diff options
Diffstat (limited to 'arch/x86/kernel/cpu/cpufreq')
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/Kconfig (renamed from arch/x86/kernel/cpu/cpufreq/Kconfig_32) | 69 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/Kconfig_64 | 108 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 90 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 20 |
4 files changed, 76 insertions, 211 deletions
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 b/arch/x86/kernel/cpu/cpufreq/Kconfig index d8c6f132dc7..151eda0a23f 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -19,6 +19,9 @@ config X86_ACPI_CPUFREQ Processor Performance States. This driver also supports Intel Enhanced Speedstep. + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + For details, take a look at <file:Documentation/cpu-freq/>. If in doubt, say N. @@ -26,7 +29,7 @@ config X86_ACPI_CPUFREQ config ELAN_CPUFREQ tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE - depends on X86_ELAN + depends on X86_32 && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC400 and SC410 processors. @@ -42,7 +45,7 @@ config ELAN_CPUFREQ config SC520_CPUFREQ tristate "AMD Elan SC520" select CPU_FREQ_TABLE - depends on X86_ELAN + depends on X86_32 && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC520 processor. @@ -54,6 +57,7 @@ config SC520_CPUFREQ config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for mobile AMD K6-2+ and mobile AMD K6-3+ processors. @@ -65,6 +69,7 @@ config X86_POWERNOW_K6 config X86_POWERNOW_K7 tristate "AMD Mobile Athlon/Duron PowerNow!" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for mobile AMD K7 mobile processors. @@ -76,23 +81,27 @@ config X86_POWERNOW_K7_ACPI bool depends on X86_POWERNOW_K7 && ACPI_PROCESSOR depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + depends on X86_32 default y config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on EXPERIMENTAL help This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + For details, take a look at <file:Documentation/cpu-freq/>. If in doubt, say N. config X86_POWERNOW_K8_ACPI - bool "ACPI Support" - select ACPI_PROCESSOR - depends on ACPI && X86_POWERNOW_K8 + bool + prompt "ACPI Support" if X86_32 + depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) default y help This provides access to the K8s Processor Performance States via ACPI. @@ -104,7 +113,7 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI + depends on X86_32 && PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. @@ -114,15 +123,20 @@ config X86_GX_SUSPMOD If in doubt, say N. config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep" + tristate "Intel Enhanced SpeedStep (deprecated)" select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE + select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 + depends on X86_32 || (X86_64 && ACPI_PROCESSOR) help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, - you also need to say Y to "Use ACPI tables to decode..." below - [which might imply enabling ACPI] if you want to use this driver - on non-Banias CPUs. + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. For details, take a look at <file:Documentation/cpu-freq/>. @@ -130,7 +144,7 @@ config X86_SPEEDSTEP_CENTRINO config X86_SPEEDSTEP_CENTRINO_TABLE bool "Built-in tables for Banias CPUs" - depends on X86_SPEEDSTEP_CENTRINO + depends on X86_32 && X86_SPEEDSTEP_CENTRINO default y help Use built-in tables for Banias CPUs if ACPI encoding @@ -141,6 +155,7 @@ config X86_SPEEDSTEP_CENTRINO_TABLE config X86_SPEEDSTEP_ICH tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all @@ -154,7 +169,7 @@ config X86_SPEEDSTEP_ICH config X86_SPEEDSTEP_SMI tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" select CPU_FREQ_TABLE - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) @@ -169,15 +184,24 @@ config X86_P4_CLOCKMOD select CPU_FREQ_TABLE help This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. + Unless you are absolutely sure say N. config X86_CPUFREQ_NFORCE2 tristate "nVidia nForce2 FSB changing" - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for FSB changing on nVidia nForce2 platforms. @@ -188,6 +212,7 @@ config X86_CPUFREQ_NFORCE2 config X86_LONGRUN tristate "Transmeta LongRun" + depends on X86_32 help This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors which support LongRun. @@ -199,7 +224,7 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR + depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA Samuel/CyrixIII, VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T @@ -212,7 +237,7 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" select CPU_FREQ_TABLE - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for VIA C7 processors. @@ -233,11 +258,11 @@ config X86_ACPI_CPUFREQ_PROC_INTF config X86_SPEEDSTEP_LIB tristate - default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD + default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) config X86_SPEEDSTEP_RELAXED_CAP_CHECK bool "Relaxed speedstep capability checks" - depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) help Don't perform all checks for a speedstep capable system which would normally be done. Some ancient or strange systems, though speedstep diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 b/arch/x86/kernel/cpu/cpufreq/Kconfig_64 deleted file mode 100644 index 9c9699fdcf5..00000000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 +++ /dev/null @@ -1,108 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - depends on X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -comment "shared options" - -config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" - depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI - help - This enables the deprecated /proc/acpi/processor/../performance - interface. While it is helpful for debugging, the generic, - cross-architecture cpufreq interfaces should be used. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - depends on EMBEDDED - select CPU_FREQ_TABLE - help - This adds the clock modulation driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at <file:Documentation/cpu-freq/>. - - Unless you are absolutely sure say N. - - -config X86_SPEEDSTEP_LIB - tristate - default X86_P4_CLOCKMOD - -endif - -endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 9c36a53676b..99e1ef9939b 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -46,7 +46,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 2.00.00" +#define VERSION "version 2.20.00" #include "powernow-k8.h" /* serialize freq changes */ @@ -73,33 +73,11 @@ static u32 find_khz_freq_from_fid(u32 fid) return 1000 * find_freq_from_fid(fid); } -/* Return a frequency in MHz, given an input fid and did */ -static u32 find_freq_from_fiddid(u32 fid, u32 did) +static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate) { - if (current_cpu_data.x86 == 0x10) - return 100 * (fid + 0x10) >> did; - else - return 100 * (fid + 0x8) >> did; -} - -static u32 find_khz_freq_from_fiddid(u32 fid, u32 did) -{ - return 1000 * find_freq_from_fiddid(fid, did); -} - -static u32 find_fid_from_pstate(u32 pstate) -{ - u32 hi, lo; - rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); - return lo & HW_PSTATE_FID_MASK; + return data[pstate].frequency; } -static u32 find_did_from_pstate(u32 pstate) -{ - u32 hi, lo; - rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); - return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; -} /* Return the vco fid for an input fid * @@ -142,9 +120,7 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) if (cpu_family == CPU_HW_PSTATE) { rdmsr(MSR_PSTATE_STATUS, lo, hi); i = lo & HW_PSTATE_MASK; - rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi); - data->currfid = lo & HW_PSTATE_FID_MASK; - data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; + data->currpstate = i; return 0; } do { @@ -295,7 +271,7 @@ static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, static int transition_pstate(struct powernow_k8_data *data, u32 pstate) { wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currfid = find_fid_from_pstate(pstate); + data->currpstate = pstate; return 0; } @@ -845,17 +821,20 @@ err_out: static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) { int i; + u32 hi = 0, lo = 0; + rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo); + data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; for (i = 0; i < data->acpi_data.state_count; i++) { u32 index; u32 hi = 0, lo = 0; - u32 fid; - u32 did; index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > MAX_HW_PSTATE) { + if (index > data->max_hw_pstate) { printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; } rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); if (!(hi & HW_PSTATE_VALID_MASK)) { @@ -864,22 +843,9 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf continue; } - fid = lo & HW_PSTATE_FID_MASK; - did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; + powernow_table[i].index = index; - dprintk(" %d : fid 0x%x, did 0x%x\n", index, fid, did); - - powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT); - - powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did); - - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } + powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; } return 0; } @@ -1020,22 +986,18 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i /* Take a frequency, and issue the hardware pstate transition command */ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) { - u32 fid = 0; - u32 did = 0; u32 pstate = 0; int res, i; struct cpufreq_freqs freqs; dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - /* get fid did for hardware pstate transition */ + /* get MSR index for hardware pstate transition */ pstate = index & HW_PSTATE_MASK; - if (pstate > MAX_HW_PSTATE) + if (pstate > data->max_hw_pstate) return 0; - fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT; - did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT; - freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid); - freqs.new = find_khz_freq_from_fiddid(fid, did); + freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask(i, *(data->available_cores)) { freqs.cpu = i; @@ -1043,9 +1005,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i } res = transition_pstate(data, pstate); - data->currfid = find_fid_from_pstate(pstate); - data->currdid = find_did_from_pstate(pstate); - freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid); + freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask(i, *(data->available_cores)) { freqs.cpu = i; @@ -1090,10 +1050,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi if (query_current_values_with_pending_wait(data)) goto err_out; - if (cpu_family == CPU_HW_PSTATE) - dprintk("targ: curr fid 0x%x, did 0x%x\n", - data->currfid, data->currdid); - else { + if (cpu_family != CPU_HW_PSTATE) { dprintk("targ: curr fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1124,7 +1081,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi mutex_unlock(&fidvid_mutex); if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate); else pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -1223,7 +1180,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) + (3 * (1 << data->irt) * 10)) * 1000; if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); else pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); @@ -1240,8 +1197,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current fid 0x%x, did 0x%x\n", - data->currfid, data->currdid); + dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate); else dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1297,7 +1253,7 @@ static unsigned int powernowk8_get (unsigned int cpu) goto out; if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); + khz = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); else khz = find_khz_freq_from_fid(data->currfid); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index 7c4f6e0faed..afd2b520d35 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -10,6 +10,7 @@ struct powernow_k8_data { u32 numps; /* number of p-states */ u32 batps; /* number of p-states supported on battery */ + u32 max_hw_pstate; /* maximum legal hardware pstate */ /* these values are constant when the PSB is used to determine * vid/fid pairings, but are modified during the ->target() call @@ -21,8 +22,8 @@ struct powernow_k8_data { u32 plllock; /* pll lock time, units 1 us */ u32 exttype; /* extended interface = 1 */ - /* keep track of the current fid / vid or did */ - u32 currvid, currfid, currdid; + /* keep track of the current fid / vid or pstate */ + u32 currvid, currfid, currpstate; /* the powernow_table includes all frequency and vid/fid pairings: * fid are the lower 8 bits of the index, vid are the upper 8 bits. @@ -87,23 +88,14 @@ struct powernow_k8_data { /* Hardware Pstate _PSS and MSR definitions */ #define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_FID_MASK 0x0000003f -#define HW_PSTATE_DID_MASK 0x000001c0 -#define HW_PSTATE_DID_SHIFT 6 #define HW_PSTATE_MASK 0x00000007 #define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_FID_INDEX_SHIFT 8 -#define HW_FID_INDEX_MASK 0x0000ff00 -#define HW_DID_INDEX_SHIFT 16 -#define HW_DID_INDEX_MASK 0x00ff0000 -#define HW_WATTS_MASK 0xff -#define HW_PWR_DVR_MASK 0x300 -#define HW_PWR_DVR_SHIFT 8 -#define HW_PWR_MAX_MULT 3 -#define MAX_HW_PSTATE 8 /* hw pstate supports up to 8 */ +#define HW_PSTATE_MAX_MASK 0x000000f0 +#define HW_PSTATE_MAX_SHIFT 4 #define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ #define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ #define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ +#define MSR_PSTATE_CUR_LIMIT 0xc0010061 /* pstate current limit MSR */ /* define the two driver architectures */ #define CPU_OPTERON 0 |