5 files changed, 33 insertions, 33 deletions

diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c
index d259f8a6f81..419758f19ca 100644
--- a/arch/x86_64/ia32/ia32_ioctl.c
+++ b/arch/x86_64/ia32/ia32_ioctl.c
@@ -24,17 +24,26 @@
 static int tiocgdev(unsigned fd, unsigned cmd,  unsigned int __user *ptr) 
 { 
 
-	struct file *file = fget(fd);
+	struct file *file;
 	struct tty_struct *real_tty;
+	int fput_needed, ret;
 
+	file = fget_light(fd, &fput_needed);
 	if (!file)
 		return -EBADF;
+
+	ret = -EINVAL;
 	if (file->f_op->ioctl != tty_ioctl)
-		return -EINVAL; 
+		goto out;
 	real_tty = (struct tty_struct *)file->private_data;
 	if (!real_tty) 	
-		return -EINVAL; 
-	return put_user(new_encode_dev(tty_devnum(real_tty)), ptr); 
+		goto out;
+
+	ret = put_user(new_encode_dev(tty_devnum(real_tty)), ptr); 
+
+out:
+	fput_light(file, fput_needed);
+	return ret;
 } 
 
 #define RTC_IRQP_READ32	_IOR('p', 0x0b, unsigned int)	 /* Read IRQ rate   */
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index 116ac5f53dc..bb0ae18ec02 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -567,7 +567,7 @@ unsigned long pci_mem_start = 0xaeedbabe;
  */
 __init void e820_setup_gap(void)
 {
-	unsigned long gapstart, gapsize;
+	unsigned long gapstart, gapsize, round;
 	unsigned long last;
 	int i;
 	int found = 0;
@@ -604,14 +604,14 @@ __init void e820_setup_gap(void)
 	}
 
 	/*
-	 * Start allocating dynamic PCI memory a bit into the gap,
-	 * aligned up to the nearest megabyte.
-	 *
-	 * Question: should we try to pad it up a bit (do something
-	 * like " + (gapsize >> 3)" in there too?). We now have the
-	 * technology.
+	 * See how much we want to round up: start off with
+	 * rounding to the next 1MB area.
 	 */
-	pci_mem_start = (gapstart + 0xfffff) & ~0xfffff;
+	round = 0x100000;
+	while ((gapsize >> 4) > round)
+		round += round;
+	/* Fun with two's complement */
+	pci_mem_start = (gapstart + round) & -round;
 
 	printk(KERN_INFO "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
 		pci_mem_start, gapstart, gapsize);
diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c
index adc96282a9e..6d57da96bf8 100644
--- a/arch/x86_64/kernel/genapic_flat.c
+++ b/arch/x86_64/kernel/genapic_flat.c
@@ -78,8 +78,18 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
 
 static void flat_send_IPI_allbutself(int vector)
 {
+#ifndef CONFIG_HOTPLUG_CPU
 	if (((num_online_cpus()) - 1) >= 1)
 		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
+#else
+	cpumask_t allbutme = cpu_online_map;
+	int me = get_cpu(); /* Ensure we are not preempted when we clear */
+	cpu_clear(me, allbutme);
+
+	if (!cpus_empty(allbutme))
+		flat_send_IPI_mask(allbutme, vector);
+	put_cpu();
+#endif
 }
 
 static void flat_send_IPI_all(int vector)
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 40e0aca088f..5f1529be123 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1167,9 +1167,9 @@ void disable_IO_APIC(void)
 	clear_IO_APIC();
 
 	/*
-	 * If the i82559 is routed through an IOAPIC
+	 * If the i8259 is routed through an IOAPIC
 	 * Put that IOAPIC in virtual wire mode
-	 * so legacy interrups can be delivered.
+	 * so legacy interrupts can be delivered.
 	 */
 	pin = find_isa_irq_pin(0, mp_ExtINT);
 	if (pin != -1) {
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 90aeccd1519..4fb34b5cb1f 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -894,23 +894,6 @@ static __init void disable_smp(void)
 	cpu_set(0, cpu_core_map[0]);
 }
 
-/*
- * Handle user cpus=... parameter.
- */
-static __init void enforce_max_cpus(unsigned max_cpus)
-{
-	int i, k;
-	k = 0;
-	for (i = 0; i < NR_CPUS; i++) {
-		if (!cpu_possible(i))
-			continue;
-		if (++k > max_cpus) {
-			cpu_clear(i, cpu_possible_map);
-			cpu_clear(i, cpu_present_map);
-		}
-	}
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 /*
  * cpu_possible_map should be static, it cannot change as cpu's
@@ -999,8 +982,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
 
-	enforce_max_cpus(max_cpus);
-
 #ifdef CONFIG_HOTPLUG_CPU
 	prefill_possible_map();
 #endif