diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/x86/kernel/cpu/amd.c | 94 |
1 files changed, 48 insertions, 46 deletions
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index cab4e562b5c..1a3e1bb4d75 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -20,7 +20,7 @@ * the chip setting when fixing the bug but they also tweaked some * performance at the same time.. */ - + extern void vide(void); __asm__(".align 4\nvide: ret"); @@ -81,7 +81,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #ifdef CONFIG_SMP unsigned long long value; - /* Disable TLB flush filter by setting HWCR.FFDIS on K8 + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 * bit 6 of msr C001_0015 * * Errata 63 for SH-B3 steppings @@ -102,15 +103,16 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) * no bus pipeline) */ - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + /* + * Bit 31 in normal CPUID used for nonstandard 3DNow ID; + * DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway + */ clear_bit(0*32+31, c->x86_capability); - + r = get_model_name(c); - switch(c->x86) - { - case 4: + switch (c->x86) { + case 4: /* * General Systems BIOSen alias the cpu frequency registers * of the Elan at 0x000df000. Unfortuantly, one of the Linux @@ -120,61 +122,60 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ #define CBAR_ENB (0x80000000) #define CBAR_KEY (0X000000CB) - if (c->x86_model==9 || c->x86_model == 10) { + if (c->x86_model == 9 || c->x86_model == 10) { if (inl (CBAR) & CBAR_ENB) outl (0 | CBAR_KEY, CBAR); } break; - case 5: - if( c->x86_model < 6 ) - { + case 5: + if (c->x86_model < 6) { /* Based on AMD doc 20734R - June 2000 */ - if ( c->x86_model == 0 ) { + if (c->x86_model == 0) { clear_bit(X86_FEATURE_APIC, c->x86_capability); set_bit(X86_FEATURE_PGE, c->x86_capability); } break; } - - if ( c->x86_model == 6 && c->x86_mask == 1 ) { + + if (c->x86_model == 6 && c->x86_mask == 1) { const int K6_BUG_LOOP = 1000000; int n; void (*f_vide)(void); unsigned long d, d2; - + printk(KERN_INFO "AMD K6 stepping B detected - "); - + /* - * It looks like AMD fixed the 2.6.2 bug and improved indirect + * It looks like AMD fixed the 2.6.2 bug and improved indirect * calls at the same time. */ n = K6_BUG_LOOP; f_vide = vide; rdtscl(d); - while (n--) + while (n--) f_vide(); rdtscl(d2); d = d2-d; - if (d > 20*K6_BUG_LOOP) + if (d > 20*K6_BUG_LOOP) printk("system stability may be impaired when more than 32 MB are used.\n"); - else + else printk("probably OK (after B9730xxxx).\n"); printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); } /* K6 with old style WHCR */ if (c->x86_model < 8 || - (c->x86_model== 8 && c->x86_mask < 8)) { + (c->x86_model == 8 && c->x86_mask < 8)) { /* We can only write allocate on the low 508Mb */ - if(mbytes>508) - mbytes=508; + if (mbytes > 508) + mbytes = 508; rdmsr(MSR_K6_WHCR, l, h); - if ((l&0x0000FFFF)==0) { + if ((l&0x0000FFFF) == 0) { unsigned long flags; - l=(1<<0)|((mbytes/4)<<1); + l = (1<<0)|((mbytes/4)<<1); local_irq_save(flags); wbinvd(); wrmsr(MSR_K6_WHCR, l, h); @@ -185,17 +186,17 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) break; } - if ((c->x86_model == 8 && c->x86_mask >7) || + if ((c->x86_model == 8 && c->x86_mask > 7) || c->x86_model == 9 || c->x86_model == 13) { /* The more serious chips .. */ - if(mbytes>4092) - mbytes=4092; + if (mbytes > 4092) + mbytes = 4092; rdmsr(MSR_K6_WHCR, l, h); - if ((l&0xFFFF0000)==0) { + if ((l&0xFFFF0000) == 0) { unsigned long flags; - l=((mbytes>>2)<<22)|(1<<16); + l = ((mbytes>>2)<<22)|(1<<16); local_irq_save(flags); wbinvd(); wrmsr(MSR_K6_WHCR, l, h); @@ -217,10 +218,11 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) break; } break; - case 6: /* An Athlon/Duron */ - - /* Bit 15 of Athlon specific MSR 15, needs to be 0 - * to enable SSE on Palomino/Morgan/Barton CPU's. + case 6: /* An Athlon/Duron */ + + /* + * Bit 15 of Athlon specific MSR 15, needs to be 0 + * to enable SSE on Palomino/Morgan/Barton CPU's. * If the BIOS didn't enable it already, enable it here. */ if (c->x86_model >= 6 && c->x86_model <= 10) { @@ -233,11 +235,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) } } - /* It's been determined by AMD that Athlons since model 8 stepping 1 + /* + * It's been determined by AMD that Athlons since model 8 stepping 1 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx * As per AMD technical note 27212 0.2 */ - if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) { + if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { rdmsr(MSR_K7_CLK_CTL, l, h); if ((l & 0xfff00000) != 0x20000000) { printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, @@ -256,7 +259,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) set_bit(X86_FEATURE_K8, c->x86_capability); break; case 6: - set_bit(X86_FEATURE_K7, c->x86_capability); + set_bit(X86_FEATURE_K7, c->x86_capability); break; } if (c->x86 >= 6) @@ -264,9 +267,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) display_cacheinfo(c); - if (cpuid_eax(0x80000000) >= 0x80000008) { + if (cpuid_eax(0x80000000) >= 0x80000008) c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - } #ifdef CONFIG_X86_HT /* @@ -308,14 +310,14 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) set_bit(X86_FEATURE_MFENCE_RDTSC, c->x86_capability); } -static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) +static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* AMD errata T13 (order #21922) */ if ((c->x86 == 6)) { if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */ size = 64; if (c->x86_model == 4 && - (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */ + (c->x86_mask == 0 || c->x86_mask == 1)) /* Tbird rev A1/A2 */ size = 256; } return size; @@ -323,16 +325,16 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned in static struct cpu_dev amd_cpu_dev __cpuinitdata = { .c_vendor = "AMD", - .c_ident = { "AuthenticAMD" }, + .c_ident = { "AuthenticAMD" }, .c_models = { { .vendor = X86_VENDOR_AMD, .family = 4, .model_names = { [3] = "486 DX/2", [7] = "486 DX/2-WB", - [8] = "486 DX/4", - [9] = "486 DX/4-WB", + [8] = "486 DX/4", + [9] = "486 DX/4-WB", [14] = "Am5x86-WT", - [15] = "Am5x86-WB" + [15] = "Am5x86-WB" } }, }, |