aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/blackfin/kernel/dma-mapping.c1
-rw-r--r--arch/m68k/kernel/dma.c2
-rw-r--r--arch/sparc64/kernel/iommu_common.c2
-rw-r--r--arch/sparc64/kernel/ldc.c2
-rw-r--r--arch/um/drivers/ubd_kern.c2
-rw-r--r--arch/x86/kernel/pci-gart_64.c3
-rw-r--r--arch/x86/lguest/boot.c53
-rw-r--r--arch/x86/lguest/i386_head.S8
8 files changed, 39 insertions, 34 deletions
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index a16cb03c529..d6b61d56b65 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -35,6 +35,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/scatterlist.h>
#include <asm/cacheflush.h>
#include <asm/bfin-global.h>
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index ef490e1ce60..6f8c080dd9f 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -9,10 +9,10 @@
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/kernel.h>
+#include <linux/scatterlist.h>
#include <linux/vmalloc.h>
#include <asm/pgalloc.h>
-#include <asm/scatterlist.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
diff --git a/arch/sparc64/kernel/iommu_common.c b/arch/sparc64/kernel/iommu_common.c
index b70324e0d83..efd5dff85f6 100644
--- a/arch/sparc64/kernel/iommu_common.c
+++ b/arch/sparc64/kernel/iommu_common.c
@@ -234,7 +234,7 @@ unsigned long prepare_sg(struct scatterlist *sg, int nents)
dma_sg->dma_length = dent_len;
if (dma_sg != sg) {
- dma_sg = next_sg(dma_sg);
+ dma_sg = sg_next(dma_sg);
dma_sg->dma_length = 0;
}
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index c8313cb60f0..217478a9412 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -2121,7 +2121,7 @@ int ldc_map_sg(struct ldc_channel *lp,
state.nc = 0;
for (i = 0; i < num_sg; i++)
- fill_cookies(&state, page_to_pfn(sg[i].page) << PAGE_SHIFT,
+ fill_cookies(&state, page_to_pfn(sg_page(&sg[i])) << PAGE_SHIFT,
sg[i].offset, sg[i].length);
return state.nc;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 3a8cd3dfb51..e184b44b101 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -35,6 +35,7 @@
#include "linux/genhd.h"
#include "linux/spinlock.h"
#include "linux/platform_device.h"
+#include "linux/scatterlist.h"
#include "asm/segment.h"
#include "asm/uaccess.h"
#include "asm/irq.h"
@@ -704,6 +705,7 @@ static int ubd_add(int n, char **error_out)
ubd_dev->size = ROUND_BLOCK(ubd_dev->size);
INIT_LIST_HEAD(&ubd_dev->restart);
+ sg_init_table(&ubd_dev->sg, MAX_SG);
err = -ENOMEM;
ubd_dev->queue = blk_init_queue(do_ubd_request, &ubd_dev->lock);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c56e9ee6496..ae7e0161ce4 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -338,7 +338,6 @@ static int __dma_map_cont(struct scatterlist *start, int nelems,
BUG_ON(s != start && s->offset);
if (s == start) {
- *sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
@@ -365,7 +364,7 @@ static inline int dma_map_cont(struct scatterlist *start, int nelems,
{
if (!need) {
BUG_ON(nelems != 1);
- *sout = *start;
+ sout->dma_address = start->dma_address;
sout->dma_length = start->length;
return 0;
}
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 8f1356258aa..a55b0902f9d 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -99,7 +99,7 @@ static cycle_t clock_base;
* When lazy_mode is set, it means we're allowed to defer all hypercalls and do
* them as a batch when lazy_mode is eventually turned off. Because hypercalls
* are reasonably expensive, batching them up makes sense. For example, a
- * large mmap might update dozens of page table entries: that code calls
+ * large munmap might update dozens of page table entries: that code calls
* paravirt_enter_lazy_mmu(), does the dozen updates, then calls
* lguest_leave_lazy_mode().
*
@@ -164,8 +164,8 @@ void async_hcall(unsigned long call,
/*:*/
/*G:033
- * Here are our first native-instruction replacements: four functions for
- * interrupt control.
+ * After that diversion we return to our first native-instruction
+ * replacements: four functions for interrupt control.
*
* The simplest way of implementing these would be to have "turn interrupts
* off" and "turn interrupts on" hypercalls. Unfortunately, this is too slow:
@@ -184,7 +184,7 @@ static unsigned long save_fl(void)
return lguest_data.irq_enabled;
}
-/* "restore_flags" just sets the flags back to the value given. */
+/* restore_flags() just sets the flags back to the value given. */
static void restore_fl(unsigned long flags)
{
lguest_data.irq_enabled = flags;
@@ -357,7 +357,7 @@ static void lguest_cpuid(unsigned int *eax, unsigned int *ebx,
* it. The Host needs to know when the Guest wants to change them, so we have
* a whole series of functions like read_cr0() and write_cr0().
*
- * We start with CR0. CR0 allows you to turn on and off all kinds of basic
+ * We start with cr0. cr0 allows you to turn on and off all kinds of basic
* features, but Linux only really cares about one: the horrifically-named Task
* Switched (TS) bit at bit 3 (ie. 8)
*
@@ -372,8 +372,7 @@ static void lguest_cpuid(unsigned int *eax, unsigned int *ebx,
static unsigned long current_cr0, current_cr3;
static void lguest_write_cr0(unsigned long val)
{
- /* 8 == TS bit. */
- lazy_hcall(LHCALL_TS, val & 8, 0, 0);
+ lazy_hcall(LHCALL_TS, val & X86_CR0_TS, 0, 0);
current_cr0 = val;
}
@@ -388,10 +387,10 @@ static unsigned long lguest_read_cr0(void)
static void lguest_clts(void)
{
lazy_hcall(LHCALL_TS, 0, 0, 0);
- current_cr0 &= ~8U;
+ current_cr0 &= ~X86_CR0_TS;
}
-/* CR2 is the virtual address of the last page fault, which the Guest only ever
+/* cr2 is the virtual address of the last page fault, which the Guest only ever
* reads. The Host kindly writes this into our "struct lguest_data", so we
* just read it out of there. */
static unsigned long lguest_read_cr2(void)
@@ -399,7 +398,7 @@ static unsigned long lguest_read_cr2(void)
return lguest_data.cr2;
}
-/* CR3 is the current toplevel pagetable page: the principle is the same as
+/* cr3 is the current toplevel pagetable page: the principle is the same as
* cr0. Keep a local copy, and tell the Host when it changes. */
static void lguest_write_cr3(unsigned long cr3)
{
@@ -412,7 +411,7 @@ static unsigned long lguest_read_cr3(void)
return current_cr3;
}
-/* CR4 is used to enable and disable PGE, but we don't care. */
+/* cr4 is used to enable and disable PGE, but we don't care. */
static unsigned long lguest_read_cr4(void)
{
return 0;
@@ -433,7 +432,7 @@ static void lguest_write_cr4(unsigned long val)
* maps virtual addresses to physical addresses using "page tables". We could
* use one huge index of 1 million entries: each address is 4 bytes, so that's
* 1024 pages just to hold the page tables. But since most virtual addresses
- * are unused, we use a two level index which saves space. The CR3 register
+ * are unused, we use a two level index which saves space. The cr3 register
* contains the physical address of the top level "page directory" page, which
* contains physical addresses of up to 1024 second-level pages. Each of these
* second level pages contains up to 1024 physical addresses of actual pages,
@@ -441,7 +440,7 @@ static void lguest_write_cr4(unsigned long val)
*
* Here's a diagram, where arrows indicate physical addresses:
*
- * CR3 ---> +---------+
+ * cr3 ---> +---------+
* | --------->+---------+
* | | | PADDR1 |
* Top-level | | PADDR2 |
@@ -499,8 +498,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
*
* ... except in early boot when the kernel sets up the initial pagetables,
* which makes booting astonishingly slow. So we don't even tell the Host
- * anything changed until we've done the first page table switch.
- */
+ * anything changed until we've done the first page table switch. */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
*ptep = pteval;
@@ -721,10 +719,10 @@ static void lguest_time_init(void)
/* Set up the timer interrupt (0) to go to our simple timer routine */
set_irq_handler(0, lguest_time_irq);
- /* Our clock structure look like arch/i386/kernel/tsc.c if we can use
- * the TSC, otherwise it's a dumb nanosecond-resolution clock. Either
- * way, the "rating" is initialized so high that it's always chosen
- * over any other clocksource. */
+ /* Our clock structure looks like arch/x86/kernel/tsc_32.c if we can
+ * use the TSC, otherwise it's a dumb nanosecond-resolution clock.
+ * Either way, the "rating" is set so high that it's always chosen over
+ * any other clocksource. */
if (lguest_data.tsc_khz)
lguest_clock.mult = clocksource_khz2mult(lguest_data.tsc_khz,
lguest_clock.shift);
@@ -750,7 +748,7 @@ static void lguest_time_init(void)
* to work. They're pretty simple.
*/
-/* The Guest needs to tell the host what stack it expects traps to use. For
+/* The Guest needs to tell the Host what stack it expects traps to use. For
* native hardware, this is part of the Task State Segment mentioned above in
* lguest_load_tr_desc(), but to help hypervisors there's this special call.
*
@@ -851,13 +849,16 @@ static __init char *lguest_memory_setup(void)
return "LGUEST";
}
-/* Before virtqueues are set up, we use LHCALL_NOTIFY on normal memory to
- * produce console output. */
+/* We will eventually use the virtio console device to produce console output,
+ * but before that is set up we use LHCALL_NOTIFY on normal memory to produce
+ * console output. */
static __init int early_put_chars(u32 vtermno, const char *buf, int count)
{
char scratch[17];
unsigned int len = count;
+ /* We use a nul-terminated string, so we have to make a copy. Icky,
+ * huh? */
if (len > sizeof(scratch) - 1)
len = sizeof(scratch) - 1;
scratch[len] = '\0';
@@ -884,7 +885,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
* Our current solution is to allow the paravirt back end to optionally patch
* over the indirect calls to replace them with something more efficient. We
* patch the four most commonly called functions: disable interrupts, enable
- * interrupts, restore interrupts and save interrupts. We usually have 10
+ * interrupts, restore interrupts and save interrupts. We usually have 6 or 10
* bytes to patch into: the Guest versions of these operations are small enough
* that we can fit comfortably.
*
@@ -1016,7 +1017,7 @@ __init void lguest_init(void)
asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
/* The Host uses the top of the Guest's virtual address space for the
- * Host<->Guest Switcher, and it tells us how much it needs in
+ * Host<->Guest Switcher, and it tells us how big that is in
* lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
reserve_top_address(lguest_data.reserve_mem);
@@ -1066,6 +1067,6 @@ __init void lguest_init(void)
/*
* This marks the end of stage II of our journey, The Guest.
*
- * It is now time for us to explore the nooks and crannies of the three Guest
- * devices and complete our understanding of the Guest in "make Drivers".
+ * It is now time for us to explore the layer of virtual drivers and complete
+ * our understanding of the Guest in "make Drivers".
*/
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index ebc6ac73389..95b6fbcded6 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -6,7 +6,7 @@
#include <asm/processor-flags.h>
/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here. The boot header is in %esi.
+ * type field is "1" (lguest), so calls us here.
*
* WARNING: be very careful here! We're running at addresses equal to physical
* addesses (around 0), not above PAGE_OFFSET as most code expectes
@@ -17,13 +17,15 @@
* boot. */
.section .init.text, "ax", @progbits
ENTRY(lguest_entry)
- /* Make initial hypercall now, so we can set up the pagetables. */
+ /* We make the "initialization" hypercall now to tell the Host about
+ * us, and also find out where it put our page tables. */
movl $LHCALL_LGUEST_INIT, %eax
movl $lguest_data - __PAGE_OFFSET, %edx
int $LGUEST_TRAP_ENTRY
/* The Host put the toplevel pagetable in lguest_data.pgdir. The movsl
- * instruction uses %esi implicitly. */
+ * instruction uses %esi implicitly as the source for the copy we'
+ * about to do. */
movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
/* Copy first 32 entries of page directory to __PAGE_OFFSET entries.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 11:56:01 +0000