aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/blackfin/Kconfig314
-rw-r--r--arch/blackfin/Kconfig.debug178
-rw-r--r--arch/blackfin/Makefile2
-rw-r--r--arch/blackfin/configs/BF527-EZKIT_defconfig27
-rw-r--r--arch/blackfin/configs/BF533-EZKIT_defconfig41
-rw-r--r--arch/blackfin/configs/BF533-STAMP_defconfig41
-rw-r--r--arch/blackfin/configs/BF537-STAMP_defconfig83
-rw-r--r--arch/blackfin/configs/BF548-EZKIT_defconfig30
-rw-r--r--arch/blackfin/configs/BF561-EZKIT_defconfig49
-rw-r--r--arch/blackfin/configs/H8606_defconfig1160
-rw-r--r--arch/blackfin/configs/PNAV-10_defconfig75
-rw-r--r--arch/blackfin/kernel/bfin_dma_5xx.c1
-rw-r--r--arch/blackfin/kernel/bfin_ksyms.c7
-rw-r--r--arch/blackfin/kernel/cplbinit.c73
-rw-r--r--arch/blackfin/kernel/early_printk.c3
-rw-r--r--arch/blackfin/kernel/process.c66
-rw-r--r--arch/blackfin/kernel/setup.c9
-rw-r--r--arch/blackfin/kernel/traps.c147
-rw-r--r--arch/blackfin/lib/Makefile2
-rw-r--r--arch/blackfin/lib/ins.S19
-rw-r--r--arch/blackfin/lib/strcmp.c11
-rw-r--r--arch/blackfin/lib/strcpy.c11
-rw-r--r--arch/blackfin/lib/strncmp.c11
-rw-r--r--arch/blackfin/lib/strncpy.c11
-rw-r--r--arch/blackfin/lib/udivdi3.S375
-rw-r--r--arch/blackfin/mach-bf527/Kconfig2
-rw-r--r--arch/blackfin/mach-bf527/boards/Kconfig12
-rw-r--r--arch/blackfin/mach-bf527/boards/Makefile6
-rw-r--r--arch/blackfin/mach-bf527/boards/eth_mac.c50
-rw-r--r--arch/blackfin/mach-bf527/boards/ezkit.c37
-rw-r--r--arch/blackfin/mach-bf533/Kconfig2
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c12
-rw-r--r--arch/blackfin/mach-bf533/boards/Kconfig34
-rw-r--r--arch/blackfin/mach-bf533/boards/Makefile2
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c4
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c4
-rw-r--r--arch/blackfin/mach-bf533/boards/generic_board.c4
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c4
-rw-r--r--arch/blackfin/mach-bf537/Kconfig2
-rw-r--r--arch/blackfin/mach-bf537/boards/Kconfig29
-rw-r--r--arch/blackfin/mach-bf537/boards/Makefile9
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537.c11
-rw-r--r--arch/blackfin/mach-bf537/boards/eth_mac.c50
-rw-r--r--arch/blackfin/mach-bf537/boards/generic_board.c13
-rw-r--r--arch/blackfin/mach-bf537/boards/pnav10.c15
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c50
-rw-r--r--arch/blackfin/mach-bf548/Kconfig2
-rw-r--r--arch/blackfin/mach-bf548/boards/Kconfig12
-rw-r--r--arch/blackfin/mach-bf548/boards/Makefile2
-rw-r--r--arch/blackfin/mach-bf548/boards/ezkit.c20
-rw-r--r--arch/blackfin/mach-bf548/head.S21
-rw-r--r--arch/blackfin/mach-bf561/Kconfig4
-rw-r--r--arch/blackfin/mach-bf561/boards/Kconfig27
-rw-r--r--arch/blackfin/mach-bf561/boards/Makefile2
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c4
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c29
-rw-r--r--arch/blackfin/mach-bf561/boards/generic_board.c4
-rw-r--r--arch/blackfin/mach-bf561/boards/tepla.c4
-rw-r--r--arch/blackfin/mach-common/cplbinfo.c2
-rw-r--r--arch/blackfin/mach-common/cplbmgr.S25
-rw-r--r--arch/blackfin/mach-common/entry.S54
-rw-r--r--arch/blackfin/mach-common/interrupt.S1
-rw-r--r--arch/blackfin/mach-common/ints-priority-dc.c21
-rw-r--r--arch/blackfin/mach-common/ints-priority-sc.c28
-rw-r--r--arch/blackfin/mach-common/irqpanic.c14
-rw-r--r--arch/blackfin/mm/blackfin_sram.c1
66 files changed, 2125 insertions, 1250 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 9f9de3e9582..2a3a7ea5958 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -3,7 +3,7 @@
# see Documentation/kbuild/kconfig-language.txt.
#
-mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration"
+mainmenu "Blackfin Kernel Configuration"
config MMU
bool
@@ -29,10 +29,6 @@ config ZONE_DMA
bool
default y
-config BFIN
- bool
- default y
-
config SEMAPHORE_SLEEPERS
bool
default y
@@ -50,7 +46,7 @@ config GENERIC_HARDIRQS
default y
config GENERIC_IRQ_PROBE
- bool
+ bool
default y
config GENERIC_TIME
@@ -69,11 +65,6 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config IRQCHIP_DEMUX_GPIO
- bool
- depends on (BF52x || BF53x || BF561 || BF54x)
- default y
-
source "init/Kconfig"
source "kernel/Kconfig.preempt"
@@ -140,6 +131,11 @@ config BF544
help
BF544 Processor Support.
+config BF547
+ bool "BF547"
+ help
+ BF547 Processor Support.
+
config BF548
bool "BF548"
help
@@ -166,11 +162,11 @@ choice
config BF_REV_0_0
bool "0.0"
- depends on (BF549 || BF527)
+ depends on (BF52x || BF54x)
config BF_REV_0_1
- bool "0.2"
- depends on (BF549 || BF527)
+ bool "0.1"
+ depends on (BF52x || BF54x)
config BF_REV_0_2
bool "0.2"
@@ -208,7 +204,7 @@ config BF53x
config BF54x
bool
- depends on (BF542 || BF544 || BF548 || BF549)
+ depends on (BF542 || BF544 || BF547 || BF548 || BF549)
default y
config BFIN_DUAL_CORE
@@ -221,95 +217,6 @@ config BFIN_SINGLE_CORE
depends on !BFIN_DUAL_CORE
default y
-choice
- prompt "System type"
- default BFIN533_STAMP
- help
- Do NOT change the board here. Please use the top level
- configuration to ensure that all the other settings are
- correct.
-
-config BFIN527_EZKIT
- bool "BF527-EZKIT"
- depends on (BF522 || BF525 || BF527)
- help
- BF533-EZKIT-LITE board Support.
-
-config BFIN533_EZKIT
- bool "BF533-EZKIT"
- depends on (BF533 || BF532 || BF531)
- help
- BF533-EZKIT-LITE board Support.
-
-config BFIN533_STAMP
- bool "BF533-STAMP"
- depends on (BF533 || BF532 || BF531)
- help
- BF533-STAMP board Support.
-
-config BFIN537_STAMP
- bool "BF537-STAMP"
- depends on (BF537 || BF536 || BF534)
- help
- BF537-STAMP board Support.
-
-config BFIN533_BLUETECHNIX_CM
- bool "Bluetechnix CM-BF533"
- depends on (BF533)
- help
- CM-BF533 support for EVAL- and DEV-Board.
-
-config BFIN537_BLUETECHNIX_CM
- bool "Bluetechnix CM-BF537"
- depends on (BF537)
- help
- CM-BF537 support for EVAL- and DEV-Board.
-
-config BFIN548_EZKIT
- bool "BF548-EZKIT"
- depends on (BF548 || BF549)
- help
- BFIN548-EZKIT board Support.
-
-config BFIN561_BLUETECHNIX_CM
- bool "Bluetechnix CM-BF561"
- depends on (BF561)
- help
- CM-BF561 support for EVAL- and DEV-Board.
-
-config BFIN561_EZKIT
- bool "BF561-EZKIT"
- depends on (BF561)
- help
- BF561-EZKIT-LITE board Support.
-
-config BFIN561_TEPLA
- bool "BF561-TEPLA"
- depends on (BF561)
- help
- BF561-TEPLA board Support.
-
-config PNAV10
- bool "PNAV 1.0 board"
- depends on (BF537)
- help
- PNAV 1.0 board Support.
-
-config H8606_HVSISTEMAS
- bool "HV Sistemas H8606"
- depends on (BF532)
- help
- HV Sistemas H8606 board support.
-
-config GENERIC_BOARD
- bool "Custom"
- depends on (BF537 || BF536 \
- || BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
- help
- GENERIC or Custom board Support.
-
-endchoice
-
config MEM_GENERIC_BOARD
bool
depends on GENERIC_BOARD
@@ -389,9 +296,9 @@ config BFIN_KERNEL_CLOCK
configuration.
config PLL_BYPASS
- bool "Bypass PLL"
- depends on BFIN_KERNEL_CLOCK
- default n
+ bool "Bypass PLL"
+ depends on BFIN_KERNEL_CLOCK
+ default n
config CLKIN_HALF
bool "Half Clock In"
@@ -468,11 +375,11 @@ config MAX_VCO_HZ
default 500000000 if BF534
default 400000000 if BF536
default 600000000 if BF537
- default 533000000 if BF538
- default 533000000 if BF539
+ default 533333333 if BF538
+ default 533333333 if BF539
default 600000000 if BF542
- default 533000000 if BF544
- default 533000000 if BF549
+ default 533333333 if BF544
+ default 533333333 if BF549
default 600000000 if BF561
config MIN_VCO_HZ
@@ -481,7 +388,7 @@ config MIN_VCO_HZ
config MAX_SCLK_HZ
int
- default 133000000
+ default 133333333
config MIN_SCLK_HZ
int
@@ -959,6 +866,20 @@ config BANK_3
default 0x99B3
endmenu
+config EBIU_MBSCTLVAL
+ hex "EBIU Bank Select Control Register"
+ depends on BF54x
+ default 0
+
+config EBIU_MODEVAL
+ hex "Flash Memory Mode Control Register"
+ depends on BF54x
+ default 1
+
+config EBIU_FCTLVAL
+ hex "Flash Memory Bank Control Register"
+ depends on BF54x
+ default 6
endmenu
#############################################################################
@@ -1075,174 +996,7 @@ source "fs/Kconfig"
source "kernel/Kconfig.instrumentation"
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_HWERR
- bool "Hardware error interrupt debugging"
- depends on DEBUG_KERNEL
- help
- When enabled, the hardware error interrupt is never disabled, and
- will happen immediately when an error condition occurs. This comes
- at a slight cost in code size, but is necessary if you are getting
- hardware error interrupts and need to know where they are coming
- from.
-
-config DEBUG_ICACHE_CHECK
- bool "Check Instruction cache coherency"
- depends on DEBUG_KERNEL
- depends on DEBUG_HWERR
- help
- Say Y here if you are getting weird unexplained errors. This will
- ensure that icache is what SDRAM says it should be by doing a
- byte wise comparison between SDRAM and instruction cache. This
- also relocates the irq_panic() function to L1 memory, (which is
- un-cached).
-
-config DEBUG_HUNT_FOR_ZERO
- bool "Catch NULL pointer reads/writes"
- default y
- help
- Say Y here to catch reads/writes to anywhere in the memory range
- from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
- catching common programming errors such as NULL pointer dereferences.
-
- Misbehaving applications will be killed (generate a SEGV) while the
- kernel will trigger a panic.
-
- Enabling this option will take up an extra entry in CPLB table.
- Otherwise, there is no extra overhead.
-
-config DEBUG_BFIN_HWTRACE_ON
- bool "Turn on Blackfin's Hardware Trace"
- default y
- help
- All Blackfins include a Trace Unit which stores a history of the last
- 16 changes in program flow taken by the program sequencer. The history
- allows the user to recreate the program sequencer’s recent path. This
- can be handy when an application dies - we print out the execution
- path of how it got to the offending instruction.
-
- By turning this off, you may save a tiny amount of power.
-
-choice
- prompt "Omit loop Tracing"
- default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
- depends on DEBUG_BFIN_HWTRACE_ON
- help
- The trace buffer can be configured to omit recording of changes in
- program flow that match either the last entry or one of the last
- two entries. Omitting one of these entries from the record prevents
- the trace buffer from overflowing because of any sort of loop (for, do
- while, etc) in the program.
-
- Because zero-overhead Hardware loops are not recorded in the trace buffer,
- this feature can be used to prevent trace overflow from loops that
- are nested four deep.
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
- bool "Trace all Loops"
- help
- The trace buffer records all changes of flow
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
- bool "Compress single-level loops"
- help
- The trace buffer does not record single loops - helpful if trace
- is spinning on a while or do loop.
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
- bool "Compress two-level loops"
- help
- The trace buffer does not record loops two levels deep. Helpful if
- the trace is spinning in a nested loop
-
-endchoice
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION
- int
- depends on DEBUG_BFIN_HWTRACE_ON
- default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
- default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
- default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
-
-
-config DEBUG_BFIN_HWTRACE_EXPAND
- bool "Expand Trace Buffer greater than 16 entries"
- depends on DEBUG_BFIN_HWTRACE_ON
- default n
- help
- By selecting this option, every time the 16 hardware entries in
- the Blackfin's HW Trace buffer are full, the kernel will move them
- into a software buffer, for dumping when there is an issue. This
- has a great impact on performance, (an interrupt every 16 change of
- flows) and should normally be turned off, except in those nasty
- debugging sessions
-
-config DEBUG_BFIN_HWTRACE_EXPAND_LEN
- int "Size of Trace buffer (in power of 2k)"
- range 0 4
- depends on DEBUG_BFIN_HWTRACE_EXPAND
- default 1
- help
- This sets the size of the software buffer that the trace information
- is kept in.
- 0 for (2^0) 1k, or 256 entries,
- 1 for (2^1) 2k, or 512 entries,
- 2 for (2^2) 4k, or 1024 entries,
- 3 for (2^3) 8k, or 2048 entries,
- 4 for (2^4) 16k, or 4096 entries
-
-config DEBUG_BFIN_NO_KERN_HWTRACE
- bool "Trace user apps (turn off hwtrace in kernel)"
- depends on DEBUG_BFIN_HWTRACE_ON
- default n
- help
- Some pieces of the kernel contain a lot of flow changes which can
- quickly fill up the hardware trace buffer. When debugging crashes,
- the hardware trace may indicate that the problem lies in kernel
- space when in reality an application is buggy.
-
- Say Y here to disable hardware tracing in some known "jumpy" pieces
- of code so that the trace buffer will extend further back.
-
-config EARLY_PRINTK
- bool "Early printk"
- default n
- help
- This option enables special console drivers which allow the kernel
- to print messages very early in the bootup process.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. After enabling this
- feature, you must add "earlyprintk=serial,uart0,57600" to the
- command line (bootargs). It is safe to say Y here in all cases, as
- all of this lives in the init section and is thrown away after the
- kernel boots completely.
-
-config DUAL_CORE_TEST_MODULE
- tristate "Dual Core Test Module"
- depends on (BF561)
- default n
- help
- Say Y here to build-in dual core test module for dual core test.
-
-config CPLB_INFO
- bool "Display the CPLB information"
- help
- Display the CPLB information.
-
-config ACCESS_CHECK
- bool "Check the user pointer address"
- default y
- help
- Usually the pointer transfer from user space is checked to see if its
- address is in the kernel space.
-
- Say N here to disable that check to improve the performance.
-
-endmenu
+source "arch/blackfin/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
new file mode 100644
index 00000000000..59b87a483c6
--- /dev/null
+++ b/arch/blackfin/Kconfig.debug
@@ -0,0 +1,178 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_MMRS
+ bool "Generate Blackfin MMR tree"
+ select DEBUG_FS
+ help
+ Create a tree of Blackfin MMRs via the debugfs tree. If
+ you enable this, you will find all MMRs laid out in the
+ /sys/kernel/debug/blackfin/ directory where you can read/write
+ MMRs directly from userspace. This is obviously just a debug
+ feature.
+
+config DEBUG_HWERR
+ bool "Hardware error interrupt debugging"
+ depends on DEBUG_KERNEL
+ help
+ When enabled, the hardware error interrupt is never disabled, and
+ will happen immediately when an error condition occurs. This comes
+ at a slight cost in code size, but is necessary if you are getting
+ hardware error interrupts and need to know where they are coming
+ from.
+
+config DEBUG_ICACHE_CHECK
+ bool "Check Instruction cache coherency"
+ depends on DEBUG_KERNEL
+ depends on DEBUG_HWERR
+ help
+ Say Y here if you are getting weird unexplained errors. This will
+ ensure that icache is what SDRAM says it should be by doing a
+ byte wise comparison between SDRAM and instruction cache. This
+ also relocates the irq_panic() function to L1 memory, (which is
+ un-cached).
+
+config DEBUG_HUNT_FOR_ZERO
+ bool "Catch NULL pointer reads/writes"
+ default y
+ help
+ Say Y here to catch reads/writes to anywhere in the memory range
+ from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
+ catching common programming errors such as NULL pointer dereferences.
+
+ Misbehaving applications will be killed (generate a SEGV) while the
+ kernel will trigger a panic.
+
+ Enabling this option will take up an extra entry in CPLB table.
+ Otherwise, there is no extra overhead.
+
+config DEBUG_BFIN_HWTRACE_ON
+ bool "Turn on Blackfin's Hardware Trace"
+ default y
+ help
+ All Blackfins include a Trace Unit which stores a history of the last
+ 16 changes in program flow taken by the program sequencer. The history
+ allows the user to recreate the program sequencer’s recent path. This
+ can be handy when an application dies - we print out the execution
+ path of how it got to the offending instruction.
+
+ By turning this off, you may save a tiny amount of power.
+
+choice
+ prompt "Omit loop Tracing"
+ default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ depends on DEBUG_BFIN_HWTRACE_ON
+ help
+ The trace buffer can be configured to omit recording of changes in
+ program flow that match either the last entry or one of the last
+ two entries. Omitting one of these entries from the record prevents
+ the trace buffer from overflowing because of any sort of loop (for, do
+ while, etc) in the program.
+
+ Because zero-overhead Hardware loops are not recorded in the trace buffer,
+ this feature can be used to prevent trace overflow from loops that
+ are nested four deep.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ bool "Trace all Loops"
+ help
+ The trace buffer records all changes of flow
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ bool "Compress single-level loops"
+ help
+ The trace buffer does not record single loops - helpful if trace
+ is spinning on a while or do loop.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+ bool "Compress two-level loops"
+ help
+ The trace buffer does not record loops two levels deep. Helpful if
+ the trace is spinning in a nested loop
+
+endchoice
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION
+ int
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+
+
+config DEBUG_BFIN_HWTRACE_EXPAND
+ bool "Expand Trace Buffer greater than 16 entries"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ By selecting this option, every time the 16 hardware entries in
+ the Blackfin's HW Trace buffer are full, the kernel will move them
+ into a software buffer, for dumping when there is an issue. This
+ has a great impact on performance, (an interrupt every 16 change of
+ flows) and should normally be turned off, except in those nasty
+ debugging sessions
+
+config DEBUG_BFIN_HWTRACE_EXPAND_LEN
+ int "Size of Trace buffer (in power of 2k)"
+ range 0 4
+ depends on DEBUG_BFIN_HWTRACE_EXPAND
+ default 1
+ help
+ This sets the size of the software buffer that the trace information
+ is kept in.
+ 0 for (2^0) 1k, or 256 entries,
+ 1 for (2^1) 2k, or 512 entries,
+ 2 for (2^2) 4k, or 1024 entries,
+ 3 for (2^3) 8k, or 2048 entries,
+ 4 for (2^4) 16k, or 4096 entries
+
+config DEBUG_BFIN_NO_KERN_HWTRACE
+ bool "Trace user apps (turn off hwtrace in kernel)"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ Some pieces of the kernel contain a lot of flow changes which can
+ quickly fill up the hardware trace buffer. When debugging crashes,
+ the hardware trace may indicate that the problem lies in kernel
+ space when in reality an application is buggy.
+
+ Say Y here to disable hardware tracing in some known "jumpy" pieces
+ of code so that the trace buffer will extend further back.
+
+config EARLY_PRINTK
+ bool "Early printk"
+ default n
+ help
+ This option enables special console drivers which allow the kernel
+ to print messages very early in the bootup process.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. After enabling this
+ feature, you must add "earlyprintk=serial,uart0,57600" to the
+ command line (bootargs). It is safe to say Y here in all cases, as
+ all of this lives in the init section and is thrown away after the
+ kernel boots completely.
+
+config DUAL_CORE_TEST_MODULE
+ tristate "Dual Core Test Module"
+ depends on (BF561)
+ default n
+ help
+ Say Y here to build-in dual core test module for dual core test.
+
+config CPLB_INFO
+ bool "Display the CPLB information"
+ help
+ Display the CPLB information.
+
+config ACCESS_CHECK
+ bool "Check the user pointer address"
+ default y
+ help
+ Usually the pointer transfer from user space is checked to see if its
+ address is in the kernel space.
+
+ Say N here to disable that check to improve the performance.
+
+endmenu
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index f7cac7c51e7..c47e000f832 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -31,6 +31,7 @@ machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF544) := bf548
+machine-$(CONFIG_BF547) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
@@ -48,6 +49,7 @@ cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF544) := bf544
+cpu-$(CONFIG_BF547) := bf547
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 1f6a93df6b3..fa6eb4e00fa 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.9
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -127,6 +125,7 @@ CONFIG_BF527=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
@@ -140,19 +139,8 @@ CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
CONFIG_BFIN_SINGLE_CORE=y
-CONFIG_BFIN527_EZKIT=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
CONFIG_MEM_MT48LC32M16A2TG_75=y
+CONFIG_BFIN527_EZKIT=y
#
# BF527 Specific Configuration
@@ -244,7 +232,7 @@ CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -301,6 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
@@ -322,7 +311,7 @@ CONFIG_L1_MAX_PIECE=16
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
@@ -548,6 +537,7 @@ CONFIG_BFIN_NAND_CLE=2
CONFIG_BFIN_NAND_ALE=1
CONFIG_BFIN_NAND_READY=3
CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_BF5XX is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
@@ -637,6 +627,7 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -708,7 +699,7 @@ CONFIG_INPUT_MISC=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 9e9b420342d..4fdb49362ba 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -64,7 +62,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
@@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
CONFIG_BF533=y
@@ -125,10 +125,12 @@ CONFIG_BF533=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
@@ -137,18 +139,12 @@ CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
CONFIG_BFIN533_EZKIT=y
# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
@@ -198,7 +194,7 @@ CONFIG_CLKIN_HZ=27000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -255,6 +251,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
@@ -276,7 +273,7 @@ CONFIG_L1_MAX_PIECE=16
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
@@ -526,14 +523,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_BF5xx=m
CONFIG_BFIN_FLASH_SIZE=0x400000
CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -622,6 +611,7 @@ CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -683,9 +673,9 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
@@ -708,6 +698,7 @@ CONFIG_SERIAL_BFIN_DMA=y
# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index f59ade98010..b04e8e533e9 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -64,7 +62,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
@@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
CONFIG_BF533=y
@@ -125,10 +125,12 @@ CONFIG_BF533=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
@@ -137,19 +139,13 @@ CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
+CONFIG_MEM_MT48LC64M4A2FB_7E=y
+CONFIG_BFIN_SHARED_FLASH_ENET=y
# CONFIG_BFIN533_EZKIT is not set
CONFIG_BFIN533_STAMP=y
-# CONFIG_BFIN537_STAMP is not set
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC64M4A2FB_7E=y
-CONFIG_BFIN_SHARED_FLASH_ENET=y
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
@@ -199,7 +195,7 @@ CONFIG_CLKIN_HZ=11059200
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -267,6 +263,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
@@ -288,7 +285,7 @@ CONFIG_L1_MAX_PIECE=16
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
@@ -634,6 +631,7 @@ CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -704,9 +702,9 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
@@ -732,6 +730,7 @@ CONFIG_SERIAL_BFIN_DMA=y
# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
@@ -925,6 +924,7 @@ CONFIG_NTSC=y
# CONFIG_PAL_YCBCR is not set
CONFIG_ADV7393_1XMEM=y
# CONFIG_ADV7393_2XMEM is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_LOGO is not set
@@ -979,11 +979,6 @@ CONFIG_SND_BFIN_AD73311_SE=4
# CONFIG_SND_SOC is not set
#
-# SoC Audio for the ADI Blackfin
-#
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-
-#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 07eb63dc25e..f812b66318b 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -64,7 +62,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
@@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
@@ -125,10 +125,12 @@ CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BF537=y
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
@@ -137,33 +139,8 @@ CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_IRQ_PLL_WAKEUP=7
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_PPI=8
CONFIG_IRQ_SPORT0_RX=9
@@ -176,8 +153,6 @@ CONFIG_IRQ_UART0_RX=10
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
CONFIG_IRQ_MAC_RX=11
CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TMR0=12
@@ -188,11 +163,31 @@ CONFIG_IRQ_TMR4=12
CONFIG_IRQ_TMR5=12
CONFIG_IRQ_TMR6=12
CONFIG_IRQ_TMR7=12
-CONFIG_IRQ_PROG_INTA=12
CONFIG_IRQ_PORTG_INTB=12
CONFIG_IRQ_MEM_DMA0=13
CONFIG_IRQ_MEM_DMA1=13
CONFIG_IRQ_WATCH=13
+CONFIG_BFIN537_STAMP=y
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_PNAV10 is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
#
# Board customizations
@@ -206,7 +201,7 @@ CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -263,6 +258,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
@@ -284,7 +280,7 @@ CONFIG_L1_MAX_PIECE=16
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
@@ -534,14 +530,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_BF5xx=m
CONFIG_BFIN_FLASH_SIZE=0x400000
CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -660,6 +648,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -730,9 +719,9 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
@@ -967,6 +956,7 @@ CONFIG_FB_BF537_LQ035=m
CONFIG_LQ035_SLAVE_ADDR=0x58
# CONFIG_FB_BFIN_LANDSCAPE is not set
# CONFIG_FB_BFIN_BGR is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_LOGO is not set
@@ -1021,11 +1011,6 @@ CONFIG_SND_BFIN_AD73311_SE=4
# CONFIG_SND_SOC is not set
#
-# SoC Audio for the ADI Blackfin
-#
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-
-#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0dd3d2253dc..48367cc9fe3 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,7 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.10
-# Sat Oct 27 02:34:07 2007
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -19,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -128,6 +125,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
CONFIG_BF549=y
# CONFIG_BF561 is not set
@@ -141,19 +139,6 @@ CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN527_EZKIT is not set
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-CONFIG_BFIN548_EZKIT=y
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_GENERIC_BOARD is not set
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_SPORT0_RX=9
@@ -180,6 +165,7 @@ CONFIG_IRQ_TIMER7=11
CONFIG_IRQ_TIMER8=11
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
+CONFIG_BFIN548_EZKIT=y
#
# BF548 Specific Configuration
@@ -279,9 +265,9 @@ CONFIG_PINT3_ASSIGN=0x02020303
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533333333
+CONFIG_MAX_VCO_HZ=533000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -376,6 +362,9 @@ CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x5554
CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B3
+CONFIG_EBUI_MBSCTLVAL=0x0
+CONFIG_EBUI_MODEVAL=0x1
+CONFIG_EBUI_FCTLVAL=0x6
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -702,6 +691,7 @@ CONFIG_SMSC911X=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -1058,6 +1048,8 @@ CONFIG_SND_SOC=y
CONFIG_SND_BF5XX_SOC=y
CONFIG_SND_BF5XX_SOC_AC97=y
CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
CONFIG_SND_BF5XX_SPORT_NUM=0
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
CONFIG_SND_SOC_AD1980=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 277d72dac0f..e9f100b45eb 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -64,7 +62,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
@@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
@@ -125,10 +125,12 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
CONFIG_BF561=y
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
@@ -136,18 +138,15 @@ CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BFIN_DUAL_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_SPI_ERROR=7
CONFIG_BFIN561_EZKIT=y
# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_GENERIC_BF561_BOARD is not set
#
# BF561 Specific Configuration
@@ -170,15 +169,11 @@ CONFIG_BF561_COREB_RESET=y
#
# Priority
#
-CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_DMA1_ERROR=7
CONFIG_IRQ_DMA2_ERROR=7
CONFIG_IRQ_IMDMA_ERROR=7
CONFIG_IRQ_PPI0_ERROR=7
CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_SPI_ERROR=7
CONFIG_IRQ_UART_ERROR=7
CONFIG_IRQ_RESERVED_ERROR=7
CONFIG_IRQ_DMA1_0=8
@@ -243,7 +238,7 @@ CONFIG_CLKIN_HZ=30000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -300,6 +295,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
@@ -321,7 +317,7 @@ CONFIG_L1_MAX_PIECE=16
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
@@ -564,14 +560,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_BF5xx=m
CONFIG_BFIN_FLASH_SIZE=0x0400000
CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -660,6 +648,7 @@ CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -721,9 +710,9 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
new file mode 100644
index 00000000000..18cbb8c3c37
--- /dev/null
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -0,0 +1,1160 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22.12
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
+# CONFIG_NP2 is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_BFIN_SINGLE_CORE=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+CONFIG_H8606_HVSISTEMAS=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=32
+CONFIG_MEM_ADD_WIDTH=9
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+# CONFIG_CACHELINE_ALIGNED_L1 is not set
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_LARGE_ALLOCS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_ICACHE_LOCK=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+CONFIG_L1_MAX_PIECE=16
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B3
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x100000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_BF5xx is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+CONFIG_DM9000=y
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_BF53X_PFBUTTONS is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+CONFIG_BF5xx_PFLAGS=y
+# CONFIG_BF5xx_PFLAGS_PROC is not set
+# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_SIMPLE_TIMER=y
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+CONFIG_BFIN_TIMER_LATENCY=y
+# CONFIG_AD5304 is not set
+# CONFIG_BF5xx_FBDMA is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_BFIN_WDT is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_BLACKFIN_DPMC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA Blackfin devices
+#
+CONFIG_SND_BLACKFIN_AD1836=m
+CONFIG_SND_BLACKFIN_AD1836_TDM=y
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+CONFIG_SND_BLACKFIN_SPORT=0
+CONFIG_SND_BLACKFIN_SPI_PFBIT=4
+# CONFIG_SND_BFIN_AD73311 is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# PBX support
+#
+# CONFIG_PBX is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 3d403e0b82c..25709f504d8 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -62,7 +60,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9
@@ -115,6 +112,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
@@ -123,10 +123,12 @@ CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BF537=y
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
@@ -135,33 +137,8 @@ CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-CONFIG_PNAV10=y
-# CONFIG_GENERIC_BOARD is not set
CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_IRQ_PLL_WAKEUP=7
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_PPI=8
CONFIG_IRQ_SPORT0_RX=9
@@ -174,8 +151,6 @@ CONFIG_IRQ_UART0_RX=10
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
CONFIG_IRQ_MAC_RX=11
CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TMR0=12
@@ -186,11 +161,31 @@ CONFIG_IRQ_TMR4=12
CONFIG_IRQ_TMR5=12
CONFIG_IRQ_TMR6=12
CONFIG_IRQ_TMR7=12
-CONFIG_IRQ_PROG_INTA=12
CONFIG_IRQ_PORTG_INTB=12
CONFIG_IRQ_MEM_DMA0=13
CONFIG_IRQ_MEM_DMA1=13
CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_PNAV10=y
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
#
# Board customizations
@@ -204,7 +199,7 @@ CONFIG_CLKIN_HZ=24576000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -261,6 +256,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
@@ -282,7 +278,7 @@ CONFIG_L1_MAX_PIECE=16
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
@@ -593,6 +589,7 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
@@ -675,9 +672,9 @@ CONFIG_INPUT_UINPUT=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
@@ -897,6 +894,7 @@ CONFIG_FB_BF537_LQ035=y
CONFIG_LQ035_SLAVE_ADDR=0x58
CONFIG_FB_BFIN_LANDSCAPE=y
# CONFIG_FB_BFIN_BGR is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_LOGO is not set
@@ -939,11 +937,6 @@ CONFIG_SND=m
# CONFIG_SND_SOC is not set
#
-# SoC Audio for the ADI Blackfin
-#
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-
-#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 503eef4c7fe..b54446055a4 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -436,6 +436,7 @@ unsigned long get_dma_curr_desc_ptr(unsigned int channel)
return dma_ch[channel].regs->curr_desc_ptr;
}
+EXPORT_SYMBOL(get_dma_curr_desc_ptr);
unsigned long get_dma_curr_addr(unsigned int channel)
{
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 2198afe40f3..0bfbb269e35 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -37,9 +37,6 @@
/* platform dependent support */
EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(dump_thread);
EXPORT_SYMBOL(ip_fast_csum);
@@ -51,6 +48,7 @@ EXPORT_SYMBOL(__down_trylock);
EXPORT_SYMBOL(__down_interruptible);
EXPORT_SYMBOL(is_in_rom);
+EXPORT_SYMBOL(bfin_return_from_exception);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy);
@@ -60,13 +58,11 @@ EXPORT_SYMBOL(csum_partial_copy);
* their interface isn't gonna change any time soon now, so
* it's OK to leave it out of version control.
*/
-EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(get_wchan);
/*
* libgcc functions - functions that are used internally by the
@@ -102,6 +98,7 @@ EXPORT_SYMBOL(outsw);
EXPORT_SYMBOL(insw);
EXPORT_SYMBOL(outsl);
EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(insl_16);
EXPORT_SYMBOL(irq_flags);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c
index f2db6a5e2b5..6320bc45fbb 100644
--- a/arch/blackfin/kernel/cplbinit.c
+++ b/arch/blackfin/kernel/cplbinit.c
@@ -26,29 +26,22 @@
#include <asm/cplb.h>
#include <asm/cplbinit.h>
-u_long icplb_table[MAX_CPLBS+1];
-u_long dcplb_table[MAX_CPLBS+1];
+u_long icplb_table[MAX_CPLBS + 1];
+u_long dcplb_table[MAX_CPLBS + 1];
#ifdef CONFIG_CPLB_SWITCH_TAB_L1
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
-
-#ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
-#endif /* CONFIG_CPLB_INFO */
-
+# define PDT_ATTR __attribute__((l1_data))
#else
+# define PDT_ATTR
+#endif
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
+u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR;
+u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR;
#ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
-#endif /* CONFIG_CPLB_INFO */
-
-#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
+u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR;
+u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR;
+#endif
struct s_cplb {
struct cplb_tab init_i;
@@ -71,7 +64,7 @@ static struct cplb_desc cplb_data[] = {
#else
.valid = 0,
#endif
- .name = "ZERO Pointer Saveguard",
+ .name = "Zero Pointer Guard Page",
},
{
.start = L1_CODE_START,
@@ -102,20 +95,20 @@ static struct cplb_desc cplb_data[] = {
.end = 0, /* dynamic */
.psize = 0,
.attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
- .i_conf = SDRAM_IGENERIC,
- .d_conf = SDRAM_DGENERIC,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DGENERIC,
.valid = 1,
- .name = "SDRAM Kernel",
+ .name = "Kernel Memory",
},
{
.start = 0, /* dynamic */
.end = 0, /* dynamic */
.psize = 0,
.attr = INITIAL_T | SWITCH_T | D_CPLB,
- .i_conf = SDRAM_IGENERIC,
- .d_conf = SDRAM_DNON_CHBL,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DNON_CHBL,
.valid = 1,
- .name = "SDRAM RAM MTD",
+ .name = "uClinux MTD Memory",
},
{
.start = 0, /* dynamic */
@@ -124,7 +117,7 @@ static struct cplb_desc cplb_data[] = {
.attr = INITIAL_T | SWITCH_T | D_CPLB,
.d_conf = SDRAM_DNON_CHBL,
.valid = 1,
- .name = "SDRAM Uncached DMA ZONE",
+ .name = "Uncached DMA Zone",
},
{
.start = 0, /* dynamic */
@@ -134,7 +127,7 @@ static struct cplb_desc cplb_data[] = {
.i_conf = 0, /* dynamic */
.d_conf = 0, /* dynamic */
.valid = 1,
- .name = "SDRAM Reserved Memory",
+ .name = "Reserved Memory",
},
{
.start = ASYNC_BANK0_BASE,
@@ -143,14 +136,14 @@ static struct cplb_desc cplb_data[] = {
.attr = SWITCH_T | D_CPLB,
.d_conf = SDRAM_EBIU,
.valid = 1,
- .name = "ASYNC Memory",
+ .name = "Asynchronous Memory Banks",
},
{
-#if defined(CONFIG_BF561)
- .start = L2_SRAM,
- .end = L2_SRAM_END,
+#ifdef L2_START
+ .start = L2_START,
+ .end = L2_START + L2_LENGTH,
.psize = SIZE_1M,
- .attr = SWITCH_T | D_CPLB,
+ .attr = SWITCH_T | I_CPLB | D_CPLB,
.i_conf = L2_MEMORY,
.d_conf = L2_MEMORY,
.valid = 1,
@@ -158,13 +151,23 @@ static struct cplb_desc cplb_data[] = {
.valid = 0,
#endif
.name = "L2 Memory",
- }
+ },
+ {
+ .start = BOOT_ROM_START,
+ .end = BOOT_ROM_START + BOOT_ROM_LENGTH,
+ .psize = SIZE_1M,
+ .attr = SWITCH_T | I_CPLB | D_CPLB,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DGENERIC,
+ .valid = 1,
+ .name = "On-Chip BootROM",
+ },
};
static u16 __init lock_kernel_check(u32 start, u32 end)
{
- if ((start <= (u32) _stext && end >= (u32) _end)
- || (start >= (u32) _stext && end <= (u32) _end))
+ if ((end <= (u32) _end && end >= (u32)_stext) ||
+ (start <= (u32) _end && start >= (u32)_stext))
return IN_KERNEL;
return 0;
}
@@ -350,7 +353,7 @@ void __init generate_cpl_tables(void)
else
cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
- for (i = ZERO_P; i <= L2_MEM; i++) {
+ for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) {
if (!cplb_data[i].valid)
continue;
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 6ec518a8111..724f4a5a1d4 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -205,7 +205,8 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
if (likely(early_console == NULL))
setup_early_printk(DEFAULT_EARLY_PORT);
- dump_bfin_regs(fp, retaddr);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
dump_bfin_trace_buffer();
panic("Died early");
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 9124467651c..5bf15125f0d 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -134,27 +134,6 @@ void cpu_idle(void)
}
}
-void show_regs(struct pt_regs *regs)
-{
- printk(KERN_NOTICE "\n");
- printk(KERN_NOTICE
- "PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n",
- regs->pc, regs->astat, regs->seqstat, regs->rets);
- printk(KERN_NOTICE
- "A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n",
- regs->a0x, regs->a0w, regs->a1x, regs->a1w);
- printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
- regs->p0, regs->p1, regs->p2, regs->p3);
- printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5);
- printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
- regs->r0, regs->r1, regs->r2, regs->r3);
- printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
- regs->r4, regs->r5, regs->r6, regs->r7);
-
- if (!regs->ipend)
- printk(KERN_NOTICE "USP: %08lx\n", rdusp());
-}
-
/* Fill in the fpu structure for a core dump. */
int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
@@ -239,51 +218,6 @@ copy_thread(int nr, unsigned long clone_flags,
}
/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs *regs, struct user *dump)
-{
- dump->magic = CMAGIC;
- dump->start_code = 0;
- dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long)(current->mm->brk +
- (PAGE_SIZE - 1))) >> PAGE_SHIFT;
- dump->u_dsize -= dump->u_tsize;
- dump->u_ssize = 0;
-
- if (dump->start_stack < TASK_SIZE)
- dump->u_ssize =
- ((unsigned long)(TASK_SIZE -
- dump->start_stack)) >> PAGE_SHIFT;
-
- dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump);
-
- dump->regs.r0 = regs->r0;
- dump->regs.r1 = regs->r1;
- dump->regs.r2 = regs->r2;
- dump->regs.r3 = regs->r3;
- dump->regs.r4 = regs->r4;
- dump->regs.r5 = regs->r5;
- dump->regs.r6 = regs->r6;
- dump->regs.r7 = regs->r7;
- dump->regs.p0 = regs->p0;
- dump->regs.p1 = regs->p1;
- dump->regs.p2 = regs->p2;
- dump->regs.p3 = regs->p3;
- dump->regs.p4 = regs->p4;
- dump->regs.p5 = regs->p5;
- dump->regs.orig_p0 = regs->orig_p0;
- dump->regs.a0w = regs->a0w;
- dump->regs.a1w = regs->a1w;
- dump->regs.a0x = regs->a0x;
- dump->regs.a1x = regs->a1x;
- dump->regs.rets = regs->rets;
- dump->regs.astat = regs->astat;
- dump->regs.pc = regs->pc;
-}
-
-/*
* sys_execve() executes a new program.
*/
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 934234f4383..d2822010b7c 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -43,6 +43,7 @@
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
+#include <asm/div64.h>
#include <asm/fixed_code.h>
#include <asm/early_printk.h>
@@ -504,13 +505,17 @@ EXPORT_SYMBOL(get_sclk);
unsigned long sclk_to_usecs(unsigned long sclk)
{
- return (USEC_PER_SEC * (u64)sclk) / get_sclk();
+ u64 tmp = USEC_PER_SEC * (u64)sclk;
+ do_div(tmp, get_sclk());
+ return tmp;
}
EXPORT_SYMBOL(sclk_to_usecs);
unsigned long usecs_to_sclk(unsigned long usecs)
{
- return (get_sclk() * (u64)usecs) / USEC_PER_SEC;
+ u64 tmp = get_sclk() * (u64)usecs;
+ do_div(tmp, USEC_PER_SEC);
+ return tmp;
}
EXPORT_SYMBOL(usecs_to_sclk);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index cfa05436c97..21a55ef19cb 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -158,7 +158,7 @@ static void decode_address(char *buf, unsigned long address)
}
/* we were unable to find this address anywhere */
- sprintf(buf, "[<0x%p>]", (void *)address);
+ sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
done:
write_unlock_irqrestore(&tasklist_lock, flags);
@@ -169,7 +169,9 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
console_verbose();
oops_in_progress = 1;
printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
- dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_process(fp);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
panic("Double Fault - unrecoverable event\n");
}
@@ -250,7 +252,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_EXCPT03:
info.si_code = SEGV_STACKFLOW;
sig = SIGSEGV;
- printk(KERN_NOTICE EXC_0x03);
+ printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x04 - User Defined, Caught by default */
@@ -279,7 +281,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_OVFLOW:
info.si_code = TRAP_TRACEFLOW;
sig = SIGTRAP;
- printk(KERN_NOTICE EXC_0x11);
+ printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x12 - Reserved, Caught by default */
@@ -301,36 +303,35 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_UNDEF_I:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x21);
+ printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x22 - Illegal Instruction Combination, handled here */
case VEC_ILGAL_I:
info.si_code = ILL_ILLPARAOP;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x22);
+ printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
- /* 0x23 - Data CPLB Protection Violation,
- normal case is handled in _cplb_hdr */
+ /* 0x23 - Data CPLB protection violation, handled here */
case VEC_CPLB_VL:
info.si_code = ILL_CPLB_VI;
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x23);
+ sig = SIGBUS;
+ printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x24 - Data access misaligned, handled here */
case VEC_MISALI_D:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x24);
+ printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x25 - Unrecoverable Event, handled here */
case VEC_UNCOV:
info.si_code = ILL_ILLEXCPT;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x25);
+ printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
@@ -338,7 +339,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_CPLB_M:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x26);
+ printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
@@ -349,7 +350,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
printk(KERN_NOTICE "NULL pointer access (probably)\n");
#else
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x27);
+ printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
#endif
CHK_DEBUGGER_TRAP();
break;
@@ -357,7 +358,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_WATCH:
info.si_code = TRAP_WATCHPT;
sig = SIGTRAP;
- pr_debug(EXC_0x28);
+ pr_debug(EXC_0x28(KERN_DEBUG));
CHK_DEBUGGER_TRAP_MAYBE();
/* Check if this is a watchpoint in kernel space */
if (fp->ipend & 0xffc0)
@@ -379,22 +380,21 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_MISALI_I:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2A);
+ printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
- /* 0x2B - Instruction CPLB protection Violation,
- handled in _cplb_hdr */
+ /* 0x2B - Instruction CPLB protection violation, handled here */
case VEC_CPLB_I_VL:
info.si_code = ILL_CPLB_VI;
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2B);
+ sig = SIGBUS;
+ printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
case VEC_CPLB_I_M:
info.si_code = ILL_CPLB_MISS;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2C);
+ printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
@@ -405,7 +405,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
#else
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2D);
+ printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
#endif
CHK_DEBUGGER_TRAP();
break;
@@ -413,7 +413,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
case VEC_ILL_RES:
info.si_code = ILL_PRVOPC;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2E);
+ printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2F - Reserved, Caught by default */
@@ -446,7 +446,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
if (sig != SIGTRAP) {
unsigned long stack;
- dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_process(fp);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
/* Print out the trace buffer if it makes sense */
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
@@ -460,22 +462,25 @@ asmlinkage void trap_c(struct pt_regs *fp)
show_stack(current, &stack);
if (oops_in_progress) {
#ifndef CONFIG_ACCESS_CHECK
- printk(KERN_EMERG "Hey - dork - please turn on "
- "CONFIG_ACCESS_CHECK\n");
+ printk(KERN_EMERG "Please turn on "
+ "CONFIG_ACCESS_CHECK\n");
#endif
panic("Kernel exception");
}
-
- /* Ensure that bad return addresses don't end up in an infinite
- * loop, due to speculative loads/reads
- */
- fp->pc = SAFE_USER_INSTRUCTION;
}
+
info.si_signo = sig;
info.si_errno = 0;
info.si_addr = (void *)fp->pc;
force_sig_info(sig, &info, current);
+ /* Ensure that bad return addresses don't end up in an infinite
+ * loop, due to speculative loads/reads. This needs to be done after
+ * the signal has been sent.
+ */
+ if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP)
+ fp->pc = SAFE_USER_INSTRUCTION;
+
trace_buffer_restore(j);
return;
}
@@ -600,37 +605,48 @@ void dump_stack(void)
show_stack(current, &stack);
trace_buffer_restore(tflags);
}
-
EXPORT_SYMBOL(dump_stack);
-void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
+void dump_bfin_process(struct pt_regs *fp)
{
- char buf [150];
+ /* We should be able to look at fp->ipend, but we don't push it on the
+ * stack all the time, so do this until we fix that */
+ unsigned int context = bfin_read_IPEND();
+
+ if (oops_in_progress)
+ printk(KERN_EMERG "Kernel OOPS in progress\n");
+
+ if (context & 0x0020)
+ printk(KERN_NOTICE "Deferred excecption or HW Error context\n");
+ else if (context & 0x3FC0)
+ printk(KERN_NOTICE "Interrupt context\n");
+ else if (context & 0x4000)
+ printk(KERN_NOTICE "Deferred Interrupt context\n");
+ else if (context & 0x8000)
+ printk(KERN_NOTICE "Kernel process context\n");
+
+ if (current->pid && current->mm) {
+ printk(KERN_NOTICE "CURRENT PROCESS:\n");
+ printk(KERN_NOTICE "COMM=%s PID=%d\n",
+ current->comm, current->pid);
+
+ printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
+ KERN_NOTICE "\n",
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
+ } else
+ printk(KERN_NOTICE "\n" KERN_NOTICE
+ "No Valid process in current context\n");
+}
- if (!oops_in_progress) {
- if (current->pid && current->mm) {
- printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n");
- printk(KERN_NOTICE "COMM=%s PID=%d\n",
- current->comm, current->pid);
-
- printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_NOTICE "\n",
- (void *)current->mm->start_code,
- (void *)current->mm->end_code,
- (void *)current->mm->start_data,
- (void *)current->mm->end_data,
- (void *)current->mm->end_data,
- (void *)current->mm->brk,
- (void *)current->mm->start_stack);
- } else {
- printk (KERN_NOTICE "\n" KERN_NOTICE
- "No Valid pid - Either things are really messed up,"
- " or you are in the kernel\n");
- }
- } else {
- printk(KERN_NOTICE "Kernel or interrupt exception\n");
- }
+void dump_bfin_mem(void *retaddr)
+{
if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end
#if L1_CODE_LENGTH != 0
@@ -671,8 +687,13 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
printk("\n");
} else
printk("\n" KERN_NOTICE
- "Cannot look at the [PC] for it is"
- " in unreadable memory - sorry\n");
+ "Cannot look at the [PC] <%p> for it is"
+ " in unreadable memory - sorry\n", retaddr);
+}
+
+void show_regs(struct pt_regs *fp)
+{
+ char buf [150];
printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
@@ -686,6 +707,8 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
printk(KERN_NOTICE " RETX: %s\n", buf);
decode_address(buf, fp->rets);
printk(KERN_NOTICE " RETS: %s\n", buf);
+ decode_address(buf, fp->pc);
+ printk(KERN_NOTICE " PC: %s\n", buf);
if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
@@ -800,7 +823,9 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
- dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_process(fp);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
dump_stack();
panic("Unrecoverable event\n");
}
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index bfdad52c570..635288fc5f5 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -4,7 +4,7 @@
lib-y := \
ashldi3.o ashrdi3.o lshrdi3.o \
- muldi3.o divsi3.o udivsi3.o udivdi3.o modsi3.o umodsi3.o \
+ muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \
strcmp.o strcpy.o strncmp.o strncpy.o \
umulsi3_highpart.o smulsi3_highpart.o \
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index a17cc77ac36..df7b8833a0c 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -77,3 +77,22 @@ ENTRY(_insb)
sti R3;
RTS;
ENDPROC(_insb)
+
+
+
+ENTRY(_insl_16)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s: R0 = [P0];
+ W[P1++] = R0;
+ R0 = R0 >> 16;
+ W[P1++] = R0;
+ NOP;
+.Llong16_loop_e: NOP;
+ sti R3;
+ RTS;
+ENDPROC(_insl_16)
diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c
index 4eeefd86907..fde39a1950c 100644
--- a/arch/blackfin/lib/strcmp.c
+++ b/arch/blackfin/lib/strcmp.c
@@ -1,10 +1,19 @@
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strcmp __inline_strcmp
#include <asm/string.h>
#undef strcmp
+#include <linux/module.h>
+
int strcmp(const char *dest, const char *src)
{
return __inline_strcmp(dest, src);
}
+EXPORT_SYMBOL(strcmp);
diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c
index 534589db725..2a8836b1f4d 100644
--- a/arch/blackfin/lib/strcpy.c
+++ b/arch/blackfin/lib/strcpy.c
@@ -1,10 +1,19 @@
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strcpy __inline_strcpy
#include <asm/string.h>
#undef strcpy
+#include <linux/module.h>
+
char *strcpy(char *dest, const char *src)
{
return __inline_strcpy(dest, src);
}
+EXPORT_SYMBOL(strcpy);
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
index d791f120bff..2aaae78a68e 100644
--- a/arch/blackfin/lib/strncmp.c
+++ b/arch/blackfin/lib/strncmp.c
@@ -1,10 +1,19 @@
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strncmp __inline_strncmp
#include <asm/string.h>
#undef strncmp
+#include <linux/module.h>
+
int strncmp(const char *cs, const char *ct, size_t count)
{
return __inline_strncmp(cs, ct, count);
}
+EXPORT_SYMBOL(strncmp);
diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c
index 1fecb5c71ff..ea1dc6bf237 100644
--- a/arch/blackfin/lib/strncpy.c
+++ b/arch/blackfin/lib/strncpy.c
@@ -1,10 +1,19 @@
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strncpy __inline_strncpy
#include <asm/string.h>
#undef strncpy
+#include <linux/module.h>
+
char *strncpy(char *dest, const char *src, size_t n)
{
return __inline_strncpy(dest, src, n);
}
+EXPORT_SYMBOL(strncpy);
diff --git a/arch/blackfin/lib/udivdi3.S b/arch/blackfin/lib/udivdi3.S
deleted file mode 100644
index ad1ebee675e..00000000000
--- a/arch/blackfin/lib/udivdi3.S
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * udivdi3.S - unsigned long long division
- *
- * Copyright 2003-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPLv2 or later.
- */
-
-#include <linux/linkage.h>
-
-#define CARRY AC0
-
-#ifdef CONFIG_ARITHMETIC_OPS_L1
-.section .l1.text
-#else
-.text
-#endif
-
-
-ENTRY(___udivdi3)
- R3 = [SP + 12];
- [--SP] = (R7:4, P5:3);
-
- /* Attempt to use divide primitive first; these will handle
- ** most cases, and they're quick - avoids stalls incurred by
- ** testing for identities.
- */
-
- R4 = R2 | R3;
- CC = R4 == 0;
- IF CC JUMP .LDIV_BY_ZERO;
-
- R4.H = 0x8000;
- R4 >>>= 16; // R4 now 0xFFFF8000
- R5 = R0 | R2; // If either dividend or
- R4 = R5 & R4; // divisor have bits in
- CC = R4; // top half or low half's sign
- IF CC JUMP .LIDENTS; // bit, skip builtins.
- R4 = R1 | R3; // Also check top halves
- CC = R4;
- IF CC JUMP .LIDENTS;
-
- /* Can use the builtins. */
-
- AQ = CC; // Clear AQ (CC==0)
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- R0 = R0.L (Z);
- R1 = 0;
- (R7:4, P5:3) = [SP++];
- RTS;
-
-.LIDENTS:
- /* Test for common identities. Value to be returned is
- ** placed in R6,R7.
- */
- // Check for 0/y, return 0
- R4 = R0 | R1;
- CC = R4 == 0;
- IF CC JUMP .LRETURN_R0;
-
- // Check for x/x, return 1
- R6 = R0 - R2; // If x == y, then both R6 and R7 will be zero
- R7 = R1 - R3;
- R4 = R6 | R7; // making R4 zero.
- R6 += 1; // which would now make R6:R7==1.
- CC = R4 == 0;
- IF CC JUMP .LRETURN_IDENT;
-
- // Check for x/1, return x
- R6 = R0;
- R7 = R1;
- CC = R3 == 0;
- IF !CC JUMP .Lnexttest;
- CC = R2 == 1;
- IF CC JUMP .LRETURN_IDENT;
-
-.Lnexttest:
- R4.L = ONES R2; // check for div by power of two which
- R5.L = ONES R3; // can be done using a shift
- R6 = PACK (R5.L, R4.L);
- CC = R6 == 1;
- IF CC JUMP .Lpower_of_two_upper_zero;
- R6 = PACK (R4.L, R5.L);
- CC = R6 == 1;
- IF CC JUMP .Lpower_of_two_lower_zero;
-
- // Check for x < y, return 0
- R6 = 0;
- R7 = R6;
- CC = R1 < R3 (IU);
- IF CC JUMP .LRETURN_IDENT;
- CC = R1 == R3;
- IF !CC JUMP .Lno_idents;
- CC = R0 < R2 (IU);
- IF CC JUMP .LRETURN_IDENT;
-
-.Lno_idents: // Idents don't match. Go for the full operation
-
-
- // If X, or X and Y have high bit set, it'll affect the
- // results, so shift right one to stop this. Note: we've already
- // checked that X >= Y, so Y's msb won't be set unless X's
- // is.
-
- R4 = 0;
- CC = R1 < 0;
- IF !CC JUMP .Lx_msb_clear;
- CC = !CC; // 1 -> 0;
- R1 = ROT R1 BY -1; // Shift X >> 1
- R0 = ROT R0 BY -1; // lsb -> CC
- BITSET(R4,31); // to record only x msb was set
- CC = R3 < 0;
- IF !CC JUMP .Ly_msb_clear;
- CC = !CC;
- R3 = ROT R3 BY -1; // Shift Y >> 1
- R2 = ROT R2 BY -1;
- BITCLR(R4,31); // clear bit to record only x msb was set
-
-.Ly_msb_clear:
-.Lx_msb_clear:
- // Bit 31 in R4 indicates X msb set, but Y msb wasn't, and no bits
- // were lost, so we should shift result left by one.
-
- [--SP] = R4; // save for later
-
- // In the loop that follows, each iteration we add
- // either Y' or -Y' to the Remainder. We compute the
- // negated Y', and store, for convenience. Y' goes
- // into P0:P1, while -Y' goes into P2:P3.
-
- P0 = R2;
- P1 = R3;
- R2 = -R2;
- CC = CARRY;
- CC = !CC;
- R4 = CC;
- R3 = -R3;
- R3 = R3 - R4;
-
- R6 = 0; // remainder = 0
- R7 = R6;
-
- [--SP] = R2; P2 = SP;
- [--SP] = R3; P3 = SP;
- [--SP] = R6; P5 = SP; // AQ = 0
- [--SP] = P1;
-
- /* In the loop that follows, we use the following
- ** register assignments:
- ** R0,R1 X, workspace
- ** R2,R3 Y, workspace
- ** R4,R5 partial Div
- ** R6,R7 partial remainder
- ** P5 AQ
- ** The remainder and div form a 128-bit number, with
- ** the remainder in the high 64-bits.
- */
- R4 = R0; // Div = X'
- R5 = R1;
- R3 = 0;
-
- P4 = 64; // Iterate once per bit
- LSETUP(.LULST,.LULEND) LC0 = P4;
-.LULST:
- /* Shift Div and remainder up by one. The bit shifted
- ** out of the top of the quotient is shifted into the bottom
- ** of the remainder.
- */
- CC = R3;
- R4 = ROT R4 BY 1;
- R5 = ROT R5 BY 1 || // low q to high q
- R2 = [P5]; // load saved AQ
- R6 = ROT R6 BY 1 || // high q to low r
- R0 = [P2]; // load -Y'
- R7 = ROT R7 BY 1 || // low r to high r
- R1 = [P3];
-
- // Assume add -Y'
- CC = R2 < 0; // But if AQ is set...
- IF CC R0 = P0; // then add Y' instead
- IF CC R1 = P1;
-
- R6 = R6 + R0; // Rem += (Y' or -Y')
- CC = CARRY;
- R0 = CC;
- R7 = R7 + R1;
- R7 = R7 + R0 (NS) ||
- R1 = [SP];
- // Set the next AQ bit
- R1 = R7 ^ R1; // from Remainder and Y'
- R1 = R1 >> 31 || // Negate AQ's value, and
- [P5] = R1; // save next AQ
- BITTGL(R1, 0); // add neg AQ to the Div
-.LULEND: R4 = R4 + R1;
-
- R6 = [SP + 16];
-
- R0 = R4;
- R1 = R5;
- CC = BITTST(R6,30); // Just set CC=0
- R4 = ROT R0 BY 1; // but if we had to shift X,
- R5 = ROT R1 BY 1; // and didn't shift any bits out,
- CC = BITTST(R6,31); // then the result will be half as
- IF CC R0 = R4; // much as required, so shift left
- IF CC R1 = R5; // one space.
-
- SP += 20;
- (R7:4, P5:3) = [SP++];
- RTS;
-
-.Lpower_of_two:
- /* Y has a single bit set, which means it's a power of two.
- ** That means we can perform the division just by shifting
- ** X to the right the appropriate number of bits
- */
-
- /* signbits returns the number of sign bits, minus one.
- ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
- ** to shift right n-signbits spaces. It also means 0x80000000
- ** is a special case, because that *also* gives a signbits of 0
- */
-.Lpower_of_two_lower_zero:
- R7 = 0;
- R6 = R1 >> 31;
- CC = R3 < 0;
- IF CC JUMP .LRETURN_IDENT;
-
- R2.L = SIGNBITS R3;
- R2 = R2.L (Z);
- R2 += -62;
- (R7:4, P5:3) = [SP++];
- JUMP ___lshftli;
-
-.Lpower_of_two_upper_zero:
- CC = R2 < 0;
- IF CC JUMP .Lmaxint_shift;
-
- R2.L = SIGNBITS R2;
- R2 = R2.L (Z);
- R2 += -30;
- (R7:4, P5:3) = [SP++];
- JUMP ___lshftli;
-
-.Lmaxint_shift:
- R2 = -31;
- (R7:4, P5:3) = [SP++];
- JUMP ___lshftli;
-
-.LRETURN_IDENT:
- R0 = R6;
- R1 = R7;
-.LRETURN_R0:
- (R7:4, P5:3) = [SP++];
- RTS;
-.LDIV_BY_ZERO:
- R0 = ~R2;
- R1 = R0;
- (R7:4, P5:3) = [SP++];
- RTS;
-
-ENDPROC(___udivdi3)
-
-
-ENTRY(___lshftli)
- CC = R2 == 0;
- IF CC JUMP .Lfinished; // nothing to do
- CC = R2 < 0;
- IF CC JUMP .Lrshift;
- R3 = 64;
- CC = R2 < R3;
- IF !CC JUMP .Lretzero;
-
- // We're shifting left, and it's less than 64 bits, so
- // a valid result will be returned.
-
- R3 >>= 1; // R3 now 32
- CC = R2 < R3;
-
- IF !CC JUMP .Lzerohalf;
-
- // We're shifting left, between 1 and 31 bits, which means
- // some of the low half will be shifted into the high half.
- // Work out how much.
-
- R3 = R3 - R2;
-
- // Save that much data from the bottom half.
-
- P1 = R7;
- R7 = R0;
- R7 >>= R3;
-
- // Adjust both parts of the parameter.
-
- R0 <<= R2;
- R1 <<= R2;
-
- // And include the bits moved across.
-
- R1 = R1 | R7;
- R7 = P1;
- RTS;
-
-.Lzerohalf:
- // We're shifting left, between 32 and 63 bits, so the
- // bottom half will become zero, and the top half will
- // lose some bits. How many?
-
- R2 = R2 - R3; // N - 32
- R1 = LSHIFT R0 BY R2.L;
- R0 = R0 - R0;
- RTS;
-
-.Lretzero:
- R0 = R0 - R0;
- R1 = R0;
-.Lfinished:
- RTS;
-
-.Lrshift:
- // We're shifting right, but by how much?
- R2 = -R2;
- R3 = 64;
- CC = R2 < R3;
- IF !CC JUMP .Lretzero;
-
- // Shifting right less than 64 bits, so some result bits will
- // be retained.
-
- R3 >>= 1; // R3 now 32
- CC = R2 < R3;
- IF !CC JUMP .Lsignhalf;
-
- // Shifting right between 1 and 31 bits, so need to copy
- // data across words.
-
- P1 = R7;
- R3 = R3 - R2;
- R7 = R1;
- R7 <<= R3;
- R1 >>= R2;
- R0 >>= R2;
- R0 = R7 | R0;
- R7 = P1;
- RTS;
-
-.Lsignhalf:
- // Shifting right between 32 and 63 bits, so the top half
- // will become all zero-bits, and the bottom half is some
- // of the top half. But how much?
-
- R2 = R2 - R3;
- R0 = R1;
- R0 >>= R2;
- R1 = 0;
- RTS;
-
-ENDPROC(___lshftli)
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 50321f723de..5c736837d4b 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -1,5 +1,7 @@
if (BF52x)
+source "arch/blackfin/mach-bf527/boards/Kconfig"
+
menu "BF527 Specific Configuration"
comment "Alternative Multiplexing Scheme"
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
new file mode 100644
index 00000000000..6a570ad0374
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -0,0 +1,12 @@
+choice
+ prompt "System type"
+ default BFIN527_EZKIT
+ help
+ Select your board!
+
+config BFIN527_EZKIT
+ bool "BF527-EZKIT"
+ help
+ BF527-EZKIT-LITE board support.
+
+endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 912ac8ebc88..7277d35ef11 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -1,7 +1,5 @@
#
-# arch/blackfin/mach-bf532/boards/Makefile
+# arch/blackfin/mach-bf527/boards/Makefile
#
-obj-y += eth_mac.o
-obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
-
+obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
diff --git a/arch/blackfin/mach-bf527/boards/eth_mac.c b/arch/blackfin/mach-bf527/boards/eth_mac.c
deleted file mode 100644
index a725cc8a929..00000000000
--- a/arch/blackfin/mach-bf527/boards/eth_mac.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/blackfin/mach-bf537/board/eth_mac.c
- *
- * Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/module.h>
-#include <asm/blackfin.h>
-
-#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP)
-
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC 0x203f0000
-
-void get_bf537_ether_addr(char *addr)
-{
- unsigned int flash_mac = (unsigned int) FLASH_MAC;
- *(u32 *)(&(addr[0])) = bfin_read32(flash_mac);
- flash_mac += 4;
- *(u16 *)(&(addr[4])) = bfin_read16(flash_mac);
-}
-
-#else
-
-/*
- * Provide MAC address function for other specific board setting
- */
-void get_bf537_ether_addr(char *addr)
-{
- printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__);
-}
-
-#endif
-
-EXPORT_SYMBOL(get_bf537_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index bf1bedcc886..003e2ac654d 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -35,17 +35,18 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/nand.h>
+#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
@@ -450,6 +451,13 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -551,17 +559,29 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+ {
+ .modalias = "wm8731",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5,
+ .controller_data = &spi_wm8731_chip_info,
+ .mode = SPI_MODE_0,
+ },
+#endif
};
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
@@ -788,3 +808,14 @@ void native_machine_restart(char *cmd)
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
}
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC 0x203f0000
+void bfin_get_ether_addr(char *addr)
+{
+ *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+ *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
index 14297b3ed5c..76beb75f12d 100644
--- a/arch/blackfin/mach-bf533/Kconfig
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -1,5 +1,7 @@
if (BF533 || BF532 || BF531)
+source "arch/blackfin/mach-bf533/boards/Kconfig"
+
menu "BF533/2/1 Specific Configuration"
comment "Interrupt Priority Assignment"
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index b941550f956..6bcf4047f89 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -36,20 +36,21 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
*/
const char bfin_board_name[] = "HV Sistemas H8606";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE)
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
@@ -93,10 +94,6 @@ static struct resource smc91x_resources[] = {
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -269,6 +266,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
@@ -342,4 +340,4 @@ static int __init H8606_init(void)
return 0;
}
-arch_initcall(H8606_init); \ No newline at end of file
+arch_initcall(H8606_init);
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
new file mode 100644
index 00000000000..751de5110af
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -0,0 +1,34 @@
+choice
+ prompt "System type"
+ default BFIN533_STAMP
+ help
+ Select your board!
+
+config BFIN533_EZKIT
+ bool "BF533-EZKIT"
+ help
+ BF533-EZKIT-LITE board support.
+
+config BFIN533_STAMP
+ bool "BF533-STAMP"
+ help
+ BF533-STAMP board support.
+
+config BFIN533_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF533"
+ depends on (BF533)
+ help
+ CM-BF533 support for EVAL- and DEV-Board.
+
+config H8606_HVSISTEMAS
+ bool "HV Sistemas H8606"
+ depends on (BF532)
+ help
+ HV Sistemas H8606 board support.
+
+config GENERIC_BF533_BOARD
+ bool "Generic"
+ help
+ Generic or Custom board support.
+
+endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 2452b456ccb..54f57fb9791 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,7 @@
# arch/blackfin/mach-bf533/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index a863522a446..21df2f37549 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -33,11 +33,12 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -175,6 +176,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 34b63920e27..be852034a68 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -34,11 +34,12 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -187,6 +188,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
index 310b7772c45..e359a0d6467 100644
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ b/arch/blackfin/mach-bf533/boards/generic_board.c
@@ -58,10 +58,6 @@ static struct resource smc91x_resources[] = {
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 62ffa500420..8fde8d83285 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -35,13 +35,14 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -286,6 +287,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index e6648db0951..8255374c04a 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -1,5 +1,7 @@
if (BF537 || BF534 || BF536)
+source "arch/blackfin/mach-bf537/boards/Kconfig"
+
menu "BF537 Specific Configuration"
comment "Interrupt Priority Assignment"
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
new file mode 100644
index 00000000000..96a15196e41
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -0,0 +1,29 @@
+choice
+ prompt "System type"
+ default BFIN537_STAMP
+ help
+ Select your board!
+
+config BFIN537_STAMP
+ bool "BF537-STAMP"
+ help
+ BF537-STAMP board support.
+
+config BFIN537_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF537"
+ depends on (BF537)
+ help
+ CM-BF537 support for EVAL- and DEV-Board.
+
+config PNAV10
+ bool "PNAV board"
+ depends on (BF537)
+ help
+ PNAV board support.
+
+config GENERIC_BF537_BOARD
+ bool "Generic"
+ help
+ Generic or Custom board support.
+
+endchoice
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 23323cacc3a..94a85174283 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,8 +2,7 @@
# arch/blackfin/mach-bf537/boards/Makefile
#
-obj-y += eth_mac.o
-obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
-obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
-obj-$(CONFIG_PNAV10) += pnav10.o
+obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
+obj-$(CONFIG_PNAV10) += pnav10.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 2915931045e..c0fb06dbc42 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -34,11 +34,12 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -194,6 +195,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
@@ -425,3 +427,10 @@ static int __init cm_bf537_init(void)
}
arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/eth_mac.c b/arch/blackfin/mach-bf537/boards/eth_mac.c
deleted file mode 100644
index a725cc8a929..00000000000
--- a/arch/blackfin/mach-bf537/boards/eth_mac.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/blackfin/mach-bf537/board/eth_mac.c
- *
- * Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/module.h>
-#include <asm/blackfin.h>
-
-#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP)
-
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC 0x203f0000
-
-void get_bf537_ether_addr(char *addr)
-{
- unsigned int flash_mac = (unsigned int) FLASH_MAC;
- *(u32 *)(&(addr[0])) = bfin_read32(flash_mac);
- flash_mac += 4;
- *(u16 *)(&(addr[4])) = bfin_read16(flash_mac);
-}
-
-#else
-
-/*
- * Provide MAC address function for other specific board setting
- */
-void get_bf537_ether_addr(char *addr)
-{
- printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__);
-}
-
-#endif
-
-EXPORT_SYMBOL(get_bf537_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 255da7a9848..09f4bfbd235 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -35,7 +35,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
@@ -44,6 +44,7 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
@@ -502,7 +503,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
@@ -513,6 +514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
@@ -730,3 +732,10 @@ void native_machine_restart(char *cmd)
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
}
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 87b80892678..fd5f4a6f08e 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -35,11 +35,12 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
#include <linux/usb/sl811.h>
#include <linux/spi/ad7877.h>
@@ -295,7 +296,7 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 1,
+ .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
@@ -387,7 +388,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF2,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 5,
.controller_data = &spi_ad7877_chip_info,
},
@@ -413,6 +414,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
@@ -508,3 +510,10 @@ static int __init stamp_init(void)
}
arch_initcall(stamp_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 5f7b91fbafe..07b0dc273d2 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -35,7 +35,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
@@ -44,6 +44,7 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
@@ -182,6 +183,28 @@ static struct platform_device dm9000_device = {
};
#endif
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+static struct resource ax88180_resources[] = {
+ [0] = {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x8000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
+ },
+};
+
+static struct platform_device ax88180_device = {
+ .name = "ax88180",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ax88180_resources),
+ .resource = ax88180_resources,
+};
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
@@ -502,7 +525,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
@@ -513,6 +536,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
@@ -554,15 +578,20 @@ static struct platform_device bfin_fb_adv7393_device = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- }, {
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
},
+#endif
};
static struct platform_device bfin_uart_device = {
@@ -669,6 +698,10 @@ static struct platform_device *stamp_devices[] __initdata = {
&dm9000_device,
#endif
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+ &ax88180_device,
+#endif
+
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mac_device,
#endif
@@ -730,3 +763,14 @@ void native_machine_restart(char *cmd)
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
}
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC 0x203f0000
+void bfin_get_ether_addr(char *addr)
+{
+ *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+ *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index 08d8dc83701..d8bd3b49f15 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -1,5 +1,7 @@
if (BF54x)
+source "arch/blackfin/mach-bf548/boards/Kconfig"
+
menu "BF548 Specific Configuration"
config DEB_DMA_URGENT
diff --git a/arch/blackfin/mach-bf548/boards/Kconfig b/arch/blackfin/mach-bf548/boards/Kconfig
new file mode 100644
index 00000000000..05712906403
--- /dev/null
+++ b/arch/blackfin/mach-bf548/boards/Kconfig
@@ -0,0 +1,12 @@
+choice
+ prompt "System type"
+ default BFIN548_EZKIT
+ help
+ Select your board!
+
+config BFIN548_EZKIT
+ bool "BF548-EZKIT"
+ help
+ BFIN548-EZKIT board support.
+
+endchoice
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index 486e07c99a5..a444cc73957 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,4 +2,4 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
-obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 6b6490e66b3..d37d6653c4b 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -42,6 +42,7 @@
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
+#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
@@ -377,7 +378,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 1,
+ .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
@@ -453,9 +454,10 @@ static struct resource bfin_spi1_resource[] = {
};
/* SPI controller data */
-static struct bfin5xx_spi_master bf54x_spi_master_info = {
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bf54x_spi_master0 = {
@@ -464,17 +466,23 @@ static struct platform_device bf54x_spi_master0 = {
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
.dev = {
- .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
},
};
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
static struct platform_device bf54x_spi_master1 = {
.name = "bfin-spi",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
.resource = bfin_spi1_resource,
.dev = {
- .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -500,6 +508,7 @@ static struct platform_device i2c_bfin_twi0_device = {
.resource = bfin_twi0_resource,
};
+#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct resource bfin_twi1_resource[] = {
[0] = {
.start = TWI1_REGBASE,
@@ -520,6 +529,7 @@ static struct platform_device i2c_bfin_twi1_device = {
.resource = bfin_twi1_resource,
};
#endif
+#endif
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
@@ -569,8 +579,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
&i2c_bfin_twi0_device,
+#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
+#endif
};
static int __init stamp_init(void)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 3071c243d42..74b34c7f362 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -158,6 +158,27 @@ ENTRY(__stext)
w[p2] = r0;
ssync;
+ p2.h = hi(EBIU_MBSCTL);
+ p2.l = lo(EBIU_MBSCTL);
+ r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
+ r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_MODE);
+ p2.l = lo(EBIU_MODE);
+ r0.h = hi(CONFIG_EBIU_MODEVAL);
+ r0.l = lo(CONFIG_EBIU_MODEVAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_FCTL);
+ p2.l = lo(EBIU_FCTL);
+ r0.h = hi(CONFIG_EBIU_FCTLVAL);
+ r0.l = lo(CONFIG_EBIU_FCTLVAL);
+ [p2] = r0;
+ ssync;
+
/* This section keeps the processor in supervisor mode
* during kernel boot. Switches to user mode at end of boot.
* See page 3-9 of Hardware Reference manual for documentation.
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
index 0a17c4cf005..3f4895450be 100644
--- a/arch/blackfin/mach-bf561/Kconfig
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -1,4 +1,6 @@
-if BF561
+if (BF561)
+
+source "arch/blackfin/mach-bf561/boards/Kconfig"
menu "BF561 Specific Configuration"
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
new file mode 100644
index 00000000000..e41a67b1fb5
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -0,0 +1,27 @@
+choice
+ prompt "System type"
+ default BFIN561_EZKIT
+ help
+ Select your board!
+
+config BFIN561_EZKIT
+ bool "BF561-EZKIT"
+ help
+ BF561-EZKIT-LITE board support.
+
+config BFIN561_TEPLA
+ bool "BF561-TEPLA"
+ help
+ BF561-TEPLA board support.
+
+config BFIN561_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF561"
+ help
+ CM-BF561 support for EVAL- and DEV-Board.
+
+config GENERIC_BF561_BOARD
+ bool "Generic"
+ help
+ Generic or Custom board support.
+
+endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 495a1cf9d45..04add010b56 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,7 @@
# arch/blackfin/mach-bf561/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 97aeb43fd8b..c19cd29b948 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -33,11 +33,12 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -182,6 +183,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 059d516cec2..4ff8f6e7a11 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -35,6 +35,7 @@
#include <linux/pata_platform.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -115,6 +116,28 @@ static struct platform_device smc91x_device = {
};
#endif
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+static struct resource ax88180_resources[] = {
+ [0] = {
+ .start = 0x2c000000,
+ .end = 0x2c000000 + 0x8000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
+ },
+};
+
+static struct platform_device ax88180_device = {
+ .name = "ax88180",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ax88180_resources),
+ .resource = ax88180_resources,
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
@@ -160,6 +183,7 @@ static struct resource bfin_spi0_resource[] = {
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
@@ -226,6 +250,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
+
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+ &ax88180_device,
+#endif
+
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
index 46816be4b2b..fc80c5d059f 100644
--- a/arch/blackfin/mach-bf561/boards/generic_board.c
+++ b/arch/blackfin/mach-bf561/boards/generic_board.c
@@ -48,10 +48,6 @@ static struct resource smc91x_resources[] = {
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 4a17c6da2a5..ec6a2207c20 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -31,10 +31,6 @@ static struct resource smc91x_resources[] = {
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c
index 785ca981697..a4f0b428a34 100644
--- a/arch/blackfin/mach-common/cplbinfo.c
+++ b/arch/blackfin/mach-common/cplbinfo.c
@@ -91,7 +91,7 @@ static char *cplb_print_entry(char *buf, int type)
} else
buf += sprintf(buf, "Data CPLB entry:\n");
- buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\n\tiCount\toCount\n");
+ buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n");
while (*p_addr != 0xffffffff) {
entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S
index 946703ef48f..6f909cbfac7 100644
--- a/arch/blackfin/mach-common/cplbmgr.S
+++ b/arch/blackfin/mach-common/cplbmgr.S
@@ -73,7 +73,7 @@ ENTRY(_cplb_mgr)
/* ICPLB Miss Exception. We need to choose one of the
* currently-installed CPLBs, and replace it with one
* from the configuration table.
- */
+ */
P4.L = LO(ICPLB_FAULT_ADDR);
P4.H = HI(ICPLB_FAULT_ADDR);
@@ -222,7 +222,7 @@ ENTRY(_cplb_mgr)
/* See if failed address > start address */
CC = R4 <= R0(IU);
- IF !CC JUMP .Linext;
+ IF !CC JUMP .Linext;
/* extract page size (17:16)*/
R3 = EXTRACT(R2, R1.L) (Z);
@@ -271,16 +271,27 @@ ENTRY(_cplb_mgr)
/* FAILED CASES*/
.Lno_page_in_table:
- ( R7:4,P5:3 ) = [SP++];
R0 = CPLB_NO_ADDR_MATCH;
- RTS;
+ JUMP .Lfail_ret;
+
.Lall_locked:
- ( R7:4,P5:3 ) = [SP++];
R0 = CPLB_NO_UNLOCKED;
- RTS;
+ JUMP .Lfail_ret;
+
.Lprot_violation:
- ( R7:4,P5:3 ) = [SP++];
R0 = CPLB_PROT_VIOL;
+
+.Lfail_ret:
+ /* Make sure we turn protection/cache back on, even in the failing case */
+ BITSET(R5,ENICPLB_P);
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:4,P5:3 ) = [SP++];
RTS;
.Ldcplb_write:
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 1b13fa47097..dc9d3ee2e69 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -33,7 +33,7 @@
* after a timer-interrupt and after each system call.
*/
-
+#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/unistd.h>
#include <asm/blackfin.h>
@@ -71,25 +71,44 @@ ENDPROC(_safe_speculative_execution)
* This one does not lower the level to IRQ5, and thus can be used to
* patch up CPLB misses on the kernel stack.
*/
-ENTRY(_ex_dcplb)
#if ANOMALY_05000261
+#define _ex_dviol _ex_workaround_261
+#define _ex_dmiss _ex_workaround_261
+#define _ex_dmult _ex_workaround_261
+
+ENTRY(_ex_workaround_261)
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
* handle it.
*/
+ P4 = R7; /* Store EXCAUSE */
p5.l = _last_cplb_fault_retx;
p5.h = _last_cplb_fault_retx;
r7 = [p5];
r6 = retx;
[p5] = r6;
cc = r6 == r7;
- if !cc jump _return_from_exception;
+ if !cc jump _bfin_return_from_exception;
/* fall through */
+ R7 = P4;
+ R6 = 0x26; /* Data CPLB Miss */
+ cc = R6 == R7;
+ if cc jump _ex_dcplb_miss (BP);
+ /* Handle 0x23 Data CPLB Protection Violation
+ * and Data CPLB Multiple Hits - Linux Trap Zero
+ */
+ jump _ex_trap_c;
+ENDPROC(_ex_workaround_261)
+
+#else
+#define _ex_dviol _ex_trap_c
+#define _ex_dmiss _ex_dcplb_miss
+#define _ex_dmult _ex_trap_c
#endif
-ENDPROC(_ex_dcplb)
-ENTRY(_ex_icplb)
+ENTRY(_ex_dcplb_miss)
+ENTRY(_ex_icplb_miss)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SAVE_ALL_SYS
@@ -98,7 +117,7 @@ ENTRY(_ex_icplb)
RESTORE_ALL_SYS
SP = EX_SCRATCH_REG;
rtx;
-ENDPROC(_ex_icplb)
+ENDPROC(_ex_icplb_miss)
ENTRY(_ex_syscall)
DEBUG_START_HWTRACE(p5, r7)
@@ -120,7 +139,7 @@ ENTRY(_ex_single_step)
r7 = retx;
r6 = reti;
cc = r7 == r6;
- if cc jump _return_from_exception
+ if cc jump _bfin_return_from_exception
r7 = syscfg;
bitclr (r7, 0);
syscfg = R7;
@@ -137,8 +156,9 @@ ENTRY(_ex_single_step)
r7 = [p4];
cc = r6 == r7;
if !cc jump _ex_trap_c;
+ENDPROC(_ex_single_step)
-ENTRY(_return_from_exception)
+ENTRY(_bfin_return_from_exception)
DEBUG_START_HWTRACE(p5, r7)
#if ANOMALY_05000257
R7=LC0;
@@ -150,7 +170,7 @@ ENTRY(_return_from_exception)
ASTAT = [sp++];
sp = EX_SCRATCH_REG;
rtx;
-ENDPROC(_ex_soft_bp)
+ENDPROC(_bfin_return_from_exception)
ENTRY(_handle_bad_cplb)
/* To get here, we just tried and failed to change a CPLB
@@ -843,7 +863,7 @@ ENTRY(_ex_trace_buff_full)
LC0 = [sp++];
P2 = [sp++];
P3 = [sp++];
- jump _return_from_exception;
+ jump _bfin_return_from_exception;
ENDPROC(_ex_trace_buff_full)
#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
@@ -861,7 +881,7 @@ ENTRY(_software_trace_buff)
#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
#if CONFIG_EARLY_PRINTK
-.section .init.text
+__INIT
ENTRY(_early_trap)
SAVE_ALL_SYS
trace_buffer_stop(p0,r0);
@@ -896,6 +916,7 @@ ENTRY(_early_trap)
call _early_trap_c;
SP += 12;
ENDPROC(_early_trap)
+__FINIT
#endif /* CONFIG_EARLY_PRINTK */
/*
@@ -908,6 +929,7 @@ ENDPROC(_early_trap)
#else
.data
#endif
+
ENTRY(_ex_table)
/* entry for each EXCAUSE[5:0]
* This table must be in sync with the table in ./kernel/traps.c
@@ -952,16 +974,16 @@ ENTRY(_ex_table)
.long _ex_trap_c /* 0x20 - Reserved */
.long _ex_trap_c /* 0x21 - Undefined Instruction */
.long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
- .long _ex_dcplb /* 0x23 - Data CPLB Protection Violation */
+ .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */
.long _ex_trap_c /* 0x24 - Data access misaligned */
.long _ex_trap_c /* 0x25 - Unrecoverable Event */
- .long _ex_dcplb /* 0x26 - Data CPLB Miss */
- .long _ex_trap_c /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
+ .long _ex_dmiss /* 0x26 - Data CPLB Miss */
+ .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
.long _ex_trap_c /* 0x28 - Emulation Watchpoint */
.long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
.long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
- .long _ex_icplb /* 0x2B - Instruction CPLB protection Violation */
- .long _ex_icplb /* 0x2C - Instruction CPLB miss */
+ .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */
+ .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */
.long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
.long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
.long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index c6b32fe0f6e..4de376418a1 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -30,7 +30,6 @@
#include <asm/blackfin.h>
#include <asm/mach/irq.h>
-#include <linux/autoconf.h>
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index c2f05fabedc..4882f0e801a 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -181,7 +181,6 @@ static struct irq_chip bf561_internal_irqchip = {
.unmask = bf561_internal_unmask_irq,
};
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -362,8 +361,6 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq,
}
-#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
-
void __init init_exception_vectors(void)
{
SSYNC();
@@ -413,26 +410,21 @@ int __init init_arch_irq(void)
set_irq_chip(irq, &bf561_core_irqchip);
else
set_irq_chip(irq, &bf561_internal_irqchip);
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+
if ((irq != IRQ_PROG0_INTA) &&
- (irq != IRQ_PROG1_INTA) && (irq != IRQ_PROG2_INTA)) {
-#endif
+ (irq != IRQ_PROG1_INTA) &&
+ (irq != IRQ_PROG2_INTA))
set_irq_handler(irq, handle_simple_irq);
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
- } else {
+ else
set_irq_chained_handler(irq, bf561_demux_gpio_irq);
- }
-#endif
-
}
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
set_irq_chip(irq, &bf561_gpio_irqchip);
/* if configured as edge, then will be changed to do_edge_IRQ */
set_irq_handler(irq, handle_level_irq);
}
-#endif
+
bfin_write_IMASK(0);
CSYNC();
ilat = bfin_read_ILAT();
@@ -457,9 +449,8 @@ int __init init_arch_irq(void)
}
#ifdef CONFIG_DO_IRQ_L1
-void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+__attribute__((l1_text))
#endif
-
void do_irq(int vec, struct pt_regs *fp)
{
if (vec == EVT_IVTMR_P) {
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 2d2b63567b3..147f0731087 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -308,7 +308,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
}
#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
-#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x)
+#if !defined(CONFIG_BF54x)
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -464,7 +464,7 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
}
}
-#else /* CONFIG_IRQCHIP_DEMUX_GPIO */
+#else /* CONFIG_BF54x */
#define NR_PINT_SYS_IRQS 4
#define NR_PINT_BITS 32
@@ -726,7 +726,7 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
}
}
-#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+#endif
void __init init_exception_vectors(void)
{
@@ -766,10 +766,10 @@ int __init init_arch_irq(void)
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-#ifdef CONFIG_BF54x
+# ifdef CONFIG_BF54x
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-#endif
+# endif
#else
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
bfin_write_SIC_IWR(IWR_ENABLE_ALL);
@@ -778,13 +778,13 @@ int __init init_arch_irq(void)
local_irq_disable();
-#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
-#ifdef CONFIG_PINTx_REASSIGN
+#ifdef CONFIG_BF54x
+# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
pint[1]->assign = CONFIG_PINT1_ASSIGN;
pint[2]->assign = CONFIG_PINT2_ASSIGN;
pint[3]->assign = CONFIG_PINT3_ASSIGN;
-#endif
+# endif
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
init_pint_lut();
#endif
@@ -799,18 +799,17 @@ int __init init_arch_irq(void)
#endif
switch (irq) {
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#if defined(CONFIG_BF53x)
case IRQ_PROG_INTA:
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
break;
-#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
case IRQ_MAC_RX:
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
break;
-#endif
+# endif
#elif defined(CONFIG_BF54x)
case IRQ_PINT0:
set_irq_chained_handler(irq,
@@ -842,7 +841,6 @@ int __init init_arch_irq(void)
bfin_demux_gpio_irq);
break;
#endif
-#endif
default:
set_irq_handler(irq, handle_simple_irq);
break;
@@ -861,7 +859,6 @@ int __init init_arch_irq(void)
}
#endif
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#ifndef CONFIG_BF54x
for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
#else
@@ -871,7 +868,7 @@ int __init init_arch_irq(void)
/* if configured as edge, then will be changed to do_edge_IRQ */
set_irq_handler(irq, handle_level_irq);
}
-#endif
+
bfin_write_IMASK(0);
CSYNC();
ilat = bfin_read_ILAT();
@@ -896,9 +893,8 @@ int __init init_arch_irq(void)
}
#ifdef CONFIG_DO_IRQ_L1
-void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text));
+__attribute__((l1_text))
#endif
-
void do_irq(int vec, struct pt_regs *fp)
{
if (vec == EVT_IVTMR_P) {
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
index f05e3dadaf3..b22959b197e 100644
--- a/arch/blackfin/mach-common/irqpanic.c
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -153,27 +153,29 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs)
case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG HWC_x2);
+ printk(KERN_EMERG HWC_x2(KERN_EMERG));
break;
case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */
info.si_code = BUS_ADRERR;
sig = SIGBUS;
- printk(KERN_EMERG HWC_x3);
+ printk(KERN_EMERG HWC_x3(KERN_EMERG));
break;
case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */
- printk(KERN_EMERG HWC_x12);
+ printk(KERN_EMERG HWC_x12(KERN_EMERG));
break;
case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */
- printk(KERN_EMERG HWC_x18);
+ printk(KERN_EMERG HWC_x18(KERN_EMERG));
break;
default: /* Reserved */
- printk(KERN_EMERG HWC_default);
+ printk(KERN_EMERG HWC_default(KERN_EMERG));
break;
}
}
regs->ipend = bfin_read_IPEND();
- dump_bfin_regs(regs, (void *)regs->pc);
+ dump_bfin_process(regs);
+ dump_bfin_mem((void *)regs->pc);
+ show_regs(regs);
if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */
panic("Unhandled IRQ or exceptions!\n");
else { /* in userspace */
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index b99ea883cd2..e41f0e8ecac 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -27,7 +27,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/autoconf.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>