_PCICR);
- }
+ pci_write_reg(chan, word, SH4_PCIPINT);
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
@@ -116,89 +112,77 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
*/
word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- pci_write_reg(word, SH7751_PCICONF1);
+ pci_write_reg(chan, word, SH7751_PCICONF1);
/* define this host as the host bridge */
word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(word, SH7751_PCICONF2);
+ pci_write_reg(chan, word, SH7751_PCICONF2);
/* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
- * Window0 = map->window0.size @ non-cached area base = SDRAM
- * Window1 = map->window1.size @ cached area base = SDRAM
*/
- word = map->window0.size - 1;
- pci_write_reg(word, SH4_PCILSR0);
- word = map->window1.size - 1;
- pci_write_reg(word, SH4_PCILSR1);
+ word = sh7751_pci_map.window0.size - 1;
+ pci_write_reg(chan, word, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
- word = P2SEGADDR(map->window0.base);
- pci_write_reg(word, SH4_PCILAR0);
- pci_write_reg(word, SH7751_PCICONF5);
- /* Set the values on window 1 PCI config registers */
- word = PHYSADDR(map->window1.base);
- pci_write_reg(word, SH4_PCILAR1);
- pci_write_reg(word, SH7751_PCICONF6);
+ word = P2SEGADDR(sh7751_pci_map.window0.base);
+ pci_write_reg(chan, word, SH4_PCILAR0);
+ pci_write_reg(chan, word, SH7751_PCICONF5);
/* Set the local 16MB PCI memory space window to
* the lowest PCI mapped address
*/
- word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
+ word = chan->mem_resource->start & SH4_PCIMBR_MASK;
pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
- pci_write_reg(word , SH4_PCIMBR);
-
- /* Map IO space into PCI IO window
- * The IO window is 64K-PCIBIOS_MIN_IO in size
- * IO addresses will be translated to the
- * PCI IO window base address
- */
- pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
- PCIBIOS_MIN_IO, (64 << 10),
- SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
+ pci_write_reg(chan, word , SH4_PCIMBR);
/* Make sure the MSB's of IO window are set to access PCI space
* correctly */
- word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
+ word = chan->io_resource->start & SH4_PCIIOBR_MASK;
pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
- pci_write_reg(word, SH4_PCIIOBR);
+ pci_write_reg(chan, word, SH4_PCIIOBR);
/* Set PCI WCRx, BCRx's, copy from BSC locations */
/* check BCR for SDRAM in specified area */
- switch (map->window0.base) {
- case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break;
- case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break;
- case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break;
- case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break;
- case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break;
- case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
- case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
+ switch (sh7751_pci_map.window0.base) {
+ case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
+ case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
+ case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
+ case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
+ case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
+ case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
+ case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
}
if (!word)
- return 0;
+ return -1;
/* configure the wait control registers */
word = ctrl_inl(SH7751_WCR1);
- pci_write_reg(word, SH4_PCIWCR1);
+ pci_write_reg(chan, word, SH4_PCIWCR1);
word = ctrl_inl(SH7751_WCR2);
- pci_write_reg(word, SH4_PCIWCR2);
+ pci_write_reg(chan, word, SH4_PCIWCR2);
word = ctrl_inl(SH7751_WCR3);
- pci_write_reg(word, SH4_PCIWCR3);
+ pci_write_reg(chan, word, SH4_PCIWCR3);
word = ctrl_inl(SH7751_MCR);
- pci_write_reg(word, SH4_PCIMCR);
+ pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
* TODO: add support for the internal error interrupts and
* DMA interrupts...
*/
- pci_fixup_pcic();
+ pci_fixup_pcic(chan);
/* SH7751 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
- pci_write_reg(word, SH4_PCICR);
+ pci_write_reg(chan, word, SH4_PCICR);
- return 1;
+ __set_io_port_base(SH7751_PCI_IO_BASE);
+
+ register_pci_controller(chan);
+
+ return 0;
}
+arch_initcall(sh7751_pci_init);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 03:52:29 +0000