aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/cpu/cpufreq/gx-suspmod.c')
-rw-r--r--arch/x86/kernel/cpu/cpufreq/gx-suspmod.c105
1 files changed, 65 insertions, 40 deletions
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index 9d9eae82e60..ac27ec2264d 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -79,8 +79,9 @@
#include <linux/smp.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
+#include <linux/errno.h>
+
#include <asm/processor-cyrix.h>
-#include <asm/errno.h>
/* PCI config registers, all at F0 */
#define PCI_PMER1 0x80 /* power management enable register 1 */
@@ -122,8 +123,8 @@ static struct gxfreq_params *gx_params;
static int stock_freq;
/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
-static int pci_busclk = 0;
-module_param (pci_busclk, int, 0444);
+static int pci_busclk;
+module_param(pci_busclk, int, 0444);
/* maximum duration for which the cpu may be suspended
* (32us * MAX_DURATION). If no parameter is given, this defaults
@@ -132,7 +133,7 @@ module_param (pci_busclk, int, 0444);
* is suspended -- processing power is just 0.39% of what it used to be,
* though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
static int max_duration = 255;
-module_param (max_duration, int, 0444);
+module_param(max_duration, int, 0444);
/* For the default policy, we want at least some processing power
* - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
@@ -140,7 +141,8 @@ module_param (max_duration, int, 0444);
#define POLICY_MIN_DIV 20
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+ "gx-suspmod", msg)
/**
* we can detect a core multipiler from dir0_lsb
@@ -166,12 +168,20 @@ static int gx_freq_mult[16] = {
* Low Level chipset interface *
****************************************************************/
static struct pci_device_id gx_chipset_tbl[] __initdata = {
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510,
+ PCI_ANY_ID, PCI_ANY_ID },
{ 0, },
};
+static void gx_write_byte(int reg, int value)
+{
+ pci_write_config_byte(gx_params->cs55x0, reg, value);
+}
+
/**
* gx_detect_chipset:
*
@@ -200,7 +210,8 @@ static __init struct pci_dev *gx_detect_chipset(void)
/**
* gx_get_cpuspeed:
*
- * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
+ * Geode CPU runs.
*/
static unsigned int gx_get_cpuspeed(unsigned int cpu)
{
@@ -217,17 +228,18 @@ static unsigned int gx_get_cpuspeed(unsigned int cpu)
*
**/
-static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
+ u8 *off_duration)
{
unsigned int i;
u8 tmp_on, tmp_off;
int old_tmp_freq = stock_freq;
int tmp_freq;
- *off_duration=1;
- *on_duration=0;
+ *off_duration = 1;
+ *on_duration = 0;
- for (i=max_duration; i>0; i--) {
+ for (i = max_duration; i > 0; i--) {
tmp_off = ((khz * i) / stock_freq) & 0xff;
tmp_on = i - tmp_off;
tmp_freq = (stock_freq * tmp_off) / i;
@@ -259,26 +271,34 @@ static void gx_set_cpuspeed(unsigned int khz)
freqs.cpu = 0;
freqs.old = gx_get_cpuspeed(0);
- new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration);
+ new_khz = gx_validate_speed(khz, &gx_params->on_duration,
+ &gx_params->off_duration);
freqs.new = new_khz;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
local_irq_save(flags);
- if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */
+
+
+ if (new_khz != stock_freq) {
+ /* if new khz == 100% of CPU speed, it is special case */
switch (gx_params->cs55x0->device) {
case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
/* FIXME: need to test other values -- Zwane,Miura */
- pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
- pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
- pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
-
- if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */
- suscfg = gx_params->pci_suscfg | SUSMOD;
- } else { /* CS5530A,B.. */
- suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+ /* typical 2 to 4ms */
+ gx_write_byte(PCI_IRQTC, 4);
+ /* typical 50 to 100ms */
+ gx_write_byte(PCI_VIDTC, 100);
+ gx_write_byte(PCI_PMER1, pmer1);
+
+ if (gx_params->cs55x0->revision < 0x10) {
+ /* CS5530(rev 1.2, 1.3) */
+ suscfg = gx_params->pci_suscfg|SUSMOD;
+ } else {
+ /* CS5530A,B.. */
+ suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
}
break;
case PCI_DEVICE_ID_CYRIX_5520:
@@ -294,13 +314,13 @@ static void gx_set_cpuspeed(unsigned int khz)
suscfg = gx_params->pci_suscfg & ~(SUSMOD);
gx_params->off_duration = 0;
gx_params->on_duration = 0;
- dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+ dprintk("suspend modulation disabled: cpu runs 100%% speed.\n");
}
- pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
- pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+ gx_write_byte(PCI_MODOFF, gx_params->off_duration);
+ gx_write_byte(PCI_MODON, gx_params->on_duration);
- pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+ gx_write_byte(PCI_SUSCFG, suscfg);
pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
local_irq_restore(flags);
@@ -334,7 +354,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
return -EINVAL;
policy->cpu = 0;
- cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+ cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+ stock_freq);
/* it needs to be assured that at least one supported frequency is
* within policy->min and policy->max. If it is not, policy->max
@@ -354,7 +375,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
policy->max = tmp_freq;
if (policy->max < policy->min)
policy->max = policy->min;
- cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+ cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+ stock_freq);
return 0;
}
@@ -398,18 +420,18 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
return -ENODEV;
/* determine maximum frequency */
- if (pci_busclk) {
+ if (pci_busclk)
maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
- } else if (cpu_khz) {
+ else if (cpu_khz)
maxfreq = cpu_khz;
- } else {
+ else
maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
- }
+
stock_freq = maxfreq;
curfreq = gx_get_cpuspeed(0);
dprintk("cpu max frequency is %d.\n", maxfreq);
- dprintk("cpu current frequency is %dkHz.\n",curfreq);
+ dprintk("cpu current frequency is %dkHz.\n", curfreq);
/* setup basic struct for cpufreq API */
policy->cpu = 0;
@@ -447,7 +469,8 @@ static int __init cpufreq_gx_init(void)
struct pci_dev *gx_pci;
/* Test if we have the right hardware */
- if ((gx_pci = gx_detect_chipset()) == NULL)
+ gx_pci = gx_detect_chipset();
+ if (gx_pci == NULL)
return -ENODEV;
/* check whether module parameters are sane */
@@ -468,9 +491,11 @@ static int __init cpufreq_gx_init(void)
pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
- pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+ pci_read_config_byte(params->cs55x0, PCI_MODOFF,
+ &(params->off_duration));
- if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
+ ret = cpufreq_register_driver(&gx_suspmod_driver);
+ if (ret) {
kfree(params);
return ret; /* register error! */
}
@@ -485,9 +510,9 @@ static void __exit cpufreq_gx_exit(void)
kfree(gx_params);
}
-MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
-MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE("GPL");
module_init(cpufreq_gx_init);
module_exit(cpufreq_gx_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 12:25:11 +0000