diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/Kconfig | 13 | ||||
-rw-r--r-- | arch/powerpc/kernel/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/kernel/asm-offsets.c | 6 | ||||
-rw-r--r-- | arch/powerpc/kernel/entry_32.S | 12 | ||||
-rw-r--r-- | arch/powerpc/kernel/prom.c | 3 | ||||
-rw-r--r-- | arch/powerpc/kernel/rtas.c (renamed from arch/ppc64/kernel/rtas.c) | 255 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/Kconfig | 5 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/rtas-fw.c | 138 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/rtas-fw.h | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/setup.c | 10 | ||||
-rw-r--r-- | arch/ppc64/Kconfig | 5 | ||||
-rw-r--r-- | arch/ppc64/kernel/Makefile | 2 |
13 files changed, 256 insertions, 199 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9f279e0d84f..ce5100cadd3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -276,6 +276,8 @@ config PPC_PSERIES depends on PPC_MULTIPLATFORM && PPC64 bool " IBM pSeries & new (POWER5-based) iSeries" select PPC_I8259 + select PPC_RTAS + select RTAS_ERROR_LOGGING default y config PPC_CHRP @@ -283,6 +285,7 @@ config PPC_CHRP depends on PPC_MULTIPLATFORM && PPC32 select PPC_I8259 select PPC_INDIRECT_PCI + select PPC_RTAS default y config PPC_PMAC @@ -317,6 +320,7 @@ config PPC_MAPLE config PPC_BPA bool " Broadband Processor Architecture" depends on PPC_MULTIPLATFORM && PPC64 + select PPC_RTAS config PPC_OF bool @@ -338,6 +342,15 @@ config MPIC bool default y +config PPC_RTAS + bool + default n + +config RTAS_ERROR_LOGGING + bool + depends on PPC_RTAS + default n + config MPIC_BROKEN_U3 bool depends on PPC_MAPLE diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index f5d8038fed5..eaedb7e6331 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_PPC64) += binfmt_elf32.o sys_ppc32.o ptrace32.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o +obj-$(CONFIG_PPC_RTAS) += rtas.o obj-$(CONFIG_IBMVIO) += vio.o ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 1c83abd9f37..710336a9f0f 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -36,11 +36,11 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/thread_info.h> +#include <asm/rtas.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/iSeries/HvLpEvent.h> -#include <asm/rtas.h> #include <asm/cache.h> #include <asm/systemcfg.h> #include <asm/compat.h> @@ -97,7 +97,7 @@ int main(void) DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size)); @@ -142,11 +142,11 @@ int main(void) DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); +#endif /* CONFIG_PPC64 */ /* RTAS */ DEFINE(RTASBASE, offsetof(struct rtas_t, base)); DEFINE(RTASENTRY, offsetof(struct rtas_t, entry)); -#endif /* CONFIG_PPC64 */ /* Interrupt register frame */ DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 37b4396ca97..960da7bea04 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -954,7 +954,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) * here so it's easy to add arch-specific sections later. * -- Cort */ -#ifdef CONFIG_PPC_OF +#ifdef CONFIG_PPC_RTAS /* * On CHRP, the Run-Time Abstraction Services (RTAS) have to be * called with the MMU off. @@ -963,14 +963,13 @@ _GLOBAL(enter_rtas) stwu r1,-INT_FRAME_SIZE(r1) mflr r0 stw r0,INT_FRAME_SIZE+4(r1) - lis r4,rtas_data@ha - lwz r4,rtas_data@l(r4) + LOADADDR(r4, rtas) lis r6,1f@ha /* physical return address for rtas */ addi r6,r6,1f@l tophys(r6,r6) tophys(r7,r1) - lis r8,rtas_entry@ha - lwz r8,rtas_entry@l(r8) + lwz r8,RTASENTRY(r4) + lwz r4,RTASBASE(r4) mfmsr r9 stw r9,8(r1) LOAD_MSR_KERNEL(r0,MSR_KERNEL) @@ -978,7 +977,6 @@ _GLOBAL(enter_rtas) MTMSRD(r0) /* don't get trashed */ li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) mtlr r6 - CLR_TOP32(r7) mtspr SPRN_SPRG2,r7 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 @@ -999,4 +997,4 @@ machine_check_in_rtas: twi 31,0,0 /* XXX load up BATs and panic */ -#endif /* CONFIG_PPC_OF */ +#endif /* CONFIG_PPC_RTAS */ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 8d0c78cbc0b..16ac15e73b4 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -110,9 +110,6 @@ struct device_node *of_chosen; struct device_node *dflt_interrupt_controller; int num_interrupt_controllers; -u32 rtas_data; -u32 rtas_entry; - /* * Wrapper for allocating memory for various data that needs to be * attached to device nodes as they are processed at boot or when diff --git a/arch/ppc64/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 36adab591bd..4d22eeeeb91 100644 --- a/arch/ppc64/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -25,29 +25,29 @@ #include <asm/page.h> #include <asm/param.h> #include <asm/system.h> -#include <asm/abs_addr.h> -#include <asm/udbg.h> #include <asm/delay.h> #include <asm/uaccess.h> +#include <asm/lmb.h> +#ifdef CONFIG_PPC64 #include <asm/systemcfg.h> -#include <asm/ppcdebug.h> +#endif -struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; - -struct rtas_t rtas = { +struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED }; EXPORT_SYMBOL(rtas); -char rtas_err_buf[RTAS_ERROR_LOG_MAX]; - DEFINE_SPINLOCK(rtas_data_buf_lock); -char rtas_data_buf[RTAS_DATA_BUF_SIZE]__page_aligned; +char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; unsigned long rtas_rmo_buf; -void -call_rtas_display_status(unsigned char c) +/* + * call_rtas_display_status and call_rtas_display_status_delay + * are designed only for very early low-level debugging, which + * is why the token is hard-coded to 10. + */ +void call_rtas_display_status(unsigned char c) { struct rtas_args *args = &rtas.args; unsigned long s; @@ -67,8 +67,7 @@ call_rtas_display_status(unsigned char c) spin_unlock_irqrestore(&rtas.lock, s); } -void -call_rtas_display_status_delay(unsigned char c) +void call_rtas_display_status_delay(unsigned char c) { static int pending_newline = 0; /* did last write end with unprinted newline? */ static int width = 16; @@ -92,8 +91,7 @@ call_rtas_display_status_delay(unsigned char c) } } -void -rtas_progress(char *s, unsigned short hex) +void rtas_progress(char *s, unsigned short hex) { struct device_node *root; int width, *p; @@ -209,18 +207,16 @@ rtas_progress(char *s, unsigned short hex) spin_unlock(&progress_lock); } -int -rtas_token(const char *service) +int rtas_token(const char *service) { int *tokp; - if (rtas.dev == NULL) { - PPCDBG(PPCDBG_RTAS,"\tNo rtas device in device-tree...\n"); + if (rtas.dev == NULL) return RTAS_UNKNOWN_SERVICE; - } tokp = (int *) get_property(rtas.dev, service, NULL); return tokp ? *tokp : RTAS_UNKNOWN_SERVICE; } +#ifdef CONFIG_RTAS_ERROR_LOGGING /* * Return the firmware-specified size of the error log buffer * for all rtas calls that require an error buffer argument. @@ -235,31 +231,38 @@ int rtas_get_error_log_max(void) rtas_error_log_max = rtas_token ("rtas-error-log-max"); if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) || (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) { - printk (KERN_WARNING "RTAS: bad log buffer size %d\n", rtas_error_log_max); + printk (KERN_WARNING "RTAS: bad log buffer size %d\n", + rtas_error_log_max); rtas_error_log_max = RTAS_ERROR_LOG_MAX; } return rtas_error_log_max; } +EXPORT_SYMBOL(rtas_get_error_log_max); +char rtas_err_buf[RTAS_ERROR_LOG_MAX]; +int rtas_last_error_token; + /** Return a copy of the detailed error text associated with the * most recent failed call to rtas. Because the error text * might go stale if there are any other intervening rtas calls, * this routine must be called atomically with whatever produced * the error (i.e. with rtas.lock still held from the previous call). */ -static int -__fetch_rtas_last_error(void) +static char *__fetch_rtas_last_error(char *altbuf) { struct rtas_args err_args, save_args; u32 bufsz; + char *buf = NULL; + + if (rtas_last_error_token == -1) + return NULL; bufsz = rtas_get_error_log_max(); - err_args.token = rtas_token("rtas-last-error"); + err_args.token = rtas_last_error_token; err_args.nargs = 2; err_args.nret = 1; - err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf); err_args.args[1] = bufsz; err_args.args[2] = 0; @@ -272,23 +275,38 @@ __fetch_rtas_last_error(void) err_args = rtas.args; rtas.args = save_args; - return err_args.args[2]; + /* Log the error in the unlikely case that there was one. */ + if (unlikely(err_args.args[2] == 0)) { + if (altbuf) { + buf = altbuf; + } else { + buf = rtas_err_buf; + if (mem_init_done) + buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); + } + if (buf) + memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); + } + + return buf; } +#define get_errorlog_buffer() kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL) + +#else /* CONFIG_RTAS_ERROR_LOGGING */ +#define __fetch_rtas_last_error(x) NULL +#define get_errorlog_buffer() NULL +#endif + int rtas_call(int token, int nargs, int nret, int *outputs, ...) { va_list list; - int i, logit = 0; + int i; unsigned long s; struct rtas_args *rtas_args; - char * buff_copy = NULL; + char *buff_copy = NULL; int ret; - PPCDBG(PPCDBG_RTAS, "Entering rtas_call\n"); - PPCDBG(PPCDBG_RTAS, "\ttoken = 0x%x\n", token); - PPCDBG(PPCDBG_RTAS, "\tnargs = %d\n", nargs); - PPCDBG(PPCDBG_RTAS, "\tnret = %d\n", nret); - PPCDBG(PPCDBG_RTAS, "\t&outputs = 0x%lx\n", outputs); if (token == RTAS_UNKNOWN_SERVICE) return -1; @@ -301,46 +319,25 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) rtas_args->nret = nret; rtas_args->rets = (rtas_arg_t *)&(rtas_args->args[nargs]); va_start(list, outputs); - for (i = 0; i < nargs; ++i) { + for (i = 0; i < nargs; ++i) rtas_args->args[i] = va_arg(list, rtas_arg_t); - PPCDBG(PPCDBG_RTAS, "\tnarg[%d] = 0x%x\n", i, rtas_args->args[i]); - } va_end(list); for (i = 0; i < nret; ++i) rtas_args->rets[i] = 0; - PPCDBG(PPCDBG_RTAS, "\tentering rtas with 0x%lx\n", - __pa(rtas_args)); enter_rtas(__pa(rtas_args)); - PPCDBG(PPCDBG_RTAS, "\treturned from rtas ...\n"); /* A -1 return code indicates that the last command couldn't be completed due to a hardware error. */ if (rtas_args->rets[0] == -1) - logit = (__fetch_rtas_last_error() == 0); - - ifppcdebug(PPCDBG_RTAS) { - for(i=0; i < nret ;i++) - udbg_printf("\tnret[%d] = 0x%lx\n", i, (ulong)rtas_args->rets[i]); - } + buff_copy = __fetch_rtas_last_error(NULL); if (nret > 1 && outputs != NULL) for (i = 0; i < nret-1; ++i) outputs[i] = rtas_args->rets[i+1]; ret = (nret > 0)? rtas_args->rets[0]: 0; - /* Log the error in the unlikely case that there was one. */ - if (unlikely(logit)) { - buff_copy = rtas_err_buf; - if (mem_init_done) { - buff_copy = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); - if (buff_copy) - memcpy(buff_copy, rtas_err_buf, - RTAS_ERROR_LOG_MAX); - } - } - /* Gotta do something different here, use global lock for now... */ spin_unlock_irqrestore(&rtas.lock, s); @@ -355,8 +352,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) /* Given an RTAS status code of 990n compute the hinted delay of 10^n * (last digit) milliseconds. For now we bound at n=5 (100 sec). */ -unsigned int -rtas_extended_busy_delay_time(int status) +unsigned int rtas_extended_busy_delay_time(int status) { int order = status - 9900; unsigned long ms; @@ -367,7 +363,7 @@ rtas_extended_busy_delay_time(int status) order = 5; /* bound */ /* Use microseconds for reasonable accuracy */ - for (ms=1; order > 0; order--) + for (ms = 1; order > 0; order--) ms *= 10; return ms; @@ -494,112 +490,23 @@ int rtas_set_indicator(int indicator, int index, int new_value) return rc; } -#define FLASH_BLOCK_LIST_VERSION (1UL) -static void -rtas_flash_firmware(void) -{ - unsigned long image_size; - struct flash_block_list *f, *next, *flist; - unsigned long rtas_block_list; - int i, status, update_token; - - update_token = rtas_token("ibm,update-flash-64-and-reboot"); - if (update_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); - printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); - return; - } - - /* NOTE: the "first" block list is a global var with no data - * blocks in the kernel data segment. We do this because - * we want to ensure this block_list addr is under 4GB. - */ - rtas_firmware_flash_list.num_blocks = 0; - flist = (struct flash_block_list *)&rtas_firmware_flash_list; - rtas_block_list = virt_to_abs(flist); - if (rtas_block_list >= 4UL*1024*1024*1024) { - printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); - return; - } - - printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); - /* Update the block_list in place. */ - image_size = 0; - for (f = flist; f; f = next) { - /* Translate data addrs to absolute */ - for (i = 0; i < f->num_blocks; i++) { - f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); - image_size += f->blocks[i].length; - } - next = f->next; - /* Don't translate NULL pointer for last entry */ - if (f->next) - f->next = (struct flash_block_list *)virt_to_abs(f->next); - else - f->next = NULL; - /* make num_blocks into the version/length field */ - f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); - } - - printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); - printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - rtas_progress("Flashing \n", 0x0); - rtas_progress("Please Wait... ", 0x0); - printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); - status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); - switch (status) { /* should only get "bad" status */ - case 0: - printk(KERN_ALERT "FLASH: success\n"); - break; - case -1: - printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); - break; - case -3: - printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); - break; - case -4: - printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); - break; - default: - printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); - break; - } -} - -void rtas_flash_bypass_warning(void) -{ - printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); - printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); -} - - -void -rtas_restart(char *cmd) +void rtas_restart(char *cmd) { - if (rtas_firmware_flash_list.next) - rtas_flash_firmware(); - printk("RTAS system-reboot returned %d\n", rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); for (;;); } -void -rtas_power_off(void) +void rtas_power_off(void) { - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); /* allow power on only with power button press */ printk("RTAS power-off returned %d\n", rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); for (;;); } -void -rtas_halt(void) +void rtas_halt(void) { - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); rtas_power_off(); } @@ -632,9 +539,8 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) { struct rtas_args args; unsigned long flags; - char * buff_copy; + char *buff_copy, *errbuf = NULL; int nargs; - int err_rc = 0; if (!capable(CAP_SYS_ADMIN)) return -EPERM; @@ -653,7 +559,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) nargs * sizeof(rtas_arg_t)) != 0) return -EFAULT; - buff_copy = kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL); + buff_copy = get_errorlog_buffer(); spin_lock_irqsave(&rtas.lock, flags); @@ -665,19 +571,14 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) /* A -1 return code indicates that the last command couldn't be completed due to a hardware error. */ - if (args.rets[0] == -1) { - err_rc = __fetch_rtas_last_error(); - if ((err_rc == 0) && buff_copy) { - memcpy(buff_copy, rtas_err_buf, RTAS_ERROR_LOG_MAX); - } - } + if (args.rets[0] == -1) + errbuf = __fetch_rtas_last_error(buff_copy); spin_unlock_irqrestore(&rtas.lock, flags); if (buff_copy) { - if ((args.rets[0] == -1) && (err_rc == 0)) { - log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0); - } + if (errbuf) + log_error(errbuf, ERR_TYPE_RTAS_LOG, 0); kfree(buff_copy); } @@ -690,6 +591,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) return 0; } +#ifdef CONFIG_SMP /* This version can't take the spinlock, because it never returns */ struct rtas_args rtas_stop_self_args = { @@ -714,6 +616,7 @@ void rtas_stop_self(void) panic("Alas, I survived.\n"); } +#endif /* * Call early during boot, before mem init or bootmem, to retreive the RTAS @@ -722,6 +625,8 @@ void rtas_stop_self(void) */ void __init rtas_initialize(void) { + unsigned long rtas_region = RTAS_INSTANTIATE_MAX; + /* Get RTAS dev node and fill up our "rtas" structure with infos * about it. */ @@ -743,26 +648,27 @@ void __init rtas_initialize(void) } else rtas.dev = NULL; } + if (!rtas.dev) + return; + /* If RTAS was found, allocate the RMO buffer for it and look for * the stop-self token if any */ - if (rtas.dev) { - unsigned long rtas_region = RTAS_INSTANTIATE_MAX; - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) - rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); - - rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, - rtas_region); +#ifdef CONFIG_PPC64 + if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); +#endif + rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); #ifdef CONFIG_HOTPLUG_CPU - rtas_stop_self_args.token = rtas_token("stop-self"); + rtas_stop_self_args.token = rtas_token("stop-self"); #endif /* CONFIG_HOTPLUG_CPU */ - } - +#ifdef CONFIG_RTAS_ERROR_LOGGING + rtas_last_error_token = rtas_token("rtas-last-error"); +#endif } -EXPORT_SYMBOL(rtas_firmware_flash_list); EXPORT_SYMBOL(rtas_token); EXPORT_SYMBOL(rtas_call); EXPORT_SYMBOL(rtas_data_buf); @@ -772,4 +678,3 @@ EXPORT_SYMBOL(rtas_get_sensor); EXPORT_SYMBOL(rtas_get_power_level); EXPORT_SYMBOL(rtas_set_power_level); EXPORT_SYMBOL(rtas_set_indicator); -EXPORT_SYMBOL(rtas_get_error_log_max); diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 7a3b6fc4d97..2d57f588151 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -21,11 +21,6 @@ config EEH depends on PPC_PSERIES default y if !EMBEDDED -config PPC_RTAS - bool - depends on PPC_PSERIES || PPC_BPA - default y - config RTAS_PROC bool "Proc interface to RTAS" depends on PPC_RTAS diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 4c817304fc2..d5c160b789e 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,4 +1,4 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o + setup.o iommu.o rtas-fw.o ras.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c new file mode 100644 index 00000000000..15d81d758ca --- /dev/null +++ b/arch/powerpc/platforms/pseries/rtas-fw.c @@ -0,0 +1,138 @@ +/* + * + * Procedures for firmware flash updates on pSeries systems. + * + * Peter Bergner, IBM March 2001. + * Copyright (C) 2001 IBM. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <stdarg.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/semaphore.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/param.h> +#include <asm/system.h> +#include <asm/abs_addr.h> +#include <asm/udbg.h> +#include <asm/delay.h> +#include <asm/uaccess.h> +#include <asm/systemcfg.h> + +#include "rtas-fw.h" + +struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; + +#define FLASH_BLOCK_LIST_VERSION (1UL) + +static void rtas_flash_firmware(void) +{ + unsigned long image_size; + struct flash_block_list *f, *next, *flist; + unsigned long rtas_block_list; + int i, status, update_token; + + update_token = rtas_token("ibm,update-flash-64-and-reboot"); + if (update_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); + printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); + return; + } + + /* NOTE: the "first" block list is a global var with no data + * blocks in the kernel data segment. We do this because + * we want to ensure this block_list addr is under 4GB. + */ + rtas_firmware_flash_list.num_blocks = 0; + flist = (struct flash_block_list *)&rtas_firmware_flash_list; + rtas_block_list = virt_to_abs(flist); + if (rtas_block_list >= 4UL*1024*1024*1024) { + printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); + return; + } + + printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); + /* Update the block_list in place. */ + image_size = 0; + for (f = flist; f; f = next) { + /* Translate data addrs to absolute */ + for (i = 0; i < f->num_blocks; i++) { + f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); + image_size += f->blocks[i].length; + } + next = f->next; + /* Don't translate NULL pointer for last entry */ + if (f->next) + f->next = (struct flash_block_list *)virt_to_abs(f->next); + else + f->next = NULL; + /* make num_blocks into the version/length field */ + f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); + } + + printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); + printk(KERN_ALERT "FLASH: performing flash and reboot\n"); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); + printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); + status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); + switch (status) { /* should only get "bad" status */ + case 0: + printk(KERN_ALERT "FLASH: success\n"); + break; + case -1: + printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); + break; + case -3: + printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); + break; + case -4: + printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); + break; + default: + printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); + break; + } +} + +void rtas_flash_bypass_warning(void) +{ + printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); + printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); +} + + +void rtas_fw_restart(char *cmd) +{ + if (rtas_firmware_flash_list.next) + rtas_flash_firmware(); + rtas_restart(cmd); +} + +void rtas_fw_power_off(void) +{ + if (rtas_firmware_flash_list.next) + rtas_flash_bypass_warning(); + rtas_power_off(); +} + +void rtas_fw_halt(void) +{ + if (rtas_firmware_flash_list.next) + rtas_flash_bypass_warning(); + rtas_halt(); +} + +EXPORT_SYMBOL(rtas_firmware_flash_list); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h new file mode 100644 index 00000000000..e70fa69974a --- /dev/null +++ b/arch/powerpc/platforms/pseries/rtas-fw.h @@ -0,0 +1,3 @@ +void rtas_fw_restart(char *cmd); +void rtas_fw_power_off(void); +void rtas_fw_halt(void); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 0fa5beae6d1..7e7e556e6b4 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/ppc/kernel/setup.c + * 64-bit pSeries and RS/6000 setup code. * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas @@ -67,6 +67,8 @@ #include <asm/i8259.h> #include <asm/udbg.h> +#include "rtas-fw.h" + #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else @@ -589,9 +591,9 @@ struct machdep_calls __initdata pSeries_md = { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .irq_bus_setup = pSeries_irq_bus_setup, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, + .restart = rtas_fw_restart, + .power_off = rtas_fw_power_off, + .halt = rtas_fw_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, .get_boot_time = rtas_get_boot_time, diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 963f519b771..8cc73cc1b4c 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -318,6 +318,11 @@ config PPC_RTAS depends on PPC_PSERIES || PPC_BPA default y +config RTAS_ERROR_LOGGING + bool + depends on PPC_RTAS + default y + config RTAS_PROC bool "Proc interface to RTAS" depends on PPC_RTAS diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 2c541c6652b..83ecefdcfef 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_MODULES) += ppc_ksyms.o endif -obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o +obj-$(CONFIG_PPC_RTAS) += rtas_pci.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_LPARCFG) += lparcfg.o |