diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/pci/Makefile | 5 | ||||
| -rw-r--r-- | arch/x86/pci/Makefile_32 | 14 | ||||
| -rw-r--r-- | arch/x86/pci/acpi.c | 90 | ||||
| -rw-r--r-- | arch/x86/pci/common.c | 480 | ||||
| -rw-r--r-- | arch/x86/pci/direct.c | 302 | ||||
| -rw-r--r-- | arch/x86/pci/early.c | 59 | ||||
| -rw-r--r-- | arch/x86/pci/fixup.c | 446 | ||||
| -rw-r--r-- | arch/x86/pci/i386.c | 315 | ||||
| -rw-r--r-- | arch/x86/pci/init.c | 37 | ||||
| -rw-r--r-- | arch/x86/pci/irq.c | 1173 | ||||
| -rw-r--r-- | arch/x86/pci/legacy.c | 56 | ||||
| -rw-r--r-- | arch/x86/pci/mmconfig-shared.c | 315 | ||||
| -rw-r--r-- | arch/x86/pci/mmconfig_32.c | 148 | ||||
| -rw-r--r-- | arch/x86/pci/numa.c | 135 | ||||
| -rw-r--r-- | arch/x86/pci/pcbios.c | 492 | ||||
| -rw-r--r-- | arch/x86/pci/pci.h | 149 | ||||
| -rw-r--r-- | arch/x86/pci/visws.c | 111 |
17 files changed, 4327 insertions, 0 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile new file mode 100644 index 00000000000..b3e54c45d40 --- /dev/null +++ b/arch/x86/pci/Makefile @@ -0,0 +1,5 @@ +ifeq ($(CONFIG_X86_32),y) +include ${srctree}/arch/x86/pci/Makefile_32 +else +include ${srctree}/arch/x86_64/pci/Makefile_64 +endif diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 new file mode 100644 index 00000000000..cdd6828b5ab --- /dev/null +++ b/arch/x86/pci/Makefile_32 @@ -0,0 +1,14 @@ +obj-y := i386.o init.o + +obj-$(CONFIG_PCI_BIOS) += pcbios.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_32.o direct.o mmconfig-shared.o +obj-$(CONFIG_PCI_DIRECT) += direct.o + +pci-y := fixup.o +pci-$(CONFIG_ACPI) += acpi.o +pci-y += legacy.o irq.o + +pci-$(CONFIG_X86_VISWS) := visws.o fixup.o +pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o + +obj-y += $(pci-y) common.o early.o diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c new file mode 100644 index 00000000000..bc8a44bddaa --- /dev/null +++ b/arch/x86/pci/acpi.c @@ -0,0 +1,90 @@ +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/numa.h> +#include "pci.h" + +struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) +{ + struct pci_bus *bus; + struct pci_sysdata *sd; + int pxm; + + /* Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. + */ + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); + return NULL; + } + + if (domain != 0) { + printk(KERN_WARNING "PCI: Multiple domains not supported\n"); + kfree(sd); + return NULL; + } + + sd->node = -1; + + pxm = acpi_get_pxm(device->handle); +#ifdef CONFIG_ACPI_NUMA + if (pxm >= 0) + sd->node = pxm_to_node(pxm); +#endif + + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); + +#ifdef CONFIG_ACPI_NUMA + if (bus != NULL) { + if (pxm >= 0) { + printk("bus %d -> pxm %d -> node %d\n", + busnum, pxm, sd->node); + } + } +#endif + + return bus; +} + +extern int pci_routeirq; +static int __init pci_acpi_init(void) +{ + struct pci_dev *dev = NULL; + + if (pcibios_scanned) + return 0; + + if (acpi_noirq) + return 0; + + printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); + acpi_irq_penalty_init(); + pcibios_scanned++; + pcibios_enable_irq = acpi_pci_irq_enable; + pcibios_disable_irq = acpi_pci_irq_disable; + + if (pci_routeirq) { + /* + * PCI IRQ routing is set up by pci_enable_device(), but we + * also do it here in case there are still broken drivers that + * don't use pci_enable_device(). + */ + printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); + for_each_pci_dev(dev) + acpi_pci_irq_enable(dev); + } else + printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\". If it helps, post a report\n"); + +#ifdef CONFIG_X86_IO_APIC + if (acpi_ioapic) + print_IO_APIC(); +#endif + + return 0; +} +subsys_initcall(pci_acpi_init); diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c new file mode 100644 index 00000000000..ebc6f3c6634 --- /dev/null +++ b/arch/x86/pci/common.c @@ -0,0 +1,480 @@ +/* + * Low-Level PCI Support for PC + * + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + */ + +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/dmi.h> + +#include <asm/acpi.h> +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/smp.h> + +#include "pci.h" + +unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | + PCI_PROBE_MMCONF; + +static int pci_bf_sort; +int pci_routeirq; +int pcibios_last_bus = -1; +unsigned long pirq_table_addr; +struct pci_bus *pci_root_bus; +struct pci_raw_ops *raw_pci_ops; + +static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + return raw_pci_ops->read(0, bus->number, devfn, where, size, value); +} + +static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + return raw_pci_ops->write(0, bus->number, devfn, where, size, value); +} + +struct pci_ops pci_root_ops = { + .read = pci_read, + .write = pci_write, +}; + +/* + * legacy, numa, and acpi all want to call pcibios_scan_root + * from their initcalls. This flag prevents that. + */ +int pcibios_scanned; + +/* + * This interrupt-safe spinlock protects all accesses to PCI + * configuration space. + */ +DEFINE_SPINLOCK(pci_config_lock); + +/* + * Several buggy motherboards address only 16 devices and mirror + * them to next 16 IDs. We try to detect this `feature' on all + * primary buses (those containing host bridges as they are + * expected to be unique) and remove the ghost devices. + */ + +static void __devinit pcibios_fixup_ghosts(struct pci_bus *b) +{ + struct list_head *ln, *mn; + struct pci_dev *d, *e; + int mirror = PCI_DEVFN(16,0); + int seen_host_bridge = 0; + int i; + + DBG("PCI: Scanning for ghost devices on bus %d\n", b->number); + list_for_each(ln, &b->devices) { + d = pci_dev_b(ln); + if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST) + seen_host_bridge++; + for (mn=ln->next; mn != &b->devices; mn=mn->next) { + e = pci_dev_b(mn); + if (e->devfn != d->devfn + mirror || + e->vendor != d->vendor || + e->device != d->device || + e->class != d->class) + continue; + for(i=0; i<PCI_NUM_RESOURCES; i++) + if (e->resource[i].start != d->resource[i].start || + e->resource[i].end != d->resource[i].end || + e->resource[i].flags != d->resource[i].flags) + continue; + break; + } + if (mn == &b->devices) + return; + } + if (!seen_host_bridge) + return; + printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number); + + ln = &b->devices; + while (ln->next != &b->devices) { + d = pci_dev_b(ln->next); + if (d->devfn >= mirror) { + list_del(&d->global_list); + list_del(&d->bus_list); + kfree(d); + } else + ln = ln->next; + } +} + +/* + * Called after each bus is probed, but before its children + * are examined. + */ + +void __devinit pcibios_fixup_bus(struct pci_bus *b) +{ + pcibios_fixup_ghosts(b); + pci_read_bridge_bases(b); +} + +/* + * Only use DMI information to set this if nothing was passed + * on the kernel command line (which was parsed earlier). + */ + +static int __devinit set_bf_sort(struct dmi_system_id *d) +{ + if (pci_bf_sort == pci_bf_sort_default) { + pci_bf_sort = pci_dmi_bf; + printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); + } + return 0; +} + +/* + * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) + */ +#ifdef __i386__ +static int __devinit assign_all_busses(struct dmi_system_id *d) +{ + pci_probe |= PCI_ASSIGN_ALL_BUSSES; + printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" + " (pci=assign-busses)\n", d->ident); + return 0; +} +#endif + +static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { +#ifdef __i386__ +/* + * Laptops which need pci=assign-busses to see Cardbus cards + */ + { + .callback = assign_all_busses, + .ident = "Samsung X20 Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), + }, + }, +#endif /* __i386__ */ + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1955", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge R900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL20p G3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL20p G4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL30p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL25p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL35p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL45p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL45p G2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL460c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL465c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL480c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL685c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"), + }, + }, + {} +}; + +struct pci_bus * __devinit pcibios_scan_root(int busnum) +{ + struct pci_bus *bus = NULL; + struct pci_sysdata *sd; + + dmi_check_system(pciprobe_dmi_table); + + while ((bus = pci_find_next_bus(bus)) != NULL) { + if (bus->number == busnum) { + /* Already scanned */ + return bus; + } + } + + /* Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. + */ + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); + return NULL; + } + + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + + return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); +} + +extern u8 pci_cache_line_size; + +static int __init pcibios_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + if (!raw_pci_ops) { + printk(KERN_WARNING "PCI: System does not support PCI\n"); + return 0; + } + + /* + * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8 + * and P4. It's also good for 386/486s (which actually have 16) + * as quite a few PCI devices do not support smaller values. + */ + pci_cache_line_size = 32 >> 2; + if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD) + pci_cache_line_size = 64 >> 2; /* K7 & K8 */ + else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL) + pci_cache_line_size = 128 >> 2; /* P4 */ + + pcibios_resource_survey(); + + if (pci_bf_sort >= pci_force_bf) + pci_sort_breadthfirst(); +#ifdef CONFIG_PCI_BIOS + if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) + pcibios_sort(); +#endif + return 0; +} + +subsys_initcall(pcibios_init); + +char * __devinit pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } else if (!strcmp(str, "bfsort")) { + pci_bf_sort = pci_force_bf; + return NULL; + } else if (!strcmp(str, "nobfsort")) { + pci_bf_sort = pci_force_nobf; + return NULL; + } +#ifdef CONFIG_PCI_BIOS + else if (!strcmp(str, "bios")) { + pci_probe = PCI_PROBE_BIOS; + return NULL; + } else if (!strcmp(str, "nobios")) { + pci_probe &= ~PCI_PROBE_BIOS; + return NULL; + } else if (!strcmp(str, "nosort")) { + pci_probe |= PCI_NO_SORT; + return NULL; + } else if (!strcmp(str, "biosirq")) { + pci_probe |= PCI_BIOS_IRQ_SCAN; + return NULL; + } else if (!strncmp(str, "pirqaddr=", 9)) { + pirq_table_addr = simple_strtoul(str+9, NULL, 0); + return NULL; + } +#endif +#ifdef CONFIG_PCI_DIRECT + else if (!strcmp(str, "conf1")) { + pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS; + return NULL; + } + else if (!strcmp(str, "conf2")) { + pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS; + return NULL; + } +#endif +#ifdef CONFIG_PCI_MMCONFIG + else if (!strcmp(str, "nommconf")) { + pci_probe &= ~PCI_PROBE_MMCONF; + return NULL; + } +#endif + else if (!strcmp(str, "noacpi")) { + acpi_noirq_set(); + return NULL; + } + else if (!strcmp(str, "noearly")) { + pci_probe |= PCI_PROBE_NOEARLY; + return NULL; + } +#ifndef CONFIG_X86_VISWS + else if (!strcmp(str, "usepirqmask")) { + pci_probe |= PCI_USE_PIRQ_MASK; + return NULL; + } else if (!strncmp(str, "irqmask=", 8)) { + pcibios_irq_mask = simple_strtol(str+8, NULL, 0); + return NULL; + } else if (!strncmp(str, "lastbus=", 8)) { + pcibios_last_bus = simple_strtol(str+8, NULL, 0); + return NULL; + } +#endif + else if (!strcmp(str, "rom")) { + pci_probe |= PCI_ASSIGN_ROMS; + return NULL; + } else if (!strcmp(str, "assign-busses")) { + pci_probe |= PCI_ASSIGN_ALL_BUSSES; + return NULL; + } else if (!strcmp(str, "routeirq")) { + pci_routeirq = 1; + return NULL; + } + return str; +} + +unsigned int pcibios_assign_all_busses(void) +{ + return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + int err; + + if ((err = pcibios_enable_resources(dev, mask)) < 0) + return err; + + if (!dev->msi_enabled) + return pcibios_enable_irq(dev); + return 0; +} + +void pcibios_disable_device (struct pci_dev *dev) +{ + if (!dev->msi_enabled && pcibios_disable_irq) + pcibios_disable_irq(dev); +} + +struct pci_bus *pci_scan_bus_with_sysdata(int busno) +{ + struct pci_bus *bus = NULL; + struct pci_sysdata *sd; + + /* + * Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. + */ + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); + return NULL; + } + sd->node = -1; + bus = pci_scan_bus(busno, &pci_root_ops, sd); + if (!bus) + kfree(sd); + + return bus; +} diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c new file mode 100644 index 00000000000..431c9a51b15 --- /dev/null +++ b/arch/x86/pci/direct.c @@ -0,0 +1,302 @@ +/* + * direct.c - Low-level direct PCI config space access + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include "pci.h" + +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ + +#define PCI_CONF1_ADDRESS(bus, devfn, reg) \ + (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + +int pci_conf1_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + unsigned long flags; + + if ((bus > 255) || (devfn > 255) || (reg > 255)) { + *value = -1; + return -EINVAL; + } + + spin_lock_irqsave(&pci_config_lock, flags); + + outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8); + + switch (len) { + case 1: + *value = inb(0xCFC + (reg & 3)); + break; + case 2: + *value = inw(0xCFC + (reg & 2)); + break; + case 4: + *value = inl(0xCFC); + break; + } + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +int pci_conf1_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + unsigned long flags; + + if ((bus > 255) || (devfn > 255) || (reg > 255)) + return -EINVAL; + + spin_lock_irqsave(&pci_config_lock, flags); + + outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8); + + switch (len) { + case 1: + outb((u8)value, 0xCFC + (reg & 3)); + break; + case 2: + outw((u16)value, 0xCFC + (reg & 2)); + break; + case 4: + outl((u32)value, 0xCFC); + break; + } + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +#undef PCI_CONF1_ADDRESS + +struct pci_raw_ops pci_direct_conf1 = { + .read = pci_conf1_read, + .write = pci_conf1_write, +}; + + +/* + * Functions for accessing PCI configuration space with type 2 accesses + */ + +#define PCI_CONF2_ADDRESS(dev, reg) (u16)(0xC000 | (dev << 8) | reg) + +static int pci_conf2_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + unsigned long flags; + int dev, fn; + + if ((bus > 255) || (devfn > 255) || (reg > 255)) { + *value = -1; + return -EINVAL; + } + + dev = PCI_SLOT(devfn); + fn = PCI_FUNC(devfn); + + if (dev & 0x10) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&pci_config_lock, flags); + + outb((u8)(0xF0 | (fn << 1)), 0xCF8); + outb((u8)bus, 0xCFA); + + switch (len) { + case 1: + *value = inb(PCI_CONF2_ADDRESS(dev, reg)); + break; + case 2: + *value = inw(PCI_CONF2_ADDRESS(dev, reg)); + break; + case 4: + *value = inl(PCI_CONF2_ADDRESS(dev, reg)); + break; + } + + outb(0, 0xCF8); + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +static int pci_conf2_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + unsigned long flags; + int dev, fn; + + if ((bus > 255) || (devfn > 255) || (reg > 255)) + return -EINVAL; + + dev = PCI_SLOT(devfn); + fn = PCI_FUNC(devfn); + + if (dev & 0x10) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&pci_config_lock, flags); + + outb((u8)(0xF0 | (fn << 1)), 0xCF8); + outb((u8)bus, 0xCFA); + + switch (len) { + case 1: + outb((u8)value, PCI_CONF2_ADDRESS(dev, reg)); + break; + case 2: + outw((u16)value, PCI_CONF2_ADDRESS(dev, reg)); + break; + case 4: + outl((u32)value, PCI_CONF2_ADDRESS(dev, reg)); + break; + } + + outb(0, 0xCF8); + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +#undef PCI_CONF2_ADDRESS + +static struct pci_raw_ops pci_direct_conf2 = { + .read = pci_conf2_read, + .write = pci_conf2_write, +}; + + +/* + * Before we decide to use direct hardware access mechanisms, we try to do some + * trivial checks to ensure it at least _seems_ to be working -- we just test + * whether bus 00 contains a host bridge (this is similar to checking + * techniques used in XFree86, but ours should be more reliable since we + * attempt to make use of direct access hints provided by the PCI BIOS). + * + * This should be close to trivial, but it isn't, because there are buggy + * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. + */ +static int __init pci_sanity_check(struct pci_raw_ops *o) +{ + u32 x = 0; + int devfn; + + if (pci_probe & PCI_NO_CHECKS) + return 1; + /* Assume Type 1 works for newer systems. + This handles machines that don't have anything on PCI Bus 0. */ + if (dmi_get_year(DMI_BIOS_DATE) >= 2001) + return 1; + + for (devfn = 0; devfn < 0x100; devfn++) { + if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x)) + continue; + if (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA) + return 1; + + if (o->read(0, 0, devfn, PCI_VENDOR_ID, 2, &x)) + continue; + if (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ) + return 1; + } + + DBG(KERN_WARNING "PCI: Sanity check failed\n"); + return 0; +} + +static int __init pci_check_type1(void) +{ + unsigned long flags; + unsigned int tmp; + int works = 0; + + local_irq_save(flags); + + outb(0x01, 0xCFB); + tmp = inl(0xCF8); + outl(0x80000000, 0xCF8); + if (inl(0xCF8) == 0x80000000 && pci_sanity_check(&pci_direct_conf1)) { + works = 1; + } + outl(tmp, 0xCF8); + local_irq_restore(flags); + + return works; +} + +static int __init pci_check_type2(void) +{ + unsigned long flags; + int works = 0; + + local_irq_save(flags); + + outb(0x00, 0xCFB); + outb(0x00, 0xCF8); + outb(0x00, 0xCFA); + if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 && + pci_sanity_check(&pci_direct_conf2)) { + works = 1; + } + + local_irq_restore(flags); + + return works; +} + +void __init pci_direct_init(int type) +{ + if (type == 0) + return; + printk(KERN_INFO "PCI: Using configuration type %d\n", type); + if (type == 1) + raw_pci_ops = &pci_direct_conf1; + else + raw_pci_ops = &pci_direct_conf2; +} + +int __init pci_direct_probe(void) +{ + struct resource *region, *region2; + + if ((pci_probe & PCI_PROBE_CONF1) == 0) + goto type2; + region = request_region(0xCF8, 8, "PCI conf1"); + if (!region) + goto type2; + + if (pci_check_type1()) + return 1; + release_resource(region); + + type2: + if ((pci_probe & PCI_PROBE_CONF2) == 0) + return 0; + region = request_region(0xCF8, 4, "PCI conf2"); + if (!region) + return 0; + region2 = request_region(0xC000, 0x1000, "PCI conf2"); + if (!region2) + goto fail2; + + if (pci_check_type2()) { + printk(KERN_INFO "PCI: Using configuration type 2\n"); + raw_pci_ops = &pci_direct_conf2; + return 2; + } + + release_resource(region2); + fail2: + release_resource(region); + return 0; +} diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c new file mode 100644 index 00000000000..42df4b6606d --- /dev/null +++ b/arch/x86/pci/early.c @@ -0,0 +1,59 @@ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/pci-direct.h> +#include <asm/io.h> +#include "pci.h" + +/* Direct PCI access. This is used for PCI accesses in early boot before + the PCI subsystem works. */ + +#define PDprintk(x...) + +u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) +{ + u32 v; + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + v = inl(0xcfc); + if (v != 0xffffffff) + PDprintk("%x reading 4 from %x: %x\n", slot, offset, v); + return v; +} + +u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) +{ + u8 v; + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + v = inb(0xcfc + (offset&3)); + PDprintk("%x reading 1 from %x: %x\n", slot, offset, v); + return v; +} + +u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) +{ + u16 v; + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + v = inw(0xcfc + (offset&2)); + PDprintk("%x reading 2 from %x: %x\n", slot, offset, v); + return v; +} + +void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, + u32 val) +{ + PDprintk("%x writing to %x: %x\n", slot, offset, val); + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + outl(val, 0xcfc); +} + +void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) +{ + PDprintk("%x writing to %x: %x\n", slot, offset, val); + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + outb(val, 0xcfc); +} + +int early_pci_allowed(void) +{ + return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == + PCI_PROBE_CONF1; +} diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c new file mode 100644 index 00000000000..c82cbf4c722 --- /dev/null +++ b/arch/x86/pci/fixup.c @@ -0,0 +1,446 @@ +/* + * Exceptions for specific devices. Usually work-arounds for fatal design flaws. + */ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/pci.h> +#include <linux/init.h> +#include "pci.h" + + +static void __devinit pci_fixup_i450nx(struct pci_dev *d) +{ + /* + * i450NX -- Find and scan all secondary buses on all PXB's. + */ + int pxb, reg; + u8 busno, suba, subb; + + printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d)); + reg = 0xd0; + for(pxb=0; pxb<2; pxb++) { + pci_read_config_byte(d, reg++, &busno); + pci_read_config_byte(d, reg++, &suba); + pci_read_config_byte(d, reg++, &subb); + DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); + if (busno) + pci_scan_bus_with_sysdata(busno); /* Bus A */ + if (suba < subb) + pci_scan_bus_with_sysdata(suba+1); /* Bus B */ + } + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); + +static void __devinit pci_fixup_i450gx(struct pci_dev *d) +{ + /* + * i450GX and i450KX -- Find and scan all secondary buses. + * (called separately for each PCI bridge found) + */ + u8 busno; + pci_read_config_byte(d, 0x4a, &busno); + printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno); + pci_scan_bus_with_sysdata(busno); + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); + +static void __devinit pci_fixup_umc_ide(struct pci_dev *d) +{ + /* + * UM8886BF IDE controller sets region type bits incorrectly, + * therefore they look like memory despite of them being I/O. + */ + int i; + + printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d)); + for(i=0; i<4; i++) + d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); + +static void __devinit pci_fixup_ncr53c810(struct pci_dev *d) +{ + /* + * NCR 53C810 returns class code 0 (at least on some systems). + * Fix class to be PCI_CLASS_STORAGE_SCSI + */ + if (!d->class) { + printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d)); + d->class = PCI_CLASS_STORAGE_SCSI << 8; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); + +static void __devinit pci_fixup_latency(struct pci_dev *d) +{ + /* + * SiS 5597 and 5598 chipsets require latency timer set to + * at most 32 to avoid lockups. + */ + DBG("PCI: Setting max latency to 32\n"); + pcibios_max_latency = 32; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); + +static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d) +{ + /* + * PIIX4 ACPI device: hardwired IRQ9 + */ + d->irq = 9; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi); + +/* + * Addresses issues with problems in the memory write queue timer in + * certain VIA Northbridges. This bugfix is per VIA's specifications, + * except for the KL133/KM133: clearing bit 5 on those Northbridges seems + * to trigger a bug in its integrated ProSavage video card, which + * causes screen corruption. We only clear bits 6 and 7 for that chipset, + * until VIA can provide us with definitive information on why screen + * corruption occurs, and what exactly those bits do. + * + * VIA 8363,8622,8361 Northbridges: + * - bits 5, 6, 7 at offset 0x55 need to be turned off + * VIA 8367 (KT266x) Northbridges: + * - bits 5, 6, 7 at offset 0x95 need to be turned off + * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges: + * - bits 6, 7 at offset 0x55 need to be turned off + */ + +#define VIA_8363_KL133_REVISION_ID 0x81 +#define VIA_8363_KM133_REVISION_ID 0x84 + +static void pci_fixup_via_northbridge_bug(struct pci_dev *d) +{ + u8 v; + int where = 0x55; + int mask = 0x1f; /* clear bits 5, 6, 7 by default */ + + if (d->device == PCI_DEVICE_ID_VIA_8367_0) { + /* fix pci bus latency issues resulted by NB bios error + it appears on bug free^Wreduced kt266x's bios forces + NB latency to zero */ + pci_write_config_byte(d, PCI_LATENCY_TIMER, 0); + + where = 0x95; /* the memory write queue timer register is + different for the KT266x's: 0x95 not 0x55 */ + } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && + (d->revision == VIA_8363_KL133_REVISION_ID || + d->revision == VIA_8363_KM133_REVISION_ID)) { + mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 + causes screen corruption on the KL133/KM133 */ + } + + pci_read_config_byte(d, where, &v); + if (v & ~mask) { + printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ + d->device, d->revision, where, v, mask, v & mask); + v &= mask; + pci_write_config_byte(d, where, v); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); + +/* + * For some reasons Intel decided that certain parts of their + * 815, 845 and some other chipsets must look like PCI-to-PCI bridges + * while they are obviously not. The 82801 family (AA, AB, BAM/CAM, + * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according + * to Intel terminology. These devices do forward all addresses from + * system to PCI bus no matter what are their window settings, so they are + * "transparent" (or subtractive decoding) from programmers point of view. + */ +static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (dev->device & 0xff00) == 0x2400) + dev->transparent = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge); + +/* + * Fixup for C1 Halt Disconnect problem on nForce2 systems. + * + * From information provided by "Allen Martin" <AMartin@nvidia.com>: + * + * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle + * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns. + * This allows the state-machine and timer to return to a proper state within + * 80 ns of the CONNECT and probe appearing together. Since the CPU will not + * issue another HALT within 80 ns of the initial HALT, the failure condition + * is avoided. + */ +static void pci_fixup_nforce2(struct pci_dev *dev) +{ + u32 val; + + /* + * Chip Old value New value + * C17 0x1F0FFF01 0x1F01FF01 + * C18D 0x9F0FFF01 0x9F01FF01 + * + * Northbridge chip version may be determined by + * reading the PCI revision ID (0xC1 or greater is C18D). + */ + pci_read_config_dword(dev, 0x6c, &val); + + /* + * Apply fixup if needed, but don't touch disconnect state + */ + if ((val & 0x00FF0000) != 0x00010000) { + printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n"); + pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); + +/* Max PCI Express root ports */ +#define MAX_PCIEROOT 6 +static int quirk_aspm_offset[MAX_PCIEROOT << 3]; + +#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7)) + +static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + return raw_pci_ops->read(0, bus->number, devfn, where, size, value); +} + +/* + * Replace the original pci bus ops for write with a new one that will filter + * the request to insure ASPM cannot be enabled. + */ +static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + u8 offset; + + offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)]; + + if ((offset) && (where == offset)) + value = value & 0xfffffffc; + + return raw_pci_ops->write(0, bus->number, devfn, where, size, value); +} + +static struct pci_ops quirk_pcie_aspm_ops = { + .read = quirk_pcie_aspm_read, + .write = quirk_pcie_aspm_write, +}; + +/* + * Prevents PCI Express ASPM (Active State Power Management) being enabled. + * + * Save the register offset, where the ASPM control bits are located, + * for each PCI Express device that is in the device list of + * the root port in an array for fast indexing. Replace the bus ops + * with the modified one. + */ +static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) +{ + int cap_base, i; + struct pci_bus *pbus; + struct pci_dev *dev; + + if ((pbus = pdev->subordinate) == NULL) + return; + + /* + * Check if the DID of pdev matches one of the six root ports. This + * check is needed in the case this function is called directly by the + * hot-plug driver. + */ + if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) || + (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1)) + return; + + if (list_empty(&pbus->devices)) { + /* + * If no device is attached to the root port at power-up or + * after hot-remove, the pbus->devices is empty and this code + * will set the offsets to zero and the bus ops to parent's bus + * ops, which is unmodified. + */ + for (i= GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i) + quirk_aspm_offset[i] = 0; + + pbus->ops = pbus->parent->ops; + } else { + /* + * If devices are attached to the root port at power-up or + * after hot-add, the code loops through the device list of + * each root port to save the register offsets and replace the + * bus ops. + */ + list_for_each_entry(dev, &pbus->devices, bus_list) { + /* There are 0 to 8 devices attached to this bus */ + cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP); + quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)]= cap_base + 0x10; + } + pbus->ops = &quirk_pcie_aspm_ops; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk ); + +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + + /* + * From information provided by + * "David Miller" <davem@davemloft.net> + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge + &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) + ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); + +/* + * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. + * + * We pretend to bring them out of full D3 state, and restore the proper + * IRQ, PCI cache line size, and BARs, otherwise the device won't function + * properly. In some cases, the device will generate an interrupt on + * the wrong IRQ line, causing any devices sharing the line it's + * *supposed* to use to be disabled by the kernel's IRQ debug code. + */ +static u16 toshiba_line_size; + +static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = { + { + .ident = "Toshiba PS5 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), + }, + }, + { + .ident = "Toshiba PSM4 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), + }, + }, + { + .ident = "Toshiba A40 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"), + }, + }, + { } +}; + +static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + dev->current_state = PCI_D3cold; + pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, + pci_pre_fixup_toshiba_ohci1394); + +static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + /* Restore config space on Toshiba laptops */ + pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + pci_resource_start(dev, 0)); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, + pci_resource_start(dev, 1)); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, + pci_post_fixup_toshiba_ohci1394); + + +/* + * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device + * configuration space. + */ +static void pci_early_fixup_cyrix_5530(struct pci_dev *dev) +{ + u8 r; + /* clear 'F4 Video Configuration Trap' bit */ + pci_read_config_byte(dev, 0x42, &r); + r &= 0xfd; + pci_write_config_byte(dev, 0x42, r); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + pci_early_fixup_cyrix_5530); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + pci_early_fixup_cyrix_5530); + +/* + * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller: + * prevent update of the BAR0, which doesn't look like a normal BAR. + */ +static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev) +{ + dev->resource[0].flags |= IORESOURCE_PCI_FIXED; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, + pci_siemens_interrupt_controller); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c new file mode 100644 index 00000000000..bcd2f94b732 --- /dev/null +++ b/arch/x86/pci/i386.c @@ -0,0 +1,315 @@ +/* + * Low-Level PCI Access for i386 machines + * + * Copyright 1993, 1994 Drew Eckhardt + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * Drew@Colorado.EDU + * +1 (303) 786-7975 + * + * Drew's work was sponsored by: + * iX Multiuser Multitasking Magazine + * Hannover, Germany + * hm@ix.de + * + * Copyright 1997--2000 Martin Mares <mj@ucw.cz> + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + * + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/errno.h> + +#include "pci.h" + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +void +pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + if (res->flags & IORESOURCE_IO) { + resource_size_t start = res->start; + + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} + + +/* + * Handle resources of PCI devices. If the world were perfect, we could + * just allocate all the resource regions and do nothing more. It isn't. + * On the other hand, we cannot just re-allocate all devices, as it would + * require us to know lots of host bridge internals. So we attempt to + * keep as much of the original configuration as possible, but tweak it + * when it's found to be wrong. + * + * Known BIOS problems we have to work around: + * - I/O or memory regions not configured + * - regions configured, but not enabled in the command register + * - bogus I/O addresses above 64K used + * - expansion ROMs left enabled (this may sound harmless, but given + * the fact the PCI specs explicitly allow address decoders to be + * shared between expansion ROMs and other resource regions, it's + * at least dangerous) + * + * Our solution: + * (1) Allocate resources for all buses behind PCI-to-PCI bridges. + * This gives us fixed barriers on where we can allocate. + * (2) Allocate resources for all enabled devices. If there is + * a collision, just mark the resource as unallocated. Also + * disable expansion ROMs during this step. + * (3) Try to allocate resources for disabled devices. If the + * resources were assigned correctly, everything goes well, + * if they weren't, they won't disturb allocation of other + * resources. + * (4) Assign new addresses to resources which were either + * not configured at all or misconfigured. If explicitly + * requested by the user, configure expansion ROM address + * as well. + */ + +static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) +{ + struct pci_bus *bus; + struct pci_dev *dev; + int idx; + struct resource *r, *pr; + + /* Depth-First Search on bus tree */ + list_for_each_entry(bus, bus_list, node) { + if ((dev = bus->self)) { + for (idx = PCI_BRIDGE_RESOURCES; + idx < PCI_NUM_RESOURCES; idx++) { + r = &dev->resource[idx]; + if (!r->flags) + continue; + pr = pci_find_parent_resource(dev, r); + if (!r->start || !pr || + request_resource(pr, r) < 0) { + printk(KERN_ERR "PCI: Cannot allocate " + "resource region %d " + "of bridge %s\n", + idx, pci_name(dev)); + /* + * Something is wrong with the region. + * Invalidate the resource to prevent + * child resource allocations in this + * range. + */ + r->flags = 0; + } + } + } + pcibios_allocate_bus_resources(&bus->children); + } +} + +static void __init pcibios_allocate_resources(int pass) +{ + struct pci_dev *dev = NULL; + int idx, disabled; + u16 command; + struct resource *r, *pr; + + for_each_pci_dev(dev) { + pci_read_config_word(dev, PCI_COMMAND, &command); + for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) { + r = &dev->resource[idx]; + if (r->parent) /* Already allocated */ + continue; + if (!r->start) /* Address not assigned at all */ + continue; + if (r->flags & IORESOURCE_IO) + disabled = !(command & PCI_COMMAND_IO); + else + disabled = !(command & PCI_COMMAND_MEMORY); + if (pass == disabled) { + DBG("PCI: Resource %08lx-%08lx " + "(f=%lx, d=%d, p=%d)\n", + r->start, r->end, r->flags, disabled, pass); + pr = pci_find_parent_resource(dev, r); + if (!pr || request_resource(pr, r) < 0) { + printk(KERN_ERR "PCI: Cannot allocate " + "resource region %d " + "of device %s\n", + idx, pci_name(dev)); + /* We'll assign a new address later */ + r->end -= r->start; + r->start = 0; + } + } + } + if (!pass) { + r = &dev->resource[PCI_ROM_RESOURCE]; + if (r->flags & IORESOURCE_ROM_ENABLE) { + /* Turn the ROM off, leave the resource region, + * but keep it unregistered. */ + u32 reg; + DBG("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_read_config_dword(dev, + dev->rom_base_reg, ®); + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } + } + } +} + +static int __init pcibios_assign_resources(void) +{ + struct pci_dev *dev = NULL; + struct resource *r, *pr; + + if (!(pci_probe & PCI_ASSIGN_ROMS)) { + /* + * Try to use BIOS settings for ROMs, otherwise let + * pci_assign_unassigned_resources() allocate the new + * addresses. + */ + for_each_pci_dev(dev) { + r = &dev->resource[PCI_ROM_RESOURCE]; + if (!r->flags || !r->start) + continue; + pr = pci_find_parent_resource(dev, r); + if (!pr || request_resource(pr, r) < 0) { + r->end -= r->start; + r->start = 0; + } + } + } + + pci_assign_unassigned_resources(); + + return 0; +} + +void __init pcibios_resource_survey(void) +{ + DBG("PCI: Allocating resources\n"); + pcibios_allocate_bus_resources(&pci_root_buses); + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); +} + +/** + * called in fs_initcall (one below subsys_initcall), + * give a chance for motherboard reserve resources + */ +fs_initcall(pcibios_assign_resources); + +int pcibios_enable_resources(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1 << idx))) + continue; + + r = &dev->resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource %d collisions\n", + pci_name(dev), idx); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check the latency + * timer as certain crappy BIOSes forget to set it properly. + */ +unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long prot; + + /* I/O space cannot be accessed via normal processor loads and + * stores on this platform. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* Leave vm_pgoff as-is, the PCI space address is the physical + * address on this platform. + */ + prot = pgprot_val(vma->vm_page_prot); + if (boot_cpu_data.x86 > 3) + prot |= _PAGE_PCD | _PAGE_PWT; + vma->vm_page_prot = __pgprot(prot); + + /* Write-combine setting is ignored, it is changed via the mtrr + * interfaces on this platform. + */ + if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c new file mode 100644 index 00000000000..3de9f9ba2da --- /dev/null +++ b/arch/x86/pci/init.c @@ -0,0 +1,37 @@ +#include <linux/pci.h> +#include <linux/init.h> +#include "pci.h" + +/* arch_initcall has too random ordering, so call the initializers + in the right sequence from here. */ +static __init int pci_access_init(void) +{ + int type __maybe_unused = 0; + +#ifdef CONFIG_PCI_DIRECT + type = pci_direct_probe(); +#endif +#ifdef CONFIG_PCI_MMCONFIG + pci_mmcfg_init(type); +#endif + if (raw_pci_ops) + return 0; +#ifdef CONFIG_PCI_BIOS + pci_pcbios_init(); +#endif + /* + * don't check for raw_pci_ops here because we want pcbios as last + * fallback, yet it's needed to run first to set pcibios_last_bus + * in case legacy PCI probing is used. otherwise detecting peer busses + * fails. + */ +#ifdef CONFIG_PCI_DIRECT + pci_direct_init(type); +#endif + if (!raw_pci_ops) + printk(KERN_ERR + "PCI: Fatal: No config space access function found\n"); + + return 0; +} +arch_initcall(pci_access_init); diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c new file mode 100644 index 00000000000..8434f2323b8 --- /dev/null +++ b/arch/x86/pci/irq.c @@ -0,0 +1,1173 @@ +/* + * Low-Level PCI Support for PC -- Routing of Interrupts + * + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/dmi.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/io_apic.h> +#include <linux/irq.h> +#include <linux/acpi.h> + +#include "pci.h" + +#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) +#define PIRQ_VERSION 0x0100 + +static int broken_hp_bios_irq9; +static int acer_tm360_irqrouting; + +static struct irq_routing_table *pirq_table; + +static int pirq_enable_irq(struct pci_dev *dev); + +/* + * Never use: 0, 1, 2 (timer, keyboard, and cascade) + * Avoid using: 13, 14 and 15 (FP error and IDE). + * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse) + */ +unsigned int pcibios_irq_mask = 0xfff8; + +static int pirq_penalty[16] = { + 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000, + 0, 0, 0, 0, 1000, 100000, 100000, 100000 +}; + +struct irq_router { + char *name; + u16 vendor, device; + int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); + int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new); +}; + +struct irq_router_handler { + u16 vendor; + int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); +}; + +int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; +void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; + +/* + * Check passed address for the PCI IRQ Routing Table signature + * and perform checksum verification. + */ + +static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +{ + struct irq_routing_table *rt; + int i; + u8 sum; + + rt = (struct irq_routing_table *) addr; + if (rt->signature != PIRQ_SIGNATURE || + rt->version != PIRQ_VERSION || + rt->size % 16 || + rt->size < sizeof(struct irq_routing_table)) + return NULL; + sum = 0; + for (i=0; i < rt->size; i++) + sum += addr[i]; + if (!sum) { + DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt); + return rt; + } + return NULL; +} + + + +/* + * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. + */ + +static struct irq_routing_table * __init pirq_find_routing_table(void) +{ + u8 *addr; + struct irq_routing_table *rt; + + if (pirq_table_addr) { + rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr)); + if (rt) + return rt; + printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); + } + for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { + rt = pirq_check_routing_table(addr); + if (rt) + return rt; + } + return NULL; +} + +/* + * If we have a IRQ routing table, use it to search for peer host + * bridges. It's a gross hack, but since there are no other known + * ways how to get a list of buses, we have to go this way. + */ + +static void __init pirq_peer_trick(void) +{ + struct irq_routing_table *rt = pirq_table; + u8 busmap[256]; + int i; + struct irq_info *e; + + memset(busmap, 0, sizeof(busmap)); + for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { + e = &rt->slots[i]; +#ifdef DEBUG + { + int j; + DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); + for(j=0; j<4; j++) + DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); + DBG("\n"); + } +#endif + busmap[e->bus] = 1; + } + for(i = 1; i < 256; i++) { + if (!busmap[i] || pci_find_bus(0, i)) + continue; + if (pci_scan_bus_with_sysdata(i)) + printk(KERN_INFO "PCI: Discovered primary peer " + "bus %02x [IRQ]\n", i); + } + pcibios_last_bus = -1; +} + +/* + * Code for querying and setting of IRQ routes on various interrupt routers. + */ + +void eisa_set_level_irq(unsigned int irq) +{ + unsigned char mask = 1 << (irq & 7); + unsigned int port = 0x4d0 + (irq >> 3); + unsigned char val; + static u16 eisa_irq_mask; + + if (irq >= 16 || (1 << irq) & eisa_irq_mask) + return; + + eisa_irq_mask |= (1 << irq); + printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq); + val = inb(port); + if (!(val & mask)) { + DBG(KERN_DEBUG " -> edge"); + outb(val | mask, port); + } +} + +/* + * Common IRQ routing practice: nybbles in config space, + * offset by some magic constant. + */ +static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) +{ + u8 x; + unsigned reg = offset + (nr >> 1); + + pci_read_config_byte(router, reg, &x); + return (nr & 1) ? (x >> 4) : (x & 0xf); +} + +static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val) +{ + u8 x; + unsigned reg = offset + (nr >> 1); + + pci_read_config_byte(router, reg, &x); + x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val); + pci_write_config_byte(router, reg, x); +} + +/* + * ALI pirq entries are damn ugly, and completely undocumented. + * This has been figured out from pirq tables, and it's not a pretty + * picture. + */ +static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; + + return irqmap[read_config_nybble(router, 0x48, pirq-1)]; +} + +static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; + unsigned int val = irqmap[irq]; + + if (val) { + write_config_nybble(router, 0x48, pirq-1, val); + return 1; + } + return 0; +} + +/* + * The Intel PIIX4 pirq rules are fairly simple: "pirq" is + * just a pointer to the config space. + */ +static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + u8 x; + + pci_read_config_byte(router, pirq, &x); + return (x < 16) ? x : 0; +} + +static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + pci_write_config_byte(router, pirq, irq); + return 1; +} + +/* + * The VIA pirq rules are nibble-based, like ALI, + * but without the ugly irq number munging. + * However, PIRQD is in the upper instead of lower 4 bits. + */ +static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); +} + +static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); + return 1; +} + +/* + * The VIA pirq rules are nibble-based, like ALI, + * but without the ugly irq number munging. + * However, for 82C586, nibble map is different . + */ +static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; + return read_config_nybble(router, 0x55, pirqmap[pirq-1]); +} + +static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; + write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); + return 1; +} + +/* + * ITE 8330G pirq rules are nibble-based + * FIXME: pirqmap may be { 1, 0, 3, 2 }, + * 2+3 are both mapped to irq 9 on my system + */ +static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; + return read_config_nybble(router,0x43, pirqmap[pirq-1]); +} + +static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; + write_config_nybble(router, 0x43, pirqmap[pirq-1], irq); + return 1; +} + +/* + * OPTI: high four bits are nibble pointer.. + * I wonder what the low bits do? + */ +static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + return read_config_nybble(router, 0xb8, pirq >> 4); +} + +static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + write_config_nybble(router, 0xb8, pirq >> 4, irq); + return 1; +} + +/* + * Cyrix: nibble offset 0x5C + * 0x5C bits 7:4 is INTB bits 3:0 is INTA + * 0x5D bits 7:4 is INTD bits 3:0 is INTC + */ +static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + return read_config_nybble(router, 0x5C, (pirq-1)^1); +} + +static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + write_config_nybble(router, 0x5C, (pirq-1)^1, irq); + return 1; +} + +/* + * PIRQ routing for SiS 85C503 router used in several SiS chipsets. + * We have to deal with the following issues here: + * - vendors have different ideas about the meaning of link values + * - some onboard devices (integrated in the chipset) have special + * links and are thus routed differently (i.e. not via PCI INTA-INTD) + * - different revision of the router have a different layout for + * the routing registers, particularly for the onchip devices + * + * For all routing registers the common thing is we have one byte + * per routeable link which is defined as: + * bit 7 IRQ mapping enabled (0) or disabled (1) + * bits [6:4] reserved (sometimes used for onchip devices) + * bits [3:0] IRQ to map to + * allowed: 3-7, 9-12, 14-15 + * reserved: 0, 1, 2, 8, 13 + * + * The config-space registers located at 0x41/0x42/0x43/0x44 are + * always used to route the normal PCI INT A/B/C/D respectively. + * Apparently there are systems implementing PCI routing table using + * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. + * We try our best to handle both link mappings. + * + * Currently (2003-05-21) it appears most SiS chipsets follow the + * definition of routing registers from the SiS-5595 southbridge. + * According to the SiS 5595 datasheets the revision id's of the + * router (ISA-bridge) should be 0x01 or 0xb0. + * + * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1. + * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets. + * They seem to work with the current routing code. However there is + * some concern because of the two USB-OHCI HCs (original SiS 5595 + * had only one). YMMV. + * + * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1: + * + * 0x61: IDEIRQ: + * bits [6:5] must be written 01 + * bit 4 channel-select primary (0), secondary (1) + * + * 0x62: USBIRQ: + * bit 6 OHCI function disabled (0), enabled (1) + * + * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved + * + * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved + * + * We support USBIRQ (in addition to INTA-INTD) and keep the + * IDE, ACPI and DAQ routing untouched as set by the BIOS. + * + * Currently the only reported exception is the new SiS 65x chipset + * which includes the SiS 69x southbridge. Here we have the 85C503 + * router revision 0x04 and there are changes in the register layout + * mostly related to the different USB HCs with USB 2.0 support. + * + * Onchip routing for router rev-id 0x04 (try-and-error observation) + * + * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs + * bit 6-4 are probably unused, not like 5595 + */ + +#define PIRQ_SIS_IRQ_MASK 0x0f +#define PIRQ_SIS_IRQ_DISABLE 0x80 +#define PIRQ_SIS_USB_ENABLE 0x40 + +static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + u8 x; + int reg; + + reg = pirq; + if (reg >= 0x01 && reg <= 0x04) + reg += 0x40; + pci_read_config_byte(router, reg, &x); + return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK); +} + +static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + u8 x; + int reg; + + reg = pirq; + if (reg >= 0x01 && reg <= 0x04) + reg += 0x40; + pci_read_config_byte(router, reg, &x); + x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE); + x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE; + pci_write_config_byte(router, reg, x); + return 1; +} + + +/* + * VLSI: nibble offset 0x74 - educated guess due to routing table and + * config space of VLSI 82C534 PCI-bridge/router (1004:0102) + * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard + * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6 + * for the busbridge to the docking station. + */ + +static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + if (pirq > 8) { + printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq); + return 0; + } + return read_config_nybble(router, 0x74, pirq-1); +} + +static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + if (pirq > 8) { + printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq); + return 0; + } + write_config_nybble(router, 0x74, pirq-1, irq); + return 1; +} + +/* + * ServerWorks: PCI interrupts mapped to system IRQ lines through Index + * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register + * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect + * register is a straight binary coding of desired PIC IRQ (low nibble). + * + * The 'link' value in the PIRQ table is already in the correct format + * for the Index register. There are some special index values: + * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, + * and 0x03 for SMBus. + */ +static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + outb_p(pirq, 0xc00); + return inb(0xc01) & 0xf; +} + +static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + outb_p(pirq, 0xc00); + outb_p(irq, 0xc01); + return 1; +} + +/* Support for AMD756 PCI IRQ Routing + * Jhon H. Caicedo <jhcaiced@osso.org.co> + * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced) + * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced) + * The AMD756 pirq rules are nibble-based + * offset 0x56 0-3 PIRQA 4-7 PIRQB + * offset 0x57 0-3 PIRQC 4-7 PIRQD + */ +static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + u8 irq; + irq = 0; + if (pirq <= 4) + { + irq = read_config_nybble(router, 0x56, pirq - 1); + } + printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", + dev->vendor, dev->device, pirq, irq); + return irq; +} + +static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", + dev->vendor, dev->device, pirq, irq); + if (pirq <= 4) + { + write_config_nybble(router, 0x56, pirq - 1, irq); + } + return 1; +} + +#ifdef CONFIG_PCI_BIOS + +static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + struct pci_dev *bridge; + int pin = pci_get_interrupt_pin(dev, &bridge); + return pcibios_set_irq_routing(bridge, pin, irq); +} + +#endif + +static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + static struct pci_device_id __initdata pirq_440gx[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, + { }, + }; + + /* 440GX has a proprietary PIRQ router -- don't use it */ + if (pci_dev_present(pirq_440gx)) + return 0; + + switch(device) + { + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371SB_0: + case PCI_DEVICE_ID_INTEL_82371AB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + case PCI_DEVICE_ID_INTEL_82443MX_0: + case PCI_DEVICE_ID_INTEL_82801AA_0: + case PCI_DEVICE_ID_INTEL_82801AB_0: + case PCI_DEVICE_ID_INTEL_82801BA_0: + case PCI_DEVICE_ID_INTEL_82801BA_10: + case PCI_DEVICE_ID_INTEL_82801CA_0: + case PCI_DEVICE_ID_INTEL_82801CA_12: + case PCI_DEVICE_ID_INTEL_82801DB_0: + case PCI_DEVICE_ID_INTEL_82801E_0: + case PCI_DEVICE_ID_INTEL_82801EB_0: + case PCI_DEVICE_ID_INTEL_ESB_1: + case PCI_DEVICE_ID_INTEL_ICH6_0: + case PCI_DEVICE_ID_INTEL_ICH6_1: + case PCI_DEVICE_ID_INTEL_ICH7_0: + case PCI_DEVICE_ID_INTEL_ICH7_1: + case PCI_DEVICE_ID_INTEL_ICH7_30: + case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_ESB2_0: + case PCI_DEVICE_ID_INTEL_ICH8_0: + case PCI_DEVICE_ID_INTEL_ICH8_1: + case PCI_DEVICE_ID_INTEL_ICH8_2: + case PCI_DEVICE_ID_INTEL_ICH8_3: + case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_TOLAPAI_0: + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; + } + return 0; +} + +static __init int via_router_probe(struct irq_router *r, + struct pci_dev *router, u16 device) +{ + /* FIXME: We should move some of the quirk fixup stuff here */ + + /* + * work arounds for some buggy BIOSes + */ + if (device == PCI_DEVICE_ID_VIA_82C586_0) { + switch(router->device) { + case PCI_DEVICE_ID_VIA_82C686: + /* + * Asus k7m bios wrongly reports 82C686A + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_82C686; + break; + case PCI_DEVICE_ID_VIA_8235: + /** + * Asus a7v-x bios wrongly reports 8235 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8235; + break; + } + } + + switch(device) { + case PCI_DEVICE_ID_VIA_82C586_0: + r->name = "VIA"; + r->get = pirq_via586_get; + r->set = pirq_via586_set; + return 1; + case PCI_DEVICE_ID_VIA_82C596: + case PCI_DEVICE_ID_VIA_82C686: + case PCI_DEVICE_ID_VIA_8231: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8237: + /* FIXME: add new ones for 8233/5 */ + r->name = "VIA"; + r->get = pirq_via_get; + r->set = pirq_via_set; + return 1; + } + return 0; +} + +static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_VLSI_82C534: + r->name = "VLSI 82C534"; + r->get = pirq_vlsi_get; + r->set = pirq_vlsi_set; + return 1; + } + return 0; +} + + +static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_SERVERWORKS_OSB4: + case PCI_DEVICE_ID_SERVERWORKS_CSB5: + r->name = "ServerWorks"; + r->get = pirq_serverworks_get; + r->set = pirq_serverworks_set; + return 1; + } + return 0; +} + +static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + if (device != PCI_DEVICE_ID_SI_503) + return 0; + + r->name = "SIS"; + r->get = pirq_sis_get; + r->set = pirq_sis_set; + return 1; +} + +static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_CYRIX_5520: + r->name = "NatSemi"; + r->get = pirq_cyrix_get; + r->set = pirq_cyrix_set; + return 1; + } + return 0; +} + +static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_OPTI_82C700: + r->name = "OPTI"; + r->get = pirq_opti_get; + r->set = pirq_opti_set; + return 1; + } + return 0; +} + +static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_ITE_IT8330G_0: + r->name = "ITE"; + r->get = pirq_ite_get; + r->set = pirq_ite_set; + return 1; + } + return 0; +} + +static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_AL_M1533: + case PCI_DEVICE_ID_AL_M1563: + printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n"); + r->name = "ALI"; + r->get = pirq_ali_get; + r->set = pirq_ali_set; + return 1; + } + return 0; +} + +static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch(device) + { + case PCI_DEVICE_ID_AMD_VIPER_740B: + r->name = "AMD756"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7413: + r->name = "AMD766"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7443: + r->name = "AMD768"; + break; + default: + return 0; + } + r->get = pirq_amd756_get; + r->set = pirq_amd756_set; + return 1; +} + +static __initdata struct irq_router_handler pirq_routers[] = { + { PCI_VENDOR_ID_INTEL, intel_router_probe }, + { PCI_VENDOR_ID_AL, ali_router_probe }, + { PCI_VENDOR_ID_ITE, ite_router_probe }, + { PCI_VENDOR_ID_VIA, via_router_probe }, + { PCI_VENDOR_ID_OPTI, opti_router_probe }, + { PCI_VENDOR_ID_SI, sis_router_probe }, + { PCI_VENDOR_ID_CYRIX, cyrix_router_probe }, + { PCI_VENDOR_ID_VLSI, vlsi_router_probe }, + { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe }, + { PCI_VENDOR_ID_AMD, amd_router_probe }, + /* Someone with docs needs to add the ATI Radeon IGP */ + { 0, NULL } +}; +static struct irq_router pirq_router; +static struct pci_dev *pirq_router_dev; + + +/* + * FIXME: should we have an option to say "generic for + * chipset" ? + */ + +static void __init pirq_find_router(struct irq_router *r) +{ + struct irq_routing_table *rt = pirq_table; + struct irq_router_handler *h; + +#ifdef CONFIG_PCI_BIOS + if (!rt->signature) { + printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n"); + r->set = pirq_bios_set; + r->name = "BIOS"; + return; + } +#endif + + /* Default unless a driver reloads it */ + r->name = "default"; + r->get = NULL; + r->set = NULL; + + DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n", + rt->rtr_vendor, rt->rtr_device); + + pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn); + if (!pirq_router_dev) { + DBG(KERN_DEBUG "PCI: Interrupt router not found at " + "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn); + return; + } + + for( h = pirq_routers; h->vendor; h++) { + /* First look for a router match */ + if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device)) + break; + /* Fall back to a device match */ + if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device)) + break; + } + printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n", + pirq_router.name, + pirq_router_dev->vendor, + pirq_router_dev->device, + pci_name(pirq_router_dev)); + + /* The device remains referenced for the kernel lifetime */ +} + +static struct irq_info *pirq_get_info(struct pci_dev *dev) +{ + struct irq_routing_table *rt = pirq_table; + int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); + struct irq_info *info; + + for (info = rt->slots; entries--; info++) + if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) + return info; + return NULL; +} + +static int pcibios_lookup_irq(struct pci_dev *dev, int assign) +{ + u8 pin; + struct irq_info *info; + int i, pirq, newirq; + int irq = 0; + u32 mask; + struct irq_router *r = &pirq_router; + struct pci_dev *dev2 = NULL; + char *msg = NULL; + + /* Find IRQ pin */ + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (!pin) { + DBG(KERN_DEBUG " -> no interrupt pin\n"); + return 0; + } + pin = pin - 1; + + /* Find IRQ routing entry */ + + if (!pirq_table) + return 0; + + DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin); + info = pirq_get_info(dev); + if (!info) { + DBG(" -> not found in routing table\n" KERN_DEBUG); + return 0; + } + pirq = info->irq[pin].link; + mask = info->irq[pin].bitmap; + if (!pirq) { + DBG(" -> not routed\n" KERN_DEBUG); + return 0; + } + DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs); + mask &= pcibios_irq_mask; + + /* Work around broken HP Pavilion Notebooks which assign USB to + IRQ 9 even though it is actually wired to IRQ 11 */ + + if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + r->set(pirq_router_dev, dev, pirq, 11); + } + + /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ + if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) { + pirq = 0x68; + mask = 0x400; + dev->irq = r->get(pirq_router_dev, dev, pirq); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Find the best IRQ to assign: use the one + * reported by the device if possible. + */ + newirq = dev->irq; + if (newirq && !((1 << newirq) & mask)) { + if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0; + else printk("\n" KERN_WARNING + "PCI: IRQ %i for device %s doesn't match PIRQ mask " + "- try pci=usepirqmask\n" KERN_DEBUG, newirq, + pci_name(dev)); + } + if (!newirq && assign) { + for (i = 0; i < 16; i++) { + if (!(mask & (1 << i))) + continue; + if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED)) + newirq = i; + } + } + DBG(" -> newirq=%d", newirq); + + /* Check if it is hardcoded */ + if ((pirq & 0xf0) == 0xf0) { + irq = pirq & 0xf; + DBG(" -> hardcoded IRQ %d\n", irq); + msg = "Hardcoded"; + } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ + ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) { + DBG(" -> got IRQ %d\n", irq); + msg = "Found"; + eisa_set_level_irq(irq); + } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { + DBG(" -> assigning IRQ %d", newirq); + if (r->set(pirq_router_dev, dev, pirq, newirq)) { + eisa_set_level_irq(newirq); + DBG(" ... OK\n"); + msg = "Assigned"; + irq = newirq; + } + } + + if (!irq) { + DBG(" ... failed\n"); + if (newirq && mask == (1 << newirq)) { + msg = "Guessed"; + irq = newirq; + } else + return 0; + } + printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev)); + + /* Update IRQ for all devices with the same pirq value */ + while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { + pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin); + if (!pin) + continue; + pin--; + info = pirq_get_info(dev2); + if (!info) + continue; + if (info->irq[pin].link == pirq) { + /* We refuse to override the dev->irq information. Give a warning! */ + if ( dev2->irq && dev2->irq != irq && \ + (!(pci_probe & PCI_USE_PIRQ_MASK) || \ + ((1 << dev2->irq) & mask)) ) { +#ifndef CONFIG_PCI_MSI + printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", + pci_name(dev2), dev2->irq, irq); +#endif + continue; + } + dev2->irq = irq; + pirq_penalty[irq]++; + if (dev != dev2) + printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2)); + } + } + return 1; +} + +static void __init pcibios_fixup_irqs(void) +{ + struct pci_dev *dev = NULL; + u8 pin; + + DBG(KERN_DEBUG "PCI: IRQ fixup\n"); + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + /* + * If the BIOS has set an out of range IRQ number, just ignore it. + * Also keep track of which IRQ's are already in use. + */ + if (dev->irq >= 16) { + DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq); + dev->irq = 0; + } + /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */ + if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000) + pirq_penalty[dev->irq] = 0; + pirq_penalty[dev->irq]++; + } + + dev = NULL; + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); +#ifdef CONFIG_X86_IO_APIC + /* + * Recalculate IRQ numbers if we use the I/O APIC. + */ + if (io_apic_assign_pci_irqs) + { + int irq; + + if (pin) { + pin--; /* interrupt pins are numbered starting from 1 */ + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + /* + * Busses behind bridges are typically not listed in the MP-table. + * In this case we have to look up the IRQ based on the parent bus, + * parent slot, and pin number. The SMP code detects such bridged + * busses itself so we should get into this branch reliably. + */ + if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ + struct pci_dev * bridge = dev->bus->self; + + pin = (pin + PCI_SLOT(dev->devfn)) % 4; + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + PCI_SLOT(bridge->devfn), pin); + if (irq >= 0) + printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", + pci_name(bridge), 'A' + pin, irq); + } + if (irq >= 0) { + printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", + pci_name(dev), 'A' + pin, irq); + dev->irq = irq; + } + } + } +#endif + /* + * Still no IRQ? Try to lookup one... + */ + if (pin && !dev->irq) + pcibios_lookup_irq(dev, 0); + } +} + +/* + * Work around broken HP Pavilion Notebooks which assign USB to + * IRQ 9 even though it is actually wired to IRQ 11 + */ +static int __init fix_broken_hp_bios_irq9(struct dmi_system_id *d) +{ + if (!broken_hp_bios_irq9) { + broken_hp_bios_irq9 = 1; + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident); + } + return 0; +} + +/* + * Work around broken Acer TravelMate 360 Notebooks which assign + * Cardbus to IRQ 11 even though it is actually wired to IRQ 10 + */ +static int __init fix_acer_tm360_irqrouting(struct dmi_system_id *d) +{ + if (!acer_tm360_irqrouting) { + acer_tm360_irqrouting = 1; + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident); + } + return 0; +} + +static struct dmi_system_id __initdata pciirq_dmi_table[] = { + { + .callback = fix_broken_hp_bios_irq9, + .ident = "HP Pavilion N5400 Series Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"), + DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), + }, + }, + { + .callback = fix_acer_tm360_irqrouting, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, + { } +}; + +static int __init pcibios_irq_init(void) +{ + DBG(KERN_DEBUG "PCI: IRQ init\n"); + + if (pcibios_enable_irq || raw_pci_ops == NULL) + return 0; + + dmi_check_system(pciirq_dmi_table); + + pirq_table = pirq_find_routing_table(); + +#ifdef CONFIG_PCI_BIOS + if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) + pirq_table = pcibios_get_irq_routing_table(); +#endif + if (pirq_table) { + pirq_peer_trick(); + pirq_find_router(&pirq_router); + if (pirq_table->exclusive_irqs) { + int i; + for (i=0; i<16; i++) + if (!(pirq_table->exclusive_irqs & (1 << i))) + pirq_penalty[i] += 100; + } + /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */ + if (io_apic_assign_pci_irqs) + pirq_table = NULL; + } + + pcibios_enable_irq = pirq_enable_irq; + + pcibios_fixup_irqs(); + return 0; +} + +subsys_initcall(pcibios_irq_init); + + +static void pirq_penalize_isa_irq(int irq, int active) +{ + /* + * If any ISAPnP device reports an IRQ in its list of possible + * IRQ's, we try to avoid assigning it to PCI devices. + */ + if (irq < 16) { + if (active) + pirq_penalty[irq] += 1000; + else + pirq_penalty[irq] += 100; + } +} + +void pcibios_penalize_isa_irq(int irq, int active) +{ +#ifdef CONFIG_ACPI + if (!acpi_noirq) + acpi_penalize_isa_irq(irq, active); + else +#endif + pirq_penalize_isa_irq(irq, active); +} + +static int pirq_enable_irq(struct pci_dev *dev) +{ + u8 pin; + struct pci_dev *temp_dev; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { + char *msg = ""; + + pin--; /* interrupt pins are numbered starting from 1 */ + + if (io_apic_assign_pci_irqs) { + int irq; + + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + /* + * Busses behind bridges are typically not listed in the MP-table. + * In this case we have to look up the IRQ based on the parent bus, + * parent slot, and pin number. The SMP code detects such bridged + * busses itself so we should get into this branch reliably. + */ + temp_dev = dev; + while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ + struct pci_dev * bridge = dev->bus->self; + + pin = (pin + PCI_SLOT(dev->devfn)) % 4; + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + PCI_SLOT(bridge->devfn), pin); + if (irq >= 0) + printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", + pci_name(bridge), 'A' + pin, irq); + dev = bridge; + } + dev = temp_dev; + if (irq >= 0) { + printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", + pci_name(dev), 'A' + pin, irq); + dev->irq = irq; + return 0; + } else + msg = " Probably buggy MP table."; + } else if (pci_probe & PCI_BIOS_IRQ_SCAN) + msg = ""; + else + msg = " Please try using pci=biosirq."; + + /* With IDE legacy devices the IRQ lookup failure is not a problem.. */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5)) + return 0; + + printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", + 'A' + pin, pci_name(dev), msg); + } + return 0; +} diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c new file mode 100644 index 00000000000..5565d7016b7 --- /dev/null +++ b/arch/x86/pci/legacy.c @@ -0,0 +1,56 @@ +/* + * legacy.c - traditional, old school PCI bus probing + */ +#include <linux/init.h> +#include <linux/pci.h> +#include "pci.h" + +/* + * Discover remaining PCI buses in case there are peer host bridges. + * We use the number of last PCI bus provided by the PCI BIOS. + */ +static void __devinit pcibios_fixup_peer_bridges(void) +{ + int n, devfn; + + if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) + return; + DBG("PCI: Peer bridge fixup\n"); + + for (n=0; n <= pcibios_last_bus; n++) { + u32 l; + if (pci_find_bus(0, n)) + continue; + for (devfn = 0; devfn < 256; devfn += 8) { + if (!raw_pci_ops->read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && + l != 0x0000 && l != 0xffff) { + DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); + printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); + pci_scan_bus_with_sysdata(n); + break; + } + } + } +} + +static int __init pci_legacy_init(void) +{ + if (!raw_pci_ops) { + printk("PCI: System does not support PCI\n"); + return 0; + } + + if (pcibios_scanned++) + return 0; + + printk("PCI: Probing PCI hardware\n"); + pci_root_bus = pcibios_scan_root(0); + if (pci_root_bus) + pci_bus_add_devices(pci_root_bus); + + pcibios_fixup_peer_bridges(); + + return 0; +} + +subsys_initcall(pci_legacy_init); diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c new file mode 100644 index 00000000000..4df637e34f8 --- /dev/null +++ b/arch/x86/pci/mmconfig-shared.c @@ -0,0 +1,315 @@ +/* + * mmconfig-shared.c - Low-level direct PCI config space access via + * MMCONFIG - common code between i386 and x86-64. + * + * This code does: + * - known chipset handling + * - ACPI decoding and validation + * + * Per-architecture code takes care of the mappings and accesses + * themselves. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/bitmap.h> +#include <asm/e820.h> + +#include "pci.h" + +/* aperture is up to 256MB but BIOS may reserve less */ +#define MMCONFIG_APER_MIN (2 * 1024*1024) +#define MMCONFIG_APER_MAX (256 * 1024*1024) + +DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +/* Indicate if the mmcfg resources have been placed into the resource table. */ +static int __initdata pci_mmcfg_resources_inserted; + +/* K8 systems have some devices (typically in the builtin northbridge) + that are only accessible using type1 + Normally this can be expressed in the MCFG by not listing them + and assigning suitable _SEGs, but this isn't implemented in some BIOS. + Instead try to discover all devices on bus 0 that are unreachable using MM + and fallback for them. */ +static void __init unreachable_devices(void) +{ + int i, bus; + /* Use the max bus number from ACPI here? */ + for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) { + for (i = 0; i < 32; i++) { + unsigned int devfn = PCI_DEVFN(i, 0); + u32 val1, val2; + + pci_conf1_read(0, bus, devfn, 0, 4, &val1); + if (val1 == 0xffffffff) + continue; + + if (pci_mmcfg_arch_reachable(0, bus, devfn)) { + raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); + if (val1 == val2) + continue; + } + set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); + printk(KERN_NOTICE "PCI: No mmconfig possible on device" + " %02x:%02x\n", bus, i); + } + } +} + +static const char __init *pci_mmcfg_e7520(void) +{ + u32 win; + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); + + win = win & 0xf000; + if(win == 0x0000 || win == 0xf000) + pci_mmcfg_config_num = 0; + else { + pci_mmcfg_config_num = 1; + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = win << 16; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = 255; + } + + return "Intel Corporation E7520 Memory Controller Hub"; +} + +static const char __init *pci_mmcfg_intel_945(void) +{ + u32 pciexbar, mask = 0, len = 0; + + pci_mmcfg_config_num = 1; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar); + + /* Enable bit */ + if (!(pciexbar & 1)) + pci_mmcfg_config_num = 0; + + /* Size bits */ + switch ((pciexbar >> 1) & 3) { + case 0: + mask = 0xf0000000U; + len = 0x10000000U; + break; + case 1: + mask = 0xf8000000U; + len = 0x08000000U; + break; + case 2: + mask = 0xfc000000U; + len = 0x04000000U; + break; + default: + pci_mmcfg_config_num = 0; + } + + /* Errata #2, things break when not aligned on a 256Mb boundary */ + /* Can only happen in 64M/128M mode */ + + if ((pciexbar & mask) & 0x0fffffffU) + pci_mmcfg_config_num = 0; + + /* Don't hit the APIC registers and their friends */ + if ((pciexbar & mask) >= 0xf0000000U) + pci_mmcfg_config_num = 0; + + if (pci_mmcfg_config_num) { + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = pciexbar & mask; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1; + } + + return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; +} + +struct pci_mmcfg_hostbridge_probe { + u32 vendor; + u32 device; + const char *(*probe)(void); +}; + +static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, +}; + +static int __init pci_mmcfg_check_hostbridge(void) +{ + u32 l; + u16 vendor, device; + int i; + const char *name; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l); + vendor = l & 0xffff; + device = (l >> 16) & 0xffff; + + pci_mmcfg_config_num = 0; + pci_mmcfg_config = NULL; + name = NULL; + + for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { + if (pci_mmcfg_probes[i].vendor == vendor && + pci_mmcfg_probes[i].device == device) + name = pci_mmcfg_probes[i].probe(); + } + + if (name) { + printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n", + name, pci_mmcfg_config_num ? "with" : "without"); + } + + return name != NULL; +} + +static void __init pci_mmcfg_insert_resources(unsigned long resource_flags) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i]; + num_buses = cfg->end_bus_number - cfg->start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + cfg->pci_segment); + res->start = cfg->address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | resource_flags; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } + + /* Mark that the resources have been inserted. */ + pci_mmcfg_resources_inserted = 1; +} + +static void __init pci_mmcfg_reject_broken(int type) +{ + typeof(pci_mmcfg_config[0]) *cfg; + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + cfg = &pci_mmcfg_config[0]; + + /* + * Handle more broken MCFG tables on Asus etc. + * They only contain a single entry for bus 0-0. + */ + if (pci_mmcfg_config_num == 1 && + cfg->pci_segment == 0 && + (cfg->start_bus_number | cfg->end_bus_number) == 0) { + printk(KERN_ERR "PCI: start and end of bus number is 0. " + "Rejected as broken MCFG.\n"); + goto reject; + } + + /* + * Only do this check when type 1 works. If it doesn't work + * assume we run on a Mac and always use MCFG + */ + if (type == 1 && !e820_all_mapped(cfg->address, + cfg->address + MMCONFIG_APER_MIN, + E820_RESERVED)) { + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" + " E820-reserved\n", cfg->address); + goto reject; + } + return; + +reject: + printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config = NULL; + pci_mmcfg_config_num = 0; +} + +void __init pci_mmcfg_init(int type) +{ + int known_bridge = 0; + + if ((pci_probe & PCI_PROBE_MMCONF) == 0) + return; + + if (type == 1 && pci_mmcfg_check_hostbridge()) + known_bridge = 1; + + if (!known_bridge) { + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + pci_mmcfg_reject_broken(type); + } + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + if (pci_mmcfg_arch_init()) { + if (type == 1) + unreachable_devices(); + if (known_bridge) + pci_mmcfg_insert_resources(IORESOURCE_BUSY); + pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + } else { + /* + * Signal not to attempt to insert mmcfg resources because + * the architecture mmcfg setup could not initialize. + */ + pci_mmcfg_resources_inserted = 1; + } +} + +static int __init pci_mmcfg_late_insert_resources(void) +{ + /* + * If resources are already inserted or we are not using MMCONFIG, + * don't insert the resources. + */ + if ((pci_mmcfg_resources_inserted == 1) || + (pci_probe & PCI_PROBE_MMCONF) == 0 || + (pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return 1; + + /* + * Attempt to insert the mmcfg resources but not with the busy flag + * marked so it won't cause request errors when __request_region is + * called. + */ + pci_mmcfg_insert_resources(0); + + return 0; +} + +/* + * Perform MMCONFIG resource insertion after PCI initialization to allow for + * misprogrammed MCFG tables that state larger sizes but actually conflict + * with other system resources. + */ +late_initcall(pci_mmcfg_late_insert_resources); diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c new file mode 100644 index 00000000000..1bf5816d34c --- /dev/null +++ b/arch/x86/pci/mmconfig_32.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2004 Matthew Wilcox <matthew@wil.cx> + * Copyright (C) 2004 Intel Corp. + * + * This code is released under the GNU General Public License version 2. + */ + +/* + * mmconfig.c - Low-level direct PCI config space access via MMCONFIG + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <asm/e820.h> +#include "pci.h" + +/* Assume systems with more busses have correct MCFG */ +#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) + +/* The base address of the last MMCONFIG device accessed */ +static u32 mmcfg_last_accessed_device; +static int mmcfg_last_accessed_cpu; + +/* + * Functions for accessing PCI configuration space with MMCONFIG accesses + */ +static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) +{ + struct acpi_mcfg_allocation *cfg; + int cfg_num; + + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) + return 0; + + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { + cfg = &pci_mmcfg_config[cfg_num]; + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && + (cfg->end_bus_number >= bus)) + return cfg->address; + } + + /* Fall back to type 0 */ + return 0; +} + +/* + * This is always called under pci_config_lock + */ +static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) +{ + u32 dev_base = base | (bus << 20) | (devfn << 12); + int cpu = smp_processor_id(); + if (dev_base != mmcfg_last_accessed_device || + cpu != mmcfg_last_accessed_cpu) { + mmcfg_last_accessed_device = dev_base; + mmcfg_last_accessed_cpu = cpu; + set_fixmap_nocache(FIX_PCIE_MCFG, dev_base); + } +} + +static int pci_mmcfg_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + unsigned long flags; + u32 base; + + if ((bus > 255) || (devfn > 255) || (reg > 4095)) { + *value = -1; + return -EINVAL; + } + + base = get_base_addr(seg, bus, devfn); + if (!base) + return pci_conf1_read(seg,bus,devfn,reg,len,value); + + spin_lock_irqsave(&pci_config_lock, flags); + + pci_exp_set_dev_base(base, bus, devfn); + + switch (len) { + case 1: + *value = mmio_config_readb(mmcfg_virt_addr + reg); + break; + case 2: + *value = mmio_config_readw(mmcfg_virt_addr + reg); + break; + case 4: + *value = mmio_config_readl(mmcfg_virt_addr + reg); + break; + } + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +static int pci_mmcfg_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + unsigned long flags; + u32 base; + + if ((bus > 255) || (devfn > 255) || (reg > 4095)) + return -EINVAL; + + base = get_base_addr(seg, bus, devfn); + if (!base) + return pci_conf1_write(seg,bus,devfn,reg,len,value); + + spin_lock_irqsave(&pci_config_lock, flags); + + pci_exp_set_dev_base(base, bus, devfn); + + switch (len) { + case 1: + mmio_config_writeb(mmcfg_virt_addr + reg, value); + break; + case 2: + mmio_config_writew(mmcfg_virt_addr + reg, value); + break; + case 4: + mmio_config_writel(mmcfg_virt_addr + reg, value); + break; + } + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +static struct pci_raw_ops pci_mmcfg = { + .read = pci_mmcfg_read, + .write = pci_mmcfg_write, +}; + +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) +{ + return get_base_addr(seg, bus, devfn) != 0; +} + +int __init pci_mmcfg_arch_init(void) +{ + printk(KERN_INFO "PCI: Using MMCONFIG\n"); + raw_pci_ops = &pci_mmcfg; + return 1; +} diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c new file mode 100644 index 00000000000..f5f165f69e0 --- /dev/null +++ b/arch/x86/pci/numa.c @@ -0,0 +1,135 @@ +/* + * numa.c - Low-level PCI access for NUMA-Q machines + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/nodemask.h> +#include "pci.h" + +#define BUS2QUAD(global) (mp_bus_id_to_node[global]) +#define BUS2LOCAL(global) (mp_bus_id_to_local[global]) +#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) + +#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ + (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) + +static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + unsigned long flags; + + if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) + return -EINVAL; + + spin_lock_irqsave(&pci_config_lock, flags); + + outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus)); + + switch (len) { + case 1: + *value = inb_quad(0xCFC + (reg & 3), BUS2QUAD(bus)); + break; + case 2: + *value = inw_quad(0xCFC + (reg & 2), BUS2QUAD(bus)); + break; + case 4: + *value = inl_quad(0xCFC, BUS2QUAD(bus)); + break; + } + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + unsigned long flags; + + if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) + return -EINVAL; + + spin_lock_irqsave(&pci_config_lock, flags); + + outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus)); + + switch (len) { + case 1: + outb_quad((u8)value, 0xCFC + (reg & 3), BUS2QUAD(bus)); + break; + case 2: + outw_quad((u16)value, 0xCFC + (reg & 2), BUS2QUAD(bus)); + break; + case 4: + outl_quad((u32)value, 0xCFC, BUS2QUAD(bus)); + break; + } + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return 0; +} + +#undef PCI_CONF1_MQ_ADDRESS + +static struct pci_raw_ops pci_direct_conf1_mq = { + .read = pci_conf1_mq_read, + .write = pci_conf1_mq_write +}; + + +static void __devinit pci_fixup_i450nx(struct pci_dev *d) +{ + /* + * i450NX -- Find and scan all secondary buses on all PXB's. + */ + int pxb, reg; + u8 busno, suba, subb; + int quad = BUS2QUAD(d->bus->number); + + printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d)); + reg = 0xd0; + for(pxb=0; pxb<2; pxb++) { + pci_read_config_byte(d, reg++, &busno); + pci_read_config_byte(d, reg++, &suba); + pci_read_config_byte(d, reg++, &subb); + DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); + if (busno) { + /* Bus A */ + pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno)); + } + if (suba < subb) { + /* Bus B */ + pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1)); + } + } + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); + +static int __init pci_numa_init(void) +{ + int quad; + + raw_pci_ops = &pci_direct_conf1_mq; + + if (pcibios_scanned++) + return 0; + + pci_root_bus = pcibios_scan_root(0); + if (pci_root_bus) + pci_bus_add_devices(pci_root_bus); + if (num_online_nodes() > 1) + for_each_online_node(quad) { + if (quad == 0) + continue; + printk("Scanning PCI bus %d for quad %d\n", + QUADLOCAL2BUS(quad,0), quad); + pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0)); + } + return 0; +} + +subsys_initcall(pci_numa_init); diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c new file mode 100644 index 00000000000..10ac8c316c4 --- /dev/null +++ b/arch/x86/pci/pcbios.c @@ -0,0 +1,492 @@ +/* + * BIOS32 and PCI BIOS handling. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include "pci.h" +#include "pci-functions.h" + + +/* BIOS32 signature: "_32_" */ +#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24)) + +/* PCI signature: "PCI " */ +#define PCI_SIGNATURE (('P' << 0) + ('C' << 8) + ('I' << 16) + (' ' << 24)) + +/* PCI service signature: "$PCI" */ +#define PCI_SERVICE (('$' << 0) + ('P' << 8) + ('C' << 16) + ('I' << 24)) + +/* PCI BIOS hardware mechanism flags */ +#define PCIBIOS_HW_TYPE1 0x01 +#define PCIBIOS_HW_TYPE2 0x02 +#define PCIBIOS_HW_TYPE1_SPEC 0x10 +#define PCIBIOS_HW_TYPE2_SPEC 0x20 + +/* + * This is the standard structure used to identify the entry point + * to the BIOS32 Service Directory, as documented in + * Standard BIOS 32-bit Service Directory Proposal + * Revision 0.4 May 24, 1993 + * Phoenix Technologies Ltd. + * Norwood, MA + * and the PCI BIOS specification. + */ + +union bios32 { + struct { + unsigned long signature; /* _32_ */ + unsigned long entry; /* 32 bit physical address */ + unsigned char revision; /* Revision level, 0 */ + unsigned char length; /* Length in paragraphs should be 01 */ + unsigned char checksum; /* All bytes must add up to zero */ + unsigned char reserved[5]; /* Must be zero */ + } fields; + char chars[16]; +}; + +/* + * Physical address of the service directory. I don't know if we're + * allowed to have more than one of these or not, so just in case + * we'll make pcibios_present() take a memory start parameter and store + * the array there. + */ + +static struct { + unsigned long address; + unsigned short segment; +} bios32_indirect = { 0, __KERNEL_CS }; + +/* + * Returns the entry point for the given service, NULL on error + */ + +static unsigned long bios32_service(unsigned long service) +{ + unsigned char return_code; /* %al */ + unsigned long address; /* %ebx */ + unsigned long length; /* %ecx */ + unsigned long entry; /* %edx */ + unsigned long flags; + + local_irq_save(flags); + __asm__("lcall *(%%edi); cld" + : "=a" (return_code), + "=b" (address), + "=c" (length), + "=d" (entry) + : "0" (service), + "1" (0), + "D" (&bios32_indirect)); + local_irq_restore(flags); + + switch (return_code) { + case 0: + return address + entry; + case 0x80: /* Not present */ + printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service); + return 0; + default: /* Shouldn't happen */ + printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n", + service, return_code); + return 0; + } +} + +static struct { + unsigned long address; + unsigned short segment; +} pci_indirect = { 0, __KERNEL_CS }; + +static int pci_bios_present; + +static int __devinit check_pcibios(void) +{ + u32 signature, eax, ebx, ecx; + u8 status, major_ver, minor_ver, hw_mech; + unsigned long flags, pcibios_entry; + + if ((pcibios_entry = bios32_service(PCI_SERVICE))) { + pci_indirect.address = pcibios_entry + PAGE_OFFSET; + + local_irq_save(flags); + __asm__( + "lcall *(%%edi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=d" (signature), + "=a" (eax), + "=b" (ebx), + "=c" (ecx) + : "1" (PCIBIOS_PCI_BIOS_PRESENT), + "D" (&pci_indirect) + : "memory"); + local_irq_restore(flags); + + status = (eax >> 8) & 0xff; + hw_mech = eax & 0xff; + major_ver = (ebx >> 8) & 0xff; + minor_ver = ebx & 0xff; + if (pcibios_last_bus < 0) + pcibios_last_bus = ecx & 0xff; + DBG("PCI: BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n", + status, hw_mech, major_ver, minor_ver, pcibios_last_bus); + if (status || signature != PCI_SIGNATURE) { + printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n", + status, signature); + return 0; + } + printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n", + major_ver, minor_ver, pcibios_entry, pcibios_last_bus); +#ifdef CONFIG_PCI_DIRECT + if (!(hw_mech & PCIBIOS_HW_TYPE1)) + pci_probe &= ~PCI_PROBE_CONF1; + if (!(hw_mech & PCIBIOS_HW_TYPE2)) + pci_probe &= ~PCI_PROBE_CONF2; +#endif + return 1; + } + return 0; +} + +static int __devinit pci_bios_find_device (unsigned short vendor, unsigned short device_id, + unsigned short index, unsigned char *bus, unsigned char *device_fn) +{ + unsigned short bx; + unsigned short ret; + + __asm__("lcall *(%%edi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=b" (bx), + "=a" (ret) + : "1" (PCIBIOS_FIND_PCI_DEVICE), + "c" (device_id), + "d" (vendor), + "S" ((int) index), + "D" (&pci_indirect)); + *bus = (bx >> 8) & 0xff; + *device_fn = bx & 0xff; + return (int) (ret & 0xff00) >> 8; +} + +static int pci_bios_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + unsigned long result = 0; + unsigned long flags; + unsigned long bx = (bus << 8) | devfn; + + if (!value || (bus > 255) || (devfn > 255) || (reg > 255)) + return -EINVAL; + + spin_lock_irqsave(&pci_config_lock, flags); + + switch (len) { + case 1: + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=c" (*value), + "=a" (result) + : "1" (PCIBIOS_READ_CONFIG_BYTE), + "b" (bx), + "D" ((long)reg), + "S" (&pci_indirect)); + break; + case 2: + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=c" (*value), + "=a" (result) + : "1" (PCIBIOS_READ_CONFIG_WORD), + "b" (bx), + "D" ((long)reg), + "S" (&pci_indirect)); + break; + case 4: + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=c" (*value), + "=a" (result) + : "1" (PCIBIOS_READ_CONFIG_DWORD), + "b" (bx), + "D" ((long)reg), + "S" (&pci_indirect)); + break; + } + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return (int)((result & 0xff00) >> 8); +} + +static int pci_bios_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + unsigned long result = 0; + unsigned long flags; + unsigned long bx = (bus << 8) | devfn; + + if ((bus > 255) || (devfn > 255) || (reg > 255)) + return -EINVAL; + + spin_lock_irqsave(&pci_config_lock, flags); + + switch (len) { + case 1: + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=a" (result) + : "0" (PCIBIOS_WRITE_CONFIG_BYTE), + "c" (value), + "b" (bx), + "D" ((long)reg), + "S" (&pci_indirect)); + break; + case 2: + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=a" (result) + : "0" (PCIBIOS_WRITE_CONFIG_WORD), + "c" (value), + "b" (bx), + "D" ((long)reg), + "S" (&pci_indirect)); + break; + case 4: + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=a" (result) + : "0" (PCIBIOS_WRITE_CONFIG_DWORD), + "c" (value), + "b" (bx), + "D" ((long)reg), + "S" (&pci_indirect)); + break; + } + + spin_unlock_irqrestore(&pci_config_lock, flags); + + return (int)((result & 0xff00) >> 8); +} + + +/* + * Function table for BIOS32 access + */ + +static struct pci_raw_ops pci_bios_access = { + .read = pci_bios_read, + .write = pci_bios_write +}; + +/* + * Try to find PCI BIOS. + */ + +static struct pci_raw_ops * __devinit pci_find_bios(void) +{ + union bios32 *check; + unsigned char sum; + int i, length; + + /* + * Follow the standard procedure for locating the BIOS32 Service + * directory by scanning the permissible address range from + * 0xe0000 through 0xfffff for a valid BIOS32 structure. + */ + + for (check = (union bios32 *) __va(0xe0000); + check <= (union bios32 *) __va(0xffff0); + ++check) { + long sig; + if (probe_kernel_address(&check->fields.signature, sig)) + continue; + + if (check->fields.signature != BIOS32_SIGNATURE) + continue; + length = check->fields.length * 16; + if (!length) + continue; + sum = 0; + for (i = 0; i < length ; ++i) + sum += check->chars[i]; + if (sum != 0) + continue; + if (check->fields.revision != 0) { + printk("PCI: unsupported BIOS32 revision %d at 0x%p\n", + check->fields.revision, check); + continue; + } + DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check); + if (check->fields.entry >= 0x100000) { + printk("PCI: BIOS32 entry (0x%p) in high memory, " + "cannot use.\n", check); + return NULL; + } else { + unsigned long bios32_entry = check->fields.entry; + DBG("PCI: BIOS32 Service Directory entry at 0x%lx\n", + bios32_entry); + bios32_indirect.address = bios32_entry + PAGE_OFFSET; + if (check_pcibios()) + return &pci_bios_access; + } + break; /* Hopefully more than one BIOS32 cannot happen... */ + } + + return NULL; +} + +/* + * Sort the device list according to PCI BIOS. Nasty hack, but since some + * fool forgot to define the `correct' device order in the PCI BIOS specs + * and we want to be (possibly bug-to-bug ;-]) compatible with older kernels + * which used BIOS ordering, we are bound to do this... + */ + +void __devinit pcibios_sort(void) +{ + LIST_HEAD(sorted_devices); + struct list_head *ln; + struct pci_dev *dev, *d; + int idx, found; + unsigned char bus, devfn; + + DBG("PCI: Sorting device list...\n"); + while (!list_empty(&pci_devices)) { + ln = pci_devices.next; + dev = pci_dev_g(ln); + idx = found = 0; + while (pci_bios_find_device(dev->vendor, dev->device, idx, &bus, &devfn) == PCIBIOS_SUCCESSFUL) { + idx++; + list_for_each(ln, &pci_devices) { + d = pci_dev_g(ln); + if (d->bus->number == bus && d->devfn == devfn) { + list_move_tail(&d->global_list, &sorted_devices); + if (d == dev) + found = 1; + break; + } + } + if (ln == &pci_devices) { + printk(KERN_WARNING "PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn); + /* + * We must not continue scanning as several buggy BIOSes + * return garbage after the last device. Grr. + */ + break; + } + } + if (!found) { + printk(KERN_WARNING "PCI: Device %s not found by BIOS\n", + pci_name(dev)); + list_move_tail(&dev->global_list, &sorted_devices); + } + } + list_splice(&sorted_devices, &pci_devices); +} + +/* + * BIOS Functions for IRQ Routing + */ + +struct irq_routing_options { + u16 size; + struct irq_info *table; + u16 segment; +} __attribute__((packed)); + +struct irq_routing_table * pcibios_get_irq_routing_table(void) +{ + struct irq_routing_options opt; + struct irq_routing_table *rt = NULL; + int ret, map; + unsigned long page; + + if (!pci_bios_present) + return NULL; + page = __get_free_page(GFP_KERNEL); + if (!page) + return NULL; + opt.table = (struct irq_info *) page; + opt.size = PAGE_SIZE; + opt.segment = __KERNEL_DS; + + DBG("PCI: Fetching IRQ routing table... "); + __asm__("push %%es\n\t" + "push %%ds\n\t" + "pop %%es\n\t" + "lcall *(%%esi); cld\n\t" + "pop %%es\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=a" (ret), + "=b" (map), + "=m" (opt) + : "0" (PCIBIOS_GET_ROUTING_OPTIONS), + "1" (0), + "D" ((long) &opt), + "S" (&pci_indirect), + "m" (opt) + : "memory"); + DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map); + if (ret & 0xff00) + printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff); + else if (opt.size) { + rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL); + if (rt) { + memset(rt, 0, sizeof(struct irq_routing_table)); + rt->size = opt.size + sizeof(struct irq_routing_table); + rt->exclusive_irqs = map; + memcpy(rt->slots, (void *) page, opt.size); + printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n"); + } + } + free_page(page); + return rt; +} +EXPORT_SYMBOL(pcibios_get_irq_routing_table); + +int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq) +{ + int ret; + + __asm__("lcall *(%%esi); cld\n\t" + "jc 1f\n\t" + "xor %%ah, %%ah\n" + "1:" + : "=a" (ret) + : "0" (PCIBIOS_SET_PCI_HW_INT), + "b" ((dev->bus->number << 8) | dev->devfn), + "c" ((irq << 8) | (pin + 10)), + "S" (&pci_indirect)); + return !(ret & 0xff00); +} +EXPORT_SYMBOL(pcibios_set_irq_routing); + +void __init pci_pcbios_init(void) +{ + if ((pci_probe & PCI_PROBE_BIOS) + && ((raw_pci_ops = pci_find_bios()))) { + pci_probe |= PCI_BIOS_SORT; + pci_bios_present = 1; + } +} + diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h new file mode 100644 index 00000000000..8c66f275756 --- /dev/null +++ b/arch/x86/pci/pci.h @@ -0,0 +1,149 @@ +/* + * Low-Level PCI Access for i386 machines. + * + * (c) 1999 Martin Mares <mj@ucw.cz> + */ + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define PCI_PROBE_BIOS 0x0001 +#define PCI_PROBE_CONF1 0x0002 +#define PCI_PROBE_CONF2 0x0004 +#define PCI_PROBE_MMCONF 0x0008 +#define PCI_PROBE_MASK 0x000f +#define PCI_PROBE_NOEARLY 0x0010 + +#define PCI_NO_SORT 0x0100 +#define PCI_BIOS_SORT 0x0200 +#define PCI_NO_CHECKS 0x0400 +#define PCI_USE_PIRQ_MASK 0x0800 +#define PCI_ASSIGN_ROMS 0x1000 +#define PCI_BIOS_IRQ_SCAN 0x2000 +#define PCI_ASSIGN_ALL_BUSSES 0x4000 + +extern unsigned int pci_probe; +extern unsigned long pirq_table_addr; + +enum pci_bf_sort_state { + pci_bf_sort_default, + pci_force_nobf, + pci_force_bf, + pci_dmi_bf, +}; + +/* pci-i386.c */ + +extern unsigned int pcibios_max_latency; + +void pcibios_resource_survey(void); +int pcibios_enable_resources(struct pci_dev *, int); + +/* pci-pc.c */ + +extern int pcibios_last_bus; +extern struct pci_bus *pci_root_bus; +extern struct pci_ops pci_root_ops; + +/* pci-irq.c */ + +struct irq_info { + u8 bus, devfn; /* Bus, device and function */ + struct { + u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ + u16 bitmap; /* Available IRQs */ + } __attribute__((packed)) irq[4]; + u8 slot; /* Slot number, 0=onboard */ + u8 rfu; +} __attribute__((packed)); + +struct irq_routing_table { + u32 signature; /* PIRQ_SIGNATURE should be here */ + u16 version; /* PIRQ_VERSION */ + u16 size; /* Table size in bytes */ + u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ + u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ + u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ + u32 miniport_data; /* Crap */ + u8 rfu[11]; + u8 checksum; /* Modulo 256 checksum must give zero */ + struct irq_info slots[0]; +} __attribute__((packed)); + +extern unsigned int pcibios_irq_mask; + +extern int pcibios_scanned; +extern spinlock_t pci_config_lock; + +extern int (*pcibios_enable_irq)(struct pci_dev *dev); +extern void (*pcibios_disable_irq)(struct pci_dev *dev); + +extern int pci_conf1_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value); +extern int pci_conf1_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value); + +extern int pci_direct_probe(void); +extern void pci_direct_init(int type); +extern void pci_pcbios_init(void); +extern void pci_mmcfg_init(int type); +extern void pcibios_sort(void); + +/* pci-mmconfig.c */ + +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ +#define PCI_MMCFG_MAX_CHECK_BUS 16 +extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn); +extern int __init pci_mmcfg_arch_init(void); + +/* + * AMD Fam10h CPUs are buggy, and cannot access MMIO config space + * on their northbrige except through the * %eax register. As such, you MUST + * NOT use normal IOMEM accesses, you need to only use the magic mmio-config + * accessor functions. + * In fact just use pci_config_*, nothing else please. + */ +static inline unsigned char mmio_config_readb(void __iomem *pos) +{ + u8 val; + asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos)); + return val; +} + +static inline unsigned short mmio_config_readw(void __iomem *pos) +{ + u16 val; + asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos)); + return val; +} + +static inline unsigned int mmio_config_readl(void __iomem *pos) +{ + u32 val; + asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos)); + return val; +} + +static inline void mmio_config_writeb(void __iomem *pos, u8 val) +{ + asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory"); +} + +static inline void mmio_config_writew(void __iomem *pos, u16 val) +{ + asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory"); +} + +static inline void mmio_config_writel(void __iomem *pos, u32 val) +{ + asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory"); +} diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c new file mode 100644 index 00000000000..8ecb1c72259 --- /dev/null +++ b/arch/x86/pci/visws.c @@ -0,0 +1,111 @@ +/* + * Low-Level PCI Support for SGI Visual Workstation + * + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include "cobalt.h" +#include "lithium.h" + +#include "pci.h" + + +extern struct pci_raw_ops pci_direct_conf1; + +static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } +static void pci_visws_disable_irq(struct pci_dev *dev) { } + +int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; +void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; + +void __init pcibios_penalize_isa_irq(int irq, int active) {} + + +unsigned int pci_bus0, pci_bus1; + +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static u8 __init visws_swizzle(struct pci_dev *dev, u8 *pinp) +{ + u8 pin = *pinp; + + while (dev->bus->self) { /* Move up the chain of bridges. */ + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); + dev = dev->bus->self; + } + *pinp = pin; + + return PCI_SLOT(dev->devfn); +} + +static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq, bus = dev->bus->number; + + pin--; + + /* Nothing useful at PIIX4 pin 1 */ + if (bus == pci_bus0 && slot == 4 && pin == 0) + return -1; + + /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */ + if (bus == pci_bus0 && slot == 4 && pin == 3) { + irq = CO_IRQ(CO_APIC_PIIX4_USB); + goto out; + } + + /* First pin spread down 1 APIC entry per slot */ + if (pin == 0) { + irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 : + CO_APIC_PCIA_BASE0) + slot); + goto out; + } + + /* lines 1,2,3 from any slot is shared in this twirly pattern */ + if (bus == pci_bus1) { + /* lines 1-3 from devices 0 1 rotate over 2 apic entries */ + irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2)); + } else { /* bus == pci_bus0 */ + /* lines 1-3 from devices 0-3 rotate over 3 apic entries */ + if (slot == 0) + slot = 3; /* same pattern */ + irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3)); + } +out: + printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq); + return irq; +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +static int __init pcibios_init(void) +{ + /* The VISWS supports configuration access type 1 only */ + pci_probe = (pci_probe | PCI_PROBE_CONF1) & + ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2); + + pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff; + pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff; + + printk(KERN_INFO "PCI: Lithium bridge A bus: %u, " + "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0); + + raw_pci_ops = &pci_direct_conf1; + pci_scan_bus_with_sysdata(pci_bus0); + pci_scan_bus_with_sysdata(pci_bus1); + pci_fixup_irqs(visws_swizzle, visws_map_irq); + pcibios_resource_survey(); + return 0; +} + +subsys_initcall(pcibios_init); |