aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/cris/arch-v10/boot/Makefile1
-rw-r--r--arch/cris/arch-v10/boot/compressed/Makefile14
-rw-r--r--arch/cris/arch-v10/boot/compressed/decompress.ld3
-rw-r--r--arch/cris/arch-v10/boot/compressed/head.S98
-rw-r--r--arch/cris/arch-v10/boot/compressed/misc.c144
-rw-r--r--arch/cris/arch-v10/boot/rescue/Makefile9
-rw-r--r--arch/cris/arch-v10/drivers/pcf8563.c2
-rw-r--r--arch/cris/arch-v10/kernel/debugport.c20
-rw-r--r--arch/cris/arch-v32/boot/Makefile1
-rw-r--r--arch/cris/arch-v32/boot/compressed/Makefile6
-rw-r--r--arch/cris/arch-v32/boot/rescue/Makefile3
-rw-r--r--arch/cris/arch-v32/drivers/pcf8563.c2
-rw-r--r--arch/ia64/hp/sim/simserial.c46
-rw-r--r--arch/m68k/Kconfig36
-rw-r--r--arch/m68k/Makefile2
-rw-r--r--arch/m68k/amiga/config.c22
-rw-r--r--arch/m68k/atari/debug.c37
-rw-r--r--arch/m68k/fpsp040/Makefile1
-rw-r--r--arch/m68k/ifpsp060/Makefile1
-rw-r--r--arch/m68k/kernel/Makefile2
-rw-r--r--arch/m68k/kernel/setup.c9
-rw-r--r--arch/m68k/kernel/vmlinux-std.lds3
-rw-r--r--arch/m68k/kernel/vmlinux-sun3.lds7
-rw-r--r--arch/m68k/lib/Makefile2
-rw-r--r--arch/m68k/mac/Makefile2
-rw-r--r--arch/m68k/mac/baboon.c26
-rw-r--r--arch/m68k/mac/bootparse.c122
-rw-r--r--arch/m68k/mac/config.c11
-rw-r--r--arch/m68k/mac/debug.c41
-rw-r--r--arch/m68k/mac/oss.c8
-rw-r--r--arch/m68k/mac/psc.c4
-rw-r--r--arch/m68k/mac/via.c2
-rw-r--r--arch/m68k/math-emu/Makefile2
-rw-r--r--arch/m68k/mm/motorola.c1
-rw-r--r--arch/m68k/mm/sun3mmu.c1
-rw-r--r--arch/m68k/q40/config.c26
-rw-r--r--arch/m68k/sun3/Makefile2
-rw-r--r--arch/m68k/sun3/config.c7
-rw-r--r--arch/m68k/sun3/dvma.c2
-rw-r--r--arch/m68k/sun3/idprom.c4
-rw-r--r--arch/m68k/sun3/mmu_emu.c2
-rw-r--r--arch/m68k/sun3/prom/Makefile1
-rw-r--r--arch/m68k/sun3/prom/console.c6
-rw-r--r--arch/m68k/sun3/prom/init.c11
-rw-r--r--arch/m68k/sun3/prom/misc.c2
-rw-r--r--arch/m68k/sun3/prom/printf.c7
-rw-r--r--arch/m68k/sun3/sbus.c27
-rw-r--r--arch/m68k/sun3/sun3dvma.c2
-rw-r--r--arch/m68k/sun3/sun3ints.c2
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c2
50 files changed, 250 insertions, 544 deletions
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
index 20c83a53caf..21720301443 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -2,7 +2,6 @@
# arch/cris/arch-v10/boot/Makefile
#
-OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss
subdir- := compressed rescue
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 4a031cb27eb..08d943ce4be 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -2,12 +2,10 @@
# arch/cris/arch-v10/boot/compressed/Makefile
#
-CC = gcc-cris -melf $(LINUXINCLUDE)
-ccflags-y += -O2
-LD = ld-cris
-ldflags-y += -T $(obj)/decompress.ld
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
@@ -21,12 +19,6 @@ $(obj)/decompress.o: $(OBJECTS) FORCE
$(obj)/decompress.bin: $(obj)/decompress.o FORCE
$(call if_changed,objcopy)
-$(obj)/head.o: $(obj)/head.S .config
- @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-
-$(obj)/misc.o: $(obj)/misc.c .config
- @$(CC) -D__KERNEL__ -c $< -o $@
-
$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(call if_changed,image)
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
index 0b0a14fe617..e80f4594d54 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -1,4 +1,5 @@
-OUTPUT_FORMAT(elf32-us-cris)
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
MEMORY
{
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
index 610bdb23755..981fbae8495 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -15,77 +15,77 @@
#define COMMAND_LINE_MAGIC 0x87109563
;; Exported symbols
-
- .globl _input_data
-
+ .globl input_data
+
+
.text
nop
di
;; We need to initialze DRAM registers before we start using the DRAM
-
- cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
+
+ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
beq dram_init_finished
nop
-
+
#include "../../lib/dram_init.S"
-
-dram_init_finished:
-
+
+dram_init_finished:
+
;; Initiate the PA and PB ports
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
- move.b r0, [R_PORT_PA_DATA]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
- move.b r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
- move.b r0, [R_PORT_PB_DATA]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
- move.b r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
;; Setup the stack to a suitably high address.
;; We assume 8 MB is the minimum DRAM in an eLinux
;; product and put the sp at the top for now.
- move.d 0x40800000, sp
+ move.d 0x40800000, $sp
;; Figure out where the compressed piggyback image is
;; in the flash (since we wont try to copy it to DRAM
;; before unpacking). It is at _edata, but in flash.
;; Use (_edata - basse) as offset to the current PC.
-
-basse: move.d pc, r5
- and.d 0x7fffffff, r5 ; strip any non-cache bit
- subq 2, r5 ; compensate for the move.d pc instr
- move.d r5, r0 ; save for later - flash address of 'basse'
- add.d _edata, r5
- sub.d basse, r5 ; r5 = flash address of '_edata'
-
+
+basse: move.d $pc, $r5
+ and.d 0x7fffffff, $r5 ; strip any non-cache bit
+ subq 2, $r5 ; compensate for the move.d $pc instr
+ move.d $r5, $r0 ; save for later - flash address of 'basse'
+ add.d _edata, $r5
+ sub.d basse, $r5 ; $r5 = flash address of '_edata'
+
;; Copy text+data to DRAM
-
- move.d basse, r1 ; destination
- move.d _edata, r2 ; end destination
-1: move.w [r0+], r3
- move.w r3, [r1+]
- cmp.d r2, r1
+
+ move.d basse, $r1 ; destination
+ move.d _edata, $r2 ; end destination
+1: move.w [$r0+], $r3
+ move.w $r3, [$r1+]
+ cmp.d $r2, $r1
bcs 1b
nop
- move.d r5, [_input_data] ; for the decompressor
+ move.d $r5, [input_data] ; for the decompressor
;; Clear the decompressors BSS (between _edata and _end)
-
- moveq 0, r0
- move.d _edata, r1
- move.d _end, r2
-1: move.w r0, [r1+]
- cmp.d r2, r1
+
+ moveq 0, $r0
+ move.d _edata, $r1
+ move.d _end, $r2
+1: move.w $r0, [$r1+]
+ cmp.d $r2, $r1
bcs 1b
nop
@@ -94,16 +94,16 @@ basse: move.d pc, r5
move.d $r10, [$r12]
move.d _cmd_line_addr, $r12
move.d $r11, [$r12]
-
- ;; Do the decompression and save compressed size in _inptr
- jsr _decompress_kernel
-
- ;; Put start address of root partition in r9 so the kernel can use it
+ ;; Do the decompression and save compressed size in inptr
+
+ jsr decompress_kernel
+
+ ;; Put start address of root partition in $r9 so the kernel can use it
;; when mounting from flash
- move.d [_input_data], r9 ; flash address of compressed kernel
- add.d [_inptr], r9 ; size of compressed kernel
+ move.d [input_data], $r9 ; flash address of compressed kernel
+ add.d [inptr], $r9 ; size of compressed kernel
;; Restore command line magic and address.
move.d _cmd_line_magic, $r10
@@ -112,12 +112,12 @@ basse: move.d pc, r5
move.d [$r11], $r11
;; Enter the decompressed kernel
- move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
+ move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
jump 0x40004000 ; kernel is linked to this address
-
+
.data
-_input_data:
+input_data:
.dword 0 ; used by the decompressor
_cmd_line_magic:
.dword 0
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 9a43ab19391..18e13bce140 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -29,12 +29,10 @@
#define OF(args) args
#define STATIC static
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
- size_t __n);
-
-#define memzero(s, n) memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
+#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
@@ -62,57 +60,69 @@ static unsigned outcnt = 0; /* bytes in output buffer */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
-#define get_byte() inbuf[inptr++]
-
+#define get_byte() (inbuf[inptr++])
+
/* Diagnostic functions */
#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Assert(cond, msg) do { \
+ if (!(cond)) \
+ error(msg); \
+ } while (0)
# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+# define Tracev(x) do { \
+ if (verbose) \
+ fprintf x; \
+ } while (0)
+# define Tracevv(x) do { \
+ if (verbose > 1) \
+ fprintf x; \
+ } while (0)
+# define Tracec(c, x) do { \
+ if (verbose && (c)) \
+ fprintf x; \
+ } while (0)
+# define Tracecv(c, x) do { \
+ if (verbose > 1 && (c)) \
+ fprintf x; \
+ } while (0)
#else
-# define Assert(cond,msg)
+# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
#endif
-static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
extern char *input_data; /* lives in head.S */
static long bytes_out = 0;
static uch *output_data;
static unsigned long output_ptr = 0;
-
+
static void *malloc(int size);
static void free(void *where);
-static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
-
+
static void puts(const char *);
/* the "heap" is put directly after the BSS ends, at end */
-
-extern int end;
-static long free_mem_ptr = (long)&end;
-
+
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+
#include "../../../../../lib/inflate.c"
static void *malloc(int size)
{
void *p;
- if (size <0) error("Malloc error");
+ if (size < 0)
+ error("Malloc error");
free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
@@ -142,44 +152,47 @@ static void
puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while(*s) {
+ while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
- while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+ while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
*R_SERIAL0_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
- while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+ while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
*R_SERIAL1_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
- while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+ while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
*R_SERIAL2_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
- while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+ while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
*R_SERIAL3_TR_DATA = *s++;
#endif
}
#endif
}
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
{
int i;
- char *ss = (char*)s;
+ char *ss = (char *)s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
- for (i=0;i<n;i++) ss[i] = c;
+ return s;
}
-void*
-memcpy(void* __dest, __const void* __src,
- size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
- for (i=0;i<__n;i++) d[i] = s[i];
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
+
+ return __dest;
}
/* ===========================================================================
@@ -187,46 +200,44 @@ memcpy(void* __dest, __const void* __src,
* (Used for the decompressed data only.)
*/
-static void
-flush_window()
+static void flush_window(void)
{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out = *in;
+ out++;
+ in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
}
-static void
-error(char *x)
+static void error(char *x)
{
puts("\n\n");
puts(x);
puts("\n\n -- System halted\n");
- while(1); /* Halt */
+ while (1); /* Halt */
}
-void
-setup_normal_output_buffer()
+void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
-void
-decompress_kernel()
+void decompress_kernel(void)
{
char revision;
-
+
/* input_data is set in head.S */
inbuf = input_data;
@@ -257,11 +268,10 @@ decompress_kernel()
makecrc();
- __asm__ volatile ("move vr,%0" : "=rm" (revision));
- if (revision < 10)
- {
+ __asm__ volatile ("move $vr,%0" : "=rm" (revision));
+ if (revision < 10) {
puts("You need an ETRAX 100LX to run linux 2.6\n");
- while(1);
+ while (1);
}
puts("Uncompressing Linux...\n");
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index 2e5045b9e19..07688da9270 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -2,12 +2,9 @@
# Makefile for rescue (bootstrap) code
#
-CC = gcc-cris -mlinux $(LINUXINCLUDE)
-ccflags-y += -O2
-asflags-y += -traditional
-LD = gcc-cris -mlinux -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
-OBJCOPY = objcopy-cris
+ccflags-y += -O2 $(LINUXINCLUDE)
+asflags-y += $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
OBJCOPYFLAGS = -O binary --remove-section=.bss
obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 52103d16dc6..8769dc91407 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -233,7 +233,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
if (copy_to_user((struct rtc_time *) arg, &tm,
sizeof tm)) {
- spin_unlock(&rtc_lock);
+ mutex_unlock(&rtc_lock);
return -EFAULT;
}
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 04d5eee2c90..3dc6e91ba39 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -426,12 +426,18 @@ static int dummy_write(struct tty_struct * tty,
return count;
}
-static int
-dummy_write_room(struct tty_struct *tty)
+static int dummy_write_room(struct tty_struct *tty)
{
return 8192;
}
+static const struct tty_operations dummy_ops = {
+ .open = dummy_open,
+ .close = dummy_close,
+ .write = dummy_write,
+ .write_room = dummy_write_room,
+};
+
void __init
init_dummy_console(void)
{
@@ -444,14 +450,14 @@ init_dummy_console(void)
dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
dummy_driver.subtype = SERIAL_TYPE_NORMAL;
dummy_driver.init_termios = tty_std_termios;
+ /* Normally B9600 default... */
dummy_driver.init_termios.c_cflag =
- B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+ B115200 | CS8 | CREAD | HUPCL | CLOCAL;
dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ dummy_driver.init_termios.c_ispeed = 115200;
+ dummy_driver.init_termios.c_ospeed = 115200;
- dummy_driver.open = dummy_open;
- dummy_driver.close = dummy_close;
- dummy_driver.write = dummy_write;
- dummy_driver.write_room = dummy_write_room;
+ dummy_driver.ops = &dummy_ops;
if (tty_register_driver(&dummy_driver))
panic("Couldn't register dummy serial driver\n");
}
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
index 3f91349c5f1..99896ad60b3 100644
--- a/arch/cris/arch-v32/boot/Makefile
+++ b/arch/cris/arch-v32/boot/Makefile
@@ -2,7 +2,6 @@
# arch/cris/arch-v32/boot/Makefile
#
-OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary -R .note -R .comment
subdir- := compressed rescue
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index 2c8c2c3039c..d6335f26083 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -2,14 +2,10 @@
# arch/cris/arch-v32/boot/compressed/Makefile
#
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/decompress.ld
-obj-y = head.o misc.o
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
index c0987795dcb..44ae0ad61f9 100644
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ b/arch/cris/arch-v32/boot/rescue/Makefile
@@ -7,9 +7,8 @@ ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-I $(srctree)/include/asm/arch
asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
LDPOSTFLAGS = -lgcc
-OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss
obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 53db3870ba0..f263ab57122 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -229,7 +229,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
if (copy_to_user((struct rtc_time *) arg, &tm,
sizeof tm)) {
- spin_unlock(&rtc_lock);
+ mutex_unlock(&rtc_lock);
return -EFAULT;
}
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 23cafc80d2a..24b1ad5334c 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -193,18 +193,6 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
* -------------------------------------------------------------------
*/
-#if 0
-/*
- * not really used in our situation so keep them commented out for now
- */
-static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
-static void do_serial_bh(void)
-{
- run_task_queue(&tq_serial);
- printk(KERN_ERR "do_serial_bh: called\n");
-}
-#endif
-
static void do_softint(struct work_struct *private_)
{
printk(KERN_ERR "simserial: do_softint called\n");
@@ -351,11 +339,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
info->xmit.head = info->xmit.tail = 0;
local_irq_restore(flags);
- wake_up_interruptible(&tty->write_wait);
-
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
+ tty_wakeup(tty);
}
/*
@@ -404,12 +388,6 @@ static void rs_unthrottle(struct tty_struct * tty)
printk(KERN_INFO "simrs_unthrottle called\n");
}
-/*
- * rs_break() --- routine which turns the break handling on or off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
@@ -422,14 +400,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
}
switch (cmd) {
- case TIOCMGET:
- printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
- return -EINVAL;
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
- return -EINVAL;
case TIOCGSERIAL:
printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
return 0;
@@ -488,14 +458,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- unsigned int cflag = tty->termios->c_cflag;
-
- if ( (cflag == old_termios->c_cflag)
- && ( RELEVANT_IFLAG(tty->termios->c_iflag)
- == RELEVANT_IFLAG(old_termios->c_iflag)))
- return;
-
-
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
@@ -623,9 +585,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
* the line discipline to only process XON/XOFF characters.
*/
shutdown(info);
- if (tty->ops->flush_buffer)
- tty->ops->flush_buffer(tty);
- if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+ rs_flush_buffer(tty);
+ tty_ldisc_flush(tty);
info->event = 0;
info->tty = NULL;
if (info->blocked_open) {
@@ -955,7 +916,6 @@ static const struct tty_operations hp_ops = {
.stop = rs_stop,
.start = rs_start,
.hangup = rs_hangup,
- .break_ctl = rs_break,
.wait_until_sent = rs_wait_until_sent,
.read_proc = rs_read_proc,
};
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 55ea52fe6ac..8c5e1de68fc 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -490,28 +490,6 @@ config ATARI_MFPSER
Note for Falcon users: You also have an MFP port, it's just not
wired to the outside... But you could use the port under Linux.
-config ATARI_SCC
- tristate "Atari SCC serial support"
- depends on ATARI
- ---help---
- If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
- LAN) and like to use them under Linux, say Y. All built-in SCC's are
- supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
- two connectors for channel A (Serial2 and LAN), they are visible as
- two separate devices.
-
- To compile this driver as a module, choose M here.
-
-config ATARI_SCC_DMA
- bool "Atari SCC serial DMA support"
- depends on ATARI_SCC
- help
- This enables DMA support for receiving data on channel A of the SCC.
- If you have a TT you may say Y here and read
- drivers/char/atari_SCC.README. All other users should say N here,
- because only the TT has SCC-DMA, even if your machine keeps claiming
- so at boot time.
-
config ATARI_MIDI
tristate "Atari MIDI serial support"
depends on ATARI
@@ -578,18 +556,6 @@ config MAC_HID
depends on INPUT_ADBHID
default y
-config ADB_KEYBOARD
- bool "Support for ADB keyboard (old driver)"
- depends on MAC && !INPUT_ADBHID
- help
- This option allows you to use an ADB keyboard attached to your
- machine. Note that this disables any other (ie. PS/2) keyboard
- support, even if your machine is physically capable of using both at
- the same time.
-
- If you use an ADB keyboard (4 pin connector), say Y here.
- If you use a PS/2 keyboard (6 pin connector), say N here.
-
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
@@ -640,7 +606,7 @@ config DN_SERIAL
config SERIAL_CONSOLE
bool "Support for serial port console"
- depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index b15173f28a2..8133dbc4496 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,7 +13,7 @@
# Copyright (C) 1994 by Hamish Macdonald
#
-KBUILD_DEFCONFIG := amiga_defconfig
+KBUILD_DEFCONFIG := multi_defconfig
# override top level makefile
AS += -m68020
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 50f5daab46b..df679d96b1c 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -36,14 +36,11 @@
#include <asm/machdep.h>
#include <asm/io.h>
-unsigned long amiga_model;
-EXPORT_SYMBOL(amiga_model);
+static unsigned long amiga_model;
unsigned long amiga_eclock;
EXPORT_SYMBOL(amiga_eclock);
-unsigned long amiga_masterclock;
-
unsigned long amiga_colorclock;
EXPORT_SYMBOL(amiga_colorclock);
@@ -51,7 +48,9 @@ unsigned long amiga_chipset;
EXPORT_SYMBOL(amiga_chipset);
unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
+EXPORT_SYMBOL(amiga_vblank);
+
+static unsigned char amiga_psfreq;
struct amiga_hw_present amiga_hw_present;
EXPORT_SYMBOL(amiga_hw_present);
@@ -92,8 +91,6 @@ static char *amiga_models[] __initdata = {
static char amiga_model_name[13] = "Amiga ";
static void amiga_sched_init(irq_handler_t handler);
-/* amiga specific irq functions */
-extern void amiga_init_IRQ(void);
static void amiga_get_model(char *model);
static int amiga_get_hardware_list(char *buffer);
/* amiga specific timer functions */
@@ -107,8 +104,6 @@ static void amiga_reset(void);
extern void amiga_init_sound(void);
static void amiga_mem_console_write(struct console *co, const char *b,
unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
- unsigned int count);
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on);
#endif
@@ -418,8 +413,7 @@ void __init config_amiga(void)
mach_heartbeat = amiga_heartbeat;
#endif
- /* Fill in the clock values (based on the 700 kHz E-Clock) */
- amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
+ /* Fill in the clock value (based on the 700 kHz E-Clock) */
amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
/* clear all DMA bits */
@@ -817,8 +811,8 @@ static void amiga_serial_putc(char c)
;
}
-void amiga_serial_console_write(struct console *co, const char *s,
- unsigned int count)
+static void amiga_serial_console_write(struct console *co, const char *s,
+ unsigned int count)
{
while (count--) {
if (*s == '\n')
@@ -827,7 +821,7 @@ void amiga_serial_console_write(struct console *co, const char *s,
}
}
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
void amiga_serial_puts(const char *s)
{
amiga_serial_console_write(NULL, s, strlen(s));
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 043ddbc61c7..702b15ccfab 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -20,14 +20,6 @@
#include <asm/atarihw.h>
#include <asm/atariints.h>
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-EXPORT_SYMBOL(atari_MFP_init_done);
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
-EXPORT_SYMBOL(atari_SCC_init_done);
-
/* Can be set somewhere, if a SCC master reset has already be done and should
* not be repeated; used by kgdb */
int atari_SCC_reset_done;
@@ -47,8 +39,8 @@ static inline void ata_mfp_out(char c)
mfp.usart_dta = c;
}
-void atari_mfp_console_write(struct console *co, const char *str,
- unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -66,8 +58,8 @@ static inline void ata_scc_out(char c)
scc.cha_b_data = c;
}
-void atari_scc_console_write(struct console *co, const char *str,
- unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -83,8 +75,8 @@ static inline void ata_midi_out(char c)
acia.mid_data = c;
}
-void atari_midi_console_write(struct console *co, const char *str,
- unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -136,7 +128,7 @@ static void atari_par_console_write(struct console *co, const char *str,
}
}
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
int atari_mfp_console_wait_key(struct console *co)
{
while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
@@ -166,11 +158,7 @@ int atari_midi_console_wait_key(struct console *co)
* SCC serial ports. They're used by the debugging interface, kgdb, and the
* serial console code.
*/
-#ifndef CONFIG_SERIAL_CONSOLE
static void __init atari_init_mfp_port(int cflag)
-#else
-void atari_init_mfp_port(int cflag)
-#endif
{
/*
* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
@@ -193,8 +181,6 @@ void atari_init_mfp_port(int cflag)
mfp.tim_dt_d = baud_table[baud];
mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
mfp.trn_stat |= 0x01; /* enable TX */
-
- atari_MFP_init_done = 1;
}
#define SCC_WRITE(reg, val) \
@@ -214,11 +200,7 @@ void atari_init_mfp_port(int cflag)
MFPDELAY(); \
} while (0)
-#ifndef CONFIG_SERIAL_CONSOLE
static void __init atari_init_scc_port(int cflag)
-#else
-void atari_init_scc_port(int cflag)
-#endif
{
extern int atari_SCC_reset_done;
static int clksrc_table[9] =
@@ -277,14 +259,9 @@ void atari_init_scc_port(int cflag)
SCC_WRITE(5, reg5 | 8);
atari_SCC_reset_done = 1;
- atari_SCC_init_done = 1;
}
-#ifndef CONFIG_SERIAL_CONSOLE
static void __init atari_init_midi_port(int cflag)
-#else
-void atari_init_midi_port(int cflag)
-#endif
{
int baud = cflag & CBAUD;
int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
diff --git a/arch/m68k/fpsp040/Makefile b/arch/m68k/fpsp040/Makefile
index 0214d2f6f8b..9506d883ace 100644
--- a/arch/m68k/fpsp040/Makefile
+++ b/arch/m68k/fpsp040/Makefile
@@ -10,7 +10,6 @@ obj-y := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
-EXTRA_AFLAGS := -traditional
EXTRA_LDFLAGS := -x
$(OS_OBJS): fpsp.h
diff --git a/arch/m68k/ifpsp060/Makefile b/arch/m68k/ifpsp060/Makefile
index 2fe8472cb5e..43b43504945 100644
--- a/arch/m68k/ifpsp060/Makefile
+++ b/arch/m68k/ifpsp060/Makefile
@@ -6,5 +6,4 @@
obj-y := fskeleton.o iskeleton.o os.o
-EXTRA_AFLAGS := -traditional
EXTRA_LDFLAGS := -x
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 7a62a718143..3a7f6222550 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -16,5 +16,3 @@ devres-y = ../../../kernel/irq/devres.o
obj-$(CONFIG_PCI) += bios32.o
obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index a9fb83a8c18..ea1e44da19b 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -26,6 +26,7 @@
#include <asm/bootinfo.h>
#include <asm/setup.h>
+#include <asm/fpu.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/machdep.h>
@@ -40,6 +41,11 @@
#include <asm/dvma.h>
#endif
+#if !FPSTATESIZE || !NR_IRQS
+#warning No CPU/platform type selected, your kernel will not work!
+#warning Are you building an allnoconfig kernel?
+#endif
+
unsigned long m68k_machtype;
EXPORT_SYMBOL(m68k_machtype);
unsigned long m68k_cputype;
@@ -116,6 +122,7 @@ extern int bvme6000_parse_bootinfo(const struct bi_record *);
extern int mvme16x_parse_bootinfo(const struct bi_record *);
extern int mvme147_parse_bootinfo(const struct bi_record *);
extern int hp300_parse_bootinfo(const struct bi_record *);
+extern int apollo_parse_bootinfo(const struct bi_record *);
extern void config_amiga(void);
extern void config_atari(void);
@@ -183,6 +190,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
unknown = mvme147_parse_bootinfo(record);
else if (MACH_IS_HP300)
unknown = hp300_parse_bootinfo(record);
+ else if (MACH_IS_APOLLO)
+ unknown = apollo_parse_bootinfo(record);
else
unknown = 1;
}
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 7537cc5e615..99b0784c055 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -1,6 +1,7 @@
/* ld script to make m68k Linux kernel */
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
OUTPUT_ARCH(m68k)
@@ -41,7 +42,7 @@ SECTIONS
_edata = .; /* End of data section */
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index cdc313e7c29..8a4919e4d36 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -1,6 +1,7 @@
/* ld script to make m68k Linux kernel */
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
OUTPUT_ARCH(m68k)
@@ -34,7 +35,7 @@ SECTIONS
_edata = .;
/* will be freed after init */
- . = ALIGN(8192); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
@@ -61,12 +62,12 @@ __init_begin = .;
}
SECURITY_INIT
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(8192);
+ . = ALIGN(PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
#endif
- . = ALIGN(8192);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
.data.init.task : { *(.data.init_task) }
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index a18af095cd7..af9abf8d9d9 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -2,7 +2,5 @@
# Makefile for m68k-specific library files..
#
-EXTRA_AFLAGS := -traditional
-
lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
checksum.o string.o uaccess.o
diff --git a/arch/m68k/mac/Makefile b/arch/m68k/mac/Makefile
index 1d265ba365a..daebd80bdef 100644
--- a/arch/m68k/mac/Makefile
+++ b/arch/m68k/mac/Makefile
@@ -2,5 +2,5 @@
# Makefile for Linux arch/m68k/mac source directory
#
-obj-y := config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
+obj-y := config.o macints.o iop.o via.o oss.o psc.o \
baboon.o macboing.o debug.o misc.o
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 673a1085984..dae9c982aa8 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -23,9 +23,7 @@
/* #define DEBUG_IRQS */
int baboon_present;
-volatile struct baboon *baboon;
-
-irqreturn_t baboon_irq(int, void *);
+static volatile struct baboon *baboon;
#if 0
extern int macide_ack_intr(struct ata_channel *);
@@ -50,20 +48,10 @@ void __init baboon_init(void)
}
/*
- * Register the Baboon interrupt dispatcher on nubus slot $C.
- */
-
-void __init baboon_register_interrupts(void)
-{
- request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
- "baboon", (void *) baboon);
-}
-
-/*
* Baboon interrupt handler. This works a lot like a VIA.
*/
-irqreturn_t baboon_irq(int irq, void *dev_id)
+static irqreturn_t baboon_irq(int irq, void *dev_id)
{
int irq_bit, irq_num;
unsigned char events;
@@ -95,6 +83,16 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/*
+ * Register the Baboon interrupt dispatcher on nubus slot $C.
+ */
+
+void __init baboon_register_interrupts(void)
+{
+ request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
+ "baboon", (void *) baboon);
+}
+
void baboon_irq_enable(int irq) {
#ifdef DEBUG_IRQUSE
printk("baboon_irq_enable(%d)\n", irq);
diff --git a/arch/m68k/mac/bootparse.c b/arch/m68k/mac/bootparse.c
deleted file mode 100644
index 36d22360982..00000000000
--- a/arch/m68k/mac/bootparse.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-
-/*
- * Booter vars
- */
-
-int boothowto;
-int _boothowto;
-
-/*
- * Called early to parse the environment (passed to us from the booter)
- * into a bootinfo struct. Will die as soon as we have our own booter
- */
-
-#define atol(x) simple_strtoul(x,NULL,0)
-
-void parse_booter(char *env)
-{
- char *name;
- char *value;
-#if 0
- while(0 && *env)
-#else
- while(*env)
-#endif
- {
- name=env;
- value=name;
- while(*value!='='&&*value)
- value++;
- if(*value=='=')
- *value++=0;
- env=value;
- while(*env)
- env++;
- env++;
-#if 0
- if(strcmp(name,"VIDEO_ADDR")==0)
- mac_mch.videoaddr=atol(value);
- if(strcmp(name,"ROW_BYTES")==0)
- mac_mch.videorow=atol(value);
- if(strcmp(name,"SCREEN_DEPTH")==0)
- mac_mch.videodepth=atol(value);
- if(strcmp(name,"DIMENSIONS")==0)
- mac_mch.dimensions=atol(value);
-#endif
- if(strcmp(name,"BOOTTIME")==0)
- mac_bi_data.boottime=atol(value);
- if(strcmp(name,"GMTBIAS")==0)
- mac_bi_data.gmtbias=atol(value);
- if(strcmp(name,"BOOTERVER")==0)
- mac_bi_data.bootver=atol(value);
- if(strcmp(name,"MACOS_VIDEO")==0)
- mac_bi_data.videological=atol(value);
- if(strcmp(name,"MACOS_SCC")==0)
- mac_bi_data.sccbase=atol(value);
- if(strcmp(name,"MACHINEID")==0)
- mac_bi_data.id=atol(value);
- if(strcmp(name,"MEMSIZE")==0)
- mac_bi_data.memsize=atol(value);
- if(strcmp(name,"SERIAL_MODEM_FLAGS")==0)
- mac_bi_data.serialmf=atol(value);
- if(strcmp(name,"SERIAL_MODEM_HSKICLK")==0)
- mac_bi_data.serialhsk=atol(value);
- if(strcmp(name,"SERIAL_MODEM_GPICLK")==0)
- mac_bi_data.serialgpi=atol(value);
- if(strcmp(name,"SERIAL_PRINT_FLAGS")==0)
- mac_bi_data.printmf=atol(value);
- if(strcmp(name,"SERIAL_PRINT_HSKICLK")==0)
- mac_bi_data.printhsk=atol(value);
- if(strcmp(name,"SERIAL_PRINT_GPICLK")==0)
- mac_bi_data.printgpi=atol(value);
- if(strcmp(name,"PROCESSOR")==0)
- mac_bi_data.cpuid=atol(value);
- if(strcmp(name,"ROMBASE")==0)
- mac_bi_data.rombase=atol(value);
- if(strcmp(name,"TIMEDBRA")==0)
- mac_bi_data.timedbra=atol(value);
- if(strcmp(name,"ADBDELAY")==0)
- mac_bi_data.adbdelay=atol(value);
- }
-#if 0 /* XXX: TODO with m68k_mach_* */
- /* Fill in the base stuff */
- boot_info.machtype=MACH_MAC;
- /* Read this from the macinfo we got ! */
-/* boot_info.cputype=CPU_68020|FPUB_68881;*/
-/* boot_info.memory[0].addr=0;*/
-/* boot_info.memory[0].size=((mac_bi_data.id>>7)&31)<<20;*/
- boot_info.num_memory=1; /* On a MacII */
- boot_info.ramdisk_size=0; /* For now */
- *boot_info.command_line=0;
-#endif
- }
-
-
-void print_booter(char *env)
-{
- char *name;
- char *value;
- while(*env)
- {
- name=env;
- value=name;
- while(*value!='='&&*value)
- value++;
- if(*value=='=')
- *value++=0;
- env=value;
- while(*env)
- env++;
- env++;
- printk("%s=%s\n", name,value);
- }
- }
-
-
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index ad3e3bacae3..c45e18449f3 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -46,7 +46,6 @@
/* Mac bootinfo struct */
struct mac_booter_data mac_bi_data;
-int mac_bisize = sizeof mac_bi_data;
/* New m68k bootinfo stuff and videobase */
@@ -55,10 +54,8 @@ extern struct mem_info m68k_memory[NUM_MEMINFO];
extern struct mem_info m68k_ramdisk;
-void *mac_env; /* Loaded by the boot asm */
-
/* The phys. video addr. - might be bogus on some machines */
-unsigned long mac_orig_videoaddr;
+static unsigned long mac_orig_videoaddr;
/* Mac specific timer functions */
extern unsigned long mac_gettimeoffset(void);
@@ -79,6 +76,8 @@ extern void mac_mksound(unsigned int, unsigned int);
extern void nubus_sweep_video(void);
static void mac_get_model(char *str);
+static void mac_identify(void);
+static void mac_report_hardware(void);
static void __init mac_sched_init(irq_handler_t vector)
{
@@ -765,7 +764,7 @@ static struct mac_model mac_data_table[] = {
}
};
-void __init mac_identify(void)
+static void __init mac_identify(void)
{
struct mac_model *m;
@@ -821,7 +820,7 @@ void __init mac_identify(void)
baboon_init();
}
-void __init mac_report_hardware(void)
+static void __init mac_report_hardware(void)
{
printk(KERN_INFO "Apple Macintosh %s\n", macintosh_config->name);
}
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index e8a57138b4a..2165740786a 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -51,6 +51,8 @@ extern void mac_serial_print(const char *);
static int peng, line;
#endif
+#if 0
+
void mac_debugging_short(int pos, short num)
{
#ifdef DEBUG_SCREEN
@@ -125,6 +127,8 @@ void mac_debugging_long(int pos, long addr)
#endif
}
+#endif /* 0 */
+
#ifdef DEBUG_SERIAL
/*
* TODO: serial debug code
@@ -142,12 +146,6 @@ struct mac_SCC {
# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
-/* Flag that serial port is already initialized and used */
-int mac_SCC_init_done;
-/* Can be set somewhere, if a SCC master reset has already be done and should
- * not be repeated; used by kgdb */
-int mac_SCC_reset_done;
-
static int scc_port = -1;
static struct console mac_console_driver = {
@@ -171,8 +169,8 @@ static struct console mac_console_driver = {
* this driver if Mac.
*/
-void mac_debug_console_write(struct console *co, const char *str,
- unsigned int count)
+static void mac_debug_console_write(struct console *co, const char *str,
+ unsigned int count)
{
mac_serial_print(str);
}
@@ -209,8 +207,8 @@ static inline void mac_scca_out(char c)
scc.cha_a_data = c;
}
-void mac_sccb_console_write(struct console *co, const char *str,
- unsigned int count)
+static void mac_sccb_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -219,8 +217,8 @@ void mac_sccb_console_write(struct console *co, const char *str,
}
}
-void mac_scca_console_write(struct console *co, const char *str,
- unsigned int count)
+static void mac_scca_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -265,14 +263,8 @@ void mac_scca_console_write(struct console *co, const char *str,
barrier(); \
} while(0)
-#ifndef CONFIG_SERIAL_CONSOLE
static void __init mac_init_scc_port(int cflag, int port)
-#else
-void mac_init_scc_port(int cflag, int port)
-#endif
{
- extern int mac_SCC_reset_done;
-
/*
* baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
*/
@@ -340,22 +332,9 @@ void mac_init_scc_port(int cflag, int port)
SCCA_WRITE(3, reg3 | 1);
SCCA_WRITE(5, reg5 | 8);
}
-
- mac_SCC_reset_done = 1;
- mac_SCC_init_done = 1;
}
#endif /* DEBUG_SERIAL */
-void mac_init_scca_port(int cflag)
-{
- mac_init_scc_port(cflag, 0);
-}
-
-void mac_init_sccb_port(int cflag)
-{
- mac_init_scc_port(cflag, 1);
-}
-
static int __init mac_debug_setup(char *arg)
{
if (!MACH_IS_MAC)
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 3c943d2ec57..43d83e054b8 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -30,8 +30,8 @@
int oss_present;
volatile struct mac_oss *oss;
-irqreturn_t oss_irq(int, void *);
-irqreturn_t oss_nubus_irq(int, void *);
+static irqreturn_t oss_irq(int, void *);
+static irqreturn_t oss_nubus_irq(int, void *);
extern irqreturn_t via1_irq(int, void *);
extern irqreturn_t mac_scc_dispatch(int, void *);
@@ -92,7 +92,7 @@ void __init oss_nubus_init(void)
* and SCSI; everything else is routed to its own autovector IRQ.
*/
-irqreturn_t oss_irq(int irq, void *dev_id)
+static irqreturn_t oss_irq(int irq, void *dev_id)
{
int events;
@@ -126,7 +126,7 @@ irqreturn_t oss_irq(int irq, void *dev_id)
* Unlike the VIA/RBV this is on its own autovector interrupt level.
*/
-irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
{
int events, irq_bit, i;
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index d66f723b17c..f84a4dd64f9 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -36,7 +36,7 @@ irqreturn_t psc_irq(int, void *);
* Debugging dump, used in various places to see what's going on.
*/
-void psc_debug_dump(void)
+static void psc_debug_dump(void)
{
int i;
@@ -55,7 +55,7 @@ void psc_debug_dump(void)
* expanded to cover what I think are the other 7 channels.
*/
-void psc_dma_die_die_die(void)
+static void psc_dma_die_die_die(void)
{
int i;
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index fa485df4160..f3b27d04a31 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -45,7 +45,7 @@ volatile long *via_memory_bogon=(long *)&via_memory_bogon;
int rbv_present;
int via_alt_mapping;
EXPORT_SYMBOL(via_alt_mapping);
-__u8 rbv_clear;
+static __u8 rbv_clear;
/*
* Globals for accessing the VIA chip registers without having to
diff --git a/arch/m68k/math-emu/Makefile b/arch/m68k/math-emu/Makefile
index 53994040181..a0935bf9836 100644
--- a/arch/m68k/math-emu/Makefile
+++ b/arch/m68k/math-emu/Makefile
@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
-EXTRA_AFLAGS := -traditional
-
#EXTRA_AFLAGS += -DFPU_EMU_DEBUG
#EXTRA_CFLAGS += -DFPU_EMU_DEBUG
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 30d34f28502..226795bdf35 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -285,7 +285,6 @@ void __init paging_init(void)
* to a couple of allocated pages
*/
empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
- memset(empty_zero_page, 0, PAGE_SIZE);
/*
* Set up SFC/DFC registers
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index 6a6513aa1ce..edceefc1887 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -53,7 +53,6 @@ void __init paging_init(void)
wp_works_ok = 0;
#endif
empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
- memset(empty_zero_page, 0, PAGE_SIZE);
address = PAGE_OFFSET;
pg_dir = swapper_pg_dir;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 476e18eca75..be9de2f3dc4 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,14 +41,12 @@ static void q40_get_model(char *model);
static int q40_get_hardware_list(char *buffer);
extern void q40_sched_init(irq_handler_t handler);
-extern unsigned long q40_gettimeoffset(void);
-extern int q40_hwclk(int, struct rtc_time *);
-extern unsigned int q40_get_ss(void);
-extern int q40_set_clock_mmss(unsigned long);
+static unsigned long q40_gettimeoffset(void);
+static int q40_hwclk(int, struct rtc_time *);
+static unsigned int q40_get_ss(void);
+static int q40_set_clock_mmss(unsigned long);
static int q40_get_rtc_pll(struct rtc_pll_info *pll);
static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset(void);
-void q40_halt(void);
extern void q40_waitbut(void);
void q40_set_vectors(void);
@@ -127,7 +125,7 @@ static void q40_heartbeat(int on)
}
#endif
-void q40_reset(void)
+static void q40_reset(void)
{
halted = 1;
printk("\n\n*******************************************\n"
@@ -137,7 +135,8 @@ void q40_reset(void)
while (1)
;
}
-void q40_halt(void)
+
+static void q40_halt(void)
{
halted = 1;
printk("\n\n*******************\n"
@@ -165,7 +164,8 @@ static unsigned int serports[] =
{
0x3f8,0x2f8,0x3e8,0x2e8,0
};
-void q40_disable_irqs(void)
+
+static void q40_disable_irqs(void)
{
unsigned i, j;
@@ -227,7 +227,7 @@ static inline unsigned char bin2bcd(unsigned char b)
}
-unsigned long q40_gettimeoffset(void)
+static unsigned long q40_gettimeoffset(void)
{
return 5000 * (ql_ticks != 0);
}
@@ -248,7 +248,7 @@ unsigned long q40_gettimeoffset(void)
* };
*/
-int q40_hwclk(int op, struct rtc_time *t)
+static int q40_hwclk(int op, struct rtc_time *t)
{
if (op) {
/* Write.... */
@@ -285,7 +285,7 @@ int q40_hwclk(int op, struct rtc_time *t)
return 0;
}
-unsigned int q40_get_ss(void)
+static unsigned int q40_get_ss(void)
{
return bcd2bin(Q40_RTC_SECS);
}
@@ -295,7 +295,7 @@ unsigned int q40_get_ss(void)
* clock is out by > 30 minutes. Logic lifted from atari code.
*/
-int q40_set_clock_mmss(unsigned long nowtime)
+static int q40_set_clock_mmss(unsigned long nowtime)
{
int retval = 0;
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile
index be1a8470d63..38ba0e0ceda 100644
--- a/arch/m68k/sun3/Makefile
+++ b/arch/m68k/sun3/Makefile
@@ -2,6 +2,6 @@
# Makefile for Linux arch/m68k/sun3 source directory
#
-obj-y := sun3ints.o sun3dvma.o sbus.o idprom.o
+obj-y := sun3ints.o sun3dvma.o idprom.o
obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index c0fbd278fbb..732087d0735 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@ extern char _text, _end;
char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
extern unsigned long sun3_gettimeoffset(void);
-extern void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(irq_handler_t handler);
extern void sun3_get_model (char* model);
extern void idprom_init (void);
extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -114,7 +114,8 @@ static void sun3_halt (void)
/* sun3 bootmem allocation */
-void __init sun3_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
+static void __init sun3_bootmem_alloc(unsigned long memory_start,
+ unsigned long memory_end)
{
unsigned long start_page;
@@ -164,7 +165,7 @@ void __init config_sun3(void)
sun3_bootmem_alloc(memory_start, memory_end);
}
-void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(irq_handler_t timer_routine)
{
sun3_disable_interrupts();
intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3/dvma.c b/arch/m68k/sun3/dvma.c
index d2b3093f240..d522eaab455 100644
--- a/arch/m68k/sun3/dvma.c
+++ b/arch/m68k/sun3/dvma.c
@@ -19,7 +19,7 @@
static unsigned long ptelist[120];
-inline unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
+static unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
{
unsigned long pte;
unsigned long j;
diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c
index dca6ab6a4ed..c86ac37d198 100644
--- a/arch/m68k/sun3/idprom.c
+++ b/arch/m68k/sun3/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.22 1996/11/13 05:09:25 davem Exp $
+/*
* idprom.c: Routines to load the idprom into kernel addresses and
* interpret the data contained within.
*
@@ -25,7 +25,7 @@ static struct idprom idprom_buffer;
* of the Sparc CPU and have a meaningful IDPROM machtype value that we
* know about. See asm-sparc/machines.h for empirical constants.
*/
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
/* First, Sun3's */
{ .name = "Sun 3/160 Series", .id_machtype = (SM_SUN3 | SM_3_160) },
{ .name = "Sun 3/50", .id_machtype = (SM_SUN3 | SM_3_50) },
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index fb0f6a20cc3..60f9d4500d7 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -55,7 +55,7 @@ unsigned char pmeg_ctx[PMEGS_NUM];
/* pointers to the mm structs for each task in each
context. 0xffffffff is a marker for kernel context */
-struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
+static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
[0] = (struct mm_struct *)0xffffffff
};
diff --git a/arch/m68k/sun3/prom/Makefile b/arch/m68k/sun3/prom/Makefile
index 6e48ae2a717..da7eac06bca 100644
--- a/arch/m68k/sun3/prom/Makefile
+++ b/arch/m68k/sun3/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.5 1995/11/25 00:59:48 davem Exp $
# Makefile for the Sun Boot PROM interface library under
# Linux.
#
diff --git a/arch/m68k/sun3/prom/console.c b/arch/m68k/sun3/prom/console.c
index 52c1427863d..2bcb6e4bfe5 100644
--- a/arch/m68k/sun3/prom/console.c
+++ b/arch/m68k/sun3/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.10 1996/12/18 06:46:54 tridge Exp $
+/*
* console.c: Routines that deal with sending and receiving IO
* to/from the current console device using the PROM.
*
@@ -104,8 +104,6 @@ prom_query_input_device()
return PROMDEV_ITTYB;
}
return PROMDEV_I_UNK;
- case PROM_AP1000:
- return PROMDEV_I_UNK;
};
}
#endif
@@ -166,8 +164,6 @@ prom_query_output_device()
};
}
break;
- case PROM_AP1000:
- return PROMDEV_I_UNK;
};
return PROMDEV_O_UNK;
}
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index 202adfcc316..d8e6349336b 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.9 1996/12/18 06:46:55 tridge Exp $
+/*
* init.c: Initialize internal variables used by the PROM
* library functions.
*
@@ -31,11 +31,6 @@ extern void prom_ranges_init(void);
void __init prom_init(struct linux_romvec *rp)
{
-#ifdef CONFIG_AP1000
- extern struct linux_romvec *ap_prom_init(void);
- rp = ap_prom_init();
-#endif
-
romvec = rp;
#ifndef CONFIG_SUN3
switch(romvec->pv_romvers) {
@@ -53,10 +48,6 @@ void __init prom_init(struct linux_romvec *rp)
prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
prom_halt();
break;
- case 42: /* why not :-) */
- prom_vers = PROM_AP1000;
- break;
-
default:
prom_printf("PROMLIB: Bad PROM version %d\n",
romvec->pv_romvers);
diff --git a/arch/m68k/sun3/prom/misc.c b/arch/m68k/sun3/prom/misc.c
index b88716f2c68..3d60e1337f7 100644
--- a/arch/m68k/sun3/prom/misc.c
+++ b/arch/m68k/sun3/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.15 1997/05/14 20:45:00 davem Exp $
+/*
* misc.c: Miscellaneous prom functions that don't belong
* anywhere else.
*
diff --git a/arch/m68k/sun3/prom/printf.c b/arch/m68k/sun3/prom/printf.c
index e7bfde377b5..df85018f487 100644
--- a/arch/m68k/sun3/prom/printf.c
+++ b/arch/m68k/sun3/prom/printf.c
@@ -1,4 +1,4 @@
-/* $Id: printf.c,v 1.5 1996/04/04 16:31:07 tridge Exp $
+/*
* printf.c: Internal prom library printf facility.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -37,10 +37,6 @@ prom_printf(char *fmt, ...)
bptr = ppbuf;
-#ifdef CONFIG_AP1000
- ap_write(1,bptr,strlen(bptr));
-#else
-
#ifdef CONFIG_KGDB
if (kgdb_initialized) {
printk("kgdb_initialized = %d\n", kgdb_initialized);
@@ -54,7 +50,6 @@ prom_printf(char *fmt, ...)
prom_putchar(ch);
}
#endif
-#endif
va_end(args);
return;
}
diff --git a/arch/m68k/sun3/sbus.c b/arch/m68k/sun3/sbus.c
deleted file mode 100644
index babdbfa3cda..00000000000
--- a/arch/m68k/sun3/sbus.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SBus helper functions
- *
- * Sun3 don't have a sbus, but many of the used devices are also
- * used on Sparc machines with sbus. To avoid having a lot of
- * duplicate code, we provide necessary glue stuff to make using
- * of the sbus driver code possible.
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-int __init sbus_init(void)
-{
- return 0;
-}
-
-void *sparc_alloc_io (u32 address, void *virtual, int len, char *name,
- u32 bus_type, int rdonly)
-{
- return (void *)address;
-}
-
-subsys_initcall(sbus_init);
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 8709677fa02..f9277e8b415 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -29,7 +29,7 @@ static inline void dvma_unmap_iommu(unsigned long a, int b)
extern void sun3_dvma_init(void);
#endif
-unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
+static unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
#define dvma_index(baddr) ((baddr - DVMA_START) >> DVMA_PAGE_SHIFT)
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index cf93481adb1..7364cd67455 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -30,7 +30,7 @@ void sun3_enable_interrupts(void)
sun3_enable_irq(0);
}
-int led_pattern[8] = {
+static int led_pattern[8] = {
~(0x80), ~(0x01),
~(0x40), ~(0x02),
~(0x20), ~(0x04),
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index b9c268c6b2f..8b054e7a8ae 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -392,7 +392,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
{
struct uart_icount *icount = &port->uart.icount;
- struct tty_struct *tty = port->uart.info->tty;
+ struct tty_struct *tty = port->uart.info->port.tty;
unsigned ix;
int count;
u8 st, ch, push, status, overrun;