diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-pxa/irq.c | 72 |
1 files changed, 70 insertions, 2 deletions
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 9f7499b6d43..4619d5fe606 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -38,11 +38,33 @@ static void pxa_unmask_low_irq(unsigned int irq) ICMR |= (1 << (irq + PXA_IRQ_SKIP)); } +static int pxa_set_wake(unsigned int irq, unsigned int on) +{ + u32 mask; + + switch (irq) { + case IRQ_RTCAlrm: + mask = PWER_RTC; + break; +#ifdef CONFIG_PXA27x + /* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */ +#endif + default: + return -EINVAL; + } + if (on) + PWER |= mask; + else + PWER &= ~mask; + return 0; +} + static struct irq_chip pxa_internal_chip_low = { .name = "SC", .ack = pxa_mask_low_irq, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, + .set_wake = pxa_set_wake, }; #if PXA_INTERNAL_IRQS > 32 @@ -70,6 +92,26 @@ static struct irq_chip pxa_internal_chip_high = { #endif +/* Note that if an input/irq line ever gets changed to an output during + * suspend, the relevant PWER, PRER, and PFER bits should be cleared. + */ +#ifdef CONFIG_PXA27x + +/* PXA27x: Various gpios can issue wakeup events. This logic only + * handles the simple cases, not the WEMUX2 and WEMUX3 options + */ +#define PXA27x_GPIO_NOWAKE_MASK \ + ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) +#define WAKEMASK(gpio) \ + (((gpio) <= 15) \ + ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ + : ((gpio == 35) ? (1 << 24) : 0)) +#else + +/* pxa 210, 250, 255, 26x: gpios 0..15 can issue wakeups */ +#define WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0) +#endif + /* * PXA GPIO edge detection for IRQs: * IRQs are generated on Falling-Edge, Rising-Edge, or both. @@ -83,9 +125,11 @@ static long GPIO_IRQ_mask[4]; static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { int gpio, idx; + u32 mask; gpio = IRQ_TO_GPIO(irq); idx = gpio >> 5; + mask = WAKEMASK(gpio); if (type == IRQT_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or @@ -105,14 +149,20 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) if (type & __IRQT_RISEDGE) { /* printk("rising "); */ __set_bit (gpio, GPIO_IRQ_rising_edge); - } else + PRER |= mask; + } else { __clear_bit (gpio, GPIO_IRQ_rising_edge); + PRER &= ~mask; + } if (type & __IRQT_FALEDGE) { /* printk("falling "); */ __set_bit (gpio, GPIO_IRQ_falling_edge); - } else + PFER |= mask; + } else { __clear_bit (gpio, GPIO_IRQ_falling_edge); + PFER &= ~mask; + } /* printk("edges\n"); */ @@ -130,12 +180,29 @@ static void pxa_ack_low_gpio(unsigned int irq) GEDR0 = (1 << (irq - IRQ_GPIO0)); } +static int pxa_set_gpio_wake(unsigned int irq, unsigned int on) +{ + int gpio = IRQ_TO_GPIO(irq); + u32 mask = WAKEMASK(gpio); + + if (!mask) + return -EINVAL; + + if (on) + PWER |= mask; + else + PWER &= ~mask; + return 0; +} + + static struct irq_chip pxa_low_gpio_chip = { .name = "GPIO-l", .ack = pxa_ack_low_gpio, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, .set_type = pxa_gpio_irq_type, + .set_wake = pxa_set_gpio_wake, }; /* @@ -244,6 +311,7 @@ static struct irq_chip pxa_muxed_gpio_chip = { .mask = pxa_mask_muxed_gpio, .unmask = pxa_unmask_muxed_gpio, .set_type = pxa_gpio_irq_type, + .set_wake = pxa_set_gpio_wake, }; |