diff options
Diffstat (limited to 'arch')
308 files changed, 15905 insertions, 5639 deletions
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index eb20c3afff5..a8682612abc 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -43,21 +43,17 @@ #include "proto.h" #include "pci_impl.h" -void default_idle(void) -{ - barrier(); -} - void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + while (1) { - void (*idle)(void) = default_idle; /* FIXME -- EV6 and LCA45 know how to power down the CPU. */ while (!need_resched()) - idle(); + cpu_relax(); schedule(); } } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 91d5ef3397b..3df7cbd924a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig" source "arch/arm/mach-omap1/Kconfig" +source "arch/arm/mach-omap2/Kconfig" + source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-lh7a40x/Kconfig" @@ -356,6 +358,16 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. +config LOCAL_TIMERS + bool "Use local timer interrupts" + depends on SMP && REALVIEW_MPCORE + default y + help + Enable support for local timers on SMP platforms, rather then the + legacy IPI broadcast method. Local timers allows the system + accounting to be spread across the timer interval, preventing a + "thundering herd" at every timer tick. + config PREEMPT bool "Preemptible Kernel (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 114cda7f1b7..81bd2193fe6 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_OMAP1) := omap1 + machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 50f13eec6cd..5ab94584bae 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -283,8 +283,14 @@ void flush_window(void) putstr("."); } +#ifndef arch_error +#define arch_error(x) +#endif + static void error(char *x) { + arch_error(x); + putstr("\n\n"); putstr(x); putstr("\n\n -- System halted"); diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index ad55680726e..557e52c1c86 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -550,9 +550,9 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, pm_message_t state) +static int locomo_suspend(struct platform_device *dev, pm_message_t state) { - struct locomo *lchip = dev_get_drvdata(dev); + struct locomo *lchip = platform_get_drvdata(dev); struct locomo_save_data *save; unsigned long flags; @@ -560,7 +560,7 @@ static int locomo_suspend(struct device *dev, pm_message_t state) if (!save) return -ENOMEM; - dev->power.saved_state = (void *) save; + dev->dev.power.saved_state = (void *) save; spin_lock_irqsave(&lchip->lock, flags); @@ -594,14 +594,14 @@ static int locomo_suspend(struct device *dev, pm_message_t state) return 0; } -static int locomo_resume(struct device *dev) +static int locomo_resume(struct platform_device *dev) { - struct locomo *lchip = dev_get_drvdata(dev); + struct locomo *lchip = platform_get_drvdata(dev); struct locomo_save_data *save; unsigned long r; unsigned long flags; - save = (struct locomo_save_data *) dev->power.saved_state; + save = (struct locomo_save_data *) dev->dev.power.saved_state; if (!save) return 0; @@ -760,27 +760,26 @@ static void __locomo_remove(struct locomo *lchip) kfree(lchip); } -static int locomo_probe(struct device *dev) +static int locomo_probe(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *mem; int irq; - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!mem) return -EINVAL; - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq(dev, 0); - return __locomo_probe(dev, mem, irq); + return __locomo_probe(&dev->dev, mem, irq); } -static int locomo_remove(struct device *dev) +static int locomo_remove(struct platform_device *dev) { - struct locomo *lchip = dev_get_drvdata(dev); + struct locomo *lchip = platform__get_drvdata(dev); if (lchip) { __locomo_remove(lchip); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); } return 0; @@ -792,15 +791,16 @@ static int locomo_remove(struct device *dev) * the per-machine level, and then have this driver pick * up the registered devices. */ -static struct device_driver locomo_device_driver = { - .name = "locomo", - .bus = &platform_bus_type, +static struct platform_driver locomo_device_driver = { .probe = locomo_probe, .remove = locomo_remove, #ifdef CONFIG_PM .suspend = locomo_suspend, .resume = locomo_resume, #endif + .driver = { + .name = "locomo", + }, }; /* @@ -1126,13 +1126,13 @@ static int __init locomo_init(void) { int ret = bus_register(&locomo_bus_type); if (ret == 0) - driver_register(&locomo_device_driver); + platform_driver_register(&locomo_device_driver); return ret; } static void __exit locomo_exit(void) { - driver_unregister(&locomo_device_driver); + platform_driver_unregister(&locomo_device_driver); bus_unregister(&locomo_bus_type); } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 174aa86ee81..7b07acb03f3 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -801,9 +801,9 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct device *dev, pm_message_t state) +static int sa1111_suspend(struct platform_device *dev, pm_message_t state) { - struct sa1111 *sachip = dev_get_drvdata(dev); + struct sa1111 *sachip = platform_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags; unsigned int val; @@ -812,7 +812,7 @@ static int sa1111_suspend(struct device *dev, pm_message_t state) save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; - dev->power.saved_state = save; + dev->dev.power.saved_state = save; spin_lock_irqsave(&sachip->lock, flags); @@ -859,14 +859,14 @@ static int sa1111_suspend(struct device *dev, pm_message_t state) * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct device *dev) +static int sa1111_resume(struct platform_device *dev) { - struct sa1111 *sachip = dev_get_drvdata(dev); + struct sa1111 *sachip = platform_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; - save = (struct sa1111_save_data *)dev->power.saved_state; + save = (struct sa1111_save_data *)dev->dev.power.saved_state; if (!save) return 0; @@ -879,7 +879,7 @@ static int sa1111_resume(struct device *dev) id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); kfree(save); return 0; } @@ -911,7 +911,7 @@ static int sa1111_resume(struct device *dev) spin_unlock_irqrestore(&sachip->lock, flags); - dev->power.saved_state = NULL; + dev->dev.power.saved_state = NULL; kfree(save); return 0; @@ -922,9 +922,8 @@ static int sa1111_resume(struct device *dev) #define sa1111_resume NULL #endif -static int sa1111_probe(struct device *dev) +static int sa1111_probe(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *mem; int irq; @@ -933,20 +932,20 @@ static int sa1111_probe(struct device *dev) return -EINVAL; irq = platform_get_irq(pdev, 0); - return __sa1111_probe(dev, mem, irq); + return __sa1111_probe(&pdev->dev, mem, irq); } -static int sa1111_remove(struct device *dev) +static int sa1111_remove(struct platform_device *pdev) { - struct sa1111 *sachip = dev_get_drvdata(dev); + struct sa1111 *sachip = platform_get_drvdata(pdev); if (sachip) { __sa1111_remove(sachip); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); #ifdef CONFIG_PM - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; + kfree(pdev->dev.power.saved_state); + pdev->dev.power.saved_state = NULL; #endif } @@ -962,13 +961,14 @@ static int sa1111_remove(struct device *dev) * We also need to handle the SDRAM configuration for * PXA250/SA1110 machine classes. */ -static struct device_driver sa1111_device_driver = { - .name = "sa1111", - .bus = &platform_bus_type, +static struct platform_driver sa1111_device_driver = { .probe = sa1111_probe, .remove = sa1111_remove, .suspend = sa1111_suspend, .resume = sa1111_resume, + .driver = { + .name = "sa1111", + }, }; /* @@ -1256,13 +1256,13 @@ static int __init sa1111_init(void) { int ret = bus_register(&sa1111_bus_type); if (ret == 0) - driver_register(&sa1111_device_driver); + platform_driver_register(&sa1111_device_driver); return ret; } static void __exit sa1111_exit(void) { - driver_unregister(&sa1111_device_driver); + platform_driver_unregister(&sa1111_device_driver); bus_unregister(&sa1111_bus_type); } diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index bb4eff61441..32924c6714f 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -19,12 +19,6 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) -/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c - There is no easy way to link multiple scoop devices into one - single entity for the pxa2xx_pcmcia device */ -int scoop_num; -struct scoop_pcmcia_dev *scoop_devs; - struct scoop_dev { void *base; spinlock_t scoop_lock; @@ -104,9 +98,9 @@ static void check_scoop_reg(struct scoop_dev *sdev) } #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, pm_message_t state) +static int scoop_suspend(struct platform_device *dev, pm_message_t state) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); @@ -115,9 +109,9 @@ static int scoop_suspend(struct device *dev, pm_message_t state) return 0; } -static int scoop_resume(struct device *dev) +static int scoop_resume(struct platform_device *dev) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; @@ -129,11 +123,10 @@ static int scoop_resume(struct device *dev) #define scoop_resume NULL #endif -int __init scoop_probe(struct device *dev) +int __init scoop_probe(struct platform_device *pdev) { struct scoop_dev *devptr; struct scoop_config *inf; - struct platform_device *pdev = to_platform_device(dev); struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) @@ -147,7 +140,7 @@ int __init scoop_probe(struct device *dev) memset(devptr, 0, sizeof(struct scoop_dev)); spin_lock_init(&devptr->scoop_lock); - inf = dev->platform_data; + inf = pdev->dev.platform_data; devptr->base = ioremap(mem->start, mem->end - mem->start + 1); if (!devptr->base) { @@ -155,7 +148,7 @@ int __init scoop_probe(struct device *dev) return -ENOMEM; } - dev_set_drvdata(dev, devptr); + platform_set_drvdata(pdev, devptr); printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base); @@ -170,29 +163,30 @@ int __init scoop_probe(struct device *dev) return 0; } -static int scoop_remove(struct device *dev) +static int scoop_remove(struct platform_device *pdev) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = platform_get_drvdata(pdev); if (sdev) { iounmap(sdev->base); kfree(sdev); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); } return 0; } -static struct device_driver scoop_driver = { - .name = "sharp-scoop", - .bus = &platform_bus_type, +static struct platform_driver scoop_driver = { .probe = scoop_probe, .remove = scoop_remove, .suspend = scoop_suspend, .resume = scoop_resume, + .driver = { + .name = "sharp-scoop", + }, }; int __init scoop_init(void) { - return driver_register(&scoop_driver); + return platform_driver_register(&scoop_driver); } subsys_initcall(scoop_init); diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 4198677cd39..529f0f72e1e 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Mon Sep 5 18:07:12 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 18:53:40 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_KMOD is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -81,6 +100,7 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_OMAP=y # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -112,7 +132,7 @@ CONFIG_OMAP_SERIAL_WAKE=y # OMAP Core Type # # CONFIG_ARCH_OMAP730 is not set -# CONFIG_ARCH_OMAP1510 is not set +# CONFIG_ARCH_OMAP15XX is not set CONFIG_ARCH_OMAP16XX=y # @@ -177,6 +197,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -258,14 +280,19 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -281,6 +308,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -291,6 +322,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -328,21 +360,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -369,10 +393,12 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -404,6 +430,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -439,6 +470,7 @@ CONFIG_PPP=y # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y @@ -541,18 +573,18 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set -CONFIG_ISP1301_OMAP=y # # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -560,6 +592,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -576,7 +612,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -589,6 +624,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -600,6 +636,7 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set +# CONFIG_FONT_RL is not set # # Logo configuration @@ -624,10 +661,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_AD1980 is not set # # USB support @@ -637,22 +674,21 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set -CONFIG_USB_GADGET_OMAP=y -CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -673,10 +709,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -685,6 +717,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -706,10 +739,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -750,6 +783,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -859,6 +893,7 @@ CONFIG_CRYPTO_DES=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7b17a87a331..7a3261f0bf7 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -9,6 +9,7 @@ */ #include <linux/module.h> #include <linux/string.h> +#include <linux/cryptohash.h> #include <linux/delay.h> #include <linux/in6.h> #include <linux/syscalls.h> @@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2); EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); + /* crypto hash */ +EXPORT_SYMBOL(sha_transform); + /* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a511ec5b11a..d9fb819bf7c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -47,6 +47,13 @@ movne r0, sp adrne lr, 1b bne do_IPI + +#ifdef CONFIG_LOCAL_TIMERS + test_for_ltirq r0, r6, r5, lr + movne r0, sp + adrne lr, 1b + bne do_local_timer +#endif #endif .endm diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 9def4404e1f..d7099dbbb87 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -264,6 +264,7 @@ unlock: #endif #ifdef CONFIG_SMP show_ipi_list(p); + show_local_irqs(p); #endif seq_printf(p, "Err: %10lu\n", irq_err_count); } @@ -995,7 +996,7 @@ void __init init_irq_proc(void) struct proc_dir_entry *dir; int irq; - dir = proc_mkdir("irq", 0); + dir = proc_mkdir("irq", NULL); if (!dir) return; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index ba298277bec..30494aab829 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -86,12 +86,16 @@ EXPORT_SYMBOL(pm_power_off); */ void default_idle(void) { - local_irq_disable(); - if (!need_resched() && !hlt_counter) { - timer_dyn_reprogram(); - arch_idle(); + if (hlt_counter) + cpu_relax(); + else { + local_irq_disable(); + if (!need_resched()) { + timer_dyn_reprogram(); + arch_idle(); + } + local_irq_enable(); } - local_irq_enable(); } /* @@ -116,13 +120,13 @@ void cpu_idle(void) if (!idle) idle = default_idle; - preempt_disable(); leds_event(led_idle_start); while (!need_resched()) idle(); leds_event(led_idle_end); - preempt_enable(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -355,7 +359,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start, struct thread_info *thread = p->thread_info; struct pt_regs *childregs; - childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1; + childregs = (void *)thread + THREAD_START_SP - sizeof(*regs); *childregs = *regs; childregs->ARM_r0 = 0; childregs->ARM_sp = stack_start; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index edb5a406922..e55ea952f7a 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu) ret = -EIO; } - secondary_data.stack = 0; + secondary_data.stack = NULL; secondary_data.pgdir = 0; *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); @@ -185,6 +185,11 @@ int __cpuexit __cpu_disable(void) migrate_irqs(); /* + * Stop the local timer for this CPU. + */ + local_timer_stop(cpu); + + /* * Flush user cache and TLB mappings, and then remove this CPU * from the vm mask set of all processes. */ @@ -251,7 +256,9 @@ void __cpuexit cpu_die(void) asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + cpu = smp_processor_id(); printk("CPU%u: Booted secondary processor\n", cpu); @@ -268,6 +275,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_flush_tlb_all(); cpu_init(); + preempt_disable(); /* * Give the platform a chance to do its own initialisation. @@ -290,6 +298,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void) cpu_set(cpu, cpu_online_map); /* + * Setup local timer for this CPU. + */ + local_timer_setup(cpu); + + /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -359,8 +372,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) * You must not call this function with disabled interrupts, from a * hardware interrupt handler, nor from a bottom half handler. */ -int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry, - int wait, cpumask_t callmap) +static int smp_call_function_on_cpu(void (*func)(void *info), void *info, + int retry, int wait, cpumask_t callmap) { struct smp_call_struct data; unsigned long timeout; @@ -454,6 +467,18 @@ void show_ipi_list(struct seq_file *p) seq_putc(p, '\n'); } +void show_local_irqs(struct seq_file *p) +{ + unsigned int cpu; + + seq_printf(p, "LOC: "); + + for_each_present_cpu(cpu) + seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs); + + seq_putc(p, '\n'); +} + static void ipi_timer(struct pt_regs *regs) { int user = user_mode(regs); @@ -464,6 +489,18 @@ static void ipi_timer(struct pt_regs *regs) irq_exit(); } +#ifdef CONFIG_LOCAL_TIMERS +asmlinkage void do_local_timer(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + if (local_timer_ack()) { + irq_stat[cpu].local_timer_irqs++; + ipi_timer(regs); + } +} +#endif + /* * ipi_call_function - handle IPI from smp_call_function() * @@ -515,7 +552,7 @@ static void ipi_cpu_stop(unsigned int cpu) * * Bit 0 - Inter-processor function call */ -void do_IPI(struct pt_regs *regs) +asmlinkage void do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index f35d91fbe11..b8c14e93669 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -34,7 +34,7 @@ and r2, r0, #7 mov r3, #1 mov r3, r3, lsl r2 - save_and_disable_irqs ip, r2 + save_and_disable_irqs ip ldrb r2, [r1, r0, lsr #3] \instr r2, r2, r3 strb r2, [r1, r0, lsr #3] @@ -54,7 +54,7 @@ add r1, r1, r0, lsr #3 and r3, r0, #7 mov r0, #1 - save_and_disable_irqs ip, r2 + save_and_disable_irqs ip ldrb r2, [r1] tst r2, r0, lsl r3 \instr r2, r2, r0, lsl r3 diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index cb5e3708f11..fe797cf320b 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -39,6 +39,7 @@ td3 .req lr /* we must have at least one byte. */ tst buf, #1 @ odd address? + movne sum, sum, ror #8 ldrneb td0, [buf], #1 subne len, len, #1 adcnes sum, sum, td0, put_byte_1 @@ -103,6 +104,9 @@ ENTRY(csum_partial) cmp len, #8 @ Ensure that we have at least blo .less8 @ 8 bytes to copy. + tst buf, #1 + movne sum, sum, ror #8 + adds sum, sum, #0 @ C = 0 tst buf, #3 @ Test destination alignment blne .not_aligned @ aligh destination, return here diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 89762a26495..385285851cb 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" +# This entry is placed on top because otherwise it would have +# been shown as a submenu. +config MACH_NSLU2 + bool + prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + help + Say 'Y' here if you want your kernel to support Linksys's + NSLU2 NAS device. For more information on this platform, + see http://www.nslu2-linux.org + config ARCH_AVILA bool "Avila" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index ddecbda4a63..7a15629c18d 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c new file mode 100644 index 00000000000..a575f2e0b2c --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-pci.c + * + * NSLU2 board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/config.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +void __init nslu2_pci_preinit(void) +{ + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + + gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); + + /* INTD is not configured as GPIO is used + * for the power input button. + */ + + ixp4xx_pci_preinit(); +} + +static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { + IRQ_NSLU2_PCI_INTA, + IRQ_NSLU2_PCI_INTB, + IRQ_NSLU2_PCI_INTC, + }; + + int irq = -1; + + if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && + pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { + irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; + } + + return irq; +} + +struct hw_pci __initdata nslu2_pci = { + .nr_controllers = 1, + .preinit = nslu2_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = nslu2_map_irq, +}; + +int __init nslu2_pci_init(void) /* monkey see, monkey do */ +{ + if (machine_is_nslu2()) + pci_common_init(&nslu2_pci); + + return 0; +} + +subsys_initcall(nslu2_pci_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c new file mode 100644 index 00000000000..18fbc8c0fb3 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-power.c + * + * NSLU2 Power/Reset driver + * + * Copyright (C) 2005 Tower Technologies + * + * based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/mach-types.h> + +extern void ctrl_alt_del(void); + +static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init nslu2_power_init(void) +{ + if (!(machine_is_nslu2())) + return 0; + + *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ + + set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); + set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); + + gpio_line_isr_clear(NSLU2_RB_GPIO); + gpio_line_isr_clear(NSLU2_PB_GPIO); + + if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, + SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + NSLU2_RB_IRQ); + + return -EIO; + } + + if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, + SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + NSLU2_PB_IRQ); + + return -EIO; + } + + return 0; +} + +static void __exit nslu2_power_exit(void) +{ + free_irq(NSLU2_RB_IRQ, NULL); + free_irq(NSLU2_PB_IRQ, NULL); +} + +module_init(nslu2_power_init); +module_exit(nslu2_power_exit); + +MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c new file mode 100644 index 00000000000..289e94cb65c --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -0,0 +1,134 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Mark Rakes <mrakes at mac.com> + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 + * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .start = NSLU2_FLASH_BASE, + .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nslu2_flash_data, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev.platform_data = &nslu2_i2c_gpio_pins, + .num_resources = 0, +}; + +static struct resource nslu2_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nslu2_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nslu2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nslu2_uart_data, + .num_resources = 2, + .resource = nslu2_uart_resources, +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, + &nslu2_uart, +}; + +static void nslu2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio */ + gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); + + /* do the deed */ + gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); +} + +static void __init nslu2_init(void) +{ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; + + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + /* Maintainer: www.nslu2-linux.org */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = nslu2_init, +MACHINE_END diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 27fc2e8e5fc..86a0f0d1434 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -6,10 +6,10 @@ config ARCH_OMAP730 bool "OMAP730 Based System" select ARCH_OMAP_OTG -config ARCH_OMAP1510 +config ARCH_OMAP15XX depends on ARCH_OMAP1 default y - bool "OMAP1510 Based System" + bool "OMAP15xx Based System" config ARCH_OMAP16XX depends on ARCH_OMAP1 @@ -21,7 +21,7 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2 config MACH_VOICEBLUE bool "Voiceblue" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such a board. config MACH_NETSTAR bool "NetStar" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Support for NetStar PBX. Say Y here if you have such a board. +config MACH_OMAP_PALMTE + bool "Palm Tungsten E" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Tungsten E PDA. Currently only the LCD panel + is supported. To boot the kernel, you'll need a PalmOS compatible + bootloader; check out http://palmtelinux.sourceforge.net for more + informations. + Say Y here if you have such a PDA, say NO otherwise. + config MACH_OMAP_GENERIC bool "Generic OMAP board" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to @@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ config OMAP_ARM_168MHZ bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 168MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_150MHZ bool "OMAP ARM 150 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Enable 150MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_120MHZ bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 120MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) default y help Enable 60MHz clock for OMAP CPU. If unsure, say Y. config OMAP_ARM_30MHZ bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 30MHz clock for OMAP CPU. If unsure, say N. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 181a93deaae..b0b00156faa 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o irq.o time.o serial.o devices.o +obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o led-y := leds.o # Specific board support @@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o +obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o -ifeq ($(CONFIG_ARCH_OMAP1510),y) +ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o endif diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index c209c7172a9..4b292e93fbe 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -28,8 +28,6 @@ #include <asm/arch/board.h> #include <asm/arch/common.h> -static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static void __init omap_generic_init_irq(void) { omap_init_irq(); @@ -37,7 +35,7 @@ static void __init omap_generic_init_irq(void) /* assume no Mini-AB port */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config generic1510_usb_config __initdata = { .register_host = 1, .register_dev = 1, @@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = { #endif +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel generic_config[] = { { OMAP_TAG_USB, NULL }, { OMAP_TAG_MMC, &generic_mmc_config }, + { OMAP_TAG_UART, &generic_uart_config }, }; static void __init omap_generic_init(void) { - const struct omap_uart_config *uart_conf; - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { generic_config[0].data = &generic1510_usb_config; } @@ -101,20 +97,9 @@ static void __init omap_generic_init(void) } #endif - uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); - if (uart_conf != NULL) { - unsigned int enabled_ports, i; - - enabled_ports = uart_conf->enabled_uarts; - for (i = 0; i < 3; i++) { - if (!(enabled_ports & (1 << i))) - generic_serial_ports[i] = 0; - } - } - omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); - omap_serial_init(generic_serial_ports); + omap_serial_init(); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 4ee6bd8a50b..a07e2c9307f 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -40,8 +40,6 @@ extern int omap_gpio_init(void); -static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition h2_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = { }, }; +static struct omap_uart_config h2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config h2_lcd_config __initdata = { + .panel_name = "h2", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel h2_config[] = { { OMAP_TAG_USB, &h2_usb_config }, { OMAP_TAG_MMC, &h2_mmc_config }, + { OMAP_TAG_UART, &h2_uart_config }, + { OMAP_TAG_LCD, &h2_lcd_config }, }; static void __init h2_init(void) @@ -180,12 +189,12 @@ static void __init h2_init(void) platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); + omap_serial_init(); } static void __init h2_map_io(void) { omap_map_common_io(); - omap_serial_init(h2_serial_ports); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index fc824361430..668e278433c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,8 +41,6 @@ extern int omap_gpio_init(void); -static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition h3_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = { }, }; +static struct omap_uart_config h3_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config h3_lcd_config __initdata = { + .panel_name = "h3", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel h3_config[] = { - { OMAP_TAG_USB, &h3_usb_config }, - { OMAP_TAG_MMC, &h3_mmc_config }, + { OMAP_TAG_USB, &h3_usb_config }, + { OMAP_TAG_MMC, &h3_mmc_config }, + { OMAP_TAG_UART, &h3_uart_config }, + { OMAP_TAG_LCD, &h3_lcd_config }, }; static void __init h3_init(void) @@ -180,6 +189,7 @@ static void __init h3_init(void) (void) platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); + omap_serial_init(); } static void __init h3_init_smc91x(void) @@ -201,7 +211,6 @@ void h3_init_irq(void) static void __init h3_map_io(void) { omap_map_common_io(); - omap_serial_init(h3_serial_ports); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index a2eac853b2d..95f1ff36cdc 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -36,8 +36,6 @@ #include <asm/arch/usb.h> #include <asm/arch/common.h> -static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition innovator_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -99,7 +97,7 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc innovator1510_io_desc[] __initdata = { @@ -136,7 +134,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { &innovator1510_smc91x_device, }; -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #ifdef CONFIG_ARCH_OMAP16XX @@ -185,7 +183,7 @@ void innovator_init_irq(void) { omap_init_irq(); omap_gpio_init(); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1510_fpga_init_irq(); } @@ -193,7 +191,7 @@ void innovator_init_irq(void) innovator_init_smc91x(); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ .hmc_mode = 4, @@ -205,6 +203,11 @@ static struct omap_usb_config innovator1510_usb_config __initdata = { .register_dev = 1, .pins[0] = 2, }; + +static struct omap_lcd_config innovator1510_lcd_config __initdata = { + .panel_name = "inn1510", + .ctrl_name = "internal", +}; #endif #ifdef CONFIG_ARCH_OMAP16XX @@ -222,6 +225,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .pins[1] = 3, }; + +static struct omap_lcd_config innovator1610_lcd_config __initdata = { + .panel_name = "inn1610", + .ctrl_name = "internal", +}; #endif static struct omap_mmc_config innovator_mmc_config __initdata = { @@ -234,14 +242,20 @@ static struct omap_mmc_config innovator_mmc_config __initdata = { }, }; +static struct omap_uart_config innovator_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel innovator_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_LCD, NULL }, { OMAP_TAG_MMC, &innovator_mmc_config }, + { OMAP_TAG_UART, &innovator_uart_config }, }; static void __init innovator_init(void) { -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); } @@ -252,23 +266,28 @@ static void __init innovator_init(void) } #endif -#ifdef CONFIG_ARCH_OMAP1510 - if (cpu_is_omap1510()) +#ifdef CONFIG_ARCH_OMAP15XX + if (cpu_is_omap1510()) { innovator_config[0].data = &innovator1510_usb_config; + innovator_config[1].data = &innovator1510_lcd_config; + } #endif #ifdef CONFIG_ARCH_OMAP16XX - if (cpu_is_omap1610()) + if (cpu_is_omap1610()) { innovator_config[0].data = &h2_usb_config; + innovator_config[1].data = &innovator1610_lcd_config; + } #endif omap_board_config = innovator_config; omap_board_config_size = ARRAY_SIZE(innovator_config); + omap_serial_init(); } static void __init innovator_map_io(void) { omap_map_common_io(); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); udelay(10); /* Delay needed for FPGA */ @@ -280,7 +299,6 @@ static void __init innovator_map_io(void) fpga_read(OMAP1510_FPGA_BOARD_REV)); } #endif - omap_serial_init(innovator_serial_ports); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index c851c2e4dfc..0448fa7de8a 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -55,6 +55,14 @@ static struct platform_device *netstar_devices[] __initdata = { &netstar_smc91x_device, }; +static struct omap_uart_config netstar_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel netstar_config[] = { + { OMAP_TAG_UART, &netstar_uart_config }, +}; + static void __init netstar_init_irq(void) { omap_init_irq(); @@ -92,14 +100,15 @@ static void __init netstar_init(void) /* Switch off red LED */ omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ omap_writeb(0x80, OMAP_LPG1_LCR); -} -static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; + omap_board_config = netstar_config; + omap_board_config_size = ARRAY_SIZE(netstar_config); + omap_serial_init(); +} static void __init netstar_map_io(void) { omap_map_common_io(); - omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a88524e7c31..e990e1bc166 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -46,8 +46,6 @@ #include <asm/arch/tc.h> #include <asm/arch/common.h> -static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; - static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -155,7 +153,7 @@ static void __init osk_init_smc91x(void) } /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ - EMIFS_CCS(1) |= 0x2; + EMIFS_CCS(1) |= 0x3; } static void __init osk_init_cf(void) @@ -193,8 +191,19 @@ static struct omap_usb_config osk_usb_config __initdata = { .pins[0] = 2, }; +static struct omap_uart_config osk_uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static struct omap_lcd_config osk_lcd_config __initdata = { + .panel_name = "osk", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, + { OMAP_TAG_UART, &osk_uart_config }, + { OMAP_TAG_LCD, &osk_lcd_config }, }; #ifdef CONFIG_OMAP_OSK_MISTRAL @@ -254,13 +263,13 @@ static void __init osk_init(void) omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + omap_serial_init(); osk_mistral_init(); } static void __init osk_map_io(void) { omap_map_common_io(); - omap_serial_init(osk_serial_ports); } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c new file mode 100644 index 00000000000..540b20d78cc --- /dev/null +++ b/arch/arm/mach-omap1/board-palmte.c @@ -0,0 +1,87 @@ +/* + * linux/arch/arm/mach-omap1/board-palmte.c + * + * Modified from board-generic.c + * + * Support for the Palm Tungsten E PDA. + * + * Original version : Laurent Gonzalez + * + * Maintainters : http://palmtelinux.sf.net + * palmtelinux-developpers@lists.sf.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/notifier.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/hardware/clock.h> + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_usb_config palmte_usb_config __initdata = { + .register_dev = 1, + .hmc_mode = 0, + .pins[0] = 3, +}; + +static struct omap_mmc_config palmte_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config palmte_lcd_config __initdata = { + .panel_name = "palmte", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel palmte_config[] = { + { OMAP_TAG_USB, &palmte_usb_config }, + { OMAP_TAG_MMC, &palmte_mmc_config }, + { OMAP_TAG_LCD, &palmte_lcd_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = palmte_config; + omap_board_config_size = ARRAY_SIZE(palmte_config); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 354b157acb3..bd900b7ab33 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -29,6 +29,7 @@ #include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/common.h> +#include <asm/arch/board.h> static struct resource smc91x_resources[] = { [0] = { @@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = { }, }; -static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0}; - static struct mtd_partition p2_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; +static struct omap_uart_config perseus2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1)), +}; + +static struct omap_lcd_config perseus2_lcd_config __initdata = { + .panel_name = "p2", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel perseus2_config[] = { + { OMAP_TAG_UART, &perseus2_uart_config }, + { OMAP_TAG_LCD, &perseus2_lcd_config }, +}; + static void __init omap_perseus2_init(void) { (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + + omap_board_config = perseus2_config; + omap_board_config_size = ARRAY_SIZE(perseus2_config); + omap_serial_init(); } static void __init perseus2_init_smc91x(void) @@ -131,7 +148,6 @@ void omap_perseus2_init_irq(void) omap_gpio_init(); perseus2_init_smc91x(); } - /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { @@ -179,7 +195,6 @@ static void __init omap_perseus2_map_io(void) * It is used as the Ethernet controller interrupt */ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); - omap_serial_init(p2_serial_ports); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 3f018b29686..6f9a6220e78 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -150,9 +150,14 @@ static struct omap_mmc_config voiceblue_mmc_config __initdata = { }, }; +static struct omap_uart_config voiceblue_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, { OMAP_TAG_MMC, &voiceblue_mmc_config }, + { OMAP_TAG_UART, &voiceblue_uart_config }, }; static void __init voiceblue_init_irq(void) @@ -191,6 +196,7 @@ static void __init voiceblue_init(void) platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); + omap_serial_init(); /* There is a good chance board is going up, so enable power LED * (it is connected through invertor) */ @@ -198,12 +204,9 @@ static void __init voiceblue_init(void) omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ } -static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static void __init voiceblue_map_io(void) { omap_map_common_io(); - omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c new file mode 100644 index 00000000000..4277eee44ed --- /dev/null +++ b/arch/arm/mach-omap1/clock.c @@ -0,0 +1,792 @@ +/* + * linux/arch/arm/mach-omap1/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * + * Modified to use omap shared clock framework by + * Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/usb.h> +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> + +#include "clock.h" + +__u32 arm_idlect1_mask; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ + +static void omap1_watchdog_recalc(struct clk * clk) +{ + clk->rate = clk->parent->rate / 14; +} + +static void omap1_uart_recalc(struct clk * clk) +{ + unsigned int val = omap_readl(clk->enable_reg); + if (val & clk->enable_bit) + clk->rate = 48000000; + else + clk->rate = 12000000; +} + +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_use(&api_ck.clk); + if (!retval) { + retval = omap1_clk_enable(clk); + omap1_clk_unuse(&api_ck.clk); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_use(&api_ck.clk) == 0) { + omap1_clk_disable(clk); + omap1_clk_unuse(&api_ck.clk); + } +} + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable(clk); +} + +static void omap1_clk_allow_idle(struct clk *clk) +{ + struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; + + if (!(clk->flags & CLOCK_IDLE_CONTROL)) + return; + + if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count)) + arm_idlect1_mask |= 1 << iclk->idlect_shift; +} + +static void omap1_clk_deny_idle(struct clk *clk) +{ + struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; + + if (!(clk->flags & CLOCK_IDLE_CONTROL)) + return; + + if (iclk->no_idle_count++ == 0) + arm_idlect1_mask &= ~(1 << iclk->idlect_shift); +} + +static __u16 verify_ckctl_value(__u16 newval) +{ + /* This function checks for following limitations set + * by the hardware (all conditions must be true): + * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 + * ARM_CK >= TC_CK + * DSP_CK >= TC_CK + * DSPMMU_CK >= TC_CK + * + * In addition following rules are enforced: + * LCD_CK <= TC_CK + * ARMPER_CK <= TC_CK + * + * However, maximum frequencies are not checked for! + */ + __u8 per_exp; + __u8 lcd_exp; + __u8 arm_exp; + __u8 dsp_exp; + __u8 tc_exp; + __u8 dspmmu_exp; + + per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; + lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; + arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; + dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; + tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; + dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; + + if (dspmmu_exp < dsp_exp) + dspmmu_exp = dsp_exp; + if (dspmmu_exp > dsp_exp+1) + dspmmu_exp = dsp_exp+1; + if (tc_exp < arm_exp) + tc_exp = arm_exp; + if (tc_exp < dspmmu_exp) + tc_exp = dspmmu_exp; + if (tc_exp > lcd_exp) + lcd_exp = tc_exp; + if (tc_exp > per_exp) + per_exp = tc_exp; + + newval &= 0xf000; + newval |= per_exp << CKCTL_PERDIV_OFFSET; + newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; + newval |= arm_exp << CKCTL_ARMDIV_OFFSET; + newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; + newval |= tc_exp << CKCTL_TCDIV_OFFSET; + newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; + + return newval; +} + +static int calc_dsor_exp(struct clk *clk, unsigned long rate) +{ + /* Note: If target frequency is too low, this function will return 4, + * which is invalid value. Caller must check for this value and act + * accordingly. + * + * Note: This function does not check for following limitations set + * by the hardware (all conditions must be true): + * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 + * ARM_CK >= TC_CK + * DSP_CK >= TC_CK + * DSPMMU_CK >= TC_CK + */ + unsigned long realrate; + struct clk * parent; + unsigned dsor_exp; + + if (unlikely(!(clk->flags & RATE_CKCTL))) + return -EINVAL; + + parent = clk->parent; + if (unlikely(parent == 0)) + return -EIO; + + realrate = parent->rate; + for (dsor_exp=0; dsor_exp<4; dsor_exp++) { + if (realrate <= rate) + break; + + realrate /= 2; + } + + return dsor_exp; +} + +static void omap1_ckctl_recalc(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent */ + dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); + + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent + * + * The clock control bits are in DSP domain, + * so api_ck is needed for access. + * Note that DSP_CKCTL virt addr = phys addr, so + * we must use __raw_readw() instead of omap_readw(). + */ + omap1_clk_use(&api_ck.clk); + dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); + omap1_clk_unuse(&api_ck.clk); + + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +/* MPU virtual clock functions */ +static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +{ + /* Find the highest supported frequency <= rate and switch to it */ + struct mpu_rate * ptr; + + if (clk != &virtual_ck_mpu) + return -EINVAL; + + for (ptr = rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ck_ref.rate) + continue; + + /* DPLL1 cannot be reprogrammed without risking system crash */ + if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + continue; + + /* Can check only after xtal frequency check */ + if (ptr->rate <= rate) + break; + } + + if (!ptr->rate) + return -EINVAL; + + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + + ck_dpll1.rate = ptr->pll_rate; + propagate_rate(&ck_dpll1); + return 0; +} + +static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + int dsor_exp; + __u16 regval; + + if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = __raw_readw(DSP_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + __raw_writew(regval, DSP_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + ret = 0; + } + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +{ + /* Find the highest supported frequency <= rate */ + struct mpu_rate * ptr; + long highest_rate; + + if (clk != &virtual_ck_mpu) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ck_ref.rate) + continue; + + highest_rate = ptr->rate; + + /* Can check only after xtal frequency check */ + if (ptr->rate <= rate) + break; + } + + return highest_rate; +} + +static unsigned calc_ext_dsor(unsigned long rate) +{ + unsigned dsor; + + /* MCLK and BCLK divisor selection is not linear: + * freq = 96MHz / dsor + * + * RATIO_SEL range: dsor <-> RATIO_SEL + * 0..6: (RATIO_SEL+2) <-> (dsor-2) + * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) + * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 + * can not be used. + */ + for (dsor = 2; dsor < 96; ++dsor) { + if ((dsor & 1) && dsor > 8) + continue; + if (rate >= 96000000 / dsor) + break; + } + return dsor; +} + +/* Only needed on 1510 */ +static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +{ + unsigned int val; + + val = omap_readl(clk->enable_reg); + if (rate == 12000000) + val &= ~(1 << clk->enable_bit); + else if (rate == 48000000) + val |= (1 << clk->enable_bit); + else + return -EINVAL; + omap_writel(val, clk->enable_reg); + clk->rate = rate; + + return 0; +} + +/* External clock (MCLK & BCLK) functions */ +static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +{ + unsigned dsor; + __u16 ratio_bits; + + dsor = calc_ext_dsor(rate); + clk->rate = 96000000 / dsor; + if (dsor > 8) + ratio_bits = ((dsor - 8) / 2 + 6) << 2; + else + ratio_bits = (dsor - 2) << 2; + + ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; + omap_writew(ratio_bits, clk->enable_reg); + + return 0; +} + +static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +{ + return 96000000 / calc_ext_dsor(rate); +} + +static void omap1_init_ext_clk(struct clk * clk) +{ + unsigned dsor; + __u16 ratio_bits; + + /* Determine current rate and ensure clock is based on 96MHz APLL */ + ratio_bits = omap_readw(clk->enable_reg) & ~1; + omap_writew(ratio_bits, clk->enable_reg); + + ratio_bits = (ratio_bits & 0xfc) >> 2; + if (ratio_bits > 6) + dsor = (ratio_bits - 6) * 2 + 8; + else + dsor = ratio_bits + 2; + + clk-> rate = 96000000 / dsor; +} + +static int omap1_clk_use(struct clk *clk) +{ + int ret = 0; + if (clk->usecount++ == 0) { + if (likely(clk->parent)) { + ret = omap1_clk_use(clk->parent); + + if (unlikely(ret != 0)) { + clk->usecount--; + return ret; + } + + if (clk->flags & CLOCK_NO_IDLE_PARENT) + if (!cpu_is_omap24xx()) + omap1_clk_deny_idle(clk->parent); + } + + ret = clk->enable(clk); + + if (unlikely(ret != 0) && clk->parent) { + omap1_clk_unuse(clk->parent); + clk->usecount--; + } + } + + return ret; +} + +static void omap1_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + clk->disable(clk); + if (likely(clk->parent)) { + omap1_clk_unuse(clk->parent); + if (clk->flags & CLOCK_NO_IDLE_PARENT) + if (!cpu_is_omap24xx()) + omap1_clk_allow_idle(clk->parent); + } + } +} + +static int omap1_clk_enable(struct clk *clk) +{ + __u16 regval16; + __u32 regval32; + + if (clk->flags & ALWAYS_ENABLED) + return 0; + + if (unlikely(clk->enable_reg == 0)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; + } + + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + return 0; +} + +static void omap1_clk_disable(struct clk *clk) +{ + __u16 regval16; + __u32 regval32; + + if (clk->enable_reg == 0) + return; + + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } +} + +static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +{ + int dsor_exp; + + if (clk->flags & RATE_FIXED) + return clk->rate; + + if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp < 0) + return dsor_exp; + if (dsor_exp > 3) + dsor_exp = 3; + return clk->parent->rate / (1 << dsor_exp); + } + + if(clk->round_rate != 0) + return clk->round_rate(clk, rate); + + return clk->rate; +} + +static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + int dsor_exp; + __u16 regval; + + if (clk->set_rate) + ret = clk->set_rate(clk, rate); + else if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = omap_readw(ARM_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + regval = verify_ckctl_value(regval); + omap_writew(regval, ARM_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + ret = 0; + } + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +/*------------------------------------------------------------------------- + * Omap1 clock reset and init functions + *-------------------------------------------------------------------------*/ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. See also omap_late_clk_reset(). + */ +static inline void omap1_early_clk_reset(void) +{ + //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +} + +static int __init omap1_late_clk_reset(void) +{ + /* Turn off all unused clocks */ + struct clk *p; + __u32 regval32; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); + + list_for_each_entry(p, &clocks, node) { + if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || + p->enable_reg == 0) + continue; + + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)p->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", p->name); + continue; + } + + /* Is the clock already disabled? */ + if (p->flags & ENABLE_REG_32BIT) { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(p->enable_reg); + else + regval32 = omap_readl(p->enable_reg); + } else { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(p->enable_reg); + else + regval32 = omap_readw(p->enable_reg); + } + + if ((regval32 & (1 << p->enable_bit)) == 0) + continue; + + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || p == &ck_dpll1out.clk // FIX: SoSSI, SSR + || p == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + p->name); + continue; + } + + printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); + p->disable(p); + printk(" done\n"); + } + + return 0; +} +late_initcall(omap1_late_clk_reset); + +#else +#define omap1_early_clk_reset() {} +#endif + +static struct clk_functions omap1_clk_functions = { + .clk_use = omap1_clk_use, + .clk_unuse = omap1_clk_unuse, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, +}; + +int __init omap1_clk_init(void) +{ + struct clk ** clkp; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + + omap1_early_clk_reset(); + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { + if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { + clk_register(*clkp); + continue; + } + + if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { + clk_register(*clkp); + continue; + } + + if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { + clk_register(*clkp); + continue; + } + } + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap1510()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } + propagate_rate(&ck_dpll1); +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + propagate_rate(&ck_dpll1); + } +#endif + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); +#endif + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_use(&armper_ck.clk); + clk_use(&armxor_ck.clk); + clk_use(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap1510()) + clk_enable(&arm_gpio_ck); + + return 0; +} + diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h new file mode 100644 index 00000000000..f3bdfb50e01 --- /dev/null +++ b/arch/arm/mach-omap1/clock.h @@ -0,0 +1,768 @@ +/* + * linux/arch/arm/mach-omap1/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H +#define __ARCH_ARM_MACH_OMAP1_CLOCK_H + +static int omap1_clk_enable(struct clk * clk); +static void omap1_clk_disable(struct clk * clk); +static void omap1_ckctl_recalc(struct clk * clk); +static void omap1_watchdog_recalc(struct clk * clk); +static void omap1_ckctl_recalc_dsp_domain(struct clk * clk); +static int omap1_clk_enable_dsp_domain(struct clk * clk); +static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); +static void omap1_clk_disable_dsp_domain(struct clk * clk); +static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); +static void omap1_uart_recalc(struct clk * clk); +static int omap1_clk_enable_uart_functional(struct clk * clk); +static void omap1_clk_disable_uart_functional(struct clk * clk); +static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); +static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); +static void omap1_init_ext_clk(struct clk * clk); +static int omap1_select_table_rate(struct clk * clk, unsigned long rate); +static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); +static int omap1_clk_use(struct clk *clk); +static void omap1_clk_unuse(struct clk *clk); + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +struct uart_clk { + struct clk clk; + unsigned long sysc_addr; +}; + +/* Provide a method for preventing idling some ARM IDLECT clocks */ +struct arm_idlect1_clk { + struct clk clk; + unsigned long no_idle_count; + __u8 idlect_shift; +}; + +/* ARM_CKCTL bit shifts */ +#define CKCTL_PERDIV_OFFSET 0 +#define CKCTL_LCDDIV_OFFSET 2 +#define CKCTL_ARMDIV_OFFSET 4 +#define CKCTL_DSPDIV_OFFSET 6 +#define CKCTL_TCDIV_OFFSET 8 +#define CKCTL_DSPMMUDIV_OFFSET 10 +/*#define ARM_TIMXO 12*/ +#define EN_DSPCK 13 +/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ +/* DSP_CKCTL bit shifts */ +#define CKCTL_DSPPERDIV_OFFSET 0 + +/* ARM_IDLECT2 bit shifts */ +#define EN_WDTCK 0 +#define EN_XORPCK 1 +#define EN_PERCK 2 +#define EN_LCDCK 3 +#define EN_LBCK 4 /* Not on 1610/1710 */ +/*#define EN_HSABCK 5*/ +#define EN_APICK 6 +#define EN_TIMCK 7 +#define DMACK_REQ 8 +#define EN_GPIOCK 9 /* Not on 1610/1710 */ +/*#define EN_LBFREECK 10*/ +#define EN_CKOUT_ARM 11 + +/* ARM_IDLECT3 bit shifts */ +#define EN_OCPI_CK 0 +#define EN_TC1_CK 2 +#define EN_TC2_CK 4 + +/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ +#define EN_DSPTIMCK 5 + +/* Various register defines for clock controls scattered around OMAP chip */ +#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ +#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ +#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ +#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ +#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 +#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 +#define SOFT_REQ_REG 0xfffe0834 +#define SOFT_REQ_REG2 0xfffe0880 + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +static struct mpu_rate rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + +/*------------------------------------------------------------------------- + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +static struct clk ck_ref = { + .name = "ck_ref", + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_PROPAGATES | ALWAYS_ENABLED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 12, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 2, +}; + +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .parent = &arm_ck, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL, + .enable_reg = (void __iomem *)ARM_CKCTL, + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | ALWAYS_ENABLED, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .set_rate = &omap1_clk_set_rate_dsp_domain, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IN_OMAP730 | RATE_CKCTL | + RATE_PROPAGATES | ALWAYS_ENABLED | + CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tibp_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tc2_ck = { + .name = "tc2_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | RATE_CKCTL | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 29, + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ENABLE_REG_32BIT | ALWAYS_ENABLED | + CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 31, + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, + .enable_bit = USB_MCLK_EN_BIT, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = CLOCK_IN_OMAP1510 | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = USB_HOST_HHC_UHOST_EN, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, + .enable_bit = 8 /* UHOST_EN */, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = (void __iomem *)SOFT_REQ_REG, + .enable_bit = 4, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mmc1_ck = { + .name = "mmc1_ck", + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 23, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mmc2_ck = { + .name = "mmc2_ck", + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 20, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | ALWAYS_ENABLED, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk * onchip_clks[] = { + /* non-ULPD clocks */ + &ck_ref, + &ck_dpll1, + /* CK_GEN1 clocks */ + &ck_dpll1out.clk, + &arm_ck, + &armper_ck.clk, + &arm_gpio_ck, + &armxor_ck.clk, + &armtim_ck.clk, + &armwdt_ck.clk, + &arminth_ck1510, &arminth_ck16xx, + /* CK_GEN2 clocks */ + &dsp_ck, + &dspmmu_ck, + &dspper_ck, + &dspxor_ck, + &dsptim_ck, + /* CK_GEN3 clocks */ + &tc_ck.clk, + &tipb_ck, + &l3_ocpi_ck, + &tc1_ck, + &tc2_ck, + &dma_ck, + &dma_lcdfree_ck, + &api_ck.clk, + &lb_ck.clk, + &rhea1_ck, + &rhea2_ck, + &lcd_ck_16xx, + &lcd_ck_1510.clk, + /* ULPD clocks */ + &uart1_1510, + &uart1_16xx.clk, + &uart2_ck, + &uart3_1510, + &uart3_16xx.clk, + &usb_clko, + &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, + &mclk_1510, &mclk_16xx, + &bclk_1510, &bclk_16xx, + &mmc1_ck, + &mmc2_ck, + /* Virtual clocks */ + &virtual_ck_mpu, +}; + +#endif diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 3c5d901efea..ecbc47514ad 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -25,56 +25,7 @@ #include <asm/arch/mux.h> #include <asm/arch/gpio.h> - -static void omap_nop_release(struct device *dev) -{ - /* Nothing */ -} - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP_I2C_BASE 0xfffb3800 - -static struct resource i2c_resources[] = { - { - .start = OMAP_I2C_BASE, - .end = OMAP_I2C_BASE + 0x3f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -/* DMA not used; works around erratum writing to non-empty i2c fifo */ - -static struct platform_device omap_i2c_device = { - .name = "i2c_omap", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(i2c_resources), - .resource = i2c_resources, -}; - -static void omap_init_i2c(void) -{ - /* FIXME define and use a boot tag, in case of boards that - * either don't wire up I2C, or chips that mux it differently... - * it can include clocking and address info, maybe more. - */ - omap_cfg_reg(I2C_SCL); - omap_cfg_reg(I2C_SDA); - - (void) platform_device_register(&omap_i2c_device); -} -#else -static inline void omap_init_i2c(void) {} -#endif +extern void omap_nop_release(struct device *dev); /*-------------------------------------------------------------------------*/ @@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {} /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -#define OMAP_MMC1_BASE 0xfffb7800 -#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -static struct omap_mmc_conf mmc1_conf; - -static u64 mmc1_dmamask = 0xffffffff; - -static struct resource mmc1_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC1_BASE), - .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device1 = { - .name = "mmci-omap", - .id = 1, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, - }, - .num_resources = ARRAY_SIZE(mmc1_resources), - .resource = mmc1_resources, -}; - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct omap_mmc_conf mmc2_conf; - -static u64 mmc2_dmamask = 0xffffffff; - -static struct resource mmc2_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC2_BASE), - .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_1610_MMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device2 = { - .name = "mmci-omap", - .id = 2, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, - }, - .num_resources = ARRAY_SIZE(mmc2_resources), - .resource = mmc2_resources, -}; -#endif - -static void __init omap_init_mmc(void) -{ - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) - return; - - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); - if (cpu_is_omap1710()) { - omap_cfg_reg(M15_1710_MMC_CLKI); - omap_cfg_reg(P19_1710_MMC_CMDDIR); - omap_cfg_reg(P20_1710_MMC_DATDIR0); - } - if (mmc->wire4) { - omap_cfg_reg(MMC_DAT1); - /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) - omap_cfg_reg(MMC_DAT2); - omap_cfg_reg(MMC_DAT3); - } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); - } - -#ifdef CONFIG_ARCH_OMAP16XX - /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { - omap_cfg_reg(Y8_1610_MMC2_CMD); - omap_cfg_reg(Y10_1610_MMC2_CLK); - omap_cfg_reg(R18_1610_MMC2_CLKIN); - omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { - omap_cfg_reg(V8_1610_MMC2_DAT1); - omap_cfg_reg(W15_1610_MMC2_DAT2); - omap_cfg_reg(R10_1610_MMC2_DAT3); - } - - /* These are needed for the level shifter */ - omap_cfg_reg(V9_1610_MMC2_CMDDIR); - omap_cfg_reg(V5_1610_MMC2_DATDIR0); - omap_cfg_reg(W19_1610_MMC2_DATDIR1); - } - - /* Feedback clock must be set on OMAP-1710 MMC2 */ - if (cpu_is_omap1710()) - omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), - MOD_CONF_CTRL_1); - mmc2_conf = *mmc; - (void) platform_device_register(&mmc_omap_device2); - } -#endif - return; -} -#else -static inline void omap_init_mmc(void) {} -#endif - #if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC) #define OMAP_RTC_BASE 0xfffb4800 @@ -279,38 +99,6 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE) - -#define OMAP_WDT_BASE 0xfffeb000 - -static struct resource wdt_resources[] = { - { - .start = OMAP_WDT_BASE, - .end = OMAP_WDT_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap1610_wdt", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - /*-------------------------------------------------------------------------*/ @@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {} * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. */ -static int __init omap_init_devices(void) +static int __init omap1_init_devices(void) { /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_i2c(); omap_init_irda(); - omap_init_mmc(); omap_init_rtc(); - omap_init_wdt(); return 0; } -arch_initcall(omap_init_devices); +arch_initcall(omap1_init_devices); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 986c3b7e09b..5c637c04836 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -18,6 +18,13 @@ #include <asm/io.h> +#define OMAP_DIE_ID_0 0xfffe1800 +#define OMAP_DIE_ID_1 0xfffe1804 +#define OMAP_PRODUCTION_ID_0 0xfffe2000 +#define OMAP_PRODUCTION_ID_1 0xfffe2004 +#define OMAP32_ID_0 0xfffed400 +#define OMAP32_ID_1 0xfffed404 + struct omap_id { u16 jtag_id; /* Used to determine OMAP type */ u8 die_rev; /* Processor revision */ @@ -27,6 +34,7 @@ struct omap_id { /* Register values to detect the OMAP version */ static struct omap_id omap_ids[] __initdata = { + { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, @@ -164,6 +172,7 @@ void __init omap_check_revision(void) case 0x07: system_rev |= 0x07; break; + case 0x03: case 0x15: system_rev |= 0x15; break; diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 79fb86535eb..a7a19f75b9e 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,9 +15,10 @@ #include <asm/mach/map.h> #include <asm/io.h> +#include <asm/arch/mux.h> #include <asm/arch/tc.h> -extern int clk_init(void); +extern int omap1_clk_init(void); extern void omap_check_revision(void); extern void omap_sram_init(void); @@ -50,7 +51,7 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { .virtual = OMAP1510_DSP_BASE, @@ -98,7 +99,7 @@ static void __init _omap_map_io(void) iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); } @@ -119,7 +120,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ - clk_init(); + omap1_clk_init(); } /* @@ -127,7 +128,9 @@ static void __init _omap_map_io(void) */ void __init omap_map_common_io(void) { - if (!initialized) + if (!initialized) { _omap_map_io(); + omap1_mux_init(); + } } diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 192ce6055fa..ed65a7d2e94 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -47,6 +47,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/arch/gpio.h> +#include <asm/arch/cpu.h> #include <asm/io.h> @@ -147,11 +148,15 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, }; +static struct omap_irq_bank omap310_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, +}; #endif #if defined(CONFIG_ARCH_OMAP16XX) @@ -181,11 +186,15 @@ void __init omap_init_irq(void) irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); } + if (cpu_is_omap310()) { + irq_banks = omap310_irq_banks; + irq_bank_count = ARRAY_SIZE(omap310_irq_banks); + } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { @@ -226,9 +235,11 @@ void __init omap_init_irq(void) } /* Unmask level 2 handler */ - if (cpu_is_omap730()) { + + if (cpu_is_omap730()) omap_unmask_irq(INT_730_IH2_IRQ); - } else { - omap_unmask_irq(INT_IH2_IRQ); - } + else if (cpu_is_omap1510()) + omap_unmask_irq(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + omap_unmask_irq(INT_1610_IH2_IRQ); } diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index be283cda63d..65065081591 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -13,12 +13,12 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> -#include <linux/version.h> #include <asm/io.h> #include <asm/hardware.h> #include <asm/leds.h> #include <asm/system.h> +#include <asm/mach-types.h> #include <asm/arch/fpga.h> #include <asm/arch/gpio.h> @@ -64,14 +64,19 @@ void h2p2_dbg_leds_event(led_event_t evt) case led_stop: case led_halted: /* all leds off during suspend or shutdown */ - omap_set_gpio_dataout(GPIO_TIMER, 0); - omap_set_gpio_dataout(GPIO_IDLE, 0); + + if (! machine_is_omap_perseus2()) { + omap_set_gpio_dataout(GPIO_TIMER, 0); + omap_set_gpio_dataout(GPIO_IDLE, 0); + } + __raw_writew(~0, &fpga->leds); led_state &= ~LED_STATE_ENABLED; if (evt == led_halted) { iounmap(fpga); fpga = NULL; } + goto done; case led_claim: @@ -86,18 +91,37 @@ void h2p2_dbg_leds_event(led_event_t evt) #ifdef CONFIG_LEDS_TIMER case led_timer: led_state ^= LED_TIMER_ON; - omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); - goto done; + + if (machine_is_omap_perseus2()) + hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; + else { + omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); + goto done; + } + + break; #endif #ifdef CONFIG_LEDS_CPU case led_idle_start: - omap_set_gpio_dataout(GPIO_IDLE, 1); - goto done; + if (machine_is_omap_perseus2()) + hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; + else { + omap_set_gpio_dataout(GPIO_IDLE, 1); + goto done; + } + + break; case led_idle_end: - omap_set_gpio_dataout(GPIO_IDLE, 0); - goto done; + if (machine_is_omap_perseus2()) + hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; + else { + omap_set_gpio_dataout(GPIO_IDLE, 0); + goto done; + } + + break; #endif case led_green_on: @@ -136,7 +160,7 @@ void h2p2_dbg_leds_event(led_event_t evt) /* * Actually burn the LEDs */ - if (led_state & LED_STATE_CLAIMED) + if (led_state & LED_STATE_ENABLED) __raw_writew(~hw_led_state, &fpga->leds); done: diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 5c6b1bb6e72..3f9dcac4fd4 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -33,7 +33,6 @@ omap_leds_init(void) if (machine_is_omap_h2() || machine_is_omap_h3() - || machine_is_omap_perseus2() #ifdef CONFIG_OMAP_OSK_MISTRAL || machine_is_omap_osk() #endif diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c new file mode 100644 index 00000000000..d4b8d624e74 --- /dev/null +++ b/arch/arm/mach-omap1/mux.c @@ -0,0 +1,289 @@ +/* + * linux/arch/arm/mach-omap1/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +#include <asm/arch/mux.h> + +#ifdef CONFIG_OMAP_MUX + +#ifdef CONFIG_ARCH_OMAP730 +struct pin_config __initdata_or_module omap730_pins[] = { +MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 0, 20, 1, NA, 0, 0) +MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 0, 24, 1, NA, 0, 0) +MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 0, 28, 1, NA, 0, 0) +MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 0, 1, NA, 0, 0) +MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 0, 4, 1, NA, 0, 0) +MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 0, 8, 1, NA, 0, 0) +MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 0, 12, 1, NA, 0, 0) +MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 0, 16, 1, NA, 0, 0) +MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 0, 20, 1, NA, 0, 0) +MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 0, 24, 1, NA, 0, 0) +}; +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) +struct pin_config __initdata_or_module omap1xxx_pins[] = { +/* + * description mux mode mux pull pull pull pu_pd pu dbg + * reg offset mode reg bit ena reg + */ +MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0) +MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0) + +/* UART2 (COM_UART_GATING), conflicts with USB2 */ +MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0) +MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0) + +/* UART3 (GIGA_UART_GATING) */ +MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0) +MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0) +MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0) +MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0) +MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0) +MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) +MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) + +/* PWT & PWL, conflicts with UART3 */ +MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) +MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) + +/* USB internal master generic */ +MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) +MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) +/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */ +MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1) +MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) +MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1) +MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1) + +/* USB1 master */ +MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) +MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) +MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1) +MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) +MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) +MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) +MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) +MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) +MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1) + +/* USB2 master */ +MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) +MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1) +MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1) +MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1) +MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1) +MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1) +MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1) + +/* OMAP-1510 GPIO */ +MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1) +MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1) +MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1) + +/* OMAP1610 GPIO */ +MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1) +MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1) + +/* OMAP-1710 GPIO */ +MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1) +MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1) +MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) +MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) + +/* MPUIO */ +MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1) +MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1) +MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) +MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) + +MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1) +MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1) +MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1) +MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1) +MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1) +MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1) + +/* MCBSP2 */ +MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1) +MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1) + +/* MCBSP3 NOTE: Mode must 1 for clock */ +MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) + +/* Misc ballouts */ +MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) +MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) + +/* OMAP-1610 MMC2 */ +MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) +MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1) +MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1) +MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1) +MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1) +MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1) +MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1) +MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1) +MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1) +MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1) + +/* OMAP-1610 External Trace Interface */ +MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1) +MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1) +MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1) +MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) +MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) +MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) + +/* OMAP16XX GPIO */ +MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) +MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) +MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) +MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1) +MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) +MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) +MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) +MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) +MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) +MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) +MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0) +MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0) +MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0) + +/* OMAP-1610 uWire */ +MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) +MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) +MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) +MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) +MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) +MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) + +/* OMAP-1610 Flash */ +MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) + +/* First MMC interface, same on 1510, 1610 and 1710 */ +MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) +MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1) +MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1) +MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1) +MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1) +MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1) +MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1) +MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1) +MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1) + +/* OMAP-1610 USB0 alternate configuration */ +MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1) +MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1) +MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1) +MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1) +MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1) +MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1) +MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1) +MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) + +/* USB2 interface */ +MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) +MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) + +/* 16XX UART */ +MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) +MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) +MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) +MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) +MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1) +MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1) + +/* I2C interface */ +MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0) + +/* Keypad */ +MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0) +MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0) +MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0) +MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0) +MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0) +MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0) +MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0) +MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0) +MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0) +MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0) +MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0) + +/* Power management */ +MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0) + +/* MCLK Settings */ +MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0) +MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0) +MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1) + +/* CompactFlash controller, conflicts with MMC1 */ +MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1) +MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) +MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) +MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) +}; +#endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ + +int __init omap1_mux_init(void) +{ + +#ifdef CONFIG_ARCH_OMAP730 + omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins)); +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) + omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins)); +#endif + + return 0; +} + +#endif diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 40c4f7c40e7..6810cfb8446 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -109,9 +109,10 @@ static struct platform_device serial_device = { * By default UART2 does not work on Innovator-1510 if you have * USB OHCI enabled. To use UART2, you must disable USB2 first. */ -void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) +void __init omap_serial_init(void) { int i; + const struct omap_uart_config *info; if (cpu_is_omap730()) { serial_platform_data[0].regshift = 0; @@ -126,10 +127,14 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; } + info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + if (info == NULL) + return; + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { unsigned char reg; - if (ports[i] == 0) { + if (!((1 << i) & info->enabled_uarts)) { serial_platform_data[i].membase = NULL; serial_platform_data[i].mapbase = 0; continue; diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 191a9b1ee9b..cdbf4d7620c 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -226,8 +226,8 @@ unsigned long long sched_clock(void) #ifdef CONFIG_OMAP_32K_TIMER -#ifdef CONFIG_ARCH_OMAP1510 -#error OMAP 32KHz timer does not currently work on 1510! +#ifdef CONFIG_ARCH_OMAP15XX +#error OMAP 32KHz timer does not currently work on 15XX! #endif /* diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig new file mode 100644 index 00000000000..578880943cf --- /dev/null +++ b/arch/arm/mach-omap2/Kconfig @@ -0,0 +1,22 @@ +comment "OMAP Core Type" + depends on ARCH_OMAP2 + +config ARCH_OMAP24XX + bool "OMAP24xx Based System" + depends on ARCH_OMAP2 + +config ARCH_OMAP2420 + bool "OMAP2420 support" + depends on ARCH_OMAP24XX + +comment "OMAP Board Type" + depends on ARCH_OMAP2 + +config MACH_OMAP_GENERIC + bool "Generic OMAP board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + +config MACH_OMAP_H4 + bool "OMAP 2420 H4 board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile new file mode 100644 index 00000000000..42041166435 --- /dev/null +++ b/arch/arm/mach-omap2/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o + +obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o + +# Specific board support +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o + diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot new file mode 100644 index 00000000000..565aff7f37a --- /dev/null +++ b/arch/arm/mach-omap2/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c new file mode 100644 index 00000000000..c602e7a3d93 --- /dev/null +++ b/arch/arm/mach-omap2/board-generic.c @@ -0,0 +1,80 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-generic.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * Code for generic OMAP2 board. Should work on many OMAP2 systems where + * the bootloader passes the board-specific data to the kernel. + * Do not put any board specific code to this file; create a new machine + * type if you need custom low-level initializations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_board_config_kernel generic_config[] = { + { OMAP_TAG_UART, &generic_uart_config }, + { OMAP_TAG_MMC, &generic_mmc_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = generic_config; + omap_board_config_size = ARRAY_SIZE(generic_config); + omap_serial_init(); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c new file mode 100644 index 00000000000..f2554469a76 --- /dev/null +++ b/arch/arm/mach-omap2/board-h4.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-h4.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/prcm.h> + +#include <asm/io.h> +#include <asm/delay.h> + +static struct mtd_partition h4_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data h4_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = h4_partitions, + .nr_parts = ARRAY_SIZE(h4_partitions), +}; + +static struct resource h4_flash_resource = { + .start = H4_CS0_BASE, + .end = H4_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h4_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &h4_flash_data, + }, + .num_resources = 1, + .resource = &h4_flash_resource, +}; + +static struct resource h4_smc91x_resources[] = { + [0] = { + .start = OMAP24XX_ETHR_START, /* Physical */ + .end = OMAP24XX_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(h4_smc91x_resources), + .resource = h4_smc91x_resources, +}; + +static struct platform_device *h4_devices[] __initdata = { + &h4_smc91x_device, + &h4_flash_device, +}; + +static inline void __init h4_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011200; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + udelay(100); + + omap_cfg_reg(M15_24XX_GPIO92); + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_h4_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + h4_init_smc91x(); +} + +static struct omap_uart_config h4_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config h4_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config h4_lcd_config __initdata = { + .panel_name = "h4", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel h4_config[] = { + { OMAP_TAG_UART, &h4_uart_config }, + { OMAP_TAG_MMC, &h4_mmc_config }, + { OMAP_TAG_LCD, &h4_lcd_config }, +}; + +static void __init omap_h4_init(void) +{ + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); + omap_board_config = h4_config; + omap_board_config_size = ARRAY_SIZE(h4_config); + omap_serial_init(); +} + +static void __init omap_h4_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, + .init_machine = omap_h4_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c new file mode 100644 index 00000000000..85818d9f263 --- /dev/null +++ b/arch/arm/mach-omap2/clock.c @@ -0,0 +1,1129 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * Created for OMAP2. + * + * Cleaned up and modified to use omap shared clock framework by + * Tony Lindgren <tony@atomide.com> + * + * Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> + +#include <asm/io.h> + +#include <asm/hardware/clock.h> +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> +#include <asm/arch/prcm.h> + +#include "clock.h" + +//#define DOWN_VARIABLE_DPLL 1 /* Experimental */ + +static struct prcm_config *curr_prcm_set; +static struct memory_timings mem_timings; +static u32 curr_perf_level = PRCM_FULL_SPEED; + +/*------------------------------------------------------------------------- + * Omap2 specific clock functions + *-------------------------------------------------------------------------*/ + +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk * clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} + +static u32 omap2_get_dpll_rate(struct clk * tclk) +{ + int dpll_clk, dpll_mult, dpll_div, amult; + + dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ + dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ + dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1); + amult = CM_CLKSEL2_PLL & 0x3; + dpll_clk *= amult; + + return dpll_clk; +} + +static void omap2_followparent_recalc(struct clk *clk) +{ + followparent_recalc(clk); +} + +static void omap2_propagate_rate(struct clk * clk) +{ + if (!(clk->flags & RATE_FIXED)) + clk->rate = clk->parent->rate; + + propagate_rate(clk); +} + +/* Enable an APLL if off */ +static void omap2_clk_fixed_enable(struct clk *clk) +{ + u32 cval, i=0; + + if (clk->enable_bit == 0xff) /* Parent will do it */ + return; + + cval = CM_CLKEN_PLL; + + if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit)) + return; + + cval &= ~(0x3 << clk->enable_bit); + cval |= (0x3 << clk->enable_bit); + CM_CLKEN_PLL = cval; + + if (clk == &apll96_ck) + cval = (1 << 8); + else if (clk == &apll54_ck) + cval = (1 << 6); + + while (!CM_IDLEST_CKGEN & cval) { /* Wait for lock */ + ++i; + udelay(1); + if (i == 100000) + break; + } +} + +/* Enables clock without considering parent dependencies or use count + * REVISIT: Maybe change this to use clk->enable like on omap1? + */ +static int omap2_clk_enable(struct clk * clk) +{ + u32 regval32; + + if (clk->flags & ALWAYS_ENABLED) + return 0; + + if (unlikely(clk->enable_reg == 0)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; + } + + if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { + omap2_clk_fixed_enable(clk); + return 0; + } + + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + + return 0; +} + +/* Stop APLL */ +static void omap2_clk_fixed_disable(struct clk *clk) +{ + u32 cval; + + if(clk->enable_bit == 0xff) /* let parent off do it */ + return; + + cval = CM_CLKEN_PLL; + cval &= ~(0x3 << clk->enable_bit); + CM_CLKEN_PLL = cval; +} + +/* Disables clock without considering parent dependencies or use count */ +static void omap2_clk_disable(struct clk *clk) +{ + u32 regval32; + + if (clk->enable_reg == 0) + return; + + if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { + omap2_clk_fixed_disable(clk); + return; + } + + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); +} + +static int omap2_clk_use(struct clk *clk) +{ + int ret = 0; + + if (clk->usecount++ == 0) { + if (likely((u32)clk->parent)) + ret = omap2_clk_use(clk->parent); + + if (unlikely(ret != 0)) { + clk->usecount--; + return ret; + } + + ret = omap2_clk_enable(clk); + + if (unlikely(ret != 0) && clk->parent) { + omap2_clk_unuse(clk->parent); + clk->usecount--; + } + } + + return ret; +} + +static void omap2_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + omap2_clk_disable(clk); + if (likely((u32)clk->parent)) + omap2_clk_unuse(clk->parent); + } +} + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +static u32 omap2_dpll_round_rate(unsigned long target_rate) +{ + u32 high, low; + + if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +/* + * Used for clocks that are part of CLKSEL_xyz governed clocks. + * REVISIT: Maybe change to use clk->enable() functions like on omap1? + */ +static void omap2_clksel_recalc(struct clk * clk) +{ + u32 fixed = 0, div = 0; + + if (clk == &dpll_ck) { + clk->rate = omap2_get_dpll_rate(clk); + fixed = 1; + div = 0; + } + + if (clk == &iva1_mpu_int_ifck) { + div = 2; + fixed = 1; + } + + if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) { + clk->rate = sys_ck.rate; + return; + } + + if (!fixed) { + div = omap2_clksel_get_divisor(clk); + if (div == 0) + return; + } + + if (div != 0) { + if (unlikely(clk->rate == clk->parent->rate / div)) + return; + clk->rate = clk->parent->rate / div; + } + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +/* + * Finds best divider value in an array based on the source and target + * rates. The divider array must be sorted with smallest divider first. + */ +static inline u32 omap2_divider_from_table(u32 size, u32 *div_array, + u32 src_rate, u32 tgt_rate) +{ + int i, test_rate; + + if (div_array == NULL) + return ~1; + + for (i=0; i < size; i++) { + test_rate = src_rate / *div_array; + if (test_rate <= tgt_rate) + return *div_array; + ++div_array; + } + + return ~0; /* No acceptable divider */ +} + +/* + * Find divisor for the given clock and target rate. + * + * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, + * they are only settable as part of virtual_prcm set. + */ +static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate, + u32 *new_div) +{ + u32 gfx_div[] = {2, 3, 4}; + u32 sysclkout_div[] = {1, 2, 4, 8, 16}; + u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16}; + u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18}; + u32 best_div = ~0, asize = 0; + u32 *div_array = NULL; + + switch (tclk->flags & SRC_RATE_SEL_MASK) { + case CM_GFX_SEL1: + asize = 3; + div_array = gfx_div; + break; + case CM_PLL_SEL1: + return omap2_dpll_round_rate(target_rate); + case CM_SYSCLKOUT_SEL1: + asize = 5; + div_array = sysclkout_div; + break; + case CM_CORE_SEL1: + if(tclk == &dss1_fck){ + if(tclk->parent == &core_ck){ + asize = 10; + div_array = dss1_div; + } else { + *new_div = 0; /* fixed clk */ + return(tclk->parent->rate); + } + } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){ + if(tclk->parent == &core_ck){ + asize = 10; + div_array = vylnq_div; + } else { + *new_div = 0; /* fixed clk */ + return(tclk->parent->rate); + } + } + break; + } + + best_div = omap2_divider_from_table(asize, div_array, + tclk->parent->rate, target_rate); + if (best_div == ~0){ + *new_div = 1; + return best_div; /* signal error */ + } + + *new_div = best_div; + return (tclk->parent->rate / best_div); +} + +/* Given a clock and a rate apply a clock specific rounding function */ +static long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div = 0; + int valid_rate; + + if (clk->flags & RATE_FIXED) + return clk->rate; + + if (clk->flags & RATE_CKCTL) { + valid_rate = omap2_clksel_round_rate(clk, rate, &new_div); + return valid_rate; + } + + if (clk->round_rate != 0) + return clk->round_rate(clk, rate); + + return clk->rate; +} + +/* + * Check the DLL lock state, and return tue if running in unlock mode. + * This is needed to compenste for the shifted DLL value in unlock mode. + */ +static u32 omap2_dll_force_needed(void) +{ + u32 dll_state = SDRC_DLLA_CTRL; /* dlla and dllb are a set */ + + if ((dll_state & (1 << 2)) == (1 << 2)) + return 1; + else + return 0; +} + +static void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +{ + unsigned long dll_cnt; + u32 fast_dll = 0; + + mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + + /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. + * In the case of 2422, its ok to use CS1 instead of CS0. + */ + +#if 0 /* FIXME: Enable after 24xx cpu detection works */ + ctype = get_cpu_type(); + if (cpu_is_omap2422()) + mem_timings.base_cs = 1; + else +#endif + mem_timings.base_cs = 0; + + if (mem_timings.m_type != M_DDR) + return; + + /* With DDR we need to determine the low frequency DLL value */ + if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) + mem_timings.dll_mode = M_UNLOCK; + else + mem_timings.dll_mode = M_LOCK; + + if (mem_timings.base_cs == 0) { + fast_dll = SDRC_DLLA_CTRL; + dll_cnt = SDRC_DLLA_STATUS & 0xff00; + } else { + fast_dll = SDRC_DLLB_CTRL; + dll_cnt = SDRC_DLLB_STATUS & 0xff00; + } + if (force_lock_to_unlock_mode) { + fast_dll &= ~0xff00; + fast_dll |= dll_cnt; /* Current lock mode */ + } + mem_timings.fast_dll_ctrl = fast_dll; + + /* No disruptions, DDR will be offline & C-ABI not followed */ + omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, + mem_timings.fast_dll_ctrl, + mem_timings.base_cs, + force_lock_to_unlock_mode); + mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ + + /* Turn status into unlock ctrl */ + mem_timings.slow_dll_ctrl |= + ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); + + /* 90 degree phase for anything below 133Mhz */ + mem_timings.slow_dll_ctrl |= (1 << 1); +} + +static u32 omap2_reprogram_sdrc(u32 level, u32 force) +{ + u32 prev = curr_perf_level, flags; + + if ((curr_perf_level == level) && !force) + return prev; + + if (level == PRCM_HALF_SPEED) { + local_irq_save(flags); + PRCM_VOLTSETUP = 0xffff; + omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED, + mem_timings.slow_dll_ctrl, + mem_timings.m_type); + curr_perf_level = PRCM_HALF_SPEED; + local_irq_restore(flags); + } + if (level == PRCM_FULL_SPEED) { + local_irq_save(flags); + PRCM_VOLTSETUP = 0xffff; + omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED, + mem_timings.fast_dll_ctrl, + mem_timings.m_type); + curr_perf_level = PRCM_FULL_SPEED; + local_irq_restore(flags); + } + + return prev; +} + +static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate) +{ + u32 flags, cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + int ret = -EINVAL; + + local_irq_save(flags); + cur_rate = omap2_get_dpll_rate(&dpll_ck); + mult = CM_CLKSEL2_PLL & 0x3; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpll_round_rate(rate); + if (valid_rate != rate) + goto dpll_exit; + + if ((CM_CLKSEL2_PLL & 0x3) == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL; + tmpset.cm_clksel1_pll &= ~(0x3FFF << 8); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL; + tmpset.cm_clksel2_pll &= ~0x3; + if (rate > low) { + tmpset.cm_clksel2_pll |= 0x2; + mult = ((rate / 2) / 1000000); + done_rate = PRCM_FULL_SPEED; + } else { + tmpset.cm_clksel2_pll |= 0x1; + mult = (rate / 1000000); + done_rate = PRCM_HALF_SPEED; + } + tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12)); + + /* Worst case */ + tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */ + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + } + omap2_clksel_recalc(&dpll_ck); + ret = 0; + +dpll_exit: + local_irq_restore(flags); + return(ret); +} + +/* Just return the MPU speed */ +static void omap2_mpu_recalc(struct clk * clk) +{ + clk->rate = curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate) +{ + struct prcm_config * ptr; + long highest_rate; + + if (clk != &virt_prcm_set) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (ptr->xtal_speed != sys_ck.rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* + * omap2_convert_field_to_div() - turn field value into integer divider + */ +static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val) +{ + u32 i; + u32 clkout_array[] = {1, 2, 4, 8, 16}; + + if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) { + for (i = 0; i < 5; i++) { + if (field_val == i) + return clkout_array[i]; + } + return ~0; + } else + return field_val; +} + +/* + * Returns the CLKSEL divider register value + * REVISIT: This should be cleaned up to work nicely with void __iomem * + */ +static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, + struct clk *clk) +{ + int ret = ~0; + u32 reg_val, div_off; + u32 div_addr = 0; + u32 mask = ~0; + + div_off = clk->rate_offset; + + switch ((*div_sel & SRC_RATE_SEL_MASK)) { + case CM_MPU_SEL1: + div_addr = (u32)&CM_CLKSEL_MPU; + mask = 0x1f; + break; + case CM_DSP_SEL1: + div_addr = (u32)&CM_CLKSEL_DSP; + if (cpu_is_omap2420()) { + if ((div_off == 0) || (div_off == 8)) + mask = 0x1f; + else if (div_off == 5) + mask = 0x3; + } else if (cpu_is_omap2430()) { + if (div_off == 0) + mask = 0x1f; + else if (div_off == 5) + mask = 0x3; + } + break; + case CM_GFX_SEL1: + div_addr = (u32)&CM_CLKSEL_GFX; + if (div_off == 0) + mask = 0x7; + break; + case CM_MODEM_SEL1: + div_addr = (u32)&CM_CLKSEL_MDM; + if (div_off == 0) + mask = 0xf; + break; + case CM_SYSCLKOUT_SEL1: + div_addr = (u32)&PRCM_CLKOUT_CTRL; + if ((div_off == 3) || (div_off = 11)) + mask= 0x3; + break; + case CM_CORE_SEL1: + div_addr = (u32)&CM_CLKSEL1_CORE; + switch (div_off) { + case 0: /* l3 */ + case 8: /* dss1 */ + case 15: /* vylnc-2420 */ + case 20: /* ssi */ + mask = 0x1f; break; + case 5: /* l4 */ + mask = 0x3; break; + case 13: /* dss2 */ + mask = 0x1; break; + case 25: /* usb */ + mask = 0xf; break; + } + } + + *field_mask = mask; + + if (unlikely(mask == ~0)) + div_addr = 0; + + *div_sel = div_addr; + + if (unlikely(div_addr == 0)) + return ret; + + /* Isolate field */ + reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off); + + /* Normalize back to divider value */ + reg_val >>= div_off; + + return reg_val; +} + +/* + * Return divider to be applied to parent clock. + * Return 0 on error. + */ +static u32 omap2_clksel_get_divisor(struct clk *clk) +{ + int ret = 0; + u32 div, div_sel, div_off, field_mask, field_val; + + /* isolate control register */ + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + + div_off = clk->rate_offset; + field_val = omap2_get_clksel(&div_sel, &field_mask, clk); + if (div_sel == 0) + return ret; + + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + div = omap2_clksel_to_divisor(div_sel, field_val); + + return div; +} + +/* Set the clock rate for a clock source */ +static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) + +{ + int ret = -EINVAL; + void __iomem * reg; + u32 div_sel, div_off, field_mask, field_val, reg_val, validrate; + u32 new_div = 0; + + if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) { + if (clk == &dpll_ck) + return omap2_reprogram_dpll(clk, rate); + + /* Isolate control register */ + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + div_off = clk->src_offset; + + validrate = omap2_clksel_round_rate(clk, rate, &new_div); + if(validrate != rate) + return(ret); + + field_val = omap2_get_clksel(&div_sel, &field_mask, clk); + if (div_sel == 0) + return ret; + + if(clk->flags & CM_SYSCLKOUT_SEL1){ + switch(new_div){ + case 16: field_val = 4; break; + case 8: field_val = 3; break; + case 4: field_val = 2; break; + case 2: field_val = 1; break; + case 1: field_val = 0; break; + } + } + else + field_val = new_div; + + reg = (void __iomem *)div_sel; + + reg_val = __raw_readl(reg); + reg_val &= ~(field_mask << div_off); + reg_val |= (field_val << div_off); + + __raw_writel(reg_val, reg); + clk->rate = clk->parent->rate / field_val; + + if (clk->flags & DELAYED_APP) + __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + ret = 0; + } else if (clk->set_rate != 0) + ret = clk->set_rate(clk, rate); + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +/* Converts encoded control register address into a full address */ +static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset, + struct clk *src_clk, u32 *field_mask) +{ + u32 val = ~0, src_reg_addr = 0, mask = 0; + + /* Find target control register.*/ + switch ((*type_to_addr & SRC_RATE_SEL_MASK)) { + case CM_CORE_SEL1: + src_reg_addr = (u32)&CM_CLKSEL1_CORE; + if (reg_offset == 13) { /* DSS2_fclk */ + mask = 0x1; + if (src_clk == &sys_ck) + val = 0; + if (src_clk == &func_48m_ck) + val = 1; + } else if (reg_offset == 8) { /* DSS1_fclk */ + mask = 0x1f; + if (src_clk == &sys_ck) + val = 0; + else if (src_clk == &core_ck) /* divided clock */ + val = 0x10; /* rate needs fixing */ + } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/ + mask = 0x1F; + if(src_clk == &func_96m_ck) + val = 0; + else if (src_clk == &core_ck) + val = 0x10; + } + break; + case CM_CORE_SEL2: + src_reg_addr = (u32)&CM_CLKSEL2_CORE; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &sys_ck) + val = 0x1; + if (src_clk == &alt_ck) + val = 0x2; + break; + case CM_WKUP_SEL1: + src_reg_addr = (u32)&CM_CLKSEL2_CORE; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &sys_ck) + val = 0x1; + if (src_clk == &alt_ck) + val = 0x2; + break; + case CM_PLL_SEL1: + src_reg_addr = (u32)&CM_CLKSEL1_PLL; + mask = 0x1; + if (reg_offset == 0x3) { + if (src_clk == &apll96_ck) + val = 0; + if (src_clk == &alt_ck) + val = 1; + } + else if (reg_offset == 0x5) { + if (src_clk == &apll54_ck) + val = 0; + if (src_clk == &alt_ck) + val = 1; + } + break; + case CM_PLL_SEL2: + src_reg_addr = (u32)&CM_CLKSEL2_PLL; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &dpll_ck) + val = 0x2; + break; + case CM_SYSCLKOUT_SEL1: + src_reg_addr = (u32)&PRCM_CLKOUT_CTRL; + mask = 0x3; + if (src_clk == &dpll_ck) + val = 0; + if (src_clk == &sys_ck) + val = 1; + if (src_clk == &func_54m_ck) + val = 2; + if (src_clk == &func_96m_ck) + val = 3; + break; + } + + if (val == ~0) /* Catch errors in offset */ + *type_to_addr = 0; + else + *type_to_addr = src_reg_addr; + *field_mask = mask; + + return val; +} + +static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) +{ + void __iomem * reg; + u32 src_sel, src_off, field_val, field_mask, reg_val, rate; + int ret = -EINVAL; + + if (unlikely(clk->flags & CONFIG_PARTICIPANT)) + return ret; + + if (clk->flags & SRC_SEL_MASK) { /* On-chip SEL collection */ + src_sel = (SRC_RATE_SEL_MASK & clk->flags); + src_off = clk->src_offset; + + if (src_sel == 0) + goto set_parent_error; + + field_val = omap2_get_src_field(&src_sel, src_off, new_parent, + &field_mask); + + reg = (void __iomem *)src_sel; + + if (clk->usecount > 0) + omap2_clk_disable(clk); + + /* Set new source value (previous dividers if any in effect) */ + reg_val = __raw_readl(reg) & ~(field_mask << src_off); + reg_val |= (field_val << src_off); + __raw_writel(reg_val, reg); + + if (clk->flags & DELAYED_APP) + __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + + if (clk->usecount > 0) + omap2_clk_enable(clk); + + clk->parent = new_parent; + + /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/ + if ((new_parent == &core_ck) && (clk == &dss1_fck)) + clk->rate = new_parent->rate / 0x10; + else + clk->rate = new_parent->rate; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); + + return 0; + } else { + clk->parent = new_parent; + rate = new_parent->rate; + omap2_clk_set_rate(clk, rate); + ret = 0; + } + + set_parent_error: + return ret; +} + +/* Sets basic clocks based on the specified rate */ +static int omap2_select_table_rate(struct clk * clk, unsigned long rate) +{ + u32 flags, cur_rate, done_rate, bypass = 0; + u8 cpu_mask = 0; + struct prcm_config *prcm; + unsigned long found_speed = 0; + + if (clk != &virt_prcm_set) + return -EINVAL; + + /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */ + if (cpu_is_omap2420()) + cpu_mask = RATE_IN_242X; + else if (cpu_is_omap2430()) + cpu_mask = RATE_IN_243X; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck.rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2_get_dpll_rate(&dpll_ck); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & 0x3) == 2) + done_rate = PRCM_FULL_SPEED; + else + done_rate = PRCM_HALF_SPEED; + + /* MPU divider */ + CM_CLKSEL_MPU = prcm->cm_clksel_mpu; + + /* dsp + iva1 div(2420), iva2.1(2430) */ + CM_CLKSEL_DSP = prcm->cm_clksel_dsp; + + CM_CLKSEL_GFX = prcm->cm_clksel_gfx; + + /* Major subsystem dividers */ + CM_CLKSEL1_CORE = prcm->cm_clksel1_core; + if (cpu_is_omap2430()) + CM_CLKSEL_MDM = prcm->cm_clksel_mdm; + + /* x2 to enter init_mem */ + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + + local_irq_restore(flags); + } + omap2_clksel_recalc(&dpll_ck); + + return 0; +} + +/*------------------------------------------------------------------------- + * Omap2 clock reset and init functions + *-------------------------------------------------------------------------*/ + +static struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_use = omap2_clk_use, + .clk_unuse = omap2_clk_unuse, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, +}; + +static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) +{ + u32 div, aplls, sclk = 13000000; + + aplls = CM_CLKSEL1_PLL; + aplls &= ((1 << 23) | (1 << 24) | (1 << 25)); + aplls >>= 23; /* Isolate field, 0,2,3 */ + + if (aplls == 0) + sclk = 19200000; + else if (aplls == 2) + sclk = 13000000; + else if (aplls == 3) + sclk = 12000000; + + div = PRCM_CLKSRC_CTRL; + div &= ((1 << 7) | (1 << 6)); + div >>= sys->rate_offset; + + osc->rate = sclk * div; + sys->rate = sclk; +} + +#ifdef CONFIG_OMAP_RESET_CLOCKS +static void __init omap2_disable_unused_clocks(void) +{ + struct clk *ck; + u32 regval32; + + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || + ck->enable_reg == 0) + continue; + + regval32 = __raw_readl(ck->enable_reg); + if ((regval32 & (1 << ck->enable_bit)) == 0) + continue; + + printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name); + omap2_clk_disable(ck); + } +} +late_initcall(omap2_disable_unused_clocks); +#endif + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + if (!mpurate) + return -EINVAL; + + if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + propagate_rate(&osc_ck); /* update main root fast */ + propagate_rate(&func_32k_ck); /* update main root slow */ + + printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + return 0; +} +arch_initcall(omap2_clk_arch_init); + +int __init omap2_clk_init(void) +{ + struct prcm_config *prcm; + struct clk ** clkp; + u32 clkrate; + + clk_init(&omap2_clk_functions); + omap2_get_crystal_rate(&osc_ck, &sys_ck); + + for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); + clkp++) { + + if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { + clk_register(*clkp); + continue; + } + + if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { + clk_register(*clkp); + continue; + } + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + propagate_rate(&osc_ck); /* update main root fast */ + propagate_rate(&func_32k_ck); /* update main root slow */ + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_use(&sync_32k_ick); + clk_use(&omapctrl_ick); + if (cpu_is_omap2430()) + clk_use(&sdrc_ick); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h new file mode 100644 index 00000000000..4aeab5591bd --- /dev/null +++ b/arch/arm/mach-omap2/clock.h @@ -0,0 +1,2103 @@ +/* + * linux/arch/arm/mach-omap24xx/clock.h + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * Created for OMAP2. + * + * Copyright (C) 2004 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_H + +static void omap2_sys_clk_recalc(struct clk * clk); +static void omap2_clksel_recalc(struct clk * clk); +static void omap2_followparent_recalc(struct clk * clk); +static void omap2_propagate_rate(struct clk * clk); +static void omap2_mpu_recalc(struct clk * clk); +static int omap2_select_table_rate(struct clk * clk, unsigned long rate); +static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); +static void omap2_clk_unuse(struct clk *clk); +static void omap2_sys_clk_recalc(struct clk * clk); +static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); +static u32 omap2_clksel_get_divisor(struct clk *clk); + + +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) + +/* Memory timings */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + +/* Mask for clksel which support parent settign in set_rate */ +#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \ + CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1) + +/* Mask for clksel regs which support rate operations */ +#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \ + CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \ + CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \ + CM_SYSCLKOUT_SEL1) + +/* + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + */ + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3 +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3 +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3 +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3 +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RII_CLKSEL_L4 | RII_CLKSEL_L3 +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ + RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ + RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #2 (ratio1) baseport-target + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5A_DPLL_MULT_13 (266 << 12) +#define M5A_DPLL_DIV_13 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5A_DPLL_MULT_19 (180 << 12) +#define M5A_DPLL_DIV_19 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* + * #4 (ratio2) + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M3_DPLL_MULT_13 (330 << 12) +#define M3_DPLL_DIV_13 (12 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M3_DPLL_MULT_19 (275 << 12) +#define M3_DPLL_DIV_19 (15 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_12 + +#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_13 + +#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_19 + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the oppisite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S165M 165000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S330M 330000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S660M 660000000 + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defiend the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +static struct prcm_config rate_table[] = { + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM #3 - ratio2 (ES2) - FAST */ + {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_110MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #3 - ratio2 (ES2) - SLOW */ + {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_110MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; + +/*------------------------------------------------------------------------- + * 24xx clock tree. + * + * NOTE:In many cases here we are assigning a 'default' parent. In many + * cases the parent is selectable. The get/set parent calls will also + * switch sources. + * + * Many some clocks say always_enabled, but they can be auto idled for + * power savings. They will always be available upon clock request. + * + * Several sources are given initial rates which may be wrong, this will + * be fixed up in the init func. + * + * Things are broadly separated below by clock domains. It is + * noteworthy that most periferals have dependencies on multiple clock + * domains. Many get their interface clocks from the L4 domain, but get + * functional clocks from fixed sources or other core domain derived + * clocks. + *-------------------------------------------------------------------------*/ + +/* Base external input clocks */ +static struct clk func_32k_ck = { + .name = "func_32k_ck", + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED, +}; + +/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ +static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ + .name = "osc_ck", + .rate = 26000000, /* fixed up in clock init */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, +}; + +/* With out modem likely 12MHz, with modem likely 13MHz */ +static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ + .name = "sys_ck", /* ~ ref_clk also */ + .parent = &osc_ck, + .rate = 13000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */ + .recalc = &omap2_sys_clk_recalc, +}; + +static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ + .name = "alt_ck", + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, +}; + +/* + * Analog domain root source clocks + */ + +/* dpll_ck, is broken out in to special cases through clksel */ +static struct clk dpll_ck = { + .name = "dpll_ck", + .parent = &sys_ck, /* Can be func_32k also */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk apll96_ck = { + .name = "apll96_ck", + .parent = &sys_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0x2, + .recalc = &omap2_propagate_rate, +}; + +static struct clk apll54_ck = { + .name = "apll54_ck", + .parent = &sys_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0x6, + .recalc = &omap2_propagate_rate, +}; + +/* + * PRCM digital base sources + */ +static struct clk func_54m_ck = { + .name = "func_54m_ck", + .parent = &apll54_ck, /* can also be alt_clk */ + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, + .src_offset = 5, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk core_ck = { + .name = "core_ck", + .parent = &dpll_ck, /* can also be 32k */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, +}; + +static struct clk sleep_ck = { /* sys_clk or 32k */ + .name = "sleep_ck", + .parent = &func_32k_ck, + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_96m_ck = { + .name = "func_96m_ck", + .parent = &apll96_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_48m_ck = { + .name = "func_48m_ck", + .parent = &apll96_ck, /* 96M or Alt */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, + .src_offset = 3, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_12m_ck = { + .name = "func_12m_ck", + .parent = &func_48m_ck, + .rate = 12000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, +}; + +/* Secure timer, only available in secure mode */ +static struct clk wdt1_osc_ck = { + .name = "ck_wdt1_osc", + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sys_clkout = { + .name = "sys_clkout", + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_SYSCLKOUT_SEL1 | RATE_CKCTL, + .src_offset = 0, + .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, + .enable_bit = 7, + .rate_offset = 3, + .recalc = &omap2_clksel_recalc, +}; + +/* In 2430, new in 2420 ES2 */ +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_SYSCLKOUT_SEL1 | RATE_CKCTL, + .src_offset = 8, + .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, + .enable_bit = 15, + .rate_offset = 11, + .recalc = &omap2_clksel_recalc, +}; + +/* + * MPU clock domain + * Clocks: + * MPU_FCLK, MPU_ICLK + * INT_M_FCLK, INT_M_I_CLK + * + * - Individual clocks are hardware managed. + * - Base divider comes from: CM_CLKSEL_MPU + * + */ +static struct clk mpu_ck = { /* Control cpu */ + .name = "mpu_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | + ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | + CONFIG_PARTICIPANT | RATE_PROPAGATES, + .rate_offset = 0, /* bits 0-4 */ + .recalc = &omap2_clksel_recalc, +}; + +/* + * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain + * Clocks: + * 2430: IVA2.1_FCLK, IVA2.1_ICLK + * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP + */ +static struct clk iva2_1_fck = { + .name = "iva2_1_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | RATE_PROPAGATES | + CONFIG_PARTICIPANT, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva2_1_ick = { + .name = "iva2_1_ick", + .parent = &iva2_1_fck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 5, + .recalc = &omap2_clksel_recalc, +}; + +/* + * Won't be too specific here. The core clock comes into this block + * it is divided then tee'ed. One branch goes directly to xyz enable + * controls. The other branch gets further divided by 2 then possibly + * routed into a synchronizer and out of clocks abc. + */ +static struct clk dsp_fck = { + .name = "dsp_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dsp_ick = { + .name = "dsp_ick", /* apparently ipi and isp */ + .parent = &dsp_fck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 5, + .enable_reg = (void __iomem *)&CM_ICLKEN_DSP, + .enable_bit = 1, /* for ipi */ + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva1_ifck = { + .name = "iva1_ifck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL | + CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, + .rate_offset= 8, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 10, + .recalc = &omap2_clksel_recalc, +}; + +/* IVA1 mpu/int/i/f clocks are /2 of parent */ +static struct clk iva1_mpu_int_ifck = { + .name = "iva1_mpu_int_ifck", + .parent = &iva1_ifck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 8, + .recalc = &omap2_clksel_recalc, +}; + +/* + * L3 clock domain + * L3 clocks are used for both interface and functional clocks to + * multiple entities. Some of these clocks are completely managed + * by hardware, and some others allow software control. Hardware + * managed ones general are based on directly CLK_REQ signals and + * various auto idle settings. The functional spec sets many of these + * as 'tie-high' for their enables. + * + * I-CLOCKS: + * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA + * CAM, HS-USB. + * F-CLOCK + * SSI. + * + * GPMC memories and SDRC have timing and clock sensitive registers which + * may very well need notification when the clock changes. Currently for low + * operating points, these are taken care of in sleep.S. + */ +static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ + .name = "core_l3_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT | + RATE_PROPAGATES, + .rate_offset = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk usb_l4_ick = { /* FS-USB interface clock */ + .name = "usb_l4_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP | + CONFIG_PARTICIPANT, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 0, + .rate_offset = 25, + .recalc = &omap2_clksel_recalc, +}; + +/* + * SSI is in L3 management domain, its direct parent is core not l3, + * many core power domain entities are grouped into the L3 clock + * domain. + * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK + * + * ssr = core/1/2/3/4/5, sst = 1/2 ssr. + */ +static struct clk ssi_ssr_sst_fck = { + .name = "ssi_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */ + .enable_bit = 1, + .rate_offset = 20, + .recalc = &omap2_clksel_recalc, +}; + +/* + * GFX clock domain + * Clocks: + * GFX_FCLK, GFX_ICLK + * GFX_CG1(2d), GFX_CG2(3d) + * + * GFX_FCLK runs from L3, and is divided by (1,2,3,4) + * The 2d and 3d clocks run at a hardware determined + * divided value of fclk. + * + */ +static struct clk gfx_3d_fck = { + .name = "gfx_3d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_GFX_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, + .enable_bit = 2, + .rate_offset= 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_2d_fck = { + .name = "gfx_2d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_GFX_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, + .enable_bit = 1, + .rate_offset= 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_ick = { + .name = "gfx_ick", /* From l3 */ + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +/* + * Modem clock domain (2430) + * CLOCKS: + * MDM_OSC_CLK + * MDM_ICLK + */ +static struct clk mdm_ick = { /* used both as a ick and fck */ + .name = "mdm_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_ICLKEN_MDM, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mdm_osc_ck = { + .name = "mdm_osc_ck", + .rate = 26000000, + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP243X | RATE_FIXED, + .enable_reg = (void __iomem *)&CM_FCLKEN_MDM, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +/* + * L4 clock management domain + * + * This domain contains lots of interface clocks from the L4 interface, some + * functional clocks. Fixed APLL functional source clocks are managed in + * this domain. + */ +static struct clk l4_ck = { /* used both as an ick and fck */ + .name = "l4_ck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | + DELAYED_APP | RATE_PROPAGATES, + .rate_offset = 5, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */ + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +/* + * DSS clock domain + * CLOCKs: + * DSS_L4_ICLK, DSS_L3_ICLK, + * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK + * + * DSS is both initiator and target. + */ +static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ + .name = "dss_ick", + .parent = &l4_ck, /* really both l3 and l4 */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk dss1_fck = { + .name = "dss1_fck", + .parent = &core_ck, /* Core or sys */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 0, + .rate_offset = 8, + .src_offset = 8, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dss2_fck = { /* Alt clk used in power management */ + .name = "dss2_fck", + .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 1, + .src_offset = 13, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk dss_54m_fck = { /* Alt clk used in power management */ + .name = "dss_54m_fck", /* 54m tv clk */ + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 2, + .recalc = &omap2_propagate_rate, +}; + +/* + * CORE power domain ICLK & FCLK defines. + * Many of the these can have more than one possible parent. Entries + * here will likely have an L4 interface parent, and may have multiple + * functional clock parents. + */ +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit4 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_WKUP_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 0, + .src_offset = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit4 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 4, + .src_offset = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */ + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 5, + .src_offset = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */ + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 6, + .src_offset = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */ + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 7, + .src_offset = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 8, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */ + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 8, + .src_offset = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */ + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 9, + .src_offset = 12, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */ + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 10, + .src_offset = 14, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 11, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 11, + .src_offset = 16, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 12, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 12, + .src_offset = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 13, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 13, + .src_offset = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */ + .enable_bit = 14, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 14, + .src_offset = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 15, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */ + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 15, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 16, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 16, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp3_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp4_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp5_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 21, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 21, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpios_ick = { + .name = "gpios_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpios_fck = { + .name = "gpios_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mpu_wdt_ick = { + .name = "mpu_wdt_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mpu_wdt_fck = { + .name = "mpu_wdt_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sync_32k_ick = { + .name = "sync_32k_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; +static struct clk icr_ick = { + .name = "icr_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk cam_ick = { + .name = "cam_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 31, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk cam_fck = { + .name = "cam_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 31, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 30, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt4_ick = { + .name = "wdt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 29, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt4_fck = { + .name = "wdt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 29, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 28, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 28, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 27, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 27, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmc_ick = { + .name = "mmc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 26, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmc_fck = { + .name = "mmc_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 26, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 25, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk fac_fck = { + .name = "fac_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 25, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk eac_ick = { + .name = "eac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 24, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk eac_fck = { + .name = "eac_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 24, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 23, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 23, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c2_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2chs2_fck = { + .name = "i2chs2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c1_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2chs1_fck = { + .name = "i2chs1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk vlynq_ick = { + .name = "vlynq_ick", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk vlynq_fck = { + .name = "vlynq_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 3, + .src_offset = 15, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN3_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk des_ick = { + .name = "des_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sha_ick = { + .name = "sha_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk aes_ick = { + .name = "aes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk usb_fck = { + .name = "usb_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk usbhs_ick = { + .name = "usbhs_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpio5_fck = { + .name = "gpio5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mdm_intc_ick = { + .name = "mdm_intc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 11, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchsdb1_fck = { + .name = "mmchsdb1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 16, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchsdb2_fck = { + .name = "mmchsdb2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +/* + * This clock is a composite clock which does entire set changes then + * forces a rebalance. It keys on the MPU speed, but it really could + * be any key speed part of a set in the rate table. + * + * to really change a set, you need memory table sets which get changed + * in sram, pre-notifiers & post notifiers, changing the top set, without + * having low level display recalc's won't work... this is why dpm notifiers + * work, isr's off, walk a list of clocks already _off_ and not messing with + * the bus. + * + * This clock should have no parent. It embodies the entire upper level + * active set. A parent will mess up some of the init also. + */ +static struct clk virt_prcm_set = { + .name = "virt_prcm_set", + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, + .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ + .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */ + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +static struct clk *onchip_clks[] = { + /* external root sources */ + &func_32k_ck, + &osc_ck, + &sys_ck, + &alt_ck, + /* internal analog sources */ + &dpll_ck, + &apll96_ck, + &apll54_ck, + /* internal prcm root sources */ + &func_54m_ck, + &core_ck, + &sleep_ck, + &func_96m_ck, + &func_48m_ck, + &func_12m_ck, + &wdt1_osc_ck, + &sys_clkout, + &sys_clkout2, + /* mpu domain clocks */ + &mpu_ck, + /* dsp domain clocks */ + &iva2_1_fck, /* 2430 */ + &iva2_1_ick, + &dsp_ick, /* 2420 */ + &dsp_fck, + &iva1_ifck, + &iva1_mpu_int_ifck, + /* GFX domain clocks */ + &gfx_3d_fck, + &gfx_2d_fck, + &gfx_ick, + /* Modem domain clocks */ + &mdm_ick, + &mdm_osc_ck, + /* DSS domain clocks */ + &dss_ick, + &dss1_fck, + &dss2_fck, + &dss_54m_fck, + /* L3 domain clocks */ + &core_l3_ck, + &ssi_ssr_sst_fck, + &usb_l4_ick, + /* L4 domain clocks */ + &l4_ck, /* used as both core_l4 and wu_l4 */ + &ssi_l4_ick, + /* virtual meta-group clock */ + &virt_prcm_set, + /* general l4 interface ck, multi-parent functional clk */ + &gpt1_ick, + &gpt1_fck, + &gpt2_ick, + &gpt2_fck, + &gpt3_ick, + &gpt3_fck, + &gpt4_ick, + &gpt4_fck, + &gpt5_ick, + &gpt5_fck, + &gpt6_ick, + &gpt6_fck, + &gpt7_ick, + &gpt7_fck, + &gpt8_ick, + &gpt8_fck, + &gpt9_ick, + &gpt9_fck, + &gpt10_ick, + &gpt10_fck, + &gpt11_ick, + &gpt11_fck, + &gpt12_ick, + &gpt12_fck, + &mcbsp1_ick, + &mcbsp1_fck, + &mcbsp2_ick, + &mcbsp2_fck, + &mcbsp3_ick, + &mcbsp3_fck, + &mcbsp4_ick, + &mcbsp4_fck, + &mcbsp5_ick, + &mcbsp5_fck, + &mcspi1_ick, + &mcspi1_fck, + &mcspi2_ick, + &mcspi2_fck, + &mcspi3_ick, + &mcspi3_fck, + &uart1_ick, + &uart1_fck, + &uart2_ick, + &uart2_fck, + &uart3_ick, + &uart3_fck, + &gpios_ick, + &gpios_fck, + &mpu_wdt_ick, + &mpu_wdt_fck, + &sync_32k_ick, + &wdt1_ick, + &omapctrl_ick, + &icr_ick, + &cam_fck, + &cam_ick, + &mailboxes_ick, + &wdt4_ick, + &wdt4_fck, + &wdt3_ick, + &wdt3_fck, + &mspro_ick, + &mspro_fck, + &mmc_ick, + &mmc_fck, + &fac_ick, + &fac_fck, + &eac_ick, + &eac_fck, + &hdq_ick, + &hdq_fck, + &i2c1_ick, + &i2c1_fck, + &i2chs1_fck, + &i2c2_ick, + &i2c2_fck, + &i2chs2_fck, + &vlynq_ick, + &vlynq_fck, + &sdrc_ick, + &des_ick, + &sha_ick, + &rng_ick, + &aes_ick, + &pka_ick, + &usb_fck, + &usbhs_ick, + &mmchs1_ick, + &mmchs1_fck, + &mmchs2_ick, + &mmchs2_fck, + &gpio5_ick, + &gpio5_fck, + &mdm_intc_ick, + &mmchsdb1_fck, + &mmchsdb2_fck, +}; + +#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c new file mode 100644 index 00000000000..7181edb8935 --- /dev/null +++ b/arch/arm/mach-omap2/devices.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-omap2/devices.c + * + * OMAP2 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + +extern void omap_nop_release(struct device *dev); + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP2_I2C_BASE2 0x48072000 +#define OMAP2_I2C_INT2 57 + +static struct resource i2c_resources2[] = { + { + .start = OMAP2_I2C_BASE2, + .end = OMAP2_I2C_BASE2 + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP2_I2C_INT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_i2c_device2 = { + .name = "i2c_omap", + .id = 2, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources2), + .resource = i2c_resources2, +}; + +/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ +static void omap_init_i2c(void) +{ + /* REVISIT: Second I2C not in use on H4? */ + if (machine_is_omap_h4()) + return; + + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + (void) platform_device_register(&omap_i2c_device2); +} + +#else + +static void omap_init_i2c(void) {} + +#endif + +/*-------------------------------------------------------------------------*/ + +static int __init omap2_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + + return 0; +} +arch_initcall(omap2_init_devices); + diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c new file mode 100644 index 00000000000..76187300f2b --- /dev/null +++ b/arch/arm/mach-omap2/id.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-omap2/id.c + * + * OMAP2 CPU identification code + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define OMAP24XX_TAP_BASE io_p2v(0x48014000) + +#define OMAP_TAP_IDCODE 0x0204 +#define OMAP_TAP_PROD_ID 0x0208 + +#define OMAP_TAP_DIE_ID_0 0x0218 +#define OMAP_TAP_DIE_ID_1 0x021C +#define OMAP_TAP_DIE_ID_2 0x0220 +#define OMAP_TAP_DIE_ID_3 0x0224 + +/* system_rev fields for OMAP2 processors: + * CPU id bits [31:16], + * CPU device type [15:12], (unprg,normal,POP) + * CPU revision [11:08] + * CPU class bits [07:00] + */ + +struct omap_id { + u16 hawkeye; /* Silicon type (Hawkeye id) */ + u8 dev; /* Device type from production_id reg */ + u32 type; /* combined type id copied to system_rev */ +}; + +/* Register values to detect the OMAP version */ +static struct omap_id omap_ids[] __initdata = { + { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 }, + { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 }, + { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 }, + { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 }, + { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 }, + { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 }, +}; + +static u32 __init read_tap_reg(int reg) +{ + return __raw_readl(OMAP24XX_TAP_BASE + reg); +} + +void __init omap2_check_revision(void) +{ + int i, j; + u32 idcode; + u32 prod_id; + u16 hawkeye; + u8 dev_type; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + prod_id = read_tap_reg(OMAP_TAP_PROD_ID); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0x0f; + dev_type = (prod_id >> 16) & 0x0f; + +#ifdef DEBUG + printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n", + idcode, rev, hawkeye, (idcode >> 1) & 0x7ff); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_0)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n", + read_tap_reg(OMAP_TAP_DIE_ID_1), + (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_2)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_3)); + printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", + prod_id, dev_type); +#endif + + /* Check hawkeye ids */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (hawkeye == omap_ids[i].hawkeye) + break; + } + + if (i == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP CPU id\n"); + return; + } + + for (j = i; j < ARRAY_SIZE(omap_ids); j++) { + if (dev_type == omap_ids[j].dev) + break; + } + + if (j == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP device type. " + "Handling it as OMAP%04x\n", + omap_ids[i].type >> 16); + j = i; + } + system_rev = omap_ids[j].type; + + system_rev |= rev << 8; + + /* Add the cpu class info (24xx) */ + system_rev |= 0x24; + + pr_info("OMAP%04x", system_rev >> 16); + if ((system_rev >> 8) & 0x0f) + printk("%x", (system_rev >> 8) & 0x0f); + printk("\n"); +} + diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c new file mode 100644 index 00000000000..8ea67bf196a --- /dev/null +++ b/arch/arm/mach-omap2/io.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/mach-omap2/io.c + * + * OMAP2 I/O mapping code + * + * Copyright (C) 2005 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/arch/mux.h> + +extern void omap_sram_init(void); +extern int omap2_clk_init(void); +extern void omap2_check_revision(void); + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc omap2_io_desc[] __initdata = { + { + .virtual = L3_24XX_VIRT, + .pfn = __phys_to_pfn(L3_24XX_PHYS), + .length = L3_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + } +}; + +void __init omap_map_common_io(void) +{ + iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); + omap2_check_revision(); + omap_sram_init(); + omap2_mux_init(); + omap2_clk_init(); +} diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c new file mode 100644 index 00000000000..d7baff675cf --- /dev/null +++ b/arch/arm/mach-omap2/irq.c @@ -0,0 +1,149 @@ +/* + * linux/arch/arm/mach-omap/omap2/irq.c + * + * Interrupt handler for OMAP2 boards. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/interrupt.h> +#include <asm/hardware.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/io.h> + +#define INTC_REVISION 0x0000 +#define INTC_SYSCONFIG 0x0010 +#define INTC_SYSSTATUS 0x0014 +#define INTC_CONTROL 0x0048 +#define INTC_MIR_CLEAR0 0x0088 +#define INTC_MIR_SET0 0x008c + +/* + * OMAP2 has a number of different interrupt controllers, each interrupt + * controller is identified as its own "bank". Register definitions are + * fairly consistent for each bank, but not all registers are implemented + * for each bank.. when in doubt, consult the TRM. + */ +static struct omap_irq_bank { + unsigned long base_reg; + unsigned int nr_irqs; +} __attribute__ ((aligned(4))) irq_banks[] = { + { + /* MPU INTC */ + .base_reg = OMAP24XX_IC_BASE, + .nr_irqs = 96, + }, { + /* XXX: DSP INTC */ + +#if 0 + /* + * Commented out for now until we fix the IVA clocking + */ +#ifdef CONFIG_ARCH_OMAP2420 + }, { + /* IVA INTC (2420 only) */ + .base_reg = OMAP24XX_IVA_INTC_BASE, + .nr_irqs = 16, /* Actually 32, but only 16 are used */ +#endif +#endif + } +}; + +/* XXX: FIQ and additional INTC support (only MPU at the moment) */ +static void omap_ack_irq(unsigned int irq) +{ + omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); +} + +static void omap_mask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); +} + +static void omap_unmask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); +} + +static void omap_mask_ack_irq(unsigned int irq) +{ + omap_mask_irq(irq); + omap_ack_irq(irq); +} + +static struct irqchip omap_irq_chip = { + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, +}; + +static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) +{ + unsigned long tmp; + + tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff; + printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " + "(revision %ld.%ld) with %d interrupts\n", + bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); + + tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG); + tmp |= 1 << 1; /* soft reset */ + omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + + while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + /* Wait for reset to complete */; +} + +void __init omap_init_irq(void) +{ + unsigned long nr_irqs = 0; + unsigned int nr_banks = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + + /* XXX */ + if (!bank->base_reg) + continue; + + omap_irq_bank_init_one(bank); + + nr_irqs += bank->nr_irqs; + nr_banks++; + } + + printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", + nr_irqs, nr_banks, nr_banks > 1 ? "s" : ""); + + for (i = 0; i < nr_irqs; i++) { + set_irq_chip(i, &omap_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID); + } +} + diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c new file mode 100644 index 00000000000..ea4654815dd --- /dev/null +++ b/arch/arm/mach-omap2/mux.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-omap2/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +#include <asm/arch/mux.h> + +#ifdef CONFIG_OMAP_MUX + +/* NOTE: See mux.h for the enumeration */ + +struct pin_config __initdata_or_module omap24xx_pins[] = { +/* + * description mux mux pull pull debug + * offset mode ena type + */ + +/* 24xx I2C */ +MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1) +MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1) +MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1) +MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) + +/* Menelaus interrupt */ +MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) + +/* 24xx GPIO */ +MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) +MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) + +}; + +int __init omap2_mux_init(void) +{ + omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins)); + return 0; +} + +#endif diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h new file mode 100644 index 00000000000..2eb89b936c8 --- /dev/null +++ b/arch/arm/mach-omap2/prcm.h @@ -0,0 +1,419 @@ +/* + * prcm.h - Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DPM_PRCM_H +#define __ASM_ARM_ARCH_DPM_PRCM_H + +/* SET_PERFORMANCE_LEVEL PARAMETERS */ +#define PRCM_HALF_SPEED 1 +#define PRCM_FULL_SPEED 2 + +#ifndef __ASSEMBLER__ + +#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset)) + +#define PRCM_REVISION PRCM_REG32(0x000) +#define PRCM_SYSCONFIG PRCM_REG32(0x010) +#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018) +#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C) +#define PRCM_VOLTCTRL PRCM_REG32(0x050) +#define PRCM_VOLTST PRCM_REG32(0x054) +#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060) +#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070) +#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078) +#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080) +#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084) +#define PRCM_VOLTSETUP PRCM_REG32(0x090) +#define PRCM_CLKSSETUP PRCM_REG32(0x094) +#define PRCM_POLCTRL PRCM_REG32(0x098) + +/* GENERAL PURPOSE */ +#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0) +#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4) +#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8) +#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC) +#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0) +#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4) +#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8) +#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC) +#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0) +#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4) +#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8) +#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC) +#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0) +#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4) +#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8) +#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC) +#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0) +#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4) +#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8) +#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC) + +/* MPU */ +#define CM_CLKSEL_MPU PRCM_REG32(0x140) +#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148) +#define RM_RSTST_MPU PRCM_REG32(0x158) +#define PM_WKDEP_MPU PRCM_REG32(0x1C8) +#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4) +#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8) +#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC) +#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0) +#define PM_PWSTST_MPU PRCM_REG32(0x1E4) + +/* CORE */ +#define CM_FCLKEN1_CORE PRCM_REG32(0x200) +#define CM_FCLKEN2_CORE PRCM_REG32(0x204) +#define CM_FCLKEN3_CORE PRCM_REG32(0x208) +#define CM_ICLKEN1_CORE PRCM_REG32(0x210) +#define CM_ICLKEN2_CORE PRCM_REG32(0x214) +#define CM_ICLKEN3_CORE PRCM_REG32(0x218) +#define CM_ICLKEN4_CORE PRCM_REG32(0x21C) +#define CM_IDLEST1_CORE PRCM_REG32(0x220) +#define CM_IDLEST2_CORE PRCM_REG32(0x224) +#define CM_IDLEST3_CORE PRCM_REG32(0x228) +#define CM_IDLEST4_CORE PRCM_REG32(0x22C) +#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230) +#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234) +#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238) +#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C) +#define CM_CLKSEL1_CORE PRCM_REG32(0x240) +#define CM_CLKSEL2_CORE PRCM_REG32(0x244) +#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248) +#define PM_WKEN1_CORE PRCM_REG32(0x2A0) +#define PM_WKEN2_CORE PRCM_REG32(0x2A4) +#define PM_WKST1_CORE PRCM_REG32(0x2B0) +#define PM_WKST2_CORE PRCM_REG32(0x2B4) +#define PM_WKDEP_CORE PRCM_REG32(0x2C8) +#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0) +#define PM_PWSTST_CORE PRCM_REG32(0x2E4) + +/* GFX */ +#define CM_FCLKEN_GFX PRCM_REG32(0x300) +#define CM_ICLKEN_GFX PRCM_REG32(0x310) +#define CM_IDLEST_GFX PRCM_REG32(0x320) +#define CM_CLKSEL_GFX PRCM_REG32(0x340) +#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348) +#define RM_RSTCTRL_GFX PRCM_REG32(0x350) +#define RM_RSTST_GFX PRCM_REG32(0x358) +#define PM_WKDEP_GFX PRCM_REG32(0x3C8) +#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0) +#define PM_PWSTST_GFX PRCM_REG32(0x3E4) + +/* WAKE-UP */ +#define CM_FCLKEN_WKUP PRCM_REG32(0x400) +#define CM_ICLKEN_WKUP PRCM_REG32(0x410) +#define CM_IDLEST_WKUP PRCM_REG32(0x420) +#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430) +#define CM_CLKSEL_WKUP PRCM_REG32(0x440) +#define RM_RSTCTRL_WKUP PRCM_REG32(0x450) +#define RM_RSTTIME_WKUP PRCM_REG32(0x454) +#define RM_RSTST_WKUP PRCM_REG32(0x458) +#define PM_WKEN_WKUP PRCM_REG32(0x4A0) +#define PM_WKST_WKUP PRCM_REG32(0x4B0) + +/* CLOCKS */ +#define CM_CLKEN_PLL PRCM_REG32(0x500) +#define CM_IDLEST_CKGEN PRCM_REG32(0x520) +#define CM_AUTOIDLE_PLL PRCM_REG32(0x530) +#define CM_CLKSEL1_PLL PRCM_REG32(0x540) +#define CM_CLKSEL2_PLL PRCM_REG32(0x544) + +/* DSP */ +#define CM_FCLKEN_DSP PRCM_REG32(0x800) +#define CM_ICLKEN_DSP PRCM_REG32(0x810) +#define CM_IDLEST_DSP PRCM_REG32(0x820) +#define CM_AUTOIDLE_DSP PRCM_REG32(0x830) +#define CM_CLKSEL_DSP PRCM_REG32(0x840) +#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848) +#define RM_RSTCTRL_DSP PRCM_REG32(0x850) +#define RM_RSTST_DSP PRCM_REG32(0x858) +#define PM_WKEN_DSP PRCM_REG32(0x8A0) +#define PM_WKDEP_DSP PRCM_REG32(0x8C8) +#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0) +#define PM_PWSTST_DSP PRCM_REG32(0x8E4) +#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0) +#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4) + +/* IVA */ +#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8) +#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC) + +/* Modem on 2430 */ +#define CM_FCLKEN_MDM PRCM_REG32(0xC00) +#define CM_ICLKEN_MDM PRCM_REG32(0xC10) +#define CM_IDLEST_MDM PRCM_REG32(0xC20) +#define CM_CLKSEL_MDM PRCM_REG32(0xC40) + +/* FIXME: Move to header for 2430 */ +#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000) +#define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) + +#define GPMC_BASE (OMAP24XX_GPMC_BASE) +#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset)) + +#define GPT1_BASE (OMAP24XX_GPT1) +#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) + +/* Misc sysconfig */ +#define DISPC_SYSCONFIG DISP_REG32(0x410) +#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000) +#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) +#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10) + +//#define DSP_MMU_SYSCONFIG 0x5A000010 +#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10) +//#define IVA_MMU_SYSCONFIG 0x5D000010 +//#define DSP_DMA_SYSCONFIG 0x00FCC02C +#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C) +#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C) +#define GPMC_SYSCONFIG GPMC_REG32(0x010) +#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010) +#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054) +#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054) +#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054) +//#define IVA_SYSCONFIG 0x5C060010 +#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10) +#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10) +#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010) +//#define VLYNQ_SYSCONFIG 0x67FFFE10 + +/* rkw - good cannidates for PM_ to start what nm was trying */ +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + +#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) +#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) +#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) +#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10) +#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10) +#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10) +#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10) +#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10) +#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10) +#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10) +#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) +#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) + +#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1))) + +#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10)) +#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10)) +#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10)) +#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10)) + +/* GP TIMER 1 */ +#define GPTIMER1_TISTAT GPT1_REG32(0x014) +#define GPTIMER1_TISR GPT1_REG32(0x018) +#define GPTIMER1_TIER GPT1_REG32(0x01C) +#define GPTIMER1_TWER GPT1_REG32(0x020) +#define GPTIMER1_TCLR GPT1_REG32(0x024) +#define GPTIMER1_TCRR GPT1_REG32(0x028) +#define GPTIMER1_TLDR GPT1_REG32(0x02C) +#define GPTIMER1_TTGR GPT1_REG32(0x030) +#define GPTIMER1_TWPS GPT1_REG32(0x034) +#define GPTIMER1_TMAR GPT1_REG32(0x038) +#define GPTIMER1_TCAR1 GPT1_REG32(0x03C) +#define GPTIMER1_TSICR GPT1_REG32(0x040) +#define GPTIMER1_TCAR2 GPT1_REG32(0x044) + +/* rkw -- base fix up please... */ +#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018) + +/* SDRC */ +#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060) +#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064) +#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068) +#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C) +#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070) +#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084) + +/* GPIO 1 */ +#define GPIO1_BASE GPIOX_BASE(1) +#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset)) +#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C) +#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018) +#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C) +#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028) +#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020) +#define GPIO1_RISINGDETECT GPIO1_REG32(0x048) +#define GPIO1_DATAIN GPIO1_REG32(0x038) +#define GPIO1_OE GPIO1_REG32(0x034) +#define GPIO1_DATAOUT GPIO1_REG32(0x03C) + +/* GPIO2 */ +#define GPIO2_BASE GPIOX_BASE(2) +#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset)) +#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C) +#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018) +#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C) +#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028) +#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020) +#define GPIO2_RISINGDETECT GPIO2_REG32(0x048) +#define GPIO2_DATAIN GPIO2_REG32(0x038) +#define GPIO2_OE GPIO2_REG32(0x034) +#define GPIO2_DATAOUT GPIO2_REG32(0x03C) + +/* GPIO 3 */ +#define GPIO3_BASE GPIOX_BASE(3) +#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset)) +#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C) +#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018) +#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C) +#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028) +#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020) +#define GPIO3_RISINGDETECT GPIO3_REG32(0x048) +#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C) +#define GPIO3_DATAIN GPIO3_REG32(0x038) +#define GPIO3_OE GPIO3_REG32(0x034) +#define GPIO3_DATAOUT GPIO3_REG32(0x03C) +#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) +#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) + +/* GPIO 4 */ +#define GPIO4_BASE GPIOX_BASE(4) +#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset)) +#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C) +#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018) +#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C) +#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028) +#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020) +#define GPIO4_RISINGDETECT GPIO4_REG32(0x048) +#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C) +#define GPIO4_DATAIN GPIO4_REG32(0x038) +#define GPIO4_OE GPIO4_REG32(0x034) +#define GPIO4_DATAOUT GPIO4_REG32(0x03C) +#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) +#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) + + +/* IO CONFIG */ +#define CONTROL_BASE (OMAP24XX_CTRL_BASE) +#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset)) + +#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) +#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) +#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8) +#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) +#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) +#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) +#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) +#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) +#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) + +/* CONTROL */ +#define CONTROL_DEVCONF CONTROL_REG32(0x274) + +/* INTERRUPT CONTROLLER */ +#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000) +#define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) + +#define INTC1_U_BASE INTC_REG32(0x000) +#define INTC_MIR0 INTC_REG32(0x084) +#define INTC_MIR_SET0 INTC_REG32(0x08C) +#define INTC_MIR_CLEAR0 INTC_REG32(0x088) +#define INTC_ISR_CLEAR0 INTC_REG32(0x094) +#define INTC_MIR1 INTC_REG32(0x0A4) +#define INTC_MIR_SET1 INTC_REG32(0x0AC) +#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8) +#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4) +#define INTC_MIR2 INTC_REG32(0x0C4) +#define INTC_MIR_SET2 INTC_REG32(0x0CC) +#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8) +#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) +#define INTC_SIR_IRQ INTC_REG32(0x040) +#define INTC_CONTROL INTC_REG32(0x048) +#define INTC_ILR11 INTC_REG32(0x12C) +#define INTC_ILR32 INTC_REG32(0x180) +#define INTC_ILR37 INTC_REG32(0x194) +#define INTC_SYSCONFIG INTC_REG32(0x010) + +/* RAM FIREWALL */ +#define RAMFW_BASE (0x68005000) +#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset)) + +#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048) +#define RAMFW_READPERM0 RAMFW_REG32(0x050) +#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058) + +/* GPMC CS1 FPGA ON USER INTERFACE MODULE */ +//#define DEBUG_BOARD_LED_REGISTER 0x04000014 + +/* GPMC CS0 */ +#define GPMC_CONFIG1_0 GPMC_REG32(0x060) +#define GPMC_CONFIG2_0 GPMC_REG32(0x064) +#define GPMC_CONFIG3_0 GPMC_REG32(0x068) +#define GPMC_CONFIG4_0 GPMC_REG32(0x06C) +#define GPMC_CONFIG5_0 GPMC_REG32(0x070) +#define GPMC_CONFIG6_0 GPMC_REG32(0x074) +#define GPMC_CONFIG7_0 GPMC_REG32(0x078) + +/* DSS */ +#define DSS_CONTROL DISP_REG32(0x040) +#define DISPC_CONTROL DISP_REG32(0x440) +#define DISPC_SYSSTATUS DISP_REG32(0x414) +#define DISPC_IRQSTATUS DISP_REG32(0x418) +#define DISPC_IRQENABLE DISP_REG32(0x41C) +#define DISPC_CONFIG DISP_REG32(0x444) +#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C) +#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450) +#define DISPC_TRANS_COLOR0 DISP_REG32(0x454) +#define DISPC_TRANS_COLOR1 DISP_REG32(0x458) +#define DISPC_LINE_NUMBER DISP_REG32(0x460) +#define DISPC_TIMING_H DISP_REG32(0x464) +#define DISPC_TIMING_V DISP_REG32(0x468) +#define DISPC_POL_FREQ DISP_REG32(0x46C) +#define DISPC_DIVISOR DISP_REG32(0x470) +#define DISPC_SIZE_DIG DISP_REG32(0x478) +#define DISPC_SIZE_LCD DISP_REG32(0x47C) +#define DISPC_GFX_BA0 DISP_REG32(0x480) +#define DISPC_GFX_BA1 DISP_REG32(0x484) +#define DISPC_GFX_POSITION DISP_REG32(0x488) +#define DISPC_GFX_SIZE DISP_REG32(0x48C) +#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0) +#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4) +#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC) +#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0) +#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4) +#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8) +#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4) +#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) +#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) + +/* Wake up define for board */ +#define GPIO97 (1 << 1) +#define GPIO88 (1 << 24) + +#endif /* __ASSEMBLER__ */ + +#endif + + + + + diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c new file mode 100644 index 00000000000..f4df04fe1dd --- /dev/null +++ b/arch/arm/mach-omap2/serial.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-omap/omap2/serial.c + * + * OMAP2 serial support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Based off of arch/arm/mach-omap/omap1/serial.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/common.h> +#include <asm/arch/board.h> + +static struct clk * uart1_ick = NULL; +static struct clk * uart1_fck = NULL; +static struct clk * uart2_ick = NULL; +static struct clk * uart2_fck = NULL; +static struct clk * uart3_ick = NULL; +static struct clk * uart3_fck = NULL; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = (unsigned long)OMAP_UART1_BASE, + .irq = 72, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = (unsigned long)OMAP_UART2_BASE, + .irq = 73, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = (unsigned long)OMAP_UART3_BASE, + .irq = 74, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .flags = 0 + } +}; + +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) +{ + offset <<= p->regshift; + __raw_writeb(value, (unsigned long)(p->membase + offset)); +} + +/* + * Internal UARTs need to be initialized for the 8250 autoconfig to work + * properly. Note that the TX watermark initialization may not be needed + * once the 8250.c watermark handling code is merged. + */ +static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +{ + serial_write_reg(p, UART_OMAP_MDR1, 0x07); + serial_write_reg(p, UART_OMAP_SCR, 0x08); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); + serial_write_reg(p, UART_OMAP_SYSC, 0x01); +} + +void __init omap_serial_init() +{ + int i; + const struct omap_uart_config *info; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + + info = omap_get_config(OMAP_TAG_UART, + struct omap_uart_config); + + if (info == NULL) + return; + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->membase = 0; + p->mapbase = 0; + continue; + } + + switch (i) { + case 0: + uart1_ick = clk_get(NULL, "uart1_ick"); + if (IS_ERR(uart1_ick)) + printk("Could not get uart1_ick\n"); + else { + clk_use(uart1_ick); + } + + uart1_fck = clk_get(NULL, "uart1_fck"); + if (IS_ERR(uart1_fck)) + printk("Could not get uart1_fck\n"); + else { + clk_use(uart1_fck); + } + break; + case 1: + uart2_ick = clk_get(NULL, "uart2_ick"); + if (IS_ERR(uart2_ick)) + printk("Could not get uart2_ick\n"); + else { + clk_use(uart2_ick); + } + + uart2_fck = clk_get(NULL, "uart2_fck"); + if (IS_ERR(uart2_fck)) + printk("Could not get uart2_fck\n"); + else { + clk_use(uart2_fck); + } + break; + case 2: + uart3_ick = clk_get(NULL, "uart3_ick"); + if (IS_ERR(uart3_ick)) + printk("Could not get uart3_ick\n"); + else { + clk_use(uart3_ick); + } + + uart3_fck = clk_get(NULL, "uart3_fck"); + if (IS_ERR(uart3_fck)) + printk("Could not get uart3_fck\n"); + else { + clk_use(uart3_fck); + } + break; + } + + omap_serial_reset(p); + } +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init omap_init(void) +{ + return platform_device_register(&serial_device); +} +arch_initcall(omap_init); diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S new file mode 100644 index 00000000000..2a869e20334 --- /dev/null +++ b/arch/arm/mach-omap2/sram-fn.S @@ -0,0 +1,333 @@ +/* + * linux/arch/arm/mach-omap1/sram.S + * + * Omap2 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/hardware.h> + +#include <asm/arch/prcm.h> + +#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) + +#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544) +#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050) +#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080) +#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500) +#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520) +#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540) + +#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060) +#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4) + + .text + +ENTRY(sram_ddr_init) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r12, r2 @ capture CS1 vs CS0 + mov r8, r3 @ capture force parameter + + /* frequency shift down */ + ldr r2, cm_clksel2_pll @ get address of dpllout reg + mov r3, #0x1 @ value for 1x operation + str r3, [r2] @ go to L1-freq operation + + /* voltage shift down */ + mov r9, #0x1 @ set up for L1 voltage call + bl voltage_shift @ go drop voltage + + /* dll lock mode */ + ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl + ldr r10, [r11] @ get current val + cmp r12, #0x1 @ cs1 base (2422 es2.05/1) + addeq r11, r11, #0x8 @ if cs1 base, move to DLLB + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode. + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + str r10, [r11] @ commit to DLLA_CTRL + bl i_dll_wait @ wait for dll to lock + + /* get dll value */ + add r11, r11, #0x4 @ get addr of status reg + ldr r10, [r11] @ get locked value + + /* voltage shift up */ + mov r9, #0x0 @ shift back to L0-voltage + bl voltage_shift @ go raise voltage + + /* frequency shift up */ + mov r3, #0x2 @ value for 2x operation + str r3, [r2] @ go to L0-freq operation + + /* reset entry mode for dllctrl */ + sub r11, r11, #0x4 @ move from status to ctrl + cmp r12, #0x1 @ normalize if cs1 based + subeq r11, r11, #0x8 @ possibly back to DLLA + cmp r8, #0x1 @ if forced unlock exit + orreq r1, r1, #0x4 @ make sure exit with unlocked value + str r1, [r11] @ restore DLLA_CTRL high value + add r11, r11, #0x8 @ move to DLLB_CTRL addr + str r1, [r11] @ set value DLLB_CTRL + bl i_dll_wait @ wait for possible lock + + /* set up for return, DDR should be good */ + str r10, [r0] @ write dll_status and return counter + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + + /* ensure the DLL has relocked */ +i_dll_wait: + mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + mov pc, lr + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift: + ldr r4, prcm_voltctrl @ get addr of volt ctrl. + ldr r5, [r4] @ get value. + ldr r6, prcm_mask_val @ get value of mask + and r5, r5, r6 @ apply mask to clear bits + orr r5, r5, r9 @ bulld value for L0/L1-volt operation. + str r5, [r4] @ set up for change. + mov r3, #0x4000 @ get val for force + orr r5, r5, r3 @ build value for force + str r5, [r4] @ Force transition to L1 + + ldr r3, timer_32ksynct_cr @ get addr of counter + ldr r5, [r3] @ get value + add r5, r5, #0x3 @ give it at most 93uS +volt_delay: + ldr r7, [r3] @ get timer value + cmp r5, r7 @ time up? + bhi volt_delay @ not yet->branch + mov pc, lr @ back to caller. + +/* relative load constants */ +cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +prcm_voltctrl: + .word PRCM_VOLTCTRL_V +prcm_mask_val: + .word 0xFFFF3FFC +timer_32ksynct_cr: + .word TIMER_32KSYNCT_CR_V +ENTRY(sram_ddr_init_sz) + .word . - sram_ddr_init + +/* + * Reprograms memory timings. + * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] + * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 + */ +ENTRY(sram_reprogram_sdrc) + stmfd sp!, {r0 - r10, lr} @ save registers on stack + mov r3, #0x0 @ clear for mrc call + mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR + nop + nop + ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg + ldr r5, [r6] @ get value + mov r5, r5, lsr #8 @ isolate rfr field and drop burst + + cmp r0, #0x1 @ going to half speed? + movne r9, #0x0 @ if up set flag up for pre up, hi volt + + blne voltage_shift_c @ adjust voltage + + cmp r0, #0x1 @ going to half speed (post branch link) + moveq r5, r5, lsr #1 @ divide by 2 if to half + movne r5, r5, lsl #1 @ mult by 2 if to full + mov r5, r5, lsl #8 @ put rfr field back into place + add r5, r5, #0x1 @ turn on burst of 1 + ldr r4, ddr_cm_clksel2_pll @ get address of out reg + ldr r3, [r4] @ get curr value + orr r3, r3, #0x3 + bic r3, r3, #0x3 @ clear lower bits + orr r3, r3, r0 @ new state value + str r3, [r4] @ set new state (pll/x, x=1 or 2) + nop + nop + + moveq r9, #0x1 @ if speed down, post down, drop volt + bleq voltage_shift_c + + mcr p15, 0, r3, c7, c10, 4 @ memory barrier + str r5, [r6] @ set new RFR_1 value + add r6, r6, #0x30 @ get RFR_2 addr + str r5, [r6] @ set RFR_2 + nop + cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL + bne freq_out @ leave if SDR, no DLL function + + /* With DDR, we need to take care of the DLL for the frequency change */ + ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl + str r1, [r2] @ write out new SDRC_DLLA_CTRL + add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL + str r1, [r2] @ commit to SDRC_DLLB_CTRL + mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks +dll_wait: + subs r1, r1, #0x1 + bne dll_wait +freq_out: + ldmfd sp!, {r0 - r10, pc} @ restore regs and return + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift_c: + ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl + ldr r8, [r10] @ get value + ldr r7, ddr_prcm_mask_val @ get value of mask + and r8, r8, r7 @ apply mask to clear bits + orr r8, r8, r9 @ bulld value for L0/L1-volt operation. + str r8, [r10] @ set up for change. + mov r7, #0x4000 @ get val for force + orr r8, r8, r7 @ build value for force + str r8, [r10] @ Force transition to L1 + + ldr r10, ddr_timer_32ksynct @ get addr of counter + ldr r8, [r10] @ get value + add r8, r8, #0x2 @ give it at most 62uS (min 31+) +volt_delay_c: + ldr r7, [r10] @ get timer value + cmp r8, r7 @ time up? + bhi volt_delay_c @ not yet->branch + mov pc, lr @ back to caller + +ddr_cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +ddr_sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +ddr_sdrc_rfr_ctrl: + .word SDRC_RFR_CTRL_V +ddr_prcm_voltctrl: + .word PRCM_VOLTCTRL_V +ddr_prcm_mask_val: + .word 0xFFFF3FFC +ddr_timer_32ksynct: + .word TIMER_32KSYNCT_CR_V + +ENTRY(sram_reprogram_sdrc_sz) + .word . - sram_reprogram_sdrc + +/* + * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. + */ +ENTRY(sram_set_prcm) + stmfd sp!, {r0-r12, lr} @ regs to stack + adr r4, pbegin @ addr of preload start + adr r8, pend @ addr of preload end + mcrr p15, 1, r8, r4, c12 @ preload into icache +pbegin: + /* move into fast relock bypass */ + ldr r8, pll_ctl @ get addr + ldr r5, [r8] @ get val + mvn r6, #0x3 @ clear mask + and r5, r5, r6 @ clear field + orr r7, r5, #0x2 @ fast relock val + str r7, [r8] @ go to fast relock + ldr r4, pll_stat @ addr of stat +block: + /* wait for bypass */ + ldr r8, [r4] @ stat value + and r8, r8, #0x3 @ mask for stat + cmp r8, #0x1 @ there yet + bne block @ loop if not + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div @ get addr + str r0, [r4] @ set dpll ctrl val + + ldr r4, set_config @ get addr + mov r8, #1 @ valid cfg msk + str r8, [r4] @ make dividers take + + mov r4, #100 @ dead spin a bit +wait_a_bit: + subs r4, r4, #1 @ dec loop + bne wait_a_bit @ delay done? + + /* check if staying in bypass */ + cmp r2, #0x1 @ stay in bypass? + beq pend @ jump over dpll relock + + /* relock DPLL with new vals */ + ldr r5, pll_stat @ get addr + ldr r4, pll_ctl @ get addr + orr r8, r7, #0x3 @ val for lock dpll + str r8, [r4] @ set val + mov r0, #1000 @ dead spin a bit +wait_more: + subs r0, r0, #1 @ dec loop + bne wait_more @ delay done? +wait_lock: + ldr r8, [r5] @ get lock val + and r8, r8, #3 @ isolate field + cmp r8, #2 @ locked? + bne wait_lock @ wait if not +pend: + /* update memory timings & briefly lock dll */ + ldr r4, sdrc_rfr @ get addr + str r1, [r4] @ update refresh timing + ldr r11, dlla_ctrl @ get addr of DLLA ctrl + ldr r10, [r11] @ get current val + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + str r10, [r11] @ commit to DLLA_CTRL + add r11, r11, #0x8 @ move to dllb + str r10, [r11] @ hit DLLB also + + mov r4, #0x800 @ relock time (min 0x400 L3 clocks) +wait_dll_lock: + subs r4, r4, #0x1 + bne wait_dll_lock + nop + ldmfd sp!, {r0-r12, pc} @ restore regs and return + +set_config: + .word PRCM_CLKCFG_CTRL_V +pll_ctl: + .word CM_CLKEN_PLL_V +pll_stat: + .word CM_IDLEST_CKGEN_V +pll_div: + .word CM_CLKSEL1_PLL_V +sdrc_rfr: + .word SDRC_RFR_CTRL_V +dlla_ctrl: + .word SDRC_DLLA_CTRL_V + +ENTRY(sram_set_prcm_sz) + .word . - sram_set_prcm diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c new file mode 100644 index 00000000000..9ec11443200 --- /dev/null +++ b/arch/arm/mach-omap2/timer-gp.c @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/mach-omap2/timer-gp.c + * + * OMAP2 GP timer support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <asm/mach/time.h> +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#define OMAP2_GP_TIMER1_BASE 0x48028000 +#define OMAP2_GP_TIMER2_BASE 0x4802a000 +#define OMAP2_GP_TIMER3_BASE 0x48078000 +#define OMAP2_GP_TIMER4_BASE 0x4807a000 + +#define GP_TIMER_TIDR 0x00 +#define GP_TIMER_TISR 0x18 +#define GP_TIMER_TIER 0x1c +#define GP_TIMER_TCLR 0x24 +#define GP_TIMER_TCRR 0x28 +#define GP_TIMER_TLDR 0x2c +#define GP_TIMER_TSICR 0x40 + +#define OS_TIMER_NR 1 /* GP timer 2 */ + +static unsigned long timer_base[] = { + IO_ADDRESS(OMAP2_GP_TIMER1_BASE), + IO_ADDRESS(OMAP2_GP_TIMER2_BASE), + IO_ADDRESS(OMAP2_GP_TIMER3_BASE), + IO_ADDRESS(OMAP2_GP_TIMER4_BASE), +}; + +static inline unsigned int timer_read_reg(int nr, unsigned int reg) +{ + return __raw_readl(timer_base[nr] + reg); +} + +static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val) +{ + __raw_writel(val, timer_base[nr] + reg); +} + +/* Note that we always enable the clock prescale divider bit */ +static inline void omap2_gp_timer_start(int nr, unsigned long load_val) +{ + unsigned int tmp; + + tmp = 0xffffffff - load_val; + + timer_write_reg(nr, GP_TIMER_TLDR, tmp); + timer_write_reg(nr, GP_TIMER_TCRR, tmp); + timer_write_reg(nr, GP_TIMER_TIER, 1 << 1); + timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1); +} + +static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1); + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction omap2_gp_timer_irq = { + .name = "gp timer", + .flags = SA_INTERRUPT, + .handler = omap2_gp_timer_interrupt, +}; + +static void __init omap2_gp_timer_init(void) +{ + struct clk * sys_ck; + u32 tick_period = 120000; + u32 l; + + /* Reset clock and prescale value */ + timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0); + + sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(sys_ck)) + printk(KERN_ERR "Could not get sys_ck\n"); + else { + clk_use(sys_ck); + tick_period = clk_get_rate(sys_ck) / 100; + clk_put(sys_ck); + } + + tick_period /= 2; /* Minimum prescale divider is 2 */ + tick_period -= 1; + + l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR); + printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n", + (l >> 4) & 0x0f, l & 0x0f); + + setup_irq(38, &omap2_gp_timer_irq); + + omap2_gp_timer_start(OS_TIMER_NR, tick_period); +} + +struct sys_timer omap_timer = { + .init = omap2_gp_timer_init, +}; + diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index b380a438e68..e201aa9765b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -60,6 +60,7 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx + select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -102,12 +103,18 @@ config IWMMXT config PXA_SHARP_C7xx bool + select PXA_SSP help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool + select PXA_SSP help Enable common support for Sharp Cxx00 models +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 8bc72d07cea..d210bd5032c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,8 +11,8 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PXA_SSP) += ssp.o ifeq ($(CONFIG_PXA27x),y) obj-$(CONFIG_PM) += standby.o diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index eb5f6d744a4..100fb31b515 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +struct platform_device corgiscoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &corgi_scoop_setup, + }, + .num_resources = ARRAY_SIZE(corgi_scoop_resources), + .resource = corgi_scoop_resources, +}; + +static void corgi_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { { .dev = &corgiscoop_device.dev, @@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { }, }; -struct platform_device corgiscoop_device = { - .name = "sharp-scoop", - .id = -1, - .dev = { - .platform_data = &corgi_scoop_setup, - }, - .num_resources = ARRAY_SIZE(corgi_scoop_resources), - .resource = corgi_scoop_resources, +static struct scoop_pcmcia_config corgi_pcmcia_config = { + .devs = &corgi_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = corgi_pcmcia_init, }; +EXPORT_SYMBOL(corgiscoop_device); + /* * Corgi SSP Device @@ -294,8 +323,7 @@ static void __init corgi_init(void) pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); - scoop_num = 1; - scoop_devs = &corgi_pcmcia_scoop[0]; + platform_scoop_config = &corgi_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 591e5f32dbe..b371d723635 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -191,7 +191,7 @@ void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) ssp_machinfo = machinfo; } -static int __init corgi_ssp_probe(struct device *dev) +static int __init corgi_ssp_probe(struct platform_device *dev) { int ret; @@ -203,7 +203,7 @@ static int __init corgi_ssp_probe(struct device *dev) GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port); + ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); if (ret) printk(KERN_ERR "Unable to register SSP handler!\n"); @@ -216,13 +216,13 @@ static int __init corgi_ssp_probe(struct device *dev) return ret; } -static int corgi_ssp_remove(struct device *dev) +static int corgi_ssp_remove(struct platform_device *dev) { ssp_exit(&corgi_ssp_dev); return 0; } -static int corgi_ssp_suspend(struct device *dev, pm_message_t state) +static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) { ssp_flush(&corgi_ssp_dev); ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); @@ -230,7 +230,7 @@ static int corgi_ssp_suspend(struct device *dev, pm_message_t state) return 0; } -static int corgi_ssp_resume(struct device *dev) +static int corgi_ssp_resume(struct platform_device *dev) { GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ @@ -241,18 +241,19 @@ static int corgi_ssp_resume(struct device *dev) return 0; } -static struct device_driver corgissp_driver = { - .name = "corgi-ssp", - .bus = &platform_bus_type, +static struct platform_driver corgissp_driver = { .probe = corgi_ssp_probe, .remove = corgi_ssp_remove, .suspend = corgi_ssp_suspend, .resume = corgi_ssp_resume, + .driver = { + .name = "corgi-ssp", + }, }; int __init corgi_ssp_init(void) { - return driver_register(&corgissp_driver); + return platform_driver_register(&corgissp_driver); } arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ad6a13f95a6..eef3de26ad3 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static void poodle_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { { .dev = &poodle_scoop_device.dev, @@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config poodle_pcmcia_config = { + .devs = &poodle_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = poodle_pcmcia_init, +}; + +EXPORT_SYMBOL(poodle_scoop_device); + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -268,8 +297,7 @@ static void __init poodle_init(void) pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); - scoop_num = 1; - scoop_devs = &poodle_pcmcia_scoop[0]; + platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 3977a77aacd..4879c0f7da7 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -32,3 +32,90 @@ void corgi_put_hsync(void); void spitz_put_hsync(void); void corgi_wait_hsync(void); void spitz_wait_hsync(void); + +/* + * SharpSL Battery/PM Driver + */ + +struct sharpsl_charger_machinfo { + void (*init)(void); + int gpio_acin; + int gpio_batfull; + int gpio_batlock; + int gpio_fatal; + int (*status_acin)(void); + void (*discharge)(int); + void (*discharge1)(int); + void (*charge)(int); + void (*chargeled)(int); + void (*measure_temp)(int); + void (*presuspend)(void); + void (*postsuspend)(void); + unsigned long (*charger_wakeup)(void); + int (*should_wakeup)(unsigned int resume_on_alarm); + int bat_levels; + struct battery_thresh *bat_levels_noac; + struct battery_thresh *bat_levels_acin; + int status_high_acin; + int status_low_acin; + int status_high_noac; + int status_low_noac; +}; + +struct battery_thresh { + int voltage; + int percentage; +}; + +struct battery_stat { + int ac_status; /* APM AC Present/Not Present */ + int mainbat_status; /* APM Main Battery Status */ + int mainbat_percent; /* Main Battery Percentage Charge */ + int mainbat_voltage; /* Main Battery Voltage */ +}; + +struct sharpsl_pm_status { + struct device *dev; + struct timer_list ac_timer; + struct timer_list chrg_full_timer; + + int charge_mode; +#define CHRG_ERROR (-1) +#define CHRG_OFF (0) +#define CHRG_ON (1) +#define CHRG_DONE (2) + + unsigned int flags; +#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ +#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ +#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ +#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ +#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ + + int full_count; + unsigned long charge_start_time; + struct sharpsl_charger_machinfo *machinfo; + struct battery_stat battstat; +}; + +extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh spitz_battery_levels_acin[]; +extern struct battery_thresh spitz_battery_levels_noac[]; + +#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) + +#define SHARPSL_LED_ERROR 2 +#define SHARPSL_LED_ON 1 +#define SHARPSL_LED_OFF 0 + +#define CHARGE_ON() sharpsl_pm.machinfo->charge(1) +#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0) +#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON) +#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF) +#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) +#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) +#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) +#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin() +#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) +#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) +#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c new file mode 100644 index 00000000000..6c9e871c53d --- /dev/null +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -0,0 +1,992 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 + * series of PDAs + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on code written by Sharp for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/apm_bios.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/hardware/scoop.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/apm.h> + +#include <asm/arch/pm.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/sharpsl.h> +#include "sharpsl.h" + +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + +struct battery_thresh spitz_battery_levels_acin[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 192, 45}, + { 191, 43}, + { 191, 40}, + { 190, 38}, + { 190, 35}, + { 189, 33}, + { 188, 30}, + { 187, 28}, + { 186, 25}, + { 185, 23}, + { 184, 20}, + { 183, 18}, + { 182, 15}, + { 181, 13}, + { 180, 10}, + { 179, 8}, + { 178, 5}, + { 0, 0}, +}; + +struct battery_thresh spitz_battery_levels_noac[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 191, 45}, + { 190, 43}, + { 189, 40}, + { 188, 38}, + { 187, 35}, + { 186, 33}, + { 185, 30}, + { 184, 28}, + { 183, 25}, + { 182, 23}, + { 181, 20}, + { 180, 18}, + { 179, 15}, + { 178, 13}, + { 177, 10}, + { 176, 8}, + { 175, 5}, + { 0, 0}, +}; + +/* MAX1111 Commands */ +#define MAXCTRL_PD0 1u << 0 +#define MAXCTRL_PD1 1u << 1 +#define MAXCTRL_SGL 1u << 2 +#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_SEL_SH 4 +#define MAXCTRL_STR 1u << 7 + +/* MAX1111 Channel Definitions */ +#define BATT_AD 4u +#define BATT_THM 2u +#define JK_VAD 6u + + +/* + * Prototypes + */ +static int sharpsl_read_MainBattery(void); +static int sharpsl_off_charge_battery(void); +static int sharpsl_check_battery(int mode); +static int sharpsl_ac_check(void); +static int sharpsl_fatal_check(void); +static int sharpsl_average_value(int ad); +static void sharpsl_average_clear(void); +static void sharpsl_charge_toggle(void *private_); +static void sharpsl_battery_thread(void *private_); + + +/* + * Variables + */ +struct sharpsl_pm_status sharpsl_pm; +DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); +DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); + + +static int get_percentage(int voltage) +{ + int i = sharpsl_pm.machinfo->bat_levels - 1; + struct battery_thresh *thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) + thresh=sharpsl_pm.machinfo->bat_levels_acin; + else + thresh=sharpsl_pm.machinfo->bat_levels_noac; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int get_apm_status(int voltage) +{ + int low_thresh, high_thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) { + high_thresh = sharpsl_pm.machinfo->status_high_acin; + low_thresh = sharpsl_pm.machinfo->status_low_acin; + } else { + high_thresh = sharpsl_pm.machinfo->status_high_noac; + low_thresh = sharpsl_pm.machinfo->status_low_noac; + } + + if (voltage >= high_thresh) + return APM_BATTERY_STATUS_HIGH; + if (voltage >= low_thresh) + return APM_BATTERY_STATUS_LOW; + return APM_BATTERY_STATUS_CRITICAL; +} + +void sharpsl_battery_kick(void) +{ + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); +} +EXPORT_SYMBOL(sharpsl_battery_kick); + + +static void sharpsl_battery_thread(void *private_) +{ + int voltage, percent, apm_status, i = 0; + + if (!sharpsl_pm.machinfo) + return; + + sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE); + + /* Corgi cannot confirm when battery fully charged so periodically kick! */ + if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) + schedule_work(&toggle_charger); + + while(1) { + voltage = sharpsl_read_MainBattery(); + if (voltage > 0) break; + if (i++ > 5) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + break; + } + } + + voltage = sharpsl_average_value(voltage); + apm_status = get_apm_status(voltage); + percent = get_percentage(voltage); + + /* At low battery voltages, the voltage has a tendency to start + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + sharpsl_pm.battstat.mainbat_voltage = voltage; + sharpsl_pm.battstat.mainbat_status = apm_status; + sharpsl_pm.battstat.mainbat_percent = percent; + } + + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + + /* If battery is low. limit backlight intensity to save power. */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || + (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { + corgibl_limit_intensity(1); + sharpsl_pm.flags |= SHARPSL_BL_LIMIT; + } + } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { + corgibl_limit_intensity(0); + sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; + } + + /* Suspend if critical battery level */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + dev_err(sharpsl_pm.dev, "Fatal Off\n"); + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); +} + +static void sharpsl_charge_on(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); + + sharpsl_pm.full_count = 0; + sharpsl_pm.charge_mode = CHRG_ON; + schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); +} + +static void sharpsl_charge_off(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); + + CHARGE_OFF(); + CHARGE_LED_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + + schedule_work(&sharpsl_bat); +} + +static void sharpsl_charge_error(void) +{ + CHARGE_LED_ERR(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_ERROR; +} + +static void sharpsl_charge_toggle(void *private_) +{ + dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + + if (STATUS_AC_IN == 0) { + sharpsl_charge_off(); + return; + } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) { + sharpsl_charge_error(); + return; + } + + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_start_time = jiffies; +} + +static void sharpsl_ac_timer(unsigned long data) +{ + int acin = STATUS_AC_IN; + + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + + sharpsl_average_clear(); + if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) + sharpsl_charge_on(); + else if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + + schedule_work(&sharpsl_bat); +} + + +static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + /* Delay the event slightly to debounce */ + /* Must be a smaller delay than the chrg_full_isr below */ + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void sharpsl_chrg_full_timer(unsigned long data) +{ + dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); + + sharpsl_pm.full_count++; + + if (STATUS_AC_IN == 0) { + dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + } else if (sharpsl_pm.full_count < 2) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); + schedule_work(&toggle_charger); + } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); + schedule_work(&toggle_charger); + } else { + sharpsl_charge_off(); + sharpsl_pm.charge_mode = CHRG_DONE; + dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); + } +} + +/* Charging Finished Interrupt (Not present on Corgi) */ +/* Can trigger at the same time as an AC staus change so + delay until after that has been processed */ +static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) + return IRQ_HANDLED; + + /* delay until after any ac interrupt */ + mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + int is_fatal = 0; + + if (STATUS_BATT_LOCKED == 0) { + dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); + is_fatal = 1; + } + + if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) { + dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); + is_fatal = 1; + } + + if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + return IRQ_HANDLED; +} + +/* + * Maintain an average of the last 10 readings + */ +#define SHARPSL_CNV_VALUE_NUM 10 +static int sharpsl_ad_index; + +static void sharpsl_average_clear(void) +{ + sharpsl_ad_index = 0; +} + +static int sharpsl_average_value(int ad) +{ + int i, ad_val = 0; + static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; + + if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { + sharpsl_ad_index = 0; + return ad; + } + + sharpsl_ad[sharpsl_ad_index] = ad; + sharpsl_ad_index++; + if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { + for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + sharpsl_ad[i] = sharpsl_ad[i+1]; + sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; + } + for (i=0; i < sharpsl_ad_index; i++) + ad_val += sharpsl_ad[i]; + + return (ad_val / sharpsl_ad_index); +} + + +/* + * Read MAX1111 ADC + */ +static int read_max1111(int channel) +{ + return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 + | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); +} + +static int sharpsl_read_MainBattery(void) +{ + return read_max1111(BATT_AD); +} + +static int sharpsl_read_Temp(void) +{ + int temp; + + sharpsl_pm.machinfo->measure_temp(1); + + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + temp = read_max1111(BATT_THM); + + sharpsl_pm.machinfo->measure_temp(0); + + return temp; +} + +static int sharpsl_read_jkvad(void) +{ + return read_max1111(JK_VAD); +} + +/* + * Take an array of 5 integers, remove the maximum and minimum values + * and return the average. + */ +static int get_select_val(int *val) +{ + int i, j, k, temp, sum = 0; + + /* Find MAX val */ + temp = val[0]; + j=0; + for (i=1; i<5; i++) { + if (temp < val[i]) { + temp = val[i]; + j = i; + } + } + + /* Find MIN val */ + temp = val[4]; + k=4; + for (i=3; i>=0; i--) { + if (temp > val[i]) { + temp = val[i]; + k = i; + } + } + + for (i=0; i<5; i++) + if (i != j && i != k ) + sum += val[i]; + + dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); + + return (sum/3); +} + +/* mode 0 - Check temperature and voltage + * 1 - Check temperature only */ +static int sharpsl_check_battery(int mode) +{ + int val, i, buff[5]; + + /* Check battery temperature */ + for (i=0; i<5; i++) { + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + buff[i] = sharpsl_read_Temp(); + } + + val = get_select_val(buff); + + dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); + if (val > SHARPSL_CHARGE_ON_TEMP) + return -1; + if (mode == 1) + return 0; + + /* disable charge, enable discharge */ + CHARGE_OFF(); + DISCHARGE_ON(); + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery voltage */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_MainBattery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + DISCHARGE_OFF(); + + val = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); + + if (val < SHARPSL_CHARGE_ON_VOLT) + return -1; + + return 0; +} + +static int sharpsl_ac_check(void) +{ + int temp, i, buff[5]; + + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_jkvad(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + + if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) { + dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) +{ + sharpsl_pm.flags |= SHARPSL_SUSPENDED; + flush_scheduled_work(); + + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + else + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + + return 0; +} + +static int sharpsl_pm_resume(struct device *dev) +{ + /* Clear the reset source indicators as they break the bootloader upon reboot */ + RCSR = 0x0f; + sharpsl_average_clear(); + sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; + sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; + + return 0; +} + +static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ + + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) { + dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + sharpsl_off_charge_battery(); + } + + sharpsl_pm.machinfo->presuspend(); + + PEDR = 0xffffffff; /* clear it */ + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { + RTSR &= RTSR_ALE; + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { + RTSR &= RTSR_ALE; + RTAR = alarm_time; + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + } + + pxa_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); +} + +static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) + { + if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { + dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + if(sharpsl_off_charge_battery()) { + dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); + } + + if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) ) + { + dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + + return 0; +} + +static int corgi_pxa_pm_enter(suspend_state_t state) +{ + unsigned long alarm_time = RTAR; + unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + + corgi_goto_sleep(alarm_time, alarm_status, state); + + while (corgi_enter_suspend(alarm_time,alarm_status,state)) + {} + + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); + + return 0; +} +#endif + + +/* + * Check for fatal battery errors + * Fatal returns -1 + */ +static int sharpsl_fatal_check(void) +{ + int buff[5], temp, i, acin; + + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); + + /* Check AC-Adapter */ + acin = STATUS_AC_IN; + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + CHARGE_OFF(); + udelay(100); + DISCHARGE_ON(); /* enable discharge */ + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery : check inserting battery ? */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_MainBattery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + udelay(100); + CHARGE_ON(); + DISCHARGE_OFF(); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery()); + + if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || + (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + return -1; + return 0; +} + +static int sharpsl_off_charge_error(void) +{ + dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + CHARGE_OFF(); + CHARGE_LED_ERR(); + sharpsl_pm.charge_mode = CHRG_ERROR; + return 1; +} + +/* + * Charging Control while suspended + * Return 1 - go straight to sleep + * Return 0 - sleep or wakeup depending on other factors + */ +static int sharpsl_off_charge_battery(void) +{ + int time; + + dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); + + if (sharpsl_pm.charge_mode == CHRG_OFF) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); + + /* AC Check */ + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0)) + return sharpsl_off_charge_error(); + + /* Start Charging */ + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_mode = CHRG_ON; + sharpsl_pm.full_count = 0; + + return 1; + } else if (sharpsl_pm.charge_mode != CHRG_ON) { + return 1; + } + + if (sharpsl_pm.full_count == 0) { + int time; + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); + + if (sharpsl_check_battery(0) < 0) + return sharpsl_off_charge_error(); + + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + sharpsl_pm.charge_mode = CHRG_ON; + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) + return 1; + if (STATUS_CHRG_FULL) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + sharpsl_pm.full_count++; + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + return 1; + } + } + } + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { + if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); + sharpsl_pm.full_count = 0; + } + sharpsl_pm.full_count++; + return 1; + } + if (STATUS_CHRG_FULL) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_DONE; + return 1; + } + } +} + + +static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); +} + +static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); +} + +static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); +static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); + +extern void (*apm_get_power_status)(struct apm_power_info *); + +static void sharpsl_apm_get_power_status(struct apm_power_info *info) +{ + info->ac_line_status = sharpsl_pm.battstat.ac_status; + + if (sharpsl_pm.charge_mode == CHRG_ON) + info->battery_status = APM_BATTERY_STATUS_CHARGING; + else + info->battery_status = sharpsl_pm.battstat.mainbat_status; + + info->battery_flag = (1 << info->battery_status); + info->battery_life = sharpsl_pm.battstat.mainbat_percent; +} + +static struct pm_ops sharpsl_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = pxa_pm_prepare, + .enter = corgi_pxa_pm_enter, + .finish = pxa_pm_finish, +}; + +static int __init sharpsl_pm_probe(struct device *dev) +{ + if (!dev->platform_data) + return -EINVAL; + + sharpsl_pm.dev = dev; + sharpsl_pm.machinfo = dev->platform_data; + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags = 0; + + sharpsl_pm.machinfo->init(); + + init_timer(&sharpsl_pm.ac_timer); + sharpsl_pm.ac_timer.function = sharpsl_ac_timer; + + init_timer(&sharpsl_pm.chrg_full_timer); + sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; + + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN); + + /* Register interrupt handlers */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + + if (sharpsl_pm.machinfo->gpio_fatal) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + } + + if (!machine_is_corgi()) + { + /* Register interrupt handler. */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + } + + device_create_file(dev, &dev_attr_battery_percentage); + device_create_file(dev, &dev_attr_battery_voltage); + + apm_get_power_status = sharpsl_apm_get_power_status; + + pm_set_ops(&sharpsl_pm_ops); + + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; +} + +static int sharpsl_pm_remove(struct device *dev) +{ + pm_set_ops(NULL); + + device_remove_file(dev, &dev_attr_battery_percentage); + device_remove_file(dev, &dev_attr_battery_voltage); + + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + + if (sharpsl_pm.machinfo->gpio_fatal) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + + if (!machine_is_corgi()) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + + del_timer_sync(&sharpsl_pm.chrg_full_timer); + del_timer_sync(&sharpsl_pm.ac_timer); + + return 0; +} + +static struct device_driver sharpsl_pm_driver = { + .name = "sharpsl-pm", + .bus = &platform_bus_type, + .probe = sharpsl_pm_probe, + .remove = sharpsl_pm_remove, + .suspend = sharpsl_pm_suspend, + .resume = sharpsl_pm_resume, +}; + +static int __devinit sharpsl_pm_init(void) +{ + return driver_register(&sharpsl_pm_driver); +} + +static void sharpsl_pm_exit(void) +{ + driver_unregister(&sharpsl_pm_driver); +} + +late_initcall(sharpsl_pm_init); +module_exit(sharpsl_pm_exit); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6c6878cd220..4e9a699ee42 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; +#define SPITZ_PWR_SD 0x01 +#define SPITZ_PWR_CF 0x02 + +/* Power control is shared with between one of the CF slots and SD */ +static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +{ + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (new_cpr & 0x0007) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) + mdelay(5); + if (device == SPITZ_PWR_CF) + cpr |= 0x0002; + if (device == SPITZ_PWR_SD) + cpr |= 0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + } else { + if (device == SPITZ_PWR_CF) + cpr &= ~0x0002; + if (device == SPITZ_PWR_SD) + cpr &= ~0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static void spitz_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); + GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); +} + +static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +{ + /* Only need to override behaviour for slot 0 */ + if (nr == 0) + spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + else + write_scoop_reg(scoop, SCOOP_CPR, cpr); +} + static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { { .dev = &spitzscoop_device.dev, @@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config spitz_pcmcia_config = { + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = spitz_pcmcia_init, + .power_ctrl = spitz_pcmcia_pwr, +}; + +EXPORT_SYMBOL(spitzscoop_device); +EXPORT_SYMBOL(spitzscoop2_device); + /* * Spitz SSP Device @@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in return 0; } -/* Power control is shared with one of the CF slots so we have a mess */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); - - if (( 1 << vdd) & p_d->ocr_mask) { - /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - mdelay(2); - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); - } else { - /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); - - if (!(cpr | 0x02)) { - mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - } - } + if (( 1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + else + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); } static int spitz_mci_get_ro(struct device *dev) @@ -351,8 +408,8 @@ static void __init common_init(void) static void __init spitz_init(void) { - scoop_num = 2; - scoop_devs = &spitz_pcmcia_scoop[0]; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; common_init(); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 4d826c02131..a68b30eff4d 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -19,6 +19,8 @@ * 22nd Aug 2003 Initial version. * 20th Dec 2004 Added ssp_config for changing port config without * closing the port. + * 4th Aug 2005 Added option to disable irq handler registration and + * cleaned up irq and clock detection. */ #include <linux/module.h> @@ -37,6 +39,26 @@ #define PXA_SSP_PORTS 3 +struct ssp_info_ { + int irq; + u32 clock; +}; + +/* + * SSP port clock and IRQ settings + */ +static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { +#if defined (CONFIG_PXA27x) + {IRQ_SSP, CKEN23_SSP1}, + {IRQ_SSP2, CKEN3_SSP2}, + {IRQ_SSP3, CKEN4_SSP3}, +#else + {IRQ_SSP, CKEN3_SSP}, + {IRQ_NSSP, CKEN9_NSSP}, + {IRQ_ASSP, CKEN10_ASSP}, +#endif +}; + static DECLARE_MUTEX(sem); static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; @@ -210,9 +232,9 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee * %-EBUSY if the resources are already in use * %0 on success */ -int ssp_init(struct ssp_dev *dev, u32 port) +int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) { - int ret, irq; + int ret; if (port > PXA_SSP_PORTS || port == 0) return -ENODEV; @@ -229,61 +251,20 @@ int ssp_init(struct ssp_dev *dev, u32 port) up(&sem); return -EBUSY; } - - switch (port) { - case 1: - irq = IRQ_SSP; - break; -#if defined (CONFIG_PXA27x) - case 2: - irq = IRQ_SSP2; - break; - case 3: - irq = IRQ_SSP3; - break; -#else - case 2: - irq = IRQ_NSSP; - break; - case 3: - irq = IRQ_ASSP; - break; -#endif - default: - return -ENODEV; - } - dev->port = port; - ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev); - if (ret) - goto out_region; + /* do we need to get irq */ + if (!(init_flags & SSP_NO_IRQ)) { + ret = request_irq(ssp_info[port-1].irq, ssp_interrupt, + 0, "SSP", dev); + if (ret) + goto out_region; + dev->irq = ssp_info[port-1].irq; + } else + dev->irq = 0; /* turn on SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - pxa_set_cken(CKEN23_SSP1, 1); - break; - case 2: - pxa_set_cken(CKEN3_SSP2, 1); - break; - case 3: - pxa_set_cken(CKEN4_SSP3, 1); - break; -#else - case 1: - pxa_set_cken(CKEN3_SSP, 1); - break; - case 2: - pxa_set_cken(CKEN9_NSSP, 1); - break; - case 3: - pxa_set_cken(CKEN10_ASSP, 1); - break; -#endif - } - + pxa_set_cken(ssp_info[port-1].clock, 1); up(&sem); return 0; @@ -301,46 +282,17 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - int irq; - down(&sem); SSCR0_P(dev->port) &= ~SSCR0_SSE; - /* find irq, save power and turn off SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN23_SSP1, 0); - break; - case 2: - irq = IRQ_SSP2; - pxa_set_cken(CKEN3_SSP2, 0); - break; - case 3: - irq = IRQ_SSP3; - pxa_set_cken(CKEN4_SSP3, 0); - break; -#else - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN3_SSP, 0); - break; - case 2: - irq = IRQ_NSSP; - pxa_set_cken(CKEN9_NSSP, 0); - break; - case 3: - irq = IRQ_ASSP; - pxa_set_cken(CKEN10_ASSP, 0); - break; -#endif - default: - printk(KERN_WARNING "SSP: tried to close invalid port\n"); - return; + if (dev->port > PXA_SSP_PORTS || dev->port == 0) { + printk(KERN_WARNING "SSP: tried to close invalid port\n"); + return; } - free_irq(irq, dev); + pxa_set_cken(ssp_info[dev->port-1].clock, 0); + if (dev->irq) + free_irq(dev->irq, dev); release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); use_count[dev->port - 1]--; up(&sem); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7dad3f1465e..b9b2057349e 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -132,11 +132,13 @@ static void __init pxa_timer_init(void) tv.tv_sec = pxa_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 400609f8b6a..c312054dfb8 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = { .resource = tosa_scoop_jc_resources, }; +/* + * PCMCIA + */ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { { .dev = &tosascoop_device.dev, @@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { }, }; +static void tosa_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + +static struct scoop_pcmcia_config tosa_pcmcia_config = { + .devs = &tosa_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = tosa_pcmcia_init, +}; + +/* + * USB Device Controller + */ +static void tosa_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + } +} + +static int tosa_udc_is_connected(void) +{ + return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +} + + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, + .udc_is_connected = tosa_udc_is_connected, +}; + +/* + * MMC/SD Device + */ +static struct pxamci_platform_data tosa_mci_platform_data; + +static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); + + tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, + "MMC/SD card detect", data); + if (err) { + printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void tosa_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } else { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } +} + +static int tosa_mci_get_ro(struct device *dev) +{ + return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); +} + +static void tosa_mci_exit(struct device *dev, void *data) +{ + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data tosa_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = tosa_mci_init, + .get_ro = tosa_mci_get_ro, + .setpower = tosa_mci_setpower, + .exit = tosa_mci_exit, +}; + +/* + * Irda + */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); + pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); + } else { + pxa_gpio_mode(GPIO47_STTXD_MD); + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + } +} + +static struct pxaficp_platform_data tosa_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = tosa_irda_transceiver_mode, +}; + +/* + * Tosa Keyboard + */ +static struct platform_device tosakbd_device = { + .name = "tosa-keyboard", + .id = -1, +}; static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tosakbd_device, }; static void __init tosa_init(void) { pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); /* setup sleep mode values */ PWER = 0x00000002; @@ -131,13 +273,15 @@ static void __init tosa_init(void) PGSR2 = 0x00014000; PCFR |= PCFR_OPDE; - // enable batt_fault + /* enable batt_fault */ PMCR = 0x01; - platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_mci_info(&tosa_mci_platform_data); + pxa_set_udc_info(&udc_info); + pxa_set_ficp_info(&tosa_ficp_platform_data); + platform_scoop_config = &tosa_pcmcia_config; - scoop_num = 2; - scoop_devs = &tosa_pcmcia_scoop[0]; + platform_add_devices(devices, ARRAY_SIZE(devices)); } static void __init fixup_tosa(struct machine_desc *desc, diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 011a85c1062..36e76ba937f 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -5,3 +5,5 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 482eb512ebe..e2c6fa23d3c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg timer_tick(regs); +#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS) + smp_send_timer(); + update_process_times(user_mode(regs)); +#endif + write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c new file mode 100644 index 00000000000..09748cbcd10 --- /dev/null +++ b/arch/arm/mach-realview/hotplug.c @@ -0,0 +1,138 @@ +/* + * linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( "mcr p15, 0, %1, c7, c14, 0\n" + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * The trouble is, letting people know about this is not really + * possible, since we are currently running incoherently, and + * therefore cannot safely call printk() or anything else + */ +#ifdef DEBUG + printk("CPU%u: spurious wakeup call\n", cpu); +#endif + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); +} + +int mach_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c new file mode 100644 index 00000000000..5e917e37d09 --- /dev/null +++ b/arch/arm/mach-realview/localtimer.c @@ -0,0 +1,130 @@ +/* + * linux/arch/arm/mach-realview/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> + +#include <asm/mach/time.h> +#include <asm/hardware/arm_twd.h> +#include <asm/hardware/gic.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include "core.h" + +#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \ + ((cpu) * REALVIEW_TWD_SIZE)) + +static unsigned long mpcore_timer_rate; + +/* + * local_timer_ack: checks for a local timer interrupt. + * + * If a local timer interrupt has occured, acknowledge and return 1. + * Otherwise, return 0. + */ +int local_timer_ack(void) +{ + void __iomem *base = TWD_BASE(smp_processor_id()); + + if (__raw_readl(base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, base + TWD_TIMER_INTSTAT); + return 1; + } + + return 0; +} + +void __cpuinit local_timer_setup(unsigned int cpu) +{ + void __iomem *base = TWD_BASE(cpu); + unsigned int load, offset; + u64 waitjiffies; + unsigned int count; + + /* + * If this is the first time round, we need to work out how fast + * the timer ticks + */ + if (mpcore_timer_rate == 0) { + printk("Calibrating local timer... "); + + /* Wait for a tick to start */ + waitjiffies = get_jiffies_64() + 1; + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + /* OK, now the tick has started, let's get the timer going */ + waitjiffies += 5; + + /* enable, no interrupt or reload */ + __raw_writel(0x1, base + TWD_TIMER_CONTROL); + + /* maximum value */ + __raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER); + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + count = __raw_readl(base + TWD_TIMER_COUNTER); + + mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); + + printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000, + (mpcore_timer_rate / 100000) % 100); + } + + load = mpcore_timer_rate / HZ; + + __raw_writel(load, base + TWD_TIMER_LOAD); + __raw_writel(0x7, base + TWD_TIMER_CONTROL); + + /* + * Now maneuver our local tick into the right part of the jiffy. + * Start by working out where within the tick our local timer + * interrupt should go. + */ + offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1); + + /* + * gettimeoffset() will return a number of us since the last tick. + * Convert this number of us to a local timer tick count. + * Be careful of integer overflow whilst keeping maximum precision. + * + * with HZ=100 and 1MHz (fpga) ~ 1GHz processor: + * load = 1 ~ 10,000 + * mpcore_timer_rate/10000 = 100 ~ 100,000 + * + * so the multiply value will be less than 10^9 always. + */ + load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100; + + /* Add on our offset to get the load value */ + load = (load + offset) % (mpcore_timer_rate / HZ); + + __raw_writel(load, base + TWD_TIMER_COUNTER); + + /* Make sure our local interrupt controller has this enabled */ + __raw_writel(1 << IRQ_LOCALTIMER, + __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET); +} + +/* + * take a local timer down + */ +void __cpuexit local_timer_stop(unsigned int cpu) +{ + __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL); +} diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 9844644d0fb..0c7d4ac9a7b 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -32,7 +32,7 @@ static unsigned int __init get_core_count(void) { unsigned int ncores; - ncores = __raw_readl(IO_ADDRESS(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG); + ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG); return (ncores & 0x03) + 1; } @@ -133,12 +133,12 @@ static void __init poke_milo(void) #if 1 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30 __raw_writel(virt_to_phys(realview_secondary_startup), - (IO_ADDRESS(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSS_OFFSET)); + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSS_OFFSET); #define REALVIEW_SYS_FLAGSC_OFFSET 0x34 __raw_writel(3, - (IO_ADDRESS(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSC_OFFSET)); + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSC_OFFSET); #endif mb(); @@ -175,6 +175,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) max_cpus = ncores; /* + * Enable the local timer for primary CPU + */ + local_timer_setup(cpu); + + /* * Initialise the possible/present maps. * cpu_possible_map describes the set of CPUs which may be present * cpu_present_map describes the set of CPUs populated diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index c796bcdd615..0b9d7ca49ec 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG system resets depends on the value of PCLK. The timeout on an 200MHz s3c2410 should be about 30 seconds. +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on ARCH_S3C2410 + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + + comment "S3C2410 Setup" config S3C2410_DMA diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 8390b685c2b..0f81fc0c2f7 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -56,8 +56,16 @@ static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ - { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, + .type = MT_DEVICE + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, MT_DEVICE + }, /* we could possibly compress the next set down into a set of smaller tables * pagetables, but that would mean using an L2 section, and it still means @@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = { /* CPLD control registers */ - { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, - { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_VA_CTRL1, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_VA_CTRL2, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL2), + .length = SZ_4K, + .type =MT_DEVICE + }, /* IDE drives */ - { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, - - { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_IDEPRI, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDEPRIAUX, + .pfn = __phys_to_pfn(S3C2410_CS3+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESEC, + .pfn = __phys_to_pfn(S3C2410_CS4), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESECAUX, + .pfn = __phys_to_pfn(S3C2410_CS4+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 0b71c896bbd..1be2567a748 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -89,32 +89,63 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc bast_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, /* bast CPLD control registers, and external interrupt controls */ - { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE }, - + { + .virtual = (u32)BAST_VA_CTRL1, + .pfn = __phys_to_pfn(BAST_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL2, + .pfn = __phys_to_pfn(BAST_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL3, + .pfn = __phys_to_pfn(BAST_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL4, + .pfn = __phys_to_pfn(BAST_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* PC104 IRQ mux */ - { (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)BAST_VA_PC104_IRQREQ, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQRAW, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQMASK, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 24d69019a84..f8d86d1e16b 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -56,8 +56,17 @@ static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, }; diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d666c621ad0..4e31118533e 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -58,8 +58,27 @@ static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 46b259673c1..ae7e099bf6c 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -74,27 +74,47 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc vr1000_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* bast CPLD control registers, and external interrupt controls */ - { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers, and external interrupt controls */ + { + .virtual = (u32)VR1000_VA_CTRL1, + .pfn = __phys_to_pfn(VR1000_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL2, + .pfn = __phys_to_pfn(VR1000_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL3, + .pfn = __phys_to_pfn(VR1000_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL4, + .pfn = __phys_to_pfn(VR1000_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 69f1970646c..9e02bc3712a 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -137,7 +137,7 @@ static struct sa1100_port_fns neponset_port_fns __initdata = { .get_mctrl = neponset_get_mctrl, }; -static int neponset_probe(struct device *dev) +static int neponset_probe(struct platform_device *dev) { sa1100_register_uart_fns(&neponset_port_fns); @@ -178,27 +178,27 @@ static int neponset_probe(struct device *dev) /* * LDM power management. */ -static int neponset_suspend(struct device *dev, pm_message_t state) +static int neponset_suspend(struct platform_device *dev, pm_message_t state) { /* * Save state. */ - if (!dev->power.saved_state) - dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); - if (!dev->power.saved_state) + if (!dev->dev.power.saved_state) + dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); + if (!dev->dev.power.saved_state) return -ENOMEM; - *(unsigned int *)dev->power.saved_state = NCR_0; + *(unsigned int *)dev->dev.power.saved_state = NCR_0; return 0; } -static int neponset_resume(struct device *dev) +static int neponset_resume(struct platform_device *dev) { - if (dev->power.saved_state) { - NCR_0 = *(unsigned int *)dev->power.saved_state; - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; + if (dev->dev.power.saved_state) { + NCR_0 = *(unsigned int *)dev->dev.power.saved_state; + kfree(dev->dev.power.saved_state); + dev->dev.power.saved_state = NULL; } return 0; @@ -209,12 +209,13 @@ static int neponset_resume(struct device *dev) #define neponset_resume NULL #endif -static struct device_driver neponset_device_driver = { - .name = "neponset", - .bus = &platform_bus_type, +static struct platform_driver neponset_device_driver = { .probe = neponset_probe, .suspend = neponset_suspend, .resume = neponset_resume, + .driver = { + .name = "neponset", + }, }; static struct resource neponset_resources[] = { @@ -293,7 +294,7 @@ static struct platform_device *devices[] __initdata = { static int __init neponset_init(void) { - driver_register(&neponset_device_driver); + platform_driver_register(&neponset_device_driver); /* * The Neponset is only present on the Assabet machine type. diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 47e0420623f..e4b435e634e 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void) tv.tv_sec = sa1100_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &sa1100_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e3c14d6b432..e84fdde6edf 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -102,8 +102,8 @@ config CPU_ARM922T # ARM925T config CPU_ARM925T bool "Support ARM925T processor" if ARCH_OMAP1 - depends on ARCH_OMAP1510 - default y if ARCH_OMAP1510 + depends on ARCH_OMAP15XX + default y if ARCH_OMAP15XX select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 7e144f9cad1..9ccf1943fc9 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index a020fe16428..7ce39b986e2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -1,15 +1,20 @@ /* * linux/arch/arm/plat-omap/clock.c * - * Copyright (C) 2004 Nokia corporation + * Copyright (C) 2004 - 2005 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * + * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/version.h> +#include <linux/config.h> #include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -18,562 +23,20 @@ #include <asm/io.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> -#include <asm/arch/board.h> -#include <asm/arch/usb.h> -#include "clock.h" -#include "sram.h" +#include <asm/arch/clock.h> -static LIST_HEAD(clocks); +LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); -static DEFINE_SPINLOCK(clockfw_lock); -static void propagate_rate(struct clk * clk); -/* UART clock function */ -static int set_uart_rate(struct clk * clk, unsigned long rate); -/* External clock (MCLK & BCLK) functions */ -static int set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void init_ext_clk(struct clk * clk); -/* MPU virtual clock functions */ -static int select_table_rate(struct clk * clk, unsigned long rate); -static long round_to_table_rate(struct clk * clk, unsigned long rate); -void clk_setdpll(__u16, __u16); - -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - - -static void ckctl_recalc(struct clk * clk); -int __clk_enable(struct clk *clk); -void __clk_disable(struct clk *clk); -void __clk_unuse(struct clk *clk); -int __clk_use(struct clk *clk); - - -static void followparent_recalc(struct clk * clk) -{ - clk->rate = clk->parent->rate; -} - - -static void watchdog_recalc(struct clk * clk) -{ - clk->rate = clk->parent->rate / 14; -} - -static void uart_recalc(struct clk * clk) -{ - unsigned int val = omap_readl(clk->enable_reg); - if (val & clk->enable_bit) - clk->rate = 48000000; - else - clk->rate = 12000000; -} - -static struct clk ck_ref = { - .name = "ck_ref", - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_PROPAGATES | ALWAYS_ENABLED, -}; - -static struct clk ck_dpll1out = { - .name = "ck_dpll1out", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk armper_ck = { - .name = "armper_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct clk armxor_ck = { - .name = "armxor_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk armtim_ck = { - .name = "armtim_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, -}; - -static struct clk armwdt_ck = { - .name = "armwdt_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_WDTCK, - .recalc = &watchdog_recalc, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = ARM_CKCTL, - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | ALWAYS_ENABLED, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &followparent_recalc, - //.recalc = &ckctl_recalc, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -static struct clk tc_ck = { - .name = "tc_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - .name = "tibp_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - .name = "l3_ocpi_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; +DEFINE_SPINLOCK(clockfw_lock); -static struct clk tc1_ck = { - .name = "tc1_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; +static struct clk_functions *arch_clock; -static struct clk tc2_ck = { - .name = "tc2_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; +/*------------------------------------------------------------------------- + * Standard clock functions defined in asm/hardware/clock.h + *-------------------------------------------------------------------------*/ -static struct clk dma_ck = { - .name = "dma_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk api_ck = { - .name = "api_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, -}; - -static struct clk lb_ck = { - .name = "lb_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck = { - .name = "lcd_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | - RATE_CKCTL, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart1_16xx = { - .name = "uart1_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 29, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | - ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart3_16xx = { - .name = "uart3_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 31, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = ULPD_CLOCK_CTRL, - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = CLOCK_IN_OMAP1510 | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OTG_BASE + 0x08 /* OTG_SYSCON_2 */, - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, - .enable_reg = SOFT_REQ_REG, - .enable_bit = 4, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = COM_CLK_DIV_CTRL_SEL, - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &set_ext_clk_rate, - .round_rate = &round_ext_clk_rate, - .init = &init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = SWD_CLK_DIV_CTRL_SEL, - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &set_ext_clk_rate, - .round_rate = &round_ext_clk_rate, - .init = &init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc1_ck", - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck, - .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc2_ck", - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck, - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 20, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | ALWAYS_ENABLED, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &select_table_rate, - .round_rate = &round_to_table_rate, -}; - - -static struct clk * onchip_clks[] = { - /* non-ULPD clocks */ - &ck_ref, - &ck_dpll1, - /* CK_GEN1 clocks */ - &ck_dpll1out, - &arm_ck, - &armper_ck, - &arm_gpio_ck, - &armxor_ck, - &armtim_ck, - &armwdt_ck, - &arminth_ck1510, &arminth_ck16xx, - /* CK_GEN2 clocks */ - &dsp_ck, - &dspmmu_ck, - &dspper_ck, - &dspxor_ck, - &dsptim_ck, - /* CK_GEN3 clocks */ - &tc_ck, - &tipb_ck, - &l3_ocpi_ck, - &tc1_ck, - &tc2_ck, - &dma_ck, - &dma_lcdfree_ck, - &api_ck, - &lb_ck, - &rhea1_ck, - &rhea2_ck, - &lcd_ck, - /* ULPD clocks */ - &uart1_1510, - &uart1_16xx, - &uart2_ck, - &uart3_1510, - &uart3_16xx, - &usb_clko, - &usb_hhc_ck1510, &usb_hhc_ck16xx, - &usb_dc_ck, - &mclk_1510, &mclk_16xx, - &bclk_1510, &bclk_16xx, - &mmc1_ck, - &mmc2_ck, - /* Virtual clocks */ - &virtual_ck_mpu, -}; - -struct clk *clk_get(struct device *dev, const char *id) +struct clk * clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); @@ -590,534 +53,200 @@ struct clk *clk_get(struct device *dev, const char *id) } EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - - -int __clk_enable(struct clk *clk) -{ - __u16 regval16; - __u32 regval32; - - if (clk->flags & ALWAYS_ENABLED) - return 0; - - if (unlikely(clk->enable_reg == 0)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_use(&api_ck); - } - - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_unuse(&api_ck); - } - - return 0; -} - - -void __clk_disable(struct clk *clk) -{ - __u16 regval16; - __u32 regval32; - - if (clk->enable_reg == 0) - return; - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_use(&api_ck); - } - - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_unuse(&api_ck); - } -} - - -void __clk_unuse(struct clk *clk) -{ - if (clk->usecount > 0 && !(--clk->usecount)) { - __clk_disable(clk); - if (likely(clk->parent)) - __clk_unuse(clk->parent); - } -} - - -int __clk_use(struct clk *clk) -{ - int ret = 0; - if (clk->usecount++ == 0) { - if (likely(clk->parent)) - ret = __clk_use(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } - - ret = __clk_enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - __clk_unuse(clk->parent); - clk->usecount--; - } - } - - return ret; -} - - int clk_enable(struct clk *clk) { unsigned long flags; - int ret; + int ret = 0; spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); + if (clk->enable) + ret = clk->enable(clk); + else if (arch_clock->clk_enable) + ret = arch_clock->clk_enable(clk); + else + printk(KERN_ERR "Could not enable clock %s\n", clk->name); spin_unlock_irqrestore(&clockfw_lock, flags); + return ret; } EXPORT_SYMBOL(clk_enable); - void clk_disable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); + if (clk->disable) + clk->disable(clk); + else if (arch_clock->clk_disable) + arch_clock->clk_disable(clk); + else + printk(KERN_ERR "Could not disable clock %s\n", clk->name); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); - int clk_use(struct clk *clk) { unsigned long flags; int ret = 0; spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_use(clk); + if (arch_clock->clk_use) + ret = arch_clock->clk_use(clk); spin_unlock_irqrestore(&clockfw_lock, flags); + return ret; } EXPORT_SYMBOL(clk_use); - void clk_unuse(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clockfw_lock, flags); - __clk_unuse(clk); + if (arch_clock->clk_unuse) + arch_clock->clk_unuse(clk); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_unuse); - int clk_get_usecount(struct clk *clk) { - return clk->usecount; -} -EXPORT_SYMBOL(clk_get_usecount); - - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - - -static __u16 verify_ckctl_value(__u16 newval) -{ - /* This function checks for following limitations set - * by the hardware (all conditions must be true): - * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 - * ARM_CK >= TC_CK - * DSP_CK >= TC_CK - * DSPMMU_CK >= TC_CK - * - * In addition following rules are enforced: - * LCD_CK <= TC_CK - * ARMPER_CK <= TC_CK - * - * However, maximum frequencies are not checked for! - */ - __u8 per_exp; - __u8 lcd_exp; - __u8 arm_exp; - __u8 dsp_exp; - __u8 tc_exp; - __u8 dspmmu_exp; - - per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; - lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; - arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; - dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; - tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; - dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; - - if (dspmmu_exp < dsp_exp) - dspmmu_exp = dsp_exp; - if (dspmmu_exp > dsp_exp+1) - dspmmu_exp = dsp_exp+1; - if (tc_exp < arm_exp) - tc_exp = arm_exp; - if (tc_exp < dspmmu_exp) - tc_exp = dspmmu_exp; - if (tc_exp > lcd_exp) - lcd_exp = tc_exp; - if (tc_exp > per_exp) - per_exp = tc_exp; + unsigned long flags; + int ret = 0; - newval &= 0xf000; - newval |= per_exp << CKCTL_PERDIV_OFFSET; - newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; - newval |= arm_exp << CKCTL_ARMDIV_OFFSET; - newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; - newval |= tc_exp << CKCTL_TCDIV_OFFSET; - newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->usecount; + spin_unlock_irqrestore(&clockfw_lock, flags); - return newval; + return ret; } +EXPORT_SYMBOL(clk_get_usecount); - -static int calc_dsor_exp(struct clk *clk, unsigned long rate) +unsigned long clk_get_rate(struct clk *clk) { - /* Note: If target frequency is too low, this function will return 4, - * which is invalid value. Caller must check for this value and act - * accordingly. - * - * Note: This function does not check for following limitations set - * by the hardware (all conditions must be true): - * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 - * ARM_CK >= TC_CK - * DSP_CK >= TC_CK - * DSPMMU_CK >= TC_CK - */ - unsigned long realrate; - struct clk * parent; - unsigned dsor_exp; - - if (unlikely(!(clk->flags & RATE_CKCTL))) - return -EINVAL; - - parent = clk->parent; - if (unlikely(parent == 0)) - return -EIO; - - realrate = parent->rate; - for (dsor_exp=0; dsor_exp<4; dsor_exp++) { - if (realrate <= rate) - break; + unsigned long flags; + unsigned long ret = 0; - realrate /= 2; - } + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); - return dsor_exp; + return ret; } +EXPORT_SYMBOL(clk_get_rate); - -static void ckctl_recalc(struct clk * clk) +void clk_put(struct clk *clk) { - int dsor; - - /* Calculate divisor encoded as 2-bit exponent */ - if (clk->flags & DSP_DOMAIN_CLOCK) { - /* The clock control bits are in DSP domain, - * so api_ck is needed for access. - * Note that DSP_CKCTL virt addr = phys addr, so - * we must use __raw_readw() instead of omap_readw(). - */ - __clk_use(&api_ck); - dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - __clk_unuse(&api_ck); - } else { - dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - } - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + if (clk && !IS_ERR(clk)) + module_put(clk->owner); } +EXPORT_SYMBOL(clk_put); +/*------------------------------------------------------------------------- + * Optional clock functions defined in asm/hardware/clock.h + *-------------------------------------------------------------------------*/ long clk_round_rate(struct clk *clk, unsigned long rate) { - int dsor_exp; - - if (clk->flags & RATE_FIXED) - return clk->rate; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp < 0) - return dsor_exp; - if (dsor_exp > 3) - dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); - } + unsigned long flags; + long ret = 0; - if(clk->round_rate != 0) - return clk->round_rate(clk, rate); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_round_rate) + ret = arch_clock->clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); - return clk->rate; + return ret; } EXPORT_SYMBOL(clk_round_rate); - -static void propagate_rate(struct clk * clk) -{ - struct clk ** clkp; - - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (likely((*clkp)->parent != clk)) continue; - if (likely((*clkp)->recalc)) - (*clkp)->recalc(*clkp); - } -} - - -static int select_table_rate(struct clk * clk, unsigned long rate) +int clk_set_rate(struct clk *clk, unsigned long rate) { - /* Find the highest supported frequency <= rate and switch to it */ - struct mpu_rate * ptr; - - if (clk != &virtual_ck_mpu) - return -EINVAL; - - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) - continue; - - /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) - continue; - - /* Can check only after xtal frequency check */ - if (ptr->rate <= rate) - break; - } - - if (!ptr->rate) - return -EINVAL; + unsigned long flags; + int ret = 0; - /* - * In most cases we should not need to reprogram DPLL. - * Reprogramming the DPLL is tricky, it must be done from SRAM. - */ - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_set_rate) + ret = arch_clock->clk_set_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); - ck_dpll1.rate = ptr->pll_rate; - propagate_rate(&ck_dpll1); - return 0; + return ret; } +EXPORT_SYMBOL(clk_set_rate); - -static long round_to_table_rate(struct clk * clk, unsigned long rate) +int clk_set_parent(struct clk *clk, struct clk *parent) { - /* Find the highest supported frequency <= rate */ - struct mpu_rate * ptr; - long highest_rate; - - if (clk != &virtual_ck_mpu) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) - continue; - - highest_rate = ptr->rate; + unsigned long flags; + int ret = 0; - /* Can check only after xtal frequency check */ - if (ptr->rate <= rate) - break; - } + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_set_parent) + ret = arch_clock->clk_set_parent(clk, parent); + spin_unlock_irqrestore(&clockfw_lock, flags); - return highest_rate; + return ret; } +EXPORT_SYMBOL(clk_set_parent); - -int clk_set_rate(struct clk *clk, unsigned long rate) +struct clk *clk_get_parent(struct clk *clk) { - int ret = -EINVAL; - int dsor_exp; - __u16 regval; - unsigned long flags; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - spin_lock_irqsave(&clockfw_lock, flags); - regval = omap_readw(ARM_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - regval = verify_ckctl_value(regval); - omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - spin_unlock_irqrestore(&clockfw_lock, flags); - ret = 0; - } else if(clk->set_rate != 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->set_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + unsigned long flags; + struct clk * ret = NULL; - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_get_parent) + ret = arch_clock->clk_get_parent(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); return ret; } -EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +/*------------------------------------------------------------------------- + * OMAP specific clock functions shared between omap1 and omap2 + *-------------------------------------------------------------------------*/ -static unsigned calc_ext_dsor(unsigned long rate) -{ - unsigned dsor; +unsigned int __initdata mpurate; - /* MCLK and BCLK divisor selection is not linear: - * freq = 96MHz / dsor - * - * RATIO_SEL range: dsor <-> RATIO_SEL - * 0..6: (RATIO_SEL+2) <-> (dsor-2) - * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) - * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 - * can not be used. - */ - for (dsor = 2; dsor < 96; ++dsor) { - if ((dsor & 1) && dsor > 8) - continue; - if (rate >= 96000000 / dsor) - break; - } - return dsor; -} - -/* Only needed on 1510 */ -static int set_uart_rate(struct clk * clk, unsigned long rate) -{ - unsigned int val; - - val = omap_readl(clk->enable_reg); - if (rate == 12000000) - val &= ~(1 << clk->enable_bit); - else if (rate == 48000000) - val |= (1 << clk->enable_bit); - else - return -EINVAL; - omap_writel(val, clk->enable_reg); - clk->rate = rate; - - return 0; -} - -static int set_ext_clk_rate(struct clk * clk, unsigned long rate) +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) { - unsigned dsor; - __u16 ratio_bits; + get_option(&str, &mpurate); - dsor = calc_ext_dsor(rate); - clk->rate = 96000000 / dsor; - if (dsor > 8) - ratio_bits = ((dsor - 8) / 2 + 6) << 2; - else - ratio_bits = (dsor - 2) << 2; + if (!mpurate) + return 1; - ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; - omap_writew(ratio_bits, clk->enable_reg); + if (mpurate < 1000) + mpurate *= 1000000; - return 0; + return 1; } +__setup("mpurate=", omap_clk_setup); - -static long round_ext_clk_rate(struct clk * clk, unsigned long rate) +/* Used for clocks that always have same value as the parent clock */ +void followparent_recalc(struct clk *clk) { - return 96000000 / calc_ext_dsor(rate); + clk->rate = clk->parent->rate; } - -static void init_ext_clk(struct clk * clk) +/* Propagate rate to children */ +void propagate_rate(struct clk * tclk) { - unsigned dsor; - __u16 ratio_bits; + struct clk *clkp; - /* Determine current rate and ensure clock is based on 96MHz APLL */ - ratio_bits = omap_readw(clk->enable_reg) & ~1; - omap_writew(ratio_bits, clk->enable_reg); - - ratio_bits = (ratio_bits & 0xfc) >> 2; - if (ratio_bits > 6) - dsor = (ratio_bits - 6) * 2 + 8; - else - dsor = ratio_bits + 2; - - clk-> rate = 96000000 / dsor; + list_for_each_entry(clkp, &clocks, node) { + if (likely(clkp->parent != tclk)) + continue; + if (likely((u32)clkp->recalc)) + clkp->recalc(clkp); + } } - int clk_register(struct clk *clk) { down(&clocks_sem); @@ -1125,6 +254,7 @@ int clk_register(struct clk *clk) if (clk->init) clk->init(clk); up(&clocks_sem); + return 0; } EXPORT_SYMBOL(clk_register); @@ -1137,203 +267,38 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap_early_clk_reset(void) +void clk_deny_idle(struct clk *clk) { - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_deny_idle) + arch_clock->clk_deny_idle(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } -#else -#define omap_early_clk_reset() {} -#endif +EXPORT_SYMBOL(clk_deny_idle); -int __init clk_init(void) +void clk_allow_idle(struct clk *clk) { - struct clk ** clkp; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - - omap_early_clk_reset(); - - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { - clk_register(*clkp); - continue; - } - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap1510()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } - propagate_rate(&ck_dpll1); -#else - /* Find the highest supported frequency and enable it */ - if (select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - propagate_rate(&ck_dpll1); - } -#endif - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); -#endif - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_use(&armper_ck); - clk_use(&armxor_ck); - clk_use(&armtim_ck); - - if (cpu_is_omap1510()) - clk_enable(&arm_gpio_ck); + unsigned long flags; - return 0; + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_allow_idle) + arch_clock->clk_allow_idle(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } +EXPORT_SYMBOL(clk_allow_idle); +/*-------------------------------------------------------------------------*/ -#ifdef CONFIG_OMAP_RESET_CLOCKS - -static int __init omap_late_clk_reset(void) +int __init clk_init(struct clk_functions * custom_clocks) { - /* Turn off all unused clocks */ - struct clk *p; - __u32 regval32; - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Assume no DSP clocks have been activated by bootloader */ - if (p->flags & DSP_DOMAIN_CLOCK) - continue; - - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); - else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; - - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } - - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - __clk_disable(p); - printk(" done\n"); + if (!custom_clocks) { + printk(KERN_ERR "No custom clock functions registered\n"); + BUG(); } + arch_clock = custom_clocks; + return 0; } - -late_initcall(omap_late_clk_reset); - -#endif diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h deleted file mode 100644 index a89e1e8c251..00000000000 --- a/arch/arm/plat-omap/clock.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.h - * - * Copyright (C) 2004 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -struct module; - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - struct clk *parent; - unsigned long rate; - __s8 usecount; - __u16 flags; - __u32 enable_reg; - __u8 enable_bit; - __u8 rate_offset; - void (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); -}; - - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; - - -/* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 -#define CLOCK_IN_OMAP16XX 64 -#define CLOCK_IN_OMAP1510 128 -#define CLOCK_IN_OMAP730 256 -#define DSP_DOMAIN_CLOCK 512 -#define VIRTUAL_IO_ADDRESS 1024 - -/* ARM_CKCTL bit shifts */ -#define CKCTL_PERDIV_OFFSET 0 -#define CKCTL_LCDDIV_OFFSET 2 -#define CKCTL_ARMDIV_OFFSET 4 -#define CKCTL_DSPDIV_OFFSET 6 -#define CKCTL_TCDIV_OFFSET 8 -#define CKCTL_DSPMMUDIV_OFFSET 10 -/*#define ARM_TIMXO 12*/ -#define EN_DSPCK 13 -/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ -/* DSP_CKCTL bit shifts */ -#define CKCTL_DSPPERDIV_OFFSET 0 - -/* ARM_IDLECT1 bit shifts */ -/*#define IDLWDT_ARM 0*/ -/*#define IDLXORP_ARM 1*/ -/*#define IDLPER_ARM 2*/ -/*#define IDLLCD_ARM 3*/ -/*#define IDLLB_ARM 4*/ -/*#define IDLHSAB_ARM 5*/ -/*#define IDLIF_ARM 6*/ -/*#define IDLDPLL_ARM 7*/ -/*#define IDLAPI_ARM 8*/ -/*#define IDLTIM_ARM 9*/ -/*#define SETARM_IDLE 11*/ - -/* ARM_IDLECT2 bit shifts */ -#define EN_WDTCK 0 -#define EN_XORPCK 1 -#define EN_PERCK 2 -#define EN_LCDCK 3 -#define EN_LBCK 4 /* Not on 1610/1710 */ -/*#define EN_HSABCK 5*/ -#define EN_APICK 6 -#define EN_TIMCK 7 -#define DMACK_REQ 8 -#define EN_GPIOCK 9 /* Not on 1610/1710 */ -/*#define EN_LBFREECK 10*/ -#define EN_CKOUT_ARM 11 - -/* ARM_IDLECT3 bit shifts */ -#define EN_OCPI_CK 0 -#define EN_TC1_CK 2 -#define EN_TC2_CK 4 - -/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ -#define EN_DSPTIMCK 5 - -/* Various register defines for clock controls scattered around OMAP chip */ -#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ -#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ -#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ -#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ -#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 -#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 -#define SOFT_REQ_REG 0xfffe0834 -#define SOFT_REQ_REG2 0xfffe0880 - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); -int clk_init(void); - -#endif diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 02bcc6c1cd1..ccdb452630c 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -31,7 +31,7 @@ #include <asm/arch/mux.h> #include <asm/arch/fpga.h> -#include "clock.h" +#include <asm/arch/clock.h> #define NO_LENGTH_CHECK 0xffffffff @@ -117,19 +117,43 @@ EXPORT_SYMBOL(omap_get_var_config); static int __init omap_add_serial_console(void) { - const struct omap_serial_console_config *info; - - info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, - struct omap_serial_console_config); - if (info != NULL && info->console_uart) { - static char speed[11], *opt = NULL; + const struct omap_serial_console_config *con_info; + const struct omap_uart_config *uart_info; + static char speed[11], *opt = NULL; + int line, i, uart_idx; + + uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, + struct omap_serial_console_config); + if (uart_info == NULL || con_info == NULL) + return 0; + + if (con_info->console_uart == 0) + return 0; + + if (con_info->console_speed) { + snprintf(speed, sizeof(speed), "%u", con_info->console_speed); + opt = speed; + } - if (info->console_speed) { - snprintf(speed, sizeof(speed), "%u", info->console_speed); - opt = speed; - } - return add_preferred_console("ttyS", info->console_uart - 1, opt); + uart_idx = con_info->console_uart - 1; + if (uart_idx >= OMAP_MAX_NR_PORTS) { + printk(KERN_INFO "Console: external UART#%d. " + "Not adding it as console this time.\n", + uart_idx + 1); + return 0; + } + if (!(uart_info->enabled_uarts & (1 << uart_idx))) { + printk(KERN_ERR "Console: Selected UART#%d is " + "not enabled for this platform\n", + uart_idx + 1); + return -1; + } + line = 0; + for (i = 0; i < uart_idx; i++) { + if (uart_info->enabled_uarts & (1 << i)) + line++; } - return 0; + return add_preferred_console("ttyS", line, opt); } console_initcall(omap_add_serial_console); diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c new file mode 100644 index 00000000000..9dcce904b60 --- /dev/null +++ b/arch/arm/plat-omap/devices.c @@ -0,0 +1,381 @@ +/* + * linux/arch/arm/plat-omap/devices.c + * + * Common platform device setup/initialization for OMAP1 and OMAP2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + + +void omap_nop_release(struct device *dev) +{ + /* Nothing */ +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP2_I2C_BASE1 0x48070000 +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_INT INT_I2C +#define OMAP2_I2C_INT1 56 + +static struct resource i2c_resources1[] = { + { + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM, + }, + { + .start = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +/* DMA not used; works around erratum writing to non-empty i2c fifo */ + +static struct platform_device omap_i2c_device1 = { + .name = "i2c_omap", + .id = 1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources1), + .resource = i2c_resources1, +}; + +/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */ +static void omap_init_i2c(void) +{ + if (cpu_is_omap24xx()) { + i2c_resources1[0].start = OMAP2_I2C_BASE1; + i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE; + i2c_resources1[1].start = OMAP2_I2C_INT1; + } else { + i2c_resources1[0].start = OMAP1_I2C_BASE; + i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE; + i2c_resources1[1].start = OMAP1_I2C_INT; + } + + /* FIXME define and use a boot tag, in case of boards that + * either don't wire up I2C, or chips that mux it differently... + * it can include clocking and address info, maybe more. + */ + if (cpu_is_omap24xx()) { + omap_cfg_reg(M19_24XX_I2C1_SCL); + omap_cfg_reg(L15_24XX_I2C1_SDA); + } else { + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + } + + (void) platform_device_register(&omap_i2c_device1); +} + +#else +static inline void omap_init_i2c(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_MMC1_BASE 0x4809c000 +#define OMAP_MMC1_INT 83 +#else +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC1_INT INT_MMC +#endif +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +static struct omap_mmc_conf mmc1_conf; + +static u64 mmc1_dmamask = 0xffffffff; + +static struct resource mmc1_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC1_BASE), + .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP_MMC1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device1 = { + .name = "mmci-omap", + .id = 1, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc1_dmamask, + .platform_data = &mmc1_conf, + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources, +}; + +#ifdef CONFIG_ARCH_OMAP16XX + +static struct omap_mmc_conf mmc2_conf; + +static u64 mmc2_dmamask = 0xffffffff; + +static struct resource mmc2_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC2_BASE), + .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_MMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device2 = { + .name = "mmci-omap", + .id = 2, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc2_dmamask, + .platform_data = &mmc2_conf, + }, + .num_resources = ARRAY_SIZE(mmc2_resources), + .resource = mmc2_resources, +}; +#endif + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + const struct omap_mmc_conf *mmc; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + /* block 1 is always available and has just one pinout option */ + mmc = &mmc_conf->mmc[0]; + if (mmc->enabled) { + if (!cpu_is_omap24xx()) { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap1710()) { + omap_cfg_reg(M15_1710_MMC_CLKI); + omap_cfg_reg(P19_1710_MMC_CMDDIR); + omap_cfg_reg(P20_1710_MMC_DATDIR0); + } + } + if (mmc->wire4) { + if (!cpu_is_omap24xx()) { + omap_cfg_reg(MMC_DAT1); + /* NOTE: DAT2 can be on W10 (here) or M15 */ + if (!mmc->nomux) + omap_cfg_reg(MMC_DAT2); + omap_cfg_reg(MMC_DAT3); + } + } + mmc1_conf = *mmc; + (void) platform_device_register(&mmc_omap_device1); + } + +#ifdef CONFIG_ARCH_OMAP16XX + /* block 2 is on newer chips, and has many pinout options */ + mmc = &mmc_conf->mmc[1]; + if (mmc->enabled) { + if (!mmc->nomux) { + omap_cfg_reg(Y8_1610_MMC2_CMD); + omap_cfg_reg(Y10_1610_MMC2_CLK); + omap_cfg_reg(R18_1610_MMC2_CLKIN); + omap_cfg_reg(W8_1610_MMC2_DAT0); + if (mmc->wire4) { + omap_cfg_reg(V8_1610_MMC2_DAT1); + omap_cfg_reg(W15_1610_MMC2_DAT2); + omap_cfg_reg(R10_1610_MMC2_DAT3); + } + + /* These are needed for the level shifter */ + omap_cfg_reg(V9_1610_MMC2_CMDDIR); + omap_cfg_reg(V5_1610_MMC2_DATDIR0); + omap_cfg_reg(W19_1610_MMC2_DATDIR1); + } + + /* Feedback clock must be set on OMAP-1710 MMC2 */ + if (cpu_is_omap1710()) + omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), + MOD_CONF_CTRL_1); + mmc2_conf = *mmc; + (void) platform_device_register(&mmc_omap_device2); + } +#endif + return; +} +#else +static inline void omap_init_mmc(void) {} +#endif + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_WDT_BASE 0x48022000 +#else +#define OMAP_WDT_BASE 0xfffeb000 +#endif + +static struct resource wdt_resources[] = { + { + .start = OMAP_WDT_BASE, + .end = OMAP_WDT_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +static struct omap_lcd_config omap_fb_conf; + +static u64 omap_fb_dma_mask = ~(u32)0; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .release = omap_nop_release, + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omap_fb_conf, + }, + .num_resources = 0, +}; + +static inline void omap_init_fb(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf != NULL) + omap_fb_conf = *conf; + platform_device_register(&omap_fb_device); +} + +#else + +static inline void omap_init_fb(void) {} + +#endif + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowlege like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_fb(); + omap_init_i2c(); + omap_init_mmc(); + omap_init_wdt(); + omap_init_rng(); + + return 0; +} +arch_initcall(omap_init_devices); + diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index da7b6514565..f5cc21ad095 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -6,6 +6,8 @@ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak <imre.deak@nokia.com> + * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * * Support functions for the OMAP internal DMA channels. @@ -31,8 +33,15 @@ #include <asm/arch/tc.h> -#define OMAP_DMA_ACTIVE 0x01 +#define DEBUG_PRINTS +#undef DEBUG_PRINTS +#ifdef DEBUG_PRINTS +#define debug_printk(x) printk x +#else +#define debug_printk(x) +#endif +#define OMAP_DMA_ACTIVE 0x01 #define OMAP_DMA_CCR_EN (1 << 7) #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -55,7 +64,7 @@ static int dma_chan_count; static spinlock_t dma_chan_lock; static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT]; -const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { +const static u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3, INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7, INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10, @@ -63,6 +72,20 @@ const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD }; +#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ + __FUNCTION__); + +#ifdef CONFIG_ARCH_OMAP15XX +/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ +int omap_dma_in_1510_mode(void) +{ + return enable_1510_mode; +} +#else +#define omap_dma_in_1510_mode() 0 +#endif + +#ifdef CONFIG_ARCH_OMAP1 static inline int get_gdma_dev(int req) { u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; @@ -82,6 +105,9 @@ static inline void set_gdma_dev(int req, int dev) l |= (dev - 1) << shift; omap_writel(l, reg); } +#else +#define set_gdma_dev(req, dev) do {} while (0) +#endif static void clear_lch_regs(int lch) { @@ -121,38 +147,62 @@ void omap_set_dma_priority(int dst_port, int priority) } void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, - int frame_count, int sync_mode) + int frame_count, int sync_mode, + int dma_trigger, int src_or_dst_synch) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~0x03; + OMAP_DMA_CSDP_REG(lch) |= data_type; - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~0x03; - w |= data_type; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (cpu_class_is_omap1()) { + OMAP_DMA_CCR_REG(lch) &= ~(1 << 5); + if (sync_mode == OMAP_DMA_SYNC_FRAME) + OMAP_DMA_CCR_REG(lch) |= 1 << 5; + + OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2); + if (sync_mode == OMAP_DMA_SYNC_BLOCK) + OMAP1_DMA_CCR2_REG(lch) |= 1 << 2; + } + + if (cpu_is_omap24xx() && dma_trigger) { + u32 val = OMAP_DMA_CCR_REG(lch); + + if (dma_trigger > 63) + val |= 1 << 20; + if (dma_trigger > 31) + val |= 1 << 19; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(1 << 5); - if (sync_mode == OMAP_DMA_SYNC_FRAME) - w |= 1 << 5; - omap_writew(w, OMAP_DMA_CCR(lch)); + val |= (dma_trigger & 0x1f); - w = omap_readw(OMAP_DMA_CCR2(lch)); - w &= ~(1 << 2); - if (sync_mode == OMAP_DMA_SYNC_BLOCK) - w |= 1 << 2; - omap_writew(w, OMAP_DMA_CCR2(lch)); + if (sync_mode & OMAP_DMA_SYNC_FRAME) + val |= 1 << 5; - omap_writew(elem_count, OMAP_DMA_CEN(lch)); - omap_writew(frame_count, OMAP_DMA_CFN(lch)); + if (sync_mode & OMAP_DMA_SYNC_BLOCK) + val |= 1 << 18; + if (src_or_dst_synch) + val |= 1 << 24; /* source synch */ + else + val &= ~(1 << 24); /* dest synch */ + + OMAP_DMA_CCR_REG(lch) = val; + } + + OMAP_DMA_CEN_REG(lch) = elem_count; + OMAP_DMA_CFN_REG(lch) = frame_count; } + void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { u16 w; BUG_ON(omap_dma_in_1510_mode()); - w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03; + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + + w = OMAP1_DMA_CCR2_REG(lch) & ~0x03; switch (mode) { case OMAP_DMA_CONSTANT_FILL: w |= 0x01; @@ -165,63 +215,84 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) default: BUG(); } - omap_writew(w, OMAP_DMA_CCR2(lch)); + OMAP1_DMA_CCR2_REG(lch) = w; - w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f; + w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f; /* Default is channel type 2D */ if (mode) { - omap_writew((u16)color, OMAP_DMA_COLOR_L(lch)); - omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch)); + OMAP1_DMA_COLOR_L_REG(lch) = (u16)color; + OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16); w |= 1; /* Channel type G */ } - omap_writew(w, OMAP_DMA_LCH_CTRL(lch)); + OMAP1_DMA_LCH_CTRL_REG(lch) = w; } - +/* Note that src_port is only for omap1 */ void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start) + unsigned long src_start, + int src_ei, int src_fi) { - u16 w; + if (cpu_class_is_omap1()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2); + OMAP_DMA_CSDP_REG(lch) |= src_port << 2; + } + + OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12); + OMAP_DMA_CCR_REG(lch) |= src_amode << 12; + + if (cpu_class_is_omap1()) { + OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16; + OMAP1_DMA_CSSA_L_REG(lch) = src_start; + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 2); - w |= src_port << 2; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (cpu_is_omap24xx()) + OMAP2_DMA_CSSA_REG(lch) = src_start; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 12); - w |= src_amode << 12; - omap_writew(w, OMAP_DMA_CCR(lch)); + OMAP_DMA_CSEI_REG(lch) = src_ei; + OMAP_DMA_CSFI_REG(lch) = src_fi; +} - omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch)); - omap_writew(src_start, OMAP_DMA_CSSA_L(lch)); +void omap_set_dma_params(int lch, struct omap_dma_channel_params * params) +{ + omap_set_dma_transfer_params(lch, params->data_type, + params->elem_count, params->frame_count, + params->sync_mode, params->trigger, + params->src_or_dst_synch); + omap_set_dma_src_params(lch, params->src_port, + params->src_amode, params->src_start, + params->src_ei, params->src_fi); + + omap_set_dma_dest_params(lch, params->dst_port, + params->dst_amode, params->dst_start, + params->dst_ei, params->dst_fi); } void omap_set_dma_src_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CSEI(lch)); - omap_writew(fidx, OMAP_DMA_CSFI(lch)); + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + OMAP_DMA_CSEI_REG(lch) = eidx; + OMAP_DMA_CSFI_REG(lch) = fidx; } void omap_set_dma_src_data_pack(int lch, int enable) { - u16 w; - - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6); - w |= enable ? (1 << 6) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6); + if (enable) + OMAP_DMA_CSDP_REG(lch) |= (1 << 6); } void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 7); + OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7); break; case OMAP_DMA_DATA_BURST_8: /* not supported by current hardware @@ -231,110 +302,283 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) default: BUG(); } - omap_writew(w, OMAP_DMA_CSDP(lch)); } +/* Note that dest_port is only for OMAP1 */ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start) + unsigned long dest_start, + int dst_ei, int dst_fi) { - u16 w; + if (cpu_class_is_omap1()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9); + OMAP_DMA_CSDP_REG(lch) |= dest_port << 9; + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 9); - w |= dest_port << 9; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14); + OMAP_DMA_CCR_REG(lch) |= dest_amode << 14; + + if (cpu_class_is_omap1()) { + OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16; + OMAP1_DMA_CDSA_L_REG(lch) = dest_start; + } - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 14); - w |= dest_amode << 14; - omap_writew(w, OMAP_DMA_CCR(lch)); + if (cpu_is_omap24xx()) + OMAP2_DMA_CDSA_REG(lch) = dest_start; - omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch)); - omap_writew(dest_start, OMAP_DMA_CDSA_L(lch)); + OMAP_DMA_CDEI_REG(lch) = dst_ei; + OMAP_DMA_CDFI_REG(lch) = dst_fi; } void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CDEI(lch)); - omap_writew(fidx, OMAP_DMA_CDFI(lch)); + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + OMAP_DMA_CDEI_REG(lch) = eidx; + OMAP_DMA_CDFI_REG(lch) = fidx; } void omap_set_dma_dest_data_pack(int lch, int enable) { - u16 w; - - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13); - w |= enable ? (1 << 13) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13); + if (enable) + OMAP_DMA_CSDP_REG(lch) |= 1 << 13; } void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 14); + OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14); break; case OMAP_DMA_DATA_BURST_8: - w |= (0x03 << 14); + OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14); break; default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); return; } - omap_writew(w, OMAP_DMA_CSDP(lch)); } -static inline void init_intr(int lch) +static inline void omap_enable_channel_irq(int lch) { - u16 w; + u32 status; /* Read CSR to make sure it's cleared. */ - w = omap_readw(OMAP_DMA_CSR(lch)); + status = OMAP_DMA_CSR_REG(lch); + /* Enable some nice interrupts. */ - omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch)); + OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs; + dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } -static inline void enable_lnk(int lch) +static void omap_disable_channel_irq(int lch) { - u16 w; + if (cpu_is_omap24xx()) + OMAP_DMA_CICR_REG(lch) = 0; +} + +void omap_enable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs |= bits; +} - /* Clear the STOP_LNK bits */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w &= ~(1 << 14); - omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); +void omap_disable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs &= ~bits; +} + +static inline void enable_lnk(int lch) +{ + if (cpu_class_is_omap1()) + OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14); - /* And set the ENABLE_LNK bits */ + /* Set the ENABLE_LNK bits */ if (dma_chan[lch].next_lch != -1) - omap_writew(dma_chan[lch].next_lch | (1 << 15), - OMAP_DMA_CLNK_CTRL(lch)); + OMAP_DMA_CLNK_CTRL_REG(lch) = + dma_chan[lch].next_lch | (1 << 15); } static inline void disable_lnk(int lch) { - u16 w; - /* Disable interrupts */ - omap_writew(0, OMAP_DMA_CICR(lch)); + if (cpu_class_is_omap1()) { + OMAP_DMA_CICR_REG(lch) = 0; + /* Set the STOP_LNK bit */ + OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14; + } - /* Set the STOP_LNK bit */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w |= (1 << 14); - w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); + if (cpu_is_omap24xx()) { + omap_disable_channel_irq(lch); + /* Clear the ENABLE_LNK bit */ + OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15); + } dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } -void omap_start_dma(int lch) +static inline void omap2_enable_irq_lch(int lch) { - u16 w; + u32 val; + + if (!cpu_is_omap24xx()) + return; + + val = omap_readl(OMAP_DMA4_IRQENABLE_L0); + val |= 1 << lch; + omap_writel(val, OMAP_DMA4_IRQENABLE_L0); +} + +int omap_request_dma(int dev_id, const char *dev_name, + void (* callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch_out) +{ + int ch, free_ch = -1; + unsigned long flags; + struct omap_dma_lch *chan; + + spin_lock_irqsave(&dma_chan_lock, flags); + for (ch = 0; ch < dma_chan_count; ch++) { + if (free_ch == -1 && dma_chan[ch].dev_id == -1) { + free_ch = ch; + if (dev_id == 0) + break; + } + } + if (free_ch == -1) { + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EBUSY; + } + chan = dma_chan + free_ch; + chan->dev_id = dev_id; + + if (cpu_class_is_omap1()) + clear_lch_regs(free_ch); + if (cpu_is_omap24xx()) + omap_clear_dma(free_ch); + + spin_unlock_irqrestore(&dma_chan_lock, flags); + + chan->dev_name = dev_name; + chan->callback = callback; + chan->data = data; + chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | + OMAP_DMA_BLOCK_IRQ; + + if (cpu_is_omap24xx()) + chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ; + + if (cpu_is_omap16xx()) { + /* If the sync device is set, configure it dynamically. */ + if (dev_id != 0) { + set_gdma_dev(free_ch + 1, dev_id); + dev_id = free_ch + 1; + } + /* Disable the 1510 compatibility mode and set the sync device + * id. */ + OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10); + } else if (cpu_is_omap730() || cpu_is_omap15xx()) { + OMAP_DMA_CCR_REG(free_ch) = dev_id; + } + + if (cpu_is_omap24xx()) { + omap2_enable_irq_lch(free_ch); + + omap_enable_channel_irq(free_ch); + /* Clear the CSR register and IRQ status register */ + OMAP_DMA_CSR_REG(free_ch) = 0x0; + omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0); + } + + *dma_ch_out = free_ch; + + return 0; +} + +void omap_free_dma(int lch) +{ + unsigned long flags; + + spin_lock_irqsave(&dma_chan_lock, flags); + if (dma_chan[lch].dev_id == -1) { + printk("omap_dma: trying to free nonallocated DMA channel %d\n", + lch); + spin_unlock_irqrestore(&dma_chan_lock, flags); + return; + } + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); + + if (cpu_class_is_omap1()) { + /* Disable all DMA interrupts for the channel. */ + OMAP_DMA_CICR_REG(lch) = 0; + /* Make sure the DMA transfer is stopped. */ + OMAP_DMA_CCR_REG(lch) = 0; + } + + if (cpu_is_omap24xx()) { + u32 val; + /* Disable interrupts */ + val = omap_readl(OMAP_DMA4_IRQENABLE_L0); + val &= ~(1 << lch); + omap_writel(val, OMAP_DMA4_IRQENABLE_L0); + + /* Clear the CSR register and IRQ status register */ + OMAP_DMA_CSR_REG(lch) = 0x0; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + val |= 1 << lch; + omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + + /* Disable all DMA interrupts for the channel. */ + OMAP_DMA_CICR_REG(lch) = 0; + + /* Make sure the DMA transfer is stopped. */ + OMAP_DMA_CCR_REG(lch) = 0; + omap_clear_dma(lch); + } +} + +/* + * Clears any DMA state so the DMA engine is ready to restart with new buffers + * through omap_start_dma(). Any buffers in flight are discarded. + */ +void omap_clear_dma(int lch) +{ + unsigned long flags; + + local_irq_save(flags); + + if (cpu_class_is_omap1()) { + int status; + OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN; + + /* Clear pending interrupts */ + status = OMAP_DMA_CSR_REG(lch); + } + + if (cpu_is_omap24xx()) { + int i; + u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80; + for (i = 0; i < 0x44; i += 4) + omap_writel(0, lch_base + i); + } + + local_irq_restore(flags); +} + +void omap_start_dma(int lch) +{ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; @@ -348,31 +592,37 @@ void omap_start_dma(int lch) do { next_lch = dma_chan[cur_lch].next_lch; - /* The loop case: we've been here already */ + /* The loop case: we've been here already */ if (dma_chan_link_map[cur_lch]) break; /* Mark the current channel */ dma_chan_link_map[cur_lch] = 1; enable_lnk(cur_lch); - init_intr(cur_lch); + omap_enable_channel_irq(cur_lch); cur_lch = next_lch; } while (next_lch != -1); + } else if (cpu_is_omap24xx()) { + /* Errata: Need to write lch even if not using chaining */ + OMAP_DMA_CLNK_CTRL_REG(lch) = lch; } - init_intr(lch); + omap_enable_channel_irq(lch); + + /* Errata: On ES2.0 BUFFERING disable must be set. + * This will always fail on ES1.0 */ + if (cpu_is_omap24xx()) { + OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN; + } + + OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN; - w = omap_readw(OMAP_DMA_CCR(lch)); - w |= OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } void omap_stop_dma(int lch) { - u16 w; - if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; @@ -393,146 +643,83 @@ void omap_stop_dma(int lch) return; } + /* Disable all interrupts on the channel */ - omap_writew(0, OMAP_DMA_CICR(lch)); + if (cpu_class_is_omap1()) + OMAP_DMA_CICR_REG(lch) = 0; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); + OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN; dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } -void omap_enable_dma_irq(int lch, u16 bits) +/* + * Returns current physical source address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CSSA_L register overflow inbetween the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_src_pos(int lch) { - dma_chan[lch].enabled_irqs |= bits; -} + dma_addr_t offset; -void omap_disable_dma_irq(int lch, u16 bits) -{ - dma_chan[lch].enabled_irqs &= ~bits; -} + if (cpu_class_is_omap1()) + offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) | + (OMAP1_DMA_CSSA_U_REG(lch) << 16)); -static int dma_handle_ch(int ch) -{ - u16 csr; + if (cpu_is_omap24xx()) + offset = OMAP_DMA_CSAC_REG(lch); - if (enable_1510_mode && ch >= 6) { - csr = dma_chan[ch].saved_csr; - dma_chan[ch].saved_csr = 0; - } else - csr = omap_readw(OMAP_DMA_CSR(ch)); - if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { - dma_chan[ch + 6].saved_csr = csr >> 7; - csr &= 0x7f; - } - if ((csr & 0x3f) == 0) - return 0; - if (unlikely(dma_chan[ch].dev_id == -1)) { - printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", - ch, csr); - return 0; - } - if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) - printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id); - if (unlikely(csr & OMAP_DMA_DROP_IRQ)) - printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n", - dma_chan[ch].dev_id); - if (likely(csr & OMAP_DMA_BLOCK_IRQ)) - dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; - if (likely(dma_chan[ch].callback != NULL)) - dma_chan[ch].callback(ch, csr, dma_chan[ch].data); - return 1; + return offset; } -static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +/* + * Returns current physical destination address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CDSA_L register overflow inbetween the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_dst_pos(int lch) { - int ch = ((int) dev_id) - 1; - int handled = 0; + dma_addr_t offset; - for (;;) { - int handled_now = 0; + if (cpu_class_is_omap1()) + offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) | + (OMAP1_DMA_CDSA_U_REG(lch) << 16)); - handled_now += dma_handle_ch(ch); - if (enable_1510_mode && dma_chan[ch + 6].saved_csr) - handled_now += dma_handle_ch(ch + 6); - if (!handled_now) - break; - handled += handled_now; - } + if (cpu_is_omap24xx()) + offset = OMAP2_DMA_CDSA_REG(lch); - return handled ? IRQ_HANDLED : IRQ_NONE; + return offset; } -int omap_request_dma(int dev_id, const char *dev_name, - void (* callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch_out) +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) { - int ch, free_ch = -1; - unsigned long flags; - struct omap_dma_lch *chan; - - spin_lock_irqsave(&dma_chan_lock, flags); - for (ch = 0; ch < dma_chan_count; ch++) { - if (free_ch == -1 && dma_chan[ch].dev_id == -1) { - free_ch = ch; - if (dev_id == 0) - break; - } - } - if (free_ch == -1) { - spin_unlock_irqrestore(&dma_chan_lock, flags); - return -EBUSY; - } - chan = dma_chan + free_ch; - chan->dev_id = dev_id; - clear_lch_regs(free_ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - - chan->dev_id = dev_id; - chan->dev_name = dev_name; - chan->callback = callback; - chan->data = data; - chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - - if (cpu_is_omap16xx()) { - /* If the sync device is set, configure it dynamically. */ - if (dev_id != 0) { - set_gdma_dev(free_ch + 1, dev_id); - dev_id = free_ch + 1; - } - /* Disable the 1510 compatibility mode and set the sync device - * id. */ - omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch)); - } else { - omap_writew(dev_id, OMAP_DMA_CCR(free_ch)); - } - *dma_ch_out = free_ch; - - return 0; + return (dma_addr_t) OMAP_DMA_CSAC_REG(lch); } -void omap_free_dma(int ch) +int omap_dma_running(void) { - unsigned long flags; + int lch; - spin_lock_irqsave(&dma_chan_lock, flags); - if (dma_chan[ch].dev_id == -1) { - printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - return; - } - dma_chan[ch].dev_id = -1; - spin_unlock_irqrestore(&dma_chan_lock, flags); + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; - /* Disable all DMA interrupts for the channel. */ - omap_writew(0, OMAP_DMA_CICR(ch)); - /* Make sure the DMA transfer is stopped. */ - omap_writew(0, OMAP_DMA_CCR(ch)); -} + for (lch = 0; lch < dma_chan_count; lch++) + if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN) + return 1; -int omap_dma_in_1510_mode(void) -{ - return enable_1510_mode; + return 0; } /* @@ -550,7 +737,8 @@ void omap_dma_link_lch (int lch_head, int lch_queue) if ((dma_chan[lch_head].dev_id == -1) || (dma_chan[lch_queue].dev_id == -1)) { - printk(KERN_ERR "omap_dma: trying to link non requested channels\n"); + printk(KERN_ERR "omap_dma: trying to link " + "non requested channels\n"); dump_stack(); } @@ -570,20 +758,149 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue) if (dma_chan[lch_head].next_lch != lch_queue || dma_chan[lch_head].next_lch == -1) { - printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n"); + printk(KERN_ERR "omap_dma: trying to unlink " + "non linked channels\n"); dump_stack(); } if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) { - printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n"); + printk(KERN_ERR "omap_dma: You need to stop the DMA channels " + "before unlinking\n"); dump_stack(); } dma_chan[lch_head].next_lch = -1; } +/*----------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP1 + +static int omap1_dma_handle_ch(int ch) +{ + u16 csr; + + if (enable_1510_mode && ch >= 6) { + csr = dma_chan[ch].saved_csr; + dma_chan[ch].saved_csr = 0; + } else + csr = OMAP_DMA_CSR_REG(ch); + if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { + dma_chan[ch + 6].saved_csr = csr >> 7; + csr &= 0x7f; + } + if ((csr & 0x3f) == 0) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) { + printk(KERN_WARNING "Spurious interrupt from DMA channel " + "%d (CSR %04x)\n", ch, csr); + return 0; + } + if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) + printk(KERN_WARNING "DMA timeout with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(csr & OMAP_DMA_DROP_IRQ)) + printk(KERN_WARNING "DMA synchronization event drop occurred " + "with device %d\n", dma_chan[ch].dev_id); + if (likely(csr & OMAP_DMA_BLOCK_IRQ)) + dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, csr, dma_chan[ch].data); + return 1; +} + +static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + int ch = ((int) dev_id) - 1; + int handled = 0; + + for (;;) { + int handled_now = 0; + + handled_now += omap1_dma_handle_ch(ch); + if (enable_1510_mode && dma_chan[ch + 6].saved_csr) + handled_now += omap1_dma_handle_ch(ch + 6); + if (!handled_now) + break; + handled += handled_now; + } + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +#else +#define omap1_dma_irq_handler NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2 + +static int omap2_dma_handle_ch(int ch) +{ + u32 status = OMAP_DMA_CSR_REG(ch); + u32 val; + + if (!status) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) + return 0; + /* REVISIT: According to 24xx TRM, there's no TOUT_IE */ + if (unlikely(status & OMAP_DMA_TOUT_IRQ)) + printk(KERN_INFO "DMA timeout with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(status & OMAP_DMA_DROP_IRQ)) + printk(KERN_INFO + "DMA synchronization event drop occurred with device " + "%d\n", dma_chan[ch].dev_id); + + if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) + printk(KERN_INFO "DMA transaction error with device %d\n", + dma_chan[ch].dev_id); + + OMAP_DMA_CSR_REG(ch) = 0x20; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + /* ch in this function is from 0-31 while in register it is 1-32 */ + val = 1 << (ch); + omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, status, dma_chan[ch].data); + + return 0; +} + +/* STATUS register count is from 1-32 while our is 0-31 */ +static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + u32 val; + int i; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + + for (i = 1; i <= OMAP_LOGICAL_DMA_CH_COUNT; i++) { + int active = val & (1 << (i - 1)); + if (active) + omap2_dma_handle_ch(i - 1); + } + + return IRQ_HANDLED; +} + +static struct irqaction omap24xx_dma_irq = { + .name = "DMA", + .handler = omap2_dma_irq_handler, + .flags = SA_INTERRUPT +}; + +#else +static struct irqaction omap24xx_dma_irq; +#endif + +/*----------------------------------------------------------------------------*/ static struct lcd_dma_info { spinlock_t lock; @@ -795,7 +1112,7 @@ static void set_b1_regs(void) /* Always set the source port as SDRAM for now*/ w &= ~(0x03 << 6); if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ + w |= 1 << 1; /* Block interrupt enable */ else w &= ~(1 << 1); omap_writew(w, OMAP1610_DMA_LCD_CTRL); @@ -814,7 +1131,8 @@ static void set_b1_regs(void) omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); } -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) { u16 w; @@ -870,7 +1188,8 @@ void omap_free_lcd_dma(void) return; } if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; spin_unlock(&lcd_dma.lock); } @@ -939,93 +1258,24 @@ void omap_stop_lcd_dma(void) omap_writew(w, OMAP1610_DMA_LCD_CTRL); } -/* - * Clears any DMA state so the DMA engine is ready to restart with new buffers - * through omap_start_dma(). Any buffers in flight are discarded. - */ -void omap_clear_dma(int lch) -{ - unsigned long flags; - int status; - - local_irq_save(flags); - omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN, - OMAP_DMA_CCR(lch)); - status = OMAP_DMA_CSR(lch); /* clear pending interrupts */ - local_irq_restore(flags); -} - -/* - * Returns current physical source address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_src_pos(int lch) -{ - return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | - (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); -} - -/* - * Returns current physical destination address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_dst_pos(int lch) -{ - return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | - (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); -} - -/* - * Returns current source transfer counting for the given DMA channel. - * Can be used to monitor the progress of a transfer inside a block. - * It must be called with disabled interrupts. - */ -int omap_get_dma_src_addr_counter(int lch) -{ - return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); -} - -int omap_dma_running(void) -{ - int lch; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) - return 1; - - for (lch = 0; lch < dma_chan_count; lch++) { - u16 w; - - w = omap_readw(OMAP_DMA_CCR(lch)); - if (w & OMAP_DMA_CCR_EN) - return 1; - } - return 0; -} +/*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) { int ch, r; - if (cpu_is_omap1510()) { - printk(KERN_INFO "DMA support for OMAP1510 initialized\n"); + if (cpu_is_omap15xx()) { + printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); dma_chan_count = 9; enable_1510_mode = 1; } else if (cpu_is_omap16xx() || cpu_is_omap730()) { printk(KERN_INFO "OMAP DMA hardware version %d\n", omap_readw(OMAP_DMA_HW_ID)); printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", - (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L), - (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L), + (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | + omap_readw(OMAP_DMA_CAPS_0_L), + (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | + omap_readw(OMAP_DMA_CAPS_1_L), omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3), omap_readw(OMAP_DMA_CAPS_4)); if (!enable_1510_mode) { @@ -1038,6 +1288,11 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; + } else if (cpu_is_omap24xx()) { + u8 revision = omap_readb(OMAP_DMA4_REVISION); + printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", + revision >> 4, revision & 0xf); + dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT; } else { dma_chan_count = 0; return 0; @@ -1049,41 +1304,56 @@ static int __init omap_init_dma(void) memset(&dma_chan, 0, sizeof(dma_chan)); for (ch = 0; ch < dma_chan_count; ch++) { + omap_clear_dma(ch); dma_chan[ch].dev_id = -1; dma_chan[ch].next_lch = -1; if (ch >= 6 && enable_1510_mode) continue; - /* request_irq() doesn't like dev_id (ie. ch) being zero, - * so we have to kludge around this. */ - r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA", - (void *) (ch + 1)); + if (cpu_class_is_omap1()) { + /* request_irq() doesn't like dev_id (ie. ch) being + * zero, so we have to kludge around this. */ + r = request_irq(omap1_dma_irq[ch], + omap1_dma_irq_handler, 0, "DMA", + (void *) (ch + 1)); + if (r != 0) { + int i; + + printk(KERN_ERR "unable to request IRQ %d " + "for DMA (error %d)\n", + omap1_dma_irq[ch], r); + for (i = 0; i < ch; i++) + free_irq(omap1_dma_irq[i], + (void *) (i + 1)); + return r; + } + } + } + + if (cpu_is_omap24xx()) + setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); + + /* FIXME: Update LCD DMA to work on 24xx */ + if (cpu_class_is_omap1()) { + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); if (r != 0) { int i; - printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n", - dma_irq[ch], r); - for (i = 0; i < ch; i++) - free_irq(dma_irq[i], (void *) (i + 1)); + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + for (i = 0; i < dma_chan_count; i++) + free_irq(omap1_dma_irq[i], (void *) (i + 1)); return r; } } - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL); - if (r != 0) { - int i; - printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(dma_irq[i], (void *) (i + 1)); - return r; - } return 0; } arch_initcall(omap_init_dma); - EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); EXPORT_SYMBOL(omap_get_dma_src_addr_counter); @@ -1109,6 +1379,8 @@ EXPORT_SYMBOL(omap_set_dma_dest_index); EXPORT_SYMBOL(omap_set_dma_dest_data_pack); EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); +EXPORT_SYMBOL(omap_set_dma_params); + EXPORT_SYMBOL(omap_dma_link_lch); EXPORT_SYMBOL(omap_dma_unlink_lch); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 55059a24ad4..76f721d8513 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -140,7 +140,7 @@ static struct gpio_bank gpio_bank_1610[5] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } @@ -173,7 +173,7 @@ static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; @@ -222,7 +222,7 @@ static inline int gpio_valid(int gpio) return -1; return 0; } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510() && gpio < 16) return 0; #endif @@ -654,7 +654,7 @@ int omap_request_gpio(int gpio) /* Set trigger to none. You need to enable the trigger after request_irq */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { void __iomem *reg; @@ -739,7 +739,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, bank = (struct gpio_bank *) desc->data; if (bank->method == METHOD_MPUIO) isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; #endif @@ -774,7 +774,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + gpio_irq; desc_handle_irq(gpio_irq, d, regs); } - } + } } static void gpio_ack_irq(unsigned int irq) @@ -837,8 +837,9 @@ static struct irqchip mpuio_irq_chip = { .unmask = mpuio_unmask_irq }; -static int initialized = 0; -static struct clk * gpio_ck = NULL; +static int initialized; +static struct clk * gpio_ick; +static struct clk * gpio_fck; static int __init _omap_gpio_init(void) { @@ -848,14 +849,26 @@ static int __init _omap_gpio_init(void) initialized = 1; if (cpu_is_omap1510()) { - gpio_ck = clk_get(NULL, "arm_gpio_ck"); - if (IS_ERR(gpio_ck)) + gpio_ick = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ick)) printk("Could not get arm_gpio_ck\n"); else - clk_use(gpio_ck); + clk_use(gpio_ick); + } + if (cpu_is_omap24xx()) { + gpio_ick = clk_get(NULL, "gpios_ick"); + if (IS_ERR(gpio_ick)) + printk("Could not get gpios_ick\n"); + else + clk_use(gpio_ick); + gpio_fck = clk_get(NULL, "gpios_fck"); + if (IS_ERR(gpio_ick)) + printk("Could not get gpios_fck\n"); + else + clk_use(gpio_fck); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; @@ -901,7 +914,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_MPUIO) { omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); @@ -1038,6 +1051,7 @@ static struct sys_device omap_gpio_device = { /* * This may get called early from board specific init + * for boards that have interrupts routed via FPGA. */ int omap_gpio_init(void) { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 9c9b7df3faf..ea9475c8665 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -491,17 +491,20 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT); + OMAP_DMA_SYNC_ELEMENT, + 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1); + mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, + 0, 0); omap_set_dma_src_params(mcbsp[id].dma_tx_lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, - buffer); + buffer, + 0, 0); omap_start_dma(mcbsp[id].dma_tx_lch); wait_for_completion(&(mcbsp[id].tx_dma_completion)); @@ -531,17 +534,20 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT); + OMAP_DMA_SYNC_ELEMENT, + 0, 0); omap_set_dma_src_params(mcbsp[id].dma_rx_lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1); + mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, + 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, - buffer); + buffer, + 0, 0); omap_start_dma(mcbsp[id].dma_rx_lch); wait_for_completion(&(mcbsp[id].rx_dma_completion)); @@ -643,7 +649,7 @@ static const struct omap_mcbsp_info mcbsp_730[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static const struct omap_mcbsp_info mcbsp_1510[] = { [0] = { .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, @@ -712,7 +718,7 @@ static int __init omap_mcbsp_init(void) mcbsp_count = ARRAY_SIZE(mcbsp_730); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { mcbsp_info = mcbsp_1510; mcbsp_count = ARRAY_SIZE(mcbsp_1510); diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 64482040f89..8c1c016aa68 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -3,7 +3,7 @@ * * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003 - 2005 Nokia Corporation * * Written by Tony Lindgren <tony.lindgren@nokia.com> * @@ -25,38 +25,74 @@ #include <linux/config.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/kernel.h> #include <asm/system.h> #include <asm/io.h> #include <linux/spinlock.h> - -#define __MUX_C__ #include <asm/arch/mux.h> #ifdef CONFIG_OMAP_MUX +#define OMAP24XX_L4_BASE 0x48000000 +#define OMAP24XX_PULL_ENA (1 << 3) +#define OMAP24XX_PULL_UP (1 << 4) + +static struct pin_config * pin_table; +static unsigned long pin_table_sz; + +extern struct pin_config * omap730_pins; +extern struct pin_config * omap1xxx_pins; +extern struct pin_config * omap24xx_pins; + +int __init omap_mux_register(struct pin_config * pins, unsigned long size) +{ + pin_table = pins; + pin_table_sz = size; + + return 0; +} + /* * Sets the Omap MUX and PULL_DWN registers based on the table */ -int __init_or_module -omap_cfg_reg(const reg_cfg_t reg_cfg) +int __init_or_module omap_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); unsigned long flags; - reg_cfg_set *cfg; + struct pin_config *cfg; unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0, pull_orig = 0, pull = 0; unsigned int mask, warn = 0; - if (cpu_is_omap7xx()) - return 0; + if (!pin_table) + BUG(); - if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { - printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); - return -EINVAL; + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; } - cfg = (reg_cfg_set *)®_cfg_table[reg_cfg]; + cfg = (struct pin_config *)&pin_table[index]; + if (cpu_is_omap24xx()) { + u8 reg = 0; + + reg |= cfg->mask & 0x7; + if (cfg->pull_val) + reg |= OMAP24XX_PULL_ENA; + if(cfg->pu_pd_val) + reg |= OMAP24XX_PULL_UP; +#ifdef CONFIG_OMAP_MUX_DEBUG + printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n", + cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg, + omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg); +#endif + omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg); + + return 0; + } /* Check the mux register in question */ if (cfg->mux_reg) { @@ -157,7 +193,8 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) return 0; #endif } - EXPORT_SYMBOL(omap_cfg_reg); - +#else +#define omap_mux_init() do {} while(0) +#define omap_cfg_reg(x) do {} while(0) #endif /* CONFIG_OMAP_MUX */ diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 1fb16f9edfd..2ede2ee8cae 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,7 +25,6 @@ #include <linux/config.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e15c6c1ddec..966cca031ca 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -54,11 +54,12 @@ #include <asm/arch/tps65010.h> #include <asm/arch/dsp_common.h> -#include "clock.h" -#include "sram.h" +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; +static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -120,8 +121,8 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); - u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); + u32 level1_wake = 0; + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); /* * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, @@ -129,19 +130,29 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap1510() || cpu_is_omap16xx()) - level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); - else if (cpu_is_omap730()) - level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); + if (cpu_is_omap730()) + level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_730_IH2_IRQ); + else if (cpu_is_omap1510()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1610_IH2_IRQ); omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) + if (cpu_is_omap730()) { + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); + } else if (cpu_is_omap1510()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_MIR); - - /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ - if (cpu_is_omap16xx()) { + } else if (cpu_is_omap16xx()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_0_MIR); + + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); @@ -185,7 +196,17 @@ void omap_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_SAVE(OMAP_IH1_MIR); + MPUI730_SAVE(OMAP_IH2_0_MIR); + MPUI730_SAVE(OMAP_IH2_1_MIR); + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + + } else if (cpu_is_omap1510()) { MPUI1510_SAVE(OMAP_IH1_MIR); MPUI1510_SAVE(OMAP_IH2_MIR); MPUI1510_SAVE(MPUI_CTRL); @@ -280,7 +301,13 @@ void omap_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_RESTORE(EMIFS_CONFIG); + MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI730_RESTORE(OMAP_IH1_MIR); + MPUI730_RESTORE(OMAP_IH2_0_MIR); + MPUI730_RESTORE(OMAP_IH2_1_MIR); + } else if (cpu_is_omap1510()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); @@ -355,7 +382,14 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_STATUS); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + } else if (cpu_is_omap1510()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -404,7 +438,21 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI730_CTRL_REG 0x%-8x \n" + "MPUI730_DSP_STATUS_REG: 0x%-8x \n" + "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI730_SHOW(MPUI_CTRL), + MPUI730_SHOW(MPUI_DSP_STATUS), + MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI730_SHOW(MPUI_DSP_API_CONFIG), + MPUI730_SHOW(EMIFF_SDRAM_CONFIG), + MPUI730_SHOW(EMIFS_CONFIG)); + } else if (cpu_is_omap1510()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" @@ -553,7 +601,12 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, + omap730_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, + omap730_cpu_suspend_sz); + } else if (cpu_is_omap1510()) { omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, omap1510_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, @@ -572,7 +625,11 @@ static int __init omap_pm_init(void) pm_idle = omap_pm_idle; - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + if (cpu_is_omap730()) + setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + else if (cpu_is_omap16xx()) + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + #if 0 /* --- BEGIN BOARD-DEPENDENT CODE --- */ /* Sleepx mask direction */ @@ -591,7 +648,9 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap16xx()) + if (cpu_is_omap730()) + omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); pm_set_ops(&omap_pm_ops); @@ -600,8 +659,10 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + if (cpu_is_omap16xx()) { + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + } return 0; } diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 9f745836f6a..4cd7d292f85 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/plat-omap/sleep.S * - * Low-level OMAP1510/1610 sleep/wakeUp support + * Low-level OMAP730/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> @@ -52,7 +52,57 @@ * processor specific functions here. */ -#ifdef CONFIG_ARCH_OMAP1510 +#if defined(CONFIG_ARCH_OMAP730) +ENTRY(omap730_idle_loop_suspend) + + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 + + @ turn off clock domains + @ get ARM_IDLECT2 into r2 + ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle + @ get ARM_IDLECT1 into r1 + ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + mov r5, #IDLE_WAIT_CYCLES & 0xff + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 +l_730: subs r5, r5, #1 + bne l_730 +/* + * Let's wait for the next clock tick to wake us up. + */ + mov r0, #0 + mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt +/* + * omap730_idle_loop_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. + */ + + @ restore ARM_IDLECT1 and ARM_IDLECT2 and return + @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 + strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + +ENTRY(omap730_idle_loop_suspend_sz) + .word . - omap730_idle_loop_suspend +#endif /* CONFIG_ARCH_OMAP730 */ + +#ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_idle_loop_suspend) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -100,7 +150,7 @@ l_1510: subs r5, r5, #1 ENTRY(omap1510_idle_loop_suspend_sz) .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) ENTRY(omap1610_idle_loop_suspend) @@ -169,7 +219,86 @@ ENTRY(omap1610_idle_loop_suspend_sz) * */ -#ifdef CONFIG_ARCH_OMAP1510 +#if defined(CONFIG_ARCH_OMAP730) +ENTRY(omap730_cpu_suspend) + + @ save registers on stack + stmfd sp!, {r0 - r12, lr} + + @ Drain write cache + mov r4, #0 + mcr p15, 0, r0, c7, c10, 4 + nop + + @ load base address of Traffic Controller + mov r6, #TCMIF_ASM_BASE & 0xff000000 + orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 + orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 + + @ prepare to put SDRAM into self-refresh manually + ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 + orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff + str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + + @ prepare to put EMIFS to Sleep + ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff + str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + + @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 + + @ turn off clock domains + @ do not disable PERCK (0x04) + mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle + mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ disable instruction cache + mrc p15, 0, r9, c1, c0, 0 + bic r2, r9, #0x1000 + mcr p15, 0, r2, c1, c0, 0 + nop + +/* + * Let's wait for the next wake up event to wake us up. r0 can't be + * used here because r0 holds ARM_IDLECT1 + */ + mov r2, #0 + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt +/* + * omap730_cpu_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack. + */ + @ re-enable Icache + mcr p15, 0, r9, c1, c0, 0 + + @ reset the ARM_IDLECT1 and ARM_IDLECT2. + strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ Restore EMIFF controls + str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + + @ restore regs and return + ldmfd sp!, {r0 - r12, pc} + +ENTRY(omap730_cpu_suspend_sz) + .word . - omap730_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 */ + +#ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) @ save registers on stack @@ -241,7 +370,7 @@ l_1510_2: ENTRY(omap1510_cpu_suspend_sz) .word . - omap1510_cpu_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) ENTRY(omap1610_cpu_suspend) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 7ad69f14a3e..792f6637583 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,10 +20,13 @@ #include <asm/io.h> #include <asm/cacheflush.h> -#include "sram.h" +#include <asm/arch/sram.h> + +#define OMAP1_SRAM_PA 0x20000000 +#define OMAP1_SRAM_VA 0xd0000000 +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP2_SRAM_VA 0xd0000000 -#define OMAP1_SRAM_BASE 0xd0000000 -#define OMAP1_SRAM_START 0x20000000 #define SRAM_BOOTLOADER_SZ 0x80 static unsigned long omap_sram_base; @@ -31,37 +34,40 @@ static unsigned long omap_sram_size; static unsigned long omap_sram_ceil; /* - * The amount of SRAM depends on the core type: - * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * The amount of SRAM depends on the core type. * Note that we cannot try to test for SRAM here because writes * to secure SRAM will hang the system. Also the SRAM is not * yet mapped at this point. */ void __init omap_detect_sram(void) { - omap_sram_base = OMAP1_SRAM_BASE; + if (!cpu_is_omap24xx()) + omap_sram_base = OMAP1_SRAM_VA; + else + omap_sram_base = OMAP2_SRAM_VA; if (cpu_is_omap730()) - omap_sram_size = 0x32000; - else if (cpu_is_omap1510()) - omap_sram_size = 0x80000; + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; + omap_sram_size = 0x4000; /* 16K */ else if (cpu_is_omap1611()) - omap_sram_size = 0x3e800; + omap_sram_size = 0x3e800; /* 250K */ + else if (cpu_is_omap2420()) + omap_sram_size = 0xa0014; /* 640K */ else { printk(KERN_ERR "Could not detect SRAM size\n"); omap_sram_size = 0x4000; } - printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); omap_sram_ceil = omap_sram_base + omap_sram_size; } static struct map_desc omap_sram_io_desc[] __initdata = { { /* .length gets filled in at runtime */ - .virtual = OMAP1_SRAM_BASE, - .pfn = __phys_to_pfn(OMAP1_SRAM_START), + .virtual = OMAP1_SRAM_VA, + .pfn = __phys_to_pfn(OMAP1_SRAM_PA), .type = MT_DEVICE } }; @@ -76,10 +82,19 @@ void __init omap_map_sram(void) if (omap_sram_size == 0) return; + if (cpu_is_omap24xx()) { + omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; + omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA); + } + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; omap_sram_io_desc[0].length *= PAGE_SIZE; iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", + omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual, + omap_sram_io_desc[0].length); + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... @@ -88,16 +103,6 @@ void __init omap_map_sram(void) omap_sram_size - SRAM_BOOTLOADER_SZ); } -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - if (_omap_sram_reprogram_clock == NULL) - panic("Cannot use SRAM"); - - return _omap_sram_reprogram_clock(dpllctl, ckctl); -} - void * omap_sram_push(void * start, unsigned long size) { if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { @@ -111,10 +116,94 @@ void * omap_sram_push(void * start, unsigned long size) return (void *)omap_sram_ceil; } -void __init omap_sram_init(void) +static void omap_sram_error(void) +{ + panic("Uninitialized SRAM function\n"); +} + +#ifdef CONFIG_ARCH_OMAP1 + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (!_omap_sram_reprogram_clock) + omap_sram_error(); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap1_sram_init(void) { - omap_detect_sram(); - omap_map_sram(); _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, sram_reprogram_clock_sz); + + return 0; +} + +#else +#define omap1_sram_init() do {} while (0) +#endif + +#ifdef CONFIG_ARCH_OMAP2 + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + if (!_omap2_sram_ddr_init) + omap_sram_error(); + + return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + if (!_omap2_sram_reprogram_sdrc) + omap_sram_error(); + + return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + if (!_omap2_set_prcm) + omap_sram_error(); + + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +int __init omap2_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc, + sram_reprogram_sdrc_sz); + _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz); + + return 0; +} +#else +#define omap2_sram_init() do {} while (0) +#endif + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + + if (!cpu_is_omap24xx()) + omap1_sram_init(); + else + omap2_sram_init(); + + return 0; } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 71984efa6ae..00000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/arch/arm/plat-omap/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -extern void * omap_sram_push(void * start, unsigned long size); -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -/* Do not use these */ -extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long sram_reprogram_clock_sz; - -#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 205e2d0b826..00afc7a8c2a 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -91,6 +91,8 @@ EXPORT_SYMBOL(otg_set_transceiver); /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX) + static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -271,6 +273,8 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) return syscon1 << 24; } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_USB_GADGET_OMAP) || \ @@ -494,7 +498,7 @@ static inline void omap_otg_init(struct omap_usb_config *config) {} /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX #define ULPD_DPLL_CTRL_REG __REG16(ULPD_DPLL_CTRL) #define DPLL_IOB (1 << 13) @@ -507,7 +511,6 @@ static inline void omap_otg_init(struct omap_usb_config *config) {} static void __init omap_1510_usb_init(struct omap_usb_config *config) { - int status; unsigned int val; omap_usb0_init(config->pins[0], is_usb0_device(config)); @@ -539,6 +542,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) #ifdef CONFIG_USB_GADGET_OMAP if (config->register_dev) { + int status; + udc_device.dev.platform_data = config; status = platform_device_register(&udc_device); if (status) @@ -549,6 +554,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) if (config->register_host) { + int status; + ohci_device.dev.platform_data = config; status = platform_device_register(&ohci_device); if (status) diff --git a/arch/arm26/kernel/process.c b/arch/arm26/kernel/process.c index 9eb9964d32a..15833a0057d 100644 --- a/arch/arm26/kernel/process.c +++ b/arch/arm26/kernel/process.c @@ -74,15 +74,13 @@ __setup("hlt", hlt_setup); void cpu_idle(void) { /* endless idle loop with no priority at all */ - preempt_disable(); while (1) { - while (!need_resched()) { - local_irq_disable(); - if (!need_resched() && !hlt_counter) - local_irq_enable(); - } + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); } - schedule(); } static char reboot_mode = 'h'; diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 201f4c90d96..f2c55742e90 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -19,7 +19,6 @@ */ #include <linux/config.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 094ff45ae85..cac05a5e514 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -112,7 +112,6 @@ #include <asm/rtc.h> #include <linux/config.h> -#include <linux/version.h> #include <asm/arch/svinto.h> #include <asm/fasttimer.h> diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c index fc2a619b035..93ddea4d956 100644 --- a/arch/cris/arch-v32/drivers/nandflash.c +++ b/arch/cris/arch-v32/drivers/nandflash.c @@ -14,7 +14,6 @@ * */ -#include <linux/version.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/module.h> diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index f894580b648..d788bda3578 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -18,7 +18,6 @@ */ #include <linux/config.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 957f551ba5c..13867f4fad1 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -161,6 +161,7 @@ void __init smp_callin(void) REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask); unmask_irq(IPI_INTR_VECT); unmask_irq(TIMER_INTR_VECT); + preempt_disable(); local_irq_enable(); cpu_set(cpu, cpu_online_map); diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 949a0e40e03..7c80afb1046 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -218,7 +218,9 @@ void cpu_idle (void) idle = default_idle; idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 3001b82b151..54a452136f0 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -77,16 +77,20 @@ void (*idle)(void) = core_sleep_idle; */ void cpu_idle(void) { + int cpu = smp_processor_id(); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { - irq_stat[smp_processor_id()].idle_timestamp = jiffies; + irq_stat[cpu].idle_timestamp = jiffies; if (!frv_dma_inprogress && idle) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 27f1fce64ce..fe21adf3e75 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -53,22 +53,18 @@ asmlinkage void ret_from_fork(void); #if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM) void default_idle(void) { - while(1) { - if (!need_resched()) { - local_irq_enable(); - __asm__("sleep"); - local_irq_disable(); - } - schedule(); - } + local_irq_disable(); + if (!need_resched()) { + local_irq_enable(); + /* XXX: race here! What if need_resched() gets set now? */ + __asm__("sleep"); + } else + local_irq_enable(); } #else void default_idle(void) { - while(1) { - if (need_resched()) - schedule(); - } + cpu_relax(); } #endif void (*idle)(void) = default_idle; @@ -81,7 +77,13 @@ void (*idle)(void) = default_idle; */ void cpu_idle(void) { - idle(); + while (1) { + while (!need_resched()) + idle(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void machine_restart(char * __unused) diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 86e80c55147..003548b8735 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -769,8 +769,26 @@ static int set_system_power_state(u_short state) static int apm_do_idle(void) { u32 eax; + u8 ret = 0; + int idled = 0; + int polling; + + polling = test_thread_flag(TIF_POLLING_NRFLAG); + if (polling) { + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + } + if (!need_resched()) { + idled = 1; + ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); + } + if (polling) + set_thread_flag(TIF_POLLING_NRFLAG); + + if (!idled) + return 0; - if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) { + if (ret) { static unsigned long t; /* This always fails on some SMP boards running UP kernels. diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 7a14fdfd3af..1cb261f225d 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -99,14 +99,22 @@ EXPORT_SYMBOL(enable_hlt); */ void default_idle(void) { + local_irq_enable(); + if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - else - local_irq_enable(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + while (!need_resched()) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + else + local_irq_enable(); + } + set_thread_flag(TIF_POLLING_NRFLAG); } else { - cpu_relax(); + while (!need_resched()) + cpu_relax(); } } #ifdef CONFIG_APM_MODULE @@ -120,29 +128,14 @@ EXPORT_SYMBOL(default_idle); */ static void poll_idle (void) { - int oldval; - local_irq_enable(); - /* - * Deal with another CPU just having chosen a thread to - * run here: - */ - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - asm volatile( - "2:" - "testl %0, %1;" - "rep; nop;" - "je 2b;" - : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); - - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } + asm volatile( + "2:" + "testl %0, %1;" + "rep; nop;" + "je 2b;" + : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); } #ifdef CONFIG_HOTPLUG_CPU @@ -179,7 +172,9 @@ static inline void play_dead(void) */ void cpu_idle(void) { - int cpu = raw_smp_processor_id(); + int cpu = smp_processor_id(); + + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { @@ -201,7 +196,9 @@ void cpu_idle(void) __get_cpu_var(irq_stat).idle_timestamp = jiffies; idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -244,15 +241,12 @@ static void mwait_idle(void) { local_irq_enable(); - if (!need_resched()) { - set_thread_flag(TIF_POLLING_NRFLAG); - do { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - if (need_resched()) - break; - __mwait(0, 0); - } while (!need_resched()); - clear_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (need_resched()) + break; + __mwait(0, 0); } } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index b48ac635f3c..fdfcb0cba9b 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -129,9 +129,7 @@ struct drive_info_struct { char dummy[32]; } drive_info; EXPORT_SYMBOL(drive_info); #endif struct screen_info screen_info; -#ifdef CONFIG_VT EXPORT_SYMBOL(screen_info); -#endif struct apm_info apm_info; EXPORT_SYMBOL(apm_info); struct sys_desc_table_struct { diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 47ec76794d0..bc5a9d97466 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -485,6 +485,7 @@ static void __devinit start_secondary(void *unused) * things done here to the most necessary things. */ cpu_init(); + preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 3984226a8b9..eeb1b1f2d54 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -433,9 +433,8 @@ static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) return; /* only applies to certain Toshibas (so far) */ /* Restore config space on Toshiba laptops */ - mdelay(10); pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); - pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, pci_resource_start(dev, 0)); pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c index 164b211f417..88739394f6d 100644 --- a/arch/ia64/ia32/ia32_ioctl.c +++ b/arch/ia64/ia32/ia32_ioctl.c @@ -29,10 +29,8 @@ #define CODE #include "compat_ioctl.c" -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index f72ea6aebcb..a3aa45cbcfa 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -987,7 +987,7 @@ efi_initialize_iomem_resources(struct resource *code_resource, break; } - if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) { + if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) { printk(KERN_ERR "failed to alocate resource for iomem\n"); return; } diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 96736a119c9..801eeaeaf3d 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -347,7 +347,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) ((struct fnptr *)kretprobe_trampoline)->ip; spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); + head = kretprobe_inst_table_head(current); /* * It is possible to have multiple instances associated with a given @@ -363,9 +363,9 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * kretprobe_trampoline */ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) + if (ri->task != current) /* another task is sharing our hash bucket */ - continue; + continue; if (ri->rp && ri->rp->handler) ri->rp->handler(ri, regs); @@ -394,7 +394,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * kprobe_handler() that we don't want the post_handler * to run (and have re-enabled preemption) */ - return 1; + return 1; } /* Called with kretprobe_lock held */ @@ -739,12 +739,16 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, switch(val) { case DIE_BREAK: - if (pre_kprobes_handler(args)) - ret = NOTIFY_STOP; + /* err is break number from ia64_bad_break() */ + if (args->err == 0x80200 || args->err == 0x80300) + if (pre_kprobes_handler(args)) + ret = NOTIFY_STOP; break; - case DIE_SS: - if (post_kprobes_handler(args->regs)) - ret = NOTIFY_STOP; + case DIE_FAULT: + /* err is vector number from ia64_fault() */ + if (args->err == 36) + if (post_kprobes_handler(args->regs)) + ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: /* kprobe_running() needs smp_processor_id() */ diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 52c47da1724..355af15287c 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -51,6 +51,9 @@ * * 2005-08-12 Keith Owens <kaos@sgi.com> * Convert MCA/INIT handlers to use per event stacks and SAL/OS state. + * + * 2005-10-07 Keith Owens <kaos@sgi.com> + * Add notify_die() hooks. */ #include <linux/config.h> #include <linux/types.h> @@ -58,7 +61,6 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/kallsyms.h> #include <linux/smp_lock.h> #include <linux/bootmem.h> #include <linux/acpi.h> @@ -69,6 +71,7 @@ #include <linux/workqueue.h> #include <asm/delay.h> +#include <asm/kdebug.h> #include <asm/machvec.h> #include <asm/meminit.h> #include <asm/page.h> @@ -132,6 +135,14 @@ extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe); static int mca_init; + +static void inline +ia64_mca_spin(const char *func) +{ + printk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func); + while (1) + cpu_relax(); +} /* * IA64_MCA log support */ @@ -526,13 +537,16 @@ ia64_mca_wakeup_all(void) * Outputs : None */ static irqreturn_t -ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) +ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs) { unsigned long flags; int cpu = smp_processor_id(); /* Mask all interrupts */ local_irq_save(flags); + if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE; /* Register with the SAL monarch that the slave has @@ -540,10 +554,18 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) */ ia64_sal_mc_rendez(); + if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + /* Wait for the monarch cpu to exit. */ while (monarch_cpu != -1) cpu_relax(); /* spin until monarch leaves */ + if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + /* Enable all interrupts */ local_irq_restore(flags); return IRQ_HANDLED; @@ -933,6 +955,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; + if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); ia64_wait_for_slaves(cpu); /* Wakeup all the processors which are spinning in the rendezvous loop. @@ -942,6 +967,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, * spinning in SAL does not work. */ ia64_mca_wakeup_all(); + if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); /* Get the MCA error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA); @@ -960,6 +988,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA); sos->os_status = IA64_MCA_CORRECTED; } + if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, 0, 0, recover) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); set_curr_task(cpu, previous_current); monarch_cpu = -1; @@ -1188,6 +1219,37 @@ ia64_mca_cpe_poll (unsigned long dummy) #endif /* CONFIG_ACPI */ +static int +default_monarch_init_process(struct notifier_block *self, unsigned long val, void *data) +{ + int c; + struct task_struct *g, *t; + if (val != DIE_INIT_MONARCH_PROCESS) + return NOTIFY_DONE; + printk(KERN_ERR "Processes interrupted by INIT -"); + for_each_online_cpu(c) { + struct ia64_sal_os_state *s; + t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); + s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); + g = s->prev_task; + if (g) { + if (g->pid) + printk(" %d", g->pid); + else + printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); + } + } + printk("\n\n"); + if (read_trylock(&tasklist_lock)) { + do_each_thread (g, t) { + printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); + show_stack(t, NULL); + } while_each_thread (g, t); + read_unlock(&tasklist_lock); + } + return NOTIFY_DONE; +} + /* * C portion of the OS INIT handler * @@ -1212,8 +1274,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, static atomic_t slaves; static atomic_t monarchs; task_t *previous_current; - int cpu = smp_processor_id(), c; - struct task_struct *g, *t; + int cpu = smp_processor_id(); oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ console_loglevel = 15; /* make sure printks make it to console */ @@ -1253,8 +1314,17 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT; while (monarch_cpu == -1) cpu_relax(); /* spin until monarch enters */ + if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); while (monarch_cpu != -1) cpu_relax(); /* spin until monarch leaves */ + if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); printk("Slave on cpu %d returning to normal service.\n", cpu); set_curr_task(cpu, previous_current); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; @@ -1263,6 +1333,9 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, } monarch_cpu = cpu; + if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); /* * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be @@ -1273,27 +1346,16 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, printk("Delaying for 5 seconds...\n"); udelay(5*1000000); ia64_wait_for_slaves(cpu); - printk(KERN_ERR "Processes interrupted by INIT -"); - for_each_online_cpu(c) { - struct ia64_sal_os_state *s; - t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); - s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); - g = s->prev_task; - if (g) { - if (g->pid) - printk(" %d", g->pid); - else - printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); - } - } - printk("\n\n"); - if (read_trylock(&tasklist_lock)) { - do_each_thread (g, t) { - printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); - show_stack(t, NULL); - } while_each_thread (g, t); - read_unlock(&tasklist_lock); - } + /* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through + * to default_monarch_init_process() above and just print all the + * tasks. + */ + if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); atomic_dec(&monarchs); set_curr_task(cpu, previous_current); @@ -1462,6 +1524,10 @@ ia64_mca_init(void) s64 rc; struct ia64_sal_retval isrv; u64 timeout = IA64_MCA_RENDEZ_TIMEOUT; /* platform specific */ + static struct notifier_block default_init_monarch_nb = { + .notifier_call = default_monarch_init_process, + .priority = 0/* we need to notified last */ + }; IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__); @@ -1555,6 +1621,10 @@ ia64_mca_init(void) "(status %ld)\n", rc); return; } + if (register_die_notifier(&default_init_monarch_nb)) { + printk(KERN_ERR "Failed to register default monarch INIT process\n"); + return; + } IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index f081c60ab20..3492e3211a4 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -88,7 +88,7 @@ mca_page_isolate(unsigned long paddr) if (!ia64_phys_addr_valid(paddr)) return ISOLATE_NONE; - if (!pfn_valid(paddr)) + if (!pfn_valid(paddr >> PAGE_SHIFT)) return ISOLATE_NONE; /* convert physical address to physical page number */ @@ -108,6 +108,7 @@ mca_page_isolate(unsigned long paddr) return ISOLATE_NG; /* add attribute 'Reserved' and register the page */ + get_page(p); SetPageReserved(p); page_isolate[num_page_isolate++] = p; @@ -546,9 +547,20 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, (pal_processor_state_info_t*)peidx_psp(peidx); /* - * We cannot recover errors with other than bus_check. + * Processor recovery status must key off of the PAL recovery + * status in the Processor State Parameter. */ - if (psp->cc || psp->rc || psp->uc) + + /* + * The machine check is corrected. + */ + if (psp->cm == 1) + return 1; + + /* + * The error was not contained. Software must be reset. + */ + if (psp->us || psp->ci == 0) return 0; /* @@ -569,8 +581,6 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return 0; if (pbci->eb && pbci->bsi > 0) return 0; - if (psp->ci == 0) - return 0; /* * This is a local MCA and estimated as recoverble external bus error. diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 051e050359e..e92ea64d804 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -4,6 +4,9 @@ * Copyright (C) 1998-2003 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> * 04/11/17 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support + * + * 2005-10-07 Keith Owens <kaos@sgi.com> + * Add notify_die() hooks. */ #define __KERNEL_SYSCALLS__ /* see <asm/unistd.h> */ #include <linux/config.h> @@ -34,6 +37,7 @@ #include <asm/elf.h> #include <asm/ia32.h> #include <asm/irq.h> +#include <asm/kdebug.h> #include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/sal.h> @@ -197,11 +201,15 @@ void default_idle (void) { local_irq_enable(); - while (!need_resched()) - if (can_do_pal_halt) - safe_halt(); - else + while (!need_resched()) { + if (can_do_pal_halt) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + local_irq_enable(); + } else cpu_relax(); + } } #ifdef CONFIG_HOTPLUG_CPU @@ -263,16 +271,16 @@ void __attribute__((noreturn)) cpu_idle (void) { void (*mark_idle)(int) = ia64_mark_idle; + int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { + if (!need_resched()) { + void (*idle)(void); #ifdef CONFIG_SMP - if (!need_resched()) min_xtp(); #endif - while (!need_resched()) { - void (*idle)(void); - if (__get_cpu_var(cpu_idle_state)) __get_cpu_var(cpu_idle_state) = 0; @@ -284,17 +292,17 @@ cpu_idle (void) if (!idle) idle = default_idle; (*idle)(); - } - - if (mark_idle) - (*mark_idle)(0); - + if (mark_idle) + (*mark_idle)(0); #ifdef CONFIG_SMP - normal_xtp(); + normal_xtp(); #endif + } + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); - if (cpu_is_offline(smp_processor_id())) + if (cpu_is_offline(cpu)) play_dead(); } } @@ -804,12 +812,14 @@ cpu_halt (void) void machine_restart (char *restart_cmd) { + (void) notify_die(DIE_MACHINE_RESTART, restart_cmd, NULL, 0, 0, 0); (*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL); } void machine_halt (void) { + (void) notify_die(DIE_MACHINE_HALT, "", NULL, 0, 0, 0); cpu_halt(); } diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 3af6de36a48..5add0bcf87a 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -461,6 +461,7 @@ setup_arch (char **cmdline_p) #endif cpu_init(); /* initialize the bootstrap CPU */ + mmu_context_init(); /* initialize context_id bitmap */ #ifdef CONFIG_ACPI acpi_boot_init(); diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 774f34b675c..58ce07efc56 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -387,15 +387,14 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct sigscratch *scr) { extern char __kernel_sigtramp[]; - unsigned long tramp_addr, new_rbs = 0; + unsigned long tramp_addr, new_rbs = 0, new_sp; struct sigframe __user *frame; long err; - frame = (void __user *) scr->pt.r12; + new_sp = scr->pt.r12; tramp_addr = (unsigned long) __kernel_sigtramp; - if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags((unsigned long) frame) == 0) { - frame = (void __user *) ((current->sas_ss_sp + current->sas_ss_size) - & ~(STACK_ALIGN - 1)); + if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) { + new_sp = current->sas_ss_sp + current->sas_ss_size; /* * We need to check for the register stack being on the signal stack * separately, because it's switched separately (memory stack is switched @@ -404,7 +403,7 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, if (!rbs_on_sig_stack(scr->pt.ar_bspstore)) new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1); } - frame = (void __user *) frame - ((sizeof(*frame) + STACK_ALIGN - 1) & ~(STACK_ALIGN - 1)); + frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return force_sigsegv_info(sig, frame); diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 400a4898712..8f44e7d2df6 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -399,6 +399,7 @@ start_secondary (void *unused) Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id()); efi_map_pal_code(); cpu_init(); + preempt_disable(); smp_callin(); cpu_idle(); diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index f970359e7ed..fba5fdd1f96 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -30,17 +30,20 @@ fpswa_interface_t *fpswa_interface; EXPORT_SYMBOL(fpswa_interface); struct notifier_block *ia64die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); -int register_die_notifier(struct notifier_block *nb) +int +register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&ia64die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; + return notifier_chain_register(&ia64die_chain, nb); } +EXPORT_SYMBOL_GPL(register_die_notifier); + +int +unregister_die_notifier(struct notifier_block *nb) +{ + return notifier_chain_unregister(&ia64die_chain, nb); +} +EXPORT_SYMBOL_GPL(unregister_die_notifier); void __init trap_init (void) @@ -105,6 +108,7 @@ die (const char *str, struct pt_regs *regs, long err) if (++die.lock_owner_depth < 3) { printk("%s[%d]: %s %ld [%d]\n", current->comm, current->pid, str, err, ++die_counter); + (void) notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV); show_regs(regs); } else printk(KERN_ERR "Recursive die() failure, output suppressed\n"); @@ -155,9 +159,8 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) switch (break_num) { case 0: /* unknown error (used by GCC for __builtin_abort()) */ if (notify_die(DIE_BREAK, "break 0", regs, break_num, TRAP_BRKPT, SIGTRAP) - == NOTIFY_STOP) { + == NOTIFY_STOP) return; - } die_if_kernel("bugcheck!", regs, break_num); sig = SIGILL; code = ILL_ILLOPC; break; @@ -210,15 +213,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) sig = SIGILL; code = __ILL_BNDMOD; break; - case 0x80200: - case 0x80300: - if (notify_die(DIE_BREAK, "kprobe", regs, break_num, TRAP_BRKPT, SIGTRAP) - == NOTIFY_STOP) { - return; - } - sig = SIGTRAP; code = TRAP_BRKPT; - break; - default: if (break_num < 0x40000 || break_num > 0x100000) die_if_kernel("Bad break", regs, break_num); @@ -226,6 +220,9 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) if (break_num < 0x80000) { sig = SIGILL; code = __ILL_BREAK; } else { + if (notify_die(DIE_BREAK, "bad break", regs, break_num, TRAP_BRKPT, SIGTRAP) + == NOTIFY_STOP) + return; sig = SIGTRAP; code = TRAP_BRKPT; } } @@ -578,12 +575,11 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, #endif break; case 35: siginfo.si_code = TRAP_BRANCH; ifa = 0; break; - case 36: - if (notify_die(DIE_SS, "ss", ®s, vector, - vector, SIGTRAP) == NOTIFY_STOP) - return; - siginfo.si_code = TRAP_TRACE; ifa = 0; break; + case 36: siginfo.si_code = TRAP_TRACE; ifa = 0; break; } + if (notify_die(DIE_FAULT, "ia64_fault", ®s, vector, siginfo.si_code, SIGTRAP) + == NOTIFY_STOP) + return; siginfo.si_signo = SIGTRAP; siginfo.si_errno = 0; siginfo.si_addr = (void __user *) ifa; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index a88cdb7232f..0f776b032d3 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -350,14 +350,12 @@ static void __init initialize_pernode_data(void) * for best. * @nid: node id * @pernodesize: size of this node's pernode data - * @align: alignment to use for this node's pernode data */ -static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, - unsigned long align) +static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize) { void *ptr = NULL; u8 best = 0xff; - int bestnode = -1, node; + int bestnode = -1, node, anynode = 0; for_each_online_node(node) { if (node_isset(node, memory_less_mask)) @@ -366,13 +364,15 @@ static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, best = node_distance(nid, node); bestnode = node; } + anynode = node; } - ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, - pernodesize, align, __pa(MAX_DMA_ADDRESS)); + if (bestnode == -1) + bestnode = anynode; + + ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, pernodesize, + PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); - if (!ptr) - panic("NO memory for memory less node\n"); return ptr; } @@ -413,8 +413,7 @@ static void __init memory_less_nodes(void) for_each_node_mask(node, memory_less_mask) { pernodesize = compute_pernodesize(node); - pernode = memory_less_node_alloc(node, pernodesize, - (node) ? (node * PERCPU_PAGE_SIZE) : (1024*1024)); + pernode = memory_less_node_alloc(node, pernodesize); fill_pernode(node, __pa(pernode), pernodesize); } diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index c79a9b96d02..41105d45442 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -8,6 +8,8 @@ * Modified RID allocation for SMP * Goutham Rao <goutham.rao@intel.com> * IPI based ptc implementation and A-step IPI implementation. + * Rohit Seth <rohit.seth@intel.com> + * Ken Chen <kenneth.w.chen@intel.com> */ #include <linux/config.h> #include <linux/module.h> @@ -16,78 +18,75 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/mm.h> +#include <linux/bootmem.h> #include <asm/delay.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/pal.h> #include <asm/tlbflush.h> +#include <asm/dma.h> static struct { unsigned long mask; /* mask of supported purge page-sizes */ - unsigned long max_bits; /* log2() of largest supported purge page-size */ + unsigned long max_bits; /* log2 of largest supported purge page-size */ } purge; struct ia64_ctx ia64_ctx = { .lock = SPIN_LOCK_UNLOCKED, .next = 1, - .limit = (1 << 15) - 1, /* start out with the safe (architected) limit */ .max_ctx = ~0U }; DEFINE_PER_CPU(u8, ia64_need_tlb_flush); /* + * Initializes the ia64_ctx.bitmap array based on max_ctx+1. + * Called after cpu_init() has setup ia64_ctx.max_ctx based on + * maximum RID that is supported by boot CPU. + */ +void __init +mmu_context_init (void) +{ + ia64_ctx.bitmap = alloc_bootmem((ia64_ctx.max_ctx+1)>>3); + ia64_ctx.flushmap = alloc_bootmem((ia64_ctx.max_ctx+1)>>3); +} + +/* * Acquire the ia64_ctx.lock before calling this function! */ void wrap_mmu_context (struct mm_struct *mm) { - unsigned long tsk_context, max_ctx = ia64_ctx.max_ctx; - struct task_struct *tsk; - int i; + int i, cpu; + unsigned long flush_bit; - if (ia64_ctx.next > max_ctx) - ia64_ctx.next = 300; /* skip daemons */ - ia64_ctx.limit = max_ctx + 1; + for (i=0; i <= ia64_ctx.max_ctx / BITS_PER_LONG; i++) { + flush_bit = xchg(&ia64_ctx.flushmap[i], 0); + ia64_ctx.bitmap[i] ^= flush_bit; + } + + /* use offset at 300 to skip daemons */ + ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap, + ia64_ctx.max_ctx, 300); + ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap, + ia64_ctx.max_ctx, ia64_ctx.next); /* - * Scan all the task's mm->context and set proper safe range + * can't call flush_tlb_all() here because of race condition + * with O(1) scheduler [EF] */ - - read_lock(&tasklist_lock); - repeat: - for_each_process(tsk) { - if (!tsk->mm) - continue; - tsk_context = tsk->mm->context; - if (tsk_context == ia64_ctx.next) { - if (++ia64_ctx.next >= ia64_ctx.limit) { - /* empty range: reset the range limit and start over */ - if (ia64_ctx.next > max_ctx) - ia64_ctx.next = 300; - ia64_ctx.limit = max_ctx + 1; - goto repeat; - } - } - if ((tsk_context > ia64_ctx.next) && (tsk_context < ia64_ctx.limit)) - ia64_ctx.limit = tsk_context; - } - read_unlock(&tasklist_lock); - /* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */ - { - int cpu = get_cpu(); /* prevent preemption/migration */ - for_each_online_cpu(i) { - if (i != cpu) - per_cpu(ia64_need_tlb_flush, i) = 1; - } - put_cpu(); - } + cpu = get_cpu(); /* prevent preemption/migration */ + for_each_online_cpu(i) + if (i != cpu) + per_cpu(ia64_need_tlb_flush, i) = 1; + put_cpu(); local_flush_tlb_all(); } void -ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits) +ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, + unsigned long end, unsigned long nbits) { static DEFINE_SPINLOCK(ptcg_lock); @@ -135,7 +134,8 @@ local_flush_tlb_all (void) } void -flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end) +flush_tlb_range (struct vm_area_struct *vma, unsigned long start, + unsigned long end) { struct mm_struct *mm = vma->vm_mm; unsigned long size = end - start; @@ -149,7 +149,8 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long #endif nbits = ia64_fls(size + 0xfff); - while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits)) + while (unlikely (((1UL << nbits) & purge.mask) == 0) && + (nbits < purge.max_bits)) ++nbits; if (nbits > purge.max_bits) nbits = purge.max_bits; @@ -191,5 +192,5 @@ ia64_tlb_init (void) local_cpu_data->ptce_stride[0] = ptce_info.stride[0]; local_cpu_data->ptce_stride[1] = ptce_info.stride[1]; - local_flush_tlb_all(); /* nuke left overs from bootstrapping... */ + local_flush_tlb_all(); /* nuke left overs from bootstrapping... */ } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 017cfc3f478..20d76fae24e 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -95,7 +95,7 @@ pci_sal_write (unsigned int seg, unsigned int bus, unsigned int devfn, } static struct pci_raw_ops pci_sal_ops = { - .read = pci_sal_read, + .read = pci_sal_read, .write = pci_sal_write }; @@ -137,35 +137,98 @@ alloc_pci_controller (int seg) return controller; } -static u64 __devinit -add_io_space (struct acpi_resource_address64 *addr) +struct pci_root_info { + struct pci_controller *controller; + char *name; +}; + +static unsigned int +new_space (u64 phys_base, int sparse) { - u64 offset; - int sparse = 0; + u64 mmio_base; int i; - if (addr->address_translation_offset == 0) - return IO_SPACE_BASE(0); /* part of legacy IO space */ - - if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION) - sparse = 1; + if (phys_base == 0) + return 0; /* legacy I/O port space */ - offset = (u64) ioremap(addr->address_translation_offset, 0); + mmio_base = (u64) ioremap(phys_base, 0); for (i = 0; i < num_io_spaces; i++) - if (io_space[i].mmio_base == offset && + if (io_space[i].mmio_base == mmio_base && io_space[i].sparse == sparse) - return IO_SPACE_BASE(i); + return i; if (num_io_spaces == MAX_IO_SPACES) { - printk("Too many IO port spaces\n"); + printk(KERN_ERR "PCI: Too many IO port spaces " + "(MAX_IO_SPACES=%lu)\n", MAX_IO_SPACES); return ~0; } i = num_io_spaces++; - io_space[i].mmio_base = offset; + io_space[i].mmio_base = mmio_base; io_space[i].sparse = sparse; - return IO_SPACE_BASE(i); + return i; +} + +static u64 __devinit +add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr) +{ + struct resource *resource; + char *name; + u64 base, min, max, base_port; + unsigned int sparse = 0, space_nr, len; + + resource = kzalloc(sizeof(*resource), GFP_KERNEL); + if (!resource) { + printk(KERN_ERR "PCI: No memory for %s I/O port space\n", + info->name); + goto out; + } + + len = strlen(info->name) + 32; + name = kzalloc(len, GFP_KERNEL); + if (!name) { + printk(KERN_ERR "PCI: No memory for %s I/O port space name\n", + info->name); + goto free_resource; + } + + min = addr->min_address_range; + max = min + addr->address_length - 1; + if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION) + sparse = 1; + + space_nr = new_space(addr->address_translation_offset, sparse); + if (space_nr == ~0) + goto free_name; + + base = __pa(io_space[space_nr].mmio_base); + base_port = IO_SPACE_BASE(space_nr); + snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->name, + base_port + min, base_port + max); + + /* + * The SDM guarantees the legacy 0-64K space is sparse, but if the + * mapping is done by the processor (not the bridge), ACPI may not + * mark it as sparse. + */ + if (space_nr == 0) + sparse = 1; + + resource->name = name; + resource->flags = IORESOURCE_MEM; + resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min); + resource->end = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max); + insert_resource(&iomem_resource, resource); + + return base_port; + +free_name: + kfree(name); +free_resource: + kfree(resource); +out: + return ~0; } static acpi_status __devinit resource_to_window(struct acpi_resource *resource, @@ -205,11 +268,6 @@ count_window (struct acpi_resource *resource, void *data) return AE_OK; } -struct pci_root_info { - struct pci_controller *controller; - char *name; -}; - static __devinit acpi_status add_window(struct acpi_resource *res, void *data) { struct pci_root_info *info = data; @@ -231,7 +289,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) } else if (addr.resource_type == ACPI_IO_RANGE) { flags = IORESOURCE_IO; root = &ioport_resource; - offset = add_io_space(&addr); + offset = add_io_space(info, &addr); if (offset == ~0) return AE_OK; } else @@ -241,7 +299,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) window->resource.name = info->name; window->resource.flags = flags; window->resource.start = addr.min_address_range + offset; - window->resource.end = addr.max_address_range + offset; + window->resource.end = window->resource.start + addr.address_length - 1; window->resource.child = NULL; window->offset = offset; @@ -739,7 +797,7 @@ int pci_vector_resources(int last, int nr_released) { int count = nr_released; - count += (IA64_LAST_DEVICE_VECTOR - last); + count += (IA64_LAST_DEVICE_VECTOR - last); return count; } diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index b4f5053f5e1..05e4ea88998 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -349,7 +349,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL); + controller = kzalloc(sizeof(struct pci_controller), GFP_KERNEL); controller->segment = segment; if (!controller) BUG(); diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index fbcedc7c27f..5483a9f227d 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -163,7 +163,7 @@ struct xpc_vars { u8 version; u64 heartbeat; u64 heartbeating_to_mask; - u64 kdb_status; /* 0 = machine running */ + u64 heartbeat_offline; /* if 0, heartbeat should be changing */ int act_nasid; int act_phys_cpuid; u64 vars_part_pa; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index cece3c7c69b..b617236524c 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -57,6 +57,7 @@ #include <linux/reboot.h> #include <asm/sn/intr.h> #include <asm/sn/sn_sal.h> +#include <asm/kdebug.h> #include <asm/uaccess.h> #include "xpc.h" @@ -188,6 +189,11 @@ static struct notifier_block xpc_reboot_notifier = { .notifier_call = xpc_system_reboot, }; +static int xpc_system_die(struct notifier_block *, unsigned long, void *); +static struct notifier_block xpc_die_notifier = { + .notifier_call = xpc_system_die, +}; + /* * Timer function to enforce the timelimit on the partition disengage request. @@ -997,6 +1003,9 @@ xpc_do_exit(enum xpc_retval reason) /* take ourselves off of the reboot_notifier_list */ (void) unregister_reboot_notifier(&xpc_reboot_notifier); + /* take ourselves off of the die_notifier list */ + (void) unregister_die_notifier(&xpc_die_notifier); + /* close down protections for IPI operations */ xpc_restrict_IPI_ops(); @@ -1011,6 +1020,63 @@ xpc_do_exit(enum xpc_retval reason) /* + * Called when the system is about to be either restarted or halted. + */ +static void +xpc_die_disengage(void) +{ + struct xpc_partition *part; + partid_t partid; + unsigned long engaged; + long time, print_time, disengage_request_timeout; + + + /* keep xpc_hb_checker thread from doing anything (just in case) */ + xpc_exiting = 1; + + xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ + + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)) { + + /* just in case it was left set by an earlier XPC */ + xpc_clear_partition_engaged(1UL << partid); + continue; + } + + if (xpc_partition_engaged(1UL << partid) || + part->act_state != XPC_P_INACTIVE) { + xpc_request_partition_disengage(part); + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + } + + print_time = rtc_time(); + disengage_request_timeout = print_time + + (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); + + /* wait for all other partitions to disengage from us */ + + while ((engaged = xpc_partition_engaged(-1UL)) && + (time = rtc_time()) < disengage_request_timeout) { + + if (time >= print_time) { + dev_info(xpc_part, "waiting for remote partitions to " + "disengage, engaged=0x%lx\n", engaged); + print_time = time + (XPC_DISENGAGE_PRINTMSG_INTERVAL * + sn_rtc_cycles_per_second); + } + } + dev_info(xpc_part, "finished waiting for remote partitions to " + "disengage, engaged=0x%lx\n", engaged); +} + + +/* * This function is called when the system is being rebooted. */ static int @@ -1038,6 +1104,33 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) } +/* + * This function is called when the system is being rebooted. + */ +static int +xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) +{ + switch (event) { + case DIE_MACHINE_RESTART: + case DIE_MACHINE_HALT: + xpc_die_disengage(); + break; + case DIE_MCA_MONARCH_ENTER: + case DIE_INIT_MONARCH_ENTER: + xpc_vars->heartbeat++; + xpc_vars->heartbeat_offline = 1; + break; + case DIE_MCA_MONARCH_LEAVE: + case DIE_INIT_MONARCH_LEAVE: + xpc_vars->heartbeat++; + xpc_vars->heartbeat_offline = 0; + break; + } + + return NOTIFY_DONE; +} + + int __init xpc_init(void) { @@ -1154,6 +1247,12 @@ xpc_init(void) dev_warn(xpc_part, "can't register reboot notifier\n"); } + /* add ourselves to the die_notifier list (i.e., ia64die_chain) */ + ret = register_die_notifier(&xpc_die_notifier); + if (ret != 0) { + dev_warn(xpc_part, "can't register die notifier\n"); + } + /* * Set the beating to other partitions into motion. This is @@ -1179,6 +1278,9 @@ xpc_init(void) /* take ourselves off of the reboot_notifier_list */ (void) unregister_reboot_notifier(&xpc_reboot_notifier); + /* take ourselves off of the die_notifier list */ + (void) unregister_die_notifier(&xpc_die_notifier); + del_timer_sync(&xpc_hb_timer); free_irq(SGI_XPC_ACTIVATE, NULL); xpc_restrict_IPI_ops(); diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 581e113d2d3..cdd6431853a 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -436,13 +436,13 @@ xpc_check_remote_hb(void) } dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" - " = %ld, kdb_status = %ld, HB_mask = 0x%lx\n", partid, - remote_vars->heartbeat, part->last_heartbeat, - remote_vars->kdb_status, + " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n", + partid, remote_vars->heartbeat, part->last_heartbeat, + remote_vars->heartbeat_offline, remote_vars->heartbeating_to_mask); if (((remote_vars->heartbeat == part->last_heartbeat) && - (remote_vars->kdb_status == 0)) || + (remote_vars->heartbeat_offline == 0)) || !xpc_hb_allowed(sn_partition_id, remote_vars)) { XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 7b03b8084ff..1f500c81002 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -212,13 +212,13 @@ void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info) pdi_pcibus_info; /* Disable the device's IRQ */ - pcireg_intr_enable_bit_clr(pcibus_info, bit); + pcireg_intr_enable_bit_clr(pcibus_info, (1 << bit)); /* Change the device's IRQ */ pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr); /* Re-enable the device's IRQ */ - pcireg_intr_enable_bit_set(pcibus_info, bit); + pcireg_intr_enable_bit_set(pcibus_info, (1 << bit)); pcibr_force_interrupt(sn_irq_info); } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 4f718c3e93d..5d534091262 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -131,7 +131,7 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits); + __sn_clrq_relaxed(&ptr->pic.p_int_enable, bits); break; default: panic diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 9f03d4e5121..dda196c9e32 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -218,7 +218,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, if (i > last) return 0; - map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC); + map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC); if (!map) return 0; @@ -555,7 +555,7 @@ tioce_kern_init(struct tioce_common *tioce_common) struct tioce *tioce_mmr; struct tioce_kernel *tioce_kern; - tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL); + tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL); if (!tioce_kern) { return NULL; } @@ -727,7 +727,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL); + tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL); if (!tioce_common) return NULL; diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index ea13a8f4d8b..cc4b571e5db 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -104,7 +104,9 @@ void cpu_idle (void) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index 640d592ea07..b90c54169fa 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -426,6 +426,7 @@ void __init smp_cpus_done(unsigned int max_cpus) int __init start_secondary(void *unused) { cpu_init(); + preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) cpu_relax(); diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index 11b1b90ba6b..13d109328a4 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -102,7 +102,9 @@ void cpu_idle(void) while (1) { while (!need_resched()) idle(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 1ef15d5ef94..4f21f42d096 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -111,17 +111,6 @@ void __init plat_setup(void) } #endif -#ifdef CONFIG_FB_E1356 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); -#ifdef CONFIG_MIPS_PB1000 - strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1"); -#else - strcat(argptr, " video=e1356fb:system:pb1500"); -#endif - } -#endif - #ifdef CONFIG_FB_XPERT98 if ((argptr = strstr(argptr, "video=")) == NULL) { argptr = prom_getcmdline(); diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index b260e51eb51..326f3aa6374 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -658,7 +658,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9a728c2d8fd..6390a753e80 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -628,7 +628,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index ffb23fcab86..f18d05c2ca7 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -758,7 +758,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 05e65206a7b..37bd8d5c865 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -897,7 +897,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 2bc61ca4ba0..897420d3905 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -876,7 +876,6 @@ CONFIG_FB_ATY_CT=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c index ed9b2da510b..9ea1fc74886 100644 --- a/arch/mips/kernel/ioctl32.c +++ b/arch/mips/kernel/ioctl32.c @@ -26,10 +26,8 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); #define CODE #include "compat_ioctl.c" -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 4fe3d5715c4..dd725779d91 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -52,7 +52,9 @@ ATTRIB_NORET void cpu_idle(void) while (!need_resched()) if (cpu_wait) (*cpu_wait)(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index fcacf1aae98..25472fcaf71 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -82,7 +82,7 @@ extern ATTRIB_NORET void cpu_idle(void); */ asmlinkage void start_secondary(void) { - unsigned int cpu = smp_processor_id(); + unsigned int cpu; cpu_probe(); cpu_report(); @@ -95,6 +95,8 @@ asmlinkage void start_secondary(void) */ calibrate_delay(); + preempt_disable(); + cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; prom_smp_finish(); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index 230f5a93c2e..9cd9c0fe226 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -84,7 +84,6 @@ IRQ Device #include <asm/ptrace.h> #include <asm/reboot.h> #include <asm/time.h> -#include <linux/version.h> #include <linux/bootmem.h> #include <asm/tx4938/rbtx4938.h> diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index 1ad44f92d6e..e23c4e1e3a2 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -30,7 +30,6 @@ #include <linux/types.h> #include <linux/sched.h> #include <linux/thread_info.h> -#include <linux/version.h> #include <linux/ptrace.h> #include <linux/hardirq.h> diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 7fdca87ef64..fee4f1f09ad 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -88,11 +88,15 @@ void default_idle(void) */ void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) barrier(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 5db3be4e270..a9ecf646578 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -463,6 +463,7 @@ void __init smp_callin(void) #endif smp_cpu_init(slave_id); + preempt_disable(); #if 0 /* NOT WORKING YET - see entry.S */ istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 1493c7896fe..c523029674e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -581,17 +581,12 @@ config ARCH_FLATMEM_ENABLE def_bool y depends on PPC64 && !NUMA -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - depends on SMP && PPC_PSERIES - -config ARCH_DISCONTIGMEM_DEFAULT +config ARCH_SPARSEMEM_ENABLE def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE -config ARCH_SPARSEMEM_ENABLE +config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE + depends on SMP && PPC_PSERIES source "mm/Kconfig" @@ -599,6 +594,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NEED_MULTIPLE_NODES +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + # Some NUMA nodes have memory ranges that span # other nodes. Even though a pfn is valid and # between a node's start and end pfns, it may not diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b3ae2993efb..9a74b7ab03a 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -4,6 +4,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc +CFLAGS_ioctl32.o += -Ifs/ endif ifeq ($(CONFIG_PPC32),y) CFLAGS_prom_init.o += -fPIC @@ -11,17 +12,29 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - signal_32.o pmc.o + irq.o signal_32.o pmc.o vdso.o +obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - signal_64.o ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o \ + paca.o ioctl32.o cpu_setup_power4.o \ + firmware.o sysfs.o udbg.o +obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o -obj-$(CONFIG_PPC_RTAS) += rtas.o +procfs-$(CONFIG_PPC64) := proc_ppc64.o +obj-$(CONFIG_PROC_FS) += $(procfs-y) +rtaspci-$(CONFIG_PPC64) := rtas_pci.o +obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o +obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o +obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o +obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o +udbgscc-$(CONFIG_PPC64) := udbg_scc.o +obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b7575725199..4550eb4f4fb 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -37,12 +37,12 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/rtas.h> +#include <asm/vdso_datapage.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/iseries/hv_lp_event.h> #include <asm/cache.h> -#include <asm/systemcfg.h> #include <asm/compat.h> #endif @@ -106,7 +106,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ @@ -252,25 +251,42 @@ int main(void) DEFINE(TASK_SIZE, TASK_SIZE); DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28); -#else /* CONFIG_PPC64 */ - /* systemcfg offsets for use by vdso */ - DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp)); - DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec)); - DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs)); - DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec)); - DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count)); - DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest)); - DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime)); - DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32)); - DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64)); +#endif /* ! CONFIG_PPC64 */ - /* timeval/timezone offsets for use by vdso */ + /* datapage offsets for use by vdso */ + DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp)); + DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec)); + DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs)); + DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec)); + DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count)); + DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest)); + DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime)); + DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32)); + DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec)); + DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); +#ifdef CONFIG_PPC64 + DEFINE(CFG_SYSCALL_MAP64, offsetof(struct vdso_data, syscall_map_64)); DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec)); DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); + DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec)); + DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec)); +#else + DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); + DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); + DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); +#endif + /* timeval/timezone offsets for use by vdso */ DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); -#endif /* CONFIG_PPC64 */ + + /* Other bits used by the vdso */ + DEFINE(CLOCK_REALTIME, CLOCK_REALTIME); + DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC); + DEFINE(NSEC_PER_SEC, NSEC_PER_SEC); + DEFINE(CLOCK_REALTIME_RES, TICK_NSEC); + return 0; } diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index 1fb673c511f..cca942fe611 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -114,11 +114,11 @@ _GLOBAL(__setup_cpu_ppc970) .data .balign L1_CACHE_BYTES,0 -cpu_state_storage: +cpu_state_storage: .space CS_SIZE .balign L1_CACHE_BYTES,0 .text - + /* Called in normal context to backup CPU 0 state. This * does not include cache settings. This function is also * called for machine sleep. This does not include the MMU @@ -151,7 +151,7 @@ _GLOBAL(__save_cpu_setup) std r3,CS_HID4(r5) mfspr r3,SPRN_HID5 std r3,CS_HID5(r5) - + 2: mtcr r7 blr @@ -213,7 +213,7 @@ _GLOBAL(__restore_cpu_setup) mtspr SPRN_HID1,r3 sync isync - + /* Restore HID4 */ ld r3,CS_HID4(r5) sync diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cc4e9eb1c13..1d85cedbbb7 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -52,6 +52,9 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); #define COMMON_USER (PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \ PPC_FEATURE_HAS_MMU) #define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64) +#define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4) +#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5) +#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS) /* We only set the spe features if the kernel was compiled with @@ -160,7 +163,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00350000, .cpu_name = "POWER4 (gp)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -175,7 +178,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00380000, .cpu_name = "POWER4+ (gq)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -190,7 +193,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00390000, .cpu_name = "PPC970", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -212,7 +215,7 @@ struct cpu_spec cpu_specs[] = { #else .cpu_features = CPU_FTRS_PPC970, #endif - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -230,7 +233,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00440000, .cpu_name = "PPC970MP", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -245,7 +248,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x003a0000, .cpu_name = "POWER5 (gr)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -260,7 +263,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x003b0000, .cpu_name = "POWER5 (gs)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5_PLUS, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -276,7 +279,7 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "Cell Broadband Engine", .cpu_features = CPU_FTRS_CELL, .cpu_user_features = COMMON_USER_PPC64 | - PPC_FEATURE_HAS_ALTIVEC_COMP, + PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_be, diff --git a/arch/ppc64/kernel/firmware.c b/arch/powerpc/kernel/firmware.c index d8432c0fb27..65eae752a52 100644 --- a/arch/ppc64/kernel/firmware.c +++ b/arch/powerpc/kernel/firmware.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/firmware.c - * * Extracted from cputable.c * * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 4d6001fa1cf..b780b42c95f 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -41,20 +41,20 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP LOADBASE(r3, last_task_used_math) toreal(r3) - LDL r4,OFF(last_task_used_math)(r3) - CMPI 0,r4,0 + PPC_LL r4,OFF(last_task_used_math)(r3) + PPC_LCMPI 0,r4,0 beq 1f toreal(r4) addi r4,r4,THREAD /* want last_task_used_math->thread */ SAVE_32FPRS(0, r4) mffs fr0 stfd fr0,THREAD_FPSCR(r4) - LDL r5,PT_REGS(r4) + PPC_LL r5,PT_REGS(r4) toreal(r5) - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r10,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r10 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #endif /* CONFIG_SMP */ /* enable use of FP after return */ @@ -77,7 +77,7 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP subi r4,r5,THREAD fromreal(r4) - STL r4,OFF(last_task_used_math)(r3) + PPC_STL r4,OFF(last_task_used_math)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ /* we haven't used ctr or xer or lr */ @@ -97,24 +97,24 @@ _GLOBAL(giveup_fpu) MTMSRD(r5) /* enable use of fpu now */ SYNC_601 isync - CMPI 0,r3,0 + PPC_LCMPI 0,r3,0 beqlr- /* if no previous owner, done */ addi r3,r3,THREAD /* want THREAD of task */ - LDL r5,PT_REGS(r3) - CMPI 0,r5,0 + PPC_LL r5,PT_REGS(r3) + PPC_LCMPI 0,r5,0 SAVE_32FPRS(0, r3) mffs fr0 stfd fr0,THREAD_FPSCR(r3) beq 1f - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r3,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r3 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #ifndef CONFIG_SMP li r5,0 LOADBASE(r4,last_task_used_math) - STL r5,OFF(last_task_used_math)(r4) + PPC_STL r5,OFF(last_task_used_math)(r4) #endif /* CONFIG_SMP */ blr diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index b102e3a2415..ccdf94731e3 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -1100,6 +1100,7 @@ start_here: mr r3,r31 mr r4,r30 bl machine_init + bl __save_cpu_setup bl MMU_init #ifdef CONFIG_APUS diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 16ab40daa73..8a8bf79ef04 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -28,7 +28,6 @@ #include <asm/reg.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/systemcfg.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/bug.h> @@ -1697,25 +1696,14 @@ _GLOBAL(pmac_secondary_start) * SPRG3 = paca virtual address */ _GLOBAL(__secondary_start) + /* Set thread priority to MEDIUM */ + HMT_MEDIUM - HMT_MEDIUM /* Set thread priority to MEDIUM */ - + /* Load TOC */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize + + /* Do early setup for that CPU (stab, slb, hash table pointer) */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1724,37 +1712,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif + /* Clear backchain so we get nice backtraces */ li r7,0 mtlr r7 @@ -1777,6 +1735,7 @@ _GLOBAL(start_secondary_prolog) li r3,0 std r3,0(r1) /* Zero the stack frame pointer */ bl .start_secondary + b . #endif /* @@ -1896,40 +1855,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - add r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c index ba4a899045c..3fa6a93adbd 100644 --- a/arch/ppc64/kernel/ioctl32.c +++ b/arch/powerpc/kernel/ioctl32.c @@ -1,6 +1,6 @@ -/* +/* * ioctl32.c: Conversion between 32bit and 64bit native ioctls. - * + * * Based on sparc64 ioctl32.c by: * * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) diff --git a/arch/ppc64/kernel/irq.c b/arch/powerpc/kernel/irq.c index 87474584033..4b7940693f3 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -5,12 +5,12 @@ * Copyright (C) 1992 Linus Torvalds * Adapted from arch/i386 by Gary Thomas * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan (cort@cs.nmt.edu) - * Copyright (C) 1996 Cort Dougan + * Updated and modified by Cort Dougan <cort@fsmlabs.com> + * Copyright (C) 1996-2001 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -21,6 +21,14 @@ * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. + * + * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the + * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit + * mask register (of which only 16 are defined), hence the weird shifting + * and complement of the cached_irq_mask. I want to be able to stuff + * this right into the SIU SMASK register. + * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx + * to reduce code space and undefined function references. */ #include <linux/errno.h> @@ -29,6 +37,7 @@ #include <linux/kernel_stat.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/timex.h> @@ -40,9 +49,13 @@ #include <linux/irq.h> #include <linux/proc_fs.h> #include <linux/random.h> -#include <linux/kallsyms.h> +#include <linux/seq_file.h> +#include <linux/cpumask.h> #include <linux/profile.h> #include <linux/bitops.h> +#ifdef CONFIG_PPC64 +#include <linux/kallsyms.h> +#endif #include <asm/uaccess.h> #include <asm/system.h> @@ -52,35 +65,54 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iseries/it_lp_queue.h> #include <asm/machdep.h> +#ifdef CONFIG_PPC64 +#include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> +#endif -#ifdef CONFIG_SMP -extern void iSeries_smp_message_recv( struct pt_regs * ); +static int ppc_spurious_interrupts; + +#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) +extern void iSeries_smp_message_recv(struct pt_regs *); +#endif + +#ifdef CONFIG_PPC32 +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) + +unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +atomic_t ppc_n_lost_interrupts; + +#ifdef CONFIG_TAU_INT +extern int tau_initialized; +extern int tau_interrupts(int); +#endif + +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) +extern atomic_t ipi_recv; +extern atomic_t ipi_sent; #endif +#endif /* CONFIG_PPC32 */ -extern irq_desc_t irq_desc[NR_IRQS]; +#ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; int __irq_offset_value; -int ppc_spurious_interrupts; u64 ppc64_interrupt_controller; +#endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v, j; - struct irqaction * action; + int i = *(loff_t *)v, j; + struct irqaction *action; irq_desc_t *desc; unsigned long flags; if (i == 0) { - seq_printf(p, " "); - for (j=0; j<NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); - } + seq_puts(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%d ", j); seq_putc(p, '\n'); } @@ -92,26 +124,41 @@ int show_interrupts(struct seq_file *p, void *v) goto skip; seq_printf(p, "%3d: ", i); #ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); - } + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #else seq_printf(p, "%10u ", kstat_irqs(i)); #endif /* CONFIG_SMP */ if (desc->handler) - seq_printf(p, " %s ", desc->handler->typename ); + seq_printf(p, " %s ", desc->handler->typename); else - seq_printf(p, " None "); + seq_puts(p, " None "); seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s",action->name); - for (action=action->next; action; action = action->next) + seq_printf(p, " %s", action->name); + for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) + } else if (i == NR_IRQS) { +#ifdef CONFIG_PPC32 +#ifdef CONFIG_TAU_INT + if (tau_initialized){ + seq_puts(p, "TAU: "); + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", tau_interrupts(j)); + seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); + } +#endif +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) + /* should this be per processor send/receive? */ + seq_printf(p, "IPI (recv/sent): %10u/%u\n", + atomic_read(&ipi_recv), atomic_read(&ipi_sent)); +#endif +#endif /* CONFIG_PPC32 */ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); + } return 0; } @@ -144,126 +191,6 @@ void fixup_irqs(cpumask_t map) } #endif -extern int noirqdebug; - -/* - * Eventually, this should take an array of interrupts and an array size - * so it can dispatch multiple interrupts. - */ -void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) -{ - int status; - struct irqaction *action; - int cpu = smp_processor_id(); - irq_desc_t *desc = get_irq_desc(irq); - irqreturn_t action_ret; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif - - kstat_cpu(cpu).irqs[irq]++; - - if (desc->status & IRQ_PER_CPU) { - /* no locking required for CPU-local interrupts: */ - ack_irq(irq); - action_ret = handle_IRQ_event(irq, regs, desc->action); - desc->handler->end(irq); - return; - } - - spin_lock(&desc->lock); - ack_irq(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - if (!action || !action->handler) { - ppc_spurious_interrupts++; - printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq); - /* We can't call disable_irq here, it would deadlock */ - if (!desc->depth) - desc->depth = 1; - desc->status |= IRQ_DISABLED; - /* This is not a real spurrious interrupt, we - * have to eoi it, so we jump to out - */ - mask_irq(irq); - goto out; - } - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in do_IRQ - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - action_ret = call_handle_IRQ_event(irq, regs, action, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - action_ret = handle_IRQ_event(irq, regs, action); - - spin_lock(&desc->lock); - if (!noirqdebug) - note_interrupt(irq, desc, action_ret, regs); - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } -out: - desc->status &= ~IRQ_INPROGRESS; - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - if (desc->handler) { - if (desc->handler->end) - desc->handler->end(irq); - else if (desc->handler->enable) - desc->handler->enable(irq); - } - spin_unlock(&desc->lock); -} - #ifdef CONFIG_PPC_ISERIES void do_IRQ(struct pt_regs *regs) { @@ -310,8 +237,11 @@ void do_IRQ(struct pt_regs *regs) void do_IRQ(struct pt_regs *regs) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif - irq_enter(); + irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 2KB free? */ @@ -328,20 +258,44 @@ void do_IRQ(struct pt_regs *regs) } #endif + /* + * Every platform is required to implement ppc_md.get_irq. + * This function will either return an irq number or -1 to + * indicate there are no more pending. + * The value -2 is for buggy hardware and means that this IRQ + * has already been handled. -- Tom + */ irq = ppc_md.get_irq(regs); - if (irq >= 0) - ppc_irq_dispatch_handler(regs, irq); - else - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - - irq_exit(); + if (irq >= 0) { +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regs, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regs); + } else +#ifdef CONFIG_PPC32 + if (irq != -2) +#endif + /* That's not SMP safe ... but who cares ? */ + ppc_spurious_interrupts++; + irq_exit(); } + #endif /* CONFIG_PPC_ISERIES */ void __init init_IRQ(void) { +#ifdef CONFIG_PPC64 static int once = 0; if (once) @@ -349,10 +303,14 @@ void __init init_IRQ(void) once++; +#endif ppc_md.init_IRQ(); +#ifdef CONFIG_PPC64 irq_ctx_init(); +#endif } +#ifdef CONFIG_PPC64 #ifndef CONFIG_PPC_ISERIES /* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. @@ -517,3 +475,4 @@ static int __init setup_noirqdistrib(char *str) } __setup("noirqdistrib", setup_noirqdistrib); +#endif /* CONFIG_PPC64 */ diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 3e7b2f28ec8..1b3ba8a440a 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,6 +35,7 @@ #include <asm/time.h> #include <asm/iseries/it_exp_vpd_panel.h> #include <asm/prom.h> +#include <asm/vdso_datapage.h> #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" @@ -42,7 +43,7 @@ /* #define LPARCFG_DEBUG */ /* find a better place for this function... */ -void log_plpar_hcall_return(unsigned long rc, char *tag) +static void log_plpar_hcall_return(unsigned long rc, char *tag) { if (rc == 0) /* success, return */ return; @@ -96,7 +97,7 @@ static unsigned long get_purr(void) #define lparcfg_write NULL -/* +/* * Methods used to fetch LPAR data when running on an iSeries platform. */ static int lparcfg_data(struct seq_file *m, void *v) @@ -168,7 +169,7 @@ static int lparcfg_data(struct seq_file *m, void *v) #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_PSERIES -/* +/* * Methods used to fetch LPAR data when running on a pSeries platform. */ @@ -177,7 +178,7 @@ static int lparcfg_data(struct seq_file *m, void *v) * entitled_capacity,unallocated_capacity, * aggregation, resource_capability). * - * R4 = Entitled Processor Capacity Percentage. + * R4 = Entitled Processor Capacity Percentage. * R5 = Unallocated Processor Capacity Percentage. * R6 (AABBCCDDEEFFGGHH). * XXXX - reserved (0) @@ -190,7 +191,7 @@ static int lparcfg_data(struct seq_file *m, void *v) * XX - variable processor Capacity Weight * XX - Unallocated Variable Processor Capacity Weight. * XXXX - Active processors in Physical Processor Pool. - * XXXX - Processors active on platform. + * XXXX - Processors active on platform. */ static unsigned int h_get_ppp(unsigned long *entitled, unsigned long *unallocated, @@ -212,11 +213,10 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) unsigned long dummy; rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy); - log_plpar_hcall_return(rc, "H_PIC"); + if (rc != H_Authority) + log_plpar_hcall_return(rc, "H_PIC"); } -static unsigned long get_purr(void); - /* Track sum of all purrs across all processors. This is used to further */ /* calculate usage values by different applications */ @@ -273,7 +273,7 @@ static void parse_system_parameter_string(struct seq_file *m) if (!workbuffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", __FILE__, __FUNCTION__, __LINE__); - kfree(local_buffer); + kfree(local_buffer); return; } #ifdef LPARCFG_DEBUG @@ -318,8 +318,6 @@ static void parse_system_parameter_string(struct seq_file *m) kfree(local_buffer); } -static int lparcfg_count_active_processors(void); - /* Return the number of processors in the system. * This function reads through the device tree and counts * the virtual processors, this does not include threads. @@ -371,7 +369,7 @@ static int lparcfg_data(struct seq_file *m, void *v) lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); if (lrdrp == NULL) { - partition_potential_processors = systemcfg->processorCount; + partition_potential_processors = vdso_data->processorCount; } else { partition_potential_processors = *(lrdrp + 4); } @@ -547,7 +545,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } - out: +out: kfree(kbuf); return retval; } @@ -560,10 +558,10 @@ static int lparcfg_open(struct inode *inode, struct file *file) } struct file_operations lparcfg_fops = { - .owner = THIS_MODULE, - .read = seq_read, - .open = lparcfg_open, - .release = single_release, + .owner = THIS_MODULE, + .read = seq_read, + .open = lparcfg_open, + .release = single_release, }; int __init lparcfg_init(void) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 3bedb532aed..f6d84a75ed2 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * * flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) @@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range) sync /* wait for dcbi's to get to ram */ blr -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * 40x cores have 8K or 16K dcache and 32 byte line size. - * 44x has a 32K dcache and 32 byte line size. - * 8xx has 1, 2, 4, 8K variants. - * For now, cover the worst case of the 44x. - * Must be called with external interrupts disabled. - */ -#define CACHE_NWAYS 64 -#define CACHE_NLINES 16 - -_GLOBAL(flush_dcache_all) - li r4, (2 * CACHE_NWAYS * CACHE_NLINES) - mtctr r4 - lis r5, KERNELBASE@h -1: lwz r3, 0(r5) /* Load one word from every line */ - addi r5, r5, L1_CACHE_BYTES - bdnz 1b - blr -#endif /* CONFIG_NOT_COHERENT_CACHE */ - /* * Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index ae1433da09b..ae48a002f81 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 diff --git a/arch/ppc64/kernel/pacaData.c b/arch/powerpc/kernel/paca.c index 3133c72b28e..a7b68f911eb 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/powerpc/kernel/paca.c @@ -15,24 +15,16 @@ #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/page.h> - #include <asm/lppaca.h> #include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> -static union { - struct systemcfg data; - u8 page[PAGE_SIZE]; -} systemcfg_store __attribute__((__section__(".data.page.aligned"))); -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); - /* This symbol is provided by the linker - let it fill in the paca * field correctly */ extern unsigned long __toc_start; -/* The Paca is an array with one entry per processor. Each contains an +/* The Paca is an array with one entry per processor. Each contains an * lppaca, which contains the information shared between the * hypervisor and Linux. Each also contains an ItLpRegSave area which * is used by the hypervisor to save registers. diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 47d6f7e2ea9..5dcf4ba05ee 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -44,6 +44,7 @@ #include <asm/cputable.h> #include <asm/btext.h> #include <asm/div64.h> +#include <asm/signal.h> #ifdef CONFIG_8xx #include <asm/commproc.h> @@ -56,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); @@ -188,9 +188,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32) -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); #endif diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c index 24e955ee948..7ba42a405f4 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -1,18 +1,16 @@ /* - * arch/ppc64/kernel/proc_ppc64.c - * * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -25,7 +23,7 @@ #include <linux/slab.h> #include <linux/kernel.h> -#include <asm/systemcfg.h> +#include <asm/vdso_datapage.h> #include <asm/rtas.h> #include <asm/uaccess.h> #include <asm/prom.h> @@ -53,7 +51,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_CELL))) + if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) return 0; if (!proc_mkdir("rtas", root)) @@ -74,7 +72,7 @@ static int __init proc_ppc64_init(void) if (!pde) return 1; pde->nlink = 1; - pde->data = systemcfg; + pde->data = vdso_data; pde->size = PAGE_SIZE; pde->proc_fops = &page_map_fops; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index f645adb5753..6a5b468edb4 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -48,9 +48,6 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> -#ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> -#endif #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) @@ -74,10 +71,6 @@ struct isa_reg_property { typedef int interpret_func(struct device_node *, unsigned long *, int, int, int); -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; - static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; @@ -391,7 +384,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, #ifdef CONFIG_PPC64 /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -1087,9 +1080,9 @@ void __init unflatten_device_tree(void) static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); u32 *prop; - unsigned long size = 0; + unsigned long size; + char *type = of_get_flat_dt_prop(node, "device_type", &size); /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) @@ -1115,7 +1108,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, #ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", &size); + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); if (prop && (*prop) > 0) { cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; @@ -1161,13 +1154,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node, prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; -#ifdef CONFIG_PPC64 - systemcfg->platform = *prop; -#else #ifdef CONFIG_PPC_MULTIPLATFORM _machine = *prop; #endif -#endif #ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ @@ -1264,7 +1253,14 @@ static int __init early_init_dt_scan_memory(unsigned long node, unsigned long l; /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) return 0; reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); @@ -1339,9 +1335,6 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); -#ifdef CONFIG_PPC64 - systemcfg->physicalMemorySize = lmb_phys_mem_size(); -#endif lmb_reserve(0, __pa(klimit)); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); @@ -1908,7 +1901,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ @@ -1992,9 +1985,11 @@ int prom_add_property(struct device_node* np, struct property* prop) *next = prop; write_unlock(&devtree_lock); +#ifdef CONFIG_PROC_DEVICETREE /* try to add to proc as well if it was initialized */ if (np->pde) proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ return 0; } diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 6dc33d19fc2..4ce0105c308 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -94,11 +94,17 @@ extern const struct linux_logo logo_linux_clut224; #ifdef CONFIG_PPC64 #define RELOC(x) (*PTRRELOC(&(x))) #define ADDR(x) (u32) add_reloc_offset((unsigned long)(x)) +#define OF_WORKAROUNDS 0 #else #define RELOC(x) (x) #define ADDR(x) (u32) (x) +#define OF_WORKAROUNDS of_workarounds +int of_workarounds; #endif +#define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */ +#define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */ + #define PROM_BUG() do { \ prom_printf("kernel BUG at %s line 0x%x!\n", \ RELOC(__FILE__), __LINE__); \ @@ -111,11 +117,6 @@ extern const struct linux_logo logo_linux_clut224; #define prom_debug(x...) #endif -#ifdef CONFIG_PPC32 -#define PLATFORM_POWERMAC _MACH_Pmac -#define PLATFORM_CHRP _MACH_chrp -#endif - typedef u32 prom_arg_t; @@ -128,10 +129,11 @@ struct prom_args { struct prom_t { ihandle root; - ihandle chosen; + phandle chosen; int cpu; ihandle stdout; ihandle mmumap; + ihandle memory; }; struct mem_map_entry { @@ -360,16 +362,36 @@ static void __init prom_printf(const char *format, ...) static unsigned int __init prom_claim(unsigned long virt, unsigned long size, unsigned long align) { - int ret; struct prom_t *_prom = &RELOC(prom); - ret = call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); - if (ret != -1 && _prom->mmumap != 0) - /* old pmacs need us to map as well */ + if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) { + /* + * Old OF requires we claim physical and virtual separately + * and then map explicitly (assuming virtual mode) + */ + int ret; + prom_arg_t result; + + ret = call_prom_ret("call-method", 5, 2, &result, + ADDR("claim"), _prom->memory, + align, size, virt); + if (ret != 0 || result == -1) + return -1; + ret = call_prom_ret("call-method", 5, 2, &result, + ADDR("claim"), _prom->mmumap, + align, size, virt); + if (ret != 0) { + call_prom("call-method", 4, 1, ADDR("release"), + _prom->memory, size, virt); + return -1; + } + /* the 0x12 is M (coherence) + PP == read/write */ call_prom("call-method", 6, 1, - ADDR("map"), _prom->mmumap, 0, size, virt, virt); - return ret; + ADDR("map"), _prom->mmumap, 0x12, size, virt, virt); + return virt; + } + return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, + (prom_arg_t)align); } static void __init __attribute__((noreturn)) prom_panic(const char *reason) @@ -415,11 +437,52 @@ static int inline prom_getproplen(phandle node, const char *pname) return call_prom("getproplen", 2, 1, node, ADDR(pname)); } -static int inline prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) +static void add_string(char **str, const char *q) { - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); + char *p = *str; + + while (*q) + *p++ = *q++; + *p++ = ' '; + *str = p; +} + +static char *tohex(unsigned int x) +{ + static char digits[] = "0123456789abcdef"; + static char result[9]; + int i; + + result[8] = 0; + i = 8; + do { + --i; + result[i] = digits[x & 0xf]; + x >>= 4; + } while (x != 0 && i > 0); + return &result[i]; +} + +static int __init prom_setprop(phandle node, const char *nodename, + const char *pname, void *value, size_t valuelen) +{ + char cmd[256], *p; + + if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL)) + return call_prom("setprop", 4, 1, node, ADDR(pname), + (u32)(unsigned long) value, (u32) valuelen); + + /* gah... setprop doesn't work on longtrail, have to use interpret */ + p = cmd; + add_string(&p, "dev"); + add_string(&p, nodename); + add_string(&p, tohex((u32)(unsigned long) value)); + add_string(&p, tohex(valuelen)); + add_string(&p, tohex(ADDR(pname))); + add_string(&p, tohex(strlen(RELOC(pname)))); + add_string(&p, "property"); + *p = 0; + return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } /* We can't use the standard versions because of RELOC headaches. */ @@ -980,7 +1043,7 @@ static void __init prom_instantiate_rtas(void) rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); + prom_printf("opening rtas package failed (%x)\n", rtas_inst); return; } @@ -988,7 +1051,7 @@ static void __init prom_instantiate_rtas(void) if (call_prom_ret("call-method", 3, 2, &entry, ADDR("instantiate-rtas"), - rtas_inst, base) == PROM_ERROR + rtas_inst, base) != 0 || entry == 0) { prom_printf(" failed\n"); return; @@ -997,8 +1060,10 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "/rtas", "linux,rtas-base", + &base, sizeof(base)); + prom_setprop(rtas_node, "/rtas", "linux,rtas-entry", + &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1089,10 +1154,6 @@ static void __init prom_initialize_tce_table(void) if (base < local_alloc_bottom) local_alloc_bottom = base; - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - /* It seems OF doesn't null-terminate the path :-( */ memset(path, 0, sizeof(path)); /* Call OF to setup the TCE hardware */ @@ -1101,6 +1162,10 @@ static void __init prom_initialize_tce_table(void) prom_printf("package-to-path failed\n"); } + /* Save away the TCE table attributes for later use. */ + prom_setprop(node, path, "linux,tce-base", &base, sizeof(base)); + prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize)); + prom_debug("TCE table: %s\n", path); prom_debug("\tnode = 0x%x\n", node); prom_debug("\tbase = 0x%x\n", base); @@ -1342,6 +1407,7 @@ static void __init prom_init_client_services(unsigned long pp) /* * For really old powermacs, we need to map things we claim. * For that, we need the ihandle of the mmu. + * Also, on the longtrail, we need to work around other bugs. */ static void __init prom_find_mmu(void) { @@ -1355,12 +1421,19 @@ static void __init prom_find_mmu(void) if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0) return; version[sizeof(version) - 1] = 0; - prom_printf("OF version is '%s'\n", version); /* XXX might need to add other versions here */ - if (strcmp(version, "Open Firmware, 1.0.5") != 0) + if (strcmp(version, "Open Firmware, 1.0.5") == 0) + of_workarounds = OF_WA_CLAIM; + else if (strncmp(version, "FirmWorks,3.", 12) == 0) { + of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL; + call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim"); + } else return; + _prom->memory = call_prom("open", 1, 1, ADDR("/memory")); prom_getprop(_prom->chosen, "mmu", &_prom->mmumap, sizeof(_prom->mmumap)); + if (!IHANDLE_VALID(_prom->memory) || !IHANDLE_VALID(_prom->mmumap)) + of_workarounds &= ~OF_WA_CLAIM; /* hmmm */ } #else #define prom_find_mmu() @@ -1382,16 +1455,17 @@ static void __init prom_init_stdout(void) memset(path, 0, 256); call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,stdout-package", + &val, sizeof(val)); prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); + prom_setprop(_prom->chosen, "/chosen", "linux,stdout-path", + path, strlen(path) + 1); /* If it's a display, note it */ memset(type, 0, sizeof(type)); prom_getprop(val, "device_type", type, sizeof(type)); if (strcmp(type, RELOC("display")) == 0) - prom_setprop(val, "linux,boot-display", NULL, 0); + prom_setprop(val, path, "linux,boot-display", NULL, 0); } static void __init prom_close_stdin(void) @@ -1514,7 +1588,7 @@ static void __init prom_check_displays(void) /* Success */ prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); + prom_setprop(node, path, "linux,opened", NULL, 0); /* Setup a usable color table when the appropriate * method is available. Should update this to set-colors */ @@ -1884,9 +1958,11 @@ static void __init fixup_device_tree(void) /* interrupt on this revision of u3 is number 0 and level */ interrupts[0] = 0; interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts", + &interrupts, sizeof(interrupts)); parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); + prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent", + &parent, sizeof(parent)); #endif } @@ -1922,11 +1998,11 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4) RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; val = RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, - sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,initrd-start", + &val, sizeof(val)); val = RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, - sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,initrd-end", + &val, sizeof(val)); reserve_mem(RELOC(prom_initrd_start), RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); @@ -1969,14 +2045,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_init_client_services(pp); /* - * Init prom stdout device + * See if this OF is old enough that we need to do explicit maps + * and other workarounds */ - prom_init_stdout(); + prom_find_mmu(); /* - * See if this OF is old enough that we need to do explicit maps + * Init prom stdout device */ - prom_find_mmu(); + prom_init_stdout(); /* * Check for an initrd @@ -1989,14 +2066,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ RELOC(of_platform) = prom_find_machine_type(); getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", + prom_setprop(_prom->chosen, "/chosen", "linux,platform", &getprop_rval, sizeof(getprop_rval)); #ifdef CONFIG_PPC_PSERIES /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); #endif @@ -2050,21 +2128,23 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * Fill in some infos for use by the kernel later on */ if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", + prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", &RELOC(prom_memory_limit), sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); + prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", + NULL, 0); if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); + prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on", + NULL, 0); if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", + prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-start", &RELOC(prom_tce_alloc_start), sizeof(prom_tce_alloc_start)); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", + prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-end", &RELOC(prom_tce_alloc_end), sizeof(prom_tce_alloc_end)); } @@ -2081,8 +2161,13 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_printf("copying OF device tree ...\n"); flatten_device_tree(); - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); + /* + * in case stdin is USB and still active on IBM machines... + * Unfortunately quiesce crashes on some powermacs if we have + * closed stdin already (in particular the powerbook 101). + */ + if (RELOC(of_platform) != PLATFORM_POWERMAC) + prom_close_stdin(); /* * Call OF "quiesce" method to shut down pending DMA's from diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 5bdd5b079d9..7a95b8a2835 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -32,7 +32,6 @@ #include <asm/rtas.h> #include <asm/machdep.h> /* for ppc_md */ #include <asm/time.h> -#include <asm/systemcfg.h> /* Token for Sensors */ #define KEY_SWITCH 0x0001 @@ -259,7 +258,7 @@ static int __init proc_rtas_init(void) { struct proc_dir_entry *entry; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR) return 1; rtas_node = of_find_node_by_name(NULL, "rtas"); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 9d4e07f6f1e..4283fa33f78 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -29,9 +29,6 @@ #include <asm/delay.h> #include <asm/uaccess.h> #include <asm/lmb.h> -#ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> -#endif struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED @@ -671,7 +668,7 @@ void __init rtas_initialize(void) * the stop-self token if any */ #ifdef CONFIG_PPC64 - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (_machine == PLATFORM_PSERIES_LPAR) rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); #endif rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 3c3f19192fc..0e5a8e11665 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -5,19 +5,19 @@ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * * RTAS specific routines for PCI. - * + * * Based on code from pci.c, chrp_pci.c and pSeries_pci.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -47,7 +47,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct pci_dn *dn, int where) +static inline int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -72,16 +72,14 @@ static int of_device_available(struct device_node * dn) return 0; } -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -90,7 +88,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); + addr, BUID_HI(buid), BUID_LO(buid), size); } else { ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); } @@ -100,7 +98,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va return PCIBIOS_DEVICE_NOT_FOUND; if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (dn, NULL)) + eeh_dn_check_failure (pdn->node, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -118,23 +116,23 @@ static int rtas_pci_read_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_read_config(dn, where, size, val); + return rtas_read_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } -int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) { unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -142,7 +140,8 @@ int rtas_write_config(struct device_node *dn, int where, int size, u32 val) (pdn->devfn << 8) | (where & 0xff); buid = pdn->phb->buid; if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, + BUID_HI(buid), BUID_LO(buid), size, (ulong) val); } else { ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); } @@ -165,10 +164,12 @@ static int rtas_pci_write_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_write_config(dn, where, size, val); + return rtas_write_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } @@ -221,7 +222,7 @@ static void python_countermeasures(struct device_node *dev, /* Python's register file is 1 MB in size. */ chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - /* + /* * Firmware doesn't always clear this bit which is critical * for good performance - Anton */ @@ -292,7 +293,7 @@ static int phb_set_bus_ranges(struct device_node *dev, if (bus_range == NULL || len < 2 * sizeof(int)) { return 1; } - + phb->first_busno = bus_range[0]; phb->last_busno = bus_range[1]; diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index e22856ecb5a..33e7f2c7f19 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -33,6 +33,7 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> +#include <asm/vdso_datapage.h> #include <asm/pgtable.h> #include <asm/smp.h> #include <asm/elf.h> @@ -51,6 +52,9 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> +#include <asm/xmon.h> + +#include "setup.h" #undef DEBUG @@ -60,6 +64,13 @@ #define DBG(fmt...) #endif +#ifdef CONFIG_PPC_MULTIPLATFORM +int _machine = 0; +EXPORT_SYMBOL(_machine); +#endif + +unsigned long klimit = (unsigned long) _end; + /* * This still seems to be needed... -- paulus */ @@ -433,10 +444,8 @@ void __init check_for_initrd(void) if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && initrd_end > initrd_start) ROOT_DEV = Root_RAM0; - else { - printk("Bogus initrd %08lx %08lx\n", initrd_start, initrd_end); + else initrd_start = initrd_end = 0; - } if (initrd_start) printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); @@ -510,8 +519,8 @@ void __init smp_setup_cpu_maps(void) * On pSeries LPAR, we need to know how many cpus * could possibly be added to this partition. */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { + if (_machine == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { int num_addr_cell, num_size_cell, maxcpus; unsigned int *ireg; @@ -555,7 +564,27 @@ void __init smp_setup_cpu_maps(void) cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); } - systemcfg->processorCount = num_present_cpus(); + vdso_data->processorCount = num_present_cpus(); #endif /* CONFIG_PPC64 */ } #endif /* CONFIG_SMP */ + +#ifdef CONFIG_XMON +static int __init early_xmon(char *p) +{ + /* ensure xmon is enabled */ + if (p) { + if (strncmp(p, "on", 2) == 0) + xmon_init(1); + if (strncmp(p, "off", 3) == 0) + xmon_init(0); + if (strncmp(p, "early", 5) != 0) + return 0; + } + xmon_init(1); + debugger(NULL); + + return 0; +} +early_param("xmon", early_xmon); +#endif diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h new file mode 100644 index 00000000000..2ebba755272 --- /dev/null +++ b/arch/powerpc/kernel/setup.h @@ -0,0 +1,6 @@ +#ifndef _POWERPC_KERNEL_SETUP_H +#define _POWERPC_KERNEL_SETUP_H + +void check_for_initrd(void); + +#endif /* _POWERPC_KERNEL_SETUP_H */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 3af2631e3fa..c98cfcc9cd9 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -40,6 +40,8 @@ #include <asm/xmon.h> #include <asm/time.h> +#include "setup.h" + #define DBG(fmt...) #if defined CONFIG_KGDB @@ -70,8 +72,6 @@ unsigned int DMA_MODE_WRITE; int have_of = 1; #ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; - extern void prep_init(void); extern void pmac_init(void); extern void chrp_init(void); @@ -279,7 +279,6 @@ arch_initcall(ppc_init); /* Warning, IO base is not yet inited */ void __init setup_arch(char **cmdline_p) { - extern char *klimit; extern void do_init_bootmem(void); /* so udelay does something sensible, assume <= 1000 bogomips */ @@ -303,14 +302,9 @@ void __init setup_arch(char **cmdline_p) pmac_feature_init(); /* New cool way */ #endif -#ifdef CONFIG_XMON - xmon_map_scc(); - if (strstr(cmd_line, "xmon")) { - xmon_init(1); - debugger(NULL); - } -#endif /* CONFIG_XMON */ - if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab); +#ifdef CONFIG_XMON_DEFAULT + xmon_init(1); +#endif #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) @@ -343,7 +337,7 @@ void __init setup_arch(char **cmdline_p) init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) klimit; + init_mm.brk = klimit; /* Save unparsed command line copy for /proc/cmdline */ strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 0471e843b6c..fdbd9f9122f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -57,10 +57,11 @@ #include <asm/lmb.h> #include <asm/iseries/it_lp_naca.h> #include <asm/firmware.h> -#include <asm/systemcfg.h> #include <asm/xmon.h> #include <asm/udbg.h> +#include "setup.h" + #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else @@ -94,15 +95,6 @@ extern void udbg_init_maple_realmode(void); do { udbg_putc = call_rtas_display_status_delay; } while(0) #endif -/* extern void *stab; */ -extern unsigned long klimit; - -extern void mm_init_ppc64(void); -extern void stab_initialize(unsigned long stab); -extern void htab_initialize(void); -extern void early_init_devtree(void *flat_dt); -extern void unflatten_device_tree(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -254,11 +246,10 @@ void __init early_setup(unsigned long dt_ptr) * Iterate all ppc_md structures until we find the proper * one for the current machine type */ - DBG("Probing machine type for platform %x...\n", - systemcfg->platform); + DBG("Probing machine type for platform %x...\n", _machine); for (mach = machines; *mach; mach++) { - if ((*mach)->probe(systemcfg->platform)) + if ((*mach)->probe(_machine)) break; } /* What can we do if we didn't find ? */ @@ -290,6 +281,28 @@ void __init early_setup(unsigned long dt_ptr) DBG(" <- early_setup()\n"); } +#ifdef CONFIG_SMP +void early_setup_secondary(void) +{ + struct paca_struct *lpaca = get_paca(); + + /* Mark enabled in PACA */ + lpaca->proc_enabled = 0; + + /* Initialize hash table for that CPU */ + htab_initialize_secondary(); + + /* Initialize STAB/SLB. We use a virtual address as it works + * in real mode on pSeries and we want a virutal address on + * iSeries anyway + */ + if (cpu_has_feature(CPU_FTR_SLB)) + slb_initialize(); + else + stab_initialize(lpaca->stab_addr); +} + +#endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) void smp_release_cpus(void) @@ -315,7 +328,8 @@ void smp_release_cpus(void) #endif /* CONFIG_SMP || CONFIG_KEXEC */ /* - * Initialize some remaining members of the ppc64_caches and systemcfg structures + * Initialize some remaining members of the ppc64_caches and systemcfg + * structures * (at least until we get rid of them completely). This is mostly some * cache informations about the CPU that will be used by cache flush * routines and/or provided to userland @@ -340,7 +354,7 @@ static void __init initialize_cache_info(void) const char *dc, *ic; /* Then read cache informations */ - if (systemcfg->platform == PLATFORM_POWERMAC) { + if (_machine == PLATFORM_POWERMAC) { dc = "d-cache-block-size"; ic = "i-cache-block-size"; } else { @@ -360,9 +374,8 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find dcache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->dcache_size = ppc64_caches.dsize = size; - systemcfg->dcache_line_size = - ppc64_caches.dline_size = lsize; + ppc64_caches.dsize = size; + ppc64_caches.dline_size = lsize; ppc64_caches.log_dline_size = __ilog2(lsize); ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; @@ -378,20 +391,13 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find icache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->icache_size = ppc64_caches.isize = size; - systemcfg->icache_line_size = - ppc64_caches.iline_size = lsize; + ppc64_caches.isize = size; + ppc64_caches.iline_size = lsize; ppc64_caches.log_iline_size = __ilog2(lsize); ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; } } - /* Add an eye catcher and the systemcfg layout version number */ - strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); - systemcfg->version.major = SYSTEMCFG_MAJOR; - systemcfg->version.minor = SYSTEMCFG_MINOR; - systemcfg->processor = mfspr(SPRN_PVR); - DBG(" <- initialize_cache_info()\n"); } @@ -478,15 +484,14 @@ void __init setup_system(void) printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); - printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); - printk("systemcfg = 0x%p\n", systemcfg); - printk("systemcfg->platform = 0x%x\n", systemcfg->platform); - printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount); - printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize); + printk("ppc64_interrupt_controller = 0x%ld\n", + ppc64_interrupt_controller); + printk("platform = 0x%x\n", _machine); + printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size()); printk("ppc64_caches.dcache_line_size = 0x%x\n", - ppc64_caches.dline_size); + ppc64_caches.dline_size); printk("ppc64_caches.icache_line_size = 0x%x\n", - ppc64_caches.iline_size); + ppc64_caches.iline_size); printk("htab_address = 0x%p\n", htab_address); printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); printk("-----------------------------------------------------\n"); @@ -551,33 +556,6 @@ static void __init emergency_stack_init(void) } /* - * Called from setup_arch to initialize the bitmap of available - * syscalls in the systemcfg page - */ -void __init setup_syscall_map(void) -{ - unsigned int i, count64 = 0, count32 = 0; - extern unsigned long *sys_call_table; - extern unsigned long sys_ni_syscall; - - - for (i = 0; i < __NR_syscalls; i++) { - if (sys_call_table[i*2] != sys_ni_syscall) { - count64++; - systemcfg->syscall_map_64[i >> 5] |= - 0x80000000UL >> (i & 0x1f); - } - if (sys_call_table[i*2+1] != sys_ni_syscall) { - count32++; - systemcfg->syscall_map_32[i >> 5] |= - 0x80000000UL >> (i & 0x1f); - } - } - printk(KERN_INFO "Syscall map setup, %d 32-bit and %d 64-bit syscalls\n", - count32, count64); -} - -/* * Called into from start_kernel, after lock_kernel has been called. * Initializes bootmem, which is unsed to manage page allocation until * mem_init is called. @@ -618,9 +596,6 @@ void __init setup_arch(char **cmdline_p) do_init_bootmem(); sparse_init(); - /* initialize the syscall map in systemcfg */ - setup_syscall_map(); - #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif @@ -858,26 +833,6 @@ int check_legacy_ioport(unsigned long base_port) } EXPORT_SYMBOL(check_legacy_ioport); -#ifdef CONFIG_XMON -static int __init early_xmon(char *p) -{ - /* ensure xmon is enabled */ - if (p) { - if (strncmp(p, "on", 2) == 0) - xmon_init(1); - if (strncmp(p, "off", 3) == 0) - xmon_init(0); - if (strncmp(p, "early", 5) != 0) - return 0; - } - xmon_init(1); - debugger(NULL); - - return 0; -} -early_param("xmon", early_xmon); -#endif - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 081d931eae4..8bdf95b7e42 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -42,10 +42,11 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> +#include <asm/sigcontext.h> +#include <asm/vdso.h> #ifdef CONFIG_PPC64 #include "ppc32.h" #include <asm/unistd.h> -#include <asm/vdso.h> #else #include <asm/ucontext.h> #include <asm/pgtable.h> @@ -808,14 +809,11 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, /* Save user registers on the stack */ frame = &rt_sf->uc.uc_mcontext; -#ifdef CONFIG_PPC64 if (vdso32_rt_sigtramp && current->thread.vdso_base) { if (save_user_regs(regs, frame, 0)) goto badframe; regs->link = current->thread.vdso_base + vdso32_rt_sigtramp; - } else -#endif - { + } else { if (save_user_regs(regs, frame, __NR_rt_sigreturn)) goto badframe; regs->link = (unsigned long) frame->tramp; @@ -1089,14 +1087,11 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, || __put_user(sig, &sc->signal)) goto badframe; -#ifdef CONFIG_PPC64 if (vdso32_sigtramp && current->thread.vdso_base) { if (save_user_regs(regs, &frame->mctx, 0)) goto badframe; regs->link = current->thread.vdso_base + vdso32_sigtramp; - } else -#endif - { + } else { if (save_user_regs(regs, &frame->mctx, __NR_sigreturn)) goto badframe; regs->link = (unsigned long) frame->mctx.tramp; diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 5c330c3366e..62dfc5b8d76 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -44,6 +44,7 @@ #include <asm/cputable.h> #include <asm/system.h> #include <asm/mpic.h> +#include <asm/vdso_datapage.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> #endif @@ -368,9 +369,11 @@ int generic_cpu_disable(void) if (cpu == boot_cpuid) return -EBUSY; - systemcfg->processorCount--; cpu_clear(cpu, cpu_online_map); +#ifdef CONFIG_PPC64 + vdso_data->processorCount--; fixup_irqs(cpu_online_map); +#endif return 0; } @@ -388,9 +391,11 @@ int generic_cpu_enable(unsigned int cpu) while (!cpu_online(cpu)) cpu_relax(); +#ifdef CONFIG_PPC64 fixup_irqs(cpu_online_map); /* counter the irq disable in fixup_irqs */ local_irq_enable(); +#endif return 0; } @@ -419,7 +424,9 @@ void generic_mach_cpu_die(void) while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE) cpu_relax(); +#ifdef CONFIG_PPC64 flush_tlb_pending(); +#endif cpu_set(cpu, cpu_online_map); local_irq_enable(); } @@ -510,6 +517,7 @@ int __devinit start_secondary(void *unused) smp_store_cpu_info(cpu); set_dec(tb_ticks_per_jiffy); + preempt_disable(); cpu_callin_map[cpu] = 1; smp_ops->setup_cpu(cpu); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index a8210ed5c68..9c921d1c408 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -52,7 +52,6 @@ #include <asm/semaphore.h> #include <asm/time.h> #include <asm/mmu_context.h> -#include <asm/systemcfg.h> #include <asm/ppc-pci.h> /* readdir & getdents */ diff --git a/arch/ppc64/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index e99ec62c2c5..0f0c3a9ae2e 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -16,7 +16,6 @@ #include <asm/firmware.h> #include <asm/hvcall.h> #include <asm/prom.h> -#include <asm/systemcfg.h> #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/machdep.h> @@ -232,7 +231,7 @@ static void register_cpu_online(unsigned int cpu) sysdev_create_file(s, &attr_pmc7); if (cur_cpu_spec->num_pmcs >= 8) sysdev_create_file(s, &attr_pmc8); - + if (cpu_has_feature(CPU_FTR_SMT)) sysdev_create_file(s, &attr_purr); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index a6282b625b4..070b4b458aa 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -62,8 +62,8 @@ #include <asm/irq.h> #include <asm/div64.h> #include <asm/smp.h> +#include <asm/vdso_datapage.h> #ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> #include <asm/firmware.h> #endif #ifdef CONFIG_PPC_ISERIES @@ -261,7 +261,6 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, do_gtod.varp = temp_varp; do_gtod.var_idx = temp_idx; -#ifdef CONFIG_PPC64 /* * tb_update_count is used to allow the userspace gettimeofday code * to assure itself that it sees a consistent view of the tb_to_xs and @@ -271,14 +270,15 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. */ - ++(systemcfg->tb_update_count); + ++(vdso_data->tb_update_count); smp_wmb(); - systemcfg->tb_orig_stamp = new_tb_stamp; - systemcfg->stamp_xsec = new_stamp_xsec; - systemcfg->tb_to_xs = new_tb_to_xs; + vdso_data->tb_orig_stamp = new_tb_stamp; + vdso_data->stamp_xsec = new_stamp_xsec; + vdso_data->tb_to_xs = new_tb_to_xs; + vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; + vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; smp_wmb(); - ++(systemcfg->tb_update_count); -#endif + ++(vdso_data->tb_update_count); } /* @@ -357,8 +357,8 @@ static void iSeries_tb_recal(void) do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; tb_to_xs = divres.result_low; do_gtod.varp->tb_to_xs = tb_to_xs; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->tb_to_xs = tb_to_xs; + vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; + vdso_data->tb_to_xs = tb_to_xs; } else { printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" @@ -483,6 +483,8 @@ void __init smp_space_timers(unsigned int max_cpus) unsigned long offset = tb_ticks_per_jiffy / max_cpus; unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ + previous_tb -= tb_ticks_per_jiffy; for_each_cpu(i) { if (i != boot_cpuid) { previous_tb += offset; @@ -558,10 +560,8 @@ int do_settimeofday(struct timespec *tv) new_xsec += (u64)new_sec * XSEC_PER_SEC - tb_delta_xs; update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs); -#ifdef CONFIG_PPC64 - systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; - systemcfg->tz_dsttime = sys_tz.tz_dsttime; -#endif + vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; + vdso_data->tz_dsttime = sys_tz.tz_dsttime; write_sequnlock_irqrestore(&xtime_lock, flags); clock_was_set(); @@ -710,13 +710,12 @@ void __init time_init(void) do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; do_gtod.tb_to_us = tb_to_us; -#ifdef CONFIG_PPC64 - systemcfg->tb_orig_stamp = tb_last_jiffy; - systemcfg->tb_update_count = 0; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; - systemcfg->tb_to_xs = tb_to_xs; -#endif + + vdso_data->tb_orig_stamp = tb_last_jiffy; + vdso_data->tb_update_count = 0; + vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; + vdso_data->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + vdso_data->tb_to_xs = tb_to_xs; time_freq = 0; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 32f215825e8..1511454c469 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -49,7 +49,6 @@ #ifdef CONFIG_PPC64 #include <asm/firmware.h> #include <asm/processor.h> -#include <asm/systemcfg.h> #endif #ifdef CONFIG_PPC64 /* XXX */ @@ -129,7 +128,7 @@ int die(const char *str, struct pt_regs *regs, long err) nl = 1; #endif #ifdef CONFIG_PPC64 - switch (systemcfg->platform) { + switch (_machine) { case PLATFORM_PSERIES: printk("PSERIES "); nl = 1; @@ -887,10 +886,6 @@ void altivec_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); } -#ifdef CONFIG_PPC64 -extern perf_irq_t perf_irq; -#endif - #if defined(CONFIG_PPC64) || defined(CONFIG_E500) void performance_monitor_exception(struct pt_regs *regs) { diff --git a/arch/ppc64/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 0d878e72fc4..0d878e72fc4 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c diff --git a/arch/ppc64/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 9313574ab93..9313574ab93 100644 --- a/arch/ppc64/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/powerpc/kernel/udbg_scc.c index 820c5355150..820c5355150 100644 --- a/arch/ppc64/kernel/udbg_scc.c +++ b/arch/powerpc/kernel/udbg_scc.c diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c new file mode 100644 index 00000000000..0d4d8bec0df --- /dev/null +++ b/arch/powerpc/kernel/vdso.c @@ -0,0 +1,746 @@ +/* + * linux/arch/ppc64/kernel/vdso.c + * + * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/elf.h> +#include <linux/security.h> +#include <linux/bootmem.h> + +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/mmu_context.h> +#include <asm/lmb.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/sections.h> +#include <asm/vdso.h> +#include <asm/vdso_datapage.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +/* Max supported size for symbol names */ +#define MAX_SYMNAME 64 + +extern char vdso32_start, vdso32_end; +static void *vdso32_kbase = &vdso32_start; +unsigned int vdso32_pages; +unsigned long vdso32_sigtramp; +unsigned long vdso32_rt_sigtramp; + +#ifdef CONFIG_PPC64 +extern char vdso64_start, vdso64_end; +static void *vdso64_kbase = &vdso64_start; +unsigned int vdso64_pages; +unsigned long vdso64_rt_sigtramp; +#endif /* CONFIG_PPC64 */ + +/* + * The vdso data page (aka. systemcfg for old ppc64 fans) is here. + * Once the early boot kernel code no longer needs to muck around + * with it, it will become dynamically allocated + */ +static union { + struct vdso_data data; + u8 page[PAGE_SIZE]; +} vdso_data_store __attribute__((__section__(".data.page_aligned"))); +struct vdso_data *vdso_data = &vdso_data_store.data; + +/* Format of the patch table */ +struct vdso_patch_def +{ + unsigned long ftr_mask, ftr_value; + const char *gen_name; + const char *fix_name; +}; + +/* Table of functions to patch based on the CPU type/revision + * + * Currently, we only change sync_dicache to do nothing on processors + * with a coherent icache + */ +static struct vdso_patch_def vdso_patches[] = { + { + CPU_FTR_COHERENT_ICACHE, CPU_FTR_COHERENT_ICACHE, + "__kernel_sync_dicache", "__kernel_sync_dicache_p5" + }, + { + CPU_FTR_USE_TB, 0, + "__kernel_gettimeofday", NULL + }, +}; + +/* + * Some infos carried around for each of them during parsing at + * boot time. + */ +struct lib32_elfinfo +{ + Elf32_Ehdr *hdr; /* ptr to ELF */ + Elf32_Sym *dynsym; /* ptr to .dynsym section */ + unsigned long dynsymsize; /* size of .dynsym section */ + char *dynstr; /* ptr to .dynstr section */ + unsigned long text; /* offset of .text section in .so */ +}; + +struct lib64_elfinfo +{ + Elf64_Ehdr *hdr; + Elf64_Sym *dynsym; + unsigned long dynsymsize; + char *dynstr; + unsigned long text; +}; + + +#ifdef __DEBUG +static void dump_one_vdso_page(struct page *pg, struct page *upg) +{ + printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT), + page_count(pg), + pg->flags); + if (upg/* && pg != upg*/) { + printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) + << PAGE_SHIFT), + page_count(upg), + upg->flags); + } + printk("\n"); +} + +static void dump_vdso_pages(struct vm_area_struct * vma) +{ + int i; + + if (!vma || test_thread_flag(TIF_32BIT)) { + printk("vDSO32 @ %016lx:\n", (unsigned long)vdso32_kbase); + for (i=0; i<vdso32_pages; i++) { + struct page *pg = virt_to_page(vdso32_kbase + + i*PAGE_SIZE); + struct page *upg = (vma && vma->vm_mm) ? + follow_page(vma->vm_mm, vma->vm_start + + i*PAGE_SIZE, 0) + : NULL; + dump_one_vdso_page(pg, upg); + } + } + if (!vma || !test_thread_flag(TIF_32BIT)) { + printk("vDSO64 @ %016lx:\n", (unsigned long)vdso64_kbase); + for (i=0; i<vdso64_pages; i++) { + struct page *pg = virt_to_page(vdso64_kbase + + i*PAGE_SIZE); + struct page *upg = (vma && vma->vm_mm) ? + follow_page(vma->vm_mm, vma->vm_start + + i*PAGE_SIZE, 0) + : NULL; + dump_one_vdso_page(pg, upg); + } + } +} +#endif /* DEBUG */ + +/* + * Keep a dummy vma_close for now, it will prevent VMA merging. + */ +static void vdso_vma_close(struct vm_area_struct * vma) +{ +} + +/* + * Our nopage() function, maps in the actual vDSO kernel pages, they will + * be mapped read-only by do_no_page(), and eventually COW'ed, either + * right away for an initial write access, or by do_wp_page(). + */ +static struct page * vdso_vma_nopage(struct vm_area_struct * vma, + unsigned long address, int *type) +{ + unsigned long offset = address - vma->vm_start; + struct page *pg; +#ifdef CONFIG_PPC64 + void *vbase = test_thread_flag(TIF_32BIT) ? + vdso32_kbase : vdso64_kbase; +#else + void *vbase = vdso32_kbase; +#endif + + DBG("vdso_vma_nopage(current: %s, address: %016lx, off: %lx)\n", + current->comm, address, offset); + + if (address < vma->vm_start || address > vma->vm_end) + return NOPAGE_SIGBUS; + + /* + * Last page is systemcfg. + */ + if ((vma->vm_end - address) <= PAGE_SIZE) + pg = virt_to_page(vdso_data); + else + pg = virt_to_page(vbase + offset); + + get_page(pg); + DBG(" ->page count: %d\n", page_count(pg)); + + return pg; +} + +static struct vm_operations_struct vdso_vmops = { + .close = vdso_vma_close, + .nopage = vdso_vma_nopage, +}; + +/* + * This is called from binfmt_elf, we create the special vma for the + * vDSO and insert it into the mm struct tree + */ +int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + unsigned long vdso_pages; + unsigned long vdso_base; + +#ifdef CONFIG_PPC64 + if (test_thread_flag(TIF_32BIT)) { + vdso_pages = vdso32_pages; + vdso_base = VDSO32_MBASE; + } else { + vdso_pages = vdso64_pages; + vdso_base = VDSO64_MBASE; + } +#else + vdso_pages = vdso32_pages; + vdso_base = VDSO32_MBASE; +#endif + + current->thread.vdso_base = 0; + + /* vDSO has a problem and was disabled, just don't "enable" it for the + * process + */ + if (vdso_pages == 0) + return 0; + + vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); + if (vma == NULL) + return -ENOMEM; + + memset(vma, 0, sizeof(*vma)); + + /* Add a page to the vdso size for the data page */ + vdso_pages ++; + + /* + * pick a base address for the vDSO in process space. We try to put it + * at vdso_base which is the "natural" base for it, but we might fail + * and end up putting it elsewhere. + */ + vdso_base = get_unmapped_area(NULL, vdso_base, + vdso_pages << PAGE_SHIFT, 0, 0); + if (vdso_base & ~PAGE_MASK) { + kmem_cache_free(vm_area_cachep, vma); + return (int)vdso_base; + } + + current->thread.vdso_base = vdso_base; + + vma->vm_mm = mm; + vma->vm_start = current->thread.vdso_base; + vma->vm_end = vma->vm_start + (vdso_pages << PAGE_SHIFT); + + /* + * our vma flags don't have VM_WRITE so by default, the process isn't + * allowed to write those pages. + * gdb can break that with ptrace interface, and thus trigger COW on + * those pages but it's then your responsibility to never do that on + * the "data" page of the vDSO or you'll stop getting kernel updates + * and your nice userland gettimeofday will be totally dead. + * It's fine to use that for setting breakpoints in the vDSO code + * pages though + */ + vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | + VM_MAYEXEC | VM_RESERVED; + vma->vm_flags |= mm->def_flags; + vma->vm_page_prot = protection_map[vma->vm_flags & 0x7]; + vma->vm_ops = &vdso_vmops; + + down_write(&mm->mmap_sem); + if (insert_vm_struct(mm, vma)) { + up_write(&mm->mmap_sem); + kmem_cache_free(vm_area_cachep, vma); + return -ENOMEM; + } + mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + up_write(&mm->mmap_sem); + + return 0; +} + +static void * __init find_section32(Elf32_Ehdr *ehdr, const char *secname, + unsigned long *size) +{ + Elf32_Shdr *sechdrs; + unsigned int i; + char *secnames; + + /* Grab section headers and strings so we can tell who is who */ + sechdrs = (void *)ehdr + ehdr->e_shoff; + secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; + + /* Find the section they want */ + for (i = 1; i < ehdr->e_shnum; i++) { + if (strcmp(secnames+sechdrs[i].sh_name, secname) == 0) { + if (size) + *size = sechdrs[i].sh_size; + return (void *)ehdr + sechdrs[i].sh_offset; + } + } + *size = 0; + return NULL; +} + +static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib, + const char *symname) +{ + unsigned int i; + char name[MAX_SYMNAME], *c; + + for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { + if (lib->dynsym[i].st_name == 0) + continue; + strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + MAX_SYMNAME); + c = strchr(name, '@'); + if (c) + *c = 0; + if (strcmp(symname, name) == 0) + return &lib->dynsym[i]; + } + return NULL; +} + +/* Note that we assume the section is .text and the symbol is relative to + * the library base + */ +static unsigned long __init find_function32(struct lib32_elfinfo *lib, + const char *symname) +{ + Elf32_Sym *sym = find_symbol32(lib, symname); + + if (sym == NULL) { + printk(KERN_WARNING "vDSO32: function %s not found !\n", + symname); + return 0; + } + return sym->st_value - VDSO32_LBASE; +} + +static int vdso_do_func_patch32(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64, + const char *orig, const char *fix) +{ + Elf32_Sym *sym32_gen, *sym32_fix; + + sym32_gen = find_symbol32(v32, orig); + if (sym32_gen == NULL) { + printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig); + return -1; + } + if (fix == NULL) { + sym32_gen->st_name = 0; + return 0; + } + sym32_fix = find_symbol32(v32, fix); + if (sym32_fix == NULL) { + printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix); + return -1; + } + sym32_gen->st_value = sym32_fix->st_value; + sym32_gen->st_size = sym32_fix->st_size; + sym32_gen->st_info = sym32_fix->st_info; + sym32_gen->st_other = sym32_fix->st_other; + sym32_gen->st_shndx = sym32_fix->st_shndx; + + return 0; +} + + +#ifdef CONFIG_PPC64 + +static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname, + unsigned long *size) +{ + Elf64_Shdr *sechdrs; + unsigned int i; + char *secnames; + + /* Grab section headers and strings so we can tell who is who */ + sechdrs = (void *)ehdr + ehdr->e_shoff; + secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; + + /* Find the section they want */ + for (i = 1; i < ehdr->e_shnum; i++) { + if (strcmp(secnames+sechdrs[i].sh_name, secname) == 0) { + if (size) + *size = sechdrs[i].sh_size; + return (void *)ehdr + sechdrs[i].sh_offset; + } + } + if (size) + *size = 0; + return NULL; +} + +static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, + const char *symname) +{ + unsigned int i; + char name[MAX_SYMNAME], *c; + + for (i = 0; i < (lib->dynsymsize / sizeof(Elf64_Sym)); i++) { + if (lib->dynsym[i].st_name == 0) + continue; + strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + MAX_SYMNAME); + c = strchr(name, '@'); + if (c) + *c = 0; + if (strcmp(symname, name) == 0) + return &lib->dynsym[i]; + } + return NULL; +} + +/* Note that we assume the section is .text and the symbol is relative to + * the library base + */ +static unsigned long __init find_function64(struct lib64_elfinfo *lib, + const char *symname) +{ + Elf64_Sym *sym = find_symbol64(lib, symname); + + if (sym == NULL) { + printk(KERN_WARNING "vDSO64: function %s not found !\n", + symname); + return 0; + } +#ifdef VDS64_HAS_DESCRIPTORS + return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) - + VDSO64_LBASE; +#else + return sym->st_value - VDSO64_LBASE; +#endif +} + +static int vdso_do_func_patch64(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64, + const char *orig, const char *fix) +{ + Elf64_Sym *sym64_gen, *sym64_fix; + + sym64_gen = find_symbol64(v64, orig); + if (sym64_gen == NULL) { + printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig); + return -1; + } + if (fix == NULL) { + sym64_gen->st_name = 0; + return 0; + } + sym64_fix = find_symbol64(v64, fix); + if (sym64_fix == NULL) { + printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix); + return -1; + } + sym64_gen->st_value = sym64_fix->st_value; + sym64_gen->st_size = sym64_fix->st_size; + sym64_gen->st_info = sym64_fix->st_info; + sym64_gen->st_other = sym64_fix->st_other; + sym64_gen->st_shndx = sym64_fix->st_shndx; + + return 0; +} + +#endif /* CONFIG_PPC64 */ + + +static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64) +{ + void *sect; + + /* + * Locate symbol tables & text section + */ + + v32->dynsym = find_section32(v32->hdr, ".dynsym", &v32->dynsymsize); + v32->dynstr = find_section32(v32->hdr, ".dynstr", NULL); + if (v32->dynsym == NULL || v32->dynstr == NULL) { + printk(KERN_ERR "vDSO32: required symbol section not found\n"); + return -1; + } + sect = find_section32(v32->hdr, ".text", NULL); + if (sect == NULL) { + printk(KERN_ERR "vDSO32: the .text section was not found\n"); + return -1; + } + v32->text = sect - vdso32_kbase; + +#ifdef CONFIG_PPC64 + v64->dynsym = find_section64(v64->hdr, ".dynsym", &v64->dynsymsize); + v64->dynstr = find_section64(v64->hdr, ".dynstr", NULL); + if (v64->dynsym == NULL || v64->dynstr == NULL) { + printk(KERN_ERR "vDSO64: required symbol section not found\n"); + return -1; + } + sect = find_section64(v64->hdr, ".text", NULL); + if (sect == NULL) { + printk(KERN_ERR "vDSO64: the .text section was not found\n"); + return -1; + } + v64->text = sect - vdso64_kbase; +#endif /* CONFIG_PPC64 */ + + return 0; +} + +static __init void vdso_setup_trampolines(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64) +{ + /* + * Find signal trampolines + */ + +#ifdef CONFIG_PPC64 + vdso64_rt_sigtramp = find_function64(v64, "__kernel_sigtramp_rt64"); +#endif + vdso32_sigtramp = find_function32(v32, "__kernel_sigtramp32"); + vdso32_rt_sigtramp = find_function32(v32, "__kernel_sigtramp_rt32"); +} + +static __init int vdso_fixup_datapage(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64) +{ + Elf32_Sym *sym32; +#ifdef CONFIG_PPC64 + Elf64_Sym *sym64; + + sym64 = find_symbol64(v64, "__kernel_datapage_offset"); + if (sym64 == NULL) { + printk(KERN_ERR "vDSO64: Can't find symbol " + "__kernel_datapage_offset !\n"); + return -1; + } + *((int *)(vdso64_kbase + sym64->st_value - VDSO64_LBASE)) = + (vdso64_pages << PAGE_SHIFT) - + (sym64->st_value - VDSO64_LBASE); +#endif /* CONFIG_PPC64 */ + + sym32 = find_symbol32(v32, "__kernel_datapage_offset"); + if (sym32 == NULL) { + printk(KERN_ERR "vDSO32: Can't find symbol " + "__kernel_datapage_offset !\n"); + return -1; + } + *((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) = + (vdso32_pages << PAGE_SHIFT) - + (sym32->st_value - VDSO32_LBASE); + + return 0; +} + +static __init int vdso_fixup_alt_funcs(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vdso_patches); i++) { + struct vdso_patch_def *patch = &vdso_patches[i]; + int match = (cur_cpu_spec->cpu_features & patch->ftr_mask) + == patch->ftr_value; + if (!match) + continue; + + DBG("replacing %s with %s...\n", patch->gen_name, + patch->fix_name ? "NONE" : patch->fix_name); + + /* + * Patch the 32 bits and 64 bits symbols. Note that we do not + * patch the "." symbol on 64 bits. + * It would be easy to do, but doesn't seem to be necessary, + * patching the OPD symbol is enough. + */ + vdso_do_func_patch32(v32, v64, patch->gen_name, + patch->fix_name); +#ifdef CONFIG_PPC64 + vdso_do_func_patch64(v32, v64, patch->gen_name, + patch->fix_name); +#endif /* CONFIG_PPC64 */ + } + + return 0; +} + + +static __init int vdso_setup(void) +{ + struct lib32_elfinfo v32; + struct lib64_elfinfo v64; + + v32.hdr = vdso32_kbase; +#ifdef CONFIG_PPC64 + v64.hdr = vdso64_kbase; +#endif + if (vdso_do_find_sections(&v32, &v64)) + return -1; + + if (vdso_fixup_datapage(&v32, &v64)) + return -1; + + if (vdso_fixup_alt_funcs(&v32, &v64)) + return -1; + + vdso_setup_trampolines(&v32, &v64); + + return 0; +} + +/* + * Called from setup_arch to initialize the bitmap of available + * syscalls in the systemcfg page + */ +static void __init vdso_setup_syscall_map(void) +{ + unsigned int i; + extern unsigned long *sys_call_table; + extern unsigned long sys_ni_syscall; + + + for (i = 0; i < __NR_syscalls; i++) { +#ifdef CONFIG_PPC64 + if (sys_call_table[i*2] != sys_ni_syscall) + vdso_data->syscall_map_64[i >> 5] |= + 0x80000000UL >> (i & 0x1f); + if (sys_call_table[i*2+1] != sys_ni_syscall) + vdso_data->syscall_map_32[i >> 5] |= + 0x80000000UL >> (i & 0x1f); +#else /* CONFIG_PPC64 */ + if (sys_call_table[i] != sys_ni_syscall) + vdso_data->syscall_map_32[i >> 5] |= + 0x80000000UL >> (i & 0x1f); +#endif /* CONFIG_PPC64 */ + } +} + + +void __init vdso_init(void) +{ + int i; + +#ifdef CONFIG_PPC64 + /* + * Fill up the "systemcfg" stuff for backward compatiblity + */ + strcpy(vdso_data->eye_catcher, "SYSTEMCFG:PPC64"); + vdso_data->version.major = SYSTEMCFG_MAJOR; + vdso_data->version.minor = SYSTEMCFG_MINOR; + vdso_data->processor = mfspr(SPRN_PVR); + vdso_data->platform = _machine; + vdso_data->physicalMemorySize = lmb_phys_mem_size(); + vdso_data->dcache_size = ppc64_caches.dsize; + vdso_data->dcache_line_size = ppc64_caches.dline_size; + vdso_data->icache_size = ppc64_caches.isize; + vdso_data->icache_line_size = ppc64_caches.iline_size; + + /* + * Calculate the size of the 64 bits vDSO + */ + vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT; + DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages); +#endif /* CONFIG_PPC64 */ + + + /* + * Calculate the size of the 32 bits vDSO + */ + vdso32_pages = (&vdso32_end - &vdso32_start) >> PAGE_SHIFT; + DBG("vdso32_kbase: %p, 0x%x pages\n", vdso32_kbase, vdso32_pages); + + + /* + * Setup the syscall map in the vDOS + */ + vdso_setup_syscall_map(); + /* + * Initialize the vDSO images in memory, that is do necessary + * fixups of vDSO symbols, locate trampolines, etc... + */ + if (vdso_setup()) { + printk(KERN_ERR "vDSO setup failure, not enabled !\n"); + vdso32_pages = 0; +#ifdef CONFIG_PPC64 + vdso64_pages = 0; +#endif + return; + } + + /* Make sure pages are in the correct state */ + for (i = 0; i < vdso32_pages; i++) { + struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); + ClearPageReserved(pg); + get_page(pg); + + } +#ifdef CONFIG_PPC64 + for (i = 0; i < vdso64_pages; i++) { + struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); + ClearPageReserved(pg); + get_page(pg); + } +#endif /* CONFIG_PPC64 */ + + get_page(virt_to_page(vdso_data)); +} + +int in_gate_area_no_task(unsigned long addr) +{ + return 0; +} + +int in_gate_area(struct task_struct *task, unsigned long addr) +{ + return 0; +} + +struct vm_area_struct *get_gate_vma(struct task_struct *tsk) +{ + return NULL; +} + diff --git a/arch/ppc64/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 0b1b0df973e..8a3bed5f143 100644 --- a/arch/ppc64/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -5,6 +5,10 @@ obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o # Build rules +ifeq ($(CONFIG_PPC32),y) +CROSS32CC := $(CC) +endif + targets := $(obj-vdso32) vdso32.so obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) @@ -15,7 +19,7 @@ EXTRA_AFLAGS := -D__VDSO32__ -s obj-y += vdso32_wrapper.o extra-y += vdso32.lds -CPPFLAGS_vdso32.lds += -P -C -U$(ARCH) +CPPFLAGS_vdso32.lds += -P -C -Upowerpc # Force dependency (incbin is bad) $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so diff --git a/arch/ppc64/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S index c8db993574e..c8db993574e 100644 --- a/arch/ppc64/kernel/vdso32/cacheflush.S +++ b/arch/powerpc/kernel/vdso32/cacheflush.S diff --git a/arch/ppc64/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index 4f4eb0be399..a08c26e8783 100644 --- a/arch/ppc64/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -66,3 +66,19 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) + +/* + * void unsigned long long __kernel_get_tbfreq(void); + * + * returns the timebase frequency in HZ + */ +V_FUNCTION_BEGIN(__kernel_get_tbfreq) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + bl __get_datapage@local + lwz r3,CFG_TB_TICKS_PER_SEC(r3) + lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) + mtlr r12 + .cfi_endproc +V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S new file mode 100644 index 00000000000..aeb5fc9b87b --- /dev/null +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -0,0 +1,315 @@ +/* + * Userland implementation of gettimeofday() for 32 bits processes in a + * ppc64 kernel for use in the vDSO + * + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org, + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/vdso.h> +#include <asm/asm-offsets.h> +#include <asm/unistd.h> + + .text +/* + * Exact prototype of gettimeofday + * + * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); + * + */ +V_FUNCTION_BEGIN(__kernel_gettimeofday) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + + mr r10,r3 /* r10 saves tv */ + mr r11,r4 /* r11 saves tz */ + bl __get_datapage@local /* get data page */ + mr r9, r3 /* datapage ptr in r9 */ + bl __do_get_xsec@local /* get xsec from tb & kernel */ + bne- 2f /* out of line -> do syscall */ + + /* seconds are xsec >> 20 */ + rlwinm r5,r4,12,20,31 + rlwimi r5,r3,12,0,19 + stw r5,TVAL32_TV_SEC(r10) + + /* get remaining xsec and convert to usec. we scale + * up remaining xsec by 12 bits and get the top 32 bits + * of the multiplication + */ + rlwinm r5,r4,12,0,19 + lis r6,1000000@h + ori r6,r6,1000000@l + mulhwu r5,r5,r6 + stw r5,TVAL32_TV_USEC(r10) + + cmpli cr0,r11,0 /* check if tz is NULL */ + beq 1f + lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */ + lwz r5,CFG_TZ_DSTTIME(r9) + stw r4,TZONE_TZ_MINWEST(r11) + stw r5,TZONE_TZ_DSTTIME(r11) + +1: mtlr r12 + li r3,0 + blr + +2: + mtlr r12 + mr r3,r10 + mr r4,r11 + li r0,__NR_gettimeofday + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_gettimeofday) + +/* + * Exact prototype of clock_gettime() + * + * int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_gettime) + .cfi_startproc + /* Check for supported clock IDs */ + cmpli cr0,r3,CLOCK_REALTIME + cmpli cr1,r3,CLOCK_MONOTONIC + cror cr0,cr0,cr1 + bne cr0,99f + + mflr r12 /* r12 saves lr */ + .cfi_register lr,r12 + mr r10,r3 /* r10 saves id */ + mr r11,r4 /* r11 saves tp */ + bl __get_datapage@local /* get data page */ + mr r9, r3 /* datapage ptr in r9 */ + beq cr1,50f /* if monotonic -> jump there */ + + /* + * CLOCK_REALTIME + */ + + bl __do_get_xsec@local /* get xsec from tb & kernel */ + bne- 98f /* out of line -> do syscall */ + + /* seconds are xsec >> 20 */ + rlwinm r5,r4,12,20,31 + rlwimi r5,r3,12,0,19 + stw r5,TSPC32_TV_SEC(r11) + + /* get remaining xsec and convert to nsec. we scale + * up remaining xsec by 12 bits and get the top 32 bits + * of the multiplication, then we multiply by 1000 + */ + rlwinm r5,r4,12,0,19 + lis r6,1000000@h + ori r6,r6,1000000@l + mulhwu r5,r5,r6 + mulli r5,r5,1000 + stw r5,TSPC32_TV_NSEC(r11) + mtlr r12 + li r3,0 + blr + + /* + * CLOCK_MONOTONIC + */ + +50: bl __do_get_xsec@local /* get xsec from tb & kernel */ + bne- 98f /* out of line -> do syscall */ + + /* seconds are xsec >> 20 */ + rlwinm r6,r4,12,20,31 + rlwimi r6,r3,12,0,19 + + /* get remaining xsec and convert to nsec. we scale + * up remaining xsec by 12 bits and get the top 32 bits + * of the multiplication, then we multiply by 1000 + */ + rlwinm r7,r4,12,0,19 + lis r5,1000000@h + ori r5,r5,1000000@l + mulhwu r7,r7,r5 + mulli r7,r7,1000 + + /* now we must fixup using wall to monotonic. We need to snapshot + * that value and do the counter trick again. Fortunately, we still + * have the counter value in r8 that was returned by __do_get_xsec. + * At this point, r6,r7 contain our sec/nsec values, r3,r4 and r5 + * can be used + */ + + lwz r3,WTOM_CLOCK_SEC(r9) + lwz r4,WTOM_CLOCK_NSEC(r9) + + /* We now have our result in r3,r4. We create a fake dependency + * on that result and re-check the counter + */ + or r5,r4,r3 + xor r0,r5,r5 + add r9,r9,r0 +#ifdef CONFIG_PPC64 + lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) +#else + lwz r0,(CFG_TB_UPDATE_COUNT)(r9) +#endif + cmpl cr0,r8,r0 /* check if updated */ + bne- 50b + + /* Calculate and store result. Note that this mimmics the C code, + * which may cause funny results if nsec goes negative... is that + * possible at all ? + */ + add r3,r3,r6 + add r4,r4,r7 + lis r5,NSEC_PER_SEC@h + ori r5,r5,NSEC_PER_SEC@l + cmpli cr0,r4,r5 + blt 1f + subf r4,r5,r4 + addi r3,r3,1 +1: stw r3,TSPC32_TV_SEC(r11) + stw r4,TSPC32_TV_NSEC(r11) + + mtlr r12 + li r3,0 + blr + + /* + * syscall fallback + */ +98: + mtlr r12 + mr r3,r10 + mr r4,r11 +99: + li r0,__NR_clock_gettime + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_gettime) + + +/* + * Exact prototype of clock_getres() + * + * int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_getres) + .cfi_startproc + /* Check for supported clock IDs */ + cmpwi cr0,r3,CLOCK_REALTIME + cmpwi cr1,r3,CLOCK_MONOTONIC + cror cr0,cr0,cr1 + bne cr0,99f + + li r3,0 + cmpli cr0,r4,0 + beqlr + lis r5,CLOCK_REALTIME_RES@h + ori r5,r5,CLOCK_REALTIME_RES@l + stw r3,TSPC32_TV_SEC(r4) + stw r5,TSPC32_TV_NSEC(r4) + blr + + /* + * syscall fallback + */ +99: + li r0,__NR_clock_getres + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_getres) + + +/* + * This is the core of gettimeofday() & friends, it returns the xsec + * value in r3 & r4 and expects the datapage ptr (non clobbered) + * in r9. clobbers r0,r4,r5,r6,r7,r8. + * When returning, r8 contains the counter value that can be reused + * by the monotonic clock implementation + */ +__do_get_xsec: + .cfi_startproc + /* Check for update count & load values. We use the low + * order 32 bits of the update count + */ +#ifdef CONFIG_PPC64 +1: lwz r8,(CFG_TB_UPDATE_COUNT+4)(r9) +#else +1: lwz r8,(CFG_TB_UPDATE_COUNT)(r9) +#endif + andi. r0,r8,1 /* pending update ? loop */ + bne- 1b + xor r0,r8,r8 /* create dependency */ + add r9,r9,r0 + + /* Load orig stamp (offset to TB) */ + lwz r5,CFG_TB_ORIG_STAMP(r9) + lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) + + /* Get a stable TB value */ +2: mftbu r3 + mftbl r4 + mftbu r0 + cmpl cr0,r3,r0 + bne- 2b + + /* Substract tb orig stamp. If the high part is non-zero, we jump to + * the slow path which call the syscall. + * If it's ok, then we have our 32 bits tb_ticks value in r7 + */ + subfc r7,r6,r4 + subfe. r0,r5,r3 + bne- 3f + + /* Load scale factor & do multiplication */ + lwz r5,CFG_TB_TO_XS(r9) /* load values */ + lwz r6,(CFG_TB_TO_XS+4)(r9) + mulhwu r4,r7,r5 + mulhwu r6,r7,r6 + mullw r0,r7,r5 + addc r6,r6,r0 + + /* At this point, we have the scaled xsec value in r4 + XER:CA + * we load & add the stamp since epoch + */ + lwz r5,CFG_STAMP_XSEC(r9) + lwz r6,(CFG_STAMP_XSEC+4)(r9) + adde r4,r4,r6 + addze r3,r5 + + /* We now have our result in r3,r4. We create a fake dependency + * on that result and re-check the counter + */ + or r6,r4,r3 + xor r0,r6,r6 + add r9,r9,r0 +#ifdef CONFIG_PPC64 + lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) +#else + lwz r0,(CFG_TB_UPDATE_COUNT)(r9) +#endif + cmpl cr0,r8,r0 /* check if updated */ + bne- 1b + + /* Warning ! The caller expects CR:EQ to be set to indicate a + * successful calculation (so it won't fallback to the syscall + * method). We have overriden that CR bit in the counter check, + * but fortunately, the loop exit condition _is_ CR:EQ set, so + * we can exit safely here. If you change this code, be careful + * of that side effect. + */ +3: blr + .cfi_endproc diff --git a/arch/ppc64/kernel/vdso32/note.S b/arch/powerpc/kernel/vdso32/note.S index d4b5be4f3d5..d4b5be4f3d5 100644 --- a/arch/ppc64/kernel/vdso32/note.S +++ b/arch/powerpc/kernel/vdso32/note.S diff --git a/arch/ppc64/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S index e0464278191..e0464278191 100644 --- a/arch/ppc64/kernel/vdso32/sigtramp.S +++ b/arch/powerpc/kernel/vdso32/sigtramp.S diff --git a/arch/ppc64/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index 6f87a916a39..f4bad720cb0 100644 --- a/arch/ppc64/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -102,9 +102,12 @@ VERSION { VDSO_VERSION_STRING { global: - __kernel_datapage_offset; /* Has to be there for the kernel to find it */ + __kernel_datapage_offset; /* Has to be there for the kernel to find */ __kernel_get_syscall_map; __kernel_gettimeofday; + __kernel_clock_gettime; + __kernel_clock_getres; + __kernel_get_tbfreq; __kernel_sync_dicache; __kernel_sync_dicache_p5; __kernel_sigtramp32; diff --git a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S index 76ca28e09d2..556f0caa5d8 100644 --- a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S +++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S @@ -6,7 +6,7 @@ .globl vdso32_start, vdso32_end .balign PAGE_SIZE vdso32_start: - .incbin "arch/ppc64/kernel/vdso32/vdso32.so" + .incbin "arch/powerpc/kernel/vdso32/vdso32.so" .balign PAGE_SIZE vdso32_end: diff --git a/arch/ppc64/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index ab39988452c..ab39988452c 100644 --- a/arch/ppc64/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile diff --git a/arch/ppc64/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S index d4a0ad28d53..d4a0ad28d53 100644 --- a/arch/ppc64/kernel/vdso64/cacheflush.S +++ b/arch/powerpc/kernel/vdso64/cacheflush.S diff --git a/arch/ppc64/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index ed6e599ae82..e67eda0f8cd 100644 --- a/arch/ppc64/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -66,3 +66,19 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) + + +/* + * void unsigned long __kernel_get_tbfreq(void); + * + * returns the timebase frequency in HZ + */ +V_FUNCTION_BEGIN(__kernel_get_tbfreq) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + bl V_LOCAL_FUNC(__get_datapage) + ld r3,CFG_TB_TICKS_PER_SEC(r3) + mtlr r12 + .cfi_endproc +V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S new file mode 100644 index 00000000000..d371c02a8c0 --- /dev/null +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -0,0 +1,242 @@ +/* + * Userland implementation of gettimeofday() for 64 bits processes in a + * ppc64 kernel for use in the vDSO + * + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/vdso.h> +#include <asm/asm-offsets.h> +#include <asm/unistd.h> + + .text +/* + * Exact prototype of gettimeofday + * + * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); + * + */ +V_FUNCTION_BEGIN(__kernel_gettimeofday) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + + mr r11,r3 /* r11 holds tv */ + mr r10,r4 /* r10 holds tz */ + bl V_LOCAL_FUNC(__get_datapage) /* get data page */ + bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 + rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ + rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ + std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ + subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / + * XSEC_PER_SEC + */ + rldicl r0,r0,44,20 + cmpldi cr0,r10,0 /* check if tz is NULL */ + std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ + beq 1f + lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ + lwz r5,CFG_TZ_DSTTIME(r3) + stw r4,TZONE_TZ_MINWEST(r10) + stw r5,TZONE_TZ_DSTTIME(r10) +1: mtlr r12 + li r3,0 /* always success */ + blr + .cfi_endproc +V_FUNCTION_END(__kernel_gettimeofday) + + +/* + * Exact prototype of clock_gettime() + * + * int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_gettime) + .cfi_startproc + /* Check for supported clock IDs */ + cmpwi cr0,r3,CLOCK_REALTIME + cmpwi cr1,r3,CLOCK_MONOTONIC + cror cr0,cr0,cr1 + bne cr0,99f + + mflr r12 /* r12 saves lr */ + .cfi_register lr,r12 + mr r10,r3 /* r10 saves id */ + mr r11,r4 /* r11 saves tp */ + bl V_LOCAL_FUNC(__get_datapage) /* get data page */ + beq cr1,50f /* if monotonic -> jump there */ + + /* + * CLOCK_REALTIME + */ + + bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ + + lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ + ori r7,r7,0xca00 + rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ + rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ + std r5,TSPC64_TV_SEC(r11) /* store sec in tv */ + subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ + mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + * XSEC_PER_SEC + */ + rldicl r0,r0,44,20 + std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ + + mtlr r12 + li r3,0 + blr + + /* + * CLOCK_MONOTONIC + */ + +50: bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ + + lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ + ori r7,r7,0xca00 + rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ + rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ + subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ + mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + * XSEC_PER_SEC + */ + rldicl r6,r0,44,20 + + /* now we must fixup using wall to monotonic. We need to snapshot + * that value and do the counter trick again. Fortunately, we still + * have the counter value in r8 that was returned by __do_get_xsec. + * At this point, r5,r6 contain our sec/nsec values. + * can be used + */ + + lwz r4,WTOM_CLOCK_SEC(r9) + lwz r7,WTOM_CLOCK_NSEC(r9) + + /* We now have our result in r4,r7. We create a fake dependency + * on that result and re-check the counter + */ + or r9,r4,r7 + xor r0,r9,r9 + add r3,r3,r0 + ld r0,CFG_TB_UPDATE_COUNT(r3) + cmpld cr0,r0,r8 /* check if updated */ + bne- 50b + + /* Calculate and store result. Note that this mimmics the C code, + * which may cause funny results if nsec goes negative... is that + * possible at all ? + */ + add r4,r4,r5 + add r7,r7,r6 + lis r9,NSEC_PER_SEC@h + ori r9,r9,NSEC_PER_SEC@l + cmpli cr0,r7,r9 + blt 1f + subf r7,r9,r7 + addi r4,r4,1 +1: std r4,TSPC64_TV_SEC(r11) + std r7,TSPC64_TV_NSEC(r11) + + mtlr r12 + li r3,0 + blr + + /* + * syscall fallback + */ +98: + mtlr r12 + mr r3,r10 + mr r4,r11 +99: + li r0,__NR_clock_gettime + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_gettime) + + +/* + * Exact prototype of clock_getres() + * + * int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_getres) + .cfi_startproc + /* Check for supported clock IDs */ + cmpwi cr0,r3,CLOCK_REALTIME + cmpwi cr1,r3,CLOCK_MONOTONIC + cror cr0,cr0,cr1 + bne cr0,99f + + li r3,0 + cmpli cr0,r4,0 + beqlr + lis r5,CLOCK_REALTIME_RES@h + ori r5,r5,CLOCK_REALTIME_RES@l + std r3,TSPC64_TV_SEC(r4) + std r5,TSPC64_TV_NSEC(r4) + blr + + /* + * syscall fallback + */ +99: + li r0,__NR_clock_getres + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_getres) + + +/* + * This is the core of gettimeofday(), it returns the xsec + * value in r4 and expects the datapage ptr (non clobbered) + * in r3. clobbers r0,r4,r5,r6,r7,r8 + * When returning, r8 contains the counter value that can be reused + */ +V_FUNCTION_BEGIN(__do_get_xsec) + .cfi_startproc + /* check for update count & load values */ +1: ld r8,CFG_TB_UPDATE_COUNT(r3) + andi. r0,r4,1 /* pending update ? loop */ + bne- 1b + xor r0,r4,r4 /* create dependency */ + add r3,r3,r0 + + /* Get TB & offset it */ + mftb r7 + ld r9,CFG_TB_ORIG_STAMP(r3) + subf r7,r9,r7 + + /* Scale result */ + ld r5,CFG_TB_TO_XS(r3) + mulhdu r7,r7,r5 + + /* Add stamp since epoch */ + ld r6,CFG_STAMP_XSEC(r3) + add r4,r6,r7 + + xor r0,r4,r4 + add r3,r3,r0 + ld r0,CFG_TB_UPDATE_COUNT(r3) + cmpld cr0,r0,r8 /* check if updated */ + bne- 1b + blr + .cfi_endproc +V_FUNCTION_END(__do_get_xsec) diff --git a/arch/ppc64/kernel/vdso64/note.S b/arch/powerpc/kernel/vdso64/note.S index dc2a509f7e8..dc2a509f7e8 100644 --- a/arch/ppc64/kernel/vdso64/note.S +++ b/arch/powerpc/kernel/vdso64/note.S diff --git a/arch/ppc64/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S index 31b604ab56d..31b604ab56d 100644 --- a/arch/ppc64/kernel/vdso64/sigtramp.S +++ b/arch/powerpc/kernel/vdso64/sigtramp.S diff --git a/arch/ppc64/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 9cb28181da8..4bdf224464a 100644 --- a/arch/ppc64/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -102,9 +102,12 @@ VERSION { VDSO_VERSION_STRING { global: - __kernel_datapage_offset; /* Has to be there for the kernel to find it */ + __kernel_datapage_offset; /* Has to be there for the kernel to find */ __kernel_get_syscall_map; __kernel_gettimeofday; + __kernel_clock_gettime; + __kernel_clock_getres; + __kernel_get_tbfreq; __kernel_sync_dicache; __kernel_sync_dicache_p5; __kernel_sigtramp_rt64; diff --git a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S index 771c2741c49..0529cb9e3b9 100644 --- a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S +++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S @@ -6,7 +6,7 @@ .globl vdso64_start, vdso64_end .balign PAGE_SIZE vdso64_start: - .incbin "arch/ppc64/kernel/vdso64/vdso64.so" + .incbin "arch/powerpc/kernel/vdso64/vdso64.so" .balign PAGE_SIZE vdso64_end: diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 97082a4203a..71a6addf9f7 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -21,6 +21,7 @@ #include <asm/iommu.h> #include <asm/dma.h> #include <asm/vio.h> +#include <asm/prom.h> static const struct vio_device_id *vio_match_device( const struct vio_device_id *, const struct vio_dev *); @@ -265,7 +266,33 @@ static int vio_bus_match(struct device *dev, struct device_driver *drv) return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL); } +static int vio_hotplug(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + const struct vio_dev *vio_dev = to_vio_dev(dev); + char *cp; + int length; + + if (!num_envp) + return -ENOMEM; + + if (!vio_dev->dev.platform_data) + return -ENODEV; + cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length); + if (!cp) + return -ENODEV; + + envp[0] = buffer; + length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s", + vio_dev->type, cp); + if (buffer_size - length <= 0) + return -ENOMEM; + envp[1] = NULL; + return 0; +} + struct bus_type vio_bus_type = { .name = "vio", + .hotplug = vio_hotplug, .match = vio_bus_match, }; diff --git a/arch/powerpc/lib/bitops.c b/arch/powerpc/lib/bitops.c index b67ce3004eb..f68ad71a018 100644 --- a/arch/powerpc/lib/bitops.c +++ b/arch/powerpc/lib/bitops.c @@ -41,7 +41,7 @@ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, tmp = *p; found_first: - tmp &= (~0UL >> (64 - size)); + tmp &= (~0UL >> (BITS_PER_LONG - size)); if (tmp == 0UL) /* Are any bits set? */ return result + size; /* Nope. */ found_middle: diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 22e47487613..706e8a63ced 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -84,10 +84,11 @@ extern unsigned long dart_tablebase; #endif /* CONFIG_U3_DART */ +static unsigned long _SDR1; +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + hpte_t *htab_address; unsigned long htab_hash_mask; -unsigned long _SDR1; -struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; #ifdef CONFIG_HUGETLB_PAGE @@ -165,7 +166,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, * normal insert callback here. */ #ifdef CONFIG_PPC_ISERIES - if (systemcfg->platform == PLATFORM_ISERIES_LPAR) + if (_machine == PLATFORM_ISERIES_LPAR) ret = iSeries_hpte_insert(hpteg, va, virt_to_abs(paddr), tmp_mode, @@ -174,7 +175,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, else #endif #ifdef CONFIG_PPC_PSERIES - if (systemcfg->platform & PLATFORM_LPAR) + if (_machine & PLATFORM_LPAR) ret = pSeries_lpar_hpte_insert(hpteg, va, virt_to_abs(paddr), tmp_mode, @@ -293,7 +294,7 @@ static void __init htab_init_page_sizes(void) * Not in the device-tree, let's fallback on known size * list for 16M capable GP & GR */ - if ((systemcfg->platform != PLATFORM_ISERIES_LPAR) && + if ((_machine != PLATFORM_ISERIES_LPAR) && cpu_has_feature(CPU_FTR_16M_PAGE)) memcpy(mmu_psize_defs, mmu_psize_defaults_gp, sizeof(mmu_psize_defaults_gp)); @@ -364,7 +365,7 @@ static int __init htab_dt_scan_pftsize(unsigned long node, static unsigned long __init htab_get_table_size(void) { - unsigned long rnd_mem_size, pteg_count; + unsigned long mem_size, rnd_mem_size, pteg_count; /* If hash size isn't already provided by the platform, we try to * retreive it from the device-tree. If it's not there neither, we @@ -376,8 +377,9 @@ static unsigned long __init htab_get_table_size(void) return 1UL << ppc64_pft_size; /* round mem_size up to next power of 2 */ - rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize); - if (rnd_mem_size < systemcfg->physicalMemorySize) + mem_size = lmb_phys_mem_size(); + rnd_mem_size = 1UL << __ilog2(mem_size); + if (rnd_mem_size < mem_size) rnd_mem_size <<= 1; /* # pages / 2 */ @@ -386,6 +388,15 @@ static unsigned long __init htab_get_table_size(void) return pteg_count << 7; } +#ifdef CONFIG_MEMORY_HOTPLUG +void create_section_mapping(unsigned long start, unsigned long end) +{ + BUG_ON(htab_bolt_mapping(start, end, start, + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, + mmu_linear_psize)); +} +#endif /* CONFIG_MEMORY_HOTPLUG */ + void __init htab_initialize(void) { unsigned long table, htab_size_bytes; @@ -410,7 +421,7 @@ void __init htab_initialize(void) htab_hash_mask = pteg_count - 1; - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { /* Using a hypervisor which owns the htab */ htab_address = NULL; _SDR1 = 0; @@ -431,6 +442,9 @@ void __init htab_initialize(void) /* Initialize the HPT with no entries */ memset((void *)table, 0, htab_size_bytes); + + /* Set SDR1 */ + mtspr(SPRN_SDR1, _SDR1); } mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; @@ -500,6 +514,12 @@ void __init htab_initialize(void) #undef KB #undef MB +void __init htab_initialize_secondary(void) +{ + if (!platform_is_lpar()) + mtspr(SPRN_SDR1, _SDR1); +} + /* * Called by asm hashtable.S for doing lazy icache flush */ diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 4612a79dfb6..7d4b8b5f060 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -84,9 +84,6 @@ void MMU_init(void); /* XXX should be in current.h -- paulus */ extern struct task_struct *current_set[NR_CPUS]; -char *klimit = _end; -struct device_node *memory_node; - extern int init_bootmem_done; /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index ce974c83d88..1134f70f231 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -20,6 +20,8 @@ * */ +#undef DEBUG + #include <linux/config.h> #include <linux/signal.h> #include <linux/sched.h> @@ -64,6 +66,12 @@ #include <asm/vdso.h> #include <asm/imalloc.h> +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + #if PGTABLE_RANGE > USER_VSID_RANGE #warning Limited user VSID range means pagetable space is wasted #endif @@ -72,8 +80,6 @@ #warning TASK_SIZE is smaller than it needs to be. #endif -unsigned long klimit = (unsigned long)_end; - /* max amount of RAM to use */ unsigned long __max_memory; @@ -188,14 +194,14 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) } #ifdef CONFIG_PPC_64K_PAGES -static const int pgtable_cache_size[2] = { - PTE_TABLE_SIZE, PGD_TABLE_SIZE +static const unsigned int pgtable_cache_size[3] = { + PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { - "pte_pmd_cache", "pgd_cache", + "pte_pmd_cache", "pmd_cache", "pgd_cache", }; #else -static const int pgtable_cache_size[2] = { +static const unsigned int pgtable_cache_size[2] = { PTE_TABLE_SIZE, PMD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { @@ -213,6 +219,8 @@ void pgtable_cache_init(void) int size = pgtable_cache_size[i]; const char *name = pgtable_cache_name[i]; + DBG("Allocating page table cache %s (#%d) " + "for size: %08x...\n", name, i, size); pgtable_cache[i] = kmem_cache_create(name, size, size, SLAB_HWCACHE_ALIGN | diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 6f55efd9be9..e2c95fcb805 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -46,9 +46,7 @@ #include <asm/prom.h> #include <asm/lmb.h> #include <asm/sections.h> -#ifdef CONFIG_PPC64 #include <asm/vdso.h> -#endif #include "mmu_decl.h" @@ -110,6 +108,7 @@ EXPORT_SYMBOL(phys_mem_access_prot); void online_page(struct page *page) { ClearPageReserved(page); + set_page_count(page, 0); free_cold_page(page); totalram_pages++; num_physpages++; @@ -127,6 +126,9 @@ int __devinit add_memory(u64 start, u64 size) unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; + start += KERNELBASE; + create_section_mapping(start, start + size); + /* this should work for most non-highmem platforms */ zone = pgdata->node_zones; @@ -393,10 +395,8 @@ void __init mem_init(void) mem_init_done = 1; -#ifdef CONFIG_PPC64 /* Initialize the vDSO */ vdso_init(); -#endif } /* diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index da09ba03c42..bd2cf133688 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -17,9 +17,8 @@ #include <linux/nodemask.h> #include <linux/cpu.h> #include <linux/notifier.h> +#include <asm/sparsemem.h> #include <asm/lmb.h> -#include <asm/machdep.h> -#include <asm/abs_addr.h> #include <asm/system.h> #include <asm/smp.h> @@ -28,45 +27,113 @@ static int numa_enabled = 1; static int numa_debug; #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); } -#ifdef DEBUG_NUMA -#define ARRAY_INITIALISER -1 -#else -#define ARRAY_INITIALISER 0 -#endif - -int numa_cpu_lookup_table[NR_CPUS] = { [ 0 ... (NR_CPUS - 1)] = - ARRAY_INITIALISER}; -char *numa_memory_lookup_table; +int numa_cpu_lookup_table[NR_CPUS]; cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES]; -int nr_cpus_in_node[MAX_NUMNODES] = { [0 ... (MAX_NUMNODES -1)] = 0}; - struct pglist_data *node_data[MAX_NUMNODES]; -bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; + +EXPORT_SYMBOL(numa_cpu_lookup_table); +EXPORT_SYMBOL(numa_cpumask_lookup_table); +EXPORT_SYMBOL(node_data); + +static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; static int min_common_depth; /* - * We need somewhere to store start/span for each node until we have + * We need somewhere to store start/end/node for each region until we have * allocated the real node_data structures. */ +#define MAX_REGIONS (MAX_LMB_REGIONS*2) static struct { - unsigned long node_start_pfn; - unsigned long node_end_pfn; - unsigned long node_present_pages; -} init_node_data[MAX_NUMNODES] __initdata; + unsigned long start_pfn; + unsigned long end_pfn; + int nid; +} init_node_data[MAX_REGIONS] __initdata; -EXPORT_SYMBOL(node_data); -EXPORT_SYMBOL(numa_cpu_lookup_table); -EXPORT_SYMBOL(numa_memory_lookup_table); -EXPORT_SYMBOL(numa_cpumask_lookup_table); -EXPORT_SYMBOL(nr_cpus_in_node); +int __init early_pfn_to_nid(unsigned long pfn) +{ + unsigned int i; + + for (i = 0; init_node_data[i].end_pfn; i++) { + unsigned long start_pfn = init_node_data[i].start_pfn; + unsigned long end_pfn = init_node_data[i].end_pfn; + + if ((start_pfn <= pfn) && (pfn < end_pfn)) + return init_node_data[i].nid; + } + + return -1; +} + +void __init add_region(unsigned int nid, unsigned long start_pfn, + unsigned long pages) +{ + unsigned int i; + + dbg("add_region nid %d start_pfn 0x%lx pages 0x%lx\n", + nid, start_pfn, pages); + + for (i = 0; init_node_data[i].end_pfn; i++) { + if (init_node_data[i].nid != nid) + continue; + if (init_node_data[i].end_pfn == start_pfn) { + init_node_data[i].end_pfn += pages; + return; + } + if (init_node_data[i].start_pfn == (start_pfn + pages)) { + init_node_data[i].start_pfn -= pages; + return; + } + } + + /* + * Leave last entry NULL so we dont iterate off the end (we use + * entry.end_pfn to terminate the walk). + */ + if (i >= (MAX_REGIONS - 1)) { + printk(KERN_ERR "WARNING: too many memory regions in " + "numa code, truncating\n"); + return; + } + + init_node_data[i].start_pfn = start_pfn; + init_node_data[i].end_pfn = start_pfn + pages; + init_node_data[i].nid = nid; +} + +/* We assume init_node_data has no overlapping regions */ +void __init get_region(unsigned int nid, unsigned long *start_pfn, + unsigned long *end_pfn, unsigned long *pages_present) +{ + unsigned int i; + + *start_pfn = -1UL; + *end_pfn = *pages_present = 0; + + for (i = 0; init_node_data[i].end_pfn; i++) { + if (init_node_data[i].nid != nid) + continue; + + *pages_present += init_node_data[i].end_pfn - + init_node_data[i].start_pfn; + + if (init_node_data[i].start_pfn < *start_pfn) + *start_pfn = init_node_data[i].start_pfn; + + if (init_node_data[i].end_pfn > *end_pfn) + *end_pfn = init_node_data[i].end_pfn; + } + + /* We didnt find a matching region, return start/end as 0 */ + if (*start_pfn == -1UL) + start_pfn = 0; +} static inline void map_cpu_to_node(int cpu, int node) { numa_cpu_lookup_table[cpu] = node; - if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node]))) { + + if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node]))) cpu_set(cpu, numa_cpumask_lookup_table[node]); - nr_cpus_in_node[node]++; - } } #ifdef CONFIG_HOTPLUG_CPU @@ -78,7 +145,6 @@ static void unmap_cpu_from_node(unsigned long cpu) if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) { cpu_clear(cpu, numa_cpumask_lookup_table[node]); - nr_cpus_in_node[node]--; } else { printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", cpu, node); @@ -86,7 +152,7 @@ static void unmap_cpu_from_node(unsigned long cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static struct device_node * __devinit find_cpu_node(unsigned int cpu) +static struct device_node *find_cpu_node(unsigned int cpu) { unsigned int hw_cpuid = get_hard_smp_processor_id(cpu); struct device_node *cpu_node = NULL; @@ -213,7 +279,7 @@ static int __init get_mem_size_cells(void) return rc; } -static unsigned long read_n_cells(int n, unsigned int **buf) +static unsigned long __init read_n_cells(int n, unsigned int **buf) { unsigned long result = 0; @@ -295,7 +361,8 @@ static int cpu_numa_callback(struct notifier_block *nfb, * or zero. If the returned value of size is 0 the region should be * discarded as it lies wholy above the memory limit. */ -static unsigned long __init numa_enforce_memory_limit(unsigned long start, unsigned long size) +static unsigned long __init numa_enforce_memory_limit(unsigned long start, + unsigned long size) { /* * We use lmb_end_of_DRAM() in here instead of memory_limit because @@ -320,8 +387,7 @@ static int __init parse_numa_properties(void) struct device_node *cpu = NULL; struct device_node *memory = NULL; int addr_cells, size_cells; - int max_domain = 0; - long entries = lmb_end_of_DRAM() >> MEMORY_INCREMENT_SHIFT; + int max_domain; unsigned long i; if (numa_enabled == 0) { @@ -329,13 +395,6 @@ static int __init parse_numa_properties(void) return -1; } - numa_memory_lookup_table = - (char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1)); - memset(numa_memory_lookup_table, 0, entries * sizeof(char)); - - for (i = 0; i < entries ; i++) - numa_memory_lookup_table[i] = ARRAY_INITIALISER; - min_common_depth = find_min_common_depth(); dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth); @@ -387,9 +446,6 @@ new_range: start = read_n_cells(addr_cells, &memcell_buf); size = read_n_cells(size_cells, &memcell_buf); - start = _ALIGN_DOWN(start, MEMORY_INCREMENT); - size = _ALIGN_UP(size, MEMORY_INCREMENT); - numa_domain = of_node_numa_domain(memory); if (numa_domain >= MAX_NUMNODES) { @@ -403,44 +459,15 @@ new_range: if (max_domain < numa_domain) max_domain = numa_domain; - if (! (size = numa_enforce_memory_limit(start, size))) { + if (!(size = numa_enforce_memory_limit(start, size))) { if (--ranges) goto new_range; else continue; } - /* - * Initialize new node struct, or add to an existing one. - */ - if (init_node_data[numa_domain].node_end_pfn) { - if ((start / PAGE_SIZE) < - init_node_data[numa_domain].node_start_pfn) - init_node_data[numa_domain].node_start_pfn = - start / PAGE_SIZE; - if (((start / PAGE_SIZE) + (size / PAGE_SIZE)) > - init_node_data[numa_domain].node_end_pfn) - init_node_data[numa_domain].node_end_pfn = - (start / PAGE_SIZE) + - (size / PAGE_SIZE); - - init_node_data[numa_domain].node_present_pages += - size / PAGE_SIZE; - } else { - node_set_online(numa_domain); - - init_node_data[numa_domain].node_start_pfn = - start / PAGE_SIZE; - init_node_data[numa_domain].node_end_pfn = - init_node_data[numa_domain].node_start_pfn + - size / PAGE_SIZE; - init_node_data[numa_domain].node_present_pages = - size / PAGE_SIZE; - } - - for (i = start ; i < (start+size); i += MEMORY_INCREMENT) - numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = - numa_domain; + add_region(numa_domain, start >> PAGE_SHIFT, + size >> PAGE_SHIFT); if (--ranges) goto new_range; @@ -456,32 +483,15 @@ static void __init setup_nonnuma(void) { unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long total_ram = lmb_phys_mem_size(); - unsigned long i; printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); printk(KERN_INFO "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - if (!numa_memory_lookup_table) { - long entries = top_of_ram >> MEMORY_INCREMENT_SHIFT; - numa_memory_lookup_table = - (char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1)); - memset(numa_memory_lookup_table, 0, entries * sizeof(char)); - for (i = 0; i < entries ; i++) - numa_memory_lookup_table[i] = ARRAY_INITIALISER; - } - map_cpu_to_node(boot_cpuid, 0); - + add_region(0, 0, lmb_end_of_DRAM() >> PAGE_SHIFT); node_set_online(0); - - init_node_data[0].node_start_pfn = 0; - init_node_data[0].node_end_pfn = lmb_end_of_DRAM() / PAGE_SIZE; - init_node_data[0].node_present_pages = total_ram / PAGE_SIZE; - - for (i = 0 ; i < top_of_ram; i += MEMORY_INCREMENT) - numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = 0; } static void __init dump_numa_topology(void) @@ -499,8 +509,9 @@ static void __init dump_numa_topology(void) count = 0; - for (i = 0; i < lmb_end_of_DRAM(); i += MEMORY_INCREMENT) { - if (numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] == node) { + for (i = 0; i < lmb_end_of_DRAM(); + i += (1 << SECTION_SIZE_BITS)) { + if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) { if (count == 0) printk(" 0x%lx", i); ++count; @@ -525,10 +536,12 @@ static void __init dump_numa_topology(void) * * Returns the physical address of the memory. */ -static unsigned long careful_allocation(int nid, unsigned long size, - unsigned long align, unsigned long end) +static void __init *careful_allocation(int nid, unsigned long size, + unsigned long align, + unsigned long end_pfn) { - unsigned long ret = lmb_alloc_base(size, align, end); + int new_nid; + unsigned long ret = lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT); /* retry over all memory */ if (!ret) @@ -542,28 +555,27 @@ static unsigned long careful_allocation(int nid, unsigned long size, * If the memory came from a previously allocated node, we must * retry with the bootmem allocator. */ - if (pa_to_nid(ret) < nid) { - nid = pa_to_nid(ret); - ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(nid), + new_nid = early_pfn_to_nid(ret >> PAGE_SHIFT); + if (new_nid < nid) { + ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(new_nid), size, align, 0); if (!ret) panic("numa.c: cannot allocate %lu bytes on node %d", - size, nid); + size, new_nid); - ret = virt_to_abs(ret); + ret = __pa(ret); dbg("alloc_bootmem %lx %lx\n", ret, size); } - return ret; + return (void *)ret; } void __init do_init_bootmem(void) { int nid; - int addr_cells, size_cells; - struct device_node *memory = NULL; + unsigned int i; static struct notifier_block ppc64_numa_nb = { .notifier_call = cpu_numa_callback, .priority = 1 /* Must run before sched domains notifier. */ @@ -581,99 +593,66 @@ void __init do_init_bootmem(void) register_cpu_notifier(&ppc64_numa_nb); for_each_online_node(nid) { - unsigned long start_paddr, end_paddr; - int i; + unsigned long start_pfn, end_pfn, pages_present; unsigned long bootmem_paddr; unsigned long bootmap_pages; - start_paddr = init_node_data[nid].node_start_pfn * PAGE_SIZE; - end_paddr = init_node_data[nid].node_end_pfn * PAGE_SIZE; + get_region(nid, &start_pfn, &end_pfn, &pages_present); /* Allocate the node structure node local if possible */ - NODE_DATA(nid) = (struct pglist_data *)careful_allocation(nid, + NODE_DATA(nid) = careful_allocation(nid, sizeof(struct pglist_data), - SMP_CACHE_BYTES, end_paddr); - NODE_DATA(nid) = abs_to_virt(NODE_DATA(nid)); + SMP_CACHE_BYTES, end_pfn); + NODE_DATA(nid) = __va(NODE_DATA(nid)); memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); dbg("node %d\n", nid); dbg("NODE_DATA() = %p\n", NODE_DATA(nid)); NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; - NODE_DATA(nid)->node_start_pfn = - init_node_data[nid].node_start_pfn; - NODE_DATA(nid)->node_spanned_pages = - end_paddr - start_paddr; + NODE_DATA(nid)->node_start_pfn = start_pfn; + NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; if (NODE_DATA(nid)->node_spanned_pages == 0) continue; - dbg("start_paddr = %lx\n", start_paddr); - dbg("end_paddr = %lx\n", end_paddr); + dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT); + dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT); - bootmap_pages = bootmem_bootmap_pages((end_paddr - start_paddr) >> PAGE_SHIFT); + bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + bootmem_paddr = (unsigned long)careful_allocation(nid, + bootmap_pages << PAGE_SHIFT, + PAGE_SIZE, end_pfn); + memset(__va(bootmem_paddr), 0, bootmap_pages << PAGE_SHIFT); - bootmem_paddr = careful_allocation(nid, - bootmap_pages << PAGE_SHIFT, - PAGE_SIZE, end_paddr); - memset(abs_to_virt(bootmem_paddr), 0, - bootmap_pages << PAGE_SHIFT); dbg("bootmap_paddr = %lx\n", bootmem_paddr); init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT, - start_paddr >> PAGE_SHIFT, - end_paddr >> PAGE_SHIFT); + start_pfn, end_pfn); - /* - * We need to do another scan of all memory sections to - * associate memory with the correct node. - */ - addr_cells = get_mem_addr_cells(); - size_cells = get_mem_size_cells(); - memory = NULL; - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { - unsigned long mem_start, mem_size; - int numa_domain, ranges; - unsigned int *memcell_buf; - unsigned int len; - - memcell_buf = (unsigned int *)get_property(memory, "reg", &len); - if (!memcell_buf || len <= 0) - continue; + /* Add free regions on this node */ + for (i = 0; init_node_data[i].end_pfn; i++) { + unsigned long start, end; - ranges = memory->n_addrs; /* ranges in cell */ -new_range: - mem_start = read_n_cells(addr_cells, &memcell_buf); - mem_size = read_n_cells(size_cells, &memcell_buf); - if (numa_enabled) { - numa_domain = of_node_numa_domain(memory); - if (numa_domain >= MAX_NUMNODES) - numa_domain = 0; - } else - numa_domain = 0; - - if (numa_domain != nid) + if (init_node_data[i].nid != nid) continue; - mem_size = numa_enforce_memory_limit(mem_start, mem_size); - if (mem_size) { - dbg("free_bootmem %lx %lx\n", mem_start, mem_size); - free_bootmem_node(NODE_DATA(nid), mem_start, mem_size); - } + start = init_node_data[i].start_pfn << PAGE_SHIFT; + end = init_node_data[i].end_pfn << PAGE_SHIFT; - if (--ranges) /* process all ranges in cell */ - goto new_range; + dbg("free_bootmem %lx %lx\n", start, end - start); + free_bootmem_node(NODE_DATA(nid), start, end - start); } - /* - * Mark reserved regions on this node - */ + /* Mark reserved regions on this node */ for (i = 0; i < lmb.reserved.cnt; i++) { unsigned long physbase = lmb.reserved.region[i].base; unsigned long size = lmb.reserved.region[i].size; + unsigned long start_paddr = start_pfn << PAGE_SHIFT; + unsigned long end_paddr = end_pfn << PAGE_SHIFT; - if (pa_to_nid(physbase) != nid && - pa_to_nid(physbase+size-1) != nid) + if (early_pfn_to_nid(physbase >> PAGE_SHIFT) != nid && + early_pfn_to_nid((physbase+size-1) >> PAGE_SHIFT) != nid) continue; if (physbase < end_paddr && @@ -693,46 +672,19 @@ new_range: size); } } - /* - * This loop may look famaliar, but we have to do it again - * after marking our reserved memory to mark memory present - * for sparsemem. - */ - addr_cells = get_mem_addr_cells(); - size_cells = get_mem_size_cells(); - memory = NULL; - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { - unsigned long mem_start, mem_size; - int numa_domain, ranges; - unsigned int *memcell_buf; - unsigned int len; - - memcell_buf = (unsigned int *)get_property(memory, "reg", &len); - if (!memcell_buf || len <= 0) - continue; - ranges = memory->n_addrs; /* ranges in cell */ -new_range2: - mem_start = read_n_cells(addr_cells, &memcell_buf); - mem_size = read_n_cells(size_cells, &memcell_buf); - if (numa_enabled) { - numa_domain = of_node_numa_domain(memory); - if (numa_domain >= MAX_NUMNODES) - numa_domain = 0; - } else - numa_domain = 0; - - if (numa_domain != nid) + /* Add regions into sparsemem */ + for (i = 0; init_node_data[i].end_pfn; i++) { + unsigned long start, end; + + if (init_node_data[i].nid != nid) continue; - mem_size = numa_enforce_memory_limit(mem_start, mem_size); - memory_present(numa_domain, mem_start >> PAGE_SHIFT, - (mem_start + mem_size) >> PAGE_SHIFT); + start = init_node_data[i].start_pfn; + end = init_node_data[i].end_pfn; - if (--ranges) /* process all ranges in cell */ - goto new_range2; + memory_present(nid, start, end); } - } } @@ -746,21 +698,18 @@ void __init paging_init(void) memset(zholes_size, 0, sizeof(zholes_size)); for_each_online_node(nid) { - unsigned long start_pfn; - unsigned long end_pfn; + unsigned long start_pfn, end_pfn, pages_present; - start_pfn = init_node_data[nid].node_start_pfn; - end_pfn = init_node_data[nid].node_end_pfn; + get_region(nid, &start_pfn, &end_pfn, &pages_present); zones_size[ZONE_DMA] = end_pfn - start_pfn; - zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - - init_node_data[nid].node_present_pages; + zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - pages_present; dbg("free_area_init node %d %lx %lx (hole: %lx)\n", nid, zones_size[ZONE_DMA], start_pfn, zholes_size[ZONE_DMA]); - free_area_init_node(nid, NODE_DATA(nid), zones_size, - start_pfn, zholes_size); + free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, + zholes_size); } } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 900842451bd..c7f7bb6f30b 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -122,8 +122,11 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) * */ if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags, - mmu_virtual_psize)) - panic("Can't map bolted IO mapping"); + mmu_virtual_psize)) { + printk(KERN_ERR "Failed to do bolted mapping IO " + "memory at %016lx !\n", pa); + return -ENOMEM; + } } return 0; } diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index fa325dbf98f..cfbb4e1f966 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -20,6 +20,7 @@ #include <asm/cputable.h> #include <asm/lmb.h> #include <asm/abs_addr.h> +#include <asm/firmware.h> struct stab_entry { unsigned long esid_data; @@ -256,7 +257,7 @@ void stabs_alloc(void) paca[cpu].stab_addr = newstab; paca[cpu].stab_real = virt_to_abs(newstab); - printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx " + printk(KERN_INFO "Segment table for CPU %d at 0x%lx " "virtual, 0x%lx absolute\n", cpu, paca[cpu].stab_addr, paca[cpu].stab_real); } @@ -270,10 +271,28 @@ void stabs_alloc(void) void stab_initialize(unsigned long stab) { unsigned long vsid = get_kernel_vsid(KERNELBASE); + unsigned long stabreal; asm volatile("isync; slbia; isync":::"memory"); make_ste(stab, GET_ESID(KERNELBASE), vsid); /* Order update */ asm volatile("sync":::"memory"); + + /* Set ASR */ + stabreal = get_paca()->stab_real | 0x1ul; + +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES)) { + HvCall1(HvCallBaseSetASR, stabreal); + return; + } +#endif /* CONFIG_PPC_ISERIES */ +#ifdef CONFIG_PPC_PSERIES + if (platform_is_lpar()) { + plpar_hcall_norets(H_SET_ASR, stabreal); + return; + } +#endif + mtspr(SPRN_ASR, stabreal); } diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index c4ee5478427..a3401b46f3b 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -14,7 +14,6 @@ #include <asm/system.h> #include <asm/processor.h> #include <asm/cputable.h> -#include <asm/systemcfg.h> #include <asm/rtas.h> #include <asm/oprofile_impl.h> #include <asm/reg.h> @@ -233,8 +232,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); /* Were we in the hypervisor? */ - if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && - (mmcra & MMCRA_SIHV)) + if (platform_is_lpar() && (mmcra & MMCRA_SIHV)) /* function descriptor madness */ return *((unsigned long *)hypervisor_bucket); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index ecd32d5d85f..4099ddab920 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -361,7 +361,9 @@ static void __init chrp_find_openpic(void) printk(KERN_INFO "OpenPIC at %lx\n", opaddr); irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4); + prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4); + /* i8259 cascade is always positive level */ + init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE; iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); if (iranges == NULL) diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index a06603d84a4..01090e9ce0c 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -103,6 +103,9 @@ static void intReceived(struct XmPciLpEvent *eventParm, struct pt_regs *regsParm) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif ++Pci_Interrupt_Count; @@ -110,7 +113,20 @@ static void intReceived(struct XmPciLpEvent *eventParm, case XmPciLpEvent_SlotInterrupt: irq = eventParm->hvLpEvent.xCorrelationToken; /* Dispatch the interrupt handlers for this irq */ - ppc_irq_dispatch_handler(regsParm, irq); +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regsParm, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regsParm); HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, eventParm->eventData.slotInterrupt.subBusNumber, eventParm->eventData.slotInterrupt.deviceId); @@ -310,10 +326,8 @@ static void iSeries_disable_IRQ(unsigned int irq) } /* - * Need to define this so ppc_irq_dispatch_handler will NOT call - * enable_IRQ at the end of interrupt handling. However, this does - * nothing because there is not enough information provided to do - * the EOI HvCall. This is done by XmPciLpEvent.c + * This does nothing because there is not enough information + * provided to do the EOI HvCall. This is done by XmPciLpEvent.c */ static void iSeries_end_IRQ(unsigned int irq) { diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S index 09f14522e17..dfe7aa1ba09 100644 --- a/arch/powerpc/platforms/iseries/misc.S +++ b/arch/powerpc/platforms/iseries/misc.S @@ -15,6 +15,7 @@ #include <asm/processor.h> #include <asm/asm-offsets.h> +#include <asm/ppc_asm.h> .text diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index d3e4bf756c8..6a29f301436 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -39,7 +39,8 @@ #include <asm/sections.h> #include <asm/iommu.h> #include <asm/firmware.h> - +#include <asm/systemcfg.h> +#include <asm/system.h> #include <asm/time.h> #include <asm/paca.h> #include <asm/cache.h> @@ -71,7 +72,7 @@ extern void hvlog(char *fmt, ...); #endif /* Function Prototypes */ -static void build_iSeries_Memory_Map(void); +static unsigned long build_iSeries_Memory_Map(void); static void iseries_shared_idle(void); static void iseries_dedicated_idle(void); #ifdef CONFIG_PCI @@ -84,7 +85,6 @@ static void iSeries_pci_final_fixup(void) { } int piranha_simulator; extern int rd_size; /* Defined in drivers/block/rd.c */ -extern unsigned long klimit; extern unsigned long embedded_sysmap_start; extern unsigned long embedded_sysmap_end; @@ -403,9 +403,11 @@ void mschunks_alloc(unsigned long num_chunks) * a table used to translate Linux's physical addresses to these * absolute addresses. Absolute addresses are needed when * communicating with the hypervisor (e.g. to build HPT entries) + * + * Returns the physical memory size */ -static void __init build_iSeries_Memory_Map(void) +static unsigned long __init build_iSeries_Memory_Map(void) { u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; u32 nextPhysChunk; @@ -538,7 +540,7 @@ static void __init build_iSeries_Memory_Map(void) * which should be equal to * nextPhysChunk */ - systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk); + return chunk_to_addr(nextPhysChunk); } /* @@ -564,8 +566,8 @@ static void __init iSeries_setup_arch(void) printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", systemcfg->processor); + _systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; + printk("Processor version = %x\n", _systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) @@ -694,20 +696,18 @@ static void iseries_shared_idle(void) if (hvlpevent_is_pending()) process_iSeries_events(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } static void iseries_dedicated_idle(void) { - long oldval; + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched()) { ppc64_runlatch_off(); HMT_low(); @@ -720,13 +720,12 @@ static void iseries_dedicated_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -931,7 +930,7 @@ void dt_cpus(struct iseries_flat_dt *dt) dt_end_node(dt); } -void build_flat_dt(struct iseries_flat_dt *dt) +void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) { u64 tmp[2]; @@ -947,7 +946,7 @@ void build_flat_dt(struct iseries_flat_dt *dt) dt_prop_str(dt, "name", "memory"); dt_prop_str(dt, "device_type", "memory"); tmp[0] = 0; - tmp[1] = systemcfg->physicalMemorySize; + tmp[1] = phys_mem_size; dt_prop_u64_list(dt, "reg", tmp, 2); dt_end_node(dt); @@ -967,13 +966,15 @@ void build_flat_dt(struct iseries_flat_dt *dt) void * __init iSeries_early_setup(void) { + unsigned long phys_mem_size; + iSeries_fixup_klimit(); /* * Initialize the table which translate Linux physical addresses to * AS/400 absolute addresses */ - build_iSeries_Memory_Map(); + phys_mem_size = build_iSeries_Memory_Map(); iSeries_get_cmdline(); @@ -983,7 +984,7 @@ void * __init iSeries_early_setup(void) /* Parse early parameters, in particular mem=x */ parse_early_param(); - build_flat_dt(&iseries_dt); + build_flat_dt(&iseries_dt, phys_mem_size); return (void *) __pa(&iseries_dt); } diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 340c21caeae..895aeb3f75d 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -380,9 +380,6 @@ void __init maple_pcibios_fixup(void) for_each_pci_dev(dev) pci_read_irq_line(dev); - /* Do the mapping of the IO space */ - phbs_remap_io(); - DBG(" <- maple_pcibios_fixup\n"); } diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 8f818d092e2..dfd41b9781a 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -918,9 +918,6 @@ void __init pmac_pci_init(void) PCI_DN(np)->busno = 0xf0; } - /* map in PCI I/O space */ - phbs_remap_io(); - /* pmac_check_ht_link(); */ /* Tell pci.c to not use the common resource allocation mechanism */ diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 83a49e80ac2..90040c49494 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index e1f9443cc87..957b0910342 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -305,9 +305,19 @@ static int __init smp_psurge_probe(void) psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* this is not actually strictly necessary -- paulus. */ - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; + /* + * This is necessary because OF doesn't know about the + * secondary cpu(s), and thus there aren't nodes in the + * device tree for them, and smp_setup_cpu_maps hasn't + * set their bits in cpu_possible_map and cpu_present_map. + */ + if (ncpus > NR_CPUS) + ncpus = NR_CPUS; + for (i = 1; i < ncpus ; ++i) { + cpu_set(i, cpu_present_map); + cpu_set(i, cpu_possible_map); + set_hard_smp_processor_id(i, i); + } if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); @@ -348,6 +358,7 @@ static void __init psurge_dual_sync_tb(int cpu_nr) int t; set_dec(tb_ticks_per_jiffy); + /* XXX fixme */ set_tb(0, 0); last_jiffy_stamp(cpu_nr) = 0; @@ -363,8 +374,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr) /* now interrupt the secondary, starting both TBs */ psurge_set_ipi(1); - - smp_tb_synchronized = 1; } static struct irqaction psurge_irqaction = { @@ -625,9 +634,8 @@ void smp_core99_give_timebase(void) for (t = 100000; t > 0 && sec_tb_reset; --t) udelay(10); if (sec_tb_reset) + /* XXX BUG_ON here? */ printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); - else - smp_tb_synchronized = 1; /* Now, restart the timebase by leaving the GPIO to an open collector */ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); @@ -810,19 +818,9 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) } -/* Core99 Macs (dual G4s and G5s) */ -struct smp_ops_t core99_smp_ops = { - .message_pass = smp_mpic_message_pass, - .probe = smp_core99_probe, - .kick_cpu = smp_core99_kick_cpu, - .setup_cpu = smp_core99_setup_cpu, - .give_timebase = smp_core99_give_timebase, - .take_timebase = smp_core99_take_timebase, -}; - #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) -int __cpu_disable(void) +int smp_core99_cpu_disable(void) { cpu_clear(smp_processor_id(), cpu_online_map); @@ -846,7 +844,7 @@ void cpu_die(void) low_cpu_die(); } -void __cpu_die(unsigned int cpu) +void smp_core99_cpu_die(unsigned int cpu) { int timeout; @@ -858,8 +856,21 @@ void __cpu_die(unsigned int cpu) } msleep(1); } - cpu_callin_map[cpu] = 0; cpu_dead[cpu] = 0; } #endif + +/* Core99 Macs (dual G4s and G5s) */ +struct smp_ops_t core99_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_core99_probe, + .kick_cpu = smp_core99_kick_cpu, + .setup_cpu = smp_core99_setup_cpu, + .give_timebase = smp_core99_give_timebase, + .take_timebase = smp_core99_take_timebase, +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) + .cpu_disable = smp_core99_cpu_disable, + .cpu_die = smp_core99_cpu_die, +#endif +}; diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index b9938fece78..e7ca5b1f591 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -3,3 +3,5 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o +obj-$(CONFIG_SCANLOG) += scanlog.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o diff --git a/arch/ppc64/kernel/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 035d1b14a20..79de2310e70 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1,39 +1,37 @@ /* * eeh.c * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/bootmem.h> +#include <linux/delay.h> #include <linux/init.h> #include <linux/list.h> -#include <linux/mm.h> -#include <linux/notifier.h> #include <linux/pci.h> #include <linux/proc_fs.h> #include <linux/rbtree.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <asm/atomic.h> #include <asm/eeh.h> +#include <asm/eeh_event.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/rtas.h> -#include <asm/atomic.h> -#include <asm/systemcfg.h> #include <asm/ppc-pci.h> +#include <asm/rtas.h> #undef DEBUG @@ -49,8 +47,8 @@ * were "empty": all reads return 0xff's and all writes are silently * ignored. EEH slot isolation events can be triggered by parity * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by dust, vibration, humidity, - * radioactivity or plain-old failed hardware. + * which in turn might be caused by low voltage on the bus, dust, + * vibration, humidity, radioactivity or plain-old failed hardware. * * Note, however, that one of the leading causes of EEH slot * freeze events are buggy device drivers, buggy device microcode, @@ -71,26 +69,15 @@ * and sent out for processing. */ -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* EEH event workqueue setup. */ -static DEFINE_SPINLOCK(eeh_eventlist_lock); -LIST_HEAD(eeh_eventlist); -static void eeh_event_handler(void *); -DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL); - -static struct notifier_block *eeh_notifier_chain; - -/* - * If a device driver keeps reading an MMIO register in an interrupt +/* If a device driver keeps reading an MMIO register in an interrupt * handler after a slot isolation event has occurred, we assume it * is broken and panic. This sets the threshold for how many read * attempts we allow before panicking. */ -#define EEH_MAX_FAILS 1000 -static atomic_t eeh_fail_count; +#define EEH_MAX_FAILS 100000 + +/* Misc forward declaraions */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); /* RTAS tokens */ static int ibm_set_eeh_option; @@ -101,12 +88,19 @@ static int ibm_slot_error_detail; static int eeh_subsystem_enabled; +/* Lock to avoid races due to multiple reports of an error */ +static DEFINE_SPINLOCK(confirm_error_lock); + /* Buffer for reporting slot-error-detail rtas calls */ static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(slot_errbuf_lock); static int eeh_error_buf_size; /* System monitoring statistics */ +static DEFINE_PER_CPU(unsigned long, no_device); +static DEFINE_PER_CPU(unsigned long, no_dn); +static DEFINE_PER_CPU(unsigned long, no_cfg_addr); +static DEFINE_PER_CPU(unsigned long, ignored_check); static DEFINE_PER_CPU(unsigned long, total_mmio_ffs); static DEFINE_PER_CPU(unsigned long, false_positives); static DEFINE_PER_CPU(unsigned long, ignored_failures); @@ -224,9 +218,9 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, while (*p) { parent = *p; piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (alo < piar->addr_lo) { + if (ahi < piar->addr_lo) { p = &parent->rb_left; - } else if (ahi > piar->addr_hi) { + } else if (alo > piar->addr_hi) { p = &parent->rb_right; } else { if (dev != piar->pcidev || @@ -245,6 +239,11 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, piar->pcidev = dev; piar->flags = flags; +#ifdef DEBUG + printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", + alo, ahi, pci_name (dev)); +#endif + rb_link_node(&piar->rb_node, parent, p); rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); @@ -260,18 +259,17 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", - pci_name(dev)); + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); return; } /* Skip any devices for which EEH is not enabled. */ - pdn = dn->data; + pdn = PCI_DN(dn); if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s\n", - pci_name(dev)); + printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", + pci_name(dev), pdn->node->full_name); #endif return; } @@ -307,7 +305,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) * we maintain a cache of devices that can be quickly searched. * This routine adds a device to that cache. */ -void pci_addr_cache_insert_device(struct pci_dev *dev) +static void pci_addr_cache_insert_device(struct pci_dev *dev) { unsigned long flags; @@ -350,7 +348,7 @@ restart: * the tree multiple times (once per resource). * But so what; device removal doesn't need to be that fast. */ -void pci_addr_cache_remove_device(struct pci_dev *dev) +static void pci_addr_cache_remove_device(struct pci_dev *dev) { unsigned long flags; @@ -370,8 +368,12 @@ void pci_addr_cache_remove_device(struct pci_dev *dev) */ void __init pci_addr_cache_build(void) { + struct device_node *dn; struct pci_dev *dev = NULL; + if (!eeh_subsystem_enabled) + return; + spin_lock_init(&pci_io_addr_cache_root.piar_lock); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { @@ -380,6 +382,10 @@ void __init pci_addr_cache_build(void) continue; } pci_addr_cache_insert_device(dev); + + /* Save the BAR's; firmware doesn't restore these after EEH reset */ + dn = pci_device_to_OF_node(dev); + eeh_save_bars(dev, PCI_DN(dn)); } #ifdef DEBUG @@ -391,22 +397,26 @@ void __init pci_addr_cache_build(void) /* --------------------------------------------------------------- */ /* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ -/** - * eeh_register_notifier - Register to find out about EEH events. - * @nb: notifier block to callback on events - */ -int eeh_register_notifier(struct notifier_block *nb) +void eeh_slot_error_detail (struct pci_dn *pdn, int severity) { - return notifier_chain_register(&eeh_notifier_chain, nb); -} + unsigned long flags; + int rc; -/** - * eeh_unregister_notifier - Unregister to an EEH event notifier. - * @nb: notifier block to callback on events - */ -int eeh_unregister_notifier(struct notifier_block *nb) -{ - return notifier_chain_unregister(&eeh_notifier_chain, nb); + /* Log the error with the rtas logger */ + spin_lock_irqsave(&slot_errbuf_lock, flags); + memset(slot_errbuf, 0, eeh_error_buf_size); + + rc = rtas_call(ibm_slot_error_detail, + 8, 1, NULL, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), NULL, 0, + virt_to_phys(slot_errbuf), + eeh_error_buf_size, + severity); + + if (rc == 0) + log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); + spin_unlock_irqrestore(&slot_errbuf_lock, flags); } /** @@ -414,16 +424,16 @@ int eeh_unregister_notifier(struct notifier_block *nb) * @dn: device node to read * @rets: array to return results in */ -static int read_slot_reset_state(struct device_node *dn, int rets[]) +static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) { int token, outputs; - struct pci_dn *pdn = dn->data; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; outputs = 4; } else { token = ibm_read_slot_reset_state; + rets[2] = 0; /* fake PE Unavailable info */ outputs = 3; } @@ -432,87 +442,84 @@ static int read_slot_reset_state(struct device_node *dn, int rets[]) } /** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot + * eeh_token_to_phys - convert EEH address token to phys address + * @token i/o token, should be address in the form 0xA.... */ -static void eeh_panic(struct pci_dev *dev, int reset_state) +static inline unsigned long eeh_token_to_phys(unsigned long token) { - /* - * XXX We should create a separate sysctl for this. - * - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - else { - __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } + pte_t *ptep; + unsigned long pa; + + ptep = find_linux_pte(init_mm.pgd, token); + if (!ptep) + return token; + pa = pte_pfn(*ptep) << PAGE_SHIFT; + + return pa | (token & (PAGE_SIZE-1)); } -/** - * eeh_event_handler - dispatch EEH events. The detection of a frozen - * slot can occur inside an interrupt, where it can be hard to do - * anything about it. The goal of this routine is to pull these - * detection events out of the context of the interrupt handler, and - * re-dispatch them for processing at a later time in a normal context. - * - * @dummy - unused +/** + * Return the "partitionable endpoint" (pe) under which this device lies */ -static void eeh_event_handler(void *dummy) +static struct device_node * find_device_pe(struct device_node *dn) { - unsigned long flags; - struct eeh_event *event; - - while (1) { - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - if (event == NULL) - break; - - printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s\n", event->reset_state, - pci_name(event->dev)); + while ((dn->parent) && PCI_DN(dn->parent) && + (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { + dn = dn->parent; + } + return dn; +} - atomic_set(&eeh_fail_count, 0); - notifier_call_chain (&eeh_notifier_chain, - EEH_NOTIFY_FREEZE, event); +/** Mark all devices that are peers of this device as failed. + * Mark the device driver too, so that it can see the failure + * immediately; this is critical, since some drivers poll + * status registers in interrupts ... If a driver is polling, + * and the slot is frozen, then the driver can deadlock in + * an interrupt context, which is bad. + */ - __get_cpu_var(slot_resets)++; +static void __eeh_mark_slot (struct device_node *dn, int mode_flag) +{ + while (dn) { + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode |= mode_flag; - pci_dev_put(event->dev); - kfree(event); + if (dn->child) + __eeh_mark_slot (dn->child, mode_flag); + } + dn = dn->sibling; } } -/** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xE.... - */ -static inline unsigned long eeh_token_to_phys(unsigned long token) +void eeh_mark_slot (struct device_node *dn, int mode_flag) { - pte_t *ptep; - unsigned long pa; + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode |= mode_flag; + __eeh_mark_slot (dn->child, mode_flag); +} - ptep = find_linux_pte(init_mm.pgd, token); - if (!ptep) - return token; - pa = pte_pfn(*ptep) << PAGE_SHIFT; +static void __eeh_clear_slot (struct device_node *dn, int mode_flag) +{ + while (dn) { + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + if (dn->child) + __eeh_clear_slot (dn->child, mode_flag); + } + dn = dn->sibling; + } +} - return pa | (token & (PAGE_SIZE-1)); +void eeh_clear_slot (struct device_node *dn, int mode_flag) +{ + unsigned long flags; + spin_lock_irqsave(&confirm_error_lock, flags); + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + __eeh_clear_slot (dn->child, mode_flag); + spin_unlock_irqrestore(&confirm_error_lock, flags); } /** @@ -526,7 +533,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) * will query firmware for the EEH status. * * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a solt isolation event notification. + * a non-zero value and queues up a slot isolation event notification. * * It is safe to call this routine in an interrupt context. */ @@ -535,42 +542,59 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int ret; int rets[3]; unsigned long flags; - int rc, reset_state; - struct eeh_event *event; struct pci_dn *pdn; + int rc = 0; __get_cpu_var(total_mmio_ffs)++; if (!eeh_subsystem_enabled) return 0; - if (!dn) + if (!dn) { + __get_cpu_var(no_dn)++; return 0; - pdn = dn->data; + } + pdn = PCI_DN(dn); /* Access to IO BARs might get this far and still not want checking. */ - if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { + __get_cpu_var(ignored_check)++; +#ifdef DEBUG + printk ("EEH:ignored check (%x) for %s %s\n", + pdn->eeh_mode, pci_name (dev), dn->full_name); +#endif return 0; } if (!pdn->eeh_config_addr) { + __get_cpu_var(no_cfg_addr)++; return 0; } - /* - * If we already have a pending isolation event for this - * slot, we know it's bad already, we don't need to check... + /* If we already have a pending isolation event for this + * slot, we know it's bad already, we don't need to check. + * Do this checking under a lock; as multiple PCI devices + * in one slot might report errors simultaneously, and we + * only want one error recovery routine running. */ + spin_lock_irqsave(&confirm_error_lock, flags); + rc = 1; if (pdn->eeh_mode & EEH_MODE_ISOLATED) { - atomic_inc(&eeh_fail_count); - if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { + pdn->eeh_check_count ++; + if (pdn->eeh_check_count >= EEH_MAX_FAILS) { + printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n", + pdn->eeh_check_count); + dump_stack(); + /* re-read the slot reset state */ - if (read_slot_reset_state(dn, rets) != 0) + if (read_slot_reset_state(pdn, rets) != 0) rets[0] = -1; /* reset state unknown */ - eeh_panic(dev, rets[0]); + + /* If we are here, then we hit an infinite loop. Stop. */ + panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev)); } - return 0; + goto dn_unlock; } /* @@ -580,66 +604,69 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * function zero of a multi-function device. * In any case they must share a common PHB. */ - ret = read_slot_reset_state(dn, rets); - if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) { + ret = read_slot_reset_state(pdn, rets); + + /* If the call to firmware failed, punt */ + if (ret != 0) { + printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n", + ret, dn->full_name); __get_cpu_var(false_positives)++; - return 0; + rc = 0; + goto dn_unlock; } - /* prevent repeated reports of this failure */ - pdn->eeh_mode |= EEH_MODE_ISOLATED; - - reset_state = rets[0]; - - spin_lock_irqsave(&slot_errbuf_lock, flags); - memset(slot_errbuf, 0, eeh_error_buf_size); - - rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), NULL, 0, - virt_to_phys(slot_errbuf), - eeh_error_buf_size, - 1 /* Temporary Error */); - - if (rc == 0) - log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); - spin_unlock_irqrestore(&slot_errbuf_lock, flags); + /* If EEH is not supported on this device, punt. */ + if (rets[1] != 1) { + printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", + ret, dn->full_name); + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n", - rets[0], dn->name, dn->full_name); - event = kmalloc(sizeof(*event), GFP_ATOMIC); - if (event == NULL) { - eeh_panic(dev, reset_state); - return 1; - } + /* If not the kind of error we know about, punt. */ + if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - event->dev = dev; - event->dn = dn; - event->reset_state = reset_state; + /* Note that config-io to empty slots may fail; + * we recognize empty because they don't have children. */ + if ((rets[0] == 5) && (dn->child == NULL)) { + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - /* We may or may not be called in an interrupt context */ - spin_lock_irqsave(&eeh_eventlist_lock, flags); - list_add(&event->list, &eeh_eventlist); - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + __get_cpu_var(slot_resets)++; + + /* Avoid repeated reports of this failure, including problems + * with other functions on this device, and functions under + * bridges. */ + eeh_mark_slot (dn, EEH_MODE_ISOLATED); + spin_unlock_irqrestore(&confirm_error_lock, flags); + eeh_send_failure_event (dn, dev, rets[0], rets[2]); + /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ - dump_stack(); - schedule_work(&eeh_event_wq); + if (rets[0] != 5) dump_stack(); + return 1; - return 0; +dn_unlock: + spin_unlock_irqrestore(&confirm_error_lock, flags); + return rc; } -EXPORT_SYMBOL(eeh_dn_check_failure); +EXPORT_SYMBOL_GPL(eeh_dn_check_failure); /** * eeh_check_failure - check if all 1's data is due to EEH slot freeze * @token i/o token, should be address in the form 0xA.... * @val value, should be all 1's (XXX why do we need this arg??) * - * Check for an eeh failure at the given token address. * Check for an EEH failure at the given token address. Call this * routine if the result of a read was all 0xff's and you want to * find out if this is due to an EEH slot freeze event. This routine @@ -656,8 +683,10 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon /* Finding the phys addr + pci device; this is pretty quick. */ addr = eeh_token_to_phys((unsigned long __force) token); dev = pci_get_device_by_addr(addr); - if (!dev) + if (!dev) { + __get_cpu_var(no_device)++; return val; + } dn = pci_device_to_OF_node(dev); eeh_dn_check_failure (dn, dev); @@ -668,6 +697,217 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); +/* ------------------------------------------------------------- */ +/* The code below deals with error recovery */ + +/** Return negative value if a permanent error, else return + * a number of milliseconds to wait until the PCI slot is + * ready to be used. + */ +static int +eeh_slot_availability(struct pci_dn *pdn) +{ + int rc; + int rets[3]; + + rc = read_slot_reset_state(pdn, rets); + + if (rc) return rc; + + if (rets[1] == 0) return -1; /* EEH is not supported */ + if (rets[0] == 0) return 0; /* Oll Korrect */ + if (rets[0] == 5) { + if (rets[2] == 0) return -1; /* permanently unavailable */ + return rets[2]; /* number of millisecs to wait */ + } + return -1; +} + +/** rtas_pci_slot_reset raises/lowers the pci #RST line + * state: 1/0 to raise/lower the #RST + * + * Clear the EEH-frozen condition on a slot. This routine + * asserts the PCI #RST line if the 'state' argument is '1', + * and drops the #RST line if 'state is '0'. This routine is + * safe to call in an interrupt context. + * + */ + +static void +rtas_pci_slot_reset(struct pci_dn *pdn, int state) +{ + int rc; + + BUG_ON (pdn==NULL); + + if (!pdn->phb) { + printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", + pdn->node->full_name); + return; + } + + rc = rtas_call(ibm_set_slot_reset,4,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), + state); + if (rc) { + printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", + rc, state, pdn->node->full_name); + return; + } +} + +/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second + * dn -- device node to be reset. + */ + +void +rtas_set_slot_reset(struct pci_dn *pdn) +{ + int i, rc; + + rtas_pci_slot_reset (pdn, 1); + + /* The PCI bus requires that the reset be held high for at least + * a 100 milliseconds. We wait a bit longer 'just in case'. */ + +#define PCI_BUS_RST_HOLD_TIME_MSEC 250 + msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + + /* We might get hit with another EEH freeze as soon as the + * pci slot reset line is dropped. Make sure we don't miss + * these, and clear the flag now. */ + eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); + + rtas_pci_slot_reset (pdn, 0); + + /* After a PCI slot has been reset, the PCI Express spec requires + * a 1.5 second idle time for the bus to stabilize, before starting + * up traffic. */ +#define PCI_BUS_SETTLE_TIME_MSEC 1800 + msleep (PCI_BUS_SETTLE_TIME_MSEC); + + /* Now double check with the firmware to make sure the device is + * ready to be used; if not, wait for recovery. */ + for (i=0; i<10; i++) { + rc = eeh_slot_availability (pdn); + if (rc <= 0) break; + + msleep (rc+100); + } +} + +/* ------------------------------------------------------- */ +/** Save and restore of PCI BARs + * + * Although firmware will set up BARs during boot, it doesn't + * set up device BAR's after a device reset, although it will, + * if requested, set up bridge configuration. Thus, we need to + * configure the PCI devices ourselves. + */ + +/** + * __restore_bars - Restore the Base Address Registers + * Loads the PCI configuration space base address registers, + * the expansion ROM base address, the latency timer, and etc. + * from the saved values in the device node. + */ +static inline void __restore_bars (struct pci_dn *pdn) +{ + int i; + + if (NULL==pdn->phb) return; + for (i=4; i<10; i++) { + rtas_write_config(pdn, i*4, 4, pdn->config_space[i]); + } + + /* 12 == Expansion ROM Address */ + rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]); + +#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) +#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) + + rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + SAVED_BYTE(PCI_CACHE_LINE_SIZE)); + + rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + SAVED_BYTE(PCI_LATENCY_TIMER)); + + /* max latency, min grant, interrupt pin and line */ + rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); +} + +/** + * eeh_restore_bars - restore the PCI config space info + * + * This routine performs a recursive walk to the children + * of this device as well. + */ +void eeh_restore_bars(struct pci_dn *pdn) +{ + struct device_node *dn; + if (!pdn) + return; + + if (! pdn->eeh_is_bridge) + __restore_bars (pdn); + + dn = pdn->node->child; + while (dn) { + eeh_restore_bars (PCI_DN(dn)); + dn = dn->sibling; + } +} + +/** + * eeh_save_bars - save device bars + * + * Save the values of the device bars. Unlike the restore + * routine, this routine is *not* recursive. This is because + * PCI devices are added individuallly; but, for the restore, + * an entire slot is reset at a time. + */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +{ + int i; + + if (!pdev || !pdn ) + return; + + for (i = 0; i < 16; i++) + pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]); + + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdn->eeh_is_bridge = 1; +} + +void +rtas_configure_bridge(struct pci_dn *pdn) +{ + int token = rtas_token ("ibm,configure-bridge"); + int rc; + + if (token == RTAS_UNKNOWN_SERVICE) + return; + rc = rtas_call(token,3,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid)); + if (rc) { + printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", + rc, pdn->node->full_name); + } +} + +/* ------------------------------------------------------------- */ +/* The code below deals with enabling EEH for devices during the + * early boot sequence. EEH must be enabled before any PCI probing + * can be done. + */ + +#define EEH_ENABLE 1 + struct eeh_early_enable_info { unsigned int buid_hi; unsigned int buid_lo; @@ -684,9 +924,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data) u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); u32 *regs; int enable; - struct pci_dn *pdn = dn->data; + struct pci_dn *pdn = PCI_DN(dn); pdn->eeh_mode = 0; + pdn->eeh_check_count = 0; + pdn->eeh_freeze_count = 0; if (status && strcmp(status, "ok") != 0) return NULL; /* ignore devices with bad status */ @@ -723,8 +965,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* First register entry is addr (00BBSS00) */ /* Try to enable eeh */ ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); + regs[0], info->buid_hi, info->buid_lo, + EEH_ENABLE); + if (ret == 0) { eeh_subsystem_enabled = 1; pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -736,7 +979,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* This device doesn't support EEH, but it may have an * EEH parent, in which case we mark it as supported. */ - if (dn->parent && dn->parent->data + if (dn->parent && PCI_DN(dn->parent) && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -749,7 +992,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) dn->full_name); } - return NULL; + return NULL; } /* @@ -770,6 +1013,9 @@ void __init eeh_init(void) struct device_node *phb, *np; struct eeh_early_enable_info info; + spin_lock_init(&confirm_error_lock); + spin_lock_init(&slot_errbuf_lock); + np = of_find_node_by_path("/rtas"); if (np == NULL) return; @@ -797,13 +1043,11 @@ void __init eeh_init(void) for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; - struct pci_dn *pci; buid = get_phb_buid(phb); - if (buid == 0 || phb->data == NULL) + if (buid == 0 || PCI_DN(phb) == NULL) continue; - pci = phb->data; info.buid_lo = BUID_LO(buid); info.buid_hi = BUID_HI(buid); traverse_pci_devices(phb, early_enable_eeh, &info); @@ -832,11 +1076,13 @@ void eeh_add_device_early(struct device_node *dn) struct pci_controller *phb; struct eeh_early_enable_info info; - if (!dn || !dn->data) + if (!dn || !PCI_DN(dn)) return; phb = PCI_DN(dn)->phb; if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none\n"); + printk(KERN_WARNING "EEH: Expected buid but found none for %s\n", + dn->full_name); + dump_stack(); return; } @@ -844,7 +1090,7 @@ void eeh_add_device_early(struct device_node *dn) info.buid_lo = BUID_LO(phb->buid); early_enable_eeh(dn, &info); } -EXPORT_SYMBOL(eeh_add_device_early); +EXPORT_SYMBOL_GPL(eeh_add_device_early); /** * eeh_add_device_late - perform EEH initialization for the indicated pci device @@ -855,6 +1101,9 @@ EXPORT_SYMBOL(eeh_add_device_early); */ void eeh_add_device_late(struct pci_dev *dev) { + struct device_node *dn; + struct pci_dn *pdn; + if (!dev || !eeh_subsystem_enabled) return; @@ -862,9 +1111,15 @@ void eeh_add_device_late(struct pci_dev *dev) printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); #endif + pci_dev_get (dev); + dn = pci_device_to_OF_node(dev); + pdn = PCI_DN(dn); + pdn->pcidev = dev; + pci_addr_cache_insert_device (dev); + eeh_save_bars(dev, pdn); } -EXPORT_SYMBOL(eeh_add_device_late); +EXPORT_SYMBOL_GPL(eeh_add_device_late); /** * eeh_remove_device - undo EEH setup for the indicated pci device @@ -875,6 +1130,7 @@ EXPORT_SYMBOL(eeh_add_device_late); */ void eeh_remove_device(struct pci_dev *dev) { + struct device_node *dn; if (!dev || !eeh_subsystem_enabled) return; @@ -883,20 +1139,29 @@ void eeh_remove_device(struct pci_dev *dev) printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); #endif pci_addr_cache_remove_device(dev); + + dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->pcidev = NULL; + pci_dev_put (dev); } -EXPORT_SYMBOL(eeh_remove_device); +EXPORT_SYMBOL_GPL(eeh_remove_device); static int proc_eeh_show(struct seq_file *m, void *v) { unsigned int cpu; unsigned long ffs = 0, positives = 0, failures = 0; unsigned long resets = 0; + unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0; for_each_cpu(cpu) { ffs += per_cpu(total_mmio_ffs, cpu); positives += per_cpu(false_positives, cpu); failures += per_cpu(ignored_failures, cpu); resets += per_cpu(slot_resets, cpu); + no_dev += per_cpu(no_device, cpu); + no_dn += per_cpu(no_dn, cpu); + no_cfg += per_cpu(no_cfg_addr, cpu); + no_check += per_cpu(ignored_check, cpu); } if (0 == eeh_subsystem_enabled) { @@ -904,13 +1169,17 @@ static int proc_eeh_show(struct seq_file *m, void *v) seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs); } else { seq_printf(m, "EEH Subsystem is enabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n" - "eeh_false_positives=%ld\n" - "eeh_ignored_failures=%ld\n" - "eeh_slot_resets=%ld\n" - "eeh_fail_count=%d\n", - ffs, positives, failures, resets, - eeh_fail_count.counter); + seq_printf(m, + "no device=%ld\n" + "no device node=%ld\n" + "no config address=%ld\n" + "check not wanted=%ld\n" + "eeh_total_mmio_ffs=%ld\n" + "eeh_false_positives=%ld\n" + "eeh_ignored_failures=%ld\n" + "eeh_slot_resets=%ld\n", + no_dev, no_dn, no_cfg, no_check, + ffs, positives, failures, resets); } return 0; @@ -932,7 +1201,7 @@ static int __init eeh_init_proc(void) { struct proc_dir_entry *e; - if (systemcfg->platform & PLATFORM_PSERIES) { + if (platform_is_pseries()) { e = create_proc_entry("ppc64/eeh", 0, NULL); if (e) e->proc_fops = &proc_eeh_operations; diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c new file mode 100644 index 00000000000..92497333c2b --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -0,0 +1,155 @@ +/* + * eeh_event.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas <linas@linas.org> + */ + +#include <linux/list.h> +#include <linux/pci.h> +#include <asm/eeh_event.h> + +/** Overview: + * EEH error states may be detected within exception handlers; + * however, the recovery processing needs to occur asynchronously + * in a normal kernel context and not an interrupt context. + * This pair of routines creates an event and queues it onto a + * work-queue, where a worker thread can drive recovery. + */ + +/* EEH event workqueue setup. */ +static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED; +LIST_HEAD(eeh_eventlist); +static void eeh_thread_launcher(void *); +DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL); + +/** + * eeh_panic - call panic() for an eeh event that cannot be handled. + * The philosophy of this routine is that it is better to panic and + * halt the OS than it is to risk possible data corruption by + * oblivious device drivers that don't know better. + * + * @dev pci device that had an eeh event + * @reset_state current reset state of the device slot + */ +static void eeh_panic(struct pci_dev *dev, int reset_state) +{ + /* + * Since the panic_on_oops sysctl is used to halt the system + * in light of potential corruption, we can use it here. + */ + if (panic_on_oops) { + panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, + pci_name(dev)); + } + else { + printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", + reset_state, pci_name(dev)); + } +} + +/** + * eeh_event_handler - dispatch EEH events. The detection of a frozen + * slot can occur inside an interrupt, where it can be hard to do + * anything about it. The goal of this routine is to pull these + * detection events out of the context of the interrupt handler, and + * re-dispatch them for processing at a later time in a normal context. + * + * @dummy - unused + */ +static int eeh_event_handler(void * dummy) +{ + unsigned long flags; + struct eeh_event *event; + + daemonize ("eehd"); + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&eeh_eventlist_lock, flags); + event = NULL; + if (!list_empty(&eeh_eventlist)) { + event = list_entry(eeh_eventlist.next, struct eeh_event, list); + list_del(&event->list); + } + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + if (event == NULL) + break; + + printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", + pci_name(event->dev)); + + eeh_panic (event->dev, event->state); + + kfree(event); + } + + return 0; +} + +/** + * eeh_thread_launcher + * + * @dummy - unused + */ +static void eeh_thread_launcher(void *dummy) +{ + if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0) + printk(KERN_ERR "Failed to start EEH daemon\n"); +} + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev, + int state, + int time_unavail) +{ + unsigned long flags; + struct eeh_event *event; + + event = kmalloc(sizeof(*event), GFP_ATOMIC); + if (event == NULL) { + printk (KERN_ERR "EEH: out of memory, event not handled\n"); + return 1; + } + + if (dev) + pci_dev_get(dev); + + event->dn = dn; + event->dev = dev; + event->state = state; + event->time_unavail = time_unavail; + + /* We may or may not be called in an interrupt context */ + spin_lock_irqsave(&eeh_eventlist_lock, flags); + list_add(&event->list, &eeh_eventlist); + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + + schedule_work(&eeh_event_wq); + + return 0; +} + +/********************** END OF FILE ******************************/ diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index fcc50bfd43f..97ba5214417 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -42,7 +42,6 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/pSeries_reconfig.h> -#include <asm/systemcfg.h> #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> @@ -582,7 +581,7 @@ void iommu_init_early_pSeries(void) return; } - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c198656a3bb..999a9620b5c 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -107,7 +107,6 @@ static void __init pSeries_request_regions(void) void __init pSeries_final_fixup(void) { - phbs_remap_io(); pSeries_request_regions(); pci_addr_cache_build(); @@ -123,7 +122,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev) int i; unsigned int reg; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return; printk("Using INTC for W82c105 IDE controller.\n"); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index d7d40033945..d8864164dbe 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -408,7 +408,7 @@ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return 0; ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e26b0420b6d..a6f628d4c9d 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -27,7 +27,6 @@ #include <asm/prom.h> #include <asm/nvram.h> #include <asm/atomic.h> -#include <asm/systemcfg.h> #if 0 #define DEBUG(A...) printk(KERN_ERR A) @@ -482,10 +481,12 @@ static int __init rtas_init(void) { struct proc_dir_entry *entry; - /* No RTAS, only warn if we are on a pSeries box */ + if (!platform_is_pseries()) + return 0; + + /* No RTAS */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { - if (systemcfg->platform & PLATFORM_PSERIES) - printk(KERN_INFO "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: no event-scan on system\n"); return 1; } diff --git a/arch/ppc64/kernel/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 2edc947f7c4..2edc947f7c4 100644 --- a/arch/ppc64/kernel/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index e78c3936884..31990829310 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -249,7 +249,7 @@ static void __init pSeries_setup_arch(void) ppc_md.idle_loop = default_idle; } - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; else ppc_md.enable_pmcs = power4_enable_pmcs; @@ -306,9 +306,7 @@ static void __init fw_feature_init(void) } of_node_put(dn); - no_rtas: - printk(KERN_INFO "firmware_features = 0x%lx\n", - ppc64_firmware_features); +no_rtas: DBG(" <- fw_feature_init()\n"); } @@ -378,7 +376,7 @@ static void __init pSeries_init_early(void) fw_feature_init(); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) hpte_init_lpar(); else { hpte_init_native(); @@ -388,7 +386,7 @@ static void __init pSeries_init_early(void) generic_find_legacy_serial_ports(&physport, &default_speed); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) find_udbg_vterm(); else if (physport) { /* Map the uart for udbg. */ @@ -469,6 +467,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu) * more. */ clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); /* * SMT dynamic mode. Cede will result in this thread going @@ -481,6 +480,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu) cede_processor(); else local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); } else { /* * Give the HV an opportunity at the processor, since we are @@ -492,11 +492,11 @@ static inline void dedicated_idle_sleep(unsigned int cpu) static void pseries_dedicated_idle(void) { - long oldval; struct paca_struct *lpaca = get_paca(); unsigned int cpu = smp_processor_id(); unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { /* @@ -505,10 +505,7 @@ static void pseries_dedicated_idle(void) */ lpaca->lppaca.idle = 1; - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { start_snooze = __get_tb() + *smt_snooze_delay * tb_ticks_per_usec; @@ -531,15 +528,14 @@ static void pseries_dedicated_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } lpaca->lppaca.idle = 0; ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -583,7 +579,9 @@ static void pseries_shared_idle(void) lpaca->lppaca.idle = 0; ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -592,7 +590,7 @@ static void pseries_shared_idle(void) static int pSeries_pci_probe_mode(struct pci_bus *bus) { - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 7a243e8ccd7..5800cde7d5a 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -46,6 +46,7 @@ #include <asm/rtas.h> #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> +#include <asm/vdso_datapage.h> #include "plpar_wrappers.h" @@ -96,7 +97,7 @@ int pSeries_cpu_disable(void) int cpu = smp_processor_id(); cpu_clear(cpu, cpu_online_map); - systemcfg->processorCount--; + vdso_data->processorCount--; /*fix boot_cpuid here*/ if (cpu == boot_cpuid) @@ -441,7 +442,7 @@ void __init smp_init_pSeries(void) smp_ops->cpu_die = pSeries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (platform_is_lpar()) pSeries_reconfig_notifier_register(&pSeries_smp_nb); #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index c72c86f05cb..72ac18067ec 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -545,7 +545,9 @@ nextnode: of_node_put(np); } - if (systemcfg->platform == PLATFORM_PSERIES) { + if (platform_is_lpar()) + ops = &pSeriesLP_ops; + else { #ifdef CONFIG_SMP for_each_cpu(i) { int hard_id; @@ -561,12 +563,11 @@ nextnode: #else xics_per_cpu[0] = ioremap(intr_base, intr_size); #endif /* CONFIG_SMP */ - } else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { - ops = &pSeriesLP_ops; } xics_8259_pic.enable = i8259_pic.enable; xics_8259_pic.disable = i8259_pic.disable; + xics_8259_pic.end = i8259_pic.end; for (i = 0; i < 16; ++i) get_irq_desc(i)->handler = &xics_8259_pic; for (; i < NR_IRQS; ++i) diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index 543d6590981..f32baf7f469 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -226,7 +226,7 @@ static void iommu_table_u3_setup(void) iommu_table_u3.it_busno = 0; iommu_table_u3.it_offset = 0; /* it_size is in number of entries */ - iommu_table_u3.it_size = dart_tablesize / sizeof(u32); + iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; /* Initialize the common IOMMU code */ iommu_table_u3.it_base = (unsigned long)dart_vbase; diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 79a784f0e7a..b20312e5ed2 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -8,4 +8,4 @@ obj-$(CONFIG_8xx) += start_8xx.o obj-$(CONFIG_6xx) += start_32.o obj-$(CONFIG_4xx) += start_32.o obj-$(CONFIG_PPC64) += start_64.o -obj-y += xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o +obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c new file mode 100644 index 00000000000..78765833f4c --- /dev/null +++ b/arch/powerpc/xmon/nonstdio.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <asm/time.h> +#include "nonstdio.h" + +int xmon_putchar(int c) +{ + char ch = c; + + if (c == '\n') + xmon_putchar('\r'); + return xmon_write(&ch, 1) == 1? c: -1; +} + +static char line[256]; +static char *lineptr; +static int lineleft; + +int xmon_expect(const char *str, unsigned long timeout) +{ + int c; + unsigned long t0; + + /* assume 25MHz default timebase if tb_ticks_per_sec not set yet */ + timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000; + t0 = get_tbl(); + do { + lineptr = line; + for (;;) { + c = xmon_read_poll(); + if (c == -1) { + if (get_tbl() - t0 > timeout) + return 0; + continue; + } + if (c == '\n') + break; + if (c != '\r' && lineptr < &line[sizeof(line) - 1]) + *lineptr++ = c; + } + *lineptr = 0; + } while (strstr(line, str) == NULL); + return 1; +} + +int xmon_getchar(void) +{ + int c; + + if (lineleft == 0) { + lineptr = line; + for (;;) { + c = xmon_readchar(); + if (c == -1 || c == 4) + break; + if (c == '\r' || c == '\n') { + *lineptr++ = '\n'; + xmon_putchar('\n'); + break; + } + switch (c) { + case 0177: + case '\b': + if (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + case 'U' & 0x1F: + while (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + default: + if (lineptr >= &line[sizeof(line) - 1]) + xmon_putchar('\a'); + else { + xmon_putchar(c); + *lineptr++ = c; + } + } + } + lineleft = lineptr - line; + lineptr = line; + } + if (lineleft == 0) + return -1; + --lineleft; + return *lineptr++; +} + +char *xmon_gets(char *str, int nb) +{ + char *p; + int c; + + for (p = str; p < str + nb - 1; ) { + c = xmon_getchar(); + if (c == -1) { + if (p == str) + return NULL; + break; + } + *p++ = c; + if (c == '\n') + break; + } + *p = 0; + return str; +} + +void xmon_printf(const char *format, ...) +{ + va_list args; + int n; + static char xmon_outbuf[1024]; + + va_start(args, format); + n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args); + va_end(args); + xmon_write(xmon_outbuf, n); +} diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h index 84211a21c6f..47cebbd2b1b 100644 --- a/arch/powerpc/xmon/nonstdio.h +++ b/arch/powerpc/xmon/nonstdio.h @@ -1,22 +1,14 @@ -typedef int FILE; -extern FILE *xmon_stdin, *xmon_stdout; #define EOF (-1) -#define stdin xmon_stdin -#define stdout xmon_stdout + #define printf xmon_printf -#define fprintf xmon_fprintf -#define fputs xmon_fputs -#define fgets xmon_fgets #define putchar xmon_putchar -#define getchar xmon_getchar -#define putc xmon_putc -#define getc xmon_getc -#define fopen(n, m) NULL -#define fflush(f) do {} while (0) -#define fclose(f) do {} while (0) -extern char *fgets(char *, int, void *); -extern void xmon_printf(const char *, ...); -extern void xmon_fprintf(void *, const char *, ...); -extern void xmon_sprintf(char *, const char *, ...); -#define perror(s) printf("%s: no files!\n", (s)) +extern int xmon_putchar(int c); +extern int xmon_getchar(void); +extern char *xmon_gets(char *, int); +extern void xmon_printf(const char *, ...); +extern void xmon_map_scc(void); +extern int xmon_expect(const char *str, unsigned long timeout); +extern int xmon_write(void *ptr, int nb); +extern int xmon_readchar(void); +extern int xmon_read_poll(void); diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S index f8e40dfd2bf..96a91f10e2e 100644 --- a/arch/powerpc/xmon/setjmp.S +++ b/arch/powerpc/xmon/setjmp.S @@ -14,61 +14,61 @@ _GLOBAL(xmon_setjmp) mflr r0 - STL r0,0(r3) - STL r1,SZL(r3) - STL r2,2*SZL(r3) + PPC_STL r0,0(r3) + PPC_STL r1,SZL(r3) + PPC_STL r2,2*SZL(r3) mfcr r0 - STL r0,3*SZL(r3) - STL r13,4*SZL(r3) - STL r14,5*SZL(r3) - STL r15,6*SZL(r3) - STL r16,7*SZL(r3) - STL r17,8*SZL(r3) - STL r18,9*SZL(r3) - STL r19,10*SZL(r3) - STL r20,11*SZL(r3) - STL r21,12*SZL(r3) - STL r22,13*SZL(r3) - STL r23,14*SZL(r3) - STL r24,15*SZL(r3) - STL r25,16*SZL(r3) - STL r26,17*SZL(r3) - STL r27,18*SZL(r3) - STL r28,19*SZL(r3) - STL r29,20*SZL(r3) - STL r30,21*SZL(r3) - STL r31,22*SZL(r3) + PPC_STL r0,3*SZL(r3) + PPC_STL r13,4*SZL(r3) + PPC_STL r14,5*SZL(r3) + PPC_STL r15,6*SZL(r3) + PPC_STL r16,7*SZL(r3) + PPC_STL r17,8*SZL(r3) + PPC_STL r18,9*SZL(r3) + PPC_STL r19,10*SZL(r3) + PPC_STL r20,11*SZL(r3) + PPC_STL r21,12*SZL(r3) + PPC_STL r22,13*SZL(r3) + PPC_STL r23,14*SZL(r3) + PPC_STL r24,15*SZL(r3) + PPC_STL r25,16*SZL(r3) + PPC_STL r26,17*SZL(r3) + PPC_STL r27,18*SZL(r3) + PPC_STL r28,19*SZL(r3) + PPC_STL r29,20*SZL(r3) + PPC_STL r30,21*SZL(r3) + PPC_STL r31,22*SZL(r3) li r3,0 blr _GLOBAL(xmon_longjmp) - CMPI r4,0 + PPC_LCMPI r4,0 bne 1f li r4,1 -1: LDL r13,4*SZL(r3) - LDL r14,5*SZL(r3) - LDL r15,6*SZL(r3) - LDL r16,7*SZL(r3) - LDL r17,8*SZL(r3) - LDL r18,9*SZL(r3) - LDL r19,10*SZL(r3) - LDL r20,11*SZL(r3) - LDL r21,12*SZL(r3) - LDL r22,13*SZL(r3) - LDL r23,14*SZL(r3) - LDL r24,15*SZL(r3) - LDL r25,16*SZL(r3) - LDL r26,17*SZL(r3) - LDL r27,18*SZL(r3) - LDL r28,19*SZL(r3) - LDL r29,20*SZL(r3) - LDL r30,21*SZL(r3) - LDL r31,22*SZL(r3) - LDL r0,3*SZL(r3) +1: PPC_LL r13,4*SZL(r3) + PPC_LL r14,5*SZL(r3) + PPC_LL r15,6*SZL(r3) + PPC_LL r16,7*SZL(r3) + PPC_LL r17,8*SZL(r3) + PPC_LL r18,9*SZL(r3) + PPC_LL r19,10*SZL(r3) + PPC_LL r20,11*SZL(r3) + PPC_LL r21,12*SZL(r3) + PPC_LL r22,13*SZL(r3) + PPC_LL r23,14*SZL(r3) + PPC_LL r24,15*SZL(r3) + PPC_LL r25,16*SZL(r3) + PPC_LL r26,17*SZL(r3) + PPC_LL r27,18*SZL(r3) + PPC_LL r28,19*SZL(r3) + PPC_LL r29,20*SZL(r3) + PPC_LL r30,21*SZL(r3) + PPC_LL r31,22*SZL(r3) + PPC_LL r0,3*SZL(r3) mtcrf 0x38,r0 - LDL r0,0(r3) - LDL r1,SZL(r3) - LDL r2,2*SZL(r3) + PPC_LL r0,0(r3) + PPC_LL r1,SZL(r3) + PPC_LL r2,2*SZL(r3) mtlr r0 mr r3,r4 blr @@ -84,52 +84,52 @@ _GLOBAL(xmon_longjmp) * different ABIs, though). */ _GLOBAL(xmon_save_regs) - STL r0,0*SZL(r3) - STL r2,2*SZL(r3) - STL r3,3*SZL(r3) - STL r4,4*SZL(r3) - STL r5,5*SZL(r3) - STL r6,6*SZL(r3) - STL r7,7*SZL(r3) - STL r8,8*SZL(r3) - STL r9,9*SZL(r3) - STL r10,10*SZL(r3) - STL r11,11*SZL(r3) - STL r12,12*SZL(r3) - STL r13,13*SZL(r3) - STL r14,14*SZL(r3) - STL r15,15*SZL(r3) - STL r16,16*SZL(r3) - STL r17,17*SZL(r3) - STL r18,18*SZL(r3) - STL r19,19*SZL(r3) - STL r20,20*SZL(r3) - STL r21,21*SZL(r3) - STL r22,22*SZL(r3) - STL r23,23*SZL(r3) - STL r24,24*SZL(r3) - STL r25,25*SZL(r3) - STL r26,26*SZL(r3) - STL r27,27*SZL(r3) - STL r28,28*SZL(r3) - STL r29,29*SZL(r3) - STL r30,30*SZL(r3) - STL r31,31*SZL(r3) + PPC_STL r0,0*SZL(r3) + PPC_STL r2,2*SZL(r3) + PPC_STL r3,3*SZL(r3) + PPC_STL r4,4*SZL(r3) + PPC_STL r5,5*SZL(r3) + PPC_STL r6,6*SZL(r3) + PPC_STL r7,7*SZL(r3) + PPC_STL r8,8*SZL(r3) + PPC_STL r9,9*SZL(r3) + PPC_STL r10,10*SZL(r3) + PPC_STL r11,11*SZL(r3) + PPC_STL r12,12*SZL(r3) + PPC_STL r13,13*SZL(r3) + PPC_STL r14,14*SZL(r3) + PPC_STL r15,15*SZL(r3) + PPC_STL r16,16*SZL(r3) + PPC_STL r17,17*SZL(r3) + PPC_STL r18,18*SZL(r3) + PPC_STL r19,19*SZL(r3) + PPC_STL r20,20*SZL(r3) + PPC_STL r21,21*SZL(r3) + PPC_STL r22,22*SZL(r3) + PPC_STL r23,23*SZL(r3) + PPC_STL r24,24*SZL(r3) + PPC_STL r25,25*SZL(r3) + PPC_STL r26,26*SZL(r3) + PPC_STL r27,27*SZL(r3) + PPC_STL r28,28*SZL(r3) + PPC_STL r29,29*SZL(r3) + PPC_STL r30,30*SZL(r3) + PPC_STL r31,31*SZL(r3) /* go up one stack frame for SP */ - LDL r4,0(r1) - STL r4,1*SZL(r3) + PPC_LL r4,0(r1) + PPC_STL r4,1*SZL(r3) /* get caller's LR */ - LDL r0,LRSAVE(r4) - STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) - STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) + PPC_LL r0,LRSAVE(r4) + PPC_STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) mfmsr r0 - STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) mfctr r0 - STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) mfxer r0 - STL r0,_XER-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_XER-STACK_FRAME_OVERHEAD(r3) mfcr r0 - STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) li r0,0 - STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) blr diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c index 69b658c0f76..c2464df4217 100644 --- a/arch/powerpc/xmon/start_32.c +++ b/arch/powerpc/xmon/start_32.c @@ -11,7 +11,6 @@ #include <linux/cuda.h> #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/sysrq.h> #include <linux/bitops.h> #include <asm/xmon.h> #include <asm/prom.h> @@ -22,10 +21,11 @@ #include <asm/processor.h> #include <asm/delay.h> #include <asm/btext.h> +#include <asm/time.h> +#include "nonstdio.h" static volatile unsigned char __iomem *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; -static int xmon_expect(const char *str, unsigned int timeout); static int use_serial; static int use_screen; @@ -33,16 +33,6 @@ static int via_modem; static int xmon_use_sccb; static struct device_node *channel_node; -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - void buf_access(void) { if (DLAB) @@ -91,23 +81,7 @@ static unsigned long chrp_find_phys_io_base(void) } #endif /* CONFIG_PPC_CHRP */ -#ifdef CONFIG_MAGIC_SYSRQ -static void sysrq_handle_xmon(int key, struct pt_regs *regs, - struct tty_struct *tty) -{ - xmon(regs); -} - -static struct sysrq_key_op sysrq_xmon_op = -{ - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; -#endif - -void -xmon_map_scc(void) +void xmon_map_scc(void) { #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char __iomem *base; @@ -217,8 +191,6 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; #endif /* platform */ - - register_sysrq_key('x', &sysrq_xmon_op); } static int scc_initialized = 0; @@ -238,8 +210,7 @@ static inline void do_poll_adb(void) #endif /* CONFIG_ADB_CUDA */ } -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { char *p = ptr; int i, c, ct; @@ -311,8 +282,7 @@ static unsigned char xmon_shift_keytab[128] = "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ -static int -xmon_get_adb_key(void) +static int xmon_get_adb_key(void) { int k, t, on; @@ -350,32 +320,21 @@ xmon_get_adb_key(void) } #endif /* CONFIG_BOOTX_TEXT */ -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - #ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - for (i = 0; i < nb; ++i) - *p++ = xmon_get_adb_key(); - return i; - } + if (use_screen) + return xmon_get_adb_key(); #endif - if (!scc_initialized) - xmon_init_scc(); - for (i = 0; i < nb; ++i) { + if (!scc_initialized) + xmon_init_scc(); while ((*sccc & RXRDY) == 0) - do_poll_adb(); + do_poll_adb(); buf_access(); - *p++ = *sccd; - } - return i; + return *sccd; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if ((*sccc & RXRDY) == 0) { do_poll_adb(); @@ -395,8 +354,7 @@ static unsigned char scc_inittab[] = { 3, 0xc1, /* rx enable, 8 bits */ }; -void -xmon_init_scc(void) +void xmon_init_scc(void) { if ( _machine == _MACH_chrp ) { @@ -410,6 +368,7 @@ xmon_init_scc(void) else if ( _machine == _MACH_Pmac ) { int i, x; + unsigned long timeout; if (channel_node != 0) pmac_call_feature( @@ -424,8 +383,12 @@ xmon_init_scc(void) PMAC_FTR_MODEM_ENABLE, channel_node, 0, 1); printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = readtb(); - while (readtb() - t0 < 3*TB_SPEED) + t0 = get_tbl(); + timeout = 3 * tb_ticks_per_sec; + if (timeout == 0) + /* assume 25MHz if tb_ticks_per_sec not set */ + timeout = 75000000; + while (get_tbl() - t0 < timeout) eieio(); } /* use the B channel if requested */ @@ -447,164 +410,19 @@ xmon_init_scc(void) scc_initialized = 1; if (via_modem) { for (;;) { - xmon_write(NULL, "ATE1V1\r", 7); + xmon_write("ATE1V1\r", 7); if (xmon_expect("OK", 5)) { - xmon_write(NULL, "ATA\r", 4); + xmon_write("ATA\r", 4); if (xmon_expect("CONNECT", 40)) break; } - xmon_write(NULL, "+++", 3); + xmon_write("+++", 3); xmon_expect("OK", 3); } } } -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -int xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -xmon_enter(void) +void xmon_enter(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { @@ -613,8 +431,7 @@ xmon_enter(void) #endif } -void -xmon_leave(void) +void xmon_leave(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start_64.c index e50c158191e..712552c4f24 100644 --- a/arch/powerpc/xmon/start_64.c +++ b/arch/powerpc/xmon/start_64.c @@ -6,182 +6,29 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/sysrq.h> -#include <linux/init.h> #include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/prom.h> -#include <asm/processor.h> #include <asm/udbg.h> -#include <asm/system.h> #include "nonstdio.h" -#ifdef CONFIG_MAGIC_SYSRQ - -static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, - struct tty_struct *tty) -{ - /* ensure xmon is enabled */ - xmon_init(1); - debugger(pt_regs); -} - -static struct sysrq_key_op sysrq_xmon_op = +void xmon_map_scc(void) { - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; - -static int __init setup_xmon_sysrq(void) -{ - register_sysrq_key('x', &sysrq_xmon_op); - return 0; } -__initcall(setup_xmon_sysrq); -#endif /* CONFIG_MAGIC_SYSRQ */ -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { return udbg_write(ptr, nb); } -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - return udbg_read(ptr, nb); + if (udbg_getc) + return udbg_getc(); + return -1; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if (udbg_getc_poll) return udbg_getc_poll(); return -1; } - -FILE *xmon_stdin; -FILE *xmon_stdout; - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c index a48bd594cf6..4c17b0486ad 100644 --- a/arch/powerpc/xmon/start_8xx.c +++ b/arch/powerpc/xmon/start_8xx.c @@ -15,273 +15,30 @@ #include <asm/8xx_immap.h> #include <asm/mpc8xx.h> #include <asm/commproc.h> +#include "nonstdio.h" -extern void xmon_printf(const char *fmt, ...); extern int xmon_8xx_write(char *str, int nb); extern int xmon_8xx_read_poll(void); extern int xmon_8xx_read_char(void); -void prom_drawhex(uint); -void prom_drawstring(const char *str); -static int use_screen = 1; /* default */ - -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - -void buf_access(void) -{ -} - -void -xmon_map_scc(void) +void xmon_map_scc(void) { - cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - use_screen = 0; - - prom_drawstring("xmon uses serial port\n"); } -static int scc_initialized = 0; - void xmon_init_scc(void); -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { - char *p = ptr; - int i, c, ct; - - if (!scc_initialized) - xmon_init_scc(); - return(xmon_8xx_write(ptr, nb)); } -int xmon_wants_key; - -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - - if (!scc_initialized) - xmon_init_scc(); - - for (i = 0; i < nb; ++i) { - *p++ = xmon_8xx_read_char(); - } - return i; + return xmon_8xx_read_char(); } -int -xmon_read_poll(void) +int xmon_read_poll(void) { return(xmon_8xx_read_poll()); } - -void -xmon_init_scc() -{ - scc_initialized = 1; -} - -#if 0 -extern int (*prom_entry)(void *); - -int -xmon_exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom_entry)(&args); - } -} -#endif - -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -void -xmon_init(void) -{ -} - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -#if 0 -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} -#endif - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return 0; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -prom_drawhex(uint val) -{ - unsigned char buf[10]; - - int i; - for (i = 7; i >= 0; i--) - { - buf[i] = "0123456789abcdef"[val & 0x0f]; - val >>= 4; - } - buf[8] = '\0'; - xmon_fputs(buf, xmon_stdout); -} - -void -prom_drawstring(const char *str) -{ - xmon_fputs(str, xmon_stdout); -} diff --git a/arch/powerpc/xmon/subr_prf.c b/arch/powerpc/xmon/subr_prf.c deleted file mode 100644 index b48738c6dd3..00000000000 --- a/arch/powerpc/xmon/subr_prf.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Written by Cort Dougan to replace the version originally used - * by Paul Mackerras, which came from NetBSD and thus had copyright - * conflicts with Linux. - * - * This file makes liberal use of the standard linux utility - * routines to reduce the size of the binary. We assume we can - * trust some parts of Linux inside the debugger. - * -- Cort (cort@cs.nmt.edu) - * - * Copyright (C) 1999 Cort Dougan. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/module.h> -#include <stdarg.h> -#include "nonstdio.h" - -extern int xmon_write(void *, void *, int); - -void xmon_vfprintf(void *f, const char *fmt, va_list ap) -{ - static char xmon_buf[2048]; - int n; - - n = vsprintf(xmon_buf, fmt, ap); - xmon_write(f, xmon_buf, n); -} - -void xmon_printf(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(stdout, fmt, ap); - va_end(ap); -} -EXPORT_SYMBOL(xmon_printf); - -void xmon_fprintf(void *f, const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(f, fmt, ap); - va_end(ap); -} - diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1124f114620..ef4356b29a9 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1,7 +1,7 @@ /* * Routines providing a simple monitor for use on the PowerMac. * - * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 1996-2005 Paul Mackerras. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,6 +18,7 @@ #include <linux/kallsyms.h> #include <linux/cpumask.h> #include <linux/module.h> +#include <linux/sysrq.h> #include <asm/ptrace.h> #include <asm/string.h> @@ -144,15 +145,10 @@ static void xmon_print_symbol(unsigned long address, const char *mid, static const char *getvecname(unsigned long vec); extern int print_insn_powerpc(unsigned long, unsigned long, int); -extern void printf(const char *fmt, ...); -extern void xmon_vfprintf(void *f, const char *fmt, va_list ap); -extern int xmon_putc(int c, void *f); -extern int putchar(int ch); extern void xmon_enter(void); extern void xmon_leave(void); -extern int xmon_read_poll(void); extern long setjmp(long *); extern void longjmp(long *, long); extern void xmon_save_regs(struct pt_regs *); @@ -748,7 +744,6 @@ cmds(struct pt_regs *excp) printf("%x:", smp_processor_id()); #endif /* CONFIG_SMP */ printf("mon> "); - fflush(stdout); flush_input(); termch = 0; cmd = skipbl(); @@ -1472,17 +1467,23 @@ read_spr(int n) { unsigned int instrs[2]; unsigned long (*code)(void); - unsigned long opd[3]; unsigned long ret = -1UL; +#ifdef CONFIG_PPC64 + unsigned long opd[3]; - instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); - instrs[1] = 0x4e800020; opd[0] = (unsigned long)instrs; opd[1] = 0; opd[2] = 0; + code = (unsigned long (*)(void)) opd; +#else + code = (unsigned long (*)(void)) instrs; +#endif + + /* mfspr r3,n; blr */ + instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); + instrs[1] = 0x4e800020; store_inst(instrs); store_inst(instrs+1); - code = (unsigned long (*)(void)) opd; if (setjmp(bus_error_jmp) == 0) { catch_memory_errors = 1; @@ -1504,16 +1505,21 @@ write_spr(int n, unsigned long val) { unsigned int instrs[2]; unsigned long (*code)(unsigned long); +#ifdef CONFIG_PPC64 unsigned long opd[3]; - instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); - instrs[1] = 0x4e800020; opd[0] = (unsigned long)instrs; opd[1] = 0; opd[2] = 0; + code = (unsigned long (*)(unsigned long)) opd; +#else + code = (unsigned long (*)(unsigned long)) instrs; +#endif + + instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); + instrs[1] = 0x4e800020; store_inst(instrs); store_inst(instrs+1); - code = (unsigned long (*)(unsigned long)) opd; if (setjmp(bus_error_jmp) == 0) { catch_memory_errors = 1; @@ -1797,7 +1803,7 @@ memex(void) for(;;){ if (!mnoread) n = mread(adrs, val, size); - printf("%.16x%c", adrs, brev? 'r': ' '); + printf(REG"%c", adrs, brev? 'r': ' '); if (!mnoread) { if (brev) byterev(val, size); @@ -1976,17 +1982,18 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & 7) == 0 && m > 0) - putchar(' '); + if ((m & (sizeof(long) - 1)) == 0 && m > 0) + putchar(' '); if (m < nr) printf("%.2x", temp[m]); else printf("%s", fault_chars[fault_type]); } - if (m <= 8) - printf(" "); - for (; m < 16; ++m) + for (; m < 16; ++m) { + if ((m & (sizeof(long) - 1)) == 0) + putchar(' '); printf(" "); + } printf(" |"); for (m = 0; m < r; ++m) { if (m < nr) { @@ -2151,7 +2158,6 @@ memzcan(void) ok = mread(a, &v, 1); if (ok && !ook) { printf("%.8x .. ", a); - fflush(stdout); } else if (!ok && ook) printf("%.8x\n", a - mskip); ook = ok; @@ -2372,7 +2378,7 @@ int inchar(void) { if (lineptr == NULL || *lineptr == 0) { - if (fgets(line, sizeof(line), stdin) == NULL) { + if (xmon_gets(line, sizeof(line)) == NULL) { lineptr = NULL; return EOF; } @@ -2526,4 +2532,29 @@ void xmon_init(int enable) __debugger_dabr_match = NULL; __debugger_fault_handler = NULL; } + xmon_map_scc(); +} + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) +{ + /* ensure xmon is enabled */ + xmon_init(1); + debugger(pt_regs); +} + +static struct sysrq_key_op sysrq_xmon_op = +{ + .handler = sysrq_handle_xmon, + .help_msg = "Xmon", + .action_msg = "Entering xmon", +}; + +static int __init setup_xmon_sysrq(void) +{ + register_sysrq_key('x', &sysrq_xmon_op); + return 0; } +__initcall(setup_xmon_sysrq); +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h index 69173df76db..4ed88acfa73 100644 --- a/arch/ppc/boot/include/of1275.h +++ b/arch/ppc/boot/include/of1275.h @@ -19,6 +19,9 @@ extern prom_entry of_prom_entry; /* function declarations */ +int call_prom(const char *service, int nargs, int nret, ...); +int call_prom_ret(const char *service, int nargs, int nret, + unsigned int *rets, ...); void * claim(unsigned int virt, unsigned int size, unsigned int align); int map(unsigned int phys, unsigned int virt, unsigned int size); void enter(void); diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile index 02e6f235d7c..0b979c00497 100644 --- a/arch/ppc/boot/of1275/Makefile +++ b/arch/ppc/boot/of1275/Makefile @@ -3,4 +3,4 @@ # lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o \ - ofstdio.o read.o release.o write.o map.o + ofstdio.o read.o release.o write.o map.o call_prom.o diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c new file mode 100644 index 00000000000..9479a3a2b8c --- /dev/null +++ b/arch/ppc/boot/of1275/call_prom.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include "of1275.h" +#include <stdarg.h> + +int call_prom(const char *service, int nargs, int nret, ...) +{ + int i; + struct prom_args { + const char *service; + int nargs; + int nret; + unsigned int args[12]; + } args; + va_list list; + + args.service = service; + args.nargs = nargs; + args.nret = nret; + + va_start(list, nret); + for (i = 0; i < nargs; i++) + args.args[i] = va_arg(list, unsigned int); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (of_prom_entry(&args) < 0) + return -1; + + return (nret > 0)? args.args[nargs]: 0; +} + +int call_prom_ret(const char *service, int nargs, int nret, + unsigned int *rets, ...) +{ + int i; + struct prom_args { + const char *service; + int nargs; + int nret; + unsigned int args[12]; + } args; + va_list list; + + args.service = service; + args.nargs = nargs; + args.nret = nret; + + va_start(list, rets); + for (i = 0; i < nargs; i++) + args.args[i] = va_arg(list, unsigned int); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (of_prom_entry(&args) < 0) + return -1; + + if (rets != (void *) 0) + for (i = 1; i < nret; ++i) + rets[i-1] = args.args[nargs+i]; + + return (nret > 0)? args.args[nargs]: 0; +} diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c index 13169a5c433..1ed3aeeff8a 100644 --- a/arch/ppc/boot/of1275/claim.c +++ b/arch/ppc/boot/of1275/claim.c @@ -9,27 +9,84 @@ */ #include "of1275.h" +#include "nonstdio.h" -void * -claim(unsigned int virt, unsigned int size, unsigned int align) +/* + * Older OF's require that when claiming a specific range of addresses, + * we claim the physical space in the /memory node and the virtual + * space in the chosen mmu node, and then do a map operation to + * map virtual to physical. + */ +static int need_map = -1; +static ihandle chosen_mmu; +static phandle memory; + +/* returns true if s2 is a prefix of s1 */ +static int string_match(const char *s1, const char *s2) +{ + for (; *s2; ++s2) + if (*s1++ != *s2) + return 0; + return 1; +} + +static int check_of_version(void) +{ + phandle oprom, chosen; + char version[64]; + + oprom = finddevice("/openprom"); + if (oprom == OF_INVALID_HANDLE) + return 0; + if (getprop(oprom, "model", version, sizeof(version)) <= 0) + return 0; + version[sizeof(version)-1] = 0; + printf("OF version = '%s'\n", version); + if (!string_match(version, "Open Firmware, 1.") + && !string_match(version, "FirmWorks,3.")) + return 0; + chosen = finddevice("/chosen"); + if (chosen == OF_INVALID_HANDLE) { + chosen = finddevice("/chosen@0"); + if (chosen == OF_INVALID_HANDLE) { + printf("no chosen\n"); + return 0; + } + } + if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) { + printf("no mmu\n"); + return 0; + } + memory = (ihandle) call_prom("open", 1, 1, "/memory"); + if (memory == OF_INVALID_HANDLE) { + memory = (ihandle) call_prom("open", 1, 1, "/memory@0"); + if (memory == OF_INVALID_HANDLE) { + printf("no memory node\n"); + return 0; + } + } + printf("old OF detected\n"); + return 1; +} + +void *claim(unsigned int virt, unsigned int size, unsigned int align) { - struct prom_args { - char *service; - int nargs; - int nret; - unsigned int virt; - unsigned int size; - unsigned int align; - void *ret; - } args; + int ret; + unsigned int result; - args.service = "claim"; - args.nargs = 3; - args.nret = 1; - args.virt = virt; - args.size = size; - args.align = align; - args.ret = (void *) 0; - (*of_prom_entry)(&args); - return args.ret; + if (need_map < 0) + need_map = check_of_version(); + if (align || !need_map) + return (void *) call_prom("claim", 3, 1, virt, size, align); + + ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory, + align, size, virt); + if (ret != 0 || result == -1) + return (void *) -1; + ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu, + align, size, virt); + /* 0x12 == coherent + read/write */ + ret = call_prom("call-method", 6, 1, "map", chosen_mmu, + 0x12, size, virt, virt); + return virt; } diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c index 2c0f7cbb793..0dcb1201b77 100644 --- a/arch/ppc/boot/of1275/finddevice.c +++ b/arch/ppc/boot/of1275/finddevice.c @@ -10,22 +10,7 @@ #include "of1275.h" -phandle -finddevice(const char *name) +phandle finddevice(const char *name) { - struct prom_args { - char *service; - int nargs; - int nret; - const char *devspec; - phandle device; - } args; - - args.service = "finddevice"; - args.nargs = 1; - args.nret = 1; - args.devspec = name; - args.device = OF_INVALID_HANDLE; - (*of_prom_entry)(&args); - return args.device; + return (phandle) call_prom("finddevice", 1, 1, name); } diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 03415238fab..83a6433459c 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -80,8 +80,7 @@ $(obj)/note: $(utils)/mknote FORCE $(call if_changed,mknote) -$(obj)/coffcrt0.o: EXTRA_AFLAGS := -traditional -DXCOFF -$(obj)/crt0.o: EXTRA_AFLAGS := -traditional +$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF targets += coffcrt0.o crt0.o $(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE $(call if_changed_dep,as_o_S) diff --git a/arch/ppc/configs/mpc834x_sys_defconfig b/arch/ppc/configs/mpc834x_sys_defconfig index 4a5522ca820..673dc64ebcb 100644 --- a/arch/ppc/configs/mpc834x_sys_defconfig +++ b/arch/ppc/configs/mpc834x_sys_defconfig @@ -1,16 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Thu Feb 17 16:12:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 15:38:29 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -18,23 +19,28 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -59,34 +66,84 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_GEN550=y -CONFIG_83xx=y - -# -# Freescale 83xx options -# -CONFIG_MPC834x_SYS=y -CONFIG_MPC834x=y CONFIG_PPC_STD_MMU=y # # Platform options # +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_APUS is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +CONFIG_MPC834x_SYS=y +# CONFIG_EV64360 is not set +CONFIG_83xx=y +CONFIG_MPC834x=y # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_GENERIC_ISA_DMA=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_MPC83xx_PCI2 is not set +CONFIG_PCI_LEGACY_PROC=y # # PCCARD (PCMCIA/CardBus) support @@ -94,10 +151,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -112,6 +165,75 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -123,6 +245,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -140,15 +267,19 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Block devices # # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -159,6 +290,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -169,6 +305,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -179,110 +316,116 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_IEEE1394 is not set # # I2O device support # +# CONFIG_I2O is not set # # Macintosh device drivers # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# SCTP Configuration (EXPERIMENTAL) +# ARCnet devices # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set +# CONFIG_ARCNET is not set # -# QoS and/or fair queueing +# PHY device support # -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set +CONFIG_PHYLIB=y # -# Network testing +# MII PHY device drivers # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -293,10 +436,14 @@ CONFIG_GIANFAR=y # Wan interfaces # # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -323,14 +470,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -340,6 +479,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_VT is not set @@ -358,6 +503,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -376,6 +522,7 @@ CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver @@ -385,6 +532,12 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# # I2C support # CONFIG_I2C=y @@ -400,23 +553,68 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -427,33 +625,26 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -479,11 +670,12 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # @@ -502,10 +694,15 @@ CONFIG_I2C_MPC=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -515,17 +712,16 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -546,12 +742,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -580,6 +774,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -588,6 +783,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -614,6 +810,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set @@ -625,7 +822,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SERIAL_TEXT_DEBUG is not set # diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 76a55a438f2..17a4da65e27 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -12,7 +12,7 @@ extra-$(CONFIG_6xx) += idle_6xx.o extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds -obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ +obj-y := entry.o traps.o idle.o time.o misc.o \ process.o align.o \ setup.o \ ppc_htab.o @@ -38,8 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := irq.o idle.o \ - align.o +obj-y := idle.o align.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index 968261d6957..fe0e767fb94 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -25,6 +25,7 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/thread_info.h> +#include <asm/vdso_datapage.h> #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -143,5 +144,32 @@ main(void) DEFINE(TASK_SIZE, TASK_SIZE); DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28); + + /* datapage offsets for use by vdso */ + DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp)); + DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec)); + DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs)); + DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec)); + DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count)); + DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest)); + DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime)); + DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32)); + DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec)); + DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); + DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); + DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); + DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); + + /* timeval/timezone offsets for use by vdso */ + DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); + DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); + + /* Other bits used by the vdso */ + DEFINE(CLOCK_REALTIME, CLOCK_REALTIME); + DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC); + DEFINE(NSEC_PER_SEC, NSEC_PER_SEC); + DEFINE(CLOCK_REALTIME_RES, TICK_NSEC); + return 0; } diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index aeb349b47af..f3d274c6b23 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -358,6 +358,6 @@ label: NORMAL_EXCEPTION_PROLOG; \ bne load_up_fpu; /* if from user, just load it up */ \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_EE_LITE(0x800, KernelFP) + EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) #endif /* __HEAD_BOOKE_H__ */ diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c index 11e5b44713f..821a75e4560 100644 --- a/arch/ppc/kernel/idle.c +++ b/arch/ppc/kernel/idle.c @@ -53,10 +53,6 @@ void default_idle(void) } #endif } - if (need_resched()) - schedule(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); } /* @@ -64,11 +60,22 @@ void default_idle(void) */ void cpu_idle(void) { - for (;;) - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); + int cpu = smp_processor_id(); + + for (;;) { + while (!need_resched()) { + if (ppc_md.idle != NULL) + ppc_md.idle(); + else + default_idle(); + } + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } #if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c deleted file mode 100644 index fbb2b9f8922..00000000000 --- a/arch/ppc/kernel/irq.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * arch/ppc/kernel/irq.c - * - * Derived from arch/i386/kernel/irq.c - * Copyright (C) 1992 Linus Torvalds - * Adapted from arch/i386 by Gary Thomas - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan <cort@fsmlabs.com> - * Copyright (C) 1996-2001 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - * - * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the - * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit - * mask register (of which only 16 are defined), hence the weird shifting - * and complement of the cached_irq_mask. I want to be able to stuff - * this right into the SIU SMASK register. - * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx - * to reduce code space and undefined function references. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/threads.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/proc_fs.h> -#include <linux/random.h> -#include <linux/seq_file.h> -#include <linux/cpumask.h> -#include <linux/profile.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/cache.h> -#include <asm/prom.h> -#include <asm/ptrace.h> -#include <asm/machdep.h> - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) - -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; - -#define MAXCOUNT 10000000 - -int ppc_spurious_interrupts = 0; -struct irqaction *ppc_irq_action[NR_IRQS]; -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -atomic_t ppc_n_lost_interrupts; - -#ifdef CONFIG_TAU_INT -extern int tau_initialized; -extern int tau_interrupts(int); -#endif - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) { - seq_puts(p, " "); - for (j=0; j<NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%d ", j); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if ( !action || !action->handler ) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", - kstat_cpu(j).irqs[i]); -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (irq_desc[i].handler) - seq_printf(p, " %s ", irq_desc[i].handler->typename); - else - seq_puts(p, " None "); - seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { -#ifdef CONFIG_TAU_INT - if (tau_initialized){ - seq_puts(p, "TAU: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", tau_interrupts(j)); - seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); - } -#endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - } - return 0; -} - -void do_IRQ(struct pt_regs *regs) -{ - int irq, first = 1; - irq_enter(); - - /* - * Every platform is required to implement ppc_md.get_irq. - * This function will either return an irq number or -1 to - * indicate there are no more pending. But the first time - * through the loop this means there wasn't and IRQ pending. - * The value -2 is for buggy hardware and means that this IRQ - * has already been handled. -- Tom - */ - while ((irq = ppc_md.get_irq(regs)) >= 0) { - __do_IRQ(irq, regs); - first = 0; - } - if (irq != -2 && first) - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - irq_exit(); -} - -void __init init_IRQ(void) -{ - ppc_md.init_IRQ(); -} diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index ae6af29938a..5e61124581d 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -497,9 +497,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * and invalidate the corresponding instruction cache blocks. * This is a no-op on the 601. * - * flush_icache_range(unsigned long start, unsigned long stop) + * __flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index e8f4e576750..48ed58f995c 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -62,20 +62,6 @@ struct pci_controller** hose_tail = &hose_head; static int pci_bus_count; static void -fixup_rev1_53c810(struct pci_dev* dev) -{ - /* rev 1 ncr53c810 chips don't set the class at all which means - * they don't get their resources remapped. Fix that here. - */ - - if ((dev->class == PCI_CLASS_NOT_DEFINED)) { - printk("NCR 53c810 rev 1 detected, setting PCI class.\n"); - dev->class = PCI_CLASS_STORAGE_SCSI; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); - -static void fixup_broken_pcnet32(struct pci_dev* dev) { if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index e0ca61b37f4..66073f77519 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -46,6 +46,7 @@ #include <asm/btext.h> #include <asm/div64.h> #include <asm/xmon.h> +#include <asm/signal.h> #ifdef CONFIG_8xx #include <asm/commproc.h> @@ -57,7 +58,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); @@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception); EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); EXPORT_SYMBOL(ppc_n_lost_interrupts); -EXPORT_SYMBOL(ppc_lost_interrupts); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); @@ -176,6 +175,7 @@ EXPORT_SYMBOL(pci_bus_to_phys); #endif /* CONFIG_PCI */ #ifdef CONFIG_NOT_COHERENT_CACHE +extern void flush_dcache_all(void); EXPORT_SYMBOL(flush_dcache_all); #endif @@ -217,9 +217,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_MULTIPLATFORM -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); EXPORT_SYMBOL(pmac_newworld); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 6bcb85d2b7f..dc55e1abc45 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -76,6 +76,7 @@ unsigned int DMA_MODE_WRITE; #ifdef CONFIG_PPC_MULTIPLATFORM int _machine = 0; +EXPORT_SYMBOL(_machine); extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index bc5bf112483..43b8fc2ca59 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -341,6 +341,7 @@ int __devinit start_secondary(void *unused) cpu = smp_processor_id(); smp_store_cpu_info(cpu); set_dec(tb_ticks_per_jiffy); + preempt_disable(); cpu_callin_map[cpu] = 1; printk("CPU %d done callin...\n", cpu); diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 79b3f533d0a..98edc75f410 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -51,6 +51,9 @@ #include <syslib/ppc83xx_setup.h> +static const char *GFAR_PHY_0 = "phy0:0"; +static const char *GFAR_PHY_1 = "phy0:1"; + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -97,6 +100,7 @@ mpc834x_sys_setup_arch(void) bd_t *binfo = (bd_t *) __res; unsigned int freq; struct gianfar_platform_data *pdata; + struct gianfar_mdio_data *mdata; /* get the core frequency */ freq = binfo->bi_intfreq; @@ -111,24 +115,27 @@ mpc834x_sys_setup_arch(void) #endif mpc83xx_early_serial_map(); + /* setup the board related info for the MDIO bus */ + mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO); + + mdata->irq[0] = MPC83xx_IRQ_EXT1; + mdata->irq[1] = MPC83xx_IRQ_EXT2; + mdata->irq[2] = -1; + mdata->irq[31] = -1; + mdata->paddr += binfo->bi_immr_base; + /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT1; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; + pdata->bus_id = GFAR_PHY_0; memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT2; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; + pdata->bus_id = GFAR_PHY_1; memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 95fdf4b0680..7bcc6c35a41 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -21,6 +21,7 @@ #include <linux/config.h> #include <linux/init.h> +#include <linux/seq_file.h> #include <asm/ppcboot.h> #define BOARD_CCSRBAR ((uint)0xe0000000) diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c index 9f2d95ea856..4742bf60935 100644 --- a/arch/ppc/platforms/pmac_pic.c +++ b/arch/ppc/platforms/pmac_pic.c @@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 067d7d53b81..4415748071d 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -61,6 +61,15 @@ #include <asm/pci-bridge.h> #include <asm/todc.h> +/* prep registers for L2 */ +#define CACHECRBA 0x80000823 /* Cache configuration register address */ +#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ +#define L2CACHE_512KB 0x00 /* 512KB */ +#define L2CACHE_256KB 0x01 /* 256KB */ +#define L2CACHE_1MB 0x02 /* 1MB */ +#define L2CACHE_NONE 0x03 /* NONE */ +#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ + TODC_ALLOC(); unsigned char ucSystemType; diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 5bd33baac24..5b7f2b80e56 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_PPC4xx_DMA) += ppc4xx_dma.o obj-$(CONFIG_PPC4xx_EDMA) += ppc4xx_sgdma.o ifeq ($(CONFIG_40x),y) obj-$(CONFIG_PCI) += pci_auto.o ppc405_pci.o -obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o endif endif obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ @@ -96,6 +95,7 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif +obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ mpc83xx_sys.o mpc83xx_devices.o ifeq ($(CONFIG_83xx),y) diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c index c867be6981c..29d95d415ce 100644 --- a/arch/ppc/syslib/cpm2_pic.c +++ b/arch/ppc/syslib/cpm2_pic.c @@ -37,7 +37,7 @@ static u_char irq_to_siureg[] = { static u_char irq_to_siubit[] = { 0, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, - 2, 1, 15, 14, 13, 12, 11, 10, + 2, 1, 0, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 0, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index dbf8acac507..f43fbf9a938 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -27,18 +27,20 @@ * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup */ +struct gianfar_mdio_data mpc83xx_mdio_pdata = { + .paddr = 0x24520, +}; + static struct gianfar_platform_data mpc83xx_tsec1_pdata = { .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | FSL_GIANFAR_DEV_HAS_MULTI_INTR, - .phy_reg_addr = 0x24000, }; static struct gianfar_platform_data mpc83xx_tsec2_pdata = { .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | FSL_GIANFAR_DEV_HAS_MULTI_INTR, - .phy_reg_addr = 0x24000, }; static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = { @@ -220,6 +222,12 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + [MPC83xx_MDIO] = { + .name = "fsl-gianfar_mdio", + .id = 0, + .dev.platform_data = &mpc83xx_mdio_pdata, + .num_resources = 0, + }, }; static int __init mach_mpc83xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index 29aa6335002..da743446789 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -24,72 +24,72 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8349E", .mask = 0xFFFF0000, .value = 0x80500000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8349", .mask = 0xFFFF0000, .value = 0x80510000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80520000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8347", .mask = 0xFFFF0000, .value = 0x80530000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8343E", .mask = 0xFFFF0000, .value = 0x80540000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, + MPC83xx_USB2_DR, MPC83xx_MDIO }, }, { .ppc_sys_name = "8343", .mask = 0xFFFF0000, .value = 0x80550000, - .num_devices = 6, + .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, + MPC83xx_USB2_DR, MPC83xx_MDIO }, }, { /* default match */ diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c index 03b1fc9b950..af4deace49e 100644 --- a/arch/ppc/syslib/prom.c +++ b/arch/ppc/syslib/prom.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/ioport.h> diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 7f15136830f..df14422ae1c 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/ioport.h> diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 29552348e58..9d10c12e87f 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -279,17 +279,12 @@ config ARCH_FLATMEM_ENABLE def_bool y depends on !NUMA -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - depends on SMP && PPC_PSERIES - -config ARCH_DISCONTIGMEM_DEFAULT +config ARCH_SPARSEMEM_ENABLE def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE -config ARCH_SPARSEMEM_ENABLE +config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE + depends on NUMA source "mm/Kconfig" @@ -297,6 +292,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NEED_MULTIPLE_NODES +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + # Some NUMA nodes have memory ranges that span # other nodes. Even though a pfn is valid and # between a node's start and end pfns, it may not diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/ppc64/boot/addRamDisk.c index 7f2c0947339..c02a99952be 100644 --- a/arch/ppc64/boot/addRamDisk.c +++ b/arch/ppc64/boot/addRamDisk.c @@ -5,11 +5,59 @@ #include <sys/types.h> #include <sys/stat.h> #include <string.h> +#include <elf.h> #define ElfHeaderSize (64 * 1024) #define ElfPages (ElfHeaderSize / 4096) #define KERNELBASE (0xc000000000000000) +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +struct addr_range { + unsigned long long addr; + unsigned long memsize; + unsigned long offset; +}; + +static int check_elf64(void *p, int size, struct addr_range *r) +{ + Elf64_Ehdr *elf64 = p; + Elf64_Phdr *elf64ph; + + if (elf64->e_ident[EI_MAG0] != ELFMAG0 || + elf64->e_ident[EI_MAG1] != ELFMAG1 || + elf64->e_ident[EI_MAG2] != ELFMAG2 || + elf64->e_ident[EI_MAG3] != ELFMAG3 || + elf64->e_ident[EI_CLASS] != ELFCLASS64 || + elf64->e_ident[EI_DATA] != ELFDATA2MSB || + elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64) + return 0; + + if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size) + return 0; + + elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + + r->memsize = (unsigned long)elf64ph->p_memsz; + r->offset = (unsigned long)elf64ph->p_offset; + r->addr = (unsigned long long)elf64ph->p_vaddr; + +#ifdef DEBUG + printf("PPC64 ELF file, ph:\n"); + printf("p_type 0x%08x\n", elf64ph->p_type); + printf("p_flags 0x%08x\n", elf64ph->p_flags); + printf("p_offset 0x%016llx\n", elf64ph->p_offset); + printf("p_vaddr 0x%016llx\n", elf64ph->p_vaddr); + printf("p_paddr 0x%016llx\n", elf64ph->p_paddr); + printf("p_filesz 0x%016llx\n", elf64ph->p_filesz); + printf("p_memsz 0x%016llx\n", elf64ph->p_memsz); + printf("p_align 0x%016llx\n", elf64ph->p_align); + printf("... skipping 0x%08lx bytes of ELF header\n", + (unsigned long)elf64ph->p_offset); +#endif + + return 64; +} void get4k(FILE *file, char *buf ) { unsigned j; @@ -34,97 +82,92 @@ void death(const char *msg, FILE *fdesc, const char *fname) int main(int argc, char **argv) { char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *sysmap = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - - unsigned long sysmapFileLen = 0; - unsigned long sysmapLen = 0; - unsigned long sysmapPages = 0; - char* ptr_end = NULL; - unsigned long offset_end = 0; - - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - unsigned long hvReleaseData = 0; + struct addr_range vmlinux; + FILE *ramDisk; + FILE *inputVmlinux; + FILE *outputVmlinux; + + char *rd_name, *lx_name, *out_name; + + size_t i; + unsigned long ramFileLen; + unsigned long ramLen; + unsigned long roundR; + unsigned long offset_end; + + unsigned long kernelLen; + unsigned long actualKernelLen; + unsigned long round; + unsigned long roundedKernelLen; + unsigned long ramStartOffs; + unsigned long ramPages; + unsigned long roundedKernelPages; + unsigned long hvReleaseData; u_int32_t eyeCatcher = 0xc8a5d9c4; - unsigned long naca = 0; - unsigned long xRamDisk = 0; - unsigned long xRamDiskSize = 0; - long padPages = 0; + unsigned long naca; + unsigned long xRamDisk; + unsigned long xRamDiskSize; + long padPages; if (argc < 2) { fprintf(stderr, "Name of RAM disk file missing.\n"); exit(1); } + rd_name = argv[1]; if (argc < 3) { - fprintf(stderr, "Name of System Map input file is missing.\n"); - exit(1); - } - - if (argc < 4) { fprintf(stderr, "Name of vmlinux file missing.\n"); exit(1); } + lx_name = argv[2]; - if (argc < 5) { + if (argc < 4) { fprintf(stderr, "Name of vmlinux output file missing.\n"); exit(1); } + out_name = argv[3]; - ramDisk = fopen(argv[1], "r"); + ramDisk = fopen(rd_name, "r"); if ( ! ramDisk ) { - fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", argv[1]); + fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name); exit(1); } - sysmap = fopen(argv[2], "r"); - if ( ! sysmap ) { - fprintf(stderr, "System Map file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - - inputVmlinux = fopen(argv[3], "r"); + inputVmlinux = fopen(lx_name, "r"); if ( ! inputVmlinux ) { - fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", argv[3]); + fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name); exit(1); } - outputVmlinux = fopen(argv[4], "w+"); + outputVmlinux = fopen(out_name, "w+"); if ( ! outputVmlinux ) { - fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", argv[4]); + fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name); exit(1); } - - - + + i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux); + if (i != sizeof(inbuf)) { + fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i); + exit(1); + } + + i = check_elf64(inbuf, sizeof(inbuf), &vmlinux); + if (i == 0) { + fprintf(stderr, "You must have a linux kernel specified as argv[2]\n"); + exit(1); + } + /* Input Vmlinux file */ fseek(inputVmlinux, 0, SEEK_END); kernelLen = ftell(inputVmlinux); fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %d\n", kernelLen); - if ( kernelLen == 0 ) { - fprintf(stderr, "You must have a linux kernel specified as argv[3]\n"); - exit(1); - } + printf("kernel file size = %lu\n", kernelLen); actualKernelLen = kernelLen - ElfHeaderSize; - printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen); + printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen); round = actualKernelLen % 4096; roundedKernelLen = actualKernelLen; @@ -134,39 +177,7 @@ int main(int argc, char **argv) roundedKernelPages = roundedKernelLen / 4096; printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages); - - - /* Input System Map file */ - /* (needs to be processed simply to determine if we need to add pad pages due to the static variables not being included in the vmlinux) */ - fseek(sysmap, 0, SEEK_END); - sysmapFileLen = ftell(sysmap); - fseek(sysmap, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[2], sysmapFileLen, sysmapFileLen); - - sysmapLen = sysmapFileLen; - - roundR = 4096 - (sysmapLen % 4096); - if (roundR) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); - sysmapLen += roundR; - } - printf("Rounded System Map size is %ld/0x%lx \n", sysmapLen, sysmapLen); - - /* Process the Sysmap file to determine where _end is */ - sysmapPages = sysmapLen / 4096; - /* read the whole file line by line, expect that it doesn't fail */ - while ( fgets(inbuf, 4096, sysmap) ) ; - /* search for _end in the last page of the system map */ - ptr_end = strstr(inbuf, " _end"); - if (!ptr_end) { - fprintf(stderr, "Unable to find _end in the sysmap file \n"); - fprintf(stderr, "inbuf: \n"); - fprintf(stderr, "%s \n", inbuf); - exit(1); - } - printf("Found _end in the last page of the sysmap - backing up 10 characters it looks like %s", ptr_end-10); - /* convert address of _end in system map to hex offset. */ - offset_end = (unsigned int)strtol(ptr_end-10, NULL, 16); + offset_end = _ALIGN_UP(vmlinux.memsize, 4096); /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */ padPages = offset_end/4096 - roundedKernelPages; @@ -194,7 +205,7 @@ int main(int argc, char **argv) fseek(ramDisk, 0, SEEK_END); ramFileLen = ftell(ramDisk); fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[1], ramFileLen, ramFileLen); + printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen); ramLen = ramFileLen; @@ -248,19 +259,19 @@ int main(int argc, char **argv) /* fseek to the hvReleaseData pointer */ fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET); if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name); } hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */ - printf("hvReleaseData is at %08x\n", hvReleaseData); + printf("hvReleaseData is at %08lx\n", hvReleaseData); /* fseek to the hvReleaseData */ fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET); if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData\n", outputVmlinux, out_name); } /* Check hvReleaseData sanity */ if (memcmp(inbuf, &eyeCatcher, 4) != 0) { - death("hvReleaseData is invalid\n", outputVmlinux, argv[4]); + death("hvReleaseData is invalid\n", outputVmlinux, out_name); } /* Get the naca pointer */ naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE; @@ -269,13 +280,13 @@ int main(int argc, char **argv) /* fseek to the naca */ fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not read naca\n", outputVmlinux, argv[4]); + death("Could not read naca\n", outputVmlinux, out_name); } xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c])); xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14])); /* Make sure a RAM disk isn't already present */ if ((xRamDisk != 0) || (xRamDiskSize != 0)) { - death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[4]); + death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name); } /* Fill in the values */ *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs); @@ -285,15 +296,15 @@ int main(int argc, char **argv) fflush(outputVmlinux); fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not write naca\n", outputVmlinux, argv[4]); + death("Could not write naca\n", outputVmlinux, out_name); } - printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08x\n", + printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n", ramPages, ramStartOffs); /* Done */ fclose(outputVmlinux); /* Set permission to executable */ - chmod(argv[4], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); + chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); return 0; } diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index c441aebe764..dac4cc20fa9 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -11,13 +11,10 @@ obj-y := misc.o prom.o endif -obj-y += irq.o idle.o dma.o \ - align.o pacaData.o \ - udbg.o ioctl32.o \ +obj-y += idle.o dma.o \ + align.o \ rtc.o \ - cpu_setup_power4.o \ - iommu.o sysfs.o vdso.o firmware.o -obj-y += vdso32/ vdso64/ + iommu.o pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o @@ -28,32 +25,19 @@ ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o endif -obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o - obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_EEH) += eeh.o -obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_MODULES) += ppc_ksyms.o endif -obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_BOOTX_TEXT) += btext.o endif obj-$(CONFIG_HVCS) += hvcserver.o -obj-$(CONFIG_PPC_PMAC) += udbg_scc.o - -obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o - obj-$(CONFIG_KPROBES) += kprobes.o -CFLAGS_ioctl32.o += -Ifs/ - ifneq ($(CONFIG_PPC_MERGE),y) ifeq ($(CONFIG_PPC_ISERIES),y) arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index bce9065da6c..84ab5c18ef5 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -74,7 +74,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 9e8050ea122..1c869ea72d2 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -28,7 +28,6 @@ #include <asm/processor.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/systemcfg.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/bug.h> @@ -1701,21 +1700,9 @@ _GLOBAL(__secondary_start) HMT_MEDIUM /* Set thread priority to MEDIUM */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize + + /* Do early setup for that CPU */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1724,37 +1711,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif li r7,0 mtlr r7 @@ -1896,40 +1852,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - sub r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 8fec2746980..b879d3057ef 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -26,7 +26,6 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/systemcfg.h> #include <asm/machdep.h> #include <asm/smp.h> @@ -34,15 +33,11 @@ extern void power4_idle(void); void default_idle(void) { - long oldval; unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched() && !cpu_is_offline(cpu)) { ppc64_runlatch_off(); @@ -55,13 +50,12 @@ void default_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); } @@ -77,7 +71,9 @@ void native_idle(void) if (need_resched()) { ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } if (cpu_is_offline(smp_processor_id()) && diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 914632ec587..5e089deb0a2 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -78,12 +78,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -186,7 +186,8 @@ _KPROBE(__flush_icache_range) bdnz 2b isync blr - .previous .text + + .text /* * Like above, but only do the D-cache. * diff --git a/arch/ppc64/kernel/nvram.c b/arch/ppc64/kernel/nvram.c index 4fb1a9f5060..c0fcd29918c 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/ppc64/kernel/nvram.c @@ -31,7 +31,6 @@ #include <asm/rtas.h> #include <asm/prom.h> #include <asm/machdep.h> -#include <asm/systemcfg.h> #undef DEBUG_NVRAM @@ -167,7 +166,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, case IOC_NVRAM_GET_OFFSET: { int part, offset; - if (systemcfg->platform != PLATFORM_POWERMAC) + if (_machine != PLATFORM_POWERMAC) return -EINVAL; if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) return -EFAULT; @@ -450,7 +449,7 @@ static int nvram_setup_partition(void) * in our nvram, as Apple defined partitions use pretty much * all of the space */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENOSPC; /* see if we have an OS partition that meets our needs. diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 30247ff7497..3cef1b8f57f 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -548,6 +548,11 @@ static int __init pcibios_init(void) if (ppc64_isabridge_dev != NULL) printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); +#ifdef CONFIG_PPC_MULTIPLATFORM + /* map in PCI I/O space */ + phbs_remap_io(); +#endif + printk("PCI: Probing PCI hardware done\n"); return 0; @@ -1277,12 +1282,9 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, * G5 machines... So when something asks for bus 0 io base * (bus 0 is HT root), we return the AGP one instead. */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) + if (machine_is_compatible("MacRISC4")) if (in_bus == 0) in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ /* That syscall isn't quite compatible with PCI domains, but it's * used on pre-domains setup. We return the first match diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index 1a443a7ada4..12c4c9e9bbc 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -43,7 +43,7 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) u32 *regs; struct pci_dn *pdn; - if (phb->is_dynamic) + if (mem_init_done) pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); else pdn = alloc_bootmem(sizeof(*pdn)); @@ -120,6 +120,14 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, return NULL; } +/** + * pci_devs_phb_init_dynamic - setup pci devices under this PHB + * phb: pci-to-host bridge (top-level bridge connecting to cpu) + * + * This routine is called both during boot, (before the memory + * subsystem is set up, before kmalloc is valid) and during the + * dynamic lpar operation of adding a PHB to a running system. + */ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) { struct device_node * dn = (struct device_node *) phb->arch_data; @@ -201,9 +209,14 @@ static struct notifier_block pci_dn_reconfig_nb = { .notifier_call = pci_dn_reconfig_notifier, }; -/* - * Actually initialize the phbs. - * The buswalk on this phb has not happened yet. +/** + * pci_devs_phb_init - Initialize phbs and pci devs under them. + * + * This routine walks over all phb's (pci-host bridges) on the + * system, and sets up assorted pci-related structures + * (including pci info in the device node structs) for each + * pci device found underneath. This routine runs once, + * early in the boot sequence. */ void __init pci_devs_phb_init(void) { diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index 3402fbee62c..fbad2c36078 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -318,7 +318,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, } /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -1065,7 +1065,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node, prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; - systemcfg->platform = *prop; + _machine = *prop; /* check if iommu is forced on or off */ if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) @@ -1230,11 +1230,8 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); - systemcfg->physicalMemorySize = lmb_phys_mem_size(); lmb_reserve(0, __pa(klimit)); - DBG("Phys. mem: %lx\n", systemcfg->physicalMemorySize); - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ early_reserve_mem(); @@ -1753,7 +1750,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index e4c880dab99..6375f40b23d 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1934,7 +1934,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); /* diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c index 4aacf521e3e..1bbacac4498 100644 --- a/arch/ppc64/kernel/vdso.c +++ b/arch/ppc64/kernel/vdso.c @@ -34,6 +34,7 @@ #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/sections.h> +#include <asm/systemcfg.h> #include <asm/vdso.h> #undef DEBUG @@ -179,7 +180,7 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, * Last page is systemcfg. */ if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(systemcfg); + pg = virt_to_page(_systemcfg); else pg = virt_to_page(vbase + offset); @@ -604,7 +605,7 @@ void __init vdso_init(void) get_page(pg); } - get_page(virt_to_page(systemcfg)); + get_page(virt_to_page(_systemcfg)); } int in_gate_area_no_task(unsigned long addr) diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S deleted file mode 100644 index e243c1d24af..00000000000 --- a/arch/ppc64/kernel/vdso32/gettimeofday.S +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Userland implementation of gettimeofday() for 32 bits processes in a - * ppc64 kernel for use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> - - .text -/* - * Exact prototype of gettimeofday - * - * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); - * - */ -V_FUNCTION_BEGIN(__kernel_gettimeofday) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r10,r3 /* r10 saves tv */ - mr r11,r4 /* r11 saves tz */ - bl __get_datapage@local /* get data page */ - mr r9, r3 /* datapage ptr in r9 */ - bl __do_get_xsec@local /* get xsec from tb & kernel */ - bne- 2f /* out of line -> do syscall */ - - /* seconds are xsec >> 20 */ - rlwinm r5,r4,12,20,31 - rlwimi r5,r3,12,0,19 - stw r5,TVAL32_TV_SEC(r10) - - /* get remaining xsec and convert to usec. we scale - * up remaining xsec by 12 bits and get the top 32 bits - * of the multiplication - */ - rlwinm r5,r4,12,0,19 - lis r6,1000000@h - ori r6,r6,1000000@l - mulhwu r5,r5,r6 - stw r5,TVAL32_TV_USEC(r10) - - cmpli cr0,r11,0 /* check if tz is NULL */ - beq 1f - lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */ - lwz r5,CFG_TZ_DSTTIME(r9) - stw r4,TZONE_TZ_MINWEST(r11) - stw r5,TZONE_TZ_DSTTIME(r11) - -1: mtlr r12 - li r3,0 - blr - -2: mr r3,r10 - mr r4,r11 - li r0,__NR_gettimeofday - sc - b 1b - .cfi_endproc -V_FUNCTION_END(__kernel_gettimeofday) - -/* - * This is the core of gettimeofday(), it returns the xsec - * value in r3 & r4 and expects the datapage ptr (non clobbered) - * in r9. clobbers r0,r4,r5,r6,r7,r8 -*/ -__do_get_xsec: - .cfi_startproc - /* Check for update count & load values. We use the low - * order 32 bits of the update count - */ -1: lwz r8,(CFG_TB_UPDATE_COUNT+4)(r9) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r9,r9,r0 - - /* Load orig stamp (offset to TB) */ - lwz r5,CFG_TB_ORIG_STAMP(r9) - lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) - - /* Get a stable TB value */ -2: mftbu r3 - mftbl r4 - mftbu r0 - cmpl cr0,r3,r0 - bne- 2b - - /* Substract tb orig stamp. If the high part is non-zero, we jump to the - * slow path which call the syscall. If it's ok, then we have our 32 bits - * tb_ticks value in r7 - */ - subfc r7,r6,r4 - subfe. r0,r5,r3 - bne- 3f - - /* Load scale factor & do multiplication */ - lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r4,r7,r5 - mulhwu r6,r7,r6 - mullw r0,r7,r5 - addc r6,r6,r0 - - /* At this point, we have the scaled xsec value in r4 + XER:CA - * we load & add the stamp since epoch - */ - lwz r5,CFG_STAMP_XSEC(r9) - lwz r6,(CFG_STAMP_XSEC+4)(r9) - adde r4,r4,r6 - addze r3,r5 - - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter - */ - xor r0,r4,r4 - add r9,r9,r0 - lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) - cmpl cr0,r8,r0 /* check if updated */ - bne- 1b - - /* Warning ! The caller expects CR:EQ to be set to indicate a - * successful calculation (so it won't fallback to the syscall - * method). We have overriden that CR bit in the counter check, - * but fortunately, the loop exit condition _is_ CR:EQ set, so - * we can exit safely here. If you change this code, be careful - * of that side effect. - */ -3: blr - .cfi_endproc diff --git a/arch/ppc64/kernel/vdso64/gettimeofday.S b/arch/ppc64/kernel/vdso64/gettimeofday.S deleted file mode 100644 index f6df8028570..00000000000 --- a/arch/ppc64/kernel/vdso64/gettimeofday.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Userland implementation of gettimeofday() for 64 bits processes in a - * ppc64 kernel for use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> - - .text -/* - * Exact prototype of gettimeofday - * - * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); - * - */ -V_FUNCTION_BEGIN(__kernel_gettimeofday) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r11,r3 /* r11 holds tv */ - mr r10,r4 /* r10 holds tz */ - bl V_LOCAL_FUNC(__get_datapage) /* get data page */ - bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ - ori r7,r7,16960 - rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ - rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ - std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ - subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / XSEC_PER_SEC */ - rldicl r0,r0,44,20 - cmpldi cr0,r10,0 /* check if tz is NULL */ - std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ - beq 1f - lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ - lwz r5,CFG_TZ_DSTTIME(r3) - stw r4,TZONE_TZ_MINWEST(r10) - stw r5,TZONE_TZ_DSTTIME(r10) -1: mtlr r12 - li r3,0 /* always success */ - blr - .cfi_endproc -V_FUNCTION_END(__kernel_gettimeofday) - - -/* - * This is the core of gettimeofday(), it returns the xsec - * value in r4 and expects the datapage ptr (non clobbered) - * in r3. clobbers r0,r4,r5,r6,r7,r8 -*/ -V_FUNCTION_BEGIN(__do_get_xsec) - .cfi_startproc - /* check for update count & load values */ -1: ld r7,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r4,1 /* pending update ? loop */ - bne- 1b - xor r0,r4,r4 /* create dependency */ - add r3,r3,r0 - - /* Get TB & offset it */ - mftb r8 - ld r9,CFG_TB_ORIG_STAMP(r3) - subf r8,r9,r8 - - /* Scale result */ - ld r5,CFG_TB_TO_XS(r3) - mulhdu r8,r8,r5 - - /* Add stamp since epoch */ - ld r6,CFG_STAMP_XSEC(r3) - add r4,r6,r8 - - xor r0,r4,r4 - add r3,r3,r0 - ld r0,CFG_TB_UPDATE_COUNT(r3) - cmpld cr0,r0,r7 /* check if updated */ - bne- 1b - blr - .cfi_endproc -V_FUNCTION_END(__do_get_xsec) diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c9f2f60cfa5..dee6ab54984 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -592,12 +592,15 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { + void *table; spin_lock(&appldata_ops_lock); - unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); - kfree(ops->ctl_table); + /* at that point any incoming access will fail */ + table = ops->ctl_table; ops->ctl_table = NULL; spin_unlock(&appldata_ops_lock); + unregister_sysctl_table(ops->sysctl_header); + kfree(table); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management <END> **************************/ diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index bc59282da76..896d39d0e4c 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -486,7 +486,7 @@ out: * - goto next entry in p_info */ -extern inline int +static inline int debug_next_entry(file_private_info_t *p_info) { debug_info_t *id; @@ -800,7 +800,7 @@ debug_set_level(debug_info_t* id, int new_level) * - set active entry to next in the ring buffer */ -extern inline void +static inline void proceed_active_entry(debug_info_t * id) { if ((id->active_entries[id->active_area] += id->entry_size) @@ -817,7 +817,7 @@ proceed_active_entry(debug_info_t * id) * - set active area to next in the ring buffer */ -extern inline void +static inline void proceed_active_area(debug_info_t * id) { id->active_area++; @@ -828,7 +828,7 @@ proceed_active_area(debug_info_t * id) * get_active_entry: */ -extern inline debug_entry_t* +static inline debug_entry_t* get_active_entry(debug_info_t * id) { return (debug_entry_t *) (((char *) id->areas[id->active_area] @@ -841,7 +841,7 @@ get_active_entry(debug_info_t * id) * - set timestamp, caller address, cpu number etc. */ -extern inline void +static inline void debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, int exception) { @@ -971,7 +971,7 @@ debug_entry_t * counts arguments in format string for sprintf view */ -extern inline int +static inline int debug_count_numargs(char *string) { int numargs=0; diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 9f3dff6c0b7..78b64fe5e7c 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -99,15 +99,15 @@ void default_idle(void) { int cpu, rc; + /* CPU is going idle. */ + cpu = smp_processor_id(); + local_irq_disable(); - if (need_resched()) { + if (need_resched()) { local_irq_enable(); - schedule(); - return; - } + return; + } - /* CPU is going idle. */ - cpu = smp_processor_id(); rc = notifier_call_chain(&idle_chain, CPU_IDLE, (void *)(long) cpu); if (rc != NOTIFY_OK && rc != NOTIFY_DONE) BUG(); @@ -120,7 +120,7 @@ void default_idle(void) __ctl_set_bit(8, 15); #ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) + if (cpu_is_offline(cpu)) cpu_die(); #endif @@ -139,8 +139,14 @@ void default_idle(void) void cpu_idle(void) { - for (;;) - default_idle(); + for (;;) { + while (!need_resched()) + default_idle(); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void show_regs(struct pt_regs *regs) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index e13c87b446b..5856b3fda6b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -533,6 +533,7 @@ int __devinit start_secondary(void *cpuvoid) { /* Setup the cpu */ cpu_init(); + preempt_disable(); /* init per CPU timer */ init_cpu_timer(); #ifdef CONFIG_VIRT_TIMER diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 64e32da7775..fb2607c369e 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -160,7 +160,7 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code, * 11 Page translation -> Not present (nullification) * 3b Region third trans. -> Not present (nullification) */ -extern inline void +static inline void do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) { struct task_struct *tsk; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 6dce9d0b81f..fd4f240b833 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -51,28 +51,24 @@ void enable_hlt(void) EXPORT_SYMBOL(enable_hlt); -void default_idle(void) +void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { if (hlt_counter) { - while (1) - if (need_resched()) - break; + while (!need_resched()) + cpu_relax(); } else { while (!need_resched()) cpu_sleep(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } -void cpu_idle(void) -{ - default_idle(); -} - void machine_restart(char * __unused) { /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */ diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 5ecefc02896..59e49b18252 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -112,7 +112,9 @@ int __cpu_up(unsigned int cpu) int start_secondary(void *unused) { - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + cpu = smp_processor_id(); atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; @@ -120,6 +122,7 @@ int start_secondary(void *unused) smp_store_cpu_info(cpu); __smp_slave_init(cpu); + preempt_disable(); per_cpu_trap_init(); atomic_inc(&cpus_booted); diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c index efde41c0cd6..b95d0414185 100644 --- a/arch/sh64/kernel/process.c +++ b/arch/sh64/kernel/process.c @@ -307,23 +307,19 @@ __setup("hlt", hlt_setup); static inline void hlt(void) { - if (hlt_counter) - return; - __asm__ __volatile__ ("sleep" : : : "memory"); } /* * The idle loop on a uniprocessor SH.. */ -void default_idle(void) +void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { if (hlt_counter) { - while (1) - if (need_resched()) - break; + while (!need_resched()) + cpu_relax(); } else { local_irq_disable(); while (!need_resched()) { @@ -334,13 +330,11 @@ void default_idle(void) } local_irq_enable(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } -} -void cpu_idle(void) -{ - default_idle(); } void machine_restart(char * __unused) diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index 6a4ebc62193..d7bfc61d287 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -75,7 +75,7 @@ struct cpu_fp_info linux_sparc_fpu[] = { { 9, 3, "Fujitsu or Weitek on-chip FPU"}, }; -#define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) +#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu) struct cpu_iu_info linux_sparc_chips[] = { /* Sun4/100, 4/200, SLC */ @@ -120,7 +120,7 @@ struct cpu_iu_info linux_sparc_chips[] = { { 0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"}, }; -#define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) +#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips) char *sparc_cpu_type; char *sparc_fpu_type; diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 25e31d5ec99..cccfc12802e 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -143,7 +143,7 @@ static struct pcic_ca2irq pcic_i_jk[] = { * as several PROMs may be installed on the same physical board. */ #define SN2L_INIT(name, map) \ - { name, map, sizeof(map)/sizeof(struct pcic_ca2irq) } + { name, map, ARRAY_SIZE(map) } static struct pcic_sn2list pcic_known_sysnames[] = { SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */ diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 29e72b57d4f..ea864741146 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -67,13 +67,6 @@ extern void fpsave(unsigned long *, unsigned long *, void *, unsigned long *); struct task_struct *last_task_used_math = NULL; struct thread_info *current_set[NR_CPUS]; -/* - * default_idle is new in 2.5. XXX Review, currently stolen from sparc64. - */ -void default_idle(void) -{ -} - #ifndef CONFIG_SMP #define SUN4C_FAULT_HIGH 100 @@ -92,12 +85,11 @@ void cpu_idle(void) static unsigned long fps; unsigned long now; unsigned long faults; - unsigned long flags; extern unsigned long sun4c_kernel_faults; extern void sun4c_grow_kernel_ring(void); - local_irq_save(flags); + local_irq_disable(); now = jiffies; count -= (now - last_jiffies); last_jiffies = now; @@ -113,14 +105,19 @@ void cpu_idle(void) sun4c_grow_kernel_ring(); } } - local_irq_restore(flags); + local_irq_enable(); } - while((!need_resched()) && pm_idle) { - (*pm_idle)(); + if (pm_idle) { + while (!need_resched()) + (*pm_idle)(); + } else { + while (!need_resched()) + cpu_relax(); } - + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } @@ -130,13 +127,15 @@ void cpu_idle(void) /* This is being executed in task 0 'user space'. */ void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while(1) { - if(need_resched()) { - schedule(); - check_pgt_cache(); - } - barrier(); /* or else gcc optimizes... */ + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + check_pgt_cache(); } } diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c index 2bbd53f3caf..9eeed3347df 100644 --- a/arch/sparc/mm/fault.c +++ b/arch/sparc/mm/fault.c @@ -33,8 +33,6 @@ #include <asm/kdebug.h> #include <asm/uaccess.h> -#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0])) - extern int prom_node_root; /* At boot time we determine these two values necessary for setting diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c index 77ef5df4e5a..00eed88ef2e 100644 --- a/arch/sparc64/kernel/cpu.c +++ b/arch/sparc64/kernel/cpu.c @@ -43,7 +43,7 @@ struct cpu_fp_info linux_sparc_fpu[] = { { 0x3e, 0x22, 0, "UltraSparc IIIi+ integrated FPU"}, }; -#define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) +#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu) struct cpu_iu_info linux_sparc_chips[] = { { 0x17, 0x10, "TI UltraSparc I (SpitFire)"}, @@ -59,7 +59,7 @@ struct cpu_iu_info linux_sparc_chips[] = { { 0x3e, 0x22, "TI UltraSparc IIIi+ (Serrano)"}, }; -#define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) +#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips) char *sparc_cpu_type = "cpu-oops"; char *sparc_fpu_type = "fpu-oops"; diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c index 92e26304de9..e62214354bb 100644 --- a/arch/sparc64/kernel/ioctl32.c +++ b/arch/sparc64/kernel/ioctl32.c @@ -92,10 +92,8 @@ static int fbiogscursor(unsigned int fd, unsigned int cmd, unsigned long arg) return sys_ioctl (fd, FBIOSCURSOR, (unsigned long)p); } -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ @@ -116,8 +114,6 @@ COMPATIBLE_IOCTL(FBIOGCURPOS) COMPATIBLE_IOCTL(FBIOGCURMAX) /* Little k */ /* Little v, the video4linux ioctls */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ /* And these ioctls need translation */ /* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */ HANDLE_IOCTL(FBIOPUTCMAP32, fbiogetputcmap) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 7d10b039709..02f9dec1d45 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -74,7 +74,9 @@ void cpu_idle(void) while (!need_resched()) barrier(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } @@ -83,21 +85,31 @@ void cpu_idle(void) /* * the idle loop on a UltraMultiPenguin... + * + * TIF_POLLING_NRFLAG is set because we do not sleep the cpu + * inside of the idler task, so an interrupt is not needed + * to get a clean fast response. + * + * XXX Reverify this assumption... -DaveM + * + * Addendum: We do want it to do something for the signal + * delivery case, we detect that by just seeing + * if we are trying to send this to an idler or not. */ -#define idle_me_harder() (cpu_data(smp_processor_id()).idle_volume += 1) -#define unidle_me() (cpu_data(smp_processor_id()).idle_volume = 0) void cpu_idle(void) { + cpuinfo_sparc *cpuinfo = &local_cpu_data(); set_thread_flag(TIF_POLLING_NRFLAG); + while(1) { if (need_resched()) { - unidle_me(); - clear_thread_flag(TIF_POLLING_NRFLAG); + cpuinfo->idle_volume = 0; + preempt_enable_no_resched(); schedule(); - set_thread_flag(TIF_POLLING_NRFLAG); + preempt_disable(); check_pgt_cache(); } - idle_me_harder(); + cpuinfo->idle_volume++; /* The store ordering is so that IRQ handlers on * other cpus see our increasing idleness for the buddy diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index e09ddf92765..96b82505566 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -790,7 +790,7 @@ static unsigned long sysio_irq_offsets[] = { #undef bogon -#define NUM_SYSIO_OFFSETS (sizeof(sysio_irq_offsets) / sizeof(sysio_irq_offsets[0])) +#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) /* Convert Interrupt Mapping register pointer to associated * Interrupt Clear register pointer, SYSIO specific version. diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index bf1849dd9c4..48180531562 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -587,6 +587,8 @@ extern void mmu_info(struct seq_file *); unsigned int dcache_parity_tl1_occurred; unsigned int icache_parity_tl1_occurred; +static int ncpus_probed; + static int show_cpuinfo(struct seq_file *m, void *__unused) { seq_printf(m, @@ -595,8 +597,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) "promlib\t\t: Version 3 Revision %d\n" "prom\t\t: %d.%d.%d\n" "type\t\t: sun4u\n" - "ncpus probed\t: %ld\n" - "ncpus active\t: %ld\n" + "ncpus probed\t: %d\n" + "ncpus active\t: %d\n" "D$ parity tl1\t: %u\n" "I$ parity tl1\t: %u\n" #ifndef CONFIG_SMP @@ -610,8 +612,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) prom_prev >> 16, (prom_prev >> 8) & 0xff, prom_prev & 0xff, - (long)num_possible_cpus(), - (long)num_online_cpus(), + ncpus_probed, + num_online_cpus(), dcache_parity_tl1_occurred, icache_parity_tl1_occurred #ifndef CONFIG_SMP @@ -677,6 +679,15 @@ static int __init topology_init(void) int i, err; err = -ENOMEM; + + /* Count the number of physically present processors in + * the machine, even on uniprocessor, so that /proc/cpuinfo + * output is consistent with 2.4.x + */ + ncpus_probed = 0; + while (!cpu_find_by_instance(ncpus_probed, NULL, NULL)) + ncpus_probed++; + for (i = 0; i < NR_CPUS; i++) { if (cpu_possible(i)) { struct cpu *p = kmalloc(sizeof(*p), GFP_KERNEL); diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 5d90ee9aebf..6efc03df51c 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -39,7 +39,6 @@ #include <asm/starfire.h> #include <asm/tlb.h> -extern int linux_num_cpus; extern void calibrate_delay(void); /* Please don't make this stuff initdata!!! --DaveM */ @@ -168,6 +167,9 @@ void __init smp_callin(void) rmb(); cpu_set(cpuid, cpu_online_map); + + /* idle thread is expected to have preempt disabled */ + preempt_disable(); } void cpu_panic(void) @@ -1149,20 +1151,9 @@ void __init smp_cpus_done(unsigned int max_cpus) (bogosum/(5000/HZ))%100); } -/* This needn't do anything as we do not sleep the cpu - * inside of the idler task, so an interrupt is not needed - * to get a clean fast response. - * - * XXX Reverify this assumption... -DaveM - * - * Addendum: We do want it to do something for the signal - * delivery case, we detect that by just seeing - * if we are trying to send this to an idler or not. - */ void smp_send_reschedule(int cpu) { - if (cpu_data(cpu).idle_volume == 0) - smp_receive_signal(cpu); + smp_receive_signal(cpu); } /* This is a nop because we capture all other cpus diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 31fbc67719a..6f0539aa44d 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -30,8 +30,6 @@ #include <asm/sections.h> #include <asm/kdebug.h> -#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0])) - /* * To debug kernel to catch accesses to certain virtual/physical addresses. * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints. @@ -109,7 +107,7 @@ static void bad_kernel_pc(struct pt_regs *regs) * this. Additionally, to prevent kswapd from ripping ptes from * under us, raise interrupts around the time that we look at the * pte, kswapd will have to wait to get his smp ipi response from - * us. This saves us having to get page_table_lock. + * us. vmtruncate likewise. This saves us having to get pte lock. */ static unsigned int get_user_insn(unsigned long tpc) { diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index fe865d9a372..84c73a300ac 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -243,34 +243,18 @@ static int uml_net_change_mtu(struct net_device *dev, int new_mtu) return err; } -static int uml_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - static const struct ethtool_drvinfo info = { - .cmd = ETHTOOL_GDRVINFO, - .driver = DRIVER_NAME, - .version = "42", - }; - void *useraddr; - u32 ethcmd; - - switch (cmd) { - case SIOCETHTOOL: - useraddr = ifr->ifr_data; - if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) - return -EFAULT; - switch (ethcmd) { - case ETHTOOL_GDRVINFO: - if (copy_to_user(useraddr, &info, sizeof(info))) - return -EFAULT; - return 0; - default: - return -EOPNOTSUPP; - } - default: - return -EINVAL; - } +static void uml_net_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRIVER_NAME); + strcpy(info->version, "42"); } +static struct ethtool_ops uml_net_ethtool_ops = { + .get_drvinfo = uml_net_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + void uml_net_user_timer_expire(unsigned long _conn) { #ifdef undef @@ -284,9 +268,10 @@ void uml_net_user_timer_expire(unsigned long _conn) static DEFINE_SPINLOCK(devices_lock); static struct list_head devices = LIST_HEAD_INIT(devices); -static struct device_driver uml_net_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver uml_net_driver = { + .driver = { + .name = DRIVER_NAME, + }, }; static int driver_registered; @@ -333,7 +318,7 @@ static int eth_configure(int n, void *init, char *mac, /* sysfs register */ if (!driver_registered) { - driver_register(¨_net_driver); + platform_driver_register(¨_net_driver); driver_registered = 1; } device->pdev.id = n; @@ -359,7 +344,7 @@ static int eth_configure(int n, void *init, char *mac, dev->tx_timeout = uml_net_tx_timeout; dev->set_mac_address = uml_net_set_mac; dev->change_mtu = uml_net_change_mtu; - dev->do_ioctl = uml_net_ioctl; + dev->ethtool_ops = ¨_net_ethtool_ops; dev->watchdog_timeo = (HZ >> 1); dev->irq = UM_ETH_IRQ; diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index b2c86257b0f..93898917cbe 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -823,9 +823,10 @@ static int ubd_mc_init(void) __initcall(ubd_mc_init); -static struct device_driver ubd_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver ubd_driver = { + .driver = { + .name = DRIVER_NAME, + }, }; int ubd_init(void) @@ -850,7 +851,7 @@ int ubd_init(void) if (register_blkdev(fake_major, "ubd")) return -1; } - driver_register(&ubd_driver); + platform_driver_register(&ubd_driver); for (i = 0; i < MAX_DEV; i++) ubd_add(i); return 0; diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c index 9c708c32c1f..39cf247cdae 100644 --- a/arch/v850/kernel/process.c +++ b/arch/v850/kernel/process.c @@ -36,11 +36,8 @@ extern void ret_from_fork (void); /* The idle loop. */ void default_idle (void) { - while (1) { - while (! need_resched ()) - asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); - schedule (); - } + while (! need_resched ()) + asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); } void (*idle)(void) = default_idle; @@ -54,7 +51,14 @@ void (*idle)(void) = default_idle; void cpu_idle (void) { /* endless idle loop with no priority at all */ - (*idle) (); + while (1) { + while (!need_resched()) + (*idle) (); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } /* diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c index 4ba0e293d5e..e335bd0b637 100644 --- a/arch/x86_64/ia32/ia32_ioctl.c +++ b/arch/x86_64/ia32/ia32_ioctl.c @@ -64,12 +64,6 @@ struct ioctl_trans ioctl_start[] = { #include <linux/compat_ioctl.h> #define DECLARES #include "compat_ioctl.c" -COMPATIBLE_IOCTL(HDIO_SET_KEEPSETTINGS) -COMPATIBLE_IOCTL(HDIO_SCAN_HWIF) -COMPATIBLE_IOCTL(BLKRASET) -COMPATIBLE_IOCTL(0x4B50) /* KDGHWCLK - not in the kernel, but don't complain */ -COMPATIBLE_IOCTL(0x4B51) /* KDSHWCLK - not in the kernel, but don't complain */ -COMPATIBLE_IOCTL(FIOQSIZE) /* And these ioctls need translation */ /* realtime device */ diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index b5a89c0bdf5..59be85d9a4b 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -86,12 +86,22 @@ EXPORT_SYMBOL(enable_hlt); */ void default_idle(void) { + local_irq_enable(); + if (!atomic_read(&hlt_counter)) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - else - local_irq_enable(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + while (!need_resched()) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + else + local_irq_enable(); + } + set_thread_flag(TIF_POLLING_NRFLAG); + } else { + while (!need_resched()) + cpu_relax(); } } @@ -102,30 +112,16 @@ void default_idle(void) */ static void poll_idle (void) { - int oldval; - local_irq_enable(); - /* - * Deal with another CPU just having chosen a thread to - * run here: - */ - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - asm volatile( - "2:" - "testl %0,%1;" - "rep; nop;" - "je 2b;" - : : - "i" (_TIF_NEED_RESCHED), - "m" (current_thread_info()->flags)); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } + asm volatile( + "2:" + "testl %0,%1;" + "rep; nop;" + "je 2b;" + : : + "i" (_TIF_NEED_RESCHED), + "m" (current_thread_info()->flags)); } void cpu_idle_wait(void) @@ -187,6 +183,8 @@ static inline void play_dead(void) */ void cpu_idle (void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { @@ -204,7 +202,9 @@ void cpu_idle (void) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -219,15 +219,12 @@ static void mwait_idle(void) { local_irq_enable(); - if (!need_resched()) { - set_thread_flag(TIF_POLLING_NRFLAG); - do { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - if (need_resched()) - break; - __mwait(0, 0); - } while (!need_resched()); - clear_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (need_resched()) + break; + __mwait(0, 0); } } diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 4b5b088ec10..c4e59bbdc18 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -472,6 +472,7 @@ void __cpuinit start_secondary(void) * things done here to the most necessary things. */ cpu_init(); + preempt_disable(); smp_callin(); /* otherwise gcc will move up the smp_processor_id before the cpu_init */ diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 08ef6d82ee5..6a44b54ae81 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -96,8 +96,9 @@ void cpu_idle(void) while (1) { while (!need_resched()) platform_idle(); - preempt_enable(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index 0682ffd3817..0dc55cc8691 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -611,46 +611,15 @@ static int iss_net_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } -static int iss_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ -#if 0 - static const struct ethtool_drvinfo info = { - .cmd = ETHTOOL_GDRVINFO, - .driver = DRIVER_NAME, - .version = "42", - }; - void *useraddr; - u32 ethcmd; - - switch (cmd) { - case SIOCETHTOOL: - useraddr = ifr->ifr_data; - if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) - return -EFAULT; - - switch (ethcmd) { - case ETHTOOL_GDRVINFO: - if (copy_to_user(useraddr, &info, sizeof(info))) - return -EFAULT; - return 0; - default: - return -EOPNOTSUPP; - } - default: - return -EINVAL; - } -#endif - return -EINVAL; -} - void iss_net_user_timer_expire(unsigned long _conn) { } -static struct device_driver iss_net_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver iss_net_driver = { + .driver = { + .name = DRIVER_NAME, + }, }; static int driver_registered; @@ -701,7 +670,7 @@ static int iss_net_configure(int index, char *init) /* sysfs register */ if (!driver_registered) { - driver_register(&iss_net_driver); + platform_driver_register(&iss_net_driver); driver_registered = 1; } @@ -730,7 +699,6 @@ static int iss_net_configure(int index, char *init) dev->tx_timeout = iss_net_tx_timeout; dev->set_mac_address = iss_net_set_mac; dev->change_mtu = iss_net_change_mtu; - dev->do_ioctl = iss_net_ioctl; dev->watchdog_timeo = (HZ >> 1); dev->irq = -1; |