diff options
Diffstat (limited to 'arch')
97 files changed, 817 insertions, 1550 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a0cdaafa115..a7e9fea978a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1040,6 +1040,8 @@ source "drivers/power/Kconfig" source "drivers/hwmon/Kconfig" +source "drivers/watchdog/Kconfig" + source "drivers/ssb/Kconfig" #source "drivers/l3/Kconfig" diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c index bd5184fe177..ca9c5b61283 100644 --- a/arch/arm/mach-netx/xc.c +++ b/arch/arm/mach-netx/xc.c @@ -190,15 +190,15 @@ struct xc *request_xc(int xcno, struct device *dev) goto exit; if (!request_mem_region - (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(dev->kobj))) + (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj))) goto exit_free; if (!request_mem_region - (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(dev->kobj))) + (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj))) goto exit_release_1; if (!request_mem_region - (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(dev->kobj))) + (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj))) goto exit_release_2; x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno)); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index a2d45d742ce..fbfa1920353 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -68,6 +68,7 @@ pxa_ost0_interrupt(int irq, void *dev_id) if (c->mode == CLOCK_EVT_MODE_ONESHOT) { /* Disarm the compare/match, signal the event. */ OIER &= ~OIER_E0; + OSSR = OSSR_M0; c->event_handler(c); } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { /* Call the event handler as many times as necessary @@ -100,9 +101,9 @@ pxa_ost0_interrupt(int irq, void *dev_id) * anything that might put us "very close". */ #define MIN_OSCR_DELTA 16 - do { + do { OSSR = OSSR_M0; - next_match = (OSMR0 += LATCH); + next_match = (OSMR0 += LATCH); c->event_handler(c); } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) && (c->mode == CLOCK_EVT_MODE_PERIODIC)); @@ -114,14 +115,16 @@ pxa_ost0_interrupt(int irq, void *dev_id) static int pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long irqflags; + unsigned long flags, next, oscr; - raw_local_irq_save(irqflags); - OSMR0 = OSCR + delta; - OSSR = OSSR_M0; + raw_local_irq_save(flags); OIER |= OIER_E0; - raw_local_irq_restore(irqflags); - return 0; + next = OSCR + delta; + OSMR0 = next; + oscr = OSCR; + raw_local_irq_restore(flags); + + return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } static void @@ -132,15 +135,16 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) switch (mode) { case CLOCK_EVT_MODE_PERIODIC: raw_local_irq_save(irqflags); - OSMR0 = OSCR + LATCH; OSSR = OSSR_M0; OIER |= OIER_E0; + OSMR0 = OSCR + LATCH; raw_local_irq_restore(irqflags); break; case CLOCK_EVT_MODE_ONESHOT: raw_local_irq_save(irqflags); OIER &= ~OIER_E0; + OSSR = OSSR_M0; raw_local_irq_restore(irqflags); break; @@ -149,6 +153,7 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) /* initializing, released, or preparing for suspend */ raw_local_irq_save(irqflags); OIER &= ~OIER_E0; + OSSR = OSSR_M0; raw_local_irq_restore(irqflags); break; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 4493bcff517..ee40c1a0b83 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -171,7 +171,7 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, * Called from map_io. We need to call to this early enough so that we * can reserve the fixed SDRAM regions before VM could get hold of them. */ -void omapfb_reserve_sdram(void) +void __init omapfb_reserve_sdram(void) { struct bootmem_data *bdata; unsigned long sdram_start, sdram_size; diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 4103c2c487f..b841ecfd5d5 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -197,7 +197,7 @@ void __init mem_init(void) /* * free the memory that was only required for initialisation */ -void __init free_initmem(void) +void free_initmem(void) { #if defined(CONFIG_RAMKERNEL) && !defined(CONFIG_PROTECT_KERNEL) unsigned long start, end, addr; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index fa681f5343f..754fa3960f8 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -122,7 +122,9 @@ device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; - interrupts = <9 4 f 4>; + interrupts = < + f 4 /* Ethernet */ + 9 4 /* Ethernet Wake Up */>; local-mac-address = [000000000000]; /* Filled in by zImage */ reg = <ef600800 70>; mal-device = <&MAL>; diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 39b27e5ef6c..31147a03772 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -21,6 +21,14 @@ # (default ./arch/powerpc/boot) # -W dir specify working directory for temporary files (default .) +# Stop execution if any command fails +set -e + +# Allow for verbose output +if [ "$V" = 1 ]; then + set -x +fi + # defaults kernel= ofile=zImage @@ -111,7 +119,7 @@ if [ -n "$dts" ]; then if [ -z "$dtb" ]; then dtb="$platform.dtb" fi - dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1 + dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" fi if [ -z "$kernel" ]; then @@ -149,7 +157,6 @@ cuboot*) ps3) platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o" lds=$object/zImage.ps3.lds - binary=y gzip= ext=bin objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data" @@ -233,7 +240,7 @@ entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3` if [ -n "$binary" ]; then mv "$ofile" "$ofile".elf - ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin + ${CROSS}objcopy -O binary "$ofile".elf "$ofile" fi # post-processing needed for some platforms @@ -246,9 +253,9 @@ coff) $object/hack-coff "$ofile" ;; cuboot*) - gzip -f -9 "$ofile".bin + gzip -f -9 "$ofile" mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ - $uboot_version -d "$ofile".bin.gz "$ofile" + $uboot_version -d "$ofile".gz "$ofile" ;; treeboot*) mv "$ofile" "$ofile.elf" @@ -269,11 +276,11 @@ ps3) # then copied to offset 0x100. At runtime the bootwrapper program # copies the 0x100 bytes at __system_reset_kernel to addr 0x100. - system_reset_overlay=0x`${CROSS}nm "$ofile".elf \ + system_reset_overlay=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_overlay$' \ | cut -d' ' -f1` system_reset_overlay=`printf "%d" $system_reset_overlay` - system_reset_kernel=0x`${CROSS}nm "$ofile".elf \ + system_reset_kernel=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_kernel$' \ | cut -d' ' -f1` system_reset_kernel=`printf "%d" $system_reset_kernel` @@ -282,23 +289,15 @@ ps3) rm -f "$object/otheros.bld" - msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ - skip=$overlay_dest seek=$system_reset_kernel \ - count=$overlay_size bs=1 2>&1) + ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" - if [ $? -ne "0" ]; then - echo $msg - exit 1 - fi - - msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ - skip=$system_reset_overlay seek=$overlay_dest \ - count=$overlay_size bs=1 2>&1) + dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$overlay_dest seek=$system_reset_kernel \ + count=$overlay_size bs=1 - if [ $? -ne "0" ]; then - echo $msg - exit 2 - fi + dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$system_reset_overlay seek=$overlay_dest \ + count=$overlay_size bs=1 gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld" ;; diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 1ccf3ed7693..78c968aade4 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Aug 30 16:40:47 2007 +# Linux kernel version: 2.6.24-rc2 +# Tue Nov 6 23:23:50 2007 # CONFIG_PPC64=y @@ -10,6 +10,7 @@ CONFIG_PPC64=y # CONFIG_POWER4_ONLY=y CONFIG_POWER4=y +# CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -18,8 +19,13 @@ CONFIG_PPC_MM_SLICES=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y +CONFIG_WORD_SIZE=64 CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -65,7 +71,10 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CPUSETS is not set +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -86,7 +95,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -107,14 +115,15 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -125,7 +134,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_EMBEDDED6xx is not set # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set @@ -141,6 +149,7 @@ CONFIG_PPC_PASEMI=y # PA Semi PWRficient options # CONFIG_PPC_PASEMI_IOMMU=y +# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set CONFIG_PPC_PASEMI_MDIO=y CONFIG_ELECTRA_IDE=y # CONFIG_PPC_CELLEB is not set @@ -156,29 +165,52 @@ CONFIG_MPIC=y # CONFIG_U3_DART is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_REGREAD=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPU Frequency drivers +# +CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # -CONFIG_HZ_100=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_IOMMU_VMERGE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set @@ -196,12 +228,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -# CONFIG_PPC_HAS_HASH_64K is not set -# CONFIG_PPC_64K_PAGES is not set +CONFIG_PPC_HAS_HASH_64K=y +CONFIG_PPC_64K_PAGES=y # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -222,11 +255,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -240,6 +270,7 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set +# CONFIG_ELECTRA_CF is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_KERNEL_START=0xc000000000000000 @@ -255,7 +286,7 @@ CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=y @@ -281,6 +312,7 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -306,10 +338,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -338,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -361,6 +390,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -385,6 +415,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -402,7 +433,15 @@ CONFIG_MTD_PHRAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # @@ -455,10 +494,42 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# # CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # @@ -498,10 +569,11 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -CONFIG_SCSI_3W_9XXX=y +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -574,9 +646,10 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PCMCIA is not set +CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -589,41 +662,13 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# -CONFIG_IEEE1394_PCILYNX=y -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -CONFIG_IEEE1394_SBP2=y -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y @@ -633,6 +678,8 @@ CONFIG_DUMMY=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -649,6 +696,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -657,13 +705,16 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -682,6 +733,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -689,6 +741,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -697,12 +750,15 @@ CONFIG_TIGON3=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -749,7 +805,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -810,15 +865,12 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=4 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_PASEMI=y CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -896,8 +948,6 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -905,12 +955,12 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -946,6 +996,13 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -963,14 +1020,14 @@ CONFIG_DAB=y # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +CONFIG_DRM_RADEON=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=y # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y @@ -979,6 +1036,7 @@ CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -1026,6 +1084,15 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_PM3 is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -1178,6 +1245,7 @@ CONFIG_SND_USB_USX2Y=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1328,6 +1396,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1357,19 +1426,6 @@ CONFIG_RTC_DRV_DS1307=y # # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# # Userspace I/O # # CONFIG_UIO is not set @@ -1388,7 +1444,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1436,7 +1491,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # @@ -1449,30 +1503,43 @@ CONFIG_CONFIGFS_FS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -1501,10 +1568,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1545,10 +1608,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # CONFIG_UCC_SLOW is not set @@ -1561,23 +1620,24 @@ CONFIG_CRC_CCITT=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1586,7 +1646,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1601,9 +1661,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1620,6 +1683,7 @@ CONFIG_XMON_DISASSEMBLY=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -1628,34 +1692,38 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set +CONFIG_CRYPTO_BLOWFISH=y # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_HW is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 05582af50c5..3e90c835fe1 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Aug 30 16:47:09 2007 +# Linux kernel version: 2.6.24-rc2 +# Tue Nov 6 23:43:56 2007 # CONFIG_PPC64=y @@ -11,6 +11,7 @@ CONFIG_PPC64=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y CONFIG_POWER4=y +# CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -19,8 +20,13 @@ CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 CONFIG_64BIT=y +CONFIG_WORD_SIZE=64 CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -72,8 +78,15 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_CPUACCT is not set CONFIG_CPUSETS=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -93,7 +106,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -114,6 +126,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -132,7 +145,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_EMBEDDED6xx is not set # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set @@ -155,7 +167,15 @@ CONFIG_VIOPATH=y CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -# CONFIG_PPC_PASEMI is not set +CONFIG_PPC_PASEMI=y + +# +# PA Semi PWRficient options +# +CONFIG_PPC_PASEMI_IOMMU=y +# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set +CONFIG_PPC_PASEMI_MDIO=y +CONFIG_ELECTRA_IDE=y CONFIG_PPC_CELLEB=y # CONFIG_PPC_PS3 is not set CONFIG_PPC_CELL=y @@ -188,6 +208,7 @@ CONFIG_RTAS_FLASH=m CONFIG_PPC_PMI=m CONFIG_MMIO_NVRAM=y CONFIG_MPIC_U3_HT_IRQS=y +CONFIG_MPIC_BROKEN_REGREAD=y CONFIG_IBMVIO=y # CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set @@ -201,6 +222,8 @@ CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -211,6 +234,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CPU Frequency drivers # CONFIG_CPU_FREQ_PMAC64=y +CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_CPM2 is not set CONFIG_AXON_RAM=m # CONFIG_FSL_ULI1575 is not set @@ -254,6 +278,8 @@ CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_SPLIT_PTLOCK_CPUS=4 @@ -268,6 +294,7 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SUSPEND_SMP_POSSIBLE=y +CONFIG_HIBERNATION_SMP_POSSIBLE=y CONFIG_SECCOMP=y # CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y @@ -284,12 +311,22 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y # -# PCCARD (PCMCIA/CardBus) support +# PC-card bridges # -# CONFIG_PCCARD is not set +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_ELECTRA_CF=y CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_CPCI is not set @@ -319,7 +356,10 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=y # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -333,6 +373,7 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -404,6 +445,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -465,10 +507,6 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -498,6 +536,7 @@ CONFIG_NET_CLS_ROUTE=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -539,6 +578,8 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -550,6 +591,11 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y @@ -557,8 +603,6 @@ CONFIG_IDEPCI_PCIBUS_ORDER=y CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y @@ -590,7 +634,7 @@ CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # @@ -631,6 +675,7 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_SRP_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set @@ -671,19 +716,20 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y CONFIG_ATA_NONSTANDARD=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SVW=y # CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_MV=y # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -713,8 +759,10 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -725,6 +773,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=y +CONFIG_PATA_PLATFORM=y CONFIG_PATA_SCC=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -745,15 +794,10 @@ CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -800,13 +844,15 @@ CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_PHY=y # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set @@ -818,6 +864,9 @@ CONFIG_BROADCOM_PHY=m CONFIG_FIXED_PHY=m CONFIG_FIXED_MII_10_FDX=y CONFIG_FIXED_MII_100_FDX=y +# CONFIG_FIXED_MII_1000_FDX is not set +CONFIG_FIXED_MII_AMNT=1 +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -829,6 +878,11 @@ CONFIG_VORTEX=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBMVETH=m +# CONFIG_IBM_NEW_EMAC is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_PCNET32_NAPI is not set @@ -836,7 +890,6 @@ CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -856,6 +909,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -863,6 +917,7 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -872,13 +927,16 @@ CONFIG_SPIDER_NET=m CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -CONFIG_PASEMI_MAC=m +# CONFIG_NIU is not set +CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set CONFIG_TR=y CONFIG_IBMOL=y # CONFIG_3C359 is not set @@ -899,6 +957,7 @@ CONFIG_IBMOL=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set CONFIG_ISERIES_VETH=m # CONFIG_FDDI is not set @@ -918,6 +977,7 @@ CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y @@ -939,7 +999,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -1002,6 +1061,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -1029,14 +1089,18 @@ CONFIG_HVC_RTAS=y CONFIG_HVC_BEAT=y CONFIG_HVCS=m # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set @@ -1068,6 +1132,7 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_PASEMI=y # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set @@ -1106,6 +1171,13 @@ CONFIG_I2C_POWERMAC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -1122,18 +1194,8 @@ CONFIG_I2C_POWERMAC=y # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -1142,6 +1204,7 @@ CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -1192,6 +1255,19 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_PM3 is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# # # Console display driver support @@ -1333,6 +1409,12 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m # CONFIG_SND_USB_CAIAQ is not set # +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# # System on Chip audio support # # CONFIG_SND_SOC is not set @@ -1348,6 +1430,7 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1489,19 +1572,53 @@ CONFIG_EDAC=y # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y -# CONFIG_RTC_CLASS is not set +CONFIG_EDAC_PASEMI=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# DMA Engine support +# SPI RTC drivers # -# CONFIG_DMA_ENGINE is not set # -# DMA Clients +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Devices +# on-CPU RTC drivers # # @@ -1585,7 +1702,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1604,10 +1720,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y @@ -1619,6 +1732,7 @@ CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1626,6 +1740,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_XPRT_RDMA=m # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m @@ -1662,10 +1777,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1706,10 +1817,6 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # CONFIG_UCC_SLOW is not set @@ -1733,18 +1840,17 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1768,9 +1874,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set @@ -1780,6 +1889,7 @@ CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1788,6 +1898,7 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1812,6 +1923,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1826,9 +1938,12 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index d3fb7d0c6c1..9ed351f3c96 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1104,6 +1104,16 @@ static struct cpu_spec __initdata cpu_specs[] = { { .pvr_mask = 0xf0000fff, .pvr_value = 0x40000850, + .cpu_name = "440GR Rev. A", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE, + .icache_bsize = 32, + .dcache_bsize = 32, + .platform = "ppc440", + }, + { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */ + .pvr_mask = 0xf0000fff, + .pvr_value = 0x40000858, .cpu_name = "440EP Rev. A", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, @@ -1115,28 +1125,27 @@ static struct cpu_spec __initdata cpu_specs[] = { { .pvr_mask = 0xf0000fff, .pvr_value = 0x400008d3, - .cpu_name = "440EP Rev. B", + .cpu_name = "440GR Rev. B", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .icache_bsize = 32, .dcache_bsize = 32, - .cpu_setup = __setup_cpu_440ep, .platform = "ppc440", }, - { /* 440EPX */ - .pvr_mask = 0xf0000ffb, - .pvr_value = 0x200008D0, - .cpu_name = "440EPX", + { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */ + .pvr_mask = 0xf0000fff, + .pvr_value = 0x400008db, + .cpu_name = "440EP Rev. B", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .icache_bsize = 32, .dcache_bsize = 32, - .cpu_setup = __setup_cpu_440epx, + .cpu_setup = __setup_cpu_440ep, .platform = "ppc440", }, { /* 440GRX */ .pvr_mask = 0xf0000ffb, - .pvr_value = 0x200008D8, + .pvr_value = 0x200008D0, .cpu_name = "440GRX", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE, @@ -1145,6 +1154,17 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_440grx, .platform = "ppc440", }, + { /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */ + .pvr_mask = 0xf0000ffb, + .pvr_value = 0x200008D8, + .cpu_name = "440EPX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440epx, + .platform = "ppc440", + }, { /* 440GP Rev. B */ .pvr_mask = 0xf0000fff, .pvr_value = 0x40000440, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 21d889e63e8..a7572cf464b 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -244,6 +244,13 @@ syscall_exit_cont: andis. r10,r0,DBCR0_IC@h bnel- load_dbcr0 #endif +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + bne- 2f +1: +#endif /* CONFIG_44x */ stwcx. r0,0,r1 /* to clear the reservation */ lwz r4,_LINK(r1) lwz r5,_CCR(r1) @@ -258,6 +265,12 @@ syscall_exit_cont: mtspr SPRN_SRR1,r8 SYNC RFI +#ifdef CONFIG_44x +2: li r7,0 + iccci r0,r0 + stw r7,icache_44x_need_flush@l(r4) + b 1b +#endif /* CONFIG_44x */ 66: li r3,-ENOSYS b ret_from_syscall @@ -683,6 +696,16 @@ resume_kernel: /* interrupts are hard-disabled at this point */ restore: +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + beq+ 1f + li r6,0 + iccci r0,r0 + stw r6,icache_44x_need_flush@l(r4) +1: +#endif /* CONFIG_44x */ lwz r0,GPR0(r1) lwz r2,GPR2(r1) REST_4GPRS(3, r1) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 97c5857faf0..c34986835a4 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -904,7 +904,7 @@ handle_page_fault: */ 12: bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) + ld r4,_DAR(r1) bl .low_hash_fault b .ret_from_except diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index abd2957fe53..c3cf0e8f3ac 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -122,7 +122,7 @@ static ctl_table powersave_nap_sysctl_root[] = { { .ctl_name = CTL_KERN, .procname = "kernel", - .mode = 0755, + .mode = 0555, .child = powersave_nap_ctl_table, }, {} diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 8533de50347..8b642ab26d3 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -288,7 +288,16 @@ _GLOBAL(_tlbia) */ _GLOBAL(_tlbie) #if defined(CONFIG_40x) + /* We run the search with interrupts disabled because we have to change + * the PID and I don't want to preempt when that happens. + */ + mfmsr r5 + mfspr r6,SPRN_PID + wrteei 0 + mtspr SPRN_PID,r4 tlbsx. r3, 0, r3 + mtspr SPRN_PID,r6 + wrtee r5 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear. @@ -297,23 +306,23 @@ _GLOBAL(_tlbie) tlbwe r3, r3, TLB_TAG isync 10: + #elif defined(CONFIG_44x) - mfspr r4,SPRN_MMUCR - mfspr r5,SPRN_PID /* Get PID */ - rlwimi r4,r5,0,24,31 /* Set TID */ + mfspr r5,SPRN_MMUCR + rlwimi r5,r4,0,24,31 /* Set TID */ /* We have to run the search with interrupts disabled, even critical * and debug interrupts (in fact the only critical exceptions we have * are debug and machine check). Otherwise an interrupt which causes * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */ - mfmsr r5 + mfmsr r4 lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l - andc r6,r5,r6 + andc r6,r4,r6 mtmsr r6 - mtspr SPRN_MMUCR,r4 + mtspr SPRN_MMUCR,r5 tlbsx. r3, 0, r3 - mtmsr r5 + mtmsr r4 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, @@ -534,12 +543,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 0b sync +#ifndef CONFIG_44x + /* We don't flush the icache on 44x. Those have a virtual icache + * and we don't have access to the virtual address here (it's + * not the page vaddr but where it's mapped in user space). The + * flushing of the icache on these is handled elsewhere, when + * a change in the address space occurs, before returning to + * user space + */ mtctr r4 1: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 1b sync isync +#endif /* CONFIG_44x */ blr /* diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index b9d88374f14..41e13f4cc6e 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -350,7 +350,7 @@ struct task_struct *__switch_to(struct task_struct *prev, local_irq_save(flags); account_system_vtime(current); - account_process_vtime(current); + account_process_tick(current, 0); calculate_steal_time(); last = _switch(old_thread, new_thread); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 9f329a8928e..acc0d247d3c 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -697,6 +697,18 @@ static int __init early_init_dt_scan_cpus(unsigned long node, prop = of_get_flat_dt_prop(node, "cpu-version", NULL); if (prop && (*prop & 0xff000000) == 0x0f000000) identify_cpu(0, *prop); +#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU) + /* + * Since 440GR(x)/440EP(x) processors have the same pvr, + * we check the node path and set bit 28 in the cur_cpu_spec + * pvr for EP(x) processor version. This bit is always 0 in + * the "real" pvr. Then we call identify_cpu again with + * the new logical pvr to enable FPU support. + */ + if (strstr(uname, "440EP")) { + identify_cpu(0, cur_cpu_spec->pvr_value | 0x8); + } +#endif } check_cpu_feature_properties(node); diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1db10f70ae6..1add6efdb31 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1244,7 +1244,7 @@ static void __init prom_initialize_tce_table(void) local_alloc_bottom = base; /* It seems OF doesn't null-terminate the path :-( */ - memset(path, 0, sizeof(path)); + memset(path, 0, PROM_SCRATCH_SIZE); /* Call OF to setup the TCE hardware */ if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) { diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ede77dbbd4d..3b1529c103e 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -291,23 +291,16 @@ static void __init initialize_cache_info(void) if ( num_cpus == 1 ) { const u32 *sizep, *lsizep; u32 size, lsize; - const char *dc, *ic; - - /* Then read cache informations */ - if (machine_is(powermac)) { - dc = "d-cache-block-size"; - ic = "i-cache-block-size"; - } else { - dc = "d-cache-line-size"; - ic = "i-cache-line-size"; - } size = 0; lsize = cur_cpu_spec->dcache_bsize; sizep = of_get_property(np, "d-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = of_get_property(np, dc, NULL); + lsizep = of_get_property(np, "d-cache-block-size", NULL); + /* fallback if block size missing */ + if (lsizep == NULL) + lsizep = of_get_property(np, "d-cache-line-size", NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) @@ -324,7 +317,9 @@ static void __init initialize_cache_info(void) sizep = of_get_property(np, "i-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = of_get_property(np, ic, NULL); + lsizep = of_get_property(np, "i-cache-block-size", NULL); + if (lsizep == NULL) + lsizep = of_get_property(np, "i-cache-line-size", NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S index 69e8f86aa4f..77fc76607ab 100644 --- a/arch/powerpc/kernel/swsusp_32.S +++ b/arch/powerpc/kernel/swsusp_32.S @@ -133,10 +133,12 @@ _GLOBAL(swsusp_arch_suspend) /* Resume code */ _GLOBAL(swsusp_arch_resume) +#ifdef CONFIG_ALTIVEC /* Stop pending alitvec streams and memory accesses */ BEGIN_FTR_SECTION DSSALL END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif sync /* Disable MSR:DR to make sure we don't take a TLB or diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 9eb3284deac..4beb6329dfb 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -259,7 +259,7 @@ void account_system_vtime(struct task_struct *tsk) * user and system time records. * Must be called with interrupts disabled. */ -void account_process_vtime(struct task_struct *tsk) +void account_process_tick(struct task_struct *tsk, int user_tick) { cputime_t utime, utimescaled; @@ -274,18 +274,6 @@ void account_process_vtime(struct task_struct *tsk) account_user_time_scaled(tsk, utimescaled); } -static void account_process_time(struct pt_regs *regs) -{ - int cpu = smp_processor_id(); - - account_process_vtime(current); - run_local_timers(); - if (rcu_pending(cpu)) - rcu_check_callbacks(cpu, user_mode(regs)); - scheduler_tick(); - run_posix_cpu_timers(current); -} - /* * Stuff for accounting stolen time. */ @@ -375,7 +363,6 @@ static void snapshot_purr(void) #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */ #define calc_cputime_factors() -#define account_process_time(regs) update_process_times(user_mode(regs)) #define calculate_steal_time() do { } while (0) #endif @@ -586,7 +573,7 @@ void timer_interrupt(struct pt_regs * regs) /* not time for this event yet */ now = per_cpu(decrementer_next_tb, cpu) - now; if (now <= DECREMENTER_MAX) - set_dec((unsigned int)now - 1); + set_dec((int)now); return; } old_regs = set_irq_regs(regs); @@ -599,20 +586,8 @@ void timer_interrupt(struct pt_regs * regs) get_lppaca()->int_dword.fields.decr_int = 0; #endif - /* - * We cannot disable the decrementer, so in the period - * between this cpu's being marked offline in cpu_online_map - * and calling stop-self, it is taking timer interrupts. - * Avoid calling into the scheduler rebalancing code if this - * is the case. - */ - if (!cpu_is_offline(cpu)) - account_process_time(regs); - if (evt->event_handler) evt->event_handler(evt); - else - evt->set_next_event(DECREMENTER_MAX, evt); #ifdef CONFIG_PPC_ISERIES if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending()) @@ -836,9 +811,6 @@ static int decrementer_set_next_event(unsigned long evt, struct clock_event_device *dev) { __get_cpu_var(decrementer_next_tb) = get_tb_or_rtc() + evt; - /* The decrementer interrupts on the 0 -> -1 transition */ - if (evt) - --evt; set_dec(evt); return 0; } @@ -871,7 +843,8 @@ void init_decrementer_clockevent(void) decrementer_clockevent.shift); decrementer_clockevent.max_delta_ns = clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent); - decrementer_clockevent.min_delta_ns = 1000; + decrementer_clockevent.min_delta_ns = + clockevent_delta2ns(2, &decrementer_clockevent); register_decrementer_clockevent(cpu); } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 823a8cbd60b..f66fa5d966b 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -37,11 +37,10 @@ SECTIONS ALIGN_FUNCTION(); *(.text.head) _text = .; - TEXT_TEXT + *(.text .fixup .text.init.refok .exit.text.refok) SCHED_TEXT LOCK_TEXT KPROBES_TEXT - *(.fixup) #ifdef CONFIG_PPC32 *(.got1) diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index e067df836be..3899ea97fbd 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -98,13 +98,12 @@ unsigned long __init mmu_mapin_ram(void) v = KERNELBASE; p = PPC_MEMSTART; - s = 0; + s = total_lowmem; - if (__map_without_ltlbs) { - return s; - } + if (__map_without_ltlbs) + return 0; - while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) { + while (s >= LARGE_PAGE_SIZE_16M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -116,10 +115,10 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_16M; p += LARGE_PAGE_SIZE_16M; - s += LARGE_PAGE_SIZE_16M; + s -= LARGE_PAGE_SIZE_16M; } - while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) { + while (s >= LARGE_PAGE_SIZE_4M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -128,8 +127,8 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_4M; p += LARGE_PAGE_SIZE_4M; - s += LARGE_PAGE_SIZE_4M; + s -= LARGE_PAGE_SIZE_4M; } - return s; + return total_lowmem - s; } diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index c3df5047653..04dc08798d3 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -35,6 +35,7 @@ */ unsigned int tlb_44x_index; /* = 0 */ unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS; +int icache_44x_need_flush; /* * "Pins" a 256MB TLB entry in AS0 for kernel lowmem diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index a18fda361cc..8135da06e0a 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -309,7 +309,7 @@ good_area: set_bit(PG_arch_1, &page->flags); } pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); + _tlbie(address, mm->context.id); pte_unmap_unlock(ptep, ptl); up_read(&mm->mmap_sem); return 0; diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index ad253b95903..e935edd6b72 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -331,7 +331,7 @@ htab_pte_insert_failure: *****************************************************************************/ /* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, - * pte_t *ptep, unsigned long trap, int local) + * pte_t *ptep, unsigned long trap, int local, int ssize) */ /* @@ -557,7 +557,8 @@ htab_inval_old_hpte: mr r4,r31 /* PTE.pte */ li r5,0 /* PTE.hidx */ li r6,MMU_PAGE_64K /* psize */ - ld r7,STK_PARM(r8)(r1) /* local */ + ld r7,STK_PARM(r9)(r1) /* ssize */ + ld r8,STK_PARM(r8)(r1) /* local */ bl .flush_hash_page b htab_insert_pte diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c78dc912411..f09730bf3a3 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -51,6 +51,7 @@ #include <asm/cputable.h> #include <asm/sections.h> #include <asm/spu.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -791,8 +792,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) } if (user_region) { if (psize != get_paca()->context.user_psize) { - get_paca()->context.user_psize = - mm->context.user_psize; + get_paca()->context = mm->context; slb_flush_and_rebolt(); } } else if (get_paca()->vmalloc_sllp != @@ -885,6 +885,9 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, local_irq_restore(flags); } +/* WARNING: This is called from hash_low_64.S, if you change this prototype, + * do not forget to update the assembly call site ! + */ void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize, int local) { diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index c94a64fd3c0..eb3a732e91d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -61,12 +61,12 @@ extern unsigned long total_lowmem; #define mmu_mapin_ram() (0UL) #elif defined(CONFIG_4xx) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); #elif defined(CONFIG_FSL_BOOKE) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); extern void adjust_total_lowmem(void); diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index bbd2c512ee0..27922dff8b9 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -25,6 +25,7 @@ #include <asm/smp.h> #include <asm/firmware.h> #include <linux/compiler.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -148,6 +149,35 @@ void slb_vmalloc_update(void) slb_flush_and_rebolt(); } +/* Helper function to compare esids. There are four cases to handle. + * 1. The system is not 1T segment size capable. Use the GET_ESID compare. + * 2. The system is 1T capable, both addresses are < 1T, use the GET_ESID compare. + * 3. The system is 1T capable, only one of the two addresses is > 1T. This is not a match. + * 4. The system is 1T capable, both addresses are > 1T, use the GET_ESID_1T macro to compare. + */ +static inline int esids_match(unsigned long addr1, unsigned long addr2) +{ + int esid_1t_count; + + /* System is not 1T segment size capable. */ + if (!cpu_has_feature(CPU_FTR_1T_SEGMENT)) + return (GET_ESID(addr1) == GET_ESID(addr2)); + + esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) + + ((addr2 >> SID_SHIFT_1T) != 0)); + + /* both addresses are < 1T */ + if (esid_1t_count == 0) + return (GET_ESID(addr1) == GET_ESID(addr2)); + + /* One address < 1T, the other > 1T. Not a match */ + if (esid_1t_count == 1) + return 0; + + /* Both addresses are > 1T. */ + return (GET_ESID_1T(addr1) == GET_ESID_1T(addr2)); +} + /* Flush all user entries from the segment table of the current processor. */ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) { @@ -193,15 +223,14 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) return; slb_allocate(pc); - if (GET_ESID(pc) == GET_ESID(stack)) + if (esids_match(pc,stack)) return; if (is_kernel_addr(stack)) return; slb_allocate(stack); - if ((GET_ESID(pc) == GET_ESID(unmapped_base)) - || (GET_ESID(stack) == GET_ESID(unmapped_base))) + if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base)) return; if (is_kernel_addr(unmapped_base)) diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 151fd8b82d6..04f74f9f9ab 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -158,6 +158,18 @@ static unsigned int iic_get_irq(void) return virq; } +void iic_setup_cpu(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +u8 iic_get_target_id(int cpu) +{ + return per_cpu(iic, cpu).target_id; +} + +EXPORT_SYMBOL_GPL(iic_get_target_id); + #ifdef CONFIG_SMP /* Use the highest interrupt priorities for IPI */ @@ -166,29 +178,17 @@ static inline int iic_ipi_to_irq(int ipi) return IIC_IRQ_TYPE_IPI + 0xf - ipi; } -void iic_setup_cpu(void) -{ - out_be64(&__get_cpu_var(iic).regs->prio, 0xff); -} - void iic_cause_IPI(int cpu, int mesg) { out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4); } -u8 iic_get_target_id(int cpu) -{ - return per_cpu(iic, cpu).target_id; -} -EXPORT_SYMBOL_GPL(iic_get_target_id); - struct irq_host *iic_get_irq_host(int node) { return iic_host; } EXPORT_SYMBOL_GPL(iic_get_irq_host); - static irqreturn_t iic_ipi_action(int irq, void *dev_id) { int ipi = (int)(long)dev_id; diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index 1c0acbad742..e4438456c86 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -44,6 +44,7 @@ #include <asm/rtas.h> #include "interrupt.h" +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c index 1769d755eff..ddfb35ae741 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/celleb/setup.c @@ -49,6 +49,7 @@ #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/irq.h> +#include <asm/time.h> #include <asm/spu_priv1.h> #include <asm/firmware.h> #include <asm/of_platform.h> diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h index 69f1b437fc7..a1c23607403 100644 --- a/arch/powerpc/platforms/iseries/irq.h +++ b/arch/powerpc/platforms/iseries/irq.h @@ -1,9 +1,13 @@ #ifndef _ISERIES_IRQ_H #define _ISERIES_IRQ_H +#ifdef CONFIG_PCI extern void iSeries_init_IRQ(void); extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32); extern void iSeries_activate_IRQs(void); +#else +#define iSeries_init_IRQ NULL +#endif extern unsigned int iSeries_get_irq(void); #endif /* _ISERIES_IRQ_H */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 37ae07ee54a..0877a883411 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -617,10 +617,6 @@ static void iseries_dedicated_idle(void) } } -#ifndef CONFIG_PCI -void __init iSeries_init_IRQ(void) { } -#endif - static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size, unsigned long flags) { diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index d6435b03971..be06cfd9fa3 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -523,15 +523,16 @@ static void __init get_viotape_info(struct device_node *vio_root) static int __init iseries_vio_init(void) { struct device_node *vio_root; + int ret = -ENODEV; if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -ENODEV; + goto out; iommu_vio_init(); vio_root = of_find_node_by_path("/vdevice"); if (!vio_root) - return -ENODEV; + goto out; if (viopath_hostLp == HvLpIndexInvalid) { vio_set_hostlp(); @@ -544,10 +545,11 @@ static int __init iseries_vio_init(void) get_viocd_info(vio_root); get_viotape_info(vio_root); - return 0; + ret = 0; put_node: of_node_put(vio_root); - return -ENODEV; + out: + return ret; } arch_initcall(iseries_vio_init); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 22322b35a0f..fb3d636e088 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -186,6 +186,11 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); + if (!dev) { + printk(KERN_WARNING "EEH: no PCI device for this of node\n"); + return n; + } + /* Gather bridge-specific registers */ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg); @@ -198,7 +203,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) } /* Dump out the PCI-X command and status regs */ - cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_PCIX); + cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (cap) { rtas_read_config(pdn, cap, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg); @@ -210,7 +215,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) } /* If PCI-E capable, dump PCI-E cap 10, and the AER */ - cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_EXP); + cap = pci_find_capability(dev, PCI_CAP_ID_EXP); if (cap) { n += scnprintf(buf+n, len-n, "pci-e cap10:\n"); printk(KERN_WARNING @@ -222,7 +227,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); } - cap = pci_find_ext_capability(pdn->pcidev, PCI_EXT_CAP_ID_ERR); + cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); if (cap) { n += scnprintf(buf+n, len-n, "pci-e AER:\n"); printk(KERN_WARNING @@ -318,7 +323,7 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) if (rets[2] == 0) return -1; /* permanently unavailable */ - if (max_wait_msecs <= 0) return -1; + if (max_wait_msecs <= 0) break; mwait = rets[2]; if (mwait <= 0) { diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 15e015ef686..57e025e84ab 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -105,17 +105,18 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) return; rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen); + + /* A driver that needs a reset trumps all others */ + if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; - if (*res == PCI_ERS_RESULT_DISCONNECT && - rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; } /** * eeh_report_mmio_enabled - tell drivers that MMIO has been enabled * - * Report an EEH error to each device driver, collect up and - * merge the device driver responses. Cumulative response - * passed back in "userdata". + * Tells each device driver that IO ports, MMIO and config space I/O + * are now enabled. Collects up and merges the device driver responses. + * Cumulative response passed back in "userdata". */ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) @@ -123,17 +124,16 @@ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; - // dev->error_state = pci_channel_mmio_enabled; - if (!driver || !driver->err_handler || !driver->err_handler->mmio_enabled) return; rc = driver->err_handler->mmio_enabled (dev); + + /* A driver that needs a reset trumps all others */ + if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; - if (*res == PCI_ERS_RESULT_DISCONNECT && - rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; } /** diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 8b18a1c4009..b765b7c77b6 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -25,6 +25,7 @@ #include <asm/firmware.h> #include <asm/prom.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 2793a1b100e..f15222bbe13 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -171,6 +171,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) struct pci_dn *pdn; int hwirq, virq, i, rc; struct msi_desc *entry; + struct msi_msg msg; pdn = get_pdn(pdev); if (!pdn) @@ -213,6 +214,11 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) dev_dbg(&pdev->dev, "rtas_msi: allocated virq %d\n", virq); set_irq_msi(virq, entry); + + /* Read config space back so we can restore after reset */ + read_msi_msg(virq, &msg); + entry->msg = msg; + unmask_msi_irq(virq); } diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 7c1b27ac7d3..216c0f5680d 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -137,6 +137,7 @@ static void i8259_unmask_irq(unsigned int irq_nr) static struct irq_chip i8259_pic = { .typename = " i8259 ", .mask = i8259_mask_irq, + .disable = i8259_mask_irq, .unmask = i8259_unmask_irq, .mask_ack = i8259_mask_and_ack_irq, }; diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c index 9b3baa7317d..6933f9c73b4 100644 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -24,8 +24,9 @@ #define MV64X60_VAL_LEN_MAX 11 #define MV64X60_PCICFG_CPCI_HOTSWAP 0x68 -static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { struct pci_dev *phb; u32 v; @@ -44,8 +45,9 @@ static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, return sprintf(buf, "0x%08x\n", v); } -static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { struct pci_dev *phb; u32 v; diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index fba7ca17a67..b19bfef2034 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -244,6 +244,13 @@ syscall_exit_cont: andis. r10,r0,DBCR0_IC@h bnel- load_dbcr0 #endif +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + bne- 2f +1: +#endif /* CONFIG_44x */ stwcx. r0,0,r1 /* to clear the reservation */ lwz r4,_LINK(r1) lwz r5,_CCR(r1) @@ -258,6 +265,12 @@ syscall_exit_cont: mtspr SPRN_SRR1,r8 SYNC RFI +#ifdef CONFIG_44x +2: li r7,0 + iccci r0,r0 + stw r7,icache_44x_need_flush@l(r4) + b 1b +#endif /* CONFIG_44x */ 66: li r3,-ENOSYS b ret_from_syscall @@ -679,6 +692,16 @@ resume_kernel: /* interrupts are hard-disabled at this point */ restore: +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + beq+ 1f + li r6,0 + iccci r0,r0 + stw r6,icache_44x_need_flush@l(r4) +1: +#endif /* CONFIG_44x */ lwz r0,GPR0(r1) lwz r2,GPR2(r1) REST_4GPRS(3, r1) diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index a22e1f4d94c..e0c850d85c5 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -224,7 +224,16 @@ _GLOBAL(_tlbia) */ _GLOBAL(_tlbie) #if defined(CONFIG_40x) + /* We run the search with interrupts disabled because we have to change + * the PID and I don't want to preempt when that happens. + */ + mfmsr r5 + mfspr r6,SPRN_PID + wrteei 0 + mtspr SPRN_PID,r4 tlbsx. r3, 0, r3 + mtspr SPRN_PID,r6 + wrtee r5 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear. @@ -234,22 +243,21 @@ _GLOBAL(_tlbie) isync 10: #elif defined(CONFIG_44x) - mfspr r4,SPRN_MMUCR - mfspr r5,SPRN_PID /* Get PID */ - rlwimi r4,r5,0,24,31 /* Set TID */ + mfspr r5,SPRN_MMUCR + rlwimi r5,r4,0,24,31 /* Set TID */ /* We have to run the search with interrupts disabled, even critical * and debug interrupts (in fact the only critical exceptions we have * are debug and machine check). Otherwise an interrupt which causes * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */ - mfmsr r5 + mfmsr r4 lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l - andc r6,r5,r6 + andc r6,r4,r6 mtmsr r6 - mtspr SPRN_MMUCR,r4 + mtspr SPRN_MMUCR,r5 tlbsx. r3, 0, r3 - mtmsr r5 + mtmsr r4 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, @@ -491,12 +499,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 0b sync +#ifndef CONFIG_44x + /* We don't flush the icache on 44x. Those have a virtual icache + * and we don't have access to the virtual address here (it's + * not the page vaddr but where it's mapped in user space). The + * flushing of the icache on these is handled elsewhere, when + * a change in the address space occurs, before returning to + * user space + */ mtctr r4 1: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 1b sync isync +#endif /* CONFIG_44x */ blr /* diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 0a0a0487b33..6536a25cfcb 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -61,6 +61,7 @@ extern char etext[], _stext[]; */ unsigned int tlb_44x_index = 0; unsigned int tlb_44x_hwater = 62; +int icache_44x_need_flush; /* * "Pins" a 256MB TLB entry in AS0 for kernel lowmem diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c index 838e09db71d..ea785dbaac7 100644 --- a/arch/ppc/mm/4xx_mmu.c +++ b/arch/ppc/mm/4xx_mmu.c @@ -99,13 +99,12 @@ unsigned long __init mmu_mapin_ram(void) v = KERNELBASE; p = PPC_MEMSTART; - s = 0; + s = total_lowmem; - if (__map_without_ltlbs) { - return s; - } + if (__map_without_ltlbs) + return 0; - while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) { + while (s >= LARGE_PAGE_SIZE_16M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -117,10 +116,10 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_16M; p += LARGE_PAGE_SIZE_16M; - s += LARGE_PAGE_SIZE_16M; + s -= LARGE_PAGE_SIZE_16M; } - while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) { + while (s >= LARGE_PAGE_SIZE_4M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -129,8 +128,8 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_4M; p += LARGE_PAGE_SIZE_4M; - s += LARGE_PAGE_SIZE_4M; + s -= LARGE_PAGE_SIZE_4M; } - return s; + return total_lowmem - s; } diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index 254c23b755e..36c0e7529ed 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -227,7 +227,7 @@ good_area: set_bit(PG_arch_1, &page->flags); } pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); + _tlbie(address, mm->context.id); pte_unmap_unlock(ptep, ptl); up_read(&mm->mmap_sem); return 0; diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h index 540f3292b22..f1d4f2109a9 100644 --- a/arch/ppc/mm/mmu_decl.h +++ b/arch/ppc/mm/mmu_decl.h @@ -54,12 +54,12 @@ extern unsigned int num_tlbcam_entries; #define mmu_mapin_ram() (0UL) #elif defined(CONFIG_4xx) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); #elif defined(CONFIG_FSL_BOOKE) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); extern void adjust_total_lowmem(void); diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 05d7184d7e1..453643a0eee 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -236,7 +236,7 @@ ebony_early_serial_map(void) gen550_init(0, &port); /* Purge TLB entry added in head_44x.S for early serial access */ - _tlbie(UART0_IO_BASE); + _tlbie(UART0_IO_BASE, 0); #endif port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index 4b169610f15..b79ebb8a3e6 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -230,9 +230,14 @@ luan_setup_hoses(void) /* Allocate hoses for PCIX1 and PCIX2 */ hose1 = pcibios_alloc_controller(); + if (!hose1) + return; + hose2 = pcibios_alloc_controller(); - if (!hose1 || !hose2) + if (!hose2) { + pcibios_free_controller(hose1); return; + } /* Setup PCIX1 */ hose1->first_busno = 0; diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index fd0f971881d..28a712cd480 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -259,7 +259,7 @@ ocotea_early_serial_map(void) gen550_init(0, &port); /* Purge TLB entry added in head_44x.S for early serial access */ - _tlbie(UART0_IO_BASE); + _tlbie(UART0_IO_BASE, 0); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c index 888c492b4a4..f6a0c6650f3 100644 --- a/arch/ppc/platforms/4xx/taishan.c +++ b/arch/ppc/platforms/4xx/taishan.c @@ -316,7 +316,7 @@ taishan_early_serial_map(void) gen550_init(0, &port); /* Purge TLB entry added in head_44x.S for early serial access */ - _tlbie(UART0_IO_BASE); + _tlbie(UART0_IO_BASE, 0); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c index 1e5a00a4b5f..559f27c6aef 100644 --- a/arch/ppc/syslib/i8259.c +++ b/arch/ppc/syslib/i8259.c @@ -127,6 +127,7 @@ static void i8259_unmask_irq(unsigned int irq_nr) static struct irq_chip i8259_pic = { .typename = " i8259 ", .mask = i8259_mask_irq, + .disable = i8259_mask_irq, .unmask = i8259_unmask_irq, .mask_ack = i8259_mask_and_ack_irq, }; diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 15f0d732353..46588fa9438 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -25,6 +25,7 @@ #include <asm/machdep.h> #include <asm/bootinfo.h> #include <asm/time.h> +#include <asm/ppc_sys.h> #include "cpm2_pic.h" @@ -61,7 +62,7 @@ m8260_setup_arch(void) #endif identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME, - in_be32(CPM_MAP_ADDR + CPM_IMMR_OFFSET)); + in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET)); m82xx_board_setup(); } @@ -147,12 +148,12 @@ m8260_show_cpuinfo(struct seq_file *m) seq_printf(m, "vendor\t\t: %s\n" "machine\t\t: %s\n" "\n" - "mem size\t\t: 0x%08x\n" - "console baud\t\t: %d\n" + "mem size\t\t: 0x%08lx\n" + "console baud\t\t: %ld\n" "\n" - "core clock\t: %u MHz\n" - "CPM clock\t: %u MHz\n" - "bus clock\t: %u MHz\n", + "core clock\t: %lu MHz\n" + "CPM clock\t: %lu MHz\n" + "bus clock\t: %lu MHz\n", CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize, bp->bi_baudrate, bp->bi_intfreq / 1000000, bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000); diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index a963fe81359..22b800ce212 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -145,12 +145,8 @@ void account_ticks(u64 time) do_timer(ticks); #endif -#ifdef CONFIG_VIRT_CPU_ACCOUNTING - account_tick_vtime(current); -#else while (ticks--) update_process_times(user_mode(get_irq_regs())); -#endif s390_do_profile(); } diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 84ff78de6ba..c5f05b3fb2c 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -32,7 +32,7 @@ static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); * Update process times based on virtual cpu times stored by entry.S * to the lowcore fields user_timer, system_timer & steal_clock. */ -void account_tick_vtime(struct task_struct *tsk) +void account_process_tick(struct task_struct *tsk, int user_tick) { cputime_t cputime; __u64 timer, clock; @@ -64,12 +64,6 @@ void account_tick_vtime(struct task_struct *tsk) S390_lowcore.steal_clock -= cputime << 12; account_steal_time(tsk, cputime); } - - run_local_timers(); - if (rcu_pending(smp_processor_id())) - rcu_check_callbacks(smp_processor_id(), rcu_user_flag); - scheduler_tick(); - run_posix_cpu_timers(tsk); } /* diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 22a3eb38438..496d635f89b 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -211,10 +211,12 @@ config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R help - Select SolutionEngine if configuring for a Hitachi SH7709 - or SH7750 evaluation board. + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. config SH_7206_SOLUTION_ENGINE bool "SolutionEngine7206" @@ -603,7 +605,7 @@ config BOOT_LINK_OFFSET config UBC_WAKEUP bool "Wakeup UBC on startup" - depends on CPU_SH4 + depends on CPU_SH4 && !CPU_SH4A help Selecting this option will wakeup the User Break Controller (UBC) on startup. Although the UBC is left in an awake state when the processor diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index ab2f9f3c354..722da6851f5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -124,12 +124,13 @@ config KGDB_NMI config SH_KGDB_CONSOLE bool "Console messages through GDB" - depends on !SERIAL_SH_SCI_CONSOLE + depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y select SERIAL_CORE_CONSOLE default n config KGDB_SYSRQ bool "Allow SysRq 'G' to enter KGDB" + depends on MAGIC_SYSRQ default y comment "Serial port setup" diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index 943f93aa605..e55c6686b21 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/hs7751rvoip.h> diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index fa5fa392022..c05625975f2 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -15,20 +15,6 @@ #include <asm/io.h> #include <asm/machvec.h> -static struct ipr_data hs77501rvoip_ipr_map[] = { -#if defined(CONFIG_HS7751RVOIP_CODEC) - { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, -#endif -}; - -static void __init hs7751rvoip_init_irq(void) -{ - make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map)); - - init_hs7751rvoip_IRQ(); -} - static void hs7751rvoip_power_off(void) { ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR); @@ -75,14 +61,13 @@ static int __init hs7751rvoip_cf_init(void) return 0; } +device_initcall(hs7751rvoip_cf_init); /* * Initialize the board */ static void __init hs7751rvoip_setup(char **cmdline_p) { - device_initcall(hs7751rvoip_cf_init); - ctrl_outb(0xf0, PA_OUTPORTR); pm_power_off = hs7751rvoip_power_off; @@ -115,6 +100,6 @@ static struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_outsw = hs7751rvoip_outsw, .mv_outsl = hs7751rvoip_outsl, - .mv_init_irq = hs7751rvoip_init_irq, + .mv_init_irq = init_hs7751rvoip_IRQ, .mv_ioport_map = hs7751rvoip_ioport_map, }; diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index 2dce8bd97f9..0d56fd83bcb 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -11,7 +11,6 @@ #include <asm/machvec.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/irq.h> static struct ipr_data sh7710voipgw_ipr_map[] = { { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY }, diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c index 27da88486f7..9d5bfc77d0d 100644 --- a/arch/sh/boards/se/7206/irq.c +++ b/arch/sh/boards/se/7206/irq.c @@ -9,7 +9,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/irq.h> #include <linux/interrupt.h> #include <asm/se7206.h> diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index d07a3368f54..318bc8a3969 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -94,6 +94,7 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 16, }; static struct resource heartbeat_resources[] = { diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 20f064083cc..eb97dca5b73 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,8 +16,13 @@ #include <asm/machvec.h> #include <asm/se7722.h> #include <asm/io.h> +#include <asm/heartbeat.h> /* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, @@ -29,6 +34,9 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index 76e53b26a80..0f08ab3b2be 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -14,8 +14,13 @@ #include <asm/machvec.h> #include <asm/se7780.h> #include <asm/io.h> +#include <asm/heartbeat.h> /* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, @@ -27,6 +32,9 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/snapgear/Makefile index 59fc976bfc2..d2d2f4b6a50 100644 --- a/arch/sh/boards/snapgear/Makefile +++ b/arch/sh/boards/snapgear/Makefile @@ -2,5 +2,4 @@ # Makefile for the SnapGear specific parts of the kernel # -obj-y := setup.o io.o rtc.o - +obj-y := setup.o io.o diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c deleted file mode 100644 index edb3dd936cb..00000000000 --- a/arch/sh/boards/snapgear/rtc.c +++ /dev/null @@ -1,309 +0,0 @@ -/****************************************************************************/ -/* - * linux/arch/sh/boards/snapgear/rtc.c -- Secureedge5410 RTC code - * - * Copyright (C) 2002 David McCullough <davidm@snapgear.com> - * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> - * - * The SecureEdge5410 can have one of 2 real time clocks, the SH - * built in version or the preferred external DS1302. Here we work out - * each to see what we have and then run with it. - */ -/****************************************************************************/ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/rtc.h> -#include <linux/mc146818rtc.h> -#include <asm/io.h> - -static int use_ds1302; - -/****************************************************************************/ -/* - * we need to implement a DS1302 driver here that can operate in - * conjunction with the builtin rtc driver which is already quite friendly - */ -/*****************************************************************************/ - -#define RTC_CMD_READ 0x81 /* Read command */ -#define RTC_CMD_WRITE 0x80 /* Write command */ - -#define RTC_ADDR_YEAR 0x06 /* Address of year register */ -#define RTC_ADDR_DAY 0x05 /* Address of day of week register */ -#define RTC_ADDR_MON 0x04 /* Address of month register */ -#define RTC_ADDR_DATE 0x03 /* Address of day of month register */ -#define RTC_ADDR_HOUR 0x02 /* Address of hour register */ -#define RTC_ADDR_MIN 0x01 /* Address of minute register */ -#define RTC_ADDR_SEC 0x00 /* Address of second register */ - -#define RTC_RESET 0x1000 -#define RTC_IODATA 0x0800 -#define RTC_SCLK 0x0400 - -#define set_dirp(x) -#define get_dirp(x) 0 -#define set_dp(x) SECUREEDGE_WRITE_IOPORT(x, 0x1c00) -#define get_dp(x) SECUREEDGE_READ_IOPORT() - -static void ds1302_sendbits(unsigned int val) -{ - int i; - - for (i = 8; (i); i--, val >>= 1) { - set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? RTC_IODATA : 0)); - set_dp(get_dp() | RTC_SCLK); // clock high - set_dp(get_dp() & ~RTC_SCLK); // clock low - } -} - -static unsigned int ds1302_recvbits(void) -{ - unsigned int val; - int i; - - for (i = 0, val = 0; (i < 8); i++) { - val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i); - set_dp(get_dp() | RTC_SCLK); // clock high - set_dp(get_dp() & ~RTC_SCLK); // clock low - } - return(val); -} - -static unsigned int ds1302_readbyte(unsigned int addr) -{ - unsigned int val; - unsigned long flags; - - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - - set_dp(get_dp() | RTC_RESET); - ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ); - set_dirp(get_dirp() & ~RTC_IODATA); - val = ds1302_recvbits(); - set_dp(get_dp() & ~RTC_RESET); - local_irq_restore(flags); - - return(val); -} - -static void ds1302_writebyte(unsigned int addr, unsigned int val) -{ - unsigned long flags; - - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - set_dp(get_dp() | RTC_RESET); - ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE); - ds1302_sendbits(val); - set_dp(get_dp() & ~RTC_RESET); - local_irq_restore(flags); -} - -static void ds1302_reset(void) -{ - unsigned long flags; - /* Hardware dependent reset/init */ - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - local_irq_restore(flags); -} - -/*****************************************************************************/ - -static inline int bcd2int(int val) -{ - return((((val & 0xf0) >> 4) * 10) + (val & 0xf)); -} - -static inline int int2bcd(int val) -{ - return(((val / 10) << 4) + (val % 10)); -} - -/*****************************************************************************/ -/* - * Write and Read some RAM in the DS1302, if it works assume it's there - * Otherwise use the SH4 internal RTC - */ - -void snapgear_rtc_gettimeofday(struct timespec *); -int snapgear_rtc_settimeofday(const time_t); - -void __init secureedge5410_rtc_init(void) -{ - unsigned char *test = "snapgear"; - int i; - - ds1302_reset(); - - use_ds1302 = 1; - - for (i = 0; test[i]; i++) - ds1302_writebyte(32 + i, test[i]); - - for (i = 0; test[i]; i++) - if (ds1302_readbyte(32 + i) != test[i]) { - use_ds1302 = 0; - break; - } - - if (use_ds1302) { - rtc_sh_get_time = snapgear_rtc_gettimeofday; - rtc_sh_set_time = snapgear_rtc_settimeofday; - } - - printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal"); -} - -/****************************************************************************/ -/* - * our generic interface that chooses the correct code to use - */ - -void snapgear_rtc_gettimeofday(struct timespec *ts) -{ - unsigned int sec, min, hr, day, mon, yr; - - if (!use_ds1302) - return; - - sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC)); - min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); - hr = bcd2int(ds1302_readbyte(RTC_ADDR_HOUR)); - day = bcd2int(ds1302_readbyte(RTC_ADDR_DATE)); - mon = bcd2int(ds1302_readbyte(RTC_ADDR_MON)); - yr = bcd2int(ds1302_readbyte(RTC_ADDR_YEAR)); - -bad_time: - if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 || - hr > 23 || min > 59 || sec > 59) { - printk(KERN_ERR - "SnapGear RTC: invalid value, resetting to 1 Jan 2000\n"); - ds1302_writebyte(RTC_ADDR_MIN, min = 0); - ds1302_writebyte(RTC_ADDR_HOUR, hr = 0); - ds1302_writebyte(RTC_ADDR_DAY, 7); - ds1302_writebyte(RTC_ADDR_DATE, day = 1); - ds1302_writebyte(RTC_ADDR_MON, mon = 1); - ds1302_writebyte(RTC_ADDR_YEAR, yr = 0); - ds1302_writebyte(RTC_ADDR_SEC, sec = 0); - } - - ts->tv_sec = mktime(2000 + yr, mon, day, hr, min, sec); - if (ts->tv_sec < 0) { -#if 0 - printk("BAD TIME %d %d %d %d %d %d\n", yr, mon, day, hr, min, sec); -#endif - yr = 100; - goto bad_time; - } - ts->tv_nsec = 0; -} - -int snapgear_rtc_settimeofday(const time_t secs) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned long nowtime; - - if (!use_ds1302) - return 0; - -/* - * This is called direct from the kernel timer handling code. - * It is supposed to synchronize the kernel clock to the RTC. - */ - - nowtime = secs; - - /* STOP RTC */ - ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80); - - cmos_minutes = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - ds1302_writebyte(RTC_ADDR_MIN, int2bcd(real_minutes)); - ds1302_writebyte(RTC_ADDR_SEC, int2bcd(real_seconds)); - } else { - printk(KERN_WARNING - "SnapGear RTC: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* START RTC */ - ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80); - return(0); -} - -unsigned char secureedge5410_cmos_read(int addr) -{ - unsigned char val = 0; - - if (!use_ds1302) - return(__CMOS_READ(addr, w)); - - switch(addr) { - case RTC_SECONDS: val = ds1302_readbyte(RTC_ADDR_SEC); break; - case RTC_SECONDS_ALARM: break; - case RTC_MINUTES: val = ds1302_readbyte(RTC_ADDR_MIN); break; - case RTC_MINUTES_ALARM: break; - case RTC_HOURS: val = ds1302_readbyte(RTC_ADDR_HOUR); break; - case RTC_HOURS_ALARM: break; - case RTC_DAY_OF_WEEK: val = ds1302_readbyte(RTC_ADDR_DAY); break; - case RTC_DAY_OF_MONTH: val = ds1302_readbyte(RTC_ADDR_DATE); break; - case RTC_MONTH: val = ds1302_readbyte(RTC_ADDR_MON); break; - case RTC_YEAR: val = ds1302_readbyte(RTC_ADDR_YEAR); break; - case RTC_REG_A: /* RTC_FREQ_SELECT */ break; - case RTC_REG_B: /* RTC_CONTROL */ break; - case RTC_REG_C: /* RTC_INTR_FLAGS */ break; - case RTC_REG_D: val = RTC_VRT /* RTC_VALID */; break; - default: break; - } - - return(val); -} - -void secureedge5410_cmos_write(unsigned char val, int addr) -{ - if (!use_ds1302) { - __CMOS_WRITE(val, addr, w); - return; - } - - switch(addr) { - case RTC_SECONDS: ds1302_writebyte(RTC_ADDR_SEC, val); break; - case RTC_SECONDS_ALARM: break; - case RTC_MINUTES: ds1302_writebyte(RTC_ADDR_MIN, val); break; - case RTC_MINUTES_ALARM: break; - case RTC_HOURS: ds1302_writebyte(RTC_ADDR_HOUR, val); break; - case RTC_HOURS_ALARM: break; - case RTC_DAY_OF_WEEK: ds1302_writebyte(RTC_ADDR_DAY, val); break; - case RTC_DAY_OF_MONTH: ds1302_writebyte(RTC_ADDR_DATE, val); break; - case RTC_MONTH: ds1302_writebyte(RTC_ADDR_MON, val); break; - case RTC_YEAR: ds1302_writebyte(RTC_ADDR_YEAR, val); break; - case RTC_REG_A: /* RTC_FREQ_SELECT */ break; - case RTC_REG_B: /* RTC_CONTROL */ break; - case RTC_REG_C: /* RTC_INTR_FLAGS */ break; - case RTC_REG_D: /* RTC_VALID */ break; - default: break; - } -} diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 2b594f60000..7022483f98e 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -22,20 +22,15 @@ #include <asm/snapgear.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/rtc.h> #include <asm/cpu/timer.h> -extern void secureedge5410_rtc_init(void); -extern void pcibios_init(void); - -/****************************************************************************/ /* * EraseConfig handling functions */ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; + (void)ctrl_inb(0xb8000000); /* dummy read */ printk("SnapGear: erase switch interrupt!\n"); @@ -76,19 +71,10 @@ static void __init init_snapgear_IRQ(void) } /* - * Initialize the board - */ -static void __init snapgear_setup(char **cmdline_p) -{ - board_time_init = secureedge5410_rtc_init; -} - -/* * The Machine Vector */ static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", - .mv_setup = snapgear_setup, .mv_nr_irqs = 72, .mv_inb = snapgear_inb, diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 4c5ffdcd55b..1b0f5be01d1 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -39,7 +39,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%8x" \ quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ + -C none -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ $(obj)/uImage: $(obj)/zImage FORCE diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile index a106dd9db98..f7de4076e24 100644 --- a/arch/sh/cchips/hd6446x/Makefile +++ b/arch/sh/cchips/hd6446x/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_HD64461) += hd64461.o obj-$(CONFIG_HD64465) += hd64465/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile index 085de72fd32..f73963cb374 100644 --- a/arch/sh/cchips/voyagergx/Makefile +++ b/arch/sh/cchips/voyagergx/Makefile @@ -6,3 +6,4 @@ obj-y := irq.o setup.o obj-$(CONFIG_USB_OHCI_HCD) += consistent.o +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 2f65ac72f48..fba6b5ba0b3 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -5,7 +5,6 @@ obj-y += pci.o obj-$(CONFIG_PCI_AUTO) += pci-auto.o -obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c deleted file mode 100644 index 0814a5afe9b..00000000000 --- a/arch/sh/drivers/pci/pci-st40.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Support functions for the ST40 PCI hardware. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <asm/pci.h> -#include <linux/irq.h> -#include <linux/interrupt.h> /* irqreturn_t */ - -#include "pci-st40.h" - -/* This is in P2 of course */ -#define ST40PCI_BASE_ADDRESS (0xb0000000) -#define ST40PCI_MEM_ADDRESS (ST40PCI_BASE_ADDRESS+0x0) -#define ST40PCI_IO_ADDRESS (ST40PCI_BASE_ADDRESS+0x06000000) -#define ST40PCI_REG_ADDRESS (ST40PCI_BASE_ADDRESS+0x07000000) - -#define ST40PCI_REG(x) (ST40PCI_REG_ADDRESS+(ST40PCI_##x)) -#define ST40PCI_REG_INDEXED(reg, index) \ - (ST40PCI_REG(reg##0) + \ - ((ST40PCI_REG(reg##1) - ST40PCI_REG(reg##0))*index)) - -#define ST40PCI_WRITE(reg,val) writel((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_SHORT(reg,val) writew((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_BYTE(reg,val) writeb((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_INDEXED(reg, index, val) \ - writel((val), ST40PCI_REG_INDEXED(reg, index)); - -#define ST40PCI_READ(reg) readl(ST40PCI_REG(reg)) -#define ST40PCI_READ_SHORT(reg) readw(ST40PCI_REG(reg)) -#define ST40PCI_READ_BYTE(reg) readb(ST40PCI_REG(reg)) - -#define ST40PCI_SERR_IRQ 64 -#define ST40PCI_ERR_IRQ 65 - - -/* Macros to extract PLL params */ -#define PLL_MDIV(reg) ( ((unsigned)reg) & 0xff ) -#define PLL_NDIV(reg) ( (((unsigned)reg)>>8) & 0xff ) -#define PLL_PDIV(reg) ( (((unsigned)reg)>>16) & 0x3 ) -#define PLL_SETUP(reg) ( (((unsigned)reg)>>19) & 0x1ff ) - -/* Build up the appropriate settings */ -#define PLL_SET(mdiv,ndiv,pdiv,setup) \ -( ((mdiv)&0xff) | (((ndiv)&0xff)<<8) | (((pdiv)&3)<<16)| (((setup)&0x1ff)<<19)) - -#define PLLPCICR (0xbb040000+0x10) - -#define PLLPCICR_POWERON (1<<28) -#define PLLPCICR_OUT_EN (1<<29) -#define PLLPCICR_LOCKSELECT (1<<30) -#define PLLPCICR_LOCK (1<<31) - - -#define PLL_25MHZ 0x793c8512 -#define PLL_33MHZ PLL_SET(18,88,3,295) - -static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, - unsigned long pciOffset, unsigned long regionSize); - -static __init void SetPCIPLL(void) -{ - { - /* Lets play with the PLL values */ - unsigned long pll1cr1; - unsigned long mdiv, ndiv, pdiv; - unsigned long muxcr; - unsigned int muxcr_ratios[4] = { 8, 16, 21, 1 }; - unsigned int freq; - -#define CLKGENA 0xbb040000 -#define CLKGENA_PLL2_MUXCR CLKGENA + 0x48 - pll1cr1 = ctrl_inl(PLLPCICR); - printk("PLL1CR1 %08lx\n", pll1cr1); - mdiv = PLL_MDIV(pll1cr1); - ndiv = PLL_NDIV(pll1cr1); - pdiv = PLL_PDIV(pll1cr1); - printk("mdiv %02lx ndiv %02lx pdiv %02lx\n", mdiv, ndiv, pdiv); - freq = ((2*27*ndiv)/mdiv) / (1 << pdiv); - printk("PLL freq %dMHz\n", freq); - muxcr = ctrl_inl(CLKGENA_PLL2_MUXCR); - printk("PCI freq %dMhz\n", freq / muxcr_ratios[muxcr & 3]); - } -} - - -struct pci_err { - unsigned mask; - const char *error_string; -}; - -static struct pci_err int_error[]={ - { INT_MNLTDIM,"MNLTDIM: Master non-lock transfer"}, - { INT_TTADI, "TTADI: Illegal byte enable in I/O transfer"}, - { INT_TMTO, "TMTO: Target memory read/write timeout"}, - { INT_MDEI, "MDEI: Master function disable error"}, - { INT_APEDI, "APEDI: Address parity error"}, - { INT_SDI, "SDI: SERR detected"}, - { INT_DPEITW, "DPEITW: Data parity error target write"}, - { INT_PEDITR, "PEDITR: PERR detected"}, - { INT_TADIM, "TADIM: Target abort detected"}, - { INT_MADIM, "MADIM: Master abort detected"}, - { INT_MWPDI, "MWPDI: PERR from target at data write"}, - { INT_MRDPEI, "MRDPEI: Master read data parity error"} -}; -#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error) - -static struct pci_err aint_error[]={ - { AINT_MBI, "MBI: Master broken"}, - { AINT_TBTOI, "TBTOI: Target bus timeout"}, - { AINT_MBTOI, "MBTOI: Master bus timeout"}, - { AINT_TAI, "TAI: Target abort"}, - { AINT_MAI, "MAI: Master abort"}, - { AINT_RDPEI, "RDPEI: Read data parity"}, - { AINT_WDPE, "WDPE: Write data parity"} -}; - -#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error) - -static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors) -{ - int i; - - for(i=0;i<num_errors;i++) { - if(reg & error[i].mask) { - printk("%s\n",error[i].error_string); - } - } - -} - - -static char * pci_commands[16]={ - "Int Ack", - "Special Cycle", - "I/O Read", - "I/O Write", - "Reserved", - "Reserved", - "Memory Read", - "Memory Write", - "Reserved", - "Reserved", - "Configuration Read", - "Configuration Write", - "Memory Read Multiple", - "Dual Address Cycle", - "Memory Read Line", - "Memory Write-and-Invalidate" -}; - -static irqreturn_t st40_pci_irq(int irq, void *dev_instance) -{ - unsigned pci_int, pci_air, pci_cir, pci_aint; - static int count=0; - - - pci_int = ST40PCI_READ(INT);pci_aint = ST40PCI_READ(AINT); - pci_cir = ST40PCI_READ(CIR);pci_air = ST40PCI_READ(AIR); - - /* Reset state to stop multiple interrupts */ - ST40PCI_WRITE(INT, ~0); ST40PCI_WRITE(AINT, ~0); - - - if(++count>1) return IRQ_HANDLED; - - printk("** PCI ERROR **\n"); - - if(pci_int) { - printk("** INT register status\n"); - print_pci_errors(pci_int,int_error,NUM_PCI_INT_ERRS); - } - - if(pci_aint) { - printk("** AINT register status\n"); - print_pci_errors(pci_aint,aint_error,NUM_PCI_AINT_ERRS); - } - - printk("** Address and command info\n"); - - printk("** Command %s : Address 0x%x\n", - pci_commands[pci_cir&0xf],pci_air); - - if(pci_cir&CIR_PIOTEM) { - printk("CIR_PIOTEM:PIO transfer error for master\n"); - } - if(pci_cir&CIR_RWTET) { - printk("CIR_RWTET:Read/Write transfer error for target\n"); - } - - return IRQ_HANDLED; -} - - -/* Rounds a number UP to the nearest power of two. Used for - * sizing the PCI window. - */ -static u32 r2p2(u32 num) -{ - int i = 31; - u32 tmp = num; - - if (num == 0) - return 0; - - do { - if (tmp & (1 << 31)) - break; - i--; - tmp <<= 1; - } while (i >= 0); - - tmp = 1 << i; - /* If the original number isn't a power of 2, round it up */ - if (tmp != num) - tmp <<= 1; - - return tmp; -} - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -int __init st40pci_init(unsigned memStart, unsigned memSize) -{ - u32 lsr0; - - SetPCIPLL(); - - /* Initialises the ST40 pci subsystem, performing a reset, then programming - * up the address space decoders appropriately - */ - - /* Should reset core here as well methink */ - - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_SOFT_RESET); - - /* Loop while core resets */ - while (ST40PCI_READ(CR) & CR_SOFT_RESET); - - /* Switch off interrupts */ - ST40PCI_WRITE(INTM, 0); - ST40PCI_WRITE(AINT, 0); - - /* Now, lets reset all the cards on the bus with extreme prejudice */ - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_RSTCTL); - udelay(250); - - /* Set bus active, take it out of reset */ - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_BMAM | CR_CFINT | CR_PFCS | CR_PFE); - - /* The PCI spec says that no access must be made to the bus until 1 second - * after reset. This seem ludicrously long, but some delay is needed here - */ - mdelay(1000); - - /* Switch off interrupts */ - ST40PCI_WRITE(INTM, 0); - ST40PCI_WRITE(AINT, 0); - - /* Allow it to be a master */ - - ST40PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); - - /* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 - * on the PCI bus. This allows a nice 1-1 bus to phys mapping. - */ - - - ST40PCI_WRITE(MBR, 0x10000000); - /* Always set the max size 128M (actually, it is only 96MB wide) */ - ST40PCI_WRITE(MBMR, 0x07ff0000); - - /* I/O addresses are mapped at 0xb6000000 -> 0xb7000000. These are changed to 0, to - * allow cards that have legacy io such as vga to function correctly. This gives a - * maximum of 64K of io/space as only the bottom 16 bits of the address are copied - * over to the bus when the transaction is made. 64K of io space is more than enough - */ - ST40PCI_WRITE(IOBR, 0x0); - /* Set up the 64K window */ - ST40PCI_WRITE(IOBMR, 0x0); - - /* Now we set up the mbars so the PCI bus can see the local memory */ - /* Expose a 256M window starting at PCI address 0... */ - ST40PCI_WRITE(CSR_MBAR0, 0); - ST40PCI_WRITE(LSR0, 0x0fff0001); - - /* ... and set up the initial incoming window to expose all of RAM */ - pci_set_rbar_region(7, memStart, memStart, memSize); - - /* Maximise timeout values */ - ST40PCI_WRITE_BYTE(CSR_TRDY, 0xff); - ST40PCI_WRITE_BYTE(CSR_RETRY, 0xff); - ST40PCI_WRITE_BYTE(CSR_MIT, 0xff); - - ST40PCI_WRITE_BYTE(PERF,PERF_MASTER_WRITE_POSTING); - - return 1; -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - - -#define SET_CONFIG_BITS(bus,devfn,where)\ - (((bus) << 16) | ((devfn) << 8) | ((where) & ~3) | (bus!=0)) - -#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) - - -static int CheckForMasterAbort(void) -{ - if (ST40PCI_READ(INT) & INT_MADIM) { - /* Should we clear config space version as well ??? */ - ST40PCI_WRITE(INT, INT_MADIM); - ST40PCI_WRITE_SHORT(CSR_STATUS, 0); - return 1; - } - - return 0; -} - -/* Write to config register */ -static int st40pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) -{ - ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - switch (size) { - case 1: - *val = (u8)ST40PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)ST40PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = ST40PCI_READ(PDR); - break; - } - - if (CheckForMasterAbort()){ - switch (size) { - case 1: - *val = (u8)0xff; - break; - case 2: - *val = (u16)0xffff; - break; - case 4: - *val = 0xffffffff; - break; - } - } - - return PCIBIOS_SUCCESSFUL; -} - -static int st40pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - ST40PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - ST40PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - ST40PCI_WRITE(PDR, val); - break; - } - - CheckForMasterAbort(); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops st40pci_config_ops = { - .read = st40pci_read, - .write = st40pci_write, -}; - - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - -static int __init pcibios_init(void) -{ - extern unsigned long memory_start, memory_end; - - printk(KERN_ALERT "pci-st40.c: pcibios_init\n"); - - if (sh_mv.mv_init_pci != NULL) { - sh_mv.mv_init_pci(); - } - - /* The pci subsytem needs to know where memory is and how much - * of it there is. I've simply made these globals. A better mechanism - * is probably needed. - */ - st40pci_init(PHYSADDR(memory_start), - PHYSADDR(memory_end) - PHYSADDR(memory_start)); - - if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq, - IRQF_DISABLED, "st40pci", NULL)) { - printk(KERN_ERR "st40pci: Cannot hook interrupt\n"); - return -EIO; - } - - /* Enable the PCI interrupts on the device */ - ST40PCI_WRITE(INTM, ~0); - ST40PCI_WRITE(AINT, ~0); - - /* Map the io address apprioately */ -#ifdef CONFIG_HD64465 - hd64465_port_map(PCIBIOS_MIN_IO, (64 * 1024) - PCIBIOS_MIN_IO + 1, - ST40_IO_ADDR + PCIBIOS_MIN_IO, 0); -#endif - - /* ok, do the scan man */ - pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL); - pci_assign_unassigned_resources(); - - return 0; -} -subsys_initcall(pcibios_init); - -/* - * Publish a region of local address space over the PCI bus - * to other devices. - */ -static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, - unsigned long pciOffset, unsigned long regionSize) -{ - unsigned long mask; - - if (region > 7) - return; - - if (regionSize > (512 * 1024 * 1024)) - return; - - mask = r2p2(regionSize) - 0x10000; - - /* Disable the region (in case currently in use, should never happen) */ - ST40PCI_WRITE_INDEXED(RSR, region, 0); - - /* Start of local address space to publish */ - ST40PCI_WRITE_INDEXED(RLAR, region, PHYSADDR(localAddr) ); - - /* Start of region in PCI address space as an offset from MBAR0 */ - ST40PCI_WRITE_INDEXED(RBAR, region, pciOffset); - - /* Size of region */ - ST40PCI_WRITE_INDEXED(RSR, region, mask | 1); -} - diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h deleted file mode 100644 index cf0d35bd135..00000000000 --- a/arch/sh/drivers/pci/pci-st40.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Definitions for the ST40 PCI hardware. - */ - -#ifndef __PCI_ST40_H__ -#define __PCI_ST40_H__ - -#define ST40PCI_VCR_STATUS 0x00 - -#define ST40PCI_VCR_VERSION 0x08 - -#define ST40PCI_CR 0x10 - -#define CR_SOFT_RESET (1<<12) -#define CR_PFCS (1<<11) -#define CR_PFE (1<<9) -#define CR_BMAM (1<<6) -#define CR_HOST (1<<5) -#define CR_CLKEN (1<<4) -#define CR_SOCS (1<<3) -#define CR_IOCS (1<<2) -#define CR_RSTCTL (1<<1) -#define CR_CFINT (1<<0) -#define CR_LOCK_MASK 0x5a000000 - - -#define ST40PCI_LSR0 0X14 -#define ST40PCI_LAR0 0x1c - -#define ST40PCI_INT 0x24 -#define INT_MNLTDIM (1<<15) -#define INT_TTADI (1<<14) -#define INT_TMTO (1<<9) -#define INT_MDEI (1<<8) -#define INT_APEDI (1<<7) -#define INT_SDI (1<<6) -#define INT_DPEITW (1<<5) -#define INT_PEDITR (1<<4) -#define INT_TADIM (1<<3) -#define INT_MADIM (1<<2) -#define INT_MWPDI (1<<1) -#define INT_MRDPEI (1<<0) - - -#define ST40PCI_INTM 0x28 -#define ST40PCI_AIR 0x2c - -#define ST40PCI_CIR 0x30 -#define CIR_PIOTEM (1<<31) -#define CIR_RWTET (1<<26) - -#define ST40PCI_AINT 0x40 -#define AINT_MBI (1<<13) -#define AINT_TBTOI (1<<12) -#define AINT_MBTOI (1<<11) -#define AINT_TAI (1<<3) -#define AINT_MAI (1<<2) -#define AINT_RDPEI (1<<1) -#define AINT_WDPE (1<<0) - -#define ST40PCI_AINTM 0x44 -#define ST40PCI_BMIR 0x48 -#define ST40PCI_PAR 0x4c -#define ST40PCI_MBR 0x50 -#define ST40PCI_IOBR 0x54 -#define ST40PCI_PINT 0x58 -#define ST40PCI_PINTM 0x5c -#define ST40PCI_MBMR 0x70 -#define ST40PCI_IOBMR 0x74 -#define ST40PCI_PDR 0x78 - -/* H8 specific registers start here */ -#define ST40PCI_WCBAR 0x7c -#define ST40PCI_LOCCFG_UNLOCK 0x34 - -#define ST40PCI_RBAR0 0x100 -#define ST40PCI_RSR0 0x104 -#define ST40PCI_RLAR0 0x108 - -#define ST40PCI_RBAR1 0x110 -#define ST40PCI_RSR1 0x114 -#define ST40PCI_RLAR1 0x118 - - -#define ST40PCI_RBAR2 0x120 -#define ST40PCI_RSR2 0x124 -#define ST40PCI_RLAR2 0x128 - -#define ST40PCI_RBAR3 0x130 -#define ST40PCI_RSR3 0x134 -#define ST40PCI_RLAR3 0x138 - -#define ST40PCI_RBAR4 0x140 -#define ST40PCI_RSR4 0x144 -#define ST40PCI_RLAR4 0x148 - -#define ST40PCI_RBAR5 0x150 -#define ST40PCI_RSR5 0x154 -#define ST40PCI_RLAR5 0x158 - -#define ST40PCI_RBAR6 0x160 -#define ST40PCI_RSR6 0x164 -#define ST40PCI_RLAR6 0x168 - -#define ST40PCI_RBAR7 0x170 -#define ST40PCI_RSR7 0x174 -#define ST40PCI_RLAR7 0x178 - - -#define ST40PCI_RBAR(n) (0x100+(0x10*(n))) -#define ST40PCI_RSR(n) (0x104+(0x10*(n))) -#define ST40PCI_RLAR(n) (0x108+(0x10*(n))) - -#define ST40PCI_PERF 0x80 -#define PERF_MASTER_WRITE_POSTING (1<<4) -/* H8 specific registers end here */ - - -/* These are configs space registers */ -#define ST40PCI_CSR_VID 0x10000 -#define ST40PCI_CSR_DID 0x10002 -#define ST40PCI_CSR_CMD 0x10004 -#define ST40PCI_CSR_STATUS 0x10006 -#define ST40PCI_CSR_MBAR0 0x10010 -#define ST40PCI_CSR_TRDY 0x10040 -#define ST40PCI_CSR_RETRY 0x10041 -#define ST40PCI_CSR_MIT 0x1000d - -#define ST40_IO_ADDR 0xb6000000 - -#endif /* __PCI_ST40_H__ */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 1f141a8ba17..4b81d9c47b0 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -10,7 +10,6 @@ obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \ obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ - obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_CF_ENABLER) += cf-enabler.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o @@ -22,3 +21,5 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 2b2a9e02fb7..b6abf38d3a8 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -46,7 +46,7 @@ ENTRY(exception_handling_table) .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ ENTRY(nmi_slot) #if defined (CONFIG_KGDB_NMI) - .long debug_enter /* 1C0 */ ! Allow trap to debugger + .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger #else .long exception_none /* 1C0 */ ! Not implemented yet #endif diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 21375d777e9..bc9c28a69bf 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -139,14 +139,6 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; - case 0x8000: - boot_cpu_data.type = CPU_ST40RA; - boot_cpu_data.flags |= CPU_HAS_FPU; - break; - case 0x8100: - boot_cpu_data.type = CPU_ST40GX1; - boot_cpu_data.flags |= CPU_HAS_FPU; - break; case 0x700: boot_cpu_data.type = CPU_SH4_501; boot_cpu_data.icache.ways = 2; diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 348da194ec9..0586bc62ad9 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> -#include <linux/irq.h> #include <asm/processor.h> #include <asm/machvec.h> #include <asm/uaccess.h> diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 2fdc700dfd6..d453c3a1c79 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -102,6 +102,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/module.h> #include <asm/system.h> #include <asm/cacheflush.h> #include <asm/current.h> @@ -116,7 +117,9 @@ kgdb_debug_hook_t *kgdb_debug_hook; kgdb_bus_error_hook_t *kgdb_bus_err_hook; int (*kgdb_getchar)(void); +EXPORT_SYMBOL_GPL(kgdb_getchar); void (*kgdb_putchar)(int); +EXPORT_SYMBOL_GPL(kgdb_putchar); static void put_debug_char(int c) { @@ -136,7 +139,7 @@ static int get_debug_char(void) #define NUMREGBYTES (MAXREG*4) #define OUTBUFMAX (NUMREGBYTES*2+512) -enum regs { +enum { R0 = 0, R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, PC, PR, GBR, VBR, MACH, MACL, SR, @@ -176,9 +179,13 @@ int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */ /* SCI/UART settings, used in kgdb_console_setup() */ int kgdb_portnum = CONFIG_KGDB_DEFPORT; +EXPORT_SYMBOL_GPL(kgdb_portnum); int kgdb_baud = CONFIG_KGDB_DEFBAUD; +EXPORT_SYMBOL_GPL(kgdb_baud); char kgdb_parity = CONFIG_KGDB_DEFPARITY; +EXPORT_SYMBOL_GPL(kgdb_parity); char kgdb_bits = CONFIG_KGDB_DEFBITS; +EXPORT_SYMBOL_GPL(kgdb_bits); /* Jump buffer for setjmp/longjmp */ static jmp_buf rem_com_env; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 0b8c45d53a4..4156aac8c27 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -303,7 +303,6 @@ static const char *cpu_name[] = { [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", - [CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 548e4285b37..e1a6de9088b 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -106,7 +106,6 @@ DECLARE_EXPORT(__movmem); DECLARE_EXPORT(__movstr); #endif -#ifdef CONFIG_CPU_SH4 #if __GNUC__ == 4 DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); @@ -126,7 +125,6 @@ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); #endif /* __GNUC__ == 4 */ -#endif #if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ defined(CONFIG_SH7705_CACHE_32KB)) diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index e23dd1a3fcc..9dc7b698505 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -9,3 +9,5 @@ memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o lib-y += $(memcpy-y) + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index cf446bbab5b..1265f204f7d 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -17,7 +17,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 + select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP config CPU_SH4A @@ -29,10 +29,6 @@ config CPU_SH4AL_DSP select CPU_SH4A select CPU_HAS_DSP -config CPU_SUBTYPE_ST40 - bool - select CPU_SH4 - config CPU_SHX2 bool @@ -152,21 +148,6 @@ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" select CPU_SH4 -# ST40 Processor Support - -config CPU_SUBTYPE_ST40STB1 - bool "Support ST40STB1/ST40RA processors" - select CPU_SUBTYPE_ST40 - help - Select ST40STB1 if you have a ST40RA CPU. - This was previously called the ST40STB1, hence the option name. - -config CPU_SUBTYPE_ST40GX1 - bool "Support ST40GX1 processor" - select CPU_SUBTYPE_ST40 - help - Select ST40GX1 if you have a ST40GX1 CPU. - # SH-4A Processor Support config CPU_SUBTYPE_SH7770 diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index ee30fb44dfe..aa44607f072 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -33,3 +33,5 @@ endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_32BIT) += pmb.o obj-$(CONFIG_NUMA) += numa.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S index 8a706131e52..7a7c81ee3f0 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/mm/clear_page.S @@ -150,48 +150,3 @@ ENTRY(__clear_user) .long 8b, .Lbad_clear_user .long 9b, .Lbad_clear_user .previous - -#if defined(CONFIG_CPU_SH4) -/* - * __clear_user_page - * @to: P3 address (with same color) - * @orig_to: P1 address - * - * void __clear_user_page(void *to, void *orig_to) - */ - -/* - * r0 --- scratch - * r4 --- to - * r5 --- orig_to - * r6 --- to + PAGE_SIZE - */ -ENTRY(__clear_user_page) - mov.l .Lpsz,r0 - mov r4,r6 - add r0,r6 - mov #0,r0 - ! -1: ocbi @r5 - add #32,r5 - movca.l r0,@r4 - mov r4,r1 - add #32,r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - add #28,r4 - cmp/eq r6,r4 - bf/s 1b - ocbwb @r1 - ! - rts - nop -.Lpsz: .long PAGE_SIZE - -#endif - diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 3d8409daa4b..40685018b95 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -68,67 +68,6 @@ ENTRY(copy_page_slow) rts nop -#if defined(CONFIG_CPU_SH4) -/* - * __copy_user_page - * @to: P1 address (with same color) - * @from: P1 address - * @orig_to: P1 address - * - * void __copy_user_page(void *to, void *from, void *orig_to) - */ - -/* - * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + PAGE_SIZE - * r9 --- orig_to - * r10 --- to - * r11 --- from - */ -ENTRY(__copy_user_page) - mov.l r8,@-r15 - mov.l r9,@-r15 - mov.l r10,@-r15 - mov.l r11,@-r15 - mov r4,r10 - mov r5,r11 - mov r6,r9 - mov r5,r8 - mov.l .Lpsz,r0 - add r0,r8 - ! -1: ocbi @r9 - add #32,r9 - mov.l @r11+,r0 - mov.l @r11+,r1 - mov.l @r11+,r2 - mov.l @r11+,r3 - mov.l @r11+,r4 - mov.l @r11+,r5 - mov.l @r11+,r6 - mov.l @r11+,r7 - movca.l r0,@r10 - mov r10,r0 - add #32,r10 - mov.l r7,@-r10 - mov.l r6,@-r10 - mov.l r5,@-r10 - mov.l r4,@-r10 - mov.l r3,@-r10 - mov.l r2,@-r10 - mov.l r1,@-r10 - ocbwb @r0 - cmp/eq r11,r8 - bf/s 1b - add #28,r10 - ! - mov.l @r15+,r11 - mov.l @r15+,r10 - mov.l @r15+,r9 - mov.l @r15+,r8 - rts - nop -#endif .align 2 .Lpsz: .long PAGE_SIZE /* diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 25f5c6f6821..8c7a9ca7987 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -9,6 +9,8 @@ #include <linux/mm.h> #include <linux/mutex.h> #include <linux/fs.h> +#include <linux/highmem.h> +#include <linux/module.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -50,34 +52,61 @@ static inline void kunmap_coherent(struct page *page) void clear_user_page(void *to, unsigned long address, struct page *page) { __set_bit(PG_mapped, &page->flags); - if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) - clear_page(to); - else { - void *vto = kmap_coherent(page, address); - __clear_user_page(vto, to); - kunmap_coherent(vto); - } + + clear_page(to); + if ((((address & PAGE_MASK) ^ (unsigned long)to) & CACHE_ALIAS)) + __flush_wback_region(to, PAGE_SIZE); } -/* - * copy_user_page - * @to: P1 address - * @from: P1 address - * @address: U0 address to be mapped - * @page: page (virt_to_page(to)) - */ -void copy_user_page(void *to, void *from, unsigned long address, - struct page *page) +void copy_to_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) { + void *vto; + __set_bit(PG_mapped, &page->flags); - if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) - copy_page(to, from); - else { - void *vfrom = kmap_coherent(page, address); - __copy_user_page(vfrom, from, to); - kunmap_coherent(vfrom); - } + + vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); + kunmap_coherent(vto); + + if (vma->vm_flags & VM_EXEC) + flush_cache_page(vma, vaddr, page_to_pfn(page)); +} + +void copy_from_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + void *vfrom; + + __set_bit(PG_mapped, &page->flags); + + vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); + kunmap_coherent(vfrom); +} + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma) +{ + void *vfrom, *vto; + + __set_bit(PG_mapped, &to->flags); + + vto = kmap_atomic(to, KM_USER1); + vfrom = kmap_coherent(from, vaddr); + copy_page(vto, vfrom); + kunmap_coherent(vfrom); + + if (((vaddr ^ (unsigned long)vto) & CACHE_ALIAS)) + __flush_wback_region(vto, PAGE_SIZE); + + kunmap_atomic(vto, KM_USER1); + /* Make sure this page is cleared on other CPU's too before using it */ + smp_wmb(); } +EXPORT_SYMBOL(copy_user_highpage); /* * For SH-4, we have our own implementation for ptep_get_and_clear diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile index 1f25d9bb753..2efc2e79fd2 100644 --- a/arch/sh/oprofile/Makefile +++ b/arch/sh/oprofile/Makefile @@ -15,3 +15,4 @@ profdrvr-$(CONFIG_CPU_SUBTYPE_SH7091) := op_model_sh7750.o oprofile-y := $(DRIVER_OBJS) $(profdrvr-y) +EXTRA_CFLAGS += -Werror diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c index ceb9458abda..0761af4d2a4 100644 --- a/arch/sh64/kernel/process.c +++ b/arch/sh64/kernel/process.c @@ -26,6 +26,7 @@ #include <linux/reboot.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/proc_fs.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -656,9 +657,6 @@ unsigned long get_wchan(struct task_struct *p) */ #if defined(CONFIG_SH64_PROC_ASIDS) -#include <linux/init.h> -#include <linux/proc_fs.h> - static int asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data) { @@ -686,10 +684,8 @@ asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void static int __init register_proc_asids(void) { - create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); - return 0; + create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); + return 0; } - __initcall(register_proc_asids); #endif - diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c index c03101fab46..f32df3831f4 100644 --- a/arch/sh64/kernel/traps.c +++ b/arch/sh64/kernel/traps.c @@ -30,7 +30,6 @@ #include <linux/interrupt.h> #include <linux/sysctl.h> #include <linux/module.h> - #include <asm/system.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -242,9 +241,6 @@ DO_ERROR(12, SIGILL, "reserved instruction", reserved_inst, current) #endif /* CONFIG_SH64_ID2815_WORKAROUND */ - -#include <asm/system.h> - /* Called with interrupts disabled */ asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs) { @@ -984,4 +980,3 @@ asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs) /* Clear all DEBUGINT causes */ poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0); } - diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c index e1e24f31aa5..01a6756ba37 100644 --- a/arch/sparc/kernel/irq.c +++ b/arch/sparc/kernel/irq.c @@ -18,7 +18,6 @@ #include <linux/linkage.h> #include <linux/kernel_stat.h> #include <linux/signal.h> -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/random.h> diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c index 9f472a79d37..eeb5a2fc788 100644 --- a/arch/sparc64/kernel/ds.c +++ b/arch/sparc64/kernel/ds.c @@ -6,7 +6,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/types.h> -#include <linux/module.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/sched.h> diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c index 57987152769..158484bf599 100644 --- a/arch/sparc64/kernel/module.c +++ b/arch/sparc64/kernel/module.c @@ -11,7 +11,6 @@ #include <linux/fs.h> #include <linux/string.h> #include <linux/slab.h> -#include <linux/vmalloc.h> #include <linux/mm.h> #include <asm/processor.h> diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 78caff92673..98c468803ce 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -51,7 +51,6 @@ #include <linux/vfs.h> #include <linux/netfilter_ipv4/ip_tables.h> #include <linux/ptrace.h> -#include <linux/highuid.h> #include <asm/types.h> #include <asm/uaccess.h> diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c index 170d6ca8de6..cfc22d3fe54 100644 --- a/arch/sparc64/kernel/sys_sunos32.c +++ b/arch/sparc64/kernel/sys_sunos32.c @@ -57,7 +57,6 @@ #include <linux/personality.h> /* For SOCKET_I */ -#include <linux/socket.h> #include <net/sock.h> #include <net/compat.h> diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index a2cf955294c..4352ee4d8da 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -28,7 +28,6 @@ #include <linux/jiffies.h> #include <linux/cpufreq.h> #include <linux/percpu.h> -#include <linux/profile.h> #include <linux/miscdevice.h> #include <linux/rtc.h> #include <linux/kernel_stat.h> @@ -47,7 +46,6 @@ #include <asm/sections.h> #include <asm/cpudata.h> #include <asm/uaccess.h> -#include <asm/prom.h> #include <asm/irq_regs.h> DEFINE_SPINLOCK(mostek_lock); diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index b01dfb00e5f..67290117d90 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -22,8 +22,8 @@ export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS endif endif -CFLAGS += -DCONFIG_X86_32 -AFLAGS += -DCONFIG_X86_32 +KBUILD_CFLAGS += -DCONFIG_X86_32 +KBUILD_AFLAGS += -DCONFIG_X86_32 CONFIG_X86_32 := y export CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 9abbdf7562c..3b20613325d 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -139,13 +139,12 @@ struct set_mtrr_data { mtrr_type smp_type; }; -#ifdef CONFIG_SMP - static void ipi_handler(void *info) /* [SUMMARY] Synchronisation handler. Executed by "other" CPUs. [RETURNS] Nothing. */ { +#ifdef CONFIG_SMP struct set_mtrr_data *data = info; unsigned long flags; @@ -168,9 +167,8 @@ static void ipi_handler(void *info) atomic_dec(&data->count); local_irq_restore(flags); -} - #endif +} static inline int types_compatible(mtrr_type type1, mtrr_type type2) { return type1 == MTRR_TYPE_UNCACHABLE || diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index f803ed0ed1c..600fd404e44 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,13 +51,13 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); static int endflag __initdata = 0; -#ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all * CPUs during the test make them busy. */ static __init void nmi_cpu_busy(void *data) { +#ifdef CONFIG_SMP local_irq_enable_in_hardirq(); /* Intentionally don't use cpu_relax here. This is to make sure that the performance counter really ticks, @@ -67,8 +67,8 @@ static __init void nmi_cpu_busy(void *data) care if they get somewhat less cycles. */ while (endflag == 0) mb(); -} #endif +} static int __init check_nmi_watchdog(void) { |