diff options
Diffstat (limited to 'arch')
92 files changed, 2768 insertions, 2889 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7a74e3e5f91..50b9afa8ae6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -99,13 +99,6 @@ config ARCH_EBSA110 Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. -config ARCH_CAMELOT - bool "Epxa10db" - help - This enables support for Altera's Excalibur XA10 development board. - If you would like to build your kernel to run on one of these boards - then you must say 'Y' here. Otherwise say 'N' - config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE @@ -213,12 +206,16 @@ config ARCH_AAEC2000 help This enables support for systems based on the Agilent AAEC-2000 +config ARCH_AT91RM9200 + bool "AT91RM9200" + help + Say Y here if you intend to run this kernel on an AT91RM9200-based + board. + endchoice source "arch/arm/mach-clps711x/Kconfig" -source "arch/arm/mach-epxa10db/Kconfig" - source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" @@ -253,6 +250,8 @@ source "arch/arm/mach-aaec2000/Kconfig" source "arch/arm/mach-realview/Kconfig" +source "arch/arm/mach-at91rm9200/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -418,7 +417,8 @@ config LEDS ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ - ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE + ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ + ARCH_AT91RM9200 help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index afaf3a1e903..1fa2a101158 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -84,7 +84,6 @@ endif machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_INTEGRATOR) := integrator - machine-$(CONFIG_ARCH_CAMELOT) := epxa10db textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_IOP3XX) := iop3xx @@ -100,6 +99,7 @@ endif machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview + machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 6b505ce41a7..35ffe0f4ece 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -21,10 +21,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y) OBJS += head-shark.o ofw-shark.o endif -ifeq ($(CONFIG_ARCH_CAMELOT),y) -OBJS += head-epxa10db.o -endif - ifeq ($(CONFIG_ARCH_L7200),y) OBJS += head-l7200.o endif @@ -50,6 +46,10 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif +ifeq ($(CONFIG_ARCH_AT91RM9200),y) +OBJS += head-at91rm9200.o +endif + ifeq ($(CONFIG_DEBUG_ICEDCC),y) OBJS += ice-dcc.o endif diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S new file mode 100644 index 00000000000..2119ea62b54 --- /dev/null +++ b/arch/arm/boot/compressed/head-at91rm9200.S @@ -0,0 +1,57 @@ +/* + * linux/arch/arm/boot/compressed/head-at91rm9200.S + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach-types.h> + + .section ".start", "ax" + + @ Atmel AT91RM9200-DK : 262 + mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff) + orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00) + cmp r7, r3 + beq 99f + + @ Cogent CSB337 : 399 + mov r3, #(MACH_TYPE_CSB337 & 0xff) + orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00) + cmp r7, r3 + beq 99f + + @ Cogent CSB637 : 648 + mov r3, #(MACH_TYPE_CSB637 & 0xff) + orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00) + cmp r7, r3 + beq 99f + + @ Atmel AT91RM9200-EK : 705 + mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff) + orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00) + cmp r7, r3 + beq 99f + + @ Conitec Carmeva : 769 + mov r3, #(MACH_TYPE_CARMEVA & 0xff) + orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00) + cmp r7, r3 + beq 99f + + @ KwikByte KB920x : 612 + mov r3, #(MACH_TYPE_KB9200 & 0xff) + orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00) + cmp r7, r3 + beq 99f + + @ Unknown board, use the AT91RM9200DK board + @ mov r7, #MACH_TYPE_AT91RM9200 + mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) + orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00) + +99: diff --git a/arch/arm/boot/compressed/head-epxa10db.S b/arch/arm/boot/compressed/head-epxa10db.S deleted file mode 100644 index 757681f12a3..00000000000 --- a/arch/arm/boot/compressed/head-epxa10db.S +++ /dev/null @@ -1,5 +0,0 @@ -#include <asm/mach-types.h> -#include <asm/arch/excalibur.h> - - .section ".start", "ax" - mov r7, #MACH_TYPE_CAMELOT diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index ccbb4c0d58c..089c9d59840 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5d92af975d8..cfe6bd8e81c 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig index 35e3a99bcbb..6886001b536 100644 --- a/arch/arm/configs/bast_defconfig +++ b/arch/arm/configs/bast_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index d8fe0f40408..f81a60005cd 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -65,7 +65,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/clps7500_defconfig b/arch/arm/configs/clps7500_defconfig index 90875837140..af9ae538913 100644 --- a/arch/arm/configs/clps7500_defconfig +++ b/arch/arm/configs/clps7500_defconfig @@ -57,7 +57,6 @@ CONFIG_ARCH_CLPS7500=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 40dfe07a8bc..15468a0cf70 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -71,7 +71,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 06229026f78..3c3461e8339 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -87,7 +87,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig index 6f61929b97a..afcfff6140f 100644 --- a/arch/arm/configs/ebsa110_defconfig +++ b/arch/arm/configs/ebsa110_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set CONFIG_ARCH_EBSA110=y -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig index 78b08ed4d5f..6ba7355ff85 100644 --- a/arch/arm/configs/edb7211_defconfig +++ b/arch/arm/configs/edb7211_defconfig @@ -57,7 +57,6 @@ CONFIG_BASE_SMALL=0 CONFIG_ARCH_CLPS711X=y # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index fd7c0042bcc..9592e3925c7 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/ep80219_defconfig index 96342afa9c5..fbe312e757c 100644 --- a/arch/arm/configs/ep80219_defconfig +++ b/arch/arm/configs/ep80219_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/epxa10db_defconfig b/arch/arm/configs/epxa10db_defconfig deleted file mode 100644 index 9fb8b58c495..00000000000 --- a/arch/arm/configs/epxa10db_defconfig +++ /dev/null @@ -1,644 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:46:51 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -CONFIG_ARCH_CAMELOT=y -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# Epxa10db -# - -# -# PLD hotswap support -# -CONFIG_PLD=y -# CONFIG_PLD_HOTSWAP is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM922T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyUA0,115200 initrd=0x00200000,8M root=/dev/ram0 rw" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=y -CONFIG_PPP_DEFLATE=y -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_UART00=y -CONFIG_SERIAL_UART00_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 9737c485072..2a612d23120 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set CONFIG_ARCH_FOOTBRIDGE=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig index b6f688d850d..65dc73a88c4 100644 --- a/arch/arm/configs/fortunet_defconfig +++ b/arch/arm/configs/fortunet_defconfig @@ -57,7 +57,6 @@ CONFIG_BASE_SMALL=0 CONFIG_ARCH_CLPS711X=y # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index b9de07de80f..7a0da0b7fac 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig index 39c13a35454..116920aecef 100644 --- a/arch/arm/configs/h7201_defconfig +++ b/arch/arm/configs/h7201_defconfig @@ -60,7 +60,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index fbf5c244c69..9d62ed16bf5 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index fb41a36a5a6..a45b57582b8 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 27ee7682525..d1ba7fdde81 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -65,7 +65,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set CONFIG_ARCH_INTEGRATOR=y # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig index e71443b9739..c07628ceaf0 100644 --- a/arch/arm/configs/iq31244_defconfig +++ b/arch/arm/configs/iq31244_defconfig @@ -65,7 +65,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig index ab5ad23b27d..18fa1615fdf 100644 --- a/arch/arm/configs/iq80321_defconfig +++ b/arch/arm/configs/iq80321_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig index bb536133ef8..f50035de1ff 100644 --- a/arch/arm/configs/iq80331_defconfig +++ b/arch/arm/configs/iq80331_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iq80332_defconfig index 305f01f3a72..18b3f372ed6 100644 --- a/arch/arm/configs/iq80332_defconfig +++ b/arch/arm/configs/iq80332_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index e6a4d2656fe..d9d6bb86a6f 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 5572cf95d5f..2dc9d499c7d 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 0fddbde8583..4248123815e 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 89b9aa06aa9..ea8f4b478fa 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 613afab6272..4975b914f92 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index b88aeba82bc..ad1048db96f 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 7033829ed14..c3a93284416 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -62,7 +62,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig index d64706d3ff3..67eaa26c264 100644 --- a/arch/arm/configs/lpd7a400_defconfig +++ b/arch/arm/configs/lpd7a400_defconfig @@ -60,7 +60,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 87cbedfb303..208d591ebfc 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -60,7 +60,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index 4bc8717c6f5..81daadcbe0b 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig index 3ca64cabc92..42f6a77bc3c 100644 --- a/arch/arm/configs/lusl7200_defconfig +++ b/arch/arm/configs/lusl7200_defconfig @@ -62,7 +62,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index 153d68594be..b112bd75bda 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig index 6517d167acf..d16f6cd6e03 100644 --- a/arch/arm/configs/mx1ads_defconfig +++ b/arch/arm/configs/mx1ads_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 7fb1f7c7bf4..3d35255c64e 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index 6e81acf94c2..2cae1ead9f9 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -58,7 +58,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set CONFIG_ARCH_FOOTBRIDGE=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 529f0f72e1e..ee3ecbd9002 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index 10fec890578..24e8bdd4cb9 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 21c327883d8..b71d31a4bb5 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 0485b2f1cc2..3f1ec4e304f 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 19184c1010a..b498afdc03b 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 3f97590c91f..33f31080a98 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index e3facc4fe79..d052c8f8051 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -62,7 +62,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index 271823f0d70..c48d1706226 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 5373eeb7d57..2e5a616cc98 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/smdk2410_defconfig b/arch/arm/configs/smdk2410_defconfig index 2c60865fda1..4d123d33c7d 100644 --- a/arch/arm/configs/smdk2410_defconfig +++ b/arch/arm/configs/smdk2410_defconfig @@ -58,7 +58,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 9895539533d..d1ace3abfd8 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -87,7 +87,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index d72f2c75426..2687a225aa6 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index b5645c4462c..1d50d2b98f5 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -710,7 +710,8 @@ int setup_irq(unsigned int irq, struct irqaction *new) desc->pending = 0; desc->disable_depth = 1; - if (new->flags & SA_TRIGGER_MASK) { + if (new->flags & SA_TRIGGER_MASK && + desc->chip->set_type) { unsigned int type = new->flags & SA_TRIGGER_MASK; desc->chip->set_type(irq, type); } diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig new file mode 100644 index 00000000000..4b7218fc3eb --- /dev/null +++ b/arch/arm/mach-at91rm9200/Kconfig @@ -0,0 +1,54 @@ +if ARCH_AT91RM9200 + +menu "AT91RM9200 Implementations" + +comment "AT91RM9200 Board Type" + +config ARCH_AT91RM9200DK + bool "Atmel AT91RM9200-DK Development board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Atmel's AT91RM9200-DK Development board + +config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + depends on ARCH_AT91RM9200 + help + Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit + +config MACH_CSB337 + bool "Cogent CSB337 board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Cogent's CSB337 board + +config MACH_CSB637 + bool "Cogent CSB637 board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Cogent's CSB637 board + +config MACH_CARMEVA + bool "Conitec's ARM&EVA" + depends on ARCH_AT91RM9200 + help + Select this if you are using Conitec's AT91RM9200-MCU-Module + +config MACH_KB9200 + bool "KwikByte's KB920x" + depends on ARCH_AT91RM9200 + help + Select this if you are using KwikByte's KB920x board + + +comment "AT91RM9200 Feature Selections" + +config AT91_PROGRAMMABLE_CLOCKS + bool "Programmable Clocks" + help + Select this if you need to program one or more of the PCK0..PCK3 + programmable clock outputs. + +endmenu + +endif diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile new file mode 100644 index 00000000000..1f2805ca6e2 --- /dev/null +++ b/arch/arm/mach-at91rm9200/Makefile @@ -0,0 +1,27 @@ +# +# Makefile for the linux kernel. +# + +obj-y := clock.o irq.o time.o gpio.o common.o devices.o +obj-m := +obj-n := +obj- := + +# Board-specific support +#obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o +#obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +#obj-$(CONFIG_MACH_CSB337) += board-csb337.o +#obj-$(CONFIG_MACH_CSB637) += board-csb637.o +#obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o +#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o + +# LEDs support +#led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o +#led-$(CONFIG_MACH_AT91RM9200EK) += leds.o +#led-$(CONFIG_MACH_CSB337) += leds.o +#led-$(CONFIG_MACH_CSB637) += leds.o +#led-$(CONFIG_MACH_KB9200) += leds.o +obj-$(CONFIG_LEDS) += $(led-y) + +# VGA support +#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o diff --git a/arch/arm/mach-at91rm9200/Makefile.boot b/arch/arm/mach-at91rm9200/Makefile.boot new file mode 100644 index 00000000000..e667dcc7cd3 --- /dev/null +++ b/arch/arm/mach-at91rm9200/Makefile.boot @@ -0,0 +1,9 @@ +# Note: the following conditions must always be true: +# ZRELADDR == virt_to_phys(TEXTADDR) +# PARAMS_PHYS must be within 4MB of ZRELADDR +# INITRD_PHYS must be in RAM + + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 +initrd_phys-y := 0x20410000 + diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c new file mode 100644 index 00000000000..ec8195a2a3c --- /dev/null +++ b/arch/arm/mach-at91rm9200/clock.c @@ -0,0 +1,620 @@ +/* + * linux/arch/arm/mach-at91rm9200/clock.c + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/clk.h> + +#include <asm/semaphore.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +#include <asm/arch/hardware.h> +#include <asm/arch/board.h> /* for master clock global */ + +#include "generic.h" + +#undef DEBUG + +/* + * There's a lot more which can be done with clocks, including cpufreq + * integration, slow clock mode support (for system suspend), letting + * PLLB be used at other rates (on boards that don't need USB), etc. + */ + +struct clk { + const char *name; + unsigned long rate_hz; + struct clk *parent; + u32 pmc_mask; + void (*mode)(struct clk *, int); + unsigned id:2; /* PCK0..3, or 32k/main/a/b */ + unsigned primary:1; + unsigned pll:1; + unsigned programmable:1; + u16 users; +}; + +static spinlock_t clk_lock; +static u32 at91_pllb_usb_init; + +/* + * Four primary clock sources: two crystal oscillators (32K, main), and + * two PLLs. PLLA usually runs the master clock; and PLLB must run at + * 48 MHz (unless no USB function clocks are needed). The main clock and + * both PLLs are turned off to run in "slow clock mode" (system suspend). + */ +static struct clk clk32k = { + .name = "clk32k", + .rate_hz = AT91_SLOW_CLOCK, + .users = 1, /* always on */ + .id = 0, + .primary = 1, +}; +static struct clk main_clk = { + .name = "main", + .pmc_mask = 1 << 0, /* in PMC_SR */ + .users = 1, + .id = 1, + .primary = 1, +}; +static struct clk plla = { + .name = "plla", + .parent = &main_clk, + .pmc_mask = 1 << 1, /* in PMC_SR */ + .id = 2, + .primary = 1, + .pll = 1, +}; + +static void pllb_mode(struct clk *clk, int is_on) +{ + u32 value; + + if (is_on) { + is_on = AT91_PMC_LOCKB; + value = at91_pllb_usb_init; + } else + value = 0; + + at91_sys_write(AT91_CKGR_PLLBR, value); + + do { + cpu_relax(); + } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); +} + +static struct clk pllb = { + .name = "pllb", + .parent = &main_clk, + .pmc_mask = 1 << 2, /* in PMC_SR */ + .mode = pllb_mode, + .id = 3, + .primary = 1, + .pll = 1, +}; + +static void pmc_sys_mode(struct clk *clk, int is_on) +{ + if (is_on) + at91_sys_write(AT91_PMC_SCER, clk->pmc_mask); + else + at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); +} + +/* USB function clocks (PLLB must be 48 MHz) */ +static struct clk udpck = { + .name = "udpck", + .parent = &pllb, + .pmc_mask = AT91_PMC_UDP, + .mode = pmc_sys_mode, +}; +static struct clk uhpck = { + .name = "uhpck", + .parent = &pllb, + .pmc_mask = AT91_PMC_UHP, + .mode = pmc_sys_mode, +}; + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS +/* + * The four programmable clocks can be parented by any primary clock. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 3, +}; +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + + +/* + * The master clock is divided from the CPU clock (by 1-4). It's used for + * memory, interfaces to on-chip peripherals, the AIC, and sometimes more + * (e.g baud rate generation). It's sourced from one of the primary clocks. + */ +static struct clk mck = { + .name = "mck", + .pmc_mask = 1 << 3, /* in PMC_SR */ + .users = 1, /* (must be) always on */ +}; + +static void pmc_periph_mode(struct clk *clk, int is_on) +{ + if (is_on) + at91_sys_write(AT91_PMC_PCER, clk->pmc_mask); + else + at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask); +} + +static struct clk udc_clk = { + .name = "udc_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_UDP, + .mode = pmc_periph_mode, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_UHP, + .mode = pmc_periph_mode, +}; + +static struct clk *const clock_list[] = { + /* four primary clocks -- MUST BE FIRST! */ + &clk32k, + &main_clk, + &plla, + &pllb, + + /* PLLB children (USB) */ + &udpck, + &uhpck, + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + /* programmable clocks */ + &pck0, + &pck1, + &pck2, + &pck3, +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + + /* MCK and peripherals */ + &mck, + // usart0..usart3 + // mmc + &udc_clk, + // i2c + // spi + // ssc0..ssc2 + // tc0..tc5 + &ohci_clk, + // ether +}; + + +/* clocks are all static for now; no refcounting necessary */ +struct clk *clk_get(struct device *dev, const char *id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(clock_list); i++) { + if (strcmp(id, clock_list[i]->name) == 0) + return clock_list[i]; + } + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +static void __clk_enable(struct clk *clk) +{ + if (clk->parent) + __clk_enable(clk->parent); + if (clk->users++ == 0 && clk->mode) + clk->mode(clk, 1); +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void __clk_disable(struct clk *clk) +{ + BUG_ON(clk->users == 0); + if (--clk->users == 0 && clk->mode) + clk->mode(clk, 0); + if (clk->parent) + __clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long rate; + + spin_lock_irqsave(&clk_lock, flags); + for (;;) { + rate = clk->rate_hz; + if (rate || !clk->parent) + break; + clk = clk->parent; + } + spin_unlock_irqrestore(&clk_lock, flags); + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/*------------------------------------------------------------------------*/ + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + +/* + * For now, only the programmable clocks support reparenting (MCK could + * do this too, with care) or rate changing (the PLLs could do this too, + * ditto MCK but that's more for cpufreq). Drivers may reparent to get + * a better rate match; we don't. + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + unsigned prescale; + unsigned long actual; + + if (!clk->programmable) + return -EINVAL; + spin_lock_irqsave(&clk_lock, flags); + + actual = clk->parent->rate_hz; + for (prescale = 0; prescale < 7; prescale++) { + if (actual && actual <= rate) + break; + actual >>= 1; + } + + spin_unlock_irqrestore(&clk_lock, flags); + return (prescale < 7) ? actual : -ENOENT; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + unsigned prescale; + unsigned long actual; + + if (!clk->programmable) + return -EINVAL; + if (clk->users) + return -EBUSY; + spin_lock_irqsave(&clk_lock, flags); + + actual = clk->parent->rate_hz; + for (prescale = 0; prescale < 7; prescale++) { + if (actual && actual <= rate) { + u32 pckr; + + pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); + pckr &= 0x03; + pckr |= prescale << 2; + at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); + clk->rate_hz = actual; + break; + } + actual >>= 1; + } + + spin_unlock_irqrestore(&clk_lock, flags); + return (prescale < 7) ? actual : -ENOENT; +} +EXPORT_SYMBOL(clk_set_rate); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + + if (clk->users) + return -EBUSY; + if (!parent->primary || !clk->programmable) + return -EINVAL; + spin_lock_irqsave(&clk_lock, flags); + + clk->rate_hz = parent->rate_hz; + clk->parent = parent; + at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id); + + spin_unlock_irqrestore(&clk_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + +/*------------------------------------------------------------------------*/ + +#ifdef CONFIG_DEBUG_FS + +static int at91_clk_show(struct seq_file *s, void *unused) +{ + u32 scsr, pcsr, sr; + unsigned i; + + seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); + seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR)); + + seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); + seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); + seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); + seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); + + seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + for (i = 0; i < 4; i++) + seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i))); + seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); + + seq_printf(s, "\n"); + + for (i = 0; i < ARRAY_SIZE(clock_list); i++) { + char *state; + struct clk *clk = clock_list[i]; + + if (clk->mode == pmc_sys_mode) + state = (scsr & clk->pmc_mask) ? "on" : "off"; + else if (clk->mode == pmc_periph_mode) + state = (pcsr & clk->pmc_mask) ? "on" : "off"; + else if (clk->pmc_mask) + state = (sr & clk->pmc_mask) ? "on" : "off"; + else if (clk == &clk32k || clk == &main_clk) + state = "on"; + else + state = ""; + + seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n", + clk->name, clk->users, state, clk_get_rate(clk), + clk->parent ? clk->parent->name : ""); + } + return 0; +} + +static int at91_clk_open(struct inode *inode, struct file *file) +{ + return single_open(file, at91_clk_show, NULL); +} + +static struct file_operations at91_clk_operations = { + .open = at91_clk_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init at91_clk_debugfs_init(void) +{ + /* /sys/kernel/debug/at91_clk */ + (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations); + + return 0; +} +postcore_initcall(at91_clk_debugfs_init); + +#endif + +/*------------------------------------------------------------------------*/ + +static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 16) & 0x7ff; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else + freq = 0; + if (pll == &pllb && (reg & (1 << 28))) + freq /= 2; + return freq; +} + +static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq) +{ + unsigned i, div = 0, mul = 0, diff = 1 << 30; + unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; + + /* PLL output max 240 MHz (or 180 MHz per errata) */ + if (out_freq > 240000000) + goto fail; + + for (i = 1; i < 256; i++) { + int diff1; + unsigned input, mul1; + + /* + * PLL input between 1MHz and 32MHz per spec, but lower + * frequences seem necessary in some cases so allow 100K. + */ + input = main_freq / i; + if (input < 100000) + continue; + if (input > 32000000) + continue; + + mul1 = out_freq / input; + if (mul1 > 2048) + continue; + if (mul1 < 2) + goto fail; + + diff1 = out_freq - input * mul1; + if (diff1 < 0) + diff1 = -diff1; + if (diff > diff1) { + diff = diff1; + div = i; + mul = mul1; + if (diff == 0) + break; + } + } + if (i == 256 && diff > (out_freq >> 5)) + goto fail; + return ret | ((mul - 1) << 16) | div; +fail: + return 0; +} + +int __init at91_clock_init(unsigned long main_clock) +{ + unsigned tmp, freq, mckr; + + spin_lock_init(&clk_lock); + + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = at91_sys_read(AT91_CKGR_MCFR); + } while (!(tmp & 0x10000)); + main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16); + } + main_clk.rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); + if (plla.rate_hz > 209000000) + pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); + + /* + * USB clock init: choose 48 MHz PLLB value, turn all clocks off, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000; + pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); + at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP)); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP); + at91_sys_write(AT91_CKGR_PLLBR, 0); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP); + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = at91_sys_read(AT91_PMC_MCKR); + mck.parent = clock_list[mckr & AT91_PMC_CSS]; + mck.parent->users++; + freq = mck.parent->rate_hz; + freq /= (1 << ((mckr >> 2) & 3)); /* prescale */ + mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */ + + printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n", + freq / 1000000, (unsigned) mck.rate_hz / 1000000, + (unsigned) main_clock / 1000000, + ((unsigned) main_clock % 1000000) / 1000); + + /* FIXME get rid of master_clock global */ + at91_master_clock = mck.rate_hz; + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + /* establish PCK0..PCK3 parentage */ + for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) { + struct clk *clk = clock_list[tmp], *parent; + u32 pckr; + + if (!clk->programmable) + continue; + + pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); + parent = clock_list[pckr & 3]; + clk->parent = parent; + clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); + } +#else + /* disable unused clocks */ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3); +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + + /* FIXME several unused clocks may still be active... provide + * a CONFIG option to turn off all unused clocks at some point + * before driver init starts. + */ + + return 0; +} diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/common.c new file mode 100644 index 00000000000..3848fd2d559 --- /dev/null +++ b/arch/arm/mach-at91rm9200/common.c @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-at91rm9200/common.c + * + * Copyright (C) 2005 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/hardware.h> + +static struct map_desc at91rm9200_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SPI, + .pfn = __phys_to_pfn(AT91_BASE_SPI), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SSC2, + .pfn = __phys_to_pfn(AT91_BASE_SSC2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SSC1, + .pfn = __phys_to_pfn(AT91_BASE_SSC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SSC0, + .pfn = __phys_to_pfn(AT91_BASE_SSC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US3, + .pfn = __phys_to_pfn(AT91_BASE_US3), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US2, + .pfn = __phys_to_pfn(AT91_BASE_US2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US1, + .pfn = __phys_to_pfn(AT91_BASE_US1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US0, + .pfn = __phys_to_pfn(AT91_BASE_US0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_EMAC, + .pfn = __phys_to_pfn(AT91_BASE_EMAC), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_TWI, + .pfn = __phys_to_pfn(AT91_BASE_TWI), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_MCI, + .pfn = __phys_to_pfn(AT91_BASE_MCI), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_UDP, + .pfn = __phys_to_pfn(AT91_BASE_UDP), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_TCB1, + .pfn = __phys_to_pfn(AT91_BASE_TCB1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_TCB0, + .pfn = __phys_to_pfn(AT91_BASE_TCB0), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +void __init at91rm9200_map_io(void) +{ + iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} + + +unsigned long at91_master_clock; + +EXPORT_SYMBOL(at91_master_clock); + + +int at91_serial_map[AT91_NR_UART]; +int at91_console_port; + +EXPORT_SYMBOL(at91_serial_map); +EXPORT_SYMBOL(at91_console_port); diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c new file mode 100644 index 00000000000..8df3e524565 --- /dev/null +++ b/arch/arm/mach-at91rm9200/devices.c @@ -0,0 +1,291 @@ +/* + * arch/arm/mach-at91rm9200/devices.c + * + * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/config.h> +#include <linux/platform_device.h> + +#include <asm/arch/board.h> +#include <asm/arch/pio.h> + + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = 0xffffffffUL; +static struct at91_usbh_data usbh_data; + +static struct resource at91rm9200_usbh_resource[] = { + [0] = { + .start = AT91_UHP_BASE, + .end = AT91_UHP_BASE + SZ_1M -1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_UHP, + .end = AT91_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_usbh_device = { + .name = "at91rm9200-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbh_data, + }, + .resource = at91rm9200_usbh_resource, + .num_resources = ARRAY_SIZE(at91rm9200_usbh_resource), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + if (!data) + return; + + usbh_data = *data; + platform_device_register(&at91rm9200_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * USB Device (Gadget) + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_GADGET_AT91 +static struct at91_udc_data udc_data; + +static struct resource at91_udc_resources[] = { + { + .start = AT91_BASE_UDP, + .end = AT91_BASE_UDP + SZ_16K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91rm9200_udc_device = { + .name = "at91_udc", + .id = -1, + .dev = { + .platform_data = &udc_data, + }, + .resource = at91_udc_resources, + .num_resources = ARRAY_SIZE(at91_udc_resources), +}; + +void __init at91_add_device_udc(struct at91_udc_data *data) +{ + if (!data) + return; + + if (data->vbus_pin) { + at91_set_gpio_input(data->vbus_pin, 0); + at91_set_deglitch(data->vbus_pin, 1); + } + if (data->pullup_pin) + at91_set_gpio_output(data->pullup_pin, 0); + + udc_data = *data; + platform_device_register(&at91rm9200_udc_device); +} +#else +void __init at91_add_device_udc(struct at91_udc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) +static u64 eth_dmamask = 0xffffffffUL; +static struct at91_eth_data eth_data; + +static struct platform_device at91rm9200_eth_device = { + .name = "at91_ether", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = ð_data, + }, + .num_resources = 0, +}; + +void __init at91_add_device_eth(struct at91_eth_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */ + at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */ + + if (!data->is_rmii) { + at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */ + at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */ + at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */ + } + + eth_data = *data; + platform_device_register(&at91rm9200_eth_device); +} +#else +void __init at91_add_device_eth(struct at91_eth_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Compact Flash / PCMCIA + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) +static struct at91_cf_data cf_data; + +static struct platform_device at91rm9200_cf_device = { + .name = "at91_cf", + .id = -1, + .dev = { + .platform_data = &cf_data, + }, + .num_resources = 0, +}; + +void __init at91_add_device_cf(struct at91_cf_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->irq_pin) { + at91_set_gpio_input(data->irq_pin, 1); + at91_set_deglitch(data->irq_pin, 1); + } + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + + /* outputs, initially off */ + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + at91_set_gpio_output(data->rst_pin, 0); + + cf_data = *data; + platform_device_register(&at91rm9200_cf_device); +} +#else +void __init at91_add_device_cf(struct at91_cf_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE) +static u64 mmc_dmamask = 0xffffffffUL; +static struct at91_mmc_data mmc_data; + +static struct resource at91_mmc_resources[] = { + { + .start = AT91_BASE_MCI, + .end = AT91_BASE_MCI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91rm9200_mmc_device = { + .name = "at91rm9200_mci", + .id = -1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &mmc_data, + }, + .resource = at91_mmc_resources, + .num_resources = ARRAY_SIZE(at91_mmc_resources), +}; + +void __init at91_add_device_mmc(struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA27, 0); + + if (data->is_b) { + /* CMD */ + at91_set_B_periph(AT91_PIN_PA8, 0); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA9, 0); + if (data->wire4) { + at91_set_B_periph(AT91_PIN_PA10, 0); + at91_set_B_periph(AT91_PIN_PA11, 0); + at91_set_B_periph(AT91_PIN_PA12, 0); + } + } else { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA28, 0); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA29, 0); + if (data->wire4) { + at91_set_B_periph(AT91_PIN_PB3, 0); + at91_set_B_periph(AT91_PIN_PB4, 0); + at91_set_B_periph(AT91_PIN_PB5, 0); + } + } + + mmc_data = *data; + platform_device_register(&at91rm9200_mmc_device); +} +#else +void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +#endif + +/* -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h new file mode 100644 index 00000000000..9bd541eba0a --- /dev/null +++ b/arch/arm/mach-at91rm9200/generic.h @@ -0,0 +1,18 @@ +/* + * linux/arch/arm/mach-at91rm9200/generic.h + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +void at91_gpio_irq_setup(unsigned banks); + +struct sys_timer; +extern struct sys_timer at91rm9200_timer; + +extern void __init at91rm9200_map_io(void); + +extern int __init at91_clock_init(unsigned long main_clock); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c new file mode 100644 index 00000000000..2fd2ef583e4 --- /dev/null +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -0,0 +1,302 @@ +/* + * linux/arch/arm/mach-at91rm9200/gpio.c + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/mach/irq.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> + +static const u32 pio_controller_offset[4] = { + AT91_PIOA, + AT91_PIOB, + AT91_PIOC, + AT91_PIOD, +}; + +static inline void __iomem *pin_to_controller(unsigned pin) +{ + void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS; + + pin -= PIN_BASE; + pin /= 32; + if (likely(pin < BGA_GPIO_BANKS)) + return sys_base + pio_controller_offset[pin]; + + return NULL; +} + +static inline unsigned pin_to_mask(unsigned pin) +{ + pin -= PIN_BASE; + return 1 << (pin % 32); +} + + +/*--------------------------------------------------------------------------*/ + +/* Not all hardware capabilities are exposed through these calls; they + * only encapsulate the most common features and modes. (So if you + * want to change signals in groups, do it directly.) + * + * Bootloaders will usually handle some of the pin multiplexing setup. + * The intent is certainly that by the time Linux is fully booted, all + * pins should have been fully initialized. These setup calls should + * only be used by board setup routines, or possibly in driver probe(). + * + * For bootloaders doing all that setup, these calls could be inlined + * as NOPs so Linux won't duplicate any setup code + */ + + +/* + * mux the pin to the "A" internal peripheral role. + */ +int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ASR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_A_periph); + + +/* + * mux the pin to the "B" internal peripheral role. + */ +int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_BSR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_B_periph); + + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and + * configure it for an input. + */ +int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_input); + + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), + * and configure it for an output. + */ +int __init_or_module at91_set_gpio_output(unsigned pin, int value) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_output); + + +/* + * enable/disable the glitch filter; mostly used with IRQ handling. + */ +int __init_or_module at91_set_deglitch(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_deglitch); + +/*--------------------------------------------------------------------------*/ + + +/* + * assuming the pin is muxed as a gpio output, set its value. + */ +int at91_set_gpio_value(unsigned pin, int value) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_value); + + +/* + * read the pin's value (works even if it's not muxed as a gpio). + */ +int at91_get_gpio_value(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + u32 pdsr; + + if (!pio) + return -EINVAL; + pdsr = __raw_readl(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} +EXPORT_SYMBOL(at91_get_gpio_value); + +/*--------------------------------------------------------------------------*/ + + +/* Several AIC controller irqs are dispatched through this GPIO handler. + * To use any AT91_PIN_* as an externally triggered IRQ, first call + * at91_set_gpio_input() then maybe enable its glitch filter. + * Then just request_irq() with the pin ID; it works like any ARM IRQ + * handler, though it always triggers on rising and falling edges. + * + * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after + * configuring them with at91_set_a_periph() or at91_set_b_periph(). + * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering. + */ + +static void gpio_irq_mask(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (pio) + __raw_writel(mask, pio + PIO_IDR); +} + +static void gpio_irq_unmask(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (pio) + __raw_writel(mask, pio + PIO_IER); +} + +static int gpio_irq_type(unsigned pin, unsigned type) +{ + return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL; +} + +static struct irqchip gpio_irqchip = { + .mask = gpio_irq_mask, + .unmask = gpio_irq_unmask, + .set_type = gpio_irq_type, +}; + +static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs *regs) +{ + unsigned pin; + struct irqdesc *gpio; + void __iomem *pio; + u32 isr; + + pio = (void __force __iomem *) desc->chipdata; + + /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->ack(irq); + for (;;) { + isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); + if (!isr) + break; + + pin = (unsigned) desc->data; + gpio = &irq_desc[pin]; + + while (isr) { + if (isr & 1) + gpio->handle(pin, gpio, regs); + pin++; + gpio++; + isr >>= 1; + } + } + desc->chip->unmask(irq); + /* now it may re-trigger */ +} + +/* call this from board-specific init_irq */ +void __init at91_gpio_irq_setup(unsigned banks) +{ + unsigned pioc, pin, id; + + if (banks > 4) + banks = 4; + for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA; + pioc < banks; + pioc++, id++) { + void __iomem *controller; + unsigned i; + + controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc]; + __raw_writel(~0, controller + PIO_IDR); + + set_irq_data(id, (void *) pin); + set_irq_chipdata(id, (void __force *) controller); + + for (i = 0; i < 32; i++, pin++) { + set_irq_chip(pin, &gpio_irqchip); + set_irq_handler(pin, do_simple_IRQ); + set_irq_flags(pin, IRQF_VALID); + } + + set_irq_chained_handler(id, gpio_irq_handler); + + /* enable the PIO peripheral clock */ + at91_sys_write(AT91_PMC_PCER, 1 << id); + } + pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks); +} diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c new file mode 100644 index 00000000000..cb62bc83a1d --- /dev/null +++ b/arch/arm/mach-at91rm9200/irq.c @@ -0,0 +1,170 @@ +/* + * linux/arch/arm/mach-at91rm9200/irq.c + * + * Copyright (C) 2004 SAN People + * Copyright (C) 2004 ATMEL + * Copyright (C) Rick Bronson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/types.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/setup.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> + +#include "generic.h" + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripheral */ + 0, /* Parallel IO Controller A */ + 0, /* Parallel IO Controller B */ + 0, /* Parallel IO Controller C */ + 0, /* Parallel IO Controller D */ + 6, /* USART 0 */ + 6, /* USART 1 */ + 6, /* USART 2 */ + 6, /* USART 3 */ + 0, /* Multimedia Card Interface */ + 4, /* USB Device Port */ + 0, /* Two-Wire Interface */ + 6, /* Serial Peripheral Interface */ + 5, /* Serial Synchronous Controller */ + 5, /* Serial Synchronous Controller */ + 5, /* Serial Synchronous Controller */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ + 3, /* USB Host port */ + 3, /* Ethernet MAC */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0 /* Advanced Interrupt Controller */ +}; + + +static void at91rm9200_mask_irq(unsigned int irq) +{ + /* Disable interrupt on AIC */ + at91_sys_write(AT91_AIC_IDCR, 1 << irq); +} + +static void at91rm9200_unmask_irq(unsigned int irq) +{ + /* Enable interrupt on AIC */ + at91_sys_write(AT91_AIC_IECR, 1 << irq); +} + +static int at91rm9200_irq_type(unsigned irq, unsigned type) +{ + unsigned int smr, srctype; + + /* change triggering only for FIQ and external IRQ0..IRQ6 */ + if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ)) + return -EINVAL; + + switch (type) { + case IRQT_HIGH: + srctype = AT91_AIC_SRCTYPE_HIGH; + break; + case IRQT_RISING: + srctype = AT91_AIC_SRCTYPE_RISING; + break; + case IRQT_LOW: + srctype = AT91_AIC_SRCTYPE_LOW; + break; + case IRQT_FALLING: + srctype = AT91_AIC_SRCTYPE_FALLING; + break; + default: + return -EINVAL; + } + + smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE; + at91_sys_write(AT91_AIC_SMR(irq), smr | srctype); + return 0; +} + +static struct irqchip at91rm9200_irq_chip = { + .ack = at91rm9200_mask_irq, + .mask = at91rm9200_mask_irq, + .unmask = at91rm9200_unmask_irq, + .set_type = at91rm9200_irq_type, +}; + +/* + * Initialize the AIC interrupt controller. + */ +void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) +{ + unsigned int i; + + /* No priority list specified for this board -> use defaults */ + if (priority == NULL) + priority = at91rm9200_default_irq_priority; + + /* + * The IVR is used by macro get_irqnr_and_base to read and verify. + * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. + */ + for (i = 0; i < NR_AIC_IRQS; i++) { + /* Put irq number in Source Vector Register: */ + at91_sys_write(AT91_AIC_SVR(i), i); + /* Store the Source Mode Register as defined in table above */ + at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); + + set_irq_chip(i, &at91rm9200_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + + /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ + if (i < 8) + at91_sys_write(AT91_AIC_EOICR, 0); + } + + /* + * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS + * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU + */ + at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_sys_write(AT91_AIC_DCR, 0); + + /* Disable and clear all interrupts initially */ + at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF); + at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF); +} diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c new file mode 100644 index 00000000000..1b6dd2deeb2 --- /dev/null +++ b/arch/arm/mach-at91rm9200/time.c @@ -0,0 +1,127 @@ +/* + * linux/arch/arm/mach-at91rm9200/time.c + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/time.h> + +/* + * The ST_CRTR is updated asynchronously to the master clock. It is therefore + * necessary to read it twice (with the same value) to ensure accuracy. + */ +static inline unsigned long read_CRTR(void) { + unsigned long x1, x2; + + do { + x1 = at91_sys_read(AT91_ST_CRTR); + x2 = at91_sys_read(AT91_ST_CRTR); + } while (x1 != x2); + + return x1; +} + +/* + * Returns number of microseconds since last timer interrupt. Note that interrupts + * will have been disabled by do_gettimeofday() + * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. + * 'tick' is usecs per jiffy (linux/timex.h). + */ +static unsigned long at91rm9200_gettimeoffset(void) +{ + unsigned long elapsed; + + elapsed = (read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV; + + return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; +} + +/* + * IRQ handler for the timer. + */ +static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long rtar; + + if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */ + write_seqlock(&xtime_lock); + + do { + timer_tick(regs); + rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV; + at91_sys_write(AT91_ST_RTAR, rtar); + } while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; + } + else + return IRQ_NONE; /* not handled */ +} + +static struct irqaction at91rm9200_timer_irq = { + .name = "at91_tick", + .flags = SA_SHIRQ | SA_INTERRUPT, + .handler = at91rm9200_timer_interrupt +}; + +/* + * Set up timer interrupt. + */ +void __init at91rm9200_timer_init(void) +{ + /* Disable all timer interrupts */ + at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); + (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */ + + /* + * Make IRQs happen for the system timer. + */ + setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + + /* Set initial alarm to 0 */ + at91_sys_write(AT91_ST_RTAR, 0); + + /* Real time counter incremented every 30.51758 microseconds */ + at91_sys_write(AT91_ST_RTMR, 1); + + /* Set Period Interval timer */ + at91_sys_write(AT91_ST_PIMR, LATCH); + + /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */ + tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE; + + /* Enable Period Interval Timer interrupt */ + at91_sys_write(AT91_ST_IER, AT91_ST_PITS); +} + +struct sys_timer at91rm9200_timer = { + .init = at91rm9200_timer_init, + .offset = at91rm9200_gettimeoffset, +}; diff --git a/arch/arm/mach-epxa10db/Kconfig b/arch/arm/mach-epxa10db/Kconfig deleted file mode 100644 index 55d896dd495..00000000000 --- a/arch/arm/mach-epxa10db/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if ARCH_CAMELOT - -menu "Epxa10db" - -comment "PLD hotswap support" - -config PLD - bool - default y - -config PLD_HOTSWAP - bool "Support for PLD device hotplugging (experimental)" - depends on EXPERIMENTAL - help - This enables support for the dynamic loading and configuration of - compatible drivers when the contents of the PLD are changed. This - is still experimental and requires configuration tools which are - not yet generally available. Say N here. You must enable the kernel - module loader for this feature to work. - -endmenu - -endif diff --git a/arch/arm/mach-epxa10db/Makefile b/arch/arm/mach-epxa10db/Makefile deleted file mode 100644 index 24fbd7d3a3c..00000000000 --- a/arch/arm/mach-epxa10db/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := arch.o irq.o mm.o time.o -obj-m := -obj-n := -obj- := - diff --git a/arch/arm/mach-epxa10db/Makefile.boot b/arch/arm/mach-epxa10db/Makefile.boot deleted file mode 100644 index 28bec7d3fc8..00000000000 --- a/arch/arm/mach-epxa10db/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x00008000 - diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c deleted file mode 100644 index 44c56571d18..00000000000 --- a/arch/arm/mach-epxa10db/arch.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/arch.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_8250.h> - -#include <asm/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -static struct plat_serial8250_port serial_platform_data[] = { - { - .iobase = 0x3f8, - .irq = IRQ_UARTINT0, -#error FIXME - .uartclk = 0, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .iobase = 0x2f8, - .irq = IRQ_UARTINT1, -#error FIXME - .uartclk = 0, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -extern void epxa10db_map_io(void); -extern void epxa10db_init_irq(void); -extern struct sys_timer epxa10db_timer; - -MACHINE_START(CAMELOT, "Altera Epxa10db") - /* Maintainer: Altera Corporation */ - .phys_ram = 0x00000000, - .phys_io = 0x7fffc000, - .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, - .map_io = epxa10db_map_io, - .init_irq = epxa10db_init_irq, - .timer = &epxa10db_timer, -MACHINE_END - diff --git a/arch/arm/mach-epxa10db/irq.c b/arch/arm/mach-epxa10db/irq.c deleted file mode 100644 index 9bf927e1330..00000000000 --- a/arch/arm/mach-epxa10db/irq.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/irq.c - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/stddef.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <asm/io.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/irq.h> -#include <asm/arch/platform.h> -#include <asm/arch/int_ctrl00.h> - - -static void epxa_mask_irq(unsigned int irq) -{ - writel(1 << irq, INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE))); -} - -static void epxa_unmask_irq(unsigned int irq) -{ - writel(1 << irq, INT_MS(IO_ADDRESS(EXC_INT_CTRL00_BASE))); -} - - -static struct irqchip epxa_irq_chip = { - .ack = epxa_mask_irq, - .mask = epxa_mask_irq, - .unmask = epxa_unmask_irq, -}; - -static struct resource irq_resource = { - .name = "irq_handler", - .start = IO_ADDRESS(EXC_INT_CTRL00_BASE), - .end = IO_ADDRESS(INT_PRIORITY_FC(EXC_INT_CTRL00_BASE))+4, -}; - -void __init epxa10db_init_irq(void) -{ - unsigned int i; - - request_resource(&iomem_resource, &irq_resource); - - /* - * This bit sets up the interrupt controller using - * the 6 PLD interrupts mode (the default) each - * irqs is assigned a priority which is the same - * as its interrupt number. This scheme is used because - * its easy, but you may want to change it depending - * on the contents of your PLD - */ - - writel(3,INT_MODE(IO_ADDRESS(EXC_INT_CTRL00_BASE))); - for (i = 0; i < NR_IRQS; i++){ - writel(i+1, INT_PRIORITY_P0(IO_ADDRESS(EXC_INT_CTRL00_BASE)) + (4*i)); - set_irq_chip(i,&epxa_irq_chip); - set_irq_handler(i,do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - - /* Disable all interrupts */ - writel(-1,INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE))); - -} diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c deleted file mode 100644 index cfd0d2182d4..00000000000 --- a/arch/arm/mach-epxa10db/mm.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/mm.c - * - * MM routines for Altera'a Epxa10db board - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/sizes.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - -/* Page table mapping for I/O region */ - -static struct map_desc epxa10db_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(EXC_REGISTERS_BASE), - .pfn = __phys_to_pfn(EXC_REGISTERS_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE), - .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE), - .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE), - .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE), - .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE), - .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE), - .length = SZ_16M, - .type = MT_DEVICE - } -}; - -void __init epxa10db_map_io(void) -{ - iotable_init(epxa10db_io_desc, ARRAY_SIZE(epxa10db_io_desc)); -} diff --git a/arch/arm/mach-epxa10db/time.c b/arch/arm/mach-epxa10db/time.c deleted file mode 100644 index 4b1084dde8d..00000000000 --- a/arch/arm/mach-epxa10db/time.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/time.c - * - * Copyright (C) 2000 Deep Blue Solutions - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/sched.h> - -#include <asm/hardware.h> -#include <asm/system.h> -#include <asm/leds.h> - -#include <asm/mach/time.h> - -#define TIMER00_TYPE (volatile unsigned int*) -#include <asm/arch/timer00.h> - -static int epxa10db_set_rtc(void) -{ - return 1; -} - -static int epxa10db_rtc_init(void) -{ - set_rtc = epxa10db_set_rtc; - - return 0; -} - -__initcall(epxa10db_rtc_init); - - -/* - * IRQ handler for the timer - */ -static irqreturn_t -epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - write_seqlock(&xtime_lock); - - // ...clear the interrupt - *TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))|=TIMER0_CR_CI_MSK; - - timer_tick(regs); - write_sequnlock(&xtime_lock); - - return IRQ_HANDLED; -} - -static struct irqaction epxa10db_timer_irq = { - .name = "Excalibur Timer Tick", - .flags = SA_INTERRUPT | SA_TIMER, - .handler = epxa10db_timer_interrupt, -}; - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -static void __init epxa10db_timer_init(void) -{ - /* Start the timer */ - *TIMER0_LIMIT(IO_ADDRESS(EXC_TIMER00_BASE))=(unsigned int)(EXC_AHB2_CLK_FREQUENCY/200); - *TIMER0_PRESCALE(IO_ADDRESS(EXC_TIMER00_BASE))=1; - *TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))=TIMER0_CR_IE_MSK | TIMER0_CR_S_MSK; - - setup_irq(IRQ_TIMER0, &epxa10db_timer_irq); -} - -struct sys_timer epxa10db_timer = { - .init = epxa10db_timer_init, -}; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index bd900b7ab33..92ff5dc0735 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -184,7 +184,7 @@ static void __init omap_perseus2_map_io(void) omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); /* - * Ethernet support trough the debug board + * Ethernet support through the debug board * CS1 timings setup */ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 5830ae3ddd1..fc09ba92d66 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -253,100 +253,101 @@ struct clk s3c24xx_uclk = { /* clock definitions */ static struct clk init_clocks[] = { - { .name = "nand", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND - }, - { .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC - }, - { .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH - }, - { .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD - }, - { .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT - }, - { .name = "sdi", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI - }, - { .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0 - }, - { .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1 - }, - { .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2 - }, - { .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO - }, - { .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC - }, - { .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC - }, - { .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC - }, - { .name = "iis", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS - }, - { .name = "spi", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI - }, - { .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = 0 + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_NAND, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SDI, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIS, + }, { + .name = "spi", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SPI, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = 0, } }; @@ -390,16 +391,15 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, clk_p.rate = pclk; clk_f.rate = fclk; - /* it looks like just setting the register here is not good - * enough, and causes the odd hang at initial boot time, so - * do all of them indivdually. + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. * - * I think disabling the LCD clock if the LCD is active is - * very dangerous, and therefore the bootloader should be - * careful to not enable the LCD clock if it is not needed. - * - * and of course, this looks neater - */ + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e84fdde6edf..3b79d0e2345 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,8 +62,8 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 - default y if ARCH_S3C2410 + depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 + default y if ARCH_S3C2410 || ARCH_AT91RM9200 select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -83,8 +83,8 @@ config CPU_ARM920T # ARM922T config CPU_ARM922T bool "Support ARM922T processor" if ARCH_INTEGRATOR - depends on ARCH_CAMELOT || ARCH_LH7A40X || ARCH_INTEGRATOR - default y if ARCH_CAMELOT || ARCH_LH7A40X + depends on ARCH_LH7A40X || ARCH_INTEGRATOR + default y if ARCH_LH7A40X select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 10901398e4a..de3ce1eec2e 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -86,11 +86,12 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, } static int -remap_area_pages(unsigned long start, unsigned long phys_addr, +remap_area_pages(unsigned long start, unsigned long pfn, unsigned long size, unsigned long flags) { unsigned long address = start; unsigned long end = start + size; + unsigned long phys_addr = __pfn_to_phys(pfn); int err = 0; pgd_t * dir; @@ -130,36 +131,44 @@ remap_area_pages(unsigned long start, unsigned long phys_addr, * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. */ void __iomem * +__ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, + unsigned long flags) +{ + unsigned long addr; + struct vm_struct * area; + + area = get_vm_area(size, VM_IOREMAP); + if (!area) + return NULL; + addr = (unsigned long)area->addr; + if (remap_area_pages(addr, pfn, size, flags)) { + vfree(addr); + return NULL; + } + return (void __iomem *) (offset + (char *)addr); +} +EXPORT_SYMBOL(__ioremap_pfn); + +void __iomem * __ioremap(unsigned long phys_addr, size_t size, unsigned long flags) { - void * addr; - struct vm_struct * area; - unsigned long offset, last_addr; + unsigned long last_addr; + unsigned long offset = phys_addr & ~PAGE_MASK; + unsigned long pfn = __phys_to_pfn(phys_addr); - /* Don't allow wraparound or zero size */ + /* + * Don't allow wraparound or zero size + */ last_addr = phys_addr + size - 1; if (!size || last_addr < phys_addr) return NULL; /* - * Mappings have to be page-aligned + * Page align the mapping size */ - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; size = PAGE_ALIGN(last_addr + 1) - phys_addr; - /* - * Ok, go for it.. - */ - area = get_vm_area(size, VM_IOREMAP); - if (!area) - return NULL; - addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { - vfree(addr); - return NULL; - } - return (void __iomem *) (offset + (char *)addr); + return __ioremap_pfn(pfn, offset, size, flags); } EXPORT_SYMBOL(__ioremap); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 465487470d0..d0f9bb5e902 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Nov 25 14:43:04 2005 +# Last update: Mon Jan 9 12:56:42 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -910,3 +910,31 @@ mbus MACH_MBUS MBUS 896 nadia2vb MACH_NADIA2VB NADIA2VB 897 r1000 MACH_R1000 R1000 898 hw90250 MACH_HW90250 HW90250 899 +omap_2430sdp MACH_OMAP_2430SDP OMAP_2430SDP 900 +davinci_evm MACH_DAVINCI_EVM DAVINCI_EVM 901 +omap_tornado MACH_OMAP_TORNADO OMAP_TORNADO 902 +olocreek MACH_OLOCREEK OLOCREEK 903 +palmz72 MACH_PALMZ72 PALMZ72 904 +nxdb500 MACH_NXDB500 NXDB500 905 +apf9328 MACH_APF9328 APF9328 906 +omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 +omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 +xscale_treo650 MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650 909 +acumen MACH_ACUMEN ACUMEN 910 +xp100 MACH_XP100 XP100 911 +fs2410 MACH_FS2410 FS2410 912 +pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913 +sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914 +bsemserver MACH_BSEMSERVER BSEMSERVER 915 +netclient MACH_NETCLIENT NETCLIENT 916 +xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917 +xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918 +omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 +argonlvevb MACH_ARGONLVEVB ARGONLVEVB 920 +rea_2d MACH_REA_2D REA_2D 921 +eti3e524 MACH_TI3E524 TI3E524 922 +ateb9200 MACH_ATEB9200 ATEB9200 923 +auckland MACH_AUCKLAND AUCKLAND 924 +ak3220m MACH_AK3320M AK3320M 925 +duramax MACH_DURAMAX DURAMAX 926 +n35 MACH_N35 N35 927 diff --git a/arch/i386/crypto/aes-i586-asm.S b/arch/i386/crypto/aes-i586-asm.S index 7b73c67cb4e..911b15377f2 100644 --- a/arch/i386/crypto/aes-i586-asm.S +++ b/arch/i386/crypto/aes-i586-asm.S @@ -255,18 +255,17 @@ aes_enc_blk: xor 8(%ebp),%r4 xor 12(%ebp),%r5 - sub $8,%esp // space for register saves on stack - add $16,%ebp // increment to next round key - sub $10,%r3 - je 4f // 10 rounds for 128-bit key - add $32,%ebp - sub $2,%r3 - je 3f // 12 rounds for 128-bit key - add $32,%ebp - -2: fwd_rnd1( -64(%ebp) ,ft_tab) // 14 rounds for 128-bit key + sub $8,%esp // space for register saves on stack + add $16,%ebp // increment to next round key + cmp $12,%r3 + jb 4f // 10 rounds for 128-bit key + lea 32(%ebp),%ebp + je 3f // 12 rounds for 192-bit key + lea 32(%ebp),%ebp + +2: fwd_rnd1( -64(%ebp) ,ft_tab) // 14 rounds for 256-bit key fwd_rnd2( -48(%ebp) ,ft_tab) -3: fwd_rnd1( -32(%ebp) ,ft_tab) // 12 rounds for 128-bit key +3: fwd_rnd1( -32(%ebp) ,ft_tab) // 12 rounds for 192-bit key fwd_rnd2( -16(%ebp) ,ft_tab) 4: fwd_rnd1( (%ebp) ,ft_tab) // 10 rounds for 128-bit key fwd_rnd2( +16(%ebp) ,ft_tab) @@ -334,18 +333,17 @@ aes_dec_blk: xor 8(%ebp),%r4 xor 12(%ebp),%r5 - sub $8,%esp // space for register saves on stack - sub $16,%ebp // increment to next round key - sub $10,%r3 - je 4f // 10 rounds for 128-bit key - sub $32,%ebp - sub $2,%r3 - je 3f // 12 rounds for 128-bit key - sub $32,%ebp + sub $8,%esp // space for register saves on stack + sub $16,%ebp // increment to next round key + cmp $12,%r3 + jb 4f // 10 rounds for 128-bit key + lea -32(%ebp),%ebp + je 3f // 12 rounds for 192-bit key + lea -32(%ebp),%ebp -2: inv_rnd1( +64(%ebp), it_tab) // 14 rounds for 128-bit key +2: inv_rnd1( +64(%ebp), it_tab) // 14 rounds for 256-bit key inv_rnd2( +48(%ebp), it_tab) -3: inv_rnd1( +32(%ebp), it_tab) // 12 rounds for 128-bit key +3: inv_rnd1( +32(%ebp), it_tab) // 12 rounds for 192-bit key inv_rnd2( +16(%ebp), it_tab) 4: inv_rnd1( (%ebp), it_tab) // 10 rounds for 128-bit key inv_rnd2( -16(%ebp), it_tab) diff --git a/arch/i386/crypto/aes.c b/arch/i386/crypto/aes.c index 88ee85c3b43..a50397b1d5c 100644 --- a/arch/i386/crypto/aes.c +++ b/arch/i386/crypto/aes.c @@ -36,6 +36,8 @@ * Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com> * */ + +#include <asm/byteorder.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -59,7 +61,6 @@ struct aes_ctx { }; #define WPOLY 0x011b -#define u32_in(x) le32_to_cpup((const __le32 *)(x)) #define bytes2word(b0, b1, b2, b3) \ (((u32)(b3) << 24) | ((u32)(b2) << 16) | ((u32)(b1) << 8) | (b0)) @@ -93,7 +94,6 @@ static u32 rcon_tab[RC_LENGTH]; u32 ft_tab[4][256]; u32 fl_tab[4][256]; -static u32 ls_tab[4][256]; static u32 im_tab[4][256]; u32 il_tab[4][256]; u32 it_tab[4][256]; @@ -144,15 +144,6 @@ static void gen_tabs(void) fl_tab[2][i] = upr(w, 2); fl_tab[3][i] = upr(w, 3); - /* - * table for key schedule if fl_tab above is - * not of the required form - */ - ls_tab[0][i] = w; - ls_tab[1][i] = upr(w, 1); - ls_tab[2][i] = upr(w, 2); - ls_tab[3][i] = upr(w, 3); - b = fi(inv_affine((u8)i)); w = bytes2word(fe(b), f9(b), fd(b), fb(b)); @@ -393,13 +384,14 @@ aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) int i; u32 ss[8]; struct aes_ctx *ctx = ctx_arg; + const __le32 *key = (const __le32 *)in_key; /* encryption schedule */ - ctx->ekey[0] = ss[0] = u32_in(in_key); - ctx->ekey[1] = ss[1] = u32_in(in_key + 4); - ctx->ekey[2] = ss[2] = u32_in(in_key + 8); - ctx->ekey[3] = ss[3] = u32_in(in_key + 12); + ctx->ekey[0] = ss[0] = le32_to_cpu(key[0]); + ctx->ekey[1] = ss[1] = le32_to_cpu(key[1]); + ctx->ekey[2] = ss[2] = le32_to_cpu(key[2]); + ctx->ekey[3] = ss[3] = le32_to_cpu(key[3]); switch(key_len) { case 16: @@ -410,8 +402,8 @@ aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) break; case 24: - ctx->ekey[4] = ss[4] = u32_in(in_key + 16); - ctx->ekey[5] = ss[5] = u32_in(in_key + 20); + ctx->ekey[4] = ss[4] = le32_to_cpu(key[4]); + ctx->ekey[5] = ss[5] = le32_to_cpu(key[5]); for (i = 0; i < 7; i++) ke6(ctx->ekey, i); kel6(ctx->ekey, 7); @@ -419,10 +411,10 @@ aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) break; case 32: - ctx->ekey[4] = ss[4] = u32_in(in_key + 16); - ctx->ekey[5] = ss[5] = u32_in(in_key + 20); - ctx->ekey[6] = ss[6] = u32_in(in_key + 24); - ctx->ekey[7] = ss[7] = u32_in(in_key + 28); + ctx->ekey[4] = ss[4] = le32_to_cpu(key[4]); + ctx->ekey[5] = ss[5] = le32_to_cpu(key[5]); + ctx->ekey[6] = ss[6] = le32_to_cpu(key[6]); + ctx->ekey[7] = ss[7] = le32_to_cpu(key[7]); for (i = 0; i < 6; i++) ke8(ctx->ekey, i); kel8(ctx->ekey, 6); @@ -436,10 +428,10 @@ aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) /* decryption schedule */ - ctx->dkey[0] = ss[0] = u32_in(in_key); - ctx->dkey[1] = ss[1] = u32_in(in_key + 4); - ctx->dkey[2] = ss[2] = u32_in(in_key + 8); - ctx->dkey[3] = ss[3] = u32_in(in_key + 12); + ctx->dkey[0] = ss[0] = le32_to_cpu(key[0]); + ctx->dkey[1] = ss[1] = le32_to_cpu(key[1]); + ctx->dkey[2] = ss[2] = le32_to_cpu(key[2]); + ctx->dkey[3] = ss[3] = le32_to_cpu(key[3]); switch (key_len) { case 16: @@ -450,8 +442,8 @@ aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) break; case 24: - ctx->dkey[4] = ff(ss[4] = u32_in(in_key + 16)); - ctx->dkey[5] = ff(ss[5] = u32_in(in_key + 20)); + ctx->dkey[4] = ff(ss[4] = le32_to_cpu(key[4])); + ctx->dkey[5] = ff(ss[5] = le32_to_cpu(key[5])); kdf6(ctx->dkey, 0); for (i = 1; i < 7; i++) kd6(ctx->dkey, i); @@ -459,10 +451,10 @@ aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) break; case 32: - ctx->dkey[4] = ff(ss[4] = u32_in(in_key + 16)); - ctx->dkey[5] = ff(ss[5] = u32_in(in_key + 20)); - ctx->dkey[6] = ff(ss[6] = u32_in(in_key + 24)); - ctx->dkey[7] = ff(ss[7] = u32_in(in_key + 28)); + ctx->dkey[4] = ff(ss[4] = le32_to_cpu(key[4])); + ctx->dkey[5] = ff(ss[5] = le32_to_cpu(key[5])); + ctx->dkey[6] = ff(ss[6] = le32_to_cpu(key[6])); + ctx->dkey[7] = ff(ss[7] = le32_to_cpu(key[7])); kdf8(ctx->dkey, 0); for (i = 1; i < 6; i++) kd8(ctx->dkey, i); @@ -484,6 +476,8 @@ static inline void aes_decrypt(void *ctx, u8 *dst, const u8 *src) static struct crypto_alg aes_alg = { .cra_name = "aes", + .cra_driver_name = "aes-i586", + .cra_priority = 200, .cra_flags = CRYPTO_ALG_TYPE_CIPHER, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct aes_ctx), diff --git a/arch/i386/kernel/cpu/changelog b/arch/i386/kernel/cpu/changelog deleted file mode 100644 index cef76b80a71..00000000000 --- a/arch/i386/kernel/cpu/changelog +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean - * and Martin Mares, November 1997. - * - * Force Cyrix 6x86(MX) and M II processors to report MTRR capability - * and Cyrix "coma bug" recognition by - * Zoltán Böszörményi <zboszor@mail.externet.hu> February 1999. - * - * Force Centaur C6 processors to report MTRR capability. - * Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999. - * - * Intel Mobile Pentium II detection fix. Sean Gilley, June 1999. - * - * IDT Winchip tweaks, misc clean ups. - * Dave Jones <davej@suse.de>, August 1999 - * - * Better detection of Centaur/IDT WinChip models. - * Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999. - * - * Cleaned up cache-detection code - * Dave Jones <davej@suse.de>, October 1999 - * - * Added proper L2 cache detection for Coppermine - * Dragan Stancevic <visitor@valinux.com>, October 1999 - * - * Added the original array for capability flags but forgot to credit - * myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff - * Jauder Ho <jauderho@carumba.com>, January 2000 - * - * Detection for Celeron coppermine, identify_cpu() overhauled, - * and a few other clean ups. - * Dave Jones <davej@suse.de>, April 2000 - * - * Pentium III FXSR, SSE support - * General FPU state handling cleanups - * Gareth Hughes <gareth@valinux.com>, May 2000 - * - * Added proper Cascades CPU and L2 cache detection for Cascades - * and 8-way type cache happy bunch from Intel:^) - * Dragan Stancevic <visitor@valinux.com>, May 2000 - * - * Forward port AMD Duron errata T13 from 2.2.17pre - * Dave Jones <davej@suse.de>, August 2000 - * - * Forward port lots of fixes/improvements from 2.2.18pre - * Cyrix III, Pentium IV support. - * Dave Jones <davej@suse.de>, October 2000 - * - * Massive cleanup of CPU detection and bug handling; - * Transmeta CPU detection, - * H. Peter Anvin <hpa@zytor.com>, November 2000 - * - * VIA C3 Support. - * Dave Jones <davej@suse.de>, March 2001 - * - * AMD Athlon/Duron/Thunderbird bluesmoke support. - * Dave Jones <davej@suse.de>, April 2001. - * - * CacheSize bug workaround updates for AMD, Intel & VIA Cyrix. - * Dave Jones <davej@suse.de>, September, October 2001. - * - */ - diff --git a/arch/i386/kernel/cpu/mtrr/changelog b/arch/i386/kernel/cpu/mtrr/changelog deleted file mode 100644 index af136853595..00000000000 --- a/arch/i386/kernel/cpu/mtrr/changelog +++ /dev/null @@ -1,229 +0,0 @@ - ChangeLog - - Prehistory Martin Tischhäuser <martin@ikcbarka.fzk.de> - Initial register-setting code (from proform-1.0). - 19971216 Richard Gooch <rgooch@atnf.csiro.au> - Original version for /proc/mtrr interface, SMP-safe. - v1.0 - 19971217 Richard Gooch <rgooch@atnf.csiro.au> - Bug fix for ioctls()'s. - Added sample code in Documentation/mtrr.txt - v1.1 - 19971218 Richard Gooch <rgooch@atnf.csiro.au> - Disallow overlapping regions. - 19971219 Jens Maurer <jmaurer@menuett.rhein-main.de> - Register-setting fixups. - v1.2 - 19971222 Richard Gooch <rgooch@atnf.csiro.au> - Fixups for kernel 2.1.75. - v1.3 - 19971229 David Wragg <dpw@doc.ic.ac.uk> - Register-setting fixups and conformity with Intel conventions. - 19971229 Richard Gooch <rgooch@atnf.csiro.au> - Cosmetic changes and wrote this ChangeLog ;-) - 19980106 Richard Gooch <rgooch@atnf.csiro.au> - Fixups for kernel 2.1.78. - v1.4 - 19980119 David Wragg <dpw@doc.ic.ac.uk> - Included passive-release enable code (elsewhere in PCI setup). - v1.5 - 19980131 Richard Gooch <rgooch@atnf.csiro.au> - Replaced global kernel lock with private spinlock. - v1.6 - 19980201 Richard Gooch <rgooch@atnf.csiro.au> - Added wait for other CPUs to complete changes. - v1.7 - 19980202 Richard Gooch <rgooch@atnf.csiro.au> - Bug fix in definition of <set_mtrr> for UP. - v1.8 - 19980319 Richard Gooch <rgooch@atnf.csiro.au> - Fixups for kernel 2.1.90. - 19980323 Richard Gooch <rgooch@atnf.csiro.au> - Move SMP BIOS fixup before secondary CPUs call <calibrate_delay> - v1.9 - 19980325 Richard Gooch <rgooch@atnf.csiro.au> - Fixed test for overlapping regions: confused by adjacent regions - 19980326 Richard Gooch <rgooch@atnf.csiro.au> - Added wbinvd in <set_mtrr_prepare>. - 19980401 Richard Gooch <rgooch@atnf.csiro.au> - Bug fix for non-SMP compilation. - 19980418 David Wragg <dpw@doc.ic.ac.uk> - Fixed-MTRR synchronisation for SMP and use atomic operations - instead of spinlocks. - 19980418 Richard Gooch <rgooch@atnf.csiro.au> - Differentiate different MTRR register classes for BIOS fixup. - v1.10 - 19980419 David Wragg <dpw@doc.ic.ac.uk> - Bug fix in variable MTRR synchronisation. - v1.11 - 19980419 Richard Gooch <rgooch@atnf.csiro.au> - Fixups for kernel 2.1.97. - v1.12 - 19980421 Richard Gooch <rgooch@atnf.csiro.au> - Safer synchronisation across CPUs when changing MTRRs. - v1.13 - 19980423 Richard Gooch <rgooch@atnf.csiro.au> - Bugfix for SMP systems without MTRR support. - v1.14 - 19980427 Richard Gooch <rgooch@atnf.csiro.au> - Trap calls to <mtrr_add> and <mtrr_del> on non-MTRR machines. - v1.15 - 19980427 Richard Gooch <rgooch@atnf.csiro.au> - Use atomic bitops for setting SMP change mask. - v1.16 - 19980428 Richard Gooch <rgooch@atnf.csiro.au> - Removed spurious diagnostic message. - v1.17 - 19980429 Richard Gooch <rgooch@atnf.csiro.au> - Moved register-setting macros into this file. - Moved setup code from init/main.c to i386-specific areas. - v1.18 - 19980502 Richard Gooch <rgooch@atnf.csiro.au> - Moved MTRR detection outside conditionals in <mtrr_init>. - v1.19 - 19980502 Richard Gooch <rgooch@atnf.csiro.au> - Documentation improvement: mention Pentium II and AGP. - v1.20 - 19980521 Richard Gooch <rgooch@atnf.csiro.au> - Only manipulate interrupt enable flag on local CPU. - Allow enclosed uncachable regions. - v1.21 - 19980611 Richard Gooch <rgooch@atnf.csiro.au> - Always define <main_lock>. - v1.22 - 19980901 Richard Gooch <rgooch@atnf.csiro.au> - Removed module support in order to tidy up code. - Added sanity check for <mtrr_add>/<mtrr_del> before <mtrr_init>. - Created addition queue for prior to SMP commence. - v1.23 - 19980902 Richard Gooch <rgooch@atnf.csiro.au> - Ported patch to kernel 2.1.120-pre3. - v1.24 - 19980910 Richard Gooch <rgooch@atnf.csiro.au> - Removed sanity checks and addition queue: Linus prefers an OOPS. - v1.25 - 19981001 Richard Gooch <rgooch@atnf.csiro.au> - Fixed harmless compiler warning in include/asm-i386/mtrr.h - Fixed version numbering and history for v1.23 -> v1.24. - v1.26 - 19990118 Richard Gooch <rgooch@atnf.csiro.au> - Added devfs support. - v1.27 - 19990123 Richard Gooch <rgooch@atnf.csiro.au> - Changed locking to spin with reschedule. - Made use of new <smp_call_function>. - v1.28 - 19990201 Zoltán Böszörményi <zboszor@mail.externet.hu> - Extended the driver to be able to use Cyrix style ARRs. - 19990204 Richard Gooch <rgooch@atnf.csiro.au> - Restructured Cyrix support. - v1.29 - 19990204 Zoltán Böszörményi <zboszor@mail.externet.hu> - Refined ARR support: enable MAPEN in set_mtrr_prepare() - and disable MAPEN in set_mtrr_done(). - 19990205 Richard Gooch <rgooch@atnf.csiro.au> - Minor cleanups. - v1.30 - 19990208 Zoltán Böszörményi <zboszor@mail.externet.hu> - Protect plain 6x86s (and other processors without the - Page Global Enable feature) against accessing CR4 in - set_mtrr_prepare() and set_mtrr_done(). - 19990210 Richard Gooch <rgooch@atnf.csiro.au> - Turned <set_mtrr_up> and <get_mtrr> into function pointers. - v1.31 - 19990212 Zoltán Böszörményi <zboszor@mail.externet.hu> - Major rewrite of cyrix_arr_init(): do not touch ARRs, - leave them as the BIOS have set them up. - Enable usage of all 8 ARRs. - Avoid multiplications by 3 everywhere and other - code clean ups/speed ups. - 19990213 Zoltán Böszörményi <zboszor@mail.externet.hu> - Set up other Cyrix processors identical to the boot cpu. - Since Cyrix don't support Intel APIC, this is l'art pour l'art. - Weigh ARRs by size: - If size <= 32M is given, set up ARR# we were given. - If size > 32M is given, set up ARR7 only if it is free, - fail otherwise. - 19990214 Zoltán Böszörményi <zboszor@mail.externet.hu> - Also check for size >= 256K if we are to set up ARR7, - mtrr_add() returns the value it gets from set_mtrr() - 19990218 Zoltán Böszörményi <zboszor@mail.externet.hu> - Remove Cyrix "coma bug" workaround from here. - Moved to linux/arch/i386/kernel/setup.c and - linux/include/asm-i386/bugs.h - 19990228 Richard Gooch <rgooch@atnf.csiro.au> - Added MTRRIOC_KILL_ENTRY ioctl(2) - Trap for counter underflow in <mtrr_file_del>. - Trap for 4 MiB aligned regions for PPro, stepping <= 7. - 19990301 Richard Gooch <rgooch@atnf.csiro.au> - Created <get_free_region> hook. - 19990305 Richard Gooch <rgooch@atnf.csiro.au> - Temporarily disable AMD support now MTRR capability flag is set. - v1.32 - 19990308 Zoltán Böszörményi <zboszor@mail.externet.hu> - Adjust my changes (19990212-19990218) to Richard Gooch's - latest changes. (19990228-19990305) - v1.33 - 19990309 Richard Gooch <rgooch@atnf.csiro.au> - Fixed typo in <printk> message. - 19990310 Richard Gooch <rgooch@atnf.csiro.au> - Support K6-II/III based on Alan Cox's <alan@redhat.com> patches. - v1.34 - 19990511 Bart Hartgers <bart@etpmod.phys.tue.nl> - Support Centaur C6 MCR's. - 19990512 Richard Gooch <rgooch@atnf.csiro.au> - Minor cleanups. - v1.35 - 19990707 Zoltán Böszörményi <zboszor@mail.externet.hu> - Check whether ARR3 is protected in cyrix_get_free_region() - and mtrr_del(). The code won't attempt to delete or change it - from now on if the BIOS protected ARR3. It silently skips ARR3 - in cyrix_get_free_region() or returns with an error code from - mtrr_del(). - 19990711 Zoltán Böszörményi <zboszor@mail.externet.hu> - Reset some bits in the CCRs in cyrix_arr_init() to disable SMM - if ARR3 isn't protected. This is needed because if SMM is active - and ARR3 isn't protected then deleting and setting ARR3 again - may lock up the processor. With SMM entirely disabled, it does - not happen. - 19990812 Zoltán Böszörményi <zboszor@mail.externet.hu> - Rearrange switch() statements so the driver accomodates to - the fact that the AMD Athlon handles its MTRRs the same way - as Intel does. - 19990814 Zoltán Böszörményi <zboszor@mail.externet.hu> - Double check for Intel in mtrr_add()'s big switch() because - that revision check is only valid for Intel CPUs. - 19990819 Alan Cox <alan@redhat.com> - Tested Zoltan's changes on a pre production Athlon - 100% - success. - 19991008 Manfred Spraul <manfreds@colorfullife.com> - replaced spin_lock_reschedule() with a normal semaphore. - v1.36 - 20000221 Richard Gooch <rgooch@atnf.csiro.au> - Compile fix if procfs and devfs not enabled. - Formatting changes. - v1.37 - 20001109 H. Peter Anvin <hpa@zytor.com> - Use the new centralized CPU feature detects. - - v1.38 - 20010309 Dave Jones <davej@suse.de> - Add support for Cyrix III. - - v1.39 - 20010312 Dave Jones <davej@suse.de> - Ugh, I broke AMD support. - Reworked fix by Troels Walsted Hansen <troels@thule.no> - - v1.40 - 20010327 Dave Jones <davej@suse.de> - Adapted Cyrix III support to include VIA C3. - - v2.0 - 20020306 Patrick Mochel <mochel@osdl.org> - Split mtrr.c -> mtrr/*.c - Converted to Linux Kernel Coding Style - Fixed several minor nits in form - Moved some SMP-only functions out, so they can be used - for power management in the future. - TODO: Fix user interface cruft. diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 977ee3adaf2..34ab0daec3a 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -972,7 +972,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node, #endif #ifdef CONFIG_PPC_RTAS - /* To help early debugging via the front panel, we retreive a minimal + /* To help early debugging via the front panel, we retrieve a minimal * set of RTAS infos now if available */ { diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4283fa33f78..ae2e2a31a70 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -632,7 +632,7 @@ void rtas_stop_self(void) } /* - * Call early during boot, before mem init or bootmem, to retreive the RTAS + * Call early during boot, before mem init or bootmem, to retrieve the RTAS * informations from the device-tree and allocate the RMO buffer for userland * accesses. */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 98e9f0595dd..81567e93126 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -438,7 +438,7 @@ void __init setup_system(void) /* * Fill the ppc64_caches & systemcfg structures with informations - * retreived from the device-tree. Need to be called before + * retrieved from the device-tree. Need to be called before * finish_device_tree() since the later requires some of the * informations filled up here to properly parse the interrupt * tree. diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 5bb433cbe41..149351a84b9 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -368,7 +368,7 @@ static unsigned long __init htab_get_table_size(void) unsigned long mem_size, rnd_mem_size, pteg_count; /* If hash size isn't already provided by the platform, we try to - * retreive it from the device-tree. If it's not there neither, we + * retrieve it from the device-tree. If it's not there neither, we * calculate it now based on the total RAM size */ if (ppc64_pft_size == 0) diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index a4b50c4109c..a415e8d2f7a 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -80,7 +80,7 @@ static struct freq_attr* g5_cpu_freqs_attr[] = { }; /* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retreived from the device-tree + * the various frequencies, retrieved from the device-tree */ static u32 *g5_pmode_data; static int g5_pmode_max; diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 46a6ad60a8f..a3fb3376ffa 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,46 +1,67 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Sun Mar 6 20:47:29 2005 +# Linux kernel version: 2.6.15 +# Mon Jan 9 14:36:29 2006 # +CONFIG_SPARC=y +CONFIG_SPARC64=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_TIME_INTERPOLATION=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_SPARC64_PAGE_SIZE_8KB=y +# CONFIG_SPARC64_PAGE_SIZE_64KB is not set +# CONFIG_SPARC64_PAGE_SIZE_512KB is not set +# CONFIG_SPARC64_PAGE_SIZE_4MB is not set +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,20 +73,32 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_SYSVIPC_COMPAT=y # # General machine setup # -CONFIG_BBC_I2C=m -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_SMP=y +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set -CONFIG_NR_CPUS=4 CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=m # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y @@ -75,15 +108,22 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_US3_FREQ=m CONFIG_US2E_FREQ=m -CONFIG_SPARC64=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_GENERIC_ISA_DMA=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y @@ -91,130 +131,142 @@ CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_RTC=y # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_COMPAT=y CONFIG_COMPAT=y -CONFIG_UID16=y CONFIG_BINFMT_ELF32=y # CONFIG_BINFMT_AOUT32 is not set + +# +# Executable file formats +# CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_SOLARIS_EMUL=m +# CONFIG_SOLARIS_EMUL is not set +# CONFIG_CMDLINE_BOOL is not set # -# Parallel port support +# Networking # -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_SUNBPP is not set -# CONFIG_PARPORT_OTHER is not set -CONFIG_PARPORT_1284=y -CONFIG_PRINTER=m -CONFIG_ENVCTRL=m -CONFIG_DISPLAY7SEG=m -# CONFIG_CMDLINE_BOOL is not set +CONFIG_NET=y # -# Generic Driver Options +# Networking options # -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y # -# Graphics support +# TCP congestion control # -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -CONFIG_FB_PM2=y -# CONFIG_FB_PM2_FIFO_DISCONNECT is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_BW2 is not set -# CONFIG_FB_CG3 is not set -CONFIG_FB_CG6=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -CONFIG_FB_ATY=y -CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -# CONFIG_FB_ATY_XL_INIT is not set -CONFIG_FB_ATY_GX=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -CONFIG_FB_SBUS=y -CONFIG_FB_FFB=y -# CONFIG_FB_TCX is not set -# CONFIG_FB_CG14 is not set -# CONFIG_FB_P9100 is not set -# CONFIG_FB_LEO is not set -# CONFIG_FB_PCI is not set -# CONFIG_FB_VIRTUAL is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_NETFILTER is not set # -# Console display driver support +# DCCP Configuration (EXPERIMENTAL) # -# CONFIG_PROM_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -CONFIG_FONT_SUN8x16=y -# CONFIG_FONT_SUN12x22 is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m # -# Logo configuration +# DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_SUN_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_IP_DCCP_CCID3=m +CONFIG_IP_DCCP_TFRC_LIB=m # -# Serial drivers +# DCCP Kernel Hacking # +# CONFIG_IP_DCCP_DEBUG is not set +# CONFIG_IP_DCCP_UNLOAD_HACK is not set # -# Non-8250 serial port support +# SCTP Configuration (EXPERIMENTAL) # -CONFIG_SERIAL_SUNCORE=y -CONFIG_SERIAL_SUNZILOG=y -CONFIG_SERIAL_SUNZILOG_CONSOLE=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_SERIAL_SUNSAB=m -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set # -# Misc Linux/SPARC drivers +# QoS and/or fair queueing # -CONFIG_SUN_OPENPROMIO=m -CONFIG_SUN_MOSTEK_RTC=y -CONFIG_OBP_FLASH=m -# CONFIG_SUN_BPP is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=m # # Memory Technology Devices (MTD) @@ -222,10 +274,18 @@ CONFIG_OBP_FLASH=m # CONFIG_MTD is not set # +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# # Block devices # # CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -234,22 +294,13 @@ CONFIG_OBP_FLASH=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_UB=m # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -265,7 +316,7 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m +# CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set @@ -278,7 +329,7 @@ CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set -CONFIG_BLK_DEV_OPTI621=m +# CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y @@ -286,27 +337,25 @@ CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=m -CONFIG_BLK_DEV_CMD64X=m -CONFIG_BLK_DEV_TRIFLEX=m -CONFIG_BLK_DEV_CY82C693=m -CONFIG_BLK_DEV_CS5520=m -CONFIG_BLK_DEV_CS5530=m -CONFIG_BLK_DEV_HPT34X=m -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=m -CONFIG_BLK_DEV_SC1200=m -CONFIG_BLK_DEV_PIIX=m -CONFIG_BLK_DEV_NS87415=m -CONFIG_BLK_DEV_PDC202XX_OLD=m -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=m -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=m -CONFIG_BLK_DEV_SIIMAGE=m -CONFIG_BLK_DEV_SLC90E66=m -CONFIG_BLK_DEV_TRM290=m -CONFIG_BLK_DEV_VIA82CXXX=m +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -316,6 +365,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -323,11 +373,12 @@ CONFIG_SCSI_PROC_FS=y # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -340,89 +391,42 @@ CONFIG_SCSI_CONSTANTS=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m +CONFIG_ISCSI_TCP=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set -CONFIG_SCSI_SATA=y -CONFIG_SCSI_SATA_AHCI=m -CONFIG_SCSI_SATA_SVW=m -CONFIG_SCSI_ATA_PIIX=m -CONFIG_SCSI_SATA_NV=m -CONFIG_SCSI_SATA_PROMISE=m -CONFIG_SCSI_SATA_QSTOR=m -CONFIG_SCSI_SATA_SX4=m -CONFIG_SCSI_SATA_SIL=m -CONFIG_SCSI_SATA_SIS=m -CONFIG_SCSI_SATA_ULI=m -CONFIG_SCSI_SATA_VIA=m -CONFIG_SCSI_SATA_VITESSE=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_EATA_PIO=m +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=y -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y +# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLOGICPTI=m +# CONFIG_SCSI_QLOGICPTI is not set CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -CONFIG_SCSI_DC395x=m +# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_SUNESP=y - -# -# Fibre Channel support -# -CONFIG_FC4=m - -# -# FC4 drivers -# -CONFIG_FC4_SOC=m -CONFIG_FC4_SOCAL=m - -# -# FC4 targets -# -CONFIG_SCSI_PLUTO=m -CONFIG_SCSI_FCAL=m +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SUNESP is not set # # Multi-device support (RAID and LVM) @@ -442,427 +446,34 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_IEEE1394_OUI_DB=y -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y - -# -# Device Drivers -# -CONFIG_IEEE1394_PCILYNX=m -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=y -CONFIG_INET_ESP=y -CONFIG_INET_IPCOMP=y -CONFIG_INET_TUNNEL=y -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_PHYSDEV=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -CONFIG_IP6_NF_RAW=m - -# -# DECnet: Netfilter Configuration -# -CONFIG_DECNET_NF_GRABULATOR=m - -# -# Bridge: Netfilter Configuration -# -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_ATM_BR2684_IPFILTER=y -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y -CONFIG_DECNET_ROUTE_FWMARK=y -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -# CONFIG_DEV_APPLETALK is not set -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_NET_DIVERT=y -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -# CONFIG_NET_SCH_CLK_JIFFIES is not set -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -CONFIG_NET_SCH_CLK_CPU=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=y -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_NET_CLS_IND=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_PEDIT=m - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -CONFIG_AX25_DAMA_SLAVE=y -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -# CONFIG_BPQETHER is not set -# CONFIG_BAYCOM_SER_FDX is not set -# CONFIG_BAYCOM_SER_HDX is not set -# CONFIG_BAYCOM_PAR is not set -# CONFIG_YAM is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# - -# -# Old SIR device drivers -# - -# -# Old Serial dongle support -# +# CONFIG_IEEE1394 is not set # -# FIR device drivers +# I2O device support # -# CONFIG_USB_IRDA is not set -CONFIG_SIGMATEL_FIR=m -# CONFIG_VLSI_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m +# CONFIG_I2O is not set # -# Bluetooth device drivers +# Network device support # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -# CONFIG_ETHERTAP is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # # ARCnet devices @@ -870,86 +481,73 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m -CONFIG_SUNLANCE=y -CONFIG_HAPPYMEAL=y -CONFIG_SUNBMAC=m -CONFIG_SUNQE=m -CONFIG_SUNGEM=y -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=m -CONFIG_TYPHOON=m +# CONFIG_SUNLANCE is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNBMAC is not set +# CONFIG_SUNQE is not set +# CONFIG_SUNGEM is not set +CONFIG_CASSINI=m +# CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -# CONFIG_DM9102 is not set +# CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y -CONFIG_PCNET32=m +# CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_ADAPTEC_STARFIRE_NAPI=y -CONFIG_B44=m -CONFIG_FORCEDETH=m -CONFIG_DGRS=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -CONFIG_SUNDANCE_MMIO=y -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y -CONFIG_MYRI_SBUS=m -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_R8169_NAPI=y -CONFIG_R8169_VLAN=y -CONFIG_SK98LIN=m -CONFIG_VIA_VELOCITY=m +# CONFIG_MYRI_SBUS is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +CONFIG_BNX2=m # # Ethernet (10000 Mbit) # -CONFIG_IXGB=m -CONFIG_IXGB_NAPI=y -CONFIG_S2IO=m -CONFIG_S2IO_NAPI=y -CONFIG_2BUFF_MODE=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices @@ -959,140 +557,31 @@ CONFIG_2BUFF_MODE=y # # Wireless LAN (non-hamradio) # -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -CONFIG_PRISM54=m -CONFIG_NET_WIRELESS=y +# CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set - -# -# ATM drivers -# -CONFIG_ATM_TCP=m -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -CONFIG_ATM_FORE200E_MAYBE=m -CONFIG_ATM_FORE200E_PCA=y -CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y -CONFIG_ATM_FORE200E_SBA=y -CONFIG_ATM_FORE200E_SBA_DEFAULT_FW=y -CONFIG_ATM_FORE200E_USE_TASKLET=y -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_FORE200E=m -CONFIG_ATM_HE=m -CONFIG_ATM_HE_USE_SUNI=y -CONFIG_FDDI=y -# CONFIG_DEFXX is not set -CONFIG_SKFP=m -CONFIG_HIPPI=y -# CONFIG_ROADRUNNER is not set -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set -CONFIG_NET_FC=y -CONFIG_SHAPER=m -CONFIG_NETCONSOLE=m +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # -CONFIG_ISDN=m - -# -# Old ISDN4Linux -# -# CONFIG_ISDN_I4L is not set - -# -# CAPI subsystem -# -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m - -# -# CAPI hardware drivers -# - -# -# Active AVM cards -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m - -# -# Active Eicon DIVA Server cards -# -CONFIG_CAPI_EICON=y -CONFIG_ISDN_DIVAS=m -CONFIG_ISDN_DIVAS_BRIPCI=y -CONFIG_ISDN_DIVAS_PRIPCI=y -CONFIG_ISDN_DIVAS_DIVACAPI=m -CONFIG_ISDN_DIVAS_USERIDI=m -CONFIG_ISDN_DIVAS_MAINT=m +# CONFIG_ISDN is not set # # Telephony Support # -CONFIG_PHONE=m -CONFIG_PHONE_IXJ=m - -# -# Unix98 PTY support -# -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# XFree86 DRI support -# -CONFIG_DRM=y -CONFIG_DRM_TDFX=m -# CONFIG_DRM_R128 is not set +# CONFIG_PHONE is not set # # Input device support @@ -1112,26 +601,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -CONFIG_GAMEPORT=m -CONFIG_SOUND_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set -# CONFIG_GAMEPORT_FM801 is not set -CONFIG_GAMEPORT_CS461X=m -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -1143,7 +612,7 @@ CONFIG_KEYBOARD_LKKBD=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=y -CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y @@ -1151,406 +620,250 @@ CONFIG_INPUT_SPARCSPKR=y # CONFIG_INPUT_UINPUT is not set # -# I2C support +# Hardware I/O ports # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_PCIPS2=m +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +# CONFIG_GAMEPORT is not set # -# I2C Algorithms +# Character devices # -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=m -CONFIG_I2C_ALGOPCA=m +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set # -# I2C Hardware Bus support +# Serial drivers # -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -# CONFIG_I2C_AMD756_S4882 is not set -CONFIG_I2C_AMD8111=m -CONFIG_I2C_I801=m -CONFIG_I2C_I810=m -CONFIG_I2C_ISA=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_PROSAVAGE=m -CONFIG_I2C_SAVAGE4=m -CONFIG_SCx200_ACB=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_STUB=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m -CONFIG_I2C_VOODOO3=m -CONFIG_I2C_PCA_ISA=m - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83627HF=m - -# -# Other I2C Chip support -# -CONFIG_SENSORS_EEPROM=m -CONFIG_SENSORS_PCF8574=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_RTC8564=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# File systems +# Non-8250 serial port support # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y +CONFIG_SERIAL_SUNCORE=y +# CONFIG_SERIAL_SUNZILOG is not set +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_SERIAL_SUNSAB=m +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set # -# XFS support +# IPMI # -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -CONFIG_XFS_QUOTA=y -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -# CONFIG_QUOTA is not set -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m +# CONFIG_IPMI_HANDLER is not set # -# CD-ROM/DVD Filesystems +# Watchdog Cards # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y +# CONFIG_WATCHDOG is not set +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # -# DOS/FAT/NT Filesystems +# Ftape, the floppy tape device driver # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set # -# Pseudo filesystems +# TPM devices # -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # -# Miscellaneous filesystems +# I2C support # -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=m -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_UFS_FS_WRITE=y +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set # -# Network File Systems +# I2C Algorithms # -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set -CONFIG_AFS_FS=m -CONFIG_RXRPC=m +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# Partition Types +# I2C Hardware Bus support # -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_SUN_PARTITION=y +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # -# Native Language Support +# Dallas's 1-wire bus # -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m +# CONFIG_W1 is not set # -# Multimedia devices +# Hardware Monitoring support # -CONFIG_VIDEO_DEV=y +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Video For Linux +# Misc devices # # -# Video Adapters +# Multimedia Capabilities Port drivers # -CONFIG_VIDEO_BT848=m -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_W9966=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_PP=m -CONFIG_VIDEO_CPIA_USB=m -CONFIG_VIDEO_SAA5246A=m -CONFIG_VIDEO_SAA5249=m -CONFIG_TUNER_3036=m -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_SAA7134 is not set -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DPC=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_OVCAMCHIP=m # -# Radio Adapters +# Multimedia devices # -CONFIG_RADIO_GEMTEK_PCI=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_MAESTRO=m +# CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # -CONFIG_DVB=y -CONFIG_DVB_CORE=m - -# -# Supported SAA7146 based PCI Adapters -# -CONFIG_DVB_AV7110=m -# CONFIG_DVB_AV7110_OSD is not set -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m - -# -# Supported USB Adapters -# -# CONFIG_DVB_TTUSB_BUDGET is not set -CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_DIBUSB=m -# CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES is not set -CONFIG_DVB_DIBCOM_DEBUG=y -CONFIG_DVB_CINERGYT2=m -# CONFIG_DVB_CINERGYT2_TUNING is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -CONFIG_DVB_B2C2_SKYSTAR=m -CONFIG_DVB_B2C2_USB=m +# CONFIG_DVB is not set # -# Supported BT878 Adapters -# -CONFIG_DVB_BT8XX=m - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_STV0299=m -CONFIG_DVB_CX24110=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA80XX=m -CONFIG_DVB_MT312=m -CONFIG_DVB_VES1X93=m - -# -# DVB-T (terrestrial) frontends +# Graphics support # -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_SBUS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_PCI is not set +# CONFIG_FB_VIRTUAL is not set # -# DVB-C (cable) frontends +# Console display driver support # -CONFIG_DVB_ATMEL_AT76C651=m -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_STV0297=m +# CONFIG_PROM_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_SUN8x16=y +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # -# ATSC (North American/Korean Terresterial DTV) frontends +# Logo configuration # -CONFIG_DVB_NXT2002=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_VIDEO_VIDEOBUF=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_BUF=m -CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m -CONFIG_VIDEO_TVEEPROM=m +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_SUN_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -1563,7 +876,6 @@ CONFIG_SOUND=m CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m @@ -1571,8 +883,9 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_BIT32_EMUL=m # CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -1580,59 +893,58 @@ CONFIG_SND_BIT32_EMUL=m # Generic devices # CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m -# CONFIG_SND_MTPAV is not set +CONFIG_SND_MTPAV=m # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # -CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_AD1889 is not set CONFIG_SND_ALI5451=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AZT3328=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CS46XX=m -# CONFIG_SND_CS46XX_NEW_DSP is not set -CONFIG_SND_CS4281=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1X=m -CONFIG_SND_CA0106=m -CONFIG_SND_KORG1212=m -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -CONFIG_SND_TRIDENT=m -CONFIG_SND_YMFPCI=m -CONFIG_SND_ALS4000=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X=m -CONFIG_SND_ICE1712=m -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_SONICVIBES=m +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VX222=m +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -1642,12 +954,20 @@ CONFIG_SND_VX222=m # # ALSA Sparc devices # -CONFIG_SND_SUN_AMD7930=m +# CONFIG_SND_SUN_AMD7930 is not set CONFIG_SND_SUN_CS4231=m +# CONFIG_SND_SUN_DBRI is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1658,8 +978,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -1667,36 +985,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m -CONFIG_USB_SL811_HCD=m +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_MIDI is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y -# CONFIG_USB_STORAGE_DATAFAB is not set -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices @@ -1706,135 +1017,75 @@ CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set -CONFIG_USB_WACOM=m -CONFIG_USB_KBTAB=m +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -CONFIG_USB_MTOUCH=m -CONFIG_USB_EGALAX=m +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set -CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -CONFIG_USB_SN9C102=m -# CONFIG_USB_STV680 is not set -CONFIG_USB_W9968CF=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y # -# Intelligent USB Devices/Gadgets +# Video4Linux support is needed for USB Multimedia device support # -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y # # USB Network Adapters # -CONFIG_USB_AX8817X=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers # -CONFIG_USB_USS720=m # # USB Serial Converter support # -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_VISOR is not set -CONFIG_USB_SERIAL_IPAQ=m -# CONFIG_USB_SERIAL_IR is not set -CONFIG_USB_SERIAL_EDGEPORT=m -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y +# CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_TEST=m +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m # # USB Gadget Support @@ -1842,50 +1093,185 @@ CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# # InfiniBand support # -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND is not set # -# Watchdog Cards +# SN Devices +# + +# +# Misc Linux/SPARC drivers +# +CONFIG_SUN_OPENPROMIO=m +CONFIG_SUN_MOSTEK_RTC=y +# CONFIG_OBP_FLASH is not set +# CONFIG_SUN_BPP is not set +# CONFIG_BBC_I2C is not set +# CONFIG_ENVCTRL is not set +# CONFIG_DISPLAY7SEG is not set + +# +# Fibre Channel support +# +# CONFIG_FC4 is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + # -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set # -# Watchdog Device Drivers +# DOS/FAT/NT Filesystems # -CONFIG_SOFT_WATCHDOG=m -CONFIG_WATCHDOG_CP1XXX=m -CONFIG_WATCHDOG_RIO=m +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set # -# PCI-based Watchdog Cards +# Pseudo filesystems # -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # -# USB-based Watchdog Cards +# Miscellaneous filesystems # -CONFIG_USBPCWATCHDOG=m +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set # -# Profiling support +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_SUN_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=m +CONFIG_KPROBES=y # # Kernel hacking # +CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1894,12 +1280,13 @@ CONFIG_SCHEDSTATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_KPROBES=y # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_BOOTMEM is not set -CONFIG_HAVE_DEC_LOCK=y +# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -1945,6 +1332,7 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +CONFIG_CRC16=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 11a848402fb..71000299188 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1657,13 +1657,10 @@ ret_sys_call: /* Check if force_successful_syscall_return() * was invoked. */ - ldub [%curptr + TI_SYS_NOERROR], %l0 - brz,pt %l0, 1f - nop - ba,pt %xcc, 80f + ldub [%curptr + TI_SYS_NOERROR], %l2 + brnz,a,pn %l2, 80f stb %g0, [%curptr + TI_SYS_NOERROR] -1: cmp %o0, -ERESTART_RESTARTBLOCK bgeu,pn %xcc, 1f andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %l6 diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c index 9e8362ea310..30bcaf58e3a 100644 --- a/arch/sparc64/kernel/power.c +++ b/arch/sparc64/kernel/power.c @@ -14,6 +14,7 @@ #include <linux/signal.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/pm.h> #include <asm/system.h> #include <asm/ebus.h> @@ -70,6 +71,9 @@ void machine_power_off(void) machine_halt(); } +void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL(pm_power_off); + #ifdef CONFIG_PCI static int powerd(void *__unused) { diff --git a/arch/x86_64/crypto/aes.c b/arch/x86_64/crypto/aes.c index acfdaa28791..fb1b961a2e2 100644 --- a/arch/x86_64/crypto/aes.c +++ b/arch/x86_64/crypto/aes.c @@ -74,8 +74,6 @@ static inline u8 byte(const u32 x, const unsigned n) return x >> (n << 3); } -#define u32_in(x) le32_to_cpu(*(const __le32 *)(x)) - struct aes_ctx { u32 key_length; @@ -234,6 +232,7 @@ static int aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags) { struct aes_ctx *ctx = ctx_arg; + const __le32 *key = (const __le32 *)in_key; u32 i, j, t, u, v, w; if (key_len != 16 && key_len != 24 && key_len != 32) { @@ -243,10 +242,10 @@ static int aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, ctx->key_length = key_len; - D_KEY[key_len + 24] = E_KEY[0] = u32_in(in_key); - D_KEY[key_len + 25] = E_KEY[1] = u32_in(in_key + 4); - D_KEY[key_len + 26] = E_KEY[2] = u32_in(in_key + 8); - D_KEY[key_len + 27] = E_KEY[3] = u32_in(in_key + 12); + D_KEY[key_len + 24] = E_KEY[0] = le32_to_cpu(key[0]); + D_KEY[key_len + 25] = E_KEY[1] = le32_to_cpu(key[1]); + D_KEY[key_len + 26] = E_KEY[2] = le32_to_cpu(key[2]); + D_KEY[key_len + 27] = E_KEY[3] = le32_to_cpu(key[3]); switch (key_len) { case 16: @@ -256,17 +255,17 @@ static int aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, break; case 24: - E_KEY[4] = u32_in(in_key + 16); - t = E_KEY[5] = u32_in(in_key + 20); + E_KEY[4] = le32_to_cpu(key[4]); + t = E_KEY[5] = le32_to_cpu(key[5]); for (i = 0; i < 8; ++i) loop6 (i); break; case 32: - E_KEY[4] = u32_in(in_key + 16); - E_KEY[5] = u32_in(in_key + 20); - E_KEY[6] = u32_in(in_key + 24); - t = E_KEY[7] = u32_in(in_key + 28); + E_KEY[4] = le32_to_cpu(key[4]); + E_KEY[5] = le32_to_cpu(key[5]); + E_KEY[6] = le32_to_cpu(key[6]); + t = E_KEY[7] = le32_to_cpu(key[7]); for (i = 0; i < 7; ++i) loop8(i); break; @@ -290,6 +289,8 @@ extern void aes_decrypt(void *ctx_arg, u8 *out, const u8 *in); static struct crypto_alg aes_alg = { .cra_name = "aes", + .cra_driver_name = "aes-x86_64", + .cra_priority = 200, .cra_flags = CRYPTO_ALG_TYPE_CIPHER, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct aes_ctx), diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index cb6e38ed2b1..937d81f62f4 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -201,7 +201,7 @@ again: if ((signed long)(get_ccount() - next) > 0) goto again; - /* Allow platform to do something usefull (Wdog). */ + /* Allow platform to do something useful (Wdog). */ platform_heartbeat(); |