diff options
Diffstat (limited to 'arch/x86/kernel')
182 files changed, 24298 insertions, 13872 deletions
diff --git a/arch/x86/kernel/.gitignore b/arch/x86/kernel/.gitignore index 4ea38a39aed..08f4fd73146 100644 --- a/arch/x86/kernel/.gitignore +++ b/arch/x86/kernel/.gitignore @@ -1,2 +1,3 @@ vsyscall.lds vsyscall_32.lds +vmlinux.lds diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b472..5098585f87c 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -2,10 +2,17 @@ # Makefile for the linux kernel. # -extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds +extra-y := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) +ifdef CONFIG_FTRACE +# Do not profile debug and lowlevel utilities +CFLAGS_REMOVE_tsc.o = -pg +CFLAGS_REMOVE_rtc.o = -pg +CFLAGS_REMOVE_paravirt-spinlocks.o = -pg +endif + # # vsyscalls (which work on the user stack) should have # no stack-protector checks: @@ -13,24 +20,25 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) nostackp := $(call cc-option, -fno-stack-protector) CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp) CFLAGS_hpet.o := $(nostackp) -CFLAGS_tsc_64.o := $(nostackp) +CFLAGS_tsc.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup.o i8259.o irqinit_$(BITS).o setup_percpu.o +obj-$(CONFIG_X86_VISWS) += visws_quirks.o +obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o -obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o -obj-y += bootflag.o e820_$(BITS).o +obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o +obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o -obj-$(CONFIG_X86_64) += bugs_64.o -obj-y += tsc_$(BITS).o io_delay.o rtc.o +obj-y += tsc.o io_delay.o rtc.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o -obj-y += i387.o +obj-y += i387.o xsave.o obj-y += ptrace.o obj-y += ds.o obj-$(CONFIG_X86_32) += tls.o @@ -43,7 +51,6 @@ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_PCI) += early-quirks.o apm-y := apm_32.o obj-$(CONFIG_APM) += apm.o @@ -53,18 +60,19 @@ obj-$(CONFIG_X86_32_SMP) += smpcommon.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o +obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o +obj-$(CONFIG_X86_ES7000) += es7000_32.o obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o obj-y += vsmp_64.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_MODULES) += module_$(BITS).o -obj-$(CONFIG_ACPI_SRAT) += srat_32.o obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_KGDB) += kgdb.o @@ -81,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o -obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o +obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o @@ -90,15 +99,24 @@ scx200-y += scx200_32.o obj-$(CONFIG_OLPC) += olpc.o +microcode-y := microcode_core.o +microcode-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o +microcode-$(CONFIG_MICROCODE_AMD) += microcode_amd.o +obj-$(CONFIG_MICROCODE) += microcode.o + ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) - obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o + obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o + obj-y += bios_uv.o + obj-y += genx2apic_cluster.o + obj-y += genx2apic_phys.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o + obj-$(CONFIG_AMD_IOMMU) += amd_iommu_init.o amd_iommu.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 33c5216fd3e..eb875cdc736 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -37,6 +37,7 @@ #include <asm/pgtable.h> #include <asm/io_apic.h> #include <asm/apic.h> +#include <asm/genapic.h> #include <asm/io.h> #include <asm/mpspec.h> #include <asm/smp.h> @@ -57,7 +58,6 @@ EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 #include <asm/proto.h> -#include <asm/genapic.h> #else /* X86 */ @@ -106,21 +106,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; */ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; -#ifdef CONFIG_X86_64 - -/* rely on all ACPI tables being in the direct mapping */ -char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) -{ - if (!phys_addr || !size) - return NULL; - - if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE) - return __va(phys_addr); - - return NULL; -} - -#else /* * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END, @@ -139,11 +124,15 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size) unsigned long base, offset, mapped_size; int idx; - if (phys + size < 8 * 1024 * 1024) + if (!phys || !size) + return NULL; + + if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT)) return __va(phys); offset = phys & (PAGE_SIZE - 1); mapped_size = PAGE_SIZE - offset; + clear_fixmap(FIX_ACPI_END); set_fixmap(FIX_ACPI_END, phys); base = fix_to_virt(FIX_ACPI_END); @@ -155,19 +144,29 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size) if (--idx < FIX_ACPI_BEGIN) return NULL; /* cannot handle this */ phys += PAGE_SIZE; + clear_fixmap(idx); set_fixmap(idx, phys); mapped_size += PAGE_SIZE; } return ((unsigned char *)base + offset); } -#endif #ifdef CONFIG_PCI_MMCONFIG /* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ struct acpi_mcfg_allocation *pci_mmcfg_config; int pci_mmcfg_config_num; +static int acpi_mcfg_64bit_base_addr __initdata = FALSE; + +static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) +{ + if (!strcmp(mcfg->header.oem_id, "SGI")) + acpi_mcfg_64bit_base_addr = TRUE; + + return 0; +} + int __init acpi_parse_mcfg(struct acpi_table_header *header) { struct acpi_table_mcfg *mcfg; @@ -200,8 +199,12 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header) } memcpy(pci_mmcfg_config, &mcfg[1], config_size); + + acpi_mcfg_oem_check(mcfg); + for (i = 0; i < pci_mmcfg_config_num; ++i) { - if (pci_mmcfg_config[i].address > 0xFFFFFFFF) { + if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && + !acpi_mcfg_64bit_base_addr) { printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n"); kfree(pci_mmcfg_config); @@ -249,10 +252,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled) return; } -#ifdef CONFIG_X86_32 if (boot_cpu_physical_apicid != -1U) ver = apic_version[boot_cpu_physical_apicid]; -#endif generic_processor_info(id, ver); } @@ -338,8 +339,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e #ifdef CONFIG_X86_IO_APIC -struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - static int __init acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) { @@ -514,8 +513,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - extern void eisa_set_level_irq(unsigned int irq); - if (triggering == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } @@ -775,11 +772,9 @@ static void __init acpi_register_lapic_address(unsigned long address) set_fixmap_nocache(FIX_APIC_BASE, address); if (boot_cpu_physical_apicid == -1U) { - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); -#ifdef CONFIG_X86_32 + boot_cpu_physical_apicid = read_apic_id(); apic_version[boot_cpu_physical_apicid] = GET_APIC_VERSION(apic_read(APIC_LVR)); -#endif } } @@ -860,6 +855,364 @@ static int __init acpi_parse_madt_lapic_entries(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC +#define MP_ISA_BUS 0 + +#ifdef CONFIG_X86_ES7000 +extern int es7000_plat; +#endif + +static struct { + int apic_id; + int gsi_base; + int gsi_end; + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 __init uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mp_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mp_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mp_type = MP_IOAPIC; + mp_ioapics[idx].mp_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mp_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mp_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mp_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid, + mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +static void assign_to_mp_irq(struct mp_config_intsrc *m, + struct mp_config_intsrc *mp_irq) +{ + memcpy(mp_irq, m, sizeof(struct mp_config_intsrc)); +} + +static int mp_irq_cmp(struct mp_config_intsrc *mp_irq, + struct mp_config_intsrc *m) +{ + return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc)); +} + +static void save_mp_irq(struct mp_config_intsrc *m) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_cmp(&mp_irqs[i], m)) + return; + } + + assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + int ioapic; + int pin; + struct mp_config_intsrc mp_irq; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + mp_irq.mp_type = MP_INTSRC; + mp_irq.mp_irqtype = mp_INT; + mp_irq.mp_irqflag = (trigger << 2) | polarity; + mp_irq.mp_srcbus = MP_ISA_BUS; + mp_irq.mp_srcbusirq = bus_irq; /* IRQ */ + mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */ + mp_irq.mp_dstirq = pin; /* INTIN# */ + + save_mp_irq(&mp_irq); +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + int i; + int ioapic; + unsigned int dstapic; + struct mp_config_intsrc mp_irq; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + pr_debug("Bus #%d is ISA\n", MP_ISA_BUS); + +#ifdef CONFIG_X86_ES7000 + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; +#endif + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + dstapic = mp_ioapics[ioapic].mp_apicid; + + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mp_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mp_srcbus == MP_ISA_BUS + && irq->mp_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if (irq->mp_dstapic == dstapic && + irq->mp_dstirq == i) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + mp_irq.mp_type = MP_INTSRC; + mp_irq.mp_irqflag = 0; /* Conforming */ + mp_irq.mp_srcbus = MP_ISA_BUS; + mp_irq.mp_dstapic = dstapic; + mp_irq.mp_irqtype = mp_INT; + mp_irq.mp_srcbusirq = i; /* Identity mapped */ + mp_irq.mp_dstirq = i; + + save_mp_irq(&mp_irq); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic; + int ioapic_pin; +#ifdef CONFIG_X86_32 +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifdef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { + pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#ifdef CONFIG_X86_32 + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); +#ifdef CONFIG_X86_32 + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + +int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, + u32 gsi, int triggering, int polarity) +{ +#ifdef CONFIG_X86_MPPARSE + struct mp_config_intsrc mp_irq; + int ioapic; + + if (!acpi_ioapic) + return 0; + + /* print the entry should happen on mptable identically */ + mp_irq.mp_type = MP_INTSRC; + mp_irq.mp_irqtype = mp_INT; + mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + mp_irq.mp_srcbus = number; + mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id; + mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; + + save_mp_irq(&mp_irq); +#endif + return 0; +} + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error @@ -993,7 +1346,9 @@ static void __init acpi_process_madt(void) acpi_ioapic = 1; smp_found_config = 1; +#ifdef CONFIG_X86_32 setup_apic_routing(); +#endif } } if (error == -EINVAL) { @@ -1009,8 +1364,6 @@ static void __init acpi_process_madt(void) return; } -#ifdef __i386__ - static int __init disable_acpi_irq(const struct dmi_system_id *d) { if (!acpi_force) { @@ -1061,6 +1414,24 @@ static int __init force_acpi_ht(const struct dmi_system_id *d) } /* + * Force ignoring BIOS IRQ0 pin2 override + */ +static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) +{ + /* + * The ati_ixp4x0_rev() early PCI quirk should have set + * the acpi_skip_timer_override flag already: + */ + if (!acpi_skip_timer_override) { + WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); + pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + d->ident); + acpi_skip_timer_override = 1; + } + return 0; +} + +/* * If your system is blacklisted here, but you find that acpi=force * works for you, please contact acpi-devel@sourceforge.net */ @@ -1227,11 +1598,51 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), }, }, + /* + * HP laptops which use a DSDT reporting as HP/SB400/10000, + * which includes some code which overrides all temperature + * trip points to 16C if the INTIN2 input of the I/O APIC + * is enabled. This input is incorrectly designated the + * ISA IRQ 0 via an interrupt source override even though + * it is wired to the output of the master 8259A and INTIN0 + * is not connected at all. Force ignoring BIOS IRQ0 pin2 + * override in that cases. + */ + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "HP nx6115 laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"), + }, + }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "HP NX6125 laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"), + }, + }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "HP NX6325 laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "HP 6715b laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), + }, + }, {} }; -#endif /* __i386__ */ - /* * acpi_boot_table_init() and acpi_boot_init() * called from setup_arch(), always. @@ -1259,9 +1670,7 @@ int __init acpi_boot_table_init(void) { int error; -#ifdef __i386__ dmi_check_system(acpi_dmi_table); -#endif /* * If acpi_disabled, bail out @@ -1386,6 +1795,20 @@ static int __init parse_pci(char *arg) } early_param("pci", parse_pci); +int __init acpi_mps_check(void) +{ +#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE) +/* mptable code is not built-in*/ + if (acpi_disabled || acpi_noirq) { + printk(KERN_WARNING "MPS support code is not built-in.\n" + "Using acpi=off or acpi=noirq or pci=noacpi " + "may have problem\n"); + return 1; + } +#endif + return 0; +} + #ifdef CONFIG_X86_IO_APIC static int __init parse_acpi_skip_timer_override(char *arg) { diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index de2d2e4ebad..7c074eec39f 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -56,6 +56,12 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_ACPI)) buf[2] |= ACPI_PDC_T_FFH; + /* + * If mwait/monitor is unsupported, C2/C3_FFH will be disabled + */ + if (!cpu_has(c, X86_FEATURE_MWAIT)) + buf[2] &= ~(ACPI_PDC_C_C2C3_FFH); + obj->type = ACPI_TYPE_BUFFER; obj->buffer.length = 12; obj->buffer.pointer = (u8 *) buf; diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index f9b77fb37e5..3355973b12a 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -5,6 +5,7 @@ #include <asm/msr-index.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/processor-flags.h> .code16 .section ".header", "a" @@ -24,6 +25,11 @@ pmode_gdt: .quad 0 realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 +_pad1: .byte 0 +wakeup_jmp: .byte 0xea /* ljmpw */ +wakeup_jmp_off: .word 3f +wakeup_jmp_seg: .word 0 +wakeup_gdt: .quad 0, 0, 0 signature: .long 0x51ee1111 .text @@ -34,11 +40,34 @@ _start: cli cld + /* Apparently some dimwit BIOS programmers don't know how to + program a PM to RM transition, and we might end up here with + junk in the data segment descriptor registers. The only way + to repair that is to go into PM and fix it ourselves... */ + movw $16, %cx + lgdtl %cs:wakeup_gdt + movl %cr0, %eax + orb $X86_CR0_PE, %al + movl %eax, %cr0 + jmp 1f +1: ljmpw $8, $2f +2: + movw %cx, %ds + movw %cx, %es + movw %cx, %ss + movw %cx, %fs + movw %cx, %gs + + andb $~X86_CR0_PE, %al + movl %eax, %cr0 + jmp wakeup_jmp +3: /* Set up segments */ movw %cs, %ax movw %ax, %ds movw %ax, %es movw %ax, %ss + lidtl wakeup_idt movl $wakeup_stack_end, %esp @@ -98,7 +127,14 @@ bogus_real_magic: jmp 1b .data - .balign 4 + .balign 8 + + /* This is the standard real-mode IDT */ +wakeup_idt: + .word 0xffff /* limit */ + .long 0 /* address */ + .word 0 + .globl HEAP, heap_end HEAP: .long wakeup_heap diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index ef8166fe802..69d38d0b2b6 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -24,6 +24,11 @@ struct wakeup_header { u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ + u8 _pad1; + u8 wakeup_jmp; + u16 wakeup_jmp_off; + u16 wakeup_jmp_seg; + u64 wakeup_gdt[3]; u32 signature; /* To check we have correct structure */ } __attribute__((__packed__)); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index afc25ee9964..426e5d91b63 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -9,6 +9,7 @@ #include <linux/bootmem.h> #include <linux/dmi.h> #include <linux/cpumask.h> +#include <asm/segment.h> #include "realmode/wakeup.h" #include "sleep.h" @@ -19,7 +20,7 @@ unsigned long acpi_realmode_flags; /* address in low memory of the wakeup routine. */ static unsigned long acpi_realmode; -#ifdef CONFIG_64BIT +#if defined(CONFIG_SMP) && defined(CONFIG_64BIT) static char temp_stack[10240]; #endif @@ -50,6 +51,29 @@ int acpi_save_state_mem(void) header->video_mode = saved_video_mode; + header->wakeup_jmp_seg = acpi_wakeup_address >> 4; + + /* + * Set up the wakeup GDT. We set these up as Big Real Mode, + * that is, with limits set to 4 GB. At least the Lenovo + * Thinkpad X61 is known to need this for the video BIOS + * initialization quirk to work; this is likely to also + * be the case for other laptops or integrated video devices. + */ + + /* GDT[0]: GDT self-pointer */ + header->wakeup_gdt[0] = + (u64)(sizeof(header->wakeup_gdt) - 1) + + ((u64)(acpi_wakeup_address + + ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) + << 16); + /* GDT[1]: big real mode-like code segment */ + header->wakeup_gdt[1] = + GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); + /* GDT[2]: big real mode-like data segment */ + header->wakeup_gdt[2] = + GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); + #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -62,7 +86,7 @@ int acpi_save_state_mem(void) #endif /* !CONFIG_64BIT */ header->pmode_cr0 = read_cr0(); - header->pmode_cr4 = read_cr4(); + header->pmode_cr4 = read_cr4_safe(); header->realmode_flags = acpi_realmode_flags; header->real_magic = 0x12345678; @@ -72,7 +96,9 @@ int acpi_save_state_mem(void) saved_magic = 0x12345678; #else /* CONFIG_64BIT */ header->trampoline_segment = setup_trampoline() >> 4; - init_rsp = (unsigned long)temp_stack + 4096; +#ifdef CONFIG_SMP + stack_start.sp = temp_stack + 4096; +#endif initial_code = (unsigned long)wakeup_long64; saved_magic = 0x123456789abcdef0; #endif /* CONFIG_64BIT */ @@ -111,7 +137,7 @@ void __init acpi_reserve_bootmem(void) return; } - acpi_wakeup_address = acpi_realmode; + acpi_wakeup_address = virt_to_phys((void *)acpi_realmode); } @@ -124,6 +150,12 @@ static int __init acpi_sleep_setup(char *str) acpi_realmode_flags |= 2; if (strncmp(str, "s3_beep", 7) == 0) acpi_realmode_flags |= 4; +#ifdef CONFIG_HIBERNATION + if (strncmp(str, "s4_nohwsig", 10) == 0) + acpi_no_s4_hw_signature(); +#endif + if (strncmp(str, "old_ordering", 12) == 0) + acpi_old_suspend_ordering(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 65c7857a90d..fb04e49776b 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -1,6 +1,6 @@ #include <linux/module.h> #include <linux/sched.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/list.h> #include <linux/kprobes.h> #include <linux/mm.h> @@ -143,37 +143,27 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = { #ifdef CONFIG_X86_64 extern char __vsyscall_0; -static inline const unsigned char*const * find_nop_table(void) +const unsigned char *const *find_nop_table(void) { - return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL || - boot_cpu_data.x86 < 6 ? k8_nops : p6_nops; + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_has(X86_FEATURE_NOPL)) + return p6_nops; + else + return k8_nops; } #else /* CONFIG_X86_64 */ -static const struct nop { - int cpuid; - const unsigned char *const *noptable; -} noptypes[] = { - { X86_FEATURE_K8, k8_nops }, - { X86_FEATURE_K7, k7_nops }, - { X86_FEATURE_P4, p6_nops }, - { X86_FEATURE_P3, p6_nops }, - { -1, NULL } -}; - -static const unsigned char*const * find_nop_table(void) +const unsigned char *const *find_nop_table(void) { - const unsigned char *const *noptable = intel_nops; - int i; - - for (i = 0; noptypes[i].cpuid >= 0; i++) { - if (boot_cpu_has(noptypes[i].cpuid)) { - noptable = noptypes[i].noptable; - break; - } - } - return noptable; + if (boot_cpu_has(X86_FEATURE_K8)) + return k8_nops; + else if (boot_cpu_has(X86_FEATURE_K7)) + return k7_nops; + else if (boot_cpu_has(X86_FEATURE_NOPL)) + return p6_nops; + else + return intel_nops; } #endif /* CONFIG_X86_64 */ @@ -241,25 +231,25 @@ static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end) continue; if (*ptr > text_end) continue; - text_poke(*ptr, ((unsigned char []){0xf0}), 1); /* add lock prefix */ + /* turn DS segment override prefix into lock prefix */ + text_poke(*ptr, ((unsigned char []){0xf0}), 1); }; } static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end) { u8 **ptr; - char insn[1]; if (noreplace_smp) return; - add_nops(insn, 1); for (ptr = start; ptr < end; ptr++) { if (*ptr < text) continue; if (*ptr > text_end) continue; - text_poke(*ptr, insn, 1); + /* turn lock prefix into DS segment override prefix */ + text_poke(*ptr, ((unsigned char []){0x3E}), 1); }; } @@ -279,7 +269,7 @@ struct smp_alt_module { struct list_head next; }; static LIST_HEAD(smp_alt_modules); -static DEFINE_SPINLOCK(smp_alt); +static DEFINE_MUTEX(smp_alt); static int smp_mode = 1; /* protected by smp_alt */ void alternatives_smp_module_add(struct module *mod, char *name, @@ -312,12 +302,12 @@ void alternatives_smp_module_add(struct module *mod, char *name, __func__, smp->locks, smp->locks_end, smp->text, smp->text_end, smp->name); - spin_lock(&smp_alt); + mutex_lock(&smp_alt); list_add_tail(&smp->next, &smp_alt_modules); if (boot_cpu_has(X86_FEATURE_UP)) alternatives_smp_unlock(smp->locks, smp->locks_end, smp->text, smp->text_end); - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } void alternatives_smp_module_del(struct module *mod) @@ -327,17 +317,17 @@ void alternatives_smp_module_del(struct module *mod) if (smp_alt_once || noreplace_smp) return; - spin_lock(&smp_alt); + mutex_lock(&smp_alt); list_for_each_entry(item, &smp_alt_modules, next) { if (mod != item->mod) continue; list_del(&item->next); - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); DPRINTK("%s: %s\n", __func__, item->name); kfree(item); return; } - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } void alternatives_smp_switch(int smp) @@ -359,7 +349,7 @@ void alternatives_smp_switch(int smp) return; BUG_ON(!smp && (num_online_cpus() > 1)); - spin_lock(&smp_alt); + mutex_lock(&smp_alt); /* * Avoid unnecessary switches because it forces JIT based VMs to @@ -383,7 +373,7 @@ void alternatives_smp_switch(int smp) mod->text, mod->text_end); } smp_mode = smp; - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } #endif diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c new file mode 100644 index 00000000000..34e4d112b1e --- /dev/null +++ b/arch/x86/kernel/amd_iommu.c @@ -0,0 +1,1383 @@ +/* + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. + * Author: Joerg Roedel <joerg.roedel@amd.com> + * Leo Duran <leo.duran@amd.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/pci.h> +#include <linux/gfp.h> +#include <linux/bitops.h> +#include <linux/scatterlist.h> +#include <linux/iommu-helper.h> +#include <asm/proto.h> +#include <asm/iommu.h> +#include <asm/amd_iommu_types.h> +#include <asm/amd_iommu.h> + +#define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28)) + +#define EXIT_LOOP_COUNT 10000000 + +static DEFINE_RWLOCK(amd_iommu_devtable_lock); + +/* A list of preallocated protection domains */ +static LIST_HEAD(iommu_pd_list); +static DEFINE_SPINLOCK(iommu_pd_list_lock); + +/* + * general struct to manage commands send to an IOMMU + */ +struct iommu_cmd { + u32 data[4]; +}; + +static int dma_ops_unity_map(struct dma_ops_domain *dma_dom, + struct unity_map_entry *e); + +/* returns !0 if the IOMMU is caching non-present entries in its TLB */ +static int iommu_has_npcache(struct amd_iommu *iommu) +{ + return iommu->cap & IOMMU_CAP_NPCACHE; +} + +/**************************************************************************** + * + * Interrupt handling functions + * + ****************************************************************************/ + +static void iommu_print_event(void *__evt) +{ + u32 *event = __evt; + int type = (event[1] >> EVENT_TYPE_SHIFT) & EVENT_TYPE_MASK; + int devid = (event[0] >> EVENT_DEVID_SHIFT) & EVENT_DEVID_MASK; + int domid = (event[1] >> EVENT_DOMID_SHIFT) & EVENT_DOMID_MASK; + int flags = (event[1] >> EVENT_FLAGS_SHIFT) & EVENT_FLAGS_MASK; + u64 address = (u64)(((u64)event[3]) << 32) | event[2]; + + printk(KERN_ERR "AMD IOMMU: Event logged ["); + + switch (type) { + case EVENT_TYPE_ILL_DEV: + printk("ILLEGAL_DEV_TABLE_ENTRY device=%02x:%02x.%x " + "address=0x%016llx flags=0x%04x]\n", + PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid), + address, flags); + break; + case EVENT_TYPE_IO_FAULT: + printk("IO_PAGE_FAULT device=%02x:%02x.%x " + "domain=0x%04x address=0x%016llx flags=0x%04x]\n", + PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid), + domid, address, flags); + break; + case EVENT_TYPE_DEV_TAB_ERR: + printk("DEV_TAB_HARDWARE_ERROR device=%02x:%02x.%x " + "address=0x%016llx flags=0x%04x]\n", + PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid), + address, flags); + break; + case EVENT_TYPE_PAGE_TAB_ERR: + printk("PAGE_TAB_HARDWARE_ERROR device=%02x:%02x.%x " + "domain=0x%04x address=0x%016llx flags=0x%04x]\n", + PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid), + domid, address, flags); + break; + case EVENT_TYPE_ILL_CMD: + printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address); + break; + case EVENT_TYPE_CMD_HARD_ERR: + printk("COMMAND_HARDWARE_ERROR address=0x%016llx " + "flags=0x%04x]\n", address, flags); + break; + case EVENT_TYPE_IOTLB_INV_TO: + printk("IOTLB_INV_TIMEOUT device=%02x:%02x.%x " + "address=0x%016llx]\n", + PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid), + address); + break; + case EVENT_TYPE_INV_DEV_REQ: + printk("INVALID_DEVICE_REQUEST device=%02x:%02x.%x " + "address=0x%016llx flags=0x%04x]\n", + PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid), + address, flags); + break; + default: + printk(KERN_ERR "UNKNOWN type=0x%02x]\n", type); + } +} + +static void iommu_poll_events(struct amd_iommu *iommu) +{ + u32 head, tail; + unsigned long flags; + + spin_lock_irqsave(&iommu->lock, flags); + + head = readl(iommu->mmio_base + MMIO_EVT_HEAD_OFFSET); + tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET); + + while (head != tail) { + iommu_print_event(iommu->evt_buf + head); + head = (head + EVENT_ENTRY_SIZE) % iommu->evt_buf_size; + } + + writel(head, iommu->mmio_base + MMIO_EVT_HEAD_OFFSET); + + spin_unlock_irqrestore(&iommu->lock, flags); +} + +irqreturn_t amd_iommu_int_handler(int irq, void *data) +{ + struct amd_iommu *iommu; + + list_for_each_entry(iommu, &amd_iommu_list, list) + iommu_poll_events(iommu); + + return IRQ_HANDLED; +} + +/**************************************************************************** + * + * IOMMU command queuing functions + * + ****************************************************************************/ + +/* + * Writes the command to the IOMMUs command buffer and informs the + * hardware about the new command. Must be called with iommu->lock held. + */ +static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) +{ + u32 tail, head; + u8 *target; + + tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); + target = iommu->cmd_buf + tail; + memcpy_toio(target, cmd, sizeof(*cmd)); + tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; + head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); + if (tail == head) + return -ENOMEM; + writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); + + return 0; +} + +/* + * General queuing function for commands. Takes iommu->lock and calls + * __iommu_queue_command(). + */ +static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&iommu->lock, flags); + ret = __iommu_queue_command(iommu, cmd); + spin_unlock_irqrestore(&iommu->lock, flags); + + return ret; +} + +/* + * This function is called whenever we need to ensure that the IOMMU has + * completed execution of all commands we sent. It sends a + * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs + * us about that by writing a value to a physical address we pass with + * the command. + */ +static int iommu_completion_wait(struct amd_iommu *iommu) +{ + int ret = 0, ready = 0; + unsigned status = 0; + struct iommu_cmd cmd; + unsigned long flags, i = 0; + + memset(&cmd, 0, sizeof(cmd)); + cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; + CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT); + + iommu->need_sync = 0; + + spin_lock_irqsave(&iommu->lock, flags); + + ret = __iommu_queue_command(iommu, &cmd); + + if (ret) + goto out; + + while (!ready && (i < EXIT_LOOP_COUNT)) { + ++i; + /* wait for the bit to become one */ + status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET); + ready = status & MMIO_STATUS_COM_WAIT_INT_MASK; + } + + /* set bit back to zero */ + status &= ~MMIO_STATUS_COM_WAIT_INT_MASK; + writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET); + + if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) + printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); +out: + spin_unlock_irqrestore(&iommu->lock, flags); + + return 0; +} + +/* + * Command send function for invalidating a device table entry + */ +static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) +{ + struct iommu_cmd cmd; + int ret; + + BUG_ON(iommu == NULL); + + memset(&cmd, 0, sizeof(cmd)); + CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY); + cmd.data[0] = devid; + + ret = iommu_queue_command(iommu, &cmd); + + iommu->need_sync = 1; + + return ret; +} + +/* + * Generic command send function for invalidaing TLB entries + */ +static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, + u64 address, u16 domid, int pde, int s) +{ + struct iommu_cmd cmd; + int ret; + + memset(&cmd, 0, sizeof(cmd)); + address &= PAGE_MASK; + CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES); + cmd.data[1] |= domid; + cmd.data[2] = lower_32_bits(address); + cmd.data[3] = upper_32_bits(address); + if (s) /* size bit - we flush more than one 4kb page */ + cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; + if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ + cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; + + ret = iommu_queue_command(iommu, &cmd); + + iommu->need_sync = 1; + + return ret; +} + +/* + * TLB invalidation function which is called from the mapping functions. + * It invalidates a single PTE if the range to flush is within a single + * page. Otherwise it flushes the whole TLB of the IOMMU. + */ +static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid, + u64 address, size_t size) +{ + int s = 0; + unsigned pages = iommu_num_pages(address, size); + + address &= PAGE_MASK; + + if (pages > 1) { + /* + * If we have to flush more than one page, flush all + * TLB entries for this domain + */ + address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + s = 1; + } + + iommu_queue_inv_iommu_pages(iommu, address, domid, 0, s); + + return 0; +} + +/* Flush the whole IO/TLB for a given protection domain */ +static void iommu_flush_tlb(struct amd_iommu *iommu, u16 domid) +{ + u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + + iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 1); +} + +/**************************************************************************** + * + * The functions below are used the create the page table mappings for + * unity mapped regions. + * + ****************************************************************************/ + +/* + * Generic mapping functions. It maps a physical address into a DMA + * address space. It allocates the page table pages if necessary. + * In the future it can be extended to a generic mapping function + * supporting all features of AMD IOMMU page tables like level skipping + * and full 64 bit address spaces. + */ +static int iommu_map(struct protection_domain *dom, + unsigned long bus_addr, + unsigned long phys_addr, + int prot) +{ + u64 __pte, *pte, *page; + + bus_addr = PAGE_ALIGN(bus_addr); + phys_addr = PAGE_ALIGN(bus_addr); + + /* only support 512GB address spaces for now */ + if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK)) + return -EINVAL; + + pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)]; + + if (!IOMMU_PTE_PRESENT(*pte)) { + page = (u64 *)get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + *pte = IOMMU_L2_PDE(virt_to_phys(page)); + } + + pte = IOMMU_PTE_PAGE(*pte); + pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)]; + + if (!IOMMU_PTE_PRESENT(*pte)) { + page = (u64 *)get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + *pte = IOMMU_L1_PDE(virt_to_phys(page)); + } + + pte = IOMMU_PTE_PAGE(*pte); + pte = &pte[IOMMU_PTE_L0_INDEX(bus_addr)]; + + if (IOMMU_PTE_PRESENT(*pte)) + return -EBUSY; + + __pte = phys_addr | IOMMU_PTE_P; + if (prot & IOMMU_PROT_IR) + __pte |= IOMMU_PTE_IR; + if (prot & IOMMU_PROT_IW) + __pte |= IOMMU_PTE_IW; + + *pte = __pte; + + return 0; +} + +/* + * This function checks if a specific unity mapping entry is needed for + * this specific IOMMU. + */ +static int iommu_for_unity_map(struct amd_iommu *iommu, + struct unity_map_entry *entry) +{ + u16 bdf, i; + + for (i = entry->devid_start; i <= entry->devid_end; ++i) { + bdf = amd_iommu_alias_table[i]; + if (amd_iommu_rlookup_table[bdf] == iommu) + return 1; + } + + return 0; +} + +/* + * Init the unity mappings for a specific IOMMU in the system + * + * Basically iterates over all unity mapping entries and applies them to + * the default domain DMA of that IOMMU if necessary. + */ +static int iommu_init_unity_mappings(struct amd_iommu *iommu) +{ + struct unity_map_entry *entry; + int ret; + + list_for_each_entry(entry, &amd_iommu_unity_map, list) { + if (!iommu_for_unity_map(iommu, entry)) + continue; + ret = dma_ops_unity_map(iommu->default_dom, entry); + if (ret) + return ret; + } + + return 0; +} + +/* + * This function actually applies the mapping to the page table of the + * dma_ops domain. + */ +static int dma_ops_unity_map(struct dma_ops_domain *dma_dom, + struct unity_map_entry *e) +{ + u64 addr; + int ret; + + for (addr = e->address_start; addr < e->address_end; + addr += PAGE_SIZE) { + ret = iommu_map(&dma_dom->domain, addr, addr, e->prot); + if (ret) + return ret; + /* + * if unity mapping is in aperture range mark the page + * as allocated in the aperture + */ + if (addr < dma_dom->aperture_size) + __set_bit(addr >> PAGE_SHIFT, dma_dom->bitmap); + } + + return 0; +} + +/* + * Inits the unity mappings required for a specific device + */ +static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom, + u16 devid) +{ + struct unity_map_entry *e; + int ret; + + list_for_each_entry(e, &amd_iommu_unity_map, list) { + if (!(devid >= e->devid_start && devid <= e->devid_end)) + continue; + ret = dma_ops_unity_map(dma_dom, e); + if (ret) + return ret; + } + + return 0; +} + +/**************************************************************************** + * + * The next functions belong to the address allocator for the dma_ops + * interface functions. They work like the allocators in the other IOMMU + * drivers. Its basically a bitmap which marks the allocated pages in + * the aperture. Maybe it could be enhanced in the future to a more + * efficient allocator. + * + ****************************************************************************/ + +/* + * The address allocator core function. + * + * called with domain->lock held + */ +static unsigned long dma_ops_alloc_addresses(struct device *dev, + struct dma_ops_domain *dom, + unsigned int pages, + unsigned long align_mask, + u64 dma_mask) +{ + unsigned long limit; + unsigned long address; + unsigned long boundary_size; + + boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, + PAGE_SIZE) >> PAGE_SHIFT; + limit = iommu_device_max_index(dom->aperture_size >> PAGE_SHIFT, 0, + dma_mask >> PAGE_SHIFT); + + if (dom->next_bit >= limit) { + dom->next_bit = 0; + dom->need_flush = true; + } + + address = iommu_area_alloc(dom->bitmap, limit, dom->next_bit, pages, + 0 , boundary_size, align_mask); + if (address == -1) { + address = iommu_area_alloc(dom->bitmap, limit, 0, pages, + 0, boundary_size, align_mask); + dom->need_flush = true; + } + + if (likely(address != -1)) { + dom->next_bit = address + pages; + address <<= PAGE_SHIFT; + } else + address = bad_dma_address; + + WARN_ON((address + (PAGE_SIZE*pages)) > dom->aperture_size); + + return address; +} + +/* + * The address free function. + * + * called with domain->lock held + */ +static void dma_ops_free_addresses(struct dma_ops_domain *dom, + unsigned long address, + unsigned int pages) +{ + address >>= PAGE_SHIFT; + iommu_area_free(dom->bitmap, address, pages); +} + +/**************************************************************************** + * + * The next functions belong to the domain allocation. A domain is + * allocated for every IOMMU as the default domain. If device isolation + * is enabled, every device get its own domain. The most important thing + * about domains is the page table mapping the DMA address space they + * contain. + * + ****************************************************************************/ + +static u16 domain_id_alloc(void) +{ + unsigned long flags; + int id; + + write_lock_irqsave(&amd_iommu_devtable_lock, flags); + id = find_first_zero_bit(amd_iommu_pd_alloc_bitmap, MAX_DOMAIN_ID); + BUG_ON(id == 0); + if (id > 0 && id < MAX_DOMAIN_ID) + __set_bit(id, amd_iommu_pd_alloc_bitmap); + else + id = 0; + write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); + + return id; +} + +/* + * Used to reserve address ranges in the aperture (e.g. for exclusion + * ranges. + */ +static void dma_ops_reserve_addresses(struct dma_ops_domain *dom, + unsigned long start_page, + unsigned int pages) +{ + unsigned int last_page = dom->aperture_size >> PAGE_SHIFT; + + if (start_page + pages > last_page) + pages = last_page - start_page; + + iommu_area_reserve(dom->bitmap, start_page, pages); +} + +static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom) +{ + int i, j; + u64 *p1, *p2, *p3; + + p1 = dma_dom->domain.pt_root; + + if (!p1) + return; + + for (i = 0; i < 512; ++i) { + if (!IOMMU_PTE_PRESENT(p1[i])) + continue; + + p2 = IOMMU_PTE_PAGE(p1[i]); + for (j = 0; j < 512; ++i) { + if (!IOMMU_PTE_PRESENT(p2[j])) + continue; + p3 = IOMMU_PTE_PAGE(p2[j]); + free_page((unsigned long)p3); + } + + free_page((unsigned long)p2); + } + + free_page((unsigned long)p1); +} + +/* + * Free a domain, only used if something went wrong in the + * allocation path and we need to free an already allocated page table + */ +static void dma_ops_domain_free(struct dma_ops_domain *dom) +{ + if (!dom) + return; + + dma_ops_free_pagetable(dom); + + kfree(dom->pte_pages); + + kfree(dom->bitmap); + + kfree(dom); +} + +/* + * Allocates a new protection domain usable for the dma_ops functions. + * It also intializes the page table and the address allocator data + * structures required for the dma_ops interface + */ +static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu, + unsigned order) +{ + struct dma_ops_domain *dma_dom; + unsigned i, num_pte_pages; + u64 *l2_pde; + u64 address; + + /* + * Currently the DMA aperture must be between 32 MB and 1GB in size + */ + if ((order < 25) || (order > 30)) + return NULL; + + dma_dom = kzalloc(sizeof(struct dma_ops_domain), GFP_KERNEL); + if (!dma_dom) + return NULL; + + spin_lock_init(&dma_dom->domain.lock); + + dma_dom->domain.id = domain_id_alloc(); + if (dma_dom->domain.id == 0) + goto free_dma_dom; + dma_dom->domain.mode = PAGE_MODE_3_LEVEL; + dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL); + dma_dom->domain.priv = dma_dom; + if (!dma_dom->domain.pt_root) + goto free_dma_dom; + dma_dom->aperture_size = (1ULL << order); + dma_dom->bitmap = kzalloc(dma_dom->aperture_size / (PAGE_SIZE * 8), + GFP_KERNEL); + if (!dma_dom->bitmap) + goto free_dma_dom; + /* + * mark the first page as allocated so we never return 0 as + * a valid dma-address. So we can use 0 as error value + */ + dma_dom->bitmap[0] = 1; + dma_dom->next_bit = 0; + + dma_dom->need_flush = false; + dma_dom->target_dev = 0xffff; + + /* Intialize the exclusion range if necessary */ + if (iommu->exclusion_start && + iommu->exclusion_start < dma_dom->aperture_size) { + unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT; + int pages = iommu_num_pages(iommu->exclusion_start, + iommu->exclusion_length); + dma_ops_reserve_addresses(dma_dom, startpage, pages); + } + + /* + * At the last step, build the page tables so we don't need to + * allocate page table pages in the dma_ops mapping/unmapping + * path. + */ + num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512); + dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *), + GFP_KERNEL); + if (!dma_dom->pte_pages) + goto free_dma_dom; + + l2_pde = (u64 *)get_zeroed_page(GFP_KERNEL); + if (l2_pde == NULL) + goto free_dma_dom; + + dma_dom->domain.pt_root[0] = IOMMU_L2_PDE(virt_to_phys(l2_pde)); + + for (i = 0; i < num_pte_pages; ++i) { + dma_dom->pte_pages[i] = (u64 *)get_zeroed_page(GFP_KERNEL); + if (!dma_dom->pte_pages[i]) + goto free_dma_dom; + address = virt_to_phys(dma_dom->pte_pages[i]); + l2_pde[i] = IOMMU_L1_PDE(address); + } + + return dma_dom; + +free_dma_dom: + dma_ops_domain_free(dma_dom); + + return NULL; +} + +/* + * Find out the protection domain structure for a given PCI device. This + * will give us the pointer to the page table root for example. + */ +static struct protection_domain *domain_for_device(u16 devid) +{ + struct protection_domain *dom; + unsigned long flags; + + read_lock_irqsave(&amd_iommu_devtable_lock, flags); + dom = amd_iommu_pd_table[devid]; + read_unlock_irqrestore(&amd_iommu_devtable_lock, flags); + + return dom; +} + +/* + * If a device is not yet associated with a domain, this function does + * assigns it visible for the hardware + */ +static void set_device_domain(struct amd_iommu *iommu, + struct protection_domain *domain, + u16 devid) +{ + unsigned long flags; + + u64 pte_root = virt_to_phys(domain->pt_root); + + pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK) + << DEV_ENTRY_MODE_SHIFT; + pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV; + + write_lock_irqsave(&amd_iommu_devtable_lock, flags); + amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root); + amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root); + amd_iommu_dev_table[devid].data[2] = domain->id; + + amd_iommu_pd_table[devid] = domain; + write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); + + iommu_queue_inv_dev_entry(iommu, devid); + + iommu->need_sync = 1; +} + +/***************************************************************************** + * + * The next functions belong to the dma_ops mapping/unmapping code. + * + *****************************************************************************/ + +/* + * This function checks if the driver got a valid device from the caller to + * avoid dereferencing invalid pointers. + */ +static bool check_device(struct device *dev) +{ + if (!dev || !dev->dma_mask) + return false; + + return true; +} + +/* + * In this function the list of preallocated protection domains is traversed to + * find the domain for a specific device + */ +static struct dma_ops_domain *find_protection_domain(u16 devid) +{ + struct dma_ops_domain *entry, *ret = NULL; + unsigned long flags; + + if (list_empty(&iommu_pd_list)) + return NULL; + + spin_lock_irqsave(&iommu_pd_list_lock, flags); + + list_for_each_entry(entry, &iommu_pd_list, list) { + if (entry->target_dev == devid) { + ret = entry; + list_del(&ret->list); + break; + } + } + + spin_unlock_irqrestore(&iommu_pd_list_lock, flags); + + return ret; +} + +/* + * In the dma_ops path we only have the struct device. This function + * finds the corresponding IOMMU, the protection domain and the + * requestor id for a given device. + * If the device is not yet associated with a domain this is also done + * in this function. + */ +static int get_device_resources(struct device *dev, + struct amd_iommu **iommu, + struct protection_domain **domain, + u16 *bdf) +{ + struct dma_ops_domain *dma_dom; + struct pci_dev *pcidev; + u16 _bdf; + + *iommu = NULL; + *domain = NULL; + *bdf = 0xffff; + + if (dev->bus != &pci_bus_type) + return 0; + + pcidev = to_pci_dev(dev); + _bdf = calc_devid(pcidev->bus->number, pcidev->devfn); + + /* device not translated by any IOMMU in the system? */ + if (_bdf > amd_iommu_last_bdf) + return 0; + + *bdf = amd_iommu_alias_table[_bdf]; + + *iommu = amd_iommu_rlookup_table[*bdf]; + if (*iommu == NULL) + return 0; + *domain = domain_for_device(*bdf); + if (*domain == NULL) { + dma_dom = find_protection_domain(*bdf); + if (!dma_dom) + dma_dom = (*iommu)->default_dom; + *domain = &dma_dom->domain; + set_device_domain(*iommu, *domain, *bdf); + printk(KERN_INFO "AMD IOMMU: Using protection domain %d for " + "device ", (*domain)->id); + print_devid(_bdf, 1); + } + + return 1; +} + +/* + * This is the generic map function. It maps one 4kb page at paddr to + * the given address in the DMA address space for the domain. + */ +static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu, + struct dma_ops_domain *dom, + unsigned long address, + phys_addr_t paddr, + int direction) +{ + u64 *pte, __pte; + + WARN_ON(address > dom->aperture_size); + + paddr &= PAGE_MASK; + + pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)]; + pte += IOMMU_PTE_L0_INDEX(address); + + __pte = paddr | IOMMU_PTE_P | IOMMU_PTE_FC; + + if (direction == DMA_TO_DEVICE) + __pte |= IOMMU_PTE_IR; + else if (direction == DMA_FROM_DEVICE) + __pte |= IOMMU_PTE_IW; + else if (direction == DMA_BIDIRECTIONAL) + __pte |= IOMMU_PTE_IR | IOMMU_PTE_IW; + + WARN_ON(*pte); + + *pte = __pte; + + return (dma_addr_t)address; +} + +/* + * The generic unmapping function for on page in the DMA address space. + */ +static void dma_ops_domain_unmap(struct amd_iommu *iommu, + struct dma_ops_domain *dom, + unsigned long address) +{ + u64 *pte; + + if (address >= dom->aperture_size) + return; + + WARN_ON(address & 0xfffULL || address > dom->aperture_size); + + pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)]; + pte += IOMMU_PTE_L0_INDEX(address); + + WARN_ON(!*pte); + + *pte = 0ULL; +} + +/* + * This function contains common code for mapping of a physically + * contiguous memory region into DMA address space. It is uses by all + * mapping functions provided by this IOMMU driver. + * Must be called with the domain lock held. + */ +static dma_addr_t __map_single(struct device *dev, + struct amd_iommu *iommu, + struct dma_ops_domain *dma_dom, + phys_addr_t paddr, + size_t size, + int dir, + bool align, + u64 dma_mask) +{ + dma_addr_t offset = paddr & ~PAGE_MASK; + dma_addr_t address, start; + unsigned int pages; + unsigned long align_mask = 0; + int i; + + pages = iommu_num_pages(paddr, size); + paddr &= PAGE_MASK; + + if (align) + align_mask = (1UL << get_order(size)) - 1; + + address = dma_ops_alloc_addresses(dev, dma_dom, pages, align_mask, + dma_mask); + if (unlikely(address == bad_dma_address)) + goto out; + + start = address; + for (i = 0; i < pages; ++i) { + dma_ops_domain_map(iommu, dma_dom, start, paddr, dir); + paddr += PAGE_SIZE; + start += PAGE_SIZE; + } + address += offset; + + if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) { + iommu_flush_tlb(iommu, dma_dom->domain.id); + dma_dom->need_flush = false; + } else if (unlikely(iommu_has_npcache(iommu))) + iommu_flush_pages(iommu, dma_dom->domain.id, address, size); + +out: + return address; +} + +/* + * Does the reverse of the __map_single function. Must be called with + * the domain lock held too + */ +static void __unmap_single(struct amd_iommu *iommu, + struct dma_ops_domain *dma_dom, + dma_addr_t dma_addr, + size_t size, + int dir) +{ + dma_addr_t i, start; + unsigned int pages; + + if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size)) + return; + + pages = iommu_num_pages(dma_addr, size); + dma_addr &= PAGE_MASK; + start = dma_addr; + + for (i = 0; i < pages; ++i) { + dma_ops_domain_unmap(iommu, dma_dom, start); + start += PAGE_SIZE; + } + + dma_ops_free_addresses(dma_dom, dma_addr, pages); + + if (amd_iommu_unmap_flush) + iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size); +} + +/* + * The exported map_single function for dma_ops. + */ +static dma_addr_t map_single(struct device *dev, phys_addr_t paddr, + size_t size, int dir) +{ + unsigned long flags; + struct amd_iommu *iommu; + struct protection_domain *domain; + u16 devid; + dma_addr_t addr; + u64 dma_mask; + + if (!check_device(dev)) + return bad_dma_address; + + dma_mask = *dev->dma_mask; + + get_device_resources(dev, &iommu, &domain, &devid); + + if (iommu == NULL || domain == NULL) + /* device not handled by any AMD IOMMU */ + return (dma_addr_t)paddr; + + spin_lock_irqsave(&domain->lock, flags); + addr = __map_single(dev, iommu, domain->priv, paddr, size, dir, false, + dma_mask); + if (addr == bad_dma_address) + goto out; + + if (unlikely(iommu->need_sync)) + iommu_completion_wait(iommu); + +out: + spin_unlock_irqrestore(&domain->lock, flags); + + return addr; +} + +/* + * The exported unmap_single function for dma_ops. + */ +static void unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, int dir) +{ + unsigned long flags; + struct amd_iommu *iommu; + struct protection_domain *domain; + u16 devid; + + if (!check_device(dev) || + !get_device_resources(dev, &iommu, &domain, &devid)) + /* device not handled by any AMD IOMMU */ + return; + + spin_lock_irqsave(&domain->lock, flags); + + __unmap_single(iommu, domain->priv, dma_addr, size, dir); + + if (unlikely(iommu->need_sync)) + iommu_completion_wait(iommu); + + spin_unlock_irqrestore(&domain->lock, flags); +} + +/* + * This is a special map_sg function which is used if we should map a + * device which is not handled by an AMD IOMMU in the system. + */ +static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist, + int nelems, int dir) +{ + struct scatterlist *s; + int i; + + for_each_sg(sglist, s, nelems, i) { + s->dma_address = (dma_addr_t)sg_phys(s); + s->dma_length = s->length; + } + + return nelems; +} + +/* + * The exported map_sg function for dma_ops (handles scatter-gather + * lists). + */ +static int map_sg(struct device *dev, struct scatterlist *sglist, + int nelems, int dir) +{ + unsigned long flags; + struct amd_iommu *iommu; + struct protection_domain *domain; + u16 devid; + int i; + struct scatterlist *s; + phys_addr_t paddr; + int mapped_elems = 0; + u64 dma_mask; + + if (!check_device(dev)) + return 0; + + dma_mask = *dev->dma_mask; + + get_device_resources(dev, &iommu, &domain, &devid); + + if (!iommu || !domain) + return map_sg_no_iommu(dev, sglist, nelems, dir); + + spin_lock_irqsave(&domain->lock, flags); + + for_each_sg(sglist, s, nelems, i) { + paddr = sg_phys(s); + + s->dma_address = __map_single(dev, iommu, domain->priv, + paddr, s->length, dir, false, + dma_mask); + + if (s->dma_address) { + s->dma_length = s->length; + mapped_elems++; + } else + goto unmap; + } + + if (unlikely(iommu->need_sync)) + iommu_completion_wait(iommu); + +out: + spin_unlock_irqrestore(&domain->lock, flags); + + return mapped_elems; +unmap: + for_each_sg(sglist, s, mapped_elems, i) { + if (s->dma_address) + __unmap_single(iommu, domain->priv, s->dma_address, + s->dma_length, dir); + s->dma_address = s->dma_length = 0; + } + + mapped_elems = 0; + + goto out; +} + +/* + * The exported map_sg function for dma_ops (handles scatter-gather + * lists). + */ +static void unmap_sg(struct device *dev, struct scatterlist *sglist, + int nelems, int dir) +{ + unsigned long flags; + struct amd_iommu *iommu; + struct protection_domain *domain; + struct scatterlist *s; + u16 devid; + int i; + + if (!check_device(dev) || + !get_device_resources(dev, &iommu, &domain, &devid)) + return; + + spin_lock_irqsave(&domain->lock, flags); + + for_each_sg(sglist, s, nelems, i) { + __unmap_single(iommu, domain->priv, s->dma_address, + s->dma_length, dir); + s->dma_address = s->dma_length = 0; + } + + if (unlikely(iommu->need_sync)) + iommu_completion_wait(iommu); + + spin_unlock_irqrestore(&domain->lock, flags); +} + +/* + * The exported alloc_coherent function for dma_ops. + */ +static void *alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_addr, gfp_t flag) +{ + unsigned long flags; + void *virt_addr; + struct amd_iommu *iommu; + struct protection_domain *domain; + u16 devid; + phys_addr_t paddr; + u64 dma_mask = dev->coherent_dma_mask; + + if (!check_device(dev)) + return NULL; + + if (!get_device_resources(dev, &iommu, &domain, &devid)) + flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); + + flag |= __GFP_ZERO; + virt_addr = (void *)__get_free_pages(flag, get_order(size)); + if (!virt_addr) + return 0; + + paddr = virt_to_phys(virt_addr); + + if (!iommu || !domain) { + *dma_addr = (dma_addr_t)paddr; + return virt_addr; + } + + if (!dma_mask) + dma_mask = *dev->dma_mask; + + spin_lock_irqsave(&domain->lock, flags); + + *dma_addr = __map_single(dev, iommu, domain->priv, paddr, + size, DMA_BIDIRECTIONAL, true, dma_mask); + + if (*dma_addr == bad_dma_address) { + free_pages((unsigned long)virt_addr, get_order(size)); + virt_addr = NULL; + goto out; + } + + if (unlikely(iommu->need_sync)) + iommu_completion_wait(iommu); + +out: + spin_unlock_irqrestore(&domain->lock, flags); + + return virt_addr; +} + +/* + * The exported free_coherent function for dma_ops. + */ +static void free_coherent(struct device *dev, size_t size, + void *virt_addr, dma_addr_t dma_addr) +{ + unsigned long flags; + struct amd_iommu *iommu; + struct protection_domain *domain; + u16 devid; + + if (!check_device(dev)) + return; + + get_device_resources(dev, &iommu, &domain, &devid); + + if (!iommu || !domain) + goto free_mem; + + spin_lock_irqsave(&domain->lock, flags); + + __unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL); + + if (unlikely(iommu->need_sync)) + iommu_completion_wait(iommu); + + spin_unlock_irqrestore(&domain->lock, flags); + +free_mem: + free_pages((unsigned long)virt_addr, get_order(size)); +} + +/* + * This function is called by the DMA layer to find out if we can handle a + * particular device. It is part of the dma_ops. + */ +static int amd_iommu_dma_supported(struct device *dev, u64 mask) +{ + u16 bdf; + struct pci_dev *pcidev; + + /* No device or no PCI device */ + if (!dev || dev->bus != &pci_bus_type) + return 0; + + pcidev = to_pci_dev(dev); + + bdf = calc_devid(pcidev->bus->number, pcidev->devfn); + + /* Out of our scope? */ + if (bdf > amd_iommu_last_bdf) + return 0; + + return 1; +} + +/* + * The function for pre-allocating protection domains. + * + * If the driver core informs the DMA layer if a driver grabs a device + * we don't need to preallocate the protection domains anymore. + * For now we have to. + */ +void prealloc_protection_domains(void) +{ + struct pci_dev *dev = NULL; + struct dma_ops_domain *dma_dom; + struct amd_iommu *iommu; + int order = amd_iommu_aperture_order; + u16 devid; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + devid = (dev->bus->number << 8) | dev->devfn; + if (devid > amd_iommu_last_bdf) + continue; + devid = amd_iommu_alias_table[devid]; + if (domain_for_device(devid)) + continue; + iommu = amd_iommu_rlookup_table[devid]; + if (!iommu) + continue; + dma_dom = dma_ops_domain_alloc(iommu, order); + if (!dma_dom) + continue; + init_unity_mappings_for_device(dma_dom, devid); + dma_dom->target_dev = devid; + + list_add_tail(&dma_dom->list, &iommu_pd_list); + } +} + +static struct dma_mapping_ops amd_iommu_dma_ops = { + .alloc_coherent = alloc_coherent, + .free_coherent = free_coherent, + .map_single = map_single, + .unmap_single = unmap_single, + .map_sg = map_sg, + .unmap_sg = unmap_sg, + .dma_supported = amd_iommu_dma_supported, +}; + +/* + * The function which clues the AMD IOMMU driver into dma_ops. + */ +int __init amd_iommu_init_dma_ops(void) +{ + struct amd_iommu *iommu; + int order = amd_iommu_aperture_order; + int ret; + + /* + * first allocate a default protection domain for every IOMMU we + * found in the system. Devices not assigned to any other + * protection domain will be assigned to the default one. + */ + list_for_each_entry(iommu, &amd_iommu_list, list) { + iommu->default_dom = dma_ops_domain_alloc(iommu, order); + if (iommu->default_dom == NULL) + return -ENOMEM; + ret = iommu_init_unity_mappings(iommu); + if (ret) + goto free_domains; + } + + /* + * If device isolation is enabled, pre-allocate the protection + * domains for each device. + */ + if (amd_iommu_isolate) + prealloc_protection_domains(); + + iommu_detected = 1; + force_iommu = 1; + bad_dma_address = 0; +#ifdef CONFIG_GART_IOMMU + gart_iommu_aperture_disabled = 1; + gart_iommu_aperture = 0; +#endif + + /* Make the driver finally visible to the drivers */ + dma_ops = &amd_iommu_dma_ops; + + return 0; + +free_domains: + + list_for_each_entry(iommu, &amd_iommu_list, list) { + if (iommu->default_dom) + dma_ops_domain_free(iommu->default_dom); + } + + return ret; +} diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c new file mode 100644 index 00000000000..4cd8083c58b --- /dev/null +++ b/arch/x86/kernel/amd_iommu_init.c @@ -0,0 +1,1234 @@ +/* + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. + * Author: Joerg Roedel <joerg.roedel@amd.com> + * Leo Duran <leo.duran@amd.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/gfp.h> +#include <linux/list.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/msi.h> +#include <asm/pci-direct.h> +#include <asm/amd_iommu_types.h> +#include <asm/amd_iommu.h> +#include <asm/iommu.h> + +/* + * definitions for the ACPI scanning code + */ +#define IVRS_HEADER_LENGTH 48 + +#define ACPI_IVHD_TYPE 0x10 +#define ACPI_IVMD_TYPE_ALL 0x20 +#define ACPI_IVMD_TYPE 0x21 +#define ACPI_IVMD_TYPE_RANGE 0x22 + +#define IVHD_DEV_ALL 0x01 +#define IVHD_DEV_SELECT 0x02 +#define IVHD_DEV_SELECT_RANGE_START 0x03 +#define IVHD_DEV_RANGE_END 0x04 +#define IVHD_DEV_ALIAS 0x42 +#define IVHD_DEV_ALIAS_RANGE 0x43 +#define IVHD_DEV_EXT_SELECT 0x46 +#define IVHD_DEV_EXT_SELECT_RANGE 0x47 + +#define IVHD_FLAG_HT_TUN_EN 0x00 +#define IVHD_FLAG_PASSPW_EN 0x01 +#define IVHD_FLAG_RESPASSPW_EN 0x02 +#define IVHD_FLAG_ISOC_EN 0x03 + +#define IVMD_FLAG_EXCL_RANGE 0x08 +#define IVMD_FLAG_UNITY_MAP 0x01 + +#define ACPI_DEVFLAG_INITPASS 0x01 +#define ACPI_DEVFLAG_EXTINT 0x02 +#define ACPI_DEVFLAG_NMI 0x04 +#define ACPI_DEVFLAG_SYSMGT1 0x10 +#define ACPI_DEVFLAG_SYSMGT2 0x20 +#define ACPI_DEVFLAG_LINT0 0x40 +#define ACPI_DEVFLAG_LINT1 0x80 +#define ACPI_DEVFLAG_ATSDIS 0x10000000 + +/* + * ACPI table definitions + * + * These data structures are laid over the table to parse the important values + * out of it. + */ + +/* + * structure describing one IOMMU in the ACPI table. Typically followed by one + * or more ivhd_entrys. + */ +struct ivhd_header { + u8 type; + u8 flags; + u16 length; + u16 devid; + u16 cap_ptr; + u64 mmio_phys; + u16 pci_seg; + u16 info; + u32 reserved; +} __attribute__((packed)); + +/* + * A device entry describing which devices a specific IOMMU translates and + * which requestor ids they use. + */ +struct ivhd_entry { + u8 type; + u16 devid; + u8 flags; + u32 ext; +} __attribute__((packed)); + +/* + * An AMD IOMMU memory definition structure. It defines things like exclusion + * ranges for devices and regions that should be unity mapped. + */ +struct ivmd_header { + u8 type; + u8 flags; + u16 length; + u16 devid; + u16 aux; + u64 resv; + u64 range_start; + u64 range_length; +} __attribute__((packed)); + +static int __initdata amd_iommu_detected; + +u16 amd_iommu_last_bdf; /* largest PCI device id we have + to handle */ +LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings + we find in ACPI */ +unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */ +int amd_iommu_isolate; /* if 1, device isolation is enabled */ +bool amd_iommu_unmap_flush; /* if true, flush on every unmap */ + +LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the + system */ + +/* + * Pointer to the device table which is shared by all AMD IOMMUs + * it is indexed by the PCI device id or the HT unit id and contains + * information about the domain the device belongs to as well as the + * page table root pointer. + */ +struct dev_table_entry *amd_iommu_dev_table; + +/* + * The alias table is a driver specific data structure which contains the + * mappings of the PCI device ids to the actual requestor ids on the IOMMU. + * More than one device can share the same requestor id. + */ +u16 *amd_iommu_alias_table; + +/* + * The rlookup table is used to find the IOMMU which is responsible + * for a specific device. It is also indexed by the PCI device id. + */ +struct amd_iommu **amd_iommu_rlookup_table; + +/* + * The pd table (protection domain table) is used to find the protection domain + * data structure a device belongs to. Indexed with the PCI device id too. + */ +struct protection_domain **amd_iommu_pd_table; + +/* + * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap + * to know which ones are already in use. + */ +unsigned long *amd_iommu_pd_alloc_bitmap; + +static u32 dev_table_size; /* size of the device table */ +static u32 alias_table_size; /* size of the alias table */ +static u32 rlookup_table_size; /* size if the rlookup table */ + +static inline void update_last_devid(u16 devid) +{ + if (devid > amd_iommu_last_bdf) + amd_iommu_last_bdf = devid; +} + +static inline unsigned long tbl_size(int entry_size) +{ + unsigned shift = PAGE_SHIFT + + get_order(amd_iommu_last_bdf * entry_size); + + return 1UL << shift; +} + +/**************************************************************************** + * + * AMD IOMMU MMIO register space handling functions + * + * These functions are used to program the IOMMU device registers in + * MMIO space required for that driver. + * + ****************************************************************************/ + +/* + * This function set the exclusion range in the IOMMU. DMA accesses to the + * exclusion range are passed through untranslated + */ +static void __init iommu_set_exclusion_range(struct amd_iommu *iommu) +{ + u64 start = iommu->exclusion_start & PAGE_MASK; + u64 limit = (start + iommu->exclusion_length) & PAGE_MASK; + u64 entry; + + if (!iommu->exclusion_start) + return; + + entry = start | MMIO_EXCL_ENABLE_MASK; + memcpy_toio(iommu->mmio_base + MMIO_EXCL_BASE_OFFSET, + &entry, sizeof(entry)); + + entry = limit; + memcpy_toio(iommu->mmio_base + MMIO_EXCL_LIMIT_OFFSET, + &entry, sizeof(entry)); +} + +/* Programs the physical address of the device table into the IOMMU hardware */ +static void __init iommu_set_device_table(struct amd_iommu *iommu) +{ + u32 entry; + + BUG_ON(iommu->mmio_base == NULL); + + entry = virt_to_phys(amd_iommu_dev_table); + entry |= (dev_table_size >> 12) - 1; + memcpy_toio(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET, + &entry, sizeof(entry)); +} + +/* Generic functions to enable/disable certain features of the IOMMU. */ +static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit) +{ + u32 ctrl; + + ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET); + ctrl |= (1 << bit); + writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); +} + +static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) +{ + u32 ctrl; + + ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET); + ctrl &= ~(1 << bit); + writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); +} + +/* Function to enable the hardware */ +void __init iommu_enable(struct amd_iommu *iommu) +{ + printk(KERN_INFO "AMD IOMMU: Enabling IOMMU " + "at %02x:%02x.%x cap 0x%hx\n", + iommu->dev->bus->number, + PCI_SLOT(iommu->dev->devfn), + PCI_FUNC(iommu->dev->devfn), + iommu->cap_ptr); + + iommu_feature_enable(iommu, CONTROL_IOMMU_EN); +} + +/* Function to enable IOMMU event logging and event interrupts */ +void __init iommu_enable_event_logging(struct amd_iommu *iommu) +{ + iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN); + iommu_feature_enable(iommu, CONTROL_EVT_INT_EN); +} + +/* + * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in + * the system has one. + */ +static u8 * __init iommu_map_mmio_space(u64 address) +{ + u8 *ret; + + if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu")) + return NULL; + + ret = ioremap_nocache(address, MMIO_REGION_LENGTH); + if (ret != NULL) + return ret; + + release_mem_region(address, MMIO_REGION_LENGTH); + + return NULL; +} + +static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu) +{ + if (iommu->mmio_base) + iounmap(iommu->mmio_base); + release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH); +} + +/**************************************************************************** + * + * The functions below belong to the first pass of AMD IOMMU ACPI table + * parsing. In this pass we try to find out the highest device id this + * code has to handle. Upon this information the size of the shared data + * structures is determined later. + * + ****************************************************************************/ + +/* + * This function calculates the length of a given IVHD entry + */ +static inline int ivhd_entry_length(u8 *ivhd) +{ + return 0x04 << (*ivhd >> 6); +} + +/* + * This function reads the last device id the IOMMU has to handle from the PCI + * capability header for this IOMMU + */ +static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr) +{ + u32 cap; + + cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET); + update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap))); + + return 0; +} + +/* + * After reading the highest device id from the IOMMU PCI capability header + * this function looks if there is a higher device id defined in the ACPI table + */ +static int __init find_last_devid_from_ivhd(struct ivhd_header *h) +{ + u8 *p = (void *)h, *end = (void *)h; + struct ivhd_entry *dev; + + p += sizeof(*h); + end += h->length; + + find_last_devid_on_pci(PCI_BUS(h->devid), + PCI_SLOT(h->devid), + PCI_FUNC(h->devid), + h->cap_ptr); + + while (p < end) { + dev = (struct ivhd_entry *)p; + switch (dev->type) { + case IVHD_DEV_SELECT: + case IVHD_DEV_RANGE_END: + case IVHD_DEV_ALIAS: + case IVHD_DEV_EXT_SELECT: + /* all the above subfield types refer to device ids */ + update_last_devid(dev->devid); + break; + default: + break; + } + p += ivhd_entry_length(p); + } + + WARN_ON(p != end); + + return 0; +} + +/* + * Iterate over all IVHD entries in the ACPI table and find the highest device + * id which we need to handle. This is the first of three functions which parse + * the ACPI table. So we check the checksum here. + */ +static int __init find_last_devid_acpi(struct acpi_table_header *table) +{ + int i; + u8 checksum = 0, *p = (u8 *)table, *end = (u8 *)table; + struct ivhd_header *h; + + /* + * Validate checksum here so we don't need to do it when + * we actually parse the table + */ + for (i = 0; i < table->length; ++i) + checksum += p[i]; + if (checksum != 0) + /* ACPI table corrupt */ + return -ENODEV; + + p += IVRS_HEADER_LENGTH; + + end += table->length; + while (p < end) { + h = (struct ivhd_header *)p; + switch (h->type) { + case ACPI_IVHD_TYPE: + find_last_devid_from_ivhd(h); + break; + default: + break; + } + p += h->length; + } + WARN_ON(p != end); + + return 0; +} + +/**************************************************************************** + * + * The following functions belong the the code path which parses the ACPI table + * the second time. In this ACPI parsing iteration we allocate IOMMU specific + * data structures, initialize the device/alias/rlookup table and also + * basically initialize the hardware. + * + ****************************************************************************/ + +/* + * Allocates the command buffer. This buffer is per AMD IOMMU. We can + * write commands to that buffer later and the IOMMU will execute them + * asynchronously + */ +static u8 * __init alloc_command_buffer(struct amd_iommu *iommu) +{ + u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(CMD_BUFFER_SIZE)); + u64 entry; + + if (cmd_buf == NULL) + return NULL; + + iommu->cmd_buf_size = CMD_BUFFER_SIZE; + + entry = (u64)virt_to_phys(cmd_buf); + entry |= MMIO_CMD_SIZE_512; + memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET, + &entry, sizeof(entry)); + + iommu_feature_enable(iommu, CONTROL_CMDBUF_EN); + + return cmd_buf; +} + +static void __init free_command_buffer(struct amd_iommu *iommu) +{ + free_pages((unsigned long)iommu->cmd_buf, + get_order(iommu->cmd_buf_size)); +} + +/* allocates the memory where the IOMMU will log its events to */ +static u8 * __init alloc_event_buffer(struct amd_iommu *iommu) +{ + u64 entry; + iommu->evt_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(EVT_BUFFER_SIZE)); + + if (iommu->evt_buf == NULL) + return NULL; + + entry = (u64)virt_to_phys(iommu->evt_buf) | EVT_LEN_MASK; + memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET, + &entry, sizeof(entry)); + + iommu->evt_buf_size = EVT_BUFFER_SIZE; + + return iommu->evt_buf; +} + +static void __init free_event_buffer(struct amd_iommu *iommu) +{ + free_pages((unsigned long)iommu->evt_buf, get_order(EVT_BUFFER_SIZE)); +} + +/* sets a specific bit in the device table entry. */ +static void set_dev_entry_bit(u16 devid, u8 bit) +{ + int i = (bit >> 5) & 0x07; + int _bit = bit & 0x1f; + + amd_iommu_dev_table[devid].data[i] |= (1 << _bit); +} + +/* Writes the specific IOMMU for a device into the rlookup table */ +static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) +{ + amd_iommu_rlookup_table[devid] = iommu; +} + +/* + * This function takes the device specific flags read from the ACPI + * table and sets up the device table entry with that information + */ +static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu, + u16 devid, u32 flags, u32 ext_flags) +{ + if (flags & ACPI_DEVFLAG_INITPASS) + set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS); + if (flags & ACPI_DEVFLAG_EXTINT) + set_dev_entry_bit(devid, DEV_ENTRY_EINT_PASS); + if (flags & ACPI_DEVFLAG_NMI) + set_dev_entry_bit(devid, DEV_ENTRY_NMI_PASS); + if (flags & ACPI_DEVFLAG_SYSMGT1) + set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1); + if (flags & ACPI_DEVFLAG_SYSMGT2) + set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2); + if (flags & ACPI_DEVFLAG_LINT0) + set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS); + if (flags & ACPI_DEVFLAG_LINT1) + set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS); + + set_iommu_for_device(iommu, devid); +} + +/* + * Reads the device exclusion range from ACPI and initialize IOMMU with + * it + */ +static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) +{ + struct amd_iommu *iommu = amd_iommu_rlookup_table[devid]; + + if (!(m->flags & IVMD_FLAG_EXCL_RANGE)) + return; + + if (iommu) { + /* + * We only can configure exclusion ranges per IOMMU, not + * per device. But we can enable the exclusion range per + * device. This is done here + */ + set_dev_entry_bit(m->devid, DEV_ENTRY_EX); + iommu->exclusion_start = m->range_start; + iommu->exclusion_length = m->range_length; + } +} + +/* + * This function reads some important data from the IOMMU PCI space and + * initializes the driver data structure with it. It reads the hardware + * capabilities and the first/last device entries + */ +static void __init init_iommu_from_pci(struct amd_iommu *iommu) +{ + int cap_ptr = iommu->cap_ptr; + u32 range, misc; + + pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET, + &iommu->cap); + pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET, + &range); + pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET, + &misc); + + iommu->first_device = calc_devid(MMIO_GET_BUS(range), + MMIO_GET_FD(range)); + iommu->last_device = calc_devid(MMIO_GET_BUS(range), + MMIO_GET_LD(range)); + iommu->evt_msi_num = MMIO_MSI_NUM(misc); +} + +/* + * Takes a pointer to an AMD IOMMU entry in the ACPI table and + * initializes the hardware and our data structures with it. + */ +static void __init init_iommu_from_acpi(struct amd_iommu *iommu, + struct ivhd_header *h) +{ + u8 *p = (u8 *)h; + u8 *end = p, flags = 0; + u16 dev_i, devid = 0, devid_start = 0, devid_to = 0; + u32 ext_flags = 0; + bool alias = false; + struct ivhd_entry *e; + + /* + * First set the recommended feature enable bits from ACPI + * into the IOMMU control registers + */ + h->flags & IVHD_FLAG_HT_TUN_EN ? + iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : + iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); + + h->flags & IVHD_FLAG_PASSPW_EN ? + iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : + iommu_feature_disable(iommu, CONTROL_PASSPW_EN); + + h->flags & IVHD_FLAG_RESPASSPW_EN ? + iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : + iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); + + h->flags & IVHD_FLAG_ISOC_EN ? + iommu_feature_enable(iommu, CONTROL_ISOC_EN) : + iommu_feature_disable(iommu, CONTROL_ISOC_EN); + + /* + * make IOMMU memory accesses cache coherent + */ + iommu_feature_enable(iommu, CONTROL_COHERENT_EN); + + /* + * Done. Now parse the device entries + */ + p += sizeof(struct ivhd_header); + end += h->length; + + while (p < end) { + e = (struct ivhd_entry *)p; + switch (e->type) { + case IVHD_DEV_ALL: + for (dev_i = iommu->first_device; + dev_i <= iommu->last_device; ++dev_i) + set_dev_entry_from_acpi(iommu, dev_i, + e->flags, 0); + break; + case IVHD_DEV_SELECT: + devid = e->devid; + set_dev_entry_from_acpi(iommu, devid, e->flags, 0); + break; + case IVHD_DEV_SELECT_RANGE_START: + devid_start = e->devid; + flags = e->flags; + ext_flags = 0; + alias = false; + break; + case IVHD_DEV_ALIAS: + devid = e->devid; + devid_to = e->ext >> 8; + set_dev_entry_from_acpi(iommu, devid, e->flags, 0); + amd_iommu_alias_table[devid] = devid_to; + break; + case IVHD_DEV_ALIAS_RANGE: + devid_start = e->devid; + flags = e->flags; + devid_to = e->ext >> 8; + ext_flags = 0; + alias = true; + break; + case IVHD_DEV_EXT_SELECT: + devid = e->devid; + set_dev_entry_from_acpi(iommu, devid, e->flags, + e->ext); + break; + case IVHD_DEV_EXT_SELECT_RANGE: + devid_start = e->devid; + flags = e->flags; + ext_flags = e->ext; + alias = false; + break; + case IVHD_DEV_RANGE_END: + devid = e->devid; + for (dev_i = devid_start; dev_i <= devid; ++dev_i) { + if (alias) + amd_iommu_alias_table[dev_i] = devid_to; + set_dev_entry_from_acpi(iommu, + amd_iommu_alias_table[dev_i], + flags, ext_flags); + } + break; + default: + break; + } + + p += ivhd_entry_length(p); + } +} + +/* Initializes the device->iommu mapping for the driver */ +static int __init init_iommu_devices(struct amd_iommu *iommu) +{ + u16 i; + + for (i = iommu->first_device; i <= iommu->last_device; ++i) + set_iommu_for_device(iommu, i); + + return 0; +} + +static void __init free_iommu_one(struct amd_iommu *iommu) +{ + free_command_buffer(iommu); + free_event_buffer(iommu); + iommu_unmap_mmio_space(iommu); +} + +static void __init free_iommu_all(void) +{ + struct amd_iommu *iommu, *next; + + list_for_each_entry_safe(iommu, next, &amd_iommu_list, list) { + list_del(&iommu->list); + free_iommu_one(iommu); + kfree(iommu); + } +} + +/* + * This function clues the initialization function for one IOMMU + * together and also allocates the command buffer and programs the + * hardware. It does NOT enable the IOMMU. This is done afterwards. + */ +static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h) +{ + spin_lock_init(&iommu->lock); + list_add_tail(&iommu->list, &amd_iommu_list); + + /* + * Copy data from ACPI table entry to the iommu struct + */ + iommu->dev = pci_get_bus_and_slot(PCI_BUS(h->devid), h->devid & 0xff); + if (!iommu->dev) + return 1; + + iommu->cap_ptr = h->cap_ptr; + iommu->pci_seg = h->pci_seg; + iommu->mmio_phys = h->mmio_phys; + iommu->mmio_base = iommu_map_mmio_space(h->mmio_phys); + if (!iommu->mmio_base) + return -ENOMEM; + + iommu_set_device_table(iommu); + iommu->cmd_buf = alloc_command_buffer(iommu); + if (!iommu->cmd_buf) + return -ENOMEM; + + iommu->evt_buf = alloc_event_buffer(iommu); + if (!iommu->evt_buf) + return -ENOMEM; + + iommu->int_enabled = false; + + init_iommu_from_pci(iommu); + init_iommu_from_acpi(iommu, h); + init_iommu_devices(iommu); + + return pci_enable_device(iommu->dev); +} + +/* + * Iterates over all IOMMU entries in the ACPI table, allocates the + * IOMMU structure and initializes it with init_iommu_one() + */ +static int __init init_iommu_all(struct acpi_table_header *table) +{ + u8 *p = (u8 *)table, *end = (u8 *)table; + struct ivhd_header *h; + struct amd_iommu *iommu; + int ret; + + end += table->length; + p += IVRS_HEADER_LENGTH; + + while (p < end) { + h = (struct ivhd_header *)p; + switch (*p) { + case ACPI_IVHD_TYPE: + iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL); + if (iommu == NULL) + return -ENOMEM; + ret = init_iommu_one(iommu, h); + if (ret) + return ret; + break; + default: + break; + } + p += h->length; + + } + WARN_ON(p != end); + + return 0; +} + +/**************************************************************************** + * + * The following functions initialize the MSI interrupts for all IOMMUs + * in the system. Its a bit challenging because there could be multiple + * IOMMUs per PCI BDF but we can call pci_enable_msi(x) only once per + * pci_dev. + * + ****************************************************************************/ + +static int __init iommu_setup_msix(struct amd_iommu *iommu) +{ + struct amd_iommu *curr; + struct msix_entry entries[32]; /* only 32 supported by AMD IOMMU */ + int nvec = 0, i; + + list_for_each_entry(curr, &amd_iommu_list, list) { + if (curr->dev == iommu->dev) { + entries[nvec].entry = curr->evt_msi_num; + entries[nvec].vector = 0; + curr->int_enabled = true; + nvec++; + } + } + + if (pci_enable_msix(iommu->dev, entries, nvec)) { + pci_disable_msix(iommu->dev); + return 1; + } + + for (i = 0; i < nvec; ++i) { + int r = request_irq(entries->vector, amd_iommu_int_handler, + IRQF_SAMPLE_RANDOM, + "AMD IOMMU", + NULL); + if (r) + goto out_free; + } + + return 0; + +out_free: + for (i -= 1; i >= 0; --i) + free_irq(entries->vector, NULL); + + pci_disable_msix(iommu->dev); + + return 1; +} + +static int __init iommu_setup_msi(struct amd_iommu *iommu) +{ + int r; + struct amd_iommu *curr; + + list_for_each_entry(curr, &amd_iommu_list, list) { + if (curr->dev == iommu->dev) + curr->int_enabled = true; + } + + + if (pci_enable_msi(iommu->dev)) + return 1; + + r = request_irq(iommu->dev->irq, amd_iommu_int_handler, + IRQF_SAMPLE_RANDOM, + "AMD IOMMU", + NULL); + + if (r) { + pci_disable_msi(iommu->dev); + return 1; + } + + return 0; +} + +static int __init iommu_init_msi(struct amd_iommu *iommu) +{ + if (iommu->int_enabled) + return 0; + + if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSIX)) + return iommu_setup_msix(iommu); + else if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSI)) + return iommu_setup_msi(iommu); + + return 1; +} + +/**************************************************************************** + * + * The next functions belong to the third pass of parsing the ACPI + * table. In this last pass the memory mapping requirements are + * gathered (like exclusion and unity mapping reanges). + * + ****************************************************************************/ + +static void __init free_unity_maps(void) +{ + struct unity_map_entry *entry, *next; + + list_for_each_entry_safe(entry, next, &amd_iommu_unity_map, list) { + list_del(&entry->list); + kfree(entry); + } +} + +/* called when we find an exclusion range definition in ACPI */ +static int __init init_exclusion_range(struct ivmd_header *m) +{ + int i; + + switch (m->type) { + case ACPI_IVMD_TYPE: + set_device_exclusion_range(m->devid, m); + break; + case ACPI_IVMD_TYPE_ALL: + for (i = 0; i <= amd_iommu_last_bdf; ++i) + set_device_exclusion_range(i, m); + break; + case ACPI_IVMD_TYPE_RANGE: + for (i = m->devid; i <= m->aux; ++i) + set_device_exclusion_range(i, m); + break; + default: + break; + } + + return 0; +} + +/* called for unity map ACPI definition */ +static int __init init_unity_map_range(struct ivmd_header *m) +{ + struct unity_map_entry *e = 0; + + e = kzalloc(sizeof(*e), GFP_KERNEL); + if (e == NULL) + return -ENOMEM; + + switch (m->type) { + default: + case ACPI_IVMD_TYPE: + e->devid_start = e->devid_end = m->devid; + break; + case ACPI_IVMD_TYPE_ALL: + e->devid_start = 0; + e->devid_end = amd_iommu_last_bdf; + break; + case ACPI_IVMD_TYPE_RANGE: + e->devid_start = m->devid; + e->devid_end = m->aux; + break; + } + e->address_start = PAGE_ALIGN(m->range_start); + e->address_end = e->address_start + PAGE_ALIGN(m->range_length); + e->prot = m->flags >> 1; + + list_add_tail(&e->list, &amd_iommu_unity_map); + + return 0; +} + +/* iterates over all memory definitions we find in the ACPI table */ +static int __init init_memory_definitions(struct acpi_table_header *table) +{ + u8 *p = (u8 *)table, *end = (u8 *)table; + struct ivmd_header *m; + + end += table->length; + p += IVRS_HEADER_LENGTH; + + while (p < end) { + m = (struct ivmd_header *)p; + if (m->flags & IVMD_FLAG_EXCL_RANGE) + init_exclusion_range(m); + else if (m->flags & IVMD_FLAG_UNITY_MAP) + init_unity_map_range(m); + + p += m->length; + } + + return 0; +} + +/* + * Init the device table to not allow DMA access for devices and + * suppress all page faults + */ +static void init_device_table(void) +{ + u16 devid; + + for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) { + set_dev_entry_bit(devid, DEV_ENTRY_VALID); + set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION); + } +} + +/* + * This function finally enables all IOMMUs found in the system after + * they have been initialized + */ +static void __init enable_iommus(void) +{ + struct amd_iommu *iommu; + + list_for_each_entry(iommu, &amd_iommu_list, list) { + iommu_set_exclusion_range(iommu); + iommu_init_msi(iommu); + iommu_enable_event_logging(iommu); + iommu_enable(iommu); + } +} + +/* + * Suspend/Resume support + * disable suspend until real resume implemented + */ + +static int amd_iommu_resume(struct sys_device *dev) +{ + return 0; +} + +static int amd_iommu_suspend(struct sys_device *dev, pm_message_t state) +{ + return -EINVAL; +} + +static struct sysdev_class amd_iommu_sysdev_class = { + .name = "amd_iommu", + .suspend = amd_iommu_suspend, + .resume = amd_iommu_resume, +}; + +static struct sys_device device_amd_iommu = { + .id = 0, + .cls = &amd_iommu_sysdev_class, +}; + +/* + * This is the core init function for AMD IOMMU hardware in the system. + * This function is called from the generic x86 DMA layer initialization + * code. + * + * This function basically parses the ACPI table for AMD IOMMU (IVRS) + * three times: + * + * 1 pass) Find the highest PCI device id the driver has to handle. + * Upon this information the size of the data structures is + * determined that needs to be allocated. + * + * 2 pass) Initialize the data structures just allocated with the + * information in the ACPI table about available AMD IOMMUs + * in the system. It also maps the PCI devices in the + * system to specific IOMMUs + * + * 3 pass) After the basic data structures are allocated and + * initialized we update them with information about memory + * remapping requirements parsed out of the ACPI table in + * this last pass. + * + * After that the hardware is initialized and ready to go. In the last + * step we do some Linux specific things like registering the driver in + * the dma_ops interface and initializing the suspend/resume support + * functions. Finally it prints some information about AMD IOMMUs and + * the driver state and enables the hardware. + */ +int __init amd_iommu_init(void) +{ + int i, ret = 0; + + + if (no_iommu) { + printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n"); + return 0; + } + + if (!amd_iommu_detected) + return -ENODEV; + + /* + * First parse ACPI tables to find the largest Bus/Dev/Func + * we need to handle. Upon this information the shared data + * structures for the IOMMUs in the system will be allocated + */ + if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0) + return -ENODEV; + + dev_table_size = tbl_size(DEV_TABLE_ENTRY_SIZE); + alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE); + rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE); + + ret = -ENOMEM; + + /* Device table - directly used by all IOMMUs */ + amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(dev_table_size)); + if (amd_iommu_dev_table == NULL) + goto out; + + /* + * Alias table - map PCI Bus/Dev/Func to Bus/Dev/Func the + * IOMMU see for that device + */ + amd_iommu_alias_table = (void *)__get_free_pages(GFP_KERNEL, + get_order(alias_table_size)); + if (amd_iommu_alias_table == NULL) + goto free; + + /* IOMMU rlookup table - find the IOMMU for a specific device */ + amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL, + get_order(rlookup_table_size)); + if (amd_iommu_rlookup_table == NULL) + goto free; + + /* + * Protection Domain table - maps devices to protection domains + * This table has the same size as the rlookup_table + */ + amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(rlookup_table_size)); + if (amd_iommu_pd_table == NULL) + goto free; + + amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages( + GFP_KERNEL | __GFP_ZERO, + get_order(MAX_DOMAIN_ID/8)); + if (amd_iommu_pd_alloc_bitmap == NULL) + goto free; + + /* init the device table */ + init_device_table(); + + /* + * let all alias entries point to itself + */ + for (i = 0; i <= amd_iommu_last_bdf; ++i) + amd_iommu_alias_table[i] = i; + + /* + * never allocate domain 0 because its used as the non-allocated and + * error value placeholder + */ + amd_iommu_pd_alloc_bitmap[0] = 1; + + /* + * now the data structures are allocated and basically initialized + * start the real acpi table scan + */ + ret = -ENODEV; + if (acpi_table_parse("IVRS", init_iommu_all) != 0) + goto free; + + if (acpi_table_parse("IVRS", init_memory_definitions) != 0) + goto free; + + ret = sysdev_class_register(&amd_iommu_sysdev_class); + if (ret) + goto free; + + ret = sysdev_register(&device_amd_iommu); + if (ret) + goto free; + + ret = amd_iommu_init_dma_ops(); + if (ret) + goto free; + + enable_iommus(); + + printk(KERN_INFO "AMD IOMMU: aperture size is %d MB\n", + (1 << (amd_iommu_aperture_order-20))); + + printk(KERN_INFO "AMD IOMMU: device isolation "); + if (amd_iommu_isolate) + printk("enabled\n"); + else + printk("disabled\n"); + + if (amd_iommu_unmap_flush) + printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n"); + else + printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n"); + +out: + return ret; + +free: + free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, + get_order(MAX_DOMAIN_ID/8)); + + free_pages((unsigned long)amd_iommu_pd_table, + get_order(rlookup_table_size)); + + free_pages((unsigned long)amd_iommu_rlookup_table, + get_order(rlookup_table_size)); + + free_pages((unsigned long)amd_iommu_alias_table, + get_order(alias_table_size)); + + free_pages((unsigned long)amd_iommu_dev_table, + get_order(dev_table_size)); + + free_iommu_all(); + + free_unity_maps(); + + goto out; +} + +/**************************************************************************** + * + * Early detect code. This code runs at IOMMU detection time in the DMA + * layer. It just looks if there is an IVRS ACPI table to detect AMD + * IOMMUs + * + ****************************************************************************/ +static int __init early_amd_iommu_detect(struct acpi_table_header *table) +{ + return 0; +} + +void __init amd_iommu_detect(void) +{ + if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture)) + return; + + if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) { + iommu_detected = 1; + amd_iommu_detected = 1; +#ifdef CONFIG_GART_IOMMU + gart_iommu_aperture_disabled = 1; + gart_iommu_aperture = 0; +#endif + } +} + +/**************************************************************************** + * + * Parsing functions for the AMD IOMMU specific kernel command line + * options. + * + ****************************************************************************/ + +static int __init parse_amd_iommu_options(char *str) +{ + for (; *str; ++str) { + if (strncmp(str, "isolate", 7) == 0) + amd_iommu_isolate = 1; + if (strncmp(str, "fullflush", 11) == 0) + amd_iommu_unmap_flush = true; + } + + return 1; +} + +static int __init parse_amd_iommu_size_options(char *str) +{ + unsigned order = PAGE_SHIFT + get_order(memparse(str, &str)); + + if ((order > 24) && (order < 31)) + amd_iommu_aperture_order = order; + + return 1; +} + +__setup("amd_iommu=", parse_amd_iommu_options); +__setup("amd_iommu_size=", parse_amd_iommu_size_options); diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e00..9a32b37ee2e 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -21,6 +21,7 @@ #include <linux/suspend.h> #include <asm/e820.h> #include <asm/io.h> +#include <asm/iommu.h> #include <asm/gart.h> #include <asm/pci-direct.h> #include <asm/dma.h> @@ -35,6 +36,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -55,8 +68,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +79,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", @@ -83,69 +110,53 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -155,14 +166,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -180,17 +203,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -199,17 +222,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -249,36 +272,50 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int i, fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; - int aper_enabled = 0, last_aper_enabled = 0; + int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0; if (!early_pci_allowed()) return; + /* This is mostly duplicate of iommu_hole_init */ fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if (last_valid) { + if ((aper_order != last_aper_order) || + (aper_base != last_aper_base) || + (aper_enabled != last_aper_enabled)) { + fix = 1; + break; + } + } + + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; + last_valid = 1; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } if (!fix && !aper_enabled) @@ -290,32 +327,46 @@ void __init early_gart_iommu_check(void) if (gart_fix_e820 && !fix && aper_enabled) { if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); - add_memory_region(aper_base, aper_size, E820_RESERVED); + e820_add_region(aper_base, aper_size, E820_RESERVED); update_e820(); } - return; } + if (!fix) + return; + /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -323,38 +374,65 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - gart_iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; - - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; - } + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + iommu_detected = 1; + gart_iommu_aperture = 1; + + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && + max_pfn > MAX_DMA32_PFN && + !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; + } + } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -364,22 +442,24 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ } else if (swiotlb && !valid_agp) { /* Do nothing */ - } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) || + } else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) || force_iommu || valid_agp || fallback_aper_force) { - printk(KERN_ERR + printk(KERN_INFO "Your BIOS doesn't leave a aperture memory hole\n"); - printk(KERN_ERR + printk(KERN_INFO "Please enable the IOMMU option in the BIOS setup\n"); - printk(KERN_ERR + printk(KERN_INFO "This costs you %d MB of RAM\n", 32 << fallback_aper_order); @@ -401,16 +481,24 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } + + set_up_gart_resume(aper_order, aper_alloc); } diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6..a91c57cb666 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -52,29 +52,38 @@ unsigned long mp_lapic_addr; -DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - /* * Knob to control our willingness to enable the local APIC. * - * -1=force-disable, +1=force-enable + * +1=force-enable */ -static int enable_local_apic __initdata; +static int force_enable_local_apic; +int disable_apic; -/* Local APIC timer verification ok */ -static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int disable_apic_timer __cpuinitdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Debug level, exported for io_apic.c */ -int apic_verbosity; +unsigned int apic_verbosity; + +int pic_mode; + +/* Have we found an MP table */ +int smp_found_config; + +static struct resource lapic_resource = { + .name = "Local APIC", + .flags = IORESOURCE_MEM | IORESOURCE_BUSY, +}; static unsigned int calibration_result; @@ -119,7 +128,11 @@ static inline int lapic_get_version(void) */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 + return 1; +#else return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -134,13 +147,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -156,17 +174,49 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ void __cpuinit enable_NMI_through_LVT0(void) { - unsigned int v = APIC_DM_NMI; + unsigned int v; + + /* unmask and set to NMI */ + v = APIC_DM_NMI; - /* Level triggered for 82489DX */ + /* Level triggered for 82489DX (32bit mode) */ if (!lapic_is_integrated()) v |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT0, v); + + apic_write(APIC_LVT0, v); } /** @@ -182,9 +232,13 @@ int get_physical_broadcast(void) */ int lapic_get_maxlvt(void) { - unsigned int v = apic_read(APIC_LVR); + unsigned int v; - /* 82489DXs do not report # of LVT entries. */ + v = apic_read(APIC_LVR); + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } @@ -192,8 +246,12 @@ int lapic_get_maxlvt(void) * Local APIC timer */ -/* Clock divisor is set to 16 */ +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else #define APIC_DIVISOR 16 +#endif /* * This function sets up the local APIC timer, with a timeout of @@ -218,18 +276,48 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) if (!irqen) lvtt_value |= APIC_LVT_MASKED; - apic_write_around(APIC_LVTT, lvtt_value); + apic_write(APIC_LVTT, lvtt_value); /* * Divide PICLK by 16 */ tmp_value = apic_read(APIC_TDCR); - apic_write_around(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); + apic_write(APIC_TDCR, + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); + apic_write(APIC_TMICT, clocks / APIC_DIVISOR); +} + +/* + * Setup extended LVT, AMD specific (K8, family 10h) + * + * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and + * MCE interrupts are supported. Thus MCE offset must be set to 0. + */ + +#define APIC_EILVT_LVTOFF_MCE 0 +#define APIC_EILVT_LVTOFF_IBS 1 + +static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) +{ + unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + + apic_write(reg, v); +} + +u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_MCE; +} + +u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_IBS; } /* @@ -238,7 +326,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) static int lapic_next_event(unsigned long delta, struct clock_event_device *evt) { - apic_write_around(APIC_TMICT, delta); + apic_write(APIC_TMICT, delta); return 0; } @@ -251,8 +339,8 @@ static void lapic_timer_setup(enum clock_event_mode mode, unsigned long flags; unsigned int v; - /* Lapic used for broadcast ? */ - if (!local_apic_timer_verify_ok) + /* Lapic used as dummy for broadcast ? */ + if (evt->features & CLOCK_EVT_FEAT_DUMMY) return; local_irq_save(flags); @@ -267,7 +355,7 @@ static void lapic_timer_setup(enum clock_event_mode mode, case CLOCK_EVT_MODE_SHUTDOWN: v = apic_read(APIC_LVTT); v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); + apic_write(APIC_LVTT, v); break; case CLOCK_EVT_MODE_RESUME: /* Nothing to do here */ @@ -361,12 +449,7 @@ static void __init lapic_cal_handler(struct clock_event_device *dev) } } -/* - * Setup the boot APIC - * - * Calibrate and verify the result. - */ -void __init setup_boot_APIC_clock(void) +static int __init calibrate_APIC_clock(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); const long pm_100ms = PMTMR_TICKS_PER_SEC/10; @@ -376,24 +459,6 @@ void __init setup_boot_APIC_clock(void) long delta, deltapm; int pm_referenced = 0; - /* - * The local apic timer can be disabled via the kernel - * commandline or from the CPU detection code. Register the lapic - * timer as a dummy clock event source on SMP systems, so the - * broadcast mechanism is used. On UP systems simply ignore it. - */ - if (local_apic_timer_disabled) { - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) { - lapic_clockevent.mult = 1; - setup_APIC_timer(); - } - return; - } - - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" - "calibrating APIC timer ...\n"); - local_irq_disable(); /* Replace the global interrupt handler */ @@ -478,8 +543,6 @@ void __init setup_boot_APIC_clock(void) calibration_result / (1000000 / HZ), calibration_result % (1000000 / HZ)); - local_apic_timer_verify_ok = 1; - /* * Do a sanity check on the APIC calibration result */ @@ -487,12 +550,11 @@ void __init setup_boot_APIC_clock(void) local_irq_enable(); printk(KERN_WARNING "APIC frequency too slow, disabling apic timer\n"); - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) - setup_APIC_timer(); - return; + return -1; } + levt->features &= ~CLOCK_EVT_FEAT_DUMMY; + /* We trust the pm timer based calibration */ if (!pm_referenced) { apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); @@ -525,29 +587,63 @@ void __init setup_boot_APIC_clock(void) if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); else - local_apic_timer_verify_ok = 0; + levt->features |= CLOCK_EVT_FEAT_DUMMY; } else local_irq_enable(); - if (!local_apic_timer_verify_ok) { + if (levt->features & CLOCK_EVT_FEAT_DUMMY) { printk(KERN_WARNING "APIC timer disabled due to verification failure.\n"); + return -1; + } + + return 0; +} + +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) +{ + /* + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. + */ + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); /* No broadcast on UP ! */ - if (num_possible_cpus() == 1) - return; - } else { - /* - * If nmi_watchdog is set to IO_APIC, we need the - * PIT/HPET going. Otherwise register lapic as a dummy - * device. - */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - printk(KERN_WARNING "APIC timer registered as dummy," - " due to nmi_watchdog=1!\n"); + if (num_possible_cpus() > 1) { + lapic_clockevent.mult = 1; + setup_APIC_timer(); + } + return; } + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + + if (calibrate_APIC_clock()) { + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) + setup_APIC_timer(); + return; + } + + /* + * If nmi_watchdog is set to IO_APIC, we need the + * PIT/HPET going. Otherwise register lapic as a dummy + * device. + */ + if (nmi_watchdog != NMI_IO_APIC) + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + else + printk(KERN_WARNING "APIC timer registered as dummy," + " due to nmi_watchdog=%d!\n", nmi_watchdog); + /* Setup the lapic or request the broadcast */ setup_APIC_timer(); } @@ -587,7 +683,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 + add_pda(apic_timer_irqs, 1); +#else per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -627,35 +727,6 @@ int setup_profiling_timer(unsigned int multiplier) } /* - * Setup extended LVT, AMD specific (K8, family 10h) - * - * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and - * MCE interrupts are supported. Thus MCE offset must be set to 0. - */ - -#define APIC_EILVT_LVTOFF_MCE 0 -#define APIC_EILVT_LVTOFF_IBS 1 - -static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) -{ - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_MCE; -} - -u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_IBS; -} - -/* * Local APIC start and shutdown */ @@ -682,45 +753,41 @@ void clear_local_APIC(void) */ if (maxlvt >= 3) { v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ - apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED); + apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); } /* * Careful: we have to set masks only first to deassert * any level-triggered sources. */ v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); + apic_write(APIC_LVTT, v | APIC_LVT_MASKED); v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); v = apic_read(APIC_LVT1); - apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED); + apic_write(APIC_LVT1, v | APIC_LVT_MASKED); if (maxlvt >= 4) { v = apic_read(APIC_LVTPC); - apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); + apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); } /* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); - apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED); + apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); } #endif /* * Clean APIC state for other OSs: */ - apic_write_around(APIC_LVTT, APIC_LVT_MASKED); - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - apic_write_around(APIC_LVT1, APIC_LVT_MASKED); + apic_write(APIC_LVTT, APIC_LVT_MASKED); + apic_write(APIC_LVT0, APIC_LVT_MASKED); + apic_write(APIC_LVT1, APIC_LVT_MASKED); if (maxlvt >= 3) - apic_write_around(APIC_LVTERR, APIC_LVT_MASKED); + apic_write(APIC_LVTERR, APIC_LVT_MASKED); if (maxlvt >= 4) - apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); + apic_write(APIC_LVTPC, APIC_LVT_MASKED); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif /* Integrated APIC (!82489DX) ? */ if (lapic_is_integrated()) { if (maxlvt > 3) @@ -735,7 +802,7 @@ void clear_local_APIC(void) */ void disable_local_APIC(void) { - unsigned long value; + unsigned int value; clear_local_APIC(); @@ -745,8 +812,9 @@ void disable_local_APIC(void) */ value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; - apic_write_around(APIC_SPIV, value); + apic_write(APIC_SPIV, value); +#ifdef CONFIG_X86_32 /* * When LAPIC was disabled by the BIOS and enabled by the kernel, * restore the disabled state. @@ -758,6 +826,7 @@ void disable_local_APIC(void) l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); } +#endif } /* @@ -774,11 +843,15 @@ void lapic_shutdown(void) return; local_irq_save(flags); - clear_local_APIC(); - if (enabled_via_apicbase) +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif disable_local_APIC(); + local_irq_restore(flags); } @@ -823,6 +896,12 @@ int __init verify_local_APIC(void) */ reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); + reg1 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); + apic_write(APIC_ID, reg0); + if (reg1 != (reg0 ^ APIC_ID_MASK)) + return 0; /* * The next two are just to see if we have sane values. @@ -848,14 +927,15 @@ void __init sync_Arb_IDs(void) */ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; + /* * Wait for idle. */ apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -863,7 +943,7 @@ void __init sync_Arb_IDs(void) */ void __init init_bsp_APIC(void) { - unsigned long value; + unsigned int value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -884,29 +964,41 @@ void __init init_bsp_APIC(void) value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; +#ifdef CONFIG_X86_32 /* This bit is reserved on P4/Xeon and should be cleared */ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else +#endif value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; - apic_write_around(APIC_SPIV, value); + apic_write(APIC_SPIV, value); /* * Set up the virtual wire mode. */ - apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + apic_write(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; if (!lapic_is_integrated()) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); + apic_write(APIC_LVT1, value); } static void __cpuinit lapic_setup_esr(void) { unsigned long oldvalue, value, maxlvt; if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } /* !82489DX */ maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ @@ -915,7 +1007,7 @@ static void __cpuinit lapic_setup_esr(void) /* enables sending errors */ value = ERROR_APIC_VECTOR; - apic_write_around(APIC_LVTERR, value); + apic_write(APIC_LVTERR, value); /* * spec says clear errors after enabling vector. */ @@ -927,16 +1019,7 @@ static void __cpuinit lapic_setup_esr(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceable is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk(KERN_INFO "Leaving ESR disabled.\n"); - else - printk(KERN_INFO "No ESR for 82489DX.\n"); + printk(KERN_INFO "No ESR for 82489DX.\n"); } } @@ -963,7 +1046,7 @@ void __cpuinit setup_local_APIC(void) * Double-check whether this APIC is really registered. */ if (!apic_id_registered()) - BUG(); + WARN_ON_ONCE(1); /* * Intel recommends to set DFR, LDR and TPR before enabling @@ -978,7 +1061,7 @@ void __cpuinit setup_local_APIC(void) */ value = apic_read(APIC_TASKPRI); value &= ~APIC_TPRI_MASK; - apic_write_around(APIC_TASKPRI, value); + apic_write(APIC_TASKPRI, value); /* * After a crash, we no longer service the interrupts and a pending @@ -1036,7 +1119,7 @@ void __cpuinit setup_local_APIC(void) * Set spurious IRQ vector */ value |= SPURIOUS_APIC_VECTOR; - apic_write_around(APIC_SPIV, value); + apic_write(APIC_SPIV, value); /* * Set up LVT0, LVT1: @@ -1058,7 +1141,7 @@ void __cpuinit setup_local_APIC(void) apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id()); } - apic_write_around(APIC_LVT0, value); + apic_write(APIC_LVT0, value); /* * only the BP should see the LINT1 NMI signal, obviously. @@ -1069,18 +1152,22 @@ void __cpuinit setup_local_APIC(void) value = APIC_DM_NMI | APIC_LVT_MASKED; if (!integrated) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); + apic_write(APIC_LVT1, value); } void __cpuinit end_local_APIC_setup(void) { - unsigned long value; - lapic_setup_esr(); - /* Disable the local apic timer */ - value = apic_read(APIC_LVTT); - value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, value); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif setup_apic_nmi_watchdog(NULL); apic_pm_activate(); @@ -1094,7 +1181,7 @@ static int __init detect_init_APIC(void) u32 h, l, features; /* Disabled by kernel option? */ - if (enable_local_apic < 0) + if (disable_apic) return -1; switch (boot_cpu_data.x86_vendor) { @@ -1117,7 +1204,7 @@ static int __init detect_init_APIC(void) * Over-ride BIOS and try to enable the local APIC only if * "lapic" specified. */ - if (enable_local_apic <= 0) { + if (!force_enable_local_apic) { printk(KERN_INFO "Local APIC disabled by BIOS -- " "you can enable it with \"lapic\"\n"); return -1; @@ -1154,9 +1241,6 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1193,38 +1277,8 @@ void __init init_apic_mappings(void) * default configuration (or the MP table is broken). */ if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); -#ifdef CONFIG_X86_IO_APIC - { - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; - - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; - if (!ioapic_phys) { - printk(KERN_ERR - "WARNING: bogus zero IO-APIC " - "address found in MPTABLE, " - "disabling IO/APIC support!\n"); - smp_found_config = 0; - skip_ioapic_setup = 1; - goto fake_ioapic_page; - } - } else { -fake_ioapic_page: - ioapic_phys = (unsigned long) - alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - } - } -#endif } /* @@ -1236,9 +1290,6 @@ int apic_version[MAX_APICS]; int __init APIC_init_uniprocessor(void) { - if (enable_local_apic < 0) - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); - if (!smp_found_config && !cpu_has_apic) return -1; @@ -1263,12 +1314,16 @@ int __init APIC_init_uniprocessor(void) * might be zero if read from MP tables. Get it from LAPIC. */ #ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); #endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); setup_local_APIC(); +#ifdef CONFIG_X86_IO_APIC + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) +#endif + localise_nmi_watchdog(); end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config) @@ -1338,55 +1393,12 @@ void smp_error_interrupt(struct pt_regs *regs) irq_exit(); } -#ifdef CONFIG_SMP -void __init smp_intr_init(void) -{ - /* - * IRQ0 must be given a fixed assignment and initialized, - * because it's used before the IO-APIC is set up. - */ - set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); - - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPI for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); -} -#endif - -/* - * Initialize APIC interrupts - */ -void __init apic_intr_init(void) -{ -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -} - /** * connect_bsp_APIC - attach the APIC to the interrupt system */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Do not trust the local APIC being empty at bootup. @@ -1401,6 +1413,7 @@ void __init connect_bsp_APIC(void) outb(0x70, 0x22); outb(0x01, 0x23); } +#endif enable_apic_mode(); } @@ -1413,6 +1426,9 @@ void __init connect_bsp_APIC(void) */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Put the board back into PIC mode (has an effect only on @@ -1424,56 +1440,53 @@ void disconnect_bsp_APIC(int virt_wire_setup) "entering PIC mode.\n"); outb(0x70, 0x22); outb(0x00, 0x23); - } else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; + return; + } +#endif - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write_around(APIC_SPIV, value); + /* Go back to Virtual Wire compatibility mode */ - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write_around(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - } + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + if (!virt_wire_setup) { /* - * For LVT1 make it edge triggered, active high, nmi and - * enabled + * For LVT0 make it edge triggered, active high, + * external and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write_around(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } -} -unsigned int __cpuinitdata maxcpus = NR_CPUS; + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); +} void __cpuinit generic_processor_info(int apicid, int version) { int cpu; cpumask_t tmp_map; - physid_mask_t phys_cpu; /* * Validate version @@ -1486,33 +1499,29 @@ void __cpuinit generic_processor_info(int apicid, int version) } apic_version[apicid] = version; - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); return; } - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - num_processors++; cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if (apicid == boot_cpu_physical_apicid) + physid_set(apicid, phys_cpu_present_map); + if (apicid == boot_cpu_physical_apicid) { /* * x86_bios_cpu_apicid is required to have processors listed * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. */ cpu = 0; + } + if (apicid > max_physical_apicid) + max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 /* * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y * but we need to work other dependencies like SMP_SUSPEND etc @@ -1520,7 +1529,7 @@ void __cpuinit generic_processor_info(int apicid, int version) * if (CPU_HOTPLUG_ENABLED || num_processors > 8) * - Ashok Raj <ashok.raj@intel.com> */ - if (num_processors > 8) { + if (max_physical_apicid >= 8) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_INTEL: if (!APIC_XAPIC(version)) { @@ -1532,11 +1541,13 @@ void __cpuinit generic_processor_info(int apicid, int version) def_to_bigsmp = 1; } } -#ifdef CONFIG_SMP +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + if (early_per_cpu_ptr(x86_cpu_to_apicid)) { + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); + u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); cpu_to_apicid[cpu] = apicid; bios_cpu_apicid[cpu] = apicid; @@ -1545,6 +1556,7 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } #endif + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } @@ -1555,6 +1567,11 @@ void __cpuinit generic_processor_info(int apicid, int version) #ifdef CONFIG_PM static struct { + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1595,7 +1612,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif @@ -1619,16 +1636,23 @@ static int lapic_resume(struct sys_device *dev) local_irq_save(flags); - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); @@ -1638,7 +1662,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1652,7 +1676,9 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } @@ -1703,25 +1729,25 @@ static void apic_pm_activate(void) { } */ static int __init parse_lapic(char *arg) { - enable_local_apic = 1; + force_enable_local_apic = 1; return 0; } early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +static int __init setup_disableapic(char *arg) { - enable_local_apic = -1; - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + disable_apic = 1; + setup_clear_cpu_cap(X86_FEATURE_APIC); return 0; } -early_param("nolapic", parse_nolapic); +early_param("disableapic", setup_disableapic); -static int __init parse_disable_lapic_timer(char *arg) +/* same as disableapic, for compatibility */ +static int __init setup_nolapic(char *arg) { - local_apic_timer_disabled = 1; - return 0; + return setup_disableapic(arg); } -early_param("nolapic_timer", parse_disable_lapic_timer); +early_param("nolapic", setup_nolapic); static int __init parse_lapic_timer_c2_ok(char *arg) { @@ -1730,13 +1756,60 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static int __init apic_set_verbosity(char *str) +static int __init parse_disable_apic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); + +static int __init apic_set_verbosity(char *arg) { - if (strcmp("debug", str) == 0) + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif + return -EINVAL; + } + + if (strcmp("debug", arg) == 0) apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) + else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; - return 1; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + +static int __init lapic_insert_resource(void) +{ + if (!apic_phys) + return -1; + + /* Put local APIC into the resource map. */ + lapic_resource.start = apic_phys; + lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; + insert_resource(&iomem_resource, &lapic_resource); + + return 0; } -__setup("apic=", apic_set_verbosity); +/* + * need call insert after e820_reserve_resources() + * that is using request_resource + */ +late_initcall(lapic_insert_resource); diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd0dc2..53898b65a6a 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -27,6 +27,7 @@ #include <linux/clockchips.h> #include <linux/acpi_pmtmr.h> #include <linux/module.h> +#include <linux/dmar.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -39,13 +40,20 @@ #include <asm/proto.h> #include <asm/timex.h> #include <asm/apic.h> +#include <asm/i8259.h> #include <mach_ipi.h> #include <mach_apic.h> -int disable_apic_timer __cpuinitdata; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; +int disable_x2apic; +int x2apic; + +/* x2apic enabled before OS handover */ +int x2apic_preenabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; @@ -54,7 +62,10 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); /* * Debug level, exported for io_apic.c */ -int apic_verbosity; +unsigned int apic_verbosity; + +/* Have we found an MP table */ +int smp_found_config; static struct resource lapic_resource = { .name = "Local APIC", @@ -70,6 +81,9 @@ static void lapic_timer_setup(enum clock_event_mode mode, static void lapic_timer_broadcast(cpumask_t mask); static void apic_pm_activate(void); +/* + * The local apic timer can be used for any function which is CPU local. + */ static struct clock_event_device lapic_clockevent = { .name = "lapic", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT @@ -87,10 +101,6 @@ static unsigned long apic_phys; unsigned long mp_lapic_addr; -DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - -unsigned int __cpuinitdata maxcpus = NR_CPUS; /* * Get the LAPIC version */ @@ -100,11 +110,15 @@ static inline int lapic_get_version(void) } /* - * Check, if the APIC is integrated or a seperate chip + * Check, if the APIC is integrated or a separate chip */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 return 1; +#else + return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -119,13 +133,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -141,6 +160,68 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + +static void x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return; +} + +static u32 safe_x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return 0; +} + +void x2apic_icr_write(u32 low, u32 id) +{ + wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low); +} + +u64 x2apic_icr_read(void) +{ + unsigned long val; + + rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val); + return val; +} + +static struct apic_ops x2apic_ops = { + .read = native_apic_msr_read, + .write = native_apic_msr_write, + .icr_read = x2apic_icr_read, + .icr_write = x2apic_icr_write, + .wait_icr_idle = x2apic_wait_icr_idle, + .safe_wait_icr_idle = safe_x2apic_wait_icr_idle, +}; + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ @@ -150,6 +231,11 @@ void __cpuinit enable_NMI_through_LVT0(void) /* unmask and set to NMI */ v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -158,14 +244,28 @@ void __cpuinit enable_NMI_through_LVT0(void) */ int lapic_get_maxlvt(void) { - unsigned int v, maxlvt; + unsigned int v; v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } /* + * Local APIC timer + */ + +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else +#define APIC_DIVISOR 16 +#endif + +/* * This function sets up the local APIC timer, with a timeout of * 'clocks' APIC bus clock. During calibration we actually call * this function twice on the boot CPU, once with a bogus timeout @@ -175,7 +275,6 @@ int lapic_get_maxlvt(void) * We do reads before writes even if unnecessary, to get around the * P5 APIC double write bug. */ - static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; @@ -183,6 +282,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) lvtt_value = LOCAL_TIMER_VECTOR; if (!oneshot) lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + if (!irqen) lvtt_value |= APIC_LVT_MASKED; @@ -192,12 +294,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) * Divide PICLK by 16 */ tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); + apic_write(APIC_TDCR, + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) - apic_write(APIC_TMICT, clocks); + apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* @@ -314,7 +416,7 @@ static void setup_APIC_timer(void) #define TICK_COUNT 100000000 -static void __init calibrate_APIC_clock(void) +static int __init calibrate_APIC_clock(void) { unsigned apic, apic_start; unsigned long tsc, tsc_start; @@ -367,7 +469,18 @@ static void __init calibrate_APIC_clock(void) lapic_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &lapic_clockevent); - calibration_result = result / HZ; + calibration_result = (result * APIC_DIVISOR) / HZ; + + /* + * Do a sanity check on the APIC calibration result + */ + if (calibration_result < (1000000 / HZ)) { + printk(KERN_WARNING + "APIC frequency too slow, disabling apic timer\n"); + return -1; + } + + return 0; } /* @@ -378,10 +491,10 @@ static void __init calibrate_APIC_clock(void) void __init setup_boot_APIC_clock(void) { /* - * The local apic timer can be disabled via the kernel commandline. - * Register the lapic timer as a dummy clock event source on SMP - * systems, so the broadcast mechanism is used. On UP systems simply - * ignore it. + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. */ if (disable_apic_timer) { printk(KERN_INFO "Disabling APIC timer\n"); @@ -393,15 +506,10 @@ void __init setup_boot_APIC_clock(void) return; } - printk(KERN_INFO "Using local APIC timer interrupts.\n"); - calibrate_APIC_clock(); + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); - /* - * Do a sanity check on the APIC calibration result - */ - if (calibration_result < (1000000 / HZ)) { - printk(KERN_WARNING - "APIC frequency too slow, disabling apic timer\n"); + if (calibrate_APIC_clock()) { /* No broadcast on UP ! */ if (num_possible_cpus() > 1) setup_APIC_timer(); @@ -417,37 +525,14 @@ void __init setup_boot_APIC_clock(void) lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; else printk(KERN_WARNING "APIC timer registered as dummy," - " due to nmi_watchdog=1!\n"); + " due to nmi_watchdog=%d!\n", nmi_watchdog); + /* Setup the lapic or request the broadcast */ setup_APIC_timer(); } -/* - * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the - * C1E flag only in the secondary CPU, so when we detect the wreckage - * we already have enabled the boot CPU local apic timer. Check, if - * disable_apic_timer is set and the DUMMY flag is cleared. If yes, - * set the DUMMY flag again and force the broadcast mode in the - * clockevents layer. - */ -static void __cpuinit check_boot_apic_timer_broadcast(void) -{ - if (!disable_apic_timer || - (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) - return; - - printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); - lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; - - local_irq_enable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, - &boot_cpu_physical_apicid); - local_irq_disable(); -} - void __cpuinit setup_secondary_APIC_clock(void) { - check_boot_apic_timer_broadcast(); setup_APIC_timer(); } @@ -481,7 +566,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 add_pda(apic_timer_irqs, 1); +#else + per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -512,6 +601,7 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_enter(); local_apic_timer_interrupt(); irq_exit(); + set_irq_regs(old_regs); } @@ -565,6 +655,13 @@ void clear_local_APIC(void) apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); } + /* lets not touch this if we didn't frob it */ +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) + if (maxlvt >= 5) { + v = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); + } +#endif /* * Clean APIC state for other OSs: */ @@ -575,8 +672,14 @@ void clear_local_APIC(void) apic_write(APIC_LVTERR, APIC_LVT_MASKED); if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); + + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } } /** @@ -595,8 +698,28 @@ void disable_local_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); + +#ifdef CONFIG_X86_32 + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ + if (enabled_via_apicbase) { + unsigned int l, h; + + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, h); + } +#endif } +/* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ void lapic_shutdown(void) { unsigned long flags; @@ -606,7 +729,13 @@ void lapic_shutdown(void) local_irq_save(flags); - disable_local_APIC(); +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif + disable_local_APIC(); + local_irq_restore(flags); } @@ -650,10 +779,10 @@ int __init verify_local_APIC(void) /* * The ID register is read/write in a real APIC. */ - reg0 = read_apic_id(); + reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); - reg1 = read_apic_id(); + reg1 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); apic_write(APIC_ID, reg0); if (reg1 != (reg0 ^ APIC_ID_MASK)) @@ -677,8 +806,11 @@ int __init verify_local_APIC(void) */ void __init sync_Arb_IDs(void) { - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - if (modern_apic()) + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ + if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; /* @@ -687,8 +819,8 @@ void __init sync_Arb_IDs(void) apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -705,8 +837,6 @@ void __init init_bsp_APIC(void) if (smp_found_config || !cpu_has_apic) return; - value = apic_read(APIC_LVR); - /* * Do not trust the local APIC being empty at bootup. */ @@ -718,7 +848,15 @@ void __init init_bsp_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; - value |= APIC_SPIV_FOCUS_DISABLED; + +#ifdef CONFIG_X86_32 + /* This bit is reserved on P4/Xeon and should be cleared */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) + value &= ~APIC_SPIV_FOCUS_DISABLED; + else +#endif + value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -727,9 +865,50 @@ void __init init_bsp_APIC(void) */ apic_write(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; + if (!lapic_is_integrated()) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; apic_write(APIC_LVT1, value); } +static void __cpuinit lapic_setup_esr(void) +{ + unsigned long oldvalue, value, maxlvt; + if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } + /* !82489DX */ + maxlvt = lapic_get_maxlvt(); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + oldvalue = apic_read(APIC_ESR); + + /* enables sending errors */ + value = ERROR_APIC_VECTOR; + apic_write(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, "ESR value before enabling " + "vector: 0x%08lx after: 0x%08lx\n", + oldvalue, value); + } else { + printk(KERN_INFO "No ESR for 82489DX.\n"); + } +} + + /** * setup_local_APIC - setup the local APIC */ @@ -835,26 +1014,143 @@ void __cpuinit setup_local_APIC(void) preempt_enable(); } -static void __cpuinit lapic_setup_esr(void) -{ - unsigned maxlvt = lapic_get_maxlvt(); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); -} - void __cpuinit end_local_APIC_setup(void) { lapic_setup_esr(); - nmi_watchdog_default(); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } +void check_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + + if (msr & X2APIC_ENABLE) { + printk("x2apic enabled by BIOS, switching to x2apic ops\n"); + x2apic_preenabled = x2apic = 1; + apic_ops = &x2apic_ops; + } +} + +void enable_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + if (!(msr & X2APIC_ENABLE)) { + printk("Enabling x2apic\n"); + wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); + } +} + +void enable_IR_x2apic(void) +{ +#ifdef CONFIG_INTR_REMAP + int ret; + unsigned long flags; + + if (!cpu_has_x2apic) + return; + + if (!x2apic_preenabled && disable_x2apic) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of nox2apic\n"); + return; + } + + if (x2apic_preenabled && disable_x2apic) + panic("Bios already enabled x2apic, can't enforce nox2apic"); + + if (!x2apic_preenabled && skip_ioapic_setup) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of skipping io-apic setup\n"); + return; + } + + ret = dmar_table_init(); + if (ret) { + printk(KERN_INFO + "dmar_table_init() failed with %d:\n", ret); + + if (x2apic_preenabled) + panic("x2apic enabled by bios. But IR enabling failed"); + else + printk(KERN_INFO + "Not enabling x2apic,Intr-remapping\n"); + return; + } + + local_irq_save(flags); + mask_8259A(); + save_mask_IO_APIC_setup(); + + ret = enable_intr_remapping(1); + + if (ret && x2apic_preenabled) { + local_irq_restore(flags); + panic("x2apic enabled by bios. But IR enabling failed"); + } + + if (ret) + goto end; + + if (!x2apic) { + x2apic = 1; + apic_ops = &x2apic_ops; + enable_x2apic(); + } +end: + if (ret) + /* + * IR enabling failed + */ + restore_IO_APIC_setup(); + else + reinit_intr_remapped_IO_APIC(x2apic_preenabled); + + unmask_8259A(); + local_irq_restore(flags); + + if (!ret) { + if (!x2apic_preenabled) + printk(KERN_INFO + "Enabled x2apic and interrupt-remapping\n"); + else + printk(KERN_INFO + "Enabled Interrupt-remapping\n"); + } else + printk(KERN_ERR + "Failed to enable Interrupt-remapping and x2apic\n"); +#else + if (!cpu_has_x2apic) + return; + + if (x2apic_preenabled) + panic("x2apic enabled prior OS handover," + " enable CONFIG_INTR_REMAP"); + + printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping " + " and x2apic\n"); +#endif + + return; +} + /* * Detect and enable local APICs on non-SMP boards. * Original code written by Keir Fraser. @@ -875,7 +1171,7 @@ static int __init detect_init_APIC(void) void __init early_init_lapic_mapping(void) { - unsigned long apic_phys; + unsigned long phys_addr; /* * If no local APIC can be found then go out @@ -884,17 +1180,17 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - apic_phys = mp_lapic_addr; + phys_addr = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + set_fixmap_nocache(FIX_APIC_BASE, phys_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, phys_addr); /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /** @@ -902,6 +1198,11 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { + if (x2apic) { + boot_cpu_physical_apicid = read_apic_id(); + return; + } + /* * If no local APIC can be found then set up a fake all * zeroes page to simulate the local APIC and another @@ -921,13 +1222,15 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ +int apic_version[MAX_APICS]; + int __init APIC_init_uniprocessor(void) { if (disable_apic) { @@ -940,9 +1243,14 @@ int __init APIC_init_uniprocessor(void) return -1; } + enable_IR_x2apic(); + setup_apic_routing(); + verify_local_APIC(); - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + connect_bsp_APIC(); + + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid)); setup_local_APIC(); @@ -954,6 +1262,8 @@ int __init APIC_init_uniprocessor(void) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) + localise_nmi_watchdog(); end_local_APIC_setup(); if (smp_found_config && !skip_ioapic_setup && nr_ioapics) @@ -1021,10 +1331,58 @@ asmlinkage void smp_error_interrupt(void) irq_exit(); } +/** + * connect_bsp_APIC - attach the APIC to the interrupt system + */ +void __init connect_bsp_APIC(void) +{ +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); + } +#endif + enable_apic_mode(); +} + +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + return; + } +#endif + /* Go back to Virtual Wire compatibility mode */ - unsigned long value; /* For the spurious interrupt use vector F, and enable it */ value = apic_read(APIC_SPIV); @@ -1050,7 +1408,10 @@ void disconnect_bsp_APIC(int virt_wire_setup) apic_write(APIC_LVT0, APIC_LVT_MASKED); } - /* For LVT1 make it edge triggered, active high, nmi and enabled */ + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ value = apic_read(APIC_LVT1); value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | @@ -1065,15 +1426,20 @@ void __cpuinit generic_processor_info(int apicid, int version) int cpu; cpumask_t tmp_map; - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; + /* + * Validate version + */ + if (version == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + version); + version = 0x10; } + apic_version[apicid] = version; - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); + if (num_processors >= NR_CPUS) { + printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + " Processor ignored.\n", NR_CPUS); return; } @@ -1090,10 +1456,36 @@ void __cpuinit generic_processor_info(int apicid, int version) */ cpu = 0; } + if (apicid > max_physical_apicid) + max_physical_apicid = apicid; + +#ifdef CONFIG_X86_32 + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj <ashok.raj@intel.com> + */ + if (max_physical_apicid >= 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + if (early_per_cpu_ptr(x86_cpu_to_apicid)) { + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); + u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); cpu_to_apicid[cpu] = apicid; bios_cpu_apicid[cpu] = apicid; @@ -1101,20 +1493,28 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_cpu_to_apicid, cpu) = apicid; per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } +#endif cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } +int hard_smp_processor_id(void) +{ + return read_apic_id(); +} + /* * Power management */ #ifdef CONFIG_PM static struct { - /* 'active' is true if the local APIC was enabled by us and - not the BIOS; this signifies that we are also responsible - for disabling it before entering apm/acpi suspend */ + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1142,7 +1542,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) maxlvt = lapic_get_maxlvt(); - apic_pm_state.apic_id = read_apic_id(); + apic_pm_state.apic_id = apic_read(APIC_ID); apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); apic_pm_state.apic_ldr = apic_read(APIC_LDR); apic_pm_state.apic_dfr = apic_read(APIC_DFR); @@ -1155,10 +1555,11 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif + local_irq_save(flags); disable_local_APIC(); local_irq_restore(flags); @@ -1177,10 +1578,25 @@ static int lapic_resume(struct sys_device *dev) maxlvt = lapic_get_maxlvt(); local_irq_save(flags); - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); apic_write(APIC_DFR, apic_pm_state.apic_dfr); @@ -1189,7 +1605,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1203,10 +1619,17 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + static struct sysdev_class lapic_sysclass = { .name = "lapic", .resume = lapic_resume, @@ -1269,7 +1692,7 @@ __cpuinit int apic_is_clustered_box(void) if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box()) return 0; - bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { @@ -1320,42 +1743,30 @@ __cpuinit int apic_is_clustered_box(void) return (clusters > 2); } -/* - * APIC command line parameters - */ -static int __init apic_set_verbosity(char *str) +static __init int setup_nox2apic(char *str) { - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - + disable_x2apic = 1; + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC); return 0; } -early_param("apic", apic_set_verbosity); +early_param("nox2apic", setup_nox2apic); + -static __init int setup_disableapic(char *str) +/* + * APIC command line parameters + */ +static int __init setup_disableapic(char *arg) { disable_apic = 1; - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + setup_clear_cpu_cap(X86_FEATURE_APIC); return 0; } early_param("disableapic", setup_disableapic); /* same as disableapic, for compatibility */ -static __init int setup_nolapic(char *str) +static int __init setup_nolapic(char *arg) { - return setup_disableapic(str); + return setup_disableapic(arg); } early_param("nolapic", setup_nolapic); @@ -1366,14 +1777,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static __init int setup_noapictimer(char *str) +static int __init parse_disable_apic_timer(char *arg) { - if (str[0] != ' ' && str[0] != 0) - return 0; disable_apic_timer = 1; - return 1; + return 0; } -__setup("noapictimer", setup_noapictimer); +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); static __init int setup_apicpmtimer(char *s) { @@ -1383,6 +1799,31 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); +static int __init apic_set_verbosity(char *arg) +{ + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif + return -EINVAL; + } + + if (strcmp("debug", arg) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", arg) == 0) + apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + static int __init lapic_insert_resource(void) { if (!apic_phys) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e2901..5145a6e72bb 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -204,6 +204,7 @@ #include <linux/module.h> #include <linux/poll.h> +#include <linux/smp_lock.h> #include <linux/types.h> #include <linux/stddef.h> #include <linux/timer.h> @@ -218,7 +219,6 @@ #include <linux/time.h> #include <linux/sched.h> #include <linux/pm.h> -#include <linux/pm_legacy.h> #include <linux/capability.h> #include <linux/device.h> #include <linux/kernel.h> @@ -233,6 +233,7 @@ #include <asm/uaccess.h> #include <asm/desc.h> #include <asm/i8253.h> +#include <asm/olpc.h> #include <asm/paravirt.h> #include <asm/reboot.h> @@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender) as->event_tail = 0; } as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) continue; switch (event) { case APM_SYS_SUSPEND: @@ -1211,9 +1212,9 @@ static int suspend(int vetoable) if (err != APM_SUCCESS) apm_error("suspend", err); err = (err == APM_SUCCESS) ? 0 : -EIO; - device_power_up(); + device_power_up(PMSG_RESUME); local_irq_enable(); - device_resume(); + device_resume(PMSG_RESUME); queue_event(APM_NORMAL_RESUME, NULL); spin_lock(&user_list_lock); for (as = user_list; as != NULL; as = as->next) { @@ -1238,7 +1239,7 @@ static void standby(void) apm_error("standby", err); local_irq_disable(); - device_power_up(); + device_power_up(PMSG_RESUME); local_irq_enable(); } @@ -1324,7 +1325,7 @@ static void check_events(void) ignore_bounce = 1; if ((event != APM_NORMAL_RESUME) || (ignore_normal_resume == 0)) { - device_resume(); + device_resume(PMSG_RESUME); queue_event(event, NULL); } ignore_normal_resume = 0; @@ -1396,7 +1397,7 @@ static void apm_mainloop(void) static int check_apm_user(struct apm_user *as, const char *func) { - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + if (as == NULL || as->magic != APM_BIOS_MAGIC) { printk(KERN_ERR "apm: %s passed bad filp\n", func); return 1; } @@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait) return 0; } -static int do_ioctl(struct inode *inode, struct file *filp, - u_int cmd, u_long arg) +static long do_ioctl(struct file *filp, u_int cmd, u_long arg) { struct apm_user *as; + int ret; as = filp->private_data; if (check_apm_user(as, "ioctl")) return -EIO; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) return -EPERM; switch (cmd) { case APM_IOC_STANDBY: + lock_kernel(); if (as->standbys_read > 0) { as->standbys_read--; as->standbys_pending--; @@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp, queue_event(APM_USER_STANDBY, as); if (standbys_pending <= 0) standby(); + unlock_kernel(); break; case APM_IOC_SUSPEND: + lock_kernel(); if (as->suspends_read > 0) { as->suspends_read--; as->suspends_pending--; @@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp, } else queue_event(APM_USER_SUSPEND, as); if (suspends_pending <= 0) { - return suspend(1); + ret = suspend(1); } else { as->suspend_wait = 1; wait_event_interruptible(apm_suspend_waitqueue, as->suspend_wait == 0); - return as->suspend_result; + ret = as->suspend_result; } - break; + unlock_kernel(); + return ret; default: - return -EINVAL; + return -ENOTTY; } return 0; } @@ -1544,10 +1549,12 @@ static int do_open(struct inode *inode, struct file *filp) { struct apm_user *as; + lock_kernel(); as = kmalloc(sizeof(*as), GFP_KERNEL); if (as == NULL) { printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n", sizeof(*as)); + unlock_kernel(); return -ENOMEM; } as->magic = APM_BIOS_MAGIC; @@ -1569,6 +1576,7 @@ static int do_open(struct inode *inode, struct file *filp) user_list = as; spin_unlock(&user_list_lock); filp->private_data = as; + unlock_kernel(); return 0; } @@ -1860,7 +1868,7 @@ static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, - .ioctl = do_ioctl, + .unlocked_ioctl = do_ioctl, .open = do_open, .release = do_release, }; @@ -2209,7 +2217,7 @@ static int __init apm_init(void) dmi_check_system(apm_dmi_table); - if (apm_info.bios.version == 0 || paravirt_enabled()) { + if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) { printk(KERN_INFO "apm: BIOS not found.\n"); return -ENODEV; } diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index 92588083950..6649d09ad88 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -111,7 +111,7 @@ void foo(void) OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable); OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable); OFFSET(PV_CPU_iret, pv_cpu_ops, iret); - OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret); + OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit); OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0); #endif diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index f126c05d617..505543a75a5 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -18,9 +18,11 @@ #include <asm/ia32.h> #include <asm/bootparam.h> +#include <xen/interface/xen.h> + #define __NO_STUBS 1 #undef __SYSCALL -#undef _ASM_X86_64_UNISTD_H_ +#undef ASM_X86__UNISTD_64_H #define __SYSCALL(nr, sym) [nr] = 1, static char syscalls[] = { #include <asm/unistd.h> @@ -34,7 +36,7 @@ int main(void) ENTRY(pid); BLANK(); #undef ENTRY -#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry)) +#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry)) ENTRY(flags); ENTRY(addr_limit); ENTRY(preempt_count); @@ -61,8 +63,11 @@ int main(void) OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops); OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable); OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable); + OFFSET(PV_IRQ_adjust_exception_frame, pv_irq_ops, adjust_exception_frame); OFFSET(PV_CPU_iret, pv_cpu_ops, iret); - OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret); + OFFSET(PV_CPU_usergs_sysret32, pv_cpu_ops, usergs_sysret32); + OFFSET(PV_CPU_usergs_sysret64, pv_cpu_ops, usergs_sysret64); + OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit); OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs); OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2); #endif @@ -128,5 +133,14 @@ int main(void) OFFSET(BP_loadflags, boot_params, hdr.loadflags); OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); OFFSET(BP_version, boot_params, hdr.version); + + BLANK(); + DEFINE(PAGE_SIZE_asm, PAGE_SIZE); +#ifdef CONFIG_XEN + BLANK(); + OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask); + OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending); +#undef ENTRY +#endif return 0; } diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c new file mode 100644 index 00000000000..fdd585f9c53 --- /dev/null +++ b/arch/x86/kernel/bios_uv.c @@ -0,0 +1,48 @@ +/* + * BIOS run time interface routines. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <asm/uv/bios.h> + +const char * +x86_bios_strerror(long status) +{ + const char *str; + switch (status) { + case 0: str = "Call completed without error"; break; + case -1: str = "Not implemented"; break; + case -2: str = "Invalid argument"; break; + case -3: str = "Call completed with error"; break; + default: str = "Unknown BIOS status code"; break; + } + return str; +} + +long +x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second, + unsigned long *drift_info) +{ + struct uv_bios_retval isrv; + + BIOS_CALL(isrv, BIOS_FREQ_BASE, which, 0, 0, 0, 0, 0, 0); + *ticks_per_second = isrv.v0; + *drift_info = isrv.v1; + return isrv.status; +} +EXPORT_SYMBOL_GPL(x86_bios_freq_base); diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f819088..7f0b45a5d78 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -3,18 +3,30 @@ # obj-y := intel_cacheinfo.o addon_cpuid_features.o -obj-y += proc.o feature_names.o +obj-y += proc.o capflags.o powerflags.o common.o -obj-$(CONFIG_X86_32) += common.o bugs.o -obj-$(CONFIG_X86_32) += amd.o -obj-$(CONFIG_X86_32) += cyrix.o -obj-$(CONFIG_X86_32) += centaur.o -obj-$(CONFIG_X86_32) += transmeta.o -obj-$(CONFIG_X86_32) += intel.o -obj-$(CONFIG_X86_32) += umc.o +obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o +obj-$(CONFIG_X86_64) += bugs_64.o + +obj-$(CONFIG_CPU_SUP_INTEL) += intel.o +obj-$(CONFIG_CPU_SUP_AMD) += amd.o +obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o +obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o +obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o +obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o +obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ obj-$(CONFIG_MTRR) += mtrr/ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o + +quiet_cmd_mkcapflags = MKCAP $@ + cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@ + +cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h + +targets += capflags.c +$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE + $(call if_changed,mkcapflags) diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce33c7c..0d9c993aa93 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -1,14 +1,14 @@ - /* * Routines to indentify additional cpu features that are scattered in * cpuid space. */ - #include <linux/cpu.h> #include <asm/pat.h> #include <asm/processor.h> +#include <mach_apic.h> + struct cpuid_bit { u16 feature; u8 reg; @@ -50,22 +50,122 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) } } +/* leaf 0xb SMT level */ +#define SMT_LEVEL 0 + +/* leaf 0xb sub-leaf types */ +#define INVALID_TYPE 0 +#define SMT_TYPE 1 +#define CORE_TYPE 2 + +#define LEAFB_SUBTYPE(ecx) (((ecx) >> 8) & 0xff) +#define BITS_SHIFT_NEXT_LEVEL(eax) ((eax) & 0x1f) +#define LEVEL_MAX_SIBLINGS(ebx) ((ebx) & 0xffff) + +/* + * Check for extended topology enumeration cpuid leaf 0xb and if it + * exists, use it for populating initial_apicid and cpu topology + * detection. + */ +void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned int eax, ebx, ecx, edx, sub_index; + unsigned int ht_mask_width, core_plus_mask_width; + unsigned int core_select_mask, core_level_siblings; + + if (c->cpuid_level < 0xb) + return; + + cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx); + + /* + * check if the cpuid leaf 0xb is actually implemented. + */ + if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE)) + return; + + set_cpu_cap(c, X86_FEATURE_XTOPOLOGY); + + /* + * initial apic id, which also represents 32-bit extended x2apic id. + */ + c->initial_apicid = edx; + + /* + * Populate HT related information from sub-leaf level 0. + */ + core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); + + sub_index = 1; + do { + cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx); + + /* + * Check for the Core type in the implemented sub leaves. + */ + if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) { + core_level_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); + break; + } + + sub_index++; + } while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE); + + core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width; + +#ifdef CONFIG_X86_32 + c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width) + & core_select_mask; + c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width); +#else + c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask; + c->phys_proc_id = phys_pkg_id(core_plus_mask_width); +#endif + c->x86_max_cores = (core_level_siblings / smp_num_siblings); + + + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + if (c->x86_max_cores > 1) + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + return; +#endif +} + #ifdef CONFIG_X86_PAT void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) { + if (!cpu_has_pat) + pat_disable("PAT not supported by CPU."); + switch (c->x86_vendor) { - case X86_VENDOR_AMD: - if (c->x86 >= 0xf && c->x86 <= 0x11) - return; - break; case X86_VENDOR_INTEL: - if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) + /* + * There is a known erratum on Pentium III and Core Solo + * and Core Duo CPUs. + * " Page with PAT set to WC while associated MTRR is UC + * may consolidate to UC " + * Because of this erratum, it is better to stick with + * setting WC in MTRR rather than using PAT on these CPUs. + * + * Enable PAT WC only on P4, Core 2 or later CPUs. + */ + if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15)) return; - break; + + pat_disable("PAT WC disabled due to known CPU erratum."); + return; + + case X86_VENDOR_AMD: + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } - pat_disable(cpu_has_pat ? - "PAT disabled. Not yet verified on this CPU type." : - "PAT not supported by CPU."); + pat_disable("PAT disabled. Not yet verified on this CPU type."); } #endif diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 24586682829..32e73520adf 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1,13 +1,22 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/mm.h> + #include <asm/io.h> #include <asm/processor.h> #include <asm/apic.h> +#ifdef CONFIG_X86_64 +# include <asm/numa_64.h> +# include <asm/mmconfig.h> +# include <asm/cacheflush.h> +#endif + #include <mach_apic.h> + #include "cpu.h" +#ifdef CONFIG_X86_32 /* * B step AMD K6 before B 9730xxxx have hardware bugs that can cause * misexecution of code under Linux. Owners of such processors should @@ -24,60 +33,273 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -#ifdef CONFIG_X86_LOCAL_APIC -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) +static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c) { - u32 lo, hi; - u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) { - if (smp_processor_id() != boot_cpu_physical_apicid) - printk(KERN_INFO "AMD C1E detected late. " - " Force timer broadcast.\n"); - return 1; +/* + * General Systems BIOSen alias the cpu frequency registers + * of the Elan at 0x000df000. Unfortuantly, one of the Linux + * drivers subsequently pokes it, and changes the CPU speed. + * Workaround : Remove the unneeded alias. + */ +#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ +#define CBAR_ENB (0x80000000) +#define CBAR_KEY (0X000000CB) + if (c->x86_model == 9 || c->x86_model == 10) { + if (inl (CBAR) & CBAR_ENB) + outl (0 | CBAR_KEY, CBAR); + } +} + + +static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) +{ + u32 l, h; + int mbytes = num_physpages >> (20-PAGE_SHIFT); + + if (c->x86_model < 6) { + /* Based on AMD doc 20734R - June 2000 */ + if (c->x86_model == 0) { + clear_cpu_cap(c, X86_FEATURE_APIC); + set_cpu_cap(c, X86_FEATURE_PGE); } - break; - default: - /* err on the side of caution */ - return 1; + return; + } + + if (c->x86_model == 6 && c->x86_mask == 1) { + const int K6_BUG_LOOP = 1000000; + int n; + void (*f_vide)(void); + unsigned long d, d2; + + printk(KERN_INFO "AMD K6 stepping B detected - "); + + /* + * It looks like AMD fixed the 2.6.2 bug and improved indirect + * calls at the same time. + */ + + n = K6_BUG_LOOP; + f_vide = vide; + rdtscl(d); + while (n--) + f_vide(); + rdtscl(d2); + d = d2-d; + + if (d > 20*K6_BUG_LOOP) + printk("system stability may be impaired when more than 32 MB are used.\n"); + else + printk("probably OK (after B9730xxxx).\n"); + printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); + } + + /* K6 with old style WHCR */ + if (c->x86_model < 8 || + (c->x86_model == 8 && c->x86_mask < 8)) { + /* We can only write allocate on the low 508Mb */ + if (mbytes > 508) + mbytes = 508; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0x0000FFFF) == 0) { + unsigned long flags; + l = (1<<0)|((mbytes/4)<<1); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", + mbytes); + } + return; + } + + if ((c->x86_model == 8 && c->x86_mask > 7) || + c->x86_model == 9 || c->x86_model == 13) { + /* The more serious chips .. */ + + if (mbytes > 4092) + mbytes = 4092; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0xFFFF0000) == 0) { + unsigned long flags; + l = ((mbytes>>2)<<22)|(1<<16); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", + mbytes); + } + + return; + } + + if (c->x86_model == 10) { + /* AMD Geode LX is model 10 */ + /* placeholder for any needed mods */ + return; } - return 0; +} + +static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) +{ + u32 l, h; + + /* + * Bit 15 of Athlon specific MSR 15, needs to be 0 + * to enable SSE on Palomino/Morgan/Barton CPU's. + * If the BIOS didn't enable it already, enable it here. + */ + if (c->x86_model >= 6 && c->x86_model <= 10) { + if (!cpu_has(c, X86_FEATURE_XMM)) { + printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); + rdmsr(MSR_K7_HWCR, l, h); + l &= ~0x00008000; + wrmsr(MSR_K7_HWCR, l, h); + set_cpu_cap(c, X86_FEATURE_XMM); + } + } + + /* + * It's been determined by AMD that Athlons since model 8 stepping 1 + * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx + * As per AMD technical note 27212 0.2 + */ + if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { + rdmsr(MSR_K7_CLK_CTL, l, h); + if ((l & 0xfff00000) != 0x20000000) { + printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, + ((l & 0x000fffff)|0x20000000)); + wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); + } + } + + set_cpu_cap(c, X86_FEATURE_K7); } #endif -int force_mwait __cpuinitdata; +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +static int __cpuinit nearby_node(int apicid) +{ + int i, node; -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_HT + unsigned bits; + + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; +#endif +} + +static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) { - if (cpuid_eax(0x80000000) >= 0x80000007) { - c->x86_power = cpuid_edx(0x80000007); - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + int cpu = smp_processor_id(); + int node; + unsigned apicid = hard_smp_processor_id(); + + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif } -static void __cpuinit init_amd(struct cpuinfo_x86 *c) +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) { - u32 l, h; - int mbytes = num_physpages >> (20-PAGE_SHIFT); - int r; +#ifdef CONFIG_X86_HT + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; +#endif +} + +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + +#ifdef CONFIG_X86_64 + set_cpu_cap(c, X86_FEATURE_SYSCALL32); +#else + /* Set MTRR capability flag if appropriate */ + if (c->x86 == 5) + if (c->x86_model == 13 || c->x86_model == 9 || + (c->x86_model == 8 && c->x86_mask >= 8)) + set_cpu_cap(c, X86_FEATURE_K6_MTRR); +#endif +} +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ #ifdef CONFIG_SMP unsigned long long value; @@ -88,7 +310,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) * Errata 63 for SH-B3 steppings * Errata 122 for all steppings (F+ have it disabled by default) */ - if (c->x86 == 15) { + if (c->x86 == 0xf) { rdmsrl(MSR_K7_HWCR, value); value |= 1 << 6; wrmsrl(MSR_K7_HWCR, value); @@ -98,218 +320,119 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) early_init_amd(c); /* - * FIXME: We should handle the K5 here. Set up the write - * range and also turn on MSR 83 bits 4 and 31 (write alloc, - * no bus pipeline) - */ - - /* * Bit 31 in normal CPUID used for nonstandard 3DNow ID; * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ clear_cpu_cap(c, 0*32+31); - r = get_model_name(c); - - switch (c->x86) { - case 4: - /* - * General Systems BIOSen alias the cpu frequency registers - * of the Elan at 0x000df000. Unfortuantly, one of the Linux - * drivers subsequently pokes it, and changes the CPU speed. - * Workaround : Remove the unneeded alias. - */ -#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ -#define CBAR_ENB (0x80000000) -#define CBAR_KEY (0X000000CB) - if (c->x86_model == 9 || c->x86_model == 10) { - if (inl (CBAR) & CBAR_ENB) - outl (0 | CBAR_KEY, CBAR); - } - break; - case 5: - if (c->x86_model < 6) { - /* Based on AMD doc 20734R - June 2000 */ - if (c->x86_model == 0) { - clear_cpu_cap(c, X86_FEATURE_APIC); - set_cpu_cap(c, X86_FEATURE_PGE); - } - break; - } - - if (c->x86_model == 6 && c->x86_mask == 1) { - const int K6_BUG_LOOP = 1000000; - int n; - void (*f_vide)(void); - unsigned long d, d2; - - printk(KERN_INFO "AMD K6 stepping B detected - "); - - /* - * It looks like AMD fixed the 2.6.2 bug and improved indirect - * calls at the same time. - */ - - n = K6_BUG_LOOP; - f_vide = vide; - rdtscl(d); - while (n--) - f_vide(); - rdtscl(d2); - d = d2-d; - - if (d > 20*K6_BUG_LOOP) - printk("system stability may be impaired when more than 32 MB are used.\n"); - else - printk("probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); - } - - /* K6 with old style WHCR */ - if (c->x86_model < 8 || - (c->x86_model == 8 && c->x86_mask < 8)) { - /* We can only write allocate on the low 508Mb */ - if (mbytes > 508) - mbytes = 508; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0x0000FFFF) == 0) { - unsigned long flags; - l = (1<<0)|((mbytes/4)<<1); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", - mbytes); - } - break; - } - - if ((c->x86_model == 8 && c->x86_mask > 7) || - c->x86_model == 9 || c->x86_model == 13) { - /* The more serious chips .. */ - - if (mbytes > 4092) - mbytes = 4092; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0xFFFF0000) == 0) { - unsigned long flags; - l = ((mbytes>>2)<<22)|(1<<16); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", - mbytes); - } - - /* Set MTRR capability flag if appropriate */ - if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) - set_cpu_cap(c, X86_FEATURE_K6_MTRR); - break; - } - - if (c->x86_model == 10) { - /* AMD Geode LX is model 10 */ - /* placeholder for any needed mods */ - break; - } - break; - case 6: /* An Athlon/Duron */ +#ifdef CONFIG_X86_64 + /* On C+ stepping K8 rep microcode works well for copy/memset */ + if (c->x86 == 0xf) { + u32 level; - /* - * Bit 15 of Athlon specific MSR 15, needs to be 0 - * to enable SSE on Palomino/Morgan/Barton CPU's. - * If the BIOS didn't enable it already, enable it here. - */ - if (c->x86_model >= 6 && c->x86_model <= 10) { - if (!cpu_has(c, X86_FEATURE_XMM)) { - printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); - rdmsr(MSR_K7_HWCR, l, h); - l &= ~0x00008000; - wrmsr(MSR_K7_HWCR, l, h); - set_cpu_cap(c, X86_FEATURE_XMM); - } - } - - /* - * It's been determined by AMD that Athlons since model 8 stepping 1 - * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx - * As per AMD technical note 27212 0.2 - */ - if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { - rdmsr(MSR_K7_CLK_CTL, l, h); - if ((l & 0xfff00000) != 0x20000000) { - printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, - ((l & 0x000fffff)|0x20000000)); - wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); - } - } - break; + level = cpuid_eax(1); + if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); } + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); +#else + + /* + * FIXME: We should handle the K5 here. Set up the write + * range and also turn on MSR 83 bits 4 and 31 (write alloc, + * no bus pipeline) + */ switch (c->x86) { - case 15: - /* Use K8 tuning for Fam10h and Fam11h */ - case 0x10: - case 0x11: - set_cpu_cap(c, X86_FEATURE_K8); + case 4: + init_amd_k5(c); break; - case 6: - set_cpu_cap(c, X86_FEATURE_K7); + case 5: + init_amd_k6(c); + break; + case 6: /* An Athlon/Duron */ + init_amd_k7(c); break; } + + /* K6s reports MCEs but don't actually have all the MSRs */ + if (c->x86 < 6) + clear_cpu_cap(c, X86_FEATURE_MCE); +#endif + + /* Enable workaround for FXSAVE leak */ if (c->x86 >= 6) set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - display_cacheinfo(c); - - if (cpuid_eax(0x80000000) >= 0x80000008) - c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (!c->x86_model_id[0]) { + switch (c->x86) { + case 0xf: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } -#ifdef CONFIG_X86_HT - /* - * On a AMD multi core setup the lower bits of the APIC id - * distinguish the cores. - */ - if (c->x86_max_cores > 1) { - int cpu = smp_processor_id(); - unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf; + display_cacheinfo(c); - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1); - c->phys_proc_id >>= bits; - printk(KERN_INFO "CPU %d(%d) -> Core %d\n", - cpu, c->x86_max_cores, c->cpu_core_id); + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) { + amd_detect_cmp(c); + srat_detect_node(c); } + +#ifdef CONFIG_X86_32 + detect_ht(c); #endif - if (cpuid_eax(0x80000000) >= 0x80000006) { - if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000)) + if (c->extended_cpuid_level >= 0x80000006) { + if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000)) num_cache_leaves = 4; else num_cache_leaves = 3; } -#ifdef CONFIG_X86_LOCAL_APIC - if (amd_apic_timer_broken()) - local_apic_timer_disabled = 1; -#endif - - /* K6s reports MCEs but don't actually have all the MSRs */ - if (c->x86 < 6) - clear_cpu_cap(c, X86_FEATURE_MCE); + if (c->x86 >= 0xf && c->x86 <= 0x11) + set_cpu_cap(c, X86_FEATURE_K8); - if (cpu_has_xmm2) + if (cpu_has_xmm2) { + /* MFENCE stops RDTSC speculation */ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + } + +#ifdef CONFIG_X86_64 + if (c->x86 == 0x10) { + /* do this for boot cpu */ + if (c == &boot_cpu_data) + check_enable_amd_mmconf_dmi(); + + fam10h_check_enable_mmcfg(); + } + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { + printk(KERN_DEBUG "tseg: %010llx\n", tseg); + if ((tseg>>PMD_SHIFT) < + (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) || + ((tseg>>PMD_SHIFT) < + (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) && + (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT)))) + set_memory_4k((unsigned long)__va(tseg), 1); + } + } +#endif } +#ifdef CONFIG_X86_32 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* AMD errata T13 (order #21922) */ @@ -322,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int } return size; } +#endif static struct cpu_dev amd_cpu_dev __cpuinitdata = { .c_vendor = "AMD", .c_ident = { "AuthenticAMD" }, +#ifdef CONFIG_X86_32 .c_models = { { .vendor = X86_VENDOR_AMD, .family = 4, .model_names = { @@ -338,9 +463,11 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = { } }, }, + .c_size_cache = amd_size_cache, +#endif .c_early_init = early_init_amd, .c_init = init_amd, - .c_size_cache = amd_size_cache, + .c_x86_vendor = X86_VENDOR_AMD, }; -cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); +cpu_dev_register(amd_cpu_dev); diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5523b..c8e315f1aa8 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -50,6 +50,8 @@ static double __initdata y = 3145727.0; */ static void __init check_fpu(void) { + s32 fdiv_bug; + if (!boot_cpu_data.hard_math) { #ifndef CONFIG_MATH_EMULATION printk(KERN_EMERG "No coprocessor found and no math emulation present.\n"); @@ -59,8 +61,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -70,8 +76,10 @@ static void __init check_fpu(void) "fistpl %0\n\t" "fwait\n\t" "fninit" - : "=m" (*&boot_cpu_data.fdiv_bug) + : "=m" (*&fdiv_bug) : "m" (*&x), "m" (*&y)); + + boot_cpu_data.fdiv_bug = fdiv_bug; if (boot_cpu_data.fdiv_bug) printk("Hmm, FPU with FDIV bug.\n"); } @@ -108,10 +116,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -122,13 +135,7 @@ static void __init check_popad(void) * (for due to lack of "invlpg" and working WP on a i386) * - In order to run on anything without a TSC, we need to be * compiled for a i486. - * - In order to support the local APIC on a buggy Pentium machine, - * we need to be compiled with CONFIG_X86_GOOD_APIC disabled, - * which happens implicitly if compiled for a Pentium or lower - * (unless an advanced selection of CPU features is used) as an - * otherwise config implies a properly working local APIC without - * the need to do extra reads from the APIC. -*/ + */ static void __init check_config(void) { @@ -137,25 +144,11 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif - -/* - * If we were told we had a good local APIC, check for buggy Pentia, - * i.e. all B steppings and the C2 stepping of P54C when using their - * integrated APIC (see 11AP erratum in "Pentium Processor - * Specification Update"). - */ -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC) - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL - && cpu_has_apic - && boot_cpu_data.x86 == 5 - && boot_cpu_data.x86_model == 2 - && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11)) - panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!"); -#endif } @@ -170,6 +163,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c index 9a3ed0649d4..9a3ed0649d4 100644 --- a/arch/x86/kernel/bugs_64.c +++ b/arch/x86/kernel/cpu/bugs_64.c diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index e0f45edd6a5..89bfdd9cacc 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -289,7 +289,6 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) if (c->x86_model >= 6 && c->x86_model < 9) set_cpu_cap(c, X86_FEATURE_3DNOW); - get_model_name(c); display_cacheinfo(c); } @@ -314,6 +313,16 @@ enum { EAMD3D = 1<<20, }; +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + switch (c->x86) { + case 5: + /* Emulate MTRRs using Centaur's MCR. */ + set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); + break; + } +} + static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { @@ -462,8 +471,10 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, .c_init = init_centaur, .c_size_cache = centaur_size_cache, + .c_x86_vendor = X86_VENDOR_CENTAUR, }; -cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); +cpu_dev_register(centaur_cpu_dev); diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 00000000000..a1625f5a1e7 --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,37 @@ +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/cpufeature.h> +#include <asm/processor.h> + +#include "cpu.h" + +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + + set_cpu_cap(c, X86_FEATURE_SYSENTER32); +} + +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + early_init_centaur(c); + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} + +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { + .c_vendor = "Centaur", + .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, + .c_init = init_centaur, + .c_x86_vendor = X86_VENDOR_CENTAUR, +}; + +cpu_dev_register(centaur_cpu_dev); + diff --git a/arch/x86/kernel/cpu/cmpxchg.c b/arch/x86/kernel/cpu/cmpxchg.c new file mode 100644 index 00000000000..2056ccf572c --- /dev/null +++ b/arch/x86/kernel/cpu/cmpxchg.c @@ -0,0 +1,72 @@ +/* + * cmpxchg*() fallbacks for CPU not supporting these instructions + */ + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/module.h> + +#ifndef CONFIG_X86_CMPXCHG +unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) +{ + u8 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u8 *)ptr; + if (prev == old) + *(u8 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u8); + +unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) +{ + u16 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u16 *)ptr; + if (prev == old) + *(u16 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u16); + +unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) +{ + u32 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u32 *)ptr; + if (prev == old) + *(u32 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u32); +#endif + +#ifndef CONFIG_X86_CMPXCHG64 +unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new) +{ + u64 prev; + unsigned long flags; + + /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u64 *)ptr; + if (prev == old) + *(u64 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_486_u64); +#endif + diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d0463a94624..fb789dd9e69 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1,27 +1,62 @@ #include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> +#include <linux/bootmem.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/kgdb.h> +#include <linux/topology.h> #include <linux/delay.h> #include <linux/smp.h> -#include <linux/module.h> #include <linux/percpu.h> -#include <linux/bootmem.h> -#include <asm/processor.h> #include <asm/i387.h> #include <asm/msr.h> #include <asm/io.h> +#include <asm/linkage.h> #include <asm/mmu_context.h> #include <asm/mtrr.h> #include <asm/mce.h> #include <asm/pat.h> +#include <asm/asm.h> +#include <asm/numa.h> #ifdef CONFIG_X86_LOCAL_APIC #include <asm/mpspec.h> #include <asm/apic.h> #include <mach_apic.h> +#include <asm/genapic.h> #endif +#include <asm/pda.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> +#include <asm/atomic.h> +#include <asm/proto.h> +#include <asm/sections.h> +#include <asm/setup.h> + #include "cpu.h" +static struct cpu_dev *this_cpu __cpuinitdata; + +#ifdef CONFIG_X86_64 +/* We need valid kernel segments for data and code in long mode too + * IRET will check the segment types kkeil 2000/10/28 + * Also sysret mandates a special GDT layout + */ +/* The TLS descriptors are currently at a different place compared to i386. + Hopefully nobody expects them at a fixed place (Wine?) */ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { + [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, + [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, + [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, + [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, + [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, + [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, +} }; +#else +DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, @@ -55,17 +90,150 @@ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, } }; +#endif EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - +#ifdef CONFIG_X86_32 static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; -struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; +static int __init cachesize_setup(char *str) +{ + get_option(&str, &cachesize_override); + return 1; +} +__setup("cachesize=", cachesize_setup); + +static int __init x86_fxsr_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_FXSR); + setup_clear_cpu_cap(X86_FEATURE_XMM); + return 1; +} +__setup("nofxsr", x86_fxsr_setup); + +static int __init x86_sep_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_SEP); + return 1; +} +__setup("nosep", x86_sep_setup); + +/* Standard macro to see if a specific flag is changeable */ +static inline int flag_is_changeable_p(u32 flag) +{ + u32 f1, f2; + + asm("pushfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "movl %0,%1\n\t" + "xorl %2,%0\n\t" + "pushl %0\n\t" + "popfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "popfl\n\t" + : "=&r" (f1), "=&r" (f2) + : "ir" (flag)); + + return ((f1^f2) & flag) != 0; +} + +/* Probe for the CPUID instruction */ +static int __cpuinit have_cpuid_p(void) +{ + return flag_is_changeable_p(X86_EFLAGS_ID); +} + +static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { + /* Disable processor serial number */ + unsigned long lo, hi; + rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + lo |= 0x200000; + wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + printk(KERN_NOTICE "CPU serial number disabled.\n"); + clear_cpu_cap(c, X86_FEATURE_PN); + + /* Disabling the serial number may affect the cpuid level */ + c->cpuid_level = cpuid_eax(0); + } +} + +static int __init x86_serial_nr_setup(char *s) +{ + disable_x86_serial_nr = 0; + return 1; +} +__setup("serialnumber", x86_serial_nr_setup); +#else +static inline int flag_is_changeable_p(u32 flag) +{ + return 1; +} +/* Probe for the CPUID instruction */ +static inline int have_cpuid_p(void) +{ + return 1; +} +static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ +} +#endif + +/* + * Naming convention should be: <Name> [(<Codename>)] + * This table only is used unless init_<vendor>() below doesn't set it; + * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used + * + */ + +/* Look up CPU names by table lookup. */ +static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +{ + struct cpu_model_info *info; + + if (c->x86_model >= 16) + return NULL; /* Range check */ + + if (!this_cpu) + return NULL; + + info = this_cpu->c_models; + + while (info && info->family) { + if (info->family == c->x86) + return info->model_names[c->x86_model]; + info++; + } + return NULL; /* Not found */ +} + +__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; + +/* Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. */ +void switch_to_new_gdt(void) +{ + struct desc_ptr gdt_descr; + + gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); +#ifdef CONFIG_X86_32 + asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); +#endif +} + +static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; static void __cpuinit default_init(struct cpuinfo_x86 *c) { +#ifdef CONFIG_X86_64 + display_cacheinfo(c); +#else /* Not much we can do here... */ /* Check if at least it has cpuid */ if (c->cpuid_level == -1) { @@ -75,28 +243,22 @@ static void __cpuinit default_init(struct cpuinfo_x86 *c) else if (c->x86 == 3) strcpy(c->x86_model_id, "386"); } +#endif } static struct cpu_dev __cpuinitdata default_cpu = { .c_init = default_init, .c_vendor = "Unknown", + .c_x86_vendor = X86_VENDOR_UNKNOWN, }; -static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; -static int __init cachesize_setup(char *str) -{ - get_option(&str, &cachesize_override); - return 1; -} -__setup("cachesize=", cachesize_setup); - -int __cpuinit get_model_name(struct cpuinfo_x86 *c) +static void __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; char *p, *q; - if (cpuid_eax(0x80000000) < 0x80000004) - return 0; + if (c->extended_cpuid_level < 0x80000004) + return; v = (unsigned int *) c->x86_model_id; cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); @@ -115,30 +277,34 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c) while (q <= &c->x86_model_id[48]) *q++ = '\0'; /* Zero-pad the rest */ } - - return 1; } - void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { - unsigned int n, dummy, ecx, edx, l2size; + unsigned int n, dummy, ebx, ecx, edx, l2size; - n = cpuid_eax(0x80000000); + n = c->extended_cpuid_level; if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); + cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24)+(edx>>24); + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + c->x86_cache_size = (ecx>>24) + (edx>>24); +#ifdef CONFIG_X86_64 + /* On K8 L1 TLB is inclusive, so don't count it */ + c->x86_tlbsize = 0; +#endif } if (n < 0x80000006) /* Some chips just has a large L1. */ return; - ecx = cpuid_ecx(0x80000006); + cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); l2size = ecx >> 16; +#ifdef CONFIG_X86_64 + c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); +#else /* do processor-specific cache resizing */ if (this_cpu->c_size_cache) l2size = this_cpu->c_size_cache(c, l2size); @@ -149,116 +315,106 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) if (l2size == 0) return; /* Again, no L2 cache is possible */ +#endif c->x86_cache_size = l2size; printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - l2size, ecx & 0xFF); + l2size, ecx & 0xFF); } -/* - * Naming convention should be: <Name> [(<Codename>)] - * This table only is used unless init_<vendor>() below doesn't set it; - * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used - * - */ - -/* Look up CPU names by table lookup. */ -static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +void __cpuinit detect_ht(struct cpuinfo_x86 *c) { - struct cpu_model_info *info; +#ifdef CONFIG_X86_HT + u32 eax, ebx, ecx, edx; + int index_msb, core_bits; - if (c->x86_model >= 16) - return NULL; /* Range check */ + if (!cpu_has(c, X86_FEATURE_HT)) + return; - if (!this_cpu) - return NULL; + if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) + goto out; - info = this_cpu->c_models; + if (cpu_has(c, X86_FEATURE_XTOPOLOGY)) + return; - while (info && info->family) { - if (info->family == c->x86) - return info->model_names[c->x86_model]; - info++; + cpuid(1, &eax, &ebx, &ecx, &edx); + + smp_num_siblings = (ebx & 0xff0000) >> 16; + + if (smp_num_siblings == 1) { + printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + } else if (smp_num_siblings > 1) { + + if (smp_num_siblings > NR_CPUS) { + printk(KERN_WARNING "CPU: Unsupported number of siblings %d", + smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); +#ifdef CONFIG_X86_64 + c->phys_proc_id = phys_pkg_id(index_msb); +#else + c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); +#endif + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings); + + core_bits = get_count_order(c->x86_max_cores); + +#ifdef CONFIG_X86_64 + c->cpu_core_id = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); +#else + c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & + ((1 << core_bits) - 1); +#endif } - return NULL; /* Not found */ -} +out: + if ((c->x86_max_cores * smp_num_siblings) > 1) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + } +#endif +} -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; int i; static int printed; for (i = 0; i < X86_VENDOR_NUM; i++) { - if (cpu_devs[i]) { - if (!strcmp(v, cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v, cpu_devs[i]->c_ident[1]))) { - c->x86_vendor = i; - if (!early) - this_cpu = cpu_devs[i]; - return; - } + if (!cpu_devs[i]) + break; + + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + this_cpu = cpu_devs[i]; + c->x86_vendor = this_cpu->c_x86_vendor; + return; } } + if (!printed) { printed++; - printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v); printk(KERN_ERR "CPU: Your system may be unstable.\n"); } + c->x86_vendor = X86_VENDOR_UNKNOWN; this_cpu = &default_cpu; } - -static int __init x86_fxsr_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_FXSR); - setup_clear_cpu_cap(X86_FEATURE_XMM); - return 1; -} -__setup("nofxsr", x86_fxsr_setup); - - -static int __init x86_sep_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_SEP); - return 1; -} -__setup("nosep", x86_sep_setup); - - -/* Standard macro to see if a specific flag is changeable */ -static inline int flag_is_changeable_p(u32 flag) -{ - u32 f1, f2; - - asm("pushfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "movl %0,%1\n\t" - "xorl %2,%0\n\t" - "pushl %0\n\t" - "popfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "popfl\n\t" - : "=&r" (f1), "=&r" (f2) - : "ir" (flag)); - - return ((f1^f2) & flag) != 0; -} - - -/* Probe for the CPUID instruction */ -static int __cpuinit have_cpuid_p(void) -{ - return flag_is_changeable_p(X86_EFLAGS_ID); -} - -void __init cpu_detect(struct cpuinfo_x86 *c) +void __cpuinit cpu_detect(struct cpuinfo_x86 *c) { /* Get vendor name */ cpuid(0x00000000, (unsigned int *)&c->cpuid_level, @@ -267,50 +423,87 @@ void __init cpu_detect(struct cpuinfo_x86 *c) (unsigned int *)&c->x86_vendor_id[4]); c->x86 = 4; + /* Intel-defined flags: level 0x00000001 */ if (c->cpuid_level >= 0x00000001) { u32 junk, tfms, cap0, misc; cpuid(0x00000001, &tfms, &misc, &junk, &cap0); - c->x86 = (tfms >> 8) & 15; - c->x86_model = (tfms >> 4) & 15; + c->x86 = (tfms >> 8) & 0xf; + c->x86_model = (tfms >> 4) & 0xf; + c->x86_mask = tfms & 0xf; if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - c->x86_mask = tfms & 15; + c->x86_model += ((tfms >> 16) & 0xf) << 4; if (cap0 & (1<<19)) { - c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; + c->x86_cache_alignment = c->x86_clflush_size; } } } -static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) + +static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) { u32 tfms, xlvl; - unsigned int ebx; + u32 ebx; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - if (have_cpuid_p()) { - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - } + /* Intel-defined flags: level 0x00000001 */ + if (c->cpuid_level >= 0x00000001) { + u32 capability, excap; + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); + c->x86_capability[0] = capability; + c->x86_capability[4] = excap; + } - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } + /* AMD-defined flags: level 0x80000001 */ + xlvl = cpuid_eax(0x80000000); + c->extended_cpuid_level = xlvl; + if ((xlvl & 0xffff0000) == 0x80000000) { + if (xlvl >= 0x80000001) { + c->x86_capability[1] = cpuid_edx(0x80000001); + c->x86_capability[6] = cpuid_ecx(0x80000001); } + } +#ifdef CONFIG_X86_64 + if (c->extended_cpuid_level >= 0x80000008) { + u32 eax = cpuid_eax(0x80000008); + + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; } +#endif + + if (c->extended_cpuid_level >= 0x80000007) + c->x86_power = cpuid_edx(0x80000007); } +static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_32 + int i; + + /* + * First of all, decide if this is a 486 or higher + * It's a 486 if we can modify the AC flag + */ + if (flag_is_changeable_p(X86_EFLAGS_AC)) + c->x86 = 4; + else + c->x86 = 3; + + for (i = 0; i < X86_VENDOR_NUM; i++) + if (cpu_devs[i] && cpu_devs[i]->c_identify) { + c->x86_vendor_id[0] = 0; + cpu_devs[i]->c_identify(c); + if (c->x86_vendor_id[0]) { + get_cpu_vendor(c); + break; + } + } +#endif +} + /* * Do minimum CPU detection early. * Fields really needed: vendor, cpuid_level, family, model, mask, @@ -320,144 +513,147 @@ static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) * WARNING: this function is only called on the BP. Don't add code here * that is supposed to run on all CPUs. */ -static void __init early_cpu_detect(void) +static void __init early_identify_cpu(struct cpuinfo_x86 *c) { - struct cpuinfo_x86 *c = &boot_cpu_data; - - c->x86_cache_alignment = 32; +#ifdef CONFIG_X86_64 + c->x86_clflush_size = 64; +#else c->x86_clflush_size = 32; +#endif + c->x86_cache_alignment = c->x86_clflush_size; + + memset(&c->x86_capability, 0, sizeof c->x86_capability); + c->extended_cpuid_level = 0; if (!have_cpuid_p()) + identify_cpu_without_cpuid(c); + + /* cyrix could have cpuid enabled via c_identify()*/ + if (!have_cpuid_p()) return; cpu_detect(c); - get_cpu_vendor(c, 1); + get_cpu_vendor(c); - if (c->x86_vendor != X86_VENDOR_UNKNOWN && - cpu_devs[c->x86_vendor]->c_early_init) - cpu_devs[c->x86_vendor]->c_early_init(c); + get_cpu_cap(c); - early_get_cap(c); + if (this_cpu->c_early_init) + this_cpu->c_early_init(c); + + validate_pat_support(c); } -static void __cpuinit generic_identify(struct cpuinfo_x86 *c) +void __init early_cpu_init(void) { - u32 tfms, xlvl; - unsigned int ebx; - - if (have_cpuid_p()) { - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c, 0); - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - c->x86 = (tfms >> 8) & 15; - c->x86_model = (tfms >> 4) & 15; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - c->x86_mask = tfms & 15; - c->initial_apicid = (ebx >> 24) & 0xFF; -#ifdef CONFIG_X86_HT - c->apicid = phys_pkg_id(c->initial_apicid, 0); - c->phys_proc_id = c->initial_apicid; -#else - c->apicid = c->initial_apicid; -#endif - if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) - c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } - - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ + struct cpu_dev **cdev; + int count = 0; + + printk("KERNEL supported cpus:\n"); + for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { + struct cpu_dev *cpudev = *cdev; + unsigned int j; + + if (count >= X86_VENDOR_NUM) + break; + cpu_devs[count] = cpudev; + count++; + + for (j = 0; j < 2; j++) { + if (!cpudev->c_ident[j]) + continue; + printk(" %s %s\n", cpudev->c_vendor, + cpudev->c_ident[j]); } - - init_scattered_cpuid_features(c); } + early_identify_cpu(&boot_cpu_data); } -static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +/* + * The NOPL instruction is supposed to exist on all CPUs with + * family >= 6; unfortunately, that's not true in practice because + * of early VIA chips and (more importantly) broken virtualizers that + * are not easy to detect. In the latter case it doesn't even *fail* + * reliably, so probing for it doesn't even work. Disable it completely + * unless we can find a reliable way to detect all the broken cases. + */ +static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) { - if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { - /* Disable processor serial number */ - unsigned long lo, hi; - rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - lo |= 0x200000; - wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - printk(KERN_NOTICE "CPU serial number disabled.\n"); - clear_cpu_cap(c, X86_FEATURE_PN); - - /* Disabling the serial number may affect the cpuid level */ - c->cpuid_level = cpuid_eax(0); - } + clear_cpu_cap(c, X86_FEATURE_NOPL); } -static int __init x86_serial_nr_setup(char *s) +static void __cpuinit generic_identify(struct cpuinfo_x86 *c) { - disable_x86_serial_nr = 0; - return 1; -} -__setup("serialnumber", x86_serial_nr_setup); + c->extended_cpuid_level = 0; + + if (!have_cpuid_p()) + identify_cpu_without_cpuid(c); + /* cyrix could have cpuid enabled via c_identify()*/ + if (!have_cpuid_p()) + return; + cpu_detect(c); + + get_cpu_vendor(c); + + get_cpu_cap(c); + + if (c->cpuid_level >= 0x00000001) { + c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF; +#ifdef CONFIG_X86_32 +# ifdef CONFIG_X86_HT + c->apicid = phys_pkg_id(c->initial_apicid, 0); +# else + c->apicid = c->initial_apicid; +# endif +#endif + +#ifdef CONFIG_X86_HT + c->phys_proc_id = c->initial_apicid; +#endif + } + + get_model_name(c); /* Default name */ + + init_scattered_cpuid_features(c); + detect_nopl(c); +} /* * This does the hard work of actually picking apart the CPU stuff... */ -void __cpuinit identify_cpu(struct cpuinfo_x86 *c) +static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) { int i; c->loops_per_jiffy = loops_per_jiffy; c->x86_cache_size = -1; c->x86_vendor = X86_VENDOR_UNKNOWN; - c->cpuid_level = -1; /* CPUID not detected */ c->x86_model = c->x86_mask = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ c->x86_model_id[0] = '\0'; /* Unset */ c->x86_max_cores = 1; + c->x86_coreid_bits = 0; +#ifdef CONFIG_X86_64 + c->x86_clflush_size = 64; +#else + c->cpuid_level = -1; /* CPUID not detected */ c->x86_clflush_size = 32; +#endif + c->x86_cache_alignment = c->x86_clflush_size; memset(&c->x86_capability, 0, sizeof c->x86_capability); - if (!have_cpuid_p()) { - /* - * First of all, decide if this is a 486 or higher - * It's a 486 if we can modify the AC flag - */ - if (flag_is_changeable_p(X86_EFLAGS_AC)) - c->x86 = 4; - else - c->x86 = 3; - } - generic_identify(c); if (this_cpu->c_identify) this_cpu->c_identify(c); +#ifdef CONFIG_X86_64 + c->apicid = phys_pkg_id(0); +#endif + /* * Vendor-specific initialization. In this section we * canonicalize the feature flags, meaning if there are @@ -491,6 +687,10 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86, c->x86_model); } +#ifdef CONFIG_X86_64 + detect_ht(c); +#endif + /* * On SMP, boot_cpu_data holds the common feature set between * all CPUs; so make sure that we indicate which features are @@ -499,7 +699,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) */ if (c != &boot_cpu_data) { /* AND the already accumulated flags with these */ - for (i = 0 ; i < NCAPINTS ; i++) + for (i = 0; i < NCAPINTS; i++) boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; } @@ -507,72 +707,79 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) for (i = 0; i < NCAPINTS; i++) c->x86_capability[i] &= ~cleared_cpu_caps[i]; +#ifdef CONFIG_X86_MCE /* Init Machine Check Exception if available. */ mcheck_init(c); +#endif select_idle_routine(c); + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + numa_add_cpu(smp_processor_id()); +#endif } void __init identify_boot_cpu(void) { identify_cpu(&boot_cpu_data); +#ifdef CONFIG_X86_32 sysenter_setup(); enable_sep_cpu(); +#endif } void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) { BUG_ON(c == &boot_cpu_data); identify_cpu(c); +#ifdef CONFIG_X86_32 enable_sep_cpu(); +#endif mtrr_ap_init(); } -#ifdef CONFIG_X86_HT -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) - return; - - smp_num_siblings = (ebx & 0xff0000) >> 16; +struct msr_range { + unsigned min; + unsigned max; +}; - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { +static struct msr_range msr_range_array[] __cpuinitdata = { + { 0x00000000, 0x00000418}, + { 0xc0000000, 0xc000040b}, + { 0xc0010000, 0xc0010142}, + { 0xc0011000, 0xc001103b}, +}; - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of the " - "siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; +static void __cpuinit print_cpu_msr(void) +{ + unsigned index; + u64 val; + int i; + unsigned index_min, index_max; + + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; + for (index = index_min; index < index_max; index++) { + if (rdmsrl_amd_safe(index, &val)) + continue; + printk(KERN_INFO " MSR%08x: %016llx\n", index, val); } + } +} - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); - - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings) ; +static int show_msr __cpuinitdata; +static __init int setup_show_msr(char *arg) +{ + int num; - core_bits = get_count_order(c->x86_max_cores); + get_option(&arg, &num); - c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & - ((1 << core_bits) - 1); - - if (c->x86_max_cores > 1) - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } + if (num > 0) + show_msr = num; + return 1; } -#endif +__setup("show_msr=", setup_show_msr); static __init int setup_noclflush(char *arg) { @@ -591,17 +798,25 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) vendor = c->x86_vendor_id; if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) - printk("%s ", vendor); + printk(KERN_CONT "%s ", vendor); - if (!c->x86_model_id[0]) - printk("%d86", c->x86); + if (c->x86_model_id[0]) + printk(KERN_CONT "%s", c->x86_model_id); else - printk("%s", c->x86_model_id); + printk(KERN_CONT "%d86", c->x86); if (c->x86_mask || c->cpuid_level >= 0) - printk(" stepping %02x\n", c->x86_mask); + printk(KERN_CONT " stepping %02x\n", c->x86_mask); else - printk("\n"); + printk(KERN_CONT "\n"); + +#ifdef CONFIG_SMP + if (c->cpu_index < show_msr) + print_cpu_msr(); +#else + if (show_msr) + print_cpu_msr(); +#endif } static __init int setup_disablecpuid(char *arg) @@ -617,19 +832,89 @@ __setup("clearcpuid=", setup_disablecpuid); cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; -void __init early_cpu_init(void) +#ifdef CONFIG_X86_64 +struct x8664_pda **_cpu_pda __read_mostly; +EXPORT_SYMBOL(_cpu_pda); + +struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; + +char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; + +void __cpuinit pda_init(int cpu) +{ + struct x8664_pda *pda = cpu_pda(cpu); + + /* Setup up data that may be needed in __get_free_pages early */ + loadsegment(fs, 0); + loadsegment(gs, 0); + /* Memory clobbers used to order PDA accessed */ + mb(); + wrmsrl(MSR_GS_BASE, pda); + mb(); + + pda->cpunumber = cpu; + pda->irqcount = -1; + pda->kernelstack = (unsigned long)stack_thread_info() - + PDA_STACKOFFSET + THREAD_SIZE; + pda->active_mm = &init_mm; + pda->mmu_state = 0; + + if (cpu == 0) { + /* others are initialized in smpboot.c */ + pda->pcurrent = &init_task; + pda->irqstackptr = boot_cpu_stack; + pda->irqstackptr += IRQSTACKSIZE - 64; + } else { + if (!pda->irqstackptr) { + pda->irqstackptr = (char *) + __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); + if (!pda->irqstackptr) + panic("cannot allocate irqstack for cpu %d", + cpu); + pda->irqstackptr += IRQSTACKSIZE - 64; + } + + if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) + pda->nodenumber = cpu_to_node(cpu); + } +} + +char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + + DEBUG_STKSZ] __page_aligned_bss; + +extern asmlinkage void ignore_sysret(void); + +/* May not be marked __init: used by software suspend */ +void syscall_init(void) { - struct cpu_vendor_dev *cvdev; + /* + * LSTAR and STAR live in a bit strange symbiosis. + * They both write to the same internal register. STAR allows to + * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. + */ + wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); + wrmsrl(MSR_LSTAR, system_call); + wrmsrl(MSR_CSTAR, ignore_sysret); - for (cvdev = __x86cpuvendor_start ; - cvdev < __x86cpuvendor_end ; - cvdev++) - cpu_devs[cvdev->vendor] = cvdev->cpu_dev; +#ifdef CONFIG_IA32_EMULATION + syscall32_cpu_init(); +#endif - early_cpu_detect(); - validate_pat_support(&boot_cpu_data); + /* Flags to clear on syscall */ + wrmsrl(MSR_SYSCALL_MASK, + X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); } +unsigned long kernel_eflags; + +/* + * Copies of the original ist values from the tss are only accessed during + * debugging, no special alignment required. + */ +DEFINE_PER_CPU(struct orig_ist, orig_ist); + +#else + /* Make sure %fs is initialized properly in idle threads */ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) { @@ -637,25 +922,136 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) regs->fs = __KERNEL_PERCPU; return regs; } - -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ -void switch_to_new_gdt(void) -{ - struct desc_ptr gdt_descr; - - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); - asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); -} +#endif /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT * and IDT. We reload them nevertheless, this function acts as a * 'CPU state barrier', nothing should get across. + * A lot of state is already set up in PDA init for 64 bit */ +#ifdef CONFIG_X86_64 +void __cpuinit cpu_init(void) +{ + int cpu = stack_smp_processor_id(); + struct tss_struct *t = &per_cpu(init_tss, cpu); + struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); + unsigned long v; + char *estacks = NULL; + struct task_struct *me; + int i; + + /* CPU 0 is initialised in head64.c */ + if (cpu != 0) + pda_init(cpu); + else + estacks = boot_exception_stacks; + + me = current; + + if (cpu_test_and_set(cpu, cpu_initialized)) + panic("CPU#%d already initialized!\n", cpu); + + printk(KERN_INFO "Initializing CPU#%d\n", cpu); + + clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); + + /* + * Initialize the per-CPU GDT with the boot GDT, + * and set up the GDT descriptor: + */ + + switch_to_new_gdt(); + load_idt((const struct desc_ptr *)&idt_descr); + + memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); + syscall_init(); + + wrmsrl(MSR_FS_BASE, 0); + wrmsrl(MSR_KERNEL_GS_BASE, 0); + barrier(); + + check_efer(); + if (cpu != 0 && x2apic) + enable_x2apic(); + + /* + * set up and load the per-CPU TSS + */ + if (!orig_ist->ist[0]) { + static const unsigned int order[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + }; + for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (cpu) { + estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); + if (!estacks) + panic("Cannot allocate exception " + "stack %ld %d\n", v, cpu); + } + estacks += PAGE_SIZE << order[v]; + orig_ist->ist[v] = t->x86_tss.ist[v] = + (unsigned long)estacks; + } + } + + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + /* + * <= is required because the CPU will access up to + * 8 bits beyond the end of the IO permission bitmap. + */ + for (i = 0; i <= IO_BITMAP_LONGS; i++) + t->io_bitmap[i] = ~0UL; + + atomic_inc(&init_mm.mm_count); + me->active_mm = &init_mm; + if (me->mm) + BUG(); + enter_lazy_tlb(&init_mm, me); + + load_sp0(t, ¤t->thread); + set_tss_desc(cpu, t); + load_TR_desc(); + load_LDT(&init_mm.context); + +#ifdef CONFIG_KGDB + /* + * If the kgdb is connected no debug regs should be altered. This + * is only applicable when KGDB and a KGDB I/O module are built + * into the kernel and you are using early debugging with + * kgdbwait. KGDB will control the kernel HW breakpoint registers. + */ + if (kgdb_connected && arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + else { +#endif + /* + * Clear all 6 debug registers: + */ + + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); +#ifdef CONFIG_KGDB + /* If the kgdb is connected no debug regs should be altered. */ + } +#endif + + fpu_init(); + + raw_local_save_flags(kernel_eflags); + + if (is_uv_system()) + uv_cpu_init(); +} + +#else + void __cpuinit cpu_init(void) { int cpu = smp_processor_id(); @@ -709,19 +1105,21 @@ void __cpuinit cpu_init(void) /* * Force FPU initialization: */ - current_thread_info()->status = 0; + if (cpu_has_xsave) + current_thread_info()->status = TS_XSAVE; + else + current_thread_info()->status = 0; clear_used_math(); mxcsr_feature_mask_init(); -} -#ifdef CONFIG_HOTPLUG_CPU -void __cpuinit cpu_uninit(void) -{ - int cpu = raw_smp_processor_id(); - cpu_clear(cpu, cpu_initialized); + /* + * Boot processor to setup the FP and extended state context info. + */ + if (!smp_processor_id()) + init_thread_xstate(); - /* lazy TLB state */ - per_cpu(cpu_tlbstate, cpu).state = 0; - per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; + xsave_init(); } + + #endif diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 783691b2a73..de4094a3921 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -1,3 +1,6 @@ +#ifndef ARCH_X86_CPU_H + +#define ARCH_X86_CPU_H struct cpu_model_info { int vendor; @@ -18,21 +21,16 @@ struct cpu_dev { void (*c_init)(struct cpuinfo_x86 * c); void (*c_identify)(struct cpuinfo_x86 * c); unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size); + int c_x86_vendor; }; -extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM]; - -struct cpu_vendor_dev { - int vendor; - struct cpu_dev *cpu_dev; -}; - -#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \ - static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \ - __attribute__((__section__(".x86cpuvendor.init"))) = \ - { cpu_vendor_id, cpu_dev } +#define cpu_dev_register(cpu_devX) \ + static struct cpu_dev *__cpu_dev_##cpu_devX __used \ + __attribute__((__section__(".x86_cpu_dev.init"))) = \ + &cpu_devX; -extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; +extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[]; -extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); + +#endif diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig index cb7a5715596..efae3b22a0f 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -235,9 +235,9 @@ config X86_LONGHAUL If in doubt, say N. config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + tristate "VIA C7 Enhanced PowerSaver" select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL + depends on X86_32 help This adds the CPUFreq driver for VIA C7 processors. diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index b0c8208df9f..c24c4a487b7 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -202,7 +202,7 @@ static void drv_write(struct drv_cmd *cmd) cpumask_t saved_mask = current->cpus_allowed; unsigned int i; - for_each_cpu_mask(i, cmd->mask) { + for_each_cpu_mask_nr(i, cmd->mask) { set_cpus_allowed_ptr(current, &cpumask_of_cpu(i)); do_drv_write(cmd); } @@ -256,7 +256,8 @@ static u32 get_cur_val(const cpumask_t *mask) * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and * no meaning should be associated with absolute values of these MSRs. */ -static unsigned int get_measured_perf(unsigned int cpu) +static unsigned int get_measured_perf(struct cpufreq_policy *policy, + unsigned int cpu) { union { struct { @@ -326,7 +327,7 @@ static unsigned int get_measured_perf(unsigned int cpu) #endif - retval = per_cpu(drv_data, cpu)->max_freq * perf_percent / 100; + retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100; put_cpu(); set_cpus_allowed_ptr(current, &saved_mask); @@ -451,7 +452,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, freqs.old = perf->states[perf->state].core_frequency * 1000; freqs.new = data->freq_table[next_state].frequency; - for_each_cpu_mask(i, cmd.mask) { + for_each_cpu_mask_nr(i, cmd.mask) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -466,7 +467,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, } } - for_each_cpu_mask(i, cmd.mask) { + for_each_cpu_mask_nr(i, cmd.mask) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -785,7 +786,11 @@ static int __init acpi_cpufreq_init(void) if (ret) return ret; - return cpufreq_register_driver(&acpi_cpufreq_driver); + ret = cpufreq_register_driver(&acpi_cpufreq_driver); + if (ret) + free_percpu(acpi_perf_data); + + return ret; } static void __exit acpi_cpufreq_exit(void) @@ -795,8 +800,6 @@ static void __exit acpi_cpufreq_exit(void) cpufreq_unregister_driver(&acpi_cpufreq_driver); free_percpu(acpi_perf_data); - - return; } module_param(acpi_pstate_strict, uint, 0644); diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index f03e9153618..965ea52767a 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -26,9 +26,10 @@ #define NFORCE2_SAFE_DISTANCE 50 /* Delay in ms between FSB changes */ -//#define NFORCE2_DELAY 10 +/* #define NFORCE2_DELAY 10 */ -/* nforce2_chipset: +/* + * nforce2_chipset: * FSB is changed using the chipset */ static struct pci_dev *nforce2_chipset_dev; @@ -36,13 +37,13 @@ static struct pci_dev *nforce2_chipset_dev; /* fid: * multiplier * 10 */ -static int fid = 0; +static int fid; /* min_fsb, max_fsb: * minimum and maximum FSB (= FSB at boot time) */ -static int min_fsb = 0; -static int max_fsb = 0; +static int min_fsb; +static int max_fsb; MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); @@ -53,7 +54,7 @@ module_param(min_fsb, int, 0444); MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); + "Minimum FSB to use, if not defined: current FSB - 50"); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) @@ -139,7 +140,7 @@ static unsigned int nforce2_fsb_read(int bootfsb) /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); + 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -147,13 +148,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if(bootfsb || !temp) + if (bootfsb || !temp) return fsb; - + /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -184,7 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -210,7 +211,8 @@ static int nforce2_set_fsb(unsigned int fsb) tfsb--; /* Calculate the PLL reg. value */ - if ((pll = nforce2_calc_pll(tfsb)) == -1) + pll = nforce2_calc_pll(tfsb); + if (pll == -1) return -EINVAL; nforce2_write_pll(pll); @@ -249,7 +251,7 @@ static unsigned int nforce2_get(unsigned int cpu) static int nforce2_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { -// unsigned long flags; +/* unsigned long flags; */ struct cpufreq_freqs freqs; unsigned int target_fsb; @@ -271,17 +273,17 @@ static int nforce2_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* Disable IRQs */ - //local_irq_save(flags); + /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", - target_fsb); + target_fsb); else dprintk("Changed FSB successfully to %d\n", - target_fsb); + target_fsb); /* Enable IRQs */ - //local_irq_restore(flags); + /* local_irq_restore(flags); */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -302,8 +304,8 @@ static int nforce2_verify(struct cpufreq_policy *policy) policy->max = (fsb_pol_max + 1) * fid * 100; cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); return 0; } @@ -347,7 +349,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - if(!max_fsb) + if (!max_fsb) return -EIO; if (!min_fsb) diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c index 94619c22f56..fe613c93b36 100644 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c @@ -25,8 +25,8 @@ #include <linux/cpufreq.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> +#include <linux/timex.h> +#include <linux/io.h> #define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ @@ -44,7 +44,7 @@ struct s_elan_multiplier { * It is important that the frequencies * are listed in ascending order here! */ -struct s_elan_multiplier elan_multiplier[] = { +static struct s_elan_multiplier elan_multiplier[] = { {1000, 0x02, 0x18}, {2000, 0x02, 0x10}, {4000, 0x02, 0x08}, @@ -82,7 +82,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) u8 clockspeed_reg; /* Clock Speed Register */ local_irq_disable(); - outb_p(0x80,REG_CSCIR); + outb_p(0x80, REG_CSCIR); clockspeed_reg = inb_p(REG_CSCDR); local_irq_enable(); @@ -98,10 +98,10 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) } /* 33 MHz is not 32 MHz... */ - if ((clockspeed_reg & 0xE0)==0xA0) + if ((clockspeed_reg & 0xE0) == 0xA0) return 33000; - return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); + return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; } @@ -117,7 +117,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) * There is no return value. */ -static void elanfreq_set_cpu_state (unsigned int state) +static void elanfreq_set_cpu_state(unsigned int state) { struct cpufreq_freqs freqs; @@ -144,20 +144,20 @@ static void elanfreq_set_cpu_state (unsigned int state) */ local_irq_disable(); - outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ - outb_p(0x00,REG_CSCDR); + outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x00, REG_CSCDR); local_irq_enable(); /* wait till internal pipelines and */ udelay(1000); /* buffers have cleaned up */ local_irq_disable(); /* now, set the CPU clock speed register (0x80) */ - outb_p(0x80,REG_CSCIR); - outb_p(elan_multiplier[state].val80h,REG_CSCDR); + outb_p(0x80, REG_CSCIR); + outb_p(elan_multiplier[state].val80h, REG_CSCDR); /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ - outb_p(0x40,REG_CSCIR); - outb_p(elan_multiplier[state].val40h,REG_CSCDR); + outb_p(0x40, REG_CSCIR); + outb_p(elan_multiplier[state].val40h, REG_CSCDR); udelay(10000); local_irq_enable(); @@ -173,12 +173,12 @@ static void elanfreq_set_cpu_state (unsigned int state) * for the hardware supported by the driver. */ -static int elanfreq_verify (struct cpufreq_policy *policy) +static int elanfreq_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); } -static int elanfreq_target (struct cpufreq_policy *policy, +static int elanfreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -205,7 +205,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) /* capability check */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) + (c->x86 != 4) || (c->x86_model != 10)) return -ENODEV; /* max freq */ @@ -213,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) max_freq = elanfreq_get_cpu_frequency(0); /* table init */ - for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { if (elanfreq_table[i].frequency > max_freq) elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; } @@ -224,7 +224,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); return 0; @@ -260,7 +260,7 @@ __setup("elanfreq=", elanfreq_setup); #endif -static struct freq_attr* elanfreq_attr[] = { +static struct freq_attr *elanfreq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -284,9 +284,9 @@ static int __init elanfreq_init(void) /* Test if we have the right hardware */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) { + (c->x86 != 4) || (c->x86_model != 10)) { printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); - return -ENODEV; + return -ENODEV; } return cpufreq_register_driver(&elanfreq_driver); } @@ -298,7 +298,7 @@ static void __exit elanfreq_exit(void) } -module_param (max_freq, int, 0444); +module_param(max_freq, int, 0444); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>"); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 199e4e05e5d..b8e05ee4f73 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -122,7 +122,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, return 0; /* notifiers */ - for_each_cpu_mask(i, policy->cpus) { + for_each_cpu_mask_nr(i, policy->cpus) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -130,11 +130,11 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software * Developer's Manual, Volume 3 */ - for_each_cpu_mask(i, policy->cpus) + for_each_cpu_mask_nr(i, policy->cpus) cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); /* notifiers */ - for_each_cpu_mask(i, policy->cpus) { + for_each_cpu_mask_nr(i, policy->cpus) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -171,7 +171,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) } if (c->x86 != 0xF) { - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n"); + printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>\n"); return 0; } diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index eb9b62b0830..b5ced806a31 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -15,12 +15,11 @@ #include <linux/slab.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> +#include <linux/timex.h> +#include <linux/io.h> - -#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long - as it is unused */ +#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long + as it is unused */ static unsigned int busfreq; /* FSB, in 10 kHz */ static unsigned int max_multiplier; @@ -53,7 +52,7 @@ static int powernow_k6_get_cpu_multiplier(void) msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue=inl(POWERNOW_IOPORT + 0x8); + invalue = inl(POWERNOW_IOPORT + 0x8); msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ @@ -67,9 +66,9 @@ static int powernow_k6_get_cpu_multiplier(void) * * Tries to change the PowerNow! multiplier */ -static void powernow_k6_set_state (unsigned int best_i) +static void powernow_k6_set_state(unsigned int best_i) { - unsigned long outvalue=0, invalue=0; + unsigned long outvalue = 0, invalue = 0; unsigned long msrval; struct cpufreq_freqs freqs; @@ -90,10 +89,10 @@ static void powernow_k6_set_state (unsigned int best_i) msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue=inl(POWERNOW_IOPORT + 0x8); + invalue = inl(POWERNOW_IOPORT + 0x8); invalue = invalue & 0xf; outvalue = outvalue | invalue; - outl(outvalue ,(POWERNOW_IOPORT + 0x8)); + outl(outvalue , (POWERNOW_IOPORT + 0x8)); msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ @@ -124,7 +123,7 @@ static int powernow_k6_verify(struct cpufreq_policy *policy) * * sets a new CPUFreq policy */ -static int powernow_k6_target (struct cpufreq_policy *policy, +static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -152,7 +151,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) busfreq = cpu_khz / max_multiplier; /* table init */ - for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { if (clock_ratio[i].index > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else @@ -165,7 +164,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); @@ -176,8 +175,8 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) { unsigned int i; - for (i=0; i<8; i++) { - if (i==max_multiplier) + for (i = 0; i < 8; i++) { + if (i == max_multiplier) powernow_k6_set_state(i); } cpufreq_frequency_table_put_attr(policy->cpu); @@ -189,7 +188,7 @@ static unsigned int powernow_k6_get(unsigned int cpu) return busfreq * powernow_k6_get_cpu_multiplier(); } -static struct freq_attr* powernow_k6_attr[] = { +static struct freq_attr *powernow_k6_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -227,7 +226,7 @@ static int __init powernow_k6_init(void) } if (cpufreq_register_driver(&powernow_k6_driver)) { - release_region (POWERNOW_IOPORT, 16); + release_region(POWERNOW_IOPORT, 16); return -EINVAL; } @@ -243,13 +242,13 @@ static int __init powernow_k6_init(void) static void __exit powernow_k6_exit(void) { cpufreq_unregister_driver(&powernow_k6_driver); - release_region (POWERNOW_IOPORT, 16); + release_region(POWERNOW_IOPORT, 16); } -MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); +MODULE_LICENSE("GPL"); module_init(powernow_k6_init); module_exit(powernow_k6_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h index f8a63b3664e..35fb4eaf6e1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h @@ -1,5 +1,4 @@ /* - * $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $ * (C) 2003 Dave Jones. * * Licensed under the terms of the GNU GPL License version 2. diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 206791eb46e..84bb395038d 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -66,7 +66,6 @@ static u32 find_freq_from_fid(u32 fid) return 800 + (fid * 100); } - /* Return a frequency in KHz, given an input fid */ static u32 find_khz_freq_from_fid(u32 fid) { @@ -78,7 +77,6 @@ static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 p return data[pstate].frequency; } - /* Return the vco fid for an input fid * * Each "low" fid has corresponding "high" fid, and you can get to "low" fids @@ -166,7 +164,6 @@ static void fidvid_msr_init(void) wrmsr(MSR_FIDVID_CTL, lo, hi); } - /* write the new fid value along with the other control fields to the msr */ static int write_new_fid(struct powernow_k8_data *data, u32 fid) { @@ -966,7 +963,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i freqs.old = find_khz_freq_from_fid(data->currfid); freqs.new = find_khz_freq_from_fid(fid); - for_each_cpu_mask(i, *(data->available_cores)) { + for_each_cpu_mask_nr(i, *(data->available_cores)) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -974,7 +971,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i res = transition_fid_vid(data, fid, vid); freqs.new = find_khz_freq_from_fid(data->currfid); - for_each_cpu_mask(i, *(data->available_cores)) { + for_each_cpu_mask_nr(i, *(data->available_cores)) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -997,7 +994,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - for_each_cpu_mask(i, *(data->available_cores)) { + for_each_cpu_mask_nr(i, *(data->available_cores)) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -1005,7 +1002,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i res = transition_pstate(data, pstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - for_each_cpu_mask(i, *(data->available_cores)) { + for_each_cpu_mask_nr(i, *(data->available_cores)) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index 908dd347c67..3b5f06423e7 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -26,9 +26,10 @@ #include <asm/cpufeature.h> #define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@lists.linux.org.uk" +#define MAINTAINER "cpufreq@vger.kernel.org" -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) +#define dprintk(msg...) \ + cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) #define INTEL_MSR_RANGE (0xffff) @@ -66,11 +67,12 @@ struct cpu_model struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ }; -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x); +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, + const struct cpu_id *x); /* Operating points for current CPU */ -static struct cpu_model *centrino_model[NR_CPUS]; -static const struct cpu_id *centrino_cpu[NR_CPUS]; +static DEFINE_PER_CPU(struct cpu_model *, centrino_model); +static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); static struct cpufreq_driver centrino_driver; @@ -255,7 +257,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) return -ENOENT; } - centrino_model[policy->cpu] = model; + per_cpu(centrino_model, policy->cpu) = model; dprintk("found \"%s\": max frequency: %dkHz\n", model->model_name, model->max_freq); @@ -264,10 +266,14 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) } #else -static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; } +static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) +{ + return -ENODEV; +} #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x) +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, + const struct cpu_id *x) { if ((c->x86 == x->x86) && (c->x86_model == x->x86_model) && @@ -286,23 +292,28 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) * for centrino, as some DSDTs are buggy. * Ideally, this can be done using the acpi_data structure. */ - if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) || - (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) || - (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) { + if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || + (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || + (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { msr = (msr >> 8) & 0xff; return msr * 100000; } - if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points)) + if ((!per_cpu(centrino_model, cpu)) || + (!per_cpu(centrino_model, cpu)->op_points)) return 0; msr &= 0xffff; - for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == centrino_model[cpu]->op_points[i].index) - return centrino_model[cpu]->op_points[i].frequency; + for (i = 0; + per_cpu(centrino_model, cpu)->op_points[i].frequency + != CPUFREQ_TABLE_END; + i++) { + if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) + return per_cpu(centrino_model, cpu)-> + op_points[i].frequency; } if (failsafe) - return centrino_model[cpu]->op_points[i-1].frequency; + return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; else return 0; } @@ -347,7 +358,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) int i; /* Only Intel makes Enhanced Speedstep-capable CPUs */ - if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) + if (cpu->x86_vendor != X86_VENDOR_INTEL || + !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) @@ -361,9 +373,9 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) break; if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; + per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; - if (!centrino_cpu[policy->cpu]) { + if (!per_cpu(centrino_cpu, policy->cpu)) { dprintk("found unsupported CPU with " "Enhanced SpeedStep: send /proc/cpuinfo to " MAINTAINER "\n"); @@ -386,23 +398,26 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) /* check to see if it stuck */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & (1<<16))) { - printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n"); + printk(KERN_INFO PFX + "couldn't enable Enhanced SpeedStep\n"); return -ENODEV; } } freq = get_cur_freq(policy->cpu); - - policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ + policy->cpuinfo.transition_latency = 10000; + /* 10uS transition latency */ policy->cur = freq; dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); - ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points); + ret = cpufreq_frequency_table_cpuinfo(policy, + per_cpu(centrino_model, policy->cpu)->op_points); if (ret) return (ret); - cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu); + cpufreq_frequency_table_get_attr( + per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu); return 0; } @@ -411,12 +426,12 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) { unsigned int cpu = policy->cpu; - if (!centrino_model[cpu]) + if (!per_cpu(centrino_model, cpu)) return -ENODEV; cpufreq_frequency_table_put_attr(cpu); - centrino_model[cpu] = NULL; + per_cpu(centrino_model, cpu) = NULL; return 0; } @@ -430,17 +445,26 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) */ static int centrino_verify (struct cpufreq_policy *policy) { - return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points); + return cpufreq_frequency_table_verify(policy, + per_cpu(centrino_model, policy->cpu)->op_points); } /** * centrino_setpolicy - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ +struct allmasks { + cpumask_t online_policy_cpus; + cpumask_t saved_mask; + cpumask_t set_mask; + cpumask_t covered_cpus; +}; + static int centrino_target (struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -448,48 +472,55 @@ static int centrino_target (struct cpufreq_policy *policy, unsigned int newstate = 0; unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; struct cpufreq_freqs freqs; - cpumask_t online_policy_cpus; - cpumask_t saved_mask; - cpumask_t set_mask; - cpumask_t covered_cpus; int retval = 0; unsigned int j, k, first_cpu, tmp; - - if (unlikely(centrino_model[cpu] == NULL)) - return -ENODEV; + CPUMASK_ALLOC(allmasks); + CPUMASK_PTR(online_policy_cpus, allmasks); + CPUMASK_PTR(saved_mask, allmasks); + CPUMASK_PTR(set_mask, allmasks); + CPUMASK_PTR(covered_cpus, allmasks); + + if (unlikely(allmasks == NULL)) + return -ENOMEM; + + if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { + retval = -ENODEV; + goto out; + } if (unlikely(cpufreq_frequency_table_target(policy, - centrino_model[cpu]->op_points, + per_cpu(centrino_model, cpu)->op_points, target_freq, relation, &newstate))) { - return -EINVAL; + retval = -EINVAL; + goto out; } #ifdef CONFIG_HOTPLUG_CPU /* cpufreq holds the hotplug lock, so we are safe from here on */ - cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); + cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus); #else - online_policy_cpus = policy->cpus; + *online_policy_cpus = policy->cpus; #endif - saved_mask = current->cpus_allowed; + *saved_mask = current->cpus_allowed; first_cpu = 1; - cpus_clear(covered_cpus); - for_each_cpu_mask(j, online_policy_cpus) { + cpus_clear(*covered_cpus); + for_each_cpu_mask_nr(j, *online_policy_cpus) { /* * Support for SMP systems. * Make sure we are running on CPU that wants to change freq */ - cpus_clear(set_mask); + cpus_clear(*set_mask); if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - cpus_or(set_mask, set_mask, online_policy_cpus); + cpus_or(*set_mask, *set_mask, *online_policy_cpus); else - cpu_set(j, set_mask); + cpu_set(j, *set_mask); - set_cpus_allowed_ptr(current, &set_mask); + set_cpus_allowed_ptr(current, set_mask); preempt_disable(); - if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) { + if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) { dprintk("couldn't limit to CPUs in this domain\n"); retval = -EAGAIN; if (first_cpu) { @@ -500,7 +531,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - msr = centrino_model[cpu]->op_points[newstate].index; + msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; if (first_cpu) { rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); @@ -517,7 +548,7 @@ static int centrino_target (struct cpufreq_policy *policy, dprintk("target=%dkHz old=%d new=%d msr=%04x\n", target_freq, freqs.old, freqs.new, msr); - for_each_cpu_mask(k, online_policy_cpus) { + for_each_cpu_mask_nr(k, *online_policy_cpus) { freqs.cpu = k; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); @@ -536,11 +567,11 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - cpu_set(j, covered_cpus); + cpu_set(j, *covered_cpus); preempt_enable(); } - for_each_cpu_mask(k, online_policy_cpus) { + for_each_cpu_mask_nr(k, *online_policy_cpus) { freqs.cpu = k; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -553,30 +584,32 @@ static int centrino_target (struct cpufreq_policy *policy, * Best effort undo.. */ - if (!cpus_empty(covered_cpus)) { - for_each_cpu_mask(j, covered_cpus) { + if (!cpus_empty(*covered_cpus)) + for_each_cpu_mask_nr(j, *covered_cpus) { set_cpus_allowed_ptr(current, &cpumask_of_cpu(j)); wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); } - } tmp = freqs.new; freqs.new = freqs.old; freqs.old = tmp; - for_each_cpu_mask(j, online_policy_cpus) { + for_each_cpu_mask_nr(j, *online_policy_cpus) { freqs.cpu = j; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } } - set_cpus_allowed_ptr(current, &saved_mask); - return 0; + set_cpus_allowed_ptr(current, saved_mask); + retval = 0; + goto out; migrate_end: preempt_enable(); - set_cpus_allowed_ptr(current, &saved_mask); - return 0; + set_cpus_allowed_ptr(current, saved_mask); +out: + CPUMASK_FREE(allmasks); + return retval; } static struct freq_attr* centrino_attr[] = { diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index 1b50244b1fd..191f7263c61 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -279,7 +279,7 @@ static int speedstep_target (struct cpufreq_policy *policy, cpus_allowed = current->cpus_allowed; - for_each_cpu_mask(i, policy->cpus) { + for_each_cpu_mask_nr(i, policy->cpus) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } @@ -292,7 +292,7 @@ static int speedstep_target (struct cpufreq_policy *policy, /* allow to be run on all CPUs */ set_cpus_allowed_ptr(current, &cpus_allowed); - for_each_cpu_mask(i, policy->cpus) { + for_each_cpu_mask_nr(i, policy->cpus) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 3fd7a67bb06..ffd0f5ed071 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -15,13 +15,11 @@ /* * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU */ -static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) { unsigned char ccr2, ccr3; - unsigned long flags; /* we test for DEVID by checking whether CCR3 is writable */ - local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, ccr3 ^ 0x80); getCx86(0xc0); /* dummy to change bus */ @@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) *dir0 = getCx86(CX86_DIR0); *dir1 = getCx86(CX86_DIR1); } - local_irq_restore(flags); } +static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +{ + unsigned long flags; + + local_irq_save(flags); + __do_cyrix_devid(dir0, dir1); + local_irq_restore(flags); +} /* * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in * order to identify the Cyrix CPU model after we're out of setup.c @@ -116,7 +121,7 @@ static void __cpuinit set_cx86_reorder(void) setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* Load/Store Serialize to mem access disable (=reorder it) */ - setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); + setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80); /* set load/store serialize from 1GB to 4GB */ ccr3 |= 0xe0; setCx86(CX86_CCR3, ccr3); @@ -127,28 +132,11 @@ static void __cpuinit set_cx86_memwb(void) printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n"); /* CCR2 bit 2: unlock NW bit */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04); + setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04); /* set 'Not Write-through' */ write_cr0(read_cr0() | X86_CR0_NW); /* CCR2 bit 2: lock NW bit and set WT1 */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14); -} - -static void __cpuinit set_cx86_inc(void) -{ - unsigned char ccr3; - - printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n"); - - ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - /* PCR1 -- Performance Control */ - /* Incrementor on, whatever that is */ - setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02); - /* PCR0 -- Performance Control */ - /* Incrementor Margin 10 */ - setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04); - setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14); } /* @@ -162,23 +150,40 @@ static void __cpuinit geode_configure(void) local_irq_save(flags); /* Suspend on halt power saving and enable #SUSP pin */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); + setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* FPU fast, DTE cache, Mem bypass */ - setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); + setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38); setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ set_cx86_memwb(); set_cx86_reorder(); - set_cx86_inc(); local_irq_restore(flags); } +static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c) +{ + unsigned char dir0, dir0_msn, dir1 = 0; + + __do_cyrix_devid(&dir0, &dir1); + dir0_msn = dir0 >> 4; /* identifies CPU "family" */ + + switch (dir0_msn) { + case 3: /* 6x86/6x86L */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + case 5: /* 6x86MX/M II */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + } +} static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { @@ -286,7 +291,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); + setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1); /* * GXm : 0x30 ... 0x5f GXm datasheet 51 @@ -296,7 +301,6 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) */ if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f)) geode_configure(); - get_model_name(c); /* get CPU marketing name */ return; } else { /* MediaGX */ Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4'; @@ -309,7 +313,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) if (dir1 > 7) { dir0_msn++; /* M II */ /* Enable MMX extensions (App note 108) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); + setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1); } else { c->coma_bug = 1; /* 6x86MX, it has the bug. */ } @@ -424,7 +428,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */ + setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); /* enable cpuid */ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ local_irq_restore(flags); } @@ -434,16 +438,19 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_vendor = "Cyrix", .c_ident = { "CyrixInstead" }, + .c_early_init = early_init_cyrix, .c_init = init_cyrix, .c_identify = cyrix_identify, + .c_x86_vendor = X86_VENDOR_CYRIX, }; -cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev); +cpu_dev_register(cyrix_cpu_dev); static struct cpu_dev nsc_cpu_dev __cpuinitdata = { .c_vendor = "NSC", .c_ident = { "Geode by NSC" }, .c_init = init_nsc, + .c_x86_vendor = X86_VENDOR_NSC, }; -cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev); +cpu_dev_register(nsc_cpu_dev); diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c deleted file mode 100644 index e43ad4ad4cb..00000000000 --- a/arch/x86/kernel/cpu/feature_names.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Strings for the various x86 capability flags. - * - * This file must not contain any executable code. - */ - -#include <asm/cpufeature.h> - -/* - * These flag bits must match the definitions in <asm/cpufeature.h>. - * NULL means this bit is undefined or reserved; either way it doesn't - * have meaning as far as Linux is concerned. Note that it's important - * to realize there is a difference between this table and CPUID -- if - * applications want to get the raw CPUID data, they should access - * /dev/cpu/<cpu_nr>/cpuid instead. - */ -const char * const x86_cap_flags[NCAPINTS*32] = { - /* Intel-defined */ - "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", - "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", - "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx", - "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe", - - /* AMD-defined */ - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", - "3dnowext", "3dnow", - - /* Transmeta-defined */ - "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Other (Linux-defined) */ - "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", - NULL, NULL, NULL, NULL, - "constant_tsc", "up", NULL, "arch_perfmon", - "pebs", "bts", NULL, NULL, - "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", - "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt", - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* VIA/Cyrix/Centaur-defined */ - NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", - "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", "extapic", - "cr8_legacy", "abm", "sse4a", "misalignsse", - "3dnowprefetch", "osvw", "ibs", "sse5", - "skinit", "wdt", NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Auxiliary (Linux-defined) */ - "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, -}; - -const char *const x86_power_flags[32] = { - "ts", /* temperature sensor */ - "fid", /* frequency id control */ - "vid", /* voltage id control */ - "ttp", /* thermal trip */ - "tm", - "stc", - "100mhzsteps", - "hwpstate", - "", /* tsc invariant mapped to constant_tsc */ - /* nothing */ -}; diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index fe9224c51d3..99468dbd08d 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -15,6 +15,11 @@ #include <asm/ds.h> #include <asm/bugs.h> +#ifdef CONFIG_X86_64 +#include <asm/topology.h> +#include <asm/numa_64.h> +#endif + #include "cpu.h" #ifdef CONFIG_X86_LOCAL_APIC @@ -23,23 +28,22 @@ #include <mach_apic.h> #endif -#ifdef CONFIG_X86_INTEL_USERCOPY -/* - * Alignment at which movsl is preferred for bulk memory copies. - */ -struct movsl_mask movsl_mask __read_mostly; -#endif - static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { - /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ - if (c->x86 == 15 && c->x86_cache_alignment == 64) - c->x86_cache_alignment = 128; if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + +#ifdef CONFIG_X86_64 + set_cpu_cap(c, X86_FEATURE_SYSENTER32); +#else + /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ + if (c->x86 == 15 && c->x86_cache_alignment == 64) + c->x86_cache_alignment = 128; +#endif } +#ifdef CONFIG_X86_32 /* * Early probe support logic for ppro memory erratum #50 * @@ -59,15 +63,54 @@ int __cpuinit ppro_with_ram_bug(void) return 0; } +#ifdef CONFIG_X86_F00F_BUG +static void __cpuinit trap_init_f00f_bug(void) +{ + __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); -/* - * P4 Xeon errata 037 workaround. - * Hardware prefetcher may cause stale data to be loaded into the cache. - */ -static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) + /* + * Update the IDT descriptor and reload the IDT so that + * it uses the read-only mapped virtual address. + */ + idt_descr.address = fix_to_virt(FIX_F00F_IDT); + load_idt(&idt_descr); +} +#endif + +static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) { unsigned long lo, hi; +#ifdef CONFIG_X86_F00F_BUG + /* + * All current models of Pentium and Pentium with MMX technology CPUs + * have the F0 0F bug, which lets nonprivileged users lock up the system. + * Note that the workaround only should be initialized once... + */ + c->f00f_bug = 0; + if (!paravirt_enabled() && c->x86 == 5) { + static int f00f_workaround_enabled; + + c->f00f_bug = 1; + if (!f00f_workaround_enabled) { + trap_init_f00f_bug(); + printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); + f00f_workaround_enabled = 1; + } + } +#endif + + /* + * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until + * model 3 mask 3 + */ + if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) + clear_cpu_cap(c, X86_FEATURE_SEP); + + /* + * P4 Xeon errata 037 workaround. + * Hardware prefetcher may cause stale data to be loaded into the cache. + */ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { rdmsr(MSR_IA32_MISC_ENABLE, lo, hi); if ((lo & (1<<9)) == 0) { @@ -77,13 +120,68 @@ static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); } } + + /* + * See if we have a good local APIC by checking for buggy Pentia, + * i.e. all B steppings and the C2 stepping of P54C when using their + * integrated APIC (see 11AP erratum in "Pentium Processor + * Specification Update"). + */ + if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 && + (c->x86_mask < 0x6 || c->x86_mask == 0xb)) + set_cpu_cap(c, X86_FEATURE_11AP); + + +#ifdef CONFIG_X86_INTEL_USERCOPY + /* + * Set up the preferred alignment for movsl bulk memory moves + */ + switch (c->x86) { + case 4: /* 486: untested */ + break; + case 5: /* Old Pentia: untested */ + break; + case 6: /* PII/PIII only like movsl with 8-byte alignment */ + movsl_mask.mask = 7; + break; + case 15: /* P4 is OK down to 8-byte alignment */ + movsl_mask.mask = 7; + break; + } +#endif + +#ifdef CONFIG_X86_NUMAQ + numaq_tsc_disable(); +#endif +} +#else +static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) +{ } +#endif +static void __cpuinit srat_detect_node(void) +{ +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} /* * find out the number of processor cores on the die */ -static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax, ebx, ecx, edx; @@ -98,45 +196,51 @@ static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -#ifdef CONFIG_X86_F00F_BUG -static void __cpuinit trap_init_f00f_bug(void) +static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c) { - __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); - - /* - * Update the IDT descriptor and reload the IDT so that - * it uses the read-only mapped virtual address. - */ - idt_descr.address = fix_to_virt(FIX_F00F_IDT); - load_idt(&idt_descr); + /* Intel VMX MSR indicated features */ +#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000 +#define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000 +#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000 +#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001 +#define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002 +#define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020 + + u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2; + + clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW); + clear_cpu_cap(c, X86_FEATURE_VNMI); + clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); + clear_cpu_cap(c, X86_FEATURE_EPT); + clear_cpu_cap(c, X86_FEATURE_VPID); + + rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high); + msr_ctl = vmx_msr_high | vmx_msr_low; + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW) + set_cpu_cap(c, X86_FEATURE_TPR_SHADOW); + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI) + set_cpu_cap(c, X86_FEATURE_VNMI); + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) { + rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2, + vmx_msr_low, vmx_msr_high); + msr_ctl2 = vmx_msr_high | vmx_msr_low; + if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) && + (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)) + set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); + if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT) + set_cpu_cap(c, X86_FEATURE_EPT); + if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID) + set_cpu_cap(c, X86_FEATURE_VPID); + } } -#endif static void __cpuinit init_intel(struct cpuinfo_x86 *c) { unsigned int l2 = 0; - char *p = NULL; early_init_intel(c); -#ifdef CONFIG_X86_F00F_BUG - /* - * All current models of Pentium and Pentium with MMX technology CPUs - * have the F0 0F bug, which lets nonprivileged users lock up the system. - * Note that the workaround only should be initialized once... - */ - c->f00f_bug = 0; - if (!paravirt_enabled() && c->x86 == 5) { - static int f00f_workaround_enabled; - - c->f00f_bug = 1; - if (!f00f_workaround_enabled) { - trap_init_f00f_bug(); - printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); - f00f_workaround_enabled = 1; - } - } -#endif + intel_workarounds(c); l2 = init_intel_cacheinfo(c); if (c->cpuid_level > 9) { @@ -146,16 +250,32 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); } - /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ - if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) - clear_cpu_cap(c, X86_FEATURE_SEP); + if (cpu_has_xmm2) + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + if (cpu_has_ds) { + unsigned int l1; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + ds_init_intel(c); + } +#ifdef CONFIG_X86_64 + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); +#else /* * Names for the Pentium II/Celeron processors * detectable only by also checking the cache size. * Dixon is NOT a Celeron. */ if (c->x86 == 6) { + char *p = NULL; + switch (c->x86_model) { case 5: if (c->x86_mask == 0) { @@ -178,56 +298,41 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) p = "Celeron (Coppermine)"; break; } - } - if (p) - strcpy(c->x86_model_id, p); - - c->x86_max_cores = num_cpu_cores(c); - - detect_ht(c); - - /* Work around errata */ - Intel_errata_workarounds(c); - -#ifdef CONFIG_X86_INTEL_USERCOPY - /* - * Set up the preferred alignment for movsl bulk memory moves - */ - switch (c->x86) { - case 4: /* 486: untested */ - break; - case 5: /* Old Pentia: untested */ - break; - case 6: /* PII/PIII only like movsl with 8-byte alignment */ - movsl_mask.mask = 7; - break; - case 15: /* P4 is OK down to 8-byte alignment */ - movsl_mask.mask = 7; - break; + if (p) + strcpy(c->x86_model_id, p); } -#endif - if (cpu_has_xmm2) - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - if (c->x86 == 15) { + if (c->x86 == 15) set_cpu_cap(c, X86_FEATURE_P4); - } if (c->x86 == 6) set_cpu_cap(c, X86_FEATURE_P3); - if (cpu_has_ds) { - unsigned int l1; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } if (cpu_has_bts) - ds_init_intel(c); + ptrace_bts_init_intel(c); + +#endif + + detect_extended_topology(c); + if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) { + /* + * let's use the legacy cpuid vector 0x1 and 0x4 for topology + * detection. + */ + c->x86_max_cores = intel_num_cpu_cores(c); +#ifdef CONFIG_X86_32 + detect_ht(c); +#endif + } + + /* Work around errata */ + srat_detect_node(); + + if (cpu_has(c, X86_FEATURE_VMX)) + detect_vmx_virtcap(c); } +#ifdef CONFIG_X86_32 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* @@ -240,10 +345,12 @@ static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned i size = 256; return size; } +#endif static struct cpu_dev intel_cpu_dev __cpuinitdata = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, +#ifdef CONFIG_X86_32 .c_models = { { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = { @@ -293,76 +400,12 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = { } }, }, + .c_size_cache = intel_size_cache, +#endif .c_early_init = early_init_intel, .c_init = init_intel, - .c_size_cache = intel_size_cache, + .c_x86_vendor = X86_VENDOR_INTEL, }; -cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); - -#ifndef CONFIG_X86_CMPXCHG -unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) -{ - u8 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u8 *)ptr; - if (prev == old) - *(u8 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u8); - -unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) -{ - u16 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u16 *)ptr; - if (prev == old) - *(u16 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u16); - -unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) -{ - u32 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u32 *)ptr; - if (prev == old) - *(u32 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u32); -#endif - -#ifndef CONFIG_X86_CMPXCHG64 -unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new) -{ - u64 prev; - unsigned long flags; - - /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u64 *)ptr; - if (prev == old) - *(u64 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_486_u64); -#endif - -/* arch_initcall(intel_cpu_init); */ +cpu_dev_register(intel_cpu_dev); diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615dcb14..3f46afbb1cf 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -1,8 +1,8 @@ /* - * Routines to indentify caches on Intel CPU. + * Routines to indentify caches on Intel CPU. * - * Changes: - * Venkatesh Pallipadi : Adding cache identification through cpuid(4) + * Changes: + * Venkatesh Pallipadi : Adding cache identification through cpuid(4) * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure. * Andi Kleen / Andreas Herrmann : CPUID4 emulation on AMD. */ @@ -13,6 +13,7 @@ #include <linux/compiler.h> #include <linux/cpu.h> #include <linux/sched.h> +#include <linux/pci.h> #include <asm/processor.h> #include <asm/smp.h> @@ -62,6 +63,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ @@ -129,9 +131,18 @@ struct _cpuid4_info { union _cpuid4_leaf_ebx ebx; union _cpuid4_leaf_ecx ecx; unsigned long size; + unsigned long can_disable; cpumask_t shared_cpu_map; /* future?: only cpus/node is needed */ }; +#ifdef CONFIG_PCI +static struct pci_device_id k8_nb_id[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) }, + {} +}; +#endif + unsigned short num_cache_leaves; /* AMD doesn't have CPUID4. Emulate it here to report the same @@ -181,9 +192,10 @@ static unsigned short assocs[] __cpuinitdata = { static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 }; static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 }; -static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, - union _cpuid4_leaf_ebx *ebx, - union _cpuid4_leaf_ecx *ecx) +static void __cpuinit +amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, + union _cpuid4_leaf_ebx *ebx, + union _cpuid4_leaf_ecx *ecx) { unsigned dummy; unsigned line_size, lines_per_tag, assoc, size_in_kb; @@ -250,27 +262,40 @@ static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, (ebx->split.ways_of_associativity + 1) - 1; } -static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) +static void __cpuinit +amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf) +{ + if (index < 3) + return; + this_leaf->can_disable = 1; +} + +static int +__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { union _cpuid4_leaf_eax eax; union _cpuid4_leaf_ebx ebx; union _cpuid4_leaf_ecx ecx; unsigned edx; - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { amd_cpuid4(index, &eax, &ebx, &ecx); - else - cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); + if (boot_cpu_data.x86 >= 0x10) + amd_check_l3_disable(index, this_leaf); + } else { + cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); + } + if (eax.split.type == CACHE_TYPE_NULL) return -EIO; /* better error ? */ this_leaf->eax = eax; this_leaf->ebx = ebx; this_leaf->ecx = ecx; - this_leaf->size = (ecx.split.number_of_sets + 1) * - (ebx.split.coherency_line_size + 1) * - (ebx.split.physical_line_partition + 1) * - (ebx.split.ways_of_associativity + 1); + this_leaf->size = (ecx.split.number_of_sets + 1) * + (ebx.split.coherency_line_size + 1) * + (ebx.split.physical_line_partition + 1) * + (ebx.split.ways_of_associativity + 1); return 0; } @@ -452,7 +477,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) /* pointer to _cpuid4_info array (for each cache leaf) */ static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info); -#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y])) +#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y])) #ifdef CONFIG_SMP static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) @@ -488,8 +513,8 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) int sibling; this_leaf = CPUID4_INFO_IDX(cpu, index); - for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) { - sibling_leaf = CPUID4_INFO_IDX(sibling, index); + for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) { + sibling_leaf = CPUID4_INFO_IDX(sibling, index); cpu_clear(cpu, sibling_leaf->shared_cpu_map); } } @@ -571,7 +596,7 @@ struct _index_kobject { /* pointer to array of kobjects for cpuX/cache/indexY */ static DEFINE_PER_CPU(struct _index_kobject *, index_kobject); -#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y])) +#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y])) #define show_one_plus(file_name, object, val) \ static ssize_t show_##file_name \ @@ -636,6 +661,99 @@ static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) { } } +#define to_object(k) container_of(k, struct _index_kobject, kobj) +#define to_attr(a) container_of(a, struct _cache_attr, attr) + +#ifdef CONFIG_PCI +static struct pci_dev *get_k8_northbridge(int node) +{ + struct pci_dev *dev = NULL; + int i; + + for (i = 0; i <= node; i++) { + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (!dev) + break; + } while (!pci_match_id(&k8_nb_id[0], dev)); + if (!dev) + break; + } + return dev; +} +#else +static struct pci_dev *get_k8_northbridge(int node) +{ + return NULL; +} +#endif + +static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf) +{ + int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map)); + struct pci_dev *dev = NULL; + ssize_t ret = 0; + int i; + + if (!this_leaf->can_disable) + return sprintf(buf, "Feature not enabled\n"); + + dev = get_k8_northbridge(node); + if (!dev) { + printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n"); + return -EINVAL; + } + + for (i = 0; i < 2; i++) { + unsigned int reg; + + pci_read_config_dword(dev, 0x1BC + i * 4, ®); + + ret += sprintf(buf, "%sEntry: %d\n", buf, i); + ret += sprintf(buf, "%sReads: %s\tNew Entries: %s\n", + buf, + reg & 0x80000000 ? "Disabled" : "Allowed", + reg & 0x40000000 ? "Disabled" : "Allowed"); + ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n", + buf, (reg & 0x30000) >> 16, reg & 0xfff); + } + return ret; +} + +static ssize_t +store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf, + size_t count) +{ + int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map)); + struct pci_dev *dev = NULL; + unsigned int ret, index, val; + + if (!this_leaf->can_disable) + return 0; + + if (strlen(buf) > 15) + return -EINVAL; + + ret = sscanf(buf, "%x %x", &index, &val); + if (ret != 2) + return -EINVAL; + if (index > 1) + return -EINVAL; + + val |= 0xc0000000; + dev = get_k8_northbridge(node); + if (!dev) { + printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n"); + return -EINVAL; + } + + pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000); + wbinvd(); + pci_write_config_dword(dev, 0x1BC + index * 4, val); + + return 1; +} + struct _cache_attr { struct attribute attr; ssize_t (*show)(struct _cpuid4_info *, char *); @@ -656,6 +774,8 @@ define_one_ro(size); define_one_ro(shared_cpu_map); define_one_ro(shared_cpu_list); +static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable); + static struct attribute * default_attrs[] = { &type.attr, &level.attr, @@ -666,12 +786,10 @@ static struct attribute * default_attrs[] = { &size.attr, &shared_cpu_map.attr, &shared_cpu_list.attr, + &cache_disable.attr, NULL }; -#define to_object(k) container_of(k, struct _index_kobject, kobj) -#define to_attr(a) container_of(a, struct _cache_attr, attr) - static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf) { struct _cache_attr *fattr = to_attr(attr); @@ -681,14 +799,22 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf) ret = fattr->show ? fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), buf) : - 0; + 0; return ret; } static ssize_t store(struct kobject * kobj, struct attribute * attr, const char * buf, size_t count) { - return 0; + struct _cache_attr *fattr = to_attr(attr); + struct _index_kobject *this_leaf = to_object(kobj); + ssize_t ret; + + ret = fattr->store ? + fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), + buf, count) : + 0; + return ret; } static struct sysfs_ops sysfs_ops = { @@ -779,15 +905,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) } kobject_put(per_cpu(cache_kobject, cpu)); cpuid4_cache_sysfs_exit(cpu); - break; + return retval; } kobject_uevent(&(this_object->kobj), KOBJ_ADD); } - if (!retval) - cpu_set(cpu, cache_dev_map); + cpu_set(cpu, cache_dev_map); kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD); - return retval; + return 0; } static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c index e633c9c2b76..f390c9f6635 100644 --- a/arch/x86/kernel/cpu/mcheck/k7.c +++ b/arch/x86/kernel/cpu/mcheck/k7.c @@ -9,23 +9,23 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include "mce.h" /* Machine Check Handler For AMD Athlon/Duron */ -static void k7_machine_check(struct pt_regs * regs, long error_code) +static void k7_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -60,12 +60,12 @@ static void k7_machine_check(struct pt_regs * regs, long error_code) } if (recover&2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover&1) - panic ("Unable to continue"); - printk (KERN_EMERG "Attempting to continue.\n"); + panic("Unable to continue"); + printk(KERN_EMERG "Attempting to continue.\n"); mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -81,25 +81,25 @@ void amd_mcheck_init(struct cpuinfo_x86 *c) machine_check_vector = k7_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; /* Clear status for MC index 0 separately, we don't touch CTL, * as some K7 Athlons cause spurious MCEs when its enabled. */ if (boot_cpu_data.x86 == 6) { - wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0); + wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0); i = 1; } else i = 0; - for (; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); } diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c068ae..4b031a4ac85 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -9,6 +9,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/smp_lock.h> #include <linux/string.h> #include <linux/rcupdate.h> #include <linux/kallsyms.h> @@ -31,7 +32,7 @@ #include <asm/idle.h> #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +47,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +210,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -363,7 +364,7 @@ static void mcheck_check_cpu(void *info) static void mcheck_timer(struct work_struct *work) { - on_each_cpu(mcheck_check_cpu, NULL, 1, 1); + on_each_cpu(mcheck_check_cpu, NULL, 1); /* * Alert userspace if needed. If we logged an MCE, reduce the @@ -444,9 +445,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + banks = MCE_EXTENDED_BANK; + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +464,11 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + if (i < NR_SYSFS_BANKS) + wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + else + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); + wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -527,10 +533,12 @@ static int open_exclu; /* already open exclusive? */ static int mce_open(struct inode *inode, struct file *file) { + lock_kernel(); spin_lock(&mce_state_lock); if (open_exclu || (open_count && (file->f_flags & O_EXCL))) { spin_unlock(&mce_state_lock); + unlock_kernel(); return -EBUSY; } @@ -539,6 +547,7 @@ static int mce_open(struct inode *inode, struct file *file) open_count++; spin_unlock(&mce_state_lock); + unlock_kernel(); return nonseekable_open(inode, file); } @@ -571,7 +580,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, char __user *buf = ubuf; int i, err; - cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL); + cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL); if (!cpu_tsc) return -ENOMEM; @@ -612,7 +621,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, * Collect entries that were still getting written before the * synchronize. */ - on_each_cpu(collect_tscs, cpu_tsc, 1, 1); + on_each_cpu(collect_tscs, cpu_tsc, 1); for (i = next; i < MCE_LOG_LEN; i++) { if (mcelog.entry[i].finished && mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) { @@ -737,7 +746,7 @@ static void mce_restart(void) if (next_interval) cancel_delayed_work(&mcheck_work); /* Timer race is harmless here */ - on_each_cpu(mce_init, NULL, 1, 1); + on_each_cpu(mce_init, NULL, 1); next_interval = check_interval * HZ; if (next_interval) schedule_delayed_work(&mcheck_work, @@ -750,13 +759,18 @@ static struct sysdev_class mce_sysclass = { }; DEFINE_PER_CPU(struct sys_device, device_mce); +void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata; /* Why are there no generic functions for this? */ #define ACCESSOR(name, var, start) \ - static ssize_t show_ ## name(struct sys_device *s, char *buf) { \ + static ssize_t show_ ## name(struct sys_device *s, \ + struct sysdev_attribute *attr, \ + char *buf) { \ return sprintf(buf, "%lx\n", (unsigned long)var); \ } \ - static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \ + static ssize_t set_ ## name(struct sys_device *s, \ + struct sysdev_attribute *attr, \ + const char *buf, size_t siz) { \ char *end; \ unsigned long new = simple_strtoul(buf, &end, 0); \ if (end == buf) return -EINVAL; \ @@ -766,7 +780,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) @@ -774,14 +791,16 @@ ACCESSOR(bank3ctl,bank[3],mce_restart()) ACCESSOR(bank4ctl,bank[4],mce_restart()) ACCESSOR(bank5ctl,bank[5],mce_restart()) -static ssize_t show_trigger(struct sys_device *s, char *buf) +static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr, + char *buf) { strcpy(buf, trigger); strcat(buf, "\n"); return strlen(trigger) + 1; } -static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) +static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, + const char *buf,size_t siz) { char *p; int len; @@ -794,12 +813,12 @@ static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) } static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); -ACCESSOR(tolerant,tolerant,) +static SYSDEV_INT_ATTR(tolerant, 0644, tolerant); ACCESSOR(check_interval,check_interval,mce_restart()) static struct sysdev_attribute *mce_attributes[] = { &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl, - &attr_tolerant, &attr_check_interval, &attr_trigger, + &attr_tolerant.attr, &attr_check_interval, &attr_trigger, NULL }; @@ -841,7 +860,7 @@ error: return err; } -static void mce_remove_device(unsigned int cpu) +static __cpuinit void mce_remove_device(unsigned int cpu) { int i; @@ -865,9 +884,13 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, case CPU_ONLINE: case CPU_ONLINE_FROZEN: mce_create_device(cpu); + if (threshold_cpu_callback) + threshold_cpu_callback(action, cpu); break; case CPU_DEAD: case CPU_DEAD_FROZEN: + if (threshold_cpu_callback) + threshold_cpu_callback(action, cpu); mce_remove_device(cpu); break; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c index 7c9a813e119..5eb390a4b2e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c @@ -527,7 +527,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) if (err) goto out_free; - for_each_cpu_mask(i, b->cpus) { + for_each_cpu_mask_nr(i, b->cpus) { if (i == cpu) continue; @@ -617,7 +617,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) #endif /* remove all sibling symlinks before unregistering */ - for_each_cpu_mask(i, b->cpus) { + for_each_cpu_mask_nr(i, b->cpus) { if (i == cpu) continue; @@ -628,6 +628,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) deallocate_threshold_block(cpu, bank); free_out: + kobject_del(b->kobj); kobject_put(b->kobj); kfree(b); per_cpu(threshold_banks, cpu)[bank] = NULL; @@ -645,14 +646,11 @@ static void threshold_remove_device(unsigned int cpu) } /* get notified when a cpu comes on/off */ -static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action, + unsigned int cpu) { - /* cpu was unsigned int to begin with */ - unsigned int cpu = (unsigned long)hcpu; - if (cpu >= NR_CPUS) - goto out; + return; switch (action) { case CPU_ONLINE: @@ -666,14 +664,8 @@ static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb, default: break; } - out: - return NOTIFY_OK; } -static struct notifier_block threshold_cpu_notifier __cpuinitdata = { - .notifier_call = threshold_cpu_callback, -}; - static __init int threshold_init_device(void) { unsigned lcpu = 0; @@ -684,7 +676,7 @@ static __init int threshold_init_device(void) if (err) return err; } - register_hotcpu_notifier(&threshold_cpu_notifier); + threshold_cpu_callback = amd_64_threshold_cpu_callback; return 0; } diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c index 00ccb6c14ec..cc1fccdd31e 100644 --- a/arch/x86/kernel/cpu/mcheck/non-fatal.c +++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c @@ -59,7 +59,7 @@ static DECLARE_DELAYED_WORK(mce_work, mce_work_fn); static void mce_work_fn(struct work_struct *work) { - on_each_cpu(mce_checkregs, NULL, 1, 1); + on_each_cpu(mce_checkregs, NULL, 1); schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE)); } diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index cb03345554a..9b60fce09f7 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -8,7 +8,7 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include <asm/apic.h> @@ -32,12 +32,12 @@ struct intel_mce_extended_msrs { /* u32 *reserved[]; */ }; -static int mce_num_extended_msrs = 0; +static int mce_num_extended_msrs; #ifdef CONFIG_X86_MCE_P4THERMAL static void unexpected_thermal_interrupt(struct pt_regs *regs) -{ +{ printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", smp_processor_id()); add_taint(TAINT_MACHINE_CHECK); @@ -83,7 +83,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) * be some SMM goo which handles it, so we can't even put a handler * since it might be delivered via SMI already -zwanem. */ - rdmsr (MSR_IA32_MISC_ENABLE, l, h); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); h = apic_read(APIC_LVTTHMR); if ((l & (1<<3)) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", @@ -91,7 +91,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) return; /* -EBUSY */ } - /* check whether a vector already exists, temporarily masked? */ + /* check whether a vector already exists, temporarily masked? */ if (h & APIC_VECTOR_MASK) { printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already " "installed\n", @@ -102,20 +102,20 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) /* The temperature transition interrupt handler setup */ h = THERMAL_APIC_VECTOR; /* our delivery vector */ h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */ - apic_write_around(APIC_LVTTHMR, h); + apic_write(APIC_LVTTHMR, h); - rdmsr (MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); /* ok we're good to go... */ vendor_thermal_interrupt = intel_thermal_interrupt; - - rdmsr (MSR_IA32_MISC_ENABLE, l, h); - wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h); - l = apic_read (APIC_LVTTHMR); - apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h); + + l = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); /* enable thermal throttle processing */ atomic_set(&therm_throt_en, 1); @@ -129,28 +129,28 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) { u32 h; - rdmsr (MSR_IA32_MCG_EAX, r->eax, h); - rdmsr (MSR_IA32_MCG_EBX, r->ebx, h); - rdmsr (MSR_IA32_MCG_ECX, r->ecx, h); - rdmsr (MSR_IA32_MCG_EDX, r->edx, h); - rdmsr (MSR_IA32_MCG_ESI, r->esi, h); - rdmsr (MSR_IA32_MCG_EDI, r->edi, h); - rdmsr (MSR_IA32_MCG_EBP, r->ebp, h); - rdmsr (MSR_IA32_MCG_ESP, r->esp, h); - rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h); - rdmsr (MSR_IA32_MCG_EIP, r->eip, h); + rdmsr(MSR_IA32_MCG_EAX, r->eax, h); + rdmsr(MSR_IA32_MCG_EBX, r->ebx, h); + rdmsr(MSR_IA32_MCG_ECX, r->ecx, h); + rdmsr(MSR_IA32_MCG_EDX, r->edx, h); + rdmsr(MSR_IA32_MCG_ESI, r->esi, h); + rdmsr(MSR_IA32_MCG_EDI, r->edi, h); + rdmsr(MSR_IA32_MCG_EBP, r->ebp, h); + rdmsr(MSR_IA32_MCG_ESP, r->esp, h); + rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h); + rdmsr(MSR_IA32_MCG_EIP, r->eip, h); } -static void intel_machine_check(struct pt_regs * regs, long error_code) +static void intel_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -191,20 +191,20 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } if (recover & 2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover & 1) - panic ("Unable to continue"); + panic("Unable to continue"); printk(KERN_EMERG "Attempting to continue.\n"); - /* - * Do not clear the MSR_IA32_MCi_STATUS if the error is not + /* + * Do not clear the MSR_IA32_MCi_STATUS if the error is not * recoverable/continuable.This will allow BIOS to look at the MSRs * for errors if the OS could not log the error. */ - for (i=0; i<nr_mce_banks; i++) { + for (i = 0; i < nr_mce_banks; i++) { u32 msr; msr = MSR_IA32_MC0_STATUS+i*4; - rdmsr (msr, low, high); + rdmsr(msr, low, high); if (high&(1<<31)) { /* Clear it */ wrmsr(msr, 0UL, 0UL); @@ -214,7 +214,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } } mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -222,30 +222,30 @@ void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; - + machine_check_vector = intel_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; - for (i=0; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (i = 0; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); /* Check for P4/Xeon extended MCE MSRs */ - rdmsr (MSR_IA32_MCG_CAP, l, h); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<9)) {/* MCG_EXT_P */ mce_num_extended_msrs = (l >> 16) & 0xff; - printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" + printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" " available\n", smp_processor_id(), mce_num_extended_msrs); diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 1f4cc48c14c..d5ae2243f0b 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -35,6 +35,7 @@ atomic_t therm_throt_en = ATOMIC_INIT(0); #define define_therm_throt_sysdev_show_func(name) \ static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \ + struct sysdev_attribute *attr, \ char *buf) \ { \ unsigned int cpu = dev->id; \ diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl new file mode 100644 index 00000000000..dfea390e160 --- /dev/null +++ b/arch/x86/kernel/cpu/mkcapflags.pl @@ -0,0 +1,32 @@ +#!/usr/bin/perl +# +# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h +# + +($in, $out) = @ARGV; + +open(IN, "< $in\0") or die "$0: cannot open: $in: $!\n"; +open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n"; + +print OUT "#include <asm/cpufeature.h>\n\n"; +print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n"; + +while (defined($line = <IN>)) { + if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) { + $macro = $1; + $feature = $2; + $tail = $3; + if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) { + $feature = $1; + } + + if ($feature ne '') { + printf OUT "\t%-32s = \"%s\",\n", + "[$macro]", "\L$feature"; + } + } +} +print OUT "};\n"; + +close(IN); +close(OUT); diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5d241ce94a4..4e8d77f01ee 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = { static unsigned long smp_changes_mask; static struct mtrr_state mtrr_state = {}; static int mtrr_state_set; -static u64 tom2; +u64 mtrr_tom2; #undef MODULE_PARAM_PREFIX #define MODULE_PARAM_PREFIX "mtrr." @@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end) } } - if (tom2) { - if (start >= (1ULL<<32) && (end < tom2)) + if (mtrr_tom2) { + if (start >= (1ULL<<32) && (end < mtrr_tom2)) return MTRR_TYPE_WRBACK; } @@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr) rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi); } +/* fill the MSR pair relating to a var range */ +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi) +{ + struct mtrr_var_range *vr; + + vr = mtrr_state.var_ranges; + + vr[index].base_lo = base_lo; + vr[index].base_hi = base_hi; + vr[index].mask_lo = mask_lo; + vr[index].mask_hi = mask_hi; +} + static void get_fixed_ranges(mtrr_type * frs) { @@ -213,13 +227,13 @@ void __init get_mtrr_state(void) mtrr_state.enabled = (lo & 0xc00) >> 10; if (amd_special_default_mtrr()) { - unsigned lo, hi; + unsigned low, high; /* TOP_MEM2 */ - rdmsr(MSR_K8_TOP_MEM2, lo, hi); - tom2 = hi; - tom2 <<= 32; - tom2 |= lo; - tom2 &= 0xffffff8000000ULL; + rdmsr(MSR_K8_TOP_MEM2, low, high); + mtrr_tom2 = high; + mtrr_tom2 <<= 32; + mtrr_tom2 |= low; + mtrr_tom2 &= 0xffffff800000ULL; } if (mtrr_show) { int high_width; @@ -251,9 +265,9 @@ void __init get_mtrr_state(void) else printk(KERN_INFO "MTRR %u disabled\n", i); } - if (tom2) { + if (mtrr_tom2) { printk(KERN_INFO "TOM2: %016llx aka %lldM\n", - tom2, tom2>>20); + mtrr_tom2, mtrr_tom2>>20); } } mtrr_state_set = 1; @@ -328,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords) if (lo != msrwords[0] || hi != msrwords[1]) { if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 15 && + (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) && ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK)) k8_enable_fixed_iorrs(); mtrr_wrmsr(msr, msrwords[0], msrwords[1]); @@ -365,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, unsigned long *size, mtrr_type *type) { unsigned int mask_lo, mask_hi, base_lo, base_hi; + unsigned int tmp, hi; rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi); if ((mask_lo & 0x800) == 0) { @@ -378,8 +393,18 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi); /* Work out the shifted address mask. */ - mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT) - | mask_lo >> PAGE_SHIFT; + tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT; + mask_lo = size_or_mask | tmp; + /* Expand tmp with high bits to all 1s*/ + hi = fls(tmp); + if (hi > 0) { + tmp |= ~((1<<(hi - 1)) - 1); + + if (tmp != mask_lo) { + WARN_ONCE(1, KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n"); + mask_lo = tmp; + } + } /* This works correctly if size is a power of two, i.e. a contiguous range. */ diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index 84c480bb371..4c4214690dd 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -405,9 +405,9 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset) } /* RED-PEN: base can be > 32bit */ len += seq_printf(seq, - "reg%02i: base=0x%05lx000 (%4luMB), size=%4lu%cB: %s, count=%d\n", + "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n", i, base, base >> (20 - PAGE_SHIFT), size, factor, - mtrr_attrib_to_str(type), mtrr_usage_table[i]); + mtrr_usage_table[i], mtrr_attrib_to_str(type)); } } return 0; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 6a1e278d932..c78c04821ea 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -37,6 +37,7 @@ #include <linux/smp.h> #include <linux/cpu.h> #include <linux/mutex.h> +#include <linux/sort.h> #include <asm/e820.h> #include <asm/mtrr.h> @@ -222,7 +223,7 @@ static void set_mtrr(unsigned int reg, unsigned long base, atomic_set(&data.gate,0); /* Start the ball rolling on other CPUs */ - if (smp_call_function(ipi_handler, &data, 1, 0) != 0) + if (smp_call_function(ipi_handler, &data, 0) != 0) panic("mtrr: timed out waiting for other CPUs\n"); local_irq_save(flags); @@ -609,6 +610,891 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; +/* should be related to MTRR_VAR_RANGES nums */ +#define RANGE_NUM 256 + +struct res_range { + unsigned long start; + unsigned long end; +}; + +static int __init +add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) +{ + /* out of slots */ + if (nr_range >= RANGE_NUM) + return nr_range; + + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; +} + +static int __init +add_range_with_merge(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) +{ + int i; + + /* try to merge it with old one */ + for (i = 0; i < nr_range; i++) { + unsigned long final_start, final_end; + unsigned long common_start, common_end; + + if (!range[i].end) + continue; + + common_start = max(range[i].start, start); + common_end = min(range[i].end, end); + if (common_start > common_end + 1) + continue; + + final_start = min(range[i].start, start); + final_end = max(range[i].end, end); + + range[i].start = final_start; + range[i].end = final_end; + return nr_range; + } + + /* need to add that */ + return add_range(range, nr_range, start, end); +} + +static void __init +subtract_range(struct res_range *range, unsigned long start, unsigned long end) +{ + int i, j; + + for (j = 0; j < RANGE_NUM; j++) { + if (!range[j].end) + continue; + + if (start <= range[j].start && end >= range[j].end) { + range[j].start = 0; + range[j].end = 0; + continue; + } + + if (start <= range[j].start && end < range[j].end && + range[j].start < end + 1) { + range[j].start = end + 1; + continue; + } + + + if (start > range[j].start && end >= range[j].end && + range[j].end > start - 1) { + range[j].end = start - 1; + continue; + } + + if (start > range[j].start && end < range[j].end) { + /* find the new spare */ + for (i = 0; i < RANGE_NUM; i++) { + if (range[i].end == 0) + break; + } + if (i < RANGE_NUM) { + range[i].end = range[j].end; + range[i].start = end + 1; + } else { + printk(KERN_ERR "run of slot in ranges\n"); + } + range[j].end = start - 1; + continue; + } + } +} + +static int __init cmp_range(const void *x1, const void *x2) +{ + const struct res_range *r1 = x1; + const struct res_range *r2 = x2; + long start1, start2; + + start1 = r1->start; + start2 = r2->start; + + return start1 - start2; +} + +struct var_mtrr_range_state { + unsigned long base_pfn; + unsigned long size_pfn; + mtrr_type type; +}; + +static struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; +static int __initdata debug_print; + +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_WRBACK) + continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; + nr_range = add_range_with_merge(range, nr_range, base, + base + size - 1); + } + if (debug_print) { + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + } + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_UNCACHABLE && + type != MTRR_TYPE_WRPROT) + continue; + size = range_state[i].size_pfn; + if (!size) + continue; + base = range_state[i].base_pfn; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, + extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + if (debug_print) { + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + } + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + if (debug_print) { + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + } + + /* clear those is not used */ + for (i = nr_range; i < RANGE_NUM; i++) + memset(&range[i], 0, sizeof(range[i])); + + return nr_range; +} + +static struct res_range __initdata range[RANGE_NUM]; + +#ifdef CONFIG_MTRR_SANITIZER + +static unsigned long __init sum_ranges(struct res_range *range, int nr_range) +{ + unsigned long sum; + int i; + + sum = 0; + for (i = 0; i < nr_range; i++) + sum += range[i].end + 1 - range[i].start; + + return sum; +} + +static int enable_mtrr_cleanup __initdata = + CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup); + +static int __init mtrr_cleanup_debug_setup(char *str) +{ + debug_print = 1; + return 0; +} +early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup); + +struct var_mtrr_state { + unsigned long range_startk; + unsigned long range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; +}; + +static void __init +set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned int address_bits) +{ + u32 base_lo, base_hi, mask_lo, mask_hi; + u64 base, mask; + + if (!sizek) { + fill_mtrr_var_range(reg, 0, 0, 0, 0); + return; + } + + mask = (1ULL << address_bits) - 1; + mask &= ~((((u64)sizek) << 10) - 1); + + base = ((u64)basek) << 10; + + base |= type; + mask |= 0x800; + + base_lo = base & ((1ULL<<32) - 1); + base_hi = base >> 32; + + mask_lo = mask & ((1ULL<<32) - 1); + mask_hi = mask >> 32; + + fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); +} + +static void __init +save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type) +{ + range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10); + range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10); + range_state[reg].type = type; +} + +static void __init +set_var_mtrr_all(unsigned int address_bits) +{ + unsigned long basek, sizek; + unsigned char type; + unsigned int reg; + + for (reg = 0; reg < num_var_ranges; reg++) { + basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10); + sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10); + type = range_state[reg].type; + + set_var_mtrr(reg, basek, sizek, type, address_bits); + } +} + +static unsigned long to_size_factor(unsigned long sizek, char *factorp) +{ + char factor; + unsigned long base = sizek; + + if (base & ((1<<10) - 1)) { + /* not MB alignment */ + factor = 'K'; + } else if (base & ((1<<20) - 1)){ + factor = 'M'; + base >>= 10; + } else { + factor = 'G'; + base >>= 20; + } + + *factorp = factor; + + return base; +} + +static unsigned int __init +range_to_mtrr(unsigned int reg, unsigned long range_startk, + unsigned long range_sizek, unsigned char type) +{ + if (!range_sizek || (reg >= num_var_ranges)) + return reg; + + while (range_sizek) { + unsigned long max_align, align; + unsigned long sizek; + + /* Compute the maximum size I can make a range */ + if (range_startk) + max_align = ffs(range_startk) - 1; + else + max_align = 32; + align = fls(range_sizek) - 1; + if (align > max_align) + align = max_align; + + sizek = 1 << align; + if (debug_print) { + char start_factor = 'K', size_factor = 'K'; + unsigned long start_base, size_base; + + start_base = to_size_factor(range_startk, &start_factor), + size_base = to_size_factor(sizek, &size_factor), + + printk(KERN_DEBUG "Setting variable MTRR %d, " + "base: %ld%cB, range: %ld%cB, type %s\n", + reg, start_base, start_factor, + size_base, size_factor, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); + } + save_var_mtrr(reg++, range_startk, sizek, type); + range_startk += sizek; + range_sizek -= sizek; + if (reg >= num_var_ranges) + break; + } + return reg; +} + +static unsigned __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, + unsigned long sizek) +{ + unsigned long hole_basek, hole_sizek; + unsigned long second_basek, second_sizek; + unsigned long range0_basek, range0_sizek; + unsigned long range_basek, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + + hole_basek = 0; + hole_sizek = 0; + second_basek = 0; + second_sizek = 0; + chunk_sizek = state->chunk_sizek; + gran_sizek = state->gran_sizek; + + /* align with gran size, prevent small block used up MTRRs */ + range_basek = ALIGN(state->range_startk, gran_sizek); + if ((range_basek > basek) && basek) + return second_sizek; + state->range_sizek -= (range_basek - state->range_startk); + range_sizek = ALIGN(state->range_sizek, gran_sizek); + + while (range_sizek > state->range_sizek) { + range_sizek -= gran_sizek; + if (!range_sizek) + return 0; + } + state->range_sizek = range_sizek; + + /* try to append some small hole */ + range0_basek = state->range_startk; + range0_sizek = ALIGN(state->range_sizek, chunk_sizek); + + /* no increase */ + if (range0_sizek == state->range_sizek) { + if (debug_print) + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", + range0_basek<<10, + (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK); + return 0; + } + + /* only cut back, when it is not the last */ + if (sizek) { + while (range0_basek + range0_sizek > (basek + sizek)) { + if (range0_sizek >= chunk_sizek) + range0_sizek -= chunk_sizek; + else + range0_sizek = 0; + + if (!range0_sizek) + break; + } + } + +second_try: + range_basek = range0_basek + range0_sizek; + + /* one hole in the middle */ + if (range_basek > basek && range_basek <= (basek + sizek)) + second_sizek = range_basek - basek; + + if (range0_sizek > state->range_sizek) { + + /* one hole in middle or at end */ + hole_sizek = range0_sizek - state->range_sizek - second_sizek; + + /* hole size should be less than half of range0 size */ + if (hole_sizek >= (range0_sizek >> 1) && + range0_sizek >= chunk_sizek) { + range0_sizek -= chunk_sizek; + second_sizek = 0; + hole_sizek = 0; + + goto second_try; + } + } + + if (range0_sizek) { + if (debug_print) + printk(KERN_DEBUG "range0: %016lx - %016lx\n", + range0_basek<<10, + (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK); + } + + if (range0_sizek < state->range_sizek) { + /* need to handle left over */ + range_sizek = state->range_sizek - range0_sizek; + + if (debug_print) + printk(KERN_DEBUG "range: %016lx - %016lx\n", + range_basek<<10, + (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, + range_sizek, MTRR_TYPE_WRBACK); + } + + if (hole_sizek) { + hole_basek = range_basek - hole_sizek - second_sizek; + if (debug_print) + printk(KERN_DEBUG "hole: %016lx - %016lx\n", + hole_basek<<10, + (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, + hole_sizek, MTRR_TYPE_UNCACHABLE); + } + + return second_sizek; +} + +static void __init +set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, + unsigned long size_pfn) +{ + unsigned long basek, sizek; + unsigned long second_sizek = 0; + + if (state->reg >= num_var_ranges) + return; + + basek = base_pfn << (PAGE_SHIFT - 10); + sizek = size_pfn << (PAGE_SHIFT - 10); + + /* See if I can merge with the last range */ + if ((basek <= 1024) || + (state->range_startk + state->range_sizek == basek)) { + unsigned long endk = basek + sizek; + state->range_sizek = endk - state->range_startk; + return; + } + /* Write the range mtrrs */ + if (state->range_sizek != 0) + second_sizek = range_to_mtrr_with_hole(state, basek, sizek); + + /* Allocate an msr */ + state->range_startk = basek + second_sizek; + state->range_sizek = sizek - second_sizek; +} + +/* mininum size of mtrr block that can take hole */ +static u64 mtrr_chunk_size __initdata = (256ULL<<20); + +static int __init parse_mtrr_chunk_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_chunk_size = memparse(p, &p); + return 0; +} +early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); + +/* granity of mtrr of block */ +static u64 mtrr_gran_size __initdata; + +static int __init parse_mtrr_gran_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_gran_size = memparse(p, &p); + return 0; +} +early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); + +static int nr_mtrr_spare_reg __initdata = + CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT; + +static int __init parse_mtrr_spare_reg(char *arg) +{ + if (arg) + nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0); + return 0; +} + +early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg); + +static int __init +x86_setup_var_mtrrs(struct res_range *range, int nr_range, + u64 chunk_size, u64 gran_size) +{ + struct var_mtrr_state var_state; + int i; + int num_reg; + + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.chunk_sizek = chunk_size >> 10; + var_state.gran_sizek = gran_size >> 10; + + memset(range_state, 0, sizeof(range_state)); + + /* Write the range etc */ + for (i = 0; i < nr_range; i++) + set_var_mtrr_range(&var_state, range[i].start, + range[i].end - range[i].start + 1); + + /* Write the last range */ + if (var_state.range_sizek != 0) + range_to_mtrr_with_hole(&var_state, 0, 0); + + num_reg = var_state.reg; + /* Clear out the extra MTRR's */ + while (var_state.reg < num_var_ranges) { + save_var_mtrr(var_state.reg, 0, 0, 0); + var_state.reg++; + } + + return num_reg; +} + +struct mtrr_cleanup_result { + unsigned long gran_sizek; + unsigned long chunk_sizek; + unsigned long lose_cover_sizek; + unsigned int num_reg; + int bad; +}; + +/* + * gran_size: 64K, 128K, 256K, 512K, 1M, 2M, ..., 2G + * chunk size: gran_size, ..., 2G + * so we need (1+16)*8 + */ +#define NUM_RESULT 136 +#define PSHIFT (PAGE_SHIFT - 10) + +static struct mtrr_cleanup_result __initdata result[NUM_RESULT]; +static struct res_range __initdata range_new[RANGE_NUM]; +static unsigned long __initdata min_loss_pfn[RANGE_NUM]; + +static int __init mtrr_cleanup(unsigned address_bits) +{ + unsigned long extra_remove_base, extra_remove_size; + unsigned long base, size, def, dummy; + mtrr_type type; + int nr_range, nr_range_new; + u64 chunk_size, gran_size; + unsigned long range_sums, range_sums_new; + int index_good; + int num_reg_good; + int i; + + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; + + if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1) + return 0; + rdmsr(MTRRdefType_MSR, def, dummy); + def &= 0xff; + if (def != MTRR_TYPE_UNCACHABLE) + return 0; + + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + size = range_state[i].size_pfn; + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + if (type == MTRR_TYPE_WRPROT) + type = MTRR_TYPE_UNCACHABLE; + num[type]++; + } + + /* check if we got UC entries */ + if (!num[MTRR_TYPE_UNCACHABLE]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + /* print original var MTRRs at first, for debugging: */ + printk(KERN_DEBUG "original variable MTRRs\n"); + for (i = 0; i < num_var_ranges; i++) { + char start_factor = 'K', size_factor = 'K'; + unsigned long start_base, size_base; + + size_base = range_state[i].size_pfn << (PAGE_SHIFT - 10); + if (!size_base) + continue; + + size_base = to_size_factor(size_base, &size_factor), + start_base = range_state[i].base_pfn << (PAGE_SHIFT - 10); + start_base = to_size_factor(start_base, &start_factor), + type = range_state[i].type; + + printk(KERN_DEBUG "reg %d, base: %ld%cB, range: %ld%cB, type %s\n", + i, start_base, start_factor, + size_base, size_factor, + (type == MTRR_TYPE_UNCACHABLE) ? "UC" : + ((type == MTRR_TYPE_WRPROT) ? "WP" : + ((type == MTRR_TYPE_WRBACK) ? "WB" : "Other")) + ); + } + + memset(range, 0, sizeof(range)); + extra_remove_size = 0; + extra_remove_base = 1 << (32 - PAGE_SHIFT); + if (mtrr_tom2) + extra_remove_size = + (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base; + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, + extra_remove_size); + /* + * [0, 1M) should always be coverred by var mtrr with WB + * and fixed mtrrs should take effective before var mtrr for it + */ + nr_range = add_range_with_merge(range, nr_range, 0, + (1ULL<<(20 - PAGE_SHIFT)) - 1); + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + + range_sums = sum_ranges(range, nr_range); + printk(KERN_INFO "total RAM coverred: %ldM\n", + range_sums >> (20 - PAGE_SHIFT)); + + if (mtrr_chunk_size && mtrr_gran_size) { + int num_reg; + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + + debug_print++; + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, + mtrr_gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, + extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + i = 0; + result[i].chunk_sizek = mtrr_chunk_size >> 10; + result[i].gran_sizek = mtrr_gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t", + result[i].bad?"*BAD*":" ", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n", + result[i].num_reg, result[i].bad?"-":"", + lose_base, lose_factor); + if (!result[i].bad) { + set_var_mtrr_all(address_bits); + return 1; + } + printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " + "will find optimal one\n"); + debug_print--; + memset(result, 0, sizeof(result[0])); + } + + i = 0; + memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn)); + memset(result, 0, sizeof(result)); + for (gran_size = (1ULL<<16); gran_size < (1ULL<<32); gran_size <<= 1) { + char gran_factor; + unsigned long gran_base; + + if (debug_print) + gran_base = to_size_factor(gran_size >> 10, &gran_factor); + + for (chunk_size = gran_size; chunk_size < (1ULL<<32); + chunk_size <<= 1) { + int num_reg; + + if (debug_print) { + char chunk_factor; + unsigned long chunk_base; + + chunk_base = to_size_factor(chunk_size>>10, &chunk_factor), + printk(KERN_INFO "\n"); + printk(KERN_INFO "gran_size: %ld%c chunk_size: %ld%c \n", + gran_base, gran_factor, chunk_base, chunk_factor); + } + if (i >= NUM_RESULT) + continue; + + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, + chunk_size, gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + result[i].chunk_sizek = chunk_size >> 10; + result[i].gran_sizek = gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + /* double check it */ + if (!result[i].bad && !result[i].lose_cover_sizek) { + if (nr_range_new != nr_range || + memcmp(range, range_new, sizeof(range))) + result[i].bad = 1; + } + + if (!result[i].bad && (range_sums - range_sums_new < + min_loss_pfn[num_reg])) { + min_loss_pfn[num_reg] = + range_sums - range_sums_new; + } + i++; + } + } + + /* print out all */ + for (i = 0; i < NUM_RESULT; i++) { + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t", + result[i].bad?"*BAD*":" ", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n", + result[i].num_reg, result[i].bad?"-":"", + lose_base, lose_factor); + } + + /* try to find the optimal index */ + if (nr_mtrr_spare_reg >= num_var_ranges) + nr_mtrr_spare_reg = num_var_ranges - 1; + num_reg_good = -1; + for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) { + if (!min_loss_pfn[i]) + num_reg_good = i; + } + + index_good = -1; + if (num_reg_good != -1) { + for (i = 0; i < NUM_RESULT; i++) { + if (!result[i].bad && + result[i].num_reg == num_reg_good && + !result[i].lose_cover_sizek) { + index_good = i; + break; + } + } + } + + if (index_good != -1) { + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + + printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); + i = index_good; + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "gran_size: %ld%c \tchunk_size: %ld%c \t", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose RAM: %ld%c\n", + result[i].num_reg, lose_base, lose_factor); + /* convert ranges to var ranges state */ + chunk_size = result[i].chunk_sizek; + chunk_size <<= 10; + gran_size = result[i].gran_sizek; + gran_size <<= 10; + debug_print++; + x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); + debug_print--; + set_var_mtrr_all(address_bits); + return 1; + } + + printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n"); + printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n"); + + return 0; +} +#else +static int __init mtrr_cleanup(unsigned address_bits) +{ + return 0; +} +#endif + +static int __initdata changed_by_mtrr_cleanup; + static int disable_mtrr_trim; static int __init disable_mtrr_trim_setup(char *str) @@ -648,6 +1534,19 @@ int __init amd_special_default_mtrr(void) return 0; } +static u64 __init real_trim_memory(unsigned long start_pfn, + unsigned long limit_pfn) +{ + u64 trim_start, trim_size; + trim_start = start_pfn; + trim_start <<= PAGE_SHIFT; + trim_size = limit_pfn; + trim_size <<= PAGE_SHIFT; + trim_size -= trim_start; + + return e820_update_range(trim_start, trim_size, E820_RAM, + E820_RESERVED); +} /** * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs * @end_pfn: ending page frame number @@ -663,8 +1562,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - u64 trim_start, trim_size; + int nr_range; + u64 total_trim_size; + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; /* * Make sure we only trim uncachable memory on machines that * support the Intel MTRR architecture: @@ -676,44 +1578,92 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - if (amd_special_default_mtrr()) - return 0; + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } /* Find highest cached pfn */ for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; if (type != MTRR_TYPE_WRBACK) continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; if (highest_pfn < base + size) highest_pfn = base + size; } /* kvm/qemu doesn't have mtrr set right, don't trim them all */ if (!highest_pfn) { - if (!kvm_para_available()) { - printk(KERN_WARNING + WARN(!kvm_para_available(), KERN_WARNING "WARNING: strange, CPU MTRRs all blank?\n"); - WARN_ON(1); - } return 0; } - if (highest_pfn < end_pfn) { + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type >= MTRR_NUM_TYPES) + continue; + size = range_state[i].size_pfn; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* no entry for WB? */ + if (!num[MTRR_TYPE_WRBACK]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + nr_range = 0; + if (mtrr_tom2) { + range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT)); + range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1; + if (highest_pfn < range[nr_range].end + 1) + highest_pfn = range[nr_range].end + 1; + nr_range++; + } + nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); + + total_trim_size = 0; + /* check the head */ + if (range[0].start) + total_trim_size += real_trim_memory(0, range[0].start); + /* check the holes */ + for (i = 0; i < nr_range - 1; i++) { + if (range[i].end + 1 < range[i+1].start) + total_trim_size += real_trim_memory(range[i].end + 1, + range[i+1].start); + } + /* check the top */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) + total_trim_size += real_trim_memory(range[i].end + 1, + end_pfn); + + if (total_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %luMB of RAM.\n", - (end_pfn - highest_pfn) >> (20 - PAGE_SHIFT)); + " all of memory, losing %lluMB of RAM.\n", + total_trim_size >> 20); - WARN_ON(1); + if (!changed_by_mtrr_cleanup) + WARN_ON(1); printk(KERN_INFO "update e820 for mtrr\n"); - trim_start = highest_pfn; - trim_start <<= PAGE_SHIFT; - trim_size = end_pfn; - trim_size <<= PAGE_SHIFT; - trim_size -= trim_start; - update_memory_range(trim_start, trim_size, E820_RAM, - E820_RESERVED); update_e820(); + return 1; } @@ -729,18 +1679,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) */ void __init mtrr_bp_init(void) { + u32 phys_addr; init_ifs(); + phys_addr = 32; + if (cpu_has_mtrr) { mtrr_if = &generic_mtrr_ops; size_or_mask = 0xff000000; /* 36 bits */ size_and_mask = 0x00f00000; + phys_addr = 36; /* This is an AMD specific MSR, but we assume(hope?) that Intel will implement it to when they extend the address bus of the Xeon. */ if (cpuid_eax(0x80000000) >= 0x80000008) { - u32 phys_addr; phys_addr = cpuid_eax(0x80000008) & 0xff; /* CPUID workaround for Intel 0F33/0F34 CPU */ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && @@ -758,6 +1711,7 @@ void __init mtrr_bp_init(void) don't support PAE */ size_or_mask = 0xfff00000; /* 32 bits */ size_and_mask = 0; + phys_addr = 32; } } else { switch (boot_cpu_data.x86_vendor) { @@ -791,8 +1745,15 @@ void __init mtrr_bp_init(void) if (mtrr_if) { set_num_var_ranges(); init_table(); - if (use_intel()) + if (use_intel()) { get_mtrr_state(); + + if (mtrr_cleanup(phys_addr)) { + changed_by_mtrr_cleanup = 1; + mtrr_if->set_all(); + } + + } } } @@ -822,16 +1783,17 @@ void mtrr_ap_init(void) */ void mtrr_save_state(void) { - smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1, 1); + smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1); } static int __init mtrr_init_finialize(void) { if (!mtrr_if) return 0; - if (use_intel()) - mtrr_state_warn(); - else { + if (use_intel()) { + if (!changed_by_mtrr_cleanup) + mtrr_state_warn(); + } else { /* The CPUs haven't MTRR and seem to not support SMP. They have * specific drivers, we use a tricky method to support * suspend/resume for them. diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h index 2cc77eb6fea..2dc4ec656b2 100644 --- a/arch/x86/kernel/cpu/mtrr/mtrr.h +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt); void set_mtrr_cache_disable(struct set_mtrr_context *ctxt); void set_mtrr_prepare_save(struct set_mtrr_context *ctxt); +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi); void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); @@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if; #define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1) extern unsigned int num_var_ranges; +extern u64 mtrr_tom2; void mtrr_state_warn(void); const char *mtrr_attrib_to_str(int x); diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index f9ae93adffe..6bff382094f 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -1,11 +1,15 @@ -/* local apic based NMI watchdog for various CPUs. - This file also handles reservation of performance counters for coordination - with other users (like oprofile). - - Note that these events normally don't tick when the CPU idles. This means - the frequency varies with CPU load. - - Original code for K7/P6 written by Keith Owens */ +/* + * local apic based NMI watchdog for various CPUs. + * + * This file also handles reservation of performance counters for coordination + * with other users (like oprofile). + * + * Note that these events normally don't tick when the CPU idles. This means + * the frequency varies with CPU load. + * + * Original code for K7/P6 written by Keith Owens + * + */ #include <linux/percpu.h> #include <linux/module.h> @@ -36,12 +40,16 @@ struct wd_ops { static const struct wd_ops *wd_ops; -/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's - * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) +/* + * this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's + * offset from MSR_P4_BSU_ESCR0. + * + * It will be the max for all platforms (for now) */ #define NMI_MAX_COUNTER_BITS 66 -/* perfctr_nmi_owner tracks the ownership of the perfctr registers: +/* + * perfctr_nmi_owner tracks the ownership of the perfctr registers: * evtsel_nmi_owner tracks the ownership of the event selection * - different performance counters/ event selection may be reserved for * different subsystems this reservation system just tries to coordinate @@ -73,8 +81,10 @@ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) return 0; } -/* converts an msr to an appropriate reservation bit */ -/* returns the bit offset of the event selection register */ +/* + * converts an msr to an appropriate reservation bit + * returns the bit offset of the event selection register + */ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) { /* returns the bit offset of the event selection register */ @@ -114,6 +124,7 @@ int avail_to_resrv_perfctr_nmi(unsigned int msr) return (!test_bit(counter, perfctr_nmi_owner)); } +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); int reserve_perfctr_nmi(unsigned int msr) { @@ -128,6 +139,7 @@ int reserve_perfctr_nmi(unsigned int msr) return 1; return 0; } +EXPORT_SYMBOL(reserve_perfctr_nmi); void release_perfctr_nmi(unsigned int msr) { @@ -140,6 +152,7 @@ void release_perfctr_nmi(unsigned int msr) clear_bit(counter, perfctr_nmi_owner); } +EXPORT_SYMBOL(release_perfctr_nmi); int reserve_evntsel_nmi(unsigned int msr) { @@ -154,6 +167,7 @@ int reserve_evntsel_nmi(unsigned int msr) return 1; return 0; } +EXPORT_SYMBOL(reserve_evntsel_nmi); void release_evntsel_nmi(unsigned int msr) { @@ -166,11 +180,6 @@ void release_evntsel_nmi(unsigned int msr) clear_bit(counter, evntsel_nmi_owner); } - -EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); -EXPORT_SYMBOL(reserve_perfctr_nmi); -EXPORT_SYMBOL(release_perfctr_nmi); -EXPORT_SYMBOL(reserve_evntsel_nmi); EXPORT_SYMBOL(release_evntsel_nmi); void disable_lapic_nmi_watchdog(void) @@ -180,8 +189,10 @@ void disable_lapic_nmi_watchdog(void) if (atomic_read(&nmi_active) <= 0) return; - on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); - wd_ops->unreserve(); + on_each_cpu(stop_apic_nmi_watchdog, NULL, 1); + + if (wd_ops) + wd_ops->unreserve(); BUG_ON(atomic_read(&nmi_active) != 0); } @@ -202,7 +213,7 @@ void enable_lapic_nmi_watchdog(void) return; } - on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); + on_each_cpu(setup_apic_nmi_watchdog, NULL, 1); touch_nmi_watchdog(); } @@ -232,31 +243,32 @@ static unsigned int adjust_for_32bit_ctr(unsigned int hz) return retval; } -static void -write_watchdog_counter(unsigned int perfctr_msr, const char *descr, unsigned nmi_hz) +static void write_watchdog_counter(unsigned int perfctr_msr, + const char *descr, unsigned nmi_hz) { u64 count = (u64)cpu_khz * 1000; do_div(count, nmi_hz); if(descr) - Dprintk("setting %s to -0x%08Lx\n", descr, count); + pr_debug("setting %s to -0x%08Lx\n", descr, count); wrmsrl(perfctr_msr, 0 - count); } static void write_watchdog_counter32(unsigned int perfctr_msr, - const char *descr, unsigned nmi_hz) + const char *descr, unsigned nmi_hz) { u64 count = (u64)cpu_khz * 1000; do_div(count, nmi_hz); if(descr) - Dprintk("setting %s to -0x%08Lx\n", descr, count); + pr_debug("setting %s to -0x%08Lx\n", descr, count); wrmsr(perfctr_msr, (u32)(-count), 0); } -/* AMD K7/K8/Family10h/Family11h support. AMD keeps this interface - nicely stable so there is not much variety */ - +/* + * AMD K7/K8/Family10h/Family11h support. + * AMD keeps this interface nicely stable so there is not much variety + */ #define K7_EVNTSEL_ENABLE (1 << 22) #define K7_EVNTSEL_INT (1 << 20) #define K7_EVNTSEL_OS (1 << 17) @@ -283,13 +295,19 @@ static int setup_k7_watchdog(unsigned nmi_hz) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz); + + /* initialize the wd struct before enabling */ + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; wrmsr(evntsel_msr, evntsel, 0); - wd->perfctr_msr = perfctr_msr; - wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = 0; //unused return 1; } @@ -325,18 +343,19 @@ static void single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) } static const struct wd_ops k7_wd_ops = { - .reserve = single_msr_reserve, - .unreserve = single_msr_unreserve, - .setup = setup_k7_watchdog, - .rearm = single_msr_rearm, - .stop = single_msr_stop_watchdog, - .perfctr = MSR_K7_PERFCTR0, - .evntsel = MSR_K7_EVNTSEL0, - .checkbit = 1ULL<<47, + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_k7_watchdog, + .rearm = single_msr_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_K7_PERFCTR0, + .evntsel = MSR_K7_EVNTSEL0, + .checkbit = 1ULL << 47, }; -/* Intel Model 6 (PPro+,P2,P3,P-M,Core1) */ - +/* + * Intel Model 6 (PPro+,P2,P3,P-M,Core1) + */ #define P6_EVNTSEL0_ENABLE (1 << 22) #define P6_EVNTSEL_INT (1 << 20) #define P6_EVNTSEL_OS (1 << 17) @@ -366,58 +385,91 @@ static int setup_p6_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); nmi_hz = adjust_for_32bit_ctr(nmi_hz); write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz); + + /* initialize the wd struct before enabling */ + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); - wd->perfctr_msr = perfctr_msr; - wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = 0; //unused return 1; } static void p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) { - /* P6 based Pentium M need to re-unmask + /* + * P6 based Pentium M need to re-unmask * the apic vector but it doesn't hurt * other P6 variant. - * ArchPerfom/Core Duo also needs this */ + * ArchPerfom/Core Duo also needs this + */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* P6/ARCH_PERFMON has 32 bit counter write */ write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz); } static const struct wd_ops p6_wd_ops = { - .reserve = single_msr_reserve, - .unreserve = single_msr_unreserve, - .setup = setup_p6_watchdog, - .rearm = p6_rearm, - .stop = single_msr_stop_watchdog, - .perfctr = MSR_P6_PERFCTR0, - .evntsel = MSR_P6_EVNTSEL0, - .checkbit = 1ULL<<39, + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_p6_watchdog, + .rearm = p6_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_P6_PERFCTR0, + .evntsel = MSR_P6_EVNTSEL0, + .checkbit = 1ULL << 39, }; -/* Intel P4 performance counters. By far the most complicated of all. */ - -#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) -#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) -#define P4_ESCR_OS (1<<3) -#define P4_ESCR_USR (1<<2) -#define P4_CCCR_OVF_PMI0 (1<<26) -#define P4_CCCR_OVF_PMI1 (1<<27) -#define P4_CCCR_THRESHOLD(N) ((N)<<20) -#define P4_CCCR_COMPLEMENT (1<<19) -#define P4_CCCR_COMPARE (1<<18) -#define P4_CCCR_REQUIRED (3<<16) -#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) -#define P4_CCCR_ENABLE (1<<12) -#define P4_CCCR_OVF (1<<31) - -/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter - CRU_ESCR0 (with any non-null event selector) through a complemented - max threshold. [IA32-Vol3, Section 14.9.9] */ - +/* + * Intel P4 performance counters. + * By far the most complicated of all. + */ +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1 << 7) +#define P4_ESCR_EVENT_SELECT(N) ((N) << 25) +#define P4_ESCR_OS (1 << 3) +#define P4_ESCR_USR (1 << 2) +#define P4_CCCR_OVF_PMI0 (1 << 26) +#define P4_CCCR_OVF_PMI1 (1 << 27) +#define P4_CCCR_THRESHOLD(N) ((N) << 20) +#define P4_CCCR_COMPLEMENT (1 << 19) +#define P4_CCCR_COMPARE (1 << 18) +#define P4_CCCR_REQUIRED (3 << 16) +#define P4_CCCR_ESCR_SELECT(N) ((N) << 13) +#define P4_CCCR_ENABLE (1 << 12) +#define P4_CCCR_OVF (1 << 31) + +#define P4_CONTROLS 18 +static unsigned int p4_controls[18] = { + MSR_P4_BPU_CCCR0, + MSR_P4_BPU_CCCR1, + MSR_P4_BPU_CCCR2, + MSR_P4_BPU_CCCR3, + MSR_P4_MS_CCCR0, + MSR_P4_MS_CCCR1, + MSR_P4_MS_CCCR2, + MSR_P4_MS_CCCR3, + MSR_P4_FLAME_CCCR0, + MSR_P4_FLAME_CCCR1, + MSR_P4_FLAME_CCCR2, + MSR_P4_FLAME_CCCR3, + MSR_P4_IQ_CCCR0, + MSR_P4_IQ_CCCR1, + MSR_P4_IQ_CCCR2, + MSR_P4_IQ_CCCR3, + MSR_P4_IQ_CCCR4, + MSR_P4_IQ_CCCR5, +}; +/* + * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + * CRU_ESCR0 (with any non-null event selector) through a complemented + * max threshold. [IA32-Vol3, Section 14.9.9] + */ static int setup_p4_watchdog(unsigned nmi_hz) { unsigned int perfctr_msr, evntsel_msr, cccr_msr; @@ -442,7 +494,8 @@ static int setup_p4_watchdog(unsigned nmi_hz) #endif ht_num = 0; - /* performance counters are shared resources + /* + * performance counters are shared resources * assign each hyperthread its own set * (re-use the ESCR0 register, seems safe * and keeps the cccr_val the same) @@ -453,12 +506,38 @@ static int setup_p4_watchdog(unsigned nmi_hz) evntsel_msr = MSR_P4_CRU_ESCR0; cccr_msr = MSR_P4_IQ_CCCR0; cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); + + /* + * If we're on the kdump kernel or other situation, we may + * still have other performance counter registers set to + * interrupt and they'll keep interrupting forever because + * of the P4_CCCR_OVF quirk. So we need to ACK all the + * pending interrupts and disable all the registers here, + * before reenabling the NMI delivery. Refer to p4_rearm() + * about the P4_CCCR_OVF quirk. + */ + if (reset_devices) { + unsigned int low, high; + int i; + + for (i = 0; i < P4_CONTROLS; i++) { + rdmsr(p4_controls[i], low, high); + low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF); + wrmsr(p4_controls[i], low, high); + } + } } else { /* logical cpu 1 */ perfctr_msr = MSR_P4_IQ_PERFCTR1; evntsel_msr = MSR_P4_CRU_ESCR0; cccr_msr = MSR_P4_IQ_CCCR1; - cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); + + /* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */ + if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4) + cccr_val = P4_CCCR_OVF_PMI0; + else + cccr_val = P4_CCCR_OVF_PMI1; + cccr_val |= P4_CCCR_ESCR_SELECT(4); } evntsel = P4_ESCR_EVENT_SELECT(0x3F) @@ -473,12 +552,17 @@ static int setup_p4_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); wrmsr(cccr_msr, cccr_val, 0); write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - cccr_val |= P4_CCCR_ENABLE; - wrmsr(cccr_msr, cccr_val, 0); + wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = cccr_msr; + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); return 1; } @@ -540,20 +624,21 @@ static void p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) } static const struct wd_ops p4_wd_ops = { - .reserve = p4_reserve, - .unreserve = p4_unreserve, - .setup = setup_p4_watchdog, - .rearm = p4_rearm, - .stop = stop_p4_watchdog, + .reserve = p4_reserve, + .unreserve = p4_unreserve, + .setup = setup_p4_watchdog, + .rearm = p4_rearm, + .stop = stop_p4_watchdog, /* RED-PEN this is wrong for the other sibling */ - .perfctr = MSR_P4_BPU_PERFCTR0, - .evntsel = MSR_P4_BSU_ESCR0, - .checkbit = 1ULL<<39, + .perfctr = MSR_P4_BPU_PERFCTR0, + .evntsel = MSR_P4_BSU_ESCR0, + .checkbit = 1ULL << 39, }; -/* Watchdog using the Intel architected PerfMon. Used for Core2 and hopefully - all future Intel CPUs. */ - +/* + * Watchdog using the Intel architected PerfMon. + * Used for Core2 and hopefully all future Intel CPUs. + */ #define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL #define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK @@ -593,25 +678,29 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); nmi_hz = adjust_for_32bit_ctr(nmi_hz); write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = 0; //unused + wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1); return 1; } static struct wd_ops intel_arch_wd_ops __read_mostly = { - .reserve = single_msr_reserve, - .unreserve = single_msr_unreserve, - .setup = setup_intel_arch_watchdog, - .rearm = p6_rearm, - .stop = single_msr_stop_watchdog, - .perfctr = MSR_ARCH_PERFMON_PERFCTR1, - .evntsel = MSR_ARCH_PERFMON_EVENTSEL1, + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_intel_arch_watchdog, + .rearm = p6_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_ARCH_PERFMON_PERFCTR1, + .evntsel = MSR_ARCH_PERFMON_EVENTSEL1, }; static void probe_nmi_watchdog(void) @@ -624,8 +713,10 @@ static void probe_nmi_watchdog(void) wd_ops = &k7_wd_ops; break; case X86_VENDOR_INTEL: - /* Work around Core Duo (Yonah) errata AE49 where perfctr1 - doesn't have a working enable bit. */ + /* + * Work around Core Duo (Yonah) errata AE49 where perfctr1 + * doesn't have a working enable bit. + */ if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) { intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0; intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0; @@ -636,7 +727,7 @@ static void probe_nmi_watchdog(void) } switch (boot_cpu_data.x86) { case 6: - if (boot_cpu_data.x86_model > 0xd) + if (boot_cpu_data.x86_model > 13) return; wd_ops = &p6_wd_ops; @@ -697,10 +788,11 @@ int lapic_wd_event(unsigned nmi_hz) { struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); u64 ctr; + rdmsrl(wd->perfctr_msr, ctr); - if (ctr & wd_ops->checkbit) { /* perfctr still running? */ + if (ctr & wd_ops->checkbit) /* perfctr still running? */ return 0; - } + wd_ops->rearm(wd, nmi_hz); return 1; } diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c new file mode 100644 index 00000000000..5abbea297e0 --- /dev/null +++ b/arch/x86/kernel/cpu/powerflags.c @@ -0,0 +1,20 @@ +/* + * Strings for the various x86 power flags + * + * This file must not contain any executable code. + */ + +#include <asm/cpufeature.h> + +const char *const x86_power_flags[32] = { + "ts", /* temperature sensor */ + "fid", /* frequency id control */ + "vid", /* voltage id control */ + "ttp", /* thermal trip */ + "tm", + "stc", + "100mhzsteps", + "hwpstate", + "", /* tsc invariant mapped to constant_tsc */ + /* nothing */ +}; diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index 0d0d9057e7c..a26c480b949 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -160,7 +160,7 @@ static void *c_start(struct seq_file *m, loff_t *pos) { if (*pos == 0) /* just in case, cpu 0 is not the first */ *pos = first_cpu(cpu_online_map); - if ((*pos) < NR_CPUS && cpu_online(*pos)) + if ((*pos) < nr_cpu_ids && cpu_online(*pos)) return &cpu_data(*pos); return NULL; } diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c index b911a2c61b8..52b3fefbd5a 100644 --- a/arch/x86/kernel/cpu/transmeta.c +++ b/arch/x86/kernel/cpu/transmeta.c @@ -5,6 +5,18 @@ #include <asm/msr.h> #include "cpu.h" +static void __cpuinit early_init_transmeta(struct cpuinfo_x86 *c) +{ + u32 xlvl; + + /* Transmeta-defined flags: level 0x80860001 */ + xlvl = cpuid_eax(0x80860000); + if ((xlvl & 0xffff0000) == 0x80860000) { + if (xlvl >= 0x80860001) + c->x86_capability[2] = cpuid_edx(0x80860001); + } +} + static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; @@ -12,7 +24,8 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; char cpu_info[65]; - get_model_name(c); /* Same as AMD/Cyrix */ + early_init_transmeta(c); + display_cacheinfo(c); /* Print CMS and CPU revision */ @@ -85,23 +98,12 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) #endif } -static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c) -{ - u32 xlvl; - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } -} - static struct cpu_dev transmeta_cpu_dev __cpuinitdata = { .c_vendor = "Transmeta", .c_ident = { "GenuineTMx86", "TransmetaCPU" }, + .c_early_init = early_init_transmeta, .c_init = init_transmeta, - .c_identify = transmeta_identify, + .c_x86_vendor = X86_VENDOR_TRANSMETA, }; -cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev); +cpu_dev_register(transmeta_cpu_dev); diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c index b1fc90989d7..e777f79e096 100644 --- a/arch/x86/kernel/cpu/umc.c +++ b/arch/x86/kernel/cpu/umc.c @@ -19,7 +19,8 @@ static struct cpu_dev umc_cpu_dev __cpuinitdata = { } }, }, + .c_x86_vendor = X86_VENDOR_UMC, }; -cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev); +cpu_dev_register(umc_cpu_dev); diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index daff52a6224..6a44d646599 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -33,9 +33,9 @@ #include <linux/init.h> #include <linux/poll.h> #include <linux/smp.h> +#include <linux/smp_lock.h> #include <linux/major.h> #include <linux/fs.h> -#include <linux/smp_lock.h> #include <linux/device.h> #include <linux/cpu.h> #include <linux/notifier.h> @@ -88,6 +88,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, struct cpuid_regs cmd; int cpu = iminor(file->f_path.dentry->d_inode); u64 pos = *ppos; + ssize_t bytes = 0; + int err = 0; if (count % 16) return -EINVAL; /* Invalid chunk size */ @@ -95,27 +97,40 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, for (; count; count -= 16) { cmd.eax = pos; cmd.ecx = pos >> 32; - smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1); - if (copy_to_user(tmp, &cmd, 16)) - return -EFAULT; + err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1); + if (err) + break; + if (copy_to_user(tmp, &cmd, 16)) { + err = -EFAULT; + break; + } tmp += 16; + bytes += 16; *ppos = ++pos; } - return tmp - buf; + return bytes ? bytes : err; } static int cpuid_open(struct inode *inode, struct file *file) { - unsigned int cpu = iminor(file->f_path.dentry->d_inode); - struct cpuinfo_x86 *c = &cpu_data(cpu); - - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ + unsigned int cpu; + struct cpuinfo_x86 *c; + int ret = 0; + + lock_kernel(); + + cpu = iminor(file->f_path.dentry->d_inode); + if (cpu >= NR_CPUS || !cpu_online(cpu)) { + ret = -ENXIO; /* No such CPU */ + goto out; + } + c = &cpu_data(cpu); if (c->cpuid_level < 0) - return -EIO; /* CPUID not supported */ - - return 0; + ret = -EIO; /* CPUID not supported */ +out: + unlock_kernel(); + return ret; } /* @@ -132,8 +147,8 @@ static __cpuinit int cpuid_device_create(int cpu) { struct device *dev; - dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu), - "cpu%d", cpu); + dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu), + NULL, "cpu%d", cpu); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } diff --git a/arch/x86/kernel/crash_dump_64.c b/arch/x86/kernel/crash_dump_64.c index 15e6c6bc4a4..e90a60ef10c 100644 --- a/arch/x86/kernel/crash_dump_64.c +++ b/arch/x86/kernel/crash_dump_64.c @@ -7,9 +7,8 @@ #include <linux/errno.h> #include <linux/crash_dump.h> - -#include <asm/uaccess.h> -#include <asm/io.h> +#include <linux/uaccess.h> +#include <linux/io.h> /** * copy_oldmem_page - copy one page from "oldmem" @@ -25,7 +24,7 @@ * in the current kernel. We stitch up a pte, similar to kmap_atomic. */ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) + size_t csize, unsigned long offset, int userbuf) { void *vaddr; @@ -33,14 +32,16 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, return 0; vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); + if (!vaddr) + return -ENOMEM; if (userbuf) { - if (copy_to_user(buf, (vaddr + offset), csize)) { + if (copy_to_user(buf, vaddr + offset, csize)) { iounmap(vaddr); return -EFAULT; } } else - memcpy(buf, (vaddr + offset), csize); + memcpy(buf, vaddr + offset, csize); iounmap(vaddr); return csize; diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 11c11b8ec48..2b69994fd3a 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -2,26 +2,49 @@ * Debug Store support * * This provides a low-level interface to the hardware's Debug Store - * feature that is used for last branch recording (LBR) and + * feature that is used for branch trace store (BTS) and * precise-event based sampling (PEBS). * - * Different architectures use a different DS layout/pointer size. - * The below functions therefore work on a void*. + * It manages: + * - per-thread and per-cpu allocation of BTS and PEBS + * - buffer memory allocation (optional) + * - buffer overflow handling + * - buffer access * + * It assumes: + * - get_task_struct on all parameter tasks + * - current is allowed to trace parameter tasks * - * Since there is no user for PEBS, yet, only LBR (or branch - * trace store, BTS) is supported. * - * - * Copyright (C) 2007 Intel Corporation. - * Markus Metzger <markus.t.metzger@intel.com>, Dec 2007 + * Copyright (C) 2007-2008 Intel Corporation. + * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008 */ + +#ifdef CONFIG_X86_DS + #include <asm/ds.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/slab.h> +#include <linux/sched.h> +#include <linux/mm.h> + + +/* + * The configuration for a particular DS hardware implementation. + */ +struct ds_configuration { + /* the size of the DS structure in bytes */ + unsigned char sizeof_ds; + /* the size of one pointer-typed field in the DS structure in bytes; + this covers the first 8 fields related to buffer management. */ + unsigned char sizeof_field; + /* the size of a BTS/PEBS record in bytes */ + unsigned char sizeof_rec[2]; +}; +static struct ds_configuration ds_cfg; /* @@ -44,378 +67,747 @@ * (interrupt occurs when write pointer passes interrupt pointer) * - value to which counter is reset following counter overflow * - * On later architectures, the last branch recording hardware uses - * 64bit pointers even in 32bit mode. - * - * - * Branch Trace Store (BTS) records store information about control - * flow changes. They at least provide the following information: - * - source linear address - * - destination linear address + * Later architectures use 64bit pointers throughout, whereas earlier + * architectures use 32bit pointers in 32bit mode. * - * Netburst supported a predicated bit that had been dropped in later - * architectures. We do not suppor it. * + * We compute the base address for the first 8 fields based on: + * - the field size stored in the DS configuration + * - the relative field position + * - an offset giving the start of the respective region * - * In order to abstract from the actual DS and BTS layout, we describe - * the access to the relevant fields. - * Thanks to Andi Kleen for proposing this design. + * This offset is further used to index various arrays holding + * information for BTS and PEBS at the respective index. * - * The implementation, however, is not as general as it might seem. In - * order to stay somewhat simple and efficient, we assume an - * underlying unsigned type (mostly a pointer type) and we expect the - * field to be at least as big as that type. + * On later 32bit processors, we only access the lower 32bit of the + * 64bit pointer fields. The upper halves will be zeroed out. */ -/* - * A special from_ip address to indicate that the BTS record is an - * info record that needs to be interpreted or skipped. - */ -#define BTS_ESCAPE_ADDRESS (-1) +enum ds_field { + ds_buffer_base = 0, + ds_index, + ds_absolute_maximum, + ds_interrupt_threshold, +}; -/* - * A field access descriptor - */ -struct access_desc { - unsigned char offset; - unsigned char size; +enum ds_qualifier { + ds_bts = 0, + ds_pebs }; +static inline unsigned long ds_get(const unsigned char *base, + enum ds_qualifier qual, enum ds_field field) +{ + base += (ds_cfg.sizeof_field * (field + (4 * qual))); + return *(unsigned long *)base; +} + +static inline void ds_set(unsigned char *base, enum ds_qualifier qual, + enum ds_field field, unsigned long value) +{ + base += (ds_cfg.sizeof_field * (field + (4 * qual))); + (*(unsigned long *)base) = value; +} + + /* - * The configuration for a particular DS/BTS hardware implementation. + * Locking is done only for allocating BTS or PEBS resources and for + * guarding context and buffer memory allocation. + * + * Most functions require the current task to own the ds context part + * they are going to access. All the locking is done when validating + * access to the context. */ -struct ds_configuration { - /* the DS configuration */ - unsigned char sizeof_ds; - struct access_desc bts_buffer_base; - struct access_desc bts_index; - struct access_desc bts_absolute_maximum; - struct access_desc bts_interrupt_threshold; - /* the BTS configuration */ - unsigned char sizeof_bts; - struct access_desc from_ip; - struct access_desc to_ip; - /* BTS variants used to store additional information like - timestamps */ - struct access_desc info_type; - struct access_desc info_data; - unsigned long debugctl_mask; -}; +static spinlock_t ds_lock = __SPIN_LOCK_UNLOCKED(ds_lock); /* - * The global configuration used by the below accessor functions + * Validate that the current task is allowed to access the BTS/PEBS + * buffer of the parameter task. + * + * Returns 0, if access is granted; -Eerrno, otherwise. */ -static struct ds_configuration ds_cfg; +static inline int ds_validate_access(struct ds_context *context, + enum ds_qualifier qual) +{ + if (!context) + return -EPERM; + + if (context->owner[qual] == current) + return 0; + + return -EPERM; +} + /* - * Accessor functions for some DS and BTS fields using the above - * global ptrace_bts_cfg. + * We either support (system-wide) per-cpu or per-thread allocation. + * We distinguish the two based on the task_struct pointer, where a + * NULL pointer indicates per-cpu allocation for the current cpu. + * + * Allocations are use-counted. As soon as resources are allocated, + * further allocations must be of the same type (per-cpu or + * per-thread). We model this by counting allocations (i.e. the number + * of tracers of a certain type) for one type negatively: + * =0 no tracers + * >0 number of per-thread tracers + * <0 number of per-cpu tracers + * + * The below functions to get and put tracers and to check the + * allocation type require the ds_lock to be held by the caller. + * + * Tracers essentially gives the number of ds contexts for a certain + * type of allocation. */ -static inline unsigned long get_bts_buffer_base(char *base) +static long tracers; + +static inline void get_tracer(struct task_struct *task) { - return *(unsigned long *)(base + ds_cfg.bts_buffer_base.offset); + tracers += (task ? 1 : -1); } -static inline void set_bts_buffer_base(char *base, unsigned long value) + +static inline void put_tracer(struct task_struct *task) { - (*(unsigned long *)(base + ds_cfg.bts_buffer_base.offset)) = value; + tracers -= (task ? 1 : -1); } -static inline unsigned long get_bts_index(char *base) + +static inline int check_tracer(struct task_struct *task) { - return *(unsigned long *)(base + ds_cfg.bts_index.offset); + return (task ? (tracers >= 0) : (tracers <= 0)); } -static inline void set_bts_index(char *base, unsigned long value) + + +/* + * The DS context is either attached to a thread or to a cpu: + * - in the former case, the thread_struct contains a pointer to the + * attached context. + * - in the latter case, we use a static array of per-cpu context + * pointers. + * + * Contexts are use-counted. They are allocated on first access and + * deallocated when the last user puts the context. + * + * We distinguish between an allocating and a non-allocating get of a + * context: + * - the allocating get is used for requesting BTS/PEBS resources. It + * requires the caller to hold the global ds_lock. + * - the non-allocating get is used for all other cases. A + * non-existing context indicates an error. It acquires and releases + * the ds_lock itself for obtaining the context. + * + * A context and its DS configuration are allocated and deallocated + * together. A context always has a DS configuration of the + * appropriate size. + */ +static DEFINE_PER_CPU(struct ds_context *, system_context); + +#define this_system_context per_cpu(system_context, smp_processor_id()) + +/* + * Returns the pointer to the parameter task's context or to the + * system-wide context, if task is NULL. + * + * Increases the use count of the returned context, if not NULL. + */ +static inline struct ds_context *ds_get_context(struct task_struct *task) { - (*(unsigned long *)(base + ds_cfg.bts_index.offset)) = value; + struct ds_context *context; + + spin_lock(&ds_lock); + + context = (task ? task->thread.ds_ctx : this_system_context); + if (context) + context->count++; + + spin_unlock(&ds_lock); + + return context; } -static inline unsigned long get_bts_absolute_maximum(char *base) + +/* + * Same as ds_get_context, but allocates the context and it's DS + * structure, if necessary; returns NULL; if out of memory. + * + * pre: requires ds_lock to be held + */ +static inline struct ds_context *ds_alloc_context(struct task_struct *task) { - return *(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset); + struct ds_context **p_context = + (task ? &task->thread.ds_ctx : &this_system_context); + struct ds_context *context = *p_context; + + if (!context) { + context = kzalloc(sizeof(*context), GFP_KERNEL); + + if (!context) + return NULL; + + context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); + if (!context->ds) { + kfree(context); + return NULL; + } + + *p_context = context; + + context->this = p_context; + context->task = task; + + if (task) + set_tsk_thread_flag(task, TIF_DS_AREA_MSR); + + if (!task || (task == current)) + wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0); + + get_tracer(task); + } + + context->count++; + + return context; } -static inline void set_bts_absolute_maximum(char *base, unsigned long value) + +/* + * Decreases the use count of the parameter context, if not NULL. + * Deallocates the context, if the use count reaches zero. + */ +static inline void ds_put_context(struct ds_context *context) { - (*(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset)) = value; + if (!context) + return; + + spin_lock(&ds_lock); + + if (--context->count) + goto out; + + *(context->this) = NULL; + + if (context->task) + clear_tsk_thread_flag(context->task, TIF_DS_AREA_MSR); + + if (!context->task || (context->task == current)) + wrmsrl(MSR_IA32_DS_AREA, 0); + + put_tracer(context->task); + + /* free any leftover buffers from tracers that did not + * deallocate them properly. */ + kfree(context->buffer[ds_bts]); + kfree(context->buffer[ds_pebs]); + kfree(context->ds); + kfree(context); + out: + spin_unlock(&ds_lock); } -static inline unsigned long get_bts_interrupt_threshold(char *base) + + +/* + * Handle a buffer overflow + * + * task: the task whose buffers are overflowing; + * NULL for a buffer overflow on the current cpu + * context: the ds context + * qual: the buffer type + */ +static void ds_overflow(struct task_struct *task, struct ds_context *context, + enum ds_qualifier qual) { - return *(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset); + if (!context) + return; + + if (context->callback[qual]) + (*context->callback[qual])(task); + + /* todo: do some more overflow handling */ } -static inline void set_bts_interrupt_threshold(char *base, unsigned long value) + + +/* + * Allocate a non-pageable buffer of the parameter size. + * Checks the memory and the locked memory rlimit. + * + * Returns the buffer, if successful; + * NULL, if out of memory or rlimit exceeded. + * + * size: the requested buffer size in bytes + * pages (out): if not NULL, contains the number of pages reserved + */ +static inline void *ds_allocate_buffer(size_t size, unsigned int *pages) { - (*(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset)) = value; + unsigned long rlim, vm, pgsz; + void *buffer; + + pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT; + + rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; + vm = current->mm->total_vm + pgsz; + if (rlim < vm) + return NULL; + + rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; + vm = current->mm->locked_vm + pgsz; + if (rlim < vm) + return NULL; + + buffer = kzalloc(size, GFP_KERNEL); + if (!buffer) + return NULL; + + current->mm->total_vm += pgsz; + current->mm->locked_vm += pgsz; + + if (pages) + *pages = pgsz; + + return buffer; } -static inline unsigned long get_from_ip(char *base) + +static int ds_request(struct task_struct *task, void *base, size_t size, + ds_ovfl_callback_t ovfl, enum ds_qualifier qual) { - return *(unsigned long *)(base + ds_cfg.from_ip.offset); + struct ds_context *context; + unsigned long buffer, adj; + const unsigned long alignment = (1 << 3); + int error = 0; + + if (!ds_cfg.sizeof_ds) + return -EOPNOTSUPP; + + /* we require some space to do alignment adjustments below */ + if (size < (alignment + ds_cfg.sizeof_rec[qual])) + return -EINVAL; + + /* buffer overflow notification is not yet implemented */ + if (ovfl) + return -EOPNOTSUPP; + + + spin_lock(&ds_lock); + + if (!check_tracer(task)) + return -EPERM; + + error = -ENOMEM; + context = ds_alloc_context(task); + if (!context) + goto out_unlock; + + error = -EALREADY; + if (context->owner[qual] == current) + goto out_unlock; + error = -EPERM; + if (context->owner[qual] != NULL) + goto out_unlock; + context->owner[qual] = current; + + spin_unlock(&ds_lock); + + + error = -ENOMEM; + if (!base) { + base = ds_allocate_buffer(size, &context->pages[qual]); + if (!base) + goto out_release; + + context->buffer[qual] = base; + } + error = 0; + + context->callback[qual] = ovfl; + + /* adjust the buffer address and size to meet alignment + * constraints: + * - buffer is double-word aligned + * - size is multiple of record size + * + * We checked the size at the very beginning; we have enough + * space to do the adjustment. + */ + buffer = (unsigned long)base; + + adj = ALIGN(buffer, alignment) - buffer; + buffer += adj; + size -= adj; + + size /= ds_cfg.sizeof_rec[qual]; + size *= ds_cfg.sizeof_rec[qual]; + + ds_set(context->ds, qual, ds_buffer_base, buffer); + ds_set(context->ds, qual, ds_index, buffer); + ds_set(context->ds, qual, ds_absolute_maximum, buffer + size); + + if (ovfl) { + /* todo: select a suitable interrupt threshold */ + } else + ds_set(context->ds, qual, + ds_interrupt_threshold, buffer + size + 1); + + /* we keep the context until ds_release */ + return error; + + out_release: + context->owner[qual] = NULL; + ds_put_context(context); + return error; + + out_unlock: + spin_unlock(&ds_lock); + ds_put_context(context); + return error; } -static inline void set_from_ip(char *base, unsigned long value) + +int ds_request_bts(struct task_struct *task, void *base, size_t size, + ds_ovfl_callback_t ovfl) { - (*(unsigned long *)(base + ds_cfg.from_ip.offset)) = value; + return ds_request(task, base, size, ovfl, ds_bts); } -static inline unsigned long get_to_ip(char *base) + +int ds_request_pebs(struct task_struct *task, void *base, size_t size, + ds_ovfl_callback_t ovfl) { - return *(unsigned long *)(base + ds_cfg.to_ip.offset); + return ds_request(task, base, size, ovfl, ds_pebs); } -static inline void set_to_ip(char *base, unsigned long value) + +static int ds_release(struct task_struct *task, enum ds_qualifier qual) { - (*(unsigned long *)(base + ds_cfg.to_ip.offset)) = value; + struct ds_context *context; + int error; + + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + + kfree(context->buffer[qual]); + context->buffer[qual] = NULL; + + current->mm->total_vm -= context->pages[qual]; + current->mm->locked_vm -= context->pages[qual]; + context->pages[qual] = 0; + context->owner[qual] = NULL; + + /* + * we put the context twice: + * once for the ds_get_context + * once for the corresponding ds_request + */ + ds_put_context(context); + out: + ds_put_context(context); + return error; } -static inline unsigned char get_info_type(char *base) + +int ds_release_bts(struct task_struct *task) { - return *(unsigned char *)(base + ds_cfg.info_type.offset); + return ds_release(task, ds_bts); } -static inline void set_info_type(char *base, unsigned char value) + +int ds_release_pebs(struct task_struct *task) { - (*(unsigned char *)(base + ds_cfg.info_type.offset)) = value; + return ds_release(task, ds_pebs); } -static inline unsigned long get_info_data(char *base) + +static int ds_get_index(struct task_struct *task, size_t *pos, + enum ds_qualifier qual) { - return *(unsigned long *)(base + ds_cfg.info_data.offset); + struct ds_context *context; + unsigned long base, index; + int error; + + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + + base = ds_get(context->ds, qual, ds_buffer_base); + index = ds_get(context->ds, qual, ds_index); + + error = ((index - base) / ds_cfg.sizeof_rec[qual]); + if (pos) + *pos = error; + out: + ds_put_context(context); + return error; } -static inline void set_info_data(char *base, unsigned long value) + +int ds_get_bts_index(struct task_struct *task, size_t *pos) { - (*(unsigned long *)(base + ds_cfg.info_data.offset)) = value; + return ds_get_index(task, pos, ds_bts); } +int ds_get_pebs_index(struct task_struct *task, size_t *pos) +{ + return ds_get_index(task, pos, ds_pebs); +} -int ds_allocate(void **dsp, size_t bts_size_in_bytes) +static int ds_get_end(struct task_struct *task, size_t *pos, + enum ds_qualifier qual) { - size_t bts_size_in_records; - unsigned long bts; - void *ds; + struct ds_context *context; + unsigned long base, end; + int error; + + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + + base = ds_get(context->ds, qual, ds_buffer_base); + end = ds_get(context->ds, qual, ds_absolute_maximum); + + error = ((end - base) / ds_cfg.sizeof_rec[qual]); + if (pos) + *pos = error; + out: + ds_put_context(context); + return error; +} - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; +int ds_get_bts_end(struct task_struct *task, size_t *pos) +{ + return ds_get_end(task, pos, ds_bts); +} - if (bts_size_in_bytes < 0) - return -EINVAL; +int ds_get_pebs_end(struct task_struct *task, size_t *pos) +{ + return ds_get_end(task, pos, ds_pebs); +} - bts_size_in_records = - bts_size_in_bytes / ds_cfg.sizeof_bts; - bts_size_in_bytes = - bts_size_in_records * ds_cfg.sizeof_bts; +static int ds_access(struct task_struct *task, size_t index, + const void **record, enum ds_qualifier qual) +{ + struct ds_context *context; + unsigned long base, idx; + int error; - if (bts_size_in_bytes <= 0) + if (!record) return -EINVAL; - bts = (unsigned long)kzalloc(bts_size_in_bytes, GFP_KERNEL); - - if (!bts) - return -ENOMEM; + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; - ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); + base = ds_get(context->ds, qual, ds_buffer_base); + idx = base + (index * ds_cfg.sizeof_rec[qual]); - if (!ds) { - kfree((void *)bts); - return -ENOMEM; - } - - set_bts_buffer_base(ds, bts); - set_bts_index(ds, bts); - set_bts_absolute_maximum(ds, bts + bts_size_in_bytes); - set_bts_interrupt_threshold(ds, bts + bts_size_in_bytes + 1); + error = -EINVAL; + if (idx > ds_get(context->ds, qual, ds_absolute_maximum)) + goto out; - *dsp = ds; - return 0; + *record = (const void *)idx; + error = ds_cfg.sizeof_rec[qual]; + out: + ds_put_context(context); + return error; } -int ds_free(void **dsp) +int ds_access_bts(struct task_struct *task, size_t index, const void **record) { - if (*dsp) { - kfree((void *)get_bts_buffer_base(*dsp)); - kfree(*dsp); - *dsp = NULL; - } - return 0; + return ds_access(task, index, record, ds_bts); } -int ds_get_bts_size(void *ds) +int ds_access_pebs(struct task_struct *task, size_t index, const void **record) { - int size_in_bytes; - - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; - - if (!ds) - return 0; - - size_in_bytes = - get_bts_absolute_maximum(ds) - - get_bts_buffer_base(ds); - return size_in_bytes; + return ds_access(task, index, record, ds_pebs); } -int ds_get_bts_end(void *ds) +static int ds_write(struct task_struct *task, const void *record, size_t size, + enum ds_qualifier qual, int force) { - int size_in_bytes = ds_get_bts_size(ds); - - if (size_in_bytes <= 0) - return size_in_bytes; + struct ds_context *context; + int error; - return size_in_bytes / ds_cfg.sizeof_bts; -} + if (!record) + return -EINVAL; -int ds_get_bts_index(void *ds) -{ - int index_offset_in_bytes; + error = -EPERM; + context = ds_get_context(task); + if (!context) + goto out; - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; + if (!force) { + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + } - index_offset_in_bytes = - get_bts_index(ds) - - get_bts_buffer_base(ds); + error = 0; + while (size) { + unsigned long base, index, end, write_end, int_th; + unsigned long write_size, adj_write_size; + + /* + * write as much as possible without producing an + * overflow interrupt. + * + * interrupt_threshold must either be + * - bigger than absolute_maximum or + * - point to a record between buffer_base and absolute_maximum + * + * index points to a valid record. + */ + base = ds_get(context->ds, qual, ds_buffer_base); + index = ds_get(context->ds, qual, ds_index); + end = ds_get(context->ds, qual, ds_absolute_maximum); + int_th = ds_get(context->ds, qual, ds_interrupt_threshold); + + write_end = min(end, int_th); + + /* if we are already beyond the interrupt threshold, + * we fill the entire buffer */ + if (write_end <= index) + write_end = end; + + if (write_end <= index) + goto out; + + write_size = min((unsigned long) size, write_end - index); + memcpy((void *)index, record, write_size); + + record = (const char *)record + write_size; + size -= write_size; + error += write_size; + + adj_write_size = write_size / ds_cfg.sizeof_rec[qual]; + adj_write_size *= ds_cfg.sizeof_rec[qual]; + + /* zero out trailing bytes */ + memset((char *)index + write_size, 0, + adj_write_size - write_size); + index += adj_write_size; + + if (index >= end) + index = base; + ds_set(context->ds, qual, ds_index, index); + + if (index >= int_th) + ds_overflow(task, context, qual); + } - return index_offset_in_bytes / ds_cfg.sizeof_bts; + out: + ds_put_context(context); + return error; } -int ds_set_overflow(void *ds, int method) +int ds_write_bts(struct task_struct *task, const void *record, size_t size) { - switch (method) { - case DS_O_SIGNAL: - return -EOPNOTSUPP; - case DS_O_WRAP: - return 0; - default: - return -EINVAL; - } + return ds_write(task, record, size, ds_bts, /* force = */ 0); } -int ds_get_overflow(void *ds) +int ds_write_pebs(struct task_struct *task, const void *record, size_t size) { - return DS_O_WRAP; + return ds_write(task, record, size, ds_pebs, /* force = */ 0); } -int ds_clear(void *ds) +int ds_unchecked_write_bts(struct task_struct *task, + const void *record, size_t size) { - int bts_size = ds_get_bts_size(ds); - unsigned long bts_base; - - if (bts_size <= 0) - return bts_size; - - bts_base = get_bts_buffer_base(ds); - memset((void *)bts_base, 0, bts_size); - - set_bts_index(ds, bts_base); - return 0; + return ds_write(task, record, size, ds_bts, /* force = */ 1); } -int ds_read_bts(void *ds, int index, struct bts_struct *out) +int ds_unchecked_write_pebs(struct task_struct *task, + const void *record, size_t size) { - void *bts; + return ds_write(task, record, size, ds_pebs, /* force = */ 1); +} - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; +static int ds_reset_or_clear(struct task_struct *task, + enum ds_qualifier qual, int clear) +{ + struct ds_context *context; + unsigned long base, end; + int error; - if (index < 0) - return -EINVAL; + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; - if (index >= ds_get_bts_size(ds)) - return -EINVAL; + base = ds_get(context->ds, qual, ds_buffer_base); + end = ds_get(context->ds, qual, ds_absolute_maximum); - bts = (void *)(get_bts_buffer_base(ds) + (index * ds_cfg.sizeof_bts)); + if (clear) + memset((void *)base, 0, end - base); - memset(out, 0, sizeof(*out)); - if (get_from_ip(bts) == BTS_ESCAPE_ADDRESS) { - out->qualifier = get_info_type(bts); - out->variant.jiffies = get_info_data(bts); - } else { - out->qualifier = BTS_BRANCH; - out->variant.lbr.from_ip = get_from_ip(bts); - out->variant.lbr.to_ip = get_to_ip(bts); - } + ds_set(context->ds, qual, ds_index, base); - return sizeof(*out);; + error = 0; + out: + ds_put_context(context); + return error; } -int ds_write_bts(void *ds, const struct bts_struct *in) +int ds_reset_bts(struct task_struct *task) { - unsigned long bts; - - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; - - if (ds_get_bts_size(ds) <= 0) - return -ENXIO; + return ds_reset_or_clear(task, ds_bts, /* clear = */ 0); +} - bts = get_bts_index(ds); +int ds_reset_pebs(struct task_struct *task) +{ + return ds_reset_or_clear(task, ds_pebs, /* clear = */ 0); +} - memset((void *)bts, 0, ds_cfg.sizeof_bts); - switch (in->qualifier) { - case BTS_INVALID: - break; +int ds_clear_bts(struct task_struct *task) +{ + return ds_reset_or_clear(task, ds_bts, /* clear = */ 1); +} - case BTS_BRANCH: - set_from_ip((void *)bts, in->variant.lbr.from_ip); - set_to_ip((void *)bts, in->variant.lbr.to_ip); - break; +int ds_clear_pebs(struct task_struct *task) +{ + return ds_reset_or_clear(task, ds_pebs, /* clear = */ 1); +} - case BTS_TASK_ARRIVES: - case BTS_TASK_DEPARTS: - set_from_ip((void *)bts, BTS_ESCAPE_ADDRESS); - set_info_type((void *)bts, in->qualifier); - set_info_data((void *)bts, in->variant.jiffies); - break; +int ds_get_pebs_reset(struct task_struct *task, u64 *value) +{ + struct ds_context *context; + int error; - default: + if (!value) return -EINVAL; - } - bts = bts + ds_cfg.sizeof_bts; - if (bts >= get_bts_absolute_maximum(ds)) - bts = get_bts_buffer_base(ds); - set_bts_index(ds, bts); + context = ds_get_context(task); + error = ds_validate_access(context, ds_pebs); + if (error < 0) + goto out; - return ds_cfg.sizeof_bts; + *value = *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8)); + + error = 0; + out: + ds_put_context(context); + return error; } -unsigned long ds_debugctl_mask(void) +int ds_set_pebs_reset(struct task_struct *task, u64 value) { - return ds_cfg.debugctl_mask; -} + struct ds_context *context; + int error; -#ifdef __i386__ -static const struct ds_configuration ds_cfg_netburst = { - .sizeof_ds = 9 * 4, - .bts_buffer_base = { 0, 4 }, - .bts_index = { 4, 4 }, - .bts_absolute_maximum = { 8, 4 }, - .bts_interrupt_threshold = { 12, 4 }, - .sizeof_bts = 3 * 4, - .from_ip = { 0, 4 }, - .to_ip = { 4, 4 }, - .info_type = { 4, 1 }, - .info_data = { 8, 4 }, - .debugctl_mask = (1<<2)|(1<<3) -}; + context = ds_get_context(task); + error = ds_validate_access(context, ds_pebs); + if (error < 0) + goto out; -static const struct ds_configuration ds_cfg_pentium_m = { - .sizeof_ds = 9 * 4, - .bts_buffer_base = { 0, 4 }, - .bts_index = { 4, 4 }, - .bts_absolute_maximum = { 8, 4 }, - .bts_interrupt_threshold = { 12, 4 }, - .sizeof_bts = 3 * 4, - .from_ip = { 0, 4 }, - .to_ip = { 4, 4 }, - .info_type = { 4, 1 }, - .info_data = { 8, 4 }, - .debugctl_mask = (1<<6)|(1<<7) + *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8)) = value; + + error = 0; + out: + ds_put_context(context); + return error; +} + +static const struct ds_configuration ds_cfg_var = { + .sizeof_ds = sizeof(long) * 12, + .sizeof_field = sizeof(long), + .sizeof_rec[ds_bts] = sizeof(long) * 3, + .sizeof_rec[ds_pebs] = sizeof(long) * 10 }; -#endif /* _i386_ */ - -static const struct ds_configuration ds_cfg_core2 = { - .sizeof_ds = 9 * 8, - .bts_buffer_base = { 0, 8 }, - .bts_index = { 8, 8 }, - .bts_absolute_maximum = { 16, 8 }, - .bts_interrupt_threshold = { 24, 8 }, - .sizeof_bts = 3 * 8, - .from_ip = { 0, 8 }, - .to_ip = { 8, 8 }, - .info_type = { 8, 1 }, - .info_data = { 16, 8 }, - .debugctl_mask = (1<<6)|(1<<7)|(1<<9) +static const struct ds_configuration ds_cfg_64 = { + .sizeof_ds = 8 * 12, + .sizeof_field = 8, + .sizeof_rec[ds_bts] = 8 * 3, + .sizeof_rec[ds_pebs] = 8 * 10 }; static inline void @@ -429,14 +821,13 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) switch (c->x86) { case 0x6: switch (c->x86_model) { -#ifdef __i386__ case 0xD: case 0xE: /* Pentium M */ - ds_configure(&ds_cfg_pentium_m); + ds_configure(&ds_cfg_var); break; -#endif /* _i386_ */ case 0xF: /* Core2 */ - ds_configure(&ds_cfg_core2); + case 0x1C: /* Atom */ + ds_configure(&ds_cfg_64); break; default: /* sorry, don't know about them */ @@ -445,13 +836,11 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) break; case 0xF: switch (c->x86_model) { -#ifdef __i386__ case 0x0: case 0x1: case 0x2: /* Netburst */ - ds_configure(&ds_cfg_netburst); + ds_configure(&ds_cfg_var); break; -#endif /* _i386_ */ default: /* sorry, don't know about them */ break; @@ -462,3 +851,14 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) break; } } + +void ds_free(struct ds_context *context) +{ + /* This is called when the task owning the parameter context + * is dying. There should not be any user of that context left + * to disturb us, anymore. */ + unsigned long leftovers = context->count; + while (leftovers--) + ds_put_context(context); +} +#endif /* CONFIG_X86_DS */ diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c new file mode 100644 index 00000000000..78e642feac3 --- /dev/null +++ b/arch/x86/kernel/e820.c @@ -0,0 +1,1391 @@ +/* + * Handle the memory map. + * The functions here do the job until bootmem takes over. + * + * Getting sanitize_e820_map() in sync with i386 version by applying change: + * - Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach <xela@slit.de>, December 2002. + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/kexec.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/pfn.h> +#include <linux/suspend.h> +#include <linux/firmware-map.h> + +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/e820.h> +#include <asm/proto.h> +#include <asm/setup.h> +#include <asm/trampoline.h> + +/* + * The e820 map is the map that gets modified e.g. with command line parameters + * and that is also registered with modifications in the kernel resource tree + * with the iomem_resource as parent. + * + * The e820_saved is directly saved after the BIOS-provided memory map is + * copied. It doesn't get modified afterwards. It's registered for the + * /sys/firmware/memmap interface. + * + * That memory map is not modified and is used as base for kexec. The kexec'd + * kernel should get the same memory map as the firmware provides. Then the + * user can e.g. boot the original kernel with mem=1G while still booting the + * next kernel with full memory. + */ +struct e820map e820; +struct e820map e820_saved; + +/* For PCI or other memory-mapped resources */ +unsigned long pci_mem_start = 0xaeedbabe; +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_mem_start); +#endif + +/* + * This function checks if any part of the range <start,end> is mapped + * with type. + */ +int +e820_any_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(e820_any_mapped); + +/* + * This function checks if the entire range <start,end> is mapped with type. + * + * Note: this function only works correct if the e820 table is sorted and + * not-overlapping, which is the case + */ +int __init e820_all_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + /* is the region (part) in overlap with the current region ?*/ + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + + /* if the region is at the beginning of <start,end> we move + * start to the end of the region since it's ok until there + */ + if (ei->addr <= start) + start = ei->addr + ei->size; + /* + * if start is now at or beyond end, we're done, full + * coverage + */ + if (start >= end) + return 1; + } + return 0; +} + +/* + * Add a memory region to the kernel e820 map. + */ +void __init e820_add_region(u64 start, u64 size, int type) +{ + int x = e820.nr_map; + + if (x == ARRAY_SIZE(e820.map)) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; +} + +void __init e820_print_map(char *who) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + printk(KERN_INFO " %s: %016Lx - %016Lx ", who, + (unsigned long long) e820.map[i].addr, + (unsigned long long) + (e820.map[i].addr + e820.map[i].size)); + switch (e820.map[i].type) { + case E820_RAM: + case E820_RESERVED_KERN: + printk(KERN_CONT "(usable)\n"); + break; + case E820_RESERVED: + printk(KERN_CONT "(reserved)\n"); + break; + case E820_ACPI: + printk(KERN_CONT "(ACPI data)\n"); + break; + case E820_NVS: + printk(KERN_CONT "(ACPI NVS)\n"); + break; + case E820_UNUSABLE: + printk("(unusable)\n"); + break; + default: + printk(KERN_CONT "type %u\n", e820.map[i].type); + break; + } + } +} + +/* + * Sanitize the BIOS e820 map. + * + * Some e820 responses include overlapping entries. The following + * replaces the original e820 map with a new one, removing overlaps, + * and resolving conflicting memory types in favor of highest + * numbered type. + * + * The input parameter biosmap points to an array of 'struct + * e820entry' which on entry has elements in the range [0, *pnr_map) + * valid, and which has space for up to max_nr_map entries. + * On return, the resulting sanitized e820 map entries will be in + * overwritten in the same location, starting at biosmap. + * + * The integer pointed to by pnr_map must be valid on entry (the + * current number of valid entries located at biosmap) and will + * be updated on return, with the new number of valid entries + * (something no more than max_nr_map.) + * + * The return value from sanitize_e820_map() is zero if it + * successfully 'sanitized' the map entries passed in, and is -1 + * if it did nothing, which can happen if either of (1) it was + * only passed one map entry, or (2) any of the input map entries + * were invalid (start + size < start, meaning that the size was + * so big the described memory range wrapped around through zero.) + * + * Visually we're performing the following + * (1,2,3,4 = memory types)... + * + * Sample memory map (w/overlaps): + * ____22__________________ + * ______________________4_ + * ____1111________________ + * _44_____________________ + * 11111111________________ + * ____________________33__ + * ___________44___________ + * __________33333_________ + * ______________22________ + * ___________________2222_ + * _________111111111______ + * _____________________11_ + * _________________4______ + * + * Sanitized equivalent (no overlap): + * 1_______________________ + * _44_____________________ + * ___1____________________ + * ____22__________________ + * ______11________________ + * _________1______________ + * __________3_____________ + * ___________44___________ + * _____________33_________ + * _______________2________ + * ________________1_______ + * _________________4______ + * ___________________2____ + * ____________________33__ + * ______________________4_ + */ + +int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, + int *pnr_map) +{ + struct change_member { + struct e820entry *pbios; /* pointer to original bios entry */ + unsigned long long addr; /* address for this change point */ + }; + static struct change_member change_point_list[2*E820_X_MAX] __initdata; + static struct change_member *change_point[2*E820_X_MAX] __initdata; + static struct e820entry *overlap_list[E820_X_MAX] __initdata; + static struct e820entry new_bios[E820_X_MAX] __initdata; + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_bios_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) + return -1; + + old_nr = *pnr_map; + BUG_ON(old_nr > max_nr_map); + + /* bail out if we find any unreasonable addresses in bios map */ + for (i = 0; i < old_nr; i++) + if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) + return -1; + + /* create pointers for initial change-point information (for sorting) */ + for (i = 0; i < 2 * old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i = 0; i < old_nr; i++) { + if (biosmap[i].size != 0) { + change_point[chgidx]->addr = biosmap[i].addr; + change_point[chgidx++]->pbios = &biosmap[i]; + change_point[chgidx]->addr = biosmap[i].addr + + biosmap[i].size; + change_point[chgidx++]->pbios = &biosmap[i]; + } + } + chg_nr = chgidx; + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i = 1; i < chg_nr; i++) { + unsigned long long curaddr, lastaddr; + unsigned long long curpbaddr, lastpbaddr; + + curaddr = change_point[i]->addr; + lastaddr = change_point[i - 1]->addr; + curpbaddr = change_point[i]->pbios->addr; + lastpbaddr = change_point[i - 1]->pbios->addr; + + /* + * swap entries, when: + * + * curaddr > lastaddr or + * curaddr == lastaddr and curaddr == curpbaddr and + * lastaddr != lastpbaddr + */ + if (curaddr < lastaddr || + (curaddr == lastaddr && curaddr == curpbaddr && + lastaddr != lastpbaddr)) { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing = 1; + } + } + } + + /* create a new bios memory map, removing overlaps */ + overlap_entries = 0; /* number of entries in the overlap table */ + new_bios_entry = 0; /* index for creating new bios map entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + + /* loop through change-points, determining affect on the new bios map */ + for (chgidx = 0; chgidx < chg_nr; chgidx++) { + /* keep track of all overlapping bios entries */ + if (change_point[chgidx]->addr == + change_point[chgidx]->pbios->addr) { + /* + * add map entry to overlap list (> 1 entry + * implies an overlap) + */ + overlap_list[overlap_entries++] = + change_point[chgidx]->pbios; + } else { + /* + * remove entry from list (order independent, + * so swap with last) + */ + for (i = 0; i < overlap_entries; i++) { + if (overlap_list[i] == + change_point[chgidx]->pbios) + overlap_list[i] = + overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* + * if there are overlapping entries, decide which + * "type" to use (larger value takes precedence -- + * 1=usable, 2,3,4,4+=unusable) + */ + current_type = 0; + for (i = 0; i < overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* + * continue building up new bios map based on this + * information + */ + if (current_type != last_type) { + if (last_type != 0) { + new_bios[new_bios_entry].size = + change_point[chgidx]->addr - last_addr; + /* + * move forward only if the new size + * was non-zero + */ + if (new_bios[new_bios_entry].size != 0) + /* + * no more space left for new + * bios entries ? + */ + if (++new_bios_entry >= max_nr_map) + break; + } + if (current_type != 0) { + new_bios[new_bios_entry].addr = + change_point[chgidx]->addr; + new_bios[new_bios_entry].type = current_type; + last_addr = change_point[chgidx]->addr; + } + last_type = current_type; + } + } + /* retain count for new bios entries */ + new_nr = new_bios_entry; + + /* copy new bios mapping into original location */ + memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); + *pnr_map = new_nr; + + return 0; +} + +static int __init __append_e820_map(struct e820entry *biosmap, int nr_map) +{ + while (nr_map) { + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + e820_add_region(start, size, type); + + biosmap++; + nr_map--; + } + return 0; +} + +/* + * Copy the BIOS e820 map into a safe place. + * + * Sanity-check it while we're at it.. + * + * If we're lucky and live on a modern system, the setup code + * will have given us a memory map that we can use to properly + * set up memory. If we aren't, we'll fake a memory map. + */ +static int __init append_e820_map(struct e820entry *biosmap, int nr_map) +{ + /* Only one memory region (or negative)? Ignore it */ + if (nr_map < 2) + return -1; + + return __append_e820_map(biosmap, nr_map); +} + +static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, + u64 size, unsigned old_type, + unsigned new_type) +{ + int i; + u64 real_updated_size = 0; + + BUG_ON(old_type == new_type); + + if (size > (ULLONG_MAX - start)) + size = ULLONG_MAX - start; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820x->map[i]; + u64 final_start, final_end; + if (ei->type != old_type) + continue; + /* totally covered? */ + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { + ei->type = new_type; + real_updated_size += ei->size; + continue; + } + /* partially covered */ + final_start = max(start, ei->addr); + final_end = min(start + size, ei->addr + ei->size); + if (final_start >= final_end) + continue; + e820_add_region(final_start, final_end - final_start, + new_type); + real_updated_size += final_end - final_start; + + ei->size -= final_end - final_start; + if (ei->addr < final_start) + continue; + ei->addr = final_end; + } + return real_updated_size; +} + +u64 __init e820_update_range(u64 start, u64 size, unsigned old_type, + unsigned new_type) +{ + return e820_update_range_map(&e820, start, size, old_type, new_type); +} + +static u64 __init e820_update_range_saved(u64 start, u64 size, + unsigned old_type, unsigned new_type) +{ + return e820_update_range_map(&e820_saved, start, size, old_type, + new_type); +} + +/* make e820 not cover the range */ +u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type, + int checktype) +{ + int i; + u64 real_removed_size = 0; + + if (size > (ULLONG_MAX - start)) + size = ULLONG_MAX - start; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 final_start, final_end; + + if (checktype && ei->type != old_type) + continue; + /* totally covered? */ + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { + real_removed_size += ei->size; + memset(ei, 0, sizeof(struct e820entry)); + continue; + } + /* partially covered */ + final_start = max(start, ei->addr); + final_end = min(start + size, ei->addr + ei->size); + if (final_start >= final_end) + continue; + real_removed_size += final_end - final_start; + + ei->size -= final_end - final_start; + if (ei->addr < final_start) + continue; + ei->addr = final_end; + } + return real_removed_size; +} + +void __init update_e820(void) +{ + int nr_map; + + nr_map = e820.nr_map; + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) + return; + e820.nr_map = nr_map; + printk(KERN_INFO "modified physical RAM map:\n"); + e820_print_map("modified"); +} +static void __init update_e820_saved(void) +{ + int nr_map; + + nr_map = e820_saved.nr_map; + if (sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map), &nr_map)) + return; + e820_saved.nr_map = nr_map; +} +#define MAX_GAP_END 0x100000000ull +/* + * Search for a gap in the e820 memory space from start_addr to end_addr. + */ +__init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize, + unsigned long start_addr, unsigned long long end_addr) +{ + unsigned long long last; + int i = e820.nr_map; + int found = 0; + + last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END; + + while (--i >= 0) { + unsigned long long start = e820.map[i].addr; + unsigned long long end = start + e820.map[i].size; + + if (end < start_addr) + continue; + + /* + * Since "last" is at most 4GB, we know we'll + * fit in 32 bits if this condition is true + */ + if (last > end) { + unsigned long gap = last - end; + + if (gap >= *gapsize) { + *gapsize = gap; + *gapstart = end; + found = 1; + } + } + if (start < last) + last = start; + } + return found; +} + +/* + * Search for the biggest gap in the low 32 bits of the e820 + * memory space. We pass this space to PCI to assign MMIO resources + * for hotplug or unconfigured devices in. + * Hopefully the BIOS let enough space left. + */ +__init void e820_setup_gap(void) +{ + unsigned long gapstart, gapsize, round; + int found; + + gapstart = 0x10000000; + gapsize = 0x400000; + found = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END); + +#ifdef CONFIG_X86_64 + if (!found) { + gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024; + printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " + "address range\n" + KERN_ERR "PCI: Unassigned devices with 32bit resource " + "registers may break!\n"); + } +#endif + + /* + * See how much we want to round up: start off with + * rounding to the next 1MB area. + */ + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; + + printk(KERN_INFO + "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", + pci_mem_start, gapstart, gapsize); +} + +/** + * Because of the size limitation of struct boot_params, only first + * 128 E820 memory entries are passed to kernel via + * boot_params.e820_map, others are passed via SETUP_E820_EXT node of + * linked list of struct setup_data, which is parsed here. + */ +void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data) +{ + u32 map_len; + int entries; + struct e820entry *extmap; + + entries = sdata->len / sizeof(struct e820entry); + map_len = sdata->len + sizeof(struct setup_data); + if (map_len > PAGE_SIZE) + sdata = early_ioremap(pa_data, map_len); + extmap = (struct e820entry *)(sdata->data); + __append_e820_map(extmap, entries); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + if (map_len > PAGE_SIZE) + early_iounmap(sdata, map_len); + printk(KERN_INFO "extended physical RAM map:\n"); + e820_print_map("extended"); +} + +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +/** + * Find the ranges of physical addresses that do not correspond to + * e820 RAM areas and mark the corresponding pages as nosave for + * hibernation (32 bit) or software suspend and suspend to RAM (64 bit). + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(unsigned long limit_pfn) +{ + int i; + unsigned long pfn; + + pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (pfn < PFN_UP(ei->addr)) + register_nosave_region(pfn, PFN_UP(ei->addr)); + + pfn = PFN_DOWN(ei->addr + ei->size); + if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN) + register_nosave_region(PFN_UP(ei->addr), pfn); + + if (pfn >= limit_pfn) + break; + } +} +#endif + +/* + * Early reserved memory areas. + */ +#define MAX_EARLY_RES 20 + +struct early_res { + u64 start, end; + char name[16]; + char overlap_ok; +}; +static struct early_res early_res[MAX_EARLY_RES] __initdata = { + { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE) + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, +#endif +#if defined(CONFIG_X86_32) && defined(CONFIG_SMP) + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" }, + /* + * Has to be in very low memory so we can execute + * real-mode AP code. + */ + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" }, +#endif + {} +}; + +static int __init find_overlapped_early(u64 start, u64 end) +{ + int i; + struct early_res *r; + + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (end > r->start && start < r->end) + break; + } + + return i; +} + +/* + * Drop the i-th range from the early reservation map, + * by copying any higher ranges down one over it, and + * clearing what had been the last slot. + */ +static void __init drop_range(int i) +{ + int j; + + for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) + ; + + memmove(&early_res[i], &early_res[i + 1], + (j - 1 - i) * sizeof(struct early_res)); + + early_res[j - 1].end = 0; +} + +/* + * Split any existing ranges that: + * 1) are marked 'overlap_ok', and + * 2) overlap with the stated range [start, end) + * into whatever portion (if any) of the existing range is entirely + * below or entirely above the stated range. Drop the portion + * of the existing range that overlaps with the stated range, + * which will allow the caller of this routine to then add that + * stated range without conflicting with any existing range. + */ +static void __init drop_overlaps_that_are_ok(u64 start, u64 end) +{ + int i; + struct early_res *r; + u64 lower_start, lower_end; + u64 upper_start, upper_end; + char name[16]; + + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + + /* Continue past non-overlapping ranges */ + if (end <= r->start || start >= r->end) + continue; + + /* + * Leave non-ok overlaps as is; let caller + * panic "Overlapping early reservations" + * when it hits this overlap. + */ + if (!r->overlap_ok) + return; + + /* + * We have an ok overlap. We will drop it from the early + * reservation map, and add back in any non-overlapping + * portions (lower or upper) as separate, overlap_ok, + * non-overlapping ranges. + */ + + /* 1. Note any non-overlapping (lower or upper) ranges. */ + strncpy(name, r->name, sizeof(name) - 1); + + lower_start = lower_end = 0; + upper_start = upper_end = 0; + if (r->start < start) { + lower_start = r->start; + lower_end = start; + } + if (r->end > end) { + upper_start = end; + upper_end = r->end; + } + + /* 2. Drop the original ok overlapping range */ + drop_range(i); + + i--; /* resume for-loop on copied down entry */ + + /* 3. Add back in any non-overlapping ranges. */ + if (lower_end) + reserve_early_overlap_ok(lower_start, lower_end, name); + if (upper_end) + reserve_early_overlap_ok(upper_start, upper_end, name); + } +} + +static void __init __reserve_early(u64 start, u64 end, char *name, + int overlap_ok) +{ + int i; + struct early_res *r; + + i = find_overlapped_early(start, end); + if (i >= MAX_EARLY_RES) + panic("Too many early reservations"); + r = &early_res[i]; + if (r->end) + panic("Overlapping early reservations " + "%llx-%llx %s to %llx-%llx %s\n", + start, end - 1, name?name:"", r->start, + r->end - 1, r->name); + r->start = start; + r->end = end; + r->overlap_ok = overlap_ok; + if (name) + strncpy(r->name, name, sizeof(r->name) - 1); +} + +/* + * A few early reservtations come here. + * + * The 'overlap_ok' in the name of this routine does -not- mean it + * is ok for these reservations to overlap an earlier reservation. + * Rather it means that it is ok for subsequent reservations to + * overlap this one. + * + * Use this entry point to reserve early ranges when you are doing + * so out of "Paranoia", reserving perhaps more memory than you need, + * just in case, and don't mind a subsequent overlapping reservation + * that is known to be needed. + * + * The drop_overlaps_that_are_ok() call here isn't really needed. + * It would be needed if we had two colliding 'overlap_ok' + * reservations, so that the second such would not panic on the + * overlap with the first. We don't have any such as of this + * writing, but might as well tolerate such if it happens in + * the future. + */ +void __init reserve_early_overlap_ok(u64 start, u64 end, char *name) +{ + drop_overlaps_that_are_ok(start, end); + __reserve_early(start, end, name, 1); +} + +/* + * Most early reservations come here. + * + * We first have drop_overlaps_that_are_ok() drop any pre-existing + * 'overlap_ok' ranges, so that we can then reserve this memory + * range without risk of panic'ing on an overlapping overlap_ok + * early reservation. + */ +void __init reserve_early(u64 start, u64 end, char *name) +{ + drop_overlaps_that_are_ok(start, end); + __reserve_early(start, end, name, 0); +} + +void __init free_early(u64 start, u64 end) +{ + struct early_res *r; + int i; + + i = find_overlapped_early(start, end); + r = &early_res[i]; + if (i >= MAX_EARLY_RES || r->end != end || r->start != start) + panic("free_early on not reserved area: %llx-%llx!", + start, end - 1); + + drop_range(i); +} + +void __init early_res_to_bootmem(u64 start, u64 end) +{ + int i, count; + u64 final_start, final_end; + + count = 0; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) + count++; + + printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n", + count, start, end); + for (i = 0; i < count; i++) { + struct early_res *r = &early_res[i]; + printk(KERN_INFO " #%d [%010llx - %010llx] %16s", i, + r->start, r->end, r->name); + final_start = max(start, r->start); + final_end = min(end, r->end); + if (final_start >= final_end) { + printk(KERN_CONT "\n"); + continue; + } + printk(KERN_CONT " ==> [%010llx - %010llx]\n", + final_start, final_end); + reserve_bootmem_generic(final_start, final_end - final_start, + BOOTMEM_DEFAULT); + } +} + +/* Check for already reserved areas */ +static inline int __init bad_addr(u64 *addrp, u64 size, u64 align) +{ + int i; + u64 addr = *addrp; + int changed = 0; + struct early_res *r; +again: + i = find_overlapped_early(addr, addr + size); + r = &early_res[i]; + if (i < MAX_EARLY_RES && r->end) { + *addrp = addr = round_up(r->end, align); + changed = 1; + goto again; + } + return changed; +} + +/* Check for already reserved areas */ +static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align) +{ + int i; + u64 addr = *addrp, last; + u64 size = *sizep; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last > r->start && addr < r->start) { + size = r->start - addr; + changed = 1; + goto again; + } + if (last > r->end && addr < r->end) { + addr = round_up(r->end, align); + size = last - addr; + changed = 1; + goto again; + } + if (last <= r->end && addr >= r->start) { + (*sizep)++; + return 0; + } + } + if (changed) { + *addrp = addr; + *sizep = size; + } + return changed; +} + +/* + * Find a free area with specified alignment in a specific range. + */ +u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + while (bad_addr(&addr, size, align) && addr+size <= ei_last) + ; + last = addr + size; + if (last > ei_last) + continue; + if (last > end) + continue; + return addr; + } + return -1ULL; +} + +/* + * Find next free range after *start + */ +u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + *sizep = ei_last - addr; + while (bad_addr_size(&addr, sizep, align) && + addr + *sizep <= ei_last) + ; + last = addr + *sizep; + if (last > ei_last) + continue; + return addr; + } + return -1UL; + +} + +/* + * pre allocated 4k and reserved it in e820 + */ +u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) +{ + u64 size = 0; + u64 addr; + u64 start; + + start = startt; + while (size < sizet) + start = find_e820_area_size(start, &size, align); + + if (size < sizet) + return 0; + + addr = round_down(start + size - sizet, align); + e820_update_range(addr, sizet, E820_RAM, E820_RESERVED); + e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED); + printk(KERN_INFO "update e820 for early_reserve_e820\n"); + update_e820(); + update_e820_saved(); + + return addr; +} + +#ifdef CONFIG_X86_32 +# ifdef CONFIG_X86_PAE +# define MAX_ARCH_PFN (1ULL<<(36-PAGE_SHIFT)) +# else +# define MAX_ARCH_PFN (1ULL<<(32-PAGE_SHIFT)) +# endif +#else /* CONFIG_X86_32 */ +# define MAX_ARCH_PFN MAXMEM>>PAGE_SHIFT +#endif + +/* + * Find the highest page frame number we have available + */ +static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +{ + int i; + unsigned long last_pfn = 0; + unsigned long max_arch_pfn = MAX_ARCH_PFN; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + unsigned long start_pfn; + unsigned long end_pfn; + + if (ei->type != type) + continue; + + start_pfn = ei->addr >> PAGE_SHIFT; + end_pfn = (ei->addr + ei->size) >> PAGE_SHIFT; + + if (start_pfn >= limit_pfn) + continue; + if (end_pfn > limit_pfn) { + last_pfn = limit_pfn; + break; + } + if (end_pfn > last_pfn) + last_pfn = end_pfn; + } + + if (last_pfn > max_arch_pfn) + last_pfn = max_arch_pfn; + + printk(KERN_INFO "last_pfn = %#lx max_arch_pfn = %#lx\n", + last_pfn, max_arch_pfn); + return last_pfn; +} +unsigned long __init e820_end_of_ram_pfn(void) +{ + return e820_end_pfn(MAX_ARCH_PFN, E820_RAM); +} + +unsigned long __init e820_end_of_low_ram_pfn(void) +{ + return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM); +} +/* + * Finds an active region in the address range from start_pfn to last_pfn and + * returns its range in ei_startpfn and ei_endpfn for the e820 entry. + */ +int __init e820_find_active_region(const struct e820entry *ei, + unsigned long start_pfn, + unsigned long last_pfn, + unsigned long *ei_startpfn, + unsigned long *ei_endpfn) +{ + u64 align = PAGE_SIZE; + + *ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT; + *ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT; + + /* Skip map entries smaller than a page */ + if (*ei_startpfn >= *ei_endpfn) + return 0; + + /* Skip if map is outside the node */ + if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || + *ei_startpfn >= last_pfn) + return 0; + + /* Check for overlaps */ + if (*ei_startpfn < start_pfn) + *ei_startpfn = start_pfn; + if (*ei_endpfn > last_pfn) + *ei_endpfn = last_pfn; + + return 1; +} + +/* Walk the e820 map and register active regions within a node */ +void __init e820_register_active_regions(int nid, unsigned long start_pfn, + unsigned long last_pfn) +{ + unsigned long ei_startpfn; + unsigned long ei_endpfn; + int i; + + for (i = 0; i < e820.nr_map; i++) + if (e820_find_active_region(&e820.map[i], + start_pfn, last_pfn, + &ei_startpfn, &ei_endpfn)) + add_active_range(nid, ei_startpfn, ei_endpfn); +} + +/* + * Find the hole size (in bytes) in the memory range. + * @start: starting address of the memory range to scan + * @end: ending address of the memory range to scan + */ +u64 __init e820_hole_size(u64 start, u64 end) +{ + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long last_pfn = end >> PAGE_SHIFT; + unsigned long ei_startpfn, ei_endpfn, ram = 0; + int i; + + for (i = 0; i < e820.nr_map; i++) { + if (e820_find_active_region(&e820.map[i], + start_pfn, last_pfn, + &ei_startpfn, &ei_endpfn)) + ram += ei_endpfn - ei_startpfn; + } + return end - start - ((u64)ram << PAGE_SHIFT); +} + +static void early_panic(char *msg) +{ + early_printk(msg); + panic(msg); +} + +static int userdef __initdata; + +/* "mem=nopentium" disables the 4MB page tables. */ +static int __init parse_memopt(char *p) +{ + u64 mem_size; + + if (!p) + return -EINVAL; + +#ifdef CONFIG_X86_32 + if (!strcmp(p, "nopentium")) { + setup_clear_cpu_cap(X86_FEATURE_PSE); + return 0; + } +#endif + + userdef = 1; + mem_size = memparse(p, &p); + e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1); + + return 0; +} +early_param("mem", parse_memopt); + +static int __init parse_memmap_opt(char *p) +{ + char *oldp; + u64 start_at, mem_size; + + if (!p) + return -EINVAL; + + if (!strncmp(p, "exactmap", 8)) { +#ifdef CONFIG_CRASH_DUMP + /* + * If we are doing a crash dump, we still need to know + * the real mem size before original memory map is + * reset. + */ + saved_max_pfn = e820_end_of_ram_pfn(); +#endif + e820.nr_map = 0; + userdef = 1; + return 0; + } + + oldp = p; + mem_size = memparse(p, &p); + if (p == oldp) + return -EINVAL; + + userdef = 1; + if (*p == '@') { + start_at = memparse(p+1, &p); + e820_add_region(start_at, mem_size, E820_RAM); + } else if (*p == '#') { + start_at = memparse(p+1, &p); + e820_add_region(start_at, mem_size, E820_ACPI); + } else if (*p == '$') { + start_at = memparse(p+1, &p); + e820_add_region(start_at, mem_size, E820_RESERVED); + } else + e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1); + + return *p == '\0' ? 0 : -EINVAL; +} +early_param("memmap", parse_memmap_opt); + +void __init finish_e820_parsing(void) +{ + if (userdef) { + int nr = e820.nr_map; + + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) + early_panic("Invalid user supplied memory map"); + e820.nr_map = nr; + + printk(KERN_INFO "user-defined physical RAM map:\n"); + e820_print_map("user"); + } +} + +static inline const char *e820_type_to_string(int e820_type) +{ + switch (e820_type) { + case E820_RESERVED_KERN: + case E820_RAM: return "System RAM"; + case E820_ACPI: return "ACPI Tables"; + case E820_NVS: return "ACPI Non-volatile Storage"; + case E820_UNUSABLE: return "Unusable memory"; + default: return "reserved"; + } +} + +/* + * Mark e820 reserved areas as busy for the resource manager. + */ +static struct resource __initdata *e820_res; +void __init e820_reserve_resources(void) +{ + int i; + struct resource *res; + u64 end; + + res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map); + e820_res = res; + for (i = 0; i < e820.nr_map; i++) { + end = e820.map[i].addr + e820.map[i].size - 1; +#ifndef CONFIG_RESOURCES_64BIT + if (end > 0x100000000ULL) { + res++; + continue; + } +#endif + res->name = e820_type_to_string(e820.map[i].type); + res->start = e820.map[i].addr; + res->end = end; + + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + + /* + * don't register the region that could be conflicted with + * pci device BAR resource and insert them later in + * pcibios_resource_survey() + */ + if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) + insert_resource(&iomem_resource, res); + res++; + } + + for (i = 0; i < e820_saved.nr_map; i++) { + struct e820entry *entry = &e820_saved.map[i]; + firmware_map_add_early(entry->addr, + entry->addr + entry->size - 1, + e820_type_to_string(entry->type)); + } +} + +void __init e820_reserve_resources_late(void) +{ + int i; + struct resource *res; + + res = e820_res; + for (i = 0; i < e820.nr_map; i++) { + if (!res->parent && res->end) + reserve_region_with_split(&iomem_resource, res->start, res->end, res->name); + res++; + } +} + +char *__init default_machine_specific_memory_setup(void) +{ + char *who = "BIOS-e820"; + int new_nr; + /* + * Try to copy the BIOS-supplied E820-map. + * + * Otherwise fake a memory map; one section from 0k->640k, + * the next section from 1mb->appropriate_mem_k + */ + new_nr = boot_params.e820_entries; + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &new_nr); + boot_params.e820_entries = new_nr; + if (append_e820_map(boot_params.e820_map, boot_params.e820_entries) + < 0) { + u64 mem_size; + + /* compare results from other methods and take the greater */ + if (boot_params.alt_mem_k + < boot_params.screen_info.ext_mem_k) { + mem_size = boot_params.screen_info.ext_mem_k; + who = "BIOS-88"; + } else { + mem_size = boot_params.alt_mem_k; + who = "BIOS-e801"; + } + + e820.nr_map = 0; + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); + } + + /* In case someone cares... */ + return who; +} + +char *__init __attribute__((weak)) machine_specific_memory_setup(void) +{ + if (x86_quirks->arch_memory_setup) { + char *who = x86_quirks->arch_memory_setup(); + + if (who) + return who; + } + return default_machine_specific_memory_setup(); +} + +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +char * __init __attribute__((weak)) memory_setup(void) +{ + return machine_specific_memory_setup(); +} + +void __init setup_memory_map(void) +{ + char *who; + + who = memory_setup(); + memcpy(&e820_saved, &e820, sizeof(struct e820map)); + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + e820_print_map(who); +} diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c deleted file mode 100644 index ed733e7cf4e..00000000000 --- a/arch/x86/kernel/e820_32.c +++ /dev/null @@ -1,775 +0,0 @@ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/kexec.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/pfn.h> -#include <linux/uaccess.h> -#include <linux/suspend.h> - -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/e820.h> -#include <asm/setup.h> - -struct e820map e820; -struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ -}; -static struct change_member change_point_list[2*E820MAX] __initdata; -static struct change_member *change_point[2*E820MAX] __initdata; -static struct e820entry *overlap_list[E820MAX] __initdata; -static struct e820entry new_bios[E820MAX] __initdata; -/* For PCI or other memory-mapped resources */ -unsigned long pci_mem_start = 0x10000000; -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_mem_start); -#endif -extern int user_defined_memmap; - -static struct resource system_rom_resource = { - .name = "System ROM", - .start = 0xf0000, - .end = 0xfffff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource extension_rom_resource = { - .name = "Extension ROM", - .start = 0xe0000, - .end = 0xeffff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource adapter_rom_resources[] = { { - .name = "Adapter ROM", - .start = 0xc8000, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -} }; - -static struct resource video_rom_resource = { - .name = "Video ROM", - .start = 0xc0000, - .end = 0xc7fff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -#define ROMSIGNATURE 0xaa55 - -static int __init romsignature(const unsigned char *rom) -{ - const unsigned short * const ptr = (const unsigned short *)rom; - unsigned short sig; - - return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE; -} - -static int __init romchecksum(const unsigned char *rom, unsigned long length) -{ - unsigned char sum, c; - - for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--) - sum += c; - return !length && !sum; -} - -static void __init probe_roms(void) -{ - const unsigned char *rom; - unsigned long start, length, upper; - unsigned char c; - int i; - - /* video rom */ - upper = adapter_rom_resources[0].start; - for (start = video_rom_resource.start; start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - video_rom_resource.start = start; - - if (probe_kernel_address(rom + 2, c) != 0) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = c * 512; - - /* if checksum okay, trust length byte */ - if (length && romchecksum(rom, length)) - video_rom_resource.end = start + length - 1; - - request_resource(&iomem_resource, &video_rom_resource); - break; - } - - start = (video_rom_resource.end + 1 + 2047) & ~2047UL; - if (start < upper) - start = upper; - - /* system rom */ - request_resource(&iomem_resource, &system_rom_resource); - upper = system_rom_resource.start; - - /* check for extension rom (ignore length byte!) */ - rom = isa_bus_to_virt(extension_rom_resource.start); - if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; - if (romchecksum(rom, length)) { - request_resource(&iomem_resource, &extension_rom_resource); - upper = extension_rom_resource.start; - } - } - - /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - if (probe_kernel_address(rom + 2, c) != 0) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = c * 512; - - /* but accept any length that fits if checksum okay */ - if (!length || start + length > upper || !romchecksum(rom, length)) - continue; - - adapter_rom_resources[i].start = start; - adapter_rom_resources[i].end = start + length - 1; - request_resource(&iomem_resource, &adapter_rom_resources[i]); - - start = adapter_rom_resources[i++].end & ~2047UL; - } -} - -/* - * Request address space for all standard RAM and ROM resources - * and also for regions reported as reserved by the e820. - */ -void __init init_iomem_resources(struct resource *code_resource, - struct resource *data_resource, - struct resource *bss_resource) -{ - int i; - - probe_roms(); - for (i = 0; i < e820.nr_map; i++) { - struct resource *res; -#ifndef CONFIG_RESOURCES_64BIT - if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) - continue; -#endif - res = kzalloc(sizeof(struct resource), GFP_ATOMIC); - switch (e820.map[i].type) { - case E820_RAM: res->name = "System RAM"; break; - case E820_ACPI: res->name = "ACPI Tables"; break; - case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; - default: res->name = "reserved"; - } - res->start = e820.map[i].addr; - res->end = res->start + e820.map[i].size - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, res)) { - kfree(res); - continue; - } - if (e820.map[i].type == E820_RAM) { - /* - * We don't know which RAM region contains kernel data, - * so we try it repeatedly and let the resource manager - * test it. - */ - request_resource(res, code_resource); - request_resource(res, data_resource); - request_resource(res, bss_resource); -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) - request_resource(res, &crashk_res); -#endif - } - } -} - -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -/** - * e820_mark_nosave_regions - Find the ranges of physical addresses that do not - * correspond to e820 RAM areas and mark the corresponding pages as nosave for - * hibernation. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long pfn; - - pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (pfn < PFN_UP(ei->addr)) - register_nosave_region(pfn, PFN_UP(ei->addr)); - - pfn = PFN_DOWN(ei->addr + ei->size); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), pfn); - - if (pfn >= max_low_pfn) - break; - } -} -#endif - -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type) -{ - int x; - - x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} /* add_memory_region */ - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) -{ - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) { - return -1; - } - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i=0; i<old_nr; i++) - if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) { - return -1; - } - - /* create pointers for initial change-point information (for sorting) */ - for (i=0; i < 2*old_nr; i++) - change_point[i] = &change_point_list[i]; - - /* record all known change-points (starting and ending addresses), - omitting those that are for empty memory regions */ - chgidx = 0; - for (i=0; i < old_nr; i++) { - if (biosmap[i].size != 0) { - change_point[chgidx]->addr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; /* true number of change-points */ - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i=1; i < chg_nr; i++) { - /* if <current_addr> > <last_addr>, swap */ - /* or, if current=<start_addr> & last=<end_addr>, swap */ - if ((change_point[i]->addr < change_point[i-1]->addr) || - ((change_point[i]->addr == change_point[i-1]->addr) && - (change_point[i]->addr == change_point[i]->pbios->addr) && - (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) - ) - { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing=1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries=0; /* number of entries in the overlap table */ - new_bios_entry=0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - /* loop through change-points, determining affect on the new bios map */ - for (chgidx=0; chgidx < chg_nr; chgidx++) - { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) - { - /* add map entry to overlap list (> 1 entry implies an overlap) */ - overlap_list[overlap_entries++]=change_point[chgidx]->pbios; - } - else - { - /* remove entry from list (order independent, so swap with last) */ - for (i=0; i<overlap_entries; i++) - { - if (overlap_list[i] == change_point[chgidx]->pbios) - overlap_list[i] = overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* if there are overlapping entries, decide which "type" to use */ - /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ - current_type = 0; - for (i=0; i<overlap_entries; i++) - if (overlap_list[i]->type > current_type) - current_type = overlap_list[i]->type; - /* continue building up new bios map based on this information */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* move forward only if the new size was non-zero */ - if (new_bios[new_bios_entry].size != 0) - if (++new_bios_entry >= E820MAX) - break; /* no more space left for new bios entries */ - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr=change_point[chgidx]->addr; - } - last_type = current_type; - } - } - new_nr = new_bios_entry; /* retain count for new bios entries */ - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) - */ -int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - - return 0; -} - -/* - * Find the highest page frame number we have available - */ -void __init propagate_e820_map(void) -{ - int i; - - max_pfn = 0; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long start, end; - /* RAM? */ - if (e820.map[i].type != E820_RAM) - continue; - start = PFN_UP(e820.map[i].addr); - end = PFN_DOWN(e820.map[i].addr + e820.map[i].size); - if (start >= end) - continue; - if (end > max_pfn) - max_pfn = end; - memory_present(0, start, end); - } -} - -/* - * Register fully available low RAM pages with the bootmem allocator. - */ -void __init register_bootmem_low_pages(unsigned long max_low_pfn) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long curr_pfn, last_pfn, size; - /* - * Reserve usable low memory - */ - if (e820.map[i].type != E820_RAM) - continue; - /* - * We are rounding up the start address of usable memory: - */ - curr_pfn = PFN_UP(e820.map[i].addr); - if (curr_pfn >= max_low_pfn) - continue; - /* - * ... and at the end of the usable range downwards: - */ - last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size); - - if (last_pfn > max_low_pfn) - last_pfn = max_low_pfn; - - /* - * .. finally, did all the rounding and playing - * around just make the area go away? - */ - if (last_pfn <= curr_pfn) - continue; - - size = last_pfn - curr_pfn; - free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); - } -} - -void __init e820_register_memory(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long long last; - int i; - - /* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. - */ - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - } - } - if (start < last) - last = start; - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", - pci_mem_start, gapstart, gapsize); -} - -void __init print_memory_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(" %s: %016Lx - %016Lx ", who, - e820.map[i].addr, - e820.map[i].addr + e820.map[i].size); - switch (e820.map[i].type) { - case E820_RAM: printk("(usable)\n"); - break; - case E820_RESERVED: - printk("(reserved)\n"); - break; - case E820_ACPI: - printk("(ACPI data)\n"); - break; - case E820_NVS: - printk("(ACPI NVS)\n"); - break; - default: printk("type %u\n", e820.map[i].type); - break; - } - } -} - -void __init limit_regions(unsigned long long size) -{ - unsigned long long current_addr; - int i; - - print_memory_map("limit_regions start"); - for (i = 0; i < e820.nr_map; i++) { - current_addr = e820.map[i].addr + e820.map[i].size; - if (current_addr < size) - continue; - - if (e820.map[i].type != E820_RAM) - continue; - - if (e820.map[i].addr >= size) { - /* - * This region starts past the end of the - * requested size, skip it completely. - */ - e820.nr_map = i; - } else { - e820.nr_map = i + 1; - e820.map[i].size -= current_addr - size; - } - print_memory_map("limit_regions endfor"); - return; - } - print_memory_map("limit_regions endfunc"); -} - -/* - * This function checks if any part of the range <start,end> is mapped - * with type. - */ -int -e820_any_mapped(u64 start, u64 end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - const struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - - /* - * This function checks if the entire range <start,end> is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init -e820_all_mapped(unsigned long s, unsigned long e, unsigned type) -{ - u64 start = s; - u64 end = e; - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - /* if the region is at the beginning of <start,end> we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* if start is now at or beyond end, we're done, full - * coverage */ - if (start >= end) - return 1; /* we're done */ - } - return 0; -} - -static int __init parse_memmap(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "exactmap") == 0) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - propagate_e820_map(); - saved_max_pfn = max_pfn; -#endif - e820.nr_map = 0; - user_defined_memmap = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long start_at, mem_size; - - mem_size = memparse(arg, &arg); - if (*arg == '@') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*arg == '#') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*arg == '$') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - limit_regions(mem_size); - user_defined_memmap = 1; - } - } - return 0; -} -early_param("memmap", parse_memmap); -void __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { - ei->type = new_type; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - } -} -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - print_memory_map("modified"); -} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c deleted file mode 100644 index 124480c0008..00000000000 --- a/arch/x86/kernel/e820_64.c +++ /dev/null @@ -1,952 +0,0 @@ -/* - * Handle the memory map. - * The functions here do the job until bootmem takes over. - * - * Getting sanitize_e820_map() in sync with i386 version by applying change: - * - Provisions for empty E820 memory regions (reported by certain BIOSes). - * Alex Achenbach <xela@slit.de>, December 2002. - * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - * - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/kexec.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/suspend.h> -#include <linux/pfn.h> - -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/e820.h> -#include <asm/proto.h> -#include <asm/setup.h> -#include <asm/sections.h> -#include <asm/kdebug.h> -#include <asm/trampoline.h> - -struct e820map e820; - -/* - * PFN of last memory page. - */ -unsigned long end_pfn; - -/* - * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. - * The direct mapping extends to max_pfn_mapped, so that we can directly access - * apertures, ACPI and other tables without having to play with fixmaps. - */ -unsigned long max_pfn_mapped; - -/* - * Last pfn which the user wants to use. - */ -static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; - -/* - * Early reserved memory areas. - */ -#define MAX_EARLY_RES 20 - -struct early_res { - unsigned long start, end; - char name[16]; -}; -static struct early_res early_res[MAX_EARLY_RES] __initdata = { - { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ -#ifdef CONFIG_X86_TRAMPOLINE - { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, -#endif - {} -}; - -void __init reserve_early(unsigned long start, unsigned long end, char *name) -{ - int i; - struct early_res *r; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (end > r->start && start < r->end) - panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n", - start, end - 1, name?name:"", r->start, r->end - 1, r->name); - } - if (i >= MAX_EARLY_RES) - panic("Too many early reservations"); - r = &early_res[i]; - r->start = start; - r->end = end; - if (name) - strncpy(r->name, name, sizeof(r->name) - 1); -} - -void __init free_early(unsigned long start, unsigned long end) -{ - struct early_res *r; - int i, j; - - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (start == r->start && end == r->end) - break; - } - if (i >= MAX_EARLY_RES || !early_res[i].end) - panic("free_early on not reserved area: %lx-%lx!", start, end); - - for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) - ; - - memmove(&early_res[i], &early_res[i + 1], - (j - 1 - i) * sizeof(struct early_res)); - - early_res[j - 1].end = 0; -} - -void __init early_res_to_bootmem(unsigned long start, unsigned long end) -{ - int i; - unsigned long final_start, final_end; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - final_start = max(start, r->start); - final_end = min(end, r->end); - if (final_start >= final_end) - continue; - printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i, - final_start, final_end - 1, r->name); - reserve_bootmem_generic(final_start, final_end - final_start); - } -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr(unsigned long *addrp, unsigned long size, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last >= r->start && addr < r->end) { - *addrp = addr = round_up(r->end, align); - changed = 1; - goto again; - } - } - return changed; -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - unsigned long size = *sizep; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last > r->start && addr < r->start) { - size = r->start - addr; - changed = 1; - goto again; - } - if (last > r->end && addr < r->end) { - addr = round_up(r->end, align); - size = last - addr; - changed = 1; - goto again; - } - if (last <= r->end && addr >= r->start) { - (*sizep)++; - return 0; - } - } - if (changed) { - *addrp = addr; - *sizep = size; - } - return changed; -} -/* - * This function checks if any part of the range <start,end> is mapped - * with type. - */ -int -e820_any_mapped(unsigned long start, unsigned long end, unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - -/* - * This function checks if the entire range <start,end> is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init e820_all_mapped(unsigned long start, unsigned long end, - unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - - /* if the region is at the beginning of <start,end> we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* - * if start is now at or beyond end, we're done, full - * coverage - */ - if (start >= end) - return 1; - } - return 0; -} - -/* - * Find a free area with specified alignment in a specific range. - */ -unsigned long __init find_e820_area(unsigned long start, unsigned long end, - unsigned long size, unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - while (bad_addr(&addr, size, align) && addr+size <= ei_last) - ; - last = addr + size; - if (last > ei_last) - continue; - if (last > end) - continue; - return addr; - } - return -1UL; -} - -/* - * Find next free range after *start - */ -unsigned long __init find_e820_area_size(unsigned long start, - unsigned long *sizep, - unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - *sizep = ei_last - addr; - while (bad_addr_size(&addr, sizep, align) && - addr + *sizep <= ei_last) - ; - last = addr + *sizep; - if (last > ei_last) - continue; - return addr; - } - return -1UL; - -} -/* - * Find the highest page frame number we have available - */ -unsigned long __init e820_end_of_ram(void) -{ - unsigned long end_pfn; - - end_pfn = find_max_pfn_with_active_regions(); - - if (end_pfn > max_pfn_mapped) - max_pfn_mapped = end_pfn; - if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT) - max_pfn_mapped = MAXMEM>>PAGE_SHIFT; - if (end_pfn > end_user_pfn) - end_pfn = end_user_pfn; - if (end_pfn > max_pfn_mapped) - end_pfn = max_pfn_mapped; - - printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped); - return end_pfn; -} - -/* - * Mark e820 reserved areas as busy for the resource manager. - */ -void __init e820_reserve_resources(void) -{ - int i; - struct resource *res; - - res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map); - for (i = 0; i < e820.nr_map; i++) { - switch (e820.map[i].type) { - case E820_RAM: res->name = "System RAM"; break; - case E820_ACPI: res->name = "ACPI Tables"; break; - case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; - default: res->name = "reserved"; - } - res->start = e820.map[i].addr; - res->end = res->start + e820.map[i].size - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); - res++; - } -} - -/* - * Find the ranges of physical addresses that do not correspond to - * e820 RAM areas and mark the corresponding pages as nosave for software - * suspend and suspend to RAM. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long paddr; - - paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (paddr < ei->addr) - register_nosave_region(PFN_DOWN(paddr), - PFN_UP(ei->addr)); - - paddr = round_down(ei->addr + ei->size, PAGE_SIZE); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), - PFN_DOWN(paddr)); - - if (paddr >= (end_pfn << PAGE_SHIFT)) - break; - } -} - -/* - * Finds an active region in the address range from start_pfn to end_pfn and - * returns its range in ei_startpfn and ei_endpfn for the e820 entry. - */ -static int __init e820_find_active_region(const struct e820entry *ei, - unsigned long start_pfn, - unsigned long end_pfn, - unsigned long *ei_startpfn, - unsigned long *ei_endpfn) -{ - *ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT; - *ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT; - - /* Skip map entries smaller than a page */ - if (*ei_startpfn >= *ei_endpfn) - return 0; - - /* Check if max_pfn_mapped should be updated */ - if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped) - max_pfn_mapped = *ei_endpfn; - - /* Skip if map is outside the node */ - if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= end_pfn) - return 0; - - /* Check for overlaps */ - if (*ei_startpfn < start_pfn) - *ei_startpfn = start_pfn; - if (*ei_endpfn > end_pfn) - *ei_endpfn = end_pfn; - - /* Obey end_user_pfn to save on memmap */ - if (*ei_startpfn >= end_user_pfn) - return 0; - if (*ei_endpfn > end_user_pfn) - *ei_endpfn = end_user_pfn; - - return 1; -} - -/* Walk the e820 map and register active regions within a node */ -void __init -e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn) -{ - unsigned long ei_startpfn; - unsigned long ei_endpfn; - int i; - - for (i = 0; i < e820.nr_map; i++) - if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, - &ei_startpfn, &ei_endpfn)) - add_active_range(nid, ei_startpfn, ei_endpfn); -} - -/* - * Add a memory region to the kernel e820 map. - */ -void __init add_memory_region(unsigned long start, unsigned long size, int type) -{ - int x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} - -/* - * Find the hole size (in bytes) in the memory range. - * @start: starting address of the memory range to scan - * @end: ending address of the memory range to scan - */ -unsigned long __init e820_hole_size(unsigned long start, unsigned long end) -{ - unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long end_pfn = end >> PAGE_SHIFT; - unsigned long ei_startpfn, ei_endpfn, ram = 0; - int i; - - for (i = 0; i < e820.nr_map; i++) { - if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, - &ei_startpfn, &ei_endpfn)) - ram += ei_endpfn - ei_startpfn; - } - return end - start - (ram << PAGE_SHIFT); -} - -static void __init e820_print_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(KERN_INFO " %s: %016Lx - %016Lx ", who, - (unsigned long long) e820.map[i].addr, - (unsigned long long) - (e820.map[i].addr + e820.map[i].size)); - switch (e820.map[i].type) { - case E820_RAM: - printk(KERN_CONT "(usable)\n"); - break; - case E820_RESERVED: - printk(KERN_CONT "(reserved)\n"); - break; - case E820_ACPI: - printk(KERN_CONT "(ACPI data)\n"); - break; - case E820_NVS: - printk(KERN_CONT "(ACPI NVS)\n"); - break; - default: - printk(KERN_CONT "type %u\n", e820.map[i].type); - break; - } - } -} - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) -{ - struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ - }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) - return -1; - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i = 0; i < old_nr; i++) - if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) - return -1; - - /* create pointers for initial change-point information (for sorting) */ - for (i = 0; i < 2 * old_nr; i++) - change_point[i] = &change_point_list[i]; - - /* record all known change-points (starting and ending addresses), - omitting those that are for empty memory regions */ - chgidx = 0; - for (i = 0; i < old_nr; i++) { - if (biosmap[i].size != 0) { - change_point[chgidx]->addr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + - biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i = 1; i < chg_nr; i++) { - unsigned long long curaddr, lastaddr; - unsigned long long curpbaddr, lastpbaddr; - - curaddr = change_point[i]->addr; - lastaddr = change_point[i - 1]->addr; - curpbaddr = change_point[i]->pbios->addr; - lastpbaddr = change_point[i - 1]->pbios->addr; - - /* - * swap entries, when: - * - * curaddr > lastaddr or - * curaddr == lastaddr and curaddr == curpbaddr and - * lastaddr != lastpbaddr - */ - if (curaddr < lastaddr || - (curaddr == lastaddr && curaddr == curpbaddr && - lastaddr != lastpbaddr)) { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing = 1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries = 0; /* number of entries in the overlap table */ - new_bios_entry = 0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - - /* loop through change-points, determining affect on the new bios map */ - for (chgidx = 0; chgidx < chg_nr; chgidx++) { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == - change_point[chgidx]->pbios->addr) { - /* - * add map entry to overlap list (> 1 entry - * implies an overlap) - */ - overlap_list[overlap_entries++] = - change_point[chgidx]->pbios; - } else { - /* - * remove entry from list (order independent, - * so swap with last) - */ - for (i = 0; i < overlap_entries; i++) { - if (overlap_list[i] == - change_point[chgidx]->pbios) - overlap_list[i] = - overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* - * if there are overlapping entries, decide which - * "type" to use (larger value takes precedence -- - * 1=usable, 2,3,4,4+=unusable) - */ - current_type = 0; - for (i = 0; i < overlap_entries; i++) - if (overlap_list[i]->type > current_type) - current_type = overlap_list[i]->type; - /* - * continue building up new bios map based on this - * information - */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* - * move forward only if the new size - * was non-zero - */ - if (new_bios[new_bios_entry].size != 0) - /* - * no more space left for new - * bios entries ? - */ - if (++new_bios_entry >= E820MAX) - break; - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = - change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr = change_point[chgidx]->addr; - } - last_type = current_type; - } - } - /* retain count for new bios entries */ - new_nr = new_bios_entry; - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - */ -static int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - return 0; -} - -static void early_panic(char *msg) -{ - early_printk(msg); - panic(msg); -} - -/* We're not void only for x86 32-bit compat */ -char * __init machine_specific_memory_setup(void) -{ - char *who = "BIOS-e820"; - /* - * Try to copy the BIOS-supplied E820-map. - * - * Otherwise fake a memory map; one section from 0k->640k, - * the next section from 1mb->appropriate_mem_k - */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); - if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) - early_panic("Cannot find a valid memory map"); - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - e820_print_map(who); - - /* In case someone cares... */ - return who; -} - -static int __init parse_memopt(char *p) -{ - if (!p) - return -EINVAL; - end_user_pfn = memparse(p, &p); - end_user_pfn >>= PAGE_SHIFT; - return 0; -} -early_param("mem", parse_memopt); - -static int userdef __initdata; - -static int __init parse_memmap_opt(char *p) -{ - char *oldp; - unsigned long long start_at, mem_size; - - if (!strcmp(p, "exactmap")) { -#ifdef CONFIG_CRASH_DUMP - /* - * If we are doing a crash dump, we still need to know - * the real mem size before original memory map is - * reset. - */ - e820_register_active_regions(0, 0, -1UL); - saved_max_pfn = e820_end_of_ram(); - remove_all_active_ranges(); -#endif - max_pfn_mapped = 0; - e820.nr_map = 0; - userdef = 1; - return 0; - } - - oldp = p; - mem_size = memparse(p, &p); - if (p == oldp) - return -EINVAL; - - userdef = 1; - if (*p == '@') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*p == '#') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*p == '$') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - end_user_pfn = (mem_size >> PAGE_SHIFT); - } - return *p == '\0' ? 0 : -EINVAL; -} -early_param("memmap", parse_memmap_opt); - -void __init finish_e820_parsing(void) -{ - if (userdef) { - char nr = e820.nr_map; - - if (sanitize_e820_map(e820.map, &nr) < 0) - early_panic("Invalid user supplied memory map"); - e820.nr_map = nr; - - printk(KERN_INFO "user-defined physical RAM map:\n"); - e820_print_map("user"); - } -} - -void __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { - ei->type = new_type; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - } -} - -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - e820_print_map("modified"); -} - -unsigned long pci_mem_start = 0xaeedbabe; -EXPORT_SYMBOL(pci_mem_start); - -/* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. We pass this space to PCI to assign MMIO resources - * for hotplug or unconfigured devices in. - * Hopefully the BIOS let enough space left. - */ -__init void e820_setup_gap(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long last; - int i; - int found = 0; - - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - found = 1; - } - } - if (start < last) - last = start; - } - - if (!found) { - gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " - "address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource " - "registers may break!\n"); - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk(KERN_INFO - "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", - pci_mem_start, gapstart, gapsize); -} - -int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) -{ - int i; - - if (slot < 0 || slot >= e820.nr_map) - return -1; - for (i = slot; i < e820.nr_map; i++) { - if (e820.map[i].type != E820_RAM) - continue; - break; - } - if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT)) - return -1; - *addr = e820.map[i].addr; - *size = min_t(u64, e820.map[i].size + e820.map[i].addr, - max_pfn << PAGE_SHIFT) - *addr; - return i + 1; -} diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f51e1ea9e8..733c4f8d42e 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -16,10 +16,7 @@ #include <asm/dma.h> #include <asm/io_apic.h> #include <asm/apic.h> - -#ifdef CONFIG_GART_IOMMU -#include <asm/gart.h> -#endif +#include <asm/iommu.h> static void __init fix_hypertransport_config(int num, int slot, int func) { @@ -50,7 +47,7 @@ static void __init fix_hypertransport_config(int num, int slot, int func) static void __init via_bugs(int num, int slot, int func) { #ifdef CONFIG_GART_IOMMU - if ((end_pfn > MAX_DMA32_PFN || force_iommu) && + if ((max_pfn > MAX_DMA32_PFN || force_iommu) && !gart_iommu_aperture_allowed) { printk(KERN_INFO "Looks like a VIA chipset. Disabling IOMMU." @@ -98,17 +95,66 @@ static void __init nvidia_bugs(int num, int slot, int func) } +static u32 ati_ixp4x0_rev(int num, int slot, int func) +{ + u32 d; + u8 b; + + b = read_pci_config_byte(num, slot, func, 0xac); + b &= ~(1<<5); + write_pci_config_byte(num, slot, func, 0xac, b); + + d = read_pci_config(num, slot, func, 0x70); + d |= 1<<8; + write_pci_config(num, slot, func, 0x70, d); + + d = read_pci_config(num, slot, func, 0x8); + d &= 0xff; + return d; +} + static void __init ati_bugs(int num, int slot, int func) { -#ifdef CONFIG_X86_IO_APIC - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); +#if defined(CONFIG_ACPI) && defined (CONFIG_X86_IO_APIC) + u32 d; + u8 b; + + if (acpi_use_timer_override) + return; + + d = ati_ixp4x0_rev(num, slot, func); + if (d < 0x82) + acpi_skip_timer_override = 1; + else { + /* check for IRQ0 interrupt swap */ + outb(0x72, 0xcd6); b = inb(0xcd7); + if (!(b & 0x2)) + acpi_skip_timer_override = 1; + } + + if (acpi_skip_timer_override) { + printk(KERN_INFO "SB4X0 revision 0x%x\n", d); + printk(KERN_INFO "Ignoring ACPI timer override.\n"); + printk(KERN_INFO "If you got timer trouble " + "try acpi_use_timer_override\n"); } #endif } +#ifdef CONFIG_DMAR +static void __init intel_g33_dmar(int num, int slot, int func) +{ + struct acpi_table_header *dmar_tbl; + acpi_status status; + + status = acpi_get_table(ACPI_SIG_DMAR, 0, &dmar_tbl); + if (ACPI_SUCCESS(status)) { + printk(KERN_INFO "BIOS BUG: DMAR advertised on Intel G31/G33 chipset -- ignoring\n"); + dmar_disabled = 1; + } +} +#endif + #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -126,14 +172,29 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, { PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, - { PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, +#ifdef CONFIG_DMAR + { PCI_VENDOR_ID_INTEL, 0x29c0, + PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar }, +#endif {} }; -static void __init check_dev_quirk(int num, int slot, int func) +/** + * check_dev_quirk - apply early quirks to a given PCI device + * @num: bus number + * @slot: slot number + * @func: PCI function + * + * Check the vendor & device ID against the early quirks table. + * + * If the device is single function, let early_quirks() know so we don't + * poke at this device again. + */ +static int __init check_dev_quirk(int num, int slot, int func) { u16 class; u16 vendor; @@ -144,7 +205,7 @@ static void __init check_dev_quirk(int num, int slot, int func) class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); if (class == 0xffff) - return; + return -1; /* no class, treat as single function */ vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID); @@ -167,7 +228,9 @@ static void __init check_dev_quirk(int num, int slot, int func) type = read_pci_config_byte(num, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) - return; + return -1; + + return 0; } void __init early_quirks(void) @@ -180,6 +243,9 @@ void __init early_quirks(void) /* Poor man's PCI discovery */ for (num = 0; num < 32; num++) for (slot = 0; slot < 32; slot++) - for (func = 0; func < 8; func++) - check_dev_quirk(num, slot, func); + for (func = 0; func < 8; func++) { + /* Only probe function 0 on single fn devices */ + if (check_dev_quirk(num, slot, func)) + break; + } } diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 643fd861b72..34ad997d383 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -3,11 +3,19 @@ #include <linux/init.h> #include <linux/string.h> #include <linux/screen_info.h> +#include <linux/usb/ch9.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> +#include <linux/errno.h> #include <asm/io.h> #include <asm/processor.h> #include <asm/fcntl.h> #include <asm/setup.h> #include <xen/hvc-console.h> +#include <asm/pci-direct.h> +#include <asm/pgtable.h> +#include <asm/fixmap.h> +#include <linux/usb/ehci_def.h> /* Simple VGA output */ #define VGABASE (__ISA_IO_base + 0xb8000) @@ -78,6 +86,7 @@ static int early_serial_base = 0x3f8; /* ttyS0 */ static int early_serial_putc(unsigned char ch) { unsigned timeout = 0xffff; + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) cpu_relax(); outb(ch, early_serial_base + TXR); @@ -111,7 +120,7 @@ static __init void early_serial_init(char *s) if (!strncmp(s, "0x", 2)) { early_serial_base = simple_strtoul(s, &e, 16); } else { - static int bases[] = { 0x3f8, 0x2f8 }; + static const int __initconst bases[] = { 0x3f8, 0x2f8 }; if (!strncmp(s, "ttyS", 4)) s += 4; @@ -151,6 +160,721 @@ static struct console early_serial_console = { .index = -1, }; +#ifdef CONFIG_EARLY_PRINTK_DBGP + +static struct ehci_caps __iomem *ehci_caps; +static struct ehci_regs __iomem *ehci_regs; +static struct ehci_dbg_port __iomem *ehci_debug; +static unsigned int dbgp_endpoint_out; + +struct ehci_dev { + u32 bus; + u32 slot; + u32 func; +}; + +static struct ehci_dev ehci_dev; + +#define USB_DEBUG_DEVNUM 127 + +#define DBGP_DATA_TOGGLE 0x8800 + +static inline u32 dbgp_pid_update(u32 x, u32 tok) +{ + return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); +} + +static inline u32 dbgp_len_update(u32 x, u32 len) +{ + return (x & ~0x0f) | (len & 0x0f); +} + +/* + * USB Packet IDs (PIDs) + */ + +/* token */ +#define USB_PID_OUT 0xe1 +#define USB_PID_IN 0x69 +#define USB_PID_SOF 0xa5 +#define USB_PID_SETUP 0x2d +/* handshake */ +#define USB_PID_ACK 0xd2 +#define USB_PID_NAK 0x5a +#define USB_PID_STALL 0x1e +#define USB_PID_NYET 0x96 +/* data */ +#define USB_PID_DATA0 0xc3 +#define USB_PID_DATA1 0x4b +#define USB_PID_DATA2 0x87 +#define USB_PID_MDATA 0x0f +/* Special */ +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_ERR 0x3c +#define USB_PID_SPLIT 0x78 +#define USB_PID_PING 0xb4 +#define USB_PID_UNDEF_0 0xf0 + +#define USB_PID_DATA_TOGGLE 0x88 +#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) + +#define PCI_CAP_ID_EHCI_DEBUG 0xa + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 500 + +#define DBGP_MAX_PACKET 8 + +static int dbgp_wait_until_complete(void) +{ + u32 ctrl; + int loop = 0x100000; + + do { + ctrl = readl(&ehci_debug->control); + /* Stop when the transaction is finished */ + if (ctrl & DBGP_DONE) + break; + } while (--loop > 0); + + if (!loop) + return -1; + + /* + * Now that we have observed the completed transaction, + * clear the done bit. + */ + writel(ctrl | DBGP_DONE, &ehci_debug->control); + return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); +} + +static void dbgp_mdelay(int ms) +{ + int i; + + while (ms--) { + for (i = 0; i < 1000; i++) + outb(0x1, 0x80); + } +} + +static void dbgp_breath(void) +{ + /* Sleep to give the debug port a chance to breathe */ +} + +static int dbgp_wait_until_done(unsigned ctrl) +{ + u32 pids, lpid; + int ret; + int loop = 3; + +retry: + writel(ctrl | DBGP_GO, &ehci_debug->control); + ret = dbgp_wait_until_complete(); + pids = readl(&ehci_debug->pids); + lpid = DBGP_PID_GET(pids); + + if (ret < 0) + return ret; + + /* + * If the port is getting full or it has dropped data + * start pacing ourselves, not necessary but it's friendly. + */ + if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) + dbgp_breath(); + + /* If I get a NACK reissue the transmission */ + if (lpid == USB_PID_NAK) { + if (--loop > 0) + goto retry; + } + + return ret; +} + +static void dbgp_set_data(const void *buf, int size) +{ + const unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = hi = 0; + for (i = 0; i < 4 && i < size; i++) + lo |= bytes[i] << (8*i); + for (; i < 8 && i < size; i++) + hi |= bytes[i] << (8*(i - 4)); + writel(lo, &ehci_debug->data03); + writel(hi, &ehci_debug->data47); +} + +static void dbgp_get_data(void *buf, int size) +{ + unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = readl(&ehci_debug->data03); + hi = readl(&ehci_debug->data47); + for (i = 0; i < 4 && i < size; i++) + bytes[i] = (lo >> (8*i)) & 0xff; + for (; i < 8 && i < size; i++) + bytes[i] = (hi >> (8*(i - 4))) & 0xff; +} + +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_OUT); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + dbgp_set_data(bytes, size); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + return ret; +} + +static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, + int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_IN); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl &= ~DBGP_OUT; + ctrl |= DBGP_GO; + + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + if (size > ret) + size = ret; + dbgp_get_data(data, size); + return ret; +} + +static int dbgp_control_msg(unsigned devnum, int requesttype, int request, + int value, int index, void *data, int size) +{ + u32 pids, addr, ctrl; + struct usb_ctrlrequest req; + int read; + int ret; + + read = (requesttype & USB_DIR_IN) != 0; + if (size > (read ? DBGP_MAX_PACKET:0)) + return -1; + + /* Compute the control message */ + req.bRequestType = requesttype; + req.bRequest = request; + req.wValue = cpu_to_le16(value); + req.wIndex = cpu_to_le16(index); + req.wLength = cpu_to_le16(size); + + pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); + addr = DBGP_EPADDR(devnum, 0); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, sizeof(req)); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + /* Send the setup message */ + dbgp_set_data(&req, sizeof(req)); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + /* Read the result */ + return dbgp_bulk_read(devnum, 0, data, size); +} + + +/* Find a PCI capability */ +static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) +{ + u8 pos; + int bytes; + + if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + + pos = read_pci_config_byte(num, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) +{ + u32 class; + + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); + if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) + return 0; + + return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); +} + +static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) +{ + u32 bus, slot, func; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + unsigned cap; + + cap = __find_dbgp(bus, slot, func); + + if (!cap) + continue; + if (ehci_num-- != 0) + continue; + *rbus = bus; + *rslot = slot; + *rfunc = func; + return cap; + } + } + } + return 0; +} + +static int ehci_reset_port(int port) +{ + u32 portsc; + u32 delay_time, delay; + int loop; + + /* Reset the usb debug port */ + portsc = readl(&ehci_regs->port_status[port - 1]); + portsc &= ~PORT_PE; + portsc |= PORT_RESET; + writel(portsc, &ehci_regs->port_status[port - 1]); + + delay = HUB_ROOT_RESET_TIME; + for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + dbgp_mdelay(delay); + + portsc = readl(&ehci_regs->port_status[port - 1]); + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 2; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } + + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; + + /* bomb out completely if something weird happend */ + if ((portsc & PORT_CSC)) + return -EINVAL; + + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; + } + return -EBUSY; +} + +static int ehci_wait_for_port(int port) +{ + u32 status; + int ret, reps; + + for (reps = 0; reps < 3; reps++) { + dbgp_mdelay(100); + status = readl(&ehci_regs->status); + if (status & STS_PCD) { + ret = ehci_reset_port(port); + if (ret == 0) + return 0; + } + } + return -ENOTCONN; +} + +#ifdef DBGP_DEBUG +# define dbgp_printk early_printk +#else +static inline void dbgp_printk(const char *fmt, ...) { } +#endif + +typedef void (*set_debug_port_t)(int port); + +static void default_set_debug_port(int port) +{ +} + +static set_debug_port_t set_debug_port = default_set_debug_port; + +static void nvidia_set_debug_port(int port) +{ + u32 dword; + dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x74); + dword &= ~(0x0f<<12); + dword |= ((port & 0x0f)<<12); + write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, + dword); + dbgp_printk("set debug port to %d\n", port); +} + +static void __init detect_set_debug_port(void) +{ + u32 vendorid; + + vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x00); + + if ((vendorid & 0xffff) == 0x10de) { + dbgp_printk("using nvidia set_debug_port\n"); + set_debug_port = nvidia_set_debug_port; + } +} + +static int __init ehci_setup(void) +{ + struct usb_debug_descriptor dbgp_desc; + u32 cmd, ctrl, status, portsc, hcs_params; + u32 debug_port, new_debug_port = 0, n_ports; + u32 devnum; + int ret, i; + int loop; + int port_map_tried; + int playtimes = 3; + +try_next_time: + port_map_tried = 0; + +try_next_port: + + hcs_params = readl(&ehci_caps->hcs_params); + debug_port = HCS_DEBUG_PORT(hcs_params); + n_ports = HCS_N_PORTS(hcs_params); + + dbgp_printk("debug_port: %d\n", debug_port); + dbgp_printk("n_ports: %d\n", n_ports); + + for (i = 1; i <= n_ports; i++) { + portsc = readl(&ehci_regs->port_status[i-1]); + dbgp_printk("portstatus%d: %08x\n", i, portsc); + } + + if (port_map_tried && (new_debug_port != debug_port)) { + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + return -1; + } + + loop = 10; + /* Reset the EHCI controller */ + cmd = readl(&ehci_regs->command); + cmd |= CMD_RESET; + writel(cmd, &ehci_regs->command); + do { + cmd = readl(&ehci_regs->command); + } while ((cmd & CMD_RESET) && (--loop > 0)); + + if (!loop) { + dbgp_printk("can not reset ehci\n"); + return -1; + } + dbgp_printk("ehci reset done\n"); + + /* Claim ownership, but do not enable yet */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_OWNER; + ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); + writel(ctrl, &ehci_debug->control); + + /* Start the ehci running */ + cmd = readl(&ehci_regs->command); + cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + + /* Ensure everything is routed to the EHCI */ + writel(FLAG_CF, &ehci_regs->configured_flag); + + /* Wait until the controller is no longer halted */ + loop = 10; + do { + status = readl(&ehci_regs->status); + } while ((status & STS_HALT) && (--loop > 0)); + + if (!loop) { + dbgp_printk("ehci can be started\n"); + return -1; + } + dbgp_printk("ehci started\n"); + + /* Wait for a device to show up in the debug port */ + ret = ehci_wait_for_port(debug_port); + if (ret < 0) { + dbgp_printk("No device found in debug port\n"); + goto next_debug_port; + } + dbgp_printk("ehci wait for port done\n"); + + /* Enable the debug port */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_CLAIM; + writel(ctrl, &ehci_debug->control); + ctrl = readl(&ehci_debug->control); + if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { + dbgp_printk("No device in debug port\n"); + writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + goto err; + } + dbgp_printk("debug ported enabled\n"); + + /* Completely transfer the debug device to the debug controller */ + portsc = readl(&ehci_regs->port_status[debug_port - 1]); + portsc &= ~PORT_PE; + writel(portsc, &ehci_regs->port_status[debug_port - 1]); + + dbgp_mdelay(100); + + /* Find the debug device and make it device number 127 */ + for (devnum = 0; devnum <= 127; devnum++) { + ret = dbgp_control_msg(devnum, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, + &dbgp_desc, sizeof(dbgp_desc)); + if (ret > 0) + break; + } + if (devnum > 127) { + dbgp_printk("Could not find attached debug device\n"); + goto err; + } + if (ret < 0) { + dbgp_printk("Attached device is not a debug device\n"); + goto err; + } + dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; + + /* Move the device to 127 if it isn't already there */ + if (devnum != USB_DEBUG_DEVNUM) { + ret = dbgp_control_msg(devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dbgp_printk("Could not move attached device to %d\n", + USB_DEBUG_DEVNUM); + goto err; + } + devnum = USB_DEBUG_DEVNUM; + dbgp_printk("debug device renamed to 127\n"); + } + + /* Enable the debug interface */ + ret = dbgp_control_msg(USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); + if (ret < 0) { + dbgp_printk(" Could not enable the debug device\n"); + goto err; + } + dbgp_printk("debug interface enabled\n"); + + /* Perform a small write to get the even/odd data state in sync + */ + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); + if (ret < 0) { + dbgp_printk("dbgp_bulk_write failed: %d\n", ret); + goto err; + } + dbgp_printk("small write doned\n"); + + return 0; +err: + /* Things didn't work so remove my claim */ + ctrl = readl(&ehci_debug->control); + ctrl &= ~(DBGP_CLAIM | DBGP_OUT); + writel(ctrl, &ehci_debug->control); + return -1; + +next_debug_port: + port_map_tried |= (1<<(debug_port - 1)); + new_debug_port = ((debug_port-1+1)%n_ports) + 1; + if (port_map_tried != ((1<<n_ports) - 1)) { + set_debug_port(new_debug_port); + goto try_next_port; + } + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + + return -1; +} + +static int __init early_dbgp_init(char *s) +{ + u32 debug_port, bar, offset; + u32 bus, slot, func, cap; + void __iomem *ehci_bar; + u32 dbgp_num; + u32 bar_val; + char *e; + int ret; + u8 byte; + + if (!early_pci_allowed()) + return -1; + + dbgp_num = 0; + if (*s) + dbgp_num = simple_strtoul(s, &e, 10); + dbgp_printk("dbgp_num: %d\n", dbgp_num); + + cap = find_dbgp(dbgp_num, &bus, &slot, &func); + if (!cap) + return -1; + + dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, + func); + + debug_port = read_pci_config(bus, slot, func, cap); + bar = (debug_port >> 29) & 0x7; + bar = (bar * 4) + 0xc; + offset = (debug_port >> 16) & 0xfff; + dbgp_printk("bar: %02x offset: %03x\n", bar, offset); + if (bar != PCI_BASE_ADDRESS_0) { + dbgp_printk("only debug ports on bar 1 handled.\n"); + + return -1; + } + + bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); + if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { + dbgp_printk("only simple 32bit mmio bars supported\n"); + + return -1; + } + + /* double check if the mem space is enabled */ + byte = read_pci_config_byte(bus, slot, func, 0x04); + if (!(byte & 0x2)) { + byte |= 0x02; + write_pci_config_byte(bus, slot, func, 0x04, byte); + dbgp_printk("mmio for ehci enabled\n"); + } + + /* + * FIXME I don't have the bar size so just guess PAGE_SIZE is more + * than enough. 1K is the biggest I have seen. + */ + set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); + ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); + ehci_bar += bar_val & ~PAGE_MASK; + dbgp_printk("ehci_bar: %p\n", ehci_bar); + + ehci_caps = ehci_bar; + ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_debug = ehci_bar + offset; + ehci_dev.bus = bus; + ehci_dev.slot = slot; + ehci_dev.func = func; + + detect_set_debug_port(); + + ret = ehci_setup(); + if (ret < 0) { + dbgp_printk("ehci_setup failed\n"); + ehci_debug = NULL; + + return -1; + } + + return 0; +} + +static void early_dbgp_write(struct console *con, const char *str, u32 n) +{ + int chunk, ret; + + if (!ehci_debug) + return; + while (n > 0) { + chunk = n; + if (chunk > DBGP_MAX_PACKET) + chunk = DBGP_MAX_PACKET; + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, + dbgp_endpoint_out, str, chunk); + str += chunk; + n -= chunk; + } +} + +static struct console early_dbgp_console = { + .name = "earlydbg", + .write = early_dbgp_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + /* Console interface to a host file on AMD's SimNow! */ static int simnow_fd; @@ -165,6 +889,7 @@ enum { static noinline long simnow(long cmd, long a, long b, long c) { long ret; + asm volatile("cpuid" : "=a" (ret) : "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2)); @@ -174,6 +899,7 @@ static noinline long simnow(long cmd, long a, long b, long c) static void __init simnow_init(char *str) { char *fn = "klog"; + if (*str == '=') fn = ++str; /* error ignored */ @@ -194,9 +920,9 @@ static struct console simnow_console = { /* Direct interface for emergencies */ static struct console *early_console = &early_vga_console; -static int early_console_initialized; +static int __initdata early_console_initialized; -void early_printk(const char *fmt, ...) +asmlinkage void early_printk(const char *fmt, ...) { char buf[512]; int n; @@ -208,10 +934,11 @@ void early_printk(const char *fmt, ...) va_end(ap); } -static int __initdata keep_early; static int __init setup_early_printk(char *buf) { + int keep_early; + if (!buf) return 0; @@ -219,8 +946,7 @@ static int __init setup_early_printk(char *buf) return 0; early_console_initialized = 1; - if (strstr(buf, "keep")) - keep_early = 1; + keep_early = (strstr(buf, "keep") != NULL); if (!strncmp(buf, "serial", 6)) { early_serial_init(buf + 6); @@ -238,6 +964,17 @@ static int __init setup_early_printk(char *buf) simnow_init(buf + 6); early_console = &simnow_console; keep_early = 1; +#ifdef CONFIG_EARLY_PRINTK_DBGP + } else if (!strncmp(buf, "dbgp", 4)) { + if (early_dbgp_init(buf+4) < 0) + return 0; + early_console = &early_dbgp_console; + /* + * usb subsys will reset ehci controller, so don't keep + * that early console + */ + keep_early = 0; +#endif #ifdef CONFIG_HVC_XEN } else if (!strncmp(buf, "xen", 3)) { early_console = &xenboot_console; @@ -251,4 +988,5 @@ static int __init setup_early_printk(char *buf) register_console(early_console); return 0; } + early_param("earlyprintk", setup_early_printk); diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 77d424cf68b..945a31cdd81 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -64,6 +64,17 @@ static int __init setup_noefi(char *arg) } early_param("noefi", setup_noefi); +int add_efi_memmap; +EXPORT_SYMBOL(add_efi_memmap); + +static int __init setup_add_efi_memmap(char *arg) +{ + add_efi_memmap = 1; + return 0; +} +early_param("add_efi_memmap", setup_add_efi_memmap); + + static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) { return efi_call_virt2(get_time, tm, tc); @@ -213,6 +224,50 @@ unsigned long efi_get_time(void) eft.minute, eft.second); } +/* + * Tell the kernel about the EFI memory map. This might include + * more than the max 128 entries that can fit in the e820 legacy + * (zeropage) memory map. + */ + +static void __init do_add_efi_memmap(void) +{ + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + efi_memory_desc_t *md = p; + unsigned long long start = md->phys_addr; + unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + int e820_type; + + if (md->attribute & EFI_MEMORY_WB) + e820_type = E820_RAM; + else + e820_type = E820_RESERVED; + e820_add_region(start, size, e820_type); + } + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); +} + +void __init efi_reserve_early(void) +{ + unsigned long pmap; + +#ifdef CONFIG_X86_32 + pmap = boot_params.efi_info.efi_memmap; +#else + pmap = (boot_params.efi_info.efi_memmap | + ((__u64)boot_params.efi_info.efi_memmap_hi<<32)); +#endif + memmap.phys_map = (void *)pmap; + memmap.nr_map = boot_params.efi_info.efi_memmap_size / + boot_params.efi_info.efi_memdesc_size; + memmap.desc_version = boot_params.efi_info.efi_memdesc_version; + memmap.desc_size = boot_params.efi_info.efi_memdesc_size; + reserve_early(pmap, pmap + memmap.nr_map * memmap.desc_size, + "EFI memmap"); +} + #if EFI_DEBUG static void __init print_efi_memmap(void) { @@ -244,19 +299,11 @@ void __init efi_init(void) #ifdef CONFIG_X86_32 efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab; - memmap.phys_map = (void *)boot_params.efi_info.efi_memmap; #else efi_phys.systab = (efi_system_table_t *) (boot_params.efi_info.efi_systab | ((__u64)boot_params.efi_info.efi_systab_hi<<32)); - memmap.phys_map = (void *) - (boot_params.efi_info.efi_memmap | - ((__u64)boot_params.efi_info.efi_memmap_hi<<32)); #endif - memmap.nr_map = boot_params.efi_info.efi_memmap_size / - boot_params.efi_info.efi_memdesc_size; - memmap.desc_version = boot_params.efi_info.efi_memdesc_version; - memmap.desc_size = boot_params.efi_info.efi_memdesc_size; efi.systab = early_ioremap((unsigned long)efi_phys.systab, sizeof(efi_system_table_t)); @@ -367,9 +414,13 @@ void __init efi_init(void) if (memmap.map == NULL) printk(KERN_ERR "Could not map the EFI memory map!\n"); memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); + if (memmap.desc_size != sizeof(efi_memory_desc_t)) - printk(KERN_WARNING "Kernel-defined memdesc" - "doesn't match the one from EFI!\n"); + printk(KERN_WARNING + "Kernel-defined memdesc doesn't match the one from EFI!\n"); + + if (add_efi_memmap) + do_add_efi_memmap(); /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; @@ -424,7 +475,7 @@ void __init efi_enter_virtual_mode(void) size = md->num_pages << EFI_PAGE_SHIFT; end = md->phys_addr + size; - if (PFN_UP(end) <= max_pfn_mapped) + if (PFN_UP(end) <= max_low_pfn_mapped) va = __va(md->phys_addr); else va = efi_ioremap(md->phys_addr, size); diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c index 5d23d85624d..5cab48ee61a 100644 --- a/arch/x86/kernel/efi_32.c +++ b/arch/x86/kernel/efi_32.c @@ -49,13 +49,13 @@ void efi_call_phys_prelog(void) local_irq_save(efi_rt_eflags); /* - * If I don't have PSE, I should just duplicate two entries in page - * directory. If I have PSE, I just need to duplicate one entry in + * If I don't have PAE, I should just duplicate two entries in page + * directory. If I have PAE, I just need to duplicate one entry in * page directory. */ - cr4 = read_cr4(); + cr4 = read_cr4_safe(); - if (cr4 & X86_CR4_PSE) { + if (cr4 & X86_CR4_PAE) { efi_bak_pg_dir_pointer[0].pgd = swapper_pg_dir[pgd_index(0)].pgd; swapper_pg_dir[0].pgd = @@ -91,9 +91,9 @@ void efi_call_phys_epilog(void) gdt_descr.size = GDT_SIZE - 1; load_gdt(&gdt_descr); - cr4 = read_cr4(); + cr4 = read_cr4_safe(); - if (cr4 & X86_CR4_PSE) { + if (cr4 & X86_CR4_PAE) { swapper_pg_dir[pgd_index(0)].pgd = efi_bak_pg_dir_pointer[0].pgd; } else { diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index d0060fdccca..652c5287215 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -97,13 +97,7 @@ void __init efi_call_phys_epilog(void) early_runtime_code_mapping_set_exec(0); } -void __init efi_reserve_bootmem(void) -{ - reserve_bootmem_generic((unsigned long)memmap.phys_map, - memmap.nr_map * memmap.desc_size); -} - -void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size) +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { static unsigned pages_mapped __initdata; unsigned i, pages; diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index c778e4fa55a..109792bc7cf 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -51,14 +51,25 @@ #include <asm/percpu.h> #include <asm/dwarf2.h> #include <asm/processor-flags.h> -#include "irq_vectors.h" +#include <asm/ftrace.h> +#include <asm/irq_vectors.h> + +/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ +#include <linux/elf-em.h> +#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) +#define __AUDIT_ARCH_LE 0x40000000 + +#ifndef CONFIG_AUDITSYSCALL +#define sysenter_audit syscall_trace_entry +#define sysexit_audit syscall_exit_work +#endif /* * We use macros for low-level operations which need to be overridden * for paravirtualization. The following will never clobber any registers: * INTERRUPT_RETURN (aka. "iret") * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") - * ENABLE_INTERRUPTS_SYSCALL_RET (aka "sti; sysexit"). + * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). * * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). @@ -331,8 +342,9 @@ sysenter_past_esp: GET_THREAD_INFO(%ebp) /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) - jnz syscall_trace_entry + testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) + jnz sysenter_audit +sysenter_do_call: cmpl $(nr_syscalls), %eax jae syscall_badsys call *sys_call_table(,%eax,4) @@ -342,14 +354,54 @@ sysenter_past_esp: TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx testw $_TIF_ALLWORK_MASK, %cx - jne syscall_exit_work + jne sysexit_audit +sysenter_exit: /* if something modifies registers it must also disable sysexit */ movl PT_EIP(%esp), %edx movl PT_OLDESP(%esp), %ecx xorl %ebp,%ebp TRACE_IRQS_ON 1: mov PT_FS(%esp), %fs - ENABLE_INTERRUPTS_SYSCALL_RET + ENABLE_INTERRUPTS_SYSEXIT + +#ifdef CONFIG_AUDITSYSCALL +sysenter_audit: + testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + jnz syscall_trace_entry + addl $4,%esp + CFI_ADJUST_CFA_OFFSET -4 + /* %esi already in 8(%esp) 6th arg: 4th syscall arg */ + /* %edx already in 4(%esp) 5th arg: 3rd syscall arg */ + /* %ecx already in 0(%esp) 4th arg: 2nd syscall arg */ + movl %ebx,%ecx /* 3rd arg: 1st syscall arg */ + movl %eax,%edx /* 2nd arg: syscall number */ + movl $AUDIT_ARCH_I386,%eax /* 1st arg: audit arch */ + call audit_syscall_entry + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + movl PT_EAX(%esp),%eax /* reload syscall number */ + jmp sysenter_do_call + +sysexit_audit: + testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx + jne syscall_exit_work + TRACE_IRQS_ON + ENABLE_INTERRUPTS(CLBR_ANY) + movl %eax,%edx /* second arg, syscall return value */ + cmpl $0,%eax /* is it < 0? */ + setl %al /* 1 if so, 0 if not */ + movzbl %al,%eax /* zero-extend that */ + inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ + call audit_syscall_exit + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + movl TI_flags(%ebp), %ecx + testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx + jne syscall_exit_work + movl PT_EAX(%esp),%eax /* reload syscall return value */ + jmp sysenter_exit +#endif + CFI_ENDPROC .pushsection .fixup,"ax" 2: movl $0,PT_FS(%esp) @@ -369,7 +421,7 @@ ENTRY(system_call) GET_THREAD_INFO(%ebp) # system call tracing in operation / emulation /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) jnz syscall_trace_entry cmpl $(nr_syscalls), %eax jae syscall_badsys @@ -382,10 +434,6 @@ syscall_exit: # setting need_resched or sigpending # between sampling and the iret TRACE_IRQS_OFF - testl $X86_EFLAGS_TF,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit - jz no_singlestep - orl $_TIF_SINGLESTEP,TI_flags(%ebp) -no_singlestep: movl TI_flags(%ebp), %ecx testw $_TIF_ALLWORK_MASK, %cx # current->work jne syscall_exit_work @@ -513,12 +561,8 @@ END(work_pending) syscall_trace_entry: movl $-ENOSYS,PT_EAX(%esp) movl %esp, %eax - xorl %edx,%edx - call do_syscall_trace - cmpl $0, %eax - jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU, - # so must skip actual syscall - movl PT_ORIG_EAX(%esp), %eax + call syscall_trace_enter + /* What it returned is what we'll actually use. */ cmpl $(nr_syscalls), %eax jnae syscall_call jmp syscall_exit @@ -527,14 +571,13 @@ END(syscall_trace_entry) # perform syscall exit tracing ALIGN syscall_exit_work: - testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl + testb $_TIF_WORK_SYSCALL_EXIT, %cl jz work_pending TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call + ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call # schedule() instead movl %esp, %eax - movl $1, %edx - call do_syscall_trace + call syscall_trace_leave jmp resume_userspace END(syscall_exit_work) CFI_ENDPROC @@ -874,10 +917,10 @@ ENTRY(native_iret) .previous END(native_iret) -ENTRY(native_irq_enable_syscall_ret) +ENTRY(native_irq_enable_sysexit) sti sysexit -END(native_irq_enable_syscall_ret) +END(native_irq_enable_sysexit) #endif KPROBE_ENTRY(int3) @@ -1023,7 +1066,9 @@ ENDPROC(kernel_thread_helper) ENTRY(xen_sysenter_target) RING0_INT_FRAME addl $5*4, %esp /* remove xen-provided frame */ + CFI_ADJUST_CFA_OFFSET -5*4 jmp sysenter_past_esp + CFI_ENDPROC ENTRY(xen_hypervisor_callback) CFI_STARTPROC @@ -1110,6 +1155,77 @@ ENDPROC(xen_failsafe_callback) #endif /* CONFIG_XEN */ +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE + +ENTRY(mcount) + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + subl $MCOUNT_INSN_SIZE, %eax + +.globl mcount_call +mcount_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax + + ret +END(mcount) + +ENTRY(ftrace_caller) + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + subl $MCOUNT_INSN_SIZE, %eax + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax + +.globl ftrace_stub +ftrace_stub: + ret +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + +ENTRY(mcount) + cmpl $ftrace_stub, ftrace_trace_function + jnz trace +.globl ftrace_stub +ftrace_stub: + ret + + /* taken from glibc */ +trace: + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + subl $MCOUNT_INSN_SIZE, %eax + + call *ftrace_trace_function + + popl %edx + popl %ecx + popl %eax + + jmp ftrace_stub +END(mcount) +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FTRACE */ + .section .rodata,"a" #include "syscall_table_32.S" diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a..cf3a0b2d005 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -51,16 +51,127 @@ #include <asm/page.h> #include <asm/irqflags.h> #include <asm/paravirt.h> +#include <asm/ftrace.h> + +/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ +#include <linux/elf-em.h> +#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define __AUDIT_ARCH_64BIT 0x80000000 +#define __AUDIT_ARCH_LE 0x40000000 .code64 +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(mcount) + + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + subq $MCOUNT_INSN_SIZE, %rdi + +.globl mcount_call +mcount_call: + call ftrace_stub + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + + retq +END(mcount) + +ENTRY(ftrace_caller) + + /* taken from glibc */ + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + movq 8(%rbp), %rsi + subq $MCOUNT_INSN_SIZE, %rdi + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + +.globl ftrace_stub +ftrace_stub: + retq +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ +ENTRY(mcount) + cmpq $ftrace_stub, ftrace_trace_function + jnz trace +.globl ftrace_stub +ftrace_stub: + retq + +trace: + /* taken from glibc */ + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + movq 8(%rbp), %rsi + subq $MCOUNT_INSN_SIZE, %rdi + + call *ftrace_trace_function + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + + jmp ftrace_stub +END(mcount) +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FTRACE */ + #ifndef CONFIG_PREEMPT #define retint_kernel retint_restore_args #endif #ifdef CONFIG_PARAVIRT -ENTRY(native_irq_enable_syscall_ret) - movq %gs:pda_oldrsp,%rsp +ENTRY(native_usergs_sysret64) swapgs sysretq #endif /* CONFIG_PARAVIRT */ @@ -104,7 +215,7 @@ ENTRY(native_irq_enable_syscall_ret) .macro FAKE_STACK_FRAME child_rip /* push in order ss, rsp, eflags, cs, rip */ xorl %eax, %eax - pushq %rax /* ss */ + pushq $__KERNEL_DS /* ss */ CFI_ADJUST_CFA_OFFSET 8 /*CFI_REL_OFFSET ss,0*/ pushq %rax /* rsp */ @@ -164,18 +275,18 @@ ENTRY(native_irq_enable_syscall_ret) ENTRY(ret_from_fork) CFI_DEFAULT_STACK push kernel_eflags(%rip) - CFI_ADJUST_CFA_OFFSET 4 + CFI_ADJUST_CFA_OFFSET 8 popf # reset kernel eflags - CFI_ADJUST_CFA_OFFSET -4 + CFI_ADJUST_CFA_OFFSET -8 call schedule_tail GET_THREAD_INFO(%rcx) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx) + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx) jnz rff_trace rff_action: RESTORE_REST testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread? je int_ret_from_sys_call - testl $_TIF_IA32,threadinfo_flags(%rcx) + testl $_TIF_IA32,TI_flags(%rcx) jnz int_ret_from_sys_call RESTORE_TOP_OF_STACK %rdi,ARGOFFSET jmp ret_from_sys_call @@ -244,8 +355,9 @@ ENTRY(system_call_after_swapgs) movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET GET_THREAD_INFO(%rcx) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx) jnz tracesys +system_call_fastpath: cmpq $__NR_syscall_max,%rax ja badsys movq %r10,%rcx @@ -263,7 +375,7 @@ sysret_check: GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - movl threadinfo_flags(%rcx),%edx + movl TI_flags(%rcx),%edx andl %edi,%edx jnz sysret_careful CFI_REMEMBER_STATE @@ -275,7 +387,8 @@ sysret_check: CFI_REGISTER rip,rcx RESTORE_ARGS 0,-ARG_SKIP,1 /*CFI_REGISTER rflags,r11*/ - ENABLE_INTERRUPTS_SYSCALL_RET + movq %gs:pda_oldrsp, %rsp + USERGS_SYSRET64 CFI_RESTORE_STATE /* Handle reschedules */ @@ -296,16 +409,16 @@ sysret_careful: sysret_signal: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - testl $_TIF_DO_NOTIFY_MASK,%edx - jz 1f - - /* Really a signal */ +#ifdef CONFIG_AUDITSYSCALL + bt $TIF_SYSCALL_AUDIT,%edx + jc sysret_audit +#endif /* edx: work flags (arg3) */ leaq do_notify_resume(%rip),%rax leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1 xorl %esi,%esi # oldset -> arg2 call ptregscall_common -1: movl $_TIF_NEED_RESCHED,%edi + movl $_TIF_WORK_MASK,%edi /* Use IRET because user could have changed frame. This works because ptregscall_common has called FIXUP_TOP_OF_STACK. */ DISABLE_INTERRUPTS(CLBR_NONE) @@ -316,14 +429,56 @@ badsys: movq $-ENOSYS,RAX-ARGOFFSET(%rsp) jmp ret_from_sys_call +#ifdef CONFIG_AUDITSYSCALL + /* + * Fast path for syscall audit without full syscall trace. + * We just call audit_syscall_entry() directly, and then + * jump back to the normal fast path. + */ +auditsys: + movq %r10,%r9 /* 6th arg: 4th syscall arg */ + movq %rdx,%r8 /* 5th arg: 3rd syscall arg */ + movq %rsi,%rcx /* 4th arg: 2nd syscall arg */ + movq %rdi,%rdx /* 3rd arg: 1st syscall arg */ + movq %rax,%rsi /* 2nd arg: syscall number */ + movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */ + call audit_syscall_entry + LOAD_ARGS 0 /* reload call-clobbered registers */ + jmp system_call_fastpath + + /* + * Return fast path for syscall audit. Call audit_syscall_exit() + * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT + * masked off. + */ +sysret_audit: + movq %rax,%rsi /* second arg, syscall return value */ + cmpq $0,%rax /* is it < 0? */ + setl %al /* 1 if so, 0 if not */ + movzbl %al,%edi /* zero-extend that into %edi */ + inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ + call audit_syscall_exit + movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi + jmp sysret_check +#endif /* CONFIG_AUDITSYSCALL */ + /* Do syscall tracing */ tracesys: +#ifdef CONFIG_AUDITSYSCALL + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx) + jz auditsys +#endif SAVE_REST movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ FIXUP_TOP_OF_STACK %rdi movq %rsp,%rdi call syscall_trace_enter - LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ + /* + * Reload arg registers from stack in case ptrace changed them. + * We don't reload %rax because syscall_trace_enter() returned + * the value it wants us to use in the table lookup. + */ + LOAD_ARGS ARGOFFSET, 1 RESTORE_REST cmpq $__NR_syscall_max,%rax ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */ @@ -337,6 +492,7 @@ tracesys: * Has correct top of stack, but partial stack frame. */ .globl int_ret_from_sys_call + .globl int_with_check int_ret_from_sys_call: DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF @@ -347,10 +503,10 @@ int_ret_from_sys_call: int_with_check: LOCKDEP_SYS_EXIT_IRQ GET_THREAD_INFO(%rcx) - movl threadinfo_flags(%rcx),%edx + movl TI_flags(%rcx),%edx andl %edi,%edx jnz int_careful - andl $~TS_COMPAT,threadinfo_status(%rcx) + andl $~TS_COMPAT,TI_status(%rcx) jmp retint_swapgs /* Either reschedule or signal or syscall exit tracking needed. */ @@ -376,7 +532,7 @@ int_very_careful: ENABLE_INTERRUPTS(CLBR_NONE) SAVE_REST /* Check for syscall exit trace */ - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx + testl $_TIF_WORK_SYSCALL_EXIT,%edx jz int_signal pushq %rdi CFI_ADJUST_CFA_OFFSET 8 @@ -384,7 +540,7 @@ int_very_careful: call syscall_trace_leave popq %rdi CFI_ADJUST_CFA_OFFSET -8 - andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi + andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi jmp int_restore_rest int_signal: @@ -393,7 +549,7 @@ int_signal: movq %rsp,%rdi # &ptregs -> arg1 xorl %esi,%esi # oldset -> arg2 call do_notify_resume -1: movl $_TIF_NEED_RESCHED,%edi +1: movl $_TIF_WORK_MASK,%edi int_restore_rest: RESTORE_REST DISABLE_INTERRUPTS(CLBR_NONE) @@ -420,7 +576,6 @@ END(\label) PTREGSCALL stub_clone, sys_clone, %r8 PTREGSCALL stub_fork, sys_fork, %rdi PTREGSCALL stub_vfork, sys_vfork, %rdi - PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx PTREGSCALL stub_iopl, sys_iopl, %rsi @@ -559,7 +714,7 @@ retint_with_reschedule: movl $_TIF_WORK_MASK,%edi retint_check: LOCKDEP_SYS_EXIT_IRQ - movl threadinfo_flags(%rcx),%edx + movl TI_flags(%rcx),%edx andl %edi,%edx CFI_REMEMBER_STATE jnz retint_careful @@ -647,17 +802,16 @@ retint_signal: RESTORE_REST DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - movl $_TIF_NEED_RESCHED,%edi GET_THREAD_INFO(%rcx) - jmp retint_check + jmp retint_with_reschedule #ifdef CONFIG_PREEMPT /* Returning to kernel space. Check if we need preemption */ /* rcx: threadinfo. interrupts off. */ ENTRY(retint_kernel) - cmpl $0,threadinfo_preempt_count(%rcx) + cmpl $0,TI_preempt_count(%rcx) jnz retint_restore_args - bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx) + bt $TIF_NEED_RESCHED,TI_flags(%rcx) jnc retint_restore_args bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */ jnc retint_restore_args @@ -711,6 +865,9 @@ END(invalidate_interrupt\num) ENTRY(call_function_interrupt) apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt END(call_function_interrupt) +ENTRY(call_function_single_interrupt) + apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt +END(call_function_single_interrupt) ENTRY(irq_move_cleanup_interrupt) apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt END(irq_move_cleanup_interrupt) @@ -720,6 +877,10 @@ ENTRY(apic_timer_interrupt) apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt END(apic_timer_interrupt) +ENTRY(uv_bau_message_intr1) + apicinterrupt 220,uv_bau_message_interrupt +END(uv_bau_message_intr1) + ENTRY(error_interrupt) apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt END(error_interrupt) @@ -733,6 +894,7 @@ END(spurious_interrupt) */ .macro zeroentry sym INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 /* push error code/oldrax */ CFI_ADJUST_CFA_OFFSET 8 pushq %rax /* push real oldrax to the rdi slot */ @@ -745,6 +907,7 @@ END(spurious_interrupt) .macro errorentry sym XCPT_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq %rax CFI_ADJUST_CFA_OFFSET 8 CFI_REL_OFFSET rax,0 @@ -814,7 +977,7 @@ paranoid_restore\trace: jmp irq_return paranoid_userspace\trace: GET_THREAD_INFO(%rcx) - movl threadinfo_flags(%rcx),%ebx + movl TI_flags(%rcx),%ebx andl $_TIF_WORK_MASK,%ebx jz paranoid_swapgs\trace movq %rsp,%rdi /* &pt_regs */ @@ -912,7 +1075,7 @@ error_exit: testl %eax,%eax jne retint_kernel LOCKDEP_SYS_EXIT_IRQ - movl threadinfo_flags(%rcx),%edx + movl TI_flags(%rcx),%edx movl $_TIF_WORK_MASK,%edi andl %edi,%edx jnz retint_careful @@ -926,11 +1089,11 @@ error_kernelspace: iret run with kernel gs again, so don't set the user space flag. B stepping K8s sometimes report an truncated RIP for IRET exceptions returning to compat mode. Check for these here too. */ - leaq irq_return(%rip),%rbp - cmpq %rbp,RIP(%rsp) + leaq irq_return(%rip),%rcx + cmpq %rcx,RIP(%rsp) je error_swapgs - movl %ebp,%ebp /* zero extend */ - cmpq %rbp,RIP(%rsp) + movl %ecx,%ecx /* zero extend */ + cmpq %rcx,RIP(%rsp) je error_swapgs cmpq $gs_change,RIP(%rsp) je error_swapgs @@ -939,7 +1102,7 @@ KPROBE_END(error_entry) /* Reload gs selector with exception handling */ /* edi: new selector */ -ENTRY(load_gs_index) +ENTRY(native_load_gs_index) CFI_STARTPROC pushf CFI_ADJUST_CFA_OFFSET 8 @@ -953,7 +1116,7 @@ gs_change: CFI_ADJUST_CFA_OFFSET -8 ret CFI_ENDPROC -ENDPROC(load_gs_index) +ENDPROC(native_load_gs_index) .section __ex_table,"a" .align 8 @@ -1075,6 +1238,7 @@ END(device_not_available) /* runs on exception stack */ KPROBE_ENTRY(debug) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_debug, DEBUG_STACK @@ -1084,6 +1248,7 @@ KPROBE_END(debug) /* runs on exception stack */ KPROBE_ENTRY(nmi) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $-1 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_nmi, 0, 0 @@ -1097,6 +1262,7 @@ KPROBE_END(nmi) KPROBE_ENTRY(int3) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_int3, DEBUG_STACK @@ -1120,13 +1286,10 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME paranoidentry do_double_fault jmp paranoid_exit1 CFI_ENDPROC @@ -1143,6 +1306,7 @@ END(segment_not_present) /* runs on exception stack */ ENTRY(stack_segment) XCPT_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME paranoidentry do_stack_segment jmp paranoid_exit1 CFI_ENDPROC @@ -1168,6 +1332,7 @@ END(spurious_interrupt_bug) /* runs on exception stack */ ENTRY(machine_check) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_machine_check @@ -1202,3 +1367,103 @@ KPROBE_ENTRY(ignore_sysret) sysret CFI_ENDPROC ENDPROC(ignore_sysret) + +#ifdef CONFIG_XEN +ENTRY(xen_hypervisor_callback) + zeroentry xen_do_hypervisor_callback +END(xen_hypervisor_callback) + +/* +# A note on the "critical region" in our callback handler. +# We want to avoid stacking callback handlers due to events occurring +# during handling of the last event. To do this, we keep events disabled +# until we've done all processing. HOWEVER, we must enable events before +# popping the stack frame (can't be done atomically) and so it would still +# be possible to get enough handler activations to overflow the stack. +# Although unlikely, bugs of that kind are hard to track down, so we'd +# like to avoid the possibility. +# So, on entry to the handler we detect whether we interrupted an +# existing activation in its critical region -- if so, we pop the current +# activation and restart the handler using the previous one. +*/ +ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) + CFI_STARTPROC +/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will + see the correct pointer to the pt_regs */ + movq %rdi, %rsp # we don't return, adjust the stack frame + CFI_ENDPROC + CFI_DEFAULT_STACK +11: incl %gs:pda_irqcount + movq %rsp,%rbp + CFI_DEF_CFA_REGISTER rbp + cmovzq %gs:pda_irqstackptr,%rsp + pushq %rbp # backlink for old unwinder + call xen_evtchn_do_upcall + popq %rsp + CFI_DEF_CFA_REGISTER rsp + decl %gs:pda_irqcount + jmp error_exit + CFI_ENDPROC +END(do_hypervisor_callback) + +/* +# Hypervisor uses this for application faults while it executes. +# We get here for two reasons: +# 1. Fault while reloading DS, ES, FS or GS +# 2. Fault while executing IRET +# Category 1 we do not need to fix up as Xen has already reloaded all segment +# registers that could be reloaded and zeroed the others. +# Category 2 we fix up by killing the current process. We cannot use the +# normal Linux return path in this case because if we use the IRET hypercall +# to pop the stack frame we end up in an infinite loop of failsafe callbacks. +# We distinguish between categories by comparing each saved segment register +# with its current contents: any discrepancy means we in category 1. +*/ +ENTRY(xen_failsafe_callback) + framesz = (RIP-0x30) /* workaround buggy gas */ + _frame framesz + CFI_REL_OFFSET rcx, 0 + CFI_REL_OFFSET r11, 8 + movw %ds,%cx + cmpw %cx,0x10(%rsp) + CFI_REMEMBER_STATE + jne 1f + movw %es,%cx + cmpw %cx,0x18(%rsp) + jne 1f + movw %fs,%cx + cmpw %cx,0x20(%rsp) + jne 1f + movw %gs,%cx + cmpw %cx,0x28(%rsp) + jne 1f + /* All segments match their saved values => Category 2 (Bad IRET). */ + movq (%rsp),%rcx + CFI_RESTORE rcx + movq 8(%rsp),%r11 + CFI_RESTORE r11 + addq $0x30,%rsp + CFI_ADJUST_CFA_OFFSET -0x30 + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + pushq %r11 + CFI_ADJUST_CFA_OFFSET 8 + pushq %rcx + CFI_ADJUST_CFA_OFFSET 8 + jmp general_protection + CFI_RESTORE_STATE +1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ + movq (%rsp),%rcx + CFI_RESTORE rcx + movq 8(%rsp),%r11 + CFI_RESTORE r11 + addq $0x30,%rsp + CFI_ADJUST_CFA_OFFSET -0x30 + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + SAVE_ALL + jmp error_exit + CFI_ENDPROC +END(xen_failsafe_callback) + +#endif /* CONFIG_XEN */ diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c new file mode 100644 index 00000000000..849e5cd485b --- /dev/null +++ b/arch/x86/kernel/es7000_32.c @@ -0,0 +1,345 @@ +/* + * Written by: Garry Forsgren, Unisys Corporation + * Natalie Protasevich, Unisys Corporation + * This file contains the code to configure and interface + * with Unisys ES7000 series hardware system manager. + * + * Copyright (c) 2003 Unisys Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Contact information: Unisys Corporation, Township Line & Union Meeting + * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: + * + * http://www.unisys.com + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <asm/io.h> +#include <asm/nmi.h> +#include <asm/smp.h> +#include <asm/apicdef.h> +#include <mach_mpparse.h> + +/* + * ES7000 chipsets + */ + +#define NON_UNISYS 0 +#define ES7000_CLASSIC 1 +#define ES7000_ZORRO 2 + + +#define MIP_REG 1 +#define MIP_PSAI_REG 4 + +#define MIP_BUSY 1 +#define MIP_SPIN 0xf0000 +#define MIP_VALID 0x0100000000000000ULL +#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff) + +#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff) + +struct mip_reg_info { + unsigned long long mip_info; + unsigned long long delivery_info; + unsigned long long host_reg; + unsigned long long mip_reg; +}; + +struct part_info { + unsigned char type; + unsigned char length; + unsigned char part_id; + unsigned char apic_mode; + unsigned long snum; + char ptype[16]; + char sname[64]; + char pname[64]; +}; + +struct psai { + unsigned long long entry_type; + unsigned long long addr; + unsigned long long bep_addr; +}; + +struct es7000_mem_info { + unsigned char type; + unsigned char length; + unsigned char resv[6]; + unsigned long long start; + unsigned long long size; +}; + +struct es7000_oem_table { + unsigned long long hdr; + struct mip_reg_info mip; + struct part_info pif; + struct es7000_mem_info shm; + struct psai psai; +}; + +#ifdef CONFIG_ACPI + +struct oem_table { + struct acpi_table_header Header; + u32 OEMTableAddr; + u32 OEMTableSize; +}; + +extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); +#endif + +struct mip_reg { + unsigned long long off_0; + unsigned long long off_8; + unsigned long long off_10; + unsigned long long off_18; + unsigned long long off_20; + unsigned long long off_28; + unsigned long long off_30; + unsigned long long off_38; +}; + +#define MIP_SW_APIC 0x1020b +#define MIP_FUNC(VALUE) (VALUE & 0xff) + +/* + * ES7000 Globals + */ + +static volatile unsigned long *psai = NULL; +static struct mip_reg *mip_reg; +static struct mip_reg *host_reg; +static int mip_port; +static unsigned long mip_addr, host_addr; + +int es7000_plat; + +/* + * GSI override for ES7000 platforms. + */ + +static unsigned int base; + +static int +es7000_rename_gsi(int ioapic, int gsi) +{ + if (es7000_plat == ES7000_ZORRO) + return gsi; + + if (!base) { + int i; + for (i = 0; i < nr_ioapics; i++) + base += nr_ioapic_registers[i]; + } + + if (!ioapic && (gsi < 16)) + gsi += base; + return gsi; +} + +void __init +setup_unisys(void) +{ + /* + * Determine the generation of the ES7000 currently running. + * + * es7000_plat = 1 if the machine is a 5xx ES7000 box + * es7000_plat = 2 if the machine is a x86_64 ES7000 box + * + */ + if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) + es7000_plat = ES7000_ZORRO; + else + es7000_plat = ES7000_CLASSIC; + ioapic_renumber_irq = es7000_rename_gsi; +} + +/* + * Parse the OEM Table + */ + +int __init +parse_unisys_oem (char *oemptr) +{ + int i; + int success = 0; + unsigned char type, size; + unsigned long val; + char *tp = NULL; + struct psai *psaip = NULL; + struct mip_reg_info *mi; + struct mip_reg *host, *mip; + + tp = oemptr; + + tp += 8; + + for (i=0; i <= 6; i++) { + type = *tp++; + size = *tp++; + tp -= 2; + switch (type) { + case MIP_REG: + mi = (struct mip_reg_info *)tp; + val = MIP_RD_LO(mi->host_reg); + host_addr = val; + host = (struct mip_reg *)val; + host_reg = __va(host); + val = MIP_RD_LO(mi->mip_reg); + mip_port = MIP_PORT(mi->mip_info); + mip_addr = val; + mip = (struct mip_reg *)val; + mip_reg = __va(mip); + pr_debug("es7000_mipcfg: host_reg = 0x%lx \n", + (unsigned long)host_reg); + pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n", + (unsigned long)mip_reg); + success++; + break; + case MIP_PSAI_REG: + psaip = (struct psai *)tp; + if (tp != NULL) { + if (psaip->addr) + psai = __va(psaip->addr); + else + psai = NULL; + success++; + } + break; + default: + break; + } + tp += size; + } + + if (success < 2) { + es7000_plat = NON_UNISYS; + } else + setup_unisys(); + return es7000_plat; +} + +#ifdef CONFIG_ACPI +int __init +find_unisys_acpi_oem_table(unsigned long *oem_addr) +{ + struct acpi_table_header *header = NULL; + int i = 0; + while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) { + if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) { + struct oem_table *t = (struct oem_table *)header; + *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr, + t->OEMTableSize); + return 0; + } + } + return -1; +} +#endif + +static void +es7000_spin(int n) +{ + int i = 0; + + while (i++ < n) + rep_nop(); +} + +static int __init +es7000_mip_write(struct mip_reg *mip_reg) +{ + int status = 0; + int spin; + + spin = MIP_SPIN; + while (((unsigned long long)host_reg->off_38 & + (unsigned long long)MIP_VALID) != 0) { + if (--spin <= 0) { + printk("es7000_mip_write: Timeout waiting for Host Valid Flag"); + return -1; + } + es7000_spin(MIP_SPIN); + } + + memcpy(host_reg, mip_reg, sizeof(struct mip_reg)); + outb(1, mip_port); + + spin = MIP_SPIN; + + while (((unsigned long long)mip_reg->off_38 & + (unsigned long long)MIP_VALID) == 0) { + if (--spin <= 0) { + printk("es7000_mip_write: Timeout waiting for MIP Valid Flag"); + return -1; + } + es7000_spin(MIP_SPIN); + } + + status = ((unsigned long long)mip_reg->off_0 & + (unsigned long long)0xffff0000000000ULL) >> 48; + mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 & + (unsigned long long)~MIP_VALID); + return status; +} + +int +es7000_start_cpu(int cpu, unsigned long eip) +{ + unsigned long vect = 0, psaival = 0; + + if (psai == NULL) + return -1; + + vect = ((unsigned long)__pa(eip)/0x1000) << 16; + psaival = (0x1000000 | vect | cpu); + + while (*psai & 0x1000000) + ; + + *psai = psaival; + + return 0; + +} + +void __init +es7000_sw_apic(void) +{ + if (es7000_plat) { + int mip_status; + struct mip_reg es7000_mip_reg; + + printk("ES7000: Enabling APIC mode.\n"); + memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); + es7000_mip_reg.off_0 = MIP_SW_APIC; + es7000_mip_reg.off_38 = (MIP_VALID); + while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) + printk("es7000_sw_apic: command failed, status = %x\n", + mip_status); + return; + } +} diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c new file mode 100644 index 00000000000..ab115cd15fd --- /dev/null +++ b/arch/x86/kernel/ftrace.c @@ -0,0 +1,141 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com> + * + * Thanks goes to Ingo Molnar, for suggesting the idea. + * Mathieu Desnoyers, for suggesting postponing the modifications. + * Arjan van de Ven, for keeping me straight, and explaining to me + * the dangers of modifying code on the run. + */ + +#include <linux/spinlock.h> +#include <linux/hardirq.h> +#include <linux/ftrace.h> +#include <linux/percpu.h> +#include <linux/init.h> +#include <linux/list.h> + +#include <asm/alternative.h> +#include <asm/ftrace.h> + + +/* Long is fine, even if it is only 4 bytes ;-) */ +static long *ftrace_nop; + +union ftrace_code_union { + char code[MCOUNT_INSN_SIZE]; + struct { + char e8; + int offset; + } __attribute__((packed)); +}; + + +static int notrace ftrace_calc_offset(long ip, long addr) +{ + return (int)(addr - ip); +} + +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static union ftrace_code_union calc; + + calc.e8 = 0xe8; + calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr); + + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return calc.code; +} + +notrace int +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned replaced; + unsigned old = *(unsigned *)old_code; /* 4 bytes */ + unsigned new = *(unsigned *)new_code; /* 4 bytes */ + unsigned char newch = new_code[4]; + int faulted = 0; + + /* + * Note: Due to modules and __init, code can + * disappear and change, we need to protect against faulting + * as well as code changing. + * + * No real locking needed, this code is run through + * kstop_machine. + */ + asm volatile ( + "1: lock\n" + " cmpxchg %3, (%2)\n" + " jnz 2f\n" + " movb %b4, 4(%2)\n" + "2:\n" + ".section .fixup, \"ax\"\n" + "3: movl $1, %0\n" + " jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : "=r"(faulted), "=a"(replaced) + : "r"(ip), "r"(new), "c"(newch), + "0"(faulted), "a"(old) + : "memory"); + sync_core(); + + if (replaced != old && replaced != new) + faulted = 2; + + return faulted; +} + +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[MCOUNT_INSN_SIZE], *new; + int ret; + + memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(ip, (unsigned long)func); + ret = ftrace_modify_code(ip, old, new); + + return ret; +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[MCOUNT_INSN_SIZE], *new; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + +int __init ftrace_dyn_arch_init(void *data) +{ + const unsigned char *const *noptable = find_nop_table(); + + /* This is running in kstop_machine */ + + ftrace_mcount_set(data); + + ftrace_nop = (unsigned long *)noptable[MCOUNT_INSN_SIZE]; + + return 0; +} diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c index cbaaf69bedb..6c9bfc9e1e9 100644 --- a/arch/x86/kernel/genapic_64.c +++ b/arch/x86/kernel/genapic_64.c @@ -16,86 +16,63 @@ #include <linux/ctype.h> #include <linux/init.h> #include <linux/hardirq.h> +#include <linux/dmar.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -DEFINE_PER_CPU(int, x2apic_extra_bits); +extern struct genapic apic_flat; +extern struct genapic apic_physflat; +extern struct genapic apic_x2xpic_uv_x; +extern struct genapic apic_x2apic_phys; +extern struct genapic apic_x2apic_cluster; struct genapic __read_mostly *genapic = &apic_flat; -static enum uv_system_type uv_system_type; +static struct genapic *apic_probe[] __initdata = { + &apic_x2apic_uv_x, + &apic_x2apic_phys, + &apic_x2apic_cluster, + &apic_physflat, + NULL, +}; /* * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. */ void __init setup_apic_routing(void) { - if (uv_system_type == UV_NON_UNIQUE_APIC) - genapic = &apic_x2apic_uv_x; - else -#ifdef CONFIG_ACPI - /* - * Quirk: some x86_64 machines can only use physical APIC mode - * regardless of how many processors are present (x86_64 ES7000 - * is an example). - */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && - (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) - genapic = &apic_physflat; - else -#endif - - if (num_possible_cpus() <= 8) - genapic = &apic_flat; - else - genapic = &apic_physflat; + if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) { + if (!intr_remapping_enabled) + genapic = &apic_flat; + } - printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + if (genapic == &apic_flat) { + if (max_physical_apicid >= 8) + genapic = &apic_physflat; + printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + } } /* Same for both flat and physical. */ -void send_IPI_self(int vector) +void apic_send_IPI_self(int vector) { __send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL); } int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strcmp(oem_id, "SGI")) { - if (!strcmp(oem_table_id, "UVL")) - uv_system_type = UV_LEGACY_APIC; - else if (!strcmp(oem_table_id, "UVX")) - uv_system_type = UV_X2APIC; - else if (!strcmp(oem_table_id, "UVH")) - uv_system_type = UV_NON_UNIQUE_APIC; + int i; + + for (i = 0; apic_probe[i]; ++i) { + if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { + genapic = apic_probe[i]; + printk(KERN_INFO "Setting APIC routing to %s.\n", + genapic->name); + return 1; + } } return 0; } - -unsigned int read_apic_id(void) -{ - unsigned int id; - - WARN_ON(preemptible() && num_online_cpus() > 1); - id = apic_read(APIC_ID); - if (uv_system_type >= UV_X2APIC) - id |= __get_cpu_var(x2apic_extra_bits); - return id; -} - -enum uv_system_type get_uv_system_type(void) -{ - return uv_system_type; -} - -int is_uv_system(void) -{ - return uv_system_type != UV_NONE; -} diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c index 1a9c68845ee..9eca5ba7a6b 100644 --- a/arch/x86/kernel/genapic_flat_64.c +++ b/arch/x86/kernel/genapic_flat_64.c @@ -15,9 +15,20 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/hardirq.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> +#include <mach_apicdef.h> + +#ifdef CONFIG_ACPI +#include <acpi/acpi_bus.h> +#endif + +static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + return 1; +} static cpumask_t flat_target_cpus(void) { @@ -95,9 +106,33 @@ static void flat_send_IPI_all(int vector) __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); } +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = (((x)>>24) & 0xFFu); + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = ((id & 0xFFu)<<24); + return x; +} + +static unsigned int read_xapic_id(void) +{ + unsigned int id; + + id = get_apic_id(apic_read(APIC_ID)); + return id; +} + static int flat_apic_id_registered(void) { - return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map); + return physid_isset(read_xapic_id(), phys_cpu_present_map); } static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask) @@ -112,6 +147,7 @@ static unsigned int phys_pkg_id(int index_msb) struct genapic apic_flat = { .name = "flat", + .acpi_madt_oem_check = flat_acpi_madt_oem_check, .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), .target_cpus = flat_target_cpus, @@ -121,8 +157,12 @@ struct genapic apic_flat = { .send_IPI_all = flat_send_IPI_all, .send_IPI_allbutself = flat_send_IPI_allbutself, .send_IPI_mask = flat_send_IPI_mask, + .send_IPI_self = apic_send_IPI_self, .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFu<<24), }; /* @@ -130,6 +170,21 @@ struct genapic apic_flat = { * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ +static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +#ifdef CONFIG_ACPI + /* + * Quirk: some x86_64 machines can only use physical APIC mode + * regardless of how many processors are present (x86_64 ES7000 + * is an example). + */ + if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) + return 1; +#endif + + return 0; +} static cpumask_t physflat_target_cpus(void) { @@ -168,7 +223,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) * May as well be the first. */ cpu = first_cpu(cpumask); - if ((unsigned)cpu < NR_CPUS) + if ((unsigned)cpu < nr_cpu_ids) return per_cpu(x86_cpu_to_apicid, cpu); else return BAD_APICID; @@ -176,6 +231,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) struct genapic apic_physflat = { .name = "physical flat", + .acpi_madt_oem_check = physflat_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = physflat_target_cpus, @@ -185,6 +241,10 @@ struct genapic apic_physflat = { .send_IPI_all = physflat_send_IPI_all, .send_IPI_allbutself = physflat_send_IPI_allbutself, .send_IPI_mask = physflat_send_IPI_mask, + .send_IPI_self = apic_send_IPI_self, .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFu<<24), }; diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c new file mode 100644 index 00000000000..e4bf2cc0d74 --- /dev/null +++ b/arch/x86/kernel/genx2apic_cluster.c @@ -0,0 +1,159 @@ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/dmar.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic) + return 1; + + return 0; +} + +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ + +static cpumask_t x2apic_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +/* + * for now each logical cpu is in its own vector allocation domain. + */ +static cpumask_t x2apic_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + +static void __x2apic_send_IPI_dest(unsigned int apicid, int vector, + unsigned int dest) +{ + unsigned long cfg; + + cfg = __prepare_ICR(0, vector, dest); + + /* + * send the IPI. + */ + x2apic_icr_write(cfg, apicid); +} + +/* + * for now, we send the IPI's one by one in the cpumask. + * TBD: Based on the cpu mask, we can send the IPI's to the cluster group + * at once. We have 16 cpu's in a cluster. This will minimize IPI register + * writes. + */ +static void x2apic_send_IPI_mask(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned long query_cpu; + + local_irq_save(flags); + for_each_cpu_mask(query_cpu, mask) { + __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu), + vector, APIC_DEST_LOGICAL); + } + local_irq_restore(flags); +} + +static void x2apic_send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + x2apic_send_IPI_mask(mask, vector); +} + +static void x2apic_send_IPI_all(int vector) +{ + x2apic_send_IPI_mask(cpu_online_map, vector); +} + +static int x2apic_apic_id_registered(void) +{ + return 1; +} + +static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return per_cpu(x86_cpu_to_logical_apicid, cpu); + else + return BAD_APICID; +} + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = x; + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = id; + return x; +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return current_cpu_data.initial_apicid >> index_msb; +} + +static void x2apic_send_IPI_self(int vector) +{ + apic_write(APIC_SELF_IPI, vector); +} + +static void init_x2apic_ldr(void) +{ + int cpu = smp_processor_id(); + + per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR); + return; +} + +struct genapic apic_x2apic_cluster = { + .name = "cluster x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .int_delivery_mode = dest_LowestPrio, + .int_dest_mode = (APIC_DEST_LOGICAL != 0), + .target_cpus = x2apic_target_cpus, + .vector_allocation_domain = x2apic_vector_allocation_domain, + .apic_id_registered = x2apic_apic_id_registered, + .init_apic_ldr = init_x2apic_ldr, + .send_IPI_all = x2apic_send_IPI_all, + .send_IPI_allbutself = x2apic_send_IPI_allbutself, + .send_IPI_mask = x2apic_send_IPI_mask, + .send_IPI_self = x2apic_send_IPI_self, + .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), +}; diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c new file mode 100644 index 00000000000..8f1343df262 --- /dev/null +++ b/arch/x86/kernel/genx2apic_phys.c @@ -0,0 +1,154 @@ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/dmar.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +static int x2apic_phys; + +static int set_x2apic_phys_mode(char *arg) +{ + x2apic_phys = 1; + return 0; +} +early_param("x2apic_phys", set_x2apic_phys_mode); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic && x2apic_phys) + return 1; + + return 0; +} + +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ + +static cpumask_t x2apic_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +static cpumask_t x2apic_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + +static void __x2apic_send_IPI_dest(unsigned int apicid, int vector, + unsigned int dest) +{ + unsigned long cfg; + + cfg = __prepare_ICR(0, vector, dest); + + /* + * send the IPI. + */ + x2apic_icr_write(cfg, apicid); +} + +static void x2apic_send_IPI_mask(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned long query_cpu; + + local_irq_save(flags); + for_each_cpu_mask(query_cpu, mask) { + __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu), + vector, APIC_DEST_PHYSICAL); + } + local_irq_restore(flags); +} + +static void x2apic_send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + x2apic_send_IPI_mask(mask, vector); +} + +static void x2apic_send_IPI_all(int vector) +{ + x2apic_send_IPI_mask(cpu_online_map, vector); +} + +static int x2apic_apic_id_registered(void) +{ + return 1; +} + +static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return per_cpu(x86_cpu_to_apicid, cpu); + else + return BAD_APICID; +} + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = x; + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = id; + return x; +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return current_cpu_data.initial_apicid >> index_msb; +} + +void x2apic_send_IPI_self(int vector) +{ + apic_write(APIC_SELF_IPI, vector); +} + +void init_x2apic_ldr(void) +{ + return; +} + +struct genapic apic_x2apic_phys = { + .name = "physical x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .int_delivery_mode = dest_Fixed, + .int_dest_mode = (APIC_DEST_PHYSICAL != 0), + .target_cpus = x2apic_target_cpus, + .vector_allocation_domain = x2apic_vector_allocation_domain, + .apic_id_registered = x2apic_apic_id_registered, + .init_apic_ldr = init_x2apic_ldr, + .send_IPI_all = x2apic_send_IPI_all, + .send_IPI_allbutself = x2apic_send_IPI_allbutself, + .send_IPI_mask = x2apic_send_IPI_mask, + .send_IPI_self = x2apic_send_IPI_self, + .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), +}; diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index ebf13908a74..ae2ffc8a400 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -5,23 +5,56 @@ * * SGI UV APIC functions (note: not an Intel compatible APIC) * - * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. */ +#include <linux/kernel.h> #include <linux/threads.h> #include <linux/cpumask.h> #include <linux/string.h> -#include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/bootmem.h> #include <linux/module.h> +#include <linux/hardirq.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> +#include <asm/pgtable.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> +#include <asm/uv/bios.h> + +DEFINE_PER_CPU(int, x2apic_extra_bits); + +static enum uv_system_type uv_system_type; + +static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strcmp(oem_id, "SGI")) { + if (!strcmp(oem_table_id, "UVL")) + uv_system_type = UV_LEGACY_APIC; + else if (!strcmp(oem_table_id, "UVX")) + uv_system_type = UV_X2APIC; + else if (!strcmp(oem_table_id, "UVH")) { + uv_system_type = UV_NON_UNIQUE_APIC; + return 1; + } + } + return 0; +} + +enum uv_system_type get_uv_system_type(void) +{ + return uv_system_type; +} + +int is_uv_system(void) +{ + return uv_system_type != UV_NONE; +} +EXPORT_SYMBOL_GPL(is_uv_system); DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); @@ -38,6 +71,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade); short uv_possible_blades; EXPORT_SYMBOL_GPL(uv_possible_blades); +unsigned long sn_rtc_cycles_per_second; +EXPORT_SYMBOL(sn_rtc_cycles_per_second); + /* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ static cpumask_t uv_target_cpus(void) @@ -55,44 +91,44 @@ static cpumask_t uv_vector_allocation_domain(int cpu) int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip) { unsigned long val; - int nasid; + int pnode; - nasid = uv_apicid_to_nasid(phys_apicid); + pnode = uv_apicid_to_pnode(phys_apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_INIT; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); mdelay(10); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_STARTUP; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); return 0; } static void uv_send_IPI_one(int cpu, int vector) { unsigned long val, apicid, lapicid; - int nasid; + int pnode; apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */ lapicid = apicid & 0x3f; /* ZZZ macro needed */ - nasid = uv_apicid_to_nasid(apicid); + pnode = uv_apicid_to_pnode(apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid << UVH_IPI_INT_APIC_ID_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } static void uv_send_IPI_mask(cpumask_t mask, int vector) { unsigned int cpu; - for (cpu = 0; cpu < NR_CPUS; ++cpu) + for_each_possible_cpu(cpu) if (cpu_isset(cpu, mask)) uv_send_IPI_one(cpu, vector); } @@ -117,6 +153,10 @@ static int uv_apic_id_registered(void) return 1; } +static void uv_init_apic_ldr(void) +{ +} + static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask) { int cpu; @@ -126,15 +166,40 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask) * May as well be the first. */ cpu = first_cpu(cpumask); - if ((unsigned)cpu < NR_CPUS) + if ((unsigned)cpu < nr_cpu_ids) return per_cpu(x86_cpu_to_apicid, cpu); else return BAD_APICID; } +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + WARN_ON(preemptible() && num_online_cpus() > 1); + id = x | __get_cpu_var(x2apic_extra_bits); + + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + /* maskout x2apic_extra_bits ? */ + x = id; + return x; +} + +static unsigned int uv_read_apic_id(void) +{ + + return get_apic_id(apic_read(APIC_ID)); +} + static unsigned int phys_pkg_id(int index_msb) { - return GET_APIC_ID(read_apic_id()) >> index_msb; + return uv_read_apic_id() >> index_msb; } #ifdef ZZZ /* Needs x2apic patch */ @@ -146,52 +211,183 @@ static void uv_send_IPI_self(int vector) struct genapic apic_x2apic_uv_x = { .name = "UV large system", + .acpi_madt_oem_check = uv_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = uv_target_cpus, .vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */ .apic_id_registered = uv_apic_id_registered, + .init_apic_ldr = uv_init_apic_ldr, .send_IPI_all = uv_send_IPI_all, .send_IPI_allbutself = uv_send_IPI_allbutself, .send_IPI_mask = uv_send_IPI_mask, /* ZZZ.send_IPI_self = uv_send_IPI_self, */ .cpu_mask_to_apicid = uv_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */ + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), }; -static __cpuinit void set_x2apic_extra_bits(int nasid) +static __cpuinit void set_x2apic_extra_bits(int pnode) { - __get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6); + __get_cpu_var(x2apic_extra_bits) = (pnode << 6); } /* * Called on boot cpu. */ -static __init void uv_system_init(void) +static __init int boot_pnode_to_blade(int pnode) +{ + int blade; + + for (blade = 0; blade < uv_num_possible_blades(); blade++) + if (pnode == uv_blade_info[blade].pnode) + return blade; + BUG(); +} + +struct redir_addr { + unsigned long redirect; + unsigned long alias; +}; + +#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT + +static __initdata struct redir_addr redir_addrs[] = { + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG}, +}; + +static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) +{ + union uvh_si_alias0_overlay_config_u alias; + union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect; + int i; + + for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { + alias.v = uv_read_local_mmr(redir_addrs[i].alias); + if (alias.s.base == 0) { + *size = (1UL << alias.s.m_alias); + redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); + *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; + return; + } + } + BUG(); +} + +static __init void map_low_mmrs(void) +{ + init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE); + init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE); +} + +enum map_type {map_wb, map_uc}; + +static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type) +{ + unsigned long bytes, paddr; + + paddr = base << shift; + bytes = (1UL << shift); + printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr, + paddr + bytes); + if (map_type == map_uc) + init_extra_mapping_uc(paddr, bytes); + else + init_extra_mapping_wb(paddr, bytes); + +} +static __init void map_gru_high(int max_pnode) +{ + union uvh_rh_gam_gru_overlay_config_mmr_u gru; + int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT; + + gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR); + if (gru.s.enable) + map_high("GRU", gru.s.base, shift, map_wb); +} + +static __init void map_config_high(int max_pnode) +{ + union uvh_rh_gam_cfg_overlay_config_mmr_u cfg; + int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT; + + cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR); + if (cfg.s.enable) + map_high("CONFIG", cfg.s.base, shift, map_uc); +} + +static __init void map_mmr_high(int max_pnode) +{ + union uvh_rh_gam_mmr_overlay_config_mmr_u mmr; + int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT; + + mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR); + if (mmr.s.enable) + map_high("MMR", mmr.s.base, shift, map_uc); +} + +static __init void map_mmioh_high(int max_pnode) +{ + union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; + int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT; + + mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); + if (mmioh.s.enable) + map_high("MMIOH", mmioh.s.base, shift, map_uc); +} + +static __init void uv_rtc_init(void) +{ + long status, ticks_per_sec, drift; + + status = + x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, + &drift); + if (status != 0 || ticks_per_sec < 100000) { + printk(KERN_WARNING + "unable to determine platform RTC clock frequency, " + "guessing.\n"); + /* BIOS gives wrong value for clock freq. so guess */ + sn_rtc_cycles_per_second = 1000000000000UL / 30000UL; + } else + sn_rtc_cycles_per_second = ticks_per_sec; +} + +static bool uv_system_inited; + +void __init uv_system_init(void) { union uvh_si_addr_map_config_u m_n_config; - int bytes, nid, cpu, lcpu, nasid, last_nasid, blade; - unsigned long mmr_base; + union uvh_node_id_u node_id; + unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + int max_pnode = 0; + unsigned long mmr_base, present; + + map_low_mmrs(); m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG); + m_val = m_n_config.s.m_skt; + n_val = m_n_config.s.n_skt; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); - last_nasid = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) - uv_possible_blades++; - last_nasid = nasid; - } + for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) + uv_possible_blades += + hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8)); printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = alloc_bootmem_pages(bytes); + get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); + bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = alloc_bootmem_pages(bytes); memset(uv_node_to_blade, 255, bytes); @@ -200,51 +396,74 @@ static __init void uv_system_init(void) uv_cpu_to_blade = alloc_bootmem_pages(bytes); memset(uv_cpu_to_blade, 255, bytes); - last_nasid = -1; - blade = -1; - lcpu = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) { - blade++; - lcpu = -1; - uv_blade_info[blade].nr_posible_cpus = 0; + blade = 0; + for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) { + present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8); + for (j = 0; j < 64; j++) { + if (!test_bit(j, &present)) + continue; + uv_blade_info[blade].pnode = (i * 64 + j); + uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + blade++; } - last_nasid = nasid; - lcpu++; + } + + node_id.v = uv_read_local_mmr(UVH_NODE_ID); + gnode_upper = (((unsigned long)node_id.s.node_id) & + ~((1 << n_val) - 1)) << m_val; - uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt; - uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt; + uv_rtc_init(); + + for_each_present_cpu(cpu) { + nid = cpu_to_node(cpu); + pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + blade = boot_pnode_to_blade(pnode); + lcpu = uv_blade_info[blade].nr_possible_cpus; + uv_blade_info[blade].nr_possible_cpus++; + + uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; + uv_cpu_hub_info(cpu)->lowmem_remap_top = + lowmem_redir_base + lowmem_redir_size; + uv_cpu_hub_info(cpu)->m_val = m_val; + uv_cpu_hub_info(cpu)->n_val = m_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; - uv_cpu_hub_info(cpu)->local_nasid = nasid; - uv_cpu_hub_info(cpu)->gnode_upper = - nasid & ~((1 << uv_hub_info->n_val) - 1); + uv_cpu_hub_info(cpu)->pnode = pnode; + uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */ - uv_blade_info[blade].nasid = nasid; - uv_blade_info[blade].nr_posible_cpus++; uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; + max_pnode = max(pnode, max_pnode); - printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid); - printk(KERN_DEBUG "UV lcpu %d, blade %d\n", lcpu, blade); + printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, " + "lcpu %d, blade %d\n", + cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, + lcpu, blade); } + + map_gru_high(max_pnode); + map_mmr_high(max_pnode); + map_config_high(max_pnode); + map_mmioh_high(max_pnode); + uv_system_inited = true; } /* * Called on each cpu to initialize the per_cpu UV data area. + * ZZZ hotplug not supported yet */ void __cpuinit uv_cpu_init(void) { - if (!uv_node_to_blade) - uv_system_init(); + BUG_ON(!uv_system_inited); uv_blade_info[uv_numa_blade_id()].nr_online_cpus++; if (get_uv_system_type() == UV_NON_UNIQUE_APIC) - set_x2apic_extra_bits(uv_hub_info->local_nasid); + set_x2apic_extra_bits(uv_hub_info->pnode); } + + diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c index e8edd63ab00..9b08e852fd1 100644 --- a/arch/x86/kernel/geode_32.c +++ b/arch/x86/kernel/geode_32.c @@ -166,6 +166,8 @@ int geode_has_vsa2(void) static int has_vsa2 = -1; if (has_vsa2 == -1) { + u16 val; + /* * The VSA has virtual registers that we can query for a * signature. @@ -173,7 +175,8 @@ int geode_has_vsa2(void) outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG); + val = inw(VSA_VRC_DATA); + has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG); } return has_vsa2; diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c new file mode 100644 index 00000000000..3e66bd364a9 --- /dev/null +++ b/arch/x86/kernel/head.c @@ -0,0 +1,55 @@ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/bios_ebda.h> + +#define BIOS_LOWMEM_KILOBYTES 0x413 + +/* + * The BIOS places the EBDA/XBDA at the top of conventional + * memory, and usually decreases the reported amount of + * conventional memory (int 0x12) too. This also contains a + * workaround for Dell systems that neglect to reserve EBDA. + * The same workaround also avoids a problem with the AMD768MPX + * chipset: reserve a page before VGA to prevent PCI prefetch + * into it (errata #56). Usually the page is reserved anyways, + * unless you have no PS/2 mouse plugged in. + */ +void __init reserve_ebda_region(void) +{ + unsigned int lowmem, ebda_addr; + + /* To determine the position of the EBDA and the */ + /* end of conventional memory, we need to look at */ + /* the BIOS data area. In a paravirtual environment */ + /* that area is absent. We'll just have to assume */ + /* that the paravirt case can handle memory setup */ + /* correctly, without our help. */ + if (paravirt_enabled()) + return; + + /* end of low (conventional) memory */ + lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); + lowmem <<= 10; + + /* start of EBDA area */ + ebda_addr = get_bios_ebda(); + + /* Fixup: bios puts an EBDA in the top 64K segment */ + /* of conventional memory, but does not adjust lowmem. */ + if ((lowmem - ebda_addr) <= 0x10000) + lowmem = ebda_addr; + + /* Fixup: bios does not report an EBDA at all. */ + /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ + if ((ebda_addr == 0) && (lowmem >= 0x9f000)) + lowmem = 0x9f000; + + /* Paranoia: should never happen, but... */ + if ((lowmem == 0) || (lowmem >= 0x100000)) + lowmem = 0x9f000; + + /* reserve all memory between lowmem and the 1MB mark */ + reserve_early_overlap_ok(lowmem, 0x100000, "BIOS reserved"); +} diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 3db05905892..fa1d25dd83e 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -8,7 +8,34 @@ #include <linux/init.h> #include <linux/start_kernel.h> +#include <asm/setup.h> +#include <asm/sections.h> +#include <asm/e820.h> +#include <asm/bios_ebda.h> + void __init i386_start_kernel(void) { + reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS"); + +#ifdef CONFIG_BLK_DEV_INITRD + /* Reserve INITRD */ + if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); + } +#endif + reserve_early(init_pg_tables_start, init_pg_tables_end, + "INIT_PG_TABLE"); + + reserve_ebda_region(); + + /* + * At this point everything still needed from the boot loader + * or BIOS or kernel text should be early reserved or marked not + * RAM in e820. All other memory is free game. + */ + start_kernel(); } diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index e25c57b8aa8..d16084f9064 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -25,6 +25,27 @@ #include <asm/e820.h> #include <asm/bios_ebda.h> +/* boot cpu pda */ +static struct x8664_pda _boot_cpu_pda __read_mostly; + +#ifdef CONFIG_SMP +/* + * We install an empty cpu_pda pointer table to indicate to early users + * (numa_set_node) that the cpu_pda pointer table for cpus other than + * the boot cpu is not yet setup. + */ +static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata; +#else +static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly; +#endif + +void __init x86_64_init_pda(void) +{ + _cpu_pda = __cpu_pda; + cpu_pda(0) = &_boot_cpu_pda; + pda_init(0); +} + static void __init zap_identity_mappings(void) { pgd_t *pgd = pgd_offset_k(0UL); @@ -51,74 +72,6 @@ static void __init copy_bootdata(char *real_mode_data) } } -#define BIOS_LOWMEM_KILOBYTES 0x413 - -/* - * The BIOS places the EBDA/XBDA at the top of conventional - * memory, and usually decreases the reported amount of - * conventional memory (int 0x12) too. This also contains a - * workaround for Dell systems that neglect to reserve EBDA. - * The same workaround also avoids a problem with the AMD768MPX - * chipset: reserve a page before VGA to prevent PCI prefetch - * into it (errata #56). Usually the page is reserved anyways, - * unless you have no PS/2 mouse plugged in. - */ -static void __init reserve_ebda_region(void) -{ - unsigned int lowmem, ebda_addr; - - /* To determine the position of the EBDA and the */ - /* end of conventional memory, we need to look at */ - /* the BIOS data area. In a paravirtual environment */ - /* that area is absent. We'll just have to assume */ - /* that the paravirt case can handle memory setup */ - /* correctly, without our help. */ - if (paravirt_enabled()) - return; - - /* end of low (conventional) memory */ - lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); - lowmem <<= 10; - - /* start of EBDA area */ - ebda_addr = get_bios_ebda(); - - /* Fixup: bios puts an EBDA in the top 64K segment */ - /* of conventional memory, but does not adjust lowmem. */ - if ((lowmem - ebda_addr) <= 0x10000) - lowmem = ebda_addr; - - /* Fixup: bios does not report an EBDA at all. */ - /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ - if ((ebda_addr == 0) && (lowmem >= 0x9f000)) - lowmem = 0x9f000; - - /* Paranoia: should never happen, but... */ - if ((lowmem == 0) || (lowmem >= 0x100000)) - lowmem = 0x9f000; - - /* reserve all memory between lowmem and the 1MB mark */ - reserve_early(lowmem, 0x100000, "BIOS reserved"); -} - -static void __init reserve_setup_data(void) -{ - struct setup_data *data; - unsigned long pa_data; - char buf[32]; - - if (boot_params.hdr.version < 0x0209) - return; - pa_data = boot_params.hdr.setup_data; - while (pa_data) { - data = early_ioremap(pa_data, sizeof(*data)); - sprintf(buf, "setup data %x", data->type); - reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); - pa_data = data->next; - early_iounmap(data, sizeof(*data)); - } -} - void __init x86_64_start_kernel(char * real_mode_data) { int i; @@ -135,6 +88,7 @@ void __init x86_64_start_kernel(char * real_mode_data) BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == (__START_KERNEL & PGDIR_MASK))); + BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END); /* clear bss before set_intr_gate with early_idt_handler */ clear_bss(); @@ -154,12 +108,16 @@ void __init x86_64_start_kernel(char * real_mode_data) } load_idt((const struct desc_ptr *)&idt_descr); - early_printk("Kernel alive\n"); + if (console_loglevel == 10) + early_printk("Kernel alive\n"); - for (i = 0; i < NR_CPUS; i++) - cpu_pda(i) = &boot_cpu_pda[i]; + x86_64_init_pda(); - pda_init(0); + x86_64_start_reservations(real_mode_data); +} + +void __init x86_64_start_reservations(char *real_mode_data) +{ copy_bootdata(__va(real_mode_data)); reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS"); @@ -175,7 +133,6 @@ void __init x86_64_start_kernel(char * real_mode_data) #endif reserve_ebda_region(); - reserve_setup_data(); /* * At this point everything still needed from the boot loader diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index f7357cc0162..e835b4eea70 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -172,10 +172,6 @@ num_subarch_entries = (. - subarch_entries) / 4 * * Note that the stack is not yet set up! */ -#define PTE_ATTR 0x007 /* PRESENT+RW+USER */ -#define PDE_ATTR 0x067 /* PRESENT+RW+USER+DIRTY+ACCESSED */ -#define PGD_ATTR 0x001 /* PRESENT (no other attributes) */ - default_entry: #ifdef CONFIG_X86_PAE @@ -194,10 +190,11 @@ default_entry: xorl %ebx,%ebx /* %ebx is kept at zero */ movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_pmd), %edx - movl $PTE_ATTR, %eax + movl $PTE_IDENT_ATTR, %eax 10: - leal PDE_ATTR(%edi),%ecx /* Create PMD entry */ + leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */ movl %ecx,(%edx) /* Store PMD entry */ /* Upper half already zero */ addl $8,%edx @@ -214,24 +211,27 @@ default_entry: * End condition: we must map up to and including INIT_MAP_BEYOND_END * bytes beyond the end of our own page tables. */ - leal (INIT_MAP_BEYOND_END+PTE_ATTR)(%edi),%ebp + leal (INIT_MAP_BEYOND_END+PTE_IDENT_ATTR)(%edi),%ebp cmpl %ebp,%eax jb 10b 1: movl %edi,pa(init_pg_tables_end) + shrl $12, %eax + movl %eax, pa(max_pfn_mapped) /* Do early initialization of the fixmap area */ - movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax + movl $pa(swapper_pg_fixmap)+PDE_IDENT_ATTR,%eax movl %eax,pa(swapper_pg_pmd+0x1000*KPMDS-8) #else /* Not PAE */ page_pde_offset = (__PAGE_OFFSET >> 20); movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_dir), %edx - movl $PTE_ATTR, %eax + movl $PTE_IDENT_ATTR, %eax 10: - leal PDE_ATTR(%edi),%ecx /* Create PDE entry */ + leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */ movl %ecx,(%edx) /* Store identity PDE entry */ movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */ addl $4,%edx @@ -245,13 +245,15 @@ page_pde_offset = (__PAGE_OFFSET >> 20); * bytes beyond the end of our own page tables; the +0x007 is * the attribute bits */ - leal (INIT_MAP_BEYOND_END+PTE_ATTR)(%edi),%ebp + leal (INIT_MAP_BEYOND_END+PTE_IDENT_ATTR)(%edi),%ebp cmpl %ebp,%eax jb 10b movl %edi,pa(init_pg_tables_end) + shrl $12, %eax + movl %eax, pa(max_pfn_mapped) /* Do early initialization of the fixmap area */ - movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax + movl $pa(swapper_pg_fixmap)+PDE_IDENT_ATTR,%eax movl %eax,pa(swapper_pg_dir+0xffc) #endif jmp 3f @@ -446,10 +448,10 @@ is386: movl $2,%ecx # set MP je 1f movl $(__KERNEL_PERCPU), %eax movl %eax,%fs # set this cpu's percpu - jmp initialize_secondary # all other CPUs call initialize_secondary + movl (stack_start), %esp 1: #endif /* CONFIG_SMP */ - jmp i386_start_kernel + jmp *(initial_code) /* * We depend on ET to be correct. This checks for 287/387. @@ -592,6 +594,11 @@ ignore_int: #endif iret +.section .cpuinit.data,"wa" +.align 4 +ENTRY(initial_code) + .long i386_start_kernel + .section .text /* * Real beginning of normal "text" segment @@ -623,19 +630,19 @@ ENTRY(empty_zero_page) /* Page-aligned for the benefit of paravirt? */ .align PAGE_SIZE_asm ENTRY(swapper_pg_dir) - .long pa(swapper_pg_pmd+PGD_ATTR),0 /* low identity map */ + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR),0 /* low identity map */ # if KPMDS == 3 - .long pa(swapper_pg_pmd+PGD_ATTR),0 - .long pa(swapper_pg_pmd+PGD_ATTR+0x1000),0 - .long pa(swapper_pg_pmd+PGD_ATTR+0x2000),0 + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR),0 + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR+0x1000),0 + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR+0x2000),0 # elif KPMDS == 2 .long 0,0 - .long pa(swapper_pg_pmd+PGD_ATTR),0 - .long pa(swapper_pg_pmd+PGD_ATTR+0x1000),0 + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR),0 + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR+0x1000),0 # elif KPMDS == 1 .long 0,0 .long 0,0 - .long pa(swapper_pg_pmd+PGD_ATTR),0 + .long pa(swapper_pg_pmd+PGD_IDENT_ATTR),0 # else # error "Kernel PMDs should be 1, 2 or 3" # endif diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955bb1d..26cfdc1d7c7 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include <asm/page.h> #include <asm/msr.h> #include <asm/cache.h> +#include <asm/processor-flags.h> #ifdef CONFIG_PARAVIRT #include <asm/asm-offsets.h> @@ -31,6 +32,13 @@ * */ +#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) + +L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET) +L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET) +L4_START_KERNEL = pgd_index(__START_KERNEL_map) +L3_START_KERNEL = pud_index(__START_KERNEL_map) + .text .section .text.head .code64 @@ -76,8 +84,8 @@ startup_64: /* Fixup the physical addresses in the page table */ addq %rbp, init_level4_pgt + 0(%rip) - addq %rbp, init_level4_pgt + (258*8)(%rip) - addq %rbp, init_level4_pgt + (511*8)(%rip) + addq %rbp, init_level4_pgt + (L4_PAGE_OFFSET*8)(%rip) + addq %rbp, init_level4_pgt + (L4_START_KERNEL*8)(%rip) addq %rbp, level3_ident_pgt + 0(%rip) @@ -102,7 +110,7 @@ startup_64: movq %rdi, %rax shrq $PMD_SHIFT, %rax andq $(PTRS_PER_PMD - 1), %rax - leaq __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx + leaq __PAGE_KERNEL_IDENT_LARGE_EXEC(%rdi), %rdx leaq level2_spare_pgt(%rip), %rbx movq %rdx, 0(%rbx, %rax, 8) ident_complete: @@ -128,7 +136,7 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_TRAMPOLINE addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) #endif @@ -154,9 +162,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ @@ -184,19 +190,15 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 /* Setup a boot time stack */ - movq init_rsp(%rip),%rsp + movq stack_start(%rip),%rsp /* zero EFLAGS after setting rsp */ pushq $0 @@ -208,7 +210,7 @@ ENTRY(secondary_startup_64) * addresses where we're currently running on. We have to do that here * because in 32bit we couldn't load a 64bit linear address. */ - lgdt cpu_gdt_descr(%rip) + lgdt early_gdt_descr(%rip) /* set up data segments. actually 0 would do too */ movl $__KERNEL_DS,%eax @@ -257,8 +259,9 @@ ENTRY(secondary_startup_64) .quad x86_64_start_kernel __FINITDATA - ENTRY(init_rsp) + ENTRY(stack_start) .quad init_thread_union+THREAD_SIZE-8 + .word 0 bad_address: jmp bad_address @@ -327,11 +330,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* @@ -342,9 +345,9 @@ ENTRY(name) */ NEXT_PAGE(init_level4_pgt) .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 257,8,0 + .org init_level4_pgt + L4_PAGE_OFFSET*8, 0 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 252,8,0 + .org init_level4_pgt + L4_START_KERNEL*8, 0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE @@ -353,7 +356,7 @@ NEXT_PAGE(level3_ident_pgt) .fill 511,8,0 NEXT_PAGE(level3_kernel_pgt) - .fill 510,8,0 + .fill L3_START_KERNEL,8,0 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE @@ -371,7 +374,7 @@ NEXT_PAGE(level2_ident_pgt) /* Since I easily can, map the first 1G. * Don't set NX because code runs from these pages. */ - PMDS(0, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD) + PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD) NEXT_PAGE(level2_kernel_pgt) /* @@ -384,7 +387,7 @@ NEXT_PAGE(level2_kernel_pgt) * If you want to increase this then increase MODULES_VADDR * too.) */ - PMDS(0, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, + PMDS(0, __PAGE_KERNEL_LARGE_EXEC, KERNEL_IMAGE_SIZE/PMD_SIZE) NEXT_PAGE(level2_spare_pgt) @@ -395,54 +398,17 @@ NEXT_PAGE(level2_spare_pgt) .data .align 16 - .globl cpu_gdt_descr -cpu_gdt_descr: - .word gdt_end-cpu_gdt_table-1 -gdt: - .quad cpu_gdt_table -#ifdef CONFIG_SMP - .rept NR_CPUS-1 - .word 0 - .quad 0 - .endr -#endif + .globl early_gdt_descr +early_gdt_descr: + .word GDT_ENTRIES*8-1 + .quad per_cpu__gdt_page ENTRY(phys_base) /* This must match the first entry in level2_kernel_pgt */ .quad 0x0000000000000000 -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ - - .section .data.page_aligned, "aw" - .align PAGE_SIZE - -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ +#include "../../x86/xen/xen-head.S" -ENTRY(cpu_gdt_table) - .quad 0x0000000000000000 /* NULL descriptor */ - .quad 0x00cf9b000000ffff /* __KERNEL32_CS */ - .quad 0x00af9b000000ffff /* __KERNEL_CS */ - .quad 0x00cf93000000ffff /* __KERNEL_DS */ - .quad 0x00cffb000000ffff /* __USER32_CS */ - .quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */ - .quad 0x00affb000000ffff /* __USER_CS */ - .quad 0x0 /* unused */ - .quad 0,0 /* TSS */ - .quad 0,0 /* LDT */ - .quad 0,0,0 /* three TLS descriptors */ - .quad 0x0000f40000000000 /* node/CPU stored in limit */ -gdt_end: - /* asm/segment.h:GDT_ENTRIES must match this */ - /* This should be a multiple of the cache line size */ - /* GDTs of other CPUs are now dynamically allocated */ - - /* zero the remaining page */ - .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 - .section .bss, "aw", @nobits .align L1_CACHE_BYTES ENTRY(idt_table) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc42..73deaffadd0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -36,26 +36,15 @@ static inline void hpet_writel(unsigned long d, unsigned long a) } #ifdef CONFIG_X86_64 - #include <asm/pgtable.h> - -static inline void hpet_set_mapping(void) -{ - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); -} - -static inline void hpet_clear_mapping(void) -{ - hpet_virt_address = NULL; -} - -#else +#endif static inline void hpet_set_mapping(void) { hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); +#ifdef CONFIG_X86_64 + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); +#endif } static inline void hpet_clear_mapping(void) @@ -63,7 +52,6 @@ static inline void hpet_clear_mapping(void) iounmap(hpet_virt_address); hpet_virt_address = NULL; } -#endif /* * HPET command line enable / disable @@ -206,25 +194,24 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); + /* 5 usec minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = 5000; /* * Start hpet with the boot cpu mask and make it @@ -283,15 +270,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode, } static int hpet_legacy_next_event(unsigned long delta, - struct clock_event_device *evt) + struct clock_event_device *evt) { - unsigned long cnt; + u32 cnt; cnt = hpet_readl(HPET_COUNTER); - cnt += delta; + cnt += (u32) delta; hpet_writel(cnt, HPET_T0_CMP); - return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; + /* + * We need to read back the CMP register to make sure that + * what we wrote hit the chip before we compare it to the + * counter. + */ + WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt); + + return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } /* @@ -324,7 +318,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +345,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); @@ -378,6 +366,7 @@ static int hpet_clocksource_register(void) int __init hpet_enable(void) { unsigned long id; + int i; if (!is_hpet_capable()) return 0; @@ -388,6 +377,29 @@ int __init hpet_enable(void) * Read the period and check for a sane value: */ hpet_period = hpet_readl(HPET_PERIOD); + + /* + * AMD SB700 based systems with spread spectrum enabled use a + * SMM based HPET emulation to provide proper frequency + * setting. The SMM code is initialized with the first HPET + * register access and takes some time to complete. During + * this time the config register reads 0xffffffff. We check + * for max. 1000 loops whether the config register reads a non + * 0xffffffff value to make sure that HPET is up and running + * before we go further. A counting loop is safe, as the HPET + * access takes thousands of CPU cycles. On non SB700 based + * machines this check is only done once and has no side + * effects. + */ + for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) { + if (i == 1000) { + printk(KERN_WARNING + "HPET config register value = 0xFFFFFFFF. " + "Disabling HPET\n"); + goto out_nohpet; + } + } + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) goto out_nohpet; @@ -487,7 +499,7 @@ void hpet_disable(void) #define RTC_NUM_INTS 1 static unsigned long hpet_rtc_flags; -static unsigned long hpet_prev_update_sec; +static int hpet_prev_update_sec; static struct rtc_time hpet_alarm_time; static unsigned long hpet_pie_count; static unsigned long hpet_t1_cmp; @@ -594,6 +606,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask) hpet_rtc_flags |= bit_mask; + if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE)) + hpet_prev_update_sec = -1; + if (!oldbits) hpet_rtc_timer_init(); @@ -671,7 +686,7 @@ static void hpet_rtc_timer_reinit(void) if (hpet_rtc_flags & RTC_PIE) hpet_pie_count += lost_ints; if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost %d interrupts\n", + printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n", lost_ints); } } @@ -689,7 +704,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) if (hpet_rtc_flags & RTC_UIE && curr_time.tm_sec != hpet_prev_update_sec) { - rtc_int_flag = RTC_UF; + if (hpet_prev_update_sec >= 0) + rtc_int_flag = RTC_UF; hpet_prev_update_sec = curr_time.tm_sec; } diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c index deb43785e92..dd7ebee446a 100644 --- a/arch/x86/kernel/i386_ksyms_32.c +++ b/arch/x86/kernel/i386_ksyms_32.c @@ -1,7 +1,14 @@ #include <linux/module.h> + #include <asm/checksum.h> -#include <asm/desc.h> #include <asm/pgtable.h> +#include <asm/desc.h> +#include <asm/ftrace.h> + +#ifdef CONFIG_FTRACE +/* mcount is defined in assembly */ +EXPORT_SYMBOL(mcount); +#endif /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index eb9ddd8efb8..1f20608d4ca 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -21,9 +21,12 @@ # include <asm/sigcontext32.h> # include <asm/user32.h> #else -# define save_i387_ia32 save_i387 -# define restore_i387_ia32 restore_i387 +# define save_i387_xstate_ia32 save_i387_xstate +# define restore_i387_xstate_ia32 restore_i387_xstate # define _fpstate_ia32 _fpstate +# define _xstate_ia32 _xstate +# define sig_xstate_ia32_size sig_xstate_size +# define fx_sw_reserved_ia32 fx_sw_reserved # define user_i387_ia32_struct user_i387_struct # define user32_fxsr_struct user_fxsr_struct #endif @@ -36,6 +39,7 @@ static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu; unsigned int xstate_size; +unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32); static struct i387_fxsave_struct fx_scratch __cpuinitdata; void __cpuinit mxcsr_feature_mask_init(void) @@ -61,6 +65,11 @@ void __init init_thread_xstate(void) return; } + if (cpu_has_xsave) { + xsave_cntxt_init(); + return; + } + if (cpu_has_fxsr) xstate_size = sizeof(struct i387_fxsave_struct); #ifdef CONFIG_X86_32 @@ -83,9 +92,19 @@ void __cpuinit fpu_init(void) write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */ + /* + * Boot processor to setup the FP and extended state context info. + */ + if (!smp_processor_id()) + init_thread_xstate(); + xsave_init(); + mxcsr_feature_mask_init(); /* clean state in init */ - current_thread_info()->status = 0; + if (cpu_has_xsave) + current_thread_info()->status = TS_XSAVE; + else + current_thread_info()->status = 0; clear_used_math(); } #endif /* CONFIG_X86_64 */ @@ -195,6 +214,13 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, */ target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask; + /* + * update the header bits in the xsave header, indicating the + * presence of FP and SSE state. + */ + if (cpu_has_xsave) + target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE; + return ret; } @@ -395,6 +421,12 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset, if (!ret) convert_to_fxsr(target, &env); + /* + * update the header bit in the xsave header, indicating the + * presence of FP. + */ + if (cpu_has_xsave) + target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FP; return ret; } @@ -407,7 +439,6 @@ static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf) struct task_struct *tsk = current; struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave; - unlazy_fpu(tsk); fp->status = fp->swd; if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct))) return -1; @@ -421,8 +452,6 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf) struct user_i387_ia32_struct env; int err = 0; - unlazy_fpu(tsk); - convert_from_fxsr(&env, tsk); if (__copy_to_user(buf, &env, sizeof(env))) return -1; @@ -432,16 +461,54 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf) if (err) return -1; - if (__copy_to_user(&buf->_fxsr_env[0], fx, - sizeof(struct i387_fxsave_struct))) + if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size)) + return -1; + return 1; +} + +static int save_i387_xsave(void __user *buf) +{ + struct task_struct *tsk = current; + struct _fpstate_ia32 __user *fx = buf; + int err = 0; + + /* + * For legacy compatible, we always set FP/SSE bits in the bit + * vector while saving the state to the user context. + * This will enable us capturing any changes(during sigreturn) to + * the FP/SSE bits by the legacy applications which don't touch + * xstate_bv in the xsave header. + * + * xsave aware applications can change the xstate_bv in the xsave + * header as well as change any contents in the memory layout. + * xrestore as part of sigreturn will capture all the changes. + */ + tsk->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE; + + if (save_i387_fxsave(fx) < 0) + return -1; + + err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32, + sizeof(struct _fpx_sw_bytes)); + err |= __put_user(FP_XSTATE_MAGIC2, + (__u32 __user *) (buf + sig_xstate_ia32_size + - FP_XSTATE_MAGIC2_SIZE)); + if (err) return -1; + return 1; } -int save_i387_ia32(struct _fpstate_ia32 __user *buf) +int save_i387_xstate_ia32(void __user *buf) { + struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf; + struct task_struct *tsk = current; + if (!used_math()) return 0; + + if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size)) + return -EACCES; /* * This will cause a "finit" to be triggered by the next * attempted FPU operation by the 'current' process. @@ -451,13 +518,17 @@ int save_i387_ia32(struct _fpstate_ia32 __user *buf) if (!HAVE_HWFP) { return fpregs_soft_get(current, NULL, 0, sizeof(struct user_i387_ia32_struct), - NULL, buf) ? -1 : 1; + NULL, fp) ? -1 : 1; } + unlazy_fpu(tsk); + + if (cpu_has_xsave) + return save_i387_xsave(fp); if (cpu_has_fxsr) - return save_i387_fxsave(buf); + return save_i387_fxsave(fp); else - return save_i387_fsave(buf); + return save_i387_fsave(fp); } static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf) @@ -468,14 +539,15 @@ static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf) sizeof(struct i387_fsave_struct)); } -static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) +static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf, + unsigned int size) { struct task_struct *tsk = current; struct user_i387_ia32_struct env; int err; err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0], - sizeof(struct i387_fxsave_struct)); + size); /* mxcsr reserved bits must be masked to zero for security reasons */ tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask; if (err || __copy_from_user(&env, buf, sizeof(env))) @@ -485,14 +557,69 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) return 0; } -int restore_i387_ia32(struct _fpstate_ia32 __user *buf) +static int restore_i387_xsave(void __user *buf) +{ + struct _fpx_sw_bytes fx_sw_user; + struct _fpstate_ia32 __user *fx_user = + ((struct _fpstate_ia32 __user *) buf); + struct i387_fxsave_struct __user *fx = + (struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0]; + struct xsave_hdr_struct *xsave_hdr = + ¤t->thread.xstate->xsave.xsave_hdr; + u64 mask; + int err; + + if (check_for_xstate(fx, buf, &fx_sw_user)) + goto fx_only; + + mask = fx_sw_user.xstate_bv; + + err = restore_i387_fxsave(buf, fx_sw_user.xstate_size); + + xsave_hdr->xstate_bv &= pcntxt_mask; + /* + * These bits must be zero. + */ + xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0; + + /* + * Init the state that is not present in the memory layout + * and enabled by the OS. + */ + mask = ~(pcntxt_mask & ~mask); + xsave_hdr->xstate_bv &= mask; + + return err; +fx_only: + /* + * Couldn't find the extended state information in the memory + * layout. Restore the FP/SSE and init the other extended state + * enabled by the OS. + */ + xsave_hdr->xstate_bv = XSTATE_FPSSE; + return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct)); +} + +int restore_i387_xstate_ia32(void __user *buf) { int err; struct task_struct *tsk = current; + struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf; if (HAVE_HWFP) clear_fpu(tsk); + if (!buf) { + if (used_math()) { + clear_fpu(tsk); + clear_used_math(); + } + + return 0; + } else + if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size)) + return -EACCES; + if (!used_math()) { err = init_fpu(tsk); if (err) @@ -500,14 +627,17 @@ int restore_i387_ia32(struct _fpstate_ia32 __user *buf) } if (HAVE_HWFP) { - if (cpu_has_fxsr) - err = restore_i387_fxsave(buf); + if (cpu_has_xsave) + err = restore_i387_xsave(buf); + else if (cpu_has_fxsr) + err = restore_i387_fxsave(fp, sizeof(struct + i387_fxsave_struct)); else - err = restore_i387_fsave(buf); + err = restore_i387_fsave(fp); } else { err = fpregs_soft_set(current, NULL, 0, sizeof(struct user_i387_ia32_struct), - NULL, buf) != 0; + NULL, fp) != 0; } set_used_math(); diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c index fe631967d62..4b8a53d841f 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259.c @@ -1,8 +1,10 @@ +#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/timex.h> #include <linux/slab.h> #include <linux/random.h> #include <linux/init.h> @@ -10,10 +12,12 @@ #include <linux/sysdev.h> #include <linux/bitops.h> +#include <asm/acpi.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> #include <asm/timer.h> +#include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/delay.h> #include <asm/desc.h> @@ -32,7 +36,7 @@ static int i8259A_auto_eoi; DEFINE_SPINLOCK(i8259A_lock); static void mask_and_ack_8259A(unsigned int); -static struct irq_chip i8259A_chip = { +struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, .disable = disable_8259A_irq, @@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<<irq; if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + outb(0x0B, PIC_MASTER_CMD); /* ISR register */ value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ + outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */ return value; } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + outb(0x0B, PIC_SLAVE_CMD); /* ISR register */ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } @@ -171,12 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7), PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -199,7 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); @@ -275,6 +282,30 @@ static int __init i8259A_init_sysfs(void) device_initcall(i8259A_init_sysfs); +void mask_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void unmask_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + void init_8259A(int auto_eoi) { unsigned long flags; @@ -290,17 +321,28 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ + + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64, + to 0x20-0x27 on i386 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); + if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ + + /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt @@ -317,93 +359,3 @@ void init_8259A(int auto_eoi) spin_unlock_irqrestore(&i8259A_lock, flags); } - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index fa57a156850..00000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,512 +0,0 @@ -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> - -#include <asm/acpi.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/hw_irq.h> -#include <asm/pgtable.h> -#include <asm/delay.h> -#include <asm/desc.h> -#include <asm/apic.h> -#include <asm/i8259.h> - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(PIC_MASTER_CMD) & mask; - else - ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ - value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ - return value; - } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ - value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 4dc8600d9d2..e710289f673 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/sched.h> +#include <linux/bootmem.h> #include <linux/mc146818rtc.h> #include <linux/compiler.h> #include <linux/acpi.h> @@ -45,10 +46,13 @@ #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/setup.h> #include <mach_apic.h> #include <mach_apicdef.h> +#define __apicdebuginit(type) static type __init + int (*ioapic_renumber_irq)(int ioapic, int irq); atomic_t irq_mis_count; @@ -56,9 +60,9 @@ atomic_t irq_mis_count; static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); +DEFINE_SPINLOCK(vector_lock); -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* * Is the SiS APIC rmw bug present ? @@ -72,15 +76,21 @@ int sis_apic_bug = -1; int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + static int disable_timer_pin_1 __initdata; /* @@ -110,7 +120,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -239,7 +249,7 @@ static void __init replace_pin_at_irq(unsigned int irq, } } -static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable) { struct irq_pin_list *entry = irq_2_pin + irq; unsigned int pin, reg; @@ -259,30 +269,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign } /* mask = 1 */ -static void __mask_IO_APIC_irq (unsigned int irq) +static void __mask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); } /* mask = 0 */ -static void __unmask_IO_APIC_irq (unsigned int irq) +static void __unmask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0, 0x00010000); + __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); } /* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +static void __mask_and_edge_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, + IO_APIC_REDIR_LEVEL_TRIGGER); } /* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +static void __unmask_and_level_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, + IO_APIC_REDIR_MASKED); } -static void mask_IO_APIC_irq (unsigned int irq) +static void mask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -291,7 +303,7 @@ static void mask_IO_APIC_irq (unsigned int irq) spin_unlock_irqrestore(&ioapic_lock, flags); } -static void unmask_IO_APIC_irq (unsigned int irq) +static void unmask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -303,7 +315,7 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - + /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) @@ -315,7 +327,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) ioapic_mask_entry(apic, pin); } -static void clear_IO_APIC (void) +static void clear_IO_APIC(void) { int apic, pin; @@ -332,7 +344,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; cpumask_t tmp; - + cpus_and(tmp, cpumask, cpu_online_map); if (cpus_empty(tmp)) tmp = TARGET_CPUS; @@ -361,7 +373,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # include <linux/kernel_stat.h> /* kstat */ # include <linux/slab.h> /* kmalloc() */ # include <linux/timer.h> - + #define IRQBALANCE_CHECK_ARCH -999 #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) @@ -373,14 +385,14 @@ static int physical_balance __read_mostly; static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; static struct irq_cpu_info { - unsigned long * last_irq; - unsigned long * irq_delta; + unsigned long *last_irq; + unsigned long *irq_delta; unsigned long irq; } irq_cpu_data[NR_CPUS]; #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) -#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) -#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) +#define LAST_CPU_IRQ(cpu, irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu, irq) (irq_cpu_data[cpu].irq_delta[irq]) #define IDLE_ENOUGH(cpu,now) \ (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) @@ -419,8 +431,8 @@ inside: if (cpu == -1) cpu = NR_CPUS-1; } - } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || - (search_idle && !IDLE_ENOUGH(cpu,now))); + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu, now))); return cpu; } @@ -430,15 +442,14 @@ static inline void balance_irq(int cpu, int irq) unsigned long now = jiffies; cpumask_t allowed_mask; unsigned int new_cpu; - + if (irqbalance_disabled) - return; + return; cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); - if (cpu != new_cpu) { + if (cpu != new_cpu) set_pending_irq(irq, cpumask_of_cpu(new_cpu)); - } } static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) @@ -450,14 +461,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) if (!irq_desc[j].action) continue; /* Is it a significant load ? */ - if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) < useful_load_threshold) continue; balance_irq(i, j); } } balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } @@ -486,22 +497,22 @@ static void do_irq_balance(void) /* Is this an active IRQ or balancing disabled ? */ if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; - if ( package_index == i ) - IRQ_DELTA(package_index,j) = 0; + if (package_index == i) + IRQ_DELTA(package_index, j) = 0; /* Determine the total count per processor per IRQ */ value_now = (unsigned long) kstat_cpu(i).irqs[j]; /* Determine the activity per processor per IRQ */ - delta = value_now - LAST_CPU_IRQ(i,j); + delta = value_now - LAST_CPU_IRQ(i, j); /* Update last_cpu_irq[][] for the next time */ - LAST_CPU_IRQ(i,j) = value_now; + LAST_CPU_IRQ(i, j) = value_now; /* Ignore IRQs whose rate is less than the clock */ if (delta < useful_load_threshold) continue; /* update the load for the processor or package total */ - IRQ_DELTA(package_index,j) += delta; + IRQ_DELTA(package_index, j) += delta; /* Keep track of the higher numbered sibling as well */ if (i != package_index) @@ -527,7 +538,8 @@ static void do_irq_balance(void) max_cpu_irq = ULONG_MAX; tryanothercpu: - /* Look for heaviest loaded processor. + /* + * Look for heaviest loaded processor. * We may come back to get the next heaviest loaded processor. * Skip processors with trivial loads. */ @@ -536,7 +548,7 @@ tryanothercpu: for_each_online_cpu(i) { if (i != CPU_TO_PACKAGEINDEX(i)) continue; - if (max_cpu_irq <= CPU_IRQ(i)) + if (max_cpu_irq <= CPU_IRQ(i)) continue; if (tmp_cpu_irq < CPU_IRQ(i)) { tmp_cpu_irq = CPU_IRQ(i); @@ -545,8 +557,9 @@ tryanothercpu: } if (tmp_loaded == -1) { - /* In the case of small number of heavy interrupt sources, - * loading some of the cpus too much. We use Ingo's original + /* + * In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original * approach to rotate them around. */ if (!first_attempt && imbalance >= useful_load_threshold) { @@ -555,13 +568,14 @@ tryanothercpu: } goto not_worth_the_effort; } - + first_attempt = 0; /* heaviest search */ max_cpu_irq = tmp_cpu_irq; /* load */ max_loaded = tmp_loaded; /* processor */ imbalance = (max_cpu_irq - min_cpu_irq) / 2; - - /* if imbalance is less than approx 10% of max load, then + + /* + * if imbalance is less than approx 10% of max load, then * observe diminishing returns action. - quit */ if (imbalance < (max_cpu_irq >> 3)) @@ -577,26 +591,25 @@ tryanotherirq: /* Is this an active IRQ? */ if (!irq_desc[j].action) continue; - if (imbalance <= IRQ_DELTA(max_loaded,j)) + if (imbalance <= IRQ_DELTA(max_loaded, j)) continue; /* Try to find the IRQ that is closest to the imbalance * without going over. */ - if (move_this_load < IRQ_DELTA(max_loaded,j)) { - move_this_load = IRQ_DELTA(max_loaded,j); + if (move_this_load < IRQ_DELTA(max_loaded, j)) { + move_this_load = IRQ_DELTA(max_loaded, j); selected_irq = j; } } - if (selected_irq == -1) { + if (selected_irq == -1) goto tryanothercpu; - } imbalance = move_this_load; - + /* For physical_balance case, we accumulated both load * values in the one of the siblings cpu_irq[], * to use the same code for physical and logical processors - * as much as possible. + * as much as possible. * * NOTE: the cpu_irq[] array holds the sum of the load for * sibling A and sibling B in the slot for the lowest numbered @@ -625,11 +638,11 @@ tryanotherirq: /* mark for change destination */ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); - /* Since we made a change, come back sooner to + /* Since we made a change, come back sooner to * check for more variation. */ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } goto tryanotherirq; @@ -640,7 +653,7 @@ not_worth_the_effort: * upward */ balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, - balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); return; } @@ -679,13 +692,13 @@ static int __init balanced_irq_init(void) cpumask_t tmp; cpus_shift_right(tmp, cpu_online_map, 2); - c = &boot_cpu_data; + c = &boot_cpu_data; /* When not overwritten by the command line ask subarchitecture. */ if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) irqbalance_disabled = NO_BALANCE_IRQ; if (irqbalance_disabled) return 0; - + /* disable irqbalance completely if there is only one processor online */ if (num_online_cpus() < 2) { irqbalance_disabled = 1; @@ -699,16 +712,14 @@ static int __init balanced_irq_init(void) physical_balance = 1; for_each_online_cpu(i) { - irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { printk(KERN_ERR "balanced_irq_init: out of memory"); goto failed; } - memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); } - + printk(KERN_INFO "Starting balanced_irq\n"); if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) return 0; @@ -748,7 +759,7 @@ void send_IPI_self(int vector) /* * Send the IPI. The write to APIC_ICR fires this off. */ - apic_write_around(APIC_ICR, cfg); + apic_write(APIC_ICR, cfg); } #endif /* !CONFIG_SMP */ @@ -801,10 +812,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -818,13 +829,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -834,17 +845,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; - for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + for (apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -864,28 +875,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " "slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i, apic, mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -900,7 +911,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); /* - * This function currently is only a helper for the i386 smp boot process where + * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ @@ -952,7 +963,7 @@ static int EISA_ELCR(unsigned int irq) * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, @@ -969,118 +980,115 @@ static int EISA_ELCR(unsigned int irq) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { + case 0: /* conforms, ie. bus-type dependent polarity */ { - case 0: /* conforms, ie. bus-type dependent polarity */ - { - polarity = test_bit(bus, mp_bus_not_pci)? - default_ISA_polarity(idx): - default_PCI_polarity(idx); - break; - } - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } + polarity = test_bit(bus, mp_bus_not_pci)? + default_ISA_polarity(idx): + default_PCI_polarity(idx); + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } } return polarity; } static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { + case 0: /* conforms, ie. bus-type dependent */ { - case 0: /* conforms, ie. bus-type dependent */ - { - trigger = test_bit(bus, mp_bus_not_pci)? - default_ISA_trigger(idx): - default_PCI_trigger(idx); + trigger = test_bit(bus, mp_bus_not_pci)? + default_ISA_trigger(idx): + default_PCI_trigger(idx); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } -#endif + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ break; } - case 1: /* edge */ + case MP_BUS_EISA: /* EISA pin */ { - trigger = 0; + trigger = default_EISA_trigger(idx); break; } - case 2: /* reserved */ + case MP_BUS_PCI: /* PCI pin */ { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; + /* set before the switch */ break; } - case 3: /* level */ + case MP_BUS_MCA: /* MCA pin */ { - trigger = 1; + trigger = default_MCA_trigger(idx); break; } - default: /* invalid */ + default: { printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; + trigger = 1; break; } } +#endif + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } return trigger; } @@ -1097,16 +1105,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; else { /* * PCI IRQs are mapped in order @@ -1148,8 +1156,8 @@ static inline int IO_APIC_irq_trigger(int irq) for (apic = 0; apic < nr_ioapics; apic++) { for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) return irq_trigger(idx); } } @@ -1164,7 +1172,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 } static int __assign_irq_vector(int irq) { - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset; int vector, offset; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); @@ -1176,7 +1184,7 @@ static int __assign_irq_vector(int irq) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; } @@ -1203,6 +1211,7 @@ static int assign_irq_vector(int irq) return vector; } + static struct irq_chip ioapic_chip; #define IOAPIC_AUTO -1 @@ -1237,25 +1246,25 @@ static void __init setup_IO_APIC_irqs(void) /* * add it to the IO-APIC irq-routing table: */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - idx = find_irq_entry(apic,pin,mp_INT); + idx = find_irq_entry(apic, pin, mp_INT); if (idx == -1) { if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", - mp_ioapics[apic].mpc_apicid, + mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else apic_printk(APIC_VERBOSE, ", %d-%d", - mp_ioapics[apic].mpc_apicid, pin); + mp_ioapics[apic].mp_apicid, pin); continue; } @@ -1289,7 +1298,7 @@ static void __init setup_IO_APIC_irqs(void) vector = assign_irq_vector(irq); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); - + if (!apic && (irq < 16)) disable_8259A_irq(irq); } @@ -1302,25 +1311,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin: + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -1329,20 +1334,18 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ - irq_desc[0].chip = &ioapic_chip; - set_irq_handler(0, handle_edge_irq); + ioapic_register_intr(0, vector, IOAPIC_EDGE); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } -void __init print_IO_APIC(void) + +__apicdebuginit(void) print_IO_APIC(void) { int apic, i; union IO_APIC_reg_00 reg_00; @@ -1354,10 +1357,10 @@ void __init print_IO_APIC(void) if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -1376,7 +1379,7 @@ void __init print_IO_APIC(void) reg_03.raw = io_apic_read(apic, 3); spin_unlock_irqrestore(&ioapic_lock, flags); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); @@ -1457,9 +1460,7 @@ void __init print_IO_APIC(void) return; } -#if 0 - -static void print_APIC_bitfield (int base) +__apicdebuginit(void) print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1480,17 +1481,19 @@ static void print_APIC_bitfield (int base) } } -void /*__init*/ print_local_APIC(void * dummy) +__apicdebuginit(void) print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; + u64 icr; if (apic_verbosity == APIC_QUIET) return; printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, - GET_APIC_ID(read_apic_id())); + GET_APIC_ID(v)); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1532,10 +1535,9 @@ void /*__init*/ print_local_APIC(void * dummy) printk(KERN_DEBUG "... APIC ESR: %08x\n", v); } - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); @@ -1563,12 +1565,12 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +__apicdebuginit(void) print_all_local_APICs(void) { - on_each_cpu(print_local_APIC, NULL, 1, 1); + on_each_cpu(print_local_APIC, NULL, 1); } -void /*__init*/ print_PIC(void) +__apicdebuginit(void) print_PIC(void) { unsigned int v; unsigned long flags; @@ -1586,11 +1588,11 @@ void /*__init*/ print_PIC(void) v = inb(0xa0) << 8 | inb(0x20); printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - outb(0x0b,0xa0); - outb(0x0b,0x20); + outb(0x0b, 0xa0); + outb(0x0b, 0x20); v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); + outb(0x0a, 0xa0); + outb(0x0a, 0x20); spin_unlock_irqrestore(&i8259A_lock, flags); @@ -1600,7 +1602,17 @@ void /*__init*/ print_PIC(void) printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); } -#endif /* 0 */ +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + static void __init enable_IO_APIC(void) { @@ -1626,7 +1638,7 @@ static void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { @@ -1698,8 +1710,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(read_apic_id()); + entry.dest.physical.physical_dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: @@ -1716,7 +1727,6 @@ void disable_IO_APIC(void) * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ -#ifndef CONFIG_X86_NUMAQ static void __init setup_ioapic_ids_from_mpc(void) { union IO_APIC_reg_00 reg_00; @@ -1726,6 +1736,9 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; + if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) + return; + /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. @@ -1748,15 +1761,15 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - - old_id = mp_ioapics[apic].mpc_apicid; - if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { + old_id = mp_ioapics[apic].mp_apicid; + + if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); - mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; + mp_ioapics[apic].mp_apicid = reg_00.bits.ID; } /* @@ -1765,9 +1778,9 @@ static void __init setup_ioapic_ids_from_mpc(void) * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mpc_apicid)) { + mp_ioapics[apic].mp_apicid)) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; @@ -1776,13 +1789,13 @@ static void __init setup_ioapic_ids_from_mpc(void) printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); - mp_ioapics[apic].mpc_apicid = i; + mp_ioapics[apic].mp_apicid = i; } else { physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); + tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); physids_or(phys_id_present_map, phys_id_present_map, tmp); } @@ -1791,21 +1804,21 @@ static void __init setup_ioapic_ids_from_mpc(void) * We need to adjust the IRQ routing table * if the ID changed. */ - if (old_id != mp_ioapics[apic].mpc_apicid) + if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; + if (mp_irqs[i].mp_dstapic == old_id) + mp_irqs[i].mp_dstapic + = mp_ioapics[apic].mp_apicid; /* * Read the right value from the MPC table and * write it into the ID register. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; + reg_00.bits.ID = mp_ioapics[apic].mp_apicid; spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0, reg_00.raw); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -1816,15 +1829,12 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) + if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid) printk("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); } } -#else -static void __init setup_ioapic_ids_from_mpc(void) { } -#endif int no_timer_check __initdata; @@ -2015,45 +2025,53 @@ static inline void init_IO_APIC_traps(void) * The local APIC irq-chip implementation: */ -static void ack_apic(unsigned int irq) +static void ack_lapic_irq(unsigned int irq) { ack_APIC_irq(); } -static void mask_lapic_irq (unsigned int irq) +static void mask_lapic_irq(unsigned int irq) { unsigned long v; v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); } -static void unmask_lapic_irq (unsigned int irq) +static void unmask_lapic_irq(unsigned int irq) { unsigned long v; v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); + apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); } static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC-edge", + .name = "local-APIC", .mask = mask_lapic_irq, .unmask = unmask_lapic_irq, - .eoi = ack_apic, + .ack = ack_lapic_irq, }; +static void lapic_register_intr(int irq, int vector) +{ + irq_desc[irq].status &= ~IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, + "edge"); + set_intr_gate(vector, interrupt[irq]); +} + static void __init setup_nmi(void) { /* - * Dirty trick to enable the NMI watchdog ... + * Dirty trick to enable the NMI watchdog ... * We put the 8259A master into AEOI mode and * unmask on all local APICs LVT0 as NMI. * * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') * is from Maciej W. Rozycki - so we do not have to EOI from * the NMI handler or the timer interrupt. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); enable_NMI_through_LVT0(); @@ -2129,11 +2147,16 @@ static inline void __init unlock_ExtINT_logic(void) static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; + int no_pin1 = 0; int vector; + unsigned int ver; unsigned long flags; local_irq_save(flags); + ver = apic_read(APIC_LVR); + ver = GET_APIC_VERSION(ver); + /* * get/set the timer IRQ vector: */ @@ -2142,34 +2165,54 @@ static inline void __init check_timer(void) set_intr_gate(vector, interrupt[0]); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = 1; - if (timer_over_8254 > 0) - enable_8259A_irq(0); + timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; - printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - vector, apic1, pin1, apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + vector, apic1, pin1, apic2, pin2); + + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, vector); + } unmask_IO_APIC_irq(0); if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -2178,81 +2221,97 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " - "IO-APIC\n"); - } - - printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); - if (pin2 != -1) { - printk("\n..... (found pin %d) ...", pin2); + if (!no_pin1) + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); + + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { - printk("works.\n"); - if (pin1 != -1) - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - else - add_pin_to_irq(0, apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); + timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } - printk(" failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " + "through the IO-APIC - disabling NMI Watchdog!\n"); + nmi_watchdog = NMI_NONE; } + timer_ack = 0; - printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); - disable_8259A_irq(0); - set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, - "fasteoi"); - apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ + lapic_register_intr(0, vector); + apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ enable_8259A_irq(0); if (timer_irq_works()) { - printk(" works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); - printk(" failed.\n"); + disable_8259A_irq(0); + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); - printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); - timer_ack = 0; init_8259A(0); make_8259A_irq(0); - apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + apic_write(APIC_LVT0, APIC_DM_EXTINT); unlock_ExtINT_logic(); if (timer_irq_works()) { - printk(" works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } - printk(" failed :(.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " - "report. Then try booting with the 'noapic' option"); + "report. Then try booting with the 'noapic' option.\n"); out: local_irq_restore(flags); } /* - * - * IRQ's that are handled by the PIC in the MPS IOAPIC case. - * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. - * Linux doesn't really care, as it's not actually used - * for any interrupt handling anyway. + * Traditionally ISA IRQ2 is the cascade IRQ, and is not available + * to devices. However there may be an I/O APIC pin available for + * this interrupt regardless. The pin may be left unconnected, but + * typically it will be reused as an ExtINT cascade interrupt for + * the master 8259A. In the MPS case such a pin will normally be + * reported as an ExtINT interrupt in the MP table. With ACPI + * there is no provision for ExtINT interrupts, and in the absence + * of an override it would be treated as an ordinary ISA I/O APIC + * interrupt, that is edge-triggered and unmasked by default. We + * used to do this, but it caused problems on some systems because + * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using + * the same ExtINT cascade interrupt to drive the local APIC of the + * bootstrap processor. Therefore we refrain from routing IRQ2 to + * the I/O APIC in all cases now. No actual device should request + * it anyway. --macro */ #define PIC_IRQS (1 << PIC_CASCADE_IR) @@ -2261,15 +2320,12 @@ void __init setup_IO_APIC(void) int i; /* Reserve all the system vectors. */ - for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++) + for (i = first_system_vector; i < NR_VECTORS; i++) set_bit(i, used_vectors); enable_IO_APIC(); - if (acpi_ioapic) - io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ - else - io_apic_irqs = ~PIC_IRQS; + io_apic_irqs = ~PIC_IRQS; printk("ENABLING IO-APIC IRQs\n"); @@ -2282,32 +2338,16 @@ void __init setup_IO_APIC(void) setup_IO_APIC_irqs(); init_IO_APIC_traps(); check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); } -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path */ - + static int __init io_apic_bug_finalize(void) { - if(sis_apic_bug == -1) + if (sis_apic_bug == -1) sis_apic_bug = 0; return 0; } @@ -2318,17 +2358,17 @@ struct sysfs_ioapic_data { struct sys_device dev; struct IO_APIC_route_entry entry[0]; }; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; +static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS]; static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) entry[i] = ioapic_read_entry(dev->id, i); return 0; @@ -2341,18 +2381,18 @@ static int ioapic_resume(struct sys_device *dev) unsigned long flags; union IO_APIC_reg_00 reg_00; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) ioapic_write_entry(dev->id, i, entry[i]); return 0; @@ -2366,24 +2406,23 @@ static struct sysdev_class ioapic_sysdev_class = { static int __init ioapic_init_sysfs(void) { - struct sys_device * dev; + struct sys_device *dev; int i, size, error = 0; error = sysdev_class_register(&ioapic_sysdev_class); if (error) return error; - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] + for (i = 0; i < nr_ioapics; i++) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); if (!mp_ioapic_data[i]) { printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); continue; } - memset(mp_ioapic_data[i], 0, size); dev = &mp_ioapic_data[i]->dev; - dev->id = i; + dev->id = i; dev->cls = &ioapic_sysdev_class; error = sysdev_register(dev); if (error) { @@ -2458,7 +2497,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: +MSI_ADDR_DEST_MODE_PHYSICAL: MSI_ADDR_DEST_MODE_LOGICAL) | ((INT_DELIVERY_MODE != dest_LowestPrio) ? MSI_ADDR_REDIRECTION_CPU: @@ -2469,7 +2508,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: +MSI_DATA_DELIVERY_FIXED: MSI_DATA_DELIVERY_LOWPRI) | MSI_DATA_VECTOR(vector); } @@ -2640,12 +2679,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) #endif /* CONFIG_HT_IRQ */ /* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration + ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -int __init io_apic_get_unique_id (int ioapic, int apic_id) +int __init io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; @@ -2654,10 +2693,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) int i = 0; /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. - * + * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ @@ -2676,7 +2715,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } /* - * Every APIC in a system must have a unique ID or we get lots of nice + * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(apic_id_map, apic_id)) { @@ -2693,7 +2732,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) "trying %d\n", ioapic, apic_id, i); apic_id = i; - } + } tmp = apicid_to_cpu_present(apic_id); physids_or(apic_id_map, apic_id_map, tmp); @@ -2720,7 +2759,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } -int __init io_apic_get_version (int ioapic) +int __init io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2733,7 +2772,7 @@ int __init io_apic_get_version (int ioapic) } -int __init io_apic_get_redir_entries (int ioapic) +int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2746,7 +2785,7 @@ int __init io_apic_get_redir_entries (int ioapic) } -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low) { struct IO_APIC_route_entry entry; @@ -2762,7 +2801,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * corresponding device driver registers for this IRQ. */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; @@ -2781,7 +2820,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, - mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, + mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq, edge_level, active_high_low); ioapic_register_intr(irq, entry.vector, edge_level); @@ -2802,8 +2841,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; @@ -2836,3 +2875,34 @@ static int __init parse_noapic(char *arg) return 0; } early_param("noapic", parse_noapic); + +void __init ioapic_init_mappings(void) +{ + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + int i; + + for (i = 0; i < nr_ioapics; i++) { + if (smp_found_config) { + ioapic_phys = mp_ioapics[i].mp_apicaddr; + if (!ioapic_phys) { + printk(KERN_ERR + "WARNING: bogus zero IO-APIC " + "address found in MPTABLE, " + "disabling IO/APIC support!\n"); + smp_found_config = 0; + skip_ioapic_setup = 1; + goto fake_ioapic_page; + } + } else { +fake_ioapic_page: + ioapic_phys = (unsigned long) + alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + set_fixmap_nocache(idx, ioapic_phys); + printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", + __fix_to_virt(idx), ioapic_phys); + idx++; + } +} + diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc52..02063ae042f 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -37,6 +37,7 @@ #include <acpi/acpi_bus.h> #endif #include <linux/bootmem.h> +#include <linux/dmar.h> #include <asm/idle.h> #include <asm/io.h> @@ -45,13 +46,17 @@ #include <asm/proto.h> #include <asm/acpi.h> #include <asm/dma.h> +#include <asm/i8259.h> #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/irq_remapping.h> #include <mach_ipi.h> #include <mach_apic.h> +#define __apicdebuginit(type) static type __init + struct irq_cfg { cpumask_t domain; cpumask_t old_domain; @@ -61,7 +66,7 @@ struct irq_cfg { }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { +static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, @@ -82,7 +87,9 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { static int assign_irq_vector(int irq, cpumask_t mask); -#define __apicdebuginit __init +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; int sis_apic_bug; /* not actually supported, dummy for compile */ @@ -90,29 +97,34 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); -DEFINE_SPINLOCK(vector_lock); +static DEFINE_SPINLOCK(vector_lock); /* * # of IRQ routing registers */ int nr_ioapic_registers[MAX_IO_APICS]; +/* I/O APIC RTE contents at the OS boot up */ +struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; + /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -140,7 +152,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -183,7 +195,7 @@ static bool io_apic_level_ack_pending(unsigned int irq) break; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ - if ((reg >> 14) & 1) { + if (reg & IO_APIC_REDIR_REMOTE_IRR) { spin_unlock_irqrestore(&ioapic_lock, flags); return true; } @@ -296,9 +308,14 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) pin = entry->pin; if (pin == -1) break; - io_apic_write(apic, 0x11 + pin*2, dest); + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~0x000000ff; + reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, reg); if (!entry->next) @@ -360,16 +377,37 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + #define DO_ACTION(name,R,ACTION, FINAL) \ \ static void name##_IO_APIC_irq (unsigned int irq) \ __DO_ACTION(R, ACTION, FINAL) -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ +/* mask = 1 */ +DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic)) + +/* mask = 0 */ +DO_ACTION(__unmask, 0, &= ~IO_APIC_REDIR_MASKED, ) static void mask_IO_APIC_irq (unsigned int irq) { @@ -412,6 +450,69 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +/* + * Saves and masks all the unmasked IO-APIC RTE's + */ +int save_mask_IO_APIC_setup(void) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + int apic, pin; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + + for (apic = 0; apic < nr_ioapics; apic++) { + early_ioapic_entries[apic] = + kzalloc(sizeof(struct IO_APIC_route_entry) * + nr_ioapic_registers[apic], GFP_KERNEL); + if (!early_ioapic_entries[apic]) + return -ENOMEM; + } + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + + entry = early_ioapic_entries[apic][pin] = + ioapic_read_entry(apic, pin); + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + } + } + return 0; +} + +void restore_IO_APIC_setup(void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + ioapic_write_entry(apic, pin, + early_ioapic_entries[apic][pin]); +} + +void reinit_intr_remapped_IO_APIC(int intr_remapping) +{ + /* + * for now plain restore of previous settings. + * TBD: In the case of OS enabling interrupt-remapping, + * IO-APIC RTE's need to be setup to point to interrupt-remapping + * table entries. for now, do a plain restore, and wait for + * the setup_IO_APIC_irqs() to do proper initialization. + */ + restore_IO_APIC_setup(); +} + int skip_ioapic_setup; int ioapic_force; @@ -430,20 +531,6 @@ static int __init disable_timer_pin_setup(char *arg) } __setup("disable_timer_pin_1", disable_timer_pin_setup); -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Find the IRQ entry number of a certain pin. @@ -453,10 +540,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -470,13 +557,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -486,17 +573,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -516,28 +603,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -565,13 +652,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) @@ -607,13 +694,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ if (test_bit(bus, mp_bus_not_pci)) @@ -660,16 +747,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; } else { /* * PCI IRQs are mapped in order @@ -683,6 +770,19 @@ static int pin_2_irq(int idx, int apic, int pin) return irq; } +void lock_vector_lock(void) +{ + /* Used to the online set of cpus does not change + * during assign_irq_vector. + */ + spin_lock(&vector_lock); +} + +void unlock_vector_lock(void) +{ + spin_unlock(&vector_lock); +} + static int __assign_irq_vector(int irq, cpumask_t mask) { /* @@ -718,7 +818,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask) return 0; } - for_each_cpu_mask(cpu, mask) { + for_each_cpu_mask_nr(cpu, mask) { cpumask_t domain, new_mask; int new_cpu; int vector, offset; @@ -730,7 +830,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { /* If we run out of vectors on large boxen, must share them. */ offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; @@ -739,7 +839,7 @@ next: continue; if (vector == IA32_SYSCALL_VECTOR) goto next; - for_each_cpu_mask(new_cpu, new_mask) + for_each_cpu_mask_nr(new_cpu, new_mask) if (per_cpu(vector_irq, new_cpu)[vector] != -1) goto next; /* Found one! */ @@ -749,7 +849,7 @@ next: cfg->move_in_progress = 1; cfg->old_domain = cfg->domain; } - for_each_cpu_mask(new_cpu, new_mask) + for_each_cpu_mask_nr(new_cpu, new_mask) per_cpu(vector_irq, new_cpu)[vector] = irq; cfg->vector = vector; cfg->domain = domain; @@ -781,7 +881,7 @@ static void __clear_irq_vector(int irq) vector = cfg->vector; cpus_and(mask, cfg->domain, cpu_online_map); - for_each_cpu_mask(cpu, mask) + for_each_cpu_mask_nr(cpu, mask) per_cpu(vector_irq, cpu)[vector] = -1; cfg->vector = 0; @@ -811,20 +911,99 @@ void __setup_vector_irq(int cpu) } } - static struct irq_chip ioapic_chip; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip; +#endif static void ioapic_register_intr(int irq, unsigned long trigger) { - if (trigger) { + if (trigger) irq_desc[irq].status |= IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, "fasteoi"); - } else { + else irq_desc[irq].status &= ~IRQ_LEVEL; + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + irq_desc[irq].status |= IRQ_MOVE_PCNTXT; + if (trigger) + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_edge_irq, "edge"); + return; + } +#endif + if (trigger) + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); +} + +static int setup_ioapic_entry(int apic, int irq, + struct IO_APIC_route_entry *entry, + unsigned int destination, int trigger, + int polarity, int vector) +{ + /* + * add it to the IO-APIC irq-routing table: + */ + memset(entry,0,sizeof(*entry)); + +#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) { + struct intel_iommu *iommu = map_ioapic_to_ir(apic); + struct irte irte; + struct IR_IO_APIC_route_entry *ir_entry = + (struct IR_IO_APIC_route_entry *) entry; + int index; + + if (!iommu) + panic("No mapping iommu for ioapic %d\n", apic); + + index = alloc_irte(iommu, irq, 1); + if (index < 0) + panic("Failed to allocate IRTE for ioapic %d\n", apic); + + memset(&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = trigger; + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = vector; + irte.dest_id = IRTE_DEST(destination); + + modify_irte(irq, &irte); + + ir_entry->index2 = (index >> 15) & 0x1; + ir_entry->zero = 0; + ir_entry->format = 1; + ir_entry->index = (index & 0x7fff); + } else +#endif + { + entry->delivery_mode = INT_DELIVERY_MODE; + entry->dest_mode = INT_DEST_MODE; + entry->dest = destination; } + + entry->mask = 0; /* enable IRQ */ + entry->trigger = trigger; + entry->polarity = polarity; + entry->vector = vector; + + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (trigger) + entry->mask = 1; + return 0; } static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, @@ -846,27 +1025,18 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector, + apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest = cpu_mask_to_apicid(mask); - entry.mask = 0; /* enable IRQ */ - entry.trigger = trigger; - entry.polarity = polarity; - entry.vector = cfg->vector; - - /* Mask level triggered irqs. - * Use IRQ_DELAYED_DISABLE for edge triggered irqs. - */ - if (trigger) - entry.mask = 1; + if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry, + cpu_mask_to_apicid(mask), trigger, polarity, + cfg->vector)) { + printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mp_ioapics[apic].mp_apicid, pin); + __clear_irq_vector(irq); + return; + } ioapic_register_intr(irq, trigger); if (irq < 16) @@ -887,10 +1057,10 @@ static void __init setup_IO_APIC_irqs(void) idx = find_irq_entry(apic,pin,mp_INT); if (idx == -1) { if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin); continue; } if (!first_notcon) { @@ -911,26 +1081,24 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; - memset(&entry, 0, sizeof(entry)); - - disable_8259A_irq(0); + if (intr_remapping_enabled) + return; - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -939,7 +1107,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); @@ -947,11 +1115,10 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } -void __apicdebuginit print_IO_APIC(void) + +__apicdebuginit(void) print_IO_APIC(void) { int apic, i; union IO_APIC_reg_00 reg_00; @@ -965,7 +1132,7 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -983,7 +1150,7 @@ void __apicdebuginit print_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); @@ -1045,9 +1212,7 @@ void __apicdebuginit print_IO_APIC(void) return; } -#if 0 - -static __apicdebuginit void print_APIC_bitfield (int base) +__apicdebuginit(void) print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1068,16 +1233,18 @@ static __apicdebuginit void print_APIC_bitfield (int base) } } -void __apicdebuginit print_local_APIC(void * dummy) +__apicdebuginit(void) print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; + unsigned long icr; if (apic_verbosity == APIC_QUIET) return; printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); + v = apic_read(APIC_ID); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1113,10 +1280,9 @@ void __apicdebuginit print_local_APIC(void * dummy) v = apic_read(APIC_ESR); printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32)); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); @@ -1144,12 +1310,12 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +__apicdebuginit(void) print_all_local_APICs(void) { - on_each_cpu(print_local_APIC, NULL, 1, 1); + on_each_cpu(print_local_APIC, NULL, 1); } -void __apicdebuginit print_PIC(void) +__apicdebuginit(void) print_PIC(void) { unsigned int v; unsigned long flags; @@ -1181,7 +1347,17 @@ void __apicdebuginit print_PIC(void) printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); } -#endif /* 0 */ +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + void __init enable_IO_APIC(void) { @@ -1271,7 +1447,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest = GET_APIC_ID(read_apic_id()); + entry.dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: @@ -1358,12 +1534,10 @@ static unsigned int startup_ioapic_irq(unsigned int irq) static int ioapic_retrigger_irq(unsigned int irq) { struct irq_cfg *cfg = &irq_cfg[irq]; - cpumask_t mask; unsigned long flags; spin_lock_irqsave(&vector_lock, flags); - mask = cpumask_of_cpu(first_cpu(cfg->domain)); - send_IPI_mask(mask, cfg->vector); + send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector); spin_unlock_irqrestore(&vector_lock, flags); return 1; @@ -1379,6 +1553,147 @@ static int ioapic_retrigger_irq(unsigned int irq) */ #ifdef CONFIG_SMP + +#ifdef CONFIG_INTR_REMAP +static void ir_irq_migration(struct work_struct *work); + +static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration); + +/* + * Migrate the IO-APIC irq in the presence of intr-remapping. + * + * For edge triggered, irq migration is a simple atomic update(of vector + * and cpu destination) of IRTE and flush the hardware cache. + * + * For level triggered, we need to modify the io-apic RTE aswell with the update + * vector information, along with modifying IRTE with vector and destination. + * So irq migration for level triggered is little bit more complex compared to + * edge triggered migration. But the good news is, we use the same algorithm + * for level triggered migration as we have today, only difference being, + * we now initiate the irq migration from process context instead of the + * interrupt context. + * + * In future, when we do a directed EOI (combined with cpu EOI broadcast + * suppression) to the IO-APIC, level triggered irq migration will also be + * as simple as edge triggered migration and we can do the irq migration + * with a simple atomic update to IO-APIC RTE. + */ +static void migrate_ioapic_irq(int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct irq_desc *desc = irq_desc + irq; + cpumask_t tmp, cleanup_mask; + struct irte irte; + int modify_ioapic_rte = desc->status & IRQ_LEVEL; + unsigned int dest; + unsigned long flags; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + if (modify_ioapic_rte) { + spin_lock_irqsave(&ioapic_lock, flags); + __target_IO_APIC_irq(irq, dest, cfg->vector); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * Modified the IRTE and flushes the Interrupt entry cache. + */ + modify_irte(irq, &irte); + + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} + +static int migrate_irq_remapped_level(int irq) +{ + int ret = -1; + + mask_IO_APIC_irq(irq); + + if (io_apic_level_ack_pending(irq)) { + /* + * Interrupt in progress. Migrating irq now will change the + * vector information in the IO-APIC RTE and that will confuse + * the EOI broadcast performed by cpu. + * So, delay the irq migration to the next instance. + */ + schedule_delayed_work(&ir_migration_work, 1); + goto unmask; + } + + /* everthing is clear. we have right of way */ + migrate_ioapic_irq(irq, irq_desc[irq].pending_mask); + + ret = 0; + irq_desc[irq].status &= ~IRQ_MOVE_PENDING; + cpus_clear(irq_desc[irq].pending_mask); + +unmask: + unmask_IO_APIC_irq(irq); + return ret; +} + +static void ir_irq_migration(struct work_struct *work) +{ + int irq; + + for (irq = 0; irq < NR_IRQS; irq++) { + struct irq_desc *desc = irq_desc + irq; + if (desc->status & IRQ_MOVE_PENDING) { + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + if (!desc->chip->set_affinity || + !(desc->status & IRQ_MOVE_PENDING)) { + desc->status &= ~IRQ_MOVE_PENDING; + spin_unlock_irqrestore(&desc->lock, flags); + continue; + } + + desc->chip->set_affinity(irq, + irq_desc[irq].pending_mask); + spin_unlock_irqrestore(&desc->lock, flags); + } + } +} + +/* + * Migrates the IRQ destination in the process context. + */ +static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + if (irq_desc[irq].status & IRQ_LEVEL) { + irq_desc[irq].status |= IRQ_MOVE_PENDING; + irq_desc[irq].pending_mask = mask; + migrate_irq_remapped_level(irq); + return; + } + + migrate_ioapic_irq(irq, mask); +} +#endif + asmlinkage void smp_irq_move_cleanup_interrupt(void) { unsigned vector, me; @@ -1435,6 +1750,17 @@ static void irq_complete_move(unsigned int irq) #else static inline void irq_complete_move(unsigned int irq) {} #endif +#ifdef CONFIG_INTR_REMAP +static void ack_x2apic_level(unsigned int irq) +{ + ack_x2APIC_irq(); +} + +static void ack_x2apic_edge(unsigned int irq) +{ + ack_x2APIC_irq(); +} +#endif static void ack_apic_edge(unsigned int irq) { @@ -1509,6 +1835,21 @@ static struct irq_chip ioapic_chip __read_mostly = { .retrigger = ioapic_retrigger_irq, }; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip __read_mostly = { + .name = "IR-IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_x2apic_edge, + .eoi = ack_x2apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ir_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; +#endif + static inline void init_IO_APIC_traps(void) { int irq; @@ -1540,7 +1881,7 @@ static inline void init_IO_APIC_traps(void) } } -static void enable_lapic_irq (unsigned int irq) +static void unmask_lapic_irq(unsigned int irq) { unsigned long v; @@ -1548,7 +1889,7 @@ static void enable_lapic_irq (unsigned int irq) apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); } -static void disable_lapic_irq (unsigned int irq) +static void mask_lapic_irq(unsigned int irq) { unsigned long v; @@ -1561,19 +1902,20 @@ static void ack_lapic_irq (unsigned int irq) ack_APIC_irq(); } -static void end_lapic_irq (unsigned int i) { /* nothing */ } - -static struct hw_interrupt_type lapic_irq_type __read_mostly = { - .name = "local-APIC", - .typename = "local-APIC-edge", - .startup = NULL, /* startup_irq() not used for IRQ0 */ - .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ - .enable = enable_lapic_irq, - .disable = disable_lapic_irq, - .ack = ack_lapic_irq, - .end = end_lapic_irq, +static struct irq_chip lapic_chip __read_mostly = { + .name = "local-APIC", + .mask = mask_lapic_irq, + .unmask = unmask_lapic_irq, + .ack = ack_lapic_irq, }; +static void lapic_register_intr(int irq) +{ + irq_desc[irq].status &= ~IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, + "edge"); +} + static void __init setup_nmi(void) { /* @@ -1659,6 +2001,7 @@ static inline void __init check_timer(void) struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; unsigned long flags; + int no_pin1 = 0; local_irq_save(flags); @@ -1669,34 +2012,50 @@ static inline void __init check_timer(void) assign_irq_vector(0, TARGET_CPUS); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; - apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - cfg->vector, apic1, pin1, apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + cfg->vector, apic1, pin1, apic2, pin2); + + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + if (intr_remapping_enabled) + panic("BIOS bug: timer not connected to IO-APIC"); + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + } unmask_IO_APIC_irq(0); if (!no_timer_check && timer_irq_works()) { - nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -1704,55 +2063,65 @@ static inline void __init check_timer(void) clear_IO_APIC_pin(0, pin1); goto out; } + if (intr_remapping_enabled) + panic("timer doesn't work through Interrupt-remapped IO-APIC"); clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } - - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { - apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", - apic2, pin2); + if (!no_pin1) + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); + + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - nmi_watchdog_default(); + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); + timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } - apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " + "through the IO-APIC - disabling NMI Watchdog!\n"); + nmi_watchdog = NMI_NONE; } - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); - disable_8259A_irq(0); - irq_desc[0].chip = &lapic_irq_type; + lapic_register_intr(0); apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ enable_8259A_irq(0); if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } + disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); - apic_printk(APIC_VERBOSE," failed.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); init_8259A(0); make_8259A_irq(0); @@ -1761,11 +2130,12 @@ static inline void __init check_timer(void) unlock_ExtINT_logic(); if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } - apic_printk(APIC_VERBOSE," failed :(.\n"); - panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option.\n"); out: local_irq_restore(flags); } @@ -1778,11 +2148,21 @@ static int __init notimercheck(char *s) __setup("no_timer_check", notimercheck); /* - * - * IRQs that are handled by the PIC in the MPS IOAPIC case. - * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. - * Linux doesn't really care, as it's not actually used - * for any interrupt handling anyway. + * Traditionally ISA IRQ2 is the cascade IRQ, and is not available + * to devices. However there may be an I/O APIC pin available for + * this interrupt regardless. The pin may be left unconnected, but + * typically it will be reused as an ExtINT cascade interrupt for + * the master 8259A. In the MPS case such a pin will normally be + * reported as an ExtINT interrupt in the MP table. With ACPI + * there is no provision for ExtINT interrupts, and in the absence + * of an override it would be treated as an ordinary ISA I/O APIC + * interrupt, that is edge-triggered and unmasked by default. We + * used to do this, but it caused problems on some systems because + * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using + * the same ExtINT cascade interrupt to drive the local APIC of the + * bootstrap processor. Therefore we refrain from routing IRQ2 to + * the I/O APIC in all cases now. No actual device should request + * it anyway. --macro */ #define PIC_IRQS (1<<2) @@ -1793,10 +2173,7 @@ void __init setup_IO_APIC(void) * calling enable_IO_APIC() is moved to setup_local_APIC for BP */ - if (acpi_ioapic) - io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ - else - io_apic_irqs = ~PIC_IRQS; + io_apic_irqs = ~PIC_IRQS; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); @@ -1804,8 +2181,6 @@ void __init setup_IO_APIC(void) setup_IO_APIC_irqs(); init_IO_APIC_traps(); check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); } struct sysfs_ioapic_data { @@ -1841,8 +2216,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -1927,6 +2302,9 @@ void destroy_irq(unsigned int irq) dynamic_irq_cleanup(irq); +#ifdef CONFIG_INTR_REMAP + free_irte(irq); +#endif spin_lock_irqsave(&vector_lock, flags); __clear_irq_vector(irq); spin_unlock_irqrestore(&vector_lock, flags); @@ -1945,10 +2323,41 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms tmp = TARGET_CPUS; err = assign_irq_vector(irq, tmp); - if (!err) { - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); + if (err) + return err; + + cpus_and(tmp, cfg->domain, tmp); + dest = cpu_mask_to_apicid(tmp); + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + struct irte irte; + int ir_index; + u16 sub_handle; + + ir_index = map_irq_to_irte_handle(irq, &sub_handle); + BUG_ON(ir_index == -1); + + memset (&irte, 0, sizeof(irte)); + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = 0; /* edge */ + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + modify_irte(irq, &irte); + + msg->address_hi = MSI_ADDR_BASE_HI; + msg->data = sub_handle; + msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | + MSI_ADDR_IR_SHV | + MSI_ADDR_IR_INDEX1(ir_index) | + MSI_ADDR_IR_INDEX2(ir_index); + } else +#endif + { msg->address_hi = MSI_ADDR_BASE_HI; msg->address_lo = MSI_ADDR_BASE_LO | @@ -1999,6 +2408,55 @@ static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) write_msi_msg(irq, &msg); irq_desc[irq].affinity = mask; } + +#ifdef CONFIG_INTR_REMAP +/* + * Migrate the MSI irq to another cpumask. This migration is + * done in the process context using interrupt-remapping hardware. + */ +static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned int dest; + cpumask_t tmp, cleanup_mask; + struct irte irte; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * atomically update the IRTE with the new destination and vector. + */ + modify_irte(irq, &irte); + + /* + * After this point, all the interrupts will start arriving + * at the new destination. So, time to cleanup the previous + * vector allocation. + */ + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} +#endif #endif /* CONFIG_SMP */ /* @@ -2016,26 +2474,157 @@ static struct irq_chip msi_chip = { .retrigger = ioapic_retrigger_irq, }; -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +#ifdef CONFIG_INTR_REMAP +static struct irq_chip msi_ir_chip = { + .name = "IR-PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, + .ack = ack_x2apic_edge, +#ifdef CONFIG_SMP + .set_affinity = ir_set_msi_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +/* + * Map the PCI dev to the corresponding remapping hardware unit + * and allocate 'nvec' consecutive interrupt-remapping table entries + * in it. + */ +static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec) +{ + struct intel_iommu *iommu; + int index; + + iommu = map_dev_to_ir(dev); + if (!iommu) { + printk(KERN_ERR + "Unable to map PCI %s to iommu\n", pci_name(dev)); + return -ENOENT; + } + + index = alloc_irte(iommu, irq, nvec); + if (index < 0) { + printk(KERN_ERR + "Unable to allocate %d IRTE for PCI %s\n", nvec, + pci_name(dev)); + return -ENOSPC; + } + return index; +} +#endif + +static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq) { + int ret; struct msi_msg msg; + + ret = msi_compose_msg(dev, irq, &msg); + if (ret < 0) + return ret; + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + struct irq_desc *desc = irq_desc + irq; + /* + * irq migration in process context + */ + desc->status |= IRQ_MOVE_PCNTXT; + set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge"); + } else +#endif + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); + + return 0; +} + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ int irq, ret; + irq = create_irq(); if (irq < 0) return irq; - ret = msi_compose_msg(dev, irq, &msg); +#ifdef CONFIG_INTR_REMAP + if (!intr_remapping_enabled) + goto no_ir; + + ret = msi_alloc_irte(dev, irq, 1); + if (ret < 0) + goto error; +no_ir: +#endif + ret = setup_msi_irq(dev, desc, irq); if (ret < 0) { destroy_irq(irq); return ret; } + return 0; - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); +#ifdef CONFIG_INTR_REMAP +error: + destroy_irq(irq); + return ret; +#endif +} - set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int irq, ret, sub_handle; + struct msi_desc *desc; +#ifdef CONFIG_INTR_REMAP + struct intel_iommu *iommu = 0; + int index = 0; +#endif + + sub_handle = 0; + list_for_each_entry(desc, &dev->msi_list, list) { + irq = create_irq(); + if (irq < 0) + return irq; +#ifdef CONFIG_INTR_REMAP + if (!intr_remapping_enabled) + goto no_ir; + if (!sub_handle) { + /* + * allocate the consecutive block of IRTE's + * for 'nvec' + */ + index = msi_alloc_irte(dev, irq, nvec); + if (index < 0) { + ret = index; + goto error; + } + } else { + iommu = map_dev_to_ir(dev); + if (!iommu) { + ret = -ENOENT; + goto error; + } + /* + * setup the mapping between the irq and the IRTE + * base index, the sub_handle pointing to the + * appropriate interrupt remap table entry. + */ + set_irte_irq(irq, iommu, index, sub_handle); + } +no_ir: +#endif + ret = setup_msi_irq(dev, desc, irq); + if (ret < 0) + goto error; + sub_handle++; + } return 0; + +error: + destroy_irq(irq); + return ret; } void arch_teardown_msi_irq(unsigned int irq) @@ -2242,8 +2831,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; @@ -2283,6 +2872,10 @@ void __init setup_ioapic_dest(void) setup_IO_APIC_irq(ioapic, pin, irq, irq_trigger(irq_entry), irq_polarity(irq_entry)); +#ifdef CONFIG_INTR_REMAP + else if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); +#endif else set_ioapic_affinity_irq(irq, TARGET_CPUS); } @@ -2336,7 +2929,7 @@ void __init ioapic_init_mappings(void) ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; } else { ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c index 5921e5f0a64..720d2607aac 100644 --- a/arch/x86/kernel/io_delay.c +++ b/arch/x86/kernel/io_delay.c @@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "30BF") } }, + { + .callback = dmi_io_delay_0xed_port, + .ident = "Presario F700", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"), + DMI_MATCH(DMI_BOARD_NAME, "30D3") + } + }, { } }; @@ -103,6 +111,9 @@ void __init io_delay_init(void) static int __init io_delay_param(char *s) { + if (!s) + return -EINVAL; + if (!strcmp(s, "0x80")) io_delay_type = CONFIG_IO_DELAY_TYPE_0X80; else if (!strcmp(s, "0xed")) diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c index 50e5e4a31c8..19191430274 100644 --- a/arch/x86/kernel/ioport.c +++ b/arch/x86/kernel/ioport.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/thread_info.h> #include <linux/syscalls.h> +#include <asm/syscalls.h> /* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ static void set_bitmap(unsigned long *bitmap, unsigned int base, diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b89ca2..f1c688e46f3 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/cache.h> -#include <linux/interrupt.h> #include <linux/cpu.h> #include <linux/module.h> @@ -21,6 +20,8 @@ #ifdef CONFIG_X86_32 #include <mach_apic.h> +#include <mach_ipi.h> + /* * the following functions deal with sending IPIs between CPUs. * @@ -71,7 +72,7 @@ void __send_IPI_shortcut(unsigned int shortcut, int vector) /* * Send the IPI. The write to APIC_ICR fires this off. */ - apic_write_around(APIC_ICR, cfg); + apic_write(APIC_ICR, cfg); } void send_IPI_self(int vector) @@ -99,7 +100,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector) * prepare target chip field */ cfg = __prepare_ICR2(mask); - apic_write_around(APIC_ICR2, cfg); + apic_write(APIC_ICR2, cfg); /* * program the ICR @@ -109,7 +110,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector) /* * Send the IPI. The write to APIC_ICR fires this off. */ - apic_write_around(APIC_ICR, cfg); + apic_write(APIC_ICR, cfg); } /* @@ -148,7 +149,6 @@ void send_IPI_mask_sequence(cpumask_t mask, int vector) } /* must come after the send_IPI functions above for inlining */ -#include <mach_ipi.h> static int convert_apicid_to_cpu(int apic_id) { int i; diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b..b71e02d42f4 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq) #endif } +#ifdef CONFIG_DEBUG_STACKOVERFLOW +/* Debugging check for stack overflow: is there less than 1KB free? */ +static int check_stack_overflow(void) +{ + long sp; + + __asm__ __volatile__("andl %%esp,%0" : + "=r" (sp) : "0" (THREAD_SIZE - 1)); + + return sp < (sizeof(struct thread_info) + STACK_WARN); +} + +static void print_stack_overflow(void) +{ + printk(KERN_WARNING "low stack detected by irq handler\n"); + dump_stack(); +} + +#else +static inline int check_stack_overflow(void) { return 0; } +static inline void print_stack_overflow(void) { } +#endif + #ifdef CONFIG_4KSTACKS /* * per-CPU IRQ handling contexts (thread information and stack) @@ -59,48 +82,26 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -#endif - -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - */ -unsigned int do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs; - /* high bit used in ret_from_ code */ - int irq = ~regs->orig_ax; - struct irq_desc *desc = irq_desc + irq; -#ifdef CONFIG_4KSTACKS - union irq_ctx *curctx, *irqctx; - u32 *isp; -#endif - if (unlikely((unsigned)irq >= NR_IRQS)) { - printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __func__, irq); - BUG(); - } +static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss; +static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss; - old_regs = set_irq_regs(regs); - irq_enter(); -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 1KB free? */ - { - long sp; - - __asm__ __volatile__("andl %%esp,%0" : - "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif +static void call_on_stack(void *func, void *stack) +{ + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=b" (stack) + : "0" (stack), + "D"(func) + : "memory", "cc", "edx", "ecx", "eax"); +} -#ifdef CONFIG_4KSTACKS +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) +{ + union irq_ctx *curctx, *irqctx; + u32 *isp, arg1, arg2; curctx = (union irq_ctx *) current_thread_info(); irqctx = hardirq_ctx[smp_processor_id()]; @@ -111,52 +112,39 @@ unsigned int do_IRQ(struct pt_regs *regs) * handler) we can't do that and just have to keep using the * current stack (which is the irq stack already after all) */ - if (curctx != irqctx) { - int arg1, arg2, bx; - - /* build the stack frame on the IRQ stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - irqctx->tinfo.task = curctx->tinfo.task; - irqctx->tinfo.previous_esp = current_stack_pointer; + if (unlikely(curctx == irqctx)) + return 0; - /* - * Copy the softirq bits in preempt_count so that the - * softirq checks work in the hardirq context. - */ - irqctx->tinfo.preempt_count = - (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | - (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (irq), "1" (desc), "2" (isp), - "D" (desc->handle_irq) - : "memory", "cc", "ecx" - ); - } else -#endif - desc->handle_irq(irq, desc); + /* build the stack frame on the IRQ stack */ + isp = (u32 *) ((char*)irqctx + sizeof(*irqctx)); + irqctx->tinfo.task = curctx->tinfo.task; + irqctx->tinfo.previous_esp = current_stack_pointer; - irq_exit(); - set_irq_regs(old_regs); + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + + if (unlikely(overflow)) + call_on_stack(print_stack_overflow, isp); + + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (isp) + : "0" (irq), "1" (desc), "2" (isp), + "D" (desc->handle_irq) + : "memory", "cc", "ecx"); return 1; } -#ifdef CONFIG_4KSTACKS - -static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - /* * allocate per-cpu stacks for hardirq and for softirq processing */ -void irq_ctx_init(int cpu) +void __cpuinit irq_ctx_init(int cpu) { union irq_ctx *irqctx; @@ -164,25 +152,25 @@ void irq_ctx_init(int cpu) return; irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); hardirq_ctx[cpu] = irqctx; irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = 0; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = 0; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); softirq_ctx[cpu] = irqctx; - printk("CPU %u irqstacks, hard=%p soft=%p\n", - cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); + printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n", + cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); } void irq_ctx_exit(int cpu) @@ -211,25 +199,56 @@ asmlinkage void do_softirq(void) /* build the stack frame on the softirq stack */ isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call __do_softirq \n" - " movl %%ebx,%%esp \n" - : "=b"(isp) - : "0"(isp) - : "memory", "cc", "edx", "ecx", "eax" - ); + call_on_stack(__do_softirq, isp); /* * Shouldnt happen, we returned above if in_interrupt(): - */ + */ WARN_ON_ONCE(softirq_count()); } local_irq_restore(flags); } + +#else +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } #endif /* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +unsigned int do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + /* high bit used in ret_from_ code */ + int overflow, irq = ~regs->orig_ax; + struct irq_desc *desc = irq_desc + irq; + + if (unlikely((unsigned)irq >= NR_IRQS)) { + printk(KERN_EMERG "%s: cannot handle IRQ %d\n", + __func__, irq); + BUG(); + } + + old_regs = set_irq_regs(regs); + irq_enter(); + + overflow = check_stack_overflow(); + + if (!execute_on_irq_stack(overflow, desc, irq)) { + if (unlikely(overflow)) + print_stack_overflow(); + desc->handle_irq(irq, desc); + } + + irq_exit(); + set_irq_regs(old_regs); + return 1; +} + +/* * Interrupt statistics: */ @@ -306,23 +325,27 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_call_count); - seq_printf(p, " function call interrupts\n"); + seq_printf(p, " Function call interrupts\n"); seq_printf(p, "TLB: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +354,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include <mach_apic.h> diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac15466a9..f065fe9071b 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -129,12 +129,13 @@ skip: seq_printf(p, "CAL: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_call_count); - seq_printf(p, " function call interrupts\n"); + seq_printf(p, " Function call interrupts\n"); seq_printf(p, "TLB: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -153,6 +155,32 @@ skip: } /* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + +/* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 00000000000..9200a1e2752 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,163 @@ +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/timer.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/arch_hooks.h> +#include <asm/i8259.h> + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) + /* + * IRQ0 must be given a fixed assignment and initialized, + * because it's used before the IO-APIC is set up. + */ + set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); + + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPI for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for single call function */ + set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +#endif + +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif + + if (!acpi_ioapic) + setup_irq(2, &irq2); + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 00000000000..1f26fd9ec4f --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,222 @@ +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/acpi.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/i8259.h> + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * SMP has a few special interrupts for IPI messages + */ + +#define BUILD_IRQ(nr) \ + asmlinkage void IRQ_NAME(nr); \ + asm("\n.text\n.p2align\n" \ + "IRQ" #nr "_interrupt:\n\t" \ + "push $~(" #nr ") ; " \ + "jmp common_interrupt\n" \ + ".previous"); + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +static void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for generic single function call */ + alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, + call_function_single_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} diff --git a/arch/x86/kernel/k8.c b/arch/x86/kernel/k8.c index 7377ccb2133..304d8bad655 100644 --- a/arch/x86/kernel/k8.c +++ b/arch/x86/kernel/k8.c @@ -16,8 +16,9 @@ EXPORT_SYMBOL(num_k8_northbridges); static u32 *flush_words; struct pci_device_id k8_nb_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, {} }; EXPORT_SYMBOL(k8_nb_ids); diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index c0320599171..ff7d3b0124f 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -12,9 +12,13 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/module.h> #include <asm/setup.h> +struct dentry *arch_debugfs_dir; +EXPORT_SYMBOL(arch_debugfs_dir); + #ifdef CONFIG_DEBUG_BOOT_PARAMS struct setup_data_node { u64 paddr; @@ -135,6 +139,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) if (PageHighMem(pg)) { data = ioremap_cache(pa_data, sizeof(*data)); if (!data) { + kfree(node); error = -ENXIO; goto err_dir; } @@ -209,6 +214,10 @@ static int __init arch_kdebugfs_init(void) { int error = 0; + arch_debugfs_dir = debugfs_create_dir("x86", NULL); + if (!arch_debugfs_dir) + return -ENOMEM; + #ifdef CONFIG_DEBUG_BOOT_PARAMS error = boot_params_kdebugfs_init(); #endif diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index f47f0eb886b..10435a120d2 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -69,6 +69,9 @@ static int gdb_x86vector = -1; */ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = regs->ax; gdb_regs[GDB_BX] = regs->bx; gdb_regs[GDB_CX] = regs->cx; @@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_SI] = regs->si; gdb_regs[GDB_DI] = regs->di; gdb_regs[GDB_BP] = regs->bp; - gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_PC] = regs->ip; #ifdef CONFIG_X86_32 + gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_DS] = regs->ds; gdb_regs[GDB_ES] = regs->es; gdb_regs[GDB_CS] = regs->cs; @@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_R13] = regs->r13; gdb_regs[GDB_R14] = regs->r14; gdb_regs[GDB_R15] = regs->r15; + gdb_regs32[GDB_PS] = regs->flags; + gdb_regs32[GDB_CS] = regs->cs; + gdb_regs32[GDB_SS] = regs->ss; #endif gdb_regs[GDB_SP] = regs->sp; } @@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) */ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = 0; gdb_regs[GDB_BX] = 0; gdb_regs[GDB_CX] = 0; @@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; #else - gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); - gdb_regs[GDB_PC] = 0; + gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); + gdb_regs32[GDB_CS] = __KERNEL_CS; + gdb_regs32[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_PC] = p->thread.ip; gdb_regs[GDB_R8] = 0; gdb_regs[GDB_R9] = 0; gdb_regs[GDB_R10] = 0; @@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) */ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif regs->ax = gdb_regs[GDB_AX]; regs->bx = gdb_regs[GDB_BX]; regs->cx = gdb_regs[GDB_CX]; @@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->si = gdb_regs[GDB_SI]; regs->di = gdb_regs[GDB_DI]; regs->bp = gdb_regs[GDB_BP]; - regs->flags = gdb_regs[GDB_PS]; regs->ip = gdb_regs[GDB_PC]; #ifdef CONFIG_X86_32 + regs->flags = gdb_regs[GDB_PS]; regs->ds = gdb_regs[GDB_DS]; regs->es = gdb_regs[GDB_ES]; regs->cs = gdb_regs[GDB_CS]; @@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->r13 = gdb_regs[GDB_R13]; regs->r14 = gdb_regs[GDB_R14]; regs->r15 = gdb_regs[GDB_R15]; + regs->flags = gdb_regs32[GDB_PS]; + regs->cs = gdb_regs32[GDB_CS]; + regs->ss = gdb_regs32[GDB_SS]; #endif } @@ -378,10 +395,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; kgdb_single_step = 1; - if (kgdb_contthread) { - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } get_debugreg(dr6, 6); @@ -440,12 +455,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) return NOTIFY_DONE; case DIE_NMI_IPI: - if (atomic_read(&kgdb_active) != -1) { - /* KGDB CPU roundup */ - kgdb_nmicallback(raw_smp_processor_id(), regs); - was_in_debug_nmi[raw_smp_processor_id()] = 1; - touch_nmi_watchdog(); - } + /* Just ignore, we will handle the roundup on DIE_NMI. */ return NOTIFY_DONE; case DIE_NMIUNKNOWN: @@ -466,9 +476,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id() && - user_mode(regs)) - return single_step_cont(regs, args); + raw_smp_processor_id()) { + if (user_mode(regs)) + return single_step_cont(regs, args); + break; + } else if (test_thread_flag(TIF_SINGLESTEP)) + /* This means a user thread is single stepping + * a system call which should be ignored + */ + return NOTIFY_DONE; /* fall through */ default: if (user_mode(regs)) diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index b8c6743a13d..6c27679ec6a 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->ip = (unsigned long)p->ainsn.insn; } -/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs) { @@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; INIT_HLIST_HEAD(&empty_rp); - spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); + kretprobe_hash_lock(current, &head, &flags); /* fixup registers */ #ifdef CONFIG_X86_64 regs->cs = __KERNEL_CS; @@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) kretprobe_assert(ri, orig_ret_address, trampoline_address); - spin_unlock_irqrestore(&kretprobe_lock, flags); + kretprobe_hash_unlock(current, &flags); hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { hlist_del(&ri->hlist); @@ -860,7 +858,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs) resume_execution(cur, regs, kcb); regs->flags |= kcb->kprobe_saved_flags; - trace_hardirqs_fixup_flags(regs->flags); if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { kcb->kprobe_status = KPROBE_HIT_SSDONE; diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 8b7a3cf37d2..478bca986ec 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -178,7 +178,7 @@ static void kvm_flush_tlb(void) kvm_deferred_mmu_op(&ftlb, sizeof ftlb); } -static void kvm_release_pt(u32 pfn) +static void kvm_release_pt(unsigned long pfn) { struct kvm_mmu_op_release_pt rpt = { .header.op = KVM_MMU_OP_RELEASE_PT, diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 08a30986d47..d02def06ca9 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -18,6 +18,7 @@ #include <linux/clocksource.h> #include <linux/kvm_para.h> +#include <asm/pvclock.h> #include <asm/arch_hooks.h> #include <asm/msr.h> #include <asm/apic.h> @@ -36,18 +37,9 @@ static int parse_no_kvmclock(char *arg) early_param("no-kvmclock", parse_no_kvmclock); /* The hypervisor will put information about time periodically here */ -static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock); -#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field +static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock); +static struct pvclock_wall_clock wall_clock; -static inline u64 kvm_get_delta(u64 last_tsc) -{ - int cpu = smp_processor_id(); - u64 delta = native_read_tsc() - last_tsc; - return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE; -} - -static struct kvm_wall_clock wall_clock; -static cycle_t kvm_clock_read(void); /* * The wallclock is the time of day when we booted. Since then, some time may * have elapsed since the hypervisor wrote the data. So we try to account for @@ -55,64 +47,37 @@ static cycle_t kvm_clock_read(void); */ static unsigned long kvm_get_wallclock(void) { - u32 wc_sec, wc_nsec; - u64 delta; + struct pvclock_vcpu_time_info *vcpu_time; struct timespec ts; - int version, nsec; int low, high; low = (int)__pa(&wall_clock); high = ((u64)__pa(&wall_clock) >> 32); + native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - delta = kvm_clock_read(); + vcpu_time = &get_cpu_var(hv_clock); + pvclock_read_wallclock(&wall_clock, vcpu_time, &ts); + put_cpu_var(hv_clock); - native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - do { - version = wall_clock.wc_version; - rmb(); - wc_sec = wall_clock.wc_sec; - wc_nsec = wall_clock.wc_nsec; - rmb(); - } while ((wall_clock.wc_version != version) || (version & 1)); - - delta = kvm_clock_read() - delta; - delta += wc_nsec; - nsec = do_div(delta, NSEC_PER_SEC); - set_normalized_timespec(&ts, wc_sec + delta, nsec); - /* - * Of all mechanisms of time adjustment I've tested, this one - * was the champion! - */ - return ts.tv_sec + 1; + return ts.tv_sec; } static int kvm_set_wallclock(unsigned long now) { - return 0; + return -1; } -/* - * This is our read_clock function. The host puts an tsc timestamp each time - * it updates a new time. Without the tsc adjustment, we can have a situation - * in which a vcpu starts to run earlier (smaller system_time), but probes - * time later (compared to another vcpu), leading to backwards time - */ static cycle_t kvm_clock_read(void) { - u64 last_tsc, now; - int cpu; + struct pvclock_vcpu_time_info *src; + cycle_t ret; - preempt_disable(); - cpu = smp_processor_id(); - - last_tsc = get_clock(cpu, tsc_timestamp); - now = get_clock(cpu, system_time); - - now += kvm_get_delta(last_tsc); - preempt_enable(); - - return now; + src = &get_cpu_var(hv_clock); + ret = pvclock_clocksource_read(src); + put_cpu_var(hv_clock); + return ret; } + static struct clocksource kvm_clock = { .name = "kvm-clock", .read = kvm_clock_read, @@ -123,13 +88,14 @@ static struct clocksource kvm_clock = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int kvm_register_clock(void) +static int kvm_register_clock(char *txt) { int cpu = smp_processor_id(); int low, high; low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1; high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32); - + printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n", + cpu, high, low, txt); return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high); } @@ -140,12 +106,20 @@ static void kvm_setup_secondary_clock(void) * Now that the first cpu already had this clocksource initialized, * we shouldn't fail. */ - WARN_ON(kvm_register_clock()); + WARN_ON(kvm_register_clock("secondary cpu clock")); /* ok, done with our trickery, call native */ setup_secondary_APIC_clock(); } #endif +#ifdef CONFIG_SMP +static void __init kvm_smp_prepare_boot_cpu(void) +{ + WARN_ON(kvm_register_clock("primary cpu clock")); + native_smp_prepare_boot_cpu(); +} +#endif + /* * After the clock is registered, the host will keep writing to the * registered memory location. If the guest happens to shutdown, this memory @@ -174,7 +148,7 @@ void __init kvmclock_init(void) return; if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { - if (kvm_register_clock()) + if (kvm_register_clock("boot clock")) return; pv_time_ops.get_wallclock = kvm_get_wallclock; pv_time_ops.set_wallclock = kvm_set_wallclock; @@ -182,6 +156,9 @@ void __init kvmclock_init(void) #ifdef CONFIG_X86_LOCAL_APIC pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock; #endif +#ifdef CONFIG_SMP + smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu; +#endif machine_ops.shutdown = kvm_shutdown; #ifdef CONFIG_KEXEC machine_ops.crash_shutdown = kvm_crash_shutdown; diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c3637c7..eee32b43fee 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -18,11 +18,12 @@ #include <asm/ldt.h> #include <asm/desc.h> #include <asm/mmu_context.h> +#include <asm/syscalls.h> #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -51,6 +52,8 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) memset(newldt + oldsize * LDT_ENTRY_SIZE, 0, (mincount - oldsize) * LDT_ENTRY_SIZE); + paravirt_alloc_ldt(newldt, mincount); + #ifdef CONFIG_X86_64 /* CHECKME: Do we really need this ? */ wmb(); @@ -62,19 +65,18 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) if (reload) { #ifdef CONFIG_SMP - cpumask_t mask; - preempt_disable(); load_LDT(pc); - mask = cpumask_of_cpu(smp_processor_id()); - if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + if (!cpus_equal(current->mm->cpu_vm_mask, + cpumask_of_cpu(smp_processor_id()))) + smp_call_function(flush_ldt, current->mm, 1); preempt_enable(); #else load_LDT(pc); #endif } if (oldsize) { + paravirt_free_ldt(oldldt, oldsize); if (oldsize * LDT_ENTRY_SIZE > PAGE_SIZE) vfree(oldldt); else @@ -86,10 +88,13 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) static inline int copy_ldt(mm_context_t *new, mm_context_t *old) { int err = alloc_ldt(new, old->size, 0); + int i; if (err < 0) return err; - memcpy(new->ldt, old->ldt, old->size * LDT_ENTRY_SIZE); + + for(i = 0; i < old->size; i++) + write_ldt_entry(new->ldt, i, old->ldt + i * LDT_ENTRY_SIZE); return 0; } @@ -126,6 +131,7 @@ void destroy_context(struct mm_struct *mm) if (mm == current->active_mm) clear_LDT(); #endif + paravirt_free_ldt(mm->context.ldt, mm->context.size); if (mm->context.size * LDT_ENTRY_SIZE > PAGE_SIZE) vfree(mm->context.ldt); else diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index d0b234c9fc3..0732adba05c 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -11,6 +11,9 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/numa.h> +#include <linux/ftrace.h> +#include <linux/suspend.h> + #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> @@ -20,6 +23,7 @@ #include <asm/cpufeature.h> #include <asm/desc.h> #include <asm/system.h> +#include <asm/cacheflush.h> #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) static u32 kexec_pgd[1024] PAGE_ALIGNED; @@ -39,7 +43,7 @@ static void set_idt(void *newidt, __u16 limit) curidt.address = (unsigned long)newidt; load_idt(&curidt); -}; +} static void set_gdt(void *newgdt, __u16 limit) @@ -51,7 +55,7 @@ static void set_gdt(void *newgdt, __u16 limit) curgdt.address = (unsigned long)newgdt; load_gdt(&curgdt); -}; +} static void load_segments(void) { @@ -75,7 +79,7 @@ static void load_segments(void) /* * A architecture hook called to validate the * proposed image and prepare the control pages - * as needed. The pages for KEXEC_CONTROL_CODE_SIZE + * as needed. The pages for KEXEC_CONTROL_PAGE_SIZE * have been allocated, but the segments have yet * been copied into the kernel. * @@ -83,10 +87,12 @@ static void load_segments(void) * reboot code buffer to allow us to avoid allocations * later. * - * Currently nothing. + * Make control page executable. */ int machine_kexec_prepare(struct kimage *image) { + if (nx_enabled) + set_pages_x(image->control_code_page, 1); return 0; } @@ -96,25 +102,54 @@ int machine_kexec_prepare(struct kimage *image) */ void machine_kexec_cleanup(struct kimage *image) { + if (nx_enabled) + set_pages_nx(image->control_code_page, 1); } /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + int save_ftrace_enabled; + asmlinkage unsigned long + (*relocate_kernel_ptr)(unsigned long indirection_page, + unsigned long control_page, + unsigned long start_address, + unsigned int has_pae, + unsigned int preserve_context); + +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + save_processor_state(); +#endif + + save_ftrace_enabled = __ftrace_enabled_save(); /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); + if (image->preserve_context) { +#ifdef CONFIG_X86_IO_APIC + /* We need to put APICs in legacy mode so that we can + * get timer interrupts in second kernel. kexec/kdump + * paths already have calls to disable_IO_APIC() in + * one form or other. kexec jump path also need + * one. + */ + disable_IO_APIC(); +#endif + } + control_page = page_address(image->control_code_page); - memcpy(control_page, relocate_kernel, PAGE_SIZE); + memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE); + relocate_kernel_ptr = control_page; page_list[PA_CONTROL_PAGE] = __pa(control_page); - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[VA_CONTROL_PAGE] = (unsigned long)control_page; page_list[PA_PGD] = __pa(kexec_pgd); page_list[VA_PGD] = (unsigned long)kexec_pgd; #ifdef CONFIG_X86_PAE @@ -127,6 +162,7 @@ NORET_TYPE void machine_kexec(struct kimage *image) page_list[VA_PTE_0] = (unsigned long)kexec_pte0; page_list[PA_PTE_1] = __pa(kexec_pte1); page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT); /* The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -145,8 +181,17 @@ NORET_TYPE void machine_kexec(struct kimage *image) set_idt(phys_to_virt(0),0); /* now call it */ - relocate_kernel((unsigned long)image->head, (unsigned long)page_list, - image->start, cpu_has_pae); + image->start = relocate_kernel_ptr((unsigned long)image->head, + (unsigned long)page_list, + image->start, cpu_has_pae, + image->preserve_context); + +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + restore_processor_state(); +#endif + + __ftrace_enabled_restore(save_ftrace_enabled); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 576a03db451..c43caa3a91f 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -11,6 +11,8 @@ #include <linux/string.h> #include <linux/reboot.h> #include <linux/numa.h> +#include <linux/ftrace.h> + #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/mmu_context.h> @@ -110,7 +112,7 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable) { pgd_t *level4p; level4p = (pgd_t *)__va(start_pgtable); - return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT); + return init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT); } static void set_idt(void *newidt, u16 limit) @@ -179,11 +181,13 @@ void machine_kexec_cleanup(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + tracer_disable(); + /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 07c0f828f48..3b599518c32 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -33,6 +33,8 @@ #include <linux/module.h> #include <asm/geode.h> +#define MFGPT_DEFAULT_IRQ 7 + static struct mfgpt_timer_t { unsigned int avail:1; } mfgpt_timers[MFGPT_MAX_TIMERS]; @@ -157,29 +159,48 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) } EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event); -int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) +int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable) { - u32 val, dummy; - int offset; + u32 zsel, lpc, dummy; + int shift; if (timer < 0 || timer >= MFGPT_MAX_TIMERS) return -EIO; - if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) + /* + * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA + * is using the same CMP of the timer's Siamese twin, the IRQ is set to + * 2, and we mustn't use nor change it. + * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the + * IRQ of the 1st. This can only happen if forcing an IRQ, calling this + * with *irq==0 is safe. Currently there _are_ no 2 drivers. + */ + rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy); + shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4; + if (((zsel >> shift) & 0xF) == 2) return -EIO; - rdmsr(MSR_PIC_ZSEL_LOW, val, dummy); + /* Choose IRQ: if none supplied, keep IRQ already set or use default */ + if (!*irq) + *irq = (zsel >> shift) & 0xF; + if (!*irq) + *irq = MFGPT_DEFAULT_IRQ; - offset = (timer % 4) * 4; - - val &= ~((0xF << offset) | (0xF << (offset + 16))); + /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */ + if (*irq < 1 || *irq == 2 || *irq > 15) + return -EIO; + rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy); + if (lpc & (1 << *irq)) + return -EIO; + /* All chosen and checked - go for it */ + if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) + return -EIO; if (enable) { - val |= (irq & 0x0F) << (offset); - val |= (irq & 0x0F) << (offset + 16); + zsel = (zsel & ~(0xF << shift)) | (*irq << shift); + wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy); } - wrmsr(MSR_PIC_ZSEL_LOW, val, dummy); return 0; } @@ -242,7 +263,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer); static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; static u16 mfgpt_event_clock; -static int irq = 7; +static int irq; static int __init mfgpt_setup(char *str) { get_option(&str, &irq); @@ -346,7 +367,7 @@ int __init mfgpt_timer_setup(void) mfgpt_event_clock = timer; /* Set up the IRQ on the MFGPT side */ - if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { + if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) { printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); return -EIO; } @@ -374,13 +395,14 @@ int __init mfgpt_timer_setup(void) &mfgpt_clockevent); printk(KERN_INFO - "mfgpt-timer: registering the MFGPT timer as a clock event.\n"); + "mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n", + timer, irq); clockevents_register_device(&mfgpt_clockevent); return 0; err: - geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); + geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq); printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n"); return -EIO; diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c deleted file mode 100644 index 69729e38b78..00000000000 --- a/arch/x86/kernel/microcode.c +++ /dev/null @@ -1,848 +0,0 @@ -/* - * Intel CPU Microcode Update Driver for Linux - * - * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> - * 2006 Shaohua Li <shaohua.li@intel.com> - * - * This driver allows to upgrade microcode on Intel processors - * belonging to IA-32 family - PentiumPro, Pentium II, - * Pentium III, Xeon, Pentium 4, etc. - * - * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, - * Order Number 245472 or free download from: - * - * http://developer.intel.com/design/pentium4/manuals/245472.htm - * - * For more information, go to http://www.urbanmyth.org/microcode - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Initial release. - * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Added read() support + cleanups. - * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Added 'device trimming' support. open(O_WRONLY) zeroes - * and frees the saved copy of applied microcode. - * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Made to use devfs (/dev/cpu/microcode) + cleanups. - * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> - * Added misc device support (now uses both devfs and misc). - * Added MICROCODE_IOCFREE ioctl to clear memory. - * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> - * Messages for error cases (non Intel & no suitable microcode). - * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> - * Removed ->release(). Removed exclusive open and status bitmap. - * Added microcode_rwsem to serialize read()/write()/ioctl(). - * Removed global kernel lock usage. - * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> - * Write 0 to 0x8B msr and then cpuid before reading revision, - * so that it works even if there were no update done by the - * BIOS. Otherwise, reading from 0x8B gives junk (which happened - * to be 0 on my machine which is why it worked even when I - * disabled update by the BIOS) - * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. - * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and - * Tigran Aivazian <tigran@veritas.com> - * Intel Pentium 4 processor support and bugfixes. - * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> - * Bugfix for HT (Hyper-Threading) enabled processors - * whereby processor resources are shared by all logical processors - * in a single CPU package. - * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and - * Tigran Aivazian <tigran@veritas.com>, - * Serialize updates as required on HT processors due to speculative - * nature of implementation. - * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> - * Fix the panic when writing zero-length microcode chunk. - * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, - * Jun Nakajima <jun.nakajima@intel.com> - * Support for the microcode updates in the new format. - * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> - * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl - * because we no longer hold a copy of applied microcode - * in kernel memory. - * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> - * Fix sigmatch() macro to handle old CPUs with pf == 0. - * Thanks to Stuart Swales for pointing out this bug. - */ - -//#define DEBUG /* pr_debug */ -#include <linux/capability.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/cpumask.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/miscdevice.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/mutex.h> -#include <linux/cpu.h> -#include <linux/firmware.h> -#include <linux/platform_device.h> - -#include <asm/msr.h> -#include <asm/uaccess.h> -#include <asm/processor.h> - -MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver"); -MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); -MODULE_LICENSE("GPL"); - -#define MICROCODE_VERSION "1.14a" - -#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */ -#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */ -#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */ -#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */ -#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */ -#define DWSIZE (sizeof (u32)) -#define get_totalsize(mc) \ - (((microcode_t *)mc)->hdr.totalsize ? \ - ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE) -#define get_datasize(mc) \ - (((microcode_t *)mc)->hdr.datasize ? \ - ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) - -#define sigmatch(s1, s2, p1, p2) \ - (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) - -#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) - -/* serialize access to the physical write to MSR 0x79 */ -static DEFINE_SPINLOCK(microcode_update_lock); - -/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ -static DEFINE_MUTEX(microcode_mutex); - -static struct ucode_cpu_info { - int valid; - unsigned int sig; - unsigned int pf; - unsigned int rev; - microcode_t *mc; -} ucode_cpu_info[NR_CPUS]; - -static void collect_cpu_info(int cpu_num) -{ - struct cpuinfo_x86 *c = &cpu_data(cpu_num); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - unsigned int val[2]; - - /* We should bind the task to the CPU */ - BUG_ON(raw_smp_processor_id() != cpu_num); - uci->pf = uci->rev = 0; - uci->mc = NULL; - uci->valid = 1; - - if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || - cpu_has(c, X86_FEATURE_IA64)) { - printk(KERN_ERR "microcode: CPU%d not a capable Intel " - "processor\n", cpu_num); - uci->valid = 0; - return; - } - - uci->sig = cpuid_eax(0x00000001); - - if ((c->x86_model >= 5) || (c->x86 > 6)) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - uci->pf = 1 << ((val[1] >> 18) & 7); - } - - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev); - pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", - uci->sig, uci->pf, uci->rev); -} - -static inline int microcode_update_match(int cpu_num, - microcode_header_t *mc_header, int sig, int pf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - if (!sigmatch(sig, uci->sig, pf, uci->pf) - || mc_header->rev <= uci->rev) - return 0; - return 1; -} - -static int microcode_sanity_check(void *mc) -{ - microcode_header_t *mc_header = mc; - struct extended_sigtable *ext_header = NULL; - struct extended_signature *ext_sig; - unsigned long total_size, data_size, ext_table_size; - int sum, orig_sum, ext_sigcount = 0, i; - - total_size = get_totalsize(mc_header); - data_size = get_datasize(mc_header); - if (data_size + MC_HEADER_SIZE > total_size) { - printk(KERN_ERR "microcode: error! " - "Bad data size in microcode data file\n"); - return -EINVAL; - } - - if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { - printk(KERN_ERR "microcode: error! " - "Unknown microcode update format\n"); - return -EINVAL; - } - ext_table_size = total_size - (MC_HEADER_SIZE + data_size); - if (ext_table_size) { - if ((ext_table_size < EXT_HEADER_SIZE) - || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! " - "Small exttable size in microcode data file\n"); - return -EINVAL; - } - ext_header = mc + MC_HEADER_SIZE + data_size; - if (ext_table_size != exttable_size(ext_header)) { - printk(KERN_ERR "microcode: error! " - "Bad exttable size in microcode data file\n"); - return -EFAULT; - } - ext_sigcount = ext_header->count; - } - - /* check extended table checksum */ - if (ext_table_size) { - int ext_table_sum = 0; - int *ext_tablep = (int *)ext_header; - - i = ext_table_size / DWSIZE; - while (i--) - ext_table_sum += ext_tablep[i]; - if (ext_table_sum) { - printk(KERN_WARNING "microcode: aborting, " - "bad extended signature table checksum\n"); - return -EINVAL; - } - } - - /* calculate the checksum */ - orig_sum = 0; - i = (MC_HEADER_SIZE + data_size) / DWSIZE; - while (i--) - orig_sum += ((int *)mc)[i]; - if (orig_sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); - return -EINVAL; - } - if (!ext_table_size) - return 0; - /* check extended signature checksum */ - for (i = 0; i < ext_sigcount; i++) { - ext_sig = (void *)ext_header + EXT_HEADER_SIZE + - EXT_SIGNATURE_SIZE * i; - sum = orig_sum - - (mc_header->sig + mc_header->pf + mc_header->cksum) - + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); - if (sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); - return -EINVAL; - } - } - return 0; -} - -/* - * return 0 - no update found - * return 1 - found update - * return < 0 - error - */ -static int get_maching_microcode(void *mc, int cpu) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - microcode_header_t *mc_header = mc; - struct extended_sigtable *ext_header; - unsigned long total_size = get_totalsize(mc_header); - int ext_sigcount, i; - struct extended_signature *ext_sig; - void *new_mc; - - if (microcode_update_match(cpu, mc_header, - mc_header->sig, mc_header->pf)) - goto find; - - if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) - return 0; - - ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE; - ext_sigcount = ext_header->count; - ext_sig = (void *)ext_header + EXT_HEADER_SIZE; - for (i = 0; i < ext_sigcount; i++) { - if (microcode_update_match(cpu, mc_header, - ext_sig->sig, ext_sig->pf)) - goto find; - ext_sig++; - } - return 0; -find: - pr_debug("microcode: CPU%d found a matching microcode update with" - " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev); - new_mc = vmalloc(total_size); - if (!new_mc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - return -ENOMEM; - } - - /* free previous update file */ - vfree(uci->mc); - - memcpy(new_mc, mc, total_size); - uci->mc = new_mc; - return 1; -} - -static void apply_microcode(int cpu) -{ - unsigned long flags; - unsigned int val[2]; - int cpu_num = raw_smp_processor_id(); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - /* We should bind the task to the CPU */ - BUG_ON(cpu_num != cpu); - - if (uci->mc == NULL) - return; - - /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); - - /* write microcode via MSR 0x79 */ - wrmsr(MSR_IA32_UCODE_WRITE, - (unsigned long) uci->mc->bits, - (unsigned long) uci->mc->bits >> 16 >> 16); - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - - spin_unlock_irqrestore(µcode_update_lock, flags); - if (val[1] != uci->mc->hdr.rev) { - printk(KERN_ERR "microcode: CPU%d update from revision " - "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]); - return; - } - printk(KERN_INFO "microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %08x \n", - cpu_num, uci->rev, val[1], uci->mc->hdr.date); - uci->rev = val[1]; -} - -#ifdef CONFIG_MICROCODE_OLD_INTERFACE -static void __user *user_buffer; /* user area microcode data buffer */ -static unsigned int user_buffer_size; /* it's size */ - -static long get_next_ucode(void **mc, long offset) -{ - microcode_header_t mc_header; - unsigned long total_size; - - /* No more data */ - if (offset >= user_buffer_size) - return 0; - if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - return -EFAULT; - } - total_size = get_totalsize(&mc_header); - if (offset + total_size > user_buffer_size) { - printk(KERN_ERR "microcode: error! Bad total size in microcode " - "data file\n"); - return -EINVAL; - } - *mc = vmalloc(total_size); - if (!*mc) - return -ENOMEM; - if (copy_from_user(*mc, user_buffer + offset, total_size)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - vfree(*mc); - return -EFAULT; - } - return offset + total_size; -} - -static int do_microcode_update (void) -{ - long cursor = 0; - int error = 0; - void *new_mc = NULL; - int cpu; - cpumask_t old; - - old = current->cpus_allowed; - - while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) { - error = microcode_sanity_check(new_mc); - if (error) - goto out; - /* - * It's possible the data file has multiple matching ucode, - * lets keep searching till the latest version - */ - for_each_online_cpu(cpu) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - if (!uci->valid) - continue; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - error = get_maching_microcode(new_mc, cpu); - if (error < 0) - goto out; - if (error == 1) - apply_microcode(cpu); - } - vfree(new_mc); - } -out: - if (cursor > 0) - vfree(new_mc); - if (cursor < 0) - error = cursor; - set_cpus_allowed_ptr(current, &old); - return error; -} - -static int microcode_open (struct inode *unused1, struct file *unused2) -{ - return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; -} - -static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos) -{ - ssize_t ret; - - if ((len >> PAGE_SHIFT) > num_physpages) { - printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages); - return -EINVAL; - } - - get_online_cpus(); - mutex_lock(µcode_mutex); - - user_buffer = (void __user *) buf; - user_buffer_size = (int) len; - - ret = do_microcode_update(); - if (!ret) - ret = (ssize_t)len; - - mutex_unlock(µcode_mutex); - put_online_cpus(); - - return ret; -} - -static const struct file_operations microcode_fops = { - .owner = THIS_MODULE, - .write = microcode_write, - .open = microcode_open, -}; - -static struct miscdevice microcode_dev = { - .minor = MICROCODE_MINOR, - .name = "microcode", - .fops = µcode_fops, -}; - -static int __init microcode_dev_init (void) -{ - int error; - - error = misc_register(µcode_dev); - if (error) { - printk(KERN_ERR - "microcode: can't misc_register on minor=%d\n", - MICROCODE_MINOR); - return error; - } - - return 0; -} - -static void microcode_dev_exit (void) -{ - misc_deregister(µcode_dev); -} - -MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); -#else -#define microcode_dev_init() 0 -#define microcode_dev_exit() do { } while(0) -#endif - -static long get_next_ucode_from_buffer(void **mc, void *buf, - unsigned long size, long offset) -{ - microcode_header_t *mc_header; - unsigned long total_size; - - /* No more data */ - if (offset >= size) - return 0; - mc_header = (microcode_header_t *)(buf + offset); - total_size = get_totalsize(mc_header); - - if (offset + total_size > size) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - return -EINVAL; - } - - *mc = vmalloc(total_size); - if (!*mc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - return -ENOMEM; - } - memcpy(*mc, buf + offset, total_size); - return offset + total_size; -} - -/* fake device for request_firmware */ -static struct platform_device *microcode_pdev; - -static int cpu_request_microcode(int cpu) -{ - char name[30]; - struct cpuinfo_x86 *c = &cpu_data(cpu); - const struct firmware *firmware; - void *buf; - unsigned long size; - long offset = 0; - int error; - void *mc; - - /* We should bind the task to the CPU */ - BUG_ON(cpu != raw_smp_processor_id()); - sprintf(name,"intel-ucode/%02x-%02x-%02x", - c->x86, c->x86_model, c->x86_mask); - error = request_firmware(&firmware, name, µcode_pdev->dev); - if (error) { - pr_debug("microcode: ucode data file %s load failed\n", name); - return error; - } - buf = firmware->data; - size = firmware->size; - while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset)) - > 0) { - error = microcode_sanity_check(mc); - if (error) - break; - error = get_maching_microcode(mc, cpu); - if (error < 0) - break; - /* - * It's possible the data file has multiple matching ucode, - * lets keep searching till the latest version - */ - if (error == 1) { - apply_microcode(cpu); - error = 0; - } - vfree(mc); - } - if (offset > 0) - vfree(mc); - if (offset < 0) - error = offset; - release_firmware(firmware); - - return error; -} - -static int apply_microcode_check_cpu(int cpu) -{ - struct cpuinfo_x86 *c = &cpu_data(cpu); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - cpumask_t old; - unsigned int val[2]; - int err = 0; - - /* Check if the microcode is available */ - if (!uci->mc) - return 0; - - old = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - - /* Check if the microcode we have in memory matches the CPU */ - if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || - cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001)) - err = -EINVAL; - - if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - if (uci->pf != (1 << ((val[1] >> 18) & 7))) - err = -EINVAL; - } - - if (!err) { - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - if (uci->rev != val[1]) - err = -EINVAL; - } - - if (!err) - apply_microcode(cpu); - else - printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:" - " sig=0x%x, pf=0x%x, rev=0x%x\n", - cpu, uci->sig, uci->pf, uci->rev); - - set_cpus_allowed_ptr(current, &old); - return err; -} - -static void microcode_init_cpu(int cpu, int resume) -{ - cpumask_t old; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - old = current->cpus_allowed; - - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - mutex_lock(µcode_mutex); - collect_cpu_info(cpu); - if (uci->valid && system_state == SYSTEM_RUNNING && !resume) - cpu_request_microcode(cpu); - mutex_unlock(µcode_mutex); - set_cpus_allowed_ptr(current, &old); -} - -static void microcode_fini_cpu(int cpu) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - mutex_lock(µcode_mutex); - uci->valid = 0; - vfree(uci->mc); - uci->mc = NULL; - mutex_unlock(µcode_mutex); -} - -static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - char *end; - unsigned long val = simple_strtoul(buf, &end, 0); - int err = 0; - int cpu = dev->id; - - if (end == buf) - return -EINVAL; - if (val == 1) { - cpumask_t old; - - old = current->cpus_allowed; - - get_online_cpus(); - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - - mutex_lock(µcode_mutex); - if (uci->valid) - err = cpu_request_microcode(cpu); - mutex_unlock(µcode_mutex); - put_online_cpus(); - set_cpus_allowed_ptr(current, &old); - } - if (err) - return err; - return sz; -} - -static ssize_t version_show(struct sys_device *dev, char *buf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - - return sprintf(buf, "0x%x\n", uci->rev); -} - -static ssize_t pf_show(struct sys_device *dev, char *buf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - - return sprintf(buf, "0x%x\n", uci->pf); -} - -static SYSDEV_ATTR(reload, 0200, NULL, reload_store); -static SYSDEV_ATTR(version, 0400, version_show, NULL); -static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); - -static struct attribute *mc_default_attrs[] = { - &attr_reload.attr, - &attr_version.attr, - &attr_processor_flags.attr, - NULL -}; - -static struct attribute_group mc_attr_group = { - .attrs = mc_default_attrs, - .name = "microcode", -}; - -static int __mc_sysdev_add(struct sys_device *sys_dev, int resume) -{ - int err, cpu = sys_dev->id; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - if (!cpu_online(cpu)) - return 0; - - pr_debug("microcode: CPU%d added\n", cpu); - memset(uci, 0, sizeof(*uci)); - - err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); - if (err) - return err; - - microcode_init_cpu(cpu, resume); - - return 0; -} - -static int mc_sysdev_add(struct sys_device *sys_dev) -{ - return __mc_sysdev_add(sys_dev, 0); -} - -static int mc_sysdev_remove(struct sys_device *sys_dev) -{ - int cpu = sys_dev->id; - - if (!cpu_online(cpu)) - return 0; - - pr_debug("microcode: CPU%d removed\n", cpu); - microcode_fini_cpu(cpu); - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - return 0; -} - -static int mc_sysdev_resume(struct sys_device *dev) -{ - int cpu = dev->id; - - if (!cpu_online(cpu)) - return 0; - pr_debug("microcode: CPU%d resumed\n", cpu); - /* only CPU 0 will apply ucode here */ - apply_microcode(0); - return 0; -} - -static struct sysdev_driver mc_sysdev_driver = { - .add = mc_sysdev_add, - .remove = mc_sysdev_remove, - .resume = mc_sysdev_resume, -}; - -static __cpuinit int -mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; - - sys_dev = get_cpu_sysdev(cpu); - switch (action) { - case CPU_UP_CANCELED_FROZEN: - /* The CPU refused to come up during a system resume */ - microcode_fini_cpu(cpu); - break; - case CPU_ONLINE: - case CPU_DOWN_FAILED: - mc_sysdev_add(sys_dev); - break; - case CPU_ONLINE_FROZEN: - /* System-wide resume is in progress, try to apply microcode */ - if (apply_microcode_check_cpu(cpu)) { - /* The application of microcode failed */ - microcode_fini_cpu(cpu); - __mc_sysdev_add(sys_dev, 1); - break; - } - case CPU_DOWN_FAILED_FROZEN: - if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) - printk(KERN_ERR "microcode: Failed to create the sysfs " - "group for CPU%d\n", cpu); - break; - case CPU_DOWN_PREPARE: - mc_sysdev_remove(sys_dev); - break; - case CPU_DOWN_PREPARE_FROZEN: - /* Suspend is in progress, only remove the interface */ - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block __refdata mc_cpu_notifier = { - .notifier_call = mc_cpu_callback, -}; - -static int __init microcode_init (void) -{ - int error; - - error = microcode_dev_init(); - if (error) - return error; - microcode_pdev = platform_device_register_simple("microcode", -1, - NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); - return PTR_ERR(microcode_pdev); - } - - get_online_cpus(); - error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); - put_online_cpus(); - if (error) { - microcode_dev_exit(); - platform_device_unregister(microcode_pdev); - return error; - } - - register_hotcpu_notifier(&mc_cpu_notifier); - - printk(KERN_INFO - "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); - return 0; -} - -static void __exit microcode_exit (void) -{ - microcode_dev_exit(); - - unregister_hotcpu_notifier(&mc_cpu_notifier); - - get_online_cpus(); - sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); - put_online_cpus(); - - platform_device_unregister(microcode_pdev); -} - -module_init(microcode_init) -module_exit(microcode_exit) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c new file mode 100644 index 00000000000..7a1f8eeac2c --- /dev/null +++ b/arch/x86/kernel/microcode_amd.c @@ -0,0 +1,435 @@ +/* + * AMD CPU Microcode Update Driver for Linux + * Copyright (C) 2008 Advanced Micro Devices Inc. + * + * Author: Peter Oruba <peter.oruba@amd.com> + * + * Based on work by: + * Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * + * This driver allows to upgrade microcode on AMD + * family 0x10 and 0x11 processors. + * + * Licensed unter the terms of the GNU General Public + * License version 2. See file COPYING for details. +*/ + +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("AMD Microcode Update Driver"); +MODULE_AUTHOR("Peter Oruba <peter.oruba@amd.com>"); +MODULE_LICENSE("GPL v2"); + +#define UCODE_MAGIC 0x00414d44 +#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000 +#define UCODE_UCODE_TYPE 0x00000001 + +struct equiv_cpu_entry { + unsigned int installed_cpu; + unsigned int fixed_errata_mask; + unsigned int fixed_errata_compare; + unsigned int equiv_cpu; +}; + +struct microcode_header_amd { + unsigned int data_code; + unsigned int patch_id; + unsigned char mc_patch_data_id[2]; + unsigned char mc_patch_data_len; + unsigned char init_flag; + unsigned int mc_patch_data_checksum; + unsigned int nb_dev_id; + unsigned int sb_dev_id; + unsigned char processor_rev_id[2]; + unsigned char nb_rev_id; + unsigned char sb_rev_id; + unsigned char bios_api_rev; + unsigned char reserved1[3]; + unsigned int match_reg[8]; +}; + +struct microcode_amd { + struct microcode_header_amd hdr; + unsigned int mpb[0]; +}; + +#define UCODE_MAX_SIZE (2048) +#define DEFAULT_UCODE_DATASIZE (896) +#define MC_HEADER_SIZE (sizeof(struct microcode_header_amd)) +#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) +#define DWSIZE (sizeof(u32)) +/* For now we support a fixed ucode total size only */ +#define get_totalsize(mc) \ + ((((struct microcode_amd *)mc)->hdr.mc_patch_data_len * 28) \ + + MC_HEADER_SIZE) + +/* serialize access to the physical write */ +static DEFINE_SPINLOCK(microcode_update_lock); + +static struct equiv_cpu_entry *equiv_cpu_table; + +static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + + memset(csig, 0, sizeof(*csig)); + + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + printk(KERN_ERR "microcode: CPU%d not a capable AMD processor\n", + cpu); + return -1; + } + + asm volatile("movl %1, %%ecx; rdmsr" + : "=a" (csig->rev) + : "i" (0x0000008B) : "ecx"); + + printk(KERN_INFO "microcode: collect_cpu_info_amd : patch_id=0x%x\n", + csig->rev); + + return 0; +} + +static int get_matching_microcode(int cpu, void *mc, int rev) +{ + struct microcode_header_amd *mc_header = mc; + struct pci_dev *nb_pci_dev, *sb_pci_dev; + unsigned int current_cpu_id; + unsigned int equiv_cpu_id = 0x00; + unsigned int i = 0; + + BUG_ON(equiv_cpu_table == NULL); + current_cpu_id = cpuid_eax(0x00000001); + + while (equiv_cpu_table[i].installed_cpu != 0) { + if (current_cpu_id == equiv_cpu_table[i].installed_cpu) { + equiv_cpu_id = equiv_cpu_table[i].equiv_cpu; + break; + } + i++; + } + + if (!equiv_cpu_id) { + printk(KERN_ERR "microcode: CPU%d cpu_id " + "not found in equivalent cpu table \n", cpu); + return 0; + } + + if ((mc_header->processor_rev_id[0]) != (equiv_cpu_id & 0xff)) { + printk(KERN_ERR + "microcode: CPU%d patch does not match " + "(patch is %x, cpu extended is %x) \n", + cpu, mc_header->processor_rev_id[0], + (equiv_cpu_id & 0xff)); + return 0; + } + + if ((mc_header->processor_rev_id[1]) != ((equiv_cpu_id >> 16) & 0xff)) { + printk(KERN_ERR "microcode: CPU%d patch does not match " + "(patch is %x, cpu base id is %x) \n", + cpu, mc_header->processor_rev_id[1], + ((equiv_cpu_id >> 16) & 0xff)); + + return 0; + } + + /* ucode may be northbridge specific */ + if (mc_header->nb_dev_id) { + nb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD, + (mc_header->nb_dev_id & 0xff), + NULL); + if ((!nb_pci_dev) || + (mc_header->nb_rev_id != nb_pci_dev->revision)) { + printk(KERN_ERR "microcode: CPU%d NB mismatch \n", cpu); + pci_dev_put(nb_pci_dev); + return 0; + } + pci_dev_put(nb_pci_dev); + } + + /* ucode may be southbridge specific */ + if (mc_header->sb_dev_id) { + sb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD, + (mc_header->sb_dev_id & 0xff), + NULL); + if ((!sb_pci_dev) || + (mc_header->sb_rev_id != sb_pci_dev->revision)) { + printk(KERN_ERR "microcode: CPU%d SB mismatch \n", cpu); + pci_dev_put(sb_pci_dev); + return 0; + } + pci_dev_put(sb_pci_dev); + } + + if (mc_header->patch_id <= rev) + return 0; + + return 1; +} + +static void apply_microcode_amd(int cpu) +{ + unsigned long flags; + unsigned int eax, edx; + unsigned int rev; + int cpu_num = raw_smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; + struct microcode_amd *mc_amd = uci->mc; + unsigned long addr; + + /* We should bind the task to the CPU */ + BUG_ON(cpu_num != cpu); + + if (mc_amd == NULL) + return; + + spin_lock_irqsave(µcode_update_lock, flags); + + addr = (unsigned long)&mc_amd->hdr.data_code; + edx = (unsigned int)(((unsigned long)upper_32_bits(addr))); + eax = (unsigned int)(((unsigned long)lower_32_bits(addr))); + + asm volatile("movl %0, %%ecx; wrmsr" : + : "i" (0xc0010020), "a" (eax), "d" (edx) : "ecx"); + + /* get patch id after patching */ + asm volatile("movl %1, %%ecx; rdmsr" + : "=a" (rev) + : "i" (0x0000008B) : "ecx"); + + spin_unlock_irqrestore(µcode_update_lock, flags); + + /* check current patch id and patch's id for match */ + if (rev != mc_amd->hdr.patch_id) { + printk(KERN_ERR "microcode: CPU%d update from revision " + "0x%x to 0x%x failed\n", cpu_num, + mc_amd->hdr.patch_id, rev); + return; + } + + printk(KERN_INFO "microcode: CPU%d updated from revision " + "0x%x to 0x%x \n", + cpu_num, uci->cpu_sig.rev, mc_amd->hdr.patch_id); + + uci->cpu_sig.rev = rev; +} + +static void * get_next_ucode(u8 *buf, unsigned int size, + int (*get_ucode_data)(void *, const void *, size_t), + unsigned int *mc_size) +{ + unsigned int total_size; +#define UCODE_CONTAINER_SECTION_HDR 8 + u8 section_hdr[UCODE_CONTAINER_SECTION_HDR]; + void *mc; + + if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR)) + return NULL; + + if (section_hdr[0] != UCODE_UCODE_TYPE) { + printk(KERN_ERR "microcode: error! " + "Wrong microcode payload type field\n"); + return NULL; + } + + total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8)); + + printk(KERN_INFO "microcode: size %u, total_size %u\n", + size, total_size); + + if (total_size > size || total_size > UCODE_MAX_SIZE) { + printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); + return NULL; + } + + mc = vmalloc(UCODE_MAX_SIZE); + if (mc) { + memset(mc, 0, UCODE_MAX_SIZE); + if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size)) { + vfree(mc); + mc = NULL; + } else + *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; + } +#undef UCODE_CONTAINER_SECTION_HDR + return mc; +} + + +static int install_equiv_cpu_table(u8 *buf, + int (*get_ucode_data)(void *, const void *, size_t)) +{ +#define UCODE_CONTAINER_HEADER_SIZE 12 + u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE]; + unsigned int *buf_pos = (unsigned int *)container_hdr; + unsigned long size; + + if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE)) + return 0; + + size = buf_pos[2]; + + if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { + printk(KERN_ERR "microcode: error! " + "Wrong microcode equivalnet cpu table\n"); + return 0; + } + + equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size); + if (!equiv_cpu_table) { + printk(KERN_ERR "microcode: error, can't allocate memory for equiv CPU table\n"); + return 0; + } + + buf += UCODE_CONTAINER_HEADER_SIZE; + if (get_ucode_data(equiv_cpu_table, buf, size)) { + vfree(equiv_cpu_table); + return 0; + } + + return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */ +#undef UCODE_CONTAINER_HEADER_SIZE +} + +static void free_equiv_cpu_table(void) +{ + if (equiv_cpu_table) { + vfree(equiv_cpu_table); + equiv_cpu_table = NULL; + } +} + +static int generic_load_microcode(int cpu, void *data, size_t size, + int (*get_ucode_data)(void *, const void *, size_t)) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + u8 *ucode_ptr = data, *new_mc = NULL, *mc; + int new_rev = uci->cpu_sig.rev; + unsigned int leftover; + unsigned long offset; + + offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data); + if (!offset) { + printk(KERN_ERR "microcode: installing equivalent cpu table failed\n"); + return -EINVAL; + } + + ucode_ptr += offset; + leftover = size - offset; + + while (leftover) { + unsigned int uninitialized_var(mc_size); + struct microcode_header_amd *mc_header; + + mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size); + if (!mc) + break; + + mc_header = (struct microcode_header_amd *)mc; + if (get_matching_microcode(cpu, mc, new_rev)) { + if (new_mc) + vfree(new_mc); + new_rev = mc_header->patch_id; + new_mc = mc; + } else + vfree(mc); + + ucode_ptr += mc_size; + leftover -= mc_size; + } + + if (new_mc) { + if (!leftover) { + if (uci->mc) + vfree(uci->mc); + uci->mc = new_mc; + pr_debug("microcode: CPU%d found a matching microcode update with" + " version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); + } else + vfree(new_mc); + } + + free_equiv_cpu_table(); + + return (int)leftover; +} + +static int get_ucode_fw(void *to, const void *from, size_t n) +{ + memcpy(to, from, n); + return 0; +} + +static int request_microcode_fw(int cpu, struct device *device) +{ + const char *fw_name = "amd-ucode/microcode_amd.bin"; + const struct firmware *firmware; + int ret; + + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + + ret = request_firmware(&firmware, fw_name, device); + if (ret) { + printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name); + return ret; + } + + ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size, + &get_ucode_fw); + + release_firmware(firmware); + + return ret; +} + +static int request_microcode_user(int cpu, const void __user *buf, size_t size) +{ + printk(KERN_WARNING "microcode: AMD microcode update via /dev/cpu/microcode" + "is not supported\n"); + return -1; +} + +static void microcode_fini_cpu_amd(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + vfree(uci->mc); + uci->mc = NULL; +} + +static struct microcode_ops microcode_amd_ops = { + .request_microcode_user = request_microcode_user, + .request_microcode_fw = request_microcode_fw, + .collect_cpu_info = collect_cpu_info_amd, + .apply_microcode = apply_microcode_amd, + .microcode_fini_cpu = microcode_fini_cpu_amd, +}; + +struct microcode_ops * __init init_amd_microcode(void) +{ + return µcode_amd_ops; +} diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c new file mode 100644 index 00000000000..936d8d55f23 --- /dev/null +++ b/arch/x86/kernel/microcode_core.c @@ -0,0 +1,508 @@ +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * This driver allows to upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm + * + * For more information, go to http://www.urbanmyth.org/microcode + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Initial release. + * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added read() support + cleanups. + * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added 'device trimming' support. open(O_WRONLY) zeroes + * and frees the saved copy of applied microcode. + * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Made to use devfs (/dev/cpu/microcode) + cleanups. + * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> + * Added misc device support (now uses both devfs and misc). + * Added MICROCODE_IOCFREE ioctl to clear memory. + * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> + * Messages for error cases (non Intel & no suitable microcode). + * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> + * Removed ->release(). Removed exclusive open and status bitmap. + * Added microcode_rwsem to serialize read()/write()/ioctl(). + * Removed global kernel lock usage. + * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> + * Write 0 to 0x8B msr and then cpuid before reading revision, + * so that it works even if there were no update done by the + * BIOS. Otherwise, reading from 0x8B gives junk (which happened + * to be 0 on my machine which is why it worked even when I + * disabled update by the BIOS) + * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. + * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and + * Tigran Aivazian <tigran@veritas.com> + * Intel Pentium 4 processor support and bugfixes. + * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> + * Bugfix for HT (Hyper-Threading) enabled processors + * whereby processor resources are shared by all logical processors + * in a single CPU package. + * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and + * Tigran Aivazian <tigran@veritas.com>, + * Serialize updates as required on HT processors due to + * speculative nature of implementation. + * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> + * Fix the panic when writing zero-length microcode chunk. + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * Jun Nakajima <jun.nakajima@intel.com> + * Support for the microcode updates in the new format. + * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> + * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl + * because we no longer hold a copy of applied microcode + * in kernel memory. + * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> + * Fix sigmatch() macro to handle old CPUs with pf == 0. + * Thanks to Stuart Swales for pointing out this bug. + */ +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/smp_lock.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("Microcode Update Driver"); +MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); +MODULE_LICENSE("GPL"); + +#define MICROCODE_VERSION "2.00" + +struct microcode_ops *microcode_ops; + +/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ +static DEFINE_MUTEX(microcode_mutex); + +struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; +EXPORT_SYMBOL_GPL(ucode_cpu_info); + +#ifdef CONFIG_MICROCODE_OLD_INTERFACE +static int do_microcode_update(const void __user *buf, size_t size) +{ + cpumask_t old; + int error = 0; + int cpu; + + old = current->cpus_allowed; + + for_each_online_cpu(cpu) { + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!uci->valid) + continue; + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + error = microcode_ops->request_microcode_user(cpu, buf, size); + if (error < 0) + goto out; + if (!error) + microcode_ops->apply_microcode(cpu); + } +out: + set_cpus_allowed_ptr(current, &old); + return error; +} + +static int microcode_open(struct inode *unused1, struct file *unused2) +{ + cycle_kernel_lock(); + return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; +} + +static ssize_t microcode_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + ssize_t ret; + + if ((len >> PAGE_SHIFT) > num_physpages) { + printk(KERN_ERR "microcode: too much data (max %ld pages)\n", + num_physpages); + return -EINVAL; + } + + get_online_cpus(); + mutex_lock(µcode_mutex); + + ret = do_microcode_update(buf, len); + if (!ret) + ret = (ssize_t)len; + + mutex_unlock(µcode_mutex); + put_online_cpus(); + + return ret; +} + +static const struct file_operations microcode_fops = { + .owner = THIS_MODULE, + .write = microcode_write, + .open = microcode_open, +}; + +static struct miscdevice microcode_dev = { + .minor = MICROCODE_MINOR, + .name = "microcode", + .fops = µcode_fops, +}; + +static int __init microcode_dev_init(void) +{ + int error; + + error = misc_register(µcode_dev); + if (error) { + printk(KERN_ERR + "microcode: can't misc_register on minor=%d\n", + MICROCODE_MINOR); + return error; + } + + return 0; +} + +static void microcode_dev_exit(void) +{ + misc_deregister(µcode_dev); +} + +MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); +#else +#define microcode_dev_init() 0 +#define microcode_dev_exit() do { } while (0) +#endif + +/* fake device for request_firmware */ +struct platform_device *microcode_pdev; + +static ssize_t reload_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t sz) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + char *end; + unsigned long val = simple_strtoul(buf, &end, 0); + int err = 0; + int cpu = dev->id; + + if (end == buf) + return -EINVAL; + if (val == 1) { + cpumask_t old = current->cpus_allowed; + + get_online_cpus(); + if (cpu_online(cpu)) { + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + mutex_lock(µcode_mutex); + if (uci->valid) { + err = microcode_ops->request_microcode_fw(cpu, + µcode_pdev->dev); + if (!err) + microcode_ops->apply_microcode(cpu); + } + mutex_unlock(µcode_mutex); + set_cpus_allowed_ptr(current, &old); + } + put_online_cpus(); + } + if (err) + return err; + return sz; +} + +static ssize_t version_show(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.rev); +} + +static ssize_t pf_show(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.pf); +} + +static SYSDEV_ATTR(reload, 0200, NULL, reload_store); +static SYSDEV_ATTR(version, 0400, version_show, NULL); +static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); + +static struct attribute *mc_default_attrs[] = { + &attr_reload.attr, + &attr_version.attr, + &attr_processor_flags.attr, + NULL +}; + +static struct attribute_group mc_attr_group = { + .attrs = mc_default_attrs, + .name = "microcode", +}; + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + mutex_lock(µcode_mutex); + microcode_ops->microcode_fini_cpu(cpu); + uci->valid = 0; + mutex_unlock(µcode_mutex); +} + +static void collect_cpu_info(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + memset(uci, 0, sizeof(*uci)); + if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig)) + uci->valid = 1; +} + +static int microcode_resume_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct cpu_signature nsig; + + pr_debug("microcode: CPU%d resumed\n", cpu); + + if (!uci->mc) + return 1; + + /* + * Let's verify that the 'cached' ucode does belong + * to this cpu (a bit of paranoia): + */ + if (microcode_ops->collect_cpu_info(cpu, &nsig)) { + microcode_fini_cpu(cpu); + return -1; + } + + if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) { + microcode_fini_cpu(cpu); + /* Should we look for a new ucode here? */ + return 1; + } + + return 0; +} + +void microcode_update_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + int err = 0; + + /* + * Check if the system resume is in progress (uci->valid != NULL), + * otherwise just request a firmware: + */ + if (uci->valid) { + err = microcode_resume_cpu(cpu); + } else { + collect_cpu_info(cpu); + if (uci->valid && system_state == SYSTEM_RUNNING) + err = microcode_ops->request_microcode_fw(cpu, + µcode_pdev->dev); + } + if (!err) + microcode_ops->apply_microcode(cpu); +} + +static void microcode_init_cpu(int cpu) +{ + cpumask_t old = current->cpus_allowed; + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + /* We should bind the task to the CPU */ + BUG_ON(raw_smp_processor_id() != cpu); + + mutex_lock(µcode_mutex); + microcode_update_cpu(cpu); + mutex_unlock(µcode_mutex); + + set_cpus_allowed_ptr(current, &old); +} + +static int mc_sysdev_add(struct sys_device *sys_dev) +{ + int err, cpu = sys_dev->id; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("microcode: CPU%d added\n", cpu); + memset(uci, 0, sizeof(*uci)); + + err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + if (err) + return err; + + microcode_init_cpu(cpu); + return 0; +} + +static int mc_sysdev_remove(struct sys_device *sys_dev) +{ + int cpu = sys_dev->id; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("microcode: CPU%d removed\n", cpu); + microcode_fini_cpu(cpu); + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + return 0; +} + +static int mc_sysdev_resume(struct sys_device *dev) +{ + int cpu = dev->id; + + if (!cpu_online(cpu)) + return 0; + + /* only CPU 0 will apply ucode here */ + microcode_update_cpu(0); + return 0; +} + +static struct sysdev_driver mc_sysdev_driver = { + .add = mc_sysdev_add, + .remove = mc_sysdev_remove, + .resume = mc_sysdev_resume, +}; + +static __cpuinit int +mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + microcode_init_cpu(cpu); + case CPU_DOWN_FAILED: + case CPU_DOWN_FAILED_FROZEN: + pr_debug("microcode: CPU%d added\n", cpu); + if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) + printk(KERN_ERR "microcode: Failed to create the sysfs " + "group for CPU%d\n", cpu); + break; + case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: + /* Suspend is in progress, only remove the interface */ + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + pr_debug("microcode: CPU%d removed\n", cpu); + break; + case CPU_DEAD: + case CPU_UP_CANCELED_FROZEN: + /* The CPU refused to come up during a system resume */ + microcode_fini_cpu(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __refdata mc_cpu_notifier = { + .notifier_call = mc_cpu_callback, +}; + +static int __init microcode_init(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + int error; + + if (c->x86_vendor == X86_VENDOR_INTEL) + microcode_ops = init_intel_microcode(); + else if (c->x86_vendor == X86_VENDOR_AMD) + microcode_ops = init_amd_microcode(); + + if (!microcode_ops) { + printk(KERN_ERR "microcode: no support for this CPU vendor\n"); + return -ENODEV; + } + + error = microcode_dev_init(); + if (error) + return error; + microcode_pdev = platform_device_register_simple("microcode", -1, + NULL, 0); + if (IS_ERR(microcode_pdev)) { + microcode_dev_exit(); + return PTR_ERR(microcode_pdev); + } + + get_online_cpus(); + error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + put_online_cpus(); + if (error) { + microcode_dev_exit(); + platform_device_unregister(microcode_pdev); + return error; + } + + register_hotcpu_notifier(&mc_cpu_notifier); + + printk(KERN_INFO + "Microcode Update Driver: v" MICROCODE_VERSION + " <tigran@aivazian.fsnet.co.uk>" + " <peter.oruba@amd.com>\n"); + + return 0; +} + +static void __exit microcode_exit(void) +{ + microcode_dev_exit(); + + unregister_hotcpu_notifier(&mc_cpu_notifier); + + get_online_cpus(); + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + put_online_cpus(); + + platform_device_unregister(microcode_pdev); + + microcode_ops = NULL; + + printk(KERN_INFO + "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); +} + +module_init(microcode_init); +module_exit(microcode_exit); diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c new file mode 100644 index 00000000000..622dc4a2178 --- /dev/null +++ b/arch/x86/kernel/microcode_intel.c @@ -0,0 +1,480 @@ +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * This driver allows to upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm + * + * For more information, go to http://www.urbanmyth.org/microcode + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Initial release. + * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added read() support + cleanups. + * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added 'device trimming' support. open(O_WRONLY) zeroes + * and frees the saved copy of applied microcode. + * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Made to use devfs (/dev/cpu/microcode) + cleanups. + * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> + * Added misc device support (now uses both devfs and misc). + * Added MICROCODE_IOCFREE ioctl to clear memory. + * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> + * Messages for error cases (non Intel & no suitable microcode). + * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> + * Removed ->release(). Removed exclusive open and status bitmap. + * Added microcode_rwsem to serialize read()/write()/ioctl(). + * Removed global kernel lock usage. + * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> + * Write 0 to 0x8B msr and then cpuid before reading revision, + * so that it works even if there were no update done by the + * BIOS. Otherwise, reading from 0x8B gives junk (which happened + * to be 0 on my machine which is why it worked even when I + * disabled update by the BIOS) + * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. + * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and + * Tigran Aivazian <tigran@veritas.com> + * Intel Pentium 4 processor support and bugfixes. + * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> + * Bugfix for HT (Hyper-Threading) enabled processors + * whereby processor resources are shared by all logical processors + * in a single CPU package. + * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and + * Tigran Aivazian <tigran@veritas.com>, + * Serialize updates as required on HT processors due to + * speculative nature of implementation. + * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> + * Fix the panic when writing zero-length microcode chunk. + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * Jun Nakajima <jun.nakajima@intel.com> + * Support for the microcode updates in the new format. + * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> + * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl + * because we no longer hold a copy of applied microcode + * in kernel memory. + * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> + * Fix sigmatch() macro to handle old CPUs with pf == 0. + * Thanks to Stuart Swales for pointing out this bug. + */ +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/smp_lock.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("Microcode Update Driver"); +MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); +MODULE_LICENSE("GPL"); + +struct microcode_header_intel { + unsigned int hdrver; + unsigned int rev; + unsigned int date; + unsigned int sig; + unsigned int cksum; + unsigned int ldrver; + unsigned int pf; + unsigned int datasize; + unsigned int totalsize; + unsigned int reserved[3]; +}; + +struct microcode_intel { + struct microcode_header_intel hdr; + unsigned int bits[0]; +}; + +/* microcode format is extended from prescott processors */ +struct extended_signature { + unsigned int sig; + unsigned int pf; + unsigned int cksum; +}; + +struct extended_sigtable { + unsigned int count; + unsigned int cksum; + unsigned int reserved[3]; + struct extended_signature sigs[0]; +}; + +#define DEFAULT_UCODE_DATASIZE (2000) +#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel)) +#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) +#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable)) +#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature)) +#define DWSIZE (sizeof(u32)) +#define get_totalsize(mc) \ + (((struct microcode_intel *)mc)->hdr.totalsize ? \ + ((struct microcode_intel *)mc)->hdr.totalsize : \ + DEFAULT_UCODE_TOTALSIZE) + +#define get_datasize(mc) \ + (((struct microcode_intel *)mc)->hdr.datasize ? \ + ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) + +#define sigmatch(s1, s2, p1, p2) \ + (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) + +#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) + +/* serialize access to the physical write to MSR 0x79 */ +static DEFINE_SPINLOCK(microcode_update_lock); + +static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu_num); + unsigned int val[2]; + + memset(csig, 0, sizeof(*csig)); + + if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || + cpu_has(c, X86_FEATURE_IA64)) { + printk(KERN_ERR "microcode: CPU%d not a capable Intel " + "processor\n", cpu_num); + return -1; + } + + csig->sig = cpuid_eax(0x00000001); + + if ((c->x86_model >= 5) || (c->x86 > 6)) { + /* get processor flags from MSR 0x17 */ + rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + csig->pf = 1 << ((val[1] >> 18) & 7); + } + + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); + pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", + csig->sig, csig->pf, csig->rev); + + return 0; +} + +static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf) +{ + return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1; +} + +static inline int +update_match_revision(struct microcode_header_intel *mc_header, int rev) +{ + return (mc_header->rev <= rev) ? 0 : 1; +} + +static int microcode_sanity_check(void *mc) +{ + struct microcode_header_intel *mc_header = mc; + struct extended_sigtable *ext_header = NULL; + struct extended_signature *ext_sig; + unsigned long total_size, data_size, ext_table_size; + int sum, orig_sum, ext_sigcount = 0, i; + + total_size = get_totalsize(mc_header); + data_size = get_datasize(mc_header); + if (data_size + MC_HEADER_SIZE > total_size) { + printk(KERN_ERR "microcode: error! " + "Bad data size in microcode data file\n"); + return -EINVAL; + } + + if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { + printk(KERN_ERR "microcode: error! " + "Unknown microcode update format\n"); + return -EINVAL; + } + ext_table_size = total_size - (MC_HEADER_SIZE + data_size); + if (ext_table_size) { + if ((ext_table_size < EXT_HEADER_SIZE) + || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { + printk(KERN_ERR "microcode: error! " + "Small exttable size in microcode data file\n"); + return -EINVAL; + } + ext_header = mc + MC_HEADER_SIZE + data_size; + if (ext_table_size != exttable_size(ext_header)) { + printk(KERN_ERR "microcode: error! " + "Bad exttable size in microcode data file\n"); + return -EFAULT; + } + ext_sigcount = ext_header->count; + } + + /* check extended table checksum */ + if (ext_table_size) { + int ext_table_sum = 0; + int *ext_tablep = (int *)ext_header; + + i = ext_table_size / DWSIZE; + while (i--) + ext_table_sum += ext_tablep[i]; + if (ext_table_sum) { + printk(KERN_WARNING "microcode: aborting, " + "bad extended signature table checksum\n"); + return -EINVAL; + } + } + + /* calculate the checksum */ + orig_sum = 0; + i = (MC_HEADER_SIZE + data_size) / DWSIZE; + while (i--) + orig_sum += ((int *)mc)[i]; + if (orig_sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + if (!ext_table_size) + return 0; + /* check extended signature checksum */ + for (i = 0; i < ext_sigcount; i++) { + ext_sig = (void *)ext_header + EXT_HEADER_SIZE + + EXT_SIGNATURE_SIZE * i; + sum = orig_sum + - (mc_header->sig + mc_header->pf + mc_header->cksum) + + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); + if (sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + } + return 0; +} + +/* + * return 0 - no update found + * return 1 - found update + */ +static int +get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev) +{ + struct microcode_header_intel *mc_header = mc; + struct extended_sigtable *ext_header; + unsigned long total_size = get_totalsize(mc_header); + int ext_sigcount, i; + struct extended_signature *ext_sig; + + if (!update_match_revision(mc_header, rev)) + return 0; + + if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf)) + return 1; + + /* Look for ext. headers: */ + if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) + return 0; + + ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE; + ext_sigcount = ext_header->count; + ext_sig = (void *)ext_header + EXT_HEADER_SIZE; + + for (i = 0; i < ext_sigcount; i++) { + if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf)) + return 1; + ext_sig++; + } + return 0; +} + +static void apply_microcode(int cpu) +{ + unsigned long flags; + unsigned int val[2]; + int cpu_num = raw_smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct microcode_intel *mc_intel = uci->mc; + + /* We should bind the task to the CPU */ + BUG_ON(cpu_num != cpu); + + if (mc_intel == NULL) + return; + + /* serialize access to the physical write to MSR 0x79 */ + spin_lock_irqsave(µcode_update_lock, flags); + + /* write microcode via MSR 0x79 */ + wrmsr(MSR_IA32_UCODE_WRITE, + (unsigned long) mc_intel->bits, + (unsigned long) mc_intel->bits >> 16 >> 16); + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); + + spin_unlock_irqrestore(µcode_update_lock, flags); + if (val[1] != mc_intel->hdr.rev) { + printk(KERN_ERR "microcode: CPU%d update from revision " + "0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]); + return; + } + printk(KERN_INFO "microcode: CPU%d updated from revision " + "0x%x to 0x%x, date = %04x-%02x-%02x \n", + cpu_num, uci->cpu_sig.rev, val[1], + mc_intel->hdr.date & 0xffff, + mc_intel->hdr.date >> 24, + (mc_intel->hdr.date >> 16) & 0xff); + uci->cpu_sig.rev = val[1]; +} + +static int generic_load_microcode(int cpu, void *data, size_t size, + int (*get_ucode_data)(void *, const void *, size_t)) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + u8 *ucode_ptr = data, *new_mc = NULL, *mc; + int new_rev = uci->cpu_sig.rev; + unsigned int leftover = size; + + while (leftover) { + struct microcode_header_intel mc_header; + unsigned int mc_size; + + if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header))) + break; + + mc_size = get_totalsize(&mc_header); + if (!mc_size || mc_size > leftover) { + printk(KERN_ERR "microcode: error!" + "Bad data in microcode data file\n"); + break; + } + + mc = vmalloc(mc_size); + if (!mc) + break; + + if (get_ucode_data(mc, ucode_ptr, mc_size) || + microcode_sanity_check(mc) < 0) { + vfree(mc); + break; + } + + if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) { + if (new_mc) + vfree(new_mc); + new_rev = mc_header.rev; + new_mc = mc; + } else + vfree(mc); + + ucode_ptr += mc_size; + leftover -= mc_size; + } + + if (new_mc) { + if (!leftover) { + if (uci->mc) + vfree(uci->mc); + uci->mc = (struct microcode_intel *)new_mc; + pr_debug("microcode: CPU%d found a matching microcode update with" + " version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); + } else + vfree(new_mc); + } + + return (int)leftover; +} + +static int get_ucode_fw(void *to, const void *from, size_t n) +{ + memcpy(to, from, n); + return 0; +} + +static int request_microcode_fw(int cpu, struct device *device) +{ + char name[30]; + struct cpuinfo_x86 *c = &cpu_data(cpu); + const struct firmware *firmware; + int ret; + + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + sprintf(name, "intel-ucode/%02x-%02x-%02x", + c->x86, c->x86_model, c->x86_mask); + ret = request_firmware(&firmware, name, device); + if (ret) { + pr_debug("microcode: data file %s load failed\n", name); + return ret; + } + + ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size, + &get_ucode_fw); + + release_firmware(firmware); + + return ret; +} + +static int get_ucode_user(void *to, const void *from, size_t n) +{ + return copy_from_user(to, from, n); +} + +static int request_microcode_user(int cpu, const void __user *buf, size_t size) +{ + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + + return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user); +} + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + vfree(uci->mc); + uci->mc = NULL; +} + +struct microcode_ops microcode_intel_ops = { + .request_microcode_user = request_microcode_user, + .request_microcode_fw = request_microcode_fw, + .collect_cpu_info = collect_cpu_info, + .apply_microcode = apply_microcode, + .microcode_fini_cpu = microcode_fini_cpu, +}; + +struct microcode_ops * __init init_intel_microcode(void) +{ + return µcode_intel_ops; +} + diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c..efc2f361fe8 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include <asm/io.h> #include <asm/msr.h> #include <asm/acpi.h> +#include <asm/mmconfig.h> #include "../pci/pci.h" @@ -237,7 +238,7 @@ static struct dmi_system_id __devinitdata mmconf_dmi_table[] = { {} }; -void __init check_enable_amd_mmconf_dmi(void) +void __cpuinit check_enable_amd_mmconf_dmi(void) { dmi_check_system(mmconf_dmi_table); } diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c index a888e67f587..6ba87830d4b 100644 --- a/arch/x86/kernel/module_64.c +++ b/arch/x86/kernel/module_64.c @@ -22,6 +22,7 @@ #include <linux/fs.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/mm.h> #include <linux/slab.h> #include <linux/bug.h> @@ -150,7 +151,8 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL; + const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL, + *para = NULL; char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { @@ -160,6 +162,8 @@ int module_finalize(const Elf_Ehdr *hdr, alt = s; if (!strcmp(".smp_locks", secstrings + s->sh_name)) locks= s; + if (!strcmp(".parainstructions", secstrings + s->sh_name)) + para = s; } if (alt) { @@ -175,6 +179,11 @@ int module_finalize(const Elf_Ehdr *hdr, tseg, tseg + text->sh_size); } + if (para) { + void *pseg = (void *)para->sh_addr; + apply_paravirt(pseg, pseg + para->sh_size); + } + return module_bug_finalize(hdr, sechdrs, me); } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 404683b94e7..f98f4e1dba0 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -25,6 +25,9 @@ #include <asm/proto.h> #include <asm/acpi.h> #include <asm/bios_ebda.h> +#include <asm/e820.h> +#include <asm/trampoline.h> +#include <asm/setup.h> #include <mach_apic.h> #ifdef CONFIG_X86_32 @@ -32,28 +35,6 @@ #include <mach_mpparse.h> #endif -/* Have we found an MP table */ -int smp_found_config; - -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) -int mp_bus_id_to_type[MAX_MP_BUSSES]; -#endif - -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; - -static int mp_current_pci_id; - -int pic_mode; - -/* - * Intel MP BIOS table parsing routines: - */ - /* * Checksum an MP configuration block. */ @@ -68,19 +49,7 @@ static int __init mpf_checksum(unsigned char *mp, int len) return sum & 0xFF; } -#ifdef CONFIG_X86_NUMAQ -/* - * Have to match translation table entries to main table entries by counter - * hence the mpc_record variable .... can't see a less disgusting way of - * doing this .... - */ - -static int mpc_record; -static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] - __cpuinitdata; -#endif - -static void __cpuinit MP_processor_info(struct mpc_config_processor *m) +static void __init MP_processor_info(struct mpc_config_processor *m) { int apicid; char *bootup_cpu = ""; @@ -89,11 +58,12 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) disabled_cpus++; return; } -#ifdef CONFIG_X86_NUMAQ - apicid = mpc_apic_id(m, translation_table[mpc_record]); -#else - apicid = m->mpc_apicid; -#endif + + if (x86_quirks->mpc_apic_id) + apicid = x86_quirks->mpc_apic_id(m); + else + apicid = m->mpc_apicid; + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { bootup_cpu = " (Bootup-CPU)"; boot_cpu_physical_apicid = m->mpc_apicid; @@ -103,18 +73,17 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) generic_processor_info(apicid, m->mpc_apicver); } +#ifdef CONFIG_X86_IO_APIC static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; - memcpy(str, m->mpc_bustype, 6); str[6] = 0; -#ifdef CONFIG_X86_NUMAQ - mpc_oem_bus_info(m, str, translation_table[mpc_record]); -#else - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); -#endif + if (x86_quirks->mpc_oem_bus_info) + x86_quirks->mpc_oem_bus_info(m, str); + else + apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->mpc_busid, str); #if MAX_MP_BUSSES < 256 if (m->mpc_busid >= MAX_MP_BUSSES) { @@ -131,12 +100,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m) mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; #endif } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { -#ifdef CONFIG_X86_NUMAQ - mpc_oem_pci_bus(m, translation_table[mpc_record]); -#endif + if (x86_quirks->mpc_oem_pci_bus) + x86_quirks->mpc_oem_pci_bus(m); + clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; #if defined(CONFIG_EISA) || defined (CONFIG_MCA) mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { @@ -147,6 +114,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) } else printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); } +#endif #ifdef CONFIG_X86_IO_APIC @@ -176,117 +144,111 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) if (bad_ioapic(m->mpc_apicaddr)) return; - mp_ioapics[nr_ioapics] = *m; + mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr; + mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid; + mp_ioapics[nr_ioapics].mp_type = m->mpc_type; + mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver; + mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags; nr_ioapics++; } -static void __init MP_intsrc_info(struct mpc_config_intsrc *m) +static void print_MP_intsrc_info(struct mpc_config_intsrc *m) { - mp_irqs[mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); } -#endif - -static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) +static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq) { - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC LINT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, - m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3, + (mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus, + mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq); } -#ifdef CONFIG_X86_NUMAQ -static void __init MP_translation_info(struct mpc_config_translation *m) +static void __init assign_to_mp_irq(struct mpc_config_intsrc *m, + struct mp_config_intsrc *mp_irq) { - printk(KERN_INFO - "Translation: record %d, type %d, quad %d, global %d, local %d\n", - mpc_record, m->trans_type, m->trans_quad, m->trans_global, - m->trans_local); + mp_irq->mp_dstapic = m->mpc_dstapic; + mp_irq->mp_type = m->mpc_type; + mp_irq->mp_irqtype = m->mpc_irqtype; + mp_irq->mp_irqflag = m->mpc_irqflag; + mp_irq->mp_srcbus = m->mpc_srcbus; + mp_irq->mp_srcbusirq = m->mpc_srcbusirq; + mp_irq->mp_dstirq = m->mpc_dstirq; +} - if (mpc_record >= MAX_MPC_ENTRY) - printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); - else - translation_table[mpc_record] = m; /* stash this for later */ - if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) - node_set_online(m->trans_quad); +static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq, + struct mpc_config_intsrc *m) +{ + m->mpc_dstapic = mp_irq->mp_dstapic; + m->mpc_type = mp_irq->mp_type; + m->mpc_irqtype = mp_irq->mp_irqtype; + m->mpc_irqflag = mp_irq->mp_irqflag; + m->mpc_srcbus = mp_irq->mp_srcbus; + m->mpc_srcbusirq = mp_irq->mp_srcbusirq; + m->mpc_dstirq = mp_irq->mp_dstirq; } -/* - * Read/parse the MPC oem tables - */ +static int __init mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq, + struct mpc_config_intsrc *m) +{ + if (mp_irq->mp_dstapic != m->mpc_dstapic) + return 1; + if (mp_irq->mp_type != m->mpc_type) + return 2; + if (mp_irq->mp_irqtype != m->mpc_irqtype) + return 3; + if (mp_irq->mp_irqflag != m->mpc_irqflag) + return 4; + if (mp_irq->mp_srcbus != m->mpc_srcbus) + return 5; + if (mp_irq->mp_srcbusirq != m->mpc_srcbusirq) + return 6; + if (mp_irq->mp_dstirq != m->mpc_dstirq) + return 7; + + return 0; +} -static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, - unsigned short oemsize) +static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { - int count = sizeof(*oemtable); /* the header size */ - unsigned char *oemptr = ((unsigned char *)oemtable) + count; - - mpc_record = 0; - printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", - oemtable); - if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) { - printk(KERN_WARNING - "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", - oemtable->oem_signature[0], oemtable->oem_signature[1], - oemtable->oem_signature[2], oemtable->oem_signature[3]); - return; - } - if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) { - printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); - return; - } - while (count < oemtable->oem_length) { - switch (*oemptr) { - case MP_TRANSLATION: - { - struct mpc_config_translation *m = - (struct mpc_config_translation *)oemptr; - MP_translation_info(m); - oemptr += sizeof(*m); - count += sizeof(*m); - ++mpc_record; - break; - } - default: - { - printk(KERN_WARNING - "Unrecognised OEM table entry type! - %d\n", - (int)*oemptr); - return; - } - } + int i; + + print_MP_intsrc_info(m); + + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) + return; } + + assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); } -static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid) +#endif + +static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) { - if (strncmp(oem, "IBM NUMA", 8)) - printk("Warning! May not be a NUMA-Q system!\n"); - if (mpc->mpc_oemptr) - smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr, - mpc->mpc_oemsize); + apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC LINT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, + m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); } -#endif /* CONFIG_X86_NUMAQ */ /* * Read/parse the MPC */ -static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) +static int __init smp_check_mpc(struct mp_config_table *mpc, char *oem, + char *str) { - char str[16]; - char oem[10]; - int count = sizeof(*mpc); - unsigned char *mpt = ((unsigned char *)mpc) + count; if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) { printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n", @@ -309,19 +271,41 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) } memcpy(oem, mpc->mpc_oem, 8); oem[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); + printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem); memcpy(str, mpc->mpc_productid, 12); str[12] = 0; - printk("Product ID: %s ", str); -#ifdef CONFIG_X86_32 - mps_oem_check(mpc, oem, str); -#endif - printk(KERN_INFO "MPTABLE: Product ID: %s ", str); + printk(KERN_INFO "MPTABLE: Product ID: %s\n", str); printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); + return 1; +} + +static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) +{ + char str[16]; + char oem[10]; + + int count = sizeof(*mpc); + unsigned char *mpt = ((unsigned char *)mpc) + count; + + if (!smp_check_mpc(mpc, oem, str)) + return 0; + +#ifdef CONFIG_X86_32 + /* + * need to make sure summit and es7000's mps_oem_check is safe to be + * called early via genericarch 's mps_oem_check + */ + if (early) { +#ifdef CONFIG_X86_NUMAQ + numaq_mps_oem_check(mpc, oem, str); +#endif + } else + mps_oem_check(mpc, oem, str); +#endif /* save the local APIC address, it might be non-default */ if (!acpi_lapic) mp_lapic_addr = mpc->mpc_lapic; @@ -329,12 +313,17 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) if (early) return 1; + if (mpc->mpc_oemptr && x86_quirks->smp_read_mpc_oem) { + struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr; + x86_quirks->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize); + } + /* * Now process the configuration blocks. */ -#ifdef CONFIG_X86_NUMAQ - mpc_record = 0; -#endif + if (x86_quirks->mpc_record) + *x86_quirks->mpc_record = 0; + while (count < mpc->mpc_length) { switch (*mpt) { case MP_PROCESSOR: @@ -352,7 +341,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) { struct mpc_config_bus *m = (struct mpc_config_bus *)mpt; +#ifdef CONFIG_X86_IO_APIC MP_bus_info(m); +#endif mpt += sizeof(*m); count += sizeof(*m); break; @@ -398,11 +389,17 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) count = mpc->mpc_length; break; } -#ifdef CONFIG_X86_NUMAQ - ++mpc_record; -#endif + if (x86_quirks->mpc_record) + (*x86_quirks->mpc_record)++; } + +#ifdef CONFIG_X86_GENERICARCH + generic_bigsmp_probe(); +#endif + +#ifdef CONFIG_X86_32 setup_apic_routing(); +#endif if (!num_processors) printk(KERN_ERR "MPTABLE: no processors registered!\n"); return num_processors; @@ -427,7 +424,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) intsrc.mpc_type = MP_INTSRC; intsrc.mpc_irqflag = 0; /* conforming */ intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid; intsrc.mpc_irqtype = mp_INT; @@ -488,40 +485,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) MP_intsrc_info(&intsrc); } -#endif -static inline void __init construct_default_ISA_mptable(int mpc_default_type) +static void __init construct_ioapic_table(int mpc_default_type) { - struct mpc_config_processor processor; - struct mpc_config_bus bus; -#ifdef CONFIG_X86_IO_APIC struct mpc_config_ioapic ioapic; -#endif - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } + struct mpc_config_bus bus; bus.mpc_type = MP_BUS; bus.mpc_busid = 0; @@ -550,7 +518,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) MP_bus_info(&bus); } -#ifdef CONFIG_X86_IO_APIC ioapic.mpc_type = MP_IOAPIC; ioapic.mpc_apicid = 2; ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; @@ -562,7 +529,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) * We set up most of the low 16 IO-APIC pins according to MPS rules. */ construct_default_ioirq_mptable(mpc_default_type); +} +#else +static inline void __init construct_ioapic_table(int mpc_default_type) { } #endif + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + construct_ioapic_table(mpc_default_type); + lintsrc.mpc_type = MP_LINTSRC; lintsrc.mpc_irqflag = 0; /* conforming */ lintsrc.mpc_srcbusid = 0; @@ -580,10 +582,14 @@ static struct intel_mp_floating *mpf_found; /* * Scan the memory blocks for an SMP configuration block. */ -static void __init __get_smp_config(unsigned early) +static void __init __get_smp_config(unsigned int early) { struct intel_mp_floating *mpf = mpf_found; + if (x86_quirks->mach_get_smp_config) { + if (x86_quirks->mach_get_smp_config(early)) + return; + } if (acpi_lapic && early) return; /* @@ -600,7 +606,7 @@ static void __init __get_smp_config(unsigned early) printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); -#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) if (mpf->mpf_feature2 & (1 << 7)) { printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); pic_mode = 1; @@ -632,7 +638,9 @@ static void __init __get_smp_config(unsigned early) * override the defaults. */ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 0; +#endif printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. " @@ -689,7 +697,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, unsigned int *bp = phys_to_virt(base); struct intel_mp_floating *mpf; - Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); + apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n", + bp, length); BUILD_BUG_ON(sizeof(*mpf) != 16); while (length > 0) { @@ -699,15 +708,21 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, !mpf_checksum((unsigned char *)bp, 16) && ((mpf->mpf_specification == 1) || (mpf->mpf_specification == 4))) { - +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif mpf_found = mpf; -#ifdef CONFIG_X86_32 + printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", mpf, virt_to_phys(mpf)); - reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, + + if (!reserve) + return 1; + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, BOOTMEM_DEFAULT); if (mpf->mpf_physptr) { + unsigned long size = PAGE_SIZE; +#ifdef CONFIG_X86_32 /* * We cannot access to MPC table to compute * table size yet, as only few megabytes from @@ -717,24 +732,15 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, * PAGE_SIZE from mpg->mpf_physptr yields BUG() * in reserve_bootmem. */ - unsigned long size = PAGE_SIZE; unsigned long end = max_low_pfn * PAGE_SIZE; if (mpf->mpf_physptr + size > end) size = end - mpf->mpf_physptr; - reserve_bootmem(mpf->mpf_physptr, size, +#endif + reserve_bootmem_generic(mpf->mpf_physptr, size, BOOTMEM_DEFAULT); } -#else - if (!reserve) - return 1; - - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); - if (mpf->mpf_physptr) - reserve_bootmem_generic(mpf->mpf_physptr, - PAGE_SIZE); -#endif - return 1; + return 1; } bp += 4; length -= 16; @@ -742,10 +748,14 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, return 0; } -static void __init __find_smp_config(unsigned reserve) +static void __init __find_smp_config(unsigned int reserve) { unsigned int address; + if (x86_quirks->mach_find_smp_config) { + if (x86_quirks->mach_find_smp_config(reserve)) + return; + } /* * FIXME: Linux assumes you have 640K of base ram.. * this continues the error... @@ -790,298 +800,294 @@ void __init find_smp_config(void) __find_smp_config(1); } -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ +#ifdef CONFIG_X86_IO_APIC +static u8 __initdata irq_used[MAX_IRQ_SOURCES]; -/* - * Keep this outside and initialized to 0, for !CONFIG_ACPI builds: - */ -int es7000_plat; +static int __init get_MP_intsrc_index(struct mpc_config_intsrc *m) +{ + int i; -#ifdef CONFIG_ACPI + if (m->mpc_irqtype != mp_INT) + return 0; -#ifdef CONFIG_X86_IO_APIC + if (m->mpc_irqflag != 0x0f) + return 0; -#define MP_ISA_BUS 0 + /* not legacy */ -extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + for (i = 0; i < mp_irq_entries; i++) { + if (mp_irqs[i].mp_irqtype != mp_INT) + continue; -static int mp_find_ioapic(int gsi) -{ - int i = 0; + if (mp_irqs[i].mp_irqflag != 0x0f) + continue; - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; + if (mp_irqs[i].mp_srcbus != m->mpc_srcbus) + continue; + if (mp_irqs[i].mp_srcbusirq != m->mpc_srcbusirq) + continue; + if (irq_used[i]) { + /* already claimed */ + return -2; + } + irq_used[i] = 1; + return i; } - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + /* not found */ return -1; } -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); +#define SPARE_SLOT_NUM 20 + +static struct mpc_config_intsrc __initdata *m_spare[SPARE_SLOT_NUM]; #endif -} -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +static int __init replace_intsrc_all(struct mp_config_table *mpc, + unsigned long mpc_new_phys, + unsigned long mpc_new_length) { - int idx = 0; - - if (bad_ioapic(address)) - return; +#ifdef CONFIG_X86_IO_APIC + int i; + int nr_m_spare = 0; +#endif - idx = nr_ioapics; + int count = sizeof(*mpc); + unsigned char *mpt = ((unsigned char *)mpc) + count; - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; + printk(KERN_INFO "mpc_length %x\n", mpc->mpc_length); + while (count < mpc->mpc_length) { + switch (*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m = + (struct mpc_config_processor *)mpt; + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m = + (struct mpc_config_bus *)mpt; + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { + mpt += sizeof(struct mpc_config_ioapic); + count += sizeof(struct mpc_config_ioapic); + break; + } + case MP_INTSRC: + { +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_intsrc *m = + (struct mpc_config_intsrc *)mpt; - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].mpc_apicver = 0; + printk(KERN_INFO "OLD "); + print_MP_intsrc_info(m); + i = get_MP_intsrc_index(m); + if (i > 0) { + assign_to_mpc_intsrc(&mp_irqs[i], m); + printk(KERN_INFO "NEW "); + print_mp_irq_info(&mp_irqs[i]); + } else if (!i) { + /* legacy, do nothing */ + } else if (nr_m_spare < SPARE_SLOT_NUM) { + /* + * not found (-1), or duplicated (-2) + * are invalid entries, + * we need to use the slot later + */ + m_spare[nr_m_spare] = m; + nr_m_spare++; + } #endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} + mpt += sizeof(struct mpc_config_intsrc); + count += sizeof(struct mpc_config_intsrc); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m = + (struct mpc_config_lintsrc *)mpt; + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + default: + /* wrong mptable */ + printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n"); + printk(KERN_ERR "type %x\n", *mpt); + print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16, + 1, mpc, mpc->mpc_length, 1); + goto out; + } + } -void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; +#ifdef CONFIG_X86_IO_APIC + for (i = 0; i < mp_irq_entries; i++) { + if (irq_used[i]) + continue; - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + if (mp_irqs[i].mp_irqtype != mp_INT) + continue; - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; + if (mp_irqs[i].mp_irqflag != 0x0f) + continue; - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ + if (nr_m_spare > 0) { + printk(KERN_INFO "*NEW* found "); + nr_m_spare--; + assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]); + m_spare[nr_m_spare] = NULL; + } else { + struct mpc_config_intsrc *m = + (struct mpc_config_intsrc *)mpt; + count += sizeof(struct mpc_config_intsrc); + if (!mpc_new_phys) { + printk(KERN_INFO "No spare slots, try to append...take your risk, new mpc_length %x\n", count); + } else { + if (count <= mpc_new_length) + printk(KERN_INFO "No spare slots, try to append..., new mpc_length %x\n", count); + else { + printk(KERN_ERR "mpc_new_length %lx is too small\n", mpc_new_length); + goto out; + } + } + assign_to_mpc_intsrc(&mp_irqs[i], m); + mpc->mpc_length = count; + mpt += sizeof(struct mpc_config_intsrc); + } + print_mp_irq_info(&mp_irqs[i]); + } +#endif +out: + /* update checksum */ + mpc->mpc_checksum = 0; + mpc->mpc_checksum -= mpf_checksum((unsigned char *)mpc, + mpc->mpc_length); - MP_intsrc_info(&intsrc); + return 0; } -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; +static int __initdata enable_update_mptable; -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; -#endif - set_bit(MP_ISA_BUS, mp_bus_not_pci); - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); +static int __init update_mptable_setup(char *str) +{ + enable_update_mptable = 1; + return 0; +} +early_param("update_mptable", update_mptable_setup); - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; +static unsigned long __initdata mpc_new_phys; +static unsigned long mpc_new_length __initdata = 4096; - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; +/* alloc_mptable or alloc_mptable=4k */ +static int __initdata alloc_mptable; +static int __init parse_alloc_mptable_opt(char *p) +{ + enable_update_mptable = 1; + alloc_mptable = 1; + if (!p) + return 0; + mpc_new_length = memparse(p, &p); + return 0; +} +early_param("alloc_mptable", parse_alloc_mptable_opt); - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +void __init early_reserve_e820_mpc_new(void) +{ + if (enable_update_mptable && alloc_mptable) { + u64 startt = 0; +#ifdef CONFIG_X86_TRAMPOLINE + startt = TRAMPOLINE_BASE; #endif - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - MP_intsrc_info(&intsrc); + mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4); } } -int mp_register_gsi(u32 gsi, int triggering, int polarity) +static int __init update_mp_table(void) { - int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 + char str[16]; + char oem[10]; + struct intel_mp_floating *mpf; + struct mp_config_table *mpc; + struct mp_config_table *mpc_new; + + if (!enable_update_mptable) + return 0; + + mpf = mpf_found; + if (!mpf) + return 0; - static int pci_irq = IRQ_COMPRESSION_START; /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. + * Now see if we need to go further. */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else + if (mpf->mpf_feature1 != 0) + return 0; - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; -#endif + if (!mpf->mpf_physptr) + return 0; - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; + mpc = phys_to_virt(mpf->mpf_physptr); - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } + if (!smp_check_mpc(mpc, oem, str)) + return 0; - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf)); + printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr); -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; + if (mpc_new_phys && mpc->mpc_length > mpc_new_length) { + mpc_new_phys = 0; + printk(KERN_INFO "mpc_new_length is %ld, please use alloc_mptable=8k\n", + mpc_new_length); } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif + + if (!mpc_new_phys) { + unsigned char old, new; + /* check if we can change the postion */ + mpc->mpc_checksum = 0; + old = mpf_checksum((unsigned char *)mpc, mpc->mpc_length); + mpc->mpc_checksum = 0xff; + new = mpf_checksum((unsigned char *)mpc, mpc->mpc_length); + if (old == new) { + printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n"); + return 0; + } + printk(KERN_INFO "use in-positon replacing\n"); + } else { + mpf->mpf_physptr = mpc_new_phys; + mpc_new = phys_to_virt(mpc_new_phys); + memcpy(mpc_new, mpc, mpc->mpc_length); + mpc = mpc_new; + /* check if we can modify that */ + if (mpc_new_phys - mpf->mpf_physptr) { + struct intel_mp_floating *mpf_new; + /* steal 16 bytes from [0, 1k) */ + printk(KERN_INFO "mpf new: %x\n", 0x400 - 16); + mpf_new = phys_to_virt(0x400 - 16); + memcpy(mpf_new, mpf, 16); + mpf = mpf_new; + mpf->mpf_physptr = mpc_new_phys; + } + mpf->mpf_checksum = 0; + mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16); + printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr); } - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 /* - * For GSI >= 64, use IRQ compression + * only replace the one with mp_INT and + * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + * already in mp_irqs , stored by ... and mp_config_acpi_gsi, + * may need pci=routeirq for all coverage */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; + replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length); + + return 0; } -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ +late_initcall(update_mp_table); diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 1f3abe048e9..2e2af5d1819 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -72,21 +72,28 @@ static ssize_t msr_read(struct file *file, char __user *buf, u32 data[2]; u32 reg = *ppos; int cpu = iminor(file->f_path.dentry->d_inode); - int err; + int err = 0; + ssize_t bytes = 0; if (count % 8) return -EINVAL; /* Invalid chunk size */ for (; count; count -= 8) { err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]); - if (err) - return -EIO; - if (copy_to_user(tmp, &data, 8)) - return -EFAULT; + if (err) { + if (err == -EFAULT) /* Fix idiotic error code */ + err = -EIO; + break; + } + if (copy_to_user(tmp, &data, 8)) { + err = -EFAULT; + break; + } tmp += 2; + bytes += 8; } - return ((char __user *)tmp) - buf; + return bytes ? bytes : err; } static ssize_t msr_write(struct file *file, const char __user *buf, @@ -96,34 +103,49 @@ static ssize_t msr_write(struct file *file, const char __user *buf, u32 data[2]; u32 reg = *ppos; int cpu = iminor(file->f_path.dentry->d_inode); - int err; + int err = 0; + ssize_t bytes = 0; if (count % 8) return -EINVAL; /* Invalid chunk size */ for (; count; count -= 8) { - if (copy_from_user(&data, tmp, 8)) - return -EFAULT; + if (copy_from_user(&data, tmp, 8)) { + err = -EFAULT; + break; + } err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]); - if (err) - return -EIO; + if (err) { + if (err == -EFAULT) /* Fix idiotic error code */ + err = -EIO; + break; + } tmp += 2; + bytes += 8; } - return ((char __user *)tmp) - buf; + return bytes ? bytes : err; } static int msr_open(struct inode *inode, struct file *file) { unsigned int cpu = iminor(file->f_path.dentry->d_inode); struct cpuinfo_x86 *c = &cpu_data(cpu); + int ret = 0; - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ - if (!cpu_has(c, X86_FEATURE_MSR)) - return -EIO; /* MSR not supported */ + lock_kernel(); + cpu = iminor(file->f_path.dentry->d_inode); - return 0; + if (cpu >= NR_CPUS || !cpu_online(cpu)) { + ret = -ENXIO; /* No such CPU */ + goto out; + } + c = &cpu_data(cpu); + if (!cpu_has(c, X86_FEATURE_MSR)) + ret = -EIO; /* MSR not supported */ +out: + unlock_kernel(); + return ret; } /* @@ -141,8 +163,8 @@ static int __cpuinit msr_device_create(int cpu) { struct device *dev; - dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu), - "msr%d", cpu); + dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu), + NULL, "msr%d", cpu); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi.c index 5a29ded994f..2c97f07f1c2 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi.c @@ -6,10 +6,13 @@ * Fixes: * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. * Mikael Pettersson : Power Management for local APIC NMI watchdog. + * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. * Pavel Machek and * Mikael Pettersson : PM converted to driver model. Disable/enable API. */ +#include <asm/apic.h> + #include <linux/nmi.h> #include <linux/mm.h> #include <linux/delay.h> @@ -17,20 +20,26 @@ #include <linux/module.h> #include <linux/sysdev.h> #include <linux/sysctl.h> +#include <linux/percpu.h> #include <linux/kprobes.h> #include <linux/cpumask.h> +#include <linux/kernel_stat.h> #include <linux/kdebug.h> +#include <linux/smp.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> #include <asm/proto.h> +#include <asm/timer.h> + #include <asm/mce.h> #include <mach_traps.h> int unknown_nmi_panic; int nmi_watchdog_enabled; -int panic_on_unrecovered_nmi; static cpumask_t backtrace_mask = CPU_MASK_NONE; @@ -41,104 +50,148 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +EXPORT_SYMBOL(nmi_active); + +unsigned int nmi_watchdog = NMI_NONE; +EXPORT_SYMBOL(nmi_watchdog); + static int panic_on_timeout; -unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; - static DEFINE_PER_CPU(short, wd_enabled); +static int endflag __initdata; -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) +static inline unsigned int get_nmi_count(int cpu) { - if (nmi_watchdog != NMI_DEFAULT) - return; - nmi_watchdog = NMI_NONE; +#ifdef CONFIG_X86_64 + return cpu_pda(cpu)->__nmi_count; +#else + return nmi_count(cpu); +#endif } -static int endflag __initdata = 0; +static inline int mce_in_progress(void) +{ +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE) + return atomic_read(&mce_entry) > 0; +#endif + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ +#ifdef CONFIG_X86_64 + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +#else + return per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; +#endif +} #ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when +/* + * The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all * CPUs during the test make them busy. */ static __init void nmi_cpu_busy(void *data) { local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ + /* + * Intentionally don't use cpu_relax here. This is + * to make sure that the performance counter really ticks, + * even if there is a simulator or similar that catches the + * pause instruction. On a real HT machine this is fine because + * all other CPUs are busy with "useless" delay loops and don't + * care if they get somewhat less cycles. + */ while (endflag == 0) mb(); } #endif +static void report_broken_nmi(int cpu, int *prev_nmi_count) +{ + printk(KERN_CONT "\n"); + + printk(KERN_WARNING + "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", + cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); + + printk(KERN_WARNING + "Please report this to bugzilla.kernel.org,\n"); + printk(KERN_WARNING + "and attach the output of the 'dmesg' command.\n"); + + per_cpu(wd_enabled, cpu) = 0; + atomic_dec(&nmi_active); +} + int __init check_nmi_watchdog(void) { - int *prev_nmi_count; + unsigned int *prev_nmi_count; int cpu; - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) + if (!nmi_watchdog_active() || !atomic_read(&nmi_active)) return 0; - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); #ifdef CONFIG_SMP if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); #endif - for (cpu = 0; cpu < NR_CPUS; cpu++) - prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; + for_each_possible_cpu(cpu) + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks + mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - cpu_pda(cpu)->__nmi_count); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) + report_broken_nmi(cpu, prev_nmi_count); } endflag = 1; if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ + /* + * now that we know it works we can reduce NMI frequency to + * something more reasonable; makes a difference in some configs + */ if (nmi_watchdog == NMI_LOCAL_APIC) nmi_hz = lapic_adjust_nmi_hz(1); kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); +#ifdef CONFIG_X86_32 + timer_ack = 0; +#endif + return -1; } static int __init setup_nmi_watchdog(char *str) { - int nmi; + unsigned int nmi; - if (!strncmp(str,"panic",5)) { + if (!strncmp(str, "panic", 5)) { panic_on_timeout = 1; str = strchr(str, ','); if (!str) @@ -148,15 +201,17 @@ static int __init setup_nmi_watchdog(char *str) get_option(&str, &nmi); - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) + if (nmi >= NMI_INVALID) return 0; nmi_watchdog = nmi; return 1; } - __setup("nmi_watchdog=", setup_nmi_watchdog); +/* + * Suspend/resume support + */ #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ @@ -195,7 +250,8 @@ static int __init init_lapic_nmi_sysfs(void) { int error; - /* should really be a BUG_ON but b/c this is an + /* + * should really be a BUG_ON but b/c this is an * init call, it just doesn't work. -dcz */ if (nmi_watchdog != NMI_LOCAL_APIC) @@ -209,6 +265,7 @@ static int __init init_lapic_nmi_sysfs(void) error = sysdev_register(&device_lapic_nmi); return error; } + /* must come after the local APIC's device_initcall() */ late_initcall(init_lapic_nmi_sysfs); @@ -225,7 +282,7 @@ static void __acpi_nmi_enable(void *__unused) void acpi_nmi_enable(void) { if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); + on_each_cpu(__acpi_nmi_enable, NULL, 1); } static void __acpi_nmi_disable(void *__unused) @@ -239,7 +296,16 @@ static void __acpi_nmi_disable(void *__unused) void acpi_nmi_disable(void) { if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); + on_each_cpu(__acpi_nmi_disable, NULL, 1); +} + +/* + * This function is called as soon the LAPIC NMI watchdog driver has everything + * in place and it's ready to check if the NMIs belong to the NMI watchdog + */ +void cpu_nmi_set_wd_enabled(void) +{ + __get_cpu_var(wd_enabled) = 1; } void setup_apic_nmi_watchdog(void *unused) @@ -249,12 +315,11 @@ void setup_apic_nmi_watchdog(void *unused) /* cheap hack to support suspend/resume */ /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) return; switch (nmi_watchdog) { case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; if (lapic_watchdog_init(nmi_hz) < 0) { __get_cpu_var(wd_enabled) = 0; return; @@ -269,9 +334,8 @@ void setup_apic_nmi_watchdog(void *unused) void stop_apic_nmi_watchdog(void *unused) { /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; + if (!nmi_watchdog_active()) + return; if (__get_cpu_var(wd_enabled) == 0) return; if (nmi_watchdog == NMI_LOCAL_APIC) @@ -287,6 +351,11 @@ void stop_apic_nmi_watchdog(void *unused) * * as these watchdog NMI IRQs are generated on every CPU, we only * have to check the current processor. + * + * since NMIs don't listen to _any_ locks, we have to be extremely + * careful not to rely on unsafe variables. The printk might lock + * up though, so we have to break up any console locks first ... + * [when there will be more tty-related locks, break them up here too!] */ static DEFINE_PER_CPU(unsigned, last_irq_sum); @@ -295,11 +364,11 @@ static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog(void) { - if (nmi_watchdog > 0) { + if (nmi_watchdog_active()) { unsigned cpu; /* - * Tell other CPUs to reset their alert counters. We cannot + * Tell other CPUs to reset their alert counters. We cannot * do it ourselves because the alert count increase is not * atomic. */ @@ -309,6 +378,9 @@ void touch_nmi_watchdog(void) } } + /* + * Tickle the softlockup detector too: + */ touch_softlockup_watchdog(); } EXPORT_SYMBOL(touch_nmi_watchdog); @@ -316,7 +388,12 @@ EXPORT_SYMBOL(touch_nmi_watchdog); notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { - int sum; + /* + * Since current_thread_info()-> is always on the stack, and we + * always switch the stack NMI-atomically, it's safe to use + * smp_processor_id(). + */ + unsigned int sum; int touched = 0; int cpu = smp_processor_id(); int rc = 0; @@ -328,7 +405,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs); + sum = get_timer_irqs(cpu); + if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; @@ -338,28 +416,29 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); + printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); dump_stack(); spin_unlock(&lock); cpu_clear(cpu, backtrace_mask); } -#ifdef CONFIG_X86_MCE - /* Could check oops_in_progress here too, but it's safer - not too */ - if (atomic_read(&mce_entry) > 0) + /* Could check oops_in_progress here too, but it's safer not to */ + if (mce_in_progress()) touched = 1; -#endif - /* if the apic timer isn't firing, this cpu isn't doing much */ + + /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, - panic_on_timeout); + if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) + /* + * die_nmi will return ONLY if NOTIFY_STOP happens.. + */ + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); @@ -373,7 +452,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) rc |= lapic_wd_event(nmi_hz); break; case NMI_IO_APIC: - /* don't know how to accurately check for this. + /* + * don't know how to accurately check for this. * just assume it was a watchdog timer interrupt * This matches the old behaviour. */ @@ -383,31 +463,14 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) return rc; } -static unsigned ignore_nmis; - -asmlinkage notrace __kprobes void -do_nmi(struct pt_regs *regs, long error_code) -{ - nmi_enter(); - add_pda(__nmi_count,1); - if (!ignore_nmis) - default_do_nmi(regs); - nmi_exit(); -} - -void stop_nmi(void) -{ - acpi_nmi_disable(); - ignore_nmis++; -} +#ifdef CONFIG_SYSCTL -void restart_nmi(void) +static int __init setup_unknown_nmi_panic(char *str) { - ignore_nmis--; - acpi_nmi_enable(); + unknown_nmi_panic = 1; + return 1; } - -#ifdef CONFIG_SYSCTL +__setup("unknown_nmi_panic", setup_unknown_nmi_panic); static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) { @@ -415,7 +478,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ + die_nmi(buf, regs, 1); /* Always panic here */ return 0; } @@ -433,28 +496,26 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, if (!!old_state == !!nmi_watchdog_enabled) return 0; - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) { + printk(KERN_WARNING + "NMI watchdog is permanently disabled\n"); return -EIO; } - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) enable_lapic_nmi_watchdog(); else disable_lapic_nmi_watchdog(); } else { - printk( KERN_WARNING + printk(KERN_WARNING "NMI watchdog doesn't know what hardware to touch\n"); return -EIO; } return 0; } -#endif +#endif /* CONFIG_SYSCTL */ int do_nmi_callback(struct pt_regs *regs, int cpu) { @@ -477,6 +538,3 @@ void __trigger_all_cpu_backtrace(void) mdelay(1); } } - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c deleted file mode 100644 index 84160f74eeb..00000000000 --- a/arch/x86/kernel/nmi_32.c +++ /dev/null @@ -1,467 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar <mingo@redhat.com> - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/nmi.h> -#include <linux/sysdev.h> -#include <linux/sysctl.h> -#include <linux/percpu.h> -#include <linux/kprobes.h> -#include <linux/cpumask.h> -#include <linux/kernel_stat.h> -#include <linux/kdebug.h> -#include <linux/slab.h> - -#include <asm/smp.h> -#include <asm/nmi.h> - -#include "mach_traps.h" - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -static int endflag __initdata = 0; - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - return -1; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = nmi_count(cpu); - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_possible_cpu(cpu) { -#ifdef CONFIG_SMP - /* Check cpu_callin_map here because that is set - after the timer is started. */ - if (!cpu_isset(cpu, cpu_callin_map)) - continue; -#endif - if (!per_cpu(wd_enabled, cpu)) - continue; - if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - return -1; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -} - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - - -/* Suspend/resume support */ - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */ - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] - */ - -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): - */ - for_each_present_cpu(cpu) { - if (alert_counter[cpu]) - alert_counter[cpu] = 0; - } - } - - /* - * Tickle the softlockup detector too: - */ - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -extern void die_nmi(struct pt_regs *, const char *msg); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - - /* - * Since current_thread_info()-> is always on the stack, and we - * always switch the stack NMI-atomically, it's safe to use - * smp_processor_id(). - */ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - /* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ - sum = per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; - - /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && last_irq_sums[cpu] == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) - /* - * die_nmi will return ONLY if NOTIFY_STOP happens.. - */ - die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); - } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; - } - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(regs, buf); - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - if (nmi_watchdog == NMI_DEFAULT) { - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; - } - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c index e65281b1634..4caff39078e 100644 --- a/arch/x86/kernel/numaq_32.c +++ b/arch/x86/kernel/numaq_32.c @@ -31,6 +31,9 @@ #include <asm/numaq.h> #include <asm/topology.h> #include <asm/processor.h> +#include <asm/mpspec.h> +#include <asm/e820.h> +#include <asm/setup.h> #define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) @@ -58,6 +61,8 @@ static void __init smp_dump_qct(void) node_end_pfn[node] = MB_TO_PAGES( eq->hi_shrd_mem_start + eq->hi_shrd_mem_size); + e820_register_active_regions(node, node_start_pfn[node], + node_end_pfn[node]); memory_present(node, node_start_pfn[node], node_end_pfn[node]); node_remap_size[node] = node_memmap_size_bytes(node, @@ -67,23 +72,216 @@ static void __init smp_dump_qct(void) } } -/* - * Unlike Summit, we don't really care to let the NUMA-Q - * fall back to flat mode. Don't compile for NUMA-Q - * unless you really need it! - */ -int __init get_memcfg_numaq(void) -{ - smp_dump_qct(); - return 1; -} -static int __init numaq_tsc_disable(void) +void __cpuinit numaq_tsc_disable(void) { + if (!found_numaq) + return; + if (num_online_nodes() > 1) { printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); setup_clear_cpu_cap(X86_FEATURE_TSC); } +} + +static int __init numaq_pre_time_init(void) +{ + numaq_tsc_disable(); return 0; } -arch_initcall(numaq_tsc_disable); + +int found_numaq; +/* + * Have to match translation table entries to main table entries by counter + * hence the mpc_record variable .... can't see a less disgusting way of + * doing this .... + */ +struct mpc_config_translation { + unsigned char mpc_type; + unsigned char trans_len; + unsigned char trans_type; + unsigned char trans_quad; + unsigned char trans_global; + unsigned char trans_local; + unsigned short trans_reserved; +}; + +/* x86_quirks member */ +static int mpc_record; +static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] + __cpuinitdata; + +static inline int generate_logical_apicid(int quad, int phys_apicid) +{ + return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1); +} + +/* x86_quirks member */ +static int mpc_apic_id(struct mpc_config_processor *m) +{ + int quad = translation_table[mpc_record]->trans_quad; + int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid); + + printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver, quad, logical_apicid); + return logical_apicid; +} + +int mp_bus_id_to_node[MAX_MP_BUSSES]; + +int mp_bus_id_to_local[MAX_MP_BUSSES]; + +/* x86_quirks member */ +static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name) +{ + int quad = translation_table[mpc_record]->trans_quad; + int local = translation_table[mpc_record]->trans_local; + + mp_bus_id_to_node[m->mpc_busid] = quad; + mp_bus_id_to_local[m->mpc_busid] = local; + printk(KERN_INFO "Bus #%d is %s (node %d)\n", + m->mpc_busid, name, quad); +} + +int quad_local_to_mp_bus_id [NR_CPUS/4][4]; + +/* x86_quirks member */ +static void mpc_oem_pci_bus(struct mpc_config_bus *m) +{ + int quad = translation_table[mpc_record]->trans_quad; + int local = translation_table[mpc_record]->trans_local; + + quad_local_to_mp_bus_id[quad][local] = m->mpc_busid; +} + +static void __init MP_translation_info(struct mpc_config_translation *m) +{ + printk(KERN_INFO + "Translation: record %d, type %d, quad %d, global %d, local %d\n", + mpc_record, m->trans_type, m->trans_quad, m->trans_global, + m->trans_local); + + if (mpc_record >= MAX_MPC_ENTRY) + printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); + else + translation_table[mpc_record] = m; /* stash this for later */ + if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) + node_set_online(m->trans_quad); +} + +static int __init mpf_checksum(unsigned char *mp, int len) +{ + int sum = 0; + + while (len--) + sum += *mp++; + + return sum & 0xFF; +} + +/* + * Read/parse the MPC oem tables + */ + +static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, + unsigned short oemsize) +{ + int count = sizeof(*oemtable); /* the header size */ + unsigned char *oemptr = ((unsigned char *)oemtable) + count; + + mpc_record = 0; + printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", + oemtable); + if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) { + printk(KERN_WARNING + "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", + oemtable->oem_signature[0], oemtable->oem_signature[1], + oemtable->oem_signature[2], oemtable->oem_signature[3]); + return; + } + if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) { + printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); + return; + } + while (count < oemtable->oem_length) { + switch (*oemptr) { + case MP_TRANSLATION: + { + struct mpc_config_translation *m = + (struct mpc_config_translation *)oemptr; + MP_translation_info(m); + oemptr += sizeof(*m); + count += sizeof(*m); + ++mpc_record; + break; + } + default: + { + printk(KERN_WARNING + "Unrecognised OEM table entry type! - %d\n", + (int)*oemptr); + return; + } + } + } +} + +static int __init numaq_setup_ioapic_ids(void) +{ + /* so can skip it */ + return 1; +} + +static struct x86_quirks numaq_x86_quirks __initdata = { + .arch_pre_time_init = numaq_pre_time_init, + .arch_time_init = NULL, + .arch_pre_intr_init = NULL, + .arch_memory_setup = NULL, + .arch_intr_init = NULL, + .arch_trap_init = NULL, + .mach_get_smp_config = NULL, + .mach_find_smp_config = NULL, + .mpc_record = &mpc_record, + .mpc_apic_id = mpc_apic_id, + .mpc_oem_bus_info = mpc_oem_bus_info, + .mpc_oem_pci_bus = mpc_oem_pci_bus, + .smp_read_mpc_oem = smp_read_mpc_oem, + .setup_ioapic_ids = numaq_setup_ioapic_ids, +}; + +void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (strncmp(oem, "IBM NUMA", 8)) + printk("Warning! Not a NUMA-Q system!\n"); + else + found_numaq = 1; +} + +static __init void early_check_numaq(void) +{ + /* + * Find possible boot-time SMP configuration: + */ + early_find_smp_config(); + /* + * get boot-time SMP configuration: + */ + if (smp_found_config) + early_get_smp_config(); + + if (found_numaq) + x86_quirks = &numaq_x86_quirks; +} + +int __init get_memcfg_numaq(void) +{ + early_check_numaq(); + if (!found_numaq) + return 0; + smp_dump_qct(); + return 1; +} diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c index 3e667227480..7a13fac63a1 100644 --- a/arch/x86/kernel/olpc.c +++ b/arch/x86/kernel/olpc.c @@ -190,12 +190,12 @@ EXPORT_SYMBOL_GPL(olpc_ec_cmd); static void __init platform_detect(void) { size_t propsize; - u32 rev; + __be32 rev; if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4, &propsize) || propsize != 4) { printk(KERN_ERR "ofw: getprop call failed!\n"); - rev = 0; + rev = cpu_to_be32(0); } olpc_platform_info.boardrev = be32_to_cpu(rev); } @@ -203,7 +203,7 @@ static void __init platform_detect(void) static void __init platform_detect(void) { /* stopgap until OFW support is added to the kernel */ - olpc_platform_info.boardrev = be32_to_cpu(0xc2); + olpc_platform_info.boardrev = 0xc2; } #endif diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c new file mode 100644 index 00000000000..0e9f1982b1d --- /dev/null +++ b/arch/x86/kernel/paravirt-spinlocks.c @@ -0,0 +1,37 @@ +/* + * Split spinlock implementation out into its own file, so it can be + * compiled in a FTRACE-compatible way. + */ +#include <linux/spinlock.h> +#include <linux/module.h> + +#include <asm/paravirt.h> + +static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags) +{ + __raw_spin_lock(lock); +} + +struct pv_lock_ops pv_lock_ops = { +#ifdef CONFIG_SMP + .spin_is_locked = __ticket_spin_is_locked, + .spin_is_contended = __ticket_spin_is_contended, + + .spin_lock = __ticket_spin_lock, + .spin_lock_flags = default_spin_lock_flags, + .spin_trylock = __ticket_spin_trylock, + .spin_unlock = __ticket_spin_unlock, +#endif +}; +EXPORT_SYMBOL(pv_lock_ops); + +void __init paravirt_use_bytelocks(void) +{ +#ifdef CONFIG_SMP + pv_lock_ops.spin_is_locked = __byte_spin_is_locked; + pv_lock_ops.spin_is_contended = __byte_spin_is_contended; + pv_lock_ops.spin_lock = __byte_spin_lock; + pv_lock_ops.spin_trylock = __byte_spin_trylock; + pv_lock_ops.spin_unlock = __byte_spin_unlock; +#endif +} diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5ea2a0..e4c8fb60887 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -29,7 +29,9 @@ #include <asm/desc.h> #include <asm/setup.h> #include <asm/arch_hooks.h> +#include <asm/pgtable.h> #include <asm/time.h> +#include <asm/pgalloc.h> #include <asm/irq.h> #include <asm/delay.h> #include <asm/fixmap.h> @@ -122,6 +124,7 @@ static void *get_call_destination(u8 type) .pv_irq_ops = pv_irq_ops, .pv_apic_ops = pv_apic_ops, .pv_mmu_ops = pv_mmu_ops, + .pv_lock_ops = pv_lock_ops, }; return *((void **)&tmpl + type); } @@ -139,7 +142,9 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf, /* If the operation is a nop, then nop the callsite */ ret = paravirt_patch_nop(); else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) || - type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret)) + type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) || + type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) || + type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret64)) /* If operation requires a jmp, then jmp */ ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len); else @@ -190,7 +195,9 @@ static void native_flush_tlb_single(unsigned long addr) /* These are in entry.S */ extern void native_iret(void); -extern void native_irq_enable_syscall_ret(void); +extern void native_irq_enable_sysexit(void); +extern void native_usergs_sysret32(void); +extern void native_usergs_sysret64(void); static int __init print_banner(void) { @@ -280,7 +287,7 @@ struct pv_time_ops pv_time_ops = { .get_wallclock = native_get_wallclock, .set_wallclock = native_set_wallclock, .sched_clock = native_sched_clock, - .get_cpu_khz = native_calculate_cpu_khz, + .get_tsc_khz = native_calibrate_tsc, }; struct pv_irq_ops pv_irq_ops = { @@ -291,6 +298,9 @@ struct pv_irq_ops pv_irq_ops = { .irq_enable = native_irq_enable, .safe_halt = native_safe_halt, .halt = native_halt, +#ifdef CONFIG_X86_64 + .adjust_exception_frame = paravirt_nop, +#endif }; struct pv_cpu_ops pv_cpu_ops = { @@ -309,6 +319,7 @@ struct pv_cpu_ops pv_cpu_ops = { #endif .wbinvd = native_wbinvd, .read_msr = native_read_msr_safe, + .read_msr_amd = native_read_msr_amd_safe, .write_msr = native_write_msr_safe, .read_tsc = native_read_tsc, .read_pmc = native_read_pmc, @@ -321,12 +332,27 @@ struct pv_cpu_ops pv_cpu_ops = { .store_idt = native_store_idt, .store_tr = native_store_tr, .load_tls = native_load_tls, +#ifdef CONFIG_X86_64 + .load_gs_index = native_load_gs_index, +#endif .write_ldt_entry = native_write_ldt_entry, .write_gdt_entry = native_write_gdt_entry, .write_idt_entry = native_write_idt_entry, + + .alloc_ldt = paravirt_nop, + .free_ldt = paravirt_nop, + .load_sp0 = native_load_sp0, - .irq_enable_syscall_ret = native_irq_enable_syscall_ret, +#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION) + .irq_enable_sysexit = native_irq_enable_sysexit, +#endif +#ifdef CONFIG_X86_64 +#ifdef CONFIG_IA32_EMULATION + .usergs_sysret32 = native_usergs_sysret32, +#endif + .usergs_sysret64 = native_usergs_sysret64, +#endif .iret = native_iret, .swapgs = native_swapgs, @@ -341,9 +367,6 @@ struct pv_cpu_ops pv_cpu_ops = { struct pv_apic_ops pv_apic_ops = { #ifdef CONFIG_X86_LOCAL_APIC - .apic_write = native_apic_write, - .apic_write_atomic = native_apic_write_atomic, - .apic_read = native_apic_read, .setup_boot_clock = setup_boot_APIC_clock, .setup_secondary_clock = setup_secondary_APIC_clock, .startup_ipi_hook = paravirt_nop, @@ -354,6 +377,9 @@ struct pv_mmu_ops pv_mmu_ops = { #ifndef CONFIG_X86_64 .pagetable_setup_start = native_pagetable_setup_start, .pagetable_setup_done = native_pagetable_setup_done, +#else + .pagetable_setup_start = paravirt_nop, + .pagetable_setup_done = paravirt_nop, #endif .read_cr2 = native_read_cr2, @@ -366,6 +392,9 @@ struct pv_mmu_ops pv_mmu_ops = { .flush_tlb_single = native_flush_tlb_single, .flush_tlb_others = native_flush_tlb_others, + .pgd_alloc = __paravirt_pgd_alloc, + .pgd_free = paravirt_nop, + .alloc_pte = paravirt_nop, .alloc_pmd = paravirt_nop, .alloc_pmd_clone = paravirt_nop, @@ -380,6 +409,9 @@ struct pv_mmu_ops pv_mmu_ops = { .pte_update = paravirt_nop, .pte_update_defer = paravirt_nop, + .ptep_modify_prot_start = __ptep_modify_prot_start, + .ptep_modify_prot_commit = __ptep_modify_prot_commit, + #ifdef CONFIG_HIGHPTE .kmap_atomic_pte = kmap_atomic, #endif @@ -403,6 +435,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_flags, .pgd_val = native_pgd_val, .make_pte = native_make_pte, @@ -416,6 +449,8 @@ struct pv_mmu_ops pv_mmu_ops = { .enter = paravirt_nop, .leave = paravirt_nop, }, + + .set_fixmap = native_set_fixmap, }; EXPORT_SYMBOL_GPL(pv_time_ops); diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c index 82fc5fcab4f..9fe644f4861 100644 --- a/arch/x86/kernel/paravirt_patch_32.c +++ b/arch/x86/kernel/paravirt_patch_32.c @@ -5,7 +5,7 @@ DEF_NATIVE(pv_irq_ops, irq_enable, "sti"); DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf"); DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax"); DEF_NATIVE(pv_cpu_ops, iret, "iret"); -DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit"); +DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "sti; sysexit"); DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax"); DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3"); DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax"); @@ -23,13 +23,13 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf, start = start_##ops##_##x; \ end = end_##ops##_##x; \ goto patch_site - switch(type) { + switch (type) { PATCH_SITE(pv_irq_ops, irq_disable); PATCH_SITE(pv_irq_ops, irq_enable); PATCH_SITE(pv_irq_ops, restore_fl); PATCH_SITE(pv_irq_ops, save_fl); PATCH_SITE(pv_cpu_ops, iret); - PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret); + PATCH_SITE(pv_cpu_ops, irq_enable_sysexit); PATCH_SITE(pv_mmu_ops, read_cr2); PATCH_SITE(pv_mmu_ops, read_cr3); PATCH_SITE(pv_mmu_ops, write_cr3); diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c index 7d904e138d7..061d01df9ae 100644 --- a/arch/x86/kernel/paravirt_patch_64.c +++ b/arch/x86/kernel/paravirt_patch_64.c @@ -14,8 +14,9 @@ DEF_NATIVE(pv_mmu_ops, flush_tlb_single, "invlpg (%rdi)"); DEF_NATIVE(pv_cpu_ops, clts, "clts"); DEF_NATIVE(pv_cpu_ops, wbinvd, "wbinvd"); -/* the three commands give us more control to how to return from a syscall */ -DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "movq %gs:" __stringify(pda_oldrsp) ", %rsp; swapgs; sysretq;"); +DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "swapgs; sti; sysexit"); +DEF_NATIVE(pv_cpu_ops, usergs_sysret64, "swapgs; sysretq"); +DEF_NATIVE(pv_cpu_ops, usergs_sysret32, "swapgs; sysretl"); DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs"); unsigned native_patch(u8 type, u16 clobbers, void *ibuf, @@ -35,7 +36,9 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf, PATCH_SITE(pv_irq_ops, irq_enable); PATCH_SITE(pv_irq_ops, irq_disable); PATCH_SITE(pv_cpu_ops, iret); - PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret); + PATCH_SITE(pv_cpu_ops, irq_enable_sysexit); + PATCH_SITE(pv_cpu_ops, usergs_sysret32); + PATCH_SITE(pv_cpu_ops, usergs_sysret64); PATCH_SITE(pv_cpu_ops, swapgs); PATCH_SITE(pv_mmu_ops, read_cr2); PATCH_SITE(pv_mmu_ops, read_cr3); diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index e28ec497e14..080d1d27f37 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -29,6 +29,7 @@ #include <linux/mm.h> #include <linux/spinlock.h> #include <linux/string.h> +#include <linux/crash_dump.h> #include <linux/dma-mapping.h> #include <linux/bitops.h> #include <linux/pci_ids.h> @@ -36,7 +37,8 @@ #include <linux/delay.h> #include <linux/scatterlist.h> #include <linux/iommu-helper.h> -#include <asm/gart.h> + +#include <asm/iommu.h> #include <asm/calgary.h> #include <asm/tce.h> #include <asm/pci-direct.h> @@ -167,6 +169,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl); static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); static void calioc2_tce_cache_blast(struct iommu_table *tbl); static void calioc2_dump_error_regs(struct iommu_table *tbl); +static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl); +static void get_tce_space_from_tar(void); static struct cal_chipset_ops calgary_chip_ops = { .handle_quirks = calgary_handle_quirks, @@ -257,7 +261,7 @@ static void iommu_range_reserve(struct iommu_table *tbl, badbit, tbl, start_addr, npages); } - set_bit_string(tbl->it_map, index, npages); + iommu_area_reserve(tbl->it_map, index, npages); spin_unlock_irqrestore(&tbl->it_lock, flags); } @@ -339,9 +343,8 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, /* were we called with bad_dma_address? */ badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE); if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) { - printk(KERN_ERR "Calgary: driver tried unmapping bad DMA " + WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA " "address 0x%Lx\n", dma_addr); - WARN_ON(1); return; } @@ -410,22 +413,6 @@ static void calgary_unmap_sg(struct device *dev, } } -static int calgary_nontranslate_map_sg(struct device* dev, - struct scatterlist *sg, int nelems, int direction) -{ - struct scatterlist *s; - int i; - - for_each_sg(sg, s, nelems, i) { - struct page *p = sg_page(s); - - BUG_ON(!p); - s->dma_address = virt_to_bus(sg_virt(s)); - s->dma_length = s->length; - } - return nelems; -} - static int calgary_map_sg(struct device *dev, struct scatterlist *sg, int nelems, int direction) { @@ -436,9 +423,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg, unsigned long entry; int i; - if (!translation_enabled(tbl)) - return calgary_nontranslate_map_sg(dev, sg, nelems, direction); - for_each_sg(sg, s, nelems, i) { BUG_ON(!sg_page(s)); @@ -474,7 +458,6 @@ error: static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr, size_t size, int direction) { - dma_addr_t dma_handle = bad_dma_address; void *vaddr = phys_to_virt(paddr); unsigned long uaddr; unsigned int npages; @@ -483,12 +466,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr, uaddr = (unsigned long)vaddr; npages = num_dma_pages(uaddr, size); - if (translation_enabled(tbl)) - dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction); - else - dma_handle = virt_to_bus(vaddr); - - return dma_handle; + return iommu_alloc(dev, tbl, vaddr, npages, direction); } static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, @@ -497,9 +475,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, struct iommu_table *tbl = find_iommu_table(dev); unsigned int npages; - if (!translation_enabled(tbl)) - return; - npages = num_dma_pages(dma_handle, size); iommu_free(tbl, dma_handle, npages); } @@ -516,24 +491,20 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size, npages = size >> PAGE_SHIFT; order = get_order(size); + flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); + /* alloc enough pages (and possibly more) */ ret = (void *)__get_free_pages(flag, order); if (!ret) goto error; memset(ret, 0, size); - if (translation_enabled(tbl)) { - /* set up tces to cover the allocated range */ - mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL); - if (mapping == bad_dma_address) - goto free; - - *dma_handle = mapping; - } else /* non translated slot */ - *dma_handle = virt_to_bus(ret); - + /* set up tces to cover the allocated range */ + mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL); + if (mapping == bad_dma_address) + goto free; + *dma_handle = mapping; return ret; - free: free_pages((unsigned long)ret, get_order(size)); ret = NULL; @@ -541,8 +512,22 @@ error: return ret; } -static const struct dma_mapping_ops calgary_dma_ops = { +static void calgary_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + unsigned int npages; + struct iommu_table *tbl = find_iommu_table(dev); + + size = PAGE_ALIGN(size); + npages = size >> PAGE_SHIFT; + + iommu_free(tbl, dma_handle, npages); + free_pages((unsigned long)vaddr, get_order(size)); +} + +static struct dma_mapping_ops calgary_dma_ops = { .alloc_coherent = calgary_alloc_coherent, + .free_coherent = calgary_free_coherent, .map_single = calgary_map_single, .unmap_single = calgary_unmap_single, .map_sg = calgary_map_sg, @@ -830,7 +815,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) tbl = pci_iommu(dev->bus); tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space; - tce_free(tbl, 0, tbl->it_size); + + if (is_kdump_kernel()) + calgary_init_bitmap_from_tce_table(tbl); + else + tce_free(tbl, 0, tbl->it_size); if (is_calgary(dev->device)) tbl->chip_ops = &calgary_chip_ops; @@ -1209,6 +1198,10 @@ static int __init calgary_init(void) if (ret) return ret; + /* Purely for kdump kernel case */ + if (is_kdump_kernel()) + get_tce_space_from_tar(); + do { dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev); if (!dev) @@ -1230,6 +1223,16 @@ static int __init calgary_init(void) goto error; } while (1); + dev = NULL; + for_each_pci_dev(dev) { + struct iommu_table *tbl; + + tbl = find_iommu_table(&dev->dev); + + if (translation_enabled(tbl)) + dev->dev.archdata.dma_ops = &calgary_dma_ops; + } + return ret; error: @@ -1251,6 +1254,7 @@ error: calgary_disable_translation(dev); calgary_free_bus(dev); pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ + dev->dev.archdata.dma_ops = NULL; } while (1); return ret; @@ -1280,13 +1284,15 @@ static inline int __init determine_tce_table_size(u64 ram) static int __init build_detail_arrays(void) { unsigned long ptr; - int i, scal_detail_size, rio_detail_size; + unsigned numnodes, i; + int scal_detail_size, rio_detail_size; - if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){ + numnodes = rio_table_hdr->num_scal_dev; + if (numnodes > MAX_NUMNODES){ printk(KERN_WARNING "Calgary: MAX_NUMNODES too low! Defined as %d, " "but system has %d nodes.\n", - MAX_NUMNODES, rio_table_hdr->num_scal_dev); + MAX_NUMNODES, numnodes); return -ENODEV; } @@ -1307,8 +1313,7 @@ static int __init build_detail_arrays(void) } ptr = ((unsigned long)rio_table_hdr) + 3; - for (i = 0; i < rio_table_hdr->num_scal_dev; - i++, ptr += scal_detail_size) + for (i = 0; i < numnodes; i++, ptr += scal_detail_size) scal_devs[i] = (struct scal_detail *)ptr; for (i = 0; i < rio_table_hdr->num_rio_dev; @@ -1339,6 +1344,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) return (val != 0xffffffff); } +/* + * calgary_init_bitmap_from_tce_table(): + * Funtion for kdump case. In the second/kdump kernel initialize + * the bitmap based on the tce table entries obtained from first kernel + */ +static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl) +{ + u64 *tp; + unsigned int index; + tp = ((u64 *)tbl->it_base); + for (index = 0 ; index < tbl->it_size; index++) { + if (*tp != 0x0) + set_bit(index, tbl->it_map); + tp++; + } +} + +/* + * get_tce_space_from_tar(): + * Function for kdump case. Get the tce tables from first kernel + * by reading the contents of the base adress register of calgary iommu + */ +static void __init get_tce_space_from_tar(void) +{ + int bus; + void __iomem *target; + unsigned long tce_space; + + for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) { + struct calgary_bus_info *info = &bus_info[bus]; + unsigned short pci_device; + u32 val; + + val = read_pci_config(bus, 0, 0, 0); + pci_device = (val & 0xFFFF0000) >> 16; + + if (!is_cal_pci_dev(pci_device)) + continue; + if (info->translation_disabled) + continue; + + if (calgary_bus_has_devices(bus, pci_device) || + translate_empty_slots) { + target = calgary_reg(bus_info[bus].bbar, + tar_offset(bus)); + tce_space = be64_to_cpu(readq(target)); + tce_space = tce_space & TAR_SW_BITS; + + tce_space = tce_space & (~specified_table_size); + info->tce_space = (u64 *)__va(tce_space); + } + } + return; +} + void __init detect_calgary(void) { int bus; @@ -1394,7 +1454,8 @@ void __init detect_calgary(void) return; } - specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE); + specified_table_size = determine_tce_table_size((is_kdump_kernel() ? + saved_max_pfn : max_pfn) * PAGE_SIZE); for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) { struct calgary_bus_info *info = &bus_info[bus]; @@ -1412,10 +1473,16 @@ void __init detect_calgary(void) if (calgary_bus_has_devices(bus, pci_device) || translate_empty_slots) { - tbl = alloc_tce_table(); - if (!tbl) - goto cleanup; - info->tce_space = tbl; + /* + * If it is kdump kernel, find and use tce tables + * from first kernel, else allocate tce tables here + */ + if (!is_kdump_kernel()) { + tbl = alloc_tce_table(); + if (!tbl) + goto cleanup; + info->tce_space = tbl; + } calgary_found = 1; } } @@ -1430,6 +1497,10 @@ void __init detect_calgary(void) printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, debugging ? "enabled" : "disabled"); + + /* swiotlb for devices that aren't behind the Calgary. */ + if (max_pfn > MAX_DMA32_PFN) + swiotlb = 1; } return; @@ -1446,7 +1517,7 @@ int __init calgary_iommu_init(void) { int ret; - if (no_iommu || swiotlb) + if (no_iommu || (swiotlb && !calgary_detected)) return -ENODEV; if (!calgary_detected) @@ -1459,15 +1530,14 @@ int __init calgary_iommu_init(void) if (ret) { printk(KERN_ERR "PCI-DMA: Calgary init failed %d, " "falling back to no_iommu\n", ret); - if (end_pfn > MAX_DMA32_PFN) - printk(KERN_ERR "WARNING more than 4GB of memory, " - "32bit PCI may malfunction.\n"); return ret; } force_iommu = 1; bad_dma_address = 0x0; - dma_ops = &calgary_dma_ops; + /* dma_ops is set to swiotlb or nommu */ + if (!dma_ops) + dma_ops = &nommu_dma_ops; return 0; } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index dc00a1331ac..0a3824e837b 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -5,13 +5,13 @@ #include <asm/proto.h> #include <asm/dma.h> -#include <asm/gart.h> +#include <asm/iommu.h> #include <asm/calgary.h> +#include <asm/amd_iommu.h> -int forbid_dac __read_mostly; -EXPORT_SYMBOL(forbid_dac); +static int forbid_dac __read_mostly; -const struct dma_mapping_ops *dma_ops; +struct dma_mapping_ops *dma_ops; EXPORT_SYMBOL(dma_ops); static int iommu_sac_force __read_mostly; @@ -41,11 +41,12 @@ EXPORT_SYMBOL(bad_dma_address); /* Dummy device used for NULL arguments (normally ISA). Better would be probably a smaller DMA mask, but this is bug-to-bug compatible to older i386. */ -struct device fallback_dev = { +struct device x86_dma_fallback_dev = { .bus_id = "fallback device", .coherent_dma_mask = DMA_32BIT_MASK, - .dma_mask = &fallback_dev.coherent_dma_mask, + .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask, }; +EXPORT_SYMBOL(x86_dma_fallback_dev); int dma_set_mask(struct device *dev, u64 mask) { @@ -74,13 +75,17 @@ early_param("dma32_size", parse_dma32_size_opt); void __init dma32_reserve_bootmem(void) { unsigned long size, align; - if (end_pfn <= MAX_DMA32_PFN) + if (max_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; - size = round_up(dma32_bootmem_size, align); + size = roundup(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else @@ -88,17 +93,14 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; - if (end_pfn <= MAX_DMA32_PFN) + if (max_pfn <= MAX_DMA32_PFN) return; if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; @@ -112,22 +114,57 @@ void __init pci_iommu_alloc(void) * The order of these functions is important for * fall-back/fail-over reasons */ -#ifdef CONFIG_GART_IOMMU gart_iommu_hole_init(); -#endif -#ifdef CONFIG_CALGARY_IOMMU detect_calgary(); -#endif detect_intel_iommu(); -#ifdef CONFIG_SWIOTLB + amd_iommu_detect(); + pci_swiotlb_init(); -#endif } + +unsigned long iommu_num_pages(unsigned long addr, unsigned long len) +{ + unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE); + + return size >> PAGE_SHIFT; +} +EXPORT_SYMBOL(iommu_num_pages); #endif +void *dma_generic_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_addr, gfp_t flag) +{ + unsigned long dma_mask; + struct page *page; + dma_addr_t addr; + + dma_mask = dma_alloc_coherent_mask(dev, flag); + + flag |= __GFP_ZERO; +again: + page = alloc_pages_node(dev_to_node(dev), flag, get_order(size)); + if (!page) + return NULL; + + addr = page_to_phys(page); + if (!is_buffer_dma_capable(dma_mask, addr, size)) { + __free_pages(page, get_order(size)); + + if (dma_mask < DMA_32BIT_MASK && !(flag & GFP_DMA)) { + flag = (flag & ~GFP_DMA32) | GFP_DMA; + goto again; + } + + return NULL; + } + + *dma_addr = addr; + return page_address(page); +} + /* * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter * documentation. @@ -180,9 +217,7 @@ static __init int iommu_setup(char *p) swiotlb = 1; #endif -#ifdef CONFIG_GART_IOMMU gart_parse_options(p); -#endif #ifdef CONFIG_CALGARY_IOMMU if (!strncmp(p, "calgary", 7)) @@ -197,136 +232,19 @@ static __init int iommu_setup(char *p) } early_param("iommu", iommu_setup); -#ifdef CONFIG_X86_32 -int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags) -{ - void __iomem *mem_base = NULL; - int pages = size >> PAGE_SHIFT; - int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long); - - if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) - goto out; - if (!size) - goto out; - if (dev->dma_mem) - goto out; - - /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ - - mem_base = ioremap(bus_addr, size); - if (!mem_base) - goto out; - - dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); - if (!dev->dma_mem) - goto out; - dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); - if (!dev->dma_mem->bitmap) - goto free1_out; - - dev->dma_mem->virt_base = mem_base; - dev->dma_mem->device_base = device_addr; - dev->dma_mem->size = pages; - dev->dma_mem->flags = flags; - - if (flags & DMA_MEMORY_MAP) - return DMA_MEMORY_MAP; - - return DMA_MEMORY_IO; - - free1_out: - kfree(dev->dma_mem); - out: - if (mem_base) - iounmap(mem_base); - return 0; -} -EXPORT_SYMBOL(dma_declare_coherent_memory); - -void dma_release_declared_memory(struct device *dev) -{ - struct dma_coherent_mem *mem = dev->dma_mem; - - if (!mem) - return; - dev->dma_mem = NULL; - iounmap(mem->virt_base); - kfree(mem->bitmap); - kfree(mem); -} -EXPORT_SYMBOL(dma_release_declared_memory); - -void *dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size) -{ - struct dma_coherent_mem *mem = dev->dma_mem; - int pos, err; - int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1); - - pages >>= PAGE_SHIFT; - - if (!mem) - return ERR_PTR(-EINVAL); - - pos = (device_addr - mem->device_base) >> PAGE_SHIFT; - err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); - if (err != 0) - return ERR_PTR(err); - return mem->virt_base + (pos << PAGE_SHIFT); -} -EXPORT_SYMBOL(dma_mark_declared_memory_occupied); - -static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size, - dma_addr_t *dma_handle, void **ret) -{ - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - int order = get_order(size); - - if (mem) { - int page = bitmap_find_free_region(mem->bitmap, mem->size, - order); - if (page >= 0) { - *dma_handle = mem->device_base + (page << PAGE_SHIFT); - *ret = mem->virt_base + (page << PAGE_SHIFT); - memset(*ret, 0, size); - } - if (mem->flags & DMA_MEMORY_EXCLUSIVE) - *ret = NULL; - } - return (mem != NULL); -} - -static int dma_release_coherent(struct device *dev, int order, void *vaddr) -{ - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - - if (mem && vaddr >= mem->virt_base && vaddr < - (mem->virt_base + (mem->size << PAGE_SHIFT))) { - int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; - - bitmap_release_region(mem->bitmap, page, order); - return 1; - } - return 0; -} -#else -#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0) -#define dma_release_coherent(dev, order, vaddr) (0) -#endif /* CONFIG_X86_32 */ - int dma_supported(struct device *dev, u64 mask) { + struct dma_mapping_ops *ops = get_dma_ops(dev); + #ifdef CONFIG_PCI if (mask > 0xffffffff && forbid_dac > 0) { - printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", - dev->bus_id); + dev_info(dev, "PCI: Disallowing DAC for device\n"); return 0; } #endif - if (dma_ops->dma_supported) - return dma_ops->dma_supported(dev, mask); + if (ops->dma_supported) + return ops->dma_supported(dev, mask); /* Copied from i386. Doesn't make much sense, because it will only work for pci_alloc_coherent. @@ -347,8 +265,7 @@ int dma_supported(struct device *dev, u64 mask) type. Normally this doesn't make any difference, but gives more gentle handling of IOMMU overflow. */ if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { - printk(KERN_INFO "%s: Force SAC with mask %Lx\n", - dev->bus_id, mask); + dev_info(dev, "Force SAC with mask %Lx\n", mask); return 0; } @@ -356,155 +273,15 @@ int dma_supported(struct device *dev, u64 mask) } EXPORT_SYMBOL(dma_supported); -/* Allocate DMA memory on node near device */ -noinline struct page * -dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) -{ - int node; - - node = dev_to_node(dev); - - return alloc_pages_node(node, gfp, order); -} - -/* - * Allocate memory for a coherent mapping. - */ -void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - gfp_t gfp) -{ - void *memory = NULL; - struct page *page; - unsigned long dma_mask = 0; - dma_addr_t bus; - int noretry = 0; - - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); - - if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory)) - return memory; - - if (!dev) { - dev = &fallback_dev; - gfp |= GFP_DMA; - } - dma_mask = dev->coherent_dma_mask; - if (dma_mask == 0) - dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK; - - /* Device not DMA able */ - if (dev->dma_mask == NULL) - return NULL; - - /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ - if (gfp & __GFP_DMA) - noretry = 1; - -#ifdef CONFIG_X86_64 - /* Why <=? Even when the mask is smaller than 4GB it is often - larger than 16MB and in this case we have a chance of - finding fitting memory in the next higher zone first. If - not retry with true GFP_DMA. -AK */ - if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) { - gfp |= GFP_DMA32; - if (dma_mask < DMA_32BIT_MASK) - noretry = 1; - } -#endif - - again: - page = dma_alloc_pages(dev, - noretry ? gfp | __GFP_NORETRY : gfp, get_order(size)); - if (page == NULL) - return NULL; - - { - int high, mmu; - bus = page_to_phys(page); - memory = page_address(page); - high = (bus + size) >= dma_mask; - mmu = high; - if (force_iommu && !(gfp & GFP_DMA)) - mmu = 1; - else if (high) { - free_pages((unsigned long)memory, - get_order(size)); - - /* Don't use the 16MB ZONE_DMA unless absolutely - needed. It's better to use remapping first. */ - if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) { - gfp = (gfp & ~GFP_DMA32) | GFP_DMA; - goto again; - } - - /* Let low level make its own zone decisions */ - gfp &= ~(GFP_DMA32|GFP_DMA); - - if (dma_ops->alloc_coherent) - return dma_ops->alloc_coherent(dev, size, - dma_handle, gfp); - return NULL; - } - - memset(memory, 0, size); - if (!mmu) { - *dma_handle = bus; - return memory; - } - } - - if (dma_ops->alloc_coherent) { - free_pages((unsigned long)memory, get_order(size)); - gfp &= ~(GFP_DMA|GFP_DMA32); - return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); - } - - if (dma_ops->map_simple) { - *dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory), - size, - PCI_DMA_BIDIRECTIONAL); - if (*dma_handle != bad_dma_address) - return memory; - } - - if (panic_on_overflow) - panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n", - (unsigned long)size); - free_pages((unsigned long)memory, get_order(size)); - return NULL; -} -EXPORT_SYMBOL(dma_alloc_coherent); - -/* - * Unmap coherent memory. - * The caller must ensure that the device has finished accessing the mapping. - */ -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t bus) -{ - int order = get_order(size); - WARN_ON(irqs_disabled()); /* for portability */ - if (dma_release_coherent(dev, order, vaddr)) - return; - if (dma_ops->unmap_single) - dma_ops->unmap_single(dev, bus, size, 0); - free_pages((unsigned long)vaddr, order); -} -EXPORT_SYMBOL(dma_free_coherent); - static int __init pci_iommu_init(void) { -#ifdef CONFIG_CALGARY_IOMMU calgary_iommu_init(); -#endif intel_iommu_init(); -#ifdef CONFIG_GART_IOMMU + amd_iommu_init(); + gart_iommu_init(); -#endif no_iommu_init(); return 0; diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index aa8ec928caa..145f1c83369 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -27,11 +27,12 @@ #include <linux/scatterlist.h> #include <linux/iommu-helper.h> #include <linux/sysdev.h> +#include <linux/io.h> #include <asm/atomic.h> -#include <asm/io.h> #include <asm/mtrr.h> #include <asm/pgtable.h> #include <asm/proto.h> +#include <asm/iommu.h> #include <asm/gart.h> #include <asm/cacheflush.h> #include <asm/swiotlb.h> @@ -66,9 +67,6 @@ static u32 gart_unmapped_entry; (((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT) #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28)) -#define to_pages(addr, size) \ - (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT) - #define EMERGENCY_PAGES 32 /* = 128KB */ #ifdef CONFIG_AGP @@ -82,9 +80,10 @@ AGPEXTERN int agp_memory_reserved; AGPEXTERN __u32 *agp_gatt_table; static unsigned long next_bit; /* protected by iommu_bitmap_lock */ -static int need_flush; /* global flush state. set for each gart wrap */ +static bool need_flush; /* global flush state. set for each gart wrap */ -static unsigned long alloc_iommu(struct device *dev, int size) +static unsigned long alloc_iommu(struct device *dev, int size, + unsigned long align_mask) { unsigned long offset, flags; unsigned long boundary_size; @@ -92,27 +91,27 @@ static unsigned long alloc_iommu(struct device *dev, int size) base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev), PAGE_SIZE) >> PAGE_SHIFT; - boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, + boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1, PAGE_SIZE) >> PAGE_SHIFT; spin_lock_irqsave(&iommu_bitmap_lock, flags); offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, next_bit, - size, base_index, boundary_size, 0); + size, base_index, boundary_size, align_mask); if (offset == -1) { - need_flush = 1; + need_flush = true; offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, 0, - size, base_index, boundary_size, 0); + size, base_index, boundary_size, + align_mask); } if (offset != -1) { - set_bit_string(iommu_gart_bitmap, offset, size); next_bit = offset+size; if (next_bit >= iommu_pages) { next_bit = 0; - need_flush = 1; + need_flush = true; } } if (iommu_fullflush) - need_flush = 1; + need_flush = true; spin_unlock_irqrestore(&iommu_bitmap_lock, flags); return offset; @@ -137,7 +136,7 @@ static void flush_gart(void) spin_lock_irqsave(&iommu_bitmap_lock, flags); if (need_flush) { k8_flush_garts(); - need_flush = 0; + need_flush = false; } spin_unlock_irqrestore(&iommu_bitmap_lock, flags); } @@ -176,7 +175,8 @@ static void dump_leak(void) iommu_leak_pages); for (i = 0; i < iommu_leak_pages; i += 2) { printk(KERN_DEBUG "%lu: ", iommu_pages-i); - printk_address((unsigned long) iommu_leak_tab[iommu_pages-i], 0); + printk_address((unsigned long) iommu_leak_tab[iommu_pages-i], + 0); printk(KERN_CONT "%c", (i+1)%2 == 0 ? '\n' : ' '); } printk(KERN_DEBUG "\n"); @@ -198,9 +198,7 @@ static void iommu_full(struct device *dev, size_t size, int dir) * out. Hopefully no network devices use single mappings that big. */ - printk(KERN_ERR - "PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n", - size, dev->bus_id); + dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size); if (size > PAGE_SIZE*EMERGENCY_PAGES) { if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL) @@ -217,34 +215,24 @@ static void iommu_full(struct device *dev, size_t size, int dir) static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) { - u64 mask = *dev->dma_mask; - int high = addr + size > mask; - int mmu = high; - - if (force_iommu) - mmu = 1; - - return mmu; + return force_iommu || + !is_buffer_dma_capable(*dev->dma_mask, addr, size); } static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) { - u64 mask = *dev->dma_mask; - int high = addr + size > mask; - int mmu = high; - - return mmu; + return !is_buffer_dma_capable(*dev->dma_mask, addr, size); } /* Map a single continuous physical area into the IOMMU. * Caller needs to check if the iommu is needed and flush. */ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, - size_t size, int dir) + size_t size, int dir, unsigned long align_mask) { - unsigned long npages = to_pages(phys_mem, size); - unsigned long iommu_page = alloc_iommu(dev, npages); + unsigned long npages = iommu_num_pages(phys_mem, size); + unsigned long iommu_page = alloc_iommu(dev, npages, align_mask); int i; if (iommu_page == -1) { @@ -264,16 +252,6 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK); } -static dma_addr_t -gart_map_simple(struct device *dev, phys_addr_t paddr, size_t size, int dir) -{ - dma_addr_t map = dma_map_area(dev, paddr, size, dir); - - flush_gart(); - - return map; -} - /* Map a single area into the IOMMU */ static dma_addr_t gart_map_single(struct device *dev, phys_addr_t paddr, size_t size, int dir) @@ -281,12 +259,13 @@ gart_map_single(struct device *dev, phys_addr_t paddr, size_t size, int dir) unsigned long bus; if (!dev) - dev = &fallback_dev; + dev = &x86_dma_fallback_dev; if (!need_iommu(dev, paddr, size)) return paddr; - bus = gart_map_simple(dev, paddr, size, dir); + bus = dma_map_area(dev, paddr, size, dir, 0); + flush_gart(); return bus; } @@ -306,7 +285,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr, return; iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT; - npages = to_pages(dma_addr, size); + npages = iommu_num_pages(dma_addr, size); for (i = 0; i < npages; i++) { iommu_gatt_base[iommu_page + i] = gart_unmapped_entry; CLEAR_LEAK(iommu_page + i); @@ -345,7 +324,7 @@ static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg, unsigned long addr = sg_phys(s); if (nonforced_iommu(dev, addr, s->length)) { - addr = dma_map_area(dev, addr, s->length, dir); + addr = dma_map_area(dev, addr, s->length, dir, 0); if (addr == bad_dma_address) { if (i > 0) gart_unmap_sg(dev, sg, i, dir); @@ -367,7 +346,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start, int nelems, struct scatterlist *sout, unsigned long pages) { - unsigned long iommu_start = alloc_iommu(dev, pages); + unsigned long iommu_start = alloc_iommu(dev, pages, 0); unsigned long iommu_page = iommu_start; struct scatterlist *s; int i; @@ -389,7 +368,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start, } addr = phys_addr; - pages = to_pages(s->offset, s->length); + pages = iommu_num_pages(s->offset, s->length); while (pages--) { iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr); SET_LEAK(iommu_page); @@ -432,7 +411,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) return 0; if (!dev) - dev = &fallback_dev; + dev = &x86_dma_fallback_dev; out = 0; start = 0; @@ -472,7 +451,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) seg_size += s->length; need = nextneed; - pages += to_pages(s->offset, s->length); + pages += iommu_num_pages(s->offset, s->length); ps = s; } if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0) @@ -504,6 +483,46 @@ error: return 0; } +/* allocate and map a coherent mapping */ +static void * +gart_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr, + gfp_t flag) +{ + dma_addr_t paddr; + unsigned long align_mask; + struct page *page; + + if (force_iommu && !(flag & GFP_DMA)) { + flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); + page = alloc_pages(flag | __GFP_ZERO, get_order(size)); + if (!page) + return NULL; + + align_mask = (1UL << get_order(size)) - 1; + paddr = dma_map_area(dev, page_to_phys(page), size, + DMA_BIDIRECTIONAL, align_mask); + + flush_gart(); + if (paddr != bad_dma_address) { + *dma_addr = paddr; + return page_address(page); + } + __free_pages(page, get_order(size)); + } else + return dma_generic_alloc_coherent(dev, size, dma_addr, flag); + + return NULL; +} + +/* free a coherent mapping */ +static void +gart_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_addr) +{ + gart_unmap_single(dev, dma_addr, size, DMA_BIDIRECTIONAL); + free_pages((unsigned long)vaddr, get_order(size)); +} + static int no_agp; static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size) @@ -534,8 +553,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -549,14 +568,63 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static void enable_gart_translations(void) +{ + int i; + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + enable_gart_translation(dev, __pa(agp_gatt_table)); + } +} + +/* + * If fix_up_north_bridges is set, the north bridges have to be fixed up on + * resume in the same way as they are handled in gart_iommu_hole_init(). + */ +static bool fix_up_north_bridges; +static u32 aperture_order; +static u32 aperture_alloc; + +void set_up_gart_resume(u32 aper_order, u32 aper_alloc) +{ + fix_up_north_bridges = true; + aperture_order = aper_order; + aperture_alloc = aper_alloc; +} + static int gart_resume(struct sys_device *dev) { + printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n"); + + if (fix_up_north_bridges) { + int i; + + printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n"); + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + /* + * Don't enable translations just yet. That is the next + * step. Restore the pre-suspend aperture settings. + */ + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, + aperture_order << 1); + pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, + aperture_alloc >> 25); + } + } + + enable_gart_translations(); + return 0; } static int gart_suspend(struct sys_device *dev, pm_message_t state) { - return -EINVAL; + return 0; } static struct sysdev_class gart_sysdev_class = { @@ -605,40 +673,29 @@ static __init int init_k8_gatt(struct agp_kern_info *info) info->aper_size = aper_size >> 20; gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32); - gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size)); + gatt = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(gatt_size)); if (!gatt) panic("Cannot allocate GATT table"); if (set_memory_uc((unsigned long)gatt, gatt_size >> PAGE_SHIFT)) panic("Could not set GART PTEs to uncacheable pages"); - memset(gatt, 0, gatt_size); agp_gatt_table = gatt; - for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; - - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); - - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); - - pci_write_config_dword(dev, 0x90, ctl); - } + enable_gart_translations(); error = sysdev_class_register(&gart_sysdev_class); if (!error) error = sysdev_register(&device_gart); if (error) - panic("Could not register gart_sysdev -- would corrupt data on next suspend"); + panic("Could not register gart_sysdev -- " + "would corrupt data on next suspend"); + flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", aper_base, aper_size>>10); + return 0; nommu: @@ -648,21 +705,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info) return -1; } -extern int agp_amd64_init(void); - -static const struct dma_mapping_ops gart_dma_ops = { - .mapping_error = NULL, +static struct dma_mapping_ops gart_dma_ops = { .map_single = gart_map_single, - .map_simple = gart_map_simple, .unmap_single = gart_unmap_single, - .sync_single_for_cpu = NULL, - .sync_single_for_device = NULL, - .sync_single_range_for_cpu = NULL, - .sync_single_range_for_device = NULL, - .sync_sg_for_cpu = NULL, - .sync_sg_for_device = NULL, .map_sg = gart_map_sg, .unmap_sg = gart_unmap_sg, + .alloc_coherent = gart_alloc_coherent, + .free_coherent = gart_free_coherent, }; void gart_iommu_shutdown(void) @@ -677,11 +726,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } @@ -689,7 +738,8 @@ void __init gart_iommu_init(void) { struct agp_kern_info info; unsigned long iommu_start; - unsigned long aper_size; + unsigned long aper_base, aper_size; + unsigned long start_pfn, end_pfn; unsigned long scratch; long i; @@ -716,35 +766,40 @@ void __init gart_iommu_init(void) return; if (no_iommu || - (!force_iommu && end_pfn <= MAX_DMA32_PFN) || + (!force_iommu && max_pfn <= MAX_DMA32_PFN) || !gart_iommu_aperture || (no_agp && init_k8_gatt(&info) < 0)) { - if (end_pfn > MAX_DMA32_PFN) { + if (max_pfn > MAX_DMA32_PFN) { printk(KERN_WARNING "More than 4GB of memory " - "but GART IOMMU not available.\n" - KERN_WARNING "falling back to iommu=soft.\n"); + "but GART IOMMU not available.\n"); + printk(KERN_WARNING "falling back to iommu=soft.\n"); } return; } + /* need to map that range */ + aper_size = info.aper_size << 20; + aper_base = info.aper_base; + end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT); + if (end_pfn > max_low_pfn_mapped) { + start_pfn = (aper_base>>PAGE_SHIFT); + init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); + } + printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n"); - aper_size = info.aper_size * 1024 * 1024; iommu_size = check_iommu_size(info.aper_base, aper_size); iommu_pages = iommu_size >> PAGE_SHIFT; - iommu_gart_bitmap = (void *) __get_free_pages(GFP_KERNEL, + iommu_gart_bitmap = (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(iommu_pages/8)); if (!iommu_gart_bitmap) panic("Cannot allocate iommu bitmap\n"); - memset(iommu_gart_bitmap, 0, iommu_pages/8); #ifdef CONFIG_IOMMU_LEAK if (leak_trace) { - iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL, + iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, get_order(iommu_pages*sizeof(void *))); - if (iommu_leak_tab) - memset(iommu_leak_tab, 0, iommu_pages * 8); - else + if (!iommu_leak_tab) printk(KERN_DEBUG "PCI-DMA: Cannot allocate leak trace area\n"); } @@ -754,7 +809,7 @@ void __init gart_iommu_init(void) * Out of IOMMU space handling. * Reserve some invalid pages at the beginning of the GART. */ - set_bit_string(iommu_gart_bitmap, 0, EMERGENCY_PAGES); + iommu_area_reserve(iommu_gart_bitmap, 0, EMERGENCY_PAGES); agp_memory_reserved = iommu_size; printk(KERN_INFO @@ -788,10 +843,10 @@ void __init gart_iommu_init(void) wbinvd(); /* - * Try to workaround a bug (thanks to BenH) + * Try to workaround a bug (thanks to BenH): * Set unmapped entries to a scratch page instead of 0. * Any prefetches that hit unmapped entries won't get an bus abort - * then. + * then. (P2P bridge may be prefetching on DMA reads). */ scratch = get_zeroed_page(GFP_KERNEL); if (!scratch) @@ -812,7 +867,8 @@ void __init gart_parse_options(char *p) if (!strncmp(p, "leak", 4)) { leak_trace = 1; p += 4; - if (*p == '=') ++p; + if (*p == '=') + ++p; if (isdigit(*p) && get_option(&p, &arg)) iommu_leak_pages = arg; } diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c index aec43d56f49..c70ab5a5d4c 100644 --- a/arch/x86/kernel/pci-nommu.c +++ b/arch/x86/kernel/pci-nommu.c @@ -7,14 +7,14 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> -#include <asm/gart.h> +#include <asm/iommu.h> #include <asm/processor.h> #include <asm/dma.h> static int check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size) { - if (hwdev && bus + size > *hwdev->dma_mask) { + if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) { if (*hwdev->dma_mask >= DMA_32BIT_MASK) printk(KERN_ERR "nommu_%s: overflow %Lx+%zu of device mask %Lx\n", @@ -72,21 +72,17 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, return nents; } -/* Make sure we keep the same behaviour */ -static int nommu_mapping_error(dma_addr_t dma_addr) +static void nommu_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_addr) { -#ifdef CONFIG_X86_32 - return 0; -#else - return (dma_addr == bad_dma_address); -#endif + free_pages((unsigned long)vaddr, get_order(size)); } - -const struct dma_mapping_ops nommu_dma_ops = { +struct dma_mapping_ops nommu_dma_ops = { + .alloc_coherent = dma_generic_alloc_coherent, + .free_coherent = nommu_free_coherent, .map_single = nommu_map_single, .map_sg = nommu_map_sg, - .mapping_error = nommu_mapping_error, .is_phys = 1, }; diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c index 490da7f4b8d..c4ce0332759 100644 --- a/arch/x86/kernel/pci-swiotlb_64.c +++ b/arch/x86/kernel/pci-swiotlb_64.c @@ -5,7 +5,7 @@ #include <linux/module.h> #include <linux/dma-mapping.h> -#include <asm/gart.h> +#include <asm/iommu.h> #include <asm/swiotlb.h> #include <asm/dma.h> @@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size, return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction); } -const struct dma_mapping_ops swiotlb_dma_ops = { +struct dma_mapping_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, .alloc_coherent = swiotlb_alloc_coherent, .free_coherent = swiotlb_free_coherent, @@ -38,7 +38,7 @@ const struct dma_mapping_ops swiotlb_dma_ops = { void __init pci_swiotlb_init(void) { /* don't initialize swiotlb if iommu=off (no_iommu=1) */ - if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN) + if (!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN) swiotlb = 1; if (swiotlb_force) swiotlb = 1; diff --git a/arch/x86/kernel/pcspeaker.c b/arch/x86/kernel/pcspeaker.c index bc1f2d3ea27..a311ffcaad1 100644 --- a/arch/x86/kernel/pcspeaker.c +++ b/arch/x86/kernel/pcspeaker.c @@ -1,20 +1,13 @@ #include <linux/platform_device.h> -#include <linux/errno.h> +#include <linux/err.h> #include <linux/init.h> static __init int add_pcspkr(void) { struct platform_device *pd; - int ret; - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; + pd = platform_device_register_simple("pcspkr", -1, NULL, 0); - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; + return IS_ERR(pd) ? PTR_ERR(pd) : 0; } device_initcall(add_pcspkr); diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms_32.c new file mode 100644 index 00000000000..675a48c404a --- /dev/null +++ b/arch/x86/kernel/probe_roms_32.c @@ -0,0 +1,166 @@ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/uaccess.h> +#include <linux/mmzone.h> +#include <linux/ioport.h> +#include <linux/seq_file.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/edd.h> +#include <linux/dmi.h> +#include <linux/pfn.h> +#include <linux/pci.h> +#include <asm/pci-direct.h> + + +#include <asm/e820.h> +#include <asm/mmzone.h> +#include <asm/setup.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <setup_arch.h> + +static struct resource system_rom_resource = { + .name = "System ROM", + .start = 0xf0000, + .end = 0xfffff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource extension_rom_resource = { + .name = "Extension ROM", + .start = 0xe0000, + .end = 0xeffff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource adapter_rom_resources[] = { { + .name = "Adapter ROM", + .start = 0xc8000, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +} }; + +static struct resource video_rom_resource = { + .name = "Video ROM", + .start = 0xc0000, + .end = 0xc7fff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +#define ROMSIGNATURE 0xaa55 + +static int __init romsignature(const unsigned char *rom) +{ + const unsigned short * const ptr = (const unsigned short *)rom; + unsigned short sig; + + return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE; +} + +static int __init romchecksum(const unsigned char *rom, unsigned long length) +{ + unsigned char sum, c; + + for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--) + sum += c; + return !length && !sum; +} + +void __init probe_roms(void) +{ + const unsigned char *rom; + unsigned long start, length, upper; + unsigned char c; + int i; + + /* video rom */ + upper = adapter_rom_resources[0].start; + for (start = video_rom_resource.start; start < upper; start += 2048) { + rom = isa_bus_to_virt(start); + if (!romsignature(rom)) + continue; + + video_rom_resource.start = start; + + if (probe_kernel_address(rom + 2, c) != 0) + continue; + + /* 0 < length <= 0x7f * 512, historically */ + length = c * 512; + + /* if checksum okay, trust length byte */ + if (length && romchecksum(rom, length)) + video_rom_resource.end = start + length - 1; + + request_resource(&iomem_resource, &video_rom_resource); + break; + } + + start = (video_rom_resource.end + 1 + 2047) & ~2047UL; + if (start < upper) + start = upper; + + /* system rom */ + request_resource(&iomem_resource, &system_rom_resource); + upper = system_rom_resource.start; + + /* check for extension rom (ignore length byte!) */ + rom = isa_bus_to_virt(extension_rom_resource.start); + if (romsignature(rom)) { + length = extension_rom_resource.end - extension_rom_resource.start + 1; + if (romchecksum(rom, length)) { + request_resource(&iomem_resource, &extension_rom_resource); + upper = extension_rom_resource.start; + } + } + + /* check for adapter roms on 2k boundaries */ + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { + rom = isa_bus_to_virt(start); + if (!romsignature(rom)) + continue; + + if (probe_kernel_address(rom + 2, c) != 0) + continue; + + /* 0 < length <= 0x7f * 512, historically */ + length = c * 512; + + /* but accept any length that fits if checksum okay */ + if (!length || start + length > upper || !romchecksum(rom, length)) + continue; + + adapter_rom_resources[i].start = start; + adapter_rom_resources[i].end = start + length - 1; + request_resource(&iomem_resource, &adapter_rom_resources[i]); + + start = adapter_rom_resources[i++].end & ~2047UL; + } +} + diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ba370dc8685..c622772744d 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -6,6 +6,13 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/pm.h> +#include <linux/clockchips.h> +#include <asm/system.h> + +unsigned long idle_halt; +EXPORT_SYMBOL(idle_halt); +unsigned long idle_nomwait; +EXPORT_SYMBOL(idle_nomwait); struct kmem_cache *task_xstate_cachep; @@ -45,6 +52,76 @@ void arch_task_cache_init(void) SLAB_PANIC, NULL); } +/* + * Idle related variables and functions + */ +unsigned long boot_option_idle_override = 0; +EXPORT_SYMBOL(boot_option_idle_override); + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); + +#ifdef CONFIG_X86_32 +/* + * This halt magic was a workaround for ancient floppy DMA + * wreckage. It should be safe to remove. + */ +static int hlt_counter; +void disable_hlt(void) +{ + hlt_counter++; +} +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} +EXPORT_SYMBOL(enable_hlt); + +static inline int hlt_use_halt(void) +{ + return (!hlt_counter && boot_cpu_data.hlt_works_ok); +} +#else +static inline int hlt_use_halt(void) +{ + return 1; +} +#endif + +/* + * We use this if we don't have any better + * idle routine.. + */ +void default_idle(void) +{ + if (hlt_use_halt()) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else + local_irq_enable(); + current_thread_info()->status |= TS_POLLING; + } else { + local_irq_enable(); + /* loop is done by the caller */ + cpu_relax(); + } +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(default_idle); +#endif + static void do_nothing(void *unused) { } @@ -61,7 +138,7 @@ void cpu_idle_wait(void) { smp_mb(); /* kick all the CPUs so that they exit out of pm_idle */ - smp_call_function(do_nothing, NULL, 0, 1); + smp_call_function(do_nothing, NULL, 1); } EXPORT_SYMBOL_GPL(cpu_idle_wait); @@ -107,7 +184,8 @@ static void mwait_idle(void) static void poll_idle(void) { local_irq_enable(); - cpu_relax(); + while (!need_resched()) + cpu_relax(); } /* @@ -122,54 +200,170 @@ static void poll_idle(void) * * idle=mwait overrides this decision and forces the usage of mwait. */ +static int __cpuinitdata force_mwait; + +#define MWAIT_INFO 0x05 +#define MWAIT_ECX_EXTENDED_INFO 0x01 +#define MWAIT_EDX_C1 0xf0 + static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) { + u32 eax, ebx, ecx, edx; + if (force_mwait) return 1; - if (c->x86_vendor == X86_VENDOR_AMD) { - switch(c->x86) { - case 0x10: - case 0x11: - return 0; - } - } + if (c->cpuid_level < MWAIT_INFO) + return 0; + + cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx); + /* Check, whether EDX has extended info about MWAIT */ + if (!(ecx & MWAIT_ECX_EXTENDED_INFO)) + return 1; + + /* + * edx enumeratios MONITOR/MWAIT extensions. Check, whether + * C1 supports MWAIT + */ + return (edx & MWAIT_EDX_C1); +} + +/* + * Check for AMD CPUs, which have potentially C1E support + */ +static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) +{ + if (c->x86_vendor != X86_VENDOR_AMD) + return 0; + + if (c->x86 < 0x0F) + return 0; + + /* Family 0x0f models < rev F do not have C1E */ + if (c->x86 == 0x0f && c->x86_model < 0x40) + return 0; + return 1; } -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +static cpumask_t c1e_mask = CPU_MASK_NONE; +static int c1e_detected; + +void c1e_remove_cpu(int cpu) { - static int selected; + cpu_clear(cpu, c1e_mask); +} - if (selected) +/* + * C1E aware idle routine. We check for C1E active in the interrupt + * pending message MSR. If we detect C1E, then we handle it the same + * way as C3 power states (local apic timer and TSC stop) + */ +static void c1e_idle(void) +{ + if (need_resched()) return; + + if (!c1e_detected) { + u32 lo, hi; + + rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); + if (lo & K8_INTP_C1E_ACTIVE_MASK) { + c1e_detected = 1; + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + mark_tsc_unstable("TSC halt in AMD C1E"); + printk(KERN_INFO "System has AMD C1E enabled\n"); + set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); + } + } + + if (c1e_detected) { + int cpu = smp_processor_id(); + + if (!cpu_isset(cpu, c1e_mask)) { + cpu_set(cpu, c1e_mask); + /* + * Force broadcast so ACPI can not interfere. Needs + * to run with interrupts enabled as it uses + * smp_function_call. + */ + local_irq_enable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, + &cpu); + printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", + cpu); + local_irq_disable(); + } + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + + default_idle(); + + /* + * The switch back from broadcast mode needs to be + * called with interrupts disabled. + */ + local_irq_disable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + local_irq_enable(); + } else + default_idle(); +} + +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +{ #ifdef CONFIG_X86_SMP if (pm_idle == poll_idle && smp_num_siblings > 1) { printk(KERN_WARNING "WARNING: polling idle and HT enabled," " performance may degrade.\n"); } #endif + if (pm_idle) + return; + if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) { /* - * Skip, if setup has overridden idle. * One CPU supports mwait => All CPUs supports mwait */ - if (!pm_idle) { - printk(KERN_INFO "using mwait in idle threads.\n"); - pm_idle = mwait_idle; - } - } - selected = 1; + printk(KERN_INFO "using mwait in idle threads.\n"); + pm_idle = mwait_idle; + } else if (check_c1e_idle(c)) { + printk(KERN_INFO "using C1E aware idle routine\n"); + pm_idle = c1e_idle; + } else + pm_idle = default_idle; } static int __init idle_setup(char *str) { + if (!str) + return -EINVAL; + if (!strcmp(str, "poll")) { printk("using polling idle threads.\n"); pm_idle = poll_idle; } else if (!strcmp(str, "mwait")) force_mwait = 1; - else + else if (!strcmp(str, "halt")) { + /* + * When the boot option of idle=halt is added, halt is + * forced to be used for CPU idle. In such case CPU C2/C3 + * won't be used again. + * To continue to load the CPU idle driver, don't touch + * the boot_option_idle_override. + */ + pm_idle = default_idle; + idle_halt = 1; + return 0; + } else if (!strcmp(str, "nomwait")) { + /* + * If the boot option of "idle=nomwait" is added, + * it means that mwait will be disabled for CPU C2/C3 + * states. In such case it won't touch the variable + * of boot_option_idle_override. + */ + idle_nomwait = 1; + return 0; + } else return -1; boot_option_idle_override = 1; diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 6d5483356e7..922c14058f9 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -37,6 +37,7 @@ #include <linux/tick.h> #include <linux/percpu.h> #include <linux/prctl.h> +#include <linux/dmi.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -55,14 +56,12 @@ #include <asm/tlbflush.h> #include <asm/cpu.h> #include <asm/kdebug.h> +#include <asm/idle.h> +#include <asm/syscalls.h> +#include <asm/smp.h> asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -static int hlt_counter; - -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); @@ -77,80 +76,12 @@ unsigned long thread_saved_pc(struct task_struct *tsk) return ((unsigned long *)tsk->thread.sp)[3]; } -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - } else { - local_irq_enable(); - /* loop is done by the caller */ - cpu_relax(); - } -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(default_idle); -#endif - -#ifdef CONFIG_HOTPLUG_CPU -#include <asm/nmi.h> -/* We don't actually take CPU down, just spin without interrupts. */ -static inline void play_dead(void) -{ - /* This must be done before dead CPU ack */ - cpu_exit_clear(); - wbinvd(); - mb(); - /* Ack it */ - __get_cpu_var(cpu_state) = CPU_DEAD; - - /* - * With physical CPU hotplug, we should halt the cpu - */ - local_irq_disable(); - while (1) - halt(); -} -#else +#ifndef CONFIG_SMP static inline void play_dead(void) { BUG(); } -#endif /* CONFIG_HOTPLUG_CPU */ +#endif /* * The idle thread. There's no useful work to be @@ -166,26 +97,24 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched()) { - void (*idle)(void); check_pgt_cache(); rmb(); - idle = pm_idle; if (rcu_pending(cpu)) rcu_check_callbacks(cpu, 0); - if (!idle) - idle = default_idle; - if (cpu_is_offline(cpu)) play_dead(); local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; - idle(); + /* Don't trace irqs off for idle */ + stop_critical_timings(); + pm_idle(); + start_critical_timings(); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); @@ -200,6 +129,7 @@ void __show_registers(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned long sp; unsigned short ss, gs; + const char *board; if (user_mode_vm(regs)) { sp = regs->sp; @@ -212,11 +142,15 @@ void __show_registers(struct pt_regs *regs, int all) } printk("\n"); - printk("Pid: %d, comm: %s %s (%s %.*s)\n", + + board = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!board) + board = ""; + printk("Pid: %d, comm: %s %s (%s %.*s) %s\n", task_pid_nr(current), current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); + init_utsname()->version, board); printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", (u16)regs->cs, regs->ip, regs->flags, @@ -316,6 +250,14 @@ void exit_thread(void) tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; put_cpu(); } +#ifdef CONFIG_X86_DS + /* Free any DS contexts that have not been properly released. */ + if (unlikely(current->thread.ds_ctx)) { + /* we clear debugctl to make sure DS is not used. */ + update_debugctlmsr(0); + ds_free(current->thread.ds_ctx); + } +#endif /* CONFIG_X86_DS */ } void flush_thread(void) @@ -333,6 +275,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } @@ -476,6 +419,35 @@ int set_tsc_mode(unsigned int val) return 0; } +#ifdef CONFIG_X86_DS +static int update_debugctl(struct thread_struct *prev, + struct thread_struct *next, unsigned long debugctl) +{ + unsigned long ds_prev = 0; + unsigned long ds_next = 0; + + if (prev->ds_ctx) + ds_prev = (unsigned long)prev->ds_ctx->ds; + if (next->ds_ctx) + ds_next = (unsigned long)next->ds_ctx->ds; + + if (ds_next != ds_prev) { + /* we clear debugctl to make sure DS + * is not in use when we change it */ + debugctl = 0; + update_debugctlmsr(0); + wrmsr(MSR_IA32_DS_AREA, ds_next, 0); + } + return debugctl; +} +#else +static int update_debugctl(struct thread_struct *prev, + struct thread_struct *next, unsigned long debugctl) +{ + return debugctl; +} +#endif /* CONFIG_X86_DS */ + static noinline void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, struct tss_struct *tss) @@ -486,14 +458,7 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, prev = &prev_p->thread; next = &next_p->thread; - debugctl = prev->debugctlmsr; - if (next->ds_area_msr != prev->ds_area_msr) { - /* we clear debugctl to make sure DS - * is not in use when we change it */ - debugctl = 0; - update_debugctlmsr(0); - wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0); - } + debugctl = update_debugctl(prev, next, prev->debugctlmsr); if (next->debugctlmsr != debugctl) update_debugctlmsr(next->debugctlmsr); @@ -517,13 +482,13 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, hard_enable_TSC(); } -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES); -#endif +#endif /* CONFIG_X86_PTRACE_BTS */ if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ac54ff56df8..ca80394ef5b 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -37,11 +37,11 @@ #include <linux/kdebug.h> #include <linux/tick.h> #include <linux/prctl.h> +#include <linux/uaccess.h> +#include <linux/io.h> -#include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/system.h> -#include <asm/io.h> #include <asm/processor.h> #include <asm/i387.h> #include <asm/mmu_context.h> @@ -51,20 +51,12 @@ #include <asm/proto.h> #include <asm/ia32.h> #include <asm/idle.h> +#include <asm/syscalls.h> asmlinkage extern void ret_from_fork(void); unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - static ATOMIC_NOTIFIER_HEAD(idle_notifier); void idle_notifier_register(struct notifier_block *n) @@ -94,48 +86,12 @@ void exit_idle(void) __exit_idle(); } -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; -} - -#ifdef CONFIG_HOTPLUG_CPU -DECLARE_PER_CPU(int, cpu_state); - -#include <asm/nmi.h> -/* We halt the CPU with physical CPU hotplug */ -static inline void play_dead(void) -{ - idle_task_exit(); - wbinvd(); - mb(); - /* Ack it */ - __get_cpu_var(cpu_state) = CPU_DEAD; - - local_irq_disable(); - while (1) - halt(); -} -#else +#ifndef CONFIG_SMP static inline void play_dead(void) { BUG(); } -#endif /* CONFIG_HOTPLUG_CPU */ +#endif /* * The idle thread. There's no useful work to be @@ -148,14 +104,11 @@ void cpu_idle(void) current_thread_info()->status |= TS_POLLING; /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched()) { - void (*idle)(void); rmb(); - idle = pm_idle; - if (!idle) - idle = default_idle; + if (cpu_is_offline(smp_processor_id())) play_dead(); /* @@ -165,7 +118,10 @@ void cpu_idle(void) */ local_irq_disable(); enter_idle(); - idle(); + /* Don't trace irqs off for idle */ + stop_critical_timings(); + pm_idle(); + start_critical_timings(); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ @@ -180,7 +136,7 @@ void cpu_idle(void) } /* Prints also some state that isn't saved in the pt_regs */ -void __show_regs(struct pt_regs * regs) +void __show_regs(struct pt_regs *regs) { unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs; unsigned long d0, d1, d2, d3, d6, d7; @@ -189,59 +145,61 @@ void __show_regs(struct pt_regs * regs) printk("\n"); print_modules(); - printk("Pid: %d, comm: %.20s %s %s %.*s\n", + printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); - printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); + printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); - printk("RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->sp, - regs->flags); - printk("RAX: %016lx RBX: %016lx RCX: %016lx\n", + printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, + regs->sp, regs->flags); + printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n", regs->ax, regs->bx, regs->cx); - printk("RDX: %016lx RSI: %016lx RDI: %016lx\n", + printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n", regs->dx, regs->si, regs->di); - printk("RBP: %016lx R08: %016lx R09: %016lx\n", + printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n", regs->bp, regs->r8, regs->r9); - printk("R10: %016lx R11: %016lx R12: %016lx\n", - regs->r10, regs->r11, regs->r12); - printk("R13: %016lx R14: %016lx R15: %016lx\n", - regs->r13, regs->r14, regs->r15); - - asm("movl %%ds,%0" : "=r" (ds)); - asm("movl %%cs,%0" : "=r" (cs)); - asm("movl %%es,%0" : "=r" (es)); + printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n", + regs->r10, regs->r11, regs->r12); + printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n", + regs->r13, regs->r14, regs->r15); + + asm("movl %%ds,%0" : "=r" (ds)); + asm("movl %%cs,%0" : "=r" (cs)); + asm("movl %%es,%0" : "=r" (es)); asm("movl %%fs,%0" : "=r" (fsindex)); asm("movl %%gs,%0" : "=r" (gsindex)); rdmsrl(MSR_FS_BASE, fs); - rdmsrl(MSR_GS_BASE, gs); - rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); + rdmsrl(MSR_GS_BASE, gs); + rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); cr0 = read_cr0(); cr2 = read_cr2(); cr3 = read_cr3(); cr4 = read_cr4(); - printk("FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", - fs,fsindex,gs,gsindex,shadowgs); - printk("CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); - printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4); + printk(KERN_INFO "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", + fs, fsindex, gs, gsindex, shadowgs); + printk(KERN_INFO "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, + es, cr0); + printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, + cr4); get_debugreg(d0, 0); get_debugreg(d1, 1); get_debugreg(d2, 2); - printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); + printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); get_debugreg(d3, 3); get_debugreg(d6, 6); get_debugreg(d7, 7); - printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); + printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); } void show_regs(struct pt_regs *regs) { - printk("CPU %d:", smp_processor_id()); + printk(KERN_INFO "CPU %d:", smp_processor_id()); __show_regs(regs); show_trace(NULL, regs, (void *)(regs + 1), regs->bp); } @@ -267,6 +225,14 @@ void exit_thread(void) t->io_bitmap_max = 0; put_cpu(); } +#ifdef CONFIG_X86_DS + /* Free any DS contexts that have not been properly released. */ + if (unlikely(t->ds_ctx)) { + /* we clear debugctl to make sure DS is not used. */ + update_debugctlmsr(0); + ds_free(t->ds_ctx); + } +#endif /* CONFIG_X86_DS */ } void flush_thread(void) @@ -294,6 +260,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } @@ -341,10 +308,10 @@ void prepare_to_copy(struct task_struct *tsk) int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, unsigned long unused, - struct task_struct * p, struct pt_regs * regs) + struct task_struct *p, struct pt_regs *regs) { int err; - struct pt_regs * childregs; + struct pt_regs *childregs; struct task_struct *me = current; childregs = ((struct pt_regs *) @@ -365,10 +332,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, p->thread.fs = me->thread.fs; p->thread.gs = me->thread.gs; - asm("mov %%gs,%0" : "=m" (p->thread.gsindex)); - asm("mov %%fs,%0" : "=m" (p->thread.fsindex)); - asm("mov %%es,%0" : "=m" (p->thread.es)); - asm("mov %%ds,%0" : "=m" (p->thread.ds)); + savesegment(gs, p->thread.gsindex); + savesegment(fs, p->thread.fsindex); + savesegment(es, p->thread.es); + savesegment(ds, p->thread.ds); if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); @@ -389,10 +356,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, if (test_thread_flag(TIF_IA32)) err = do_set_thread_area(p, -1, (struct user_desc __user *)childregs->si, 0); - else -#endif - err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); - if (err) + else +#endif + err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); + if (err) goto out; } err = 0; @@ -407,7 +374,9 @@ out: void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) { - asm volatile("movl %0, %%fs; movl %0, %%es; movl %0, %%ds" :: "r"(0)); + loadsegment(fs, 0); + loadsegment(es, 0); + loadsegment(ds, 0); load_gs_index(0); regs->ip = new_ip; regs->sp = new_sp; @@ -497,13 +466,27 @@ static inline void __switch_to_xtra(struct task_struct *prev_p, next = &next_p->thread; debugctl = prev->debugctlmsr; - if (next->ds_area_msr != prev->ds_area_msr) { - /* we clear debugctl to make sure DS - * is not in use when we change it */ - debugctl = 0; - update_debugctlmsr(0); - wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr); + +#ifdef CONFIG_X86_DS + { + unsigned long ds_prev = 0, ds_next = 0; + + if (prev->ds_ctx) + ds_prev = (unsigned long)prev->ds_ctx->ds; + if (next->ds_ctx) + ds_next = (unsigned long)next->ds_ctx->ds; + + if (ds_next != ds_prev) { + /* + * We clear debugctl to make sure DS + * is not in use when we change it: + */ + debugctl = 0; + update_debugctlmsr(0); + wrmsrl(MSR_IA32_DS_AREA, ds_next); + } } +#endif /* CONFIG_X86_DS */ if (next->debugctlmsr != debugctl) update_debugctlmsr(next->debugctlmsr); @@ -541,13 +524,13 @@ static inline void __switch_to_xtra(struct task_struct *prev_p, memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); } -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES); -#endif +#endif /* CONFIG_X86_PTRACE_BTS */ } /* @@ -562,13 +545,14 @@ static inline void __switch_to_xtra(struct task_struct *prev_p, struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct *next_p) { - struct thread_struct *prev = &prev_p->thread, - *next = &next_p->thread; + struct thread_struct *prev = &prev_p->thread; + struct thread_struct *next = &next_p->thread; int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); + unsigned fsindex, gsindex; /* we're going to use this soon, after a few expensive things */ - if (next_p->fpu_counter>5) + if (next_p->fpu_counter > 5) prefetch(next->xstate); /* @@ -576,69 +560,82 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) */ load_sp0(tss, next); - /* + /* * Switch DS and ES. * This won't pick up thread selector changes, but I guess that is ok. */ - asm volatile("mov %%es,%0" : "=m" (prev->es)); + savesegment(es, prev->es); if (unlikely(next->es | prev->es)) - loadsegment(es, next->es); - - asm volatile ("mov %%ds,%0" : "=m" (prev->ds)); + loadsegment(es, next->es); + + savesegment(ds, prev->ds); if (unlikely(next->ds | prev->ds)) loadsegment(ds, next->ds); + + /* We must save %fs and %gs before load_TLS() because + * %fs and %gs may be cleared by load_TLS(). + * + * (e.g. xen_load_tls()) + */ + savesegment(fs, fsindex); + savesegment(gs, gsindex); + load_TLS(next, cpu); - /* + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated, and must be + * done before math_state_restore, so the TS bit is up + * to date. + */ + arch_leave_lazy_cpu_mode(); + + /* * Switch FS and GS. + * + * Segment register != 0 always requires a reload. Also + * reload when it has changed. When prev process used 64bit + * base always reload to avoid an information leak. */ - { - unsigned fsindex; - asm volatile("movl %%fs,%0" : "=r" (fsindex)); - /* segment register != 0 always requires a reload. - also reload when it has changed. - when prev process used 64bit base always reload - to avoid an information leak. */ - if (unlikely(fsindex | next->fsindex | prev->fs)) { - loadsegment(fs, next->fsindex); - /* check if the user used a selector != 0 - * if yes clear 64bit base, since overloaded base - * is always mapped to the Null selector - */ - if (fsindex) - prev->fs = 0; - } - /* when next process has a 64bit base use it */ - if (next->fs) - wrmsrl(MSR_FS_BASE, next->fs); - prev->fsindex = fsindex; + if (unlikely(fsindex | next->fsindex | prev->fs)) { + loadsegment(fs, next->fsindex); + /* + * Check if the user used a selector != 0; if yes + * clear 64bit base, since overloaded base is always + * mapped to the Null selector + */ + if (fsindex) + prev->fs = 0; } - { - unsigned gsindex; - asm volatile("movl %%gs,%0" : "=r" (gsindex)); - if (unlikely(gsindex | next->gsindex | prev->gs)) { - load_gs_index(next->gsindex); - if (gsindex) - prev->gs = 0; - } - if (next->gs) - wrmsrl(MSR_KERNEL_GS_BASE, next->gs); - prev->gsindex = gsindex; + /* when next process has a 64bit base use it */ + if (next->fs) + wrmsrl(MSR_FS_BASE, next->fs); + prev->fsindex = fsindex; + + if (unlikely(gsindex | next->gsindex | prev->gs)) { + load_gs_index(next->gsindex); + if (gsindex) + prev->gs = 0; } + if (next->gs) + wrmsrl(MSR_KERNEL_GS_BASE, next->gs); + prev->gsindex = gsindex; /* Must be after DS reload */ unlazy_fpu(prev_p); - /* + /* * Switch the PDA and FPU contexts. */ prev->usersp = read_pda(oldrsp); write_pda(oldrsp, next->usersp); - write_pda(pcurrent, next_p); + write_pda(pcurrent, next_p); write_pda(kernelstack, - (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); + (unsigned long)task_stack_page(next_p) + + THREAD_SIZE - PDA_STACKOFFSET); #ifdef CONFIG_CC_STACKPROTECTOR write_pda(stack_canary, next_p->stack_canary); /* @@ -675,7 +672,7 @@ long sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp, struct pt_regs *regs) { long error; - char * filename; + char *filename; filename = getname(name); error = PTR_ERR(filename); @@ -733,55 +730,55 @@ asmlinkage long sys_vfork(struct pt_regs *regs) unsigned long get_wchan(struct task_struct *p) { unsigned long stack; - u64 fp,ip; + u64 fp, ip; int count = 0; - if (!p || p == current || p->state==TASK_RUNNING) - return 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; stack = (unsigned long)task_stack_page(p); - if (p->thread.sp < stack || p->thread.sp > stack+THREAD_SIZE) + if (p->thread.sp < stack || p->thread.sp >= stack+THREAD_SIZE) return 0; fp = *(u64 *)(p->thread.sp); - do { + do { if (fp < (unsigned long)stack || - fp > (unsigned long)stack+THREAD_SIZE) - return 0; + fp >= (unsigned long)stack+THREAD_SIZE) + return 0; ip = *(u64 *)(fp+8); if (!in_sched_functions(ip)) return ip; - fp = *(u64 *)fp; - } while (count++ < 16); + fp = *(u64 *)fp; + } while (count++ < 16); return 0; } long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) -{ - int ret = 0; +{ + int ret = 0; int doit = task == current; int cpu; - switch (code) { + switch (code) { case ARCH_SET_GS: if (addr >= TASK_SIZE_OF(task)) - return -EPERM; + return -EPERM; cpu = get_cpu(); - /* handle small bases via the GDT because that's faster to + /* handle small bases via the GDT because that's faster to switch. */ - if (addr <= 0xffffffff) { - set_32bit_tls(task, GS_TLS, addr); - if (doit) { + if (addr <= 0xffffffff) { + set_32bit_tls(task, GS_TLS, addr); + if (doit) { load_TLS(&task->thread, cpu); - load_gs_index(GS_TLS_SEL); + load_gs_index(GS_TLS_SEL); } - task->thread.gsindex = GS_TLS_SEL; + task->thread.gsindex = GS_TLS_SEL; task->thread.gs = 0; - } else { + } else { task->thread.gsindex = 0; task->thread.gs = addr; if (doit) { load_gs_index(0); ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); - } + } } put_cpu(); break; @@ -797,7 +794,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) set_32bit_tls(task, FS_TLS, addr); if (doit) { load_TLS(&task->thread, cpu); - asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL)); + loadsegment(fs, FS_TLS_SEL); } task->thread.fsindex = FS_TLS_SEL; task->thread.fs = 0; @@ -807,7 +804,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) if (doit) { /* set the selector to 0 to not confuse __switch_to */ - asm volatile("movl %0,%%fs" :: "r" (0)); + loadsegment(fs, 0); ret = checking_wrmsrl(MSR_FS_BASE, addr); } } @@ -830,13 +827,12 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) if (task->thread.gsindex == GS_TLS_SEL) base = read_32bit_tls(task, GS_TLS); else if (doit) { - asm("movl %%gs,%0" : "=r" (gsindex)); + savesegment(gs, gsindex); if (gsindex) rdmsrl(MSR_KERNEL_GS_BASE, base); else base = task->thread.gs; - } - else + } else base = task->thread.gs; ret = put_user(base, (unsigned long __user *)addr); break; diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index a7835f28293..0a6d8c12e10 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/regset.h> +#include <linux/tracehook.h> #include <linux/user.h> #include <linux/elf.h> #include <linux/security.h> @@ -39,7 +40,9 @@ enum x86_regset { REGSET_GENERAL, REGSET_FP, REGSET_XFP, + REGSET_IOPERM64 = REGSET_XFP, REGSET_TLS, + REGSET_IOPERM32, }; /* @@ -69,7 +72,7 @@ static inline bool invalid_selector(u16 value) #define FLAG_MASK FLAG_MASK_32 -static long *pt_regs_access(struct pt_regs *regs, unsigned long regno) +static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno) { BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0); regno >>= 2; @@ -554,45 +557,138 @@ static int ptrace_set_debugreg(struct task_struct *child, return 0; } -#ifdef X86_BTS +/* + * These access the current or another (stopped) task's io permission + * bitmap for debugging or core dump. + */ +static int ioperm_active(struct task_struct *target, + const struct user_regset *regset) +{ + return target->thread.io_bitmap_max / regset->size; +} -static int ptrace_bts_get_size(struct task_struct *child) +static int ioperm_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) { - if (!child->thread.ds_area_msr) + if (!target->thread.io_bitmap_ptr) return -ENXIO; - return ds_get_bts_index((void *)child->thread.ds_area_msr); + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + target->thread.io_bitmap_ptr, + 0, IO_BITMAP_BYTES); +} + +#ifdef CONFIG_X86_PTRACE_BTS +/* + * The configuration for a particular BTS hardware implementation. + */ +struct bts_configuration { + /* the size of a BTS record in bytes; at most BTS_MAX_RECORD_SIZE */ + unsigned char sizeof_bts; + /* the size of a field in the BTS record in bytes */ + unsigned char sizeof_field; + /* a bitmask to enable/disable BTS in DEBUGCTL MSR */ + unsigned long debugctl_mask; +}; +static struct bts_configuration bts_cfg; + +#define BTS_MAX_RECORD_SIZE (8 * 3) + + +/* + * Branch Trace Store (BTS) uses the following format. Different + * architectures vary in the size of those fields. + * - source linear address + * - destination linear address + * - flags + * + * Later architectures use 64bit pointers throughout, whereas earlier + * architectures use 32bit pointers in 32bit mode. + * + * We compute the base address for the first 8 fields based on: + * - the field size stored in the DS configuration + * - the relative field position + * + * In order to store additional information in the BTS buffer, we use + * a special source address to indicate that the record requires + * special interpretation. + * + * Netburst indicated via a bit in the flags field whether the branch + * was predicted; this is ignored. + */ + +enum bts_field { + bts_from = 0, + bts_to, + bts_flags, + + bts_escape = (unsigned long)-1, + bts_qual = bts_to, + bts_jiffies = bts_flags +}; + +static inline unsigned long bts_get(const char *base, enum bts_field field) +{ + base += (bts_cfg.sizeof_field * field); + return *(unsigned long *)base; +} + +static inline void bts_set(char *base, enum bts_field field, unsigned long val) +{ + base += (bts_cfg.sizeof_field * field);; + (*(unsigned long *)base) = val; +} + +/* + * Translate a BTS record from the raw format into the bts_struct format + * + * out (out): bts_struct interpretation + * raw: raw BTS record + */ +static void ptrace_bts_translate_record(struct bts_struct *out, const void *raw) +{ + memset(out, 0, sizeof(*out)); + if (bts_get(raw, bts_from) == bts_escape) { + out->qualifier = bts_get(raw, bts_qual); + out->variant.jiffies = bts_get(raw, bts_jiffies); + } else { + out->qualifier = BTS_BRANCH; + out->variant.lbr.from_ip = bts_get(raw, bts_from); + out->variant.lbr.to_ip = bts_get(raw, bts_to); + } } -static int ptrace_bts_read_record(struct task_struct *child, - long index, +static int ptrace_bts_read_record(struct task_struct *child, size_t index, struct bts_struct __user *out) { struct bts_struct ret; - int retval; - int bts_end; - int bts_index; - - if (!child->thread.ds_area_msr) - return -ENXIO; + const void *bts_record; + size_t bts_index, bts_end; + int error; - if (index < 0) - return -EINVAL; + error = ds_get_bts_end(child, &bts_end); + if (error < 0) + return error; - bts_end = ds_get_bts_end((void *)child->thread.ds_area_msr); if (bts_end <= index) return -EINVAL; + error = ds_get_bts_index(child, &bts_index); + if (error < 0) + return error; + /* translate the ptrace bts index into the ds bts index */ - bts_index = ds_get_bts_index((void *)child->thread.ds_area_msr); - bts_index -= (index + 1); - if (bts_index < 0) - bts_index += bts_end; + bts_index += bts_end - (index + 1); + if (bts_end <= bts_index) + bts_index -= bts_end; + + error = ds_access_bts(child, bts_index, &bts_record); + if (error < 0) + return error; - retval = ds_read_bts((void *)child->thread.ds_area_msr, - bts_index, &ret); - if (retval < 0) - return retval; + ptrace_bts_translate_record(&ret, bts_record); if (copy_to_user(out, &ret, sizeof(ret))) return -EFAULT; @@ -600,101 +696,106 @@ static int ptrace_bts_read_record(struct task_struct *child, return sizeof(ret); } -static int ptrace_bts_clear(struct task_struct *child) -{ - if (!child->thread.ds_area_msr) - return -ENXIO; - - return ds_clear((void *)child->thread.ds_area_msr); -} - static int ptrace_bts_drain(struct task_struct *child, long size, struct bts_struct __user *out) { - int end, i; - void *ds = (void *)child->thread.ds_area_msr; - - if (!ds) - return -ENXIO; + struct bts_struct ret; + const unsigned char *raw; + size_t end, i; + int error; - end = ds_get_bts_index(ds); - if (end <= 0) - return end; + error = ds_get_bts_index(child, &end); + if (error < 0) + return error; if (size < (end * sizeof(struct bts_struct))) return -EIO; - for (i = 0; i < end; i++, out++) { - struct bts_struct ret; - int retval; + error = ds_access_bts(child, 0, (const void **)&raw); + if (error < 0) + return error; - retval = ds_read_bts(ds, i, &ret); - if (retval < 0) - return retval; + for (i = 0; i < end; i++, out++, raw += bts_cfg.sizeof_bts) { + ptrace_bts_translate_record(&ret, raw); if (copy_to_user(out, &ret, sizeof(ret))) return -EFAULT; } - ds_clear(ds); + error = ds_clear_bts(child); + if (error < 0) + return error; return end; } +static void ptrace_bts_ovfl(struct task_struct *child) +{ + send_sig(child->thread.bts_ovfl_signal, child, 0); +} + static int ptrace_bts_config(struct task_struct *child, long cfg_size, const struct ptrace_bts_config __user *ucfg) { struct ptrace_bts_config cfg; - int bts_size, ret = 0; - void *ds; + int error = 0; + + error = -EOPNOTSUPP; + if (!bts_cfg.sizeof_bts) + goto errout; + error = -EIO; if (cfg_size < sizeof(cfg)) - return -EIO; + goto errout; + error = -EFAULT; if (copy_from_user(&cfg, ucfg, sizeof(cfg))) - return -EFAULT; + goto errout; - if ((int)cfg.size < 0) - return -EINVAL; + error = -EINVAL; + if ((cfg.flags & PTRACE_BTS_O_SIGNAL) && + !(cfg.flags & PTRACE_BTS_O_ALLOC)) + goto errout; - bts_size = 0; - ds = (void *)child->thread.ds_area_msr; - if (ds) { - bts_size = ds_get_bts_size(ds); - if (bts_size < 0) - return bts_size; - } - cfg.size = PAGE_ALIGN(cfg.size); + if (cfg.flags & PTRACE_BTS_O_ALLOC) { + ds_ovfl_callback_t ovfl = NULL; + unsigned int sig = 0; + + /* we ignore the error in case we were not tracing child */ + (void)ds_release_bts(child); - if (bts_size != cfg.size) { - ret = ptrace_bts_realloc(child, cfg.size, - cfg.flags & PTRACE_BTS_O_CUT_SIZE); - if (ret < 0) + if (cfg.flags & PTRACE_BTS_O_SIGNAL) { + if (!cfg.signal) + goto errout; + + sig = cfg.signal; + ovfl = ptrace_bts_ovfl; + } + + error = ds_request_bts(child, /* base = */ NULL, cfg.size, ovfl); + if (error < 0) goto errout; - ds = (void *)child->thread.ds_area_msr; + child->thread.bts_ovfl_signal = sig; } - if (cfg.flags & PTRACE_BTS_O_SIGNAL) - ret = ds_set_overflow(ds, DS_O_SIGNAL); - else - ret = ds_set_overflow(ds, DS_O_WRAP); - if (ret < 0) + error = -EINVAL; + if (!child->thread.ds_ctx && cfg.flags) goto errout; if (cfg.flags & PTRACE_BTS_O_TRACE) - child->thread.debugctlmsr |= ds_debugctl_mask(); + child->thread.debugctlmsr |= bts_cfg.debugctl_mask; else - child->thread.debugctlmsr &= ~ds_debugctl_mask(); + child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask; if (cfg.flags & PTRACE_BTS_O_SCHED) set_tsk_thread_flag(child, TIF_BTS_TRACE_TS); else clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); - ret = sizeof(cfg); + error = sizeof(cfg); out: if (child->thread.debugctlmsr) @@ -702,10 +803,10 @@ out: else clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); - return ret; + return error; errout: - child->thread.debugctlmsr &= ~ds_debugctl_mask(); + child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask; clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); goto out; } @@ -714,29 +815,40 @@ static int ptrace_bts_status(struct task_struct *child, long cfg_size, struct ptrace_bts_config __user *ucfg) { - void *ds = (void *)child->thread.ds_area_msr; struct ptrace_bts_config cfg; + size_t end; + const void *base, *max; + int error; if (cfg_size < sizeof(cfg)) return -EIO; - memset(&cfg, 0, sizeof(cfg)); + error = ds_get_bts_end(child, &end); + if (error < 0) + return error; - if (ds) { - cfg.size = ds_get_bts_size(ds); + error = ds_access_bts(child, /* index = */ 0, &base); + if (error < 0) + return error; - if (ds_get_overflow(ds) == DS_O_SIGNAL) - cfg.flags |= PTRACE_BTS_O_SIGNAL; + error = ds_access_bts(child, /* index = */ end, &max); + if (error < 0) + return error; - if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) && - child->thread.debugctlmsr & ds_debugctl_mask()) - cfg.flags |= PTRACE_BTS_O_TRACE; + memset(&cfg, 0, sizeof(cfg)); + cfg.size = (max - base); + cfg.signal = child->thread.bts_ovfl_signal; + cfg.bts_size = sizeof(struct bts_struct); - if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS)) - cfg.flags |= PTRACE_BTS_O_SCHED; - } + if (cfg.signal) + cfg.flags |= PTRACE_BTS_O_SIGNAL; - cfg.bts_size = sizeof(struct bts_struct); + if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) && + child->thread.debugctlmsr & bts_cfg.debugctl_mask) + cfg.flags |= PTRACE_BTS_O_TRACE; + + if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS)) + cfg.flags |= PTRACE_BTS_O_SCHED; if (copy_to_user(ucfg, &cfg, sizeof(cfg))) return -EFAULT; @@ -744,89 +856,38 @@ static int ptrace_bts_status(struct task_struct *child, return sizeof(cfg); } - static int ptrace_bts_write_record(struct task_struct *child, const struct bts_struct *in) { - int retval; + unsigned char bts_record[BTS_MAX_RECORD_SIZE]; - if (!child->thread.ds_area_msr) - return -ENXIO; + BUG_ON(BTS_MAX_RECORD_SIZE < bts_cfg.sizeof_bts); - retval = ds_write_bts((void *)child->thread.ds_area_msr, in); - if (retval) - return retval; + memset(bts_record, 0, bts_cfg.sizeof_bts); + switch (in->qualifier) { + case BTS_INVALID: + break; - return sizeof(*in); -} + case BTS_BRANCH: + bts_set(bts_record, bts_from, in->variant.lbr.from_ip); + bts_set(bts_record, bts_to, in->variant.lbr.to_ip); + break; -static int ptrace_bts_realloc(struct task_struct *child, - int size, int reduce_size) -{ - unsigned long rlim, vm; - int ret, old_size; + case BTS_TASK_ARRIVES: + case BTS_TASK_DEPARTS: + bts_set(bts_record, bts_from, bts_escape); + bts_set(bts_record, bts_qual, in->qualifier); + bts_set(bts_record, bts_jiffies, in->variant.jiffies); + break; - if (size < 0) + default: return -EINVAL; - - old_size = ds_get_bts_size((void *)child->thread.ds_area_msr); - if (old_size < 0) - return old_size; - - ret = ds_free((void **)&child->thread.ds_area_msr); - if (ret < 0) - goto out; - - size >>= PAGE_SHIFT; - old_size >>= PAGE_SHIFT; - - current->mm->total_vm -= old_size; - current->mm->locked_vm -= old_size; - - if (size == 0) - goto out; - - rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; - vm = current->mm->total_vm + size; - if (rlim < vm) { - ret = -ENOMEM; - - if (!reduce_size) - goto out; - - size = rlim - current->mm->total_vm; - if (size <= 0) - goto out; } - rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; - vm = current->mm->locked_vm + size; - if (rlim < vm) { - ret = -ENOMEM; - - if (!reduce_size) - goto out; - - size = rlim - current->mm->locked_vm; - if (size <= 0) - goto out; - } - - ret = ds_allocate((void **)&child->thread.ds_area_msr, - size << PAGE_SHIFT); - if (ret < 0) - goto out; - - current->mm->total_vm += size; - current->mm->locked_vm += size; - -out: - if (child->thread.ds_area_msr) - set_tsk_thread_flag(child, TIF_DS_AREA_MSR); - else - clear_tsk_thread_flag(child, TIF_DS_AREA_MSR); - - return ret; + /* The writing task will be the switched-to task on a context + * switch. It needs to write into the switched-from task's BTS + * buffer. */ + return ds_unchecked_write_bts(child, bts_record, bts_cfg.sizeof_bts); } void ptrace_bts_take_timestamp(struct task_struct *tsk, @@ -839,7 +900,66 @@ void ptrace_bts_take_timestamp(struct task_struct *tsk, ptrace_bts_write_record(tsk, &rec); } -#endif /* X86_BTS */ + +static const struct bts_configuration bts_cfg_netburst = { + .sizeof_bts = sizeof(long) * 3, + .sizeof_field = sizeof(long), + .debugctl_mask = (1<<2)|(1<<3)|(1<<5) +}; + +static const struct bts_configuration bts_cfg_pentium_m = { + .sizeof_bts = sizeof(long) * 3, + .sizeof_field = sizeof(long), + .debugctl_mask = (1<<6)|(1<<7) +}; + +static const struct bts_configuration bts_cfg_core2 = { + .sizeof_bts = 8 * 3, + .sizeof_field = 8, + .debugctl_mask = (1<<6)|(1<<7)|(1<<9) +}; + +static inline void bts_configure(const struct bts_configuration *cfg) +{ + bts_cfg = *cfg; +} + +void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *c) +{ + switch (c->x86) { + case 0x6: + switch (c->x86_model) { + case 0xD: + case 0xE: /* Pentium M */ + bts_configure(&bts_cfg_pentium_m); + break; + case 0xF: /* Core2 */ + case 0x1C: /* Atom */ + bts_configure(&bts_cfg_core2); + break; + default: + /* sorry, don't know about them */ + break; + } + break; + case 0xF: + switch (c->x86_model) { + case 0x0: + case 0x1: + case 0x2: /* Netburst */ + bts_configure(&bts_cfg_netburst); + break; + default: + /* sorry, don't know about them */ + break; + } + break; + default: + /* sorry, don't know about them */ + break; + } +} +#endif /* CONFIG_X86_PTRACE_BTS */ /* * Called by kernel/ptrace.c when detaching.. @@ -852,15 +972,15 @@ void ptrace_disable(struct task_struct *child) #ifdef TIF_SYSCALL_EMU clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); #endif - if (child->thread.ds_area_msr) { -#ifdef X86_BTS - ptrace_bts_realloc(child, 0, 0); -#endif - child->thread.debugctlmsr &= ~ds_debugctl_mask(); - if (!child->thread.debugctlmsr) - clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); - clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); - } +#ifdef CONFIG_X86_PTRACE_BTS + (void)ds_release_bts(child); + + child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask; + if (!child->thread.debugctlmsr) + clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); + + clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); +#endif /* CONFIG_X86_PTRACE_BTS */ } #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION @@ -943,13 +1063,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return copy_regset_to_user(child, &user_x86_32_view, REGSET_XFP, 0, sizeof(struct user_fxsr_struct), - datap); + datap) ? -EIO : 0; case PTRACE_SETFPXREGS: /* Set the child extended FPU state. */ return copy_regset_from_user(child, &user_x86_32_view, REGSET_XFP, 0, sizeof(struct user_fxsr_struct), - datap); + datap) ? -EIO : 0; #endif #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION @@ -980,7 +1100,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) /* * These bits need more cooking - not enabled yet: */ -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS case PTRACE_BTS_CONFIG: ret = ptrace_bts_config (child, data, (struct ptrace_bts_config __user *)addr); @@ -992,7 +1112,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case PTRACE_BTS_SIZE: - ret = ptrace_bts_get_size(child); + ret = ds_get_bts_index(child, /* pos = */ NULL); break; case PTRACE_BTS_GET: @@ -1001,14 +1121,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case PTRACE_BTS_CLEAR: - ret = ptrace_bts_clear(child); + ret = ds_clear_bts(child); break; case PTRACE_BTS_DRAIN: ret = ptrace_bts_drain (child, data, (struct bts_struct __user *) addr); break; -#endif +#endif /* CONFIG_X86_PTRACE_BTS */ default: ret = ptrace_request(child, request, addr, data); @@ -1290,6 +1410,12 @@ static const struct user_regset x86_64_regsets[] = { .size = sizeof(long), .align = sizeof(long), .active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set }, + [REGSET_IOPERM64] = { + .core_note_type = NT_386_IOPERM, + .n = IO_BITMAP_LONGS, + .size = sizeof(long), .align = sizeof(long), + .active = ioperm_active, .get = ioperm_get + }, }; static const struct user_regset_view user_x86_64_view = { @@ -1336,6 +1462,12 @@ static const struct user_regset x86_32_regsets[] = { .active = regset_tls_active, .get = regset_tls_get, .set = regset_tls_set }, + [REGSET_IOPERM32] = { + .core_note_type = NT_386_IOPERM, + .n = IO_BITMAP_BYTES / sizeof(u32), + .size = sizeof(u32), .align = sizeof(u32), + .active = ioperm_active, .get = ioperm_get + }, }; static const struct user_regset_view user_x86_32_view = { @@ -1357,9 +1489,8 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task) #endif } -#ifdef CONFIG_X86_32 - -void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) +void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, + int error_code, int si_code) { struct siginfo info; @@ -1368,7 +1499,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) memset(&info, 0, sizeof(info)); info.si_signo = SIGTRAP; - info.si_code = TRAP_BRKPT; + info.si_code = si_code; /* User-mode ip? */ info.si_addr = user_mode_vm(regs) ? (void __user *) regs->ip : NULL; @@ -1377,143 +1508,83 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) force_sig_info(SIGTRAP, &info, tsk); } -/* notification of system call entry/exit - * - triggered by current->work.syscall_trace - */ -int do_syscall_trace(struct pt_regs *regs, int entryexit) -{ - int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU); - /* - * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall - * interception - */ - int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP); - int ret = 0; - /* do the secure computing check first */ - if (!entryexit) - secure_computing(regs->orig_ax); - - if (unlikely(current->audit_context)) { - if (entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->ax), - regs->ax); - /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only - * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is - * not used, entry.S will call us only on syscall exit, not - * entry; so when TIF_SYSCALL_AUDIT is used we must avoid - * calling send_sigtrap() on syscall entry. - * - * Note that when PTRACE_SYSEMU_SINGLESTEP is used, - * is_singlestep is false, despite his name, so we will still do - * the correct thing. - */ - else if (is_singlestep) - goto out; - } - - if (!(current->ptrace & PT_PTRACED)) - goto out; - - /* If a process stops on the 1st tracepoint with SYSCALL_TRACE - * and then is resumed with SYSEMU_SINGLESTEP, it will come in - * here. We have to check this and return */ - if (is_sysemu && entryexit) - return 0; - - /* Fake a debug trap */ - if (is_singlestep) - send_sigtrap(current, regs, 0); - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu) - goto out; - - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - /* Note that the debugger could change the result of test_thread_flag!*/ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } - ret = is_sysemu; -out: - if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_ax, - regs->bx, regs->cx, regs->dx, regs->si); - if (ret == 0) - return 0; - - regs->orig_ax = -1; /* force skip of syscall restarting */ - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); - return 1; -} - -#else /* CONFIG_X86_64 */ +#ifdef CONFIG_X86_32 +# define IS_IA32 1 +#elif defined CONFIG_IA32_EMULATION +# define IS_IA32 test_thread_flag(TIF_IA32) +#else +# define IS_IA32 0 +#endif -static void syscall_trace(struct pt_regs *regs) +/* + * We must return the syscall number to actually look up in the table. + * This can be -1L to skip running any syscall at all. + */ +asmregparm long syscall_trace_enter(struct pt_regs *regs) { + long ret = 0; -#if 0 - printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n", - current->comm, - regs->ip, regs->sp, regs->ax, regs->orig_ax, __builtin_return_address(0), - current_thread_info()->flags, current->ptrace); -#endif - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl + * If we stepped into a sysenter/syscall insn, it trapped in + * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP. + * If user-mode had set TF itself, then it's still clear from + * do_debug() and we need to set it again to restore the user + * state. If we entered on the slow path, TF was already set. */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} + if (test_thread_flag(TIF_SINGLESTEP)) + regs->flags |= X86_EFLAGS_TF; -asmlinkage void syscall_trace_enter(struct pt_regs *regs) -{ /* do the secure computing check first */ secure_computing(regs->orig_ax); - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - syscall_trace(regs); + if (unlikely(test_thread_flag(TIF_SYSCALL_EMU))) + ret = -1L; + + if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) && + tracehook_report_syscall_entry(regs)) + ret = -1L; if (unlikely(current->audit_context)) { - if (test_thread_flag(TIF_IA32)) { + if (IS_IA32) audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_ax, regs->bx, regs->cx, regs->dx, regs->si); - } else { +#ifdef CONFIG_X86_64 + else audit_syscall_entry(AUDIT_ARCH_X86_64, regs->orig_ax, regs->di, regs->si, regs->dx, regs->r10); - } +#endif } + + return ret ?: regs->orig_ax; } -asmlinkage void syscall_trace_leave(struct pt_regs *regs) +asmregparm void syscall_trace_leave(struct pt_regs *regs) { if (unlikely(current->audit_context)) audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); - if ((test_thread_flag(TIF_SYSCALL_TRACE) - || test_thread_flag(TIF_SINGLESTEP)) - && (current->ptrace & PT_PTRACED)) - syscall_trace(regs); -} + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, 0); -#endif /* CONFIG_X86_32 */ + /* + * If TIF_SYSCALL_EMU is set, we only get here because of + * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP). + * We already reported this syscall instruction in + * syscall_trace_enter(), so don't do any more now. + */ + if (unlikely(test_thread_flag(TIF_SYSCALL_EMU))) + return; + + /* + * If we are single-stepping, synthesize a trap to follow the + * system call instruction. + */ + if (test_thread_flag(TIF_SINGLESTEP) && + tracehook_consider_fatal_signal(current, SIGTRAP, SIG_DFL)) + send_sigtrap(current, regs, 0, TRAP_BRKPT); +} diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c new file mode 100644 index 00000000000..05fbe9a0325 --- /dev/null +++ b/arch/x86/kernel/pvclock.c @@ -0,0 +1,141 @@ +/* paravirtual clock -- common code used by kvm/xen + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <linux/kernel.h> +#include <linux/percpu.h> +#include <asm/pvclock.h> + +/* + * These are perodically updated + * xen: magic shared_info page + * kvm: gpa registered via msr + * and then copied here. + */ +struct pvclock_shadow_time { + u64 tsc_timestamp; /* TSC at last update of time vals. */ + u64 system_timestamp; /* Time, in nanosecs, since boot. */ + u32 tsc_to_nsec_mul; + int tsc_shift; + u32 version; +}; + +/* + * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, + * yielding a 64-bit result. + */ +static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) +{ + u64 product; +#ifdef __i386__ + u32 tmp1, tmp2; +#endif + + if (shift < 0) + delta >>= -shift; + else + delta <<= shift; + +#ifdef __i386__ + __asm__ ( + "mul %5 ; " + "mov %4,%%eax ; " + "mov %%edx,%4 ; " + "mul %5 ; " + "xor %5,%5 ; " + "add %4,%%eax ; " + "adc %5,%%edx ; " + : "=A" (product), "=r" (tmp1), "=r" (tmp2) + : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); +#elif __x86_64__ + __asm__ ( + "mul %%rdx ; shrd $32,%%rdx,%%rax" + : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); +#else +#error implement me! +#endif + + return product; +} + +static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow) +{ + u64 delta = native_read_tsc() - shadow->tsc_timestamp; + return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); +} + +/* + * Reads a consistent set of time-base values from hypervisor, + * into a shadow data area. + */ +static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst, + struct pvclock_vcpu_time_info *src) +{ + do { + dst->version = src->version; + rmb(); /* fetch version before data */ + dst->tsc_timestamp = src->tsc_timestamp; + dst->system_timestamp = src->system_time; + dst->tsc_to_nsec_mul = src->tsc_to_system_mul; + dst->tsc_shift = src->tsc_shift; + rmb(); /* test version after fetching data */ + } while ((src->version & 1) || (dst->version != src->version)); + + return dst->version; +} + +cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) +{ + struct pvclock_shadow_time shadow; + unsigned version; + cycle_t ret, offset; + + do { + version = pvclock_get_time_values(&shadow, src); + barrier(); + offset = pvclock_get_nsec_offset(&shadow); + ret = shadow.system_timestamp + offset; + barrier(); + } while (version != src->version); + + return ret; +} + +void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock, + struct pvclock_vcpu_time_info *vcpu_time, + struct timespec *ts) +{ + u32 version; + u64 delta; + struct timespec now; + + /* get wallclock at system boot */ + do { + version = wall_clock->version; + rmb(); /* fetch version before time */ + now.tv_sec = wall_clock->sec; + now.tv_nsec = wall_clock->nsec; + rmb(); /* fetch time before checking version */ + } while ((wall_clock->version & 1) || (version != wall_clock->version)); + + delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */ + delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; + + now.tv_nsec = do_div(delta, NSEC_PER_SEC); + now.tv_sec = delta; + + set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); +} diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe71..d1385881810 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -158,6 +159,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, + ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, @@ -174,6 +177,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -253,8 +262,12 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, + old_ich_force_enable_hpet_user); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, old_ich_force_enable_hpet_user); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, @@ -290,9 +303,14 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) return; + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + pci_read_config_dword(dev, 0x68, &val); /* * Bit 7 is HPET enable bit. @@ -330,6 +348,36 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -343,8 +391,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); @@ -397,6 +450,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5f82f..f4c93f1cfc1 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,9 +27,13 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; -enum reboot_type reboot_type = BOOT_KBD; +/* + * Keyboard reset and triple fault may result in INIT, not RESET, which + * doesn't work when we're in vmx root mode. Try ACPI first. + */ +enum reboot_type reboot_type = BOOT_ACPI; int reboot_force; #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) @@ -177,6 +181,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), }, }, + { /* Handle problems with rebooting on Dell T5400's */ + .callback = set_bios_reboot, + .ident = "Dell Precision T5400", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"), + }, + }, { /* Handle problems with rebooting on HP laptops */ .callback = set_bios_reboot, .ident = "HP Compaq Laptop", @@ -201,15 +213,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +243,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +257,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +267,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +380,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; @@ -403,10 +415,9 @@ void native_machine_shutdown(void) { /* Stop the cpus and apics */ #ifdef CONFIG_SMP - int reboot_cpu_id; /* The boot cpu is always logical cpu 0 */ - reboot_cpu_id = 0; + int reboot_cpu_id = 0; #ifdef CONFIG_X86_32 /* See if there has been given a command line override */ diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5ec25c..61a837743fe 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S index c30fe25d470..6f50664b2ba 100644 --- a/arch/x86/kernel/relocate_kernel_32.S +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -20,11 +20,45 @@ #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) #define PAE_PGD_ATTR (_PAGE_PRESENT) +/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE + * ~ control_page + PAGE_SIZE are used as data storage and stack for + * jumping back + */ +#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset)) + +/* Minimal CPU state */ +#define ESP DATA(0x0) +#define CR0 DATA(0x4) +#define CR3 DATA(0x8) +#define CR4 DATA(0xc) + +/* other data */ +#define CP_VA_CONTROL_PAGE DATA(0x10) +#define CP_PA_PGD DATA(0x14) +#define CP_PA_SWAP_PAGE DATA(0x18) +#define CP_PA_BACKUP_PAGES_MAP DATA(0x1c) + .text .align PAGE_SIZE .globl relocate_kernel relocate_kernel: - movl 8(%esp), %ebp /* list of pages */ + /* Save the CPU context, used for jumping back */ + + pushl %ebx + pushl %esi + pushl %edi + pushl %ebp + pushf + + movl 20+8(%esp), %ebp /* list of pages */ + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi + movl %esp, ESP(%edi) + movl %cr0, %eax + movl %eax, CR0(%edi) + movl %cr3, %eax + movl %eax, CR3(%edi) + movl %cr4, %eax + movl %eax, CR4(%edi) #ifdef CONFIG_X86_PAE /* map the control page at its virtual address */ @@ -138,15 +172,25 @@ relocate_kernel: relocate_new_kernel: /* read the arguments and say goodbye to the stack */ - movl 4(%esp), %ebx /* page_list */ - movl 8(%esp), %ebp /* list of pages */ - movl 12(%esp), %edx /* start address */ - movl 16(%esp), %ecx /* cpu_has_pae */ + movl 20+4(%esp), %ebx /* page_list */ + movl 20+8(%esp), %ebp /* list of pages */ + movl 20+12(%esp), %edx /* start address */ + movl 20+16(%esp), %ecx /* cpu_has_pae */ + movl 20+20(%esp), %esi /* preserve_context */ /* zero out flags, and disable interrupts */ pushl $0 popfl + /* save some information for jumping back */ + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi + movl %edi, CP_VA_CONTROL_PAGE(%edi) + movl PTR(PA_PGD)(%ebp), %eax + movl %eax, CP_PA_PGD(%edi) + movl PTR(PA_SWAP_PAGE)(%ebp), %eax + movl %eax, CP_PA_SWAP_PAGE(%edi) + movl %ebx, CP_PA_BACKUP_PAGES_MAP(%edi) + /* get physical address of control page now */ /* this is impossible after page table switch */ movl PTR(PA_CONTROL_PAGE)(%ebp), %edi @@ -197,8 +241,90 @@ identity_mapped: xorl %eax, %eax movl %eax, %cr3 + movl CP_PA_SWAP_PAGE(%edi), %eax + pushl %eax + pushl %ebx + call swap_pages + addl $8, %esp + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB, it's handy, and not processor dependent. + */ + xorl %eax, %eax + movl %eax, %cr3 + + /* set all of the registers to known values */ + /* leave %esp alone */ + + testl %esi, %esi + jnz 1f + xorl %edi, %edi + xorl %eax, %eax + xorl %ebx, %ebx + xorl %ecx, %ecx + xorl %edx, %edx + xorl %esi, %esi + xorl %ebp, %ebp + ret +1: + popl %edx + movl CP_PA_SWAP_PAGE(%edi), %esp + addl $PAGE_SIZE, %esp +2: + call *%edx + + /* get the re-entry point of the peer system */ + movl 0(%esp), %ebp + call 1f +1: + popl %ebx + subl $(1b - relocate_kernel), %ebx + movl CP_VA_CONTROL_PAGE(%ebx), %edi + lea PAGE_SIZE(%ebx), %esp + movl CP_PA_SWAP_PAGE(%ebx), %eax + movl CP_PA_BACKUP_PAGES_MAP(%ebx), %edx + pushl %eax + pushl %edx + call swap_pages + addl $8, %esp + movl CP_PA_PGD(%ebx), %eax + movl %eax, %cr3 + movl %cr0, %eax + orl $(1<<31), %eax + movl %eax, %cr0 + lea PAGE_SIZE(%edi), %esp + movl %edi, %eax + addl $(virtual_mapped - relocate_kernel), %eax + pushl %eax + ret + +virtual_mapped: + movl CR4(%edi), %eax + movl %eax, %cr4 + movl CR3(%edi), %eax + movl %eax, %cr3 + movl CR0(%edi), %eax + movl %eax, %cr0 + movl ESP(%edi), %esp + movl %ebp, %eax + + popf + popl %ebp + popl %edi + popl %esi + popl %ebx + ret + /* Do the copies */ - movl %ebx, %ecx +swap_pages: + movl 8(%esp), %edx + movl 4(%esp), %ecx + pushl %ebp + pushl %ebx + pushl %edi + pushl %esi + movl %ecx, %ebx jmp 1f 0: /* top, read another word from the indirection page */ @@ -226,27 +352,31 @@ identity_mapped: movl %ecx, %esi /* For every source page do a copy */ andl $0xfffff000, %esi + movl %edi, %eax + movl %esi, %ebp + + movl %edx, %edi movl $1024, %ecx rep ; movsl - jmp 0b - -3: - /* To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB, it's handy, and not processor dependent. - */ - xorl %eax, %eax - movl %eax, %cr3 + movl %ebp, %edi + movl %eax, %esi + movl $1024, %ecx + rep ; movsl - /* set all of the registers to known values */ - /* leave %esp alone */ + movl %eax, %edi + movl %edx, %esi + movl $1024, %ecx + rep ; movsl - xorl %eax, %eax - xorl %ebx, %ebx - xorl %ecx, %ecx - xorl %edx, %edx - xorl %esi, %esi - xorl %edi, %edi - xorl %ebp, %ebp + lea PAGE_SIZE(%ebp), %esi + jmp 0b +3: + popl %esi + popl %edi + popl %ebx + popl %ebp ret + + .globl kexec_control_code_size +.set kexec_control_code_size, . - relocate_kernel diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 6f80b852a19..21b8e0a5978 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1,139 +1,1097 @@ -#include <linux/kernel.h> +/* + * Copyright (C) 1995 Linus Torvalds + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + * + * Memory region support + * David Parsons <orc@pell.chi.il.us>, July-August 1999 + * + * Added E820 sanitization routine (removes overlapping memory regions); + * Brian Moyle <bmoyle@mvista.com>, February 2001 + * + * Moved CPU detection code to cpu/${cpu}.c + * Patrick Mochel <mochel@osdl.org>, March 2002 + * + * Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach <xela@slit.de>, December 2002. + * + */ + +/* + * This file handles the architecture-dependent parts of initialization + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/mmzone.h> +#include <linux/screen_info.h> +#include <linux/ioport.h> +#include <linux/acpi.h> +#include <linux/apm_bios.h> +#include <linux/initrd.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/console.h> +#include <linux/mca.h> +#include <linux/root_dev.h> +#include <linux/highmem.h> #include <linux/module.h> +#include <linux/efi.h> #include <linux/init.h> -#include <linux/bootmem.h> +#include <linux/edd.h> +#include <linux/iscsi_ibft.h> +#include <linux/nodemask.h> +#include <linux/kexec.h> +#include <linux/dmi.h> +#include <linux/pfn.h> +#include <linux/pci.h> +#include <asm/pci-direct.h> +#include <linux/init_ohci1394_dma.h> +#include <linux/kvm_para.h> + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/delay.h> + +#include <linux/kallsyms.h> +#include <linux/cpufreq.h> +#include <linux/dma-mapping.h> +#include <linux/ctype.h> +#include <linux/uaccess.h> + #include <linux/percpu.h> -#include <asm/smp.h> -#include <asm/percpu.h> +#include <linux/crash_dump.h> + +#include <video/edid.h> + +#include <asm/mtrr.h> +#include <asm/apic.h> +#include <asm/e820.h> +#include <asm/mpspec.h> +#include <asm/setup.h> +#include <asm/arch_hooks.h> +#include <asm/efi.h> #include <asm/sections.h> +#include <asm/dmi.h> +#include <asm/io_apic.h> +#include <asm/ist.h> +#include <asm/vmi.h> +#include <setup_arch.h> +#include <asm/bios_ebda.h> +#include <asm/cacheflush.h> #include <asm/processor.h> -#include <asm/setup.h> +#include <asm/bugs.h> + +#include <asm/system.h> +#include <asm/vsyscall.h> +#include <asm/smp.h> +#include <asm/desc.h> +#include <asm/dma.h> +#include <asm/iommu.h> +#include <asm/mmu_context.h> +#include <asm/proto.h> + +#include <mach_apic.h> +#include <asm/paravirt.h> + +#include <asm/percpu.h> #include <asm/topology.h> -#include <asm/mpspec.h> #include <asm/apicdef.h> +#ifdef CONFIG_X86_64 +#include <asm/numa_64.h> +#endif -#ifdef CONFIG_X86_LOCAL_APIC -unsigned int num_processors; -unsigned disabled_cpus __cpuinitdata; -/* Processor that is doing the boot up */ -unsigned int boot_cpu_physical_apicid = -1U; -EXPORT_SYMBOL(boot_cpu_physical_apicid); +#ifndef ARCH_SETUP +#define ARCH_SETUP +#endif + +#ifndef CONFIG_DEBUG_BOOT_PARAMS +struct boot_params __initdata boot_params; +#else +struct boot_params boot_params; +#endif + +/* + * Machine setup.. + */ +static struct resource data_resource = { + .name = "Kernel data", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource code_resource = { + .name = "Kernel code", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource bss_resource = { + .name = "Kernel bss", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + + +#ifdef CONFIG_X86_32 +/* This value is set up by the early boot code to point to the value + immediately after the boot time page tables. It contains a *physical* + address, and must not be in the .bss segment! */ +unsigned long init_pg_tables_start __initdata = ~0UL; +unsigned long init_pg_tables_end __initdata = ~0UL; + +static struct resource video_ram_resource = { + .name = "Video RAM area", + .start = 0xa0000, + .end = 0xbffff, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; -DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid); +/* cpu data as detected by the assembly code in head.S */ +struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1}; +/* common cpu data for all cpus */ +struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1}; +EXPORT_SYMBOL(boot_cpu_data); +static void set_mca_bus(int x) +{ +#ifdef CONFIG_MCA + MCA_bus = x; +#endif +} + +unsigned int def_to_bigsmp; + +/* for MCA, but anyone else can use it if they want */ +unsigned int machine_id; +unsigned int machine_submodel_id; +unsigned int BIOS_revision; + +struct apm_info apm_info; +EXPORT_SYMBOL(apm_info); -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map; +#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ + defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) +struct ist_info ist_info; +EXPORT_SYMBOL(ist_info); +#else +struct ist_info ist_info; #endif -#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) +#else +struct cpuinfo_x86 boot_cpu_data __read_mostly; +EXPORT_SYMBOL(boot_cpu_data); +#endif + + +#if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64) +unsigned long mmu_cr4_features; +#else +unsigned long mmu_cr4_features = X86_CR4_PAE; +#endif + +/* Boot loader ID as an integer, for the benefit of proc_dointvec */ +int bootloader_type; + +/* + * Early DMI memory + */ +int dmi_alloc_index; +char dmi_alloc_data[DMI_MAX_DATA]; + /* - * Copy data used in early init routines from the initial arrays to the - * per cpu data areas. These arrays then become expendable and the - * *_early_ptr's are zeroed indicating that the static arrays are gone. + * Setup options + */ +struct screen_info screen_info; +EXPORT_SYMBOL(screen_info); +struct edid_info edid_info; +EXPORT_SYMBOL_GPL(edid_info); + +extern int root_mountflags; + +unsigned long saved_video_mode; + +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + +static char __initdata command_line[COMMAND_LINE_SIZE]; +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) +struct edd edd; +#ifdef CONFIG_EDD_MODULE +EXPORT_SYMBOL(edd); +#endif +/** + * copy_edd() - Copy the BIOS EDD information + * from boot_params into a safe place. + * */ -static void __init setup_per_cpu_maps(void) +static inline void copy_edd(void) +{ + memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer, + sizeof(edd.mbr_signature)); + memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info)); + edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries; + edd.edd_info_nr = boot_params.eddbuf_entries; +} +#else +static inline void copy_edd(void) +{ +} +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + +#ifdef CONFIG_X86_32 + +#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT) +static void __init relocate_initrd(void) +{ + + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT; + u64 ramdisk_here; + unsigned long slop, clen, mapaddr; + char *p, *q; + + /* We need to move the initrd down into lowmem */ + ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size, + PAGE_SIZE); + + if (ramdisk_here == -1ULL) + panic("Cannot find place for new RAMDISK of size %lld\n", + ramdisk_size); + + /* Note: this includes all the lowmem currently occupied by + the initrd, we rely on that fact to keep the data intact. */ + reserve_early(ramdisk_here, ramdisk_here + ramdisk_size, + "NEW RAMDISK"); + initrd_start = ramdisk_here + PAGE_OFFSET; + initrd_end = initrd_start + ramdisk_size; + printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", + ramdisk_here, ramdisk_here + ramdisk_size); + + q = (char *)initrd_start; + + /* Copy any lowmem portion of the initrd */ + if (ramdisk_image < end_of_lowmem) { + clen = end_of_lowmem - ramdisk_image; + p = (char *)__va(ramdisk_image); + memcpy(q, p, clen); + q += clen; + ramdisk_image += clen; + ramdisk_size -= clen; + } + + /* Copy the highmem portion of the initrd */ + while (ramdisk_size) { + slop = ramdisk_image & ~PAGE_MASK; + clen = ramdisk_size; + if (clen > MAX_MAP_CHUNK-slop) + clen = MAX_MAP_CHUNK-slop; + mapaddr = ramdisk_image & PAGE_MASK; + p = early_ioremap(mapaddr, clen+slop); + memcpy(q, p+slop, clen); + early_iounmap(p, clen+slop); + q += clen; + ramdisk_image += clen; + ramdisk_size -= clen; + } + /* high pages is not converted by early_res_to_bootmem */ + ramdisk_image = boot_params.hdr.ramdisk_image; + ramdisk_size = boot_params.hdr.ramdisk_size; + printk(KERN_INFO "Move RAMDISK from %016llx - %016llx to" + " %08llx - %08llx\n", + ramdisk_image, ramdisk_image + ramdisk_size - 1, + ramdisk_here, ramdisk_here + ramdisk_size - 1); +} +#endif + +static void __init reserve_initrd(void) { - int cpu; + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT; + + if (!boot_params.hdr.type_of_loader || + !ramdisk_image || !ramdisk_size) + return; /* No initrd provided by bootloader */ + + initrd_start = 0; + + if (ramdisk_size >= (end_of_lowmem>>1)) { + free_early(ramdisk_image, ramdisk_end); + printk(KERN_ERR "initrd too large to handle, " + "disabling initrd\n"); + return; + } - for_each_possible_cpu(cpu) { - per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu]; - per_cpu(x86_bios_cpu_apicid, cpu) = - x86_bios_cpu_apicid_init[cpu]; -#ifdef CONFIG_NUMA - per_cpu(x86_cpu_to_node_map, cpu) = - x86_cpu_to_node_map_init[cpu]; + printk(KERN_INFO "RAMDISK: %08llx - %08llx\n", ramdisk_image, + ramdisk_end); + + + if (ramdisk_end <= end_of_lowmem) { + /* All in lowmem, easy case */ + /* + * don't need to reserve again, already reserved early + * in i386_start_kernel + */ + initrd_start = ramdisk_image + PAGE_OFFSET; + initrd_end = initrd_start + ramdisk_size; + return; + } + +#ifdef CONFIG_X86_32 + relocate_initrd(); +#else + printk(KERN_ERR "initrd extends beyond end of memory " + "(0x%08llx > 0x%08llx)\ndisabling initrd\n", + ramdisk_end, end_of_lowmem); + initrd_start = 0; #endif + free_early(ramdisk_image, ramdisk_end); +} +#else +static void __init reserve_initrd(void) +{ +} +#endif /* CONFIG_BLK_DEV_INITRD */ + +static void __init parse_setup_data(void) +{ + struct setup_data *data; + u64 pa_data; + + if (boot_params.hdr.version < 0x0209) + return; + pa_data = boot_params.hdr.setup_data; + while (pa_data) { + data = early_ioremap(pa_data, PAGE_SIZE); + switch (data->type) { + case SETUP_E820_EXT: + parse_e820_ext(data, pa_data); + break; + default: + break; + } + pa_data = data->next; + early_iounmap(data, PAGE_SIZE); + } +} + +static void __init e820_reserve_setup_data(void) +{ + struct setup_data *data; + u64 pa_data; + int found = 0; + + if (boot_params.hdr.version < 0x0209) + return; + pa_data = boot_params.hdr.setup_data; + while (pa_data) { + data = early_ioremap(pa_data, sizeof(*data)); + e820_update_range(pa_data, sizeof(*data)+data->len, + E820_RAM, E820_RESERVED_KERN); + found = 1; + pa_data = data->next; + early_iounmap(data, sizeof(*data)); + } + if (!found) + return; + + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + memcpy(&e820_saved, &e820, sizeof(struct e820map)); + printk(KERN_INFO "extended physical RAM map:\n"); + e820_print_map("reserve setup_data"); +} + +static void __init reserve_early_setup_data(void) +{ + struct setup_data *data; + u64 pa_data; + char buf[32]; + + if (boot_params.hdr.version < 0x0209) + return; + pa_data = boot_params.hdr.setup_data; + while (pa_data) { + data = early_ioremap(pa_data, sizeof(*data)); + sprintf(buf, "setup data %x", data->type); + reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); + pa_data = data->next; + early_iounmap(data, sizeof(*data)); + } +} + +/* + * --------- Crashkernel reservation ------------------------------ + */ + +#ifdef CONFIG_KEXEC + +/** + * Reserve @size bytes of crashkernel memory at any suitable offset. + * + * @size: Size of the crashkernel memory to reserve. + * Returns the base address on success, and -1ULL on failure. + */ +unsigned long long __init find_and_reserve_crashkernel(unsigned long long size) +{ + const unsigned long long alignment = 16<<20; /* 16M */ + unsigned long long start = 0LL; + + while (1) { + int ret; + + start = find_e820_area(start, ULONG_MAX, size, alignment); + if (start == -1ULL) + return start; + + /* try to reserve it */ + ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE); + if (ret >= 0) + return start; + + start += alignment; } +} - /* indicate the early static arrays will soon be gone */ - x86_cpu_to_apicid_early_ptr = NULL; - x86_bios_cpu_apicid_early_ptr = NULL; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = NULL; +static inline unsigned long long get_total_mem(void) +{ + unsigned long long total; + + total = max_low_pfn - min_low_pfn; +#ifdef CONFIG_HIGHMEM + total += highend_pfn - highstart_pfn; #endif + + return total << PAGE_SHIFT; +} + +static void __init reserve_crashkernel(void) +{ + unsigned long long total_mem; + unsigned long long crash_size, crash_base; + int ret; + + total_mem = get_total_mem(); + + ret = parse_crashkernel(boot_command_line, total_mem, + &crash_size, &crash_base); + if (ret != 0 || crash_size <= 0) + return; + + /* 0 means: find the address automatically */ + if (crash_base <= 0) { + crash_base = find_and_reserve_crashkernel(crash_size); + if (crash_base == -1ULL) { + pr_info("crashkernel reservation failed. " + "No suitable area found.\n"); + return; + } + } else { + ret = reserve_bootmem_generic(crash_base, crash_size, + BOOTMEM_EXCLUSIVE); + if (ret < 0) { + pr_info("crashkernel reservation failed - " + "memory is in use\n"); + return; + } + } + + printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " + "for crashkernel (System RAM: %ldMB)\n", + (unsigned long)(crash_size >> 20), + (unsigned long)(crash_base >> 20), + (unsigned long)(total_mem >> 20)); + + crashk_res.start = crash_base; + crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); +} +#else +static void __init reserve_crashkernel(void) +{ } +#endif -#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP -cpumask_t *cpumask_of_cpu_map __read_mostly; -EXPORT_SYMBOL(cpumask_of_cpu_map); +static struct resource standard_io_resources[] = { + { .name = "dma1", .start = 0x00, .end = 0x1f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "pic1", .start = 0x20, .end = 0x21, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "timer0", .start = 0x40, .end = 0x43, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "timer1", .start = 0x50, .end = 0x53, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "keyboard", .start = 0x60, .end = 0x60, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "keyboard", .start = 0x64, .end = 0x64, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "dma page reg", .start = 0x80, .end = 0x8f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "pic2", .start = 0xa0, .end = 0xa1, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "dma2", .start = 0xc0, .end = 0xdf, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "fpu", .start = 0xf0, .end = 0xff, + .flags = IORESOURCE_BUSY | IORESOURCE_IO } +}; -/* requires nr_cpu_ids to be initialized */ -static void __init setup_cpumask_of_cpu(void) +static void __init reserve_standard_io_resources(void) { int i; - /* alloc_bootmem zeroes memory */ - cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids); - for (i = 0; i < nr_cpu_ids; i++) - cpu_set(i, cpumask_of_cpu_map[i]); + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) + request_resource(&ioport_resource, &standard_io_resources[i]); + } -#else -static inline void setup_cpumask_of_cpu(void) { } + +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. This option will be passed + * by kexec loader to the capture kernel. + */ +static int __init setup_elfcorehdr(char *arg) +{ + char *end; + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &end); + return end > arg ? 0 : -EINVAL; +} +early_param("elfcorehdr", setup_elfcorehdr); #endif -#ifdef CONFIG_X86_32 +static struct x86_quirks default_x86_quirks __initdata; + +struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; + /* - * Great future not-so-futuristic plan: make i386 and x86_64 do it - * the same way + * Some BIOSes seem to corrupt the low 64k of memory during events + * like suspend/resume and unplugging an HDMI cable. Reserve all + * remaining free memory in that area and fill it with a distinct + * pattern. */ -unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; -EXPORT_SYMBOL(__per_cpu_offset); +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION +#define MAX_SCAN_AREAS 8 + +static int __read_mostly memory_corruption_check = -1; + +static unsigned __read_mostly corruption_check_size = 64*1024; +static unsigned __read_mostly corruption_check_period = 60; /* seconds */ + +static struct e820entry scan_areas[MAX_SCAN_AREAS]; +static int num_scan_areas; + + +static int set_corruption_check(char *arg) +{ + char *end; + + memory_corruption_check = simple_strtol(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check", set_corruption_check); + +static int set_corruption_check_period(char *arg) +{ + char *end; + + corruption_check_period = simple_strtoul(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_period", set_corruption_check_period); + +static int set_corruption_check_size(char *arg) +{ + char *end; + unsigned size; + + size = memparse(arg, &end); + + if (*end == '\0') + corruption_check_size = size; + + return (size == corruption_check_size) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_size", set_corruption_check_size); + + +static void __init setup_bios_corruption_check(void) +{ + u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ + + if (memory_corruption_check == -1) { + memory_corruption_check = +#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + 1 +#else + 0 +#endif + ; + } + + if (corruption_check_size == 0) + memory_corruption_check = 0; + + if (!memory_corruption_check) + return; + + corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); + + while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { + u64 size; + addr = find_e820_area_size(addr, &size, PAGE_SIZE); + + if (addr == 0) + break; + + if ((addr + size) > corruption_check_size) + size = corruption_check_size - addr; + + if (size == 0) + break; + + e820_update_range(addr, size, E820_RAM, E820_RESERVED); + scan_areas[num_scan_areas].addr = addr; + scan_areas[num_scan_areas].size = size; + num_scan_areas++; + + /* Assume we've already mapped this early memory */ + memset(__va(addr), 0, size); + + addr += size; + } + + printk(KERN_INFO "Scanning %d areas for low memory corruption\n", + num_scan_areas); + update_e820(); +} + +static struct timer_list periodic_check_timer; + +void check_for_bios_corruption(void) +{ + int i; + int corruption = 0; + + if (!memory_corruption_check) + return; + + for(i = 0; i < num_scan_areas; i++) { + unsigned long *addr = __va(scan_areas[i].addr); + unsigned long size = scan_areas[i].size; + + for(; size; addr++, size -= sizeof(unsigned long)) { + if (!*addr) + continue; + printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n", + addr, __pa(addr), *addr); + corruption = 1; + *addr = 0; + } + } + + WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n"); +} + +static void periodic_check_for_corruption(unsigned long data) +{ + check_for_bios_corruption(); + mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ)); +} + +void start_periodic_check_for_corruption(void) +{ + if (!memory_corruption_check || corruption_check_period == 0) + return; + + printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n", + corruption_check_period); + + init_timer(&periodic_check_timer); + periodic_check_timer.function = &periodic_check_for_corruption; + periodic_check_for_corruption(0); +} #endif +static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE + "%s detected: BIOS may corrupt low RAM, working it around.\n", + d->ident); + + e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + + return 0; +} + +/* List of systems that have known low memory corruption BIOS problems */ +static struct dmi_system_id __initdata bad_bios_dmi_table[] = { +#ifdef CONFIG_X86_RESERVE_LOW_64K + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + }, + }, + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + }, + }, +#endif + {} +}; + +/* + * Determine if we were loaded by an EFI loader. If so, then we have also been + * passed the efi memmap, systab, etc., so we should use these data structures + * for initialization. Note, the efi init code path is determined by the + * global efi_enabled. This allows the same kernel image to be used on existing + * systems (with a traditional BIOS) as well as on EFI systems. + */ /* - * Great future plan: - * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. - * Always point %gs to its beginning + * setup_arch - architecture-specific boot-time initializations + * + * Note: On x86_64, fixmaps are ready for use even before this is called. */ -void __init setup_per_cpu_areas(void) + +void __init setup_arch(char **cmdline_p) { - int i, highest_cpu = 0; - unsigned long size; +#ifdef CONFIG_X86_32 + memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); + visws_early_detect(); + pre_setup_arch_hook(); +#else + printk(KERN_INFO "Command line: %s\n", boot_command_line); +#endif -#ifdef CONFIG_HOTPLUG_CPU - prefill_possible_map(); + early_cpu_init(); + early_ioremap_init(); + + ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); + screen_info = boot_params.screen_info; + edid_info = boot_params.edid_info; +#ifdef CONFIG_X86_32 + apm_info.bios = boot_params.apm_bios_info; + ist_info = boot_params.ist_info; + if (boot_params.sys_desc_table.length != 0) { + set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2); + machine_id = boot_params.sys_desc_table.table[0]; + machine_submodel_id = boot_params.sys_desc_table.table[1]; + BIOS_revision = boot_params.sys_desc_table.table[2]; + } #endif + saved_video_mode = boot_params.hdr.vid_mode; + bootloader_type = boot_params.hdr.type_of_loader; - /* Copy section for each CPU (we discard the original) */ - size = PERCPU_ENOUGH_ROOM; - printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", - size); +#ifdef CONFIG_BLK_DEV_RAM + rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK; + rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0); + rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0); +#endif +#ifdef CONFIG_EFI + if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, +#ifdef CONFIG_X86_32 + "EL32", +#else + "EL64", +#endif + 4)) { + efi_enabled = 1; + efi_reserve_early(); + } +#endif + + ARCH_SETUP + + setup_memory_map(); + parse_setup_data(); + /* update the e820_saved too */ + e820_reserve_setup_data(); + + copy_edd(); + + if (!boot_params.hdr.root_flags) + root_mountflags &= ~MS_RDONLY; + init_mm.start_code = (unsigned long) _text; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; +#ifdef CONFIG_X86_32 + init_mm.brk = init_pg_tables_end + PAGE_OFFSET; +#else + init_mm.brk = (unsigned long) &_end; +#endif - for_each_possible_cpu(i) { - char *ptr; -#ifndef CONFIG_NEED_MULTIPLE_NODES - ptr = alloc_bootmem_pages(size); + code_resource.start = virt_to_phys(_text); + code_resource.end = virt_to_phys(_etext)-1; + data_resource.start = virt_to_phys(_etext); + data_resource.end = virt_to_phys(_edata)-1; + bss_resource.start = virt_to_phys(&__bss_start); + bss_resource.end = virt_to_phys(&__bss_stop)-1; + +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); #else - int node = early_cpu_to_node(i); - if (!node_online(node) || !NODE_DATA(node)) { - ptr = alloc_bootmem_pages(size); - printk(KERN_INFO - "cpu %d has no node or node-local memory\n", i); - } - else - ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); + if (builtin_cmdline[0]) { + /* append boot loader cmdline to builtin */ + strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + } +#endif #endif - if (!ptr) - panic("Cannot allocate cpu data for CPU %d\n", i); + + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + parse_early_param(); + #ifdef CONFIG_X86_64 - cpu_pda(i)->data_offset = ptr - __per_cpu_start; + check_efer(); +#endif + +#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) + /* + * Must be before kernel pagetables are setup + * or fixmap area is touched. + */ + vmi_init(); +#endif + + /* after early param, so could get panic from serial */ + reserve_early_setup_data(); + + if (acpi_mps_check()) { +#ifdef CONFIG_X86_LOCAL_APIC + disable_apic = 1; +#endif + setup_clear_cpu_cap(X86_FEATURE_APIC); + } + +#ifdef CONFIG_PCI + if (pci_early_dump_regs) + early_dump_pci_devices(); +#endif + + finish_e820_parsing(); + + dmi_scan_machine(); + + dmi_check_system(bad_bios_dmi_table); + +#ifdef CONFIG_X86_32 + probe_roms(); +#endif + + /* after parse_early_param, so could debug it */ + insert_resource(&iomem_resource, &code_resource); + insert_resource(&iomem_resource, &data_resource); + insert_resource(&iomem_resource, &bss_resource); + + if (efi_enabled) + efi_init(); + +#ifdef CONFIG_X86_32 + if (ppro_with_ram_bug()) { + e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM, + E820_RESERVED); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + printk(KERN_INFO "fixed physical RAM map:\n"); + e820_print_map("bad_ppro"); + } #else - __per_cpu_offset[i] = ptr - __per_cpu_start; + early_gart_iommu_check(); #endif - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - highest_cpu = i; + /* + * partially used pages are not usable - thus + * we are rounding upwards: + */ + max_pfn = e820_end_of_ram_pfn(); + + /* preallocate 4k for mptable mpc */ + early_reserve_e820_mpc_new(); + /* update e820 for memory not covered by WB MTRRs */ + mtrr_bp_init(); + if (mtrr_trim_uncached_memory(max_pfn)) + max_pfn = e820_end_of_ram_pfn(); + +#ifdef CONFIG_X86_32 + /* max_low_pfn get updated here */ + find_low_pfn_range(); +#else + num_physpages = max_pfn; + + if (cpu_has_x2apic) + check_x2apic(); + + /* How many end-of-memory variables you have, grandma! */ + /* need this before calling reserve_initrd */ + if (max_pfn > (1UL<<(32 - PAGE_SHIFT))) + max_low_pfn = e820_end_of_low_ram_pfn(); + else + max_low_pfn = max_pfn; + + high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; +#endif + +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + + /* max_pfn_mapped is updated here */ + max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT); + max_pfn_mapped = max_low_pfn_mapped; + +#ifdef CONFIG_X86_64 + if (max_pfn > max_low_pfn) { + max_pfn_mapped = init_memory_mapping(1UL<<32, + max_pfn<<PAGE_SHIFT); + /* can we preseve max_low_pfn ?*/ + max_low_pfn = max_pfn; } +#endif - nr_cpu_ids = highest_cpu + 1; - printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d\n", NR_CPUS, nr_cpu_ids); + /* + * NOTE: On x86-32, only from this point on, fixmaps are ready for use. + */ - /* Setup percpu data maps */ - setup_per_cpu_maps(); +#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT + if (init_ohci1394_dma_early) + init_ohci1394_dma_on_all_controllers(); +#endif - /* Setup cpumask_of_cpu map */ - setup_cpumask_of_cpu(); -} + reserve_initrd(); +#ifdef CONFIG_X86_64 + vsmp_init(); +#endif + + io_delay_init(); + + /* + * Parse the ACPI tables for possible boot-time SMP configuration. + */ + acpi_boot_table_init(); + +#ifdef CONFIG_ACPI_NUMA + /* + * Parse SRAT to discover nodes. + */ + acpi_numa_init(); +#endif + + initmem_init(0, max_pfn); + +#ifdef CONFIG_ACPI_SLEEP + /* + * Reserve low memory region for sleep support. + */ + acpi_reserve_bootmem(); +#endif +#ifdef CONFIG_X86_FIND_SMP_CONFIG + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); +#endif + reserve_crashkernel(); + +#ifdef CONFIG_X86_64 + /* + * dma32_reserve_bootmem() allocates bootmem which may conflict + * with the crashkernel command line, so do that after + * reserve_crashkernel() + */ + dma32_reserve_bootmem(); +#endif + + reserve_ibft_region(); + +#ifdef CONFIG_KVM_CLOCK + kvmclock_init(); +#endif + + paravirt_pagetable_setup_start(swapper_pg_dir); + paging_init(); + paravirt_pagetable_setup_done(swapper_pg_dir); + paravirt_post_allocator_init(); + +#ifdef CONFIG_X86_64 + map_vsyscall(); +#endif + +#ifdef CONFIG_X86_GENERICARCH + generic_apic_probe(); #endif + + early_quirks(); + + /* + * Read APIC and some other early information from ACPI tables. + */ + acpi_boot_init(); + +#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS) + /* + * get boot-time SMP configuration: + */ + if (smp_found_config) + get_smp_config(); +#endif + + prefill_possible_map(); +#ifdef CONFIG_X86_64 + init_cpu_to_node(); +#endif + + init_apic_mappings(); + ioapic_init_mappings(); + + kvm_guest_init(); + + e820_reserve_resources(); + e820_mark_nosave_regions(max_low_pfn); + +#ifdef CONFIG_X86_32 + request_resource(&iomem_resource, &video_ram_resource); +#endif + reserve_standard_io_resources(); + + e820_setup_gap(); + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) + conswitchp = &vga_con; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} + + diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c deleted file mode 100644 index aee0e820077..00000000000 --- a/arch/x86/kernel/setup64.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * X86-64 specific CPU setup. - * Copyright (C) 1995 Linus Torvalds - * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen. - * See setup.c for older changelog. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/bitops.h> -#include <linux/module.h> -#include <linux/kgdb.h> -#include <asm/pda.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/desc.h> -#include <asm/atomic.h> -#include <asm/mmu_context.h> -#include <asm/smp.h> -#include <asm/i387.h> -#include <asm/percpu.h> -#include <asm/proto.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <asm/genapic.h> - -#ifndef CONFIG_DEBUG_BOOT_PARAMS -struct boot_params __initdata boot_params; -#else -struct boot_params boot_params; -#endif - -cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; - -struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly; -EXPORT_SYMBOL(_cpu_pda); -struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned; - -struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; - -char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); - -unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL_GPL(__supported_pte_mask); - -static int do_not_nx __cpuinitdata = 0; - -/* noexec=on|off -Control non executable mappings for 64bit processes. - -on Enable(default) -off Disable -*/ -static int __init nonx_setup(char *str) -{ - if (!str) - return -EINVAL; - if (!strncmp(str, "on", 2)) { - __supported_pte_mask |= _PAGE_NX; - do_not_nx = 0; - } else if (!strncmp(str, "off", 3)) { - do_not_nx = 1; - __supported_pte_mask &= ~_PAGE_NX; - } - return 0; -} -early_param("noexec", nonx_setup); - -int force_personality32 = 0; - -/* noexec32=on|off -Control non executable heap for 32bit processes. -To control the stack too use noexec=off - -on PROT_READ does not imply PROT_EXEC for 32bit processes (default) -off PROT_READ implies PROT_EXEC -*/ -static int __init nonx32_setup(char *str) -{ - if (!strcmp(str, "on")) - force_personality32 &= ~READ_IMPLIES_EXEC; - else if (!strcmp(str, "off")) - force_personality32 |= READ_IMPLIES_EXEC; - return 1; -} -__setup("noexec32=", nonx32_setup); - -void pda_init(int cpu) -{ - struct x8664_pda *pda = cpu_pda(cpu); - - /* Setup up data that may be needed in __get_free_pages early */ - asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); - - pda->cpunumber = cpu; - pda->irqcount = -1; - pda->kernelstack = - (unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; - pda->active_mm = &init_mm; - pda->mmu_state = 0; - - if (cpu == 0) { - /* others are initialized in smpboot.c */ - pda->pcurrent = &init_task; - pda->irqstackptr = boot_cpu_stack; - } else { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", cpu); - } - - - pda->irqstackptr += IRQSTACKSIZE-64; -} - -char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ] -__attribute__((section(".bss.page_aligned"))); - -extern asmlinkage void ignore_sysret(void); - -/* May not be marked __init: used by software suspend */ -void syscall_init(void) -{ - /* - * LSTAR and STAR live in a bit strange symbiosis. - * They both write to the same internal register. STAR allows to set CS/DS - * but only a 32bit target. LSTAR sets the 64bit rip. - */ - wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); - wrmsrl(MSR_LSTAR, system_call); - wrmsrl(MSR_CSTAR, ignore_sysret); - -#ifdef CONFIG_IA32_EMULATION - syscall32_cpu_init (); -#endif - - /* Flags to clear on syscall */ - wrmsrl(MSR_SYSCALL_MASK, - X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); -} - -void __cpuinit check_efer(void) -{ - unsigned long efer; - - rdmsrl(MSR_EFER, efer); - if (!(efer & EFER_NX) || do_not_nx) { - __supported_pte_mask &= ~_PAGE_NX; - } -} - -unsigned long kernel_eflags; - -/* - * Copies of the original ist values from the tss are only accessed during - * debugging, no special alignment required. - */ -DEFINE_PER_CPU(struct orig_ist, orig_ist); - -/* - * cpu_init() initializes state that is per-CPU. Some data is already - * initialized (naturally) in the bootstrap process, such as the GDT - * and IDT. We reload them nevertheless, this function acts as a - * 'CPU state barrier', nothing should get across. - * A lot of state is already set up in PDA init. - */ -void __cpuinit cpu_init (void) -{ - int cpu = stack_smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); - unsigned long v; - char *estacks = NULL; - struct task_struct *me; - int i; - - /* CPU 0 is initialised in head64.c */ - if (cpu != 0) { - pda_init(cpu); - } else - estacks = boot_exception_stacks; - - me = current; - - if (cpu_test_and_set(cpu, cpu_initialized)) - panic("CPU#%d already initialized!\n", cpu); - - printk("Initializing CPU#%d\n", cpu); - - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); - - /* - * Initialize the per-CPU GDT with the boot GDT, - * and set up the GDT descriptor: - */ - if (cpu) - memcpy(get_cpu_gdt_table(cpu), cpu_gdt_table, GDT_SIZE); - - cpu_gdt_descr[cpu].size = GDT_SIZE; - load_gdt((const struct desc_ptr *)&cpu_gdt_descr[cpu]); - load_idt((const struct desc_ptr *)&idt_descr); - - memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); - syscall_init(); - - wrmsrl(MSR_FS_BASE, 0); - wrmsrl(MSR_KERNEL_GS_BASE, 0); - barrier(); - - check_efer(); - - /* - * set up and load the per-CPU TSS - */ - for (v = 0; v < N_EXCEPTION_STACKS; v++) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception stack %ld %d\n", - v, cpu); - } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; - } - - t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); - /* - * <= is required because the CPU will access up to - * 8 bits beyond the end of the IO permission bitmap. - */ - for (i = 0; i <= IO_BITMAP_LONGS; i++) - t->io_bitmap[i] = ~0UL; - - atomic_inc(&init_mm.mm_count); - me->active_mm = &init_mm; - if (me->mm) - BUG(); - enter_lazy_tlb(&init_mm, me); - - set_tss_desc(cpu, t); - load_TR_desc(); - load_LDT(&init_mm.context); - -#ifdef CONFIG_KGDB - /* - * If the kgdb is connected no debug regs should be altered. This - * is only applicable when KGDB and a KGDB I/O module are built - * into the kernel and you are using early debugging with - * kgdbwait. KGDB will control the kernel HW breakpoint registers. - */ - if (kgdb_connected && arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - else { -#endif - /* - * Clear all 6 debug registers: - */ - - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); -#ifdef CONFIG_KGDB - /* If the kgdb is connected no debug regs should be altered. */ - } -#endif - - fpu_init(); - - raw_local_save_flags(kernel_eflags); - - if (is_uv_system()) - uv_cpu_init(); -} diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c deleted file mode 100644 index 2c5f8b213e8..00000000000 --- a/arch/x86/kernel/setup_32.c +++ /dev/null @@ -1,958 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 - * - * Memory region support - * David Parsons <orc@pell.chi.il.us>, July-August 1999 - * - * Added E820 sanitization routine (removes overlapping memory regions); - * Brian Moyle <bmoyle@mvista.com>, February 2001 - * - * Moved CPU detection code to cpu/${cpu}.c - * Patrick Mochel <mochel@osdl.org>, March 2002 - * - * Provisions for empty E820 memory regions (reported by certain BIOSes). - * Alex Achenbach <xela@slit.de>, December 2002. - * - */ - -/* - * This file handles the architecture-dependent parts of initialization - */ - -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/mmzone.h> -#include <linux/screen_info.h> -#include <linux/ioport.h> -#include <linux/acpi.h> -#include <linux/apm_bios.h> -#include <linux/initrd.h> -#include <linux/bootmem.h> -#include <linux/seq_file.h> -#include <linux/console.h> -#include <linux/mca.h> -#include <linux/root_dev.h> -#include <linux/highmem.h> -#include <linux/module.h> -#include <linux/efi.h> -#include <linux/init.h> -#include <linux/edd.h> -#include <linux/iscsi_ibft.h> -#include <linux/nodemask.h> -#include <linux/kexec.h> -#include <linux/crash_dump.h> -#include <linux/dmi.h> -#include <linux/pfn.h> -#include <linux/pci.h> -#include <linux/init_ohci1394_dma.h> -#include <linux/kvm_para.h> - -#include <video/edid.h> - -#include <asm/mtrr.h> -#include <asm/apic.h> -#include <asm/e820.h> -#include <asm/mpspec.h> -#include <asm/mmzone.h> -#include <asm/setup.h> -#include <asm/arch_hooks.h> -#include <asm/sections.h> -#include <asm/io_apic.h> -#include <asm/ist.h> -#include <asm/io.h> -#include <asm/vmi.h> -#include <setup_arch.h> -#include <asm/bios_ebda.h> -#include <asm/cacheflush.h> -#include <asm/processor.h> - -/* This value is set up by the early boot code to point to the value - immediately after the boot time page tables. It contains a *physical* - address, and must not be in the .bss segment! */ -unsigned long init_pg_tables_end __initdata = ~0UL; - -/* - * Machine setup.. - */ -static struct resource data_resource = { - .name = "Kernel data", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -static struct resource code_resource = { - .name = "Kernel code", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -static struct resource bss_resource = { - .name = "Kernel bss", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -static struct resource video_ram_resource = { - .name = "Video RAM area", - .start = 0xa0000, - .end = 0xbffff, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -static struct resource standard_io_resources[] = { { - .name = "dma1", - .start = 0x0000, - .end = 0x001f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "pic1", - .start = 0x0020, - .end = 0x0021, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "timer0", - .start = 0x0040, - .end = 0x0043, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "timer1", - .start = 0x0050, - .end = 0x0053, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "keyboard", - .start = 0x0060, - .end = 0x0060, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "keyboard", - .start = 0x0064, - .end = 0x0064, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "dma page reg", - .start = 0x0080, - .end = 0x008f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "pic2", - .start = 0x00a0, - .end = 0x00a1, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "dma2", - .start = 0x00c0, - .end = 0x00df, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "fpu", - .start = 0x00f0, - .end = 0x00ff, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -} }; - -/* cpu data as detected by the assembly code in head.S */ -struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; -/* common cpu data for all cpus */ -struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; -EXPORT_SYMBOL(boot_cpu_data); - -unsigned int def_to_bigsmp; - -#ifndef CONFIG_X86_PAE -unsigned long mmu_cr4_features; -#else -unsigned long mmu_cr4_features = X86_CR4_PAE; -#endif - -/* for MCA, but anyone else can use it if they want */ -unsigned int machine_id; -unsigned int machine_submodel_id; -unsigned int BIOS_revision; - -/* Boot loader ID as an integer, for the benefit of proc_dointvec */ -int bootloader_type; - -/* user-defined highmem size */ -static unsigned int highmem_pages = -1; - -/* - * Setup options - */ -struct screen_info screen_info; -EXPORT_SYMBOL(screen_info); -struct apm_info apm_info; -EXPORT_SYMBOL(apm_info); -struct edid_info edid_info; -EXPORT_SYMBOL_GPL(edid_info); -struct ist_info ist_info; -#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ - defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) -EXPORT_SYMBOL(ist_info); -#endif - -extern void early_cpu_init(void); -extern int root_mountflags; - -unsigned long saved_video_mode; - -#define RAMDISK_IMAGE_START_MASK 0x07FF -#define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 - -static char __initdata command_line[COMMAND_LINE_SIZE]; - -#ifndef CONFIG_DEBUG_BOOT_PARAMS -struct boot_params __initdata boot_params; -#else -struct boot_params boot_params; -#endif - -#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) -struct edd edd; -#ifdef CONFIG_EDD_MODULE -EXPORT_SYMBOL(edd); -#endif -/** - * copy_edd() - Copy the BIOS EDD information - * from boot_params into a safe place. - * - */ -static inline void copy_edd(void) -{ - memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer, - sizeof(edd.mbr_signature)); - memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info)); - edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries; - edd.edd_info_nr = boot_params.eddbuf_entries; -} -#else -static inline void copy_edd(void) -{ -} -#endif - -int __initdata user_defined_memmap; - -/* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to <mem>, overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * <start> to <start>+<mem>, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] - */ -static int __init parse_mem(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "nopentium") == 0) { - setup_clear_cpu_cap(X86_FEATURE_PSE); - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; - - mem_size = memparse(arg, &arg); - limit_regions(mem_size); - user_defined_memmap = 1; - } - return 0; -} -early_param("mem", parse_mem); - -#ifdef CONFIG_PROC_VMCORE -/* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. - */ -static int __init parse_elfcorehdr(char *arg) -{ - if (!arg) - return -EINVAL; - - elfcorehdr_addr = memparse(arg, &arg); - return 0; -} -early_param("elfcorehdr", parse_elfcorehdr); -#endif /* CONFIG_PROC_VMCORE */ - -/* - * highmem=size forces highmem to be exactly 'size' bytes. - * This works even on boxes that have no highmem otherwise. - * This also works to reduce highmem size on bigger boxes. - */ -static int __init parse_highmem(char *arg) -{ - if (!arg) - return -EINVAL; - - highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT; - return 0; -} -early_param("highmem", parse_highmem); - -/* - * vmalloc=size forces the vmalloc area to be exactly 'size' - * bytes. This can be used to increase (or decrease) the - * vmalloc area - the default is 128m. - */ -static int __init parse_vmalloc(char *arg) -{ - if (!arg) - return -EINVAL; - - __VMALLOC_RESERVE = memparse(arg, &arg); - return 0; -} -early_param("vmalloc", parse_vmalloc); - -/* - * reservetop=size reserves a hole at the top of the kernel address space which - * a hypervisor can load into later. Needed for dynamically loaded hypervisors, - * so relocating the fixmap can be done before paging initialization. - */ -static int __init parse_reservetop(char *arg) -{ - unsigned long address; - - if (!arg) - return -EINVAL; - - address = memparse(arg, &arg); - reserve_top_address(address); - return 0; -} -early_param("reservetop", parse_reservetop); - -/* - * Determine low and high memory ranges: - */ -unsigned long __init find_max_low_pfn(void) -{ - unsigned long max_low_pfn; - - max_low_pfn = max_pfn; - if (max_low_pfn > MAXMEM_PFN) { - if (highmem_pages == -1) - highmem_pages = max_pfn - MAXMEM_PFN; - if (highmem_pages + MAXMEM_PFN < max_pfn) - max_pfn = MAXMEM_PFN + highmem_pages; - if (highmem_pages + MAXMEM_PFN > max_pfn) { - printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages)); - highmem_pages = 0; - } - max_low_pfn = MAXMEM_PFN; -#ifndef CONFIG_HIGHMEM - /* Maximum memory usable is what is directly addressable */ - printk(KERN_WARNING "Warning only %ldMB will be used.\n", - MAXMEM>>20); - if (max_pfn > MAX_NONPAE_PFN) - printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n"); - else - printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); - max_pfn = MAXMEM_PFN; -#else /* !CONFIG_HIGHMEM */ -#ifndef CONFIG_HIGHMEM64G - if (max_pfn > MAX_NONPAE_PFN) { - max_pfn = MAX_NONPAE_PFN; - printk(KERN_WARNING "Warning only 4GB will be used.\n"); - printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n"); - } -#endif /* !CONFIG_HIGHMEM64G */ -#endif /* !CONFIG_HIGHMEM */ - } else { - if (highmem_pages == -1) - highmem_pages = 0; -#ifdef CONFIG_HIGHMEM - if (highmem_pages >= max_pfn) { - printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn)); - highmem_pages = 0; - } - if (highmem_pages) { - if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){ - printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages)); - highmem_pages = 0; - } - max_low_pfn -= highmem_pages; - } -#else - if (highmem_pages) - printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n"); -#endif - } - return max_low_pfn; -} - -#define BIOS_LOWMEM_KILOBYTES 0x413 - -/* - * The BIOS places the EBDA/XBDA at the top of conventional - * memory, and usually decreases the reported amount of - * conventional memory (int 0x12) too. This also contains a - * workaround for Dell systems that neglect to reserve EBDA. - * The same workaround also avoids a problem with the AMD768MPX - * chipset: reserve a page before VGA to prevent PCI prefetch - * into it (errata #56). Usually the page is reserved anyways, - * unless you have no PS/2 mouse plugged in. - */ -static void __init reserve_ebda_region(void) -{ - unsigned int lowmem, ebda_addr; - - /* To determine the position of the EBDA and the */ - /* end of conventional memory, we need to look at */ - /* the BIOS data area. In a paravirtual environment */ - /* that area is absent. We'll just have to assume */ - /* that the paravirt case can handle memory setup */ - /* correctly, without our help. */ - if (paravirt_enabled()) - return; - - /* end of low (conventional) memory */ - lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); - lowmem <<= 10; - - /* start of EBDA area */ - ebda_addr = get_bios_ebda(); - - /* Fixup: bios puts an EBDA in the top 64K segment */ - /* of conventional memory, but does not adjust lowmem. */ - if ((lowmem - ebda_addr) <= 0x10000) - lowmem = ebda_addr; - - /* Fixup: bios does not report an EBDA at all. */ - /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ - if ((ebda_addr == 0) && (lowmem >= 0x9f000)) - lowmem = 0x9f000; - - /* Paranoia: should never happen, but... */ - if ((lowmem == 0) || (lowmem >= 0x100000)) - lowmem = 0x9f000; - - /* reserve all memory between lowmem and the 1MB mark */ - reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT); -} - -#ifndef CONFIG_NEED_MULTIPLE_NODES -static void __init setup_bootmem_allocator(void); -static unsigned long __init setup_memory(void) -{ - /* - * partially used pages are not usable - thus - * we are rounding upwards: - */ - min_low_pfn = PFN_UP(init_pg_tables_end); - - max_low_pfn = find_max_low_pfn(); - -#ifdef CONFIG_HIGHMEM - highstart_pfn = highend_pfn = max_pfn; - if (max_pfn > max_low_pfn) { - highstart_pfn = max_low_pfn; - } - printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", - pages_to_mb(highend_pfn - highstart_pfn)); - num_physpages = highend_pfn; - high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; -#else - num_physpages = max_low_pfn; - high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1; -#endif -#ifdef CONFIG_FLATMEM - max_mapnr = num_physpages; -#endif - printk(KERN_NOTICE "%ldMB LOWMEM available.\n", - pages_to_mb(max_low_pfn)); - - setup_bootmem_allocator(); - - return max_low_pfn; -} - -static void __init zone_sizes_init(void) -{ - unsigned long max_zone_pfns[MAX_NR_ZONES]; - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - max_zone_pfns[ZONE_DMA] = - virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - max_zone_pfns[ZONE_NORMAL] = max_low_pfn; -#ifdef CONFIG_HIGHMEM - max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; - add_active_range(0, 0, highend_pfn); -#else - add_active_range(0, 0, max_low_pfn); -#endif - - free_area_init_nodes(max_zone_pfns); -} -#else -extern unsigned long __init setup_memory(void); -extern void zone_sizes_init(void); -#endif /* !CONFIG_NEED_MULTIPLE_NODES */ - -static inline unsigned long long get_total_mem(void) -{ - unsigned long long total; - - total = max_low_pfn - min_low_pfn; -#ifdef CONFIG_HIGHMEM - total += highend_pfn - highstart_pfn; -#endif - - return total << PAGE_SHIFT; -} - -#ifdef CONFIG_KEXEC -static void __init reserve_crashkernel(void) -{ - unsigned long long total_mem; - unsigned long long crash_size, crash_base; - int ret; - - total_mem = get_total_mem(); - - ret = parse_crashkernel(boot_command_line, total_mem, - &crash_size, &crash_base); - if (ret == 0 && crash_size > 0) { - if (crash_base > 0) { - printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " - "for crashkernel (System RAM: %ldMB)\n", - (unsigned long)(crash_size >> 20), - (unsigned long)(crash_base >> 20), - (unsigned long)(total_mem >> 20)); - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; - reserve_bootmem(crash_base, crash_size, - BOOTMEM_DEFAULT); - } else - printk(KERN_INFO "crashkernel reservation failed - " - "you have to specify a base address\n"); - } -} -#else -static inline void __init reserve_crashkernel(void) -{} -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - -static bool do_relocate_initrd = false; - -static void __init reserve_initrd(void) -{ - unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; - unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long ramdisk_end = ramdisk_image + ramdisk_size; - unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; - unsigned long ramdisk_here; - - initrd_start = 0; - - if (!boot_params.hdr.type_of_loader || - !ramdisk_image || !ramdisk_size) - return; /* No initrd provided by bootloader */ - - if (ramdisk_end < ramdisk_image) { - printk(KERN_ERR "initrd wraps around end of memory, " - "disabling initrd\n"); - return; - } - if (ramdisk_size >= end_of_lowmem/2) { - printk(KERN_ERR "initrd too large to handle, " - "disabling initrd\n"); - return; - } - if (ramdisk_end <= end_of_lowmem) { - /* All in lowmem, easy case */ - reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT); - initrd_start = ramdisk_image + PAGE_OFFSET; - initrd_end = initrd_start+ramdisk_size; - return; - } - - /* We need to move the initrd down into lowmem */ - ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK; - - /* Note: this includes all the lowmem currently occupied by - the initrd, we rely on that fact to keep the data intact. */ - reserve_bootmem(ramdisk_here, ramdisk_size, BOOTMEM_DEFAULT); - initrd_start = ramdisk_here + PAGE_OFFSET; - initrd_end = initrd_start + ramdisk_size; - - do_relocate_initrd = true; -} - -#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT) - -static void __init relocate_initrd(void) -{ - unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; - unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; - unsigned long ramdisk_here; - unsigned long slop, clen, mapaddr; - char *p, *q; - - if (!do_relocate_initrd) - return; - - ramdisk_here = initrd_start - PAGE_OFFSET; - - q = (char *)initrd_start; - - /* Copy any lowmem portion of the initrd */ - if (ramdisk_image < end_of_lowmem) { - clen = end_of_lowmem - ramdisk_image; - p = (char *)__va(ramdisk_image); - memcpy(q, p, clen); - q += clen; - ramdisk_image += clen; - ramdisk_size -= clen; - } - - /* Copy the highmem portion of the initrd */ - while (ramdisk_size) { - slop = ramdisk_image & ~PAGE_MASK; - clen = ramdisk_size; - if (clen > MAX_MAP_CHUNK-slop) - clen = MAX_MAP_CHUNK-slop; - mapaddr = ramdisk_image & PAGE_MASK; - p = early_ioremap(mapaddr, clen+slop); - memcpy(q, p+slop, clen); - early_iounmap(p, clen+slop); - q += clen; - ramdisk_image += clen; - ramdisk_size -= clen; - } -} - -#endif /* CONFIG_BLK_DEV_INITRD */ - -void __init setup_bootmem_allocator(void) -{ - unsigned long bootmap_size; - /* - * Initialize the boot-time allocator (with low memory only): - */ - bootmap_size = init_bootmem(min_low_pfn, max_low_pfn); - - register_bootmem_low_pages(max_low_pfn); - - /* - * Reserve the bootmem bitmap itself as well. We do this in two - * steps (first step was init_bootmem()) because this catches - * the (very unlikely) case of us accidentally initializing the - * bootmem allocator with an invalid RAM area. - */ - reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) + - bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text), - BOOTMEM_DEFAULT); - - /* - * reserve physical page 0 - it's a special BIOS page on many boxes, - * enabling clean reboots, SMP operation, laptop functions. - */ - reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT); - - /* reserve EBDA region */ - reserve_ebda_region(); - -#ifdef CONFIG_SMP - /* - * But first pinch a few for the stack/trampoline stuff - * FIXME: Don't need the extra page at 4K, but need to fix - * trampoline before removing it. (see the GDT stuff) - */ - reserve_bootmem(PAGE_SIZE, PAGE_SIZE, BOOTMEM_DEFAULT); -#endif -#ifdef CONFIG_ACPI_SLEEP - /* - * Reserve low memory region for sleep support. - */ - acpi_reserve_bootmem(); -#endif -#ifdef CONFIG_X86_FIND_SMP_CONFIG - /* - * Find and reserve possible boot-time SMP configuration: - */ - find_smp_config(); -#endif -#ifdef CONFIG_BLK_DEV_INITRD - reserve_initrd(); -#endif - numa_kva_reserve(); - reserve_crashkernel(); - - reserve_ibft_region(); -} - -/* - * The node 0 pgdat is initialized before all of these because - * it's needed for bootmem. node>0 pgdats have their virtual - * space allocated before the pagetables are in place to access - * them, so they can't be cleared then. - * - * This should all compile down to nothing when NUMA is off. - */ -static void __init remapped_pgdat_init(void) -{ - int nid; - - for_each_online_node(nid) { - if (nid != 0) - memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); - } -} - -#ifdef CONFIG_MCA -static void set_mca_bus(int x) -{ - MCA_bus = x; -} -#else -static void set_mca_bus(int x) { } -#endif - -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -char * __init __attribute__((weak)) memory_setup(void) -{ - return machine_specific_memory_setup(); -} - -#ifdef CONFIG_NUMA -/* - * In the golden day, when everything among i386 and x86_64 will be - * integrated, this will not live here - */ -void *x86_cpu_to_node_map_early_ptr; -int x86_cpu_to_node_map_init[NR_CPUS] = { - [0 ... NR_CPUS-1] = NUMA_NO_NODE -}; -DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE; -#endif - -/* - * Determine if we were loaded by an EFI loader. If so, then we have also been - * passed the efi memmap, systab, etc., so we should use these data structures - * for initialization. Note, the efi init code path is determined by the - * global efi_enabled. This allows the same kernel image to be used on existing - * systems (with a traditional BIOS) as well as on EFI systems. - */ -void __init setup_arch(char **cmdline_p) -{ - unsigned long max_low_pfn; - - memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); - pre_setup_arch_hook(); - early_cpu_init(); - early_ioremap_init(); - -#ifdef CONFIG_EFI - if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, - "EL32", 4)) - efi_enabled = 1; -#endif - - ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); - screen_info = boot_params.screen_info; - edid_info = boot_params.edid_info; - apm_info.bios = boot_params.apm_bios_info; - ist_info = boot_params.ist_info; - saved_video_mode = boot_params.hdr.vid_mode; - if( boot_params.sys_desc_table.length != 0 ) { - set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2); - machine_id = boot_params.sys_desc_table.table[0]; - machine_submodel_id = boot_params.sys_desc_table.table[1]; - BIOS_revision = boot_params.sys_desc_table.table[2]; - } - bootloader_type = boot_params.hdr.type_of_loader; - -#ifdef CONFIG_BLK_DEV_RAM - rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK; - rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0); - rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0); -#endif - ARCH_SETUP - - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); - - copy_edd(); - - if (!boot_params.hdr.root_flags) - root_mountflags &= ~MS_RDONLY; - init_mm.start_code = (unsigned long) _text; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = init_pg_tables_end + PAGE_OFFSET; - - code_resource.start = virt_to_phys(_text); - code_resource.end = virt_to_phys(_etext)-1; - data_resource.start = virt_to_phys(_etext); - data_resource.end = virt_to_phys(_edata)-1; - bss_resource.start = virt_to_phys(&__bss_start); - bss_resource.end = virt_to_phys(&__bss_stop)-1; - - parse_early_param(); - - if (user_defined_memmap) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); - } - - strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; - - if (efi_enabled) - efi_init(); - - /* update e820 for memory not covered by WB MTRRs */ - propagate_e820_map(); - mtrr_bp_init(); - if (mtrr_trim_uncached_memory(max_pfn)) - propagate_e820_map(); - - max_low_pfn = setup_memory(); - -#ifdef CONFIG_KVM_CLOCK - kvmclock_init(); -#endif - -#ifdef CONFIG_VMI - /* - * Must be after max_low_pfn is determined, and before kernel - * pagetables are setup. - */ - vmi_init(); -#endif - kvm_guest_init(); - - /* - * NOTE: before this point _nobody_ is allowed to allocate - * any memory using the bootmem allocator. Although the - * allocator is now initialised only the first 8Mb of the kernel - * virtual address space has been mapped. All allocations before - * paging_init() has completed must use the alloc_bootmem_low_pages() - * variant (which allocates DMA'able memory) and care must be taken - * not to exceed the 8Mb limit. - */ - -#ifdef CONFIG_SMP - smp_alloc_memory(); /* AP processor realmode stacks in low memory*/ -#endif - paging_init(); - - /* - * NOTE: On x86-32, only from this point on, fixmaps are ready for use. - */ - -#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT - if (init_ohci1394_dma_early) - init_ohci1394_dma_on_all_controllers(); -#endif - - remapped_pgdat_init(); - sparse_init(); - zone_sizes_init(); - - /* - * NOTE: at this point the bootmem allocator is fully available. - */ - -#ifdef CONFIG_BLK_DEV_INITRD - relocate_initrd(); -#endif - - paravirt_post_allocator_init(); - - dmi_scan_machine(); - - io_delay_init(); - -#ifdef CONFIG_X86_SMP - /* - * setup to use the early static init tables during kernel startup - * X86_SMP will exclude sub-arches that don't deal well with it. - */ - x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init; - x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init; -#endif -#endif - -#ifdef CONFIG_X86_GENERICARCH - generic_apic_probe(); -#endif - -#ifdef CONFIG_ACPI - /* - * Parse the ACPI tables for possible boot-time SMP configuration. - */ - acpi_boot_table_init(); -#endif - - early_quirks(); - -#ifdef CONFIG_ACPI - acpi_boot_init(); - -#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) - if (def_to_bigsmp) - printk(KERN_WARNING "More than 8 CPUs detected and " - "CONFIG_X86_PC cannot handle it.\nUse " - "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); -#endif -#endif -#ifdef CONFIG_X86_LOCAL_APIC - if (smp_found_config) - get_smp_config(); -#endif - - e820_register_memory(); - e820_mark_nosave_regions(); - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif -} - -/* - * Request address space for all standard resources - * - * This is called just before pcibios_init(), which is also a - * subsys_initcall, but is linked in later (in arch/i386/pci/common.c). - */ -static int __init request_standard_resources(void) -{ - int i; - - printk(KERN_INFO "Setting up standard PCI resources\n"); - init_iomem_resources(&code_resource, &data_resource, &bss_resource); - - request_resource(&iomem_resource, &video_ram_resource); - - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, &standard_io_resources[i]); - return 0; -} - -subsys_initcall(request_standard_resources); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c deleted file mode 100644 index 6dff1286ad8..00000000000 --- a/arch/x86/kernel/setup_64.c +++ /dev/null @@ -1,1194 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - */ - -/* - * This file handles the architecture-dependent parts of initialization - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/screen_info.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/initrd.h> -#include <linux/highmem.h> -#include <linux/bootmem.h> -#include <linux/module.h> -#include <asm/processor.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/crash_dump.h> -#include <linux/root_dev.h> -#include <linux/pci.h> -#include <asm/pci-direct.h> -#include <linux/efi.h> -#include <linux/acpi.h> -#include <linux/kallsyms.h> -#include <linux/edd.h> -#include <linux/iscsi_ibft.h> -#include <linux/mmzone.h> -#include <linux/kexec.h> -#include <linux/cpufreq.h> -#include <linux/dmi.h> -#include <linux/dma-mapping.h> -#include <linux/ctype.h> -#include <linux/sort.h> -#include <linux/uaccess.h> -#include <linux/init_ohci1394_dma.h> -#include <linux/kvm_para.h> - -#include <asm/mtrr.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/vsyscall.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/msr.h> -#include <asm/desc.h> -#include <video/edid.h> -#include <asm/e820.h> -#include <asm/dma.h> -#include <asm/gart.h> -#include <asm/mpspec.h> -#include <asm/mmu_context.h> -#include <asm/proto.h> -#include <asm/setup.h> -#include <asm/numa.h> -#include <asm/sections.h> -#include <asm/dmi.h> -#include <asm/cacheflush.h> -#include <asm/mce.h> -#include <asm/ds.h> -#include <asm/topology.h> -#include <asm/trampoline.h> -#include <asm/pat.h> - -#include <mach_apic.h> -#ifdef CONFIG_PARAVIRT -#include <asm/paravirt.h> -#else -#define ARCH_SETUP -#endif - -/* - * Machine setup.. - */ - -struct cpuinfo_x86 boot_cpu_data __read_mostly; -EXPORT_SYMBOL(boot_cpu_data); - -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - -unsigned long mmu_cr4_features; - -/* Boot loader ID as an integer, for the benefit of proc_dointvec */ -int bootloader_type; - -unsigned long saved_video_mode; - -int force_mwait __cpuinitdata; - -/* - * Early DMI memory - */ -int dmi_alloc_index; -char dmi_alloc_data[DMI_MAX_DATA]; - -/* - * Setup options - */ -struct screen_info screen_info; -EXPORT_SYMBOL(screen_info); -struct sys_desc_table_struct { - unsigned short length; - unsigned char table[0]; -}; - -struct edid_info edid_info; -EXPORT_SYMBOL_GPL(edid_info); - -extern int root_mountflags; - -char __initdata command_line[COMMAND_LINE_SIZE]; - -static struct resource standard_io_resources[] = { - { .name = "dma1", .start = 0x00, .end = 0x1f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "pic1", .start = 0x20, .end = 0x21, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "timer0", .start = 0x40, .end = 0x43, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "timer1", .start = 0x50, .end = 0x53, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "keyboard", .start = 0x60, .end = 0x60, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "keyboard", .start = 0x64, .end = 0x64, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "dma page reg", .start = 0x80, .end = 0x8f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "pic2", .start = 0xa0, .end = 0xa1, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "dma2", .start = 0xc0, .end = 0xdf, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "fpu", .start = 0xf0, .end = 0xff, - .flags = IORESOURCE_BUSY | IORESOURCE_IO } -}; - -#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM) - -static struct resource data_resource = { - .name = "Kernel data", - .start = 0, - .end = 0, - .flags = IORESOURCE_RAM, -}; -static struct resource code_resource = { - .name = "Kernel code", - .start = 0, - .end = 0, - .flags = IORESOURCE_RAM, -}; -static struct resource bss_resource = { - .name = "Kernel bss", - .start = 0, - .end = 0, - .flags = IORESOURCE_RAM, -}; - -static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); - -#ifdef CONFIG_PROC_VMCORE -/* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. This option will be passed - * by kexec loader to the capture kernel. - */ -static int __init setup_elfcorehdr(char *arg) -{ - char *end; - if (!arg) - return -EINVAL; - elfcorehdr_addr = memparse(arg, &end); - return end > arg ? 0 : -EINVAL; -} -early_param("elfcorehdr", setup_elfcorehdr); -#endif - -#ifndef CONFIG_NUMA -static void __init -contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) -{ - unsigned long bootmap_size, bootmap; - - bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; - bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size, - PAGE_SIZE); - if (bootmap == -1L) - panic("Cannot find bootmem map of size %ld\n", bootmap_size); - bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn); - e820_register_active_regions(0, start_pfn, end_pfn); - free_bootmem_with_active_regions(0, end_pfn); - early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT); - reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT); -} -#endif - -#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) -struct edd edd; -#ifdef CONFIG_EDD_MODULE -EXPORT_SYMBOL(edd); -#endif -/** - * copy_edd() - Copy the BIOS EDD information - * from boot_params into a safe place. - * - */ -static inline void copy_edd(void) -{ - memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer, - sizeof(edd.mbr_signature)); - memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info)); - edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries; - edd.edd_info_nr = boot_params.eddbuf_entries; -} -#else -static inline void copy_edd(void) -{ -} -#endif - -#ifdef CONFIG_KEXEC -static void __init reserve_crashkernel(void) -{ - unsigned long long total_mem; - unsigned long long crash_size, crash_base; - int ret; - - total_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT; - - ret = parse_crashkernel(boot_command_line, total_mem, - &crash_size, &crash_base); - if (ret == 0 && crash_size) { - if (crash_base <= 0) { - printk(KERN_INFO "crashkernel reservation failed - " - "you have to specify a base address\n"); - return; - } - - if (reserve_bootmem(crash_base, crash_size, - BOOTMEM_EXCLUSIVE) < 0) { - printk(KERN_INFO "crashkernel reservation failed - " - "memory is in use\n"); - return; - } - - printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " - "for crashkernel (System RAM: %ldMB)\n", - (unsigned long)(crash_size >> 20), - (unsigned long)(crash_base >> 20), - (unsigned long)(total_mem >> 20)); - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; - insert_resource(&iomem_resource, &crashk_res); - } -} -#else -static inline void __init reserve_crashkernel(void) -{} -#endif - -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -void __attribute__((weak)) __init memory_setup(void) -{ - machine_specific_memory_setup(); -} - -static void __init parse_setup_data(void) -{ - struct setup_data *data; - unsigned long pa_data; - - if (boot_params.hdr.version < 0x0209) - return; - pa_data = boot_params.hdr.setup_data; - while (pa_data) { - data = early_ioremap(pa_data, PAGE_SIZE); - switch (data->type) { - default: - break; - } -#ifndef CONFIG_DEBUG_BOOT_PARAMS - free_early(pa_data, pa_data+sizeof(*data)+data->len); -#endif - pa_data = data->next; - early_iounmap(data, PAGE_SIZE); - } -} - -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - -/* - * setup_arch - architecture-specific boot-time initializations - * - * Note: On x86_64, fixmaps are ready for use even before this is called. - */ -void __init setup_arch(char **cmdline_p) -{ - unsigned i; - - printk(KERN_INFO "Command line: %s\n", boot_command_line); - - ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); - screen_info = boot_params.screen_info; - edid_info = boot_params.edid_info; - saved_video_mode = boot_params.hdr.vid_mode; - bootloader_type = boot_params.hdr.type_of_loader; - -#ifdef CONFIG_BLK_DEV_RAM - rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK; - rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0); - rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0); -#endif -#ifdef CONFIG_EFI - if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, - "EL64", 4)) - efi_enabled = 1; -#endif - - ARCH_SETUP - - memory_setup(); - copy_edd(); - - if (!boot_params.hdr.root_flags) - root_mountflags &= ~MS_RDONLY; - init_mm.start_code = (unsigned long) &_text; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; - init_mm.brk = (unsigned long) &_end; - - code_resource.start = virt_to_phys(&_text); - code_resource.end = virt_to_phys(&_etext)-1; - data_resource.start = virt_to_phys(&_etext); - data_resource.end = virt_to_phys(&_edata)-1; - bss_resource.start = virt_to_phys(&__bss_start); - bss_resource.end = virt_to_phys(&__bss_stop)-1; - - early_identify_cpu(&boot_cpu_data); - - strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; - - parse_setup_data(); - - parse_early_param(); - -#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT - if (init_ohci1394_dma_early) - init_ohci1394_dma_on_all_controllers(); -#endif - - finish_e820_parsing(); - - /* after parse_early_param, so could debug it */ - insert_resource(&iomem_resource, &code_resource); - insert_resource(&iomem_resource, &data_resource); - insert_resource(&iomem_resource, &bss_resource); - - early_gart_iommu_check(); - - e820_register_active_regions(0, 0, -1UL); - /* - * partially used pages are not usable - thus - * we are rounding upwards: - */ - end_pfn = e820_end_of_ram(); - /* update e820 for memory not covered by WB MTRRs */ - mtrr_bp_init(); - if (mtrr_trim_uncached_memory(end_pfn)) { - e820_register_active_regions(0, 0, -1UL); - end_pfn = e820_end_of_ram(); - } - - num_physpages = end_pfn; - - check_efer(); - - max_pfn_mapped = init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT)); - if (efi_enabled) - efi_init(); - - vsmp_init(); - - dmi_scan_machine(); - - io_delay_init(); - -#ifdef CONFIG_KVM_CLOCK - kvmclock_init(); -#endif - -#ifdef CONFIG_SMP - /* setup to use the early static init tables during kernel startup */ - x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init; - x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init; -#endif -#endif - -#ifdef CONFIG_ACPI - /* - * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). - * Call this early for SRAT node setup. - */ - acpi_boot_table_init(); -#endif - - /* How many end-of-memory variables you have, grandma! */ - max_low_pfn = end_pfn; - max_pfn = end_pfn; - high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1; - - /* Remove active ranges so rediscovery with NUMA-awareness happens */ - remove_all_active_ranges(); - -#ifdef CONFIG_ACPI_NUMA - /* - * Parse SRAT to discover nodes. - */ - acpi_numa_init(); -#endif - -#ifdef CONFIG_NUMA - numa_initmem_init(0, end_pfn); -#else - contig_initmem_init(0, end_pfn); -#endif - - dma32_reserve_bootmem(); - -#ifdef CONFIG_ACPI_SLEEP - /* - * Reserve low memory region for sleep support. - */ - acpi_reserve_bootmem(); -#endif - - if (efi_enabled) - efi_reserve_bootmem(); - - /* - * Find and reserve possible boot-time SMP configuration: - */ - find_smp_config(); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { - unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; - unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long ramdisk_end = ramdisk_image + ramdisk_size; - unsigned long end_of_mem = end_pfn << PAGE_SHIFT; - - if (ramdisk_end <= end_of_mem) { - /* - * don't need to reserve again, already reserved early - * in x86_64_start_kernel, and early_res_to_bootmem - * convert that to reserved in bootmem - */ - initrd_start = ramdisk_image + PAGE_OFFSET; - initrd_end = initrd_start+ramdisk_size; - } else { - free_bootmem(ramdisk_image, ramdisk_size); - printk(KERN_ERR "initrd extends beyond end of memory " - "(0x%08lx > 0x%08lx)\ndisabling initrd\n", - ramdisk_end, end_of_mem); - initrd_start = 0; - } - } -#endif - reserve_crashkernel(); - - reserve_ibft_region(); - - paging_init(); - map_vsyscall(); - - early_quirks(); - -#ifdef CONFIG_ACPI - /* - * Read APIC and some other early information from ACPI tables. - */ - acpi_boot_init(); -#endif - - init_cpu_to_node(); - - /* - * get boot-time SMP configuration: - */ - if (smp_found_config) - get_smp_config(); - init_apic_mappings(); - ioapic_init_mappings(); - - kvm_guest_init(); - - /* - * We trust e820 completely. No explicit ROM probing in memory. - */ - e820_reserve_resources(); - e820_mark_nosave_regions(); - - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, &standard_io_resources[i]); - - e820_setup_gap(); - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif - - /* do this before identify_cpu for boot cpu */ - check_enable_amd_mmconf_dmi(); -} - -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) -{ - unsigned int *v; - - if (c->extended_cpuid_level < 0x80000004) - return 0; - - v = (unsigned int *) c->x86_model_id; - cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); - cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); - cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); - c->x86_model_id[48] = 0; - return 1; -} - - -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) -{ - unsigned int n, dummy, eax, ebx, ecx, edx; - - n = c->extended_cpuid_level; - - if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); - printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), " - "D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24) + (edx>>24); - /* On K8 L1 TLB is inclusive, so don't count it */ - c->x86_tlbsize = 0; - } - - if (n >= 0x80000006) { - cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); - ecx = cpuid_ecx(0x80000006); - c->x86_cache_size = ecx >> 16; - c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); - - printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - c->x86_cache_size, ecx & 0xFF); - } - if (n >= 0x80000008) { - cpuid(0x80000008, &eax, &dummy, &dummy, &dummy); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } -} - -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - - if (!cpu_has(c, X86_FEATURE_HT)) - return; - if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) - goto out; - - smp_num_siblings = (ebx & 0xff0000) >> 16; - - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of " - "siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; - } - - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(index_msb); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings); - - core_bits = get_count_order(c->x86_max_cores); - - c->cpu_core_id = phys_pkg_id(index_msb) & - ((1 << core_bits) - 1); - } -out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } - -#endif -} - -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); -} - -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) -{ - char *v = c->x86_vendor_id; - - if (!strcmp(v, "AuthenticAMD")) - c->x86_vendor = X86_VENDOR_AMD; - else if (!strcmp(v, "GenuineIntel")) - c->x86_vendor = X86_VENDOR_INTEL; - else if (!strcmp(v, "CentaurHauls")) - c->x86_vendor = X86_VENDOR_CENTAUR; - else - c->x86_vendor = X86_VENDOR_UNKNOWN; -} - -/* Do some early cpuid on the boot CPU to get some parameter that are - needed before check_bugs. Everything advanced is in identify_cpu - below. */ -static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) -{ - u32 tfms, xlvl; - - c->loops_per_jiffy = loops_per_jiffy; - c->x86_cache_size = -1; - c->x86_vendor = X86_VENDOR_UNKNOWN; - c->x86_model = c->x86_mask = 0; /* So far unknown... */ - c->x86_vendor_id[0] = '\0'; /* Unset */ - c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_clflush_size = 64; - c->x86_cache_alignment = c->x86_clflush_size; - c->x86_max_cores = 1; - c->x86_coreid_bits = 0; - c->extended_cpuid_level = 0; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c); - - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - __u32 misc; - cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4], - &c->x86_capability[0]); - c->x86 = (tfms >> 8) & 0xf; - c->x86_model = (tfms >> 4) & 0xf; - c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) - c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } - - c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff; -#ifdef CONFIG_SMP - c->phys_proc_id = c->initial_apicid; -#endif - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - c->extended_cpuid_level = xlvl; - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ - } - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - /* Don't set x86_cpuid_level here for now to not confuse. */ - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } - - c->extended_cpuid_level = cpuid_eax(0x80000000); - if (c->extended_cpuid_level >= 0x80000007) - c->x86_power = cpuid_edx(0x80000007); - - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - early_init_amd(c); - break; - case X86_VENDOR_INTEL: - early_init_intel(c); - break; - case X86_VENDOR_CENTAUR: - early_init_centaur(c); - break; - } - - validate_pat_support(c); -} - -/* - * This does the hard work of actually picking apart the CPU stuff... - */ -void __cpuinit identify_cpu(struct cpuinfo_x86 *c) -{ - int i; - - early_identify_cpu(c); - - init_scattered_cpuid_features(c); - - c->apicid = phys_pkg_id(0); - - /* - * Vendor-specific initialization. In this section we - * canonicalize the feature flags, meaning if there are - * features a certain CPU supports which CPUID doesn't - * tell us, CPUID claiming incorrect flags, or other bugs, - * we handle them here. - * - * At the end of this section, c->x86_capability better - * indicate the features this CPU genuinely supports! - */ - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - init_amd(c); - break; - - case X86_VENDOR_INTEL: - init_intel(c); - break; - - case X86_VENDOR_CENTAUR: - init_centaur(c); - break; - - case X86_VENDOR_UNKNOWN: - default: - display_cacheinfo(c); - break; - } - - detect_ht(c); - - /* - * On SMP, boot_cpu_data holds the common feature set between - * all CPUs; so make sure that we indicate which features are - * common between the CPUs. The first time this routine gets - * executed, c == &boot_cpu_data. - */ - if (c != &boot_cpu_data) { - /* AND the already accumulated flags with these */ - for (i = 0; i < NCAPINTS; i++) - boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; - } - - /* Clear all flags overriden by options */ - for (i = 0; i < NCAPINTS; i++) - c->x86_capability[i] &= ~cleared_cpu_caps[i]; - -#ifdef CONFIG_X86_MCE - mcheck_init(c); -#endif - select_idle_routine(c); - -#ifdef CONFIG_NUMA - numa_add_cpu(smp_processor_id()); -#endif - -} - -void __cpuinit identify_boot_cpu(void) -{ - identify_cpu(&boot_cpu_data); -} - -void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) -{ - BUG_ON(c == &boot_cpu_data); - identify_cpu(c); - mtrr_ap_init(); -} - -static __init int setup_noclflush(char *arg) -{ - setup_clear_cpu_cap(X86_FEATURE_CLFLSH); - return 1; -} -__setup("noclflush", setup_noclflush); - -void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) -{ - if (c->x86_model_id[0]) - printk(KERN_CONT "%s", c->x86_model_id); - - if (c->x86_mask || c->cpuid_level >= 0) - printk(KERN_CONT " stepping %02x\n", c->x86_mask); - else - printk(KERN_CONT "\n"); -} - -static __init int setup_disablecpuid(char *arg) -{ - int bit; - if (get_option(&arg, &bit) && bit < NCAPINTS*32) - setup_clear_cpu_cap(bit); - else - return 0; - return 1; -} -__setup("clearcpuid=", setup_disablecpuid); diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c new file mode 100644 index 00000000000..0e67f72d931 --- /dev/null +++ b/arch/x86/kernel/setup_percpu.c @@ -0,0 +1,385 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/percpu.h> +#include <linux/kexec.h> +#include <linux/crash_dump.h> +#include <asm/smp.h> +#include <asm/percpu.h> +#include <asm/sections.h> +#include <asm/processor.h> +#include <asm/setup.h> +#include <asm/topology.h> +#include <asm/mpspec.h> +#include <asm/apicdef.h> +#include <asm/highmem.h> + +#ifdef CONFIG_X86_LOCAL_APIC +unsigned int num_processors; +unsigned disabled_cpus __cpuinitdata; +/* Processor that is doing the boot up */ +unsigned int boot_cpu_physical_apicid = -1U; +unsigned int max_physical_apicid; +EXPORT_SYMBOL(boot_cpu_physical_apicid); + +/* Bitmask of physically existing CPUs */ +physid_mask_t phys_cpu_present_map; +#endif + +/* map cpu index to physical APIC ID */ +DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID); +DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +#define X86_64_NUMA 1 + +/* map cpu index to node index */ +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); + +/* which logical CPUs are on which nodes */ +cpumask_t *node_to_cpumask_map; +EXPORT_SYMBOL(node_to_cpumask_map); + +/* setup node_to_cpumask_map */ +static void __init setup_node_to_cpumask_map(void); + +#else +static inline void setup_node_to_cpumask_map(void) { } +#endif + +#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) +/* + * Copy data used in early init routines from the initial arrays to the + * per cpu data areas. These arrays then become expendable and the + * *_early_ptr's are zeroed indicating that the static arrays are gone. + */ +static void __init setup_per_cpu_maps(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + per_cpu(x86_cpu_to_apicid, cpu) = + early_per_cpu_map(x86_cpu_to_apicid, cpu); + per_cpu(x86_bios_cpu_apicid, cpu) = + early_per_cpu_map(x86_bios_cpu_apicid, cpu); +#ifdef X86_64_NUMA + per_cpu(x86_cpu_to_node_map, cpu) = + early_per_cpu_map(x86_cpu_to_node_map, cpu); +#endif + } + + /* indicate the early static arrays will soon be gone */ + early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; + early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; +#ifdef X86_64_NUMA + early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; +#endif +} + +#ifdef CONFIG_X86_32 +/* + * Great future not-so-futuristic plan: make i386 and x86_64 do it + * the same way + */ +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(__per_cpu_offset); +static inline void setup_cpu_pda_map(void) { } + +#elif !defined(CONFIG_SMP) +static inline void setup_cpu_pda_map(void) { } + +#else /* CONFIG_SMP && CONFIG_X86_64 */ + +/* + * Allocate cpu_pda pointer table and array via alloc_bootmem. + */ +static void __init setup_cpu_pda_map(void) +{ + char *pda; + struct x8664_pda **new_cpu_pda; + unsigned long size; + int cpu; + + size = roundup(sizeof(struct x8664_pda), cache_line_size()); + + /* allocate cpu_pda array and pointer table */ + { + unsigned long tsize = nr_cpu_ids * sizeof(void *); + unsigned long asize = size * (nr_cpu_ids - 1); + + tsize = roundup(tsize, cache_line_size()); + new_cpu_pda = alloc_bootmem(tsize + asize); + pda = (char *)new_cpu_pda + tsize; + } + + /* initialize pointer table to static pda's */ + for_each_possible_cpu(cpu) { + if (cpu == 0) { + /* leave boot cpu pda in place */ + new_cpu_pda[0] = cpu_pda(0); + continue; + } + new_cpu_pda[cpu] = (struct x8664_pda *)pda; + new_cpu_pda[cpu]->in_bootmem = 1; + pda += size; + } + + /* point to new pointer table */ + _cpu_pda = new_cpu_pda; +} +#endif + +/* + * Great future plan: + * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. + * Always point %gs to its beginning + */ +void __init setup_per_cpu_areas(void) +{ + ssize_t size = PERCPU_ENOUGH_ROOM; + char *ptr; + int cpu; + + /* Setup cpu_pda map */ + setup_cpu_pda_map(); + + /* Copy section for each CPU (we discard the original) */ + size = PERCPU_ENOUGH_ROOM; + printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n", + size); + + for_each_possible_cpu(cpu) { +#ifndef CONFIG_NEED_MULTIPLE_NODES + ptr = alloc_bootmem_pages(size); +#else + int node = early_cpu_to_node(cpu); + if (!node_online(node) || !NODE_DATA(node)) { + ptr = alloc_bootmem_pages(size); + printk(KERN_INFO + "cpu %d has no node %d or node-local memory\n", + cpu, node); + if (ptr) + printk(KERN_DEBUG "per cpu data for cpu%d at %016lx\n", + cpu, __pa(ptr)); + } + else { + ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); + if (ptr) + printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n", + cpu, node, __pa(ptr)); + } +#endif + per_cpu_offset(cpu) = ptr - __per_cpu_start; + memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); + + } + + printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n", + NR_CPUS, nr_cpu_ids, nr_node_ids); + + /* Setup percpu data maps */ + setup_per_cpu_maps(); + + /* Setup node to cpumask map */ + setup_node_to_cpumask_map(); +} + +#endif + +#ifdef X86_64_NUMA + +/* + * Allocate node_to_cpumask_map based on number of available nodes + * Requires node_possible_map to be valid. + * + * Note: node_to_cpumask() is not valid until after this is done. + */ +static void __init setup_node_to_cpumask_map(void) +{ + unsigned int node, num = 0; + cpumask_t *map; + + /* setup nr_node_ids if not done yet */ + if (nr_node_ids == MAX_NUMNODES) { + for_each_node_mask(node, node_possible_map) + num = node; + nr_node_ids = num + 1; + } + + /* allocate the map */ + map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t)); + + pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n", + map, nr_node_ids); + + /* node_to_cpumask() will now work */ + node_to_cpumask_map = map; +} + +void __cpuinit numa_set_node(int cpu, int node) +{ + int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); + + if (cpu_pda(cpu) && node != NUMA_NO_NODE) + cpu_pda(cpu)->nodenumber = node; + + if (cpu_to_node_map) + cpu_to_node_map[cpu] = node; + + else if (per_cpu_offset(cpu)) + per_cpu(x86_cpu_to_node_map, cpu) = node; + + else + pr_debug("Setting node for non-present cpu %d\n", cpu); +} + +void __cpuinit numa_clear_node(int cpu) +{ + numa_set_node(cpu, NUMA_NO_NODE); +} + +#ifndef CONFIG_DEBUG_PER_CPU_MAPS + +void __cpuinit numa_add_cpu(int cpu) +{ + cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]); +} + +#else /* CONFIG_DEBUG_PER_CPU_MAPS */ + +/* + * --------- debug versions of the numa functions --------- + */ +static void __cpuinit numa_set_cpumask(int cpu, int enable) +{ + int node = cpu_to_node(cpu); + cpumask_t *mask; + char buf[64]; + + if (node_to_cpumask_map == NULL) { + printk(KERN_ERR "node_to_cpumask_map NULL\n"); + dump_stack(); + return; + } + + mask = &node_to_cpumask_map[node]; + if (enable) + cpu_set(cpu, *mask); + else + cpu_clear(cpu, *mask); + + cpulist_scnprintf(buf, sizeof(buf), *mask); + printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", + enable? "numa_add_cpu":"numa_remove_cpu", cpu, node, buf); + } + +void __cpuinit numa_add_cpu(int cpu) +{ + numa_set_cpumask(cpu, 1); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + numa_set_cpumask(cpu, 0); +} + +int cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) { + printk(KERN_WARNING + "cpu_to_node(%d): usage too early!\n", cpu); + dump_stack(); + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} +EXPORT_SYMBOL(cpu_to_node); + +/* + * Same function as cpu_to_node() but used if called before the + * per_cpu areas are setup. + */ +int early_cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + + if (!per_cpu_offset(cpu)) { + printk(KERN_WARNING + "early_cpu_to_node(%d): no per_cpu area!\n", cpu); + dump_stack(); + return NUMA_NO_NODE; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} + + +/* empty cpumask */ +static const cpumask_t cpu_mask_none; + +/* + * Returns a pointer to the bitmask of CPUs on Node 'node'. + */ +const cpumask_t *_node_to_cpumask_ptr(int node) +{ + if (node_to_cpumask_map == NULL) { + printk(KERN_WARNING + "_node_to_cpumask_ptr(%d): no node_to_cpumask_map!\n", + node); + dump_stack(); + return (const cpumask_t *)&cpu_online_map; + } + if (node >= nr_node_ids) { + printk(KERN_WARNING + "_node_to_cpumask_ptr(%d): node > nr_node_ids(%d)\n", + node, nr_node_ids); + dump_stack(); + return &cpu_mask_none; + } + return &node_to_cpumask_map[node]; +} +EXPORT_SYMBOL(_node_to_cpumask_ptr); + +/* + * Returns a bitmask of CPUs on Node 'node'. + * + * Side note: this function creates the returned cpumask on the stack + * so with a high NR_CPUS count, excessive stack space is used. The + * node_to_cpumask_ptr function should be used whenever possible. + */ +cpumask_t node_to_cpumask(int node) +{ + if (node_to_cpumask_map == NULL) { + printk(KERN_WARNING + "node_to_cpumask(%d): no node_to_cpumask_map!\n", node); + dump_stack(); + return cpu_online_map; + } + if (node >= nr_node_ids) { + printk(KERN_WARNING + "node_to_cpumask(%d): node > nr_node_ids(%d)\n", + node, nr_node_ids); + dump_stack(); + return cpu_mask_none; + } + return node_to_cpumask_map[node]; +} +EXPORT_SYMBOL(node_to_cpumask); + +/* + * --------- end of debug versions of the numa functions --------- + */ + +#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ + +#endif /* X86_64_NUMA */ + diff --git a/arch/x86/kernel/sigframe.h b/arch/x86/kernel/sigframe.h index 72bbb519d2d..cc673aa55ce 100644 --- a/arch/x86/kernel/sigframe.h +++ b/arch/x86/kernel/sigframe.h @@ -3,9 +3,18 @@ struct sigframe { char __user *pretcode; int sig; struct sigcontext sc; - struct _fpstate fpstate; + /* + * fpstate is unused. fpstate is moved/allocated after + * retcode[] below. This movement allows to have the FP state and the + * future state extensions (xsave) stay together. + * And at the same time retaining the unused fpstate, prevents changing + * the offset of extramask[] in the sigframe and thus prevent any + * legacy application accessing/modifying it. + */ + struct _fpstate fpstate_unused; unsigned long extramask[_NSIG_WORDS-1]; char retcode[8]; + /* fp state follows here */ }; struct rt_sigframe { @@ -15,13 +24,19 @@ struct rt_sigframe { void __user *puc; struct siginfo info; struct ucontext uc; - struct _fpstate fpstate; char retcode[8]; + /* fp state follows here */ }; #else struct rt_sigframe { char __user *pretcode; struct ucontext uc; struct siginfo info; + /* fp state follows here */ }; + +int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs); +int ia32_setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs); #endif diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c index d9237363096..d6dd057d0f2 100644 --- a/arch/x86/kernel/signal_32.c +++ b/arch/x86/kernel/signal_32.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/sched.h> #include <linux/wait.h> +#include <linux/tracehook.h> #include <linux/elf.h> #include <linux/smp.h> #include <linux/mm.h> @@ -26,6 +27,8 @@ #include <asm/uaccess.h> #include <asm/i387.h> #include <asm/vdso.h> +#include <asm/syscall.h> +#include <asm/syscalls.h> #include "sigframe.h" @@ -110,6 +113,27 @@ asmlinkage int sys_sigaltstack(unsigned long bx) return do_sigaltstack(uss, uoss, regs->sp); } +#define COPY(x) { \ + err |= __get_user(regs->x, &sc->x); \ +} + +#define COPY_SEG(seg) { \ + unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + regs->seg = tmp; \ +} + +#define COPY_SEG_STRICT(seg) { \ + unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + regs->seg = tmp | 3; \ +} + +#define GET_SEG(seg) { \ + unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + loadsegment(seg, tmp); \ +} /* * Do a signal return; undo the signal stack. @@ -118,28 +142,13 @@ static int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *pax) { + void __user *buf; + unsigned int tmpflags; unsigned int err = 0; /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; -#define COPY(x) err |= __get_user(regs->x, &sc->x) - -#define COPY_SEG(seg) \ - { unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ - regs->seg = tmp; } - -#define COPY_SEG_STRICT(seg) \ - { unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ - regs->seg = tmp|3; } - -#define GET_SEG(seg) \ - { unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ - loadsegment(seg, tmp); } - GET_SEG(gs); COPY_SEG(fs); COPY_SEG(es); @@ -149,38 +158,15 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, COPY_SEG_STRICT(cs); COPY_SEG_STRICT(ss); - { - unsigned int tmpflags; - - err |= __get_user(tmpflags, &sc->flags); - regs->flags = (regs->flags & ~FIX_EFLAGS) | - (tmpflags & FIX_EFLAGS); - regs->orig_ax = -1; /* disable syscall checks */ - } + err |= __get_user(tmpflags, &sc->flags); + regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); + regs->orig_ax = -1; /* disable syscall checks */ - { - struct _fpstate __user *buf; - - err |= __get_user(buf, &sc->fpstate); - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= restore_i387(buf); - } else { - struct task_struct *me = current; - - if (used_math()) { - clear_fpu(me); - clear_used_math(); - } - } - } + err |= __get_user(buf, &sc->fpstate); + err |= restore_i387_xstate(buf); err |= __get_user(*pax, &sc->ax); return err; - -badframe: - return 1; } asmlinkage unsigned long sys_sigreturn(unsigned long __unused) @@ -212,7 +198,7 @@ asmlinkage unsigned long sys_sigreturn(unsigned long __unused) badframe: if (show_unhandled_signals && printk_ratelimit()) { - printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:" + printk("%s%s[%d] bad frame in sigreturn frame:" "%p ip:%lx sp:%lx oeax:%lx", task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG, current->comm, task_pid_nr(current), frame, regs->ip, @@ -226,9 +212,8 @@ badframe: return 0; } -asmlinkage int sys_rt_sigreturn(unsigned long __unused) +static long do_rt_sigreturn(struct pt_regs *regs) { - struct pt_regs *regs = (struct pt_regs *)&__unused; struct rt_sigframe __user *frame; unsigned long ax; sigset_t set; @@ -254,15 +239,22 @@ asmlinkage int sys_rt_sigreturn(unsigned long __unused) return ax; badframe: - force_sig(SIGSEGV, current); + signal_fault(regs, frame, "rt_sigreturn"); return 0; } +asmlinkage int sys_rt_sigreturn(unsigned long __unused) +{ + struct pt_regs *regs = (struct pt_regs *)&__unused; + + return do_rt_sigreturn(regs); +} + /* * Set up a signal frame. */ static int -setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, +setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate, struct pt_regs *regs, unsigned long mask) { int tmp, err = 0; @@ -289,7 +281,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, err |= __put_user(regs->sp, &sc->sp_at_signal); err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss); - tmp = save_i387(fpstate); + tmp = save_i387_xstate(fpstate); if (tmp < 0) err = 1; else @@ -306,7 +298,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, * Determine which stack to use.. */ static inline void __user * -get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) +get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size, + void **fpstate) { unsigned long sp; @@ -332,6 +325,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) sp = (unsigned long) ka->sa.sa_restorer; } + if (used_math()) { + sp = sp - sig_xstate_size; + *fpstate = (struct _fpstate *) sp; + } + sp -= frame_size; /* * Align the stack pointer according to the i386 ABI, @@ -343,38 +341,29 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) } static int -setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, - struct pt_regs *regs) +__setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, + struct pt_regs *regs) { struct sigframe __user *frame; void __user *restorer; int err = 0; - int usig; + void __user *fpstate = NULL; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; + return -EFAULT; - usig = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; + if (__put_user(sig, &frame->sig)) + return -EFAULT; - err = __put_user(usig, &frame->sig); - if (err) - goto give_sigsegv; - - err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]); - if (err) - goto give_sigsegv; + if (setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0])) + return -EFAULT; if (_NSIG_WORDS > 1) { - err = __copy_to_user(&frame->extramask, &set->sig[1], - sizeof(frame->extramask)); - if (err) - goto give_sigsegv; + if (__copy_to_user(&frame->extramask, &set->sig[1], + sizeof(frame->extramask))) + return -EFAULT; } if (current->mm->context.vdso) @@ -399,7 +388,7 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, err |= __put_user(0x80cd, (short __user *)(frame->retcode+6)); if (err) - goto give_sigsegv; + return -EFAULT; /* Set up registers for signal handler */ regs->sp = (unsigned long)frame; @@ -414,50 +403,43 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, regs->cs = __USER_CS; return 0; - -give_sigsegv: - force_sigsegv(sig, current); - return -EFAULT; } -static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs) +static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; void __user *restorer; int err = 0; - int usig; + void __user *fpstate = NULL; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - usig = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; + return -EFAULT; - err |= __put_user(usig, &frame->sig); + err |= __put_user(sig, &frame->sig); err |= __put_user(&frame->info, &frame->pinfo); err |= __put_user(&frame->uc, &frame->puc); err |= copy_siginfo_to_user(&frame->info, info); if (err) - goto give_sigsegv; + return -EFAULT; /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); + if (cpu_has_xsave) + err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); + else + err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate, + err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate, regs, set->sig[0]); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) - goto give_sigsegv; + return -EFAULT; /* Set up to return from userspace. */ restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn); @@ -477,12 +459,12 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(0x80cd, (short __user *)(frame->retcode+5)); if (err) - goto give_sigsegv; + return -EFAULT; /* Set up registers for signal handler */ regs->sp = (unsigned long)frame; regs->ip = (unsigned long)ka->sa.sa_handler; - regs->ax = (unsigned long)usig; + regs->ax = (unsigned long)sig; regs->dx = (unsigned long)&frame->info; regs->cx = (unsigned long)&frame->uc; @@ -492,15 +474,48 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->cs = __USER_CS; return 0; - -give_sigsegv: - force_sigsegv(sig, current); - return -EFAULT; } /* * OK, we're invoking a handler: */ +static int signr_convert(int sig) +{ + struct thread_info *info = current_thread_info(); + + if (info->exec_domain && info->exec_domain->signal_invmap && sig < 32) + return info->exec_domain->signal_invmap[sig]; + return sig; +} + +#define is_ia32 1 +#define ia32_setup_frame __setup_frame +#define ia32_setup_rt_frame __setup_rt_frame + +static int +setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + int usig = signr_convert(sig); + int ret; + + /* Set up the stack frame */ + if (is_ia32) { + if (ka->sa.sa_flags & SA_SIGINFO) + ret = ia32_setup_rt_frame(usig, ka, info, set, regs); + else + ret = ia32_setup_frame(usig, ka, set, regs); + } else + ret = __setup_rt_frame(sig, ka, info, set, regs); + + if (ret) { + force_sigsegv(sig, current); + return -EFAULT; + } + + return ret; +} + static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) @@ -508,9 +523,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, int ret; /* Are we from a system call? */ - if ((long)regs->orig_ax >= 0) { + if (syscall_get_nr(current, regs) >= 0) { /* If so, check system call restarting.. */ - switch (regs->ax) { + switch (syscall_get_error(current, regs)) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: regs->ax = -EINTR; @@ -537,15 +552,20 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, likely(test_and_clear_thread_flag(TIF_FORCED_TF))) regs->flags &= ~X86_EFLAGS_TF; - /* Set up the stack frame */ - if (ka->sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(sig, ka, info, oldset, regs); - else - ret = setup_frame(sig, ka, oldset, regs); + ret = setup_rt_frame(sig, ka, info, oldset, regs); if (ret) return ret; +#ifdef CONFIG_X86_64 + /* + * This has nothing to do with segment registers, + * despite the name. This magic affects uaccess.h + * macros' behavior. Reset it to the normal setting. + */ + set_fs(USER_DS); +#endif + /* * Clear the direction flag as per the ABI for function entry. */ @@ -558,8 +578,6 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * handler too. */ regs->flags &= ~X86_EFLAGS_TF; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); @@ -568,9 +586,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); + tracehook_signal_handler(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); + return 0; } +#define NR_restart_syscall __NR_restart_syscall /* * Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by @@ -623,9 +645,9 @@ static void do_signal(struct pt_regs *regs) } /* Did we come from a system call? */ - if ((long)regs->orig_ax >= 0) { + if (syscall_get_nr(current, regs) >= 0) { /* Restart the system call - no handlers present */ - switch (regs->ax) { + switch (syscall_get_error(current, regs)) { case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: @@ -634,7 +656,7 @@ static void do_signal(struct pt_regs *regs) break; case -ERESTART_RESTARTBLOCK: - regs->ax = __NR_restart_syscall; + regs->ax = NR_restart_syscall; regs->ip -= 2; break; } @@ -657,18 +679,38 @@ static void do_signal(struct pt_regs *regs) void do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { - /* Pending single-step? */ - if (thread_info_flags & _TIF_SINGLESTEP) { - regs->flags |= X86_EFLAGS_TF; - clear_thread_flag(TIF_SINGLESTEP); - } +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE) + /* notify userspace of pending MCEs */ + if (thread_info_flags & _TIF_MCE_NOTIFY) + mce_notify_user(); +#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */ /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs); - if (thread_info_flags & _TIF_HRTICK_RESCHED) - hrtick_resched(); + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } +#ifdef CONFIG_X86_32 clear_thread_flag(TIF_IRET); +#endif /* CONFIG_X86_32 */ +} + +void signal_fault(struct pt_regs *regs, void __user *frame, char *where) +{ + struct task_struct *me = current; + + if (show_unhandled_signals && printk_ratelimit()) { + printk(KERN_INFO + "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx", + me->comm, me->pid, where, frame, + regs->ip, regs->sp, regs->orig_ax); + print_vma_addr(" in ", regs->ip); + printk(KERN_CONT "\n"); + } + + force_sig(SIGSEGV, me); } diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index e53b267662e..a5c9627f4db 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -15,17 +15,21 @@ #include <linux/errno.h> #include <linux/wait.h> #include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/unistd.h> #include <linux/stddef.h> #include <linux/personality.h> #include <linux/compiler.h> +#include <linux/uaccess.h> + #include <asm/processor.h> #include <asm/ucontext.h> -#include <asm/uaccess.h> #include <asm/i387.h> #include <asm/proto.h> #include <asm/ia32_unistd.h> #include <asm/mce.h> +#include <asm/syscall.h> +#include <asm/syscalls.h> #include "sigframe.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -41,11 +45,6 @@ # define FIX_EFLAGS __FIX_EFLAGS #endif -int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs); -int ia32_setup_frame(int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs * regs); - asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) @@ -53,6 +52,15 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, return do_sigaltstack(uss, uoss, regs->sp); } +#define COPY(x) { \ + err |= __get_user(regs->x, &sc->x); \ +} + +#define COPY_SEG_STRICT(seg) { \ + unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + regs->seg = tmp | 3; \ +} /* * Do a signal return; undo the signal stack. @@ -61,13 +69,13 @@ static int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *pax) { + void __user *buf; + unsigned int tmpflags; unsigned int err = 0; /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; -#define COPY(x) err |= __get_user(regs->x, &sc->x) - COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); COPY(dx); COPY(cx); COPY(ip); COPY(r8); @@ -82,48 +90,24 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, /* Kernel saves and restores only the CS segment register on signals, * which is the bare minimum needed to allow mixed 32/64-bit code. * App's signal handler can save/restore other segments if needed. */ - { - unsigned cs; - err |= __get_user(cs, &sc->cs); - regs->cs = cs | 3; /* Force into user mode */ - } + COPY_SEG_STRICT(cs); - { - unsigned int tmpflags; - err |= __get_user(tmpflags, &sc->flags); - regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); - regs->orig_ax = -1; /* disable syscall checks */ - } + err |= __get_user(tmpflags, &sc->flags); + regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); + regs->orig_ax = -1; /* disable syscall checks */ - { - struct _fpstate __user * buf; - err |= __get_user(buf, &sc->fpstate); - - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= restore_i387(buf); - } else { - struct task_struct *me = current; - if (used_math()) { - clear_fpu(me); - clear_used_math(); - } - } - } + err |= __get_user(buf, &sc->fpstate); + err |= restore_i387_xstate(buf); err |= __get_user(*pax, &sc->ax); return err; - -badframe: - return 1; } -asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) +static long do_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe __user *frame; - sigset_t set; unsigned long ax; + sigset_t set; frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long)); if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) @@ -136,7 +120,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) current->blocked = set; recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax)) goto badframe; @@ -146,16 +130,22 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) return ax; badframe: - signal_fault(regs,frame,"sigreturn"); + signal_fault(regs, frame, "rt_sigreturn"); return 0; -} +} + +asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) +{ + return do_rt_sigreturn(regs); +} /* * Set up a signal frame. */ static inline int -setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me) +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask, struct task_struct *me) { int err = 0; @@ -207,41 +197,40 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) sp = current->sas_ss_sp + current->sas_ss_size; } - return (void __user *)round_down(sp - size, 16); + return (void __user *)round_down(sp - size, 64); } -static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs) +static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; - struct _fpstate __user *fp = NULL; + void __user *fp = NULL; int err = 0; struct task_struct *me = current; if (used_math()) { - fp = get_stack(ka, regs, sizeof(struct _fpstate)); + fp = get_stack(ka, regs, sig_xstate_size); frame = (void __user *)round_down( (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8; - if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) - goto give_sigsegv; - - if (save_i387(fp) < 0) - err |= -1; + if (save_i387_xstate(fp) < 0) + return -EFAULT; } else frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8; if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; + return -EFAULT; - if (ka->sa.sa_flags & SA_SIGINFO) { - err |= copy_siginfo_to_user(&frame->info, info); - if (err) - goto give_sigsegv; + if (ka->sa.sa_flags & SA_SIGINFO) { + if (copy_siginfo_to_user(&frame->info, info)) + return -EFAULT; } - + /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); + if (cpu_has_xsave) + err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); + else + err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->sp), @@ -249,9 +238,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me); err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); - if (sizeof(*set) == 16) { + if (sizeof(*set) == 16) { __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); - __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); + __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); } else err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); @@ -262,15 +251,15 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); } else { /* could use a vstub here */ - goto give_sigsegv; + return -EFAULT; } if (err) - goto give_sigsegv; + return -EFAULT; /* Set up registers for signal handler */ regs->di = sig; - /* In case the signal handler was declared without prototypes */ + /* In case the signal handler was declared without prototypes */ regs->ax = 0; /* This also works for non SA_SIGINFO handlers because they expect the @@ -286,44 +275,45 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->cs = __USER_CS; return 0; - -give_sigsegv: - force_sigsegv(sig, current); - return -EFAULT; } /* - * Return -1L or the syscall number that @regs is executing. + * OK, we're invoking a handler */ -static long current_syscall(struct pt_regs *regs) +static int signr_convert(int sig) { - /* - * We always sign-extend a -1 value being set here, - * so this is always either -1L or a syscall number. - */ - return regs->orig_ax; + return sig; } -/* - * Return a value that is -EFOO if the system call in @regs->orig_ax - * returned an error. This only works for @regs from @current. - */ -static long current_syscall_ret(struct pt_regs *regs) -{ #ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) - /* - * Sign-extend the value so (int)-EFOO becomes (long)-EFOO - * and will match correctly in comparisons. - */ - return (int) regs->ax; +#define is_ia32 test_thread_flag(TIF_IA32) +#else +#define is_ia32 0 #endif - return regs->ax; -} -/* - * OK, we're invoking a handler - */ +static int +setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + int usig = signr_convert(sig); + int ret; + + /* Set up the stack frame */ + if (is_ia32) { + if (ka->sa.sa_flags & SA_SIGINFO) + ret = ia32_setup_rt_frame(usig, ka, info, set, regs); + else + ret = ia32_setup_frame(usig, ka, set, regs); + } else + ret = __setup_rt_frame(sig, ka, info, set, regs); + + if (ret) { + force_sigsegv(sig, current); + return -EFAULT; + } + + return ret; +} static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, @@ -332,9 +322,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, int ret; /* Are we from a system call? */ - if (current_syscall(regs) >= 0) { + if (syscall_get_nr(current, regs) >= 0) { /* If so, check system call restarting.. */ - switch (current_syscall_ret(regs)) { + switch (syscall_get_error(current, regs)) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: regs->ax = -EINTR; @@ -361,50 +351,48 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, likely(test_and_clear_thread_flag(TIF_FORCED_TF))) regs->flags &= ~X86_EFLAGS_TF; -#ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) { - if (ka->sa.sa_flags & SA_SIGINFO) - ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs); - else - ret = ia32_setup_frame(sig, ka, oldset, regs); - } else -#endif ret = setup_rt_frame(sig, ka, info, oldset, regs); - if (ret == 0) { - /* - * This has nothing to do with segment registers, - * despite the name. This magic affects uaccess.h - * macros' behavior. Reset it to the normal setting. - */ - set_fs(USER_DS); + if (ret) + return ret; - /* - * Clear the direction flag as per the ABI for function entry. - */ - regs->flags &= ~X86_EFLAGS_DF; +#ifdef CONFIG_X86_64 + /* + * This has nothing to do with segment registers, + * despite the name. This magic affects uaccess.h + * macros' behavior. Reset it to the normal setting. + */ + set_fs(USER_DS); +#endif - /* - * Clear TF when entering the signal handler, but - * notify any tracer that was single-stepping it. - * The tracer may want to single-step inside the - * handler too. - */ - regs->flags &= ~X86_EFLAGS_TF; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); - - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + /* + * Clear the direction flag as per the ABI for function entry. + */ + regs->flags &= ~X86_EFLAGS_DF; - return ret; + /* + * Clear TF when entering the signal handler, but + * notify any tracer that was single-stepping it. + * The tracer may want to single-step inside the + * handler too. + */ + regs->flags &= ~X86_EFLAGS_TF; + + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + tracehook_signal_handler(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); + + return 0; } +#define NR_restart_syscall \ + test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall /* * Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by @@ -434,7 +422,8 @@ static void do_signal(struct pt_regs *regs) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - /* Re-enable any watchpoints before delivering the + /* + * Re-enable any watchpoints before delivering the * signal to user space. The processor register will * have been cleared if the watchpoint triggered * inside the kernel. @@ -442,7 +431,7 @@ static void do_signal(struct pt_regs *regs) if (current->thread.debugreg7) set_debugreg(current->thread.debugreg7, 7); - /* Whee! Actually deliver the signal. */ + /* Whee! Actually deliver the signal. */ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { /* * A signal was successfully delivered; the saved @@ -456,19 +445,18 @@ static void do_signal(struct pt_regs *regs) } /* Did we come from a system call? */ - if (current_syscall(regs) >= 0) { + if (syscall_get_nr(current, regs) >= 0) { /* Restart the system call - no handlers present */ - switch (current_syscall_ret(regs)) { + switch (syscall_get_error(current, regs)) { case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: regs->ax = regs->orig_ax; regs->ip -= 2; break; + case -ERESTART_RESTARTBLOCK: - regs->ax = test_thread_flag(TIF_IA32) ? - __NR_ia32_restart_syscall : - __NR_restart_syscall; + regs->ax = NR_restart_syscall; regs->ip -= 2; break; } @@ -484,38 +472,45 @@ static void do_signal(struct pt_regs *regs) } } -void do_notify_resume(struct pt_regs *regs, void *unused, - __u32 thread_info_flags) +/* + * notification of userspace execution resumption + * - triggered by the TIF_WORK_MASK flags + */ +void +do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { - /* Pending single-step? */ - if (thread_info_flags & _TIF_SINGLESTEP) { - regs->flags |= X86_EFLAGS_TF; - clear_thread_flag(TIF_SINGLESTEP); - } - -#ifdef CONFIG_X86_MCE +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE) /* notify userspace of pending MCEs */ if (thread_info_flags & _TIF_MCE_NOTIFY) mce_notify_user(); -#endif /* CONFIG_X86_MCE */ +#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */ /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs); - if (thread_info_flags & _TIF_HRTICK_RESCHED) - hrtick_resched(); + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + +#ifdef CONFIG_X86_32 + clear_thread_flag(TIF_IRET); +#endif /* CONFIG_X86_32 */ } void signal_fault(struct pt_regs *regs, void __user *frame, char *where) -{ - struct task_struct *me = current; +{ + struct task_struct *me = current; + if (show_unhandled_signals && printk_ratelimit()) { - printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx", - me->comm,me->pid,where,frame,regs->ip,regs->sp,regs->orig_ax); + printk(KERN_INFO + "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx", + me->comm, me->pid, where, frame, + regs->ip, regs->sp, regs->orig_ax); print_vma_addr(" in ", regs->ip); - printk("\n"); + printk(KERN_CONT "\n"); } - force_sig(SIGSEGV, me); -} + force_sig(SIGSEGV, me); +} diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 0cb7aadc87c..18f9b19f5f8 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -121,132 +121,23 @@ static void native_smp_send_reschedule(int cpu) send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); } -/* - * Structure and data for smp_call_function(). This is designed to minimise - * static memory requirements. It also looks cleaner. - */ -static DEFINE_SPINLOCK(call_lock); - -struct call_data_struct { - void (*func) (void *info); - void *info; - atomic_t started; - atomic_t finished; - int wait; -}; - -void lock_ipi_call_lock(void) -{ - spin_lock_irq(&call_lock); -} - -void unlock_ipi_call_lock(void) +void native_send_call_func_single_ipi(int cpu) { - spin_unlock_irq(&call_lock); -} - -static struct call_data_struct *call_data; - -static void __smp_call_function(void (*func) (void *info), void *info, - int nonatomic, int wait) -{ - struct call_data_struct data; - int cpus = num_online_cpus() - 1; - - if (!cpus) - return; - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - call_data = &data; - mb(); - - /* Send a message to all other CPUs and wait for them to respond */ - send_IPI_allbutself(CALL_FUNCTION_VECTOR); - - /* Wait for response */ - while (atomic_read(&data.started) != cpus) - cpu_relax(); - - if (wait) - while (atomic_read(&data.finished) != cpus) - cpu_relax(); + send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_SINGLE_VECTOR); } - -/** - * smp_call_function_mask(): Run a function on a set of other CPUs. - * @mask: The set of cpus to run on. Must not include the current cpu. - * @func: The function to run. This must be fast and non-blocking. - * @info: An arbitrary pointer to pass to the function. - * @wait: If true, wait (atomically) until function has completed on other CPUs. - * - * Returns 0 on success, else a negative status code. - * - * If @wait is true, then returns once @func has returned; otherwise - * it returns just before the target cpu calls @func. - * - * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. - */ -static int -native_smp_call_function_mask(cpumask_t mask, - void (*func)(void *), void *info, - int wait) +void native_send_call_func_ipi(cpumask_t mask) { - struct call_data_struct data; cpumask_t allbutself; - int cpus; - - /* Can deadlock when called with interrupts disabled */ - WARN_ON(irqs_disabled()); - - /* Holding any lock stops cpus from going down. */ - spin_lock(&call_lock); allbutself = cpu_online_map; cpu_clear(smp_processor_id(), allbutself); - cpus_and(mask, mask, allbutself); - cpus = cpus_weight(mask); - - if (!cpus) { - spin_unlock(&call_lock); - return 0; - } - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - call_data = &data; - wmb(); - - /* Send a message to other CPUs */ if (cpus_equal(mask, allbutself) && cpus_equal(cpu_online_map, cpu_callout_map)) send_IPI_allbutself(CALL_FUNCTION_VECTOR); else send_IPI_mask(mask, CALL_FUNCTION_VECTOR); - - /* Wait for response */ - while (atomic_read(&data.started) != cpus) - cpu_relax(); - - if (wait) - while (atomic_read(&data.finished) != cpus) - cpu_relax(); - spin_unlock(&call_lock); - - return 0; } static void stop_this_cpu(void *dummy) @@ -268,18 +159,13 @@ static void stop_this_cpu(void *dummy) static void native_smp_send_stop(void) { - int nolock; unsigned long flags; if (reboot_force) return; - /* Don't deadlock on the call lock in panic */ - nolock = !spin_trylock(&call_lock); + smp_call_function(stop_this_cpu, NULL, 0); local_irq_save(flags); - __smp_call_function(stop_this_cpu, NULL, 0, 0); - if (!nolock) - spin_unlock(&call_lock); disable_local_APIC(); local_irq_restore(flags); } @@ -301,44 +187,44 @@ void smp_reschedule_interrupt(struct pt_regs *regs) void smp_call_function_interrupt(struct pt_regs *regs) { - void (*func) (void *info) = call_data->func; - void *info = call_data->info; - int wait = call_data->wait; - ack_APIC_irq(); - /* - * Notify initiating CPU that I've grabbed the data and am - * about to execute the function - */ - mb(); - atomic_inc(&call_data->started); - /* - * At this point the info structure may be out of scope unless wait==1 - */ irq_enter(); - (*func)(info); + generic_smp_call_function_interrupt(); #ifdef CONFIG_X86_32 __get_cpu_var(irq_stat).irq_call_count++; #else add_pda(irq_call_count, 1); #endif irq_exit(); +} - if (wait) { - mb(); - atomic_inc(&call_data->finished); - } +void smp_call_function_single_interrupt(struct pt_regs *regs) +{ + ack_APIC_irq(); + irq_enter(); + generic_smp_call_function_single_interrupt(); +#ifdef CONFIG_X86_32 + __get_cpu_var(irq_stat).irq_call_count++; +#else + add_pda(irq_call_count, 1); +#endif + irq_exit(); } struct smp_ops smp_ops = { .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, .smp_prepare_cpus = native_smp_prepare_cpus, - .cpu_up = native_cpu_up, .smp_cpus_done = native_smp_cpus_done, .smp_send_stop = native_smp_send_stop, .smp_send_reschedule = native_smp_send_reschedule, - .smp_call_function_mask = native_smp_call_function_mask, + + .cpu_up = native_cpu_up, + .cpu_die = native_cpu_die, + .cpu_disable = native_cpu_disable, + .play_dead = native_play_dead, + + .send_call_func_ipi = native_send_call_func_ipi, + .send_call_func_single_ipi = native_send_call_func_single_ipi, }; EXPORT_SYMBOL_GPL(smp_ops); - diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 56078d61c79..76b6f50978f 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -52,6 +52,7 @@ #include <asm/desc.h> #include <asm/nmi.h> #include <asm/irq.h> +#include <asm/idle.h> #include <asm/smp.h> #include <asm/trampoline.h> #include <asm/cpu.h> @@ -59,7 +60,6 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/mtrr.h> -#include <asm/nmi.h> #include <asm/vmi.h> #include <asm/genapic.h> #include <linux/mc146818rtc.h> @@ -68,22 +68,6 @@ #include <mach_wakecpu.h> #include <smpboot_hooks.h> -/* - * FIXME: For x86_64, those are defined in other files. But moving them here, - * would make the setup areas dependent on smp, which is a loss. When we - * integrate apic between arches, we can probably do a better job, but - * right now, they'll stay here -- glommer - */ - -/* which logical CPU number maps to which CPU (physical APIC ID) */ -u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata = - { [0 ... NR_CPUS-1] = BAD_APICID }; -void *x86_cpu_to_apicid_early_ptr; - -u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata - = { [0 ... NR_CPUS-1] = BAD_APICID }; -void *x86_bios_cpu_apicid_early_ptr; - #ifdef CONFIG_X86_32 u8 apicid_2_node[MAX_APICID]; static int low_mappings; @@ -105,7 +89,7 @@ static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); #define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) #define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p)) #else -struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; +static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; #define get_idle_for_cpu(x) (idle_thread_array[(x)]) #define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p)) #endif @@ -140,13 +124,12 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); static atomic_t init_deasserted; -static int boot_cpu_logical_apicid; /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; /* Set if we find a B stepping CPU */ -int __cpuinitdata smp_b_stepping; +static int __cpuinitdata smp_b_stepping; #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32) @@ -182,6 +165,8 @@ static void unmap_cpu_to_node(int cpu) #endif #ifdef CONFIG_X86_32 +static int boot_cpu_logical_apicid; + u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -198,13 +183,12 @@ static void map_cpu_to_logical_apicid(void) map_cpu_to_node(cpu, node); } -static void unmap_cpu_to_logical_apicid(int cpu) +void numa_remove_cpu(int cpu) { cpu_2_logical_apicid[cpu] = BAD_APICID; unmap_cpu_to_node(cpu); } #else -#define unmap_cpu_to_logical_apicid(cpu) do {} while (0) #define map_cpu_to_logical_apicid() do {} while (0) #endif @@ -228,13 +212,13 @@ static void __cpuinit smp_callin(void) /* * (This works even if the APIC is not enabled.) */ - phys_id = GET_APIC_ID(read_apic_id()); + phys_id = read_apic_id(); cpuid = smp_processor_id(); if (cpu_isset(cpuid, cpu_callin_map)) { panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__, phys_id, cpuid); } - Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); + pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); /* * STARTUP IPIs are fragile beasts as they might sometimes @@ -269,12 +253,13 @@ static void __cpuinit smp_callin(void) * boards) */ - Dprintk("CALLIN, before setup_local_APIC().\n"); + pr_debug("CALLIN, before setup_local_APIC().\n"); smp_callin_clear_local_apic(); setup_local_APIC(); end_local_APIC_setup(); map_cpu_to_logical_apicid(); + notify_cpu_starting(cpuid); /* * Get our bogomips. * @@ -284,7 +269,7 @@ static void __cpuinit smp_callin(void) local_irq_enable(); calibrate_delay(); local_irq_disable(); - Dprintk("Stack at about %p\n", &cpuid); + pr_debug("Stack at about %p\n", &cpuid); /* * Save our processor parameters @@ -344,20 +329,17 @@ static void __cpuinit start_secondary(void *unused) * for which cpus receive the IPI. Holding this * lock helps us to not include this cpu in a currently in progress * smp_call_function(). + * + * We need to hold vector_lock so there the set of online cpus + * does not change while we are assigning vectors to cpus. Holding + * this lock ensures we don't half assign or remove an irq from a cpu. */ - lock_ipi_call_lock(); -#ifdef CONFIG_X86_64 - spin_lock(&vector_lock); - - /* Setup the per cpu irq handling data structures */ + ipi_call_lock_irq(); + lock_vector_lock(); __setup_vector_irq(smp_processor_id()); - /* - * Allow the master to continue. - */ - spin_unlock(&vector_lock); -#endif cpu_set(smp_processor_id(), cpu_online_map); - unlock_ipi_call_lock(); + unlock_vector_lock(); + ipi_call_unlock_irq(); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; setup_secondary_clock(); @@ -366,31 +348,8 @@ static void __cpuinit start_secondary(void *unused) cpu_idle(); } -#ifdef CONFIG_X86_32 -/* - * Everything has been set up for the secondary - * CPUs - they just need to reload everything - * from the task structure - * This function must not return. - */ -void __devinit initialize_secondary(void) -{ - /* - * We don't actually need to load the full TSS, - * basically just the stack pointer and the ip. - */ - - asm volatile( - "movl %0,%%esp\n\t" - "jmp *%1" - : - :"m" (current->thread.sp), "m" (current->thread.ip)); -} -#endif - static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c) { -#ifdef CONFIG_X86_32 /* * Mask B, Pentium, but not Pentium MMX */ @@ -440,7 +399,6 @@ static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c) valid_k7: ; -#endif } static void __cpuinit smp_checks(void) @@ -487,7 +445,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) cpu_set(cpu, cpu_sibling_setup_map); if (smp_num_siblings > 1) { - for_each_cpu_mask(i, cpu_sibling_setup_map) { + for_each_cpu_mask_nr(i, cpu_sibling_setup_map) { if (c->phys_proc_id == cpu_data(i).phys_proc_id && c->cpu_core_id == cpu_data(i).cpu_core_id) { cpu_set(i, per_cpu(cpu_sibling_map, cpu)); @@ -510,7 +468,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) return; } - for_each_cpu_mask(i, cpu_sibling_setup_map) { + for_each_cpu_mask_nr(i, cpu_sibling_setup_map) { if (per_cpu(cpu_llc_id, cpu) != BAD_APICID && per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) { cpu_set(i, c->llc_shared_map); @@ -555,23 +513,6 @@ cpumask_t cpu_coregroup_map(int cpu) return c->llc_shared_map; } -#ifdef CONFIG_X86_32 -/* - * We are called very early to get the low memory for the - * SMP bootup trampoline page. - */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - /* - * Has to be in very low memory so we can execute - * real-mode AP code. - */ - if (__pa(trampoline_base) >= 0x9F000) - BUG(); -} -#endif - static void impress_friends(void) { int cpu; @@ -579,7 +520,7 @@ static void impress_friends(void) /* * Allow the user to impress friends. */ - Dprintk("Before bogomips.\n"); + pr_debug("Before bogomips.\n"); for_each_possible_cpu(cpu) if (cpu_isset(cpu, cpu_callout_map)) bogosum += cpu_data(cpu).loops_per_jiffy; @@ -589,7 +530,7 @@ static void impress_friends(void) bogosum/(500000/HZ), (bogosum/(5000/HZ))%100); - Dprintk("Before bogocount - setting activated=1.\n"); + pr_debug("Before bogocount - setting activated=1.\n"); } static inline void __inquire_remote_apic(int apicid) @@ -612,8 +553,7 @@ static inline void __inquire_remote_apic(int apicid) printk(KERN_CONT "a previous APIC delivery may have failed\n"); - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]); + apic_icr_write(APIC_DM_REMRD | regs[i], apicid); timeout = 0; do { @@ -645,29 +585,22 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) int maxlvt; /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); + apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid); - Dprintk("Waiting for send to finish...\n"); + pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); /* * Give the other CPU some time to accept the IPI. */ udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ maxlvt = lapic_get_maxlvt(); - if (maxlvt > 3) { - apic_read_around(APIC_SPIV); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ apic_write(APIC_ESR, 0); - } accept_status = (apic_read(APIC_ESR) & 0xEF); - Dprintk("NMI sent.\n"); + pr_debug("NMI sent.\n"); if (send_status) printk(KERN_ERR "APIC never delivered???\n"); @@ -691,42 +624,40 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) return send_status; } + maxlvt = lapic_get_maxlvt(); + /* * Be paranoid about clearing APIC errors. */ if (APIC_INTEGRATED(apic_version[phys_apicid])) { - apic_read_around(APIC_SPIV); - apic_write(APIC_ESR, 0); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); apic_read(APIC_ESR); } - Dprintk("Asserting INIT.\n"); + pr_debug("Asserting INIT.\n"); /* * Turn INIT on target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* * Send IPI */ - apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT - | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT, + phys_apicid); - Dprintk("Waiting for send to finish...\n"); + pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); mdelay(10); - Dprintk("Deasserting INIT.\n"); + pr_debug("Deasserting INIT.\n"); /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Send IPI */ - apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid); - Dprintk("Waiting for send to finish...\n"); + pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); mb(); @@ -748,64 +679,51 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) * target processor state. */ startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, -#ifdef CONFIG_X86_64 - (unsigned long)init_rsp); -#else (unsigned long)stack_start.sp); -#endif /* * Run STARTUP IPI loop. */ - Dprintk("#startup loops: %d.\n", num_starts); - - maxlvt = lapic_get_maxlvt(); + pr_debug("#startup loops: %d.\n", num_starts); for (j = 1; j <= num_starts; j++) { - Dprintk("Sending STARTUP #%d.\n", j); - apic_read_around(APIC_SPIV); - apic_write(APIC_ESR, 0); + pr_debug("Sending STARTUP #%d.\n", j); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); apic_read(APIC_ESR); - Dprintk("After apic_write.\n"); + pr_debug("After apic_write.\n"); /* * STARTUP IPI */ /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write_around(APIC_ICR, APIC_DM_STARTUP - | (start_eip >> 12)); + apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12), + phys_apicid); /* * Give the other CPU some time to accept the IPI. */ udelay(300); - Dprintk("Startup point 1.\n"); + pr_debug("Startup point 1.\n"); - Dprintk("Waiting for send to finish...\n"); + pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); /* * Give the other CPU some time to accept the IPI. */ udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - if (maxlvt > 3) { - apic_read_around(APIC_SPIV); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ apic_write(APIC_ESR, 0); - } accept_status = (apic_read(APIC_ESR) & 0xEF); if (send_status || accept_status) break; } - Dprintk("After Startup.\n"); + pr_debug("After Startup.\n"); if (send_status) printk(KERN_ERR "APIC never delivered???\n"); @@ -832,6 +750,52 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } +#ifdef CONFIG_X86_64 + +/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */ +static void __ref free_bootmem_pda(struct x8664_pda *oldpda) +{ + if (!after_bootmem) + free_bootmem((unsigned long)oldpda, sizeof(*oldpda)); +} + +/* + * Allocate node local memory for the AP pda. + * + * Must be called after the _cpu_pda pointer table is initialized. + */ +int __cpuinit get_local_pda(int cpu) +{ + struct x8664_pda *oldpda, *newpda; + unsigned long size = sizeof(struct x8664_pda); + int node = cpu_to_node(cpu); + + if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem) + return 0; + + oldpda = cpu_pda(cpu); + newpda = kmalloc_node(size, GFP_ATOMIC, node); + if (!newpda) { + printk(KERN_ERR "Could not allocate node local PDA " + "for CPU %d on node %d\n", cpu, node); + + if (oldpda) + return 0; /* have a usable pda */ + else + return -1; + } + + if (oldpda) { + memcpy(newpda, oldpda, size); + free_bootmem_pda(oldpda); + } + + newpda->in_bootmem = 0; + cpu_pda(cpu) = newpda; + return 0; +} +#endif /* CONFIG_X86_64 */ + static int __cpuinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad @@ -848,28 +812,14 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), }; INIT_WORK(&c_idle.work, do_fork_idle); -#ifdef CONFIG_X86_64 - /* allocate memory for gdts of secondary cpus. Hotplug is considered */ - if (!cpu_gdt_descr[cpu].address && - !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { - printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu); - return -1; - } +#ifdef CONFIG_X86_64 /* Allocate node local memory for AP pdas */ - if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) { - struct x8664_pda *newpda, *pda; - int node = cpu_to_node(cpu); - pda = cpu_pda(cpu); - newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC, - node); - if (newpda) { - memcpy(newpda, pda, sizeof(struct x8664_pda)); - cpu_pda(cpu) = newpda; - } else - printk(KERN_ERR - "Could not allocate node local PDA for CPU %d on node %d\n", - cpu, node); + if (cpu > 0) { + boot_error = get_local_pda(cpu); + if (boot_error) + goto restore_state; + /* if can't get pda memory, can't start cpu */ } #endif @@ -905,18 +855,15 @@ do_rest: #ifdef CONFIG_X86_32 per_cpu(current_task, cpu) = c_idle.idle; init_gdt(cpu); - early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); - c_idle.idle->thread.ip = (unsigned long) start_secondary; /* Stack for startup_32 can be just as for start_secondary onwards */ - stack_start.sp = (void *) c_idle.idle->thread.sp; irq_ctx_init(cpu); #else cpu_pda(cpu)->pcurrent = c_idle.idle; - init_rsp = c_idle.idle->thread.sp; - load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread); - initial_code = (unsigned long)start_secondary; clear_tsk_thread_flag(c_idle.idle, TIF_FORK); #endif + early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); + initial_code = (unsigned long)start_secondary; + stack_start.sp = (void *) c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); @@ -934,7 +881,7 @@ do_rest: if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { - Dprintk("Setting warm reset code and vector.\n"); + pr_debug("Setting warm reset code and vector.\n"); store_NMI_vector(&nmi_high, &nmi_low); @@ -955,9 +902,9 @@ do_rest: /* * allow APs to start initializing. */ - Dprintk("Before Callout %d.\n", cpu); + pr_debug("Before Callout %d.\n", cpu); cpu_set(cpu, cpu_callout_map); - Dprintk("After Callout %d.\n", cpu); + pr_debug("After Callout %d.\n", cpu); /* * Wait 5s total for a response @@ -970,10 +917,10 @@ do_rest: if (cpu_isset(cpu, cpu_callin_map)) { /* number CPUs logically, starting from 1 (BSP is 0) */ - Dprintk("OK.\n"); + pr_debug("OK.\n"); printk(KERN_INFO "CPU%d: ", cpu); print_cpu_info(&cpu_data(cpu)); - Dprintk("CPU has booted.\n"); + pr_debug("CPU has booted.\n"); } else { boot_error = 1; if (*((volatile unsigned char *)trampoline_base) @@ -987,16 +934,14 @@ do_rest: inquire_remote_apic(apicid); } } - - if (boot_error) { - /* Try to put things back the way they were before ... */ - unmap_cpu_to_logical_apicid(cpu); #ifdef CONFIG_X86_64 - clear_node_cpumask(cpu); /* was set by numa_add_cpu */ +restore_state: #endif + if (boot_error) { + /* Try to put things back the way they were before ... */ + numa_remove_cpu(cpu); /* was set by numa_add_cpu */ cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ - cpu_clear(cpu, cpu_possible_map); cpu_clear(cpu, cpu_present_map); per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; } @@ -1020,7 +965,7 @@ int __cpuinit native_cpu_up(unsigned int cpu) WARN_ON(irqs_disabled()); - Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu); + pr_debug("++++++++++++++++++++=_---CPU UP %u\n", cpu); if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid || !physid_isset(apicid, phys_cpu_present_map)) { @@ -1032,7 +977,7 @@ int __cpuinit native_cpu_up(unsigned int cpu) * Already booted CPU? */ if (cpu_isset(cpu, cpu_callin_map)) { - Dprintk("do_boot_cpu %d Already started\n", cpu); + pr_debug("do_boot_cpu %d Already started\n", cpu); return -ENOSYS; } @@ -1059,7 +1004,7 @@ int __cpuinit native_cpu_up(unsigned int cpu) err = do_boot_cpu(apicid, cpu); #endif if (err) { - Dprintk("do_boot_cpu failed %d\n", err); + pr_debug("do_boot_cpu failed %d\n", err); return -EIO; } @@ -1088,14 +1033,12 @@ static __init void disable_smp(void) { cpu_present_map = cpumask_of_cpu(0); cpu_possible_map = cpumask_of_cpu(0); -#ifdef CONFIG_X86_32 smpboot_clear_io_apic_irqs(); -#endif + if (smp_found_config) - phys_cpu_present_map = - physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); else - phys_cpu_present_map = physid_mask_of_physid(0); + physid_set_mask_of_physid(0, &phys_cpu_present_map); map_cpu_to_logical_apicid(); cpu_set(0, per_cpu(cpu_sibling_map, 0)); cpu_set(0, per_cpu(cpu_core_map, 0)); @@ -1107,6 +1050,34 @@ static __init void disable_smp(void) static int __init smp_sanity_check(unsigned max_cpus) { preempt_disable(); + +#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32) + if (def_to_bigsmp && nr_cpu_ids > 8) { + unsigned int cpu; + unsigned nr; + + printk(KERN_WARNING + "More than 8 CPUs detected - skipping them.\n" + "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n"); + + nr = 0; + for_each_present_cpu(cpu) { + if (nr >= 8) + cpu_clear(cpu, cpu_present_map); + nr++; + } + + nr = 0; + for_each_possible_cpu(cpu) { + if (nr >= 8) + cpu_clear(cpu, cpu_possible_map); + nr++; + } + + nr_cpu_ids = 8; + } +#endif + if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { printk(KERN_WARNING "weird, boot CPU (#%d) not listed" "by the BIOS.\n", hard_smp_processor_id()); @@ -1158,12 +1129,12 @@ static int __init smp_sanity_check(unsigned max_cpus) * If SMP should be disabled, then really disable it! */ if (!max_cpus) { - printk(KERN_INFO "SMP mode deactivated," - "forcing use of dummy APIC emulation.\n"); + printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); -#ifdef CONFIG_X86_32 + + localise_nmi_watchdog(); + connect_bsp_APIC(); -#endif setup_local_APIC(); end_local_APIC_setup(); return -1; @@ -1191,7 +1162,6 @@ static void __init smp_cpu_index_default(void) void __init native_smp_prepare_cpus(unsigned int max_cpus) { preempt_disable(); - nmi_watchdog_default(); smp_cpu_index_default(); current_cpu_data = boot_cpu_data; cpu_callin_map = cpumask_of_cpu(0); @@ -1200,10 +1170,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) * Setup boot CPU information */ smp_store_cpu_info(0); /* Final full version of the data */ +#ifdef CONFIG_X86_32 boot_cpu_logical_apicid = logical_smp_processor_id(); +#endif current_thread_info()->cpu = 0; /* needed? */ set_cpu_sibling_map(0); +#ifdef CONFIG_X86_64 + enable_IR_x2apic(); + setup_apic_routing(); +#endif + if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); @@ -1211,16 +1188,15 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) } preempt_disable(); - if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) { + if (read_apic_id() != boot_cpu_physical_apicid) { panic("Boot APIC ID in local APIC unexpected (%d vs %d)", - GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid); + read_apic_id(), boot_cpu_physical_apicid); /* Or can we switch back to PIC here? */ } preempt_enable(); -#ifdef CONFIG_X86_32 connect_bsp_APIC(); -#endif + /* * Switch from PIC to APIC mode. */ @@ -1247,6 +1223,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) printk(KERN_INFO "CPU%d: ", 0); print_cpu_info(&cpu_data(0)); setup_boot_clock(); + + if (is_uv_system()) + uv_system_init(); out: preempt_enable(); } @@ -1258,8 +1237,8 @@ void __init native_smp_prepare_boot_cpu(void) int me = smp_processor_id(); #ifdef CONFIG_X86_32 init_gdt(me); - switch_to_new_gdt(); #endif + switch_to_new_gdt(); /* already set me in cpu_online_map in boot_cpu_init() */ cpu_set(me, cpu_callout_map); per_cpu(cpu_state, me) = CPU_ONLINE; @@ -1267,7 +1246,7 @@ void __init native_smp_prepare_boot_cpu(void) void __init native_smp_cpus_done(unsigned int max_cpus) { - Dprintk("Boot done.\n"); + pr_debug("Boot done.\n"); impress_friends(); smp_checks(); @@ -1279,29 +1258,12 @@ void __init native_smp_cpus_done(unsigned int max_cpus) #ifdef CONFIG_HOTPLUG_CPU -# ifdef CONFIG_X86_32 -void cpu_exit_clear(void) -{ - int cpu = raw_smp_processor_id(); - - idle_task_exit(); - - cpu_uninit(); - irq_ctx_exit(cpu); - - cpu_clear(cpu, cpu_callout_map); - cpu_clear(cpu, cpu_callin_map); - - unmap_cpu_to_logical_apicid(cpu); -} -# endif /* CONFIG_X86_32 */ - static void remove_siblinginfo(int cpu) { int sibling; struct cpuinfo_x86 *c = &cpu_data(cpu); - for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) { + for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) { cpu_clear(cpu, per_cpu(cpu_core_map, sibling)); /*/ * last thread sibling in this cpu core going down @@ -1310,7 +1272,7 @@ static void remove_siblinginfo(int cpu) cpu_data(sibling).booted_cores--; } - for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu)) + for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu)) cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling)); cpus_clear(per_cpu(cpu_sibling_map, cpu)); cpus_clear(per_cpu(cpu_core_map, cpu)); @@ -1349,12 +1311,17 @@ __init void prefill_possible_map(void) int i; int possible; + /* no processor from mptable or madt */ + if (!num_processors) + num_processors = 1; + if (additional_cpus == -1) { if (disabled_cpus > 0) additional_cpus = disabled_cpus; else additional_cpus = 0; } + possible = num_processors + additional_cpus; if (possible > NR_CPUS) possible = NR_CPUS; @@ -1364,21 +1331,43 @@ __init void prefill_possible_map(void) for (i = 0; i < possible; i++) cpu_set(i, cpu_possible_map); + + nr_cpu_ids = possible; } static void __ref remove_cpu_from_maps(int cpu) { cpu_clear(cpu, cpu_online_map); -#ifdef CONFIG_X86_64 cpu_clear(cpu, cpu_callout_map); cpu_clear(cpu, cpu_callin_map); /* was set by cpu_init() */ - clear_bit(cpu, (unsigned long *)&cpu_initialized); - clear_node_cpumask(cpu); -#endif + cpu_clear(cpu, cpu_initialized); + numa_remove_cpu(cpu); +} + +void cpu_disable_common(void) +{ + int cpu = smp_processor_id(); + /* + * HACK: + * Allow any queued timer interrupts to get serviced + * This is only a temporary solution until we cleanup + * fixup_irqs as we do for IA64. + */ + local_irq_enable(); + mdelay(1); + + local_irq_disable(); + remove_siblinginfo(cpu); + + /* It's now safe to remove this processor from the online map */ + lock_vector_lock(); + remove_cpu_from_maps(cpu); + unlock_vector_lock(); + fixup_irqs(cpu_online_map); } -int __cpu_disable(void) +int native_cpu_disable(void) { int cpu = smp_processor_id(); @@ -1397,25 +1386,11 @@ int __cpu_disable(void) stop_apic_nmi_watchdog(NULL); clear_local_APIC(); - /* - * HACK: - * Allow any queued timer interrupts to get serviced - * This is only a temporary solution until we cleanup - * fixup_irqs as we do for IA64. - */ - local_irq_enable(); - mdelay(1); - - local_irq_disable(); - remove_siblinginfo(cpu); - - /* It's now safe to remove this processor from the online map */ - remove_cpu_from_maps(cpu); - fixup_irqs(cpu_online_map); + cpu_disable_common(); return 0; } -void __cpu_die(unsigned int cpu) +void native_cpu_die(unsigned int cpu) { /* We don't do anything here: idle task is faking death itself. */ unsigned int i; @@ -1432,28 +1407,45 @@ void __cpu_die(unsigned int cpu) } printk(KERN_ERR "CPU %u didn't die...\n", cpu); } + +void play_dead_common(void) +{ + idle_task_exit(); + reset_lazy_tlbstate(); + irq_ctx_exit(raw_smp_processor_id()); + c1e_remove_cpu(raw_smp_processor_id()); + + mb(); + /* Ack it */ + __get_cpu_var(cpu_state) = CPU_DEAD; + + /* + * With physical CPU hotplug, we should halt the cpu + */ + local_irq_disable(); +} + +void native_play_dead(void) +{ + play_dead_common(); + wbinvd_halt(); +} + #else /* ... !CONFIG_HOTPLUG_CPU */ -int __cpu_disable(void) +int native_cpu_disable(void) { return -ENOSYS; } -void __cpu_die(unsigned int cpu) +void native_cpu_die(unsigned int cpu) { /* We said "no" in __cpu_disable */ BUG(); } -#endif -/* - * If the BIOS enumerates physical processors before logical, - * maxcpus=N at enumeration-time can be used to disable HT. - */ -static int __init parse_maxcpus(char *arg) +void native_play_dead(void) { - extern unsigned int maxcpus; - - maxcpus = simple_strtoul(arg, NULL, 0); - return 0; + BUG(); } -early_param("maxcpus", parse_maxcpus); + +#endif diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c index 3449064d141..397e309839d 100644 --- a/arch/x86/kernel/smpcommon.c +++ b/arch/x86/kernel/smpcommon.c @@ -8,76 +8,23 @@ DEFINE_PER_CPU(unsigned long, this_cpu_off); EXPORT_PER_CPU_SYMBOL(this_cpu_off); -/* Initialize the CPU's GDT. This is either the boot CPU doing itself - (still using the master per-cpu area), or a CPU doing it for a - secondary which will soon come up. */ +/* + * Initialize the CPU's GDT. This is either the boot CPU doing itself + * (still using the master per-cpu area), or a CPU doing it for a + * secondary which will soon come up. + */ __cpuinit void init_gdt(int cpu) { - struct desc_struct *gdt = get_cpu_gdt_table(cpu); + struct desc_struct gdt; - pack_descriptor(&gdt[GDT_ENTRY_PERCPU], - __per_cpu_offset[cpu], 0xFFFFF, + pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF, 0x2 | DESCTYPE_S, 0x8); + gdt.s = 1; - gdt[GDT_ENTRY_PERCPU].s = 1; + write_gdt_entry(get_cpu_gdt_table(cpu), + GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S); per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu]; per_cpu(cpu_number, cpu) = cpu; } #endif - -/** - * smp_call_function(): Run a function on all other CPUs. - * @func: The function to run. This must be fast and non-blocking. - * @info: An arbitrary pointer to pass to the function. - * @nonatomic: Unused. - * @wait: If true, wait (atomically) until function has completed on other CPUs. - * - * Returns 0 on success, else a negative status code. - * - * If @wait is true, then returns once @func has returned; otherwise - * it returns just before the target cpu calls @func. - * - * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. - */ -int smp_call_function(void (*func) (void *info), void *info, int nonatomic, - int wait) -{ - return smp_call_function_mask(cpu_online_map, func, info, wait); -} -EXPORT_SYMBOL(smp_call_function); - -/** - * smp_call_function_single - Run a function on a specific CPU - * @cpu: The target CPU. Cannot be the calling CPU. - * @func: The function to run. This must be fast and non-blocking. - * @info: An arbitrary pointer to pass to the function. - * @nonatomic: Unused. - * @wait: If true, wait until function has completed on other CPUs. - * - * Returns 0 on success, else a negative status code. - * - * If @wait is true, then returns once @func has returned; otherwise - * it returns just before the target cpu calls @func. - */ -int smp_call_function_single(int cpu, void (*func) (void *info), void *info, - int nonatomic, int wait) -{ - /* prevent preemption and reschedule on another processor */ - int ret; - int me = get_cpu(); - if (cpu == me) { - local_irq_disable(); - func(info); - local_irq_enable(); - put_cpu(); - return 0; - } - - ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait); - - put_cpu(); - return ret; -} -EXPORT_SYMBOL(smp_call_function_single); diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c deleted file mode 100644 index 8b137891791..00000000000 --- a/arch/x86/kernel/smpcommon_32.c +++ /dev/null @@ -1 +0,0 @@ - diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c deleted file mode 100644 index 70e4a374b4e..00000000000 --- a/arch/x86/kernel/srat_32.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Some of the code in this file has been gleaned from the 64 bit - * discontigmem support code base. - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to Pat Gaughen <gone@us.ibm.com> - */ -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/mmzone.h> -#include <linux/acpi.h> -#include <linux/nodemask.h> -#include <asm/srat.h> -#include <asm/topology.h> -#include <asm/smp.h> - -/* - * proximity macros and definitions - */ -#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */ -#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */ -#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit)) -#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit))) -/* bitmap length; _PXM is at most 255 */ -#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) -static u8 pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ - -#define MAX_CHUNKS_PER_NODE 3 -#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) -struct node_memory_chunk_s { - unsigned long start_pfn; - unsigned long end_pfn; - u8 pxm; // proximity domain of node - u8 nid; // which cnode contains this chunk? - u8 bank; // which mem bank on this node -}; -static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS]; - -static int num_memory_chunks; /* total number of memory chunks */ -static u8 __initdata apicid_to_pxm[MAX_APICID]; - -/* Identify CPU proximity domains */ -static void __init parse_cpu_affinity_structure(char *p) -{ - struct acpi_srat_cpu_affinity *cpu_affinity = - (struct acpi_srat_cpu_affinity *) p; - - if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) - return; /* empty entry */ - - /* mark this node as "seen" in node bitmap */ - BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); - - apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; - - printk("CPU 0x%02X in proximity domain 0x%02X\n", - cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); -} - -/* - * Identify memory proximity domains and hot-remove capabilities. - * Fill node memory chunk list structure. - */ -static void __init parse_memory_affinity_structure (char *sratp) -{ - unsigned long long paddr, size; - unsigned long start_pfn, end_pfn; - u8 pxm; - struct node_memory_chunk_s *p, *q, *pend; - struct acpi_srat_mem_affinity *memory_affinity = - (struct acpi_srat_mem_affinity *) sratp; - - if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) - return; /* empty entry */ - - pxm = memory_affinity->proximity_domain & 0xff; - - /* mark this node as "seen" in node bitmap */ - BMAP_SET(pxm_bitmap, pxm); - - /* calculate info for memory chunk structure */ - paddr = memory_affinity->base_address; - size = memory_affinity->length; - - start_pfn = paddr >> PAGE_SHIFT; - end_pfn = (paddr + size) >> PAGE_SHIFT; - - - if (num_memory_chunks >= MAXCHUNKS) { - printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n", - size/(1024*1024), paddr); - return; - } - - /* Insertion sort based on base address */ - pend = &node_memory_chunk[num_memory_chunks]; - for (p = &node_memory_chunk[0]; p < pend; p++) { - if (start_pfn < p->start_pfn) - break; - } - if (p < pend) { - for (q = pend; q >= p; q--) - *(q + 1) = *q; - } - p->start_pfn = start_pfn; - p->end_pfn = end_pfn; - p->pxm = pxm; - - num_memory_chunks++; - - printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n", - start_pfn, end_pfn, - memory_affinity->memory_type, - pxm, - ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? - "enabled and removable" : "enabled" ) ); -} - -/* - * The SRAT table always lists ascending addresses, so can always - * assume that the first "start" address that you see is the real - * start of the node, and that the current "end" address is after - * the previous one. - */ -static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) -{ - /* - * Only add present memory as told by the e820. - * There is no guarantee from the SRAT that the memory it - * enumerates is present at boot time because it represents - * *possible* memory hotplug areas the same as normal RAM. - */ - if (memory_chunk->start_pfn >= max_pfn) { - printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n", - memory_chunk->start_pfn, memory_chunk->end_pfn); - return; - } - if (memory_chunk->nid != nid) - return; - - if (!node_has_online_mem(nid)) - node_start_pfn[nid] = memory_chunk->start_pfn; - - if (node_start_pfn[nid] > memory_chunk->start_pfn) - node_start_pfn[nid] = memory_chunk->start_pfn; - - if (node_end_pfn[nid] < memory_chunk->end_pfn) - node_end_pfn[nid] = memory_chunk->end_pfn; -} - -/* Parse the ACPI Static Resource Affinity Table */ -static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) -{ - u8 *start, *end, *p; - int i, j, nid; - - start = (u8 *)(&(sratp->reserved) + 1); /* skip header */ - p = start; - end = (u8 *)sratp + sratp->header.length; - - memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */ - memset(node_memory_chunk, 0, sizeof(node_memory_chunk)); - - num_memory_chunks = 0; - while (p < end) { - switch (*p) { - case ACPI_SRAT_TYPE_CPU_AFFINITY: - parse_cpu_affinity_structure(p); - break; - case ACPI_SRAT_TYPE_MEMORY_AFFINITY: - parse_memory_affinity_structure(p); - break; - default: - printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]); - break; - } - p += p[1]; - if (p[1] == 0) { - printk("acpi20_parse_srat: Entry length value is zero;" - " can't parse any further!\n"); - break; - } - } - - if (num_memory_chunks == 0) { - printk("could not finy any ACPI SRAT memory areas.\n"); - goto out_fail; - } - - /* Calculate total number of nodes in system from PXM bitmap and create - * a set of sequential node IDs starting at zero. (ACPI doesn't seem - * to specify the range of _PXM values.) - */ - /* - * MCD - we no longer HAVE to number nodes sequentially. PXM domain - * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically - * 32, so we will continue numbering them in this manner until MAX_NUMNODES - * approaches MAX_PXM_DOMAINS for i386. - */ - nodes_clear(node_online_map); - for (i = 0; i < MAX_PXM_DOMAINS; i++) { - if (BMAP_TEST(pxm_bitmap, i)) { - int nid = acpi_map_pxm_to_node(i); - node_set_online(nid); - } - } - BUG_ON(num_online_nodes() == 0); - - /* set cnode id in memory chunk structure */ - for (i = 0; i < num_memory_chunks; i++) - node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm); - - printk("pxm bitmap: "); - for (i = 0; i < sizeof(pxm_bitmap); i++) { - printk("%02X ", pxm_bitmap[i]); - } - printk("\n"); - printk("Number of logical nodes in system = %d\n", num_online_nodes()); - printk("Number of memory chunks in system = %d\n", num_memory_chunks); - - for (i = 0; i < MAX_APICID; i++) - apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); - - for (j = 0; j < num_memory_chunks; j++){ - struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; - printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", - j, chunk->nid, chunk->start_pfn, chunk->end_pfn); - node_read_chunk(chunk->nid, chunk); - add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn); - } - - for_each_online_node(nid) { - unsigned long start = node_start_pfn[nid]; - unsigned long end = node_end_pfn[nid]; - - memory_present(nid, start, end); - node_remap_size[nid] = node_memmap_size_bytes(nid, start, end); - } - return 1; -out_fail: - return 0; -} - -struct acpi_static_rsdt { - struct acpi_table_rsdt table; - u32 padding[7]; /* Allow for 7 more table entries */ -}; - -int __init get_memcfg_from_srat(void) -{ - struct acpi_table_header *header = NULL; - struct acpi_table_rsdp *rsdp = NULL; - struct acpi_table_rsdt *rsdt = NULL; - acpi_native_uint rsdp_address = 0; - struct acpi_static_rsdt saved_rsdt; - int tables = 0; - int i = 0; - - rsdp_address = acpi_os_get_root_pointer(); - if (!rsdp_address) { - printk("%s: System description tables not found\n", - __func__); - goto out_err; - } - - printk("%s: assigning address to rsdp\n", __func__); - rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address; - if (!rsdp) { - printk("%s: Didn't find ACPI root!\n", __func__); - goto out_err; - } - - printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision, - rsdp->oem_id); - - if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) { - printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __func__); - goto out_err; - } - - rsdt = (struct acpi_table_rsdt *) - early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt)); - - if (!rsdt) { - printk(KERN_WARNING - "%s: ACPI: Invalid root system description tables (RSDT)\n", - __func__); - goto out_err; - } - - header = &rsdt->header; - - if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { - printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); - goto out_err; - } - - /* - * The number of tables is computed by taking the - * size of all entries (header size minus total - * size of RSDT) divided by the size of each entry - * (4-byte table pointers). - */ - tables = (header->length - sizeof(struct acpi_table_header)) / 4; - - if (!tables) - goto out_err; - - memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); - - if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { - printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", - saved_rsdt.table.header.length); - goto out_err; - } - - printk("Begin SRAT table scan....\n"); - - for (i = 0; i < tables; i++) { - /* Map in header, then map in full table length. */ - header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); - if (!header) - break; - header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length); - if (!header) - break; - - if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) - continue; - - /* we've found the srat table. don't need to look at any more tables */ - return acpi20_parse_srat((struct acpi_table_srat *)header); - } -out_err: - remove_all_active_ranges(); - printk("failed to get NUMA memory information from SRAT table\n"); - return 0; -} diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index c28c342c162..a03e7f6d90c 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -74,6 +74,7 @@ void save_stack_trace(struct stack_trace *trace) if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } +EXPORT_SYMBOL_GPL(save_stack_trace); void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { @@ -81,3 +82,4 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index 92c20fee678..e8b9863ef8c 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -105,6 +105,20 @@ static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) static int enable_single_step(struct task_struct *child) { struct pt_regs *regs = task_pt_regs(child); + unsigned long oflags; + + /* + * If we stepped into a sysenter/syscall insn, it trapped in + * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP. + * If user-mode had set TF itself, then it's still clear from + * do_debug() and we need to set it again to restore the user + * state so we don't wrongly set TIF_FORCED_TF below. + * If enable_single_step() was used last and that is what + * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are + * already set and our bookkeeping is fine. + */ + if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP))) + regs->flags |= X86_EFLAGS_TF; /* * Always set TIF_SINGLESTEP - this guarantees that @@ -113,11 +127,7 @@ static int enable_single_step(struct task_struct *child) */ set_tsk_thread_flag(child, TIF_SINGLESTEP); - /* - * If TF was already set, don't do anything else - */ - if (regs->flags & X86_EFLAGS_TF) - return 0; + oflags = regs->flags; /* Set TF on the kernel stack.. */ regs->flags |= X86_EFLAGS_TF; @@ -126,9 +136,22 @@ static int enable_single_step(struct task_struct *child) * ..but if TF is changed by the instruction we will trace, * don't mark it as being "us" that set it, so that we * won't clear it by hand later. + * + * Note that if we don't actually execute the popf because + * of a signal arriving right now or suchlike, we will lose + * track of the fact that it really was "us" that set it. */ - if (is_setting_trap_flag(child, regs)) + if (is_setting_trap_flag(child, regs)) { + clear_tsk_thread_flag(child, TIF_FORCED_TF); return 0; + } + + /* + * If TF was already set, check whether it was us who set it. + * If not, we should never attempt a block step. + */ + if (oflags & X86_EFLAGS_TF) + return test_tsk_thread_flag(child, TIF_FORCED_TF); set_tsk_thread_flag(child, TIF_FORCED_TF); diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c index ae751094eba..7b987852e87 100644 --- a/arch/x86/kernel/summit_32.c +++ b/arch/x86/kernel/summit_32.c @@ -30,13 +30,15 @@ #include <linux/init.h> #include <asm/io.h> #include <asm/bios_ebda.h> -#include <asm/mach-summit/mach_mpparse.h> +#include <asm/summit/mpparse.h> static struct rio_table_hdr *rio_table_hdr __initdata; static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata; +#ifndef CONFIG_X86_NUMAQ static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata; +#endif static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) { diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index d2ab52cc1d6..1884a8d12bf 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -19,8 +19,10 @@ #include <linux/utsname.h> #include <linux/ipc.h> -#include <asm/uaccess.h> -#include <asm/unistd.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> + +#include <asm/syscalls.h> asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, @@ -103,7 +105,7 @@ asmlinkage int old_select(struct sel_arg_struct __user *arg) * * This is really horribly ugly. */ -asmlinkage int sys_ipc (uint call, int first, int second, +asmlinkage int sys_ipc(uint call, int first, int second, int third, void __user *ptr, long fifth) { int version, ret; @@ -113,24 +115,24 @@ asmlinkage int sys_ipc (uint call, int first, int second, switch (call) { case SEMOP: - return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL); + return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL); case SEMTIMEDOP: return sys_semtimedop(first, (struct sembuf __user *)ptr, second, (const struct timespec __user *)fifth); case SEMGET: - return sys_semget (first, second, third); + return sys_semget(first, second, third); case SEMCTL: { union semun fourth; if (!ptr) return -EINVAL; if (get_user(fourth.__pad, (void __user * __user *) ptr)) return -EFAULT; - return sys_semctl (first, second, third, fourth); + return sys_semctl(first, second, third, fourth); } case MSGSND: - return sys_msgsnd (first, (struct msgbuf __user *) ptr, + return sys_msgsnd(first, (struct msgbuf __user *) ptr, second, third); case MSGRCV: switch (version) { @@ -138,45 +140,45 @@ asmlinkage int sys_ipc (uint call, int first, int second, struct ipc_kludge tmp; if (!ptr) return -EINVAL; - + if (copy_from_user(&tmp, - (struct ipc_kludge __user *) ptr, - sizeof (tmp))) + (struct ipc_kludge __user *) ptr, + sizeof(tmp))) return -EFAULT; - return sys_msgrcv (first, tmp.msgp, second, + return sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, third); } default: - return sys_msgrcv (first, + return sys_msgrcv(first, (struct msgbuf __user *) ptr, second, fifth, third); } case MSGGET: - return sys_msgget ((key_t) first, second); + return sys_msgget((key_t) first, second); case MSGCTL: - return sys_msgctl (first, second, (struct msqid_ds __user *) ptr); + return sys_msgctl(first, second, (struct msqid_ds __user *) ptr); case SHMAT: switch (version) { default: { ulong raddr; - ret = do_shmat (first, (char __user *) ptr, second, &raddr); + ret = do_shmat(first, (char __user *) ptr, second, &raddr); if (ret) return ret; - return put_user (raddr, (ulong __user *) third); + return put_user(raddr, (ulong __user *) third); } case 1: /* iBCS2 emulator entry point */ if (!segment_eq(get_fs(), get_ds())) return -EINVAL; /* The "(ulong *) third" is valid _only_ because of the kernel segment thing */ - return do_shmat (first, (char __user *) ptr, second, (ulong *) third); + return do_shmat(first, (char __user *) ptr, second, (ulong *) third); } - case SHMDT: - return sys_shmdt ((char __user *)ptr); + case SHMDT: + return sys_shmdt((char __user *)ptr); case SHMGET: - return sys_shmget (first, second, third); + return sys_shmget(first, second, third); case SHMCTL: - return sys_shmctl (first, second, + return sys_shmctl(first, second, (struct shmid_ds __user *) ptr); default: return -ENOSYS; @@ -186,28 +188,28 @@ asmlinkage int sys_ipc (uint call, int first, int second, /* * Old cruft */ -asmlinkage int sys_uname(struct old_utsname __user * name) +asmlinkage int sys_uname(struct old_utsname __user *name) { int err; if (!name) return -EFAULT; down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); + err = copy_to_user(name, utsname(), sizeof(*name)); up_read(&uts_sem); - return err?-EFAULT:0; + return err? -EFAULT:0; } -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +asmlinkage int sys_olduname(struct oldold_utsname __user *name) { int error; if (!name) return -EFAULT; - if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) + if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname))) return -EFAULT; - - down_read(&uts_sem); - + + down_read(&uts_sem); + error = __copy_to_user(&name->sysname, &utsname()->sysname, __OLD_UTS_LEN); error |= __put_user(0, name->sysname + __OLD_UTS_LEN); @@ -223,9 +225,9 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) error |= __copy_to_user(&name->machine, &utsname()->machine, __OLD_UTS_LEN); error |= __put_user(0, name->machine + __OLD_UTS_LEN); - + up_read(&uts_sem); - + error = error ? -EFAULT : 0; return error; @@ -241,6 +243,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) long __res; asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" : "=a" (__res) - : "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory"); + : "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory"); return __res; } diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 3b360ef3381..6bc211accf0 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -13,15 +13,17 @@ #include <linux/utsname.h> #include <linux/personality.h> #include <linux/random.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/ia32.h> +#include <asm/syscalls.h> -asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long off) +asmlinkage long sys_mmap(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long off) { long error; - struct file * file; + struct file *file; error = -EINVAL; if (off & ~PAGE_MASK) @@ -56,9 +58,9 @@ static void find_start_end(unsigned long flags, unsigned long *begin, unmapped base down for this case. This can give conflicts with the heap, but we assume that glibc malloc knows how to fall back to mmap. Give it 1GB - of playground for now. -AK */ - *begin = 0x40000000; - *end = 0x80000000; + of playground for now. -AK */ + *begin = 0x40000000; + *end = 0x80000000; if (current->flags & PF_RANDOMIZE) { new_begin = randomize_range(*begin, *begin + 0x02000000, 0); if (new_begin) @@ -66,9 +68,9 @@ static void find_start_end(unsigned long flags, unsigned long *begin, } } else { *begin = TASK_UNMAPPED_BASE; - *end = TASK_SIZE; + *end = TASK_SIZE; } -} +} unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, @@ -78,11 +80,11 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, struct vm_area_struct *vma; unsigned long start_addr; unsigned long begin, end; - + if (flags & MAP_FIXED) return addr; - find_start_end(flags, &begin, &end); + find_start_end(flags, &begin, &end); if (len > end) return -ENOMEM; @@ -96,12 +98,12 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, } if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32)) && len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; + mm->cached_hole_size = 0; mm->free_area_cache = begin; } addr = mm->free_area_cache; - if (addr < begin) - addr = begin; + if (addr < begin) + addr = begin; start_addr = addr; full_search: @@ -127,7 +129,7 @@ full_search: return addr; } if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; + mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; } @@ -177,7 +179,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, vma = find_vma(mm, addr-len); if (!vma || addr <= vma->vm_start) /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); + return mm->free_area_cache = addr-len; } if (mm->mmap_base < len) @@ -194,7 +196,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, vma = find_vma(mm, addr); if (!vma || addr+len <= vma->vm_start) /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); + return mm->free_area_cache = addr; /* remember the largest hole we saw so far */ if (addr + mm->cached_hole_size < vma->vm_start) @@ -224,13 +226,13 @@ bottomup: } -asmlinkage long sys_uname(struct new_utsname __user * name) +asmlinkage long sys_uname(struct new_utsname __user *name) { int err; down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); + err = copy_to_user(name, utsname(), sizeof(*name)); up_read(&uts_sem); - if (personality(current->personality) == PER_LINUX32) - err |= copy_to_user(&name->machine, "i686", 5); + if (personality(current->personality) == PER_LINUX32) + err |= copy_to_user(&name->machine, "i686", 5); return err ? -EFAULT : 0; } diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c index 170d43c1748..3d1be4f0fac 100644 --- a/arch/x86/kernel/syscall_64.c +++ b/arch/x86/kernel/syscall_64.c @@ -8,12 +8,12 @@ #define __NO_STUBS #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ; -#undef _ASM_X86_64_UNISTD_H_ +#undef ASM_X86__UNISTD_64_H #include <asm/unistd_64.h> #undef __SYSCALL #define __SYSCALL(nr, sym) [nr] = sym, -#undef _ASM_X86_64_UNISTD_H_ +#undef ASM_X86__UNISTD_64_H typedef void (*sys_call_ptr_t)(void); diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index adff5562f5f..d44395ff34c 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -326,3 +326,9 @@ ENTRY(sys_call_table) .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 2ff21f39893..bbecf8b6bf9 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -36,12 +36,10 @@ #include <asm/arch_hooks.h> #include <asm/hpet.h> #include <asm/time.h> +#include <asm/timer.h> #include "do_timer.h" -unsigned int cpu_khz; /* Detected as we calibrate the TSC */ -EXPORT_SYMBOL(cpu_khz); - int timer_ack; unsigned long profile_pc(struct pt_regs *regs) @@ -84,8 +82,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) if (timer_ack) { /* * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to reset the IRR bit for do_slow_gettimeoffset(). - * This will also deassert NMI lines for the watchdog if run + * manually to deassert NMI lines for the watchdog if run * on an 82489DX-based system. */ spin_lock(&i8259A_lock); @@ -133,6 +130,7 @@ void __init hpet_time_init(void) */ void __init time_init(void) { + pre_time_init_hook(); tsc_init(); late_time_init = choose_time_init(); } diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c index c737849e2ef..e3d49c553af 100644 --- a/arch/x86/kernel/time_64.c +++ b/arch/x86/kernel/time_64.c @@ -56,7 +56,7 @@ static irqreturn_t timer_event_interrupt(int irq, void *dev_id) /* calibrate_cpu is used on systems with fixed rate TSCs to determine * processor frequency */ #define TICK_COUNT 100000000 -unsigned long __init native_calculate_cpu_khz(void) +unsigned long __init calibrate_cpu(void) { int tsc_start, tsc_now; int i, no_ctr_free; @@ -116,23 +116,11 @@ void __init hpet_time_init(void) void __init time_init(void) { - tsc_calibrate(); - - cpu_khz = tsc_khz; - if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && - (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)) - cpu_khz = calculate_cpu_khz(); - - if (unsynchronized_tsc()) - mark_tsc_unstable("TSCs unsynchronized"); - + tsc_init(); if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) vgetcpu_mode = VGETCPU_RDTSCP; else vgetcpu_mode = VGETCPU_LSL; - printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - init_tsc_clocksource(); late_time_init = choose_time_init(); } diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c index 9bb2363851a..e00534b3353 100644 --- a/arch/x86/kernel/tlb_32.c +++ b/arch/x86/kernel/tlb_32.c @@ -238,6 +238,14 @@ static void do_flush_tlb_all(void *info) void flush_tlb_all(void) { - on_each_cpu(do_flush_tlb_all, NULL, 1, 1); + on_each_cpu(do_flush_tlb_all, NULL, 1); +} + +void reset_lazy_tlbstate(void) +{ + int cpu = raw_smp_processor_id(); + + per_cpu(cpu_tlbstate, cpu).state = 0; + per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; } diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c index a1f07d79320..dcbf7a1159e 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/kernel/tlb_64.c @@ -15,6 +15,8 @@ #include <asm/proto.h> #include <asm/apicdef.h> #include <asm/idle.h> +#include <asm/uv/uv_hub.h> +#include <asm/uv/uv_bau.h> #include <mach_ipi.h> /* @@ -162,6 +164,9 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, union smp_flush_state *f; cpumask_t cpumask = *cpumaskp; + if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va)) + return; + /* Caller has disabled preemption */ sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; f = &per_cpu(flush_state, sender); @@ -270,5 +275,5 @@ static void do_flush_tlb_all(void *info) void flush_tlb_all(void) { - on_each_cpu(do_flush_tlb_all, NULL, 1, 1); + on_each_cpu(do_flush_tlb_all, NULL, 1); } diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c new file mode 100644 index 00000000000..8b8c0d6640f --- /dev/null +++ b/arch/x86/kernel/tlb_uv.c @@ -0,0 +1,793 @@ +/* + * SGI UltraViolet TLB flush routines. + * + * (c) 2008 Cliff Wickman <cpw@sgi.com>, SGI. + * + * This code is released under the GNU General Public License version 2 or + * later. + */ +#include <linux/mc146818rtc.h> +#include <linux/proc_fs.h> +#include <linux/kernel.h> + +#include <asm/mmu_context.h> +#include <asm/uv/uv_mmrs.h> +#include <asm/uv/uv_hub.h> +#include <asm/uv/uv_bau.h> +#include <asm/genapic.h> +#include <asm/idle.h> +#include <asm/tsc.h> +#include <asm/irq_vectors.h> + +#include <mach_apic.h> + +static struct bau_control **uv_bau_table_bases __read_mostly; +static int uv_bau_retry_limit __read_mostly; + +/* position of pnode (which is nasid>>1): */ +static int uv_nshift __read_mostly; + +static unsigned long uv_mmask __read_mostly; + +static DEFINE_PER_CPU(struct ptc_stats, ptcstats); +static DEFINE_PER_CPU(struct bau_control, bau_control); + +/* + * Free a software acknowledge hardware resource by clearing its Pending + * bit. This will return a reply to the sender. + * If the message has timed out, a reply has already been sent by the + * hardware but the resource has not been released. In that case our + * clear of the Timeout bit (as well) will free the resource. No reply will + * be sent (the hardware will only do one reply per message). + */ +static void uv_reply_to_message(int resource, + struct bau_payload_queue_entry *msg, + struct bau_msg_status *msp) +{ + unsigned long dw; + + dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource); + msg->replied_to = 1; + msg->sw_ack_vector = 0; + if (msp) + msp->seen_by.bits = 0; + uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw); +} + +/* + * Do all the things a cpu should do for a TLB shootdown message. + * Other cpu's may come here at the same time for this message. + */ +static void uv_bau_process_message(struct bau_payload_queue_entry *msg, + int msg_slot, int sw_ack_slot) +{ + unsigned long this_cpu_mask; + struct bau_msg_status *msp; + int cpu; + + msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; + cpu = uv_blade_processor_id(); + msg->number_of_cpus = + uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); + this_cpu_mask = 1UL << cpu; + if (msp->seen_by.bits & this_cpu_mask) + return; + atomic_or_long(&msp->seen_by.bits, this_cpu_mask); + + if (msg->replied_to == 1) + return; + + if (msg->address == TLB_FLUSH_ALL) { + local_flush_tlb(); + __get_cpu_var(ptcstats).alltlb++; + } else { + __flush_tlb_one(msg->address); + __get_cpu_var(ptcstats).onetlb++; + } + + __get_cpu_var(ptcstats).requestee++; + + atomic_inc_short(&msg->acknowledge_count); + if (msg->number_of_cpus == msg->acknowledge_count) + uv_reply_to_message(sw_ack_slot, msg, msp); +} + +/* + * Examine the payload queue on one distribution node to see + * which messages have not been seen, and which cpu(s) have not seen them. + * + * Returns the number of cpu's that have not responded. + */ +static int uv_examine_destination(struct bau_control *bau_tablesp, int sender) +{ + struct bau_payload_queue_entry *msg; + struct bau_msg_status *msp; + int count = 0; + int i; + int j; + + for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE; + msg++, i++) { + if ((msg->sending_cpu == sender) && (!msg->replied_to)) { + msp = bau_tablesp->msg_statuses + i; + printk(KERN_DEBUG + "blade %d: address:%#lx %d of %d, not cpu(s): ", + i, msg->address, msg->acknowledge_count, + msg->number_of_cpus); + for (j = 0; j < msg->number_of_cpus; j++) { + if (!((1L << j) & msp->seen_by.bits)) { + count++; + printk("%d ", j); + } + } + printk("\n"); + } + } + return count; +} + +/* + * Examine the payload queue on all the distribution nodes to see + * which messages have not been seen, and which cpu(s) have not seen them. + * + * Returns the number of cpu's that have not responded. + */ +static int uv_examine_destinations(struct bau_target_nodemask *distribution) +{ + int sender; + int i; + int count = 0; + + sender = smp_processor_id(); + for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) { + if (!bau_node_isset(i, distribution)) + continue; + count += uv_examine_destination(uv_bau_table_bases[i], sender); + } + return count; +} + +/* + * wait for completion of a broadcast message + * + * return COMPLETE, RETRY or GIVEUP + */ +static int uv_wait_completion(struct bau_desc *bau_desc, + unsigned long mmr_offset, int right_shift) +{ + int exams = 0; + long destination_timeouts = 0; + long source_timeouts = 0; + unsigned long descriptor_status; + + while ((descriptor_status = (((unsigned long) + uv_read_local_mmr(mmr_offset) >> + right_shift) & UV_ACT_STATUS_MASK)) != + DESC_STATUS_IDLE) { + if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { + source_timeouts++; + if (source_timeouts > SOURCE_TIMEOUT_LIMIT) + source_timeouts = 0; + __get_cpu_var(ptcstats).s_retry++; + return FLUSH_RETRY; + } + /* + * spin here looking for progress at the destinations + */ + if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) { + destination_timeouts++; + if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) { + /* + * returns number of cpus not responding + */ + if (uv_examine_destinations + (&bau_desc->distribution) == 0) { + __get_cpu_var(ptcstats).d_retry++; + return FLUSH_RETRY; + } + exams++; + if (exams >= uv_bau_retry_limit) { + printk(KERN_DEBUG + "uv_flush_tlb_others"); + printk("giving up on cpu %d\n", + smp_processor_id()); + return FLUSH_GIVEUP; + } + /* + * delays can hang the simulator + udelay(1000); + */ + destination_timeouts = 0; + } + } + } + return FLUSH_COMPLETE; +} + +/** + * uv_flush_send_and_wait + * + * Send a broadcast and wait for a broadcast message to complete. + * + * The cpumaskp mask contains the cpus the broadcast was sent to. + * + * Returns 1 if all remote flushing was done. The mask is zeroed. + * Returns 0 if some remote flushing remains to be done. The mask is left + * unchanged. + */ +int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc, + cpumask_t *cpumaskp) +{ + int completion_status = 0; + int right_shift; + int tries = 0; + int blade; + int bit; + unsigned long mmr_offset; + unsigned long index; + cycles_t time1; + cycles_t time2; + + if (cpu < UV_CPUS_PER_ACT_STATUS) { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; + right_shift = cpu * UV_ACT_STATUS_SIZE; + } else { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; + right_shift = + ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE); + } + time1 = get_cycles(); + do { + tries++; + index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | + cpu; + uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); + completion_status = uv_wait_completion(bau_desc, mmr_offset, + right_shift); + } while (completion_status == FLUSH_RETRY); + time2 = get_cycles(); + __get_cpu_var(ptcstats).sflush += (time2 - time1); + if (tries > 1) + __get_cpu_var(ptcstats).retriesok++; + + if (completion_status == FLUSH_GIVEUP) { + /* + * Cause the caller to do an IPI-style TLB shootdown on + * the cpu's, all of which are still in the mask. + */ + __get_cpu_var(ptcstats).ptc_i++; + return 0; + } + + /* + * Success, so clear the remote cpu's from the mask so we don't + * use the IPI method of shootdown on them. + */ + for_each_cpu_mask(bit, *cpumaskp) { + blade = uv_cpu_to_blade_id(bit); + if (blade == this_blade) + continue; + cpu_clear(bit, *cpumaskp); + } + if (!cpus_empty(*cpumaskp)) + return 0; + return 1; +} + +/** + * uv_flush_tlb_others - globally purge translation cache of a virtual + * address or all TLB's + * @cpumaskp: mask of all cpu's in which the address is to be removed + * @mm: mm_struct containing virtual address range + * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu) + * + * This is the entry point for initiating any UV global TLB shootdown. + * + * Purges the translation caches of all specified processors of the given + * virtual address, or purges all TLB's on specified processors. + * + * The caller has derived the cpumaskp from the mm_struct and has subtracted + * the local cpu from the mask. This function is called only if there + * are bits set in the mask. (e.g. flush_tlb_page()) + * + * The cpumaskp is converted into a nodemask of the nodes containing + * the cpus. + * + * Returns 1 if all remote flushing was done. + * Returns 0 if some remote flushing remains to be done. + */ +int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, + unsigned long va) +{ + int i; + int bit; + int blade; + int cpu; + int this_blade; + int locals = 0; + struct bau_desc *bau_desc; + + cpu = uv_blade_processor_id(); + this_blade = uv_numa_blade_id(); + bau_desc = __get_cpu_var(bau_control).descriptor_base; + bau_desc += UV_ITEMS_PER_DESCRIPTOR * cpu; + + bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); + + i = 0; + for_each_cpu_mask(bit, *cpumaskp) { + blade = uv_cpu_to_blade_id(bit); + BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); + if (blade == this_blade) { + locals++; + continue; + } + bau_node_set(blade, &bau_desc->distribution); + i++; + } + if (i == 0) { + /* + * no off_node flushing; return status for local node + */ + if (locals) + return 0; + else + return 1; + } + __get_cpu_var(ptcstats).requestor++; + __get_cpu_var(ptcstats).ntargeted += i; + + bau_desc->payload.address = va; + bau_desc->payload.sending_cpu = smp_processor_id(); + + return uv_flush_send_and_wait(cpu, this_blade, bau_desc, cpumaskp); +} + +/* + * The BAU message interrupt comes here. (registered by set_intr_gate) + * See entry_64.S + * + * We received a broadcast assist message. + * + * Interrupts may have been disabled; this interrupt could represent + * the receipt of several messages. + * + * All cores/threads on this node get this interrupt. + * The last one to see it does the s/w ack. + * (the resource will not be freed until noninterruptable cpus see this + * interrupt; hardware will timeout the s/w ack and reply ERROR) + */ +void uv_bau_message_interrupt(struct pt_regs *regs) +{ + struct bau_payload_queue_entry *va_queue_first; + struct bau_payload_queue_entry *va_queue_last; + struct bau_payload_queue_entry *msg; + struct pt_regs *old_regs = set_irq_regs(regs); + cycles_t time1; + cycles_t time2; + int msg_slot; + int sw_ack_slot; + int fw; + int count = 0; + unsigned long local_pnode; + + ack_APIC_irq(); + exit_idle(); + irq_enter(); + + time1 = get_cycles(); + + local_pnode = uv_blade_to_pnode(uv_numa_blade_id()); + + va_queue_first = __get_cpu_var(bau_control).va_queue_first; + va_queue_last = __get_cpu_var(bau_control).va_queue_last; + + msg = __get_cpu_var(bau_control).bau_msg_head; + while (msg->sw_ack_vector) { + count++; + fw = msg->sw_ack_vector; + msg_slot = msg - va_queue_first; + sw_ack_slot = ffs(fw) - 1; + + uv_bau_process_message(msg, msg_slot, sw_ack_slot); + + msg++; + if (msg > va_queue_last) + msg = va_queue_first; + __get_cpu_var(bau_control).bau_msg_head = msg; + } + if (!count) + __get_cpu_var(ptcstats).nomsg++; + else if (count > 1) + __get_cpu_var(ptcstats).multmsg++; + + time2 = get_cycles(); + __get_cpu_var(ptcstats).dflush += (time2 - time1); + + irq_exit(); + set_irq_regs(old_regs); +} + +static void uv_enable_timeouts(void) +{ + int i; + int blade; + int last_blade; + int pnode; + int cur_cpu = 0; + unsigned long apicid; + + last_blade = -1; + for_each_online_node(i) { + blade = uv_node_to_blade_id(i); + if (blade == last_blade) + continue; + last_blade = blade; + apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pnode = uv_blade_to_pnode(blade); + cur_cpu += uv_blade_nr_possible_cpus(i); + } +} + +static void *uv_ptc_seq_start(struct seq_file *file, loff_t *offset) +{ + if (*offset < num_possible_cpus()) + return offset; + return NULL; +} + +static void *uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) +{ + (*offset)++; + if (*offset < num_possible_cpus()) + return offset; + return NULL; +} + +static void uv_ptc_seq_stop(struct seq_file *file, void *data) +{ +} + +/* + * Display the statistics thru /proc + * data points to the cpu number + */ +static int uv_ptc_seq_show(struct seq_file *file, void *data) +{ + struct ptc_stats *stat; + int cpu; + + cpu = *(loff_t *)data; + + if (!cpu) { + seq_printf(file, + "# cpu requestor requestee one all sretry dretry ptc_i "); + seq_printf(file, + "sw_ack sflush dflush sok dnomsg dmult starget\n"); + } + if (cpu < num_possible_cpus() && cpu_online(cpu)) { + stat = &per_cpu(ptcstats, cpu); + seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld ", + cpu, stat->requestor, + stat->requestee, stat->onetlb, stat->alltlb, + stat->s_retry, stat->d_retry, stat->ptc_i); + seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", + uv_read_global_mmr64(uv_blade_to_pnode + (uv_cpu_to_blade_id(cpu)), + UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), + stat->sflush, stat->dflush, + stat->retriesok, stat->nomsg, + stat->multmsg, stat->ntargeted); + } + + return 0; +} + +/* + * 0: display meaning of the statistics + * >0: retry limit + */ +static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, + size_t count, loff_t *data) +{ + long newmode; + char optstr[64]; + + if (count == 0 || count > sizeof(optstr)) + return -EINVAL; + if (copy_from_user(optstr, user, count)) + return -EFAULT; + optstr[count - 1] = '\0'; + if (strict_strtoul(optstr, 10, &newmode) < 0) { + printk(KERN_DEBUG "%s is invalid\n", optstr); + return -EINVAL; + } + + if (newmode == 0) { + printk(KERN_DEBUG "# cpu: cpu number\n"); + printk(KERN_DEBUG + "requestor: times this cpu was the flush requestor\n"); + printk(KERN_DEBUG + "requestee: times this cpu was requested to flush its TLBs\n"); + printk(KERN_DEBUG + "one: times requested to flush a single address\n"); + printk(KERN_DEBUG + "all: times requested to flush all TLB's\n"); + printk(KERN_DEBUG + "sretry: number of retries of source-side timeouts\n"); + printk(KERN_DEBUG + "dretry: number of retries of destination-side timeouts\n"); + printk(KERN_DEBUG + "ptc_i: times UV fell through to IPI-style flushes\n"); + printk(KERN_DEBUG + "sw_ack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n"); + printk(KERN_DEBUG + "sflush_us: cycles spent in uv_flush_tlb_others()\n"); + printk(KERN_DEBUG + "dflush_us: cycles spent in handling flush requests\n"); + printk(KERN_DEBUG "sok: successes on retry\n"); + printk(KERN_DEBUG "dnomsg: interrupts with no message\n"); + printk(KERN_DEBUG + "dmult: interrupts with multiple messages\n"); + printk(KERN_DEBUG "starget: nodes targeted\n"); + } else { + uv_bau_retry_limit = newmode; + printk(KERN_DEBUG "timeout retry limit:%d\n", + uv_bau_retry_limit); + } + + return count; +} + +static const struct seq_operations uv_ptc_seq_ops = { + .start = uv_ptc_seq_start, + .next = uv_ptc_seq_next, + .stop = uv_ptc_seq_stop, + .show = uv_ptc_seq_show +}; + +static int uv_ptc_proc_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &uv_ptc_seq_ops); +} + +static const struct file_operations proc_uv_ptc_operations = { + .open = uv_ptc_proc_open, + .read = seq_read, + .write = uv_ptc_proc_write, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init uv_ptc_init(void) +{ + struct proc_dir_entry *proc_uv_ptc; + + if (!is_uv_system()) + return 0; + + if (!proc_mkdir("sgi_uv", NULL)) + return -EINVAL; + + proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL); + if (!proc_uv_ptc) { + printk(KERN_ERR "unable to create %s proc entry\n", + UV_PTC_BASENAME); + remove_proc_entry("sgi_uv", NULL); + return -EINVAL; + } + proc_uv_ptc->proc_fops = &proc_uv_ptc_operations; + return 0; +} + +/* + * begin the initialization of the per-blade control structures + */ +static struct bau_control * __init uv_table_bases_init(int blade, int node) +{ + int i; + int *ip; + struct bau_msg_status *msp; + struct bau_control *bau_tabp; + + bau_tabp = + kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node); + BUG_ON(!bau_tabp); + + bau_tabp->msg_statuses = + kmalloc_node(sizeof(struct bau_msg_status) * + DEST_Q_SIZE, GFP_KERNEL, node); + BUG_ON(!bau_tabp->msg_statuses); + + for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++) + bau_cpubits_clear(&msp->seen_by, (int) + uv_blade_nr_possible_cpus(blade)); + + bau_tabp->watching = + kmalloc_node(sizeof(int) * DEST_NUM_RESOURCES, GFP_KERNEL, node); + BUG_ON(!bau_tabp->watching); + + for (i = 0, ip = bau_tabp->watching; i < DEST_Q_SIZE; i++, ip++) + *ip = 0; + + uv_bau_table_bases[blade] = bau_tabp; + + return bau_tabp; +} + +/* + * finish the initialization of the per-blade control structures + */ +static void __init +uv_table_bases_finish(int blade, int node, int cur_cpu, + struct bau_control *bau_tablesp, + struct bau_desc *adp) +{ + struct bau_control *bcp; + int i; + + for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) { + bcp = (struct bau_control *)&per_cpu(bau_control, i); + + bcp->bau_msg_head = bau_tablesp->va_queue_first; + bcp->va_queue_first = bau_tablesp->va_queue_first; + bcp->va_queue_last = bau_tablesp->va_queue_last; + bcp->watching = bau_tablesp->watching; + bcp->msg_statuses = bau_tablesp->msg_statuses; + bcp->descriptor_base = adp; + } +} + +/* + * initialize the sending side's sending buffers + */ +static struct bau_desc * __init +uv_activation_descriptor_init(int node, int pnode) +{ + int i; + unsigned long pa; + unsigned long m; + unsigned long n; + unsigned long mmr_image; + struct bau_desc *adp; + struct bau_desc *ad2; + + adp = (struct bau_desc *) + kmalloc_node(16384, GFP_KERNEL, node); + BUG_ON(!adp); + + pa = __pa((unsigned long)adp); + n = pa >> uv_nshift; + m = pa & uv_mmask; + + mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE); + if (mmr_image) { + uv_write_global_mmr64(pnode, (unsigned long) + UVH_LB_BAU_SB_DESCRIPTOR_BASE, + (n << UV_DESC_BASE_PNODE_SHIFT | m)); + } + + for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { + memset(ad2, 0, sizeof(struct bau_desc)); + ad2->header.sw_ack_flag = 1; + ad2->header.base_dest_nodeid = + uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + ad2->header.command = UV_NET_ENDPOINT_INTD; + ad2->header.int_both = 1; + /* + * all others need to be set to zero: + * fairness chaining multilevel count replied_to + */ + } + return adp; +} + +/* + * initialize the destination side's receiving buffers + */ +static struct bau_payload_queue_entry * __init +uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) +{ + struct bau_payload_queue_entry *pqp; + char *cp; + + pqp = (struct bau_payload_queue_entry *) kmalloc_node( + (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry), + GFP_KERNEL, node); + BUG_ON(!pqp); + + cp = (char *)pqp + 31; + pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); + bau_tablesp->va_queue_first = pqp; + uv_write_global_mmr64(pnode, + UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, + ((unsigned long)pnode << + UV_PAYLOADQ_PNODE_SHIFT) | + uv_physnodeaddr(pqp)); + uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, + uv_physnodeaddr(pqp)); + bau_tablesp->va_queue_last = pqp + (DEST_Q_SIZE - 1); + uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, + (unsigned long) + uv_physnodeaddr(bau_tablesp->va_queue_last)); + memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE); + + return pqp; +} + +/* + * Initialization of each UV blade's structures + */ +static int __init uv_init_blade(int blade, int node, int cur_cpu) +{ + int pnode; + unsigned long pa; + unsigned long apicid; + struct bau_desc *adp; + struct bau_payload_queue_entry *pqp; + struct bau_control *bau_tablesp; + + bau_tablesp = uv_table_bases_init(blade, node); + pnode = uv_blade_to_pnode(blade); + adp = uv_activation_descriptor_init(node, pnode); + pqp = uv_payload_queue_init(node, pnode, bau_tablesp); + uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp); + /* + * the below initialization can't be in firmware because the + * messaging IRQ will be determined by the OS + */ + apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); + if ((pa & 0xff) != UV_BAU_MESSAGE) { + uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, + ((apicid << 32) | UV_BAU_MESSAGE)); + } + return 0; +} + +/* + * Initialization of BAU-related structures + */ +static int __init uv_bau_init(void) +{ + int blade; + int node; + int nblades; + int last_blade; + int cur_cpu = 0; + + if (!is_uv_system()) + return 0; + + uv_bau_retry_limit = 1; + uv_nshift = uv_hub_info->n_val; + uv_mmask = (1UL << uv_hub_info->n_val) - 1; + nblades = 0; + last_blade = -1; + for_each_online_node(node) { + blade = uv_node_to_blade_id(node); + if (blade == last_blade) + continue; + last_blade = blade; + nblades++; + } + uv_bau_table_bases = (struct bau_control **) + kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); + BUG_ON(!uv_bau_table_bases); + + last_blade = -1; + for_each_online_node(node) { + blade = uv_node_to_blade_id(node); + if (blade == last_blade) + continue; + last_blade = blade; + uv_init_blade(blade, node, cur_cpu); + cur_cpu += uv_blade_nr_possible_cpus(blade); + } + alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); + uv_enable_timeouts(); + + return 0; +} +__initcall(uv_bau_init); +__initcall(uv_ptc_init); diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c index ab6bf375a30..6bb7b8579e7 100644 --- a/arch/x86/kernel/tls.c +++ b/arch/x86/kernel/tls.c @@ -10,6 +10,7 @@ #include <asm/ldt.h> #include <asm/processor.h> #include <asm/proto.h> +#include <asm/syscalls.h> #include "tls.h" diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index abbf199adeb..1106fac6024 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,7 +2,7 @@ #include <asm/trampoline.h> -/* ready for x86_64, no harm for x86, since it will overwrite after alloc */ +/* ready for x86_64 and x86 */ unsigned char *trampoline_base = __va(TRAMPOLINE_BASE); /* diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index 08d752de4ee..0429c5de5ea 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -1,5 +1,6 @@ /* * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs * * Pentium III FXSR, SSE support * Gareth Hughes <gareth@valinux.com>, May 2000 @@ -57,11 +58,10 @@ #include <asm/nmi.h> #include <asm/smp.h> #include <asm/io.h> +#include <asm/traps.h> #include "mach_traps.h" -int panic_on_unrecovered_nmi; - DECLARE_BITMAP(used_vectors, NR_VECTORS); EXPORT_SYMBOL_GPL(used_vectors); @@ -78,39 +78,22 @@ char ignore_fpu_irq; gate_desc idt_table[256] __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, }; -asmlinkage void divide_error(void); -asmlinkage void debug(void); -asmlinkage void nmi(void); -asmlinkage void int3(void); -asmlinkage void overflow(void); -asmlinkage void bounds(void); -asmlinkage void invalid_op(void); -asmlinkage void device_not_available(void); -asmlinkage void coprocessor_segment_overrun(void); -asmlinkage void invalid_TSS(void); -asmlinkage void segment_not_present(void); -asmlinkage void stack_segment(void); -asmlinkage void general_protection(void); -asmlinkage void page_fault(void); -asmlinkage void coprocessor_error(void); -asmlinkage void simd_coprocessor_error(void); -asmlinkage void alignment_check(void); -asmlinkage void spurious_interrupt_bug(void); -asmlinkage void machine_check(void); - +int panic_on_unrecovered_nmi; int kstack_depth_to_print = 24; static unsigned int code_bytes = 64; +static int ignore_nmis; +static int die_counter; void printk_address(unsigned long address, int reliable) { #ifdef CONFIG_KALLSYMS - char namebuf[KSYM_NAME_LEN]; unsigned long offset = 0; unsigned long symsize; const char *symname; - char reliab[4] = ""; - char *delim = ":"; char *modname; + char *delim = ":"; + char namebuf[KSYM_NAME_LEN]; + char reliab[4] = ""; symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf); @@ -130,22 +113,23 @@ void printk_address(unsigned long address, int reliable) #endif } -static inline int valid_stack_ptr(struct thread_info *tinfo, void *p, unsigned size) +static inline int valid_stack_ptr(struct thread_info *tinfo, + void *p, unsigned int size) { - return p > (void *)tinfo && - p <= (void *)tinfo + THREAD_SIZE - size; + void *t = tinfo; + return p > t && p <= t + THREAD_SIZE - size; } /* The form of the top of the frame on the stack */ struct stack_frame { - struct stack_frame *next_frame; - unsigned long return_address; + struct stack_frame *next_frame; + unsigned long return_address; }; static inline unsigned long print_context_stack(struct thread_info *tinfo, - unsigned long *stack, unsigned long bp, - const struct stacktrace_ops *ops, void *data) + unsigned long *stack, unsigned long bp, + const struct stacktrace_ops *ops, void *data) { struct stack_frame *frame = (struct stack_frame *)bp; @@ -167,8 +151,6 @@ print_context_stack(struct thread_info *tinfo, return bp; } -#define MSG(msg) ops->warning(data, msg) - void dump_trace(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, unsigned long bp, const struct stacktrace_ops *ops, void *data) @@ -178,7 +160,6 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, if (!stack) { unsigned long dummy; - stack = &dummy; if (task != current) stack = (unsigned long *)task->thread.sp; @@ -196,7 +177,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, } #endif - while (1) { + for (;;) { struct thread_info *context; context = (struct thread_info *) @@ -248,15 +229,15 @@ static void print_trace_address(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops print_trace_ops = { - .warning = print_trace_warning, - .warning_symbol = print_trace_warning_symbol, - .stack = print_trace_stack, - .address = print_trace_address, + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, }; static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, unsigned long bp, char *log_lvl) + unsigned long *stack, unsigned long bp, char *log_lvl) { dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); printk("%s =======================\n", log_lvl); @@ -351,15 +332,14 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Code: "); ip = (u8 *)regs->ip - code_prologue; - if (ip < (u8 *)PAGE_OFFSET || - probe_kernel_address(ip, c)) { + if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { /* try starting at EIP */ ip = (u8 *)regs->ip; code_len = code_len - code_prologue + 1; } for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || - probe_kernel_address(ip, c)) { + probe_kernel_address(ip, c)) { printk(" Bad EIP value."); break; } @@ -384,7 +364,53 @@ int is_valid_bugaddr(unsigned long ip) return ud2 == 0x0b0f; } -static int die_counter; +static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED; +static int die_owner = -1; +static unsigned int die_nest_count; + +unsigned __kprobes long oops_begin(void) +{ + unsigned long flags; + + oops_enter(); + + if (die_owner != raw_smp_processor_id()) { + console_verbose(); + raw_local_irq_save(flags); + __raw_spin_lock(&die_lock); + die_owner = smp_processor_id(); + die_nest_count = 0; + bust_spinlocks(1); + } else { + raw_local_irq_save(flags); + } + die_nest_count++; + return flags; +} + +void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr) +{ + bust_spinlocks(0); + die_owner = -1; + add_taint(TAINT_DIE); + __raw_spin_unlock(&die_lock); + raw_local_irq_restore(flags); + + if (!regs) + return; + + if (kexec_should_crash(current)) + crash_kexec(regs); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) + panic("Fatal exception"); + + oops_exit(); + do_exit(signr); +} int __kprobes __die(const char *str, struct pt_regs *regs, long err) { @@ -402,26 +428,22 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err) printk("DEBUG_PAGEALLOC"); #endif printk("\n"); - if (notify_die(DIE_OOPS, str, regs, err, - current->thread.trap_no, SIGSEGV) != NOTIFY_STOP) { - - show_registers(regs); - /* Executive summary in case the oops scrolled away */ - sp = (unsigned long) (®s->sp); - savesegment(ss, ss); - if (user_mode(regs)) { - sp = regs->sp; - ss = regs->ss & 0xffff; - } - printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip); - print_symbol("%s", regs->ip); - printk(" SS:ESP %04x:%08lx\n", ss, sp); + current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) + return 1; - return 0; + show_registers(regs); + /* Executive summary in case the oops scrolled away */ + sp = (unsigned long) (®s->sp); + savesegment(ss, ss); + if (user_mode(regs)) { + sp = regs->sp; + ss = regs->ss & 0xffff; } - - return 1; + printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip); + print_symbol("%s", regs->ip); + printk(" SS:ESP %04x:%08lx\n", ss, sp); + return 0; } /* @@ -430,31 +452,9 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err) */ void die(const char *str, struct pt_regs *regs, long err) { - static struct { - raw_spinlock_t lock; - u32 lock_owner; - int lock_owner_depth; - } die = { - .lock = __RAW_SPIN_LOCK_UNLOCKED, - .lock_owner = -1, - .lock_owner_depth = 0 - }; - unsigned long flags; - - oops_enter(); - - if (die.lock_owner != raw_smp_processor_id()) { - console_verbose(); - raw_local_irq_save(flags); - __raw_spin_lock(&die.lock); - die.lock_owner = smp_processor_id(); - die.lock_owner_depth = 0; - bust_spinlocks(1); - } else { - raw_local_irq_save(flags); - } + unsigned long flags = oops_begin(); - if (++die.lock_owner_depth < 3) { + if (die_nest_count < 3) { report_bug(regs->ip, regs); if (__die(str, regs, err)) @@ -463,26 +463,7 @@ void die(const char *str, struct pt_regs *regs, long err) printk(KERN_EMERG "Recursive die() failure, output suppressed\n"); } - bust_spinlocks(0); - die.lock_owner = -1; - add_taint(TAINT_DIE); - __raw_spin_unlock(&die.lock); - raw_local_irq_restore(flags); - - if (!regs) - return; - - if (kexec_should_crash(current)) - crash_kexec(regs); - - if (in_interrupt()) - panic("Fatal exception in interrupt"); - - if (panic_on_oops) - panic("Fatal exception"); - - oops_exit(); - do_exit(SIGSEGV); + oops_end(flags, regs, SIGSEGV); } static inline void @@ -546,7 +527,7 @@ void do_##name(struct pt_regs *regs, long error_code) \ { \ trace_hardirqs_fixup(); \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ + == NOTIFY_STOP) \ return; \ do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \ } @@ -562,7 +543,7 @@ void do_##name(struct pt_regs *regs, long error_code) \ info.si_code = sicode; \ info.si_addr = (void __user *)siaddr; \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ + == NOTIFY_STOP) \ return; \ do_trap(trapnr, signr, str, 0, regs, error_code, &info); \ } @@ -571,7 +552,7 @@ void do_##name(struct pt_regs *regs, long error_code) \ void do_##name(struct pt_regs *regs, long error_code) \ { \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ + == NOTIFY_STOP) \ return; \ do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \ } @@ -586,27 +567,29 @@ void do_##name(struct pt_regs *regs, long error_code) \ info.si_addr = (void __user *)siaddr; \ trace_hardirqs_fixup(); \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ + == NOTIFY_STOP) \ return; \ do_trap(trapnr, signr, str, 1, regs, error_code, &info); \ } -DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) +DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) #ifndef CONFIG_KPROBES DO_VM86_ERROR(3, SIGTRAP, "int3", int3) #endif DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow) DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds) -DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0) -DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) +DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0) +DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) -DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) -DO_ERROR(12, SIGBUS, "stack segment", stack_segment) +DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) +DO_ERROR(12, SIGBUS, "stack segment", stack_segment) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0) DO_ERROR_INFO(32, SIGILL, "iret exception", iret_error, ILL_BADSTK, 0, 1) -void __kprobes do_general_protection(struct pt_regs *regs, long error_code) +void __kprobes +do_general_protection(struct pt_regs *regs, long error_code) { + struct task_struct *tsk; struct thread_struct *thread; struct tss_struct *tss; int cpu; @@ -647,23 +630,24 @@ void __kprobes do_general_protection(struct pt_regs *regs, long error_code) if (regs->flags & X86_VM_MASK) goto gp_in_vm86; + tsk = current; if (!user_mode(regs)) goto gp_in_kernel; - current->thread.error_code = error_code; - current->thread.trap_no = 13; + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; - if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) && - printk_ratelimit()) { + if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && + printk_ratelimit()) { printk(KERN_INFO - "%s[%d] general protection ip:%lx sp:%lx error:%lx", - current->comm, task_pid_nr(current), - regs->ip, regs->sp, error_code); + "%s[%d] general protection ip:%lx sp:%lx error:%lx", + tsk->comm, task_pid_nr(tsk), + regs->ip, regs->sp, error_code); print_vma_addr(" in ", regs->ip); printk("\n"); } - force_sig(SIGSEGV, current); + force_sig(SIGSEGV, tsk); return; gp_in_vm86: @@ -672,14 +656,15 @@ gp_in_vm86: return; gp_in_kernel: - if (!fixup_exception(regs)) { - current->thread.error_code = error_code; - current->thread.trap_no = 13; - if (notify_die(DIE_GPF, "general protection fault", regs, + if (fixup_exception(regs)) + return; + + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; + if (notify_die(DIE_GPF, "general protection fault", regs, error_code, 13, SIGSEGV) == NOTIFY_STOP) - return; - die("general protection fault", regs, error_code); - } + return; + die("general protection fault", regs, error_code); } static notrace __kprobes void @@ -756,9 +741,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs) static DEFINE_SPINLOCK(nmi_print_lock); -void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) +void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) { - if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; spin_lock(&nmi_print_lock); @@ -767,10 +752,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) * to get a message out: */ bust_spinlocks(1); - printk(KERN_EMERG "%s", msg); + printk(KERN_EMERG "%s", str); printk(" on CPU%d, ip %08lx, registers:\n", smp_processor_id(), regs->ip); show_registers(regs); + if (do_panic) + panic("Non maskable interrupt"); console_silent(); spin_unlock(&nmi_print_lock); bust_spinlocks(0); @@ -790,14 +777,17 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) static notrace __kprobes void default_do_nmi(struct pt_regs *regs) { unsigned char reason = 0; + int cpu; - /* Only the BSP gets external NMIs from the system: */ - if (!smp_processor_id()) + cpu = smp_processor_id(); + + /* Only the BSP gets external NMIs from the system. */ + if (!cpu) reason = get_nmi_reason(); if (!(reason & 0xc0)) { if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) + == NOTIFY_STOP) return; #ifdef CONFIG_X86_LOCAL_APIC /* @@ -806,7 +796,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) */ if (nmi_watchdog_tick(regs, reason)) return; - if (!do_nmi_callback(regs, smp_processor_id())) + if (!do_nmi_callback(regs, cpu)) unknown_nmi_error(reason, regs); #else unknown_nmi_error(reason, regs); @@ -816,6 +806,8 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) } if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; + + /* AK: following checks seem to be broken on modern chipsets. FIXME */ if (reason & 0x80) mem_parity_error(reason, regs); if (reason & 0x40) @@ -827,8 +819,6 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) reassert_nmi(); } -static int ignore_nmis; - notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code) { int cpu; @@ -901,6 +891,7 @@ void __kprobes do_debug(struct pt_regs *regs, long error_code) { struct task_struct *tsk = current; unsigned int condition; + int si_code; trace_hardirqs_fixup(); @@ -913,7 +904,7 @@ void __kprobes do_debug(struct pt_regs *regs, long error_code) tsk->thread.debugctlmsr = 0; if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, - SIGTRAP) == NOTIFY_STOP) + SIGTRAP) == NOTIFY_STOP) return; /* It's safe to allow irq's after DR6 has been saved */ if (regs->flags & X86_EFLAGS_IF) @@ -945,8 +936,9 @@ void __kprobes do_debug(struct pt_regs *regs, long error_code) goto clear_TF_reenable; } + si_code = get_si_code((unsigned long)condition); /* Ok, finally something we can handle */ - send_sigtrap(tsk, regs, error_code); + send_sigtrap(tsk, regs, error_code, si_code); /* * Disable additional traps. They'll be re-enabled when @@ -974,9 +966,8 @@ clear_TF_reenable: void math_error(void __user *ip) { struct task_struct *task; - unsigned short cwd; - unsigned short swd; siginfo_t info; + unsigned short cwd, swd; /* * Save the info for the exception handler and clear the error. @@ -995,7 +986,7 @@ void math_error(void __user *ip) * C1 reg you need in case of a stack fault, 0x040 is the stack * fault bit. We should only be taking one exception at a time, * so if this combination doesn't produce any single exception, - * then we have a bad program that isn't syncronizing its FPU usage + * then we have a bad program that isn't synchronizing its FPU usage * and it will suffer the consequences since we won't be able to * fully reproduce the context of the exception */ @@ -1004,7 +995,7 @@ void math_error(void __user *ip) switch (swd & ~cwd & 0x3f) { case 0x000: /* No unmasked exception */ return; - default: /* Multiple exceptions */ + default: /* Multiple exceptions */ break; case 0x001: /* Invalid Op */ /* @@ -1040,8 +1031,8 @@ void do_coprocessor_error(struct pt_regs *regs, long error_code) static void simd_math_error(void __user *ip) { struct task_struct *task; - unsigned short mxcsr; siginfo_t info; + unsigned short mxcsr; /* * Save the info for the exception handler and clear the error. @@ -1117,7 +1108,7 @@ void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code) unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp) { - struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt; + struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id()); unsigned long base = (kesp - uesp) & -THREAD_SIZE; unsigned long new_kesp = kesp - base; unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT; @@ -1196,19 +1187,16 @@ void __init trap_init(void) early_iounmap(p, 4); #endif -#ifdef CONFIG_X86_LOCAL_APIC - init_apic_mappings(); -#endif - set_trap_gate(0, ÷_error); - set_intr_gate(1, &debug); - set_intr_gate(2, &nmi); - set_system_intr_gate(3, &int3); /* int3/4 can be called from all */ - set_system_gate(4, &overflow); - set_trap_gate(5, &bounds); - set_trap_gate(6, &invalid_op); - set_trap_gate(7, &device_not_available); - set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS); - set_trap_gate(9, &coprocessor_segment_overrun); + set_trap_gate(0, ÷_error); + set_intr_gate(1, &debug); + set_intr_gate(2, &nmi); + set_system_intr_gate(3, &int3); /* int3 can be called from all */ + set_system_gate(4, &overflow); /* int4 can be called from all */ + set_trap_gate(5, &bounds); + set_trap_gate(6, &invalid_op); + set_trap_gate(7, &device_not_available); + set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS); + set_trap_gate(9, &coprocessor_segment_overrun); set_trap_gate(10, &invalid_TSS); set_trap_gate(11, &segment_not_present); set_trap_gate(12, &stack_segment); @@ -1242,7 +1230,6 @@ void __init trap_init(void) set_bit(SYSCALL_VECTOR, used_vectors); - init_thread_xstate(); /* * Should be a barrier for any external CPU state: */ diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c..9c0ac0cab01 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -10,73 +10,55 @@ * 'Traps.c' handles hardware traps and faults after we have saved some * state in 'entry.S'. */ -#include <linux/sched.h> +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/kallsyms.h> +#include <linux/spinlock.h> +#include <linux/kprobes.h> +#include <linux/uaccess.h> +#include <linux/utsname.h> +#include <linux/kdebug.h> #include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ptrace.h> #include <linux/string.h> +#include <linux/unwind.h> +#include <linux/delay.h> #include <linux/errno.h> -#include <linux/ptrace.h> +#include <linux/kexec.h> +#include <linux/sched.h> #include <linux/timer.h> -#include <linux/mm.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/kallsyms.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/nmi.h> -#include <linux/kprobes.h> -#include <linux/kexec.h> -#include <linux/unwind.h> -#include <linux/uaccess.h> #include <linux/bug.h> -#include <linux/kdebug.h> -#include <linux/utsname.h> - -#include <mach_traps.h> +#include <linux/nmi.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/io.h> #if defined(CONFIG_EDAC) #include <linux/edac.h> #endif -#include <asm/system.h> -#include <asm/io.h> -#include <asm/atomic.h> +#include <asm/stacktrace.h> +#include <asm/processor.h> #include <asm/debugreg.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/unwind.h> #include <asm/desc.h> #include <asm/i387.h> -#include <asm/processor.h> -#include <asm/unwind.h> -#include <asm/smp.h> #include <asm/pgalloc.h> -#include <asm/pda.h> #include <asm/proto.h> -#include <asm/nmi.h> -#include <asm/stacktrace.h> +#include <asm/pda.h> +#include <asm/traps.h> -asmlinkage void divide_error(void); -asmlinkage void debug(void); -asmlinkage void nmi(void); -asmlinkage void int3(void); -asmlinkage void overflow(void); -asmlinkage void bounds(void); -asmlinkage void invalid_op(void); -asmlinkage void device_not_available(void); -asmlinkage void double_fault(void); -asmlinkage void coprocessor_segment_overrun(void); -asmlinkage void invalid_TSS(void); -asmlinkage void segment_not_present(void); -asmlinkage void stack_segment(void); -asmlinkage void general_protection(void); -asmlinkage void page_fault(void); -asmlinkage void coprocessor_error(void); -asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); -asmlinkage void alignment_check(void); -asmlinkage void machine_check(void); -asmlinkage void spurious_interrupt_bug(void); +#include <mach_traps.h> +int panic_on_unrecovered_nmi; +int kstack_depth_to_print = 12; static unsigned int code_bytes = 64; +static int ignore_nmis; +static int die_counter; static inline void conditional_sti(struct pt_regs *regs) { @@ -100,34 +82,10 @@ static inline void preempt_conditional_cli(struct pt_regs *regs) dec_preempt_count(); } -int kstack_depth_to_print = 12; - void printk_address(unsigned long address, int reliable) { -#ifdef CONFIG_KALLSYMS - unsigned long offset = 0, symsize; - const char *symname; - char *modname; - char *delim = ":"; - char namebuf[KSYM_NAME_LEN]; - char reliab[4] = ""; - - symname = kallsyms_lookup(address, &symsize, &offset, - &modname, namebuf); - if (!symname) { - printk(" [<%016lx>]\n", address); - return; - } - if (!reliable) - strcpy(reliab, "? "); - - if (!modname) - modname = delim = ""; - printk(" [<%016lx>] %s%s%s%s%s+0x%lx/0x%lx\n", - address, reliab, delim, modname, delim, symname, offset, symsize); -#else - printk(" [<%016lx>]\n", address); -#endif + printk(" [<%016lx>] %s%pS\n", + address, reliable ? "" : "? ", (void *) address); } static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, @@ -140,7 +98,8 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, [STACKFAULT_STACK - 1] = "#SS", [MCE_STACK - 1] = "#MC", #if DEBUG_STKSZ > EXCEPTION_STKSZ - [N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" + [N_EXCEPTION_STACKS ... + N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" #endif }; unsigned k; @@ -204,10 +163,8 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, return NULL; } -#define MSG(txt) ops->warning(data, txt) - /* - * x86-64 can have up to three kernel stacks: + * x86-64 can have up to three kernel stacks: * process stack * interrupt stack * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack @@ -232,11 +189,11 @@ struct stack_frame { unsigned long return_address; }; - -static inline unsigned long print_context_stack(struct thread_info *tinfo, - unsigned long *stack, unsigned long bp, - const struct stacktrace_ops *ops, void *data, - unsigned long *end) +static inline unsigned long +print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long bp, + const struct stacktrace_ops *ops, void *data, + unsigned long *end) { struct stack_frame *frame = (struct stack_frame *)bp; @@ -258,45 +215,43 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo, return bp; } -void dump_trace(struct task_struct *tsk, struct pt_regs *regs, +void dump_trace(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, unsigned long bp, const struct stacktrace_ops *ops, void *data) { const unsigned cpu = get_cpu(); - unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr; + unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr; unsigned used = 0; struct thread_info *tinfo; - if (!tsk) - tsk = current; - tinfo = task_thread_info(tsk); + if (!task) + task = current; if (!stack) { unsigned long dummy; stack = &dummy; - if (tsk && tsk != current) - stack = (unsigned long *)tsk->thread.sp; + if (task && task != current) + stack = (unsigned long *)task->thread.sp; } #ifdef CONFIG_FRAME_POINTER if (!bp) { - if (tsk == current) { + if (task == current) { /* Grab bp right from our regs */ - asm("movq %%rbp, %0" : "=r" (bp):); + asm("movq %%rbp, %0" : "=r" (bp) : ); } else { /* bp is the last reg pushed by switch_to */ - bp = *(unsigned long *) tsk->thread.sp; + bp = *(unsigned long *) task->thread.sp; } } #endif - - /* * Print function call entries in all stacks, starting at the * current stack address. If the stacks consist of nested * exceptions */ + tinfo = task_thread_info(task); for (;;) { char *id; unsigned long *estack_end; @@ -381,37 +336,46 @@ static const struct stacktrace_ops print_trace_ops = { .address = print_trace_address, }; -void -show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack, - unsigned long bp) +static void +show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, unsigned long bp, char *log_lvl) { - printk("\nCall Trace:\n"); - dump_trace(tsk, regs, stack, bp, &print_trace_ops, NULL); - printk("\n"); + printk("Call Trace:\n"); + dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); +} + +void show_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, unsigned long bp) +{ + show_trace_log_lvl(task, regs, stack, bp, ""); } static void -_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp, - unsigned long bp) +show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *sp, unsigned long bp, char *log_lvl) { unsigned long *stack; int i; const int cpu = smp_processor_id(); - unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr); - unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); + unsigned long *irqstack_end = + (unsigned long *) (cpu_pda(cpu)->irqstackptr); + unsigned long *irqstack = + (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); - // debugging aid: "show_stack(NULL, NULL);" prints the - // back trace for this cpu. + /* + * debugging aid: "show_stack(NULL, NULL);" prints the + * back trace for this cpu. + */ if (sp == NULL) { - if (tsk) - sp = (unsigned long *)tsk->thread.sp; + if (task) + sp = (unsigned long *)task->thread.sp; else sp = (unsigned long *)&sp; } stack = sp; - for(i=0; i < kstack_depth_to_print; i++) { + for (i = 0; i < kstack_depth_to_print; i++) { if (stack >= irqstack && stack <= irqstack_end) { if (stack == irqstack_end) { stack = (unsigned long *) (irqstack_end[-1]); @@ -426,12 +390,13 @@ _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp, printk(" %016lx", *stack++); touch_nmi_watchdog(); } - show_trace(tsk, regs, sp, bp); + printk("\n"); + show_trace_log_lvl(task, regs, sp, bp, log_lvl); } -void show_stack(struct task_struct *tsk, unsigned long * sp) +void show_stack(struct task_struct *task, unsigned long *sp) { - _show_stack(tsk, NULL, sp, 0); + show_stack_log_lvl(task, NULL, sp, 0, ""); } /* @@ -439,12 +404,12 @@ void show_stack(struct task_struct *tsk, unsigned long * sp) */ void dump_stack(void) { - unsigned long dummy; unsigned long bp = 0; + unsigned long stack; #ifdef CONFIG_FRAME_POINTER if (!bp) - asm("movq %%rbp, %0" : "=r" (bp):); + asm("movq %%rbp, %0" : "=r" (bp) : ); #endif printk("Pid: %d, comm: %.20s %s %s %.*s\n", @@ -452,9 +417,8 @@ void dump_stack(void) init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); - show_trace(NULL, NULL, &dummy, bp); + show_trace(NULL, NULL, &stack, bp); } - EXPORT_SYMBOL(dump_stack); void show_registers(struct pt_regs *regs) @@ -463,12 +427,8 @@ void show_registers(struct pt_regs *regs) unsigned long sp; const int cpu = smp_processor_id(); struct task_struct *cur = cpu_pda(cpu)->pcurrent; - u8 *ip; - unsigned int code_prologue = code_bytes * 43 / 64; - unsigned int code_len = code_bytes; sp = regs->sp; - ip = (u8 *) regs->ip - code_prologue; printk("CPU %d ", cpu); __show_regs(regs); printk("Process %s (pid: %d, threadinfo %p, task %p)\n", @@ -479,15 +439,21 @@ void show_registers(struct pt_regs *regs) * time of the fault.. */ if (!user_mode(regs)) { + unsigned int code_prologue = code_bytes * 43 / 64; + unsigned int code_len = code_bytes; unsigned char c; + u8 *ip; + printk("Stack: "); - _show_stack(NULL, regs, (unsigned long *)sp, regs->bp); - printk("\n"); + show_stack_log_lvl(NULL, regs, (unsigned long *)sp, + regs->bp, ""); printk(KERN_EMERG "Code: "); + + ip = (u8 *)regs->ip - code_prologue; if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { /* try starting at RIP */ - ip = (u8 *) regs->ip; + ip = (u8 *)regs->ip; code_len = code_len - code_prologue + 1; } for (i = 0; i < code_len; i++, ip++) { @@ -503,7 +469,7 @@ void show_registers(struct pt_regs *regs) } } printk("\n"); -} +} int is_valid_bugaddr(unsigned long ip) { @@ -530,7 +496,7 @@ unsigned __kprobes long oops_begin(void) raw_local_irq_save(flags); cpu = smp_processor_id(); if (!__raw_spin_trylock(&die_lock)) { - if (cpu == die_owner) + if (cpu == die_owner) /* nested oops. should stop eventually */; else __raw_spin_lock(&die_lock); @@ -543,7 +509,7 @@ unsigned __kprobes long oops_begin(void) } void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr) -{ +{ die_owner = -1; bust_spinlocks(0); die_nest_count--; @@ -561,10 +527,9 @@ void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr) do_exit(signr); } -int __kprobes __die(const char * str, struct pt_regs * regs, long err) +int __kprobes __die(const char *str, struct pt_regs *regs, long err) { - static int die_counter; - printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter); + printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff, ++die_counter); #ifdef CONFIG_PREEMPT printk("PREEMPT "); #endif @@ -575,8 +540,10 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err) printk("DEBUG_PAGEALLOC"); #endif printk("\n"); - if (notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) + if (notify_die(DIE_OOPS, str, regs, err, + current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) return 1; + show_registers(regs); add_taint(TAINT_DIE); /* Executive summary in case the oops scrolled away */ @@ -588,7 +555,7 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err) return 0; } -void die(const char * str, struct pt_regs * regs, long err) +void die(const char *str, struct pt_regs *regs, long err) { unsigned long flags = oops_begin(); @@ -605,8 +572,7 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) { unsigned long flags; - if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == - NOTIFY_STOP) + if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; flags = oops_begin(); @@ -614,7 +580,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) * We are in trouble anyway, lets at least try * to get a message out. */ - printk(str, smp_processor_id()); + printk(KERN_EMERG "%s", str); + printk(" on CPU%d, ip %08lx, registers:\n", + smp_processor_id(), regs->ip); show_registers(regs); if (kexec_should_crash(current)) crash_kexec(regs); @@ -626,44 +594,44 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) do_exit(SIGBUS); } -static void __kprobes do_trap(int trapnr, int signr, char *str, - struct pt_regs * regs, long error_code, - siginfo_t *info) +static void __kprobes +do_trap(int trapnr, int signr, char *str, struct pt_regs *regs, + long error_code, siginfo_t *info) { struct task_struct *tsk = current; - if (user_mode(regs)) { - /* - * We want error_code and trap_no set for userspace - * faults and kernelspace faults which result in - * die(), but not kernelspace faults which are fixed - * up. die() gives the process no chance to handle - * the signal and notice the kernel fault information, - * so that won't result in polluting the information - * about previously queued, but not yet delivered, - * faults. See also do_general_protection below. - */ - tsk->thread.error_code = error_code; - tsk->thread.trap_no = trapnr; - - if (show_unhandled_signals && unhandled_signal(tsk, signr) && - printk_ratelimit()) { - printk(KERN_INFO - "%s[%d] trap %s ip:%lx sp:%lx error:%lx", - tsk->comm, tsk->pid, str, - regs->ip, regs->sp, error_code); - print_vma_addr(" in ", regs->ip); - printk("\n"); - } + if (!user_mode(regs)) + goto kernel_trap; - if (info) - force_sig_info(signr, info, tsk); - else - force_sig(signr, tsk); - return; + /* + * We want error_code and trap_no set for userspace faults and + * kernelspace faults which result in die(), but not + * kernelspace faults which are fixed up. die() gives the + * process no chance to handle the signal and notice the + * kernel fault information, so that won't result in polluting + * the information about previously queued, but not yet + * delivered, faults. See also do_general_protection below. + */ + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + + if (show_unhandled_signals && unhandled_signal(tsk, signr) && + printk_ratelimit()) { + printk(KERN_INFO + "%s[%d] trap %s ip:%lx sp:%lx error:%lx", + tsk->comm, tsk->pid, str, + regs->ip, regs->sp, error_code); + print_vma_addr(" in ", regs->ip); + printk("\n"); } + if (info) + force_sig_info(signr, info, tsk); + else + force_sig(signr, tsk); + return; +kernel_trap: if (!fixup_exception(regs)) { tsk->thread.error_code = error_code; tsk->thread.trap_no = trapnr; @@ -673,41 +641,39 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, } #define DO_ERROR(trapnr, signr, str, name) \ -asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ -{ \ - if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ - return; \ +asmlinkage void do_##name(struct pt_regs *regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ conditional_sti(regs); \ - do_trap(trapnr, signr, str, regs, error_code, NULL); \ + do_trap(trapnr, signr, str, regs, error_code, NULL); \ } -#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ -asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ -{ \ - siginfo_t info; \ - info.si_signo = signr; \ - info.si_errno = 0; \ - info.si_code = sicode; \ - info.si_addr = (void __user *)siaddr; \ - trace_hardirqs_fixup(); \ - if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ - return; \ +#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ +asmlinkage void do_##name(struct pt_regs *regs, long error_code) \ +{ \ + siginfo_t info; \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + trace_hardirqs_fixup(); \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ conditional_sti(regs); \ - do_trap(trapnr, signr, str, regs, error_code, &info); \ + do_trap(trapnr, signr, str, regs, error_code, &info); \ } -DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) -DO_ERROR( 4, SIGSEGV, "overflow", overflow) -DO_ERROR( 5, SIGSEGV, "bounds", bounds) -DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) -DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) +DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) +DO_ERROR(4, SIGSEGV, "overflow", overflow) +DO_ERROR(5, SIGSEGV, "bounds", bounds) +DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) +DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) -DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) +DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) @@ -720,7 +686,7 @@ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) preempt_conditional_cli(regs); } -asmlinkage void do_double_fault(struct pt_regs * regs, long error_code) +asmlinkage void do_double_fault(struct pt_regs *regs, long error_code) { static const char str[] = "double fault"; struct task_struct *tsk = current; @@ -737,31 +703,34 @@ asmlinkage void do_double_fault(struct pt_regs * regs, long error_code) die(str, regs, error_code); } -asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, - long error_code) +asmlinkage void __kprobes +do_general_protection(struct pt_regs *regs, long error_code) { - struct task_struct *tsk = current; + struct task_struct *tsk; conditional_sti(regs); - if (user_mode(regs)) { - tsk->thread.error_code = error_code; - tsk->thread.trap_no = 13; - - if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && - printk_ratelimit()) { - printk(KERN_INFO - "%s[%d] general protection ip:%lx sp:%lx error:%lx", - tsk->comm, tsk->pid, - regs->ip, regs->sp, error_code); - print_vma_addr(" in ", regs->ip); - printk("\n"); - } + tsk = current; + if (!user_mode(regs)) + goto gp_in_kernel; - force_sig(SIGSEGV, tsk); - return; - } + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; + + if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && + printk_ratelimit()) { + printk(KERN_INFO + "%s[%d] general protection ip:%lx sp:%lx error:%lx", + tsk->comm, tsk->pid, + regs->ip, regs->sp, error_code); + print_vma_addr(" in ", regs->ip); + printk("\n"); + } + + force_sig(SIGSEGV, tsk); + return; +gp_in_kernel: if (fixup_exception(regs)) return; @@ -774,14 +743,14 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, } static notrace __kprobes void -mem_parity_error(unsigned char reason, struct pt_regs * regs) +mem_parity_error(unsigned char reason, struct pt_regs *regs) { printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", reason); printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n"); #if defined(CONFIG_EDAC) - if(edac_handler_set()) { + if (edac_handler_set()) { edac_atomic_assert_error(); return; } @@ -798,7 +767,7 @@ mem_parity_error(unsigned char reason, struct pt_regs * regs) } static notrace __kprobes void -io_check_error(unsigned char reason, struct pt_regs * regs) +io_check_error(unsigned char reason, struct pt_regs *regs) { printk("NMI: IOCK error (debug interrupt?)\n"); show_registers(regs); @@ -812,9 +781,10 @@ io_check_error(unsigned char reason, struct pt_regs * regs) } static notrace __kprobes void -unknown_nmi_error(unsigned char reason, struct pt_regs * regs) +unknown_nmi_error(unsigned char reason, struct pt_regs *regs) { - if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == + NOTIFY_STOP) return; printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", reason); @@ -828,14 +798,14 @@ unknown_nmi_error(unsigned char reason, struct pt_regs * regs) /* Runs on IST stack. This code must keep interrupts off all the time. Nested NMIs are prevented by the CPU. */ -asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) +asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) { unsigned char reason = 0; int cpu; cpu = smp_processor_id(); - /* Only the BSP gets external NMIs from the system. */ + /* Only the BSP gets external NMIs from the system. */ if (!cpu) reason = get_nmi_reason(); @@ -847,32 +817,57 @@ asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) * Ok, so this is none of the documented NMI sources, * so it must be the NMI watchdog. */ - if (nmi_watchdog_tick(regs,reason)) + if (nmi_watchdog_tick(regs, reason)) return; - if (!do_nmi_callback(regs,cpu)) + if (!do_nmi_callback(regs, cpu)) unknown_nmi_error(reason, regs); return; } if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) - return; + return; /* AK: following checks seem to be broken on modern chipsets. FIXME */ - if (reason & 0x80) mem_parity_error(reason, regs); if (reason & 0x40) io_check_error(reason, regs); } +asmlinkage notrace __kprobes void +do_nmi(struct pt_regs *regs, long error_code) +{ + nmi_enter(); + + add_pda(__nmi_count, 1); + + if (!ignore_nmis) + default_do_nmi(regs); + + nmi_exit(); +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + /* runs on IST stack. */ -asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) +asmlinkage void __kprobes do_int3(struct pt_regs *regs, long error_code) { trace_hardirqs_fixup(); - if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) { + if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) + == NOTIFY_STOP) return; - } + preempt_conditional_sti(regs); do_trap(3, SIGTRAP, "int3", regs, error_code, NULL); preempt_conditional_cli(regs); @@ -891,7 +886,7 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) else if (user_mode(eregs)) regs = task_pt_regs(current); /* Exception from kernel and interrupts are enabled. Move to - kernel process stack. */ + kernel process stack. */ else if (eregs->flags & X86_EFLAGS_IF) regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs)); if (eregs != regs) @@ -900,11 +895,11 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) } /* runs on IST stack. */ -asmlinkage void __kprobes do_debug(struct pt_regs * regs, +asmlinkage void __kprobes do_debug(struct pt_regs *regs, unsigned long error_code) { - unsigned long condition; struct task_struct *tsk = current; + unsigned long condition; siginfo_t info; trace_hardirqs_fixup(); @@ -925,21 +920,19 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs, /* Mask out spurious debug traps due to lazy DR7 setting */ if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { - if (!tsk->thread.debugreg7) { + if (!tsk->thread.debugreg7) goto clear_dr7; - } } tsk->thread.debugreg6 = condition; - /* * Single-stepping through TF: make sure we ignore any events in * kernel space (but re-enable TF when returning to user mode). */ if (condition & DR_STEP) { - if (!user_mode(regs)) - goto clear_TF_reenable; + if (!user_mode(regs)) + goto clear_TF_reenable; } /* Ok, finally something we can handle */ @@ -947,12 +940,12 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs, tsk->thread.error_code = error_code; info.si_signo = SIGTRAP; info.si_errno = 0; - info.si_code = TRAP_BRKPT; + info.si_code = get_si_code(condition); info.si_addr = user_mode(regs) ? (void __user *)regs->ip : NULL; force_sig_info(SIGTRAP, &info, tsk); clear_dr7: - set_debugreg(0UL, 7); + set_debugreg(0, 7); preempt_conditional_cli(regs); return; @@ -960,6 +953,7 @@ clear_TF_reenable: set_tsk_thread_flag(tsk, TIF_SINGLESTEP); regs->flags &= ~X86_EFLAGS_TF; preempt_conditional_cli(regs); + return; } static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr) @@ -982,7 +976,7 @@ static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr) asmlinkage void do_coprocessor_error(struct pt_regs *regs) { void __user *ip = (void __user *)(regs->ip); - struct task_struct * task; + struct task_struct *task; siginfo_t info; unsigned short cwd, swd; @@ -1015,49 +1009,49 @@ asmlinkage void do_coprocessor_error(struct pt_regs *regs) cwd = get_fpu_cwd(task); swd = get_fpu_swd(task); switch (swd & ~cwd & 0x3f) { - case 0x000: - default: - break; - case 0x001: /* Invalid Op */ - /* - * swd & 0x240 == 0x040: Stack Underflow - * swd & 0x240 == 0x240: Stack Overflow - * User must clear the SF bit (0x40) if set - */ - info.si_code = FPE_FLTINV; - break; - case 0x002: /* Denormalize */ - case 0x010: /* Underflow */ - info.si_code = FPE_FLTUND; - break; - case 0x004: /* Zero Divide */ - info.si_code = FPE_FLTDIV; - break; - case 0x008: /* Overflow */ - info.si_code = FPE_FLTOVF; - break; - case 0x020: /* Precision */ - info.si_code = FPE_FLTRES; - break; + case 0x000: /* No unmasked exception */ + default: /* Multiple exceptions */ + break; + case 0x001: /* Invalid Op */ + /* + * swd & 0x240 == 0x040: Stack Underflow + * swd & 0x240 == 0x240: Stack Overflow + * User must clear the SF bit (0x40) if set + */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; } force_sig_info(SIGFPE, &info, task); } asmlinkage void bad_intr(void) { - printk("bad interrupt"); + printk("bad interrupt"); } asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) { void __user *ip = (void __user *)(regs->ip); - struct task_struct * task; + struct task_struct *task; siginfo_t info; unsigned short mxcsr; conditional_sti(regs); if (!user_mode(regs) && - kernel_math_error(regs, "kernel simd math error", 19)) + kernel_math_error(regs, "kernel simd math error", 19)) return; /* @@ -1079,30 +1073,30 @@ asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) */ mxcsr = get_fpu_mxcsr(task); switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { - case 0x000: - default: - break; - case 0x001: /* Invalid Op */ - info.si_code = FPE_FLTINV; - break; - case 0x002: /* Denormalize */ - case 0x010: /* Underflow */ - info.si_code = FPE_FLTUND; - break; - case 0x004: /* Zero Divide */ - info.si_code = FPE_FLTDIV; - break; - case 0x008: /* Overflow */ - info.si_code = FPE_FLTOVF; - break; - case 0x020: /* Precision */ - info.si_code = FPE_FLTRES; - break; + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; } force_sig_info(SIGFPE, &info, task); } -asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs) +asmlinkage void do_spurious_interrupt_bug(struct pt_regs *regs) { } @@ -1115,7 +1109,7 @@ asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void) } /* - * 'math_state_restore()' saves the current math information in the + * 'math_state_restore()' saves the current math information in the * old math state array, and gets the new ones from the current task * * Careful.. There are problems with IBM-designed IRQ13 behaviour. @@ -1140,8 +1134,15 @@ asmlinkage void math_state_restore(void) local_irq_disable(); } - clts(); /* Allow maths ops (or we recurse) */ - restore_fpu_checking(&me->thread.xstate->fxsave); + clts(); /* Allow maths ops (or we recurse) */ + /* + * Paranoid restore. send a SIGSEGV if we fail to restore the state. + */ + if (unlikely(restore_fpu_checking(me))) { + stts(); + force_sig(SIGSEGV, me); + return; + } task_thread_info(me)->status |= TS_USEDFPU; me->fpu_counter++; } @@ -1149,64 +1150,59 @@ EXPORT_SYMBOL_GPL(math_state_restore); void __init trap_init(void) { - set_intr_gate(0,÷_error); - set_intr_gate_ist(1,&debug,DEBUG_STACK); - set_intr_gate_ist(2,&nmi,NMI_STACK); - set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */ - set_system_gate(4,&overflow); /* int4 can be called from all */ - set_intr_gate(5,&bounds); - set_intr_gate(6,&invalid_op); - set_intr_gate(7,&device_not_available); - set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK); - set_intr_gate(9,&coprocessor_segment_overrun); - set_intr_gate(10,&invalid_TSS); - set_intr_gate(11,&segment_not_present); - set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK); - set_intr_gate(13,&general_protection); - set_intr_gate(14,&page_fault); - set_intr_gate(15,&spurious_interrupt_bug); - set_intr_gate(16,&coprocessor_error); - set_intr_gate(17,&alignment_check); + set_intr_gate(0, ÷_error); + set_intr_gate_ist(1, &debug, DEBUG_STACK); + set_intr_gate_ist(2, &nmi, NMI_STACK); + /* int3 can be called from all */ + set_system_gate_ist(3, &int3, DEBUG_STACK); + /* int4 can be called from all */ + set_system_gate(4, &overflow); + set_intr_gate(5, &bounds); + set_intr_gate(6, &invalid_op); + set_intr_gate(7, &device_not_available); + set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK); + set_intr_gate(9, &coprocessor_segment_overrun); + set_intr_gate(10, &invalid_TSS); + set_intr_gate(11, &segment_not_present); + set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK); + set_intr_gate(13, &general_protection); + set_intr_gate(14, &page_fault); + set_intr_gate(15, &spurious_interrupt_bug); + set_intr_gate(16, &coprocessor_error); + set_intr_gate(17, &alignment_check); #ifdef CONFIG_X86_MCE - set_intr_gate_ist(18,&machine_check, MCE_STACK); + set_intr_gate_ist(18, &machine_check, MCE_STACK); #endif - set_intr_gate(19,&simd_coprocessor_error); + set_intr_gate(19, &simd_coprocessor_error); #ifdef CONFIG_IA32_EMULATION set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall); #endif - - /* - * initialize the per thread extended state: - */ - init_thread_xstate(); /* - * Should be a barrier for any external CPU state. + * Should be a barrier for any external CPU state: */ cpu_init(); } - static int __init oops_setup(char *s) -{ +{ if (!s) return -EINVAL; if (!strcmp(s, "panic")) panic_on_oops = 1; return 0; -} +} early_param("oops", oops_setup); static int __init kstack_setup(char *s) { if (!s) return -EINVAL; - kstack_depth_to_print = simple_strtoul(s,NULL,0); + kstack_depth_to_print = simple_strtoul(s, NULL, 0); return 0; } early_param("kstack", kstack_setup); - static int __init code_bytes_setup(char *s) { code_bytes = simple_strtoul(s, NULL, 0); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c new file mode 100644 index 00000000000..161bb850fc4 --- /dev/null +++ b/arch/x86/kernel/tsc.c @@ -0,0 +1,849 @@ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/acpi_pmtmr.h> +#include <linux/cpufreq.h> +#include <linux/dmi.h> +#include <linux/delay.h> +#include <linux/clocksource.h> +#include <linux/percpu.h> + +#include <asm/hpet.h> +#include <asm/timer.h> +#include <asm/vgtod.h> +#include <asm/time.h> +#include <asm/delay.h> + +unsigned int cpu_khz; /* TSC clocks / usec, not used here */ +EXPORT_SYMBOL(cpu_khz); +unsigned int tsc_khz; +EXPORT_SYMBOL(tsc_khz); + +/* + * TSC can be unstable due to cpufreq or due to unsynced TSCs + */ +static int tsc_unstable; + +/* native_sched_clock() is called before tsc_init(), so + we must start with the TSC soft disabled to prevent + erroneous rdtsc usage on !cpu_has_tsc processors */ +static int tsc_disabled = -1; + +/* + * Scheduler clock - returns current time in nanosec units. + */ +u64 native_sched_clock(void) +{ + u64 this_offset; + + /* + * Fall back to jiffies if there's no TSC available: + * ( But note that we still use it if the TSC is marked + * unstable. We do this because unlike Time Of Day, + * the scheduler clock tolerates small errors and it's + * very important for it to be as fast as the platform + * can achive it. ) + */ + if (unlikely(tsc_disabled)) { + /* No locking but a rare wrong value is not a big deal: */ + return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); + } + + /* read the Time Stamp Counter: */ + rdtscll(this_offset); + + /* return the value in ns */ + return cycles_2_ns(this_offset); +} + +/* We need to define a real function for sched_clock, to override the + weak default version */ +#ifdef CONFIG_PARAVIRT +unsigned long long sched_clock(void) +{ + return paravirt_sched_clock(); +} +#else +unsigned long long +sched_clock(void) __attribute__((alias("native_sched_clock"))); +#endif + +int check_tsc_unstable(void) +{ + return tsc_unstable; +} +EXPORT_SYMBOL_GPL(check_tsc_unstable); + +#ifdef CONFIG_X86_TSC +int __init notsc_setup(char *str) +{ + printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " + "cannot disable TSC completely.\n"); + tsc_disabled = 1; + return 1; +} +#else +/* + * disable flag for tsc. Takes effect by clearing the TSC cpu flag + * in cpu/common.c + */ +int __init notsc_setup(char *str) +{ + setup_clear_cpu_cap(X86_FEATURE_TSC); + return 1; +} +#endif + +__setup("notsc", notsc_setup); + +#define MAX_RETRIES 5 +#define SMI_TRESHOLD 50000 + +/* + * Read TSC and the reference counters. Take care of SMI disturbance + */ +static u64 tsc_read_refs(u64 *p, int hpet) +{ + u64 t1, t2; + int i; + + for (i = 0; i < MAX_RETRIES; i++) { + t1 = get_cycles(); + if (hpet) + *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; + else + *p = acpi_pm_read_early(); + t2 = get_cycles(); + if ((t2 - t1) < SMI_TRESHOLD) + return t2; + } + return ULLONG_MAX; +} + +/* + * Calculate the TSC frequency from HPET reference + */ +static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2) +{ + u64 tmp; + + if (hpet2 < hpet1) + hpet2 += 0x100000000ULL; + hpet2 -= hpet1; + tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); + do_div(tmp, 1000000); + do_div(deltatsc, tmp); + + return (unsigned long) deltatsc; +} + +/* + * Calculate the TSC frequency from PMTimer reference + */ +static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2) +{ + u64 tmp; + + if (!pm1 && !pm2) + return ULONG_MAX; + + if (pm2 < pm1) + pm2 += (u64)ACPI_PM_OVRRUN; + pm2 -= pm1; + tmp = pm2 * 1000000000LL; + do_div(tmp, PMTMR_TICKS_PER_SEC); + do_div(deltatsc, tmp); + + return (unsigned long) deltatsc; +} + +#define CAL_MS 10 +#define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS)) +#define CAL_PIT_LOOPS 1000 + +#define CAL2_MS 50 +#define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS)) +#define CAL2_PIT_LOOPS 5000 + + +/* + * Try to calibrate the TSC against the Programmable + * Interrupt Timer and return the frequency of the TSC + * in kHz. + * + * Return ULONG_MAX on failure to calibrate. + */ +static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin) +{ + u64 tsc, t1, t2, delta; + unsigned long tscmin, tscmax; + int pitcnt; + + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Setup CTC channel 2* for mode 0, (interrupt on terminal + * count mode), binary count. Set the latch register to 50ms + * (LSB then MSB) to begin countdown. + */ + outb(0xb0, 0x43); + outb(latch & 0xff, 0x42); + outb(latch >> 8, 0x42); + + tsc = t1 = t2 = get_cycles(); + + pitcnt = 0; + tscmax = 0; + tscmin = ULONG_MAX; + while ((inb(0x61) & 0x20) == 0) { + t2 = get_cycles(); + delta = t2 - tsc; + tsc = t2; + if ((unsigned long) delta < tscmin) + tscmin = (unsigned int) delta; + if ((unsigned long) delta > tscmax) + tscmax = (unsigned int) delta; + pitcnt++; + } + + /* + * Sanity checks: + * + * If we were not able to read the PIT more than loopmin + * times, then we have been hit by a massive SMI + * + * If the maximum is 10 times larger than the minimum, + * then we got hit by an SMI as well. + */ + if (pitcnt < loopmin || tscmax > 10 * tscmin) + return ULONG_MAX; + + /* Calculate the PIT value */ + delta = t2 - t1; + do_div(delta, ms); + return delta; +} + +/* + * This reads the current MSB of the PIT counter, and + * checks if we are running on sufficiently fast and + * non-virtualized hardware. + * + * Our expectations are: + * + * - the PIT is running at roughly 1.19MHz + * + * - each IO is going to take about 1us on real hardware, + * but we allow it to be much faster (by a factor of 10) or + * _slightly_ slower (ie we allow up to a 2us read+counter + * update - anything else implies a unacceptably slow CPU + * or PIT for the fast calibration to work. + * + * - with 256 PIT ticks to read the value, we have 214us to + * see the same MSB (and overhead like doing a single TSC + * read per MSB value etc). + * + * - We're doing 2 reads per loop (LSB, MSB), and we expect + * them each to take about a microsecond on real hardware. + * So we expect a count value of around 100. But we'll be + * generous, and accept anything over 50. + * + * - if the PIT is stuck, and we see *many* more reads, we + * return early (and the next caller of pit_expect_msb() + * then consider it a failure when they don't see the + * next expected value). + * + * These expectations mean that we know that we have seen the + * transition from one expected value to another with a fairly + * high accuracy, and we didn't miss any events. We can thus + * use the TSC value at the transitions to calculate a pretty + * good value for the TSC frequencty. + */ +static inline int pit_expect_msb(unsigned char val) +{ + int count = 0; + + for (count = 0; count < 50000; count++) { + /* Ignore LSB */ + inb(0x42); + if (inb(0x42) != val) + break; + } + return count > 50; +} + +/* + * How many MSB values do we want to see? We aim for a + * 15ms calibration, which assuming a 2us counter read + * error should give us roughly 150 ppm precision for + * the calibration. + */ +#define QUICK_PIT_MS 15 +#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256) + +static unsigned long quick_pit_calibrate(void) +{ + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Counter 2, mode 0 (one-shot), binary count + * + * NOTE! Mode 2 decrements by two (and then the + * output is flipped each time, giving the same + * final output frequency as a decrement-by-one), + * so mode 0 is much better when looking at the + * individual counts. + */ + outb(0xb0, 0x43); + + /* Start at 0xffff */ + outb(0xff, 0x42); + outb(0xff, 0x42); + + if (pit_expect_msb(0xff)) { + int i; + u64 t1, t2, delta; + unsigned char expect = 0xfe; + + t1 = get_cycles(); + for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) { + if (!pit_expect_msb(expect)) + goto failed; + } + t2 = get_cycles(); + + /* + * Make sure we can rely on the second TSC timestamp: + */ + if (!pit_expect_msb(expect)) + goto failed; + + /* + * Ok, if we get here, then we've seen the + * MSB of the PIT decrement QUICK_PIT_ITERATIONS + * times, and each MSB had many hits, so we never + * had any sudden jumps. + * + * As a result, we can depend on there not being + * any odd delays anywhere, and the TSC reads are + * reliable. + * + * kHz = ticks / time-in-seconds / 1000; + * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000 + * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000) + */ + delta = (t2 - t1)*PIT_TICK_RATE; + do_div(delta, QUICK_PIT_ITERATIONS*256*1000); + printk("Fast TSC calibration using PIT\n"); + return delta; + } +failed: + return 0; +} + +/** + * native_calibrate_tsc - calibrate the tsc on boot + */ +unsigned long native_calibrate_tsc(void) +{ + u64 tsc1, tsc2, delta, ref1, ref2; + unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; + unsigned long flags, latch, ms, fast_calibrate; + int hpet = is_hpet_enabled(), i, loopmin; + + local_irq_save(flags); + fast_calibrate = quick_pit_calibrate(); + local_irq_restore(flags); + if (fast_calibrate) + return fast_calibrate; + + /* + * Run 5 calibration loops to get the lowest frequency value + * (the best estimate). We use two different calibration modes + * here: + * + * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and + * load a timeout of 50ms. We read the time right after we + * started the timer and wait until the PIT count down reaches + * zero. In each wait loop iteration we read the TSC and check + * the delta to the previous read. We keep track of the min + * and max values of that delta. The delta is mostly defined + * by the IO time of the PIT access, so we can detect when a + * SMI/SMM disturbance happend between the two reads. If the + * maximum time is significantly larger than the minimum time, + * then we discard the result and have another try. + * + * 2) Reference counter. If available we use the HPET or the + * PMTIMER as a reference to check the sanity of that value. + * We use separate TSC readouts and check inside of the + * reference read for a SMI/SMM disturbance. We dicard + * disturbed values here as well. We do that around the PIT + * calibration delay loop as we have to wait for a certain + * amount of time anyway. + */ + + /* Preset PIT loop values */ + latch = CAL_LATCH; + ms = CAL_MS; + loopmin = CAL_PIT_LOOPS; + + for (i = 0; i < 3; i++) { + unsigned long tsc_pit_khz; + + /* + * Read the start value and the reference count of + * hpet/pmtimer when available. Then do the PIT + * calibration, which will take at least 50ms, and + * read the end value. + */ + local_irq_save(flags); + tsc1 = tsc_read_refs(&ref1, hpet); + tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin); + tsc2 = tsc_read_refs(&ref2, hpet); + local_irq_restore(flags); + + /* Pick the lowest PIT TSC calibration so far */ + tsc_pit_min = min(tsc_pit_min, tsc_pit_khz); + + /* hpet or pmtimer available ? */ + if (!hpet && !ref1 && !ref2) + continue; + + /* Check, whether the sampling was disturbed by an SMI */ + if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) + continue; + + tsc2 = (tsc2 - tsc1) * 1000000LL; + if (hpet) + tsc2 = calc_hpet_ref(tsc2, ref1, ref2); + else + tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2); + + tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2); + + /* Check the reference deviation */ + delta = ((u64) tsc_pit_min) * 100; + do_div(delta, tsc_ref_min); + + /* + * If both calibration results are inside a 10% window + * then we can be sure, that the calibration + * succeeded. We break out of the loop right away. We + * use the reference value, as it is more precise. + */ + if (delta >= 90 && delta <= 110) { + printk(KERN_INFO + "TSC: PIT calibration matches %s. %d loops\n", + hpet ? "HPET" : "PMTIMER", i + 1); + return tsc_ref_min; + } + + /* + * Check whether PIT failed more than once. This + * happens in virtualized environments. We need to + * give the virtual PC a slightly longer timeframe for + * the HPET/PMTIMER to make the result precise. + */ + if (i == 1 && tsc_pit_min == ULONG_MAX) { + latch = CAL2_LATCH; + ms = CAL2_MS; + loopmin = CAL2_PIT_LOOPS; + } + } + + /* + * Now check the results. + */ + if (tsc_pit_min == ULONG_MAX) { + /* PIT gave no useful value */ + printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n"); + + /* We don't have an alternative source, disable TSC */ + if (!hpet && !ref1 && !ref2) { + printk("TSC: No reference (HPET/PMTIMER) available\n"); + return 0; + } + + /* The alternative source failed as well, disable TSC */ + if (tsc_ref_min == ULONG_MAX) { + printk(KERN_WARNING "TSC: HPET/PMTIMER calibration " + "failed.\n"); + return 0; + } + + /* Use the alternative source */ + printk(KERN_INFO "TSC: using %s reference calibration\n", + hpet ? "HPET" : "PMTIMER"); + + return tsc_ref_min; + } + + /* We don't have an alternative source, use the PIT calibration value */ + if (!hpet && !ref1 && !ref2) { + printk(KERN_INFO "TSC: Using PIT calibration value\n"); + return tsc_pit_min; + } + + /* The alternative source failed, use the PIT calibration value */ + if (tsc_ref_min == ULONG_MAX) { + printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. " + "Using PIT calibration\n"); + return tsc_pit_min; + } + + /* + * The calibration values differ too much. In doubt, we use + * the PIT value as we know that there are PMTIMERs around + * running at double speed. At least we let the user know: + */ + printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n", + hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min); + printk(KERN_INFO "TSC: Using PIT calibration value\n"); + return tsc_pit_min; +} + +#ifdef CONFIG_X86_32 +/* Only called from the Powernow K7 cpu freq driver */ +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + tsc_khz = calibrate_tsc(); + cpu_khz = tsc_khz; + cpu_data(0).loops_per_jiffy = + cpufreq_scale(cpu_data(0).loops_per_jiffy, + cpu_khz_old, cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} + +EXPORT_SYMBOL(recalibrate_cpu_khz); + +#endif /* CONFIG_X86_32 */ + +/* Accelerators for sched_clock() + * convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better precision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ + +DEFINE_PER_CPU(unsigned long, cyc2ns); + +static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu) +{ + unsigned long long tsc_now, ns_now; + unsigned long flags, *scale; + + local_irq_save(flags); + sched_clock_idle_sleep_event(); + + scale = &per_cpu(cyc2ns, cpu); + + rdtscll(tsc_now); + ns_now = __cycles_2_ns(tsc_now); + + if (cpu_khz) + *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz; + + sched_clock_idle_wakeup_event(0); + local_irq_restore(flags); +} + +#ifdef CONFIG_CPU_FREQ + +/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency + * changes. + * + * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's + * not that important because current Opteron setups do not support + * scaling on SMP anyroads. + * + * Should fix up last_tsc too. Currently gettimeofday in the + * first tick after the change will be slightly wrong. + */ + +static unsigned int ref_freq; +static unsigned long loops_per_jiffy_ref; +static unsigned long tsc_khz_ref; + +static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_freqs *freq = data; + unsigned long *lpj, dummy; + + if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC)) + return 0; + + lpj = &dummy; + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) +#ifdef CONFIG_SMP + lpj = &cpu_data(freq->cpu).loops_per_jiffy; +#else + lpj = &boot_cpu_data.loops_per_jiffy; +#endif + + if (!ref_freq) { + ref_freq = freq->old; + loops_per_jiffy_ref = *lpj; + tsc_khz_ref = tsc_khz; + } + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + *lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); + + tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + mark_tsc_unstable("cpufreq changes"); + } + + set_cyc2ns_scale(tsc_khz, freq->cpu); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + if (!cpu_has_tsc) + return 0; + if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + return 0; + cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + return 0; +} + +core_initcall(cpufreq_tsc); + +#endif /* CONFIG_CPU_FREQ */ + +/* clocksource code */ + +static struct clocksource clocksource_tsc; + +/* + * We compare the TSC to the cycle_last value in the clocksource + * structure to avoid a nasty time-warp. This can be observed in a + * very small window right after one CPU updated cycle_last under + * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which + * is smaller than the cycle_last reference value due to a TSC which + * is slighty behind. This delta is nowhere else observable, but in + * that case it results in a forward time jump in the range of hours + * due to the unsigned delta calculation of the time keeping core + * code, which is necessary to support wrapping clocksources like pm + * timer. + */ +static cycle_t read_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles(); + + return ret >= clocksource_tsc.cycle_last ? + ret : clocksource_tsc.cycle_last; +} + +#ifdef CONFIG_X86_64 +static cycle_t __vsyscall_fn vread_tsc(void) +{ + cycle_t ret = (cycle_t)vget_cycles(); + + return ret >= __vsyscall_gtod_data.clock.cycle_last ? + ret : __vsyscall_gtod_data.clock.cycle_last; +} +#endif + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, +#ifdef CONFIG_X86_64 + .vread = vread_tsc, +#endif +}; + +void mark_tsc_unstable(char *reason) +{ + if (!tsc_unstable) { + tsc_unstable = 1; + printk("Marking TSC unstable due to %s\n", reason); + /* Change only the rating, when not registered */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; + } +} + +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", + d->ident); + tsc_unstable = 1; + return 0; +} + +/* List of systems that have known TSC problems */ +static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { + { + .callback = dmi_mark_tsc_unstable, + .ident = "IBM Thinkpad 380XD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), + }, + }, + {} +}; + +/* + * Geode_LX - the OLPC CPU has a possibly a very reliable TSC + */ +#ifdef CONFIG_MGEODE_LX +/* RTSC counts during suspend */ +#define RTSC_SUSP 0x100 + +static void __init check_geode_tsc_reliable(void) +{ + unsigned long res_low, res_high; + + rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high); + if (res_low & RTSC_SUSP) + clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; +} +#else +static inline void check_geode_tsc_reliable(void) { } +#endif + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +__cpuinit int unsynchronized_tsc(void) +{ + if (!cpu_has_tsc || tsc_unstable) + return 1; + +#ifdef CONFIG_SMP + if (apic_is_clustered_box()) + return 1; +#endif + + if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + return 0; + /* + * Intel systems are normally all synchronized. + * Exceptions must mark TSC as unstable: + */ + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { + /* assume multi socket systems are not synchronized: */ + if (num_possible_cpus() > 1) + tsc_unstable = 1; + } + + return tsc_unstable; +} + +static void __init init_tsc_clocksource(void) +{ + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); + /* lower the rating if we already know its unstable: */ + if (check_tsc_unstable()) { + clocksource_tsc.rating = 0; + clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; + } + clocksource_register(&clocksource_tsc); +} + +void __init tsc_init(void) +{ + u64 lpj; + int cpu; + + if (!cpu_has_tsc) + return; + + tsc_khz = calibrate_tsc(); + cpu_khz = tsc_khz; + + if (!tsc_khz) { + mark_tsc_unstable("could not calculate TSC khz"); + return; + } + +#ifdef CONFIG_X86_64 + if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && + (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)) + cpu_khz = calibrate_cpu(); +#endif + + lpj = ((u64)tsc_khz * 1000); + do_div(lpj, HZ); + lpj_fine = lpj; + + printk("Detected %lu.%03lu MHz processor.\n", + (unsigned long)cpu_khz / 1000, + (unsigned long)cpu_khz % 1000); + + /* + * Secondary CPUs do not run through tsc_init(), so set up + * all the scale factors for all CPUs, assuming the same + * speed as the bootup CPU. (cpufreq notifiers will fix this + * up if their speed diverges) + */ + for_each_possible_cpu(cpu) + set_cyc2ns_scale(cpu_khz, cpu); + + if (tsc_disabled > 0) + return; + + /* now allow native_sched_clock() to use rdtsc */ + tsc_disabled = 0; + + use_tsc_delay(); + /* Check and install the TSC clocksource */ + dmi_check_system(bad_tsc_dmi_table); + + if (unsynchronized_tsc()) + mark_tsc_unstable("TSCs unsynchronized"); + + check_geode_tsc_reliable(); + init_tsc_clocksource(); +} + diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c deleted file mode 100644 index 068759db63d..00000000000 --- a/arch/x86/kernel/tsc_32.c +++ /dev/null @@ -1,453 +0,0 @@ -#include <linux/sched.h> -#include <linux/clocksource.h> -#include <linux/workqueue.h> -#include <linux/cpufreq.h> -#include <linux/jiffies.h> -#include <linux/init.h> -#include <linux/dmi.h> -#include <linux/percpu.h> - -#include <asm/delay.h> -#include <asm/tsc.h> -#include <asm/io.h> -#include <asm/timer.h> - -#include "mach_timer.h" - -static int tsc_disabled; - -/* - * On some systems the TSC frequency does not - * change with the cpu frequency. So we need - * an extra value to store the TSC freq - */ -unsigned int tsc_khz; -EXPORT_SYMBOL_GPL(tsc_khz); - -#ifdef CONFIG_X86_TSC -static int __init tsc_setup(char *str) -{ - printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " - "cannot disable TSC completely.\n"); - tsc_disabled = 1; - return 1; -} -#else -/* - * disable flag for tsc. Takes effect by clearing the TSC cpu flag - * in cpu/common.c - */ -static int __init tsc_setup(char *str) -{ - setup_clear_cpu_cap(X86_FEATURE_TSC); - return 1; -} -#endif - -__setup("notsc", tsc_setup); - -/* - * code to mark and check if the TSC is unstable - * due to cpufreq or due to unsynced TSCs - */ -static int tsc_unstable; - -int check_tsc_unstable(void) -{ - return tsc_unstable; -} -EXPORT_SYMBOL_GPL(check_tsc_unstable); - -/* Accelerators for sched_clock() - * convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better precision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ - -DEFINE_PER_CPU(unsigned long, cyc2ns); - -static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu) -{ - unsigned long long tsc_now, ns_now; - unsigned long flags, *scale; - - local_irq_save(flags); - sched_clock_idle_sleep_event(); - - scale = &per_cpu(cyc2ns, cpu); - - rdtscll(tsc_now); - ns_now = __cycles_2_ns(tsc_now); - - if (cpu_khz) - *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz; - - /* - * Start smoothly with the new frequency: - */ - sched_clock_idle_wakeup_event(0); - local_irq_restore(flags); -} - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long native_sched_clock(void) -{ - unsigned long long this_offset; - - /* - * Fall back to jiffies if there's no TSC available: - * ( But note that we still use it if the TSC is marked - * unstable. We do this because unlike Time Of Day, - * the scheduler clock tolerates small errors and it's - * very important for it to be as fast as the platform - * can achive it. ) - */ - if (unlikely(tsc_disabled)) - /* No locking but a rare wrong value is not a big deal: */ - return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); - - /* read the Time Stamp Counter: */ - rdtscll(this_offset); - - /* return the value in ns */ - return cycles_2_ns(this_offset); -} - -/* We need to define a real function for sched_clock, to override the - weak default version */ -#ifdef CONFIG_PARAVIRT -unsigned long long sched_clock(void) -{ - return paravirt_sched_clock(); -} -#else -unsigned long long sched_clock(void) - __attribute__((alias("native_sched_clock"))); -#endif - -unsigned long native_calculate_cpu_khz(void) -{ - unsigned long long start, end; - unsigned long count; - u64 delta64 = (u64)ULLONG_MAX; - int i; - unsigned long flags; - - local_irq_save(flags); - - /* run 3 times to ensure the cache is warm and to get an accurate reading */ - for (i = 0; i < 3; i++) { - mach_prepare_counter(); - rdtscll(start); - mach_countup(&count); - rdtscll(end); - - /* - * Error: ECTCNEVERSET - * The CTC wasn't reliable: we got a hit on the very first read, - * or the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ - if (count <= 1) - continue; - - /* cpu freq too slow: */ - if ((end - start) <= CALIBRATE_TIME_MSEC) - continue; - - /* - * We want the minimum time of all runs in case one of them - * is inaccurate due to SMI or other delay - */ - delta64 = min(delta64, (end - start)); - } - - /* cpu freq too fast (or every run was bad): */ - if (delta64 > (1ULL<<32)) - goto err; - - delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */ - do_div(delta64,CALIBRATE_TIME_MSEC); - - local_irq_restore(flags); - return (unsigned long)delta64; -err: - local_irq_restore(flags); - return 0; -} - -int recalibrate_cpu_khz(void) -{ -#ifndef CONFIG_SMP - unsigned long cpu_khz_old = cpu_khz; - - if (cpu_has_tsc) { - cpu_khz = calculate_cpu_khz(); - tsc_khz = cpu_khz; - cpu_data(0).loops_per_jiffy = - cpufreq_scale(cpu_data(0).loops_per_jiffy, - cpu_khz_old, cpu_khz); - return 0; - } else - return -ENODEV; -#else - return -ENODEV; -#endif -} - -EXPORT_SYMBOL(recalibrate_cpu_khz); - -#ifdef CONFIG_CPU_FREQ - -/* - * if the CPU frequency is scaled, TSC-based delays will need a different - * loops_per_jiffy value to function properly. - */ -static unsigned int ref_freq; -static unsigned long loops_per_jiffy_ref; -static unsigned long cpu_khz_ref; - -static int -time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) -{ - struct cpufreq_freqs *freq = data; - - if (!ref_freq) { - if (!freq->old){ - ref_freq = freq->new; - return 0; - } - ref_freq = freq->old; - loops_per_jiffy_ref = cpu_data(freq->cpu).loops_per_jiffy; - cpu_khz_ref = cpu_khz; - } - - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - cpu_data(freq->cpu).loops_per_jiffy = - cpufreq_scale(loops_per_jiffy_ref, - ref_freq, freq->new); - - if (cpu_khz) { - - if (num_online_cpus() == 1) - cpu_khz = cpufreq_scale(cpu_khz_ref, - ref_freq, freq->new); - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { - tsc_khz = cpu_khz; - set_cyc2ns_scale(cpu_khz, freq->cpu); - /* - * TSC based sched_clock turns - * to junk w/ cpufreq - */ - mark_tsc_unstable("cpufreq changes"); - } - } - } - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - -static int __init cpufreq_tsc(void) -{ - return cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); -} -core_initcall(cpufreq_tsc); - -#endif - -/* clock source code */ - -static unsigned long current_tsc_khz; -static struct clocksource clocksource_tsc; - -/* - * We compare the TSC to the cycle_last value in the clocksource - * structure to avoid a nasty time-warp issue. This can be observed in - * a very small window right after one CPU updated cycle_last under - * xtime lock and the other CPU reads a TSC value which is smaller - * than the cycle_last reference value due to a TSC which is slighty - * behind. This delta is nowhere else observable, but in that case it - * results in a forward time jump in the range of hours due to the - * unsigned delta calculation of the time keeping core code, which is - * necessary to support wrapping clocksources like pm timer. - */ -static cycle_t read_tsc(void) -{ - cycle_t ret; - - rdtscll(ret); - - return ret >= clocksource_tsc.cycle_last ? - ret : clocksource_tsc.cycle_last; -} - -static struct clocksource clocksource_tsc = { - .name = "tsc", - .rating = 300, - .read = read_tsc, - .mask = CLOCKSOURCE_MASK(64), - .mult = 0, /* to be set */ - .shift = 22, - .flags = CLOCK_SOURCE_IS_CONTINUOUS | - CLOCK_SOURCE_MUST_VERIFY, -}; - -void mark_tsc_unstable(char *reason) -{ - if (!tsc_unstable) { - tsc_unstable = 1; - printk("Marking TSC unstable due to: %s.\n", reason); - /* Can be called before registration */ - if (clocksource_tsc.mult) - clocksource_change_rating(&clocksource_tsc, 0); - else - clocksource_tsc.rating = 0; - } -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - -static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d) -{ - printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", - d->ident); - tsc_unstable = 1; - return 0; -} - -/* List of systems that have known TSC problems */ -static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { - { - .callback = dmi_mark_tsc_unstable, - .ident = "IBM Thinkpad 380XD", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), - }, - }, - {} -}; - -/* - * Make an educated guess if the TSC is trustworthy and synchronized - * over all CPUs. - */ -__cpuinit int unsynchronized_tsc(void) -{ - if (!cpu_has_tsc || tsc_unstable) - return 1; - - /* Anything with constant TSC should be synchronized */ - if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) - return 0; - - /* - * Intel systems are normally all synchronized. - * Exceptions must mark TSC as unstable: - */ - if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { - /* assume multi socket systems are not synchronized: */ - if (num_possible_cpus() > 1) - tsc_unstable = 1; - } - return tsc_unstable; -} - -/* - * Geode_LX - the OLPC CPU has a possibly a very reliable TSC - */ -#ifdef CONFIG_MGEODE_LX -/* RTSC counts during suspend */ -#define RTSC_SUSP 0x100 - -static void __init check_geode_tsc_reliable(void) -{ - unsigned long res_low, res_high; - - rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high); - if (res_low & RTSC_SUSP) - clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; -} -#else -static inline void check_geode_tsc_reliable(void) { } -#endif - - -void __init tsc_init(void) -{ - int cpu; - - if (!cpu_has_tsc || tsc_disabled) { - /* Disable the TSC in case of !cpu_has_tsc */ - tsc_disabled = 1; - return; - } - - cpu_khz = calculate_cpu_khz(); - tsc_khz = cpu_khz; - - if (!cpu_khz) { - mark_tsc_unstable("could not calculate TSC khz"); - /* - * We need to disable the TSC completely in this case - * to prevent sched_clock() from using it. - */ - tsc_disabled = 1; - return; - } - - printk("Detected %lu.%03lu MHz processor.\n", - (unsigned long)cpu_khz / 1000, - (unsigned long)cpu_khz % 1000); - - /* - * Secondary CPUs do not run through tsc_init(), so set up - * all the scale factors for all CPUs, assuming the same - * speed as the bootup CPU. (cpufreq notifiers will fix this - * up if their speed diverges) - */ - for_each_possible_cpu(cpu) - set_cyc2ns_scale(cpu_khz, cpu); - - use_tsc_delay(); - - /* Check and install the TSC clocksource */ - dmi_check_system(bad_tsc_dmi_table); - - unsynchronized_tsc(); - check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); - /* lower the rating if we already know its unstable: */ - if (check_tsc_unstable()) { - clocksource_tsc.rating = 0; - clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; - } - clocksource_register(&clocksource_tsc); -} diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c deleted file mode 100644 index 1784b8077a1..00000000000 --- a/arch/x86/kernel/tsc_64.c +++ /dev/null @@ -1,357 +0,0 @@ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/clocksource.h> -#include <linux/time.h> -#include <linux/acpi.h> -#include <linux/cpufreq.h> -#include <linux/acpi_pmtmr.h> - -#include <asm/hpet.h> -#include <asm/timex.h> -#include <asm/timer.h> -#include <asm/vgtod.h> - -static int notsc __initdata = 0; - -unsigned int cpu_khz; /* TSC clocks / usec, not used here */ -EXPORT_SYMBOL(cpu_khz); -unsigned int tsc_khz; -EXPORT_SYMBOL(tsc_khz); - -/* Accelerators for sched_clock() - * convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better precision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ -DEFINE_PER_CPU(unsigned long, cyc2ns); - -static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu) -{ - unsigned long long tsc_now, ns_now; - unsigned long flags, *scale; - - local_irq_save(flags); - sched_clock_idle_sleep_event(); - - scale = &per_cpu(cyc2ns, cpu); - - rdtscll(tsc_now); - ns_now = __cycles_2_ns(tsc_now); - - if (cpu_khz) - *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz; - - sched_clock_idle_wakeup_event(0); - local_irq_restore(flags); -} - -unsigned long long native_sched_clock(void) -{ - unsigned long a = 0; - - /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, - * which means it is not completely exact and may not be monotonous - * between CPUs. But the errors should be too small to matter for - * scheduling purposes. - */ - - rdtscll(a); - return cycles_2_ns(a); -} - -/* We need to define a real function for sched_clock, to override the - weak default version */ -#ifdef CONFIG_PARAVIRT -unsigned long long sched_clock(void) -{ - return paravirt_sched_clock(); -} -#else -unsigned long long -sched_clock(void) __attribute__((alias("native_sched_clock"))); -#endif - - -static int tsc_unstable; - -int check_tsc_unstable(void) -{ - return tsc_unstable; -} -EXPORT_SYMBOL_GPL(check_tsc_unstable); - -#ifdef CONFIG_CPU_FREQ - -/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency - * changes. - * - * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's - * not that important because current Opteron setups do not support - * scaling on SMP anyroads. - * - * Should fix up last_tsc too. Currently gettimeofday in the - * first tick after the change will be slightly wrong. - */ - -static unsigned int ref_freq; -static unsigned long loops_per_jiffy_ref; -static unsigned long tsc_khz_ref; - -static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - unsigned long *lpj, dummy; - - if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC)) - return 0; - - lpj = &dummy; - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) -#ifdef CONFIG_SMP - lpj = &cpu_data(freq->cpu).loops_per_jiffy; -#else - lpj = &boot_cpu_data.loops_per_jiffy; -#endif - - if (!ref_freq) { - ref_freq = freq->old; - loops_per_jiffy_ref = *lpj; - tsc_khz_ref = tsc_khz; - } - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - *lpj = - cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); - - tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - mark_tsc_unstable("cpufreq changes"); - } - - set_cyc2ns_scale(tsc_khz_ref, freq->cpu); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - -static int __init cpufreq_tsc(void) -{ - cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - return 0; -} - -core_initcall(cpufreq_tsc); - -#endif - -#define MAX_RETRIES 5 -#define SMI_TRESHOLD 50000 - -/* - * Read TSC and the reference counters. Take care of SMI disturbance - */ -static unsigned long __init tsc_read_refs(unsigned long *pm, - unsigned long *hpet) -{ - unsigned long t1, t2; - int i; - - for (i = 0; i < MAX_RETRIES; i++) { - t1 = get_cycles(); - if (hpet) - *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; - else - *pm = acpi_pm_read_early(); - t2 = get_cycles(); - if ((t2 - t1) < SMI_TRESHOLD) - return t2; - } - return ULONG_MAX; -} - -/** - * tsc_calibrate - calibrate the tsc on boot - */ -void __init tsc_calibrate(void) -{ - unsigned long flags, tsc1, tsc2, tr1, tr2, pm1, pm2, hpet1, hpet2; - int hpet = is_hpet_enabled(), cpu; - - local_irq_save(flags); - - tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL); - - outb((inb(0x61) & ~0x02) | 0x01, 0x61); - - outb(0xb0, 0x43); - outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); - outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); - tr1 = get_cycles(); - while ((inb(0x61) & 0x20) == 0); - tr2 = get_cycles(); - - tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL); - - local_irq_restore(flags); - - /* - * Preset the result with the raw and inaccurate PIT - * calibration value - */ - tsc_khz = (tr2 - tr1) / 50; - - /* hpet or pmtimer available ? */ - if (!hpet && !pm1 && !pm2) { - printk(KERN_INFO "TSC calibrated against PIT\n"); - goto out; - } - - /* Check, whether the sampling was disturbed by an SMI */ - if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) { - printk(KERN_WARNING "TSC calibration disturbed by SMI, " - "using PIT calibration result\n"); - goto out; - } - - tsc2 = (tsc2 - tsc1) * 1000000L; - - if (hpet) { - printk(KERN_INFO "TSC calibrated against HPET\n"); - if (hpet2 < hpet1) - hpet2 += 0x100000000; - hpet2 -= hpet1; - tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; - } else { - printk(KERN_INFO "TSC calibrated against PM_TIMER\n"); - if (pm2 < pm1) - pm2 += ACPI_PM_OVRRUN; - pm2 -= pm1; - tsc1 = (pm2 * 1000000000) / PMTMR_TICKS_PER_SEC; - } - - tsc_khz = tsc2 / tsc1; - -out: - for_each_possible_cpu(cpu) - set_cyc2ns_scale(tsc_khz, cpu); -} - -/* - * Make an educated guess if the TSC is trustworthy and synchronized - * over all CPUs. - */ -__cpuinit int unsynchronized_tsc(void) -{ - if (tsc_unstable) - return 1; - -#ifdef CONFIG_SMP - if (apic_is_clustered_box()) - return 1; -#endif - - if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) - return 0; - - /* Assume multi socket systems are not synchronized */ - return num_present_cpus() > 1; -} - -int __init notsc_setup(char *s) -{ - notsc = 1; - return 1; -} - -__setup("notsc", notsc_setup); - -static struct clocksource clocksource_tsc; - -/* - * We compare the TSC to the cycle_last value in the clocksource - * structure to avoid a nasty time-warp. This can be observed in a - * very small window right after one CPU updated cycle_last under - * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which - * is smaller than the cycle_last reference value due to a TSC which - * is slighty behind. This delta is nowhere else observable, but in - * that case it results in a forward time jump in the range of hours - * due to the unsigned delta calculation of the time keeping core - * code, which is necessary to support wrapping clocksources like pm - * timer. - */ -static cycle_t read_tsc(void) -{ - cycle_t ret = (cycle_t)get_cycles(); - - return ret >= clocksource_tsc.cycle_last ? - ret : clocksource_tsc.cycle_last; -} - -static cycle_t __vsyscall_fn vread_tsc(void) -{ - cycle_t ret = (cycle_t)vget_cycles(); - - return ret >= __vsyscall_gtod_data.clock.cycle_last ? - ret : __vsyscall_gtod_data.clock.cycle_last; -} - -static struct clocksource clocksource_tsc = { - .name = "tsc", - .rating = 300, - .read = read_tsc, - .mask = CLOCKSOURCE_MASK(64), - .shift = 22, - .flags = CLOCK_SOURCE_IS_CONTINUOUS | - CLOCK_SOURCE_MUST_VERIFY, - .vread = vread_tsc, -}; - -void mark_tsc_unstable(char *reason) -{ - if (!tsc_unstable) { - tsc_unstable = 1; - printk("Marking TSC unstable due to %s\n", reason); - /* Change only the rating, when not registered */ - if (clocksource_tsc.mult) - clocksource_change_rating(&clocksource_tsc, 0); - else - clocksource_tsc.rating = 0; - } -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - -void __init init_tsc_clocksource(void) -{ - if (!notsc) { - clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, - clocksource_tsc.shift); - if (check_tsc_unstable()) - clocksource_tsc.rating = 0; - - clocksource_register(&clocksource_tsc); - } -} diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c index 0577825cf89..9ffb01c31c4 100644 --- a/arch/x86/kernel/tsc_sync.c +++ b/arch/x86/kernel/tsc_sync.c @@ -88,11 +88,9 @@ static __cpuinit void check_tsc_warp(void) __raw_spin_unlock(&sync_lock); } } - if (!(now-start)) { - printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n", + WARN(!(now-start), + "Warning: zero tsc calibration delta: %Ld [max: %Ld]\n", now-start, end-start); - WARN_ON(1); - } } /* diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c new file mode 100644 index 00000000000..61a97e616f7 --- /dev/null +++ b/arch/x86/kernel/visws_quirks.c @@ -0,0 +1,691 @@ +/* + * SGI Visual Workstation support and quirks, unmaintained. + * + * Split out from setup.c by davej@suse.de + * + * Copyright (C) 1999 Bent Hagemark, Ingo Molnar + * + * SGI Visual Workstation interrupt controller + * + * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC + * which serves as the main interrupt controller in the system. Non-legacy + * hardware in the system uses this controller directly. Legacy devices + * are connected to the PIIX4 which in turn has its 8259(s) connected to + * a of the Cobalt APIC entry. + * + * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com + * + * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru> + */ +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/visws/cobalt.h> +#include <asm/visws/piix4.h> +#include <asm/arch_hooks.h> +#include <asm/io_apic.h> +#include <asm/fixmap.h> +#include <asm/reboot.h> +#include <asm/setup.h> +#include <asm/e820.h> +#include <asm/io.h> + +#include <mach_ipi.h> + +#include "mach_apic.h" + +#include <linux/kernel_stat.h> + +#include <asm/i8259.h> +#include <asm/irq_vectors.h> +#include <asm/visws/lithium.h> + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +extern int no_broadcast; + +#include <asm/apic.h> + +char visws_board_type = -1; +char visws_board_rev = -1; + +int is_visws_box(void) +{ + return visws_board_type >= 0; +} + +static int __init visws_time_init(void) +{ + printk(KERN_INFO "Starting Cobalt Timer system clock\n"); + + /* Set the countdown value */ + co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); + + /* Start the timer */ + co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN); + + /* Enable (unmask) the timer interrupt */ + co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); + + /* + * Zero return means the generic timer setup code will set up + * the standard vector: + */ + return 0; +} + +static int __init visws_pre_intr_init(void) +{ + init_VISWS_APIC_irqs(); + + /* + * We dont want ISA irqs to be set up by the generic code: + */ + return 1; +} + +/* Quirk for machine specific memory setup. */ + +#define MB (1024 * 1024) + +unsigned long sgivwfb_mem_phys; +unsigned long sgivwfb_mem_size; +EXPORT_SYMBOL(sgivwfb_mem_phys); +EXPORT_SYMBOL(sgivwfb_mem_size); + +long long mem_size __initdata = 0; + +static char * __init visws_memory_setup(void) +{ + long long gfx_mem_size = 8 * MB; + + mem_size = boot_params.alt_mem_k; + + if (!mem_size) { + printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); + mem_size = 128 * MB; + } + + /* + * this hardcodes the graphics memory to 8 MB + * it really should be sized dynamically (or at least + * set as a boot param) + */ + if (!sgivwfb_mem_size) { + printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); + sgivwfb_mem_size = 8 * MB; + } + + /* + * Trim to nearest MB + */ + sgivwfb_mem_size &= ~((1 << 20) - 1); + sgivwfb_mem_phys = mem_size - gfx_mem_size; + + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); + e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); + + return "PROM"; +} + +static void visws_machine_emergency_restart(void) +{ + /* + * Visual Workstations restart after this + * register is poked on the PIIX4 + */ + outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT); +} + +static void visws_machine_power_off(void) +{ + unsigned short pm_status; +/* extern unsigned int pci_bus0; */ + + while ((pm_status = inw(PMSTS_PORT)) & 0x100) + outw(pm_status, PMSTS_PORT); + + outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT); + + mdelay(10); + +#define PCI_CONF1_ADDRESS(bus, devfn, reg) \ + (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + +/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */ + outl(PIIX_SPECIAL_STOP, 0xCFC); +} + +static int __init visws_get_smp_config(unsigned int early) +{ + /* + * Prevent MP-table parsing by the generic code: + */ + return 1; +} + +/* + * The Visual Workstation is Intel MP compliant in the hardware + * sense, but it doesn't have a BIOS(-configuration table). + * No problem for Linux. + */ + +static void __init MP_processor_info(struct mpc_config_processor *m) +{ + int ver, logical_apicid; + physid_mask_t apic_cpus; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) + return; + + logical_apicid = m->mpc_apicid; + printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n", + m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver); + + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) + boot_cpu_physical_apicid = m->mpc_apicid; + + ver = m->mpc_apicver; + if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) { + printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", + m->mpc_apicid, MAX_APICS); + return; + } + + apic_cpus = apicid_to_cpu_present(m->mpc_apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus); + /* + * Validate version + */ + if (ver == 0x0) { + printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); + ver = 0x10; + } + apic_version[m->mpc_apicid] = ver; +} + +static int __init visws_find_smp_config(unsigned int reserve) +{ + struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS); + unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS)); + + if (ncpus > CO_CPU_MAX) { + printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n", + ncpus, mp); + + ncpus = CO_CPU_MAX; + } + + if (ncpus > setup_max_cpus) + ncpus = setup_max_cpus; + +#ifdef CONFIG_X86_LOCAL_APIC + smp_found_config = 1; +#endif + while (ncpus--) + MP_processor_info(mp++); + + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + return 1; +} + +static int visws_trap_init(void); + +static struct x86_quirks visws_x86_quirks __initdata = { + .arch_time_init = visws_time_init, + .arch_pre_intr_init = visws_pre_intr_init, + .arch_memory_setup = visws_memory_setup, + .arch_intr_init = NULL, + .arch_trap_init = visws_trap_init, + .mach_get_smp_config = visws_get_smp_config, + .mach_find_smp_config = visws_find_smp_config, +}; + +void __init visws_early_detect(void) +{ + int raw; + + visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG) + >> PIIX_GPI_BD_SHIFT; + + if (visws_board_type < 0) + return; + + /* + * Install special quirks for timer, interrupt and memory setup: + * Fall back to generic behavior for traps: + * Override generic MP-table parsing: + */ + x86_quirks = &visws_x86_quirks; + + /* + * Install reboot quirks: + */ + pm_power_off = visws_machine_power_off; + machine_ops.emergency_restart = visws_machine_emergency_restart; + + /* + * Do not use broadcast IPIs: + */ + no_broadcast = 0; + +#ifdef CONFIG_X86_IO_APIC + /* + * Turn off IO-APIC detection and initialization: + */ + skip_ioapic_setup = 1; +#endif + + /* + * Get Board rev. + * First, we have to initialize the 307 part to allow us access + * to the GPIO registers. Let's map them at 0x0fc0 which is right + * after the PIIX4 PM section. + */ + outb_p(SIO_DEV_SEL, SIO_INDEX); + outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */ + + outb_p(SIO_DEV_MSB, SIO_INDEX); + outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */ + + outb_p(SIO_DEV_LSB, SIO_INDEX); + outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */ + + outb_p(SIO_DEV_ENB, SIO_INDEX); + outb_p(1, SIO_DATA); /* Enable GPIO registers. */ + + /* + * Now, we have to map the power management section to write + * a bit which enables access to the GPIO registers. + * What lunatic came up with this shit? + */ + outb_p(SIO_DEV_SEL, SIO_INDEX); + outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */ + + outb_p(SIO_DEV_MSB, SIO_INDEX); + outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */ + + outb_p(SIO_DEV_LSB, SIO_INDEX); + outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */ + + outb_p(SIO_DEV_ENB, SIO_INDEX); + outb_p(1, SIO_DATA); /* Enable PM registers. */ + + /* + * Now, write the PM register which enables the GPIO registers. + */ + outb_p(SIO_PM_FER2, SIO_PM_INDEX); + outb_p(SIO_PM_GP_EN, SIO_PM_DATA); + + /* + * Now, initialize the GPIO registers. + * We want them all to be inputs which is the + * power on default, so let's leave them alone. + * So, let's just read the board rev! + */ + raw = inb_p(SIO_GP_DATA1); + raw &= 0x7f; /* 7 bits of valid board revision ID. */ + + if (visws_board_type == VISWS_320) { + if (raw < 0x6) { + visws_board_rev = 4; + } else if (raw < 0xc) { + visws_board_rev = 5; + } else { + visws_board_rev = 6; + } + } else if (visws_board_type == VISWS_540) { + visws_board_rev = 2; + } else { + visws_board_rev = raw; + } + + printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n", + (visws_board_type == VISWS_320 ? "320" : + (visws_board_type == VISWS_540 ? "540" : + "unknown")), visws_board_rev); +} + +#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4) +#define BCD (LI_INTB | LI_INTC | LI_INTD) +#define ALLDEVS (A01234 | BCD) + +static __init void lithium_init(void) +{ + set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS); + set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS); + + if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || + (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { + printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A'); +/* panic("This machine is not SGI Visual Workstation 320/540"); */ + } + + if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || + (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { + printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B'); +/* panic("This machine is not SGI Visual Workstation 320/540"); */ + } + + li_pcia_write16(LI_PCI_INTEN, ALLDEVS); + li_pcib_write16(LI_PCI_INTEN, ALLDEVS); +} + +static __init void cobalt_init(void) +{ + /* + * On normal SMP PC this is used only with SMP, but we have to + * use it and set it up here to start the Cobalt clock + */ + set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE); + setup_local_APIC(); + printk(KERN_INFO "Local APIC Version %#x, ID %#x\n", + (unsigned int)apic_read(APIC_LVR), + (unsigned int)apic_read(APIC_ID)); + + set_fixmap(FIX_CO_CPU, CO_CPU_PHYS); + set_fixmap(FIX_CO_APIC, CO_APIC_PHYS); + printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n", + co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID)); + + /* Enable Cobalt APIC being careful to NOT change the ID! */ + co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE); + + printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n", + co_apic_read(CO_APIC_ID)); +} + +static int __init visws_trap_init(void) +{ + lithium_init(); + cobalt_init(); + + return 1; +} + +/* + * IRQ controller / APIC support: + */ + +static DEFINE_SPINLOCK(cobalt_lock); + +/* + * Set the given Cobalt APIC Redirection Table entry to point + * to the given IDT vector/index. + */ +static inline void co_apic_set(int entry, int irq) +{ + co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR)); + co_apic_write(CO_APIC_HI(entry), 0); +} + +/* + * Cobalt (IO)-APIC functions to handle PCI devices. + */ +static inline int co_apic_ide0_hack(void) +{ + extern char visws_board_type; + extern char visws_board_rev; + + if (visws_board_type == VISWS_320 && visws_board_rev == 5) + return 5; + return CO_APIC_IDE0; +} + +static int is_co_apic(unsigned int irq) +{ + if (IS_CO_APIC(irq)) + return CO_APIC(irq); + + switch (irq) { + case 0: return CO_APIC_CPU; + case CO_IRQ_IDE0: return co_apic_ide0_hack(); + case CO_IRQ_IDE1: return CO_APIC_IDE1; + default: return -1; + } +} + + +/* + * This is the SGI Cobalt (IO-)APIC: + */ + +static void enable_cobalt_irq(unsigned int irq) +{ + co_apic_set(is_co_apic(irq), irq); +} + +static void disable_cobalt_irq(unsigned int irq) +{ + int entry = is_co_apic(irq); + + co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK); + co_apic_read(CO_APIC_LO(entry)); +} + +/* + * "irq" really just serves to identify the device. Here is where we + * map this to the Cobalt APIC entry where it's physically wired. + * This is called via request_irq -> setup_irq -> irq_desc->startup() + */ +static unsigned int startup_cobalt_irq(unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&cobalt_lock, flags); + if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING))) + irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING); + enable_cobalt_irq(irq); + spin_unlock_irqrestore(&cobalt_lock, flags); + return 0; +} + +static void ack_cobalt_irq(unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&cobalt_lock, flags); + disable_cobalt_irq(irq); + apic_write(APIC_EOI, APIC_EIO_ACK); + spin_unlock_irqrestore(&cobalt_lock, flags); +} + +static void end_cobalt_irq(unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&cobalt_lock, flags); + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_cobalt_irq(irq); + spin_unlock_irqrestore(&cobalt_lock, flags); +} + +static struct irq_chip cobalt_irq_type = { + .typename = "Cobalt-APIC", + .startup = startup_cobalt_irq, + .shutdown = disable_cobalt_irq, + .enable = enable_cobalt_irq, + .disable = disable_cobalt_irq, + .ack = ack_cobalt_irq, + .end = end_cobalt_irq, +}; + + +/* + * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt + * -- not the manner expected by the code in i8259.c. + * + * there is a 'master' physical interrupt source that gets sent to + * the CPU. But in the chipset there are various 'virtual' interrupts + * waiting to be handled. We represent this to Linux through a 'master' + * interrupt controller type, and through a special virtual interrupt- + * controller. Device drivers only see the virtual interrupt sources. + */ +static unsigned int startup_piix4_master_irq(unsigned int irq) +{ + init_8259A(0); + + return startup_cobalt_irq(irq); +} + +static void end_piix4_master_irq(unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&cobalt_lock, flags); + enable_cobalt_irq(irq); + spin_unlock_irqrestore(&cobalt_lock, flags); +} + +static struct irq_chip piix4_master_irq_type = { + .typename = "PIIX4-master", + .startup = startup_piix4_master_irq, + .ack = ack_cobalt_irq, + .end = end_piix4_master_irq, +}; + + +static struct irq_chip piix4_virtual_irq_type = { + .typename = "PIIX4-virtual", + .shutdown = disable_8259A_irq, + .enable = enable_8259A_irq, + .disable = disable_8259A_irq, +}; + + +/* + * PIIX4-8259 master/virtual functions to handle interrupt requests + * from legacy devices: floppy, parallel, serial, rtc. + * + * None of these get Cobalt APIC entries, neither do they have IDT + * entries. These interrupts are purely virtual and distributed from + * the 'master' interrupt source: CO_IRQ_8259. + * + * When the 8259 interrupts its handler figures out which of these + * devices is interrupting and dispatches to its handler. + * + * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/ + * enable_irq gets the right irq. This 'master' irq is never directly + * manipulated by any driver. + */ +static irqreturn_t piix4_master_intr(int irq, void *dev_id) +{ + int realirq; + irq_desc_t *desc; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + /* Find out what's interrupting in the PIIX4 master 8259 */ + outb(0x0c, 0x20); /* OCW3 Poll command */ + realirq = inb(0x20); + + /* + * Bit 7 == 0 means invalid/spurious + */ + if (unlikely(!(realirq & 0x80))) + goto out_unlock; + + realirq &= 7; + + if (unlikely(realirq == 2)) { + outb(0x0c, 0xa0); + realirq = inb(0xa0); + + if (unlikely(!(realirq & 0x80))) + goto out_unlock; + + realirq = (realirq & 7) + 8; + } + + /* mask and ack interrupt */ + cached_irq_mask |= 1 << realirq; + if (unlikely(realirq > 7)) { + inb(0xa1); + outb(cached_slave_mask, 0xa1); + outb(0x60 + (realirq & 7), 0xa0); + outb(0x60 + 2, 0x20); + } else { + inb(0x21); + outb(cached_master_mask, 0x21); + outb(0x60 + realirq, 0x20); + } + + spin_unlock_irqrestore(&i8259A_lock, flags); + + desc = irq_desc + realirq; + + /* + * handle this 'virtual interrupt' as a Cobalt one now. + */ + kstat_cpu(smp_processor_id()).irqs[realirq]++; + + if (likely(desc->action != NULL)) + handle_IRQ_event(realirq, desc->action); + + if (!(desc->status & IRQ_DISABLED)) + enable_8259A_irq(realirq); + + return IRQ_HANDLED; + +out_unlock: + spin_unlock_irqrestore(&i8259A_lock, flags); + return IRQ_NONE; +} + +static struct irqaction master_action = { + .handler = piix4_master_intr, + .name = "PIIX4-8259", +}; + +static struct irqaction cascade_action = { + .handler = no_action, + .name = "cascade", +}; + + +void init_VISWS_APIC_irqs(void) +{ + int i; + + for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + + if (i == 0) { + irq_desc[i].chip = &cobalt_irq_type; + } + else if (i == CO_IRQ_IDE0) { + irq_desc[i].chip = &cobalt_irq_type; + } + else if (i == CO_IRQ_IDE1) { + irq_desc[i].chip = &cobalt_irq_type; + } + else if (i == CO_IRQ_8259) { + irq_desc[i].chip = &piix4_master_irq_type; + } + else if (i < CO_IRQ_APIC0) { + irq_desc[i].chip = &piix4_virtual_irq_type; + } + else if (IS_CO_APIC(i)) { + irq_desc[i].chip = &cobalt_irq_type; + } + } + + setup_irq(CO_IRQ_8259, &master_action); + setup_irq(2, &cascade_action); +} diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c index 38f566fa27d..4eeb5cf9720 100644 --- a/arch/x86/kernel/vm86_32.c +++ b/arch/x86/kernel/vm86_32.c @@ -46,6 +46,7 @@ #include <asm/io.h> #include <asm/tlbflush.h> #include <asm/irq.h> +#include <asm/syscalls.h> /* * Known problems: diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 956f38927aa..8b6c393ab9f 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -37,6 +37,7 @@ #include <asm/timer.h> #include <asm/vmi_time.h> #include <asm/kmap_types.h> +#include <asm/setup.h> /* Convenient for calling VMI functions indirectly in the ROM */ typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); @@ -151,7 +152,7 @@ static unsigned vmi_patch(u8 type, u16 clobbers, void *insns, insns, ip); case PARAVIRT_PATCH(pv_cpu_ops.iret): return patch_internal(VMI_CALL_IRET, len, insns, ip); - case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret): + case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit): return patch_internal(VMI_CALL_SYSEXIT, len, insns, ip); default: break; @@ -234,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry, const void *desc) { u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); + vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); } static void vmi_load_sp0(struct tss_struct *tss, @@ -392,13 +393,13 @@ static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type) } #endif -static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn) +static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn) { vmi_set_page_type(pfn, VMI_PAGE_L1); vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); } -static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn) +static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn) { /* * This call comes in very early, before mem_map is setup. @@ -409,20 +410,20 @@ static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn) vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); } -static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count) { vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); vmi_check_page_type(clonepfn, VMI_PAGE_L2); vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); } -static void vmi_release_pte(u32 pfn) +static void vmi_release_pte(unsigned long pfn) { vmi_ops.release_page(pfn, VMI_PAGE_L1); vmi_set_page_type(pfn, VMI_PAGE_NORMAL); } -static void vmi_release_pmd(u32 pfn) +static void vmi_release_pmd(unsigned long pfn) { vmi_ops.release_page(pfn, VMI_PAGE_L2); vmi_set_page_type(pfn, VMI_PAGE_NORMAL); @@ -683,7 +684,7 @@ void vmi_bringup(void) { /* We must establish the lowmem mapping for MMU ops to work */ if (vmi_ops.set_linear_mapping) - vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0); + vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0); } /* @@ -896,7 +897,7 @@ static inline int __init activate_vmi(void) * the backend. They are performance critical anyway, so requiring * a patch is not a big problem. */ - pv_cpu_ops.irq_enable_syscall_ret = (void *)0xfeedbab0; + pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0; pv_cpu_ops.iret = (void *)0xbadbab0; #ifdef CONFIG_SMP @@ -904,9 +905,8 @@ static inline int __init activate_vmi(void) #endif #ifdef CONFIG_X86_LOCAL_APIC - para_fill(pv_apic_ops.apic_read, APICRead); - para_fill(pv_apic_ops.apic_write, APICWrite); - para_fill(pv_apic_ops.apic_write_atomic, APICWrite); + para_fill(apic_ops->read, APICRead); + para_fill(apic_ops->write, APICWrite); #endif /* @@ -932,7 +932,7 @@ static inline int __init activate_vmi(void) pv_apic_ops.setup_secondary_clock = vmi_time_ap_init; #endif pv_time_ops.sched_clock = vmi_sched_clock; - pv_time_ops.get_cpu_khz = vmi_cpu_khz; + pv_time_ops.get_tsc_khz = vmi_tsc_khz; /* We have true wallclock functions; disable CMOS clock sync */ no_sync_cmos_clock = 1; diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index a2b030780aa..6953859fe28 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -33,8 +33,7 @@ #include <asm/apic.h> #include <asm/timer.h> #include <asm/i8253.h> - -#include <irq_vectors.h> +#include <asm/irq_vectors.h> #define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) #define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) @@ -70,8 +69,8 @@ unsigned long long vmi_sched_clock(void) return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE)); } -/* paravirt_ops.get_cpu_khz = vmi_cpu_khz */ -unsigned long vmi_cpu_khz(void) +/* paravirt_ops.get_tsc_khz = vmi_tsc_khz */ +unsigned long vmi_tsc_khz(void) { unsigned long long khz; khz = vmi_timer_ops.get_cycle_frequency(); diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e..a9b8560adbc 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -49,23 +49,14 @@ SECTIONS _etext = .; /* End of text section */ } :text = 0x9090 + NOTES :text :note + . = ALIGN(16); /* Exception table */ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } - - NOTES :text :note - - BUG_TABLE :text - - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } + } :text = 0x9090 RODATA @@ -149,10 +140,10 @@ SECTIONS *(.con_initcall.init) __con_initcall_end = .; } - .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { - __x86cpuvendor_start = .; - *(.x86cpuvendor.init) - __x86cpuvendor_end = .; + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + __x86_cpu_dev_start = .; + *(.x86_cpu_dev.init) + __x86_cpu_dev_end = .; } SECURITY_INIT . = ALIGN(4); @@ -189,6 +180,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; + *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; @@ -218,3 +210,11 @@ SECTIONS DWARF_DEBUG } + +#ifdef CONFIG_KEXEC +/* Link time checks */ +#include <asm/kexec.h> + +ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big") +#endif diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a..46e05447405 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -19,7 +19,7 @@ PHDRS { data PT_LOAD FLAGS(7); /* RWE */ user PT_LOAD FLAGS(7); /* RWE */ data.init PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(4); /* R__ */ + note PT_NOTE FLAGS(0); /* ___ */ } SECTIONS { @@ -40,26 +40,17 @@ SECTIONS _etext = .; /* End of text section */ } :text = 0x9090 + NOTES :text :note + . = ALIGN(16); /* Exception table */ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } - - NOTES :text :note - - BUG_TABLE :text + } :text = 0x9090 RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { @@ -177,11 +168,11 @@ SECTIONS *(.con_initcall.init) } __con_initcall_end = .; - __x86cpuvendor_start = .; - .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { - *(.x86cpuvendor.init) + __x86_cpu_dev_start = .; + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + *(.x86_cpu_dev.init) } - __x86cpuvendor_end = .; + __x86_cpu_dev_end = .; SECURITY_INIT . = ALIGN(8); diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b75ab0..7766d36983f 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include <linux/init.h> #include <linux/pci_ids.h> #include <linux/pci_regs.h> + +#include <asm/apic.h> #include <asm/pci-direct.h> #include <asm/io.h> #include <asm/paravirt.h> +#include <asm/setup.h> #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* @@ -58,7 +61,7 @@ static void vsmp_irq_enable(void) native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC)); } -static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf, +static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf, unsigned long addr, unsigned len) { switch (type) { diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 61efa2f7d56..0b8b6690a86 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -42,7 +42,8 @@ #include <asm/topology.h> #include <asm/vgtod.h> -#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) +#define __vsyscall(nr) \ + __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace #define __syscall_clobber "r11","cx","memory" /* @@ -249,7 +250,7 @@ static ctl_table kernel_root_table2[] = { doesn't violate that. We'll find out if it does. */ static void __cpuinit vsyscall_set_cpu(int cpu) { - unsigned long *d; + unsigned long d; unsigned long node = 0; #ifdef CONFIG_NUMA node = cpu_to_node(cpu); @@ -260,11 +261,11 @@ static void __cpuinit vsyscall_set_cpu(int cpu) /* Store cpu number in limit so that it can be loaded quickly in user space in vgetcpu. 12 bits for the CPU and 8 bits for the node. */ - d = (unsigned long *)(get_cpu_gdt_table(cpu) + GDT_ENTRY_PER_CPU); - *d = 0x0f40000000000ULL; - *d |= cpu; - *d |= (node & 0xf) << 12; - *d |= (node >> 4) << 48; + d = 0x0f40000000000ULL; + d |= cpu; + d |= (node & 0xf) << 12; + d |= (node >> 4) << 48; + write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S); } static void __cpuinit cpu_vsyscall_init(void *arg) @@ -278,7 +279,7 @@ cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) { long cpu = (long)arg; if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) - smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1); + smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1); return NOTIFY_DONE; } @@ -301,7 +302,7 @@ static int __init vsyscall_init(void) #ifdef CONFIG_SYSCTL register_sysctl_table(kernel_root_table2); #endif - on_each_cpu(cpu_vsyscall_init, NULL, 0, 1); + on_each_cpu(cpu_vsyscall_init, NULL, 1); hotcpu_notifier(cpu_vsyscall_notifier, 0); return 0; } diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c index f6c05d0410f..b545f371b5f 100644 --- a/arch/x86/kernel/x8664_ksyms_64.c +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -2,13 +2,20 @@ All C exports should go in the respective C files. */ #include <linux/module.h> -#include <net/checksum.h> #include <linux/smp.h> +#include <net/checksum.h> + #include <asm/processor.h> -#include <asm/uaccess.h> #include <asm/pgtable.h> +#include <asm/uaccess.h> #include <asm/desc.h> +#include <asm/ftrace.h> + +#ifdef CONFIG_FTRACE +/* mcount is defined in assembly */ +EXPORT_SYMBOL(mcount); +#endif EXPORT_SYMBOL(kernel_thread); @@ -53,8 +60,3 @@ EXPORT_SYMBOL(init_level4_pgt); EXPORT_SYMBOL(load_gs_index); EXPORT_SYMBOL(_proxy_pda); - -#ifdef CONFIG_PARAVIRT -/* Virtualized guests may want to use it */ -EXPORT_SYMBOL_GPL(cpu_gdt_descr); -#endif diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c new file mode 100644 index 00000000000..9abac8a9d82 --- /dev/null +++ b/arch/x86/kernel/xsave.c @@ -0,0 +1,345 @@ +/* + * xsave/xrstor support. + * + * Author: Suresh Siddha <suresh.b.siddha@intel.com> + */ +#include <linux/bootmem.h> +#include <linux/compat.h> +#include <asm/i387.h> +#ifdef CONFIG_IA32_EMULATION +#include <asm/sigcontext32.h> +#endif +#include <asm/xcr.h> + +/* + * Supported feature mask by the CPU and the kernel. + */ +u64 pcntxt_mask; + +struct _fpx_sw_bytes fx_sw_reserved; +#ifdef CONFIG_IA32_EMULATION +struct _fpx_sw_bytes fx_sw_reserved_ia32; +#endif + +/* + * Check for the presence of extended state information in the + * user fpstate pointer in the sigcontext. + */ +int check_for_xstate(struct i387_fxsave_struct __user *buf, + void __user *fpstate, + struct _fpx_sw_bytes *fx_sw_user) +{ + int min_xstate_size = sizeof(struct i387_fxsave_struct) + + sizeof(struct xsave_hdr_struct); + unsigned int magic2; + int err; + + err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0], + sizeof(struct _fpx_sw_bytes)); + + if (err) + return err; + + /* + * First Magic check failed. + */ + if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1) + return -1; + + /* + * Check for error scenarios. + */ + if (fx_sw_user->xstate_size < min_xstate_size || + fx_sw_user->xstate_size > xstate_size || + fx_sw_user->xstate_size > fx_sw_user->extended_size) + return -1; + + err = __get_user(magic2, (__u32 *) (((void *)fpstate) + + fx_sw_user->extended_size - + FP_XSTATE_MAGIC2_SIZE)); + /* + * Check for the presence of second magic word at the end of memory + * layout. This detects the case where the user just copied the legacy + * fpstate layout with out copying the extended state information + * in the memory layout. + */ + if (err || magic2 != FP_XSTATE_MAGIC2) + return -1; + + return 0; +} + +#ifdef CONFIG_X86_64 +/* + * Signal frame handlers. + */ + +int save_i387_xstate(void __user *buf) +{ + struct task_struct *tsk = current; + int err = 0; + + if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size)) + return -EACCES; + + BUG_ON(sig_xstate_size < xstate_size); + + if ((unsigned long)buf % 64) + printk("save_i387_xstate: bad fpstate %p\n", buf); + + if (!used_math()) + return 0; + clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_USEDFPU) { + /* + * Start with clearing the user buffer. This will present a + * clean context for the bytes not touched by the fxsave/xsave. + */ + err = __clear_user(buf, sig_xstate_size); + if (err) + return err; + + if (task_thread_info(tsk)->status & TS_XSAVE) + err = xsave_user(buf); + else + err = fxsave_user(buf); + + if (err) + return err; + task_thread_info(tsk)->status &= ~TS_USEDFPU; + stts(); + } else { + if (__copy_to_user(buf, &tsk->thread.xstate->fxsave, + xstate_size)) + return -1; + } + + if (task_thread_info(tsk)->status & TS_XSAVE) { + struct _fpstate __user *fx = buf; + struct _xstate __user *x = buf; + u64 xstate_bv; + + err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved, + sizeof(struct _fpx_sw_bytes)); + + err |= __put_user(FP_XSTATE_MAGIC2, + (__u32 __user *) (buf + sig_xstate_size + - FP_XSTATE_MAGIC2_SIZE)); + + /* + * Read the xstate_bv which we copied (directly from the cpu or + * from the state in task struct) to the user buffers and + * set the FP/SSE bits. + */ + err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv); + + /* + * For legacy compatible, we always set FP/SSE bits in the bit + * vector while saving the state to the user context. This will + * enable us capturing any changes(during sigreturn) to + * the FP/SSE bits by the legacy applications which don't touch + * xstate_bv in the xsave header. + * + * xsave aware apps can change the xstate_bv in the xsave + * header as well as change any contents in the memory layout. + * xrestore as part of sigreturn will capture all the changes. + */ + xstate_bv |= XSTATE_FPSSE; + + err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv); + + if (err) + return err; + } + + return 1; +} + +/* + * Restore the extended state if present. Otherwise, restore the FP/SSE + * state. + */ +int restore_user_xstate(void __user *buf) +{ + struct _fpx_sw_bytes fx_sw_user; + u64 mask; + int err; + + if (((unsigned long)buf % 64) || + check_for_xstate(buf, buf, &fx_sw_user)) + goto fx_only; + + mask = fx_sw_user.xstate_bv; + + /* + * restore the state passed by the user. + */ + err = xrestore_user(buf, mask); + if (err) + return err; + + /* + * init the state skipped by the user. + */ + mask = pcntxt_mask & ~mask; + + xrstor_state(init_xstate_buf, mask); + + return 0; + +fx_only: + /* + * couldn't find the extended state information in the + * memory layout. Restore just the FP/SSE and init all + * the other extended state. + */ + xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE); + return fxrstor_checking((__force struct i387_fxsave_struct *)buf); +} + +/* + * This restores directly out of user space. Exceptions are handled. + */ +int restore_i387_xstate(void __user *buf) +{ + struct task_struct *tsk = current; + int err = 0; + + if (!buf) { + if (used_math()) + goto clear; + return 0; + } else + if (!access_ok(VERIFY_READ, buf, sig_xstate_size)) + return -EACCES; + + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + + if (!(task_thread_info(current)->status & TS_USEDFPU)) { + clts(); + task_thread_info(current)->status |= TS_USEDFPU; + } + if (task_thread_info(tsk)->status & TS_XSAVE) + err = restore_user_xstate(buf); + else + err = fxrstor_checking((__force struct i387_fxsave_struct *) + buf); + if (unlikely(err)) { + /* + * Encountered an error while doing the restore from the + * user buffer, clear the fpu state. + */ +clear: + clear_fpu(tsk); + clear_used_math(); + } + return err; +} +#endif + +/* + * Prepare the SW reserved portion of the fxsave memory layout, indicating + * the presence of the extended state information in the memory layout + * pointed by the fpstate pointer in the sigcontext. + * This will be saved when ever the FP and extended state context is + * saved on the user stack during the signal handler delivery to the user. + */ +void prepare_fx_sw_frame(void) +{ + int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) + + FP_XSTATE_MAGIC2_SIZE; + + sig_xstate_size = sizeof(struct _fpstate) + size_extended; + +#ifdef CONFIG_IA32_EMULATION + sig_xstate_ia32_size = sizeof(struct _fpstate_ia32) + size_extended; +#endif + + memset(&fx_sw_reserved, 0, sizeof(fx_sw_reserved)); + + fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1; + fx_sw_reserved.extended_size = sig_xstate_size; + fx_sw_reserved.xstate_bv = pcntxt_mask; + fx_sw_reserved.xstate_size = xstate_size; +#ifdef CONFIG_IA32_EMULATION + memcpy(&fx_sw_reserved_ia32, &fx_sw_reserved, + sizeof(struct _fpx_sw_bytes)); + fx_sw_reserved_ia32.extended_size = sig_xstate_ia32_size; +#endif +} + +/* + * Represents init state for the supported extended state. + */ +struct xsave_struct *init_xstate_buf; + +#ifdef CONFIG_X86_64 +unsigned int sig_xstate_size = sizeof(struct _fpstate); +#endif + +/* + * Enable the extended processor state save/restore feature + */ +void __cpuinit xsave_init(void) +{ + if (!cpu_has_xsave) + return; + + set_in_cr4(X86_CR4_OSXSAVE); + + /* + * Enable all the features that the HW is capable of + * and the Linux kernel is aware of. + */ + xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask); +} + +/* + * setup the xstate image representing the init state + */ +static void __init setup_xstate_init(void) +{ + init_xstate_buf = alloc_bootmem(xstate_size); + init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; +} + +/* + * Enable and initialize the xsave feature. + */ +void __init xsave_cntxt_init(void) +{ + unsigned int eax, ebx, ecx, edx; + + cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx); + pcntxt_mask = eax + ((u64)edx << 32); + + if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) { + printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n", + pcntxt_mask); + BUG(); + } + + /* + * for now OS knows only about FP/SSE + */ + pcntxt_mask = pcntxt_mask & XCNTXT_MASK; + xsave_init(); + + /* + * Recompute the context size for enabled features + */ + cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx); + xstate_size = ebx; + + prepare_fx_sw_frame(); + + setup_xstate_init(); + + printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, " + "cntxt size 0x%x\n", + pcntxt_mask, xstate_size); +} |