diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/configs/gta02_defconfig | 1692 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/Kconfig | 4 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/Makefile | 8 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/gta02-fiq.c | 144 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/gta02-pm-bt.c | 257 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/gta02-pm-gps.c | 241 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/gta02-pm-gsm.c | 300 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/gta02-pm-wlan.c | 201 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/include/mach/gta02-fiq.h | 9 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h | 10 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/include/mach/gta02.h | 6 | ||||
-rw-r--r-- | arch/arm/mach-s3c2442/mach-gta02.c | 504 |
14 files changed, 3369 insertions, 10 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aef63c8e3d2..be8ebe3760d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1455,6 +1455,8 @@ source "drivers/usb/Kconfig" source "drivers/uwb/Kconfig" +source "drivers/ar6000/Kconfig" + source "drivers/mmc/Kconfig" source "drivers/memstick/Kconfig" diff --git a/arch/arm/configs/gta02_defconfig b/arch/arm/configs/gta02_defconfig new file mode 100644 index 00000000000..c9b5cdf4d4a --- /dev/null +++ b/arch/arm/configs/gta02_defconfig @@ -0,0 +1,1692 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31 +# Fri Oct 9 11:35:24 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_FIQ=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_PLAT_S3C24XX=y +CONFIG_S3C2410_CLOCK=y +CONFIG_CPU_S3C244X=y +CONFIG_S3C24XX_PWM=y +CONFIG_S3C24XX_GPIO_EXTRA=64 +CONFIG_S3C24XX_GPIO_EXTRA64=y +CONFIG_S3C2410_DMA=y +# CONFIG_S3C2410_DMA_DEBUG is not set +# CONFIG_S3C24XX_ADC is not set +CONFIG_PLAT_S3C=y +CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y +CONFIG_CPU_LLSERIAL_S3C2440=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_WATCHDOG is not set +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y + +# +# Power management +# +# CONFIG_S3C2410_PM_DEBUG is not set +# CONFIG_S3C2410_PM_CHECK is not set +CONFIG_S3C_LOWLEVEL_UART_PORT=2 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_DMA=y +CONFIG_S3C_PWM=y +CONFIG_S3C_DEV_USB_HOST=y + +# +# S3C2400 Machines +# +CONFIG_CPU_S3C2410_DMA=y +CONFIG_S3C2410_PM=y +CONFIG_S3C2410_GPIO=y + +# +# S3C2410 Machines +# +# CONFIG_ARCH_SMDK2410 is not set +# CONFIG_ARCH_H1940 is not set +# CONFIG_MACH_N30 is not set +# CONFIG_ARCH_BAST is not set +# CONFIG_MACH_OTOM is not set +# CONFIG_MACH_AML_M5900 is not set +# CONFIG_MACH_TCT_HAMMER is not set +# CONFIG_MACH_VR1000 is not set +# CONFIG_MACH_QT2410 is not set + +# +# S3C2412 Machines +# +# CONFIG_MACH_JIVE is not set +# CONFIG_MACH_SMDK2413 is not set +# CONFIG_MACH_SMDK2412 is not set +# CONFIG_MACH_VSTMS is not set + +# +# S3C2440 Machines +# +# CONFIG_MACH_ANUBIS is not set +# CONFIG_MACH_OSIRIS is not set +# CONFIG_MACH_RX3715 is not set +# CONFIG_ARCH_S3C2440 is not set +# CONFIG_MACH_NEXCODER_2440 is not set +# CONFIG_MACH_AT2440EVB is not set +# CONFIG_MACH_MINI2440 is not set +CONFIG_CPU_S3C2442=y + +# +# S3C2442 Machines +# +CONFIG_MACH_NEO1973_GTA02=y + +# +# S3C2443 Machines +# +# CONFIG_MACH_SMDK2443 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=200 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="unused -- bootloader passes ATAG list" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +CONFIG_TCP_CONG_WESTWOOD=y +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DEFAULT_WESTWOOD=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="westwood" +CONFIG_TCP_MD5SIG=y +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=y +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=y +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +CONFIG_MTD_ABSENT=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_S3C2410=y +# CONFIG_MTD_NAND_S3C2410_DEBUG is not set +# CONFIG_MTD_NAND_S3C2410_HWECC is not set +# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_PCF50633_PMU=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=3 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C2440=y +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_S3C2410=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_S3C24XX=y +CONFIG_SPI_S3C24XX_GPIO=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_CHARGER_PCF50633=y +CONFIG_BATTERY_BQ27000_HDQ=y +CONFIG_HDQ_GPIO_BITBANG=y +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_S3C2410_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +CONFIG_MFD_PCF50633=y +CONFIG_PCF50633_ADC=y +CONFIG_PCF50633_GPIO=y +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_GLAMO=y +CONFIG_MFD_GLAMO_FB=y +CONFIG_MFD_GLAMO_GPIO=y +# CONFIG_MFD_GLAMO_MCI is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_TMIO is not set +# CONFIG_FB_S3C2410 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_LCD_JBT6K74=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +# CONFIG_BACKLIGHT_PWM is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=m +CONFIG_SND_S3C24XX_SOC=m +CONFIG_SND_S3C24XX_SOC_I2S=m +CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m +# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set +# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM8753=m +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y +# CONFIG_USB_S3C2410_DEBUG is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_AR6000_WLAN=y +# CONFIG_AR6000_WLAN_DEBUG is not set +# CONFIG_AR6000_WLAN_RESET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MMC_S3C is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_S3C24XX is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_GTA02_VIBRATOR=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_PCF50633=y + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_S3C=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_PCF50633=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +# CONFIG_INOTIFY_USER is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_S3C_UART=2 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_PCOMP=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_ZLIB=y +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index 103e913f225..8e37b9f42ab 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -33,6 +33,10 @@ config MACH_NEO1973_GTA02 select POWER_SUPPLY select MACH_NEO1973 select S3C2410_PWM + select S3C_DEV_USB_HOST + select FIQ + select S3C_PWM + select S3C24XX_GPIO_EXTRA64 help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile index 2a19113a576..cf39481cb5c 100644 --- a/arch/arm/mach-s3c2442/Makefile +++ b/arch/arm/mach-s3c2442/Makefile @@ -12,7 +12,11 @@ obj- := obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C2442) += clock.o -obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o - +obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \ + gta02-pm-bt.o \ + gta02-pm-gps.o \ + gta02-pm-gsm.o \ + gta02-pm-wlan.o \ + gta02-fiq.o # Machine support diff --git a/arch/arm/mach-s3c2442/gta02-fiq.c b/arch/arm/mach-s3c2442/gta02-fiq.c new file mode 100644 index 00000000000..2b46597c41e --- /dev/null +++ b/arch/arm/mach-s3c2442/gta02-fiq.c @@ -0,0 +1,144 @@ +#include <linux/kernel.h> + +#include <asm/fiq.h> +#include <plat/pwm.h> +#include <mach/regs-irq.h> +#include <mach/irqs.h> +#include <linux/io.h> +#include <linux/hdq.h> + +/* ------------------------------------------------------------------------------- + * GTA02 FIQ related + * + * Calls into vibrator and hdq and based on the return values + * determines if we the FIQ source be kept alive + */ + +#define DIVISOR_FROM_US(x) ((x) << 3) + +#ifdef CONFIG_HDQ_GPIO_BITBANG +#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US) +extern int hdq_fiq_handler(void); +#endif + +#ifdef CONFIG_LEDS_GTA02_VIBRATOR +#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100) +extern int gta02_vibrator_fiq_handler(void); +#endif + +/* Global data related to our fiq source */ +static uint32_t gta02_fiq_ack_mask; +static struct s3c2410_pwm gta02_fiq_pwm_timer; +static uint16_t gta02_fiq_timer_index; +static int gta02_fiq_irq; + +void gta02_fiq_handler(void) +{ + uint16_t divisor = 0xffff; + + /* disable further timer interrupts if nobody has any work + * or adjust rate according to who still has work + * + * CAUTION: it means forground code must disable FIQ around + * its own non-atomic S3C2410_INTMSK changes... not common + * thankfully and taken care of by the fiq-basis patch + */ + +#ifdef CONFIG_HDQ_GPIO_BITBANG + if (hdq_fiq_handler()) + divisor = FIQ_DIVISOR_HDQ; +#endif + +#ifdef CONFIG_LEDS_GTA02_VIBRATOR + if (gta02_vibrator_fiq_handler()) + divisor = FIQ_DIVISOR_VIBRATOR; +#endif + + if (divisor == 0xffff) /* mask the fiq irq source */ + __raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask, + S3C2410_INTMSK); + else /* still working, maybe at a different rate */ + __raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index)); + + __raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND); +} + +void gta02_fiq_kick(void) +{ + unsigned long flags; + uint32_t tcon; + + /* we have to take care about FIQ because this modification is + * non-atomic, FIQ could come in after the read and before the + * writeback and its changes to the register would be lost + * (platform INTMSK mod code is taken care of already) + */ + local_save_flags(flags); + local_fiq_disable(); + /* allow FIQs to resume */ + __raw_writel(__raw_readl(S3C2410_INTMSK) & + ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)), + S3C2410_INTMSK); + tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START; + /* fake the timer to a count of 1 */ + __raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index)); + __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON); + __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START, + S3C2410_TCON); + __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON); + local_irq_restore(flags); +} + +int gta02_fiq_enable(void) +{ + int irq_index_fiq = IRQ_TIMER3; + int rc = 0; + + local_fiq_disable(); + + gta02_fiq_irq = irq_index_fiq; + gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET); + gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0); + + /* set up the timer to operate as a pwm device */ + + rc = s3c2410_pwm_init(>a02_fiq_pwm_timer); + if (rc) + goto bail; + + gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index; + gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2; + gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2; + /* default rate == ~32us */ + gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000; + + rc = s3c2410_pwm_enable(>a02_fiq_pwm_timer); + if (rc) + goto bail; + + s3c2410_pwm_start(>a02_fiq_pwm_timer); + + /* let our selected interrupt be a magic FIQ interrupt */ + __raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD); + + /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */ + local_fiq_enable(); + + set_fiq_c_handler(gta02_fiq_handler); + + return 0; + +bail: + printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc); + + return rc; +} + +void gta02_fiq_disable(void) +{ + __raw_writel(0, S3C2410_INTMOD); + local_fiq_disable(); + gta02_fiq_irq = 0; /* no active source interrupt now either */ + +} +/* -------------------- /GTA02 FIQ Handler ------------------------------------- */ diff --git a/arch/arm/mach-s3c2442/gta02-pm-bt.c b/arch/arm/mach-s3c2442/gta02-pm-bt.c new file mode 100644 index 00000000000..76671ce96d0 --- /dev/null +++ b/arch/arm/mach-s3c2442/gta02-pm-bt.c @@ -0,0 +1,257 @@ +/* + * Bluetooth PM code for the Openmoko Freerunner GSM Phone + * + * (C) 2007 by Openmoko Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/rfkill.h> +#include <linux/err.h> +#include <mach/gpio-fns.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#include <mach/gta02.h> +#include <linux/mfd/pcf50633/gpio.h> + +#include <linux/regulator/consumer.h> + +#define DRVMSG "Openmoko Freerunner Bluetooth Power Management" + +struct gta02_pm_bt_data { + struct regulator *regulator; + struct rfkill *rfkill; + int pre_resume_state; +}; + +static ssize_t bt_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = 0; + if (!strcmp(attr->attr.name, "power_on")) { + if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN)) + ret = 1; + } else if (!strcmp(attr->attr.name, "reset")) { + if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0) + ret = 1; + } + + if (!ret) { + return strlcpy(buf, "0\n", 3); + } else { + return strlcpy(buf, "1\n", 3); + } +} + +static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on) +{ + struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev); + + dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on); + + bt_data = dev_get_drvdata(dev); + + s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on); + + if (on) { + if (!regulator_is_enabled(bt_data->regulator)) + regulator_enable(bt_data->regulator); + } else { + if (regulator_is_enabled(bt_data->regulator)) + regulator_disable(bt_data->regulator); + } + + s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on); +} + + +static int bt_rfkill_set_block(void *data, bool blocked) +{ + struct device *dev = data; + + __gta02_pm_bt_toggle_radio(dev, !blocked); + + return 0; +} + +static const struct rfkill_ops gta02_bt_rfkill_ops = { + .set_block = bt_rfkill_set_block, +}; + + +static ssize_t bt_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long on = simple_strtoul(buf, NULL, 10); + struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev); + + if (!strcmp(attr->attr.name, "power_on")) { + rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0); + + __gta02_pm_bt_toggle_radio(dev, on); + } else if (!strcmp(attr->attr.name, "reset")) { + /* reset is low-active, so we need to invert */ + s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1); + } + + return count; +} + +static DEVICE_ATTR(power_on, 0644, bt_read, bt_write); +static DEVICE_ATTR(reset, 0644, bt_read, bt_write); + +#ifdef CONFIG_PM +static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev); + + dev_dbg(&pdev->dev, DRVMSG ": suspending\n"); + + bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN); + __gta02_pm_bt_toggle_radio(&pdev->dev, 0); + + return 0; +} + +static int gta02_bt_resume(struct platform_device *pdev) +{ + struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev); + dev_dbg(&pdev->dev, DRVMSG ": resuming\n"); + + __gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state); + return 0; +} +#else +#define gta02_bt_suspend NULL +#define gta02_bt_resume NULL +#endif + +static struct attribute *gta02_bt_sysfs_entries[] = { + &dev_attr_power_on.attr, + &dev_attr_reset.attr, + NULL +}; + +static struct attribute_group gta02_bt_attr_group = { + .name = NULL, + .attrs = gta02_bt_sysfs_entries, +}; + +static int __init gta02_bt_probe(struct platform_device *pdev) +{ + struct rfkill *rfkill; + struct regulator *regulator; + struct gta02_pm_bt_data *bt_data; + int ret; + + dev_info(&pdev->dev, DRVMSG ": starting\n"); + + bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL); + dev_set_drvdata(&pdev->dev, bt_data); + + regulator = regulator_get(&pdev->dev, "BT_3V2"); + if (IS_ERR(regulator)) + return -ENODEV; + + bt_data->regulator = regulator; + + /* this tests the true physical state of the regulator... */ + if (regulator_is_enabled(regulator)) { + /* + * but these only operate on the logical state of the + * regulator... so we need to logicaly "adopt" it on + * to turn it off + */ + regulator_enable(regulator); + regulator_disable(regulator); + } + + /* we pull reset to low to make sure that the chip doesn't + * drain power through the reset line */ + s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0); + + rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH, + >a02_bt_rfkill_ops, &pdev->dev); + + if (!rfkill) { + dev_err(&pdev->dev, "Failed to allocate rfkill\n"); + return -ENOMEM; + } + + rfkill_init_sw_state(rfkill, 0); + + ret = rfkill_register(rfkill); + if (ret) { + rfkill_destroy(rfkill); + dev_err(&pdev->dev, "Failed to register rfkill\n"); + return ret; + } + + bt_data->rfkill = rfkill; + + return sysfs_create_group(&pdev->dev.kobj, >a02_bt_attr_group); +} + +static int gta02_bt_remove(struct platform_device *pdev) +{ + struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev); + struct regulator *regulator; + + sysfs_remove_group(&pdev->dev.kobj, >a02_bt_attr_group); + + if (bt_data->rfkill) { + rfkill_destroy(bt_data->rfkill); + } + + if (!bt_data || !bt_data->regulator) + return 0; + + regulator = bt_data->regulator; + + /* Make sure regulator is disabled before calling regulator_put */ + if (regulator_is_enabled(regulator)) + regulator_disable(regulator); + + regulator_put(regulator); + + kfree(bt_data); + + return 0; +} + +static struct platform_driver gta02_bt_driver = { + .probe = gta02_bt_probe, + .remove = gta02_bt_remove, + .suspend = gta02_bt_suspend, + .resume = gta02_bt_resume, + .driver = { + .name = "gta02-pm-bt", + }, +}; + +static int __devinit gta02_bt_init(void) +{ + return platform_driver_register(>a02_bt_driver); +} +module_init(gta02_bt_init); + +static void gta02_bt_exit(void) +{ + platform_driver_unregister(>a02_bt_driver); +} +module_exit(gta02_bt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); +MODULE_DESCRIPTION(DRVMSG); diff --git a/arch/arm/mach-s3c2442/gta02-pm-gps.c b/arch/arm/mach-s3c2442/gta02-pm-gps.c new file mode 100644 index 00000000000..02be4cec851 --- /dev/null +++ b/arch/arm/mach-s3c2442/gta02-pm-gps.c @@ -0,0 +1,241 @@ +/* + * GPS Power Management code for the Openmoko Freerunner GSM Phone + * + * (C) 2007-2009 by Openmoko Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/gpio-fns.h> + +#include <asm/mach-types.h> + +#include <mach/gta02.h> +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/pmic.h> + +#include <linux/regulator/consumer.h> +#include <linux/err.h> + +struct gta02_pm_gps_data { +#ifdef CONFIG_PM + int keep_on_in_suspend; +#endif + int power_was_on; + struct regulator *regulator; +}; + +static struct gta02_pm_gps_data gta02_gps; + +int gta02_pm_gps_is_on(void) +{ + return gta02_gps.power_was_on; +} +EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on); + +/* This is the POWERON pin */ +static void gps_pwron_set(int on) +{ + if (on) { + /* return UART pins to being UART pins */ + s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPH4_TXD1); + /* remove pulldown now it won't be floating any more */ + s3c2410_gpio_pullup(S3C2410_GPH(5), 0); + + if (!gta02_gps.power_was_on) + regulator_enable(gta02_gps.regulator); + } else { + /* + * take care not to power unpowered GPS from UART TX + * return them to GPIO and force low + */ + s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPH(4), 0); + /* don't let RX from unpowered GPS float */ + s3c2410_gpio_pullup(S3C2410_GPH(5), 1); + if (gta02_gps.power_was_on) + regulator_disable(gta02_gps.regulator); + } +} + +static int gps_pwron_get(void) +{ + return regulator_is_enabled(gta02_gps.regulator); +} + +#ifdef CONFIG_PM +/* This is the flag for keeping gps ON during suspend */ +static void gps_keep_on_in_suspend_set(int on) +{ + gta02_gps.keep_on_in_suspend = on; +} + +static int gps_keep_on_in_suspend_get(void) +{ + return gta02_gps.keep_on_in_suspend; +} +#endif + +static ssize_t power_gps_read(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret = 0; + + if (!strcmp(attr->attr.name, "power_on") || + !strcmp(attr->attr.name, "pwron")) { + ret = gps_pwron_get(); +#ifdef CONFIG_PM + } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) { + ret = gps_keep_on_in_suspend_get(); +#endif + } + if (ret) + return strlcpy(buf, "1\n", 3); + else + return strlcpy(buf, "0\n", 3); +} + +static ssize_t power_gps_write(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + unsigned long on = simple_strtoul(buf, NULL, 10); + + if (!strcmp(attr->attr.name, "power_on") || + !strcmp(attr->attr.name, "pwron")) { + gps_pwron_set(on); + gta02_gps.power_was_on = !!on; +#ifdef CONFIG_PM + } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) { + gps_keep_on_in_suspend_set(on); +#endif + } + return count; +} + +#ifdef CONFIG_PM +static int gta02_pm_gps_suspend(struct platform_device *pdev, + pm_message_t state) +{ + if (!gta02_gps.keep_on_in_suspend || + !gta02_gps.power_was_on) + gps_pwron_set(0); + else + dev_warn(&pdev->dev, "GTA02: keeping gps ON " + "during suspend\n"); + return 0; +} + +static int gta02_pm_gps_resume(struct platform_device *pdev) +{ + if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on) + gps_pwron_set(1); + + return 0; +} + +static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write); +#else +#define gta02_pm_gps_suspend NULL +#define gta02_pm_gps_resume NULL +#endif + +static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write); + +static struct attribute *gta02_gps_sysfs_entries[] = { + &dev_attr_power_on.attr, +#ifdef CONFIG_PM + &dev_attr_keep_on_in_suspend.attr, +#endif + NULL +}; + +static struct attribute_group gta02_gps_attr_group = { + .name = NULL, + .attrs = gta02_gps_sysfs_entries, +}; + +static int __init gta02_pm_gps_probe(struct platform_device *pdev) +{ + gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V"); + if (IS_ERR(gta02_gps.regulator)) { + dev_err(&pdev->dev, "probe failed %ld\n", + PTR_ERR(gta02_gps.regulator)); + + return PTR_ERR(gta02_gps.regulator); + } + + dev_info(&pdev->dev, "starting\n"); + + /* + * Here we should call the code that handles the set GPS power + * off action. But, the regulator API does not allow us to + * reassert regulator state, and when we read the regulator API + * logical state, it can differ from the actual state, So + * a workaround for this is to just set the regulator off in the + * PMU directly. Because that's different from normal flow, we + * have to reproduce other things from the OFF action here too. + */ + + /* + * u-boot enables LDO5 (GPS), which doesn't make sense and + * causes confusion. We therefore disable the regulator here. + */ + pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0); + + /* + * take care not to power unpowered GPS from UART TX + * return them to GPIO and force low + */ + s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPH(4), 0); + /* don't let RX from unpowered GPS float */ + s3c2410_gpio_pullup(S3C2410_GPH(5), 1); + + return sysfs_create_group(&pdev->dev.kobj, + >a02_gps_attr_group); +} + +static int gta02_pm_gps_remove(struct platform_device *pdev) +{ + regulator_put(gta02_gps.regulator); + sysfs_remove_group(&pdev->dev.kobj, >a02_gps_attr_group); + return 0; +} + +static struct platform_driver gta02_pm_gps_driver = { + .probe = gta02_pm_gps_probe, + .remove = gta02_pm_gps_remove, + .suspend = gta02_pm_gps_suspend, + .resume = gta02_pm_gps_resume, + .driver = { + .name = "gta02-pm-gps", + }, +}; + +static int __devinit gta02_pm_gps_init(void) +{ + return platform_driver_register(>a02_pm_gps_driver); +} +module_init(gta02_pm_gps_init); + +static void gta02_pm_gps_exit(void) +{ + platform_driver_unregister(>a02_pm_gps_driver); +} +module_exit(gta02_pm_gps_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); diff --git a/arch/arm/mach-s3c2442/gta02-pm-gsm.c b/arch/arm/mach-s3c2442/gta02-pm-gsm.c new file mode 100644 index 00000000000..bef8468dafe --- /dev/null +++ b/arch/arm/mach-s3c2442/gta02-pm-gsm.c @@ -0,0 +1,300 @@ +/* + * GSM Management code for the Openmoko Freerunner GSM Phone + * + * (C) 2007 by Openmoko Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/console.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <mach/gpio.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> + +#include <mach/gta02.h> +#include <linux/mfd/pcf50633/gpio.h> +#include <mach/regs-gpio.h> +#include <mach/regs-gpioj.h> + +/* FIXME: Add interrupt handler counting irqs or something */ +static int gta_gsm_interrupts; + +extern void s3c24xx_serial_console_set_silence(int); + +struct gta02pm_priv { + int gpio_ndl_gsm; + struct console *con; +}; + +static struct gta02pm_priv gta02_gsm; + +static struct console *find_s3c24xx_console(void) +{ + struct console *con; + + acquire_console_sem(); + + for (con = console_drivers; con; con = con->next) { + if (!strcmp(con->name, "ttySAC")) + break; + } + + release_console_sem(); + + return con; +} + +static ssize_t gsm_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + if (!strcmp(attr->attr.name, "power_on")) { + if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2)) + goto out_1; + } else if (!strcmp(attr->attr.name, "download")) { + if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM)) + goto out_1; + } else if (!strcmp(attr->attr.name, "flowcontrolled")) { + if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) + goto out_1; + } + + return strlcpy(buf, "0\n", 3); +out_1: + return strlcpy(buf, "1\n", 3); +} + +static void gsm_on_off(struct device *dev, int on) +{ + if (!on) { + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPIO_INPUT); + + pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0); + + if (gta02_gsm.con) { + s3c24xx_serial_console_set_silence(0); + console_start(gta02_gsm.con); + + dev_dbg(dev, "powered down gta02 GSM, enabling " + "serial console\n"); + } + + return; + } + + if (gta02_gsm.con) { + dev_dbg(dev, "powering up GSM, thus " + "disconnecting serial console\n"); + + console_stop(gta02_gsm.con); + s3c24xx_serial_console_set_silence(1); + } + + /* allow UART to talk to GSM side now we will power it */ + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0); + s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); + + pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7); + + msleep(100); + + s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 1); + msleep(500); + s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 0); + + /* + * workaround for calypso firmware moko10 and earlier, + * without this it will leave IRQ line high after + * booting + */ + s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); + msleep(1000); + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0); + +} + +static ssize_t gsm_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long on = simple_strtoul(buf, NULL, 10); + + if (!strcmp(attr->attr.name, "power_on")) { + gsm_on_off(dev, on); + + return count; + } + + if (!strcmp(attr->attr.name, "download")) { + /* + * the keyboard / buttons driver requests and enables + * the JACK_INSERT IRQ. We have to take care about + * not enabling and disabling the IRQ when it was + * already in that state or we get "unblanaced IRQ" + * kernel warnings and stack dumps. So we use the + * copy of the ndl_gsm state to figure out if we should + * enable or disable the jack interrupt + */ + if (on) { + if (gta02_gsm.gpio_ndl_gsm) + disable_irq(gpio_to_irq( + GTA02_GPIO_JACK_INSERT)); + } else { + if (!gta02_gsm.gpio_ndl_gsm) + enable_irq(gpio_to_irq( + GTA02_GPIO_JACK_INSERT)); + } + + gta02_gsm.gpio_ndl_gsm = !on; + s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on); + + return count; + } + + if (!strcmp(attr->attr.name, "flowcontrolled")) { + if (on) { + gta_gsm_interrupts = 0; + s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); + } else + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0); + } + + return count; +} + +static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write); +static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write); +static DEVICE_ATTR(download, 0644, gsm_read, gsm_write); +static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write); + +#ifdef CONFIG_PM + +static int gta02_gsm_resume(struct platform_device *pdev); +static int gta02_gsm_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we + * don't need to do much here. */ + + /* If flowcontrol asserted, abort if GSM already interrupted */ + if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) { + if (gta_gsm_interrupts) + goto busy; + } + + /* disable DL GSM to prevent jack_insert becoming 'floating' */ + s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1); + return 0; + +busy: + return -EBUSY; +} + +static int +gta02_gsm_suspend_late(struct platform_device *pdev, pm_message_t state) +{ + /* Last chance: abort if GSM already interrupted */ + if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) { + if (gta_gsm_interrupts) + return -EBUSY; + } + return 0; +} + +static int gta02_gsm_resume(struct platform_device *pdev) +{ + /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we + * don't need to do much here. */ + + /* Make sure that the kernel console on the serial port is still + * disabled. FIXME: resume ordering race with serial driver! */ + if (gta02_gsm.con && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_ON)) + console_stop(gta02_gsm.con); + + s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm); + + return 0; +} +#else +#define gta02_gsm_suspend NULL +#define gta02_gsm_suspend_late NULL +#define gta02_gsm_resume NULL +#endif /* CONFIG_PM */ + +static struct attribute *gta02_gsm_sysfs_entries[] = { + &dev_attr_power_on.attr, + &dev_attr_reset.attr, + &dev_attr_download.attr, + &dev_attr_flowcontrolled.attr, + NULL +}; + +static struct attribute_group gta02_gsm_attr_group = { + .name = NULL, + .attrs = gta02_gsm_sysfs_entries, +}; + +static int __init gta02_gsm_probe(struct platform_device *pdev) +{ + gta02_gsm.con = find_s3c24xx_console(); + if (!gta02_gsm.con) + dev_warn(&pdev->dev, + "cannot find S3C24xx console driver\n"); + + /* note that download initially disabled, and enforce that */ + gta02_gsm.gpio_ndl_gsm = 1; + s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1); + + /* GSM is to be initially off (at boot, or if this module inserted) */ + gsm_on_off(&pdev->dev, 0); + + return sysfs_create_group(&pdev->dev.kobj, >a02_gsm_attr_group); +} + +static int gta02_gsm_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, >a02_gsm_attr_group); + + return 0; +} + +static struct platform_driver gta02_gsm_driver = { + .probe = gta02_gsm_probe, + .remove = gta02_gsm_remove, + .suspend = gta02_gsm_suspend, + .suspend_late = gta02_gsm_suspend_late, + .resume = gta02_gsm_resume, + .driver = { + .name = "gta02-pm-gsm", + }, +}; + +static int __devinit gta02_gsm_init(void) +{ + return platform_driver_register(>a02_gsm_driver); +} +module_init(gta02_gsm_init); + +static void gta02_gsm_exit(void) +{ + platform_driver_unregister(>a02_gsm_driver); +} +module_exit(gta02_gsm_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); +MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management"); diff --git a/arch/arm/mach-s3c2442/gta02-pm-wlan.c b/arch/arm/mach-s3c2442/gta02-pm-wlan.c new file mode 100644 index 00000000000..6e0226600b1 --- /dev/null +++ b/arch/arm/mach-s3c2442/gta02-pm-wlan.c @@ -0,0 +1,201 @@ +/* + * GTA02 WLAN power management + * + * (C) 2008, 2009 by Openmoko Inc. + * Author: Andy Green <andy@openmoko.com> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#include <mach/gta02.h> +#include <mach/gta02-pm-wlan.h> +#include <mach/regs-gpio.h> +#include <mach/regs-gpioj.h> +#include <mach/gpio-fns.h> + +#include <linux/delay.h> +#include <linux/rfkill.h> + + +/* ----- Module hardware reset ("power") ----------------------------------- */ + + +void gta02_wlan_reset(int assert_reset) +{ + if (assert_reset) { + s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0); + msleep(200); /* probably excessive but we don't have specs */ + } else { + s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1); + } +} + +/* ----- rfkill ------------------------------------------------------------ */ + +/* + * S3C MCI handles suspend/resume through device removal/insertion. In order to + * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt, + * we therefore need to maintain rfkill state outside the driver. + * + * This platform driver is as good a place as any other. + */ + +static int (*gta02_wlan_rfkill_cb)(void *user, int on); +static void *gta02_wlan_rfkill_user; +static DEFINE_MUTEX(gta02_wlan_rfkill_lock); +static int gta02_wlan_rfkill_on; + +/* + * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the + * driver is ready to process rfkill callbacks. To prevent the state from + * changing until the driver has completed its initialization, we grab and hold + * the rfkill lock. + * + * A call to gta02_wlan_query_rfkill_lock must be followed by either + * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or + * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process. + */ + +int gta02_wlan_query_rfkill_lock(void) +{ + mutex_lock(>a02_wlan_rfkill_lock); + return gta02_wlan_rfkill_on; +} +EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock); + +void gta02_wlan_query_rfkill_unlock(void) +{ + mutex_unlock(>a02_wlan_rfkill_lock); +} +EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock); + +void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user) +{ + BUG_ON(!mutex_is_locked(>a02_wlan_rfkill_lock)); + BUG_ON(gta02_wlan_rfkill_cb); + gta02_wlan_rfkill_cb = cb; + gta02_wlan_rfkill_user = user; + mutex_unlock(>a02_wlan_rfkill_lock); +} +EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb); + +void gta02_wlan_clear_rfkill_cb(void) +{ + mutex_lock(>a02_wlan_rfkill_lock); + BUG_ON(!gta02_wlan_rfkill_cb); + gta02_wlan_rfkill_cb = NULL; + mutex_unlock(>a02_wlan_rfkill_lock); +} +EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb); + +static int gta02_wlan_set_radio_block(void *data, bool blocked) +{ + struct device *dev = data; + int res = 0; + + dev_dbg(dev, "gta02_wlan_toggle_radio: blocked %d (%p)\n", + blocked, gta02_wlan_rfkill_cb); + mutex_lock(>a02_wlan_rfkill_lock); + if (gta02_wlan_rfkill_cb) + res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, !blocked); + if (!res) + gta02_wlan_rfkill_on = !blocked; + mutex_unlock(>a02_wlan_rfkill_lock); + return res; +} + +static const struct rfkill_ops gta02_wlan_rfkill_ops = { + .set_block = gta02_wlan_set_radio_block, +}; + +/* ----- Initialization/removal -------------------------------------------- */ + + +static int __init gta02_wlan_probe(struct platform_device *pdev) +{ + /* default-on for now */ + const int default_state = 1; + struct rfkill *rfkill; + int ret; + + dev_info(&pdev->dev, "starting\n"); + + s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT); + gta02_wlan_reset(1); + gta02_wlan_reset(0); + + rfkill = rfkill_alloc("ar6000", &pdev->dev, RFKILL_TYPE_WLAN, + >a02_wlan_rfkill_ops, &pdev->dev); + + + if (!rfkill) { + dev_err(&pdev->dev, "Failed to allocate rfkill\n"); + return -ENOMEM; + } + + rfkill_init_sw_state(rfkill, default_state); + /* + * If the WLAN driver somehow managed to get activated before we're + * ready, the driver is now in an unknown state, which isn't something + * we're prepared to handle. This can't happen, so just fail hard. + */ + BUG_ON(gta02_wlan_rfkill_cb); + gta02_wlan_rfkill_on = default_state; + + ret = rfkill_register(rfkill); + if (ret) { + rfkill_destroy(rfkill); + dev_err(&pdev->dev, "Failed to register rfkill\n"); + return ret; + } + + dev_set_drvdata(&pdev->dev, rfkill); + + return 0; +} + +static int gta02_wlan_remove(struct platform_device *pdev) +{ + struct rfkill *rfkill = dev_get_drvdata(&pdev->dev); + + rfkill_destroy(rfkill); + + return 0; +} + +static struct platform_driver gta02_wlan_driver = { + .probe = gta02_wlan_probe, + .remove = gta02_wlan_remove, + .driver = { + .name = "gta02-pm-wlan", + }, +}; + +static int __devinit gta02_wlan_init(void) +{ + return platform_driver_register(>a02_wlan_driver); +} +module_init(gta02_wlan_init); + +static void gta02_wlan_exit(void) +{ + platform_driver_unregister(>a02_wlan_driver); +} +module_exit(gta02_wlan_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andy Green <andy@openmoko.com>"); +MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management"); diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h b/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h new file mode 100644 index 00000000000..90de3530595 --- /dev/null +++ b/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h @@ -0,0 +1,9 @@ +#ifndef __GTA02_FIQ_H +#define __GTA02_FIQ_H + +extern void gta02_fiq_handler(void); +extern void gta02_fiq_kick(void); +extern int gta02_fiq_enable(void); +extern void gta02_fiq_disable(void); + +#endif diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h new file mode 100644 index 00000000000..f15180ac079 --- /dev/null +++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h @@ -0,0 +1 @@ +extern int gta02_pm_gps_is_on(void); diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h new file mode 100644 index 00000000000..48369789709 --- /dev/null +++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h @@ -0,0 +1,10 @@ +#ifndef __MACH_GTA02_PM_WLAN_H +#define __MACH_GTA02_PM_WLAN_H + +void gta02_wlan_reset(int assert_reset); +int gta02_wlan_query_rfkill_lock(void); +void gta02_wlan_query_rfkill_unlock(void); +void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user); +void gta02_wlan_clear_rfkill_cb(void); + +#endif /* __MACH_GTA02_PM_WLAN_H */ diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h index 953331d8d56..b67e5ec2919 100644 --- a/arch/arm/mach-s3c2442/include/mach/gta02.h +++ b/arch/arm/mach-s3c2442/include/mach/gta02.h @@ -2,6 +2,7 @@ #define _GTA02_H #include <mach/regs-gpio.h> +#include <mach/regs-gpioj.h> /* Different hardware revisions, passed in ATAG_REVISION by u-boot */ #define GTA02v1_SYSTEM_REV 0x00000310 @@ -79,6 +80,11 @@ #define GTA02_PCB_ID2_0 S3C2410_GPD(3) #define GTA02_PCB_ID2_1 S3C2410_GPD(4) +#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END +#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + (x)) + int gta02_get_pcb_revision(void); +extern struct pcf50633 *gta02_pcf; + #endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index 0fb385bd9cd..8b52a26f7c2 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -38,6 +38,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> #include <linux/mmc/host.h> @@ -58,6 +59,11 @@ #include <linux/mfd/pcf50633/gpio.h> #include <linux/mfd/pcf50633/pmic.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/leds.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -85,9 +91,24 @@ #include <plat/pm.h> #include <plat/udc.h> #include <plat/gpio-cfg.h> +#include <plat/gpio-core.h> #include <plat/iic.h> -static struct pcf50633 *gta02_pcf; +#include <mach/gta02-pm-gps.h> +#include <mach/gta02-pm-wlan.h> + +#include <linux/jbt6k74.h> +#include <linux/glamofb.h> +#include <linux/mfd/glamo.h> + +#include <mach/gta02-fiq.h> + +#include <linux/hdq.h> +#include <linux/bq27000_battery.h> + +#include <linux/gta02-vibrator.h> + +struct pcf50633 *gta02_pcf; /* * This gets called every 1ms when we paniced. @@ -149,6 +170,140 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = { }, }; +/* + * we crank down SD Card clock dynamically when GPS is powered + */ + +static int gta02_glamo_mci_use_slow(void) +{ + return gta02_pm_gps_is_on(); +} + +static void gta02_glamo_external_reset(int level) +{ + s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level); + s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT); +} + +struct spi_gpio_platform_data spigpio_platform_data = { + .sck = GTA02_GPIO_GLAMO(10), + .mosi = GTA02_GPIO_GLAMO(11), + .miso = GTA02_GPIO_GLAMO(5), + .num_chipselect = 1, +}; + +static struct platform_device spigpio_device = { + .name = "spi_gpio", + .id = 2, + .dev = { + .platform_data = &spigpio_platform_data, + }, +}; + +static void gta02_glamo_registered(struct device *dev) +{ + spigpio_device.dev.parent = dev; + platform_device_register(&spigpio_device); +} + +static struct fb_videomode gta02_glamo_modes[] = { + { + .name = "480x640", + .xres = 480, + .yres = 640, + .pixclock = 40816, + .left_margin = 8, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 16, + .hsync_len = 8, + .vsync_len = 2, + .vmode = FB_VMODE_NONINTERLACED, + }, { + .name = "240x320", + .xres = 240, + .yres = 320, + .pixclock = 40816, + .left_margin = 8, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 16, + .hsync_len = 8, + .vsync_len = 2, + .vmode = FB_VMODE_NONINTERLACED, + } +}; + + +static struct glamo_fb_platform_data gta02_glamo_fb_pdata = { + .width = 43, + .height = 58, + + .num_modes = ARRAY_SIZE(gta02_glamo_modes), + .modes = gta02_glamo_modes, +}; + +static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = { + .glamo_mmc_use_slow = gta02_glamo_mci_use_slow, +}; + +static struct glamo_gpio_platform_data gta02_glamo_gpio_pdata = { + .base = GTA02_GPIO_GLAMO_BASE, + .registered = gta02_glamo_registered, +}; + +static struct glamo_platform_data gta02_glamo_pdata = { + .fb_data = >a02_glamo_fb_pdata, + .mmc_data = >a02_glamo_mmc_pdata, + .gpio_data = >a02_glamo_gpio_pdata, + + .osci_clock_rate = 32768, + + .glamo_external_reset = gta02_glamo_external_reset, +}; + +static struct resource gta02_glamo_resources[] = { + [0] = { + .start = S3C2410_CS1, + .end = S3C2410_CS1 + 0x1000000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = GTA02_IRQ_3D, + .end = GTA02_IRQ_3D, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = S3C2410_BOARD_IRQ_START, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gta02_glamo_dev = { + .name = "glamo3362", + .num_resources = ARRAY_SIZE(gta02_glamo_resources), + .resource = gta02_glamo_resources, + .dev = { + .platform_data = >a02_glamo_pdata, + }, +}; + +static struct platform_device gta02_pm_gps_dev = { + .name = "gta02-pm-gps", +}; + +static struct platform_device gta02_pm_bt_dev = { + .name = "gta02-pm-bt", +}; + +static struct platform_device gta02_pm_gsm_dev = { + .name = "gta02-pm-gsm", +}; + +static struct platform_device gta02_pm_wlan_dev = { + .name = "gta02-pm-wlan", +}; + #ifdef CONFIG_CHARGER_PCF50633 /* * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin. @@ -161,6 +316,20 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = { #define ADC_NOM_CHG_DETECT_1A 6 #define ADC_NOM_CHG_DETECT_USB 43 +static int gta02_get_charger_online_status(void) +{ + struct pcf50633 *pcf = gta02_pcf; + + return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE; +} + +static int gta02_get_charger_active_status(void) +{ + struct pcf50633 *pcf = gta02_pcf; + + return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE; +} + static void gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) { @@ -237,6 +406,8 @@ static void gta02_udc_vbus_draw(unsigned int ma) #else /* !CONFIG_CHARGER_PCF50633 */ #define gta02_pmu_event_callback NULL #define gta02_udc_vbus_draw NULL +#define gta02_get_charger_online_status NULL +#define gta02_get_charger_active_status NULL #endif /* @@ -254,6 +425,40 @@ static char *gta02_batteries[] = { "battery", }; +static struct regulator_consumer_supply ldo4_consumers[] = { + { + .dev = >a02_pm_bt_dev.dev, + .supply = "BT_3V2", + }, +}; + +static struct regulator_consumer_supply ldo5_consumers[] = { + { + .dev = >a02_pm_gps_dev.dev, + .supply = "RF_3V", + }, +}; + +static struct regulator_consumer_supply hcldo_consumers[] = { + { + .dev = >a02_glamo_dev.dev, + .supply = "SD_3V3", + }, +}; + +#if 0 +/* This will come with 2.6.32. Don't forget to uncomment it then. */ +static struct regulator_consumer_supply ldo6_consumers[] = { + REGULATOR_SUPPLY("VDC", "jbt6k74"), + REGULATOR_SUPPLY("VDDIO", "jbt6k74"), +}; +#else +static struct regulator_consumer_supply ldo6_consumers[] = { + { .supply = "VDC", }, + { .supply = "VDDIO", }, +}; +#endif + struct pcf50633_platform_data gta02_pcf_pdata = { .resumers = { [0] = PCF50633_INT1_USBINS | @@ -268,6 +473,9 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .batteries = gta02_batteries, .num_batteries = ARRAY_SIZE(gta02_batteries), + + .chg_ref_current_ma = 1000, + .reg_init_data = { [PCF50633_REGULATOR_AUTO] = { .constraints = { @@ -310,6 +518,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, .always_on = 1, }, + .num_consumer_supplies = ARRAY_SIZE(hcldo_consumers), + .consumer_supplies = hcldo_consumers, }, [PCF50633_REGULATOR_LDO1] = { .constraints = { @@ -345,6 +555,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, + .num_consumer_supplies = ARRAY_SIZE(ldo4_consumers), + .consumer_supplies = ldo4_consumers, }, [PCF50633_REGULATOR_LDO5] = { .constraints = { @@ -356,6 +568,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .enabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers), + .consumer_supplies = ldo5_consumers, }, [PCF50633_REGULATOR_LDO6] = { .constraints = { @@ -363,6 +577,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .max_uV = 3000000, .valid_modes_mask = REGULATOR_MODE_NORMAL, }, + .num_consumer_supplies = ARRAY_SIZE(ldo6_consumers), + .consumer_supplies = ldo6_consumers, }, [PCF50633_REGULATOR_MEMLDO] = { .constraints = { @@ -456,11 +672,11 @@ static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE: pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__); - gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1); + gpio_set_value(GTA02_GPIO_USB_PULLUP, 1); break; case S3C2410_UDC_P_DISABLE: pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__); - gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0); + gpio_set_value(GTA02_GPIO_USB_PULLUP, 0); break; case S3C2410_UDC_P_RESET: pr_debug("%s S3C2410_UDC_P_RESET\n", __func__); @@ -475,8 +691,6 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = { }; - - static void gta02_bl_set_intensity(int intensity) { struct pcf50633 *pcf = gta02_pcf; @@ -538,8 +752,6 @@ static struct platform_device gta02_bl_dev = { }, }; - - /* USB */ static struct s3c2410_hcd_info gta02_usb_info = { .port[0] = { @@ -550,6 +762,198 @@ static struct s3c2410_hcd_info gta02_usb_info = { }, }; +/* Buttons */ +static struct gpio_keys_button gta02_buttons[] = { + { + .gpio = GTA02_GPIO_AUX_KEY, + .code = KEY_PHONE, + .desc = "Aux", + .type = EV_KEY, + .debounce_interval = 100, + }, + { + .gpio = GTA02_GPIO_HOLD_KEY, + .code = KEY_PAUSE, + .desc = "Hold", + .type = EV_KEY, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data gta02_buttons_pdata = { + .buttons = gta02_buttons, + .nbuttons = ARRAY_SIZE(gta02_buttons), +}; + +static struct platform_device gta02_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = >a02_buttons_pdata, + }, +}; + +/* LEDs */ +static struct gpio_led gta02_gpio_leds[] = { + { + .name = "gta02-power:orange", + .gpio = GTA02_GPIO_PWR_LED1, + }, + { + .name = "gta02-power:blue", + .gpio = GTA02_GPIO_PWR_LED2, + }, + { + .name = "gta02-aux:red", + .gpio = GTA02_GPIO_AUX_LED, + }, +}; + +static struct gpio_led_platform_data gta02_gpio_leds_pdata = { + .leds = gta02_gpio_leds, + .num_leds = ARRAY_SIZE(gta02_gpio_leds), +}; + +static struct platform_device gta02_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = >a02_gpio_leds_pdata, + }, +}; + +/* JBT6k74 display controller */ +static void gta02_jbt6k74_probe_completed(struct device *dev) +{ + struct pcf50633 *pcf = gta02_pcf; + /* Switch on backlight. Qi does not do it for us */ + pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01); + pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00); + pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01); + pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01); + + gta02_bl_dev.dev.parent = dev; + platform_device_register(>a02_bl_dev); +} + +const struct jbt6k74_platform_data jbt6k74_pdata = { + .probe_completed = gta02_jbt6k74_probe_completed, + .gpio_reset = GTA02_GPIO_GLAMO(4), +}; + +static struct spi_board_info gta02_spi_board_info[] = { + { + .modalias = "jbt6k74", + .platform_data = &jbt6k74_pdata, + .controller_data = (void*)GTA02_GPIO_GLAMO(12), + /* irq */ + .max_speed_hz = 100 * 1000, + .bus_num = 2, + .chip_select = 0 + }, +}; + +/* BQ27000 Battery */ + +struct bq27000_platform_data bq27000_pdata = { + .name = "battery", + .rsense_mohms = 20, + .hdq_read = hdq_read, + .hdq_write = hdq_write, + .hdq_initialized = hdq_initialized, + .get_charger_online_status = gta02_get_charger_online_status, + .get_charger_active_status = gta02_get_charger_active_status +}; + +struct platform_device bq27000_battery_device = { + .name = "bq27000-battery", + .dev = { + .platform_data = &bq27000_pdata, + }, +}; + +/* HDQ */ + +static void gta02_hdq_attach_child_devices(struct device *parent_device) +{ + bq27000_battery_device.dev.parent = parent_device; + platform_device_register(&bq27000_battery_device); +} + +static void gta02_hdq_gpio_direction_out(void) +{ + s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT); +} + +static void gta02_hdq_gpio_direction_in(void) +{ + s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT); +} + +static void gta02_hdq_gpio_set_value(int val) +{ + + s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val); +} + +static int gta02_hdq_gpio_get_value(void) +{ + return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ); +} + +static struct resource gta02_hdq_resources[] = { + [0] = { + .start = GTA02v5_GPIO_HDQ, + .end = GTA02v5_GPIO_HDQ, + }, +}; + +struct hdq_platform_data gta02_hdq_platform_data = { + .attach_child_devices = gta02_hdq_attach_child_devices, + .gpio_dir_out = gta02_hdq_gpio_direction_out, + .gpio_dir_in = gta02_hdq_gpio_direction_in, + .gpio_set = gta02_hdq_gpio_set_value, + .gpio_get = gta02_hdq_gpio_get_value, + + .enable_fiq = gta02_fiq_enable, + .disable_fiq = gta02_fiq_disable, + .kick_fiq = gta02_fiq_kick, + +}; + +struct platform_device gta02_hdq_device = { + .name = "hdq", + .num_resources = 1, + .resource = gta02_hdq_resources, + .dev = { + .platform_data = >a02_hdq_platform_data, + .parent = &s3c24xx_pwm_device.dev, + }, +}; + +/* vibrator (child of FIQ) */ + +static struct resource gta02_vibrator_resources[] = { + [0] = { + .start = GTA02_GPIO_VIBRATOR_ON, + .end = GTA02_GPIO_VIBRATOR_ON, + }, +}; + +struct gta02_vib_platform_data gta02_vib_pdata = { + .enable_fiq = gta02_fiq_enable, + .disable_fiq = gta02_fiq_disable, + .kick_fiq = gta02_fiq_kick, +}; + +static struct platform_device gta02_vibrator_device = { + .name = "gta02-vibrator", + .num_resources = ARRAY_SIZE(gta02_vibrator_resources), + .resource = gta02_vibrator_resources, + .dev = { + .platform_data = >a02_vib_pdata, + }, +}; static void __init gta02_map_io(void) { @@ -571,12 +975,20 @@ static struct platform_device *gta02_devices[] __initdata = { &s3c24xx_pwm_device, &s3c_device_iis, &s3c_device_i2c0, + >a02_buttons_device, + >a02_leds_device, + >a02_pm_gps_dev, + >a02_pm_bt_dev, + >a02_pm_gsm_dev, + >a02_pm_wlan_dev, }; /* These guys DO need to be children of PMU. */ static struct platform_device *gta02_devices_pmu_children[] = { - >a02_bl_dev, + >a02_glamo_dev, + >a02_hdq_device, + >a02_vibrator_device, }; @@ -609,11 +1021,85 @@ static void gta02_poweroff(void) pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1); } +/* On hardware rev 5 and earlier the leds are missing a resistor and reading + * from their gpio pins will always return 0, so we have to shadow the + * led states software */ +static unsigned long gpb_shadow; +extern struct s3c_gpio_chip s3c24xx_gpios[]; + +static void gta02_gpb_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0)); + unsigned long flags; + unsigned long dat; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04) | gpb_shadow; + dat &= ~(1 << offset); + gpb_shadow &= ~(1 << offset); + if (value) { + dat |= 1 << offset; + switch (offset) { + case 0 ... 2: + gpb_shadow |= 1 << offset; + break; + default: + break; + } + } + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); +} + +static int gta02_gpb_get(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0)); + unsigned long val; + + val = __raw_readl(base + 0x04) | gpb_shadow; + val >>= offset; + val &= 1; + + return val; +} + +static void gta02_hijack_gpb(void) +{ +/* Uncomment this, once support for S3C_SYSTEM_REV_ATAG has been merged + * upstream. + if (S3C_SYSTEM_REV_ATAG > GTA02v5_SYSTEM_REV) + return; +*/ + + s3c24xx_gpios[1].chip.set = gta02_gpb_set; + s3c24xx_gpios[1].chip.get = gta02_gpb_get; +} + +static void gta02_request_gpios(void) +{ + int ret; + ret = gpio_request(GTA02_GPIO_USB_PULLUP, "USB pullup"); + if (ret) { + printk(KERN_ERR "Failed to request USB pullup gpio pin: %d\n", ret); + } else { + ret = gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0); + if (ret) + printk(KERN_ERR "Failed to set USB pullup gpio direction: %d\n", ret); + } +} + static void __init gta02_machine_init(void) { /* Set the panic callback to make AUX LED blink at ~5Hz. */ panic_blink = gta02_panic_blink; + gta02_hijack_gpb(); + + gta02_request_gpios(); + s3c_pm_init(); #ifdef CONFIG_CHARGER_PCF50633 @@ -627,6 +1113,8 @@ static void __init gta02_machine_init(void) s3c_i2c0_set_platdata(NULL); i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); + spi_register_board_info(gta02_spi_board_info, + ARRAY_SIZE(gta02_spi_board_info)); platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); pm_power_off = gta02_poweroff; |