diff options
Diffstat (limited to 'arch/x86/lguest/boot.c')
| -rw-r--r-- | arch/x86/lguest/boot.c | 108 |
1 files changed, 62 insertions, 46 deletions
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a104c532ff7..3335b4595ef 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -10,21 +10,19 @@ * (such as the example in Documentation/lguest/lguest.c) is called the * Launcher. * - * Secondly, we only run specially modified Guests, not normal kernels. When - * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets - * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows - * how to be a Guest. This means that you can use the same kernel you boot - * normally (ie. as a Host) as a Guest. + * Secondly, we only run specially modified Guests, not normal kernels: setting + * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows + * how to be a Guest at boot time. This means that you can use the same kernel + * you boot normally (ie. as a Host) as a Guest. * * These Guests know that they cannot do privileged operations, such as disable * interrupts, and that they have to ask the Host to do such things explicitly. * This file consists of all the replacements for such low-level native * hardware operations: these special Guest versions call the Host. * - * So how does the kernel know it's a Guest? The Guest starts at a special - * entry point marked with a magic string, which sets up a few things then - * calls here. We replace the native functions various "paravirt" structures - * with our Guest versions, then boot like normal. :*/ + * So how does the kernel know it's a Guest? We'll see that later, but let's + * just say that we end up here where we replace the native functions various + * "paravirt" structures with our Guest versions, then boot like normal. :*/ /* * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation. @@ -134,7 +132,7 @@ static void async_hcall(unsigned long call, unsigned long arg1, * lguest_leave_lazy_mode(). * * So, when we're in lazy mode, we call async_hcall() to store the call for - * future processing. */ + * future processing: */ static void lazy_hcall(unsigned long call, unsigned long arg1, unsigned long arg2, @@ -147,7 +145,7 @@ static void lazy_hcall(unsigned long call, } /* When lazy mode is turned off reset the per-cpu lazy mode variable and then - * issue a hypercall to flush any stored calls. */ + * issue the do-nothing hypercall to flush any stored calls. */ static void lguest_leave_lazy_mode(void) { paravirt_leave_lazy(paravirt_get_lazy_mode()); @@ -164,7 +162,7 @@ static void lguest_leave_lazy_mode(void) * * So instead we keep an "irq_enabled" field inside our "struct lguest_data", * which the Guest can update with a single instruction. The Host knows to - * check there when it wants to deliver an interrupt. + * check there before it tries to deliver an interrupt. */ /* save_flags() is expected to return the processor state (ie. "flags"). The @@ -196,10 +194,15 @@ static void irq_enable(void) /*M:003 Note that we don't check for outstanding interrupts when we re-enable * them (or when we unmask an interrupt). This seems to work for the moment, * since interrupts are rare and we'll just get the interrupt on the next timer - * tick, but when we turn on CONFIG_NO_HZ, we should revisit this. One way + * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way * would be to put the "irq_enabled" field in a page by itself, and have the * Host write-protect it when an interrupt comes in when irqs are disabled. - * There will then be a page fault as soon as interrupts are re-enabled. :*/ + * There will then be a page fault as soon as interrupts are re-enabled. + * + * A better method is to implement soft interrupt disable generally for x86: + * instead of disabling interrupts, we set a flag. If an interrupt does come + * in, we then disable them for real. This is uncommon, so we could simply use + * a hypercall for interrupt control and not worry about efficiency. :*/ /*G:034 * The Interrupt Descriptor Table (IDT). @@ -212,6 +215,10 @@ static void irq_enable(void) static void lguest_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) { + /* The gate_desc structure is 8 bytes long: we hand it to the Host in + * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors + * around like this; typesafety wasn't a big concern in Linux's early + * years. */ u32 *desc = (u32 *)g; /* Keep the local copy up to date. */ native_write_idt_entry(dt, entrynum, g); @@ -243,7 +250,8 @@ static void lguest_load_idt(const struct desc_ptr *desc) * * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY * hypercall and use that repeatedly to load a new IDT. I don't think it - * really matters, but wouldn't it be nice if they were the same? + * really matters, but wouldn't it be nice if they were the same? Wouldn't + * it be even better if you were the one to send the patch to fix it? */ static void lguest_load_gdt(const struct desc_ptr *desc) { @@ -298,9 +306,9 @@ static void lguest_load_tr_desc(void) /* The "cpuid" instruction is a way of querying both the CPU identity * (manufacturer, model, etc) and its features. It was introduced before the - * Pentium in 1993 and keeps getting extended by both Intel and AMD. As you - * might imagine, after a decade and a half this treatment, it is now a giant - * ball of hair. Its entry in the current Intel manual runs to 28 pages. + * Pentium in 1993 and keeps getting extended by both Intel, AMD and others. + * As you might imagine, after a decade and a half this treatment, it is now a + * giant ball of hair. Its entry in the current Intel manual runs to 28 pages. * * This instruction even it has its own Wikipedia entry. The Wikipedia entry * has been translated into 4 languages. I am not making this up! @@ -594,17 +602,17 @@ static unsigned long lguest_get_wallclock(void) return lguest_data.time.tv_sec; } -/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at, - * or 0 if it's unusable as a reliable clock source. This matches what we want - * here: if we return 0 from this function, the x86 TSC clock will not register - * itself. */ +/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us + * what speed it runs at, or 0 if it's unusable as a reliable clock source. + * This matches what we want here: if we return 0 from this function, the x86 + * TSC clock will give up and not register itself. */ static unsigned long lguest_cpu_khz(void) { return lguest_data.tsc_khz; } -/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where - * we read the time value given to us by the Host. */ +/* If we can't use the TSC, the kernel falls back to our lower-priority + * "lguest_clock", where we read the time value given to us by the Host. */ static cycle_t lguest_clock_read(void) { unsigned long sec, nsec; @@ -648,12 +656,16 @@ static struct clocksource lguest_clock = { static int lguest_clockevent_set_next_event(unsigned long delta, struct clock_event_device *evt) { + /* FIXME: I don't think this can ever happen, but James tells me he had + * to put this code in. Maybe we should remove it now. Anyone? */ if (delta < LG_CLOCK_MIN_DELTA) { if (printk_ratelimit()) printk(KERN_DEBUG "%s: small delta %lu ns\n", __FUNCTION__, delta); return -ETIME; } + + /* Please wake us this far in the future. */ hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0); return 0; } @@ -738,7 +750,7 @@ static void lguest_time_init(void) * will not tolerate us trying to use that), the stack pointer, and the number * of pages in the stack. */ static void lguest_load_sp0(struct tss_struct *tss, - struct thread_struct *thread) + struct thread_struct *thread) { lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0, THREAD_SIZE/PAGE_SIZE); @@ -786,9 +798,8 @@ static void lguest_safe_halt(void) hcall(LHCALL_HALT, 0, 0, 0); } -/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a - * message out when we're crashing as well as elegant termination like powering - * off. +/* The SHUTDOWN hypercall takes a string to describe what's happening, and + * an argument which says whether this to restart (reboot) the Guest or not. * * Note that the Host always prefers that the Guest speak in physical addresses * rather than virtual addresses, so we use __pa() here. */ @@ -816,8 +827,9 @@ static struct notifier_block paniced = { /* Setting up memory is fairly easy. */ static __init char *lguest_memory_setup(void) { - /* We do this here and not earlier because lockcheck barfs if we do it - * before start_kernel() */ + /* We do this here and not earlier because lockcheck used to barf if we + * did it before start_kernel(). I think we fixed that, so it'd be + * nice to move it back to lguest_init. Patch welcome... */ atomic_notifier_chain_register(&panic_notifier_list, &paniced); /* The Linux bootloader header contains an "e820" memory map: the @@ -850,12 +862,19 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } +/* Rebooting also tells the Host we're finished, but the RESTART flag tells the + * Launcher to reboot us. */ +static void lguest_restart(char *reason) +{ + hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0); +} + /*G:050 * Patching (Powerfully Placating Performance Pedants) * - * We have already seen that pv_ops structures let us replace simple - * native instructions with calls to the appropriate back end all throughout - * the kernel. This allows the same kernel to run as a Guest and as a native + * We have already seen that pv_ops structures let us replace simple native + * instructions with calls to the appropriate back end all throughout the + * kernel. This allows the same kernel to run as a Guest and as a native * kernel, but it's slow because of all the indirect branches. * * Remember that David Wheeler quote about "Any problem in computer science can @@ -908,14 +927,9 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, return insn_len; } -static void lguest_restart(char *reason) -{ - hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0); -} - -/*G:030 Once we get to lguest_init(), we know we're a Guest. The pv_ops - * structures in the kernel provide points for (almost) every routine we have - * to override to avoid privileged instructions. */ +/*G:030 Once we get to lguest_init(), we know we're a Guest. The various + * pv_ops structures in the kernel provide points for (almost) every routine we + * have to override to avoid privileged instructions. */ __init void lguest_init(void) { /* We're under lguest, paravirt is enabled, and we're running at @@ -1003,9 +1017,9 @@ __init void lguest_init(void) * the normal data segment to get through booting. */ asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory"); - /* The Host uses the top of the Guest's virtual address space for the - * Host<->Guest Switcher, and it tells us how big that is in - * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */ + /* The Host<->Guest Switcher lives at the top of our address space, and + * the Host told us how big it is when we made LGUEST_INIT hypercall: + * it put the answer in lguest_data.reserve_mem */ reserve_top_address(lguest_data.reserve_mem); /* If we don't initialize the lock dependency checker now, it crashes @@ -1027,6 +1041,7 @@ __init void lguest_init(void) /* Math is always hard! */ new_cpu_data.hard_math = 1; + /* We don't have features. We have puppies! Puppies! */ #ifdef CONFIG_X86_MCE mce_disabled = 1; #endif @@ -1044,10 +1059,11 @@ __init void lguest_init(void) virtio_cons_early_init(early_put_chars); /* Last of all, we set the power management poweroff hook to point to - * the Guest routine to power off. */ + * the Guest routine to power off, and the reboot hook to our restart + * routine. */ pm_power_off = lguest_power_off; - machine_ops.restart = lguest_restart; + /* Now we're set up, call start_kernel() in init/main.c and we proceed * to boot as normal. It never returns. */ start_kernel(); |