diff options
Diffstat (limited to 'arch/x86_64/kernel/nmi.c')
-rw-r--r-- | arch/x86_64/kernel/nmi.c | 248 |
1 files changed, 175 insertions, 73 deletions
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 61de0b34a01..31c0f2e6ac9 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -33,6 +33,7 @@ #include <asm/msr.h> #include <asm/proto.h> #include <asm/kdebug.h> +#include <asm/local.h> /* * lapic_nmi_owner tracks the ownership of the lapic NMI hardware: @@ -59,7 +60,8 @@ int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; -unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ +static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ +static unsigned int nmi_p4_cccr_val; /* Note that these events don't tick when the CPU idles. This means the frequency varies with CPU load. */ @@ -71,61 +73,87 @@ unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 #define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING -#define P6_EVNTSEL0_ENABLE (1 << 22) -#define P6_EVNTSEL_INT (1 << 20) -#define P6_EVNTSEL_OS (1 << 17) -#define P6_EVNTSEL_USR (1 << 16) -#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 -#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED +#define MSR_P4_MISC_ENABLE 0x1A0 +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) +#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12) +#define MSR_P4_PERFCTR0 0x300 +#define MSR_P4_CCCR0 0x360 +#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) +#define P4_ESCR_OS (1<<3) +#define P4_ESCR_USR (1<<2) +#define P4_CCCR_OVF_PMI0 (1<<26) +#define P4_CCCR_OVF_PMI1 (1<<27) +#define P4_CCCR_THRESHOLD(N) ((N)<<20) +#define P4_CCCR_COMPLEMENT (1<<19) +#define P4_CCCR_COMPARE (1<<18) +#define P4_CCCR_REQUIRED (3<<16) +#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) +#define P4_CCCR_ENABLE (1<<12) +/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + CRU_ESCR0 (with any non-null event selector) through a complemented + max threshold. [IA32-Vol3, Section 14.9.9] */ +#define MSR_P4_IQ_COUNTER0 0x30C +#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR) +#define P4_NMI_IQ_CCCR0 \ + (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ + P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) + +static __init inline int nmi_known_cpu(void) +{ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return boot_cpu_data.x86 == 15; + case X86_VENDOR_INTEL: + return boot_cpu_data.x86 == 15; + } + return 0; +} /* Run after command line and cpu_init init, but before all other checks */ void __init nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; - - /* For some reason the IO APIC watchdog doesn't work on the AMD - 8111 chipset. For now switch to local APIC mode using - perfctr0 there. On Intel CPUs we don't have code to handle - the perfctr and the IO-APIC seems to work, so use that. */ - - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO - "Using local APIC NMI watchdog using perfctr0\n"); - } else { - printk(KERN_INFO "Using IO APIC NMI watchdog\n"); + if (nmi_known_cpu()) + nmi_watchdog = NMI_LOCAL_APIC; + else nmi_watchdog = NMI_IO_APIC; - } } -/* Why is there no CPUID flag for this? */ -static __init int cpu_has_lapic(void) +#ifdef CONFIG_SMP +/* The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - case X86_VENDOR_AMD: - return boot_cpu_data.x86 >= 6; - /* .... add more cpus here or find a different way to figure this out. */ - default: - return 0; - } + volatile int *endflag = data; + local_irq_enable(); + /* Intentionally don't use cpu_relax here. This is + to make sure that the performance counter really ticks, + even if there is a simulator or similar that catches the + pause instruction. On a real HT machine this is fine because + all other CPUs are busy with "useless" delay loops and don't + care if they get somewhat less cycles. */ + while (*endflag == 0) + barrier(); } +#endif -static int __init check_nmi_watchdog (void) +int __init check_nmi_watchdog (void) { - int counts[NR_CPUS]; + volatile int endflag = 0; + int *counts; int cpu; - if (nmi_watchdog == NMI_NONE) - return 0; + counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!counts) + return -1; - if (nmi_watchdog == NMI_LOCAL_APIC && !cpu_has_lapic()) { - nmi_watchdog = NMI_NONE; - return -1; - } + printk(KERN_INFO "testing NMI watchdog ... "); - printk(KERN_INFO "Testing NMI watchdog ... "); + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); for (cpu = 0; cpu < NR_CPUS; cpu++) counts[cpu] = cpu_pda[cpu].__nmi_count; @@ -133,15 +161,22 @@ static int __init check_nmi_watchdog (void) mdelay((10*1000)/nmi_hz); // wait 10 ticks for (cpu = 0; cpu < NR_CPUS; cpu++) { + if (!cpu_online(cpu)) + continue; if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) { - printk("CPU#%d: NMI appears to be stuck (%d)!\n", + endflag = 1; + printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", cpu, + counts[cpu], cpu_pda[cpu].__nmi_count); nmi_active = 0; lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; + nmi_perfctr_msr = 0; + kfree(counts); return -1; } } + endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to @@ -149,10 +184,9 @@ static int __init check_nmi_watchdog (void) if (nmi_watchdog == NMI_LOCAL_APIC) nmi_hz = 1; + kfree(counts); return 0; } -/* Have this called later during boot so counters are updating */ -late_initcall(check_nmi_watchdog); int __init setup_nmi_watchdog(char *str) { @@ -170,7 +204,7 @@ int __init setup_nmi_watchdog(char *str) if (nmi >= NMI_INVALID) return 0; - nmi_watchdog = nmi; + nmi_watchdog = nmi; return 1; } @@ -185,7 +219,10 @@ static void disable_lapic_nmi_watchdog(void) wrmsr(MSR_K7_EVNTSEL0, 0, 0); break; case X86_VENDOR_INTEL: - wrmsr(MSR_IA32_EVNTSEL0, 0, 0); + if (boot_cpu_data.x86 == 15) { + wrmsr(MSR_P4_IQ_CCCR0, 0, 0); + wrmsr(MSR_P4_CRU_ESCR0, 0, 0); + } break; } nmi_active = -1; @@ -253,7 +290,7 @@ void enable_timer_nmi_watchdog(void) static int nmi_pm_active; /* nmi_active before suspend */ -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) +static int lapic_nmi_suspend(struct sys_device *dev, u32 state) { nmi_pm_active = nmi_active; disable_lapic_nmi_watchdog(); @@ -300,22 +337,27 @@ late_initcall(init_lapic_nmi_sysfs); * Original code written by Keith Owens. */ +static void clear_msr_range(unsigned int base, unsigned int n) +{ + unsigned int i; + + for(i = 0; i < n; ++i) + wrmsr(base+i, 0, 0); +} + static void setup_k7_watchdog(void) { int i; unsigned int evntsel; - /* No check, so can start with slow frequency */ - nmi_hz = 1; - - /* XXX should check these in EFER */ - nmi_perfctr_msr = MSR_K7_PERFCTR0; for(i = 0; i < 4; ++i) { /* Simulator may not support it */ - if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) + if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) { + nmi_perfctr_msr = 0; return; + } wrmsrl(MSR_K7_PERFCTR0+i, 0UL); } @@ -325,12 +367,54 @@ static void setup_k7_watchdog(void) | K7_NMI_EVENT; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz*1000) / nmi_hz); + wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); } + +static int setup_p4_watchdog(void) +{ + unsigned int misc_enable, dummy; + + rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy); + if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) + return 0; + + nmi_perfctr_msr = MSR_P4_IQ_COUNTER0; + nmi_p4_cccr_val = P4_NMI_IQ_CCCR0; +#ifdef CONFIG_SMP + if (smp_num_siblings == 2) + nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1; +#endif + + if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL)) + clear_msr_range(0x3F1, 2); + /* MSR 0x3F0 seems to have a default value of 0xFC00, but current + docs doesn't fully define it, so leave it alone for now. */ + if (boot_cpu_data.x86_model >= 0x3) { + /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */ + clear_msr_range(0x3A0, 26); + clear_msr_range(0x3BC, 3); + } else { + clear_msr_range(0x3A0, 31); + } + clear_msr_range(0x3C0, 6); + clear_msr_range(0x3C8, 6); + clear_msr_range(0x3E0, 2); + clear_msr_range(MSR_P4_CCCR0, 18); + clear_msr_range(MSR_P4_PERFCTR0, 18); + + wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); + wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); + Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000)); + wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1); + apic_write(APIC_LVTPC, APIC_DM_NMI); + wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); + return 1; +} + void setup_apic_nmi_watchdog(void) { switch (boot_cpu_data.x86_vendor) { @@ -341,6 +425,13 @@ void setup_apic_nmi_watchdog(void) return; setup_k7_watchdog(); break; + case X86_VENDOR_INTEL: + if (boot_cpu_data.x86 != 15) + return; + if (!setup_p4_watchdog()) + return; + break; + default: return; } @@ -355,56 +446,67 @@ void setup_apic_nmi_watchdog(void) * * as these watchdog NMI IRQs are generated on every CPU, we only * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] */ -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog (void) { int i; /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. */ for (i = 0; i < NR_CPUS; i++) - alert_counter[i] = 0; + per_cpu(nmi_touch, i) = 1; } void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) { - int sum, cpu; + int sum; + int touched = 0; - cpu = safe_smp_processor_id(); sum = read_pda(apic_timer_irqs); - if (last_irq_sums[cpu] == sum) { + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) { + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) { if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) { - alert_counter[cpu] = 0; + local_set(&__get_cpu_var(alert_counter), 0); return; } die_nmi("NMI Watchdog detected LOCKUP on CPU%d", regs); } } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); } - if (nmi_perfctr_msr) + if (nmi_perfctr_msr) { + if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) { + /* + * P4 quirks: + * - An overflown perfctr will assert its interrupt + * until the OVF flag in its CCCR is cleared. + * - LVTPC is masked on interrupt and must be + * unmasked by the LVTPC handler. + */ + wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); + apic_write(APIC_LVTPC, APIC_DM_NMI); + } wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1); + } } static int dummy_nmi_callback(struct pt_regs * regs, int cpu) |