diff options
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r-- | arch/x86/kernel/Makefile | 2 | ||||
-rw-r--r-- | arch/x86/kernel/acpi/boot.c | 70 | ||||
-rw-r--r-- | arch/x86/kernel/mmconf-fam10h_64.c | 243 | ||||
-rw-r--r-- | arch/x86/kernel/setup_64.c | 20 |
4 files changed, 335 insertions, 0 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 350eb1b2a20..30d54ed27e5 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -103,4 +103,6 @@ ifeq ($(CONFIG_X86_64),y) obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o + + obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o endif diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 977ed5cdeaa..c49ebcc6c41 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -771,6 +771,32 @@ static void __init acpi_register_lapic_address(unsigned long address) boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); } +static int __init early_acpi_parse_madt_lapic_addr_ovr(void) +{ + int count; + + if (!cpu_has_apic) + return -ENODEV; + + /* + * Note that the LAPIC address is obtained from the MADT (32-bit value) + * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). + */ + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, + acpi_parse_lapic_addr_ovr, 0); + if (count < 0) { + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); + return count; + } + + acpi_register_lapic_address(acpi_lapic_addr); + + return count; +} + static int __init acpi_parse_madt_lapic_entries(void) { int count; @@ -901,6 +927,33 @@ static inline int acpi_parse_madt_ioapic_entries(void) } #endif /* !CONFIG_X86_IO_APIC */ +static void __init early_acpi_process_madt(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + int error; + + if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + + /* + * Parse MADT LAPIC entries + */ + error = early_acpi_parse_madt_lapic_addr_ovr(); + if (!error) { + acpi_lapic = 1; + smp_found_config = 1; + } + if (error == -EINVAL) { + /* + * Dell Precision Workstation 410, 610 come here. + */ + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); + disable_acpi(); + } + } +#endif +} + static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC @@ -1233,6 +1286,23 @@ int __init acpi_boot_table_init(void) return 0; } +int __init early_acpi_boot_init(void) +{ + /* + * If acpi_disabled, bail out + * One exception: acpi=ht continues far enough to enumerate LAPICs + */ + if (acpi_disabled && !acpi_ht) + return 1; + + /* + * Process the Multiple APIC Description Table (MADT), if present + */ + early_acpi_process_madt(); + + return 0; +} + int __init acpi_boot_init(void) { /* diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c new file mode 100644 index 00000000000..edc5fbfe85c --- /dev/null +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -0,0 +1,243 @@ +/* + * AMD Family 10h mmconfig enablement + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/dmi.h> +#include <asm/pci-direct.h> +#include <linux/sort.h> +#include <asm/io.h> +#include <asm/msr.h> +#include <asm/acpi.h> + +#include "../pci/pci.h" + +struct pci_hostbridge_probe { + u32 bus; + u32 slot; + u32 vendor; + u32 device; +}; + +static u64 __cpuinitdata fam10h_pci_mmconf_base; +static int __cpuinitdata fam10h_pci_mmconf_base_status; + +static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, +}; + +struct range { + u64 start; + u64 end; +}; + +static int __cpuinit cmp_range(const void *x1, const void *x2) +{ + const struct range *r1 = x1; + const struct range *r2 = x2; + int start1, start2; + + start1 = r1->start >> 32; + start2 = r2->start >> 32; + + return start1 - start2; +} + +/*[47:0] */ +/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ +#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) +#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) +static void __cpuinit get_fam10h_pci_mmconf_base(void) +{ + int i; + unsigned bus; + unsigned slot; + int found; + + u64 val; + u32 address; + u64 tom2; + u64 base = FAM10H_PCI_MMCONF_BASE; + + int hi_mmio_num; + struct range range[8]; + + /* only try to get setting from BSP */ + /* -1 or 1 */ + if (fam10h_pci_mmconf_base_status) + return; + + if (!early_pci_allowed()) + goto fail; + + found = 0; + for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + u32 id; + u16 device; + u16 vendor; + + bus = pci_probes[i].bus; + slot = pci_probes[i].slot; + id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); + + vendor = id & 0xffff; + device = (id>>16) & 0xffff; + if (pci_probes[i].vendor == vendor && + pci_probes[i].device == device) { + found = 1; + break; + } + } + + if (!found) + goto fail; + + /* SYS_CFG */ + address = MSR_K8_SYSCFG; + rdmsrl(address, val); + + /* TOP_MEM2 is not enabled? */ + if (!(val & (1<<21))) { + tom2 = 0; + } else { + /* TOP_MEM2 */ + address = MSR_K8_TOP_MEM2; + rdmsrl(address, val); + tom2 = val & (0xffffULL<<32); + } + + if (base <= tom2) + base = tom2 + (1ULL<<32); + + /* + * need to check if the range is in the high mmio range that is + * above 4G + */ + hi_mmio_num = 0; + for (i = 0; i < 8; i++) { + u32 reg; + u64 start; + u64 end; + reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); + if (!(reg & 3)) + continue; + + start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); + end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + + if (!end) + continue; + + range[hi_mmio_num].start = start; + range[hi_mmio_num].end = end; + hi_mmio_num++; + } + + if (!hi_mmio_num) + goto out; + + /* sort the range */ + sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL); + + if (range[hi_mmio_num - 1].end < base) + goto out; + if (range[0].start > base) + goto out; + + /* need to find one window */ + base = range[0].start - (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + base = range[hi_mmio_num - 1].end + (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + /* need to find window between ranges */ + if (hi_mmio_num > 1) + for (i = 0; i < hi_mmio_num - 1; i++) { + if (range[i + 1].start > (range[i].end + (1ULL << 32))) { + base = range[i].end + (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + } + } + +fail: + fam10h_pci_mmconf_base_status = -1; + return; +out: + fam10h_pci_mmconf_base = base; + fam10h_pci_mmconf_base_status = 1; +} + +void __cpuinit fam10h_check_enable_mmcfg(void) +{ + u64 val; + u32 address; + + if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) + return; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, val); + + /* try to make sure that AP's setting is identical to BSP setting */ + if (val & FAM10H_MMIO_CONF_ENABLE) { + unsigned busnbits; + busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + /* only trust the one handle 256 buses, if acpi=off */ + if (!acpi_pci_disabled || busnbits >= 8) { + u64 base; + base = val & (0xffffULL << 32); + if (fam10h_pci_mmconf_base_status <= 0) { + fam10h_pci_mmconf_base = base; + fam10h_pci_mmconf_base_status = 1; + return; + } else if (fam10h_pci_mmconf_base == base) + return; + } + } + + /* + * if it is not enabled, try to enable it and assume only one segment + * with 256 buses + */ + get_fam10h_pci_mmconf_base(); + if (fam10h_pci_mmconf_base_status <= 0) + return; + + printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); + val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) | + (FAM10H_MMIO_CONF_BUSRANGE_MASK<<FAM10H_MMIO_CONF_BUSRANGE_SHIFT)); + val |= fam10h_pci_mmconf_base | (8 << FAM10H_MMIO_CONF_BUSRANGE_SHIFT) | + FAM10H_MMIO_CONF_ENABLE; + wrmsrl(address, val); +} + +static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d) +{ + pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; + return 0; +} + +static struct dmi_system_id __devinitdata mmconf_dmi_table[] = { + { + .callback = set_check_enable_amd_mmconf, + .ident = "Sun Microsystems Machine", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"), + }, + }, + {} +}; + +void __init check_enable_amd_mmconf_dmi(void) +{ + dmi_check_system(mmconf_dmi_table); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index a94fb959a87..22c14e21c97 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -29,6 +29,7 @@ #include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/pci.h> +#include <asm/pci-direct.h> #include <linux/efi.h> #include <linux/acpi.h> #include <linux/kallsyms.h> @@ -40,6 +41,7 @@ #include <linux/dmi.h> #include <linux/dma-mapping.h> #include <linux/ctype.h> +#include <linux/sort.h> #include <linux/uaccess.h> #include <linux/init_ohci1394_dma.h> #include <linux/kvm_para.h> @@ -288,6 +290,18 @@ static void __init parse_setup_data(void) } } +#ifdef CONFIG_PCI_MMCONFIG +extern void __cpuinit fam10h_check_enable_mmcfg(void); +extern void __init check_enable_amd_mmconf_dmi(void); +#else +void __cpuinit fam10h_check_enable_mmcfg(void) +{ +} +void __init check_enable_amd_mmconf_dmi(void) +{ +} +#endif + /* * setup_arch - architecture-specific boot-time initializations * @@ -515,6 +529,9 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + + /* do this before identify_cpu for boot cpu */ + check_enable_amd_mmconf_dmi(); } static int __cpuinit get_model_name(struct cpuinfo_x86 *c) @@ -767,6 +784,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) /* MFENCE stops RDTSC speculation */ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + if (amd_apic_timer_broken()) disable_apic_timer = 1; |