diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/ppc64/kernel/head.S | 353 |
1 files changed, 174 insertions, 179 deletions
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 13c03648a60..eb54f0548b0 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -52,9 +52,8 @@ * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x3fff : Interrupt support - * 0x4000 - 0x4fff : NACA - * 0x6000 : iSeries and common interrupt prologs + * 0x3000 - 0x6fff : interrupt support, iSeries and common interrupt prologs + * 0x7000 - 0x7fff : FWNMI data area * 0x9000 - 0x9fff : Initial segment table */ @@ -501,17 +500,35 @@ system_call_pSeries: STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) STD_EXCEPTION_PSERIES(0x1700, altivec_assist) + . = 0x3000 + +/*** pSeries interrupt support ***/ + /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(0x3000, performance_monitor) + STD_EXCEPTION_PSERIES(., performance_monitor) - . = 0x3100 + .align 7 _GLOBAL(do_stab_bolted_pSeries) mtcrf 0x80,r12 mfspr r12,SPRG2 EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) +/* + * Vectors for the FWNMI option. Share common code. + */ + .globl system_reset_fwnmi +system_reset_fwnmi: + HMT_MEDIUM + mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - . = 0x6100 + .globl machine_check_fwnmi +machine_check_fwnmi: + HMT_MEDIUM + mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) + EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ @@ -656,51 +673,8 @@ hardware_interrupt_iSeries_masked: ld r13,PACA_EXGEN+EX_R13(r13) rfid b . /* prevent speculative execution */ -#endif - -/* - * Data area reserved for FWNMI option. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS -#include "lparmap.s" #endif /* CONFIG_PPC_ISERIES */ -/* - * Vectors for the FWNMI option. Share common code. - */ - . = 0x8000 - .globl system_reset_fwnmi -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - .globl machine_check_fwnmi -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - /* - * Space for the initial segment table - * For LPAR, the hypervisor must fill in at least one entry - * before we get control (with relocate on) - */ - . = STAB0_PHYS_ADDR - .globl __start_stab -__start_stab: - - . = (STAB0_PHYS_ADDR + PAGE_SIZE) - .globl __end_stab -__end_stab: - - /*** Common interrupt handlers ***/ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) @@ -891,6 +865,62 @@ fp_unavailable_common: bl .kernel_fp_unavailable_exception BUG_OPCODE +/* + * load_up_fpu(unused, unused, tsk) + * Disable FP for the task which had the FPU previously, + * and save its floating-point registers in its thread_struct. + * Enables the FPU for use in the kernel on return. + * On SMP we know the fpu is free, since we give it up every + * switch (ie, no lazy save of the FP registers). + * On entry: r13 == 'current' && last_task_used_math != 'current' + */ +_STATIC(load_up_fpu) + mfmsr r5 /* grab the current MSR */ + ori r5,r5,MSR_FP + mtmsrd r5 /* enable use of fpu now */ + isync +/* + * For SMP, we don't do lazy FPU switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_fpu in switch_to. + * + */ +#ifndef CONFIG_SMP + ld r3,last_task_used_math@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Save FP state to last_task_used_math's THREAD struct */ + addi r4,r4,THREAD + SAVE_32FPRS(0, r4) + mffs fr0 + stfd fr0,THREAD_FPSCR(r4) + /* Disable FP for last_task_used_math */ + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + li r6,MSR_FP|MSR_FE0|MSR_FE1 + andc r4,r4,r6 + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + /* enable use of FP after return */ + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + ld r4,THREAD_FPEXC_MODE(r5) + ori r12,r12,MSR_FP + or r12,r12,r4 + std r12,_MSR(r1) + lfd fr0,THREAD_FPSCR(r5) + mtfsf 0xff,fr0 + REST_32FPRS(0, r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + std r4,0(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + b fast_exception_return + .align 7 .globl altivec_unavailable_common altivec_unavailable_common: @@ -906,6 +936,80 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bl .altivec_unavailable_exception b .ret_from_except +#ifdef CONFIG_ALTIVEC +/* + * load_up_altivec(unused, unused, tsk) + * Disable VMX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + * On SMP we know the VMX is free, since we give it up every + * switch (ie, no lazy save of the vector registers). + * On entry: r13 == 'current' && last_task_used_altivec != 'current' + */ +_STATIC(load_up_altivec) + mfmsr r5 /* grab the current MSR */ + oris r5,r5,MSR_VEC@h + mtmsrd r5 /* enable use of VMX now */ + isync + +/* + * For SMP, we don't do lazy VMX switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_altvec in switch_to. + * VRSAVE isn't dealt with here, that is done in the normal context + * switch code. Note that we could rely on vrsave value to eventually + * avoid saving all of the VREGs here... + */ +#ifndef CONFIG_SMP + ld r3,last_task_used_altivec@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Save VMX state to last_task_used_altivec's THREAD struct */ + addi r4,r4,THREAD + SAVE_32VRS(0,r5,r4) + mfvscr vr0 + li r10,THREAD_VSCR + stvx vr0,r10,r4 + /* Disable VMX for last_task_used_altivec */ + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r6,MSR_VEC@h + andc r4,r4,r6 + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + /* Hack: if we get an altivec unavailable trap with VRSAVE + * set to all zeros, we assume this is a broken application + * that fails to set it properly, and thus we switch it to + * all 1's + */ + mfspr r4,SPRN_VRSAVE + cmpdi 0,r4,0 + bne+ 1f + li r4,-1 + mtspr SPRN_VRSAVE,r4 +1: + /* enable use of VMX after return */ + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + oris r12,r12,MSR_VEC@h + std r12,_MSR(r1) + li r4,1 + li r10,THREAD_VSCR + stw r4,THREAD_USED_VR(r5) + lvx vr0,r10,r5 + mtvscr vr0 + REST_32VRS(0,r4,r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + std r4,0(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + b fast_exception_return +#endif /* CONFIG_ALTIVEC */ + /* * Hash table stuff */ @@ -1152,6 +1256,27 @@ unrecov_slb: bl .unrecoverable_exception b 1b +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: + .space PAGE_SIZE + + /* + * Space for the initial segment table + * For LPAR, the hypervisor must fill in at least one entry + * before we get control (with relocate on) + */ + . = STAB0_PHYS_ADDR + .globl __start_stab +__start_stab: + + . = (STAB0_PHYS_ADDR + PAGE_SIZE) + .globl __end_stab +__end_stab: /* * On pSeries, secondary processors spin in the following code. @@ -1416,62 +1541,6 @@ _GLOBAL(copy_and_flush) copy_to_here: /* - * load_up_fpu(unused, unused, tsk) - * Disable FP for the task which had the FPU previously, - * and save its floating-point registers in its thread_struct. - * Enables the FPU for use in the kernel on return. - * On SMP we know the fpu is free, since we give it up every - * switch (ie, no lazy save of the FP registers). - * On entry: r13 == 'current' && last_task_used_math != 'current' - */ -_STATIC(load_up_fpu) - mfmsr r5 /* grab the current MSR */ - ori r5,r5,MSR_FP - mtmsrd r5 /* enable use of fpu now */ - isync -/* - * For SMP, we don't do lazy FPU switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_fpu in switch_to. - * - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_math@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save FP state to last_task_used_math's THREAD struct */ - addi r4,r4,THREAD - SAVE_32FPRS(0, r4) - mffs fr0 - stfd fr0,THREAD_FPSCR(r4) - /* Disable FP for last_task_used_math */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r6,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of FP after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - ld r4,THREAD_FPEXC_MODE(r5) - ori r12,r12,MSR_FP - or r12,r12,r4 - std r12,_MSR(r1) - lfd fr0,THREAD_FPSCR(r5) - mtfsf 0xff,fr0 - REST_32FPRS(0, r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return - -/* * disable_kernel_fp() * Disable the FPU. */ @@ -1515,81 +1584,7 @@ _GLOBAL(giveup_fpu) #endif /* CONFIG_SMP */ blr - #ifdef CONFIG_ALTIVEC - -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return - /* * disable_kernel_altivec() * Disable the VMX. |