diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/frv/Kconfig | 1 | ||||
-rw-r--r-- | arch/frv/include/asm/atomic.h | 68 | ||||
-rw-r--r-- | arch/frv/include/asm/perf_counter.h | 17 | ||||
-rw-r--r-- | arch/frv/include/asm/system.h | 2 | ||||
-rw-r--r-- | arch/frv/kernel/frv_ksyms.c | 4 | ||||
-rw-r--r-- | arch/frv/lib/Makefile | 4 | ||||
-rw-r--r-- | arch/frv/lib/atomic-ops.S | 3 | ||||
-rw-r--r-- | arch/frv/lib/atomic64-ops.S | 162 | ||||
-rw-r--r-- | arch/frv/lib/perf_counter.c | 19 | ||||
-rw-r--r-- | arch/sh/Kconfig.debug | 4 | ||||
-rw-r--r-- | arch/sh/boards/mach-se/7206/io.c | 2 | ||||
-rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 110 | ||||
-rw-r--r-- | arch/sh/configs/migor_defconfig | 53 | ||||
-rw-r--r-- | arch/sh/configs/se7724_defconfig | 25 | ||||
-rw-r--r-- | arch/sh/include/asm/perf_counter.h | 2 | ||||
-rw-r--r-- | arch/sh/include/asm/syscall_32.h | 1 | ||||
-rw-r--r-- | arch/sh/include/mach-se/mach/se7724.h | 5 | ||||
-rw-r--r-- | arch/sh/mm/fault_32.c | 61 | ||||
-rw-r--r-- | arch/sh/mm/tlbflush_64.c | 15 | ||||
-rw-r--r-- | arch/x86/Kconfig | 15 | ||||
-rw-r--r-- | arch/x86/include/asm/proto.h | 11 | ||||
-rw-r--r-- | arch/x86/kernel/e820.c | 16 | ||||
-rw-r--r-- | arch/x86/kernel/pci-dma.c | 2 |
23 files changed, 526 insertions, 76 deletions
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 8a5bd7a9c6f..b86e19c9b5b 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -7,6 +7,7 @@ config FRV default y select HAVE_IDE select HAVE_ARCH_TRACEHOOK + select HAVE_PERF_COUNTERS config ZONE_DMA bool diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index 0409d981fd3..00a57af79af 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v) #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) #define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +/* + * 64-bit atomic ops + */ +typedef struct { + volatile long long counter; +} atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +static inline long long atomic64_read(atomic64_t *v) +{ + long long counter; + + asm("ldd%I1 %M1,%0" + : "=e"(counter) + : "m"(v->counter)); + return counter; +} + +static inline void atomic64_set(atomic64_t *v, long long i) +{ + asm volatile("std%I0 %1,%M0" + : "=m"(v->counter) + : "e"(i)); +} + +extern long long atomic64_inc_return(atomic64_t *v); +extern long long atomic64_dec_return(atomic64_t *v); +extern long long atomic64_add_return(long long i, atomic64_t *v); +extern long long atomic64_sub_return(long long i, atomic64_t *v); + +static inline long long atomic64_add_negative(long long i, atomic64_t *v) +{ + return atomic64_add_return(i, v) < 0; +} + +static inline void atomic64_add(long long i, atomic64_t *v) +{ + atomic64_add_return(i, v); +} + +static inline void atomic64_sub(long long i, atomic64_t *v) +{ + atomic64_sub_return(i, v); +} + +static inline void atomic64_inc(atomic64_t *v) +{ + atomic64_inc_return(v); +} + +static inline void atomic64_dec(atomic64_t *v) +{ + atomic64_dec_return(v); +} + +#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0) + /*****************************************************************************/ /* * exchange value with memory */ +extern uint64_t __xchg_64(uint64_t i, volatile void *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define xchg(ptr, x) \ @@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v); #define tas(ptr) (xchg((ptr), 1)) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new)) +#define atomic_xchg(v, new) (xchg(&(v)->counter, new)) +#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter)) +#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter)) static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) { diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h new file mode 100644 index 00000000000..ccf726e61b2 --- /dev/null +++ b/arch/frv/include/asm/perf_counter.h @@ -0,0 +1,17 @@ +/* FRV performance counter support + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PERF_COUNTER_H +#define _ASM_PERF_COUNTER_H + +#define PERF_COUNTER_INDEX_OFFSET 0 + +#endif /* _ASM_PERF_COUNTER_H */ diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h index 7742ec000cc..efd22d9077a 100644 --- a/arch/frv/include/asm/system.h +++ b/arch/frv/include/asm/system.h @@ -208,6 +208,8 @@ extern void free_initmem(void); * - if (*ptr == test) then orig = *ptr; *ptr = test; * - if (*ptr != test) then orig = *ptr; */ +extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define cmpxchg(ptr, test, new) \ diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c index 0316b3c50ef..a89803b58b9 100644 --- a/arch/frv/kernel/frv_ksyms.c +++ b/arch/frv/kernel/frv_ksyms.c @@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return); EXPORT_SYMBOL(__xchg_32); EXPORT_SYMBOL(__cmpxchg_32); #endif +EXPORT_SYMBOL(atomic64_add_return); +EXPORT_SYMBOL(atomic64_sub_return); +EXPORT_SYMBOL(__xchg_64); +EXPORT_SYMBOL(__cmpxchg_64); EXPORT_SYMBOL(__debug_bug_printk); EXPORT_SYMBOL(__delay_loops_MHz); diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile index 08be305c9f4..0a377210c89 100644 --- a/arch/frv/lib/Makefile +++ b/arch/frv/lib/Makefile @@ -4,5 +4,5 @@ lib-y := \ __ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \ - checksum.o memcpy.o memset.o atomic-ops.o \ - outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o + checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \ + outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S index ee0ac905fb0..5e9e6ab5dd0 100644 --- a/arch/frv/lib/atomic-ops.S +++ b/arch/frv/lib/atomic-ops.S @@ -163,11 +163,10 @@ __cmpxchg_32: ld.p @(gr11,gr0),gr8 orcr cc7,cc7,cc3 subcc gr8,gr9,gr7,icc0 - bne icc0,#0,1f + bnelr icc0,#0 cst.p gr10,@(gr11,gr0) ,cc3,#1 corcc gr29,gr29,gr0 ,cc3,#1 beq icc3,#0,0b -1: bralr .size __cmpxchg_32, .-__cmpxchg_32 diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S new file mode 100644 index 00000000000..b6194eeac12 --- /dev/null +++ b/arch/frv/lib/atomic64-ops.S @@ -0,0 +1,162 @@ +/* kernel atomic64 operations + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/spr-regs.h> + + .text + .balign 4 + + +############################################################################### +# +# long long atomic64_inc_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_inc_return + .type atomic64_inc_return,@function +atomic64_inc_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addicc gr9,#1,gr9,icc0 + addxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_inc_return, .-atomic64_inc_return + +############################################################################### +# +# long long atomic64_dec_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_dec_return + .type atomic64_dec_return,@function +atomic64_dec_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subicc gr9,#1,gr9,icc0 + subxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_dec_return, .-atomic64_dec_return + +############################################################################### +# +# long long atomic64_add_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_add_return + .type atomic64_add_return,@function +atomic64_add_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addcc gr9,gr5,gr9,icc0 + addx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_add_return, .-atomic64_add_return + +############################################################################### +# +# long long atomic64_sub_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_sub_return + .type atomic64_sub_return,@function +atomic64_sub_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subcc gr9,gr5,gr9,icc0 + subx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_sub_return, .-atomic64_sub_return + +############################################################################### +# +# uint64_t __xchg_64(uint64_t i, uint64_t *v) +# +############################################################################### + .globl __xchg_64 + .type __xchg_64,@function +__xchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + cstd.p gr4,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __xchg_64, .-__xchg_64 + +############################################################################### +# +# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v) +# +############################################################################### + .globl __cmpxchg_64 + .type __cmpxchg_64,@function +__cmpxchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 + subcc gr8,gr4,gr0,icc0 + subcc.p gr9,gr5,gr0,icc1 + bnelr icc0,#0 + bnelr icc1,#0 + cstd.p gr10,@(gr12,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __cmpxchg_64, .-__cmpxchg_64 + diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c new file mode 100644 index 00000000000..2000feecd57 --- /dev/null +++ b/arch/frv/lib/perf_counter.c @@ -0,0 +1,19 @@ +/* Performance counter handling + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include <linux/perf_counter.h> + +/* + * mark the performance counter as pending + */ +void set_perf_counter_pending(void) +{ +} diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8ece0b5bd02..39224b57c6e 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -61,10 +61,6 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. -config DEBUG_BOOTMEM - depends on DEBUG_KERNEL - bool "Debug BOOTMEM initialization" - config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 9c3a33210d6..180455642a4 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port) unsigned short se7206_inw(unsigned long port) { - return *port2adr(port);; + return *port2adr(port); } void se7206_outb(unsigned char value, unsigned long port) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd558b..c050a8d76df 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -23,6 +23,8 @@ #include <media/sh_mobile_ceu.h> #include <asm/io.h> #include <asm/heartbeat.h> +#include <asm/sh_eth.h> +#include <asm/clock.h> #include <asm/sh_keysc.h> #include <cpu/sh7724.h> #include <mach-se/mach/se7724.h> @@ -272,6 +274,34 @@ static struct platform_device keysc_device = { }, }; +/* SH Eth */ +static struct resource sh_eth_resources[] = { + [0] = { + .start = SH_ETH_ADDR, + .end = SH_ETH_ADDR + 0x1FC, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 91, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +struct sh_eth_plat_data sh_eth_plat = { + .phy = 0x1f, /* SMSC LAN8187 */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = &sh_eth_plat, + }, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .resource = sh_eth_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &sh_eth_device, }; +#define EEPROM_OP 0xBA206000 +#define EEPROM_ADR 0xBA206004 +#define EEPROM_DATA 0xBA20600C +#define EEPROM_STAT 0xBA206010 +#define EEPROM_STRT 0xBA206014 +static int __init sh_eth_is_eeprom_ready(void) +{ + int t = 10000; + + while (t--) { + if (!ctrl_inw(EEPROM_STAT)) + return 1; + cpu_relax(); + } + + printk(KERN_ERR "ms7724se can not access to eeprom\n"); + return 0; +} + +static void __init sh_eth_init(void) +{ + int i; + u16 mac[3]; + + /* check EEPROM status */ + if (!sh_eth_is_eeprom_ready()) + return; + + /* read MAC addr from EEPROM */ + for (i = 0 ; i < 3 ; i++) { + ctrl_outw(0x0, EEPROM_OP); /* read */ + ctrl_outw(i*2, EEPROM_ADR); + ctrl_outw(0x1, EEPROM_STRT); + if (!sh_eth_is_eeprom_ready()) + return; + + mac[i] = ctrl_inw(EEPROM_DATA); + mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + } + + /* reset sh-eth */ + ctrl_outl(0x1, SH_ETH_ADDR + 0x0); + + /* set MAC addr */ + ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); + ctrl_outl((mac[2]), SH_ETH_MALR); +} + #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 @@ -302,7 +381,8 @@ static int __init devices_setup(void) ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ - (1 << 12)), /* USB0 */ + (1 << 12) | /* USB0 */ + (1 << 14)), /* RMII */ FPGA_OUT); /* enable IRQ 0,1,2 */ @@ -374,7 +454,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO0_CLK, NULL); gpio_request(GPIO_FN_VIO0_FLD, NULL); gpio_request(GPIO_FN_VIO0_HD, NULL); - platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20); /* enable CEU1 */ gpio_request(GPIO_FN_VIO1_D7, NULL); @@ -389,7 +469,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO1_HD, NULL); gpio_request(GPIO_FN_VIO1_VD, NULL); gpio_request(GPIO_FN_VIO1_CLK, NULL); - platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); @@ -404,6 +484,28 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT1, NULL); gpio_request(GPIO_FN_KEYOUT0, NULL); + /* + * enable SH-Eth + * + * please remove J33 pin from your board !! + * + * ms7724 board should not use GPIO_FN_LNKSTA pin + * So, This time PTX5 is set to input pin + */ + gpio_request(GPIO_FN_RMII_RXD0, NULL); + gpio_request(GPIO_FN_RMII_RXD1, NULL); + gpio_request(GPIO_FN_RMII_TXD0, NULL); + gpio_request(GPIO_FN_RMII_TXD1, NULL); + gpio_request(GPIO_FN_RMII_REF_CLK, NULL); + gpio_request(GPIO_FN_RMII_TX_EN, NULL); + gpio_request(GPIO_FN_RMII_RX_ER, NULL); + gpio_request(GPIO_FN_RMII_CRS_DV, NULL); + gpio_request(GPIO_FN_MDIO, NULL); + gpio_request(GPIO_FN_MDC, NULL); + gpio_request(GPIO_PTX5, NULL); + gpio_direction_input(GPIO_PTX5); + sh_eth_init(); + if (sw & SW41_B) { /* SVGA */ lcdc_info.ch[0].lcd_cfg.xres = 800; @@ -437,7 +539,7 @@ static int __init devices_setup(void) } return platform_add_devices(ms7724se_devices, - ARRAY_SIZE(ms7724se_devices)); + ARRAY_SIZE(ms7724se_devices)); } device_initcall(devices_setup); diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index da627d22c00..b18cfd39cac 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" # # Bus options @@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +CONFIG_LOGO_SUPERH_VGA16=y +# CONFIG_LOGO_SUPERH_CLUT224 is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index 3840270283e..3ee783a0a07 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 16:09:05 2009 +# Mon Jun 29 16:28:43 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -88,10 +91,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y # # Performance Counters # +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y @@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -# CONFIG_SH_ETH is not set +CONFIG_SH_ETH=y CONFIG_SMC91X=y # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set @@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h index a8153c2aa6f..61c2b40c802 100644 --- a/arch/sh/include/asm/perf_counter.h +++ b/arch/sh/include/asm/perf_counter.h @@ -2,6 +2,6 @@ #define __ASM_SH_PERF_COUNTER_H /* SH only supports software counters through this interface. */ -#define set_perf_counter_pending() do { } while (0) +static inline void set_perf_counter_pending(void) {} #endif /* __ASM_SH_PERF_COUNTER_H */ diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h index 5bc34681d99..6f83f2cc45c 100644 --- a/arch/sh/include/asm/syscall_32.h +++ b/arch/sh/include/asm/syscall_32.h @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/err.h> #include <asm/ptrace.h> /* The system call number is given by the user in R3 */ diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h index 74164b60d0d..29514a39d0f 100644 --- a/arch/sh/include/mach-se/mach/se7724.h +++ b/arch/sh/include/mach-se/mach/se7724.h @@ -20,6 +20,11 @@ */ #include <asm/addrspace.h> +/* SH Eth */ +#define SH_ETH_ADDR (0xA4600000) +#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0) +#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8) + #define PA_LED (0xba203000) /* 8bit LED */ #define IRQ_MODE (0xba200010) #define IRQ0_SR (0xba200014) diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index cc8ddbdf3d7..71925946f1e 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -15,12 +15,28 @@ #include <linux/mm.h> #include <linux/hardirq.h> #include <linux/kprobes.h> -#include <linux/marker.h> +#include <linux/perf_counter.h> #include <asm/io_trapped.h> #include <asm/system.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> +static inline int notify_page_fault(struct pt_regs *regs, int trap) +{ + int ret = 0; + +#ifdef CONFIG_KPROBES + if (!user_mode(regs)) { + preempt_disable(); + if (kprobe_running() && kprobe_fault_handler(regs, trap)) + ret = 1; + preempt_enable(); + } +#endif + + return ret; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + mm = tsk->mm; + + if (unlikely(notify_page_fault(regs, lookup_exception_vector()))) + return; + /* Only enable interrupts if they were on before the fault */ - if ((regs->sr & SR_IMASK) != SR_IMASK) { - trace_hardirqs_on(); + if ((regs->sr & SR_IMASK) != SR_IMASK) local_irq_enable(); - } - mm = tsk->mm; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* * If we're in an interrupt or have no user @@ -141,10 +160,15 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); return; @@ -245,22 +269,6 @@ do_sigbus: goto no_context; } -static inline int notify_page_fault(struct pt_regs *regs, int trap) -{ - int ret = 0; - -#ifdef CONFIG_KPROBES - if (!user_mode(regs)) { - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, trap)) - ret = 1; - preempt_enable(); - } -#endif - - return ret; -} - /* * Called with interrupts disabled. */ @@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, pmd_t *pmd; pte_t *pte; pte_t entry; - int ret = 0; - - if (notify_page_fault(regs, lookup_exception_vector())) - goto out; - - ret = 1; + int ret = 1; /* * We don't take page faults for P1, P2, and parts of P4, these diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c index fcbb6e135ce..3ce40ea3482 100644 --- a/arch/sh/mm/tlbflush_64.c +++ b/arch/sh/mm/tlbflush_64.c @@ -3,7 +3,7 @@ * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes) - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -20,6 +20,7 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/smp.h> +#include <linux/perf_counter.h> #include <linux/interrupt.h> #include <asm/system.h> #include <asm/io.h> @@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, /* Not an IO address, so reenable interrupts */ local_irq_enable(); + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. @@ -195,10 +198,16 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } /* If we get here, the page fault has been handled. Do the TLB refill now from the newly-setup PTE, to avoid having to fault again right diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d1430ef6b4f..c07f7220590 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1913,25 +1913,14 @@ config DMAR_DEFAULT_ON recommended you say N here while the DMAR code remains experimental. -config DMAR_GFX_WA - def_bool y - prompt "Support for Graphics workaround" - depends on DMAR - ---help--- - Current Graphics drivers tend to use physical address - for DMA and avoid using DMA APIs. Setting this config - option permits the IOMMU driver to set a unity map for - all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA. - config DMAR_FLOPPY_WA def_bool y depends on DMAR ---help--- - Floppy disk drivers are know to bypass DMA API calls + Floppy disk drivers are known to bypass DMA API calls thereby failing to work when IOMMU is enabled. This workaround will setup a 1:1 mapping for the first - 16M to make floppy (an ISA device) work. + 16MiB to make floppy (an ISA device) work. config INTR_REMAP bool "Support for Interrupt Remapping (EXPERIMENTAL)" diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h index 49fb3ecf3bb..621f56d7312 100644 --- a/arch/x86/include/asm/proto.h +++ b/arch/x86/include/asm/proto.h @@ -22,7 +22,14 @@ extern int reboot_force; long do_arch_prctl(struct task_struct *task, int code, unsigned long addr); -#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1)) -#define round_down(x, y) ((x) & ~((y) - 1)) +/* + * This looks more complex than it should be. But we need to + * get the type for the ~ right in round_down (it needs to be + * as wide as the result!), and we want to evaluate the macro + * arguments just once each. + */ +#define __round_mask(x,y) ((__typeof__(x))((y)-1)) +#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1) +#define round_down(x,y) ((x) & ~__round_mask(x,y)) #endif /* _ASM_X86_PROTO_H */ diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 7271fa33d79..c4ca89d9aaf 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1383,6 +1383,8 @@ static unsigned long ram_alignment(resource_size_t pos) return 32*1024*1024; } +#define MAX_RESOURCE_SIZE ((resource_size_t)-1) + void __init e820_reserve_resources_late(void) { int i; @@ -1400,17 +1402,19 @@ void __init e820_reserve_resources_late(void) * avoid stolen RAM: */ for (i = 0; i < e820.nr_map; i++) { - struct e820entry *entry = &e820_saved.map[i]; - resource_size_t start, end; + struct e820entry *entry = &e820.map[i]; + u64 start, end; if (entry->type != E820_RAM) continue; start = entry->addr + entry->size; - end = round_up(start, ram_alignment(start)); - if (start == end) + end = round_up(start, ram_alignment(start)) - 1; + if (end > MAX_RESOURCE_SIZE) + end = MAX_RESOURCE_SIZE; + if (start >= end) continue; - reserve_region_with_split(&iomem_resource, start, - end - 1, "RAM buffer"); + reserve_region_with_split(&iomem_resource, start, end, + "RAM buffer"); } } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 47630479b06..1a041bcf506 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -211,11 +211,11 @@ static __init int iommu_setup(char *p) #ifdef CONFIG_SWIOTLB if (!strncmp(p, "soft", 4)) swiotlb = 1; +#endif if (!strncmp(p, "pt", 2)) { iommu_pass_through = 1; return 1; } -#endif gart_parse_options(p); |