diff options
Diffstat (limited to 'arch/sh/kernel/cf-enabler.c')
| -rw-r--r-- | arch/sh/kernel/cf-enabler.c | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c new file mode 100644 index 00000000000..7a3b18faa27 --- /dev/null +++ b/arch/sh/kernel/cf-enabler.c @@ -0,0 +1,158 @@ +/* $Id: cf-enabler.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $ + * + * linux/drivers/block/cf-enabler.c + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000 Toshiharu Nozawa + * Copyright (C) 2001 A&D Co., Ltd. + * + * Enable the CF configuration. + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/irq.h> + +/* + * You can connect Compact Flash directly to the bus of SuperH. + * This is the enabler for that. + * + * SIM: How generic is this really? It looks pretty board, or at + * least SH sub-type, specific to me. + * I know it doesn't work on the Overdrive! + */ + +/* + * 0xB8000000 : Attribute + * 0xB8001000 : Common Memory + * 0xBA000000 : I/O + */ +#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4) +/* SH4 can't access PCMCIA interface through P2 area. + * we must remap it with appropreate attribute bit of the page set. + * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */ +#include <linux/mm.h> +#include <linux/vmalloc.h> + +#if defined(CONFIG_CF_AREA6) +#define slot_no 0 +#else +#define slot_no 1 +#endif + +/* defined in mm/ioremap.c */ +extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); + +/* use this pointer to access to directly connected compact flash io area*/ +void *cf_io_base; + +static int __init allocate_cf_area(void) +{ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void*)CONFIG_CF_BASE_ADDR); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(slot_no, _PAGE_PCC_IO16); + cf_io_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!cf_io_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } +/* printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n", + paddrbase, psize, prot.pgprot, cf_io_base);*/ + + /* XXX : do we need attribute and common-memory area also? */ + + return 0; +} +#endif + +static int __init cf_init_default(void) +{ +/* You must have enabled the card, and set the level interrupt + * before reaching this point. Possibly in boot ROM or boot loader. + */ +#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4) + allocate_cf_area(); +#endif +#if defined(CONFIG_SH_UNKNOWN) + /* This should be done in each board's init_xxx_irq. */ + make_imask_irq(14); + disable_irq(14); +#endif + return 0; +} + +#if defined(CONFIG_SH_SOLUTION_ENGINE) +#include <asm/se/se.h> + +/* + * SolutionEngine + * + * 0xB8400000 : Common Memory + * 0xB8500000 : Attribute + * 0xB8600000 : I/O + */ + +static int __init cf_init_se(void) +{ + if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0) + return 0; /* Not detected */ + + if ((ctrl_inw(MRSHPC_CSR) & 0x0080) == 0) { + ctrl_outw(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */ + } else { + ctrl_outw(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */ + } + + /* + * PC-Card window open + * flag == COMMON/ATTRIBUTE/IO + */ + /* common window open */ + ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */ + if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) + /* common mode & bus width 16bit SWAP = 1*/ + ctrl_outw(0x0b00, MRSHPC_MW0CR2); + else + /* common mode & bus width 16bit SWAP = 0*/ + ctrl_outw(0x0300, MRSHPC_MW0CR2); + + /* attribute window open */ + ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */ + if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) + /* attribute mode & bus width 16bit SWAP = 1*/ + ctrl_outw(0x0a00, MRSHPC_MW1CR2); + else + /* attribute mode & bus width 16bit SWAP = 0*/ + ctrl_outw(0x0200, MRSHPC_MW1CR2); + + /* I/O window open */ + ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */ + ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */ + if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) + ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/ + else + ctrl_outw(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/ + + ctrl_outw(0x2000, MRSHPC_ICR); + ctrl_outb(0x00, PA_MRSHPC_MW2 + 0x206); + ctrl_outb(0x42, PA_MRSHPC_MW2 + 0x200); + return 0; +} +#endif + +int __init cf_init(void) +{ +#if defined(CONFIG_SH_SOLUTION_ENGINE) + if (MACH_SE) + return cf_init_se(); +#endif + return cf_init_default(); +} + +__initcall (cf_init); |